From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from lists.gentoo.org ([140.105.134.102] helo=robin.gentoo.org) by nuthatch.gentoo.org with esmtp (Exim 4.60) (envelope-from ) id 1GONeB-0003sI-2Z for garchives@archives.gentoo.org; Sat, 16 Sep 2006 00:03:03 +0000 Received: from robin.gentoo.org (localhost [127.0.0.1]) by robin.gentoo.org (8.13.8/8.13.6) with SMTP id k8G008pe025111; Sat, 16 Sep 2006 00:00:08 GMT Received: from bullet.espersunited.com (adsl-70-234-122-254.dsl.tul2ok.sbcglobal.net [70.234.122.254]) by robin.gentoo.org (8.13.8/8.13.6) with ESMTP id k8FNrCVR024250 for ; Fri, 15 Sep 2006 23:53:12 GMT Received: from camille.espersunited.com ([192.168.1.1]) by bullet.espersunited.com (8.13.7/8.13.4) with ESMTP id k8FNrBsn014414 for ; Fri, 15 Sep 2006 18:53:11 -0500 Subject: Re: [gentoo-user] OT - MythTV problems From: Michael Sullivan To: gentoo-user@lists.gentoo.org In-Reply-To: <5bdc1c8b0609151104s764b5693h694aade82fd48cd5@mail.gmail.com> References: <1158334538.11680.7.camel@bullet.espersunited.com> <5bdc1c8b0609150938r75bd3473ka7299038cdc1ccf3@mail.gmail.com> <1158339682.11883.3.camel@bullet.espersunited.com> <5bdc1c8b0609151104s764b5693h694aade82fd48cd5@mail.gmail.com> Content-Type: text/plain Date: Fri, 15 Sep 2006 18:53:11 -0500 Message-Id: <1158364391.11477.1.camel@bullet.espersunited.com> Precedence: bulk List-Post: List-Help: List-Unsubscribe: List-Subscribe: List-Id: Gentoo Linux mail X-BeenThere: gentoo-user@gentoo.org Reply-to: gentoo-user@lists.gentoo.org Mime-Version: 1.0 X-Mailer: Evolution 2.6.2 Content-Transfer-Encoding: 7bit X-Archives-Salt: 610fd2ee-645b-4a9f-800c-141b6b514672 X-Archives-Hash: 2095a86830b563d1ec094847740f66be On Fri, 2006-09-15 at 11:04 -0700, Mark Knecht wrote: > On 9/15/06, Michael Sullivan wrote: > > > > > OK. I did what you said, and I do get a signal from /dev/video0 now, > > That's good... > > > but mythfrontend still won't show LiveTV. > > That's not good... > > > > > > > If it's helpful, here's my dmesg info: > > > > camille ~ # dmesg | grep 'ivtv' > > ivtv: ==================== START INIT IVTV ==================== > > ivtv: version 0.7.0 (tagged release) loading > > ivtv: Linux version: 2.6.17-gentoo-r8 SMP mod_unload 486 gcc-4.1 > > ivtv: In case of problems please include the debug info between > > > > > total) > > ivtv0: Create encoder radio stream > > ivtv0: Initialized Hauppauge WinTV PVR-250, card #0 > > ivtv: ==================== END INIT IVTV ==================== > > ivtv0: Removed Hauppauge WinTV PVR-250, card #0 > > I do not understand this message just above. I've never seen that before. > > > > ivtv: ==================== START INIT IVTV ==================== > > ivtv: version 0.7.0 (tagged release) loading > > ivtv: Linux version: 2.6.17-gentoo-r8 SMP mod_unload 486 gcc-4.1 > > > > ivtv0: Initialized Hauppauge WinTV PVR-250, card #0 > > ivtv: ==================== END INIT IVTV ==================== > > ivtv0: Removed Hauppauge WinTV PVR-250, card #0 > > And again....... > > > > ivtv: ==================== START INIT IVTV ==================== > > ivtv: version 0.7.0 (tagged release) loading > > ivtv: Linux version: 2.6.17-gentoo-r8 SMP mod_unload 486 gcc-4.1 > > ivtv: In case of problems please include the debug info between > > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > > ivtv: any module options, when mailing the ivtv-users mailinglist. > > ivtv0: Autodetected Hauppauge WinTV PVR-250 card (cx23416 based) > > tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) > > tda9887 0-0043: chip found @ 0x86 (ivtv i2c driver #0) > > saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) > > msp3400 0-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0) > > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > > ivtv0: Encoder revision: 0x02050032 > > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB > > total) > > ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB > > total) > > ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB > > total) > > ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB > > total) > > ivtv0: Create encoder radio stream > > ivtv0: Initialized Hauppauge WinTV PVR-250, card #0 > > ivtv: ==================== END INIT IVTV ==================== > > How many PVR-250's are in this machine? Two or three? > > Here's what mine has: > > Linux video capture interface: v1.00 > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.7.0 (tagged release) loading > ivtv: Linux version: 2.6.17-gentoo-r2 SMP preempt mod_unload PENTIUM4 gcc-3.4 > ivtv: In case of problems please include the debug info between > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > ivtv: any module options, when mailing the ivtv-users mailinglist. > ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) > ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 22 (level, low) -> IRQ 21 > ivtv0: Unreasonably low latency timer, setting to 64 (was 32) > tveeprom 0-0050: Hauppauge model 26032, rev C199, serial# 8095579 > tveeprom 0-0050: tuner model is TCL 2002N 5H (idx 99, type 50) > tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) > tveeprom 0-0050: audio processor is CX25841 (idx 35) > tveeprom 0-0050: decoder processor is CX25841 (idx 28) > tveeprom 0-0050: has no radio, has IR remote > tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) > cx25840 0-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0) > cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes) > wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > ivtv0: Encoder revision: 0x02050032 > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) > ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) > ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) > ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) > tuner 0-0061: type set to 50 (TCL 2002N) > ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 > ivtv: ====================== NEXT CARD ====================== > ivtv1: Autodetected Hauppauge WinTV PVR-250 card (cx23416 based) > ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 17 (level, low) -> IRQ 22 > ivtv1: Unreasonably low latency timer, setting to 64 (was 32) > tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1) > tveeprom 1-0050: Hauppauge model 32062, rev C182, serial# 7913638 > tveeprom 1-0050: tuner model is LG TAPC H791F (idx 82, type 39) > tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) > tveeprom 1-0050: audio processor is MSP3445 (idx 12) > tveeprom 1-0050: decoder processor is SAA7115 (idx 19) > tveeprom 1-0050: has no radio, has IR remote > saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #1) > msp3400 1-0040: MSP3445G-B8 found @ 0x80 (ivtv i2c driver #1) > msp3400 1-0040: MSP3445G-B8 supports radio, mode is autodetect and autoselect > ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > ivtv1: Encoder revision: 0x02050032 > ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) > ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) > ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) > ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) > tuner 1-0061: type set to 39 (LG NTSC (newer TAPC series)) > ivtv1: Initialized Hauppauge WinTV PVR-250, card #1 > ivtv: ==================== END INIT IVTV ==================== > > > I have a sneaky suspicion that you possibly have some ivtv-0.4.5 stuff > left over. I've had that happen a number of time. Best I can advise I > would suggest emerge -C on ivtv, then clean out the existing > /lib/modules/2.6.17-gentoo-r8. I'd probably delete the whole > directory. I'd then run make modules_install from the kernel source to > set it up again from scratch. I'd then reemerge ivtv-0.7 again and > either modprobe or reboot. > > I've never seen these messages about removing cards but they seem like > part of the problem. > > Note: We are running a slightly older SMP kernel here with no problems: > > dragonfly modules.d # uname -a > Linux dragonfly 2.6.17-gentoo-r2 #3 SMP PREEMPT Tue Aug 15 09:41:09 > PDT 2006 i686 Intel(R) Pentium(R) 4 CPU 3.00GHz GNU/Linux > dragonfly modules.d # > > > Maybe it's specific to 2.6.17-gentoo-r8? You could try backing up to > -r2 that I'm running. > > Good luck, > Mark OK. I installed the 2.6.17-gentoo-r2 kernel and remerged ivtv, then rebooted. It still doesn't work. Here's the info: camille ~ # dmesg | grep 'ivtv' ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.7.0 (tagged release) loading ivtv: Linux version: 2.6.17-gentoo-r2 SMP mod_unload 486 gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-250 card (cx23416 based) ivtv0: Unreasonably low latency timer, setting to 64 (was 32) tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) tda9887 0-0043: chip found @ 0x86 (ivtv i2c driver #0) saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) msp3400 0-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0) ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Create encoder radio stream ivtv0: Initialized Hauppauge WinTV PVR-250, card #0 ivtv: ==================== END INIT IVTV ==================== camille ~ # michael@camille ~ $ mythfrontend 2006-09-15 18:50:33.924 Using runtime prefix = /usr 2006-09-15 18:50:34.010 New DB connection, total: 1 2006-09-15 18:50:34.017 Connected to database 'mythconverg' at host: localhost 2006-09-15 18:50:34.020 Total desktop dim: 1024x768, with 1 screen[s]. 2006-09-15 18:50:34.025 Using screen 0, 1024x768 at 0,0 2006-09-15 18:50:34.037 Current Schema Version: 1123 2006-09-15 18:50:34.038 mythfrontend version: 0.19.20060121-2 www.mythtv.org 2006-09-15 18:50:34.038 Enabled verbose msgs: important general 2006-09-15 18:50:34.513 lang0: eng 2006-09-15 18:50:34.513 lang: eng 2006-09-15 18:50:34.547 lang1: eng 2006-09-15 18:50:34.547 lang: eng 2006-09-15 18:50:34.665 Total desktop dim: 1024x768, with 1 screen[s]. 2006-09-15 18:50:34.668 Using screen 0, 1024x768 at 0,0 2006-09-15 18:50:34.669 Switching to square mode (G.A.N.T.) mythtv: could not connect to socket mythtv: No such file or directory lirc_init failed for mythtv, see preceding messages 2006-09-15 18:50:35.099 Joystick disabled. 2006-09-15 18:50:35.236 Registering Internal as a media playback plugin. 2006-09-15 18:50:36.059 Starting media monitor. 2006-09-15 18:50:39.381 New DB connection, total: 2 2006-09-15 18:50:39.383 Connected to database 'mythconverg' at host: localhost 2006-09-15 18:50:39.442 Connecting to backend server: 192.168.1.3:6543 (try 1 of 5) 2006-09-15 18:50:39.452 Using protocol version 26 2006-09-15 18:50:39.483 TV: Attempting to change from None to WatchingLiveTV 2006-09-15 18:50:39.491 Using protocol version 26 2006-09-15 18:50:59.864 TV Error: StartRecorder() -- timed out waiting for recorder to start 2006-09-15 18:50:59.864 TV Error: LiveTV not successfully started 2006-09-15 18:50:59.883 TV: Deleting TV Chain in destructor Any ideas? -- gentoo-user@gentoo.org mailing list