[gentoo-user-ru] Т.к. недавно с *NIX-системами, то не могу понять....

[gentoo-user-ru] Т.к. недавно с *NIX-системами, то не могу понять....

[Vladimir Dmitrichenkov]

поставил Gentoo себе на бук (Gentoo 2005.0 NixP Edition),..все было 
хорошо...(вопрос чисто по сетке).. все работало, но через какое-то время 
DHCPCD стал выдавать ошибку при загрузке:

dhcpcd[10974]: dhcpStart: interface eth0 is not Ethernet or 802.2 Token Ring

следовательно, сетки - ноль,... счастье -- в полном дауне......
 Помогите советом,... пинки в сторону инета приветствуются......

-- 
Vladimir Dmitrichenkov
CJSB "Surgutneftegasbank"
19, Kukuevitsky Str.
628400,Surgut,Khanty-Mansy region,Russia
Email :  wan@sngb.ru
Phone :  +7 (3462) 39-85-09
	 +7-922-250-50-57


-- 
gentoo-user-ru@gentoo.org mailing list

[gentoo-user-ru] Re: [gentoo-user-ru] Т.к. недавно с *NIX-системами, то не могу понять....

[Antonio]

# cat /etc/conf.d/net

в студию!

--
Best Regards,
Antonio

-- 
gentoo-user-ru@gentoo.org mailing list

Re: [gentoo-user-ru] Т.к. недавно с *NIX-системами, то не могу понять....

[inhomos]

On 10:58 Thu 27 Oct     , Vladimir Dmitrichenkov wrote:
> 
> поставил Gentoo себе на бук (Gentoo 2005.0 NixP Edition),..все было 
> хорошо...(вопрос чисто по сетке).. все работало, но через какое-то время DHCPCD 
> стал выдавать ошибку при загрузке:
> 
> dhcpcd[10974]: dhcpStart: interface eth0 is not Ethernet or 802.2 Token Ring
> 
> следовательно, сетки - ноль,... счастье -- в полном дауне......
>  Помогите советом,... пинки в сторону инета приветствуются......
> 

С драйвером ничего не происходило ? Можно увидеть вывод dmesg и что падает в /var/log/messages ?
-- 
gentoo-user-ru@gentoo.org mailing list

Re: [gentoo-user-ru] Re: [gentoo-user-ru] Т.к. недавно с *NIX-системами, то не могу понять....

[Vladimir Dmitrichenkov]

Antonio said the following on 27.10.2005 11:00:

># cat /etc/conf.d/net
>
>в студию!
>  
>
iface_eth0="dhcp"
dhcpcd_eth0="-HD"

-- 
Vladimir Dmitrichenkov
CJSB "Surgutneftegasbank"
19, Kukuevitsky Str.
628400,Surgut,Khanty-Mansy region,Russia
Email :  wan@sngb.ru
Phone :  +7 (3462) 39-85-09
	 +7-922-250-50-57


-- 
gentoo-user-ru@gentoo.org mailing list

Re: [gentoo-user-ru] Т.к. недавно с *NIX-системами, то не могу понять....

[Vladimir Dmitrichenkov]

inhomos said the following on 27.10.2005 11:14:

>On 10:58 Thu 27 Oct
>С драйвером ничего не происходило ? Можно увидеть вывод dmesg
>
конечно можно:
Linux version 2.6.11-gentoo-r11 (root@tux) (gcc version 3.3.5 (Gentoo 
Linux 3.3.5-r1, ssp-3.3.2-3, pie-8.7.7.1)) #1 SMP Thu Oct 27 09:53:36 
YEKST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000df70000 (usable)
 BIOS-e820: 000000000df70000 - 000000000df7b000 (ACPI data)
 BIOS-e820: 000000000df7b000 - 000000000df80000 (ACPI NVS)
 BIOS-e820: 000000000df80000 - 000000000e000000 (reserved)
 BIOS-e820: 000000001df80000 - 000000001e000000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
223MB LOWMEM available.
On node 0 totalpages: 57200
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 53104 pages, LIFO batch:12
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f7070
ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x0df76202
ACPI: FADT (v001 QUANTA RS200M   0x06040000 ET8  0x000f4240) @ 0x0df7af8c
ACPI: DSDT (v001 QUANTA      ET8 0x06040000 MSFT 0x0100000e) @ 0x00000000
Allocating PCI resources starting at 1e000000 (gap: 1e000000:e1f80000)
Built 1 zonelists
Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 
real_root=/dev/hda3 udev vga=0x317 splash=verbose
fbsplash: verbose
__iounmap: bad address c00fffd9
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01200000)
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 1794.262 MHz processor.
Using tsc for high-res timesource
Speakup v-2.00 CVS: Wed Mar 2 20:22:02 EST 2005 : initialized
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 220776k/228800k available (2238k kernel code, 7432k reserved, 
613k data, 196k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3530.75 BogoMIPS (lpj=1765376)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Couldn't initialize miscdevice /dev/synth.
CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 
00000400 00000000 00000000
CPU: After vendor identify, caps: bfebf9ff 00000000 00000000 00000000 
00000400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: bfebf9ff 00000000 00000000 00000080 00000400 
00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0420)
CPU0: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz stepping 07
per-CPU timeslice cutoff: 1462.89 usecs.
task migration cache decay timeout: 2 msecs.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
CPU0 attaching sched-domain:
 domain 0: span 01
  groups: 01
  domain 1: span 01
   groups: 01
checking if image is initramfs...it isn't (no cpio magic); looks like an 
initrd
Freeing initrd memory: 1836k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfd87e, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNK0] (IRQs *10)
ACPI: PCI Interrupt Link [LNK1] (IRQs *10)
ACPI: PCI Interrupt Link [LNK2] (IRQs *10)
ACPI: PCI Interrupt Link [LNK3] (IRQs *10)
ACPI: PCI Interrupt Link [LNK4] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs *5)
ACPI: PCI Interrupt Link [LNK7] (IRQs *5)
ACPI: PCI Interrupt Link [LNK8] (IRQs *10)
ACPI: Embedded Controller [EC0] (gpe 24)
ACPI: Power Resource [PFNL] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically.  If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device().  As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior.  If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
pnp: 00:06: ioport range 0x40b-0x40b has been reserved
pnp: 00:06: ioport range 0x480-0x48f has been reserved
pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:06: ioport range 0x4d6-0x4d6 has been reserved
pnp: 00:06: ioport range 0x8000-0x807f could not be reserved
inotify device minor=63
Squashfs 2.1 (released 2004/12/10) (C) 2002-2004 Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, large block numbers, 
no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
Activating ISA DMA hang workarounds.
vesafb: framebuffer at 0xf8000000, mapped to 0xce880000, using 3072k, 
total 32704k
vesafb: mode is 1024x768x16, linelength=2048, pages=20
vesafb: protected mode interface info at c000:5103
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt Link [LNK6] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 5 (level, low) -> IRQ 5
ttyS47 at I/O 0x8428 (irq = 5) is a 8250
ttyS2 at I/O 0x8440 (irq = 5) is a 8250
ttyS3 at I/O 0x8450 (irq = 5) is a 8250
ttyS4 at I/O 0x8460 (irq = 5) is a 8250
ttyS5 at I/O 0x8470 (irq = 5) is a 8250
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
Synaptics Touchpad, model: 1
 Firmware: 5.9
 Sensor: 27
 new absolute packet format
 Touchpad has extended capability bits
 -> four buttons
 -> multifinger detection
 -> palm detection
 -> pass-through port
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
serio: Synaptics pass-through port at isa0060/serio1/input0
io scheduler noop registered
io scheduler deadline registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller at PCI slot 0000:00:10.0
ACPI: PCI interrupt 0000:00:10.0[A]: no GSI - using IRQ 0
ALI15X3: chipset revision 196
ALI15X3: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x9020-0x9027, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x9028-0x902f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: TOSHIBA MK3021GAS, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: QSI CD-RW/DVD-ROM SBW-242, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 58605120 sectors (30005 MB), CHS=58140/16/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 hda3
hdc: ATAPI 4X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
CAPI Subsystem Rev 1.1.2.8
EISA: Probing bus 0 at eisa0
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 196k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v2.2
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LNK8] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: irq 10, pci mem 0xf0004000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
sl811: driver sl811-hcd, 15 Dec 2004
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 10 (level, low) -> IRQ 10
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  
MMIO=[f0007000-f00077ff]  Max Packet=[2048]
sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
libata version 1.10 loaded.
ReiserFS: hda3: warning: sh-2021: reiserfs_fill_super: can not find 
reiserfs on hda3
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00c09f00000841c2]
eth1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
Adding 541792k swap on /dev/hda2.  Priority:-1 extents:1
EXT3 FS on hda3, internal journal
Real Time Clock Driver v1.12
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xef
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03b0160(lo)
IPv6 over IPv4 tunneling driver
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 10 (level, low) -> IRQ 10
Yenta: CardBus bridge found at 0000:00:0a.0 [152d:0705]
Yenta: ISA IRQ mask 0x0000, PCI irq 10
Socket status: 30000006
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0x100-0x4ff: excluding 0x200-0x207 0x378-0x37f
cs: IO port probe 0xa00-0xaff: clean.
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077

> и что падает в /var/log/messages ?
>  
>
вот это:
Oct 27 10:19:06 tux syslog-ng[10697]: syslog-ng version 1.6.7 starting
Oct 27 10:19:06 tux syslog-ng[10697]: Changing permissions on special 
file /dev/tty12
Oct 27 10:19:06 tux Linux version 2.6.11-gentoo-r11 (root@tux) (gcc 
version 3.3.5 (Gentoo Linux 3.3.5-r1, ssp-3.3.2-3, pie-8.7.7.1)) #1 SMP 
Thu Oct 27 09:53:36 YEKST 2005
Oct 27 10:19:06 tux BIOS-provided physical RAM map:
Oct 27 10:19:06 tux BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Oct 27 10:19:06 tux BIOS-e820: 000000000009f800 - 00000000000a0000 
(reserved)
Oct 27 10:19:06 tux BIOS-e820: 00000000000dc000 - 00000000000e0000 
(reserved)
Oct 27 10:19:06 tux BIOS-e820: 00000000000e4000 - 0000000000100000 
(reserved)
Oct 27 10:19:06 tux BIOS-e820: 0000000000100000 - 000000000df70000 (usable)
Oct 27 10:19:06 tux BIOS-e820: 000000000df70000 - 000000000df7b000 (ACPI 
data)
Oct 27 10:19:06 tux BIOS-e820: 000000000df7b000 - 000000000df80000 (ACPI 
NVS)
Oct 27 10:19:06 tux BIOS-e820: 000000000df80000 - 000000000e000000 
(reserved)
Oct 27 10:19:06 tux BIOS-e820: 000000001df80000 - 000000001e000000 
(reserved)
Oct 27 10:19:06 tux BIOS-e820: 00000000fff80000 - 0000000100000000 
(reserved)
Oct 27 10:19:06 tux 0MB HIGHMEM available.
Oct 27 10:19:06 tux 223MB LOWMEM available.
Oct 27 10:19:06 tux On node 0 totalpages: 57200
Oct 27 10:19:06 tux DMA zone: 4096 pages, LIFO batch:1
Oct 27 10:19:06 tux Normal zone: 53104 pages, LIFO batch:12
Oct 27 10:19:06 tux HighMem zone: 0 pages, LIFO batch:1
Oct 27 10:19:06 tux DMI 2.3 present.
Oct 27 10:19:06 tux ACPI: RSDP (v000 
PTLTD                                 ) @ 0x000f7070
Oct 27 10:19:06 tux ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 
0x00000000) @ 0x0df76202
Oct 27 10:19:06 tux ACPI: FADT (v001 QUANTA RS200M   0x06040000 ET8  
0x000f4240) @ 0x0df7af8c
Oct 27 10:19:06 tux ACPI: DSDT (v001 QUANTA      ET8 0x06040000 MSFT 
0x0100000e) @ 0x00000000
Oct 27 10:19:06 tux Allocating PCI resources starting at 1e000000 (gap: 
1e000000:e1f80000)
Oct 27 10:19:06 tux Built 1 zonelists
Oct 27 10:19:06 tux Kernel command line: root=/dev/ram0 init=/linuxrc 
ramdisk=8192 real_root=/dev/hda3 udev vga=0x317 splash=verbose
Oct 27 10:19:06 tux fbsplash: verbose
Oct 27 10:19:06 tux __iounmap: bad address c00fffd9
Oct 27 10:19:06 tux Local APIC disabled by BIOS -- you can enable it 
with "lapic"
Oct 27 10:19:06 tux mapped APIC to ffffd000 (01200000)
Oct 27 10:19:06 tux Initializing CPU#0
Oct 27 10:19:06 tux PID hash table entries: 1024 (order: 10, 16384 bytes)
Oct 27 10:19:06 tux Detected 1794.262 MHz processor.
Oct 27 10:19:06 tux Using tsc for high-res timesource
Oct 27 10:19:06 tux Speakup v-2.00 CVS: Wed Mar 2 20:22:02 EST 2005 : 
initialized
Oct 27 10:19:06 tux Console: colour dummy device 80x25
Oct 27 10:19:06 tux Dentry cache hash table entries: 32768 (order: 5, 
131072 bytes)
Oct 27 10:19:06 tux Inode-cache hash table entries: 16384 (order: 4, 
65536 bytes)
Oct 27 10:19:06 tux Memory: 220776k/228800k available (2238k kernel 
code, 7432k reserved, 613k data, 196k init, 0k highmem)
Oct 27 10:19:06 tux Checking if this processor honours the WP bit even 
in supervisor mode... Ok.
Oct 27 10:19:06 tux Calibrating delay loop... 3530.75 BogoMIPS (lpj=1765376)
Oct 27 10:19:06 tux Mount-cache hash table entries: 512 (order: 0, 4096 
bytes)
Oct 27 10:19:06 tux Couldn't initialize miscdevice /dev/synth.
Oct 27 10:19:06 tux CPU: After generic identify, caps: bfebf9ff 00000000 
00000000 00000000 00000400 00000000 00000000
Oct 27 10:19:06 tux CPU: After vendor identify, caps: bfebf9ff 00000000 
00000000 00000000 00000400 00000000 00000000
Oct 27 10:19:06 tux CPU: Trace cache: 12K uops, L1 D cache: 8K
Oct 27 10:19:06 tux CPU: L2 cache: 512K
Oct 27 10:19:06 tux CPU: Hyper-Threading is disabled
Oct 27 10:19:06 tux CPU: After all inits, caps: bfebf9ff 00000000 
00000000 00000080 00000400 00000000 00000000
Oct 27 10:19:06 tux Enabling fast FPU save and restore... done.
Oct 27 10:19:06 tux Enabling unmasked SIMD FPU exception support... done.
Oct 27 10:19:06 tux Checking 'hlt' instruction... OK.
Oct 27 10:19:06 tux ACPI: setting ELCR to 0200 (from 0420)
Oct 27 10:19:06 tux CPU0: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 
1.80GHz stepping 07
Oct 27 10:19:06 tux per-CPU timeslice cutoff: 1462.89 usecs.
Oct 27 10:19:06 tux task migration cache decay timeout: 2 msecs.
Oct 27 10:19:06 tux SMP motherboard not detected.
Oct 27 10:19:06 tux Local APIC not detected. Using dummy APIC emulation.
Oct 27 10:19:06 tux Brought up 1 CPUs
Oct 27 10:19:06 tux CPU0 attaching sched-domain:
Oct 27 10:19:06 tux domain 0: span 01
Oct 27 10:19:06 tux groups: 01
Oct 27 10:19:06 tux domain 1: span 01
Oct 27 10:19:06 tux groups: 01
Oct 27 10:19:06 tux checking if image is initramfs...it isn't (no cpio 
magic); looks like an initrd
Oct 27 10:19:06 tux Freeing initrd memory: 1836k freed
Oct 27 10:19:06 tux NET: Registered protocol family 16
Oct 27 10:19:06 tux EISA bus registered
Oct 27 10:19:06 tux PCI: PCI BIOS revision 2.10 entry at 0xfd87e, last bus=1
Oct 27 10:19:06 tux PCI: Using configuration type 1
Oct 27 10:19:06 tux mtrr: v2.0 (20020519)
Oct 27 10:19:06 tux ACPI: Subsystem revision 20050211
Oct 27 10:19:06 tux ACPI: Interpreter enabled
Oct 27 10:19:06 tux ACPI: Using PIC for interrupt routing
Oct 27 10:19:06 tux ACPI: PCI Root Bridge [PCI0] (00:00)
Oct 27 10:19:06 tux PCI: Probing PCI hardware (bus 00)
Oct 27 10:19:06 tux ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Oct 27 10:19:06 tux ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
Oct 27 10:19:06 tux ACPI: PCI Interrupt Link [LNK0] (IRQs *10)
Oct 27 10:19:06 tux ACPI: PCI Interrupt Link [LNK1] (IRQs *10)
Oct 27 10:19:06 tux ACPI: PCI Interrupt Link [LNK2] (IRQs *10)
Oct 27 10:19:06 tux ACPI: PCI Interrupt Link [LNK3] (IRQs *10)
Oct 27 10:19:06 tux ACPI: PCI Interrupt Link [LNK4] (IRQs 10) *0, disabled.
Oct 27 10:19:06 tux ACPI: PCI Interrupt Link [LNK6] (IRQs *5)
Oct 27 10:19:06 tux ACPI: PCI Interrupt Link [LNK7] (IRQs *5)
Oct 27 10:19:06 tux ACPI: PCI Interrupt Link [LNK8] (IRQs *10)
Oct 27 10:19:06 tux ACPI: Embedded Controller [EC0] (gpe 24)
Oct 27 10:19:06 tux ACPI: Power Resource [PFNL] (off)
Oct 27 10:19:06 tux Linux Plug and Play Support v0.97 (c) Adam Belay
Oct 27 10:19:06 tux pnp: PnP ACPI init
Oct 27 10:19:06 tux pnp: PnP ACPI: found 13 devices
Oct 27 10:19:06 tux SCSI subsystem initialized
Oct 27 10:19:06 tux PCI: Using ACPI for IRQ routing
Oct 27 10:19:06 tux ** PCI interrupts are no longer routed 
automatically.  If this
Oct 27 10:19:06 tux ** causes a device to stop working, it is probably 
because the
Oct 27 10:19:06 tux ** driver failed to call pci_enable_device().  As a 
temporary
Oct 27 10:19:06 tux ** workaround, the "pci=routeirq" argument restores 
the old
Oct 27 10:19:06 tux ** behavior.  If this argument makes the device work 
again,
Oct 27 10:19:06 tux ** please email the output of "lspci" to 
bjorn.helgaas@hp.com
Oct 27 10:19:06 tux ** so I can fix the driver.
Oct 27 10:19:06 tux pnp: 00:06: ioport range 0x40b-0x40b has been reserved
Oct 27 10:19:06 tux pnp: 00:06: ioport range 0x480-0x48f has been reserved
Oct 27 10:19:06 tux pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved
Oct 27 10:19:06 tux pnp: 00:06: ioport range 0x4d6-0x4d6 has been reserved
Oct 27 10:19:06 tux pnp: 00:06: ioport range 0x8000-0x807f could not be 
reserved
Oct 27 10:19:06 tux inotify device minor=63
Oct 27 10:19:06 tux Squashfs 2.1 (released 2004/12/10) (C) 2002-2004 
Phillip Lougher
Oct 27 10:19:06 tux SGI XFS with ACLs, security attributes, realtime, 
large block numbers, no debug enabled
Oct 27 10:19:06 tux SGI XFS Quota Management subsystem
Oct 27 10:19:06 tux Initializing Cryptographic API
Oct 27 10:19:06 tux Activating ISA DMA hang workarounds.
Oct 27 10:19:06 tux vesafb: framebuffer at 0xf8000000, mapped to 
0xce880000, using 3072k, total 32704k
Oct 27 10:19:06 tux vesafb: mode is 1024x768x16, linelength=2048, pages=20
Oct 27 10:19:06 tux vesafb: protected mode interface info at c000:5103
Oct 27 10:19:06 tux vesafb: scrolling: redraw
Oct 27 10:19:06 tux vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Oct 27 10:19:06 tux Console: switching to colour frame buffer device 128x48
Oct 27 10:19:06 tux fb0: VESA VGA frame buffer device
Oct 27 10:19:06 tux isapnp: Scanning for PnP cards...
Oct 27 10:19:06 tux isapnp: No Plug & Play device found
Oct 27 10:19:06 tux serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 27 10:19:06 tux serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 27 10:19:06 tux Serial: 8250/16550 driver $Revision: 1.90 $ 48 
ports, IRQ sharing enabled
Oct 27 10:19:06 tux ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 27 10:19:06 tux ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Oct 27 10:19:06 tux ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 27 10:19:06 tux ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 27 10:19:06 tux ACPI: PCI Interrupt Link [LNK6] enabled at IRQ 5
Oct 27 10:19:06 tux PCI: setting IRQ 5 as level-triggered
Oct 27 10:19:06 tux ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 5 (level, 
low) -> IRQ 5
Oct 27 10:19:06 tux ttyS47 at I/O 0x8428 (irq = 5) is a 8250
Oct 27 10:19:06 tux ttyS2 at I/O 0x8440 (irq = 5) is a 8250
Oct 27 10:19:06 tux ttyS3 at I/O 0x8450 (irq = 5) is a 8250
Oct 27 10:19:06 tux ttyS4 at I/O 0x8460 (irq = 5) is a 8250
Oct 27 10:19:06 tux ttyS5 at I/O 0x8470 (irq = 5) is a 8250
Oct 27 10:19:06 tux mice: PS/2 mouse device common for all mice
Oct 27 10:19:06 tux input: AT Translated Set 2 keyboard on isa0060/serio0
Oct 27 10:19:06 tux Synaptics Touchpad, model: 1
Oct 27 10:19:06 tux Firmware: 5.9
Oct 27 10:19:06 tux Sensor: 27
Oct 27 10:19:06 tux new absolute packet format
Oct 27 10:19:06 tux Touchpad has extended capability bits
Oct 27 10:19:06 tux -> four buttons
Oct 27 10:19:06 tux -> multifinger detection
Oct 27 10:19:06 tux -> palm detection
Oct 27 10:19:06 tux -> pass-through port
Oct 27 10:19:06 tux input: SynPS/2 Synaptics TouchPad on isa0060/serio1
Oct 27 10:19:06 tux serio: Synaptics pass-through port at 
isa0060/serio1/input0
Oct 27 10:19:06 tux io scheduler noop registered
Oct 27 10:19:06 tux io scheduler deadline registered
Oct 27 10:19:06 tux RAMDISK driver initialized: 16 RAM disks of 8192K 
size 1024 blocksize
Oct 27 10:19:06 tux loop: loaded (max 8 devices)
Oct 27 10:19:06 tux Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Oct 27 10:19:06 tux ide: Assuming 33MHz system bus speed for PIO modes; 
override with idebus=xx
Oct 27 10:19:06 tux ALI15X3: IDE controller at PCI slot 0000:00:10.0
Oct 27 10:19:06 tux ACPI: PCI interrupt 0000:00:10.0[A]: no GSI - using 
IRQ 0
Oct 27 10:19:06 tux ALI15X3: chipset revision 196
Oct 27 10:19:06 tux ALI15X3: not 100% native mode: will probe irqs later
Oct 27 10:19:06 tux ide0: BM-DMA at 0x9020-0x9027, BIOS settings: 
hda:DMA, hdb:pio
Oct 27 10:19:06 tux ide1: BM-DMA at 0x9028-0x902f, BIOS settings: 
hdc:DMA, hdd:pio
Oct 27 10:19:06 tux Probing IDE interface ide0...
Oct 27 10:19:06 tux hda: TOSHIBA MK3021GAS, ATA DISK drive
Oct 27 10:19:06 tux ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 27 10:19:06 tux Probing IDE interface ide1...
Oct 27 10:19:06 tux hdc: QSI CD-RW/DVD-ROM SBW-242, ATAPI CD/DVD-ROM drive
Oct 27 10:19:06 tux ide1 at 0x170-0x177,0x376 on irq 15
Oct 27 10:19:06 tux Probing IDE interface ide2...
Oct 27 10:19:06 tux Probing IDE interface ide3...
Oct 27 10:19:06 tux Probing IDE interface ide4...
Oct 27 10:19:06 tux Probing IDE interface ide5...
Oct 27 10:19:06 tux hda: max request size: 128KiB
Oct 27 10:19:06 tux hda: 58605120 sectors (30005 MB), CHS=58140/16/63, 
UDMA(100)
Oct 27 10:19:06 tux hda: cache flushes supported
Oct 27 10:19:06 tux hda: hda1 hda2 hda3
Oct 27 10:19:06 tux hdc: ATAPI 4X DVD-ROM CD-R/RW drive, 2048kB Cache, 
UDMA(33)
Oct 27 10:19:06 tux Uniform CD-ROM driver Revision: 3.20
Oct 27 10:19:06 tux CAPI Subsystem Rev 1.1.2.8
Oct 27 10:19:06 tux EISA: Probing bus 0 at eisa0
Oct 27 10:19:06 tux Cannot allocate resource for EISA slot 8
Oct 27 10:19:06 tux EISA: Detected 0 cards.
Oct 27 10:19:06 tux NET: Registered protocol family 2
Oct 27 10:19:06 tux IP: routing cache hash table of 2048 buckets, 16Kbytes
Oct 27 10:19:06 tux TCP established hash table entries: 8192 (order: 4, 
65536 bytes)
Oct 27 10:19:06 tux TCP bind hash table entries: 8192 (order: 4, 65536 
bytes)
Oct 27 10:19:06 tux TCP: Hash tables configured (established 8192 bind 8192)
Oct 27 10:19:06 tux NET: Registered protocol family 1
Oct 27 10:19:06 tux NET: Registered protocol family 17
Oct 27 10:19:06 tux RAMDISK: Compressed image found at block 0
Oct 27 10:19:06 tux VFS: Mounted root (ext2 filesystem) readonly.
Oct 27 10:19:06 tux Freeing unused kernel memory: 196k freed
Oct 27 10:19:06 tux usbcore: registered new driver usbfs
Oct 27 10:19:06 tux usbcore: registered new driver hub
Oct 27 10:19:06 tux usbcore: registered new driver hiddev
Oct 27 10:19:06 tux usbcore: registered new driver usbhid
Oct 27 10:19:06 tux drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Oct 27 10:19:06 tux Initializing USB Mass Storage driver...
Oct 27 10:19:06 tux usbcore: registered new driver usb-storage
Oct 27 10:19:06 tux USB Mass Storage support registered.
Oct 27 10:19:06 tux USB Universal Host Controller Interface driver v2.2
Oct 27 10:19:06 tux ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller 
(OHCI) Driver (PCI)
Oct 27 10:19:06 tux ACPI: PCI Interrupt Link [LNK8] enabled at IRQ 10
Oct 27 10:19:06 tux PCI: setting IRQ 10 as level-triggered
Oct 27 10:19:06 tux ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 10 
(level, low) -> IRQ 10
Oct 27 10:19:06 tux ohci_hcd 0000:00:02.0: OHCI Host Controller
Oct 27 10:19:06 tux ohci_hcd 0000:00:02.0: irq 10, pci mem 0xf0004000
Oct 27 10:19:06 tux ohci_hcd 0000:00:02.0: new USB bus registered, 
assigned bus number 1
Oct 27 10:19:06 tux hub 1-0:1.0: USB hub found
Oct 27 10:19:06 tux hub 1-0:1.0: 3 ports detected
Oct 27 10:19:06 tux sl811: driver sl811-hcd, 15 Dec 2004
Oct 27 10:19:06 tux ieee1394: Initialized config rom entry `ip1394'
Oct 27 10:19:06 tux ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
Oct 27 10:19:06 tux ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10
Oct 27 10:19:06 tux ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 10 
(level, low) -> IRQ 10
Oct 27 10:19:06 tux ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  
MMIO=[f0007000-f00077ff]  Max Packet=[2048]
Oct 27 10:19:06 tux sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
Oct 27 10:19:06 tux device-mapper: 4.4.0-ioctl (2005-01-12) initialised: 
dm-devel@redhat.com
Oct 27 10:19:06 tux libata version 1.10 loaded.
Oct 27 10:19:06 tux ReiserFS: hda3: warning: sh-2021: 
reiserfs_fill_super: can not find reiserfs on hda3
Oct 27 10:19:06 tux kjournald starting.  Commit interval 5 seconds
Oct 27 10:19:06 tux EXT3 FS on hda3, internal journal
Oct 27 10:19:06 tux EXT3-fs: mounted filesystem with ordered data mode.
Oct 27 10:19:06 tux ieee1394: Host added: ID:BUS[0-00:1023]  
GUID[00c09f00000841c2]
Oct 27 10:19:06 tux eth1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
Oct 27 10:19:06 tux eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet 
(fw-host0)
Oct 27 10:19:06 tux Adding 541792k swap on /dev/hda2.  Priority:-1 extents:1
Oct 27 10:19:06 tux EXT3 FS on hda3, internal journal
Oct 27 10:19:06 tux Real Time Clock Driver v1.12
Oct 27 10:19:06 tux hda: drive_cmd: status=0x51 { DriveReady 
SeekComplete Error }
Oct 27 10:19:06 tux hda: drive_cmd: error=0x04 { DriveStatusError }
Oct 27 10:19:06 tux ide: failed opcode was: 0xef
Oct 27 10:19:06 tux NET: Registered protocol family 10
Oct 27 10:19:06 tux Disabled Privacy Extensions on device c03b0160(lo)
Oct 27 10:19:06 tux IPv6 over IPv4 tunneling driver
Oct 27 10:19:06 tux Linux Kernel Card Services
Oct 27 10:19:06 tux options:  [pci] [cardbus] [pm]
Oct 27 10:19:06 tux ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 10
Oct 27 10:19:06 tux ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 10 
(level, low) -> IRQ 10
Oct 27 10:19:06 tux Yenta: CardBus bridge found at 0000:00:0a.0 [152d:0705]
Oct 27 10:19:06 tux Yenta: ISA IRQ mask 0x0000, PCI irq 10
Oct 27 10:19:06 tux Socket status: 30000006
Oct 27 10:19:07 tux cardmgr[10959]: watching 1 socket
Oct 27 10:19:07 tux cs: IO port probe 0xc00-0xcff: clean.
Oct 27 10:19:07 tux cs: IO port probe 0x800-0x8ff: clean.
Oct 27 10:19:07 tux cs: IO port probe 0x100-0x4ff: excluding 0x200-0x207 
0x378-0x37f
Oct 27 10:19:07 tux cs: IO port probe 0xa00-0xaff: clean.
Oct 27 10:19:07 tux dhcpcd[10974]: dhcpStart: interface eth0 is not 
Ethernet or 802.2 Token Ring
Oct 27 10:19:07 tux cron[11021]: (CRON) STARTUP (V5.0)
Oct 27 10:20:02 tux cron[11176]: (root) CMD (test -x /usr/sbin/run-crons 
&& /usr/sbin/run-crons )

-- 
Vladimir Dmitrichenkov
CJSB "Surgutneftegasbank"
19, Kukuevitsky Str.
628400,Surgut,Khanty-Mansy region,Russia
Email :  wan@sngb.ru
Phone :  +7 (3462) 39-85-09
	 +7-922-250-50-57


-- 
gentoo-user-ru@gentoo.org mailing list

[gentoo-user-ru] Re: [gentoo-user-ru] Т.к. недавно с *NIX-системами, то не могу понять....

[Antonio]

> IPv6 over IPv4 tunneling driver

Cурово!

Ну а если по теме, то что-то произошло с драйвером сетевухи, либо с
самой сетевухой.

# lspci
# lsmod
# /etc/init.d/net.eth0 restart
# tail /var/log/messages

--
Best Regards,
Antonio

-- 
gentoo-user-ru@gentoo.org mailing list

Re: [gentoo-user-ru] Re: [gentoo-user-ru] Т.к. недавно с *NIX-системами, то не могу понять....

[Vladimir Dmitrichenkov]

[-- Attachment #1: Type: text/plain, Size: 425 bytes --]

Antonio said the following on 27.10.2005 12:26:

>>IPv6 over IPv4 tunneling driver
>>    
>>
>
>Cурово!
>  
>
согласен...... ядро не ковырял.... но у меня все еще впереди :)

-- 
Vladimir Dmitrichenkov
CJSB "Surgutneftegasbank"
19, Kukuevitsky Str.
628400,Surgut,Khanty-Mansy region,Russia
Email :  wan@sngb.ru
Phone :  +7 (3462) 39-85-09
	 +7-922-250-50-57


[-- Attachment #2: Type: text/html, Size: 955 bytes --]

Re[2]: [gentoo-user-ru] Re: [gentoo-user-ru] Т.к. недавно с *NIX-системами, то не могу понять....

[Tropyichev Andrey]

Здравствуйте, Vladimir.

Вы писали 27 октября 2005 г., 17:50:55:

VD>  Antonio said the following on 27.10.2005 12:26: 
  
  
VD> IPv6 over IPv4 tunneling driver 
  
  
VD> Cурово! 

VD>  согласен...... ядро не ковырял.... но у меня все еще впереди :)


А с чего всё началось? Не с пересборки ядра? Какая карта, кстати. в
dmesg я что-то не нашёл сообщения о загрузке драйвера... Может ты ядро
установил а make modules_install забыл сделать (у самого так раз было,
да ещё на удаленной машине - нечего по ночам работать, блин;)))

-- 
С уважением,
 Tropyichev Andrey                         mailto:postmaster@rosmet.net

-- 
gentoo-user-ru@gentoo.org mailing list

Re: [gentoo-user-ru] Re: [gentoo-user-ru] Т.к. недавно с *NIX-системами, то не могу понять....

[Vladimir Dmitrichenkov]

Tropyichev Andrey said the following on 27.10.2005 15:31:

>Здравствуйте, Vladimir.
>
>А с чего всё началось? Не с пересборки ядра? Какая карта, кстати. в
>dmesg я что-то не нашёл сообщения о загрузке драйвера... Может ты ядро
>установил а make modules_install забыл сделать (у самого так раз было,
>да ещё на удаленной машине - нечего по ночам работать, блин;)))
>  
>
Всем спасибо, разобрался............ а ведь действительно,.... видать 
нечаянно закоментарил модуль в автозагрузке.....

-- 
Vladimir Dmitrichenkov
CJSB "Surgutneftegasbank"
19, Kukuevitsky Str.
628400,Surgut,Khanty-Mansy region,Russia
Email :  wan@sngb.ru
Phone :  +7 (3462) 39-85-09
	 +7-922-250-50-57


-- 
gentoo-user-ru@gentoo.org mailing list