From: Dale <rdalek1967@gmail.com>
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] Can't get the GUI to stay up for more than a minute or so before crashing
Date: Tue, 25 Jun 2024 13:54:33 -0500 [thread overview]
Message-ID: <102bcce2-d430-bca3-3f4a-7d6c0bf47680@gmail.com> (raw)
In-Reply-To: <2960193.e9J7NaK4W3@rogueboard>
[-- Attachment #1: Type: text/plain, Size: 2302 bytes --]
Michael wrote:
> On Tuesday, 25 June 2024 15:27:00 BST Dale wrote:
>> Picking here to get a fresh sub thread going. Attempt two.
>>
>> I got all the packages installed. Made sure the Nvidia video drivers
>> were loaded. I remembered to make sure elogind was running. It wasn't,
>> so I started it. Why doesn't display-manager pull that in???
> You need to have USE="elogind -systemd" in your make.conf, then add the
> elogind service to the *boot* runlevel as shown here:
>
> https://wiki.gentoo.org/wiki/Elogind
>
I read down through that. I did find that acl had made it into the USE
flag line. I removed it. It's not on my main rig so no idea where that
came from. I added -systemd but I think it was already set somewhere
else. The elogind flag was already set. I ran emerge -auDN world just
to be sure. It did recompile packages for the acl change but not
anything else. I also checked the drivers needed in the kernel. Looks
like they all there.
>> Does this yield any clues?
> Not yet.
>
> Can you please save and attach as plain text files your:
>
> 1. dmesg
> 2. Xorg.0.log
> 3. ~/.local/share/sddm/xorg-session.log
> 4. /var/log/sddm.log
>
> after you end up in a black screen, in case they reveal something.
Should be attached. I blanked the files and then rebooted and started
display-manager, (DM). You should have only the most recent info. I'm
also putting a chunk of messages below. It might help. It isn't much.
Same as before it seems. I still say this is something simple but hard
to find. :/
Dale
:-) :-)
Messages:
Jun 25 13:31:08 Gentoo-1 login[2726]: pam_unix(login:session): session
opened for user root(uid=0) by root(uid=0)
Jun 25 13:31:08 Gentoo-1 kernel: elogind-daemon[1945]: New session 2 of
user root.
Jun 25 13:31:08 Gentoo-1 login[2759]: ROOT LOGIN on '/dev/tty1'
Jun 25 13:31:18 Gentoo-1 kernel: nvidia-modeset: WARNING: GPU:0: Unable
to read EDID for display device DP-3
Jun 25 13:31:18 Gentoo-1 sddm-helper[2834]:
pam_unix(sddm-greeter:session): session opened for user sddm(uid=219) by
root(uid=0)
Jun 25 13:31:18 Gentoo-1 kernel: elogind-daemon[1945]: Existing logind
session ID 2 used by new audit session, ignoring.
Jun 25 13:31:18 Gentoo-1 kernel: elogind-daemon[1945]: New session c1 of
user sddm.
[-- Attachment #2: dmesg --]
[-- Type: text/plain, Size: 75843 bytes --]
[ 0.000000] Linux version 6.9.4-gentoo (root@Gentoo-1) (gcc (Gentoo 13.2.1_p20240210 p14) 13.2.1 20240210, GNU ld (Gentoo 2.42 p3) 2.42.0) #11 SMP PREEMPT_DYNAMIC Sat Jun 22 18:45:21 CDT 2024
[ 0.000000] Command line: BOOT_IMAGE=/kernel-6.9.4-6 root=UUID=26e58ee4-9c8f-4efd-bbb3-215df71cf85e ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009d1efff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009d1f000-0x0000000009ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000a20e000-0x000000000affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000ca603fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca604000-0x00000000ca967fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ca968000-0x00000000caac2fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000caac3000-0x00000000cae97fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cae98000-0x00000000cbbfefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cbbff000-0x00000000ccffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cd000000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd600000-0x00000000fd7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000102f37ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000102f380000-0x000000102fffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] e820: update [mem 0xbb5f0018-0xbb604257] usable ==> usable
[ 0.000000] e820: update [mem 0xbb5e1018-0xbb5ef067] usable ==> usable
[ 0.000000] e820: update [mem 0xbb5c1018-0xbb5e0a57] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009d1efff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000009d1f000-0x0000000009ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000a200000-0x000000000a20dfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000000a20e000-0x000000000affffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000000b020000-0x00000000bb5c1017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bb5c1018-0x00000000bb5e0a57] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bb5e0a58-0x00000000bb5e1017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bb5e1018-0x00000000bb5ef067] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bb5ef068-0x00000000bb5f0017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bb5f0018-0x00000000bb604257] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bb604258-0x00000000ca603fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ca604000-0x00000000ca967fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ca968000-0x00000000caac2fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000caac3000-0x00000000cae97fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000cae98000-0x00000000cbbfefff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000cbbff000-0x00000000ccffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000cd000000-0x00000000cfffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fd600000-0x00000000fd7fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000102f37ffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000102f380000-0x000000102fffffff] reserved
[ 0.000000] efi: EFI v2.7 by American Megatrends
[ 0.000000] efi: ACPI=0xcaac2000 ACPI 2.0=0xcaac2014 TPMFinalLog=0xcae4d000 SMBIOS=0xcb9ef000 SMBIOS 3.0=0xcb9ee000 MEMATTR=0xc71db198 ESRT=0xc71ba318 INITRD=0xbfd02c18 RNG=0xcaaa1c18 TPMEventLog=0xbfb59018
[ 0.000000] random: crng init done
[ 0.000000] efi: Remove mem71: MMIO range=[0xf0000000-0xf7ffffff] (128MB) from e820 map
[ 0.000000] e820: remove [mem 0xf0000000-0xf7ffffff] reserved
[ 0.000000] efi: Remove mem72: MMIO range=[0xfd200000-0xfd2fffff] (1MB) from e820 map
[ 0.000000] e820: remove [mem 0xfd200000-0xfd2fffff] reserved
[ 0.000000] efi: Remove mem73: MMIO range=[0xfd600000-0xfd7fffff] (2MB) from e820 map
[ 0.000000] e820: remove [mem 0xfd600000-0xfd7fffff] reserved
[ 0.000000] efi: Not removing mem74: MMIO range=[0xfea00000-0xfea0ffff] (64KB) from e820 map
[ 0.000000] efi: Remove mem75: MMIO range=[0xfeb80000-0xfec01fff] (0MB) from e820 map
[ 0.000000] e820: remove [mem 0xfeb80000-0xfec01fff] reserved
[ 0.000000] efi: Not removing mem76: MMIO range=[0xfec10000-0xfec10fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem77: MMIO range=[0xfec30000-0xfec30fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem78: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem79: MMIO range=[0xfed40000-0xfed44fff] (20KB) from e820 map
[ 0.000000] efi: Not removing mem80: MMIO range=[0xfed80000-0xfed8ffff] (64KB) from e820 map
[ 0.000000] efi: Not removing mem81: MMIO range=[0xfedc2000-0xfedcffff] (56KB) from e820 map
[ 0.000000] efi: Not removing mem82: MMIO range=[0xfedd4000-0xfedd5fff] (8KB) from e820 map
[ 0.000000] efi: Remove mem83: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[ 0.000000] SMBIOS 3.3.0 present.
[ 0.000000] DMI: ASUS System Product Name/PRIME B550-PLUS AC-HES, BIOS 3607 03/22/2024
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3792.723 MHz processor
[ 0.000123] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000125] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000129] last_pfn = 0x102f380 max_arch_pfn = 0x400000000
[ 0.000133] MTRR map: 8 entries (4 fixed + 4 variable; max 21), built from 9 variable MTRRs
[ 0.000134] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000351] e820: update [mem 0xcab90000-0xcab9ffff] usable ==> reserved
[ 0.000355] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000357] last_pfn = 0xcd000 max_arch_pfn = 0x400000000
[ 0.002474] esrt: Reserving ESRT space from 0x00000000c71ba318 to 0x00000000c71ba350.
[ 0.002479] e820: update [mem 0xc71ba000-0xc71bafff] usable ==> reserved
[ 0.002489] Using GB pages for direct mapping
[ 0.002729] Secure boot disabled
[ 0.002729] RAMDISK: [mem 0xbb70b000-0xbbe7ffff]
[ 0.002734] ACPI: Early table checksum verification disabled
[ 0.002736] ACPI: RSDP 0x00000000CAAC2014 000024 (v02 ALASKA)
[ 0.002739] ACPI: XSDT 0x00000000CAAC1728 0000D4 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.002742] ACPI: FACP 0x00000000CAAB2000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.002745] ACPI: DSDT 0x00000000CAAA6000 00B216 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.002746] ACPI: FACS 0x00000000CAE7D000 000040
[ 0.002747] ACPI: SSDT 0x00000000CAAB8000 008CE9 (v02 AMD AmdTable 00000002 MSFT 04000000)
[ 0.002749] ACPI: SSDT 0x00000000CAAB4000 003B8E (v02 AMD AMD AOD 00000001 INTL 20120913)
[ 0.002750] ACPI: SSDT 0x00000000CAAB3000 000221 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
[ 0.002751] ACPI: FIDT 0x00000000CAAA5000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.002752] ACPI: FPDT 0x00000000CA9AD000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.002753] ACPI: MCFG 0x00000000CAAA3000 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.002754] ACPI: HPET 0x00000000CAAA2000 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.002755] ACPI: IVRS 0x00000000CAAA0000 0000D0 (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.002756] ACPI: BGRT 0x00000000CAA9F000 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.002758] ACPI: WPBT 0x00000000CA9C0000 00003C (v01 ALASKA A M I 00000001 ASUS 00000001)
[ 0.002759] ACPI: TPM2 0x00000000CA9BF000 00004C (v04 ALASKA A M I 00000001 AMI 00000000)
[ 0.002760] ACPI: PCCT 0x00000000CA9BE000 00006E (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.002761] ACPI: SSDT 0x00000000CA9B9000 004133 (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.002762] ACPI: CRAT 0x00000000CA9B8000 000F10 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.002763] ACPI: CDIT 0x00000000CA9B7000 000029 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.002764] ACPI: SSDT 0x00000000CA9B6000 000259 (v02 AMD ArticDGP 00000001 INTL 20120913)
[ 0.002765] ACPI: SSDT 0x00000000CA9B2000 003E6E (v02 AMD ArticN 00000001 INTL 20120913)
[ 0.002766] ACPI: WSMT 0x00000000CA9B1000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.002768] ACPI: APIC 0x00000000CA9B0000 00015E (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.002769] ACPI: SSDT 0x00000000CA9AF000 00007D (v02 AMD ArticDIS 00000001 INTL 20120913)
[ 0.002770] ACPI: SSDT 0x00000000CA9AE000 0000BF (v01 AMD AmdTable 00001000 INTL 20120913)
[ 0.002771] ACPI: Reserving FACP table memory at [mem 0xcaab2000-0xcaab2113]
[ 0.002771] ACPI: Reserving DSDT table memory at [mem 0xcaaa6000-0xcaab1215]
[ 0.002772] ACPI: Reserving FACS table memory at [mem 0xcae7d000-0xcae7d03f]
[ 0.002772] ACPI: Reserving SSDT table memory at [mem 0xcaab8000-0xcaac0ce8]
[ 0.002772] ACPI: Reserving SSDT table memory at [mem 0xcaab4000-0xcaab7b8d]
[ 0.002773] ACPI: Reserving SSDT table memory at [mem 0xcaab3000-0xcaab3220]
[ 0.002773] ACPI: Reserving FIDT table memory at [mem 0xcaaa5000-0xcaaa509b]
[ 0.002773] ACPI: Reserving FPDT table memory at [mem 0xca9ad000-0xca9ad043]
[ 0.002774] ACPI: Reserving MCFG table memory at [mem 0xcaaa3000-0xcaaa303b]
[ 0.002774] ACPI: Reserving HPET table memory at [mem 0xcaaa2000-0xcaaa2037]
[ 0.002774] ACPI: Reserving IVRS table memory at [mem 0xcaaa0000-0xcaaa00cf]
[ 0.002775] ACPI: Reserving BGRT table memory at [mem 0xcaa9f000-0xcaa9f037]
[ 0.002775] ACPI: Reserving WPBT table memory at [mem 0xca9c0000-0xca9c003b]
[ 0.002775] ACPI: Reserving TPM2 table memory at [mem 0xca9bf000-0xca9bf04b]
[ 0.002776] ACPI: Reserving PCCT table memory at [mem 0xca9be000-0xca9be06d]
[ 0.002776] ACPI: Reserving SSDT table memory at [mem 0xca9b9000-0xca9bd132]
[ 0.002776] ACPI: Reserving CRAT table memory at [mem 0xca9b8000-0xca9b8f0f]
[ 0.002777] ACPI: Reserving CDIT table memory at [mem 0xca9b7000-0xca9b7028]
[ 0.002777] ACPI: Reserving SSDT table memory at [mem 0xca9b6000-0xca9b6258]
[ 0.002777] ACPI: Reserving SSDT table memory at [mem 0xca9b2000-0xca9b5e6d]
[ 0.002778] ACPI: Reserving WSMT table memory at [mem 0xca9b1000-0xca9b1027]
[ 0.002778] ACPI: Reserving APIC table memory at [mem 0xca9b0000-0xca9b015d]
[ 0.002778] ACPI: Reserving SSDT table memory at [mem 0xca9af000-0xca9af07c]
[ 0.002779] ACPI: Reserving SSDT table memory at [mem 0xca9ae000-0xca9ae0be]
[ 0.002821] No NUMA configuration found
[ 0.002821] Faking a node at [mem 0x0000000000000000-0x000000102f37ffff]
[ 0.002823] NODE_DATA(0) allocated [mem 0x102f37c000-0x102f37ffff]
[ 0.002847] Zone ranges:
[ 0.002847] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.002848] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.002849] Normal [mem 0x0000000100000000-0x000000102f37ffff]
[ 0.002850] Movable zone start for each node
[ 0.002850] Early memory node ranges
[ 0.002851] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.002851] node 0: [mem 0x0000000000100000-0x0000000009d1efff]
[ 0.002852] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
[ 0.002852] node 0: [mem 0x000000000a20e000-0x000000000affffff]
[ 0.002852] node 0: [mem 0x000000000b020000-0x00000000ca603fff]
[ 0.002853] node 0: [mem 0x00000000cbbff000-0x00000000ccffffff]
[ 0.002853] node 0: [mem 0x0000000100000000-0x000000102f37ffff]
[ 0.002855] Initmem setup node 0 [mem 0x0000000000001000-0x000000102f37ffff]
[ 0.002858] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.002868] On node 0, zone DMA: 96 pages in unavailable ranges
[ 0.002946] On node 0, zone DMA32: 737 pages in unavailable ranges
[ 0.002954] On node 0, zone DMA32: 14 pages in unavailable ranges
[ 0.005196] On node 0, zone DMA32: 32 pages in unavailable ranges
[ 0.005245] On node 0, zone DMA32: 5627 pages in unavailable ranges
[ 0.070642] On node 0, zone Normal: 12288 pages in unavailable ranges
[ 0.070661] On node 0, zone Normal: 3200 pages in unavailable ranges
[ 0.071150] ACPI: PM-Timer IO Port: 0x808
[ 0.071155] CPU topo: Ignoring hot-pluggable APIC ID 0 in present package.
[ 0.071158] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.071168] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
[ 0.071173] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
[ 0.071174] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.071176] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.071178] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.071178] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.071184] e820: update [mem 0xc60ad000-0xc61a0fff] usable ==> reserved
[ 0.071195] CPU topo: Max. logical packages: 1
[ 0.071195] CPU topo: Max. logical dies: 1
[ 0.071195] CPU topo: Max. dies per package: 1
[ 0.071197] CPU topo: Max. threads per core: 2
[ 0.071198] CPU topo: Num. cores per package: 8
[ 0.071198] CPU topo: Num. threads per package: 16
[ 0.071198] CPU topo: Allowing 16 present CPUs plus 0 hotplug CPUs
[ 0.071199] CPU topo: Rejected CPUs 16
[ 0.071211] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.071212] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.071213] PM: hibernation: Registered nosave memory: [mem 0x09d1f000-0x09ffffff]
[ 0.071213] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20dfff]
[ 0.071214] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[ 0.071215] PM: hibernation: Registered nosave memory: [mem 0xbb5c1000-0xbb5c1fff]
[ 0.071215] PM: hibernation: Registered nosave memory: [mem 0xbb5e0000-0xbb5e0fff]
[ 0.071216] PM: hibernation: Registered nosave memory: [mem 0xbb5e1000-0xbb5e1fff]
[ 0.071216] PM: hibernation: Registered nosave memory: [mem 0xbb5ef000-0xbb5effff]
[ 0.071217] PM: hibernation: Registered nosave memory: [mem 0xbb5f0000-0xbb5f0fff]
[ 0.071217] PM: hibernation: Registered nosave memory: [mem 0xbb604000-0xbb604fff]
[ 0.071218] PM: hibernation: Registered nosave memory: [mem 0xc60ad000-0xc61a0fff]
[ 0.071219] PM: hibernation: Registered nosave memory: [mem 0xc71ba000-0xc71bafff]
[ 0.071220] PM: hibernation: Registered nosave memory: [mem 0xca604000-0xca967fff]
[ 0.071220] PM: hibernation: Registered nosave memory: [mem 0xca968000-0xcaac2fff]
[ 0.071220] PM: hibernation: Registered nosave memory: [mem 0xcaac3000-0xcae97fff]
[ 0.071220] PM: hibernation: Registered nosave memory: [mem 0xcae98000-0xcbbfefff]
[ 0.071221] PM: hibernation: Registered nosave memory: [mem 0xcd000000-0xcfffffff]
[ 0.071222] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xfe9fffff]
[ 0.071222] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[ 0.071222] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfec0ffff]
[ 0.071222] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.071223] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[ 0.071223] PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[ 0.071223] PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[ 0.071224] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.071224] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.071224] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.071224] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.071225] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.071225] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[ 0.071225] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[ 0.071225] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[ 0.071226] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[ 0.071226] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xffffffff]
[ 0.071227] [mem 0xd0000000-0xfe9fffff] available for PCI devices
[ 0.071228] Booting paravirtualized kernel on bare hardware
[ 0.071229] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.074678] setup_percpu: NR_CPUS:64 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[ 0.075037] percpu: Embedded 56 pages/cpu s191976 r8192 d29208 u262144
[ 0.075041] pcpu-alloc: s191976 r8192 d29208 u262144 alloc=1*2097152
[ 0.075042] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.075053] Kernel command line: BOOT_IMAGE=/kernel-6.9.4-6 root=UUID=26e58ee4-9c8f-4efd-bbb3-215df71cf85e ro
[ 0.075071] Unknown kernel command line parameters "BOOT_IMAGE=/kernel-6.9.4-6", will be passed to user space.
[ 0.079237] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
[ 0.081336] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[ 0.081388] Fallback order for Node 0: 0
[ 0.081390] Built 1 zonelists, mobility grouping on. Total pages: 16493260
[ 0.081391] Policy zone: Normal
[ 0.081392] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.081423] software IO TLB: area num 16.
[ 0.160227] Memory: 65638480K/67020884K available (20480K kernel code, 3421K rwdata, 7572K rodata, 2956K init, 1712K bss, 1382144K reserved, 0K cma-reserved)
[ 0.160252] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.161251] Dynamic Preempt: voluntary
[ 0.161288] rcu: Preemptible hierarchical RCU implementation.
[ 0.161288] rcu: RCU event tracing is enabled.
[ 0.161288] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=16.
[ 0.161289] Trampoline variant of Tasks RCU enabled.
[ 0.161290] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.161290] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[ 0.161296] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
[ 0.162343] NR_IRQS: 4352, nr_irqs: 1096, preallocated irqs: 16
[ 0.162512] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.162577] Console: colour dummy device 80x25
[ 0.162579] printk: legacy console [tty0] enabled
[ 0.162803] ACPI: Core revision 20230628
[ 0.162886] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.162903] APIC: Switch to symmetric I/O mode setup
[ 0.162907] APIC: Switched APIC routing to: physical flat
[ 0.163510] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.167903] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6d56fa9ac8e, max_idle_ns: 881590436530 ns
[ 0.167907] Calibrating delay loop (skipped), value calculated using timer frequency.. 7585.44 BogoMIPS (lpj=3792723)
[ 0.167918] SVM disabled (by BIOS) in MSR_VM_CR
[ 0.167920] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.167964] LVT offset 1 assigned for vector 0xf9
[ 0.168106] LVT offset 2 assigned for vector 0xf4
[ 0.168138] Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
[ 0.168139] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[ 0.168142] process: using mwait in idle threads
[ 0.168144] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.168146] Spectre V2 : Mitigation: Retpolines
[ 0.168147] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.168148] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.168149] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.168151] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.168152] Spectre V2 : User space: Mitigation: STIBP always-on protection
[ 0.168155] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.168156] Speculative Return Stack Overflow: Mitigation: Safe RET
[ 0.168160] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.168162] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.168163] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.168164] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[ 0.168166] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
[ 0.168168] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.168170] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
[ 0.168171] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
[ 0.168172] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
[ 0.185918] Freeing SMP alternatives memory: 52K
[ 0.185924] pid_max: default: 32768 minimum: 301
[ 0.187920] LSM: initializing lsm=capability,selinux
[ 0.187926] SELinux: Initializing.
[ 0.188002] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.188073] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.291935] smpboot: CPU0: AMD Ryzen 7 5800X 8-Core Processor (family: 0x19, model: 0x21, stepping: 0x2)
[ 0.292045] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[ 0.292066] ... version: 0
[ 0.292068] ... bit width: 48
[ 0.292070] ... generic registers: 6
[ 0.292072] ... value mask: 0000ffffffffffff
[ 0.292075] ... max period: 00007fffffffffff
[ 0.292077] ... fixed-purpose events: 0
[ 0.292080] ... event mask: 000000000000003f
[ 0.292149] signal: max sigframe size: 3376
[ 0.292172] rcu: Hierarchical SRCU implementation.
[ 0.292174] rcu: Max phase no-delay instances is 400.
[ 0.295653] smp: Bringing up secondary CPUs ...
[ 0.295711] smpboot: x86: Booting SMP configuration:
[ 0.295714] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
[ 0.305957] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[ 0.312918] smp: Brought up 1 node, 16 CPUs
[ 0.312920] smpboot: Total of 16 processors activated (121367.13 BogoMIPS)
[ 0.314907] devtmpfs: initialized
[ 0.315452] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20dfff] (57344 bytes)
[ 0.315452] ACPI: PM: Registering ACPI NVS region [mem 0xcaac3000-0xcae97fff] (4018176 bytes)
[ 0.315452] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.315452] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.315452] PM: RTC time: 13:30:34, date: 2024-06-25
[ 0.315452] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.315452] audit: initializing netlink subsys (disabled)
[ 0.315452] audit: type=2000 audit(1719322234.152:1): state=initialized audit_enabled=0 res=1
[ 0.315452] thermal_sys: Registered thermal governor 'step_wise'
[ 0.315452] thermal_sys: Registered thermal governor 'user_space'
[ 0.315912] cpuidle: using governor menu
[ 0.315940] Detected 1 PCC Subspaces
[ 0.315943] Registering PCC driver as Mailbox controller
[ 0.315985] PCI: ECAM [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) for domain 0000 [bus 00-7f]
[ 0.315996] PCI: Using configuration type 1 for base access
[ 0.316059] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.316071] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.316071] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.316071] Demotion targets for Node 0: null
[ 0.332410] raid6: avx2x4 gen() 38910 MB/s
[ 0.349410] raid6: avx2x2 gen() 32951 MB/s
[ 0.366410] raid6: avx2x1 gen() 27829 MB/s
[ 0.366413] raid6: using algorithm avx2x4 gen() 38910 MB/s
[ 0.383412] raid6: .... xor() 6197 MB/s, rmw enabled
[ 0.383415] raid6: using avx2x2 recovery algorithm
[ 0.383447] ACPI: Added _OSI(Module Device)
[ 0.383450] ACPI: Added _OSI(Processor Device)
[ 0.383452] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.383455] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.393907] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.395454] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.399739] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[ 0.400078] ACPI: Interpreter enabled
[ 0.400094] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.400097] ACPI: Using IOAPIC for interrupt routing
[ 0.400463] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.400467] PCI: Ignoring E820 reservations for host bridge windows
[ 0.400735] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.419131] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.419138] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.419218] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME LTR]
[ 0.419359] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability]
[ 0.419368] acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf0000000-0xf7ffffff] for domain 0000 [bus 00-7f] only partially covers this bridge
[ 0.419633] PCI host bridge to bus 0000:00
[ 0.419636] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.419641] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.419644] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.419648] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.419651] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[ 0.419655] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfec2ffff window]
[ 0.419659] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[ 0.419663] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.419679] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000 conventional PCI endpoint
[ 0.419778] pci 0000:00:00.2: [1022:1481] type 00 class 0x080600 conventional PCI endpoint
[ 0.419876] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[ 0.419942] pci 0000:00:01.1: [1022:1483] type 01 class 0x060400 PCIe Root Port
[ 0.419962] pci 0000:00:01.1: PCI bridge to [bus 01]
[ 0.419970] pci 0000:00:01.1: bridge window [mem 0xfc800000-0xfc8fffff]
[ 0.420033] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 0.420135] pci 0000:00:01.2: [1022:1483] type 01 class 0x060400 PCIe Root Port
[ 0.420156] pci 0000:00:01.2: PCI bridge to [bus 02-08]
[ 0.420162] pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
[ 0.420167] pci 0000:00:01.2: bridge window [mem 0xfc500000-0xfc7fffff]
[ 0.420182] pci 0000:00:01.2: enabling Extended Tags
[ 0.420232] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[ 0.420377] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[ 0.420446] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[ 0.420509] pci 0000:00:03.1: [1022:1483] type 01 class 0x060400 PCIe Root Port
[ 0.420532] pci 0000:00:03.1: PCI bridge to [bus 09]
[ 0.420538] pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
[ 0.420542] pci 0000:00:03.1: bridge window [mem 0xfb000000-0xfc0fffff]
[ 0.420552] pci 0000:00:03.1: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 0.420617] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 0.420904] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[ 0.420973] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[ 0.421039] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[ 0.421101] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400 PCIe Root Port
[ 0.421120] pci 0000:00:07.1: PCI bridge to [bus 0a]
[ 0.421138] pci 0000:00:07.1: enabling Extended Tags
[ 0.421184] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[ 0.421288] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
[ 0.421351] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400 PCIe Root Port
[ 0.421372] pci 0000:00:08.1: PCI bridge to [bus 0b]
[ 0.421379] pci 0000:00:08.1: bridge window [mem 0xfc200000-0xfc4fffff]
[ 0.421394] pci 0000:00:08.1: enabling Extended Tags
[ 0.421444] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.421573] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.421692] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 conventional PCI endpoint
[ 0.421828] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000 conventional PCI endpoint
[ 0.421865] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000 conventional PCI endpoint
[ 0.421901] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000 conventional PCI endpoint
[ 0.421938] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000 conventional PCI endpoint
[ 0.421974] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000 conventional PCI endpoint
[ 0.422010] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000 conventional PCI endpoint
[ 0.422047] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000 conventional PCI endpoint
[ 0.422083] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000 conventional PCI endpoint
[ 0.422165] pci 0000:01:00.0: [144d:a80d] type 00 class 0x010802 PCIe Endpoint
[ 0.422186] pci 0000:01:00.0: BAR 0 [mem 0xfc800000-0xfc803fff 64bit]
[ 0.422430] pci 0000:00:01.1: PCI bridge to [bus 01]
[ 0.422482] pci 0000:02:00.0: [1022:43ee] type 00 class 0x0c0330 PCIe Legacy Endpoint
[ 0.422505] pci 0000:02:00.0: BAR 0 [mem 0xfc7a0000-0xfc7a7fff 64bit]
[ 0.422551] pci 0000:02:00.0: enabling Extended Tags
[ 0.422614] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.422751] pci 0000:02:00.1: [1022:43eb] type 00 class 0x010601 PCIe Legacy Endpoint
[ 0.422806] pci 0000:02:00.1: BAR 5 [mem 0xfc780000-0xfc79ffff]
[ 0.422817] pci 0000:02:00.1: ROM [mem 0xfc700000-0xfc77ffff pref]
[ 0.422826] pci 0000:02:00.1: enabling Extended Tags
[ 0.422873] pci 0000:02:00.1: PME# supported from D3hot D3cold
[ 0.422972] pci 0000:02:00.2: [1022:43e9] type 01 class 0x060400 PCIe Switch Upstream Port
[ 0.423006] pci 0000:02:00.2: PCI bridge to [bus 03-08]
[ 0.423014] pci 0000:02:00.2: bridge window [io 0xf000-0xffff]
[ 0.423019] pci 0000:02:00.2: bridge window [mem 0xfc500000-0xfc6fffff]
[ 0.423044] pci 0000:02:00.2: enabling Extended Tags
[ 0.423098] pci 0000:02:00.2: PME# supported from D3hot D3cold
[ 0.423204] pci 0000:00:01.2: PCI bridge to [bus 02-08]
[ 0.423263] pci 0000:03:00.0: [1022:43ea] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.423298] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.423333] pci 0000:03:00.0: enabling Extended Tags
[ 0.423396] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.423495] pci 0000:03:01.0: [1022:43ea] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.423530] pci 0000:03:01.0: PCI bridge to [bus 05]
[ 0.423540] pci 0000:03:01.0: bridge window [mem 0xfc600000-0xfc6fffff]
[ 0.423568] pci 0000:03:01.0: enabling Extended Tags
[ 0.423632] pci 0000:03:01.0: PME# supported from D3hot D3cold
[ 0.423728] pci 0000:03:02.0: [1022:43ea] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.423763] pci 0000:03:02.0: PCI bridge to [bus 06]
[ 0.423798] pci 0000:03:02.0: enabling Extended Tags
[ 0.423862] pci 0000:03:02.0: PME# supported from D3hot D3cold
[ 0.423961] pci 0000:03:03.0: [1022:43ea] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.423996] pci 0000:03:03.0: PCI bridge to [bus 07]
[ 0.424030] pci 0000:03:03.0: enabling Extended Tags
[ 0.424094] pci 0000:03:03.0: PME# supported from D3hot D3cold
[ 0.424198] pci 0000:03:09.0: [1022:43ea] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.424233] pci 0000:03:09.0: PCI bridge to [bus 08]
[ 0.424241] pci 0000:03:09.0: bridge window [io 0xf000-0xffff]
[ 0.424247] pci 0000:03:09.0: bridge window [mem 0xfc500000-0xfc5fffff]
[ 0.424275] pci 0000:03:09.0: enabling Extended Tags
[ 0.424339] pci 0000:03:09.0: PME# supported from D3hot D3cold
[ 0.424445] pci 0000:02:00.2: PCI bridge to [bus 03-08]
[ 0.424494] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.424567] pci 0000:05:00.0: [1b21:1166] type 00 class 0x010601 PCIe Endpoint
[ 0.424595] pci 0000:05:00.0: BAR 0 [mem 0xfc682000-0xfc683fff]
[ 0.424660] pci 0000:05:00.0: BAR 5 [mem 0xfc680000-0xfc681fff]
[ 0.424675] pci 0000:05:00.0: ROM [mem 0xfc600000-0xfc67ffff pref]
[ 0.424689] pci 0000:05:00.0: enabling Extended Tags
[ 0.424775] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.424815] pci 0000:05:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0000:03:01.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link)
[ 0.424918] pci 0000:03:01.0: PCI bridge to [bus 05]
[ 0.424968] pci 0000:03:02.0: PCI bridge to [bus 06]
[ 0.425018] pci 0000:03:03.0: PCI bridge to [bus 07]
[ 0.425096] pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
[ 0.425128] pci 0000:08:00.0: BAR 0 [io 0xf000-0xf0ff]
[ 0.425169] pci 0000:08:00.0: BAR 2 [mem 0xfc504000-0xfc504fff 64bit]
[ 0.425196] pci 0000:08:00.0: BAR 4 [mem 0xfc500000-0xfc503fff 64bit]
[ 0.425365] pci 0000:08:00.0: supports D1 D2
[ 0.425368] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.425582] pci 0000:03:09.0: PCI bridge to [bus 08]
[ 0.425672] pci 0000:09:00.0: [10de:1cb1] type 00 class 0x030000 PCIe Legacy Endpoint
[ 0.425690] pci 0000:09:00.0: BAR 0 [mem 0xfb000000-0xfbffffff]
[ 0.425705] pci 0000:09:00.0: BAR 1 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.425720] pci 0000:09:00.0: BAR 3 [mem 0xe0000000-0xe1ffffff 64bit pref]
[ 0.425731] pci 0000:09:00.0: BAR 5 [io 0xe000-0xe07f]
[ 0.425742] pci 0000:09:00.0: ROM [mem 0xfc000000-0xfc07ffff pref]
[ 0.425854] pci 0000:09:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:03.1 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[ 0.425957] pci 0000:09:00.1: [10de:0fb9] type 00 class 0x040300 PCIe Endpoint
[ 0.425973] pci 0000:09:00.1: BAR 0 [mem 0xfc080000-0xfc083fff]
[ 0.426144] pci 0000:00:03.1: PCI bridge to [bus 09]
[ 0.426188] pci 0000:0a:00.0: [1022:148a] type 00 class 0x130000 PCIe Endpoint
[ 0.426221] pci 0000:0a:00.0: enabling Extended Tags
[ 0.426358] pci 0000:00:07.1: PCI bridge to [bus 0a]
[ 0.426403] pci 0000:0b:00.0: [1022:1485] type 00 class 0x130000 PCIe Endpoint
[ 0.426441] pci 0000:0b:00.0: enabling Extended Tags
[ 0.426580] pci 0000:0b:00.1: [1022:1486] type 00 class 0x108000 PCIe Endpoint
[ 0.426600] pci 0000:0b:00.1: BAR 2 [mem 0xfc300000-0xfc3fffff]
[ 0.426614] pci 0000:0b:00.1: BAR 5 [mem 0xfc408000-0xfc409fff]
[ 0.426625] pci 0000:0b:00.1: enabling Extended Tags
[ 0.426743] pci 0000:0b:00.3: [1022:149c] type 00 class 0x0c0330 PCIe Endpoint
[ 0.426760] pci 0000:0b:00.3: BAR 0 [mem 0xfc200000-0xfc2fffff 64bit]
[ 0.426793] pci 0000:0b:00.3: enabling Extended Tags
[ 0.426845] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold
[ 0.426943] pci 0000:0b:00.4: [1022:1487] type 00 class 0x040300 PCIe Endpoint
[ 0.426955] pci 0000:0b:00.4: BAR 0 [mem 0xfc400000-0xfc407fff]
[ 0.426985] pci 0000:0b:00.4: enabling Extended Tags
[ 0.427033] pci 0000:0b:00.4: PME# supported from D0 D3hot D3cold
[ 0.427135] pci 0000:00:08.1: PCI bridge to [bus 0b]
[ 0.427522] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.427565] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.427601] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.427645] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.427685] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.427719] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.427753] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.427787] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.428462] iommu: Default domain type: Translated
[ 0.428466] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.428510] SCSI subsystem initialized
[ 0.428913] libata version 3.00 loaded.
[ 0.428930] ACPI: bus type USB registered
[ 0.428942] usbcore: registered new interface driver usbfs
[ 0.428950] usbcore: registered new interface driver hub
[ 0.428958] usbcore: registered new device driver usb
[ 0.428971] pps_core: LinuxPPS API ver. 1 registered
[ 0.428974] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.428979] PTP clock support registered
[ 0.428991] efivars: Registered efivars operations
[ 0.428991] Advanced Linux Sound Architecture Driver Initialized.
[ 0.429056] NetLabel: Initializing
[ 0.429058] NetLabel: domain hash size = 128
[ 0.429061] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.429076] NetLabel: unlabeled traffic allowed by default
[ 0.429090] PCI: Using ACPI for IRQ routing
[ 0.432783] PCI: pci_cache_line_size set to 64 bytes
[ 0.432851] e820: reserve RAM buffer [mem 0x09d1f000-0x0bffffff]
[ 0.432853] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[ 0.432854] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[ 0.432855] e820: reserve RAM buffer [mem 0xbb5c1018-0xbbffffff]
[ 0.432856] e820: reserve RAM buffer [mem 0xbb5e1018-0xbbffffff]
[ 0.432857] e820: reserve RAM buffer [mem 0xbb5f0018-0xbbffffff]
[ 0.432858] e820: reserve RAM buffer [mem 0xc60ad000-0xc7ffffff]
[ 0.432859] e820: reserve RAM buffer [mem 0xc71ba000-0xc7ffffff]
[ 0.432860] e820: reserve RAM buffer [mem 0xca604000-0xcbffffff]
[ 0.432861] e820: reserve RAM buffer [mem 0xcd000000-0xcfffffff]
[ 0.432861] e820: reserve RAM buffer [mem 0x102f380000-0x102fffffff]
[ 0.432922] pci 0000:09:00.0: vgaarb: setting as boot VGA device
[ 0.432922] pci 0000:09:00.0: vgaarb: bridge control possible
[ 0.432922] pci 0000:09:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.432926] vgaarb: loaded
[ 0.433306] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.433313] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.435905] clocksource: Switched to clocksource tsc-early
[ 0.436034] VFS: Disk quotas dquot_6.6.0
[ 0.436034] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.436034] pnp: PnP ACPI init
[ 0.436034] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.436034] system 00:01: [mem 0xfd200000-0xfd2fffff] has been reserved
[ 0.436034] system 00:03: [io 0x0290-0x029f] has been reserved
[ 0.436034] system 00:03: [io 0x0200-0x021f] has been reserved
[ 0.436441] pnp 00:04: [dma 0 disabled]
[ 0.436643] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.436647] system 00:05: [io 0x040b] has been reserved
[ 0.436651] system 00:05: [io 0x04d6] has been reserved
[ 0.436654] system 00:05: [io 0x0c00-0x0c01] has been reserved
[ 0.436657] system 00:05: [io 0x0c14] has been reserved
[ 0.436660] system 00:05: [io 0x0c50-0x0c51] has been reserved
[ 0.436663] system 00:05: [io 0x0c52] has been reserved
[ 0.436667] system 00:05: [io 0x0c6c] has been reserved
[ 0.436670] system 00:05: [io 0x0c6f] has been reserved
[ 0.436673] system 00:05: [io 0x0cd8-0x0cdf] has been reserved
[ 0.436676] system 00:05: [io 0x0800-0x089f] has been reserved
[ 0.436679] system 00:05: [io 0x0b00-0x0b0f] has been reserved
[ 0.436682] system 00:05: [io 0x0b20-0x0b3f] has been reserved
[ 0.436686] system 00:05: [io 0x0900-0x090f] has been reserved
[ 0.436689] system 00:05: [io 0x0910-0x091f] has been reserved
[ 0.436693] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.436697] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.436701] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.436705] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.436708] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
[ 0.436712] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.436715] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.437158] pnp: PnP ACPI: found 6 devices
[ 0.442771] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.442803] NET: Registered PF_INET protocol family
[ 0.442903] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.444542] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.444570] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.444577] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.444821] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.444913] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.444938] UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.445004] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.445095] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.445146] RPC: Registered named UNIX socket transport module.
[ 0.445149] RPC: Registered udp transport module.
[ 0.445151] RPC: Registered tcp transport module.
[ 0.445154] RPC: Registered tcp-with-tls transport module.
[ 0.445156] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.445467] pci 0000:00:01.1: PCI bridge to [bus 01]
[ 0.445473] pci 0000:00:01.1: bridge window [mem 0xfc800000-0xfc8fffff]
[ 0.445481] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.445494] pci 0000:03:01.0: PCI bridge to [bus 05]
[ 0.445500] pci 0000:03:01.0: bridge window [mem 0xfc600000-0xfc6fffff]
[ 0.445510] pci 0000:03:02.0: PCI bridge to [bus 06]
[ 0.445523] pci 0000:03:03.0: PCI bridge to [bus 07]
[ 0.445536] pci 0000:03:09.0: PCI bridge to [bus 08]
[ 0.445540] pci 0000:03:09.0: bridge window [io 0xf000-0xffff]
[ 0.445546] pci 0000:03:09.0: bridge window [mem 0xfc500000-0xfc5fffff]
[ 0.445556] pci 0000:02:00.2: PCI bridge to [bus 03-08]
[ 0.445560] pci 0000:02:00.2: bridge window [io 0xf000-0xffff]
[ 0.445567] pci 0000:02:00.2: bridge window [mem 0xfc500000-0xfc6fffff]
[ 0.445576] pci 0000:00:01.2: PCI bridge to [bus 02-08]
[ 0.445580] pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
[ 0.445585] pci 0000:00:01.2: bridge window [mem 0xfc500000-0xfc7fffff]
[ 0.445592] pci 0000:00:03.1: PCI bridge to [bus 09]
[ 0.445596] pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
[ 0.445601] pci 0000:00:03.1: bridge window [mem 0xfb000000-0xfc0fffff]
[ 0.445606] pci 0000:00:03.1: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 0.445612] pci 0000:00:07.1: PCI bridge to [bus 0a]
[ 0.445621] pci 0000:00:08.1: PCI bridge to [bus 0b]
[ 0.445625] pci 0000:00:08.1: bridge window [mem 0xfc200000-0xfc4fffff]
[ 0.445633] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.445636] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.445639] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.445642] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.445646] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[ 0.445649] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xfec2ffff window]
[ 0.445652] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
[ 0.445656] pci_bus 0000:01: resource 1 [mem 0xfc800000-0xfc8fffff]
[ 0.445659] pci_bus 0000:02: resource 0 [io 0xf000-0xffff]
[ 0.445662] pci_bus 0000:02: resource 1 [mem 0xfc500000-0xfc7fffff]
[ 0.445666] pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
[ 0.445668] pci_bus 0000:03: resource 1 [mem 0xfc500000-0xfc6fffff]
[ 0.445672] pci_bus 0000:05: resource 1 [mem 0xfc600000-0xfc6fffff]
[ 0.445675] pci_bus 0000:08: resource 0 [io 0xf000-0xffff]
[ 0.445678] pci_bus 0000:08: resource 1 [mem 0xfc500000-0xfc5fffff]
[ 0.445681] pci_bus 0000:09: resource 0 [io 0xe000-0xefff]
[ 0.445684] pci_bus 0000:09: resource 1 [mem 0xfb000000-0xfc0fffff]
[ 0.445687] pci_bus 0000:09: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 0.445691] pci_bus 0000:0b: resource 1 [mem 0xfc200000-0xfc4fffff]
[ 0.445863] pci 0000:09:00.1: extending delay after power-on from D3hot to 20 msec
[ 0.445887] pci 0000:09:00.1: D0 power state depends on 0000:09:00.0
[ 0.446018] PCI: CLS 64 bytes, default 64
[ 0.446068] Unpacking initramfs...
[ 0.447565] AMD-Vi: Using global IVHD EFR:0x0, EFR2:0x0
[ 0.504734] Freeing initrd memory: 7636K
[ 0.766396] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[ 0.766447] pci 0000:00:01.0: Adding to iommu group 0
[ 0.766463] pci 0000:00:01.1: Adding to iommu group 1
[ 0.766477] pci 0000:00:01.2: Adding to iommu group 2
[ 0.766496] pci 0000:00:02.0: Adding to iommu group 3
[ 0.766516] pci 0000:00:03.0: Adding to iommu group 4
[ 0.766531] pci 0000:00:03.1: Adding to iommu group 5
[ 0.766550] pci 0000:00:04.0: Adding to iommu group 6
[ 0.766569] pci 0000:00:05.0: Adding to iommu group 7
[ 0.766589] pci 0000:00:07.0: Adding to iommu group 8
[ 0.766604] pci 0000:00:07.1: Adding to iommu group 9
[ 0.766624] pci 0000:00:08.0: Adding to iommu group 10
[ 0.766638] pci 0000:00:08.1: Adding to iommu group 11
[ 0.766663] pci 0000:00:14.0: Adding to iommu group 12
[ 0.766677] pci 0000:00:14.3: Adding to iommu group 12
[ 0.766737] pci 0000:00:18.0: Adding to iommu group 13
[ 0.766751] pci 0000:00:18.1: Adding to iommu group 13
[ 0.766765] pci 0000:00:18.2: Adding to iommu group 13
[ 0.766779] pci 0000:00:18.3: Adding to iommu group 13
[ 0.766793] pci 0000:00:18.4: Adding to iommu group 13
[ 0.766807] pci 0000:00:18.5: Adding to iommu group 13
[ 0.766821] pci 0000:00:18.6: Adding to iommu group 13
[ 0.766835] pci 0000:00:18.7: Adding to iommu group 13
[ 0.766849] pci 0000:01:00.0: Adding to iommu group 14
[ 0.766880] pci 0000:02:00.0: Adding to iommu group 15
[ 0.766896] pci 0000:02:00.1: Adding to iommu group 15
[ 0.766912] pci 0000:02:00.2: Adding to iommu group 15
[ 0.766919] pci 0000:03:00.0: Adding to iommu group 15
[ 0.766925] pci 0000:03:01.0: Adding to iommu group 15
[ 0.766931] pci 0000:03:02.0: Adding to iommu group 15
[ 0.766938] pci 0000:03:03.0: Adding to iommu group 15
[ 0.766944] pci 0000:03:09.0: Adding to iommu group 15
[ 0.766951] pci 0000:05:00.0: Adding to iommu group 15
[ 0.766958] pci 0000:08:00.0: Adding to iommu group 15
[ 0.766984] pci 0000:09:00.0: Adding to iommu group 16
[ 0.767001] pci 0000:09:00.1: Adding to iommu group 16
[ 0.767016] pci 0000:0a:00.0: Adding to iommu group 17
[ 0.767031] pci 0000:0b:00.0: Adding to iommu group 18
[ 0.767047] pci 0000:0b:00.1: Adding to iommu group 19
[ 0.767064] pci 0000:0b:00.3: Adding to iommu group 20
[ 0.767080] pci 0000:0b:00.4: Adding to iommu group 21
[ 0.768226] AMD-Vi: Extended features (0x58f77ef22294a5a, 0x0): PPR NX GT IA PC GA_vAPIC
[ 0.768298] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.768304] software IO TLB: mapped [mem 0x00000000b75c1000-0x00000000bb5c1000] (64MB)
[ 0.768313] ACPI: bus type thunderbolt registered
[ 0.768410] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[ 0.768415] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 0.768419] LVT offset 0 assigned for vector 0x400
[ 0.768474] perf: AMD IBS detected (0x000003ff)
[ 0.768524] amd_uncore: 4 amd_df counters detected
[ 0.768529] amd_uncore: 6 amd_l3 counters detected
[ 0.768578] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 0.769719] Initialise system trusted keyrings
[ 0.769742] workingset: timestamp_bits=56 max_order=24 bucket_order=0
[ 0.769859] NFS: Registering the id_resolver key type
[ 0.769864] Key type id_resolver registered
[ 0.769867] Key type id_legacy registered
[ 0.769873] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.769877] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.769984] SGI XFS with security attributes, no debug enabled
[ 0.770047] 9p: Installing v9fs 9p2000 file system support
[ 0.777585] xor: automatically using best checksumming function avx
[ 0.777590] Key type asymmetric registered
[ 0.777593] Asymmetric key parser 'x509' registered
[ 0.777603] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.777614] io scheduler mq-deadline registered
[ 0.777617] io scheduler kyber registered
[ 0.777692] gpio_it87: no device
[ 0.778810] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.778833] ACPI: button: Power Button [PWRB]
[ 0.778864] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.778897] ACPI: button: Power Button [PWRF]
[ 0.779807] Estimated ratio of average max frequency by base frequency (times 1024): 1165
[ 0.779818] Monitor-Mwait will be used to enter C-1 state
[ 0.779821] ACPI: \_SB_.PLTF.C000: Found 2 idle states
[ 0.779913] ACPI: \_SB_.PLTF.C002: Found 2 idle states
[ 0.779982] ACPI: \_SB_.PLTF.C004: Found 2 idle states
[ 0.780049] ACPI: \_SB_.PLTF.C006: Found 2 idle states
[ 0.780117] ACPI: \_SB_.PLTF.C008: Found 2 idle states
[ 0.780183] ACPI: \_SB_.PLTF.C00A: Found 2 idle states
[ 0.780250] ACPI: \_SB_.PLTF.C00C: Found 2 idle states
[ 0.780317] ACPI: \_SB_.PLTF.C00E: Found 2 idle states
[ 0.780383] ACPI: \_SB_.PLTF.C001: Found 2 idle states
[ 0.780464] ACPI: \_SB_.PLTF.C003: Found 2 idle states
[ 0.780544] ACPI: \_SB_.PLTF.C005: Found 2 idle states
[ 0.780628] ACPI: \_SB_.PLTF.C007: Found 2 idle states
[ 0.780709] ACPI: \_SB_.PLTF.C009: Found 2 idle states
[ 0.780788] ACPI: \_SB_.PLTF.C00B: Found 2 idle states
[ 0.780872] ACPI: \_SB_.PLTF.C00D: Found 2 idle states
[ 0.780939] ACPI: \_SB_.PLTF.C00F: Found 2 idle states
[ 0.781074] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.781165] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.781539] Non-volatile memory driver v1.3
[ 0.781542] Linux agpgart interface v0.103
[ 0.781809] ACPI: bus type drm_connector registered
[ 0.783724] loop: module loaded
[ 0.783782] Key type psk registered
[ 0.783942] nvme nvme0: pci function 0000:01:00.0
[ 0.783976] ahci 0000:02:00.1: version 3.0
[ 0.784071] ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled
[ 0.784127] ahci 0000:02:00.1: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[ 0.784132] ahci 0000:02:00.1: 6/6 ports implemented (port mask 0x3f)
[ 0.784136] ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[ 0.784529] scsi host0: ahci
[ 0.784600] scsi host1: ahci
[ 0.784667] scsi host2: ahci
[ 0.784731] scsi host3: ahci
[ 0.784792] scsi host4: ahci
[ 0.784854] scsi host5: ahci
[ 0.784883] ata1: SATA max UDMA/133 abar m131072@0xfc780000 port 0xfc780100 irq 43 lpm-pol 0
[ 0.784888] ata2: SATA max UDMA/133 abar m131072@0xfc780000 port 0xfc780180 irq 43 lpm-pol 0
[ 0.784893] ata3: SATA max UDMA/133 abar m131072@0xfc780000 port 0xfc780200 irq 43 lpm-pol 0
[ 0.784897] ata4: SATA max UDMA/133 abar m131072@0xfc780000 port 0xfc780280 irq 43 lpm-pol 0
[ 0.784901] ata5: SATA max UDMA/133 abar m131072@0xfc780000 port 0xfc780300 irq 43 lpm-pol 0
[ 0.784906] ata6: SATA max UDMA/133 abar m131072@0xfc780000 port 0xfc780380 irq 43 lpm-pol 0
[ 0.785114] ahci 0000:05:00.0: SSS flag set, parallel bus scan disabled
[ 0.795577] ahci 0000:05:00.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[ 0.795584] ahci 0000:05:00.0: 30/32 ports implemented (port mask 0xffffff3f)
[ 0.795589] ahci 0000:05:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst
[ 0.796463] nvme nvme0: D3 entry latency set to 10 seconds
[ 0.797693] scsi host6: ahci
[ 0.797762] scsi host7: ahci
[ 0.797831] scsi host8: ahci
[ 0.797896] scsi host9: ahci
[ 0.797959] scsi host10: ahci
[ 0.798021] scsi host11: ahci
[ 0.798082] scsi host12: ahci
[ 0.798147] scsi host13: ahci
[ 0.798208] scsi host14: ahci
[ 0.798271] scsi host15: ahci
[ 0.798339] scsi host16: ahci
[ 0.798407] scsi host17: ahci
[ 0.798478] scsi host18: ahci
[ 0.798548] scsi host19: ahci
[ 0.798620] scsi host20: ahci
[ 0.798693] scsi host21: ahci
[ 0.798765] scsi host22: ahci
[ 0.798838] scsi host23: ahci
[ 0.798910] scsi host24: ahci
[ 0.798981] scsi host25: ahci
[ 0.799051] scsi host26: ahci
[ 0.799125] scsi host27: ahci
[ 0.799201] scsi host28: ahci
[ 0.799274] scsi host29: ahci
[ 0.799350] scsi host30: ahci
[ 0.799425] scsi host31: ahci
[ 0.799501] scsi host32: ahci
[ 0.799578] scsi host33: ahci
[ 0.799658] scsi host34: ahci
[ 0.799734] scsi host35: ahci
[ 0.799812] scsi host36: ahci
[ 0.799888] scsi host37: ahci
[ 0.799925] ata7: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc680100 irq 44 lpm-pol 0
[ 0.799931] ata8: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc680180 irq 44 lpm-pol 0
[ 0.799935] ata9: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc680200 irq 44 lpm-pol 0
[ 0.799940] ata10: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc680280 irq 44 lpm-pol 0
[ 0.799945] ata11: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc680300 irq 44 lpm-pol 0
[ 0.799951] ata12: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc680380 irq 44 lpm-pol 0
[ 0.799957] ata13: DUMMY
[ 0.799959] ata14: DUMMY
[ 0.799960] ata15: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc680500 irq 44 lpm-pol 0
[ 0.799966] ata16: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc680580 irq 44 lpm-pol 0
[ 0.799971] ata17: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc680600 irq 44 lpm-pol 0
[ 0.799976] ata18: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc680680 irq 44 lpm-pol 0
[ 0.799981] ata19: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc680700 irq 44 lpm-pol 0
[ 0.799986] ata20: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc680780 irq 44 lpm-pol 0
[ 0.799992] ata21: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc680800 irq 44 lpm-pol 0
[ 0.799997] ata22: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc680880 irq 44 lpm-pol 0
[ 0.800002] ata23: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc680900 irq 44 lpm-pol 0
[ 0.800007] ata24: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc680980 irq 44 lpm-pol 0
[ 0.800013] ata25: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc680a00 irq 44 lpm-pol 0
[ 0.800018] ata26: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc680a80 irq 44 lpm-pol 0
[ 0.800023] ata27: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc680b00 irq 44 lpm-pol 0
[ 0.800029] ata28: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc680b80 irq 44 lpm-pol 0
[ 0.800034] ata29: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc680c00 irq 44 lpm-pol 0
[ 0.800039] ata30: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc680c80 irq 44 lpm-pol 0
[ 0.800045] ata31: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc680d00 irq 44 lpm-pol 0
[ 0.800050] ata32: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc680d80 irq 44 lpm-pol 0
[ 0.800056] ata33: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc680e00 irq 44 lpm-pol 0
[ 0.800061] ata34: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc680e80 irq 44 lpm-pol 0
[ 0.800066] ata35: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc680f00 irq 44 lpm-pol 0
[ 0.800072] ata36: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc680f80 irq 44 lpm-pol 0
[ 0.800078] ata37: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc681000 irq 44 lpm-pol 0
[ 0.800083] ata38: SATA max UDMA/133 abar m8192@0xfc680000 port 0xfc681080 irq 44 lpm-pol 0
[ 0.800313] e100: Intel(R) PRO/100 Network Driver
[ 0.800316] e100: Copyright(c) 1999-2006 Intel Corporation
[ 0.800328] e1000: Intel(R) PRO/1000 Network Driver
[ 0.800331] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.800343] e1000e: Intel(R) PRO/1000 Network Driver
[ 0.800345] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.800359] sky2: driver version 1.30
[ 0.802915] nvme nvme0: allocated 64 MiB host memory buffer.
[ 0.807442] modprobe (252) used greatest stack depth: 13296 bytes left
[ 0.807630] r8169 0000:08:00.0 eth0: RTL8168h/8111h, 10:7c:61:3d:b1:e8, XID 541, IRQ 45
[ 0.807636] r8169 0000:08:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 0.807786] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.807816] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 0.829277] nvme nvme0: 16/0/0 default/read/poll queues
[ 0.834223] nvme0n1: p1 p2 p3 p4 p5
[ 0.863242] xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
[ 0.863463] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.863492] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 0.863497] xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.863547] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
[ 0.863552] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.863555] usb usb1: Product: xHCI Host Controller
[ 0.863558] usb usb1: Manufacturer: Linux 6.9.4-gentoo xhci-hcd
[ 0.863561] usb usb1: SerialNumber: 0000:02:00.0
[ 0.863676] hub 1-0:1.0: USB hub found
[ 0.863692] hub 1-0:1.0: 10 ports detected
[ 0.872580] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.872597] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.09
[ 0.872601] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.872605] usb usb2: Product: xHCI Host Controller
[ 0.872608] usb usb2: Manufacturer: Linux 6.9.4-gentoo xhci-hcd
[ 0.872611] usb usb2: SerialNumber: 0000:02:00.0
[ 0.872677] hub 2-0:1.0: USB hub found
[ 0.872688] hub 2-0:1.0: 4 ports detected
[ 0.876599] usb: port power management may be unreliable
[ 0.876701] xhci_hcd 0000:0b:00.3: xHCI Host Controller
[ 0.876731] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 3
[ 0.876843] xhci_hcd 0000:0b:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
[ 0.877031] xhci_hcd 0000:0b:00.3: xHCI Host Controller
[ 0.877055] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 4
[ 0.877060] xhci_hcd 0000:0b:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.877083] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
[ 0.877087] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.877092] usb usb3: Product: xHCI Host Controller
[ 0.877094] usb usb3: Manufacturer: Linux 6.9.4-gentoo xhci-hcd
[ 0.877097] usb usb3: SerialNumber: 0000:0b:00.3
[ 0.877169] hub 3-0:1.0: USB hub found
[ 0.877177] hub 3-0:1.0: 4 ports detected
[ 0.877348] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.877364] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.09
[ 0.877369] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.877372] usb usb4: Product: xHCI Host Controller
[ 0.877375] usb usb4: Manufacturer: Linux 6.9.4-gentoo xhci-hcd
[ 0.877378] usb usb4: SerialNumber: 0000:0b:00.3
[ 0.877441] hub 4-0:1.0: USB hub found
[ 0.877449] hub 4-0:1.0: 4 ports detected
[ 0.877601] usbcore: registered new interface driver usblp
[ 0.877616] usbcore: registered new interface driver usb-storage
[ 0.877639] i8042: PNP: No PS/2 controller found.
[ 0.877684] mousedev: PS/2 mouse device common for all mice
[ 0.877748] rtc_cmos 00:02: RTC can wake from S4
[ 0.877943] rtc_cmos 00:02: registered as rtc0
[ 0.877967] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
[ 0.877979] i2c_dev: i2c /dev entries driver
[ 0.878056] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 0.878060] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 0.878133] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 0.878200] fail to initialize ptp_kvm
[ 0.878509] nct6775: Found NCT6798D or compatible chip at 0x2e:0x290
[ 0.909119] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[ 0.909128] amd_pstate: driver load is disabled, boot with specific mode to enable this
[ 0.909150] efifb: probing for efifb
[ 0.909158] efifb: framebuffer at 0xd0000000, using 8640k, total 8640k
[ 0.909161] efifb: mode is 1920x1080x32, linelength=8192, pages=1
[ 0.909164] efifb: scrolling: redraw
[ 0.909166] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.911973] Console: switching to colour frame buffer device 240x67
[ 0.914852] fb0: EFI VGA frame buffer device
[ 0.914889] ccp 0000:0b:00.1: enabling device (0000 -> 0002)
[ 0.914964] ccp 0000:0b:00.1: ccp: unable to access the device: you might be running a broken BIOS.
[ 0.914994] ccp 0000:0b:00.1: psp enabled
[ 0.915012] ccp_crypto: Cannot load: there are no available CCPs
[ 0.915034] hid: raw HID events driver (C) Jiri Kosina
[ 0.915145] usbcore: registered new interface driver usbhid
[ 0.915158] usbhid: USB HID core driver
[ 0.915338] snd_hda_intel 0000:09:00.1: enabling device (0000 -> 0002)
[ 0.915383] snd_hda_intel 0000:09:00.1: Disabling MSI
[ 0.915409] snd_hda_intel 0000:0b:00.4: enabling device (0000 -> 0002)
[ 0.915839] Initializing XFRM netlink socket
[ 0.915861] NET: Registered PF_INET6 protocol family
[ 0.916040] Segment Routing with IPv6
[ 0.916058] In-situ OAM (IOAM) with IPv6
[ 0.916092] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 0.916203] NET: Registered PF_PACKET protocol family
[ 0.916234] 9pnet: Installing 9P2000 support
[ 0.916255] Key type dns_resolver registered
[ 0.917184] microcode: Current revision: 0x0a20120e
[ 0.917321] IPI shorthand broadcast: enabled
[ 0.919502] sched_clock: Marking stable (918440279, 366487)->(1043004744, -124197978)
[ 0.919574] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
[ 0.919666] registered taskstats version 1
[ 0.919677] Loading compiled-in X.509 certificates
[ 0.921363] Btrfs loaded, zoned=no, fsverity=no
[ 0.921427] PM: Magic number: 12:734:534
[ 0.921495] printk: legacy console [netcon0] enabled
[ 0.921509] netconsole: network logging started
[ 0.922503] snd_hda_intel 0000:09:00.1: Cannot probe codecs, giving up
[ 0.937460] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 0.938853] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 0.938976] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 0.939005] ALSA device list:
[ 0.939016] No soundcards found.
[ 0.939046] Loading firmware: regulatory.db
[ 0.939072] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 0.939096] cfg80211: failed to load regulatory.db
[ 1.097456] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.105519] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.171332] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[ 1.462862] usb 1-5: New USB device found, idVendor=13d3, idProduct=3556, bcdDevice= 1.10
[ 1.463606] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.464319] usb 1-5: Product: Bluetooth Radio
[ 1.465009] usb 1-5: Manufacturer: Realtek
[ 1.465673] usb 1-5: SerialNumber: 00e04c000001
[ 1.570688] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.574710] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN03, max UDMA/100
[ 1.580122] ata2.00: configured for UDMA/100
[ 1.589991] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN03 PQ: 0 ANSI: 5
[ 1.624090] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.624793] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.642241] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.642310] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.667692] usb 1-6: new full-speed USB device number 3 using xhci_hcd
[ 1.794693] tsc: Refined TSC clocksource calibration: 3792.873 MHz
[ 1.795431] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d5818a734c, max_idle_ns: 881590694765 ns
[ 1.796263] clocksource: Switched to clocksource tsc
[ 1.951757] ata3: SATA link down (SStatus 0 SControl 330)
[ 2.030829] usb 1-6: config 1 has an invalid interface number: 2 but max is 1
[ 2.031561] usb 1-6: config 1 has no interface number 1
[ 2.043617] usb 1-6: New USB device found, idVendor=0b05, idProduct=1939, bcdDevice= 1.00
[ 2.044341] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.045054] usb 1-6: Product: AURA LED Controller
[ 2.045722] usb 1-6: Manufacturer: AsusTek Computer Inc.
[ 2.046391] usb 1-6: SerialNumber: 9876543210
[ 2.064034] hid-generic 0003:0B05:1939.0001: hiddev96,hidraw0: USB HID v1.11 Device [AsusTek Computer Inc. AURA LED Controller] on usb-0000:02:00.0-6/input2
[ 2.241685] usb 1-7: new high-speed USB device number 4 using xhci_hcd
[ 2.264674] ata4: SATA link down (SStatus 0 SControl 330)
[ 2.456345] usb 1-7: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=60.70
[ 2.457095] usb 1-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.457808] usb 1-7: Product: USB2.0 Hub
[ 2.468407] hub 1-7:1.0: USB hub found
[ 2.473329] hub 1-7:1.0: 4 ports detected
[ 2.580676] ata5: SATA link down (SStatus 0 SControl 330)
[ 2.671704] usb 1-9: new low-speed USB device number 5 using xhci_hcd
[ 2.888278] ata6: SATA link down (SStatus 0 SControl 330)
[ 2.975223] usb 1-9: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
[ 2.975975] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.976694] usb 1-9: Product: USB Optical Mouse
[ 2.977397] usb 1-9: Manufacturer: Logitech
[ 2.997108] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-9/1-9:1.0/0003:046D:C077.0002/input/input2
[ 2.997997] hid-generic 0003:046D:C077.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-9/input0
[ 3.175675] usb 1-10: new low-speed USB device number 6 using xhci_hcd
[ 3.200721] ata8: SATA link down (SStatus 0 SControl 300)
[ 3.479917] usb 1-10: New USB device found, idVendor=413c, idProduct=2107, bcdDevice= 1.04
[ 3.480728] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.481503] usb 1-10: Product: Dell USB Entry Keyboard
[ 3.482267] usb 1-10: Manufacturer: DELL
[ 3.508164] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-10/1-10:1.0/0003:413C:2107.0003/input/input3
[ 3.511977] ata9: SATA link down (SStatus 0 SControl 300)
[ 3.560904] hid-generic 0003:413C:2107.0003: input,hidraw2: USB HID v1.11 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:02:00.0-10/input0
[ 3.824722] ata10: SATA link down (SStatus 0 SControl 300)
[ 4.136448] ata11: SATA link down (SStatus 0 SControl 300)
[ 4.448728] ata12: SATA link down (SStatus 0 SControl 300)
[ 4.760680] ata15: SATA link down (SStatus 0 SControl 300)
[ 5.072869] ata16: SATA link down (SStatus 0 SControl 300)
[ 5.384686] ata17: SATA link down (SStatus 0 SControl 300)
[ 5.696819] ata18: SATA link down (SStatus 0 SControl 300)
[ 6.008668] ata19: SATA link down (SStatus 0 SControl 300)
[ 6.320815] ata20: SATA link down (SStatus 0 SControl 300)
[ 6.632664] ata21: SATA link down (SStatus 0 SControl 300)
[ 6.944671] ata22: SATA link down (SStatus 0 SControl 300)
[ 7.256546] ata23: SATA link down (SStatus 0 SControl 300)
[ 7.568659] ata24: SATA link down (SStatus 0 SControl 300)
[ 7.880157] ata25: SATA link down (SStatus 0 SControl 300)
[ 8.192884] ata26: SATA link down (SStatus 0 SControl 300)
[ 8.504684] ata27: SATA link down (SStatus 0 SControl 300)
[ 8.816647] ata28: SATA link down (SStatus 0 SControl 300)
[ 9.128244] ata29: SATA link down (SStatus 0 SControl 300)
[ 9.440096] ata30: SATA link down (SStatus 0 SControl 300)
[ 9.752746] ata31: SATA link down (SStatus 0 SControl 300)
[ 10.064648] ata32: SATA link down (SStatus 0 SControl 300)
[ 10.376678] ata33: SATA link down (SStatus 0 SControl 300)
[ 10.688668] ata34: SATA link down (SStatus 0 SControl 300)
[ 11.000735] ata35: SATA link down (SStatus 0 SControl 300)
[ 11.312670] ata36: SATA link down (SStatus 0 SControl 300)
[ 11.624670] ata37: SATA link down (SStatus 0 SControl 300)
[ 11.936827] ata38: SATA link down (SStatus 0 SControl 300)
[ 11.937943] Freeing unused kernel image (initmem) memory: 2956K
[ 11.938597] Write protecting the kernel read-only data: 28672k
[ 11.939391] Freeing unused kernel image (rodata/data gap) memory: 620K
[ 11.975820] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 11.976460] Run /init as init process
[ 11.977069] with arguments:
[ 11.977070] /init
[ 11.977071] with environment:
[ 11.977072] HOME=/
[ 11.977073] TERM=linux
[ 11.977073] BOOT_IMAGE=/kernel-6.9.4-6
[ 11.986935] findmnt (285) used greatest stack depth: 13232 bytes left
[ 12.004382] dracut: Gentoo-2.15
[ 12.397014] EXT4-fs (nvme0n1p3): mounted filesystem 26e58ee4-9c8f-4efd-bbb3-215df71cf85e ro with ordered data mode. Quota mode: none.
[ 12.397725] mount (523) used greatest stack depth: 13216 bytes left
[ 12.410815] EXT4-fs (nvme0n1p3): unmounting filesystem 26e58ee4-9c8f-4efd-bbb3-215df71cf85e.
[ 12.414845] dracut: Checking ext4: /dev/nvme0n1p3
[ 12.415550] dracut: issuing e2fsck -a /dev/nvme0n1p3
[ 12.422076] dracut: root-fs: clean, 419124/26214400 files, 5588384/104857600 blocks
[ 12.423641] dracut: Mounting /dev/disk/by-uuid/26e58ee4-9c8f-4efd-bbb3-215df71cf85e with -o defaults,ro
[ 12.427531] EXT4-fs (nvme0n1p3): mounted filesystem 26e58ee4-9c8f-4efd-bbb3-215df71cf85e ro with ordered data mode. Quota mode: none.
[ 12.440666] dracut: Mounted root filesystem /dev/nvme0n1p3
[ 12.462687] dracut: Switching root
[ 12.480043] kbd_mode (621) used greatest stack depth: 13072 bytes left
[ 12.484140] init-early.sh (620) used greatest stack depth: 13032 bytes left
[ 13.171956] r8169 0000:08:00.0 enp8s0: renamed from eth0
[ 13.219237] nvidia: loading out-of-tree module taints kernel.
[ 13.219244] nvidia: module license 'NVIDIA' taints kernel.
[ 13.219245] Disabling lock debugging due to kernel taint
[ 13.219247] nvidia: module license taints kernel.
[ 13.492695] nvidia-nvlink: Nvlink Core is being initialized, major device number 242
[ 13.493512] nvidia 0000:09:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=none
[ 13.698413] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 550.90.07 Fri May 31 09:35:42 UTC 2024
[ 13.714652] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 550.90.07 Fri May 31 09:30:47 UTC 2024
[ 13.716085] [drm] [nvidia-drm] [GPU ID 0x00000900] Loading driver
[ 14.504601] EXT4-fs (nvme0n1p3): re-mounted 26e58ee4-9c8f-4efd-bbb3-215df71cf85e r/w. Quota mode: none.
[ 14.509040] EXT4-fs (nvme0n1p3): re-mounted 26e58ee4-9c8f-4efd-bbb3-215df71cf85e r/w. Quota mode: none.
[ 14.568396] ext2 filesystem being mounted at /boot supports timestamps until 2038-01-19 (0x7fffffff)
[ 14.573180] EXT4-fs (nvme0n1p4): mounted filesystem 7e5930c0-30f5-493c-97c2-0c60fa048b09 r/w with ordered data mode. Quota mode: none.
[-- Attachment #3: sddm.log --]
[-- Type: text/x-log, Size: 1484 bytes --]
[13:31:18.262] (II) DAEMON: Initializing...
[13:31:18.264] (II) DAEMON: Starting...
[13:31:18.264] (II) DAEMON: Logind interface found
[13:31:18.265] (II) DAEMON: Adding new display...
[13:31:18.265] (II) DAEMON: Loaded empty theme configuration
[13:31:18.266] (II) DAEMON: Xauthority path: "/run/sddm/xauth_FIWeNk"
[13:31:18.266] (II) DAEMON: Using VT 7
[13:31:18.266] (II) DAEMON: Display server starting...
[13:31:18.266] (II) DAEMON: Writing cookie to "/run/sddm/xauth_FIWeNk"
[13:31:18.266] (II) DAEMON: Running: /usr/bin/X -nolisten tcp -background none -seat seat0 vt7 -auth /run/sddm/xauth_FIWeNk -noreset -displayfd 16
[13:31:18.760] (II) DAEMON: Setting default cursor
[13:31:18.764] (II) DAEMON: Running display setup script "/usr/share/sddm/scripts/Xsetup"
[13:31:18.765] (II) DAEMON: Display server started.
[13:31:18.765] (II) DAEMON: Socket server starting...
[13:31:18.765] (II) DAEMON: Socket server started.
[13:31:18.765] (II) DAEMON: Loaded empty theme configuration
[13:31:18.765] (II) DAEMON: Greeter starting...
[13:31:18.771] (II) HELPER: [PAM] Starting...
[13:31:18.771] (II) HELPER: [PAM] Authenticating...
[13:31:18.771] (II) HELPER: [PAM] returning.
[13:31:18.790] (II) HELPER: Writing cookie to "/tmp/xauth_AFHlro"
[13:31:18.791] (II) HELPER: Starting X11 session: "" "/usr/bin/sddm-greeter --socket /tmp/sddm-:0-QeXneb"
[13:31:18.791] (II) DAEMON: Greeter session started successfully
[13:31:18.825] (II) DAEMON: Message received from greeter: Connect
[-- Attachment #4: Xorg.0.log --]
[-- Type: text/x-log, Size: 18360 bytes --]
[ 44.035] (--) Log file renamed from "/var/log/Xorg.pid-2827.log" to "/var/log/Xorg.0.log"
[ 44.035]
X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
[ 44.035] Current Operating System: Linux Gentoo-1 6.9.4-gentoo #11 SMP PREEMPT_DYNAMIC Sat Jun 22 18:45:21 CDT 2024 x86_64
[ 44.035] Kernel command line: BOOT_IMAGE=/kernel-6.9.4-6 root=UUID=26e58ee4-9c8f-4efd-bbb3-215df71cf85e ro
[ 44.035]
[ 44.035] Current version of pixman: 0.43.4
[ 44.035] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 44.035] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 44.035] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 25 13:31:18 2024
[ 44.036] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 44.037] (==) No Layout section. Using the first Screen section.
[ 44.037] (==) No screen section available. Using defaults.
[ 44.037] (**) |-->Screen "Default Screen Section" (0)
[ 44.037] (**) | |-->Monitor "<default monitor>"
[ 44.037] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 44.037] (**) Allowing byte-swapped clients
[ 44.037] (==) Automatically adding devices
[ 44.037] (==) Automatically enabling devices
[ 44.037] (==) Automatically adding GPU devices
[ 44.037] (==) Automatically binding GPU devices
[ 44.037] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 44.037] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 44.037] Entry deleted from font path.
[ 44.038] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
[ 44.038] Entry deleted from font path.
[ 44.038] (Run 'mkfontdir' on "/usr/share/fonts/75dpi").
[ 44.038] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/100dpi
[ 44.038] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 44.038] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 44.038] (II) Module ABI versions:
[ 44.038] X.Org ANSI C Emulation: 0.4
[ 44.038] X.Org Video Driver: 25.2
[ 44.038] X.Org XInput driver : 24.4
[ 44.038] X.Org Server Extension : 10.0
[ 44.038] (++) using VT number 7
[ 44.038] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 44.038] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 44.038] (II) Platform probe for /sys/devices/pci0000:00/0000:00:03.1/0000:09:00.0/drm/card0
[ 44.166] (--) PCI:*(9@0:0:0) 10de:1cb1:10de:11bc rev 161, Mem @ 0xfb000000/16777216, 0xd0000000/268435456, 0xe0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 44.166] (II) LoadModule: "glx"
[ 44.170] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 44.173] (II) Module glx: vendor="X.Org Foundation"
[ 44.173] compiled for 1.21.1.13, module version = 1.0.0
[ 44.173] ABI class: X.Org Server Extension, version 10.0
[ 44.173] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 44.173] loading driver: nvidia
[ 44.173] (==) Matched nvidia as autoconfigured driver 0
[ 44.173] (==) Matched nouveau as autoconfigured driver 1
[ 44.173] (==) Matched nv as autoconfigured driver 2
[ 44.173] (==) Matched modesetting as autoconfigured driver 3
[ 44.173] (==) Matched fbdev as autoconfigured driver 4
[ 44.173] (==) Matched vesa as autoconfigured driver 5
[ 44.173] (==) Assigned the driver to the xf86ConfigLayout
[ 44.173] (II) LoadModule: "nvidia"
[ 44.173] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[ 44.175] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 44.175] compiled for 1.6.99.901, module version = 1.0.0
[ 44.175] Module class: X.Org Video Driver
[ 44.175] (II) LoadModule: "nouveau"
[ 44.175] (WW) Warning, couldn't open module nouveau
[ 44.175] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 44.175] (II) LoadModule: "nv"
[ 44.175] (WW) Warning, couldn't open module nv
[ 44.175] (EE) Failed to load module "nv" (module does not exist, 0)
[ 44.175] (II) LoadModule: "modesetting"
[ 44.175] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 44.177] (II) Module modesetting: vendor="X.Org Foundation"
[ 44.177] compiled for 1.21.1.13, module version = 1.21.1
[ 44.177] Module class: X.Org Video Driver
[ 44.177] ABI class: X.Org Video Driver, version 25.2
[ 44.177] (II) LoadModule: "fbdev"
[ 44.177] (WW) Warning, couldn't open module fbdev
[ 44.177] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 44.177] (II) LoadModule: "vesa"
[ 44.177] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 44.178] (II) Module vesa: vendor="X.Org Foundation"
[ 44.178] compiled for 1.21.1.13, module version = 2.6.0
[ 44.178] Module class: X.Org Video Driver
[ 44.178] ABI class: X.Org Video Driver, version 25.2
[ 44.178] (II) NVIDIA dlloader X Driver 550.90.07 Fri May 31 09:34:34 UTC 2024
[ 44.178] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 44.178] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 44.178] (II) VESA: driver for VESA chipsets: vesa
[ 44.181] (II) Loading sub module "fb"
[ 44.181] (II) LoadModule: "fb"
[ 44.181] (II) Module "fb" already built-in
[ 44.181] (II) Loading sub module "wfb"
[ 44.181] (II) LoadModule: "wfb"
[ 44.181] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[ 44.181] (II) Module wfb: vendor="X.Org Foundation"
[ 44.181] compiled for 1.21.1.13, module version = 1.0.0
[ 44.181] ABI class: X.Org ANSI C Emulation, version 0.4
[ 44.182] (WW) Falling back to old probe method for modesetting
[ 44.283] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 44.283] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 44.283] (==) NVIDIA(0): RGB weight 888
[ 44.283] (==) NVIDIA(0): Default visual is TrueColor
[ 44.283] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 44.284] (**) NVIDIA(0): Enabling 2D acceleration
[ 44.284] (II) Loading sub module "glxserver_nvidia"
[ 44.284] (II) LoadModule: "glxserver_nvidia"
[ 44.284] (II) Loading /usr/lib64/xorg/modules/extensions/libglxserver_nvidia.so
[ 44.310] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 44.310] compiled for 1.6.99.901, module version = 1.0.0
[ 44.310] Module class: X.Org Server Extension
[ 44.310] (II) NVIDIA GLX Module 550.90.07 Fri May 31 09:34:56 UTC 2024
[ 44.310] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 44.311] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:9:0:0
[ 44.311] (--) NVIDIA(0): DFP-0
[ 44.311] (--) NVIDIA(0): DFP-1
[ 44.311] (--) NVIDIA(0): DFP-2
[ 44.311] (--) NVIDIA(0): DFP-3 (boot)
[ 44.311] (--) NVIDIA(0): DFP-4
[ 44.311] (--) NVIDIA(0): DFP-5
[ 44.311] (--) NVIDIA(0): DFP-6
[ 44.311] (--) NVIDIA(0): DFP-7
[ 44.312] (II) NVIDIA(0): NVIDIA GPU Quadro P1000 (GP107GL-A) at PCI:9:0:0 (GPU-0)
[ 44.312] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 44.312] (--) NVIDIA(0): VideoBIOS: 86.07.6d.00.01
[ 44.312] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 44.312] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 44.312] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 44.312] (--) NVIDIA(GPU-0): DFP-0: 1440.0 MHz maximum pixel clock
[ 44.312] (--) NVIDIA(GPU-0):
[ 44.312] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 44.312] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 44.312] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 44.312] (--) NVIDIA(GPU-0):
[ 44.312] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 44.312] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 44.312] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[ 44.312] (--) NVIDIA(GPU-0):
[ 44.332] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 44.332] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 44.332] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 44.332] (--) NVIDIA(GPU-0):
[ 44.332] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 44.332] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[ 44.332] (--) NVIDIA(GPU-0): DFP-4: 1440.0 MHz maximum pixel clock
[ 44.332] (--) NVIDIA(GPU-0):
[ 44.332] (--) NVIDIA(GPU-0): DFP-5: disconnected
[ 44.332] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[ 44.332] (--) NVIDIA(GPU-0): DFP-5: 165.0 MHz maximum pixel clock
[ 44.332] (--) NVIDIA(GPU-0):
[ 44.332] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 44.332] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[ 44.332] (--) NVIDIA(GPU-0): DFP-6: 1440.0 MHz maximum pixel clock
[ 44.332] (--) NVIDIA(GPU-0):
[ 44.333] (--) NVIDIA(GPU-0): DFP-7: disconnected
[ 44.333] (--) NVIDIA(GPU-0): DFP-7: Internal TMDS
[ 44.333] (--) NVIDIA(GPU-0): DFP-7: 165.0 MHz maximum pixel clock
[ 44.333] (--) NVIDIA(GPU-0):
[ 44.333] (==) NVIDIA(0):
[ 44.333] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 44.333] (==) NVIDIA(0): will be used as the requested mode.
[ 44.333] (==) NVIDIA(0):
[ 44.333] (--) NVIDIA(0): No enabled display devices found; starting anyway because
[ 44.333] (--) NVIDIA(0): AllowEmptyInitialConfiguration is enabled
[ 44.333] (II) NVIDIA(0): Validated MetaModes:
[ 44.333] (II) NVIDIA(0): "NULL"
[ 44.333] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 44.333] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 44.333] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 44.333] (II) UnloadModule: "modesetting"
[ 44.333] (II) Unloading modesetting
[ 44.333] (II) UnloadModule: "vesa"
[ 44.333] (II) Unloading vesa
[ 44.333] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[ 44.333] (II) NVIDIA: access.
[ 44.336] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 44.336] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 44.336] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 44.336] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 44.336] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 44.336] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 44.336] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 44.336] (II) NVIDIA(0): Config Options in the README.
[ 44.348] (II) NVIDIA(0): Setting mode "NULL"
[ 44.389] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 44.389] (==) NVIDIA(0): Backing store enabled
[ 44.389] (==) NVIDIA(0): Silken mouse enabled
[ 44.389] (==) NVIDIA(0): DPMS enabled
[ 44.389] (II) Loading sub module "dri2"
[ 44.389] (II) LoadModule: "dri2"
[ 44.389] (II) Module "dri2" already built-in
[ 44.389] (II) NVIDIA(0): [DRI2] Setup complete
[ 44.389] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 44.389] (II) Initializing extension Generic Event Extension
[ 44.389] (II) Initializing extension SHAPE
[ 44.389] (II) Initializing extension MIT-SHM
[ 44.389] (II) Initializing extension XInputExtension
[ 44.389] (II) Initializing extension XTEST
[ 44.389] (II) Initializing extension BIG-REQUESTS
[ 44.389] (II) Initializing extension SYNC
[ 44.389] (II) Initializing extension XKEYBOARD
[ 44.389] (II) Initializing extension XC-MISC
[ 44.389] (II) Initializing extension XFIXES
[ 44.389] (II) Initializing extension RENDER
[ 44.389] (II) Initializing extension RANDR
[ 44.389] (II) Initializing extension COMPOSITE
[ 44.389] (II) Initializing extension DAMAGE
[ 44.389] (II) Initializing extension MIT-SCREEN-SAVER
[ 44.389] (II) Initializing extension DOUBLE-BUFFER
[ 44.389] (II) Initializing extension RECORD
[ 44.389] (II) Initializing extension DPMS
[ 44.389] (II) Initializing extension Present
[ 44.389] (II) Initializing extension DRI3
[ 44.389] (II) Initializing extension X-Resource
[ 44.389] (II) Initializing extension XVideo
[ 44.389] (II) Initializing extension XVideo-MotionCompensation
[ 44.389] (II) Initializing extension GLX
[ 44.389] (II) Initializing extension GLX
[ 44.389] (II) Indirect GLX disabled.
[ 44.389] (II) GLX: Another vendor is already registered for screen 0
[ 44.389] (II) Initializing extension XFree86-VidModeExtension
[ 44.389] (II) Initializing extension XFree86-DGA
[ 44.389] (II) Initializing extension XFree86-DRI
[ 44.389] (II) Initializing extension DRI2
[ 44.389] (II) Initializing extension NV-GLX
[ 44.389] (II) Initializing extension NV-CONTROL
[ 44.427] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 44.427] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 44.427] (II) LoadModule: "libinput"
[ 44.427] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[ 44.429] (II) Module libinput: vendor="X.Org Foundation"
[ 44.429] compiled for 1.21.1.13, module version = 1.4.0
[ 44.429] Module class: X.Org XInput Driver
[ 44.429] ABI class: X.Org XInput driver, version 24.4
[ 44.429] (II) Using input driver 'libinput' for 'Power Button'
[ 44.429] (**) Power Button: always reports core events
[ 44.429] (**) Option "Device" "/dev/input/event1"
[ 44.432] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 44.432] (II) event1 - Power Button: device is a keyboard
[ 44.432] (II) event1 - Power Button: device removed
[ 44.454] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 44.454] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 44.454] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 44.454] (II) event1 - Power Button: device is a keyboard
[ 44.455] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 44.455] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 44.455] (II) Using input driver 'libinput' for 'Power Button'
[ 44.455] (**) Power Button: always reports core events
[ 44.455] (**) Option "Device" "/dev/input/event0"
[ 44.455] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 44.455] (II) event0 - Power Button: device is a keyboard
[ 44.455] (II) event0 - Power Button: device removed
[ 44.471] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 44.471] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 44.471] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 44.471] (II) event0 - Power Button: device is a keyboard
[ 44.472] (II) config/udev: Adding input device DELL Dell USB Entry Keyboard (/dev/input/event3)
[ 44.472] (**) DELL Dell USB Entry Keyboard: Applying InputClass "libinput keyboard catchall"
[ 44.472] (II) Using input driver 'libinput' for 'DELL Dell USB Entry Keyboard'
[ 44.472] (**) DELL Dell USB Entry Keyboard: always reports core events
[ 44.472] (**) Option "Device" "/dev/input/event3"
[ 44.473] (II) event3 - DELL Dell USB Entry Keyboard: is tagged by udev as: Keyboard
[ 44.473] (II) event3 - DELL Dell USB Entry Keyboard: device is a keyboard
[ 44.473] (II) event3 - DELL Dell USB Entry Keyboard: device removed
[ 44.490] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-10/1-10:1.0/0003:413C:2107.0003/input/input3/event3"
[ 44.490] (II) XINPUT: Adding extended input device "DELL Dell USB Entry Keyboard" (type: KEYBOARD, id 8)
[ 44.491] (II) event3 - DELL Dell USB Entry Keyboard: is tagged by udev as: Keyboard
[ 44.491] (II) event3 - DELL Dell USB Entry Keyboard: device is a keyboard
[ 44.491] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event2)
[ 44.491] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 44.491] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse'
[ 44.491] (**) Logitech USB Optical Mouse: always reports core events
[ 44.491] (**) Option "Device" "/dev/input/event2"
[ 44.492] (II) event2 - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[ 44.492] (II) event2 - Logitech USB Optical Mouse: device is a pointer
[ 44.492] (II) event2 - Logitech USB Optical Mouse: device removed
[ 44.518] (II) libinput: Logitech USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 44.518] (II) libinput: Logitech USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 44.518] (II) libinput: Logitech USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 44.518] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-9/1-9:1.0/0003:046D:C077.0002/input/input2/event2"
[ 44.518] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9)
[ 44.518] (**) Option "AccelerationScheme" "none"
[ 44.518] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
[ 44.518] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 44.518] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 44.519] (II) event2 - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[ 44.519] (II) event2 - Logitech USB Optical Mouse: device is a pointer
[ 44.519] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 44.519] (II) No input driver specified, ignoring this device.
[ 44.519] (II) This device may have been added with another device file.
[-- Attachment #5: xorg-session.log --]
[-- Type: text/x-log, Size: 1 bytes --]
next prev parent reply other threads:[~2024-06-25 18:54 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-21 19:02 [gentoo-user] Can't get the GUI to stay up for more than a minute or so before crashing Dale
2024-06-22 11:49 ` Michael
2024-06-22 13:32 ` Jude DaShiell
2024-06-22 16:12 ` Dale
2024-06-22 18:13 ` Dale
2024-06-22 18:54 ` Dale
2024-06-22 20:04 ` Michael
2024-06-23 1:21 ` Dale
2024-06-23 9:13 ` Michael
2024-06-23 7:20 ` Wols Lists
2024-06-23 0:13 ` Mark Knecht
2024-06-23 1:30 ` Dale
2024-06-23 7:53 ` Dale
2024-06-23 9:20 ` Michael
2024-06-23 12:19 ` Dale
2024-06-23 14:22 ` Michael
2024-06-23 22:37 ` Dale
2024-06-24 0:01 ` Michael
2024-06-24 1:55 ` Dale
2024-06-24 2:53 ` William Kenworthy
2024-06-24 5:19 ` Dale
2024-06-24 9:03 ` Michael
2024-06-24 13:25 ` Dale
2024-06-24 14:29 ` Dale
2024-06-24 14:57 ` Peter Humphrey
2024-06-24 16:00 ` Michael
2024-06-24 15:38 ` Michael
2024-06-24 16:54 ` Dale
2024-06-24 17:31 ` Michael
2024-06-24 19:47 ` Dale
2024-06-24 20:43 ` Michael
2024-06-24 21:03 ` Dale
2024-06-24 21:22 ` [gentoo-user] " Grant Edwards
2024-06-24 21:52 ` Dale
2024-06-24 23:00 ` Michael
2024-06-24 23:54 ` Dale
2024-06-24 22:48 ` [gentoo-user] " Michael
2024-06-24 23:47 ` Dale
2024-06-25 9:34 ` Michael
2024-06-25 10:18 ` Dale
2024-06-24 7:15 ` Wols Lists
2024-06-24 8:38 ` Michael
2024-06-25 14:27 ` Dale
2024-06-25 16:23 ` Michael
2024-06-25 18:54 ` Dale [this message]
2024-06-25 23:23 ` Michael
2024-06-26 0:28 ` [gentoo-user] SOLVED " Dale
2024-06-26 8:30 ` Michael
2024-06-26 20:32 ` [gentoo-user] " Dale
2024-06-27 6:54 ` Dale
2024-06-27 18:27 ` Michael
2024-06-27 19:09 ` Mark Knecht
2024-06-27 21:06 ` Dale
2024-06-27 21:45 ` Michael
2024-06-27 22:52 ` Dale
2024-06-28 11:01 ` Michael
2024-06-28 21:25 ` Dale
2024-06-29 13:24 ` [gentoo-user] " Grant Edwards
2024-06-29 7:36 ` [gentoo-user] " Dale
2024-06-29 20:30 ` Dale
2024-06-29 21:12 ` Jack
2024-06-29 22:28 ` Dale
2024-06-29 22:14 ` Michael
2024-06-29 23:20 ` Mark Knecht
2024-06-30 0:24 ` Dale
2024-06-30 9:35 ` Dale
2024-06-30 9:36 ` Dale
2024-06-30 10:51 ` Michael
2024-06-30 22:56 ` Dale
2024-07-01 13:24 ` Michael
2024-07-01 13:51 ` Dale
2024-06-27 22:18 ` Mark Knecht
2024-06-27 23:01 ` Dale
2024-06-27 23:27 ` Mark Knecht
2024-06-28 5:10 ` Dale
2024-06-28 13:39 ` Mark Knecht
2024-06-28 21:40 ` Dale
2024-06-28 21:50 ` Mark Knecht
2024-06-29 3:55 ` Dale
2024-06-27 4:10 ` Dale
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=102bcce2-d430-bca3-3f4a-7d6c0bf47680@gmail.com \
--to=rdalek1967@gmail.com \
--cc=gentoo-user@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox