RE: [gentoo-user] unable to emerge anything...

["Richard Torres" <rtorres827@yahoo.com>]

[-- Attachment #1: Type: text/plain, Size: 4559 bytes --]

Thanks for the input. 

I tried it on both of my Gentoo boxes. One worked and the problematic one
gave me the following output;

# gcc test.c -o test

gcc: installation problem, cannot exec `as': No such file or directory

 

I'm going to try quickpkg again but this time from the working box. The
first pkg came from an older livecd.

 

If you think of anything please let me know. Thanks again.

 

-Richard

 

  _____  

From: James Ausmus [mailto:james.ausmus@gmail.com] 
Sent: Wednesday, January 09, 2008 12:22 PM
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] unable to emerge anything...

 

 

On Jan 9, 2008 9:13 AM, Richard Torres <rtorres827@yahoo.com> wrote:

It's all a blur. It was trying to re-emerge something related to gcc and
python was blocking it so I unmerged it.
I've got python back using quickpkg like you suggested. Now I'm working on
getting gcc to work. I did a quickpkg on gcc but emerge still fails with a 
'C compiler cannot create executables' error.
I'm pretty sure I'm using a working version.


It may not be the C compiler at all. To check this copy the following code
into a file called test.c:



#include <stdio.h>

int main(void)
{
  printf("Hello World!\n");
  return 0;
}


And then run the following commands:

gcc test.c -o test
./test

If you see a Hello World! output, then your C compiler is working fine. If
this is the case, then you need to do as the original error message
specifies - check the config.log file. It should be located at
/var/tmp/portage/dev-lang/php- 5.2.5-r1/work/php-5.2.5/config.log

config.log files can be a little confusing to read through if you're not
used to them, but you'll just want to start at the bottom and work your way
up, until you find any error messages - or, you can post your config.log
file, and someone can help you out with it.

HTH-

James




 

 


gcc-config -l
 [1] i686-pc-linux-gnu-3.3.4

 [2] i686-pc-linux-gnu-3.4.4 *
 [3] i686-pc-linux-gnu-3.4.4-hardened
 [4] i686-pc-linux-gnu-3.4.4-hardenednopie
 [5] i686-pc-linux-gnu-3.4.4-hardenednopiessp 
 [6] i686-pc-linux-gnu-3.4.4-hardenednossp

Thanks-a-bunch


-----Original Message-----
From: Alan McKinnon [mailto:alan.mckinnon@gmail.com ]
Sent: Sunday, January 06, 2008 1:51 AM
To: gentoo-user@lists.gentoo.org

Subject: Re: [gentoo-user] unable to emerge anything... 

On Saturday 05 January 2008, Richard Torres wrote:
> Alan,
> Thanks for that. It's funny you should mention python, I just
> inadvertently unmerged it (doh...). I've got another gentoo box 
> running a newer version of gcc and a newer kernel. Do you think I can
> get what I need out of it?

Yes, you should be able to use that. Python is SLOTted, so even if your
other box is using a different SLOT, you can emerge the version you 
need, quickpkg it, copy it over to the first machine and unpack it
there.

quickpkg's are just tarballs so you can even use good old tar and
bunzip2 if you managed to go to the next step of dohness and unmerge 
portage as well :-)

btw, how did you manage to unmerge python? That's in system and portage
usually goes to great lengths to prevent you doing just that

alan


>
> Thanks for your help, 
> -Richard
>
> ----- Original Message ----
> From: Alan McKinnon <alan.mckinnon@gmail.com>
> To: gentoo-user@lists.gentoo.org
> Sent: Saturday, January 5, 2008 2:25:52 AM
> Subject: Re: [gentoo-user] unable to emerge anything...
>
> On Saturday 05 January 2008, Richard Torres wrote:
> > I'm getting pretty much the same error (C compiler cannot create 
> > executables). I'm pretty sure it's because gcc-3.3.4 is installed.
> > I've tried upgrading gcc by emerging but get the same error
> > (catch-22 situation). Here's the last part of the error log which 
> > is the same with anything I try to emerge.
>
> A quickpkg of gcc might help you out of this, it's about 7M or so so
> small enough to mail to you. Perhaps some kind soul here with similar 
> settings to you can send their tbz2 of gcc-3.3.6.x
>
> Alternatively, you might be able to unpack a working gcc tarball from
> a
>
> stage 3 onto your system and use that
>
> It doesn't help you right now, but I've managed to screw up enough
> gentoo systems enough times that I now keep quickpkg copies of known
> good working critical packages in $PKGDIR - minimally gcc, glibc, 
> python, portage, tar and a shell
>
> alan
>
> --
> Alan McKinnon
> alan dot mckinnon at gmail dot com



--
Alan McKinnon
alan dot mckinnon at gmail dot com
--
gentoo-user@lists.gentoo.org mailing list

--
gentoo-user@lists.gentoo.org mailing list

 


[-- Attachment #2: Type: text/html, Size: 11168 bytes --]