* [gentoo-user] OT - GLSlideshow and nvidia (I think)
@ 2006-07-16 14:24 Michael Sullivan
2006-07-16 14:43 ` [gentoo-user] OT - GLSlideshow and nvidia (I think) (no it is sis) Hemmann, Volker Armin
` (2 more replies)
0 siblings, 3 replies; 10+ messages in thread
From: Michael Sullivan @ 2006-07-16 14:24 UTC (permalink / raw
To: gentoo-user
Since the upgrade to modular X my wife has not been able to view her
favourite screesaver (our cats.) Whenever she runs the GLSlideshow
screensaver, she gets the following error:
Xlib extension GLX missing on display ":0.0"
glslideshow display :0.0 does not support the GLX extension
I googled for this error and everywhere I looked people were fixing this
error by installing proper nvidia modules. My problem is that I know
nothing about nvidia or even device drivers in general. Do I need to
compile nvidia drivers into her kernel? If so, which ones? Here's the
lspci output from her computer:
catherine X11 # lspci -v
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 741/741GX/M741
Host (rev 03)
Subsystem: Elitegroup Computer Systems Unknown device 1b13
Flags: bus master, medium devsel, latency 32
Memory at d0000000 (32-bit, non-prefetchable) [size=128M]
Capabilities: [c0] AGP version 3.5
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port
(virtual PCI-to-PCI bridge) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e1000000-e10fffff
Prefetchable memory behind bridge: d8000000-dfffffff
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS964 [MuTIOL
Media IO] (rev 36)
Flags: bus master, medium devsel, latency 0
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev
01) (prog-if 80 [Master])
Subsystem: Elitegroup Computer Systems Unknown device 1b13
Flags: bus master, medium devsel, latency 128, IRQ 16
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at 4000 [size=16]
Capabilities: [58] Power Management version 2
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS]
AC'97 Sound Controller (rev a0)
Subsystem: Elitegroup Computer Systems Unknown device 1b13
Flags: bus master, medium devsel, latency 32, IRQ 21
I/O ports at e000 [size=256]
I/O ports at e400 [size=128]
Capabilities: [48] Power Management version 2
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems Unknown device 1b13
Flags: bus master, medium devsel, latency 32, IRQ 18
Memory at e1104000 (32-bit, non-prefetchable) [size=4K]
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems Unknown device 1b13
Flags: bus master, medium devsel, latency 32, IRQ 19
Memory at e1100000 (32-bit, non-prefetchable) [size=4K]
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems Unknown device 1b13
Flags: bus master, medium devsel, latency 32, IRQ 20
Memory at e1101000 (32-bit, non-prefetchable) [size=4K]
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0
Controller (prog-if 20 [EHCI])
Subsystem: Elitegroup Computer Systems Unknown device 1b13
Flags: bus master, medium devsel, latency 32, IRQ 17
Memory at e1102000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 2
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI
Fast Ethernet (rev 91)
Subsystem: Elitegroup Computer Systems Unknown device 1b13
Flags: bus master, medium devsel, latency 32, IRQ 22
I/O ports at e800 [size=256]
Memory at e1103000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 10000000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
661/741/760/761 PCI/AGP VGA Display Adapter (prog-if 00 [VGA])
Subsystem: Elitegroup Computer Systems Unknown device 1b13
Flags: 66MHz, medium devsel, IRQ 10
BIST result: 00
Memory at d8000000 (32-bit, prefetchable) [size=128M]
Memory at e1000000 (32-bit, non-prefetchable) [size=128K]
I/O ports at d000 [size=128]
Capabilities: [40] Power Management version 2
Capabilities: [50] AGP version 3.0
Please help!
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [gentoo-user] OT - GLSlideshow and nvidia (I think) (no it is sis) 2006-07-16 14:24 [gentoo-user] OT - GLSlideshow and nvidia (I think) Michael Sullivan @ 2006-07-16 14:43 ` Hemmann, Volker Armin 2006-07-16 15:36 ` Michael Sullivan 2006-07-16 17:57 ` [gentoo-user] OT - GLSlideshow and nvidia (I think) Richard Fish 2006-07-17 6:22 ` Schleimer, Ben 2 siblings, 1 reply; 10+ messages in thread From: Hemmann, Volker Armin @ 2006-07-16 14:43 UTC (permalink / raw To: gentoo-user On Sunday 16 July 2006 16:24, Michael Sullivan wrote: > Since the upgrade to modular X my wife has not been able to view her > favourite screesaver (our cats.) Whenever she runs the GLSlideshow > screensaver, she gets the following error: > > > Xlib extension GLX missing on display ":0.0" > > glslideshow display :0.0 does not support the GLX extension glxinfo /etc/X11/xorg.conf dmesg eselect opengl list is usually the minimum information needed. Because the vendor recalled the magic crystal balls some weeks ago. You don't have any nvidia stuff. You have sis integrated graphic. So you need sis support in the kernel. make menuconfig --->Device Drivers ---->Character Devices Turn on AGP for sis chipsets. Turn on dri support. Install x11-drivers/xf86-video-sis install x11-misc/sisctrl use google. Search for sis integrated graphics and xorg. There are lots of examples (can't help here, don't have sis integrated graphics. -- gentoo-user@gentoo.org mailing list ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-user] OT - GLSlideshow and nvidia (I think) (no it is sis) 2006-07-16 14:43 ` [gentoo-user] OT - GLSlideshow and nvidia (I think) (no it is sis) Hemmann, Volker Armin @ 2006-07-16 15:36 ` Michael Sullivan 2006-07-16 16:38 ` Hemmann, Volker Armin 0 siblings, 1 reply; 10+ messages in thread From: Michael Sullivan @ 2006-07-16 15:36 UTC (permalink / raw To: gentoo-user On Sun, 2006-07-16 at 16:43 +0200, Hemmann, Volker Armin wrote: > On Sunday 16 July 2006 16:24, Michael Sullivan wrote: > > Since the upgrade to modular X my wife has not been able to view her > > favourite screesaver (our cats.) Whenever she runs the GLSlideshow > > screensaver, she gets the following error: > > > > > > Xlib extension GLX missing on display ":0.0" > > > > glslideshow display :0.0 does not support the GLX extension > > glxinfo > /etc/X11/xorg.conf > dmesg > eselect opengl list > is usually the minimum information needed. Because the vendor recalled the > magic crystal balls some weeks ago. > > You don't have any nvidia stuff. > > You have sis integrated graphic. So you need sis support in the kernel. > > make menuconfig > > --->Device Drivers > > ---->Character Devices > > Turn on AGP for sis chipsets. Turn on dri support. Install > x11-drivers/xf86-video-sis > install > x11-misc/sisctrl > > use google. Search for sis integrated graphics and xorg. There are lots of > examples (can't help here, don't have sis integrated graphics. I searched google for "sis integrated graphics, xorg" and it pulled up a lot of information, but I don't know exactly what I'm looking for. I turned on /dev/agpgart for SIS and DRI in the kernel and rebooted with it. I installed xf86-video-sis and sisctrl. sisctrl didn't work the way I expected: catherine ~ # modprobe --list | grep 'sis' /lib/modules/2.6.16-gentoo-r13/kernel/drivers/scsi/sata_sis.ko /lib/modules/2.6.16-gentoo-r13/kernel/drivers/net/sis900.ko catherine ~ # modprobe sata_sis catherine ~ # modprobe sis900 catherine ~ # modprobe glx FATAL: Module glx not found. catherine ~ # modprobe --list | grep 'glx' catherine ~ # sisctrl SiS video adaptor not found This program is for SiS 300, 315 and 330 series only and requires the Xv (XVideo) extension. catherine ~ # Here's the other info: catherine ~ # glxinfo name of display: localhost:10.0 Xlib: extension "GLX" missing on display "localhost:10.0". Xlib: extension "GLX" missing on display "localhost:10.0". Xlib: extension "GLX" missing on display "localhost:10.0". Error: couldn't find RGB GLX visual visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat ---------------------------------------------------------------------- Xlib: extension "GLX" missing on display "localhost:10.0". Xlib: extension "GLX" missing on display "localhost:10.0". 0x21 16 tc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None Xlib: extension "GLX" missing on display "localhost:10.0". Xlib: extension "GLX" missing on display "localhost:10.0". 0x22 16 dc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None catherine ~ # cat /etc/X11/xorg.conf Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" FontPath "/usr/share/fonts/misc/" FontPath "/usr/share/fonts/TTF/" FontPath "/usr/share/fonts/Type1/" FontPath "/usr/share/fonts/CID/" FontPath "/usr/share/fonts/75dpi/" FontPath "/usr/share/fonts/100dpi/" EndSection Section "Module" Load "extmod" Load "dri" Load "dbe" Load "record" Load "xtrap" Load "glx" Load "type1" Load "freetype" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mouse0" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" #DisplaySize 280 210 # mm Identifier "Monitor0" VendorName "SNY" ModelName "650" Option "DPMS" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "SWcursor" # [<bool>] #Option "HWcursor" # [<bool>] #Option "NoAccel" # [<bool>] #Option "TurboQueue" # [<bool>] #Option "FastVram" # [<bool>] #Option "NoHostBus" # [<bool>] #Option "RenderAcceleration" # [<bool>] #Option "ForceCRT1Type" # <str> #Option "ForceCRT2Type" # <str> #Option "YPbPrAspectRatio" # <str> #Option "ShadowFB" # [<bool>] #Option "DRI" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "Rotate" # <str> #Option "NoXvideo" # [<bool>] #Option "Vesa" # [<bool>] #Option "MaxXFBMem" # <i> #Option "ForceCRT1" # [<bool>] #Option "XvOnCRT2" # [<bool>] #Option "PanelDelayCompensation" # <i> #Option "PanelDelayCompensation1" # <i> #Option "PDC" # <i> #Option "PDC1" # <i> #Option "EMI" # <i> #Option "LVDSHL" # <i> #Option "SpecialTiming" # <str> #Option "TVStandard" # <str> #Option "UseROMData" # [<bool>] #Option "NoInternalModes" # [<bool>] #Option "UseOEMData" # [<bool>] #Option "NoYV12" # [<bool>] #Option "CHTVType" # [<bool>] #Option "CHTVOverscan" # [<bool>] #Option "CHTVSuperOverscan" # [<bool>] #Option "CHTVLumaBandwidthCVBS" # <i> #Option "CHTVLumaBandwidthSVIDEO" # <i> #Option "CHTVLumaFlickerFilter" # <i> #Option "CHTVChromaBandwidth" # <i> #Option "CHTVChromaFlickerFilter" # <i> #Option "CHTVCVBSColor" # [<bool>] #Option "CHTVTextEnhance" # <i> #Option "CHTVContrast" # <i> #Option "SISTVEdgeEnhance" # <i> #Option "SISTVAntiFlicker" # <str> #Option "SISTVSaturation" # <i> #Option "SISTVCFilter" # [<bool>] #Option "SISTVYFilter" # <i> #Option "SISTVColorCalibFine" # <i> #Option "SISTVColorCalibCoarse" # <i> #Option "SISTVXScale" # <i> #Option "SISTVYScale" # <i> #Option "TVXPosOffset" # <i> #Option "TVYPosOffset" # <i> #Option "SIS6326TVAntiFlicker" # <str> #Option "SIS6326TVEnableYFilter" # [<bool>] #Option "SIS6326TVYFilterStrong" # [<bool>] #Option "SIS6326TVForcePlug" # <str> #Option "SIS6326FSCAdjust" # <i> #Option "UseColorHWCursor" # [<bool>] #Option "ColorHWCursorBlending" # [<bool>] #Option "ColorHWCursorBlendThreshold" # <i> #Option "RestoreBySetMode" # [<bool>] #Option "NoCRT2Detection" # [<bool>] #Option "ForceCRT2ReDetection" # [<bool>] #Option "SenseYPbPr" # [<bool>] #Option "CRT1Gamma" # [<bool>] #Option "CRT2Gamma" # [<bool>] #Option "StoredGammaBrightness" # <str> #Option "StoredGammaPreBrightness" # <str> #Option "XvGamma" # <str> #Option "XvDefaultContrast" # <i> #Option "XvDefaultBrightness" # <i> #Option "XvDefaultHue" # <i> #Option "XvDefaultSaturation" # <i> #Option "XvDefaultDisableGfx" # [<bool>] #Option "XvDefaultDisableGfxLR" # [<bool>] #Option "XvChromaMin" # <i> #Option "XvChromaMax" # <i> #Option "XvUseChromaKey" # [<bool>] #Option "XvInsideChromaKey" # [<bool>] #Option "XvYUVChromaKey" # [<bool>] #Option "XvDisableColorKey" # [<bool>] #Option "XvUseMemcpy" # [<bool>] #Option "XvDefaultAdaptor" # <str> #Option "ScaleLCD" # [<bool>] #Option "CenterLCD" # [<bool>] #Option "EnableHotkey" # [<bool>] #Option "EnableSiSCtrl" # [<bool>] #Option "OverruleFrequencyRanges" # [<bool>] #Option "MergedFB" # [<bool>] #Option "TwinView" # [<bool>] #Option "MergedFBAuto" # [<bool>] #Option "CRT2HSync" # <str> #Option "SecondMonitorHorizSync" # <str> #Option "CRT2VRefresh" # <str> #Option "SecondMonitorVertRefresh" # <str> #Option "CRT2Position" # <str> #Option "TwinViewOrientation" # <str> #Option "MetaModes" # <str> #Option "MergedDPI" # <str> #Option "NoMergedXinerama" # [<bool>] #Option "NoTwinviewXineramaInfo" # [<bool>] #Option "MergedXineramaCRT2IsScreen0" # [<bool>] Identifier "Card0" Driver "sis" VendorName "Silicon Integrated Systems [SiS]" BoardName "Unknown Board" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" "800x600" EndSubSection EndSection catherine ~ # catherine ~ # dmesg Linux version 2.6.16-gentoo-r13 (root@catherine) (gcc version 3.4.6 (Gentoo 3.4.6-r1, ssp-3.4.5-1.0, pie-8.7.9)) #1 SMP Sun Jul 16 10:05:57 CDT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000dff0000 (usable) BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS) BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 223MB LOWMEM available. found SMP MP-table at 000f57a0 On node 0 totalpages: 57328 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 53232 pages, LIFO batch:15 HighMem zone: 0 pages, LIFO batch:0 DMI 2.2 present. ACPI: RSDP (v000 AWARD ) @ 0x000f7170 ACPI: RSDT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0dff3000 ACPI: FADT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0dff3040 ACPI: MADT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0dff69c0 ACPI: DSDT (v001 AWARD AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:8 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 10000000 (gap: 0e000000:f0c00000) Built 1 zonelists Kernel command line: real_root=/dev/hdc6 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 1024 (order: 10, 16384 bytes) Detected 1662.773 MHz processor. Using tsc for high-res timesource Speakup v-2.00 CVS: Wed Dec 21 14:36:03 EST 2005 : initialized Console: colour VGA+ 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 221236k/229312k available (2360k kernel code, 7568k reserved, 572k data, 196k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3329.12 BogoMIPS (lpj=6658245) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000 00000000 00000000Checking 'hlt' instruction... OK. CPU0: AMD Sempron(tm) 2400+ stepping 01 Total of 1 processors activated (3329.12 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 1 CPUs migration_cost=0 checking if image is initramfs... it is Freeing initrd memory: 1893k freed NET: Registered protocol family 16 EISA bus registered ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb4e0, last bus=1 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5 Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0 PCI: Bridge: 0000:00:01.0 IO window: d000-dfff MEM window: e1000000-e10fffff PREFETCH window: d8000000-dfffffff squashfs: version 3.0 (2006/03/15) Phillip Lougher SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem Initializing Cryptographic API io scheduler noop registered io scheduler deadline registered (default) initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 ) Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected SiS 741 chipset agpgart: AGP aperture is 128M @ 0xd0000000 [drm] Initialized drm 1.0.1 20051102 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A mice: PS/2 mouse device common for all mice RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 0000:00:02.5 ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 16 SIS5513: chipset revision 1 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... input: AT Translated Set 2 keyboard as /class/input/input0 input: ImPS/2 Generic Wheel Mouse as /class/input/input1 hda: LITE-ON COMBO SOHC-5236V, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: WDC WD800BB-00JHC0, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: max request size: 128KiB hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33) hdc: cache flushes supported hdc: hdc1 hdc2 hdc3 < hdc5 hdc6 > hda: ATAPI 52X DVD-ROM CD-R/RW drive, 1536kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 CAPI Subsystem Rev 1.1.2.8 EISA: Probing bus 0 at eisa.0 Cannot allocate resource for EISA slot 1 Cannot allocate resource for EISA slot 4 EISA: Detected 0 cards. NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode Freeing unused kernel memory: 196k freed usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 17 ehci_hcd 0000:00:03.3: EHCI Host Controller PCI: cache line size of 64 is not supported by device 0000:00:03.3 ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:03.3: irq 17, io mem 0xe1102000 ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. USB Universal Host Controller Interface driver v2.3 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 18 ohci_hcd 0000:00:03.0: OHCI Host Controller ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:03.0: irq 18, io mem 0xe1104000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 19 ohci_hcd 0000:00:03.1: OHCI Host Controller ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:03.1: irq 19, io mem 0xe1100000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 20 ohci_hcd 0000:00:03.2: OHCI Host Controller ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:03.2: irq 20, io mem 0xe1101000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected sl811: driver sl811-hcd, 19 May 2005 ieee1394: Initialized config rom entry `ip1394' ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance libata version 1.20 loaded. device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com ReiserFS: hdc6: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hdc6 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Adding 497972k swap on /dev/hdc5. Priority:-1 extents:1 across:497972k EXT3 FS on hdc6, internal journal Real Time Clock Driver v1.12ac sis900.c: v1.08.09 Sep. 19 2005 ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 21 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. 0000:00:04.0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0xe800, IRQ 21, 00:11:5b:84:60:3b. FDC 0 is a post-1991 82077 parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] eth0: Media Link On 100mbps full-duplex Installing knfsd (copyright (C) 1996 okir@monad.swb.de). catherine ~ # catherine ~ # eselect opengl list Available OpenGL implementations: [1] xorg-x11 * catherine ~ # I apologize for the length of this email, but I really don't know what to do next to fix this problem. Thank you for your help. -- gentoo-user@gentoo.org mailing list ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-user] OT - GLSlideshow and nvidia (I think) (no it is sis) 2006-07-16 15:36 ` Michael Sullivan @ 2006-07-16 16:38 ` Hemmann, Volker Armin 2006-07-17 14:16 ` Michael Sullivan 0 siblings, 1 reply; 10+ messages in thread From: Hemmann, Volker Armin @ 2006-07-16 16:38 UTC (permalink / raw To: gentoo-user On Sunday 16 July 2006 17:36, Michael Sullivan wrote: > On Sun, 2006-07-16 at 16:43 +0200, Hemmann, Volker Armin wrote: > > On Sunday 16 July 2006 16:24, Michael Sullivan wrote: > > > Since the upgrade to modular X my wife has not been able to view her > > > favourite screesaver (our cats.) Whenever she runs the GLSlideshow > > > screensaver, she gets the following error: > > > > > > > > > Xlib extension GLX missing on display ":0.0" > > > > > > glslideshow display :0.0 does not support the GLX extension > > > > glxinfo > > /etc/X11/xorg.conf > > dmesg > > eselect opengl list > > is usually the minimum information needed. Because the vendor recalled > > the magic crystal balls some weeks ago. > > > > You don't have any nvidia stuff. > > > > You have sis integrated graphic. So you need sis support in the kernel. > > > > make menuconfig > > > > --->Device Drivers > > > > ---->Character Devices > > > > Turn on AGP for sis chipsets. Turn on dri support. Install > > x11-drivers/xf86-video-sis > > install > > x11-misc/sisctrl > > > > use google. Search for sis integrated graphics and xorg. There are lots > > of examples (can't help here, don't have sis integrated graphics. > > I searched google for "sis integrated graphics, xorg" and it pulled up a > lot of information, but I don't know exactly what I'm looking for. I > turned on /dev/agpgart for SIS and DRI in the kernel and rebooted with > it. I installed xf86-video-sis and sisctrl. sisctrl didn't work the > way I expected: > > catherine ~ # modprobe --list | grep 'sis' > /lib/modules/2.6.16-gentoo-r13/kernel/drivers/scsi/sata_sis.ko > /lib/modules/2.6.16-gentoo-r13/kernel/drivers/net/sis900.ko > catherine ~ # modprobe sata_sis > catherine ~ # modprobe sis900 > catherine ~ # modprobe glx you don't modprobe glx. It is a Xorg module, not a kernel module. > FATAL: Module glx not found. that is correct. > catherine ~ # modprobe --list | grep 'glx' this too ;) > catherine ~ # sisctrl > SiS video adaptor not found > This program is for SiS 300, 315 and 330 series only > and requires the Xv (XVideo) extension. do you have libXv installed? > > Identifier "Card0" > Driver "sis" > VendorName "Silicon Integrated Systems [SiS]" > BoardName "Unknown Board" > BusID "PCI:1:0:0" did you create that entry or a config app? do you have the dri-useflag set? maybe this helps you: http://www.winischhofer.eu/linuxsisvga.shtml (the 6XX chipsets and the 7XX chipsets are more or less identical. 6=intel, 7=amd) -- gentoo-user@gentoo.org mailing list ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-user] OT - GLSlideshow and nvidia (I think) (no it is sis) 2006-07-16 16:38 ` Hemmann, Volker Armin @ 2006-07-17 14:16 ` Michael Sullivan 0 siblings, 0 replies; 10+ messages in thread From: Michael Sullivan @ 2006-07-17 14:16 UTC (permalink / raw To: gentoo-user On Sun, 2006-07-16 at 18:38 +0200, Hemmann, Volker Armin wrote: > On Sunday 16 July 2006 17:36, Michael Sullivan wrote: > > On Sun, 2006-07-16 at 16:43 +0200, Hemmann, Volker Armin wrote: > > > On Sunday 16 July 2006 16:24, Michael Sullivan wrote: > > > > Since the upgrade to modular X my wife has not been able to view her > > > > favourite screesaver (our cats.) Whenever she runs the GLSlideshow > > > > screensaver, she gets the following error: > > > > > > > > > > > > Xlib extension GLX missing on display ":0.0" > > > > > > > > glslideshow display :0.0 does not support the GLX extension > > > > > > glxinfo > > > /etc/X11/xorg.conf > > > dmesg > > > eselect opengl list > > > is usually the minimum information needed. Because the vendor recalled > > > the magic crystal balls some weeks ago. > > > > > > You don't have any nvidia stuff. > > > > > > You have sis integrated graphic. So you need sis support in the kernel. > > > > > > make menuconfig > > > > > > --->Device Drivers > > > > > > ---->Character Devices > > > > > > Turn on AGP for sis chipsets. Turn on dri support. Install > > > x11-drivers/xf86-video-sis > > > install > > > x11-misc/sisctrl > > > > > > use google. Search for sis integrated graphics and xorg. There are lots > > > of examples (can't help here, don't have sis integrated graphics. > > > > I searched google for "sis integrated graphics, xorg" and it pulled up a > > lot of information, but I don't know exactly what I'm looking for. I > > turned on /dev/agpgart for SIS and DRI in the kernel and rebooted with > > it. I installed xf86-video-sis and sisctrl. sisctrl didn't work the > > way I expected: > > > > catherine ~ # modprobe --list | grep 'sis' > > /lib/modules/2.6.16-gentoo-r13/kernel/drivers/scsi/sata_sis.ko > > /lib/modules/2.6.16-gentoo-r13/kernel/drivers/net/sis900.ko > > catherine ~ # modprobe sata_sis > > catherine ~ # modprobe sis900 > > catherine ~ # modprobe glx > > you don't modprobe glx. It is a Xorg module, not a kernel module. > > > FATAL: Module glx not found. > > that is correct. > > > catherine ~ # modprobe --list | grep 'glx' > > this too ;) > > > catherine ~ # sisctrl > > SiS video adaptor not found > > This program is for SiS 300, 315 and 330 series only > > and requires the Xv (XVideo) extension. > > do you have libXv installed? > catherine ~ # emerge -pv libXv These are the packages that would be merged, in order: Calculating dependencies... done! [ebuild R ] x11-libs/libXv-1.0.1 USE="-debug" 0 kB Total size of downloads: 0 kB catherine ~ # > > > > > Identifier "Card0" > > Driver "sis" > > VendorName "Silicon Integrated Systems [SiS]" > > BoardName "Unknown Board" > > BusID "PCI:1:0:0" > > did you create that entry or a config app? Most of catherine's /etc/X11/xorg.conf was created by running X -configure when I first installed Gentoo (a long time ago) > do you have the dri-useflag set? > I didn't have the dri USE flag set, but I added it to /etc/make.conf and ran emerge -pvND world. None of the packages scheduled for rebuild used the dri use flag, but I rebuilt them anyway. > maybe this helps you: > http://www.winischhofer.eu/linuxsisvga.shtml > > (the 6XX chipsets and the 7XX chipsets are more or less identical. 6=intel, > 7=amd) -- gentoo-user@gentoo.org mailing list ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-user] OT - GLSlideshow and nvidia (I think) 2006-07-16 14:24 [gentoo-user] OT - GLSlideshow and nvidia (I think) Michael Sullivan 2006-07-16 14:43 ` [gentoo-user] OT - GLSlideshow and nvidia (I think) (no it is sis) Hemmann, Volker Armin @ 2006-07-16 17:57 ` Richard Fish 2006-07-16 18:08 ` Michael Sullivan 2006-07-17 6:22 ` Schleimer, Ben 2 siblings, 1 reply; 10+ messages in thread From: Richard Fish @ 2006-07-16 17:57 UTC (permalink / raw To: gentoo-user On 7/16/06, Michael Sullivan <michael@espersunited.com> wrote: > Since the upgrade to modular X my wife has not been able to view her > favourite screesaver (our cats.) Whenever she runs the GLSlideshow > screensaver, she gets the following error: > > > Xlib extension GLX missing on display ":0.0" > > glslideshow display :0.0 does not support the GLX extension Are you loading the glx module in your xorg.conf? Section "Module" ... Load "glx" -Richard -- gentoo-user@gentoo.org mailing list ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-user] OT - GLSlideshow and nvidia (I think) 2006-07-16 17:57 ` [gentoo-user] OT - GLSlideshow and nvidia (I think) Richard Fish @ 2006-07-16 18:08 ` Michael Sullivan 0 siblings, 0 replies; 10+ messages in thread From: Michael Sullivan @ 2006-07-16 18:08 UTC (permalink / raw To: gentoo-user On Sun, 2006-07-16 at 10:57 -0700, Richard Fish wrote: > On 7/16/06, Michael Sullivan <michael@espersunited.com> wrote: > > Since the upgrade to modular X my wife has not been able to view her > > favourite screesaver (our cats.) Whenever she runs the GLSlideshow > > screensaver, she gets the following error: > > > > > > Xlib extension GLX missing on display ":0.0" > > > > glslideshow display :0.0 does not support the GLX extension > > > Are you loading the glx module in your xorg.conf? > > Section "Module" > ... > Load "glx" > > -Richard Yes: Section "Module" Load "extmod" Load "dri" Load "dbe" Load "record" Load "xtrap" Load "glx" Load "type1" Load "freetype" EndSection -- gentoo-user@gentoo.org mailing list ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-user] OT - GLSlideshow and nvidia (I think) 2006-07-16 14:24 [gentoo-user] OT - GLSlideshow and nvidia (I think) Michael Sullivan 2006-07-16 14:43 ` [gentoo-user] OT - GLSlideshow and nvidia (I think) (no it is sis) Hemmann, Volker Armin 2006-07-16 17:57 ` [gentoo-user] OT - GLSlideshow and nvidia (I think) Richard Fish @ 2006-07-17 6:22 ` Schleimer, Ben 2006-07-17 14:21 ` Michael Sullivan 2 siblings, 1 reply; 10+ messages in thread From: Schleimer, Ben @ 2006-07-17 6:22 UTC (permalink / raw To: gentoo-user What does your /var/log/Xorg.0.log read? Does it actually load the glx extension or fail for some reason? Also, double check that you are using the opengl use-flag. I think it enables mesa since your video card doesn;t support גרן. Good luck Ben --- Michael Sullivan <michael@espersunited.com> wrote: > Since the upgrade to modular X my wife has not been > able to view her > favourite screesaver (our cats.) Whenever she runs > the GLSlideshow > screensaver, she gets the following error: > > > Xlib extension GLX missing on display ":0.0" > > glslideshow display :0.0 does not support the GLX > extension > > I googled for this error and everywhere I looked > people were fixing this > error by installing proper nvidia modules. My > problem is that I know > nothing about nvidia or even device drivers in > general. Do I need to > compile nvidia drivers into her kernel? If so, > which ones? Here's the > lspci output from her computer: > > catherine X11 # lspci -v > 00:00.0 Host bridge: Silicon Integrated Systems > [SiS] 741/741GX/M741 > Host (rev 03) > Subsystem: Elitegroup Computer Systems > Unknown device 1b13 > Flags: bus master, medium devsel, latency 32 > Memory at d0000000 (32-bit, > non-prefetchable) [size=128M] > Capabilities: [c0] AGP version 3.5 > > 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] > SiS AGP Port > (virtual PCI-to-PCI bridge) (prog-if 00 [Normal > decode]) > Flags: bus master, 66MHz, fast devsel, > latency 99 > Bus: primary=00, secondary=01, > subordinate=01, sec-latency=32 > I/O behind bridge: 0000d000-0000dfff > Memory behind bridge: e1000000-e10fffff > Prefetchable memory behind bridge: > d8000000-dfffffff > > 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] > SiS964 [MuTIOL > Media IO] (rev 36) > Flags: bus master, medium devsel, latency 0 > > 00:02.5 IDE interface: Silicon Integrated Systems > [SiS] 5513 [IDE] (rev > 01) (prog-if 80 [Master]) > Subsystem: Elitegroup Computer Systems > Unknown device 1b13 > Flags: bus master, medium devsel, latency > 128, IRQ 16 > I/O ports at <unassigned> > I/O ports at <unassigned> > I/O ports at <unassigned> > I/O ports at <unassigned> > I/O ports at 4000 [size=16] > Capabilities: [58] Power Management version > 2 > > 00:02.7 Multimedia audio controller: Silicon > Integrated Systems [SiS] > AC'97 Sound Controller (rev a0) > Subsystem: Elitegroup Computer Systems > Unknown device 1b13 > Flags: bus master, medium devsel, latency > 32, IRQ 21 > I/O ports at e000 [size=256] > I/O ports at e400 [size=128] > Capabilities: [48] Power Management version > 2 > > 00:03.0 USB Controller: Silicon Integrated Systems > [SiS] USB 1.0 > Controller (rev 0f) (prog-if 10 [OHCI]) > Subsystem: Elitegroup Computer Systems > Unknown device 1b13 > Flags: bus master, medium devsel, latency > 32, IRQ 18 > Memory at e1104000 (32-bit, > non-prefetchable) [size=4K] > > 00:03.1 USB Controller: Silicon Integrated Systems > [SiS] USB 1.0 > Controller (rev 0f) (prog-if 10 [OHCI]) > Subsystem: Elitegroup Computer Systems > Unknown device 1b13 > Flags: bus master, medium devsel, latency > 32, IRQ 19 > Memory at e1100000 (32-bit, > non-prefetchable) [size=4K] > > 00:03.2 USB Controller: Silicon Integrated Systems > [SiS] USB 1.0 > Controller (rev 0f) (prog-if 10 [OHCI]) > Subsystem: Elitegroup Computer Systems > Unknown device 1b13 > Flags: bus master, medium devsel, latency > 32, IRQ 20 > Memory at e1101000 (32-bit, > non-prefetchable) [size=4K] > > 00:03.3 USB Controller: Silicon Integrated Systems > [SiS] USB 2.0 > Controller (prog-if 20 [EHCI]) > Subsystem: Elitegroup Computer Systems > Unknown device 1b13 > Flags: bus master, medium devsel, latency > 32, IRQ 17 > Memory at e1102000 (32-bit, > non-prefetchable) [size=4K] > Capabilities: [50] Power Management version > 2 > > 00:04.0 Ethernet controller: Silicon Integrated > Systems [SiS] SiS900 PCI > Fast Ethernet (rev 91) > Subsystem: Elitegroup Computer Systems > Unknown device 1b13 > Flags: bus master, medium devsel, latency > 32, IRQ 22 > I/O ports at e800 [size=256] > Memory at e1103000 (32-bit, > non-prefetchable) [size=4K] > [virtual] Expansion ROM at 10000000 > [disabled] [size=128K] > Capabilities: [40] Power Management version > 2 > > 01:00.0 VGA compatible controller: Silicon > Integrated Systems [SiS] > 661/741/760/761 PCI/AGP VGA Display Adapter (prog-if > 00 [VGA]) > Subsystem: Elitegroup Computer Systems > Unknown device 1b13 > Flags: 66MHz, medium devsel, IRQ 10 > BIST result: 00 > Memory at d8000000 (32-bit, prefetchable) > [size=128M] > Memory at e1000000 (32-bit, > non-prefetchable) [size=128K] > I/O ports at d000 [size=128] > Capabilities: [40] Power Management version > 2 > Capabilities: [50] AGP version 3.0 > > Please help! > > > > -- > gentoo-user@gentoo.org mailing list > > "He who writes the code gets to choose his license, and nobody else gets to complain" - Linus Torvale In my honest opinion, it should read - "He who writes the code gets to choose his license, and everybody else complains." -- gentoo-user@gentoo.org mailing list ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-user] OT - GLSlideshow and nvidia (I think) 2006-07-17 6:22 ` Schleimer, Ben @ 2006-07-17 14:21 ` Michael Sullivan 2006-07-17 19:48 ` Calvin Walton 0 siblings, 1 reply; 10+ messages in thread From: Michael Sullivan @ 2006-07-17 14:21 UTC (permalink / raw To: gentoo-user On Sun, 2006-07-16 at 23:22 -0700, Schleimer, Ben wrote: > What does your /var/log/Xorg.0.log read? > Does it actually load the glx extension or fail for > some reason? > Here's my /var/log/Xorg.0.log: X Window System Version 7.0.0 Release Date: 21 December 2005 X Protocol Version 11, Revision 0, Release 7.0 Build Operating System:Linux 2.6.16-gentoo-r9 i686 Current Operating System: Linux catherine 2.6.16-gentoo-r13 #1 SMP Sun Jul 16 10:05:57 CDT 2006 i686 Build Date: 01 July 2006 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 17 09:18:42 2006 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "X.org Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (WW) The directory "/usr/share/fonts/CID/" does not exist. Entry deleted from font path. (**) FontPath set to "/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/share/fonts/75dpi/,/usr/share/fonts/100dpi/" (==) RgbPath set to "/usr/share/X11/rgb" (==) ModulePath set to "/usr/lib/xorg/modules" (II) Module ABI versions: X.Org ANSI C Emulation: 0.2 X.Org Video Driver: 0.8 X.Org XInput driver : 0.5 X.Org Server Extension : 0.2 X.Org Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so (II) Module bitmap: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/lib/xorg/modules/libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.8 (++) using VT number 8 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1039,0741 card 1019,1b13 rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1039,0003 card 0000,0000 rev 00 class 06,04,00 hdr 01 (II) PCI: 00:02:0: chip 1039,0964 card 0000,0000 rev 36 class 06,01,00 hdr 80 (II) PCI: 00:02:5: chip 1039,5513 card 1019,1b13 rev 01 class 01,01,80 hdr 00 (II) PCI: 00:02:7: chip 1039,7012 card 1019,1b13 rev a0 class 04,01,00 hdr 00 (II) PCI: 00:03:0: chip 1039,7001 card 1019,1b13 rev 0f class 0c,03,10 hdr 80 (II) PCI: 00:03:1: chip 1039,7001 card 1019,1b13 rev 0f class 0c,03,10 hdr 00 (II) PCI: 00:03:2: chip 1039,7001 card 1019,1b13 rev 0f class 0c,03,10 hdr 00 (II) PCI: 00:03:3: chip 1039,7002 card 1019,1b13 rev 00 class 0c,03,20 hdr 00 (II) PCI: 00:04:0: chip 1039,0900 card 1019,1b13 rev 91 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip 1039,6330 card 1019,1b13 rev 00 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B] [1] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B] [2] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [3] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xe1000000 - 0xe10fffff (0x100000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:2:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:0:0) Silicon Integrated Systems [SiS] 661/741/760/761 PCI/AGP VGA Display Adapter rev 0, Mem @ 0xd8000000/27, 0xe1000000/17, I/O @ 0xd000/7 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xd0000000 from 0xd7ffffff to 0xcfffffff (II) Active PCI resource ranges: [0] -1 0 0xe1103000 - 0xe1103fff (0x1000) MX[B] [1] -1 0 0xe1102000 - 0xe1102fff (0x1000) MX[B] [2] -1 0 0xe1101000 - 0xe1101fff (0x1000) MX[B] [3] -1 0 0xe1100000 - 0xe1100fff (0x1000) MX[B] [4] -1 0 0xe1104000 - 0xe1104fff (0x1000) MX[B] [5] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [6] -1 0 0xe1000000 - 0xe101ffff (0x20000) MX[B](B) [7] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B) [8] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [9] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[B] [10] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [11] -1 0 0x00004000 - 0x0000400f (0x10) IX[B] [12] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xe1103000 - 0xe1103fff (0x1000) MX[B] [1] -1 0 0xe1102000 - 0xe1102fff (0x1000) MX[B] [2] -1 0 0xe1101000 - 0xe1101fff (0x1000) MX[B] [3] -1 0 0xe1100000 - 0xe1100fff (0x1000) MX[B] [4] -1 0 0xe1104000 - 0xe1104fff (0x1000) MX[B] [5] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [6] -1 0 0xe1000000 - 0xe101ffff (0x20000) MX[B](B) [7] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B) [8] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [9] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[B] [10] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [11] -1 0 0x00004000 - 0x0000400f (0x10) IX[B] [12] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xe1103000 - 0xe1103fff (0x1000) MX[B] [6] -1 0 0xe1102000 - 0xe1102fff (0x1000) MX[B] [7] -1 0 0xe1101000 - 0xe1101fff (0x1000) MX[B] [8] -1 0 0xe1100000 - 0xe1100fff (0x1000) MX[B] [9] -1 0 0xe1104000 - 0xe1104fff (0x1000) MX[B] [10] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [11] -1 0 0xe1000000 - 0xe101ffff (0x20000) MX[B](B) [12] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B) [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [16] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[B] [17] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [18] -1 0 0x00004000 - 0x0000400f (0x10) IX[B] [19] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B](B) (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/lib/xorg/modules/linux/libdrm.so (II) Module drm: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading extension XFree86-DRI (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension RECORD (II) LoadModule: "xtrap" (II) Loading /usr/lib/xorg/modules/extensions/libxtrap.so (II) Module xtrap: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension DEC-XTRAP (II) LoadModule: "glx" (WW) Warning, couldn't open module glx (II) UnloadModule: "glx" (EE) Failed to load module "glx" (module does not exist, 0) (II) LoadModule: "type1" (II) Loading /usr/lib/xorg/modules/fonts/libtype1.so (II) Module type1: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Type1 (II) LoadModule: "freetype" (II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 7.0.0, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font FreeType (II) LoadModule: "sis" (II) Loading /usr/lib/xorg/modules/drivers/sis_drv.so (II) Module sis: vendor="X.Org Foundation" compiled for 7.0.0, module version = 0.8.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 0.8 (II) LoadModule: "mouse" (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.4 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.5 (II) LoadModule: "kbd" (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.5 (II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620, SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H, SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre), SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX], SIS340 (II) SIS: driver for XGI chipsets: Volari Z7 (XG20), Volari V3XT/V5/V8/Duo (XG40) (II) Primary Device is: PCI 01:00:0 (--) Chipset SIS660/[M]661[F| M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX] found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xe1103000 - 0xe1103fff (0x1000) MX[B] [6] -1 0 0xe1102000 - 0xe1102fff (0x1000) MX[B] [7] -1 0 0xe1101000 - 0xe1101fff (0x1000) MX[B] [8] -1 0 0xe1100000 - 0xe1100fff (0x1000) MX[B] [9] -1 0 0xe1104000 - 0xe1104fff (0x1000) MX[B] [10] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [11] -1 0 0xe1000000 - 0xe101ffff (0x20000) MX[B](B) [12] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B) [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [16] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[B] [17] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [18] -1 0 0x00004000 - 0x0000400f (0x10) IX[B] [19] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B](B) (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xe1103000 - 0xe1103fff (0x1000) MX[B] [6] -1 0 0xe1102000 - 0xe1102fff (0x1000) MX[B] [7] -1 0 0xe1101000 - 0xe1101fff (0x1000) MX[B] [8] -1 0 0xe1100000 - 0xe1100fff (0x1000) MX[B] [9] -1 0 0xe1104000 - 0xe1104fff (0x1000) MX[B] [10] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [11] -1 0 0xe1000000 - 0xe101ffff (0x20000) MX[B](B) [12] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B) [13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [18] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [19] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[B] [20] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [21] -1 0 0x00004000 - 0x0000400f (0x10) IX[B] [22] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B](B) [23] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [24] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) SIS(0): SiS driver (2005/09/20-1, compiled for X.org 7.0.0.0) (II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer <thomas@winischhofer.net> and others (II) SIS(0): *** See http://www.winischhofer.at/linuxsisvga.shtml (II) SIS(0): *** for documentation and updates. (--) SIS(0): sisfb not found (--) SIS(0): Relocated I/O registers at 0xD000 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/lib/xorg/modules/libramdac.so (II) Module ramdac: vendor="X.Org Foundation" compiled for 7.0.0, module version = 0.1.0 ABI class: X.Org Video Driver, version 0.8 (**) SIS(0): Depth 24, (--) framebuffer bpp 32 (==) SIS(0): RGB weight 888 (==) SIS(0): Default visual is TrueColor (--) SIS(0): Video BIOS version "0.98.00 " found (new SiS data layout) (**) SIS(0): Option "DRI" "true" (==) SIS(0): Using XAA acceleration architecture (==) SIS(0): Using HW cursor (==) SIS(0): Color HW cursor is enabled (II) SIS(0): Using VRAM command queue, size 512k (==) SIS(0): Hotkey display switching is enabled (II) SIS(0): WARNING: Using the Hotkey might freeze your machine, regardless (II) SIS(0): whether enabled or disabled. This is no driver bug. (==) SIS(0): SiSCtrl utility interface is disabled (II) SIS(0): For information on SiSCtrl, see http://www.winischhofer.at/linuxsispart1.shtml#sisctrl (**) SIS(0): DRI enabled (--) SIS(0): DIMM0 is DDR SDRAM (--) SIS(0): DIMM1 is not installed (--) SIS(0): DIMM2 is not installed (--) SIS(0): DIMM3 is not installed (--) SIS(0): DRAM type: DDR SDRAM (--) SIS(0): Memory clock: 332.892 MHz (--) SIS(0): DRAM bus width: 64 bit (--) SIS(0): Linear framebuffer at 0xD8000000 (--) SIS(0): MMIO registers at 0xE1000000 (size 64K) (--) SIS(0): VideoRAM: 32768 KB (II) SIS(0): Using 16384K of framebuffer memory at offset 0K (--) SIS(0): Hardware supports two video overlays (==) SIS(0): Using gamma correction (1.0, 1.0, 1.0) (II) SIS(0): Gamma correction is enabled (II) SIS(0): Separate Xv gamma correction is disabled (--) SIS(0): Memory bandwidth at 32 bpp is 665.784 MHz (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/lib/xorg/modules/libddc.so (II) Module ddc: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.8 (--) SIS(0): CRT1 DDC probing failed (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Reloading /usr/lib/xorg/modules/libddc.so (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules/libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.1.0 ABI class: X.Org Video Driver, version 0.8 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/lib/xorg/modules/libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.8 (II) SIS(0): initializing int10 (II) SIS(0): Primary V_BIOS segment is: 0xc000 (II) SIS(0): VESA BIOS detected (II) SIS(0): VESA VBE Version 3.0 (II) SIS(0): VESA VBE Total Mem: 16384 kB (II) SIS(0): VESA VBE OEM: SiS (II) SIS(0): VESA VBE OEM Software Rev: 1.0 (II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp. (II) SIS(0): VESA VBE OEM Product: 6330 (II) SIS(0): VESA VBE OEM Product Rev: 0.98.00 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Reloading /usr/lib/xorg/modules/libddc.so (II) SIS(0): VESA VBE DDC supported (II) SIS(0): VESA VBE DDC Level 2 (II) SIS(0): VESA VBE DDC transfer in appr. 1 sec. (II) SIS(0): VESA VBE DDC read successfully (--) SIS(0): VBE CRT1 DDC monitor info: (II) SIS(0): Manufacturer: SNY Model: 650 Serial#: 7120864 (II) SIS(0): Year: 1997 Week: 42 (II) SIS(0): EDID Version: 1.0 (II) SIS(0): Analog Display Input, Input Voltage Level: 0.714/0.286 V (II) SIS(0): Sync: Separate Composite SyncOnGreen (II) SIS(0): Max H-Image Size [cm]: horiz.: 28 vert.: 21 (II) SIS(0): Gamma: 2.50 (II) SIS(0): DPMS capabilities: Suspend Off; RGB/Color Display (II) SIS(0): redX: 0.625 redY: 0.340 greenX: 0.280 greenY: 0.595 (II) SIS(0): blueX: 0.155 blueY: 0.070 whiteX: 0.283 whiteY: 0.298 (II) SIS(0): Supported VESA Video Modes: (II) SIS(0): 720x400@70Hz (II) SIS(0): 720x400@88Hz (II) SIS(0): 640x480@60Hz (II) SIS(0): 640x480@67Hz (II) SIS(0): 640x480@72Hz (II) SIS(0): 640x480@75Hz (II) SIS(0): 800x600@56Hz (II) SIS(0): 800x600@60Hz (II) SIS(0): 800x600@72Hz (II) SIS(0): 800x600@75Hz (II) SIS(0): 832x624@75Hz (II) SIS(0): 1024x768@87Hz (interlaced) (II) SIS(0): 1024x768@60Hz (II) SIS(0): 1024x768@70Hz (II) SIS(0): 1024x768@75Hz (II) SIS(0): Manufacturer's mask: 0 (II) SIS(0): Supported Future Video Modes: (II) SIS(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833 (II) SIS(0): #1: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) SIS(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) SIS(0): Supported additional Video Mode: (II) SIS(0): clock: 25.2 MHz Image Size: 270 x 202 mm (II) SIS(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0 (II) SIS(0): v_active: 400 v_sync: 412 v_sync_end 414 v_blanking: 449 v_border: 0 (II) SIS(0): Supported additional Video Mode: (II) SIS(0): clock: 80.0 MHz Image Size: 270 x 202 mm (II) SIS(0): h_active: 1152 h_sync: 1216 h_sync_end 1328 h_blank_end 1456 h_border: 0 (II) SIS(0): v_active: 864 v_sync: 870 v_sync_end 875 v_blanking: 916 v_border: 0 (II) SIS(0): Supported additional Video Mode: (II) SIS(0): clock: 65.0 MHz Image Size: 270 x 202 mm (II) SIS(0): h_active: 1152 h_sync: 1240 h_sync_end 1368 h_blank_end 1448 h_border: 0 (II) SIS(0): v_active: 432 v_sync: 447 v_sync_end 451 v_blanking: 473 v_border: 0 (II) SIS(0): Supported additional Video Mode: (II) SIS(0): clock: 25.2 MHz Image Size: 270 x 202 mm (II) SIS(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0 (II) SIS(0): v_active: 480 v_sync: 490 v_sync_end 492 v_blanking: 525 v_border: 0 (--) SIS(0): According to DDC size, CRT1 aspect ratio is 1.33:1 (normal) (--) SIS(0): End of VBE CRT1 DDC monitor info (==) SIS(0): Min pixel clock is 10 MHz (--) SIS(0): Max pixel clock is 400 MHz (II) SIS(0): Replaced entire mode list with built-in modes (II) SIS(0): Using fake widescreen modes for CRT1 VGA devices (II) SIS(0): Use option "ForceCRT1VGAAspect" to overrule (II) SIS(0): Substituting missing CRT1 monitor HSync range by DDC data (II) SIS(0): Substituting missing CRT1 monitor VRefresh range by DDC data (II) SIS(0): "Unknown reason" in the following list means that the mode (II) SIS(0): is not supported on the chipset/bridge/current output device. (II) SIS(0): Monitor0: Using hsync range of 31.50-68.54 kHz (II) SIS(0): Monitor0: Using vrefresh range of 56.00-85.00 Hz (II) SIS(0): Clock range: 10.00 to 400.00 MHz (II) SIS(0): Not using default mode "800x600" (vrefresh out of range) (II) SIS(0): Not using default mode "800x600" (hsync out of range) (II) SIS(0): Not using default mode "800x600" (hsync out of range) (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) (II) SIS(0): Not using default mode "640x480" (hsync out of range) (II) SIS(0): Not using default mode "640x480" (hsync out of range) (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range) (II) SIS(0): Not using default mode "1024x768" (hsync out of range) (II) SIS(0): Not using default mode "1024x768" (hsync out of range) (II) SIS(0): Not using default mode "1280x1024" (vrefresh out of range) (II) SIS(0): Not using default mode "1280x1024" (hsync out of range) (II) SIS(0): Not using default mode "1280x1024" (hsync out of range) (II) SIS(0): Not using default mode "1600x1200" (hsync out of range) (II) SIS(0): Not using default mode "1600x1200" (hsync out of range) (II) SIS(0): Not using default mode "1600x1200" (hsync out of range) (II) SIS(0): Not using default mode "1600x1200" (hsync out of range) (II) SIS(0): Not using default mode "1600x1200" (hsync out of range) (II) SIS(0): Not using default mode "1600x1200" (hsync out of range) (II) SIS(0): Not using default mode "1600x1200" (hsync out of range) (II) SIS(0): Not using default mode "1920x1440" (hsync out of range) (II) SIS(0): Not using default mode "1920x1440" (hsync out of range) (II) SIS(0): Not using default mode "1920x1440" (hsync out of range) (II) SIS(0): Not using default mode "1920x1440" (hsync out of range) (II) SIS(0): Not using default mode "1920x1440" (hsync out of range) (II) SIS(0): Not using default mode "1920x1440" (hsync out of range) (II) SIS(0): Not using default mode "2048x1536" (hsync out of range) (II) SIS(0): Not using default mode "2048x1536" (hsync out of range) (II) SIS(0): Not using default mode "2048x1536" (hsync out of range) (II) SIS(0): Not using default mode "2048x1536" (hsync out of range) (II) SIS(0): Not using default mode "2048x1536" (hsync out of range) (II) SIS(0): Not using default mode "1024x576" (hsync out of range) (II) SIS(0): Not using default mode "1280x720" (hsync out of range) (II) SIS(0): Not using default mode "1280x720" (hsync out of range) (II) SIS(0): Not using default mode "1280x960" (hsync out of range) (II) SIS(0): Not using default mode "1280x768" (hsync out of range) (II) SIS(0): Not using default mode "1280x768" (hsync out of range) (II) SIS(0): Not using default mode "1400x1050" (hsync out of range) (II) SIS(0): Not using default mode "1152x864" (hsync out of range) (II) SIS(0): Not using default mode "848x480" (hsync out of range) (II) SIS(0): Not using default mode "848x480" (hsync out of range) (II) SIS(0): Not using default mode "856x480" (hsync out of range) (II) SIS(0): Not using default mode "1280x800" (hsync out of range) (II) SIS(0): Not using default mode "1280x800" (hsync out of range) (II) SIS(0): Not using default mode "1280x854" (hsync out of range) (II) SIS(0): Not using default mode "1280x854" (hsync out of range) (II) SIS(0): Not using default mode "1680x1050" (width too large for virtual size) (II) SIS(0): Not using default mode "1400x1050" (width too large for virtual size) (II) SIS(0): Not using default mode "1280x1024" (width too large for virtual size) (II) SIS(0): Not using default mode "1280x960" (width too large for virtual size) (II) SIS(0): Not using default mode "1280x854" (width too large for virtual size) (II) SIS(0): Not using default mode "1360x768" (width too large for virtual size) (II) SIS(0): Not using default mode "1280x800" (width too large for virtual size) (II) SIS(0): Not using default mode "1152x864" (width too large for virtual size) (II) SIS(0): Not using default mode "1152x864" (width too large for virtual size) (II) SIS(0): Not using default mode "1280x768" (width too large for virtual size) (II) SIS(0): Not using default mode "1280x720" (width too large for virtual size) (--) SIS(0): Virtual size is 1024x768 (pitch 1024) (**) SIS(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz (II) SIS(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (**) SIS(0): *Default mode "800x600": 56.2 MHz, 53.7 kHz, 85.1 Hz (II) SIS(0): Modeline "800x600" 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (**) SIS(0): Default mode "1024x768": 78.7 MHz, 60.0 kHz, 75.0 Hz (II) SIS(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (**) SIS(0): Default mode "1024x768": 75.2 MHz, 56.6 kHz, 70.2 Hz (II) SIS(0): Modeline "1024x768" 75.17 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (**) SIS(0): Default mode "1024x768": 65.1 MHz, 48.5 kHz, 60.1 Hz (II) SIS(0): Modeline "1024x768" 65.15 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (**) SIS(0): Default mode "1024x576": 78.7 MHz, 60.0 kHz, 75.0 Hz (II) SIS(0): Modeline "1024x576" 78.75 1024 1040 1136 1312 576 686 690 800 +hsync +vsync (**) SIS(0): Default mode "1024x576": 65.1 MHz, 48.5 kHz, 60.1 Hz (II) SIS(0): Modeline "1024x576" 65.15 1024 1048 1184 1344 576 688 694 806 +hsync +vsync (**) SIS(0): Default mode "960x600": 41.5 MHz, 37.1 kHz, 60.0 Hz (II) SIS(0): Modeline "960x600" 41.50 960 1008 1088 1120 600 603 609 618 +hsync +vsync (**) SIS(0): Default mode "960x540": 37.3 MHz, 33.8 kHz, 60.0 Hz (II) SIS(0): Modeline "960x540" 37.29 960 976 1008 1104 540 543 549 563 +hsync +vsync (**) SIS(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz (II) SIS(0): Modeline "800x600" 49.52 800 816 896 1056 600 601 604 625 +hsync +vsync (**) SIS(0): Default mode "800x600": 50.1 MHz, 48.2 kHz, 72.4 Hz (II) SIS(0): Modeline "800x600" 50.11 800 856 976 1040 600 637 643 666 +hsync +vsync (**) SIS(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) SIS(0): Modeline "800x600" 39.97 800 840 968 1056 600 601 605 628 +hsync +vsync (**) SIS(0): Default mode "800x600": 36.1 MHz, 35.2 kHz, 56.3 Hz (II) SIS(0): Modeline "800x600" 36.06 800 824 896 1024 600 601 603 625 +hsync +vsync (**) SIS(0): Default mode "768x576": 35.0 MHz, 35.9 kHz, 60.1 Hz (II) SIS(0): Modeline "768x576" 35.00 768 792 872 976 576 578 581 597 +hsync +vsync (**) SIS(0): Default mode "720x576": 32.7 MHz, 35.9 kHz, 60.1 Hz (II) SIS(0): Modeline "720x576" 32.73 720 744 816 912 576 578 581 597 +hsync +vsync (**) SIS(0): Default mode "856x480": 33.9 MHz, 31.7 kHz, 59.8 Hz (II) SIS(0): Modeline "856x480" 33.94 856 872 1000 1072 480 492 495 529 -hsync -vsync (**) SIS(0): Default mode "800x480": 56.2 MHz, 53.7 kHz, 85.2 Hz (II) SIS(0): Modeline "800x480" 56.25 800 832 896 1048 480 554 557 630 +hsync +vsync (**) SIS(0): Default mode "800x480": 49.5 MHz, 46.9 kHz, 75.1 Hz (II) SIS(0): Modeline "800x480" 49.52 800 816 896 1056 480 551 554 624 +hsync +vsync (**) SIS(0): Default mode "800x480": 39.8 MHz, 37.7 kHz, 60.0 Hz (II) SIS(0): Modeline "800x480" 39.77 800 840 968 1056 480 552 556 628 +hsync +vsync (**) SIS(0): Default mode "720x480": 28.3 MHz, 31.6 kHz, 61.0 Hz (II) SIS(0): Modeline "720x480" 28.28 720 728 840 896 480 490 492 517 -hsync -vsync (**) SIS(0): Default mode "640x480": 36.1 MHz, 43.3 kHz, 85.1 Hz (II) SIS(0): Modeline "640x480" 36.06 640 696 752 832 480 481 484 509 -hsync -vsync (**) SIS(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz (II) SIS(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (**) SIS(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz (II) SIS(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (**) SIS(0): Default mode "640x480": 25.1 MHz, 31.3 kHz, 59.7 Hz (II) SIS(0): Modeline "640x480" 25.06 640 656 752 800 480 490 492 525 -hsync -vsync (**) SIS(0): Default mode "640x400": 25.1 MHz, 31.6 kHz, 71.6 Hz (II) SIS(0): Modeline "640x400" 25.06 640 656 752 792 400 413 415 442 -hsync +vsync (**) SIS(0): Default mode "512x384": 32.6 MHz, 48.5 kHz, 60.1 Hz (D) (II) SIS(0): Modeline "512x384" 32.57 512 528 592 672 384 385 388 403 doublescan -hsync -vsync (**) SIS(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D) (II) SIS(0): Modeline "400x300" 19.98 400 416 480 528 300 300 302 314 doublescan +hsync +vsync (**) SIS(0): Default mode "320x240": 12.5 MHz, 31.3 kHz, 60.7 Hz (D) (II) SIS(0): Modeline "320x240" 12.53 320 328 376 400 240 245 246 258 doublescan -hsync -vsync (**) SIS(0): Default mode "320x200": 12.5 MHz, 31.3 kHz, 70.9 Hz (D) (II) SIS(0): Modeline "320x200" 12.53 320 328 376 400 200 206 207 221 doublescan -hsync +vsync (--) SIS(0): Display dimensions: (280, 210) mm (--) SIS(0): DPI set to (92, 92) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.2 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib/xorg/modules/libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.2.0 ABI class: X.Org Video Driver, version 0.8 (II) SIS(0): 2D acceleration enabled (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xe1000000 - 0xe101ffff (0x20000) MX[B] [1] 0 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B] [2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [7] -1 0 0xe1103000 - 0xe1103fff (0x1000) MX[B] [8] -1 0 0xe1102000 - 0xe1102fff (0x1000) MX[B] [9] -1 0 0xe1101000 - 0xe1101fff (0x1000) MX[B] [10] -1 0 0xe1100000 - 0xe1100fff (0x1000) MX[B] [11] -1 0 0xe1104000 - 0xe1104fff (0x1000) MX[B] [12] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [13] -1 0 0xe1000000 - 0xe101ffff (0x20000) MX[B](B) [14] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B) [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU) [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU) [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU) [18] 0 0 0x0000d000 - 0x0000d07f (0x80) IX[B] [19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [21] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [22] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[B] [23] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [24] -1 0 0x00004000 - 0x0000400f (0x10) IX[B] [25] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B](B) [26] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [27] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Reloading /usr/lib/xorg/modules/libvbe.so (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/lib/xorg/modules/libint10.so (II) SIS(0): initializing int10 (II) SIS(0): Primary V_BIOS segment is: 0xc000 (II) SIS(0): VESA BIOS detected (II) SIS(0): VESA VBE Version 3.0 (II) SIS(0): VESA VBE Total Mem: 16384 kB (II) SIS(0): VESA VBE OEM: SiS (II) SIS(0): VESA VBE OEM Software Rev: 1.0 (II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp. (II) SIS(0): VESA VBE OEM Product: 6330 (II) SIS(0): VESA VBE OEM Product Rev: 0.98.00 (II) SIS(0): Setting standard mode 0x64 (NI) SIS(0): DRI not supported on this chipset (II) SIS(0): RENDER acceleration enabled (II) SIS(0): Framebuffer from (0,0) to (1023,4094) (II) SIS(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles 8x8 color pattern filled rectangles Solid Lines Dashed Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 18 256x256 slots 6 512x512 slots 32 8x8 color pattern slots (--) SIS(0): CPU frequency 1662.77Mhz (II) SIS(0): Benchmarking system RAM to video RAM memory transfer methods: (--) SIS(0): Checked libc memcpy()... 70.2 MiB/s (--) SIS(0): Checked built-in-1 memcpy()... 70.3 MiB/s (--) SIS(0): Checked built-in-2 memcpy()... 40.1 MiB/s (--) SIS(0): Checked MMX memcpy()... 140.3 MiB/s (--) SIS(0): Checked SSE memcpy()... 140.4 MiB/s (--) SIS(0): Checked 3DNow! memcpy()... 140.5 MiB/s (--) SIS(0): Checked MMX2 memcpy()... 140.5 MiB/s (--) SIS(0): Using MMX2 method for aligned data transfers to video RAM (--) SIS(0): Using MMX2 method for unaligned data transfers to video RAM (==) SIS(0): Backing store disabled (==) SIS(0): Silken mouse enabled (**) Option "dpms" (**) SIS(0): DPMS enabled (II) SIS(0): Using SiS300/315/330/340 series HW Xv (II) SIS(0): Default Xv adaptor is Video Overlay (II) SIS(0): Direct rendering disabled (II) SIS(0): Initialized SISCTRL extension version 0.1 (II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1 (==) RandR enabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (**) Option "Protocol" "auto" (**) Mouse0: Device: "/dev/input/mouse0" (**) Mouse0: Protocol: "auto" (**) Option "CorePointer" (**) Mouse0: Core Pointer (**) Option "Device" "/dev/input/mouse0" (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50 (**) Option "ZAxisMapping" "4 5" (**) Mouse0: ZAxisMapping: buttons 4 and 5 (**) Mouse0: Buttons: 9 (**) Option "CoreKeyboard" (**) Keyboard0: Core Keyboard (**) Option "Protocol" "standard" (**) Keyboard0: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Keyboard0: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) Keyboard0: XkbModel: "pc105" (**) Option "XkbLayout" "us" (**) Keyboard0: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) Keyboard0: CustomKeycodes disabled (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (--) Mouse0: PnP-detected protocol: "ExplorerPS/2" (II) Mouse0: ps2EnableDataReporting: succeeded > Also, double check that you are using the opengl > use-flag. I think it enables mesa since your video > card doesn;t support גרן. opengl USE flag is enabled... > > Good luck > Ben > > > --- Michael Sullivan <michael@espersunited.com> wrote: > > > Since the upgrade to modular X my wife has not been > > able to view her > > favourite screesaver (our cats.) Whenever she runs > > the GLSlideshow > > screensaver, she gets the following error: > > > > > > Xlib extension GLX missing on display ":0.0" > > > > glslideshow display :0.0 does not support the GLX > > extension > > > > I googled for this error and everywhere I looked > > people were fixing this > > error by installing proper nvidia modules. My > > problem is that I know > > nothing about nvidia or even device drivers in > > general. Do I need to > > compile nvidia drivers into her kernel? If so, > > which ones? Here's the > > lspci output from her computer: > > > > catherine X11 # lspci -v > > 00:00.0 Host bridge: Silicon Integrated Systems > > [SiS] 741/741GX/M741 > > Host (rev 03) > > Subsystem: Elitegroup Computer Systems > > Unknown device 1b13 > > Flags: bus master, medium devsel, latency 32 > > Memory at d0000000 (32-bit, > > non-prefetchable) [size=128M] > > Capabilities: [c0] AGP version 3.5 > > > > 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] > > SiS AGP Port > > (virtual PCI-to-PCI bridge) (prog-if 00 [Normal > > decode]) > > Flags: bus master, 66MHz, fast devsel, > > latency 99 > > Bus: primary=00, secondary=01, > > subordinate=01, sec-latency=32 > > I/O behind bridge: 0000d000-0000dfff > > Memory behind bridge: e1000000-e10fffff > > Prefetchable memory behind bridge: > > d8000000-dfffffff > > > > 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] > > SiS964 [MuTIOL > > Media IO] (rev 36) > > Flags: bus master, medium devsel, latency 0 > > > > 00:02.5 IDE interface: Silicon Integrated Systems > > [SiS] 5513 [IDE] (rev > > 01) (prog-if 80 [Master]) > > Subsystem: Elitegroup Computer Systems > > Unknown device 1b13 > > Flags: bus master, medium devsel, latency > > 128, IRQ 16 > > I/O ports at <unassigned> > > I/O ports at <unassigned> > > I/O ports at <unassigned> > > I/O ports at <unassigned> > > I/O ports at 4000 [size=16] > > Capabilities: [58] Power Management version > > 2 > > > > 00:02.7 Multimedia audio controller: Silicon > > Integrated Systems [SiS] > > AC'97 Sound Controller (rev a0) > > Subsystem: Elitegroup Computer Systems > > Unknown device 1b13 > > Flags: bus master, medium devsel, latency > > 32, IRQ 21 > > I/O ports at e000 [size=256] > > I/O ports at e400 [size=128] > > Capabilities: [48] Power Management version > > 2 > > > > 00:03.0 USB Controller: Silicon Integrated Systems > > [SiS] USB 1.0 > > Controller (rev 0f) (prog-if 10 [OHCI]) > > Subsystem: Elitegroup Computer Systems > > Unknown device 1b13 > > Flags: bus master, medium devsel, latency > > 32, IRQ 18 > > Memory at e1104000 (32-bit, > > non-prefetchable) [size=4K] > > > > 00:03.1 USB Controller: Silicon Integrated Systems > > [SiS] USB 1.0 > > Controller (rev 0f) (prog-if 10 [OHCI]) > > Subsystem: Elitegroup Computer Systems > > Unknown device 1b13 > > Flags: bus master, medium devsel, latency > > 32, IRQ 19 > > Memory at e1100000 (32-bit, > > non-prefetchable) [size=4K] > > > > 00:03.2 USB Controller: Silicon Integrated Systems > > [SiS] USB 1.0 > > Controller (rev 0f) (prog-if 10 [OHCI]) > > Subsystem: Elitegroup Computer Systems > > Unknown device 1b13 > > Flags: bus master, medium devsel, latency > > 32, IRQ 20 > > Memory at e1101000 (32-bit, > > non-prefetchable) [size=4K] > > > > 00:03.3 USB Controller: Silicon Integrated Systems > > [SiS] USB 2.0 > > Controller (prog-if 20 [EHCI]) > > Subsystem: Elitegroup Computer Systems > > Unknown device 1b13 > > Flags: bus master, medium devsel, latency > > 32, IRQ 17 > > Memory at e1102000 (32-bit, > > non-prefetchable) [size=4K] > > Capabilities: [50] Power Management version > > 2 > > > > 00:04.0 Ethernet controller: Silicon Integrated > > Systems [SiS] SiS900 PCI > > Fast Ethernet (rev 91) > > Subsystem: Elitegroup Computer Systems > > Unknown device 1b13 > > Flags: bus master, medium devsel, latency > > 32, IRQ 22 > > I/O ports at e800 [size=256] > > Memory at e1103000 (32-bit, > > non-prefetchable) [size=4K] > > [virtual] Expansion ROM at 10000000 > > [disabled] [size=128K] > > Capabilities: [40] Power Management version > > 2 > > > > 01:00.0 VGA compatible controller: Silicon > > Integrated Systems [SiS] > > 661/741/760/761 PCI/AGP VGA Display Adapter (prog-if > > 00 [VGA]) > > Subsystem: Elitegroup Computer Systems > > Unknown device 1b13 > > Flags: 66MHz, medium devsel, IRQ 10 > > BIST result: 00 > > Memory at d8000000 (32-bit, prefetchable) > > [size=128M] > > Memory at e1000000 (32-bit, > > non-prefetchable) [size=128K] > > I/O ports at d000 [size=128] > > Capabilities: [40] Power Management version > > 2 > > Capabilities: [50] AGP version 3.0 > > > > Please help! > > > > > > > > -- > > gentoo-user@gentoo.org mailing list > > > > > > > "He who writes the code gets to choose his license, and nobody else gets to complain" - Linus Torvale > In my honest opinion, it should read - "He who writes the code gets to choose his license, and everybody else complains." > > > > -- gentoo-user@gentoo.org mailing list ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-user] OT - GLSlideshow and nvidia (I think) 2006-07-17 14:21 ` Michael Sullivan @ 2006-07-17 19:48 ` Calvin Walton 0 siblings, 0 replies; 10+ messages in thread From: Calvin Walton @ 2006-07-17 19:48 UTC (permalink / raw To: gentoo-user On 7/17/06, Michael Sullivan <michael@espersunited.com> wrote: > Here's my /var/log/Xorg.0.log: > > (II) LoadModule: "glx" > (WW) Warning, couldn't open module glx > (II) UnloadModule: "glx" > (EE) Failed to load module "glx" (module does not exist, 0) Hmm. Does the symlink /usr/lib/xorg/modules/extensions/libglx.so exist, pointing to /usr/lib/opengl/xorg-x11/extensions/libglx.so ? If not, try running eselect opengl set xorg-x11 If it still doesn't work, you'll probably have to re-emerge x11-base/xorg-server to get back the glx module. -- Calvin Walton -- gentoo-user@gentoo.org mailing list ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2006-07-17 19:57 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2006-07-16 14:24 [gentoo-user] OT - GLSlideshow and nvidia (I think) Michael Sullivan 2006-07-16 14:43 ` [gentoo-user] OT - GLSlideshow and nvidia (I think) (no it is sis) Hemmann, Volker Armin 2006-07-16 15:36 ` Michael Sullivan 2006-07-16 16:38 ` Hemmann, Volker Armin 2006-07-17 14:16 ` Michael Sullivan 2006-07-16 17:57 ` [gentoo-user] OT - GLSlideshow and nvidia (I think) Richard Fish 2006-07-16 18:08 ` Michael Sullivan 2006-07-17 6:22 ` Schleimer, Ben 2006-07-17 14:21 ` Michael Sullivan 2006-07-17 19:48 ` Calvin Walton
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox