* [gentoo-user] Can't emerge www-client/mozilla-1.7.10-r1
@ 2005-08-01 11:45 Jules Colding
2005-08-01 17:15 ` Christoph Daldrup
2005-08-02 0:24 ` Zac Medico
0 siblings, 2 replies; 9+ messages in thread
From: Jules Colding @ 2005-08-01 11:45 UTC (permalink / raw
To: Gentoo Users
Hi,
I can't emerge mozilla-1.7.10-r1. I don't know if this is just me or if
anyone else is seeing the same, but here is what I got. Output and info
below.
Regards,
jules
############# snip ##############
omc-2 ~ # emerge -vauDN world
These are the packages that I would merge, in order:
Calculating world dependencies ...done!
[ebuild R ] www-client/mozilla-1.7.10-r1 +crypt -debug +gnome +ipv6 -java +ldap* -mozcalendar -mozdevelop -moznocompose -moznoirc -moznomail -moznoxft -mozsvg -mozxmlterm -postgres +ssl -truetype -xinerama -xprint 0 kB
[ebuild R ] gnome-extra/evolution-data-server-1.2.1-r1 -debug -doc +ipv6 -kerberos +ldap* +mozilla -nntp +ssl 0 kB
[ebuild R ] mail-client/evolution-2.2.1.1 +crypt -debug -doc +gstreamer +ipv6 -kerberos +ldap* (-mono) +mozilla -nntp -pda +spell +ssl 0 kB
[ebuild U ] media-libs/netpbm-10.28 [10.20] +jpeg +png (-svga) +tiff +zlib 2,270 kB
[ebuild U ] sys-boot/grub-0.96-r2 [0.96-r1] -netboot -static 79 kB
############# snip ##############
/var/tmp/portage/mozilla-1.7.10-r1/work/mozilla/config/nsinstall -R ./res/EditorOverride.css ./res/grabber.gif ./res/table-add-column-after-active.gif ./res/table-add-column-after-hover.gif ./res/table-add-column-after.gif ./res/table-add-column-before-active.gif ./res/table-add-column-before-hover.gif ./res/table-add-column-before.gif ./res/table-add-row-after-active.gif ./res/table-add-row-after-hover.gif ./res/table-add-row-after.gif ./res/table-add-row-before-active.gif ./res/table-add-row-before-hover.gif ./res/table-add-row-before.gif ./res/table-remove-column-active.gif ./res/table-remove-column-hover.gif ./res/table-remove-column.gif ./res/table-remove-row-active.gif ./res/table-remove-row-hover.gif ./res/table-remove-row.gif ../../../dist/bin/res
gmake[4]: Leaving directory `/var/tmp/portage/mozilla-1.7.10-r1/work/mozilla/editor/composer/src'
gmake[3]: Leaving directory `/var/tmp/portage/mozilla-1.7.10-r1/work/mozilla/editor/composer'
gmake[3]: Entering directory `/var/tmp/portage/mozilla-1.7.10-r1/work/mozilla/editor/ui'
+++ making chrome /var/tmp/portage/mozilla-1.7.10-r1/work/mozilla/editor/ui => ../../dist/bin/chrome/comm.jar
dist/bin/chrome/installed-chrome.txt.lck: No such file or directory
gmake[3]: *** [libs] Error 2
gmake[3]: Leaving directory `/var/tmp/portage/mozilla-1.7.10-r1/work/mozilla/editor/ui'
gmake[2]: *** [libs] Error 2
gmake[2]: Leaving directory `/var/tmp/portage/mozilla-1.7.10-r1/work/mozilla/editor'
gmake[1]: *** [tier_9] Error 2
gmake[1]: Leaving directory `/var/tmp/portage/mozilla-1.7.10-r1/work/mozilla'
make: *** [default] Error 2
!!! ERROR: www-client/mozilla-1.7.10-r1 failed.
!!! Function src_compile, Line 214, Exitcode 2
!!! (no error message)
!!! If you need support, post the topmost build error, NOT this status message.
############### emerge --info #################
omc-2 ~ # emerge --info
Portage 2.0.51.22-r2 (default-linux/amd64/2005.0, gcc-3.4.3, glibc-2.3.5-r0, 2.6.12-gentoo-r6 x86_64)
=================================================================
System uname: 2.6.12-gentoo-r6 x86_64 AMD Opteron(tm) Processor 252
Gentoo Base System version 1.6.13
dev-lang/python: 2.3.5
sys-apps/sandbox: 1.2.11
sys-devel/autoconf: 2.13, 2.59-r6
sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.5
sys-devel/binutils: 2.15.92.0.2-r10
sys-devel/libtool: 1.5.18-r1
virtual/os-headers: 2.6.11-r2
ACCEPT_KEYWORDS="amd64"
AUTOCLEAN="yes"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=k8 -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3/share/config /usr/lib/X11/xkb /usr/lib64/mozilla/defaults/pref /usr/share/config /usr/share/texmf/dvipdfm/config/ /usr/share/texmf/dvips/config/ /usr/share/texmf/tex/generic/config/ /usr/share/texmf/tex/platex/config/ /usr/share/texmf/xdvi/ /var/qmail/control"
CONFIG_PROTECT_MASK="/etc/gconf /etc/terminfo /etc/env.d"
CXXFLAGS="-march=k8 -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="autoconfig distlocks sandbox sfperms strict"
GENTOO_MIRRORS="http://ftp.belnet.be/mirror/rsync.gentoo.org/gentoo/ http://mirrors.sec.informatik.tu-darmstadt.de/gentoo/ http://pandemonium.tiscali.de/pub/gentoo/ ftp://ftp.snt.utwente.nl/pub/os/linux/gentoo http://mirror.gentoo.no/ http://gentoo.prz.rzeszow.pl http://ftp.du.se/pub/os/gentoo ftp://mirror.pudas.net/gentoo"
MAKEOPTS="-j1"
PKGDIR="/usr/portage/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://rsync.europe.gentoo.org/gentoo-portage"
USE="amd64 X aac aalib alsa avi berkdb bitmap-fonts bzip2 cdr crypt cups curl dvd dvdr dvdread eds emacs encode esd fam fbcon foomaticdb fortran gdbm gif gnome gstreamer gtk gtk2 hal iconv imlib ipv6 jpeg ldap libwww lzw lzw-tiff mad mozilla mp3 mpeg ncurses nls nptl nptlonly nvidia ogg opengl oss pam pdflib perl png python quicktime readline sdl spell ssl symlink tcltk tcpd tetex theora tiff truetype-fonts type1-fonts unicode usb userlocales vorbis xine xml2 xmms xpm xv xvid zlib userland_GNU kernel_linux elibc_glibc"
Unset: ASFLAGS, CTARGET, LANG, LC_ALL, LDFLAGS, LINGUAS, PORTDIR_OVERLAY
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [gentoo-user] Can't emerge www-client/mozilla-1.7.10-r1
2005-08-01 11:45 [gentoo-user] Can't emerge www-client/mozilla-1.7.10-r1 Jules Colding
@ 2005-08-01 17:15 ` Christoph Daldrup
2005-08-02 0:24 ` Zac Medico
1 sibling, 0 replies; 9+ messages in thread
From: Christoph Daldrup @ 2005-08-01 17:15 UTC (permalink / raw
To: gentoo-user
Am 08/01/2005 01:45 PM schrieb Jules Colding:
> I can't emerge mozilla-1.7.10-r1. I don't know if this is just me or if
> anyone else is seeing the same, but here is what I got. Output and info
> below.
No real solution to your problem, but maybe you should wait for 1.7.11
to be released since 1.7.10 contains some really annoying bugs regarding
the mailnews component.
http://www.mozilla.org/releases/mozilla1.7.11/changelog.html
Christoph
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [gentoo-user] Can't emerge www-client/mozilla-1.7.10-r1
2005-08-01 11:45 [gentoo-user] Can't emerge www-client/mozilla-1.7.10-r1 Jules Colding
2005-08-01 17:15 ` Christoph Daldrup
@ 2005-08-02 0:24 ` Zac Medico
2005-08-02 10:15 ` [gentoo-user] Can't emerge www-client/mozilla-1.7.10-r1 (kernel bug?) Jules Colding
1 sibling, 1 reply; 9+ messages in thread
From: Zac Medico @ 2005-08-02 0:24 UTC (permalink / raw
To: gentoo-user
Hi Jules,
Jules Colding wrote:
> Hi,
>
> I can't emerge mozilla-1.7.10-r1. I don't know if this is just me or if
> anyone else is seeing the same, but here is what I got. Output and info
> below.
>
> Regards,
> jules
>
>
> ############# snip ##############
> omc-2 ~ # emerge -vauDN world
>
> These are the packages that I would merge, in order:
>
> Calculating world dependencies ...done!
> [ebuild R ] www-client/mozilla-1.7.10-r1 +crypt -debug +gnome +ipv6 -java +ldap* -mozcalendar -mozdevelop -moznocompose -moznoirc -moznomail -moznoxft -mozsvg -mozxmlterm -postgres +ssl -truetype -xinerama -xprint 0 kB
> [ebuild R ] gnome-extra/evolution-data-server-1.2.1-r1 -debug -doc +ipv6 -kerberos +ldap* +mozilla -nntp +ssl 0 kB
> [ebuild R ] mail-client/evolution-2.2.1.1 +crypt -debug -doc +gstreamer +ipv6 -kerberos +ldap* (-mono) +mozilla -nntp -pda +spell +ssl 0 kB
> [ebuild U ] media-libs/netpbm-10.28 [10.20] +jpeg +png (-svga) +tiff +zlib 2,270 kB
> [ebuild U ] sys-boot/grub-0.96-r2 [0.96-r1] -netboot -static 79 kB
>
>
> ############# snip ##############
> /var/tmp/portage/mozilla-1.7.10-r1/work/mozilla/config/nsinstall -R ./res/EditorOverride.css ./res/grabber.gif ./res/table-add-column-after-active.gif ./res/table-add-column-after-hover.gif ./res/table-add-column-after.gif ./res/table-add-column-before-active.gif ./res/table-add-column-before-hover.gif ./res/table-add-column-before.gif ./res/table-add-row-after-active.gif ./res/table-add-row-after-hover.gif ./res/table-add-row-after.gif ./res/table-add-row-before-active.gif ./res/table-add-row-before-hover.gif ./res/table-add-row-before.gif ./res/table-remove-column-active.gif ./res/table-remove-column-hover.gif ./res/table-remove-column.gif ./res/table-remove-row-active.gif ./res/table-remove-row-hover.gif ./res/table-remove-row.gif ../../../dist/bin/res
> gmake[4]: Leaving directory `/var/tmp/portage/mozilla-1.7.10-r1/work/mozilla/editor/composer/src'
> gmake[3]: Leaving directory `/var/tmp/portage/mozilla-1.7.10-r1/work/mozilla/editor/composer'
> gmake[3]: Entering directory `/var/tmp/portage/mozilla-1.7.10-r1/work/mozilla/editor/ui'
> +++ making chrome /var/tmp/portage/mozilla-1.7.10-r1/work/mozilla/editor/ui => ../../dist/bin/chrome/comm.jar
> dist/bin/chrome/installed-chrome.txt.lck: No such file or directory
> gmake[3]: *** [libs] Error 2
> gmake[3]: Leaving directory `/var/tmp/portage/mozilla-1.7.10-r1/work/mozilla/editor/ui'
> gmake[2]: *** [libs] Error 2
> gmake[2]: Leaving directory `/var/tmp/portage/mozilla-1.7.10-r1/work/mozilla/editor'
> gmake[1]: *** [tier_9] Error 2
> gmake[1]: Leaving directory `/var/tmp/portage/mozilla-1.7.10-r1/work/mozilla'
> make: *** [default] Error 2
>
> !!! ERROR: www-client/mozilla-1.7.10-r1 failed.
> !!! Function src_compile, Line 214, Exitcode 2
> !!! (no error message)
> !!! If you need support, post the topmost build error, NOT this status message.
>
> ############### emerge --info #################
> omc-2 ~ # emerge --info
> Portage 2.0.51.22-r2 (default-linux/amd64/2005.0, gcc-3.4.3, glibc-2.3.5-r0, 2.6.12-gentoo-r6 x86_64)
> =================================================================
> System uname: 2.6.12-gentoo-r6 x86_64 AMD Opteron(tm) Processor 252
> Gentoo Base System version 1.6.13
> dev-lang/python: 2.3.5
> sys-apps/sandbox: 1.2.11
> sys-devel/autoconf: 2.13, 2.59-r6
> sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.5
> sys-devel/binutils: 2.15.92.0.2-r10
> sys-devel/libtool: 1.5.18-r1
> virtual/os-headers: 2.6.11-r2
> ACCEPT_KEYWORDS="amd64"
> AUTOCLEAN="yes"
> CBUILD="x86_64-pc-linux-gnu"
> CFLAGS="-march=k8 -O2 -pipe"
> CHOST="x86_64-pc-linux-gnu"
> CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3/share/config /usr/lib/X11/xkb /usr/lib64/mozilla/defaults/pref /usr/share/config /usr/share/texmf/dvipdfm/config/ /usr/share/texmf/dvips/config/ /usr/share/texmf/tex/generic/config/ /usr/share/texmf/tex/platex/config/ /usr/share/texmf/xdvi/ /var/qmail/control"
> CONFIG_PROTECT_MASK="/etc/gconf /etc/terminfo /etc/env.d"
> CXXFLAGS="-march=k8 -O2 -pipe"
> DISTDIR="/usr/portage/distfiles"
> FEATURES="autoconfig distlocks sandbox sfperms strict"
> GENTOO_MIRRORS="http://ftp.belnet.be/mirror/rsync.gentoo.org/gentoo/ http://mirrors.sec.informatik.tu-darmstadt.de/gentoo/ http://pandemonium.tiscali.de/pub/gentoo/ ftp://ftp.snt.utwente.nl/pub/os/linux/gentoo http://mirror.gentoo.no/ http://gentoo.prz.rzeszow.pl http://ftp.du.se/pub/os/gentoo ftp://mirror.pudas.net/gentoo"
> MAKEOPTS="-j1"
> PKGDIR="/usr/portage/packages"
> PORTAGE_TMPDIR="/var/tmp"
> PORTDIR="/usr/portage"
> SYNC="rsync://rsync.europe.gentoo.org/gentoo-portage"
> USE="amd64 X aac aalib alsa avi berkdb bitmap-fonts bzip2 cdr crypt cups curl dvd dvdr dvdread eds emacs encode esd fam fbcon foomaticdb fortran gdbm gif gnome gstreamer gtk gtk2 hal iconv imlib ipv6 jpeg ldap libwww lzw lzw-tiff mad mozilla mp3 mpeg ncurses nls nptl nptlonly nvidia ogg opengl oss pam pdflib perl png python quicktime readline sdl spell ssl symlink tcltk tcpd tetex theora tiff truetype-fonts type1-fonts unicode usb userlocales vorbis xine xml2 xmms xpm xv xvid zlib userland_GNU kernel_linux elibc_glibc"
> Unset: ASFLAGS, CTARGET, LANG, LC_ALL, LDFLAGS, LINGUAS, PORTDIR_OVERLAY
>
>
What was the solution to the segault that you reported when you tried to remerge automake and autoconf?
If you suspect hardware problems then you should try the memtest script mentioned by Francesco in this thread:
http://marc.theaimsgroup.com/?t=112208398300003
Zac
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [gentoo-user] Can't emerge www-client/mozilla-1.7.10-r1 (kernel bug?)
2005-08-02 0:24 ` Zac Medico
@ 2005-08-02 10:15 ` Jules Colding
2005-08-02 16:14 ` Richard Fish
0 siblings, 1 reply; 9+ messages in thread
From: Jules Colding @ 2005-08-02 10:15 UTC (permalink / raw
To: gentoo-user; +Cc: zmedico
On Mon, 2005-08-01 at 17:24 -0700, Zac Medico wrote:
Hi Zac,
> Hi Jules,
>
> Jules Colding wrote:
> > Hi,
> >
> > I can't emerge mozilla-1.7.10-r1. I don't know if this is just me or if
> > anyone else is seeing the same, but here is what I got. Output and info
> > below.
<snip (lots of text)>
> What was the solution to the segault that you reported when you tried
> to remerge automake and autoconf?
There are still occasional segfaults during "mkdir -p" operations in the
mkinstalldirs script when I do "make install" of various packages. I
have no clue why but re-running "make install" makes make pass over
where the error was and continue. Very weird indeed...
> If you suspect hardware problems then you should try the memtest
> script mentioned by Francesco in this thread:
I did something like that. I emerged memtest86plus as a boot option and
let it do its thing during the night. It didn't find anything though.
I tried the aforementioned script just to see if that picked up
anything. Lo and behold... it segfaulted in mkdir. I am beginning to
suspect a subtle reiserfs (mounted with noatime and notail) bug as I am
only seeing segfaults with mkdir and only under high load. There was
something in /var/log/messages as well. Script, output, log and info
below.
Regards,
jules
##### memtest.sh #####
#!/bin/bash
#
# memtest.sh
#
# Shell script to help isolate memory failures under linux
#
# Author: Doug Ledford + contributors
#
# (C) Copyright 2000-2002 Doug Ledford; Red Hat, Inc.
# This shell script is released under the terms of the GNU General
# Public License Version 2, June 1991. If you do not have a copy
# of the GNU General Public License Version 2, then one may be
# retrieved from http://people.redhat.com/dledford/GPL.html
#
# Note, this needs bash2 for the wait command support.
# This is where we will run the tests at
TEST_DIR=/home/colding/tmp
# The location of the linux kernel source file we will be using
if [ -z "$SOURCE_FILE" ]; then
SOURCE_FILE=$TEST_DIR/linux.tar.gz
fi
if [ ! -f "$SOURCE_FILE" ]; then
echo "Missing source file $SOURCE_FILE"
exit 1
fi
# How many passes to run of this test, higher numbers are better
if [ -z "$NR_PASSES" ]; then
NR_PASSES=1
fi
# Guess how many megs the unpacked archive is
if [ -z "$MEG_PER_COPY" ]; then
MEG_PER_COPY=$(ls -l $SOURCE_FILE | awk '{print int($5/1024/1024) * 4}')
fi
# How many trees do we have to unpack in order to make our trees be larger
# than physical RAM? If we don't unpack more data than memory can hold
# before we start to run the diff program on the trees then we won't
# actually flush the data to disk and force the system to reread the data
# from disk. Instead, the system will do everything in RAM. That doesn't
# work (as far as the memory test is concerned). It's the simultaneous
# unpacking of data in memory and the read/writes to hard disk via DMA that
# breaks the memory subsystem in most cases. Doing everything in RAM without
# causing disk I/O will pass bad memory far more often than when you add
# in the disk I/O.
if [ -z "$NR_SIMULTANEOUS" ]; then
NR_SIMULTANEOUS=$(free | awk -v meg_per_copy=$MEG_PER_COPY 'NR == 2 {print int($2*1.5/1024/meg_per_copy + (($2/1024)%meg_per_copy >= (meg_per_copy/2)) + (($2/1024/32) < 1))}')
fi
# Should we unpack/diff the $NR_SIMULTANEOUS trees in series or in parallel?
if [ ! -z "$PARALLEL" ]; then
PARALLEL="yes"
else
PARALLEL="no"
fi
PARALLEL="yes"
if [ ! -z "$JUST_INFO" ]; then
echo "TEST_DIR: $TEST_DIR"
echo "SOURCE_FILE: $SOURCE_FILE"
echo "NR_PASSES: $NR_PASSES"
echo "MEG_PER_COPY: $MEG_PER_COPY"
echo "NR_SIMULTANEOUS: $NR_SIMULTANEOUS"
echo "PARALLEL: $PARALLEL"
echo
exit
fi
cd $TEST_DIR
# Remove any possible left over directories from a cancelled previous run
rm -fr linux linux.orig linux.pass.*
# Unpack the one copy of the source tree that we will be comparing against
tar -xzf $SOURCE_FILE
mv linux linux.orig
i=0
while [ "$i" -lt "$NR_PASSES" ]; do
j=0
while [ "$j" -lt "$NR_SIMULTANEOUS" ]; do
if [ $PARALLEL = "yes" ]; then
(mkdir $j; tar -xzf $SOURCE_FILE -C $j; mv $j/linux linux.pass.$j; rmdir $j) &
else
tar -xzf $SOURCE_FILE
mv linux linux.pass.$j
fi
j=`expr $j + 1`
done
wait
j=0
while [ "$j" -lt "$NR_SIMULTANEOUS" ]; do
if [ $PARALLEL = "yes" ]; then
(diff -U 3 -rN linux.orig linux.pass.$j; rm -fr linux.pass.$j) &
else
diff -U 3 -rN linux.orig linux.pass.$j
rm -fr linux.pass.$j
fi
j=`expr $j + 1`
done
wait
i=`expr $i + 1`
done
# Clean up after ourselves
rm -fr linux linux.orig linux.pass.*
##### Complete script output #####
./memtest.sh: line 107: 19536 Segmentation fault mkdir $j
./memtest.sh: line 107: 19553 Segmentation fault mkdir $j
Inconsistency detected by ld.so: dynamic-link.h: 151: elf_get_dynamic_info: Assertion `info[20]->d_un.d_val == 7' failed!
Inconsistency detected by ld.so: dynamic-link.h: 151: elf_get_dynamic_info: Assertion `info[20]->d_un.d_val == 7' failed!
Inconsistency detected by ld.so: dynamic-link.h: 151: elf_get_dynamic_info: Assertion `info[20]->d_un.d_val == 7' failed!
Inconsistency detected by ld.so: dynamic-link.h: 151: elf_get_dynamic_info: Assertion `info[20]->d_un.d_val == 7' failed!
Inconsistency detected by ld.so: dynamic-link.h: 151: elf_get_dynamic_info: Assertion `info[20]->d_un.d_val == 7' failed!
Inconsistency detected by ld.so: dynamic-link.h: 151: elf_get_dynamic_info: Assertion `info[20]->d_un.d_val == 7' failed!
Inconsistency detected by ld.so: dynamic-link.h: 151: elf_get_dynamic_info: Assertion `info[20]->d_un.d_val == 7' failed!
##### /var/log/messages snippet #####
Aug 2 10:43:33 omc-2 [393507.742750] mkdir[19536]: segfault at 0000000000000000 rip 000000000040184d rsp 00007fffffe2c4b0 error 4
Aug 2 10:43:33 omc-2 [393507.818660] mkdir[19553]: segfault at 0000000000000000 rip 000000000040184d rsp 00007ffffffdb2e0 error 4
##### emerge --info #####
omc-2 tmp # emerge --info
Portage 2.0.51.22-r2 (default-linux/amd64/2005.0, gcc-3.4.3, glibc-2.3.5-r0, 2.6.12-gentoo-r6 x86_64)
=================================================================
System uname: 2.6.12-gentoo-r6 x86_64 AMD Opteron(tm) Processor 252
Gentoo Base System version 1.6.13
dev-lang/python: 2.3.5
sys-apps/sandbox: 1.2.11
sys-devel/autoconf: 2.13, 2.59-r6
sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.5
sys-devel/binutils: 2.15.92.0.2-r10
sys-devel/libtool: 1.5.18-r1
virtual/os-headers: 2.6.11-r2
ACCEPT_KEYWORDS="amd64"
AUTOCLEAN="yes"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=k8 -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3/share/config /usr/lib/X11/xkb /usr/lib64/mozilla/defaults/pref /usr/share/config /usr/share/texmf/dvipdfm/config/ /usr/share/texmf/dvips/config/ /usr/share/texmf/tex/generic/config/ /usr/share/texmf/tex/platex/config/ /usr/share/texmf/xdvi/ /var/qmail/control"
CONFIG_PROTECT_MASK="/etc/gconf /etc/terminfo /etc/env.d"
CXXFLAGS="-march=k8 -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="autoconfig distlocks sandbox sfperms strict"
GENTOO_MIRRORS="http://ftp.belnet.be/mirror/rsync.gentoo.org/gentoo/ http://mirrors.sec.informatik.tu-darmstadt.de/gentoo/ http://pandemonium.tiscali.de/pub/gentoo/ ftp://ftp.snt.utwente.nl/pub/os/linux/gentoo http://mirror.gentoo.no/ http://gentoo.prz.rzeszow.pl http://ftp.du.se/pub/os/gentoo ftp://mirror.pudas.net/gentoo"
MAKEOPTS="-j1"
PKGDIR="/usr/portage/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://rsync.europe.gentoo.org/gentoo-portage"
USE="amd64 X aac aalib alsa avi berkdb bitmap-fonts bzip2 cdr crypt cups curl dvd dvdr dvdread eds emacs encode esd fam fbcon foomaticdb fortran gdbm gif gnome gstreamer gtk gtk2 hal iconv imlib ipv6 jpeg ldap libwww lzw lzw-tiff mad mozilla mp3 mpeg ncurses nls nptl nptlonly nvidia ogg opengl oss pam pdflib perl png python quicktime readline sdl spell ssl symlink tcltk tcpd tetex theora tiff truetype-fonts type1-fonts unicode usb userlocales vorbis xine xml2 xmms xpm xv xvid zlib userland_GNU kernel_linux elibc_glibc"
Unset: ASFLAGS, CTARGET, LANG, LC_ALL, LDFLAGS, LINGUAS, PORTDIR_OVERLAY
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [gentoo-user] Can't emerge www-client/mozilla-1.7.10-r1 (kernel bug?)
2005-08-02 10:15 ` [gentoo-user] Can't emerge www-client/mozilla-1.7.10-r1 (kernel bug?) Jules Colding
@ 2005-08-02 16:14 ` Richard Fish
2005-08-03 7:30 ` Jules Colding
0 siblings, 1 reply; 9+ messages in thread
From: Richard Fish @ 2005-08-02 16:14 UTC (permalink / raw
To: gentoo-user
Jules Colding wrote:
>I tried the aforementioned script just to see if that picked up
>anything. Lo and behold... it segfaulted in mkdir. I am beginning to
>suspect a subtle reiserfs (mounted with noatime and notail) bug as I am
>only seeing segfaults with mkdir and only under high load. There was
>something in /var/log/messages as well. Script, output, log and info
>below.
>
>
>
Um, what version of reiserfs are we talking about here? I recall
reading recently on lkml (or maybe it was somewhere else..) reports that
reiser4 has known and serious problems on non-x86 platforms, and maybe
that extends to AMD64 as well....
If you are using the stable reiser3.6 (the only option available in the
gentoo-sources or vanilla-sources), well, I would be very surprised if
this was a bug there, because noatime and notail are very common options
and it is a very popular filesystem. I would put my money on bad ram or
memory timings in this case.
-Richard
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [gentoo-user] Can't emerge www-client/mozilla-1.7.10-r1 (kernel bug?)
2005-08-02 16:14 ` Richard Fish
@ 2005-08-03 7:30 ` Jules Colding
2005-08-03 7:57 ` Zac Medico
0 siblings, 1 reply; 9+ messages in thread
From: Jules Colding @ 2005-08-03 7:30 UTC (permalink / raw
To: gentoo-user
On Tue, 2005-08-02 at 18:14 +0200, Richard Fish wrote:
> Jules Colding wrote:
>
> >I tried the aforementioned script just to see if that picked up
> >anything. Lo and behold... it segfaulted in mkdir. I am beginning to
> >suspect a subtle reiserfs (mounted with noatime and notail) bug as I am
> >only seeing segfaults with mkdir and only under high load. There was
> >something in /var/log/messages as well. Script, output, log and info
> >below.
> >
> >
> >
>
> Um, what version of reiserfs are we talking about here?
Whatever is in gentoo-sources-2.6.12-r6. dmesg tells me that it is
format "3.6".
> I recall
> reading recently on lkml (or maybe it was somewhere else..) reports that
> reiser4 has known and serious problems on non-x86 platforms, and maybe
> that extends to AMD64 as well....
Yes, reiser4 is not quite stable yet.
> If you are using the stable reiser3.6 (the only option available in the
> gentoo-sources or vanilla-sources), well, I would be very surprised if
> this was a bug there, because noatime and notail are very common options
> and it is a very popular filesystem. I would put my money on bad ram or
> memory timings in this case.
I would expect other things to fail too if it was bad RAM or memory
timings, right? The only failure scenario is mkdir under high load which
to me points towards s specific problem area in the code. This is just
an unqualified guess, naturally...
--
jules
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [gentoo-user] Can't emerge www-client/mozilla-1.7.10-r1 (kernel bug?)
2005-08-03 7:30 ` Jules Colding
@ 2005-08-03 7:57 ` Zac Medico
2005-08-03 8:11 ` Jules Colding
0 siblings, 1 reply; 9+ messages in thread
From: Zac Medico @ 2005-08-03 7:57 UTC (permalink / raw
To: gentoo-user
Jules Colding wrote:
> On Tue, 2005-08-02 at 18:14 +0200, Richard Fish wrote:
>
>>Jules Colding wrote:
>>
>>
>>>I tried the aforementioned script just to see if that picked up
>>>anything. Lo and behold... it segfaulted in mkdir. I am beginning to
>>>suspect a subtle reiserfs (mounted with noatime and notail) bug as I am
>>>only seeing segfaults with mkdir and only under high load. There was
>>>something in /var/log/messages as well. Script, output, log and info
>>>below.
>>>
>>>
>>>
>>
>>Um, what version of reiserfs are we talking about here?
>
>
> Whatever is in gentoo-sources-2.6.12-r6. dmesg tells me that it is
> format "3.6".
>
>
>
>>I recall
>>reading recently on lkml (or maybe it was somewhere else..) reports that
>>reiser4 has known and serious problems on non-x86 platforms, and maybe
>>that extends to AMD64 as well....
>
>
> Yes, reiser4 is not quite stable yet.
>
>
>>If you are using the stable reiser3.6 (the only option available in the
>>gentoo-sources or vanilla-sources), well, I would be very surprised if
>>this was a bug there, because noatime and notail are very common options
>>and it is a very popular filesystem. I would put my money on bad ram or
>>memory timings in this case.
>
>
> I would expect other things to fail too if it was bad RAM or memory
> timings, right? The only failure scenario is mkdir under high load which
> to me points towards s specific problem area in the code. This is just
> an unqualified guess, naturally...
>
Can you reproduce the problem if you boot from a livecd? That could help settle the question of whether your problems are rooted in hardware or software.
Zac
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [gentoo-user] Can't emerge www-client/mozilla-1.7.10-r1 (kernel bug?)
2005-08-03 7:57 ` Zac Medico
@ 2005-08-03 8:11 ` Jules Colding
2005-08-03 19:11 ` Zac Medico
0 siblings, 1 reply; 9+ messages in thread
From: Jules Colding @ 2005-08-03 8:11 UTC (permalink / raw
To: gentoo-user
On Wed, 2005-08-03 at 00:57 -0700, Zac Medico wrote:
> Jules Colding wrote:
> > On Tue, 2005-08-02 at 18:14 +0200, Richard Fish wrote:
> >
> >>Jules Colding wrote:
> > I would expect other things to fail too if it was bad RAM or memory
> > timings, right? The only failure scenario is mkdir under high load which
> > to me points towards s specific problem area in the code. This is just
> > an unqualified guess, naturally...
> >
>
> Can you reproduce the problem if you boot from a livecd? That could
> help settle the question of whether your problems are rooted in
> hardware or software.
Would it? I must access the disk and use the RAM, so wouldn't the
results be identical provided that the same kernel is used?
If not, do you have any particular livecd in mind?
--
jules
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [gentoo-user] Can't emerge www-client/mozilla-1.7.10-r1 (kernel bug?)
2005-08-03 8:11 ` Jules Colding
@ 2005-08-03 19:11 ` Zac Medico
0 siblings, 0 replies; 9+ messages in thread
From: Zac Medico @ 2005-08-03 19:11 UTC (permalink / raw
To: gentoo-user
Jules Colding wrote:
> On Wed, 2005-08-03 at 00:57 -0700, Zac Medico wrote:
>
>>Jules Colding wrote:
>>
>>>On Tue, 2005-08-02 at 18:14 +0200, Richard Fish wrote:
>>>
>>>
>>>>Jules Colding wrote:
>
>
>>>I would expect other things to fail too if it was bad RAM or memory
>>>timings, right? The only failure scenario is mkdir under high load which
>>>to me points towards s specific problem area in the code. This is just
>>>an unqualified guess, naturally...
>>>
>>
>>Can you reproduce the problem if you boot from a livecd? That could
>>help settle the question of whether your problems are rooted in
>>hardware or software.
>
>
> Would it? I must access the disk and use the RAM, so wouldn't the
> results be identical provided that the same kernel is used?
>
> If not, do you have any particular livecd in mind?
>
I was thinking that *all* the software should be different, including the kernel. If you still experience they same segfaults then that would point to a hardware problem.
Use a livecd that may other people have tested on similar hardware. I've heard people recommend Kanotix for x86_64. There is a livecd list that can be filtered by architecture here: http://www.livecdlist.com/.
Zac
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2005-08-03 19:15 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-08-01 11:45 [gentoo-user] Can't emerge www-client/mozilla-1.7.10-r1 Jules Colding
2005-08-01 17:15 ` Christoph Daldrup
2005-08-02 0:24 ` Zac Medico
2005-08-02 10:15 ` [gentoo-user] Can't emerge www-client/mozilla-1.7.10-r1 (kernel bug?) Jules Colding
2005-08-02 16:14 ` Richard Fish
2005-08-03 7:30 ` Jules Colding
2005-08-03 7:57 ` Zac Medico
2005-08-03 8:11 ` Jules Colding
2005-08-03 19:11 ` Zac Medico
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox