* [gentoo-user] x11-terms/xterm loops error upon launch
@ 2021-05-10 0:08 Vitor Hugo Nunes dos Santos
2021-05-10 13:48 ` Dr Rainer Woitok
2021-05-11 0:28 ` Vitor Hugo Nunes dos Santos
0 siblings, 2 replies; 5+ messages in thread
From: Vitor Hugo Nunes dos Santos @ 2021-05-10 0:08 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 476 bytes --]
Hi all,
I just recently setup a new desktop with Gentoo.
After the install and configuration of Xorg, I decided to 'startx' and
open xterm in fvwm.
Upon pressing the button to launch it, nothing came up. When closing
fvwm, I saw the following message being printed ad nauseam to the screen:
open ttydev: I/O error
Online searches led me to inconclusive info on what could be the cause
and fix for the issue.
I'd be glad to provide info as required.
Best regards,
vhns
[-- Attachment #2: Type: text/html, Size: 775 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [gentoo-user] x11-terms/xterm loops error upon launch
2021-05-10 0:08 [gentoo-user] x11-terms/xterm loops error upon launch Vitor Hugo Nunes dos Santos
@ 2021-05-10 13:48 ` Dr Rainer Woitok
2021-05-11 0:28 ` Vitor Hugo Nunes dos Santos
1 sibling, 0 replies; 5+ messages in thread
From: Dr Rainer Woitok @ 2021-05-10 13:48 UTC (permalink / raw
To: gentoo-user, Vitor Hugo Nunes dos Santos
Vitor,
On Sunday, 2021-05-09 21:08:15 -0300, Vitor Hugo Nunes dos Santos wrote:
> ...
> After the install and configuration of Xorg, I decided to 'startx' and
> open xterm in fvwm.
>
> Upon pressing the button to launch it, nothing came up. When closing
> fvwm, I saw the following message being printed ad nauseam to the screen:
>
> open ttydev: I/O error
No idea what's the cause, but I had success with a small script contain-
ing:
fvwm --replace &
while sleep 1 && ! ps -efu rainer | grep FvwmIconMan | grep -qv grep
do :
done
sleep 1
xterm -geometry 80x40+0+0 -xrm "*Page:0 0 0" &
This script is in turn started upon login via Xfce's "Application Auto-
start" tab of the "Settings -> Session and Startup" menu. If you don't
start "FvwmIconMan" in your "~/.fvwm/config" file, replace it in the ab-
ove "grep" command with a module you do start.
Hope that helps.
Sincerely,
Rainer
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [gentoo-user] x11-terms/xterm loops error upon launch
2021-05-10 0:08 [gentoo-user] x11-terms/xterm loops error upon launch Vitor Hugo Nunes dos Santos
2021-05-10 13:48 ` Dr Rainer Woitok
@ 2021-05-11 0:28 ` Vitor Hugo Nunes dos Santos
2021-05-11 6:56 ` Walter Dnes
2021-05-15 2:27 ` Vitor Hugo Nunes dos Santos
1 sibling, 2 replies; 5+ messages in thread
From: Vitor Hugo Nunes dos Santos @ 2021-05-11 0:28 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 7354 bytes --]
On 5/9/21 9:08 PM, Vitor Hugo Nunes dos Santos wrote:
>
> Hi all,
>
> I just recently setup a new desktop with Gentoo.
>
> After the install and configuration of Xorg, I decided to 'startx' and
> open xterm in fvwm.
>
> Upon pressing the button to launch it, nothing came up. When closing
> fvwm, I saw the following message being printed ad nauseam to the screen:
>
> open ttydev: I/O error
>
> Online searches led me to inconclusive info on what could be the cause
> and fix for the issue.
>
> I'd be glad to provide info as required.
>
> Best regards,
>
> vhns
Hi all,
I've decided to try another terminal emulator, in order to figure out
whether this was an xterm issue, an issue with my setup, or an issue
with fvwm.
Launching (or trying to, rather) x11-terms/st, gives me the following
error in dmesg:
[May10 21:17] traps: st[5846] general protection fault ip:7f92d0babff6
sp:7fffa63836a8 error:0 in libc.so[7f92d0b97000+63000]
I am not sure of what may be causing this, or how to fix it. Here
follows my emerge --info:
Portage 3.0.18 (python 3.8.9-final-0, default/linux/amd64/17.0/musl,
gcc-10.2.0, musl-1.2.2-r2, 5.10.27-gentoovhns-desktop-iommu-r3 x86_64)
=================================================================
System uname:
Linux-5.10.27-gentoovhns-desktop-iommu-r3-x86_64-AMD_Ryzen_5_2600_Six-Core_Processor-with-libc
KiB Mem: 16316940 total, 15565188 free
KiB Swap: 0 total, 0 free
Timestamp of repository gentoo: Sun, 09 May 2021 01:00:01 +0000
Head commit of repository gentoo: 2d5affeb067f6f193c0718bc5a9cc8eb8eef44d5
Head commit of repository KKona: d3d3554162168f6d994d2d8b7b239bcac56072cf
Timestamp of repository musl: Sat, 08 May 2021 23:20:00 +0000
Head commit of repository musl: 151175d3c2ebf6413a0711a4bf983b838753c25c
sh bash 5.0_p18
ld GNU ld (Gentoo 2.35.2 p1) 2.35.2
app-shells/bash: 5.0_p18::gentoo
dev-lang/perl: 5.30.3::gentoo
dev-lang/python: 3.8.9_p2::gentoo, 3.9.4_p1::gentoo
dev-util/cmake: 3.18.5::gentoo
sys-apps/baselayout: 2.7::gentoo
sys-apps/openrc: 0.42.1-r1::gentoo
sys-apps/sandbox: 2.22::gentoo
sys-devel/autoconf: 2.69-r5::gentoo
sys-devel/automake: 1.16.2-r1::gentoo
sys-devel/binutils: 2.35.2::gentoo
sys-devel/gcc: 10.2.0-r5::gentoo
sys-devel/gcc-config: 2.4::gentoo
sys-devel/libtool: 2.4.6-r6::gentoo
sys-devel/make: 4.3::gentoo
sys-kernel/linux-headers: 5.10::gentoo (virtual/os-headers)
sys-libs/musl: 1.2.2-r2::gentoo
Repositories:
gentoo
location: /var/db/repos/gentoo
sync-type: rsync
sync-uri: rsync://rsync.gentoo.org/gentoo-portage
priority: -1000
sync-rsync-verify-max-age: 24
sync-rsync-extra-opts:
sync-rsync-verify-jobs: 1
sync-rsync-verify-metamanifest: yes
KKona
location: /var/db/repos/KKona
sync-type: git
sync-uri: git://github.com/absurdsec/gentoo-overlay.git
masters: gentoo
musl
location: /var/db/repos/musl
sync-type: git
sync-uri: https://github.com/gentoo-mirror/musl.git
masters: gentoo
vhns
location: /var/db/repos/vhns
masters: gentoo
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="*"
CBUILD="x86_64-gentoo-linux-musl"
CFLAGS="-march=native -fomit-frame-pointer -O2 -pipe"
CHOST="x86_64-gentoo-linux-musl"
CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d
/etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild
/etc/sandbox.d /etc/terminfo"
CXXFLAGS="-march=native -fomit-frame-pointer -O2 -pipe"
DISTDIR="/var/cache/distfiles"
ENV_UNSET="CARGO_HOME DBUS_SESSION_BUS_ADDRESS DISPLAY GOBIN GOPATH
PERL5LIB PERL5OPT PERLPREFIX PERL_CORE PERL_MB_OPT PERL_MM_OPT
XAUTHORITY XDG_CACHE_HOME XDG_CONFIG_HOME XDG_DATA_HOME XDG_RUNTIME_DIR"
FCFLAGS="-march=native -fomit-frame-pointer -O2 -pipe"
FEATURES="assume-digests binpkg-docompress binpkg-dostrip binpkg-logs
config-protect-if-modified distlocks ebuild-locks fixlafiles ipc-sandbox
merge-sync network-sandbox news parallel-fetch pid-sandbox preserve-libs
protect-owned qa-unresolved-soname-deps sandbox sfperms strict
unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv
usersandbox usersync xattr"
FFLAGS="-march=native -fomit-frame-pointer -O2 -pipe"
GENTOO_MIRRORS="http://gentoo.c3sl.ufpr.br/"
INSTALL_MASK="charset.alias locale.alias"
LANG="C.UTF8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
MAKEOPTS="-j8"
PKGDIR="/var/cache/binpkgs"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times
--omit-dir-times --compress --force --whole-file --delete --stats
--human-readable --timeout=180 --exclude=/distfiles --exclude=/local
--exclude=/packages --exclude=/.git"
PORTAGE_TMPDIR="/var/tmp"
USE="X acl amd64 bzip2 cli crypt dri elogind iconv ipv6 libglvnd
libtirpc ncurses nls nptl openmp pam pcre readline seccomp split-usr ssl
tcpd unicode xattr zlib" ABI_X86="64" ADA_TARGET="gnat_2018"
ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci
emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0
intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci"
APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias
auth_basic authn_alias authn_anon authn_dbm authn_default authn_file
authz_dbm authz_default authz_groupfile authz_host authz_owner
authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir
disk_cache env expires ext_filter file_cache filter headers include info
log_config logio mem_cache mime mime_magic negotiation rewrite setenvif
speling status unique_id userdir usertrack vhost_alias"
CALLIGRA_FEATURES="karbon sheets words" COLLECTD_PLUGINS="df interface
irq load memory rrdtool swap syslog" CPU_FLAGS_X86="aes avx avx2 f16c
fma3 mmx mmxext pclmul popcnt rdrand sha sse sse2 sse3 sse4_1 sse4_2
sse4a ssse3" ELIBC="musl" GPSD_PROTOCOLS="ashtech aivdm earthmate
evermore fv18 garmin garmintxt gpsclock greis isync itrax mtk3301 nmea
ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf
skytraq superstar2 timing tsip tripmate tnt ublox ubx"
INPUT_DEVICES="libinput" KERNEL="linux" LCD_DEVICES="bayrad cfontz
cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text"
LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer"
LLVM_TARGETS="X86 AMDGPU" LUA_SINGLE_TARGET="lua5-1"
LUA_TARGETS="lua5-1" OFFICE_IMPLEMENTATION="libreoffice"
PHP_TARGETS="php7-3 php7-4" POSTGRES_TARGETS="postgres10 postgres11"
PYTHON_SINGLE_TARGET="python3_8" PYTHON_TARGETS="python3_8"
RUBY_TARGETS="ruby26" USERLAND="GNU" VIDEO_CARDS="amdgpu radeonsi
radeon" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options
ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq proto steal
rawnat logmark ipmark dhcpmac delude chaos account"
Unset: CC, CPPFLAGS, CTARGET, CXX, EMERGE_DEFAULT_OPTS, LC_ALL,
LINGUAS, PORTAGE_BINHOST, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS,
PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, RUSTFLAGS
I will continue with my attempts on fixing this. If I do find a fix,
I'll be sure to post. If anyone has any tips, I'd be more than thankful.
Best regards,
vhns
[-- Attachment #2: Type: text/html, Size: 9353 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [gentoo-user] x11-terms/xterm loops error upon launch
2021-05-11 0:28 ` Vitor Hugo Nunes dos Santos
@ 2021-05-11 6:56 ` Walter Dnes
2021-05-15 2:27 ` Vitor Hugo Nunes dos Santos
1 sibling, 0 replies; 5+ messages in thread
From: Walter Dnes @ 2021-05-11 6:56 UTC (permalink / raw
To: gentoo-user
I see lots of references to "musl", which I assume you're using.
I wonder if there's an incompatability somewhere there.
--
Walter Dnes <waltdnes@waltdnes.org>
I don't run "desktop environments"; I run useful applications
^ permalink raw reply [flat|nested] 5+ messages in thread
* [gentoo-user] x11-terms/xterm loops error upon launch
2021-05-11 0:28 ` Vitor Hugo Nunes dos Santos
2021-05-11 6:56 ` Walter Dnes
@ 2021-05-15 2:27 ` Vitor Hugo Nunes dos Santos
1 sibling, 0 replies; 5+ messages in thread
From: Vitor Hugo Nunes dos Santos @ 2021-05-15 2:27 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 7960 bytes --]
On 5/10/21 9:28 PM, Vitor Hugo Nunes dos Santos wrote:
> On 5/9/21 9:08 PM, Vitor Hugo Nunes dos Santos wrote:
>>
>> Hi all,
>>
>> I just recently setup a new desktop with Gentoo.
>>
>> After the install and configuration of Xorg, I decided to 'startx'
>> and open xterm in fvwm.
>>
>> Upon pressing the button to launch it, nothing came up. When closing
>> fvwm, I saw the following message being printed ad nauseam to the screen:
>>
>> open ttydev: I/O error
>>
>> Online searches led me to inconclusive info on what could be the
>> cause and fix for the issue.
>>
>> I'd be glad to provide info as required.
>>
>> Best regards,
>>
>> vhns
>
> Hi all,
>
>
> I've decided to try another terminal emulator, in order to figure out
> whether this was an xterm issue, an issue with my setup, or an issue
> with fvwm.
>
> Launching (or trying to, rather) x11-terms/st, gives me the following
> error in dmesg:
>
> [May10 21:17] traps: st[5846] general protection fault ip:7f92d0babff6
> sp:7fffa63836a8 error:0 in libc.so[7f92d0b97000+63000]
>
> I am not sure of what may be causing this, or how to fix it. Here
> follows my emerge --info:
>
> Portage 3.0.18 (python 3.8.9-final-0, default/linux/amd64/17.0/musl,
> gcc-10.2.0, musl-1.2.2-r2, 5.10.27-gentoovhns-desktop-iommu-r3 x86_64)
> =================================================================
> System uname:
> Linux-5.10.27-gentoovhns-desktop-iommu-r3-x86_64-AMD_Ryzen_5_2600_Six-Core_Processor-with-libc
> KiB Mem: 16316940 total, 15565188 free
> KiB Swap: 0 total, 0 free
> Timestamp of repository gentoo: Sun, 09 May 2021 01:00:01 +0000
> Head commit of repository gentoo: 2d5affeb067f6f193c0718bc5a9cc8eb8eef44d5
> Head commit of repository KKona: d3d3554162168f6d994d2d8b7b239bcac56072cf
>
> Timestamp of repository musl: Sat, 08 May 2021 23:20:00 +0000
> Head commit of repository musl: 151175d3c2ebf6413a0711a4bf983b838753c25c
>
> sh bash 5.0_p18
> ld GNU ld (Gentoo 2.35.2 p1) 2.35.2
> app-shells/bash: 5.0_p18::gentoo
> dev-lang/perl: 5.30.3::gentoo
> dev-lang/python: 3.8.9_p2::gentoo, 3.9.4_p1::gentoo
> dev-util/cmake: 3.18.5::gentoo
> sys-apps/baselayout: 2.7::gentoo
> sys-apps/openrc: 0.42.1-r1::gentoo
> sys-apps/sandbox: 2.22::gentoo
> sys-devel/autoconf: 2.69-r5::gentoo
> sys-devel/automake: 1.16.2-r1::gentoo
> sys-devel/binutils: 2.35.2::gentoo
> sys-devel/gcc: 10.2.0-r5::gentoo
> sys-devel/gcc-config: 2.4::gentoo
> sys-devel/libtool: 2.4.6-r6::gentoo
> sys-devel/make: 4.3::gentoo
> sys-kernel/linux-headers: 5.10::gentoo (virtual/os-headers)
> sys-libs/musl: 1.2.2-r2::gentoo
> Repositories:
>
> gentoo
> location: /var/db/repos/gentoo
> sync-type: rsync
> sync-uri: rsync://rsync.gentoo.org/gentoo-portage
> priority: -1000
> sync-rsync-verify-max-age: 24
> sync-rsync-extra-opts:
> sync-rsync-verify-jobs: 1
> sync-rsync-verify-metamanifest: yes
>
> KKona
> location: /var/db/repos/KKona
> sync-type: git
> sync-uri: git://github.com/absurdsec/gentoo-overlay.git
> masters: gentoo
>
> musl
> location: /var/db/repos/musl
> sync-type: git
> sync-uri: https://github.com/gentoo-mirror/musl.git
> masters: gentoo
>
> vhns
> location: /var/db/repos/vhns
> masters: gentoo
>
> ACCEPT_KEYWORDS="amd64"
> ACCEPT_LICENSE="*"
> CBUILD="x86_64-gentoo-linux-musl"
> CFLAGS="-march=native -fomit-frame-pointer -O2 -pipe"
> CHOST="x86_64-gentoo-linux-musl"
> CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt"
> CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d
> /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release
> /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo"
> CXXFLAGS="-march=native -fomit-frame-pointer -O2 -pipe"
> DISTDIR="/var/cache/distfiles"
> ENV_UNSET="CARGO_HOME DBUS_SESSION_BUS_ADDRESS DISPLAY GOBIN GOPATH
> PERL5LIB PERL5OPT PERLPREFIX PERL_CORE PERL_MB_OPT PERL_MM_OPT
> XAUTHORITY XDG_CACHE_HOME XDG_CONFIG_HOME XDG_DATA_HOME XDG_RUNTIME_DIR"
> FCFLAGS="-march=native -fomit-frame-pointer -O2 -pipe"
> FEATURES="assume-digests binpkg-docompress binpkg-dostrip binpkg-logs
> config-protect-if-modified distlocks ebuild-locks fixlafiles
> ipc-sandbox merge-sync network-sandbox news parallel-fetch pid-sandbox
> preserve-libs protect-owned qa-unresolved-soname-deps sandbox sfperms
> strict unknown-features-warn unmerge-logs unmerge-orphans userfetch
> userpriv usersandbox usersync xattr"
> FFLAGS="-march=native -fomit-frame-pointer -O2 -pipe"
> GENTOO_MIRRORS="http://gentoo.c3sl.ufpr.br/"
> INSTALL_MASK="charset.alias locale.alias"
> LANG="C.UTF8"
> LDFLAGS="-Wl,-O1 -Wl,--as-needed"
> MAKEOPTS="-j8"
> PKGDIR="/var/cache/binpkgs"
> PORTAGE_CONFIGROOT="/"
> PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times
> --omit-dir-times --compress --force --whole-file --delete --stats
> --human-readable --timeout=180 --exclude=/distfiles --exclude=/local
> --exclude=/packages --exclude=/.git"
> PORTAGE_TMPDIR="/var/tmp"
> USE="X acl amd64 bzip2 cli crypt dri elogind iconv ipv6 libglvnd
> libtirpc ncurses nls nptl openmp pam pcre readline seccomp split-usr
> ssl tcpd unicode xattr zlib" ABI_X86="64" ADA_TARGET="gnat_2018"
> ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci
> emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0
> intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci"
> APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions
> alias auth_basic authn_alias authn_anon authn_dbm authn_default
> authn_file authz_dbm authz_default authz_groupfile authz_host
> authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock
> deflate dir disk_cache env expires ext_filter file_cache filter
> headers include info log_config logio mem_cache mime mime_magic
> negotiation rewrite setenvif speling status unique_id userdir
> usertrack vhost_alias" CALLIGRA_FEATURES="karbon sheets words"
> COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog"
> CPU_FLAGS_X86="aes avx avx2 f16c fma3 mmx mmxext pclmul popcnt rdrand
> sha sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3" ELIBC="musl"
> GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt
> gpsclock greis isync itrax mtk3301 nmea ntrip navcom oceanserver
> oldstyle oncore rtcm104v2 rtcm104v3 sirf skytraq superstar2 timing
> tsip tripmate tnt ublox ubx" INPUT_DEVICES="libinput" KERNEL="linux"
> LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb
> ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console
> presenter-minimizer" LLVM_TARGETS="X86 AMDGPU"
> LUA_SINGLE_TARGET="lua5-1" LUA_TARGETS="lua5-1"
> OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php7-3 php7-4"
> POSTGRES_TARGETS="postgres10 postgres11"
> PYTHON_SINGLE_TARGET="python3_8" PYTHON_TARGETS="python3_8"
> RUBY_TARGETS="ruby26" USERLAND="GNU" VIDEO_CARDS="amdgpu radeonsi
> radeon" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options
> ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq proto steal
> rawnat logmark ipmark dhcpmac delude chaos account"
> Unset: CC, CPPFLAGS, CTARGET, CXX, EMERGE_DEFAULT_OPTS, LC_ALL,
> LINGUAS, PORTAGE_BINHOST, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS,
> PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, RUSTFLAGS
>
> I will continue with my attempts on fixing this. If I do find a fix,
> I'll be sure to post. If anyone has any tips, I'd be more than thankful.
>
> Best regards,
>
> vhns
>
Ok, the "segfault" errors were due to a faulty stick. Now replaced. I
rebuilt every package in the system. I no longer get segfaults. But I
still get the same message in xterm and st throws no errors but just
like xterm it doesn't open.
[-- Attachment #2: Type: text/html, Size: 10368 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-05-15 2:27 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-05-10 0:08 [gentoo-user] x11-terms/xterm loops error upon launch Vitor Hugo Nunes dos Santos
2021-05-10 13:48 ` Dr Rainer Woitok
2021-05-11 0:28 ` Vitor Hugo Nunes dos Santos
2021-05-11 6:56 ` Walter Dnes
2021-05-15 2:27 ` Vitor Hugo Nunes dos Santos
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox