Re: RE: RE: [gentoo-user] alsa config - help

Re: RE: RE: [gentoo-user] alsa config - help

[Michael Kintzios]

[-- Attachment #1: Type: text/plain, Size: 359 bytes --]

> From:: "John Dangler" <jdangler@atlantic.net>
> To: gentoo-user@lists.gentoo.org
> Subject: RE: RE: [gentoo-user] alsa config - help
> Date: Sat, 20 Aug 2005 16:59:46 -0400

> My .config has -
> CONFIG_SND_INTEL8X0=m

and lsmod shows it as loaded, right?
-- 
Regards,
Mick

Lycos email has now 300 Megabytes of free storage... Get it now at mail.lycos.co.uk

RE: RE: RE: [gentoo-user] alsa config - help

[John Dangler]

Mike~
As a matter of fact, no.  all the other snd_ modules show, but not intel8x0

Thanks for the assistance.  This is beginning to give me a slight
headache...

John D



-----Original Message-----
From: Michael Kintzios [mailto:michaelkintzios@lycos.co.uk] 
Sent: Saturday, August 20, 2005 6:44 PM
To: gentoo-user@lists.gentoo.org
Subject: Re: RE: RE: [gentoo-user] alsa config - help

> From:: "John Dangler" <jdangler@atlantic.net>
> To: gentoo-user@lists.gentoo.org
> Subject: RE: RE: [gentoo-user] alsa config - help
> Date: Sat, 20 Aug 2005 16:59:46 -0400

> My .config has -
> CONFIG_SND_INTEL8X0=m

and lsmod shows it as loaded, right?
-- 
Regards,
Mick

Lycos email has now 300 Megabytes of free storage... Get it now at
mail.lycos.co.uk


-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] alsa config - help

[Joe Menola]

On Saturday August 20 2005 6:13 pm, John Dangler wrote:
> Mike~
> As a matter of fact, no.  all the other snd_ modules show, but not intel8x0
>
> Thanks for the assistance.  This is beginning to give me a slight
> headache...

You will still need alsa-drivers if you have built snd_intel8x0 as a module. 
You just need to get the module installed, that's my story and I'm sticking 
to it. :)
I would try running "make && make modules_install" from your kernel sources 
directory. Then try modprobe snd_intel8x0 again. If that turns up ok, run 
alsaconf again and you should be all set.

-jm

-- 
gentoo-user@gentoo.org mailing list

Re: RE: RE: [gentoo-user] alsa config - help

[Michael Kintzios]

[-- Attachment #1: Type: text/plain, Size: 1034 bytes --]

 
> From:: "John Dangler" <jdangler@atlantic.net>
> To: gentoo-user@lists.gentoo.org
> Subject: RE: RE: [gentoo-user] alsa config - help
> Date: Sat, 20 Aug 2005 19:17:36 -0400

> Nick~
> I found an instance of the module here - 
> /lib/modules/2.6.12-gentoo-r9/alsa-driver/pci/snd-intel8x0.ko
> Curiously enough, there is also this file located here - 
> /lib/modules/2.6.12-gentoo-r9/alsa-driver/pci/ac97/snd-ac97-codec.ko
> 
> lspci shows the multimedia controller as Intel AC'97 ...

It seems that intel8x0 is your driver: http://www.alsa-project.org/alsa-doc/doc-php/template.php?company=Intel&card=.&chip=440MX%2C+i810%2C+i810%2C+i810E%2C+i820%2C+i820&module=intel8x0

Remove the module (which does not appear to have been installed, or loaded) reconfigure your kernel and built it in (not as a module), reboot and see what dmesg gives you.  If you follow carefully the alsa guide you 'should' get there.
-- 
Regards,
Mick

Lycos email has now 300 Megabytes of free storage... Get it now at mail.lycos.co.uk