* [gentoo-user-es] ERROR: dev-util/boost-build-1.55.0::gentoo failed
@ 2014-12-19 2:45 Freddy Taborda
2014-12-19 13:55 ` Santiago López Denazis
0 siblings, 1 reply; 14+ messages in thread
From: Freddy Taborda @ 2014-12-19 2:45 UTC (permalink / raw
To: gentoo-user-es
[-- Attachment #1: Type: text/plain, Size: 8251 bytes --]
Hola, hace mucho que no usaba Linux y mucho menos Gentoo, ya que no tenia
equipo, ahora estoy haciendo una nueva instalacion
http://terracenter.blogspot.com/2014/12/instalacion-de-gentoo-en-una-laptop.html
(le falta mucho a este tuto para dejarlo decente), pero al momento de
instalar lvm2 la compilacion me da estos errores
# emerge -pv lvm2
* IMPORTANT: 5 config files in '/etc/portage' need updating.
* See the CONFIGURATION FILES section of the emerge
* man page to learn how to update config files.
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild N ] dev-util/boost-build-1.55.0 USE="python -examples {-test}" 0
KiB
[ebuild N ] virtual/libudev-215-r1:0/1 USE="systemd -static-libs"
ABI_X86="(64) (-32) (-x32)" 0 KiB
[ebuild N ] dev-libs/boost-1.55.0-r2:0/1.55.0 USE="nls python threads
-context -debug -doc -icu -mpi -static-libs -tools"
ABI_X86="(64) (-32) (-x32)" PYTHON_TARGETS="python2_7 python3_3 -python3_4"
0 KiB
[ebuild N ] sys-block/thin-provisioning-tools-0.3.2-r1 USE="{-test}" 0 KiB
[ebuild N ] sys-fs/lvm2-2.02.109 USE="readline systemd thin udev (-clvm)
(-cman) -device-mapper-only -lvm1 -lvm2create_ini
trd (-selinux) -static -static-libs" 0 KiB
* ERROR: dev-util/boost-build-1.55.0::gentoo failed (compile phase):
* building bjam failed
*
* Call stack:
* ebuild.sh, line 93: Called src_compile
* environment, line 4955: Called die
* The specific snippet of code:
* CC=$(tc-getCC) ./build.sh ${toolset} -d+2 $(use_with python python
"${EROOT}"/usr) || die "building bjam failed"
*
* If you need support, post the output of `emerge --info
'=dev-util/boost-build-1.55.0::gentoo'`,
* the complete build log and the output of `emerge -pqv
'=dev-util/boost-build-1.55.0::gentoo'`.
* The complete build log is located at
'/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log'.
* The ebuild environment file is located at
'/var/tmp/portage/dev-util/boost-build-1.55.0/temp/environment'.
* Working directory:
'/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2/engine'
* S:
'/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2'
>>> Failed to emerge dev-util/boost-build-1.55.0, Log file:
>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log'
* Messages for package dev-util/boost-build-1.55.0:
* ERROR: dev-util/boost-build-1.55.0::gentoo failed (compile phase):
* building bjam failed
*
* Call stack:
* ebuild.sh, line 93: Called src_compile
* environment, line 4955: Called die
* The specific snippet of code:
* CC=$(tc-getCC) ./build.sh ${toolset} -d+2 $(use_with python python
"${EROOT}"/usr) || die "building bjam failed"
*
* If you need support, post the output of `emerge --info
'=dev-util/boost-build-1.55.0::gentoo'`,
* the complete build log and the output of `emerge -pqv
'=dev-util/boost-build-1.55.0::gentoo'`.
* The complete build log is located at
'/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log'.
* The ebuild environment file is located at
'/var/tmp/portage/dev-util/boost-build-1.55.0/temp/environment'.
* Working directory:
'/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2/engine'
* S:
'/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2'
livecd / #
# emerge --info '=dev-libs/boost-1.55.0::gentoo'
Portage 2.2.14 (python 2.7.7-final-0, default/linux/amd64/13.0, gcc-4.8.3,
glibc-2.19-r1, 3.16.5-gentoo x86_64)
=================================================================
System Settings
=================================================================
System uname: Linux-3.16.5-gentoo-x86_64-Intel-R-_Pentium-R-_CPU_2020M_@
_2.40GHz-with-gentoo-2.2
KiB Mem: 3927272 total, 81700 free
KiB Swap: 2097148 total, 2096904 free
Timestamp of tree: Thu, 18 Dec 2014 17:15:01 +0000
ld GNU ld (Gentoo 2.24 p1.4) 2.24
app-shells/bash: 4.2_p53
dev-lang/perl: 5.18.2-r2
dev-lang/python: 2.7.7, 3.3.5-r1
dev-util/pkgconfig: 0.28-r1
sys-apps/baselayout: 2.2
sys-apps/openrc: 0.12.4
sys-apps/sandbox: 2.6-r1
sys-devel/autoconf: 2.69
sys-devel/automake: 1.13.4
sys-devel/binutils: 2.24-r3
sys-devel/gcc: 4.8.3
sys-devel/gcc-config: 1.7.3
sys-devel/libtool: 2.4.2-r1
sys-devel/make: 4.0-r1
sys-kernel/linux-headers: 3.16 (virtual/os-headers)
Repositories: gentoo
ACCEPT_LICENSE="*"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=core-avx-i -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/gconf
/etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc
/terminfo"
CXXFLAGS="-march=core-avx-i -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FCFLAGS="-O2 -pipe"
FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks
ebuild-locks fixlafiles merge-sync news parallel-fetch
preserve-libs protect-owned sandbox sfperms strict unknown-features-warn
unmerge-logs unmerge-orphans userfetch userpriv usersa
ndbox usersync"
FFLAGS="-O2 -pipe"
GENTOO_MIRRORS="rsync://gentoo.c3sl.ufpr.br/gentoo/
http://gentoo.c3sl.ufpr.br/ ftp://gentoo.c3sl.ufpr.br/gentoo/ http://www.las
.ic.unicamp.br/pub/gentoo/ ftp://ftp.las.ic.unicamp.br/pub/gentoo/"
LANG="es_VE.utf8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
MAKEOPTS="-j1"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times
--omit-dir-times --compress --force --whole-file --delete -
-stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local
--exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY=""
SYNC="rsync://rsync1.br.gentoo.org/gentoo-portage"
USE="acl amd64 berkdb bindist bzip2 cli cracklib crypt cxx dri fortran gdbm
iconv ipv6 mmx modules multilib multiuser ncurses nl
s nptl openmp pam pcre python readline session sse sse2 ssl systemd tcpd
unicode zlib" ABI_X86="64" ALSA_CARDS="intel" APACHE2_M
ODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic
authn_alias authn_anon authn_dbm authn_default authn_
file authz_dbm authz_default authz_groupfile authz_host authz_owner
authz_user autoindex cache cgi cgid dav dav_fs dav_lock defl
ate dir disk_cache env expires ext_filter file_cache filter headers include
info log_config logio mem_cache mime mime_magic nego
tiation rewrite setenvif speling status unique_id userdir usertrack
vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets
stage tables krita karbon braindump author" CAMERAS="ptp2"
COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" E
LIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin
garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oce
anserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip
tripmate tnt ublox ubx" INPUT_DEVICES="keyboard mouse e
vdev synaptics" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk
hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_E
XTENSIONS="presenter-console presenter-minimizer" LINGUAS="es"
OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-5" PYTHON_S
INGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_3"
RUBY_TARGETS="ruby19 ruby20" USERLAND="GNU" VIDEO_CARDS="intel" XT
ABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface
geoip fuzzy condition tee tarpit sysrq steal rawnat
logmark ipmark dhcpmac delude chaos account"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL,
PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRES
S_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON
Muchas gracias por la ayuda que me puedan dar, ya que no he encontrado
referencia a esa version, trate de montar la r1, pero tambien me sale
error.
--
Freddy Taborda
Consultor Técnico
Valencia - Venezuela
GNU/Linux user #283478
ECE #208825114
What gets us into trouble is not what we don't know. It's what we know for
sure that just ain't so.
Mark Twain
"Those that can, do. Those that can’t, complain."
Linus Torvalds
[-- Attachment #2: Type: text/html, Size: 11213 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [gentoo-user-es] ERROR: dev-util/boost-build-1.55.0::gentoo failed 2014-12-19 2:45 [gentoo-user-es] ERROR: dev-util/boost-build-1.55.0::gentoo failed Freddy Taborda @ 2014-12-19 13:55 ` Santiago López Denazis 2014-12-19 15:32 ` Freddy Taborda 0 siblings, 1 reply; 14+ messages in thread From: Santiago López Denazis @ 2014-12-19 13:55 UTC (permalink / raw To: gentoo-user-es On 12/18/2014 11:45 PM, Freddy Taborda wrote: > Hola, hace mucho que no usaba Linux y mucho menos Gentoo, ya que no tenia > equipo, ahora estoy haciendo una nueva instalacion > http://terracenter.blogspot.com/2014/12/instalacion-de-gentoo-en-una-laptop.html > (le falta mucho a este tuto para dejarlo decente), pero al momento de > instalar lvm2 la compilacion me da estos errores > Buenos días Freddy, si no es un problema para lo que necesitás, intenta compilarlo con -python: echo dev-util/boost-build -python >> /etc/portage/package.use Saludos, > > > # emerge -pv lvm2 > > * IMPORTANT: 5 config files in '/etc/portage' need updating. > * See the CONFIGURATION FILES section of the emerge > * man page to learn how to update config files. > > These are the packages that would be merged, in order: > > Calculating dependencies... done! > [ebuild N ] dev-util/boost-build-1.55.0 USE="python -examples {-test}" 0 > KiB > [ebuild N ] virtual/libudev-215-r1:0/1 USE="systemd -static-libs" > ABI_X86="(64) (-32) (-x32)" 0 KiB > [ebuild N ] dev-libs/boost-1.55.0-r2:0/1.55.0 USE="nls python threads > -context -debug -doc -icu -mpi -static-libs -tools" > ABI_X86="(64) (-32) (-x32)" PYTHON_TARGETS="python2_7 python3_3 -python3_4" > 0 KiB > [ebuild N ] sys-block/thin-provisioning-tools-0.3.2-r1 USE="{-test}" 0 KiB > [ebuild N ] sys-fs/lvm2-2.02.109 USE="readline systemd thin udev (-clvm) > (-cman) -device-mapper-only -lvm1 -lvm2create_ini > trd (-selinux) -static -static-libs" 0 KiB > > > > * ERROR: dev-util/boost-build-1.55.0::gentoo failed (compile phase): > * building bjam failed > * > * Call stack: > * ebuild.sh, line 93: Called src_compile > * environment, line 4955: Called die > * The specific snippet of code: > * CC=$(tc-getCC) ./build.sh ${toolset} -d+2 $(use_with python python > "${EROOT}"/usr) || die "building bjam failed" > * > * If you need support, post the output of `emerge --info > '=dev-util/boost-build-1.55.0::gentoo'`, > * the complete build log and the output of `emerge -pqv > '=dev-util/boost-build-1.55.0::gentoo'`. > * The complete build log is located at > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log'. > * The ebuild environment file is located at > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/environment'. > * Working directory: > '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2/engine' > * S: > '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2' > >>>> Failed to emerge dev-util/boost-build-1.55.0, Log file: > >>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log' > > * Messages for package dev-util/boost-build-1.55.0: > > * ERROR: dev-util/boost-build-1.55.0::gentoo failed (compile phase): > * building bjam failed > * > * Call stack: > * ebuild.sh, line 93: Called src_compile > * environment, line 4955: Called die > * The specific snippet of code: > * CC=$(tc-getCC) ./build.sh ${toolset} -d+2 $(use_with python python > "${EROOT}"/usr) || die "building bjam failed" > * > * If you need support, post the output of `emerge --info > '=dev-util/boost-build-1.55.0::gentoo'`, > * the complete build log and the output of `emerge -pqv > '=dev-util/boost-build-1.55.0::gentoo'`. > * The complete build log is located at > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log'. > * The ebuild environment file is located at > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/environment'. > * Working directory: > '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2/engine' > * S: > '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2' > livecd / # > > # emerge --info '=dev-libs/boost-1.55.0::gentoo' > Portage 2.2.14 (python 2.7.7-final-0, default/linux/amd64/13.0, gcc-4.8.3, > glibc-2.19-r1, 3.16.5-gentoo x86_64) > ================================================================= > System Settings > ================================================================= > System uname: Linux-3.16.5-gentoo-x86_64-Intel-R-_Pentium-R-_CPU_2020M_@ > _2.40GHz-with-gentoo-2.2 > KiB Mem: 3927272 total, 81700 free > KiB Swap: 2097148 total, 2096904 free > Timestamp of tree: Thu, 18 Dec 2014 17:15:01 +0000 > ld GNU ld (Gentoo 2.24 p1.4) 2.24 > app-shells/bash: 4.2_p53 > dev-lang/perl: 5.18.2-r2 > dev-lang/python: 2.7.7, 3.3.5-r1 > dev-util/pkgconfig: 0.28-r1 > sys-apps/baselayout: 2.2 > sys-apps/openrc: 0.12.4 > sys-apps/sandbox: 2.6-r1 > sys-devel/autoconf: 2.69 > sys-devel/automake: 1.13.4 > sys-devel/binutils: 2.24-r3 > sys-devel/gcc: 4.8.3 > sys-devel/gcc-config: 1.7.3 > sys-devel/libtool: 2.4.2-r1 > sys-devel/make: 4.0-r1 > sys-kernel/linux-headers: 3.16 (virtual/os-headers) > Repositories: gentoo > ACCEPT_LICENSE="*" > CBUILD="x86_64-pc-linux-gnu" > CFLAGS="-march=core-avx-i -O2 -pipe" > CHOST="x86_64-pc-linux-gnu" > CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt" > CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/gconf > /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc > /terminfo" > CXXFLAGS="-march=core-avx-i -O2 -pipe" > DISTDIR="/usr/portage/distfiles" > FCFLAGS="-O2 -pipe" > FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks > ebuild-locks fixlafiles merge-sync news parallel-fetch > preserve-libs protect-owned sandbox sfperms strict unknown-features-warn > unmerge-logs unmerge-orphans userfetch userpriv usersa > ndbox usersync" > FFLAGS="-O2 -pipe" > GENTOO_MIRRORS="rsync://gentoo.c3sl.ufpr.br/gentoo/ > http://gentoo.c3sl.ufpr.br/ ftp://gentoo.c3sl.ufpr.br/gentoo/ http://www.las > > .ic.unicamp.br/pub/gentoo/ ftp://ftp.las.ic.unicamp.br/pub/gentoo/" > LANG="es_VE.utf8" > LDFLAGS="-Wl,-O1 -Wl,--as-needed" > MAKEOPTS="-j1" > PKGDIR="/usr/portage/packages" > PORTAGE_CONFIGROOT="/" > PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times > --omit-dir-times --compress --force --whole-file --delete - > -stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local > --exclude=/packages" > PORTAGE_TMPDIR="/var/tmp" > PORTDIR="/usr/portage" > PORTDIR_OVERLAY="" > SYNC="rsync://rsync1.br.gentoo.org/gentoo-portage" > USE="acl amd64 berkdb bindist bzip2 cli cracklib crypt cxx dri fortran gdbm > iconv ipv6 mmx modules multilib multiuser ncurses nl > s nptl openmp pam pcre python readline session sse sse2 ssl systemd tcpd > unicode zlib" ABI_X86="64" ALSA_CARDS="intel" APACHE2_M > ODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic > authn_alias authn_anon authn_dbm authn_default authn_ > file authz_dbm authz_default authz_groupfile authz_host authz_owner > authz_user autoindex cache cgi cgid dav dav_fs dav_lock defl > ate dir disk_cache env expires ext_filter file_cache filter headers include > info log_config logio mem_cache mime mime_magic nego > tiation rewrite setenvif speling status unique_id userdir usertrack > vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets > stage tables krita karbon braindump author" CAMERAS="ptp2" > COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" E > LIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin > garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oce > anserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip > tripmate tnt ublox ubx" INPUT_DEVICES="keyboard mouse e > vdev synaptics" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk > hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_E > XTENSIONS="presenter-console presenter-minimizer" LINGUAS="es" > OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-5" PYTHON_S > INGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_3" > RUBY_TARGETS="ruby19 ruby20" USERLAND="GNU" VIDEO_CARDS="intel" XT > ABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface > geoip fuzzy condition tee tarpit sysrq steal rawnat > logmark ipmark dhcpmac delude chaos account" > Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, > PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRES > S_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON > > > > > Muchas gracias por la ayuda que me puedan dar, ya que no he encontrado > referencia a esa version, trate de montar la r1, pero tambien me sale > error. > > -- Santiago López Denazis GNU/Linux SysAdmin sldenazis@linux.com Free your source, free your mind. ---- Por favor, no utilice formatos de archivo privativos para el intercambio de documentos, como DOC y XLS, sino HTML, PDF, TXT, CSV o cualquier otro que no obligue a utilizar un programa de un fabricante concreto. Vea http://www.gnu.org/philosophy/no-word-attachments.es.html -- ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user-es] ERROR: dev-util/boost-build-1.55.0::gentoo failed 2014-12-19 13:55 ` Santiago López Denazis @ 2014-12-19 15:32 ` Freddy Taborda 2014-12-19 15:49 ` KyD 0 siblings, 1 reply; 14+ messages in thread From: Freddy Taborda @ 2014-12-19 15:32 UTC (permalink / raw To: gentoo-user-es [-- Attachment #1: Type: text/plain, Size: 9910 bytes --] Santiago gracias por tus comentarios. Igual con el mismo problema. http://pastebin.com/AquYw1GA Alguna idea mas. Saludos 2014-12-19 9:25 GMT-04:30 Santiago López Denazis <sldenazis@linux.com>: > On 12/18/2014 11:45 PM, Freddy Taborda wrote: > > Hola, hace mucho que no usaba Linux y mucho menos Gentoo, ya que no tenia > > equipo, ahora estoy haciendo una nueva instalacion > > > http://terracenter.blogspot.com/2014/12/instalacion-de-gentoo-en-una-laptop.html > > (le falta mucho a este tuto para dejarlo decente), pero al momento de > > instalar lvm2 la compilacion me da estos errores > > > > Buenos días Freddy, si no es un problema para lo que necesitás, > intenta compilarlo con -python: > > echo dev-util/boost-build -python >> /etc/portage/package.use > > Saludos, > > > > > > > # emerge -pv lvm2 > > > > * IMPORTANT: 5 config files in '/etc/portage' need updating. > > * See the CONFIGURATION FILES section of the emerge > > * man page to learn how to update config files. > > > > These are the packages that would be merged, in order: > > > > Calculating dependencies... done! > > [ebuild N ] dev-util/boost-build-1.55.0 USE="python -examples {-test}" 0 > > KiB > > [ebuild N ] virtual/libudev-215-r1:0/1 USE="systemd -static-libs" > > ABI_X86="(64) (-32) (-x32)" 0 KiB > > [ebuild N ] dev-libs/boost-1.55.0-r2:0/1.55.0 USE="nls python threads > > -context -debug -doc -icu -mpi -static-libs -tools" > > ABI_X86="(64) (-32) (-x32)" PYTHON_TARGETS="python2_7 python3_3 > -python3_4" > > 0 KiB > > [ebuild N ] sys-block/thin-provisioning-tools-0.3.2-r1 USE="{-test}" 0 > KiB > > [ebuild N ] sys-fs/lvm2-2.02.109 USE="readline systemd thin udev (-clvm) > > (-cman) -device-mapper-only -lvm1 -lvm2create_ini > > trd (-selinux) -static -static-libs" 0 KiB > > > > > > > > * ERROR: dev-util/boost-build-1.55.0::gentoo failed (compile phase): > > * building bjam failed > > * > > * Call stack: > > * ebuild.sh, line 93: Called src_compile > > * environment, line 4955: Called die > > * The specific snippet of code: > > * CC=$(tc-getCC) ./build.sh ${toolset} -d+2 $(use_with python python > > "${EROOT}"/usr) || die "building bjam failed" > > * > > * If you need support, post the output of `emerge --info > > '=dev-util/boost-build-1.55.0::gentoo'`, > > * the complete build log and the output of `emerge -pqv > > '=dev-util/boost-build-1.55.0::gentoo'`. > > * The complete build log is located at > > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log'. > > * The ebuild environment file is located at > > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/environment'. > > * Working directory: > > > '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2/engine' > > * S: > > > '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2' > > > >>>> Failed to emerge dev-util/boost-build-1.55.0, Log file: > > > >>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log' > > > > * Messages for package dev-util/boost-build-1.55.0: > > > > * ERROR: dev-util/boost-build-1.55.0::gentoo failed (compile phase): > > * building bjam failed > > * > > * Call stack: > > * ebuild.sh, line 93: Called src_compile > > * environment, line 4955: Called die > > * The specific snippet of code: > > * CC=$(tc-getCC) ./build.sh ${toolset} -d+2 $(use_with python python > > "${EROOT}"/usr) || die "building bjam failed" > > * > > * If you need support, post the output of `emerge --info > > '=dev-util/boost-build-1.55.0::gentoo'`, > > * the complete build log and the output of `emerge -pqv > > '=dev-util/boost-build-1.55.0::gentoo'`. > > * The complete build log is located at > > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log'. > > * The ebuild environment file is located at > > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/environment'. > > * Working directory: > > > '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2/engine' > > * S: > > > '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2' > > livecd / # > > > > # emerge --info '=dev-libs/boost-1.55.0::gentoo' > > Portage 2.2.14 (python 2.7.7-final-0, default/linux/amd64/13.0, > gcc-4.8.3, > > glibc-2.19-r1, 3.16.5-gentoo x86_64) > > ================================================================= > > System Settings > > ================================================================= > > System uname: Linux-3.16.5-gentoo-x86_64-Intel-R-_Pentium-R-_CPU_2020M_@ > > _2.40GHz-with-gentoo-2.2 > > KiB Mem: 3927272 total, 81700 free > > KiB Swap: 2097148 total, 2096904 free > > Timestamp of tree: Thu, 18 Dec 2014 17:15:01 +0000 > > ld GNU ld (Gentoo 2.24 p1.4) 2.24 > > app-shells/bash: 4.2_p53 > > dev-lang/perl: 5.18.2-r2 > > dev-lang/python: 2.7.7, 3.3.5-r1 > > dev-util/pkgconfig: 0.28-r1 > > sys-apps/baselayout: 2.2 > > sys-apps/openrc: 0.12.4 > > sys-apps/sandbox: 2.6-r1 > > sys-devel/autoconf: 2.69 > > sys-devel/automake: 1.13.4 > > sys-devel/binutils: 2.24-r3 > > sys-devel/gcc: 4.8.3 > > sys-devel/gcc-config: 1.7.3 > > sys-devel/libtool: 2.4.2-r1 > > sys-devel/make: 4.0-r1 > > sys-kernel/linux-headers: 3.16 (virtual/os-headers) > > Repositories: gentoo > > ACCEPT_LICENSE="*" > > CBUILD="x86_64-pc-linux-gnu" > > CFLAGS="-march=core-avx-i -O2 -pipe" > > CHOST="x86_64-pc-linux-gnu" > > CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt" > > CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/gconf > > /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc > > /terminfo" > > CXXFLAGS="-march=core-avx-i -O2 -pipe" > > DISTDIR="/usr/portage/distfiles" > > FCFLAGS="-O2 -pipe" > > FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks > > ebuild-locks fixlafiles merge-sync news parallel-fetch > > preserve-libs protect-owned sandbox sfperms strict unknown-features-warn > > unmerge-logs unmerge-orphans userfetch userpriv usersa > > ndbox usersync" > > FFLAGS="-O2 -pipe" > > GENTOO_MIRRORS="rsync://gentoo.c3sl.ufpr.br/gentoo/ > > http://gentoo.c3sl.ufpr.br/ ftp://gentoo.c3sl.ufpr.br/gentoo/ > http://www.las > > > > .ic.unicamp.br/pub/gentoo/ ftp://ftp.las.ic.unicamp.br/pub/gentoo/" > > LANG="es_VE.utf8" > > LDFLAGS="-Wl,-O1 -Wl,--as-needed" > > MAKEOPTS="-j1" > > PKGDIR="/usr/portage/packages" > > PORTAGE_CONFIGROOT="/" > > PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times > > --omit-dir-times --compress --force --whole-file --delete - > > -stats --human-readable --timeout=180 --exclude=/distfiles > --exclude=/local > > --exclude=/packages" > > PORTAGE_TMPDIR="/var/tmp" > > PORTDIR="/usr/portage" > > PORTDIR_OVERLAY="" > > SYNC="rsync://rsync1.br.gentoo.org/gentoo-portage" > > USE="acl amd64 berkdb bindist bzip2 cli cracklib crypt cxx dri fortran > gdbm > > iconv ipv6 mmx modules multilib multiuser ncurses nl > > s nptl openmp pam pcre python readline session sse sse2 ssl systemd tcpd > > unicode zlib" ABI_X86="64" ALSA_CARDS="intel" APACHE2_M > > ODULES="authn_core authz_core socache_shmcb unixd actions alias > auth_basic > > authn_alias authn_anon authn_dbm authn_default authn_ > > file authz_dbm authz_default authz_groupfile authz_host authz_owner > > authz_user autoindex cache cgi cgid dav dav_fs dav_lock defl > > ate dir disk_cache env expires ext_filter file_cache filter headers > include > > info log_config logio mem_cache mime mime_magic nego > > tiation rewrite setenvif speling status unique_id userdir usertrack > > vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets > > stage tables krita karbon braindump author" CAMERAS="ptp2" > > COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" E > > LIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin > > garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oce > > anserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip > > tripmate tnt ublox ubx" INPUT_DEVICES="keyboard mouse e > > vdev synaptics" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk > > hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_E > > XTENSIONS="presenter-console presenter-minimizer" LINGUAS="es" > > OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-5" PYTHON_S > > INGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_3" > > RUBY_TARGETS="ruby19 ruby20" USERLAND="GNU" VIDEO_CARDS="intel" XT > > ABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p > iface > > geoip fuzzy condition tee tarpit sysrq steal rawnat > > logmark ipmark dhcpmac delude chaos account" > > Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, > > PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRES > > S_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON > > > > > > > > > > Muchas gracias por la ayuda que me puedan dar, ya que no he encontrado > > referencia a esa version, trate de montar la r1, pero tambien me sale > > error. > > > > > > > -- > Santiago López Denazis > GNU/Linux SysAdmin > sldenazis@linux.com > Free your source, free your mind. > ---- > Por favor, no utilice formatos de archivo privativos para el intercambio > de documentos, como DOC y XLS, sino HTML, PDF, TXT, CSV o cualquier otro > que no obligue a utilizar un programa de un fabricante concreto. Vea > http://www.gnu.org/philosophy/no-word-attachments.es.html > -- > > -- Freddy Taborda Consultor Técnico Valencia - Venezuela GNU/Linux user #283478 ECE #208825114 What gets us into trouble is not what we don't know. It's what we know for sure that just ain't so. Mark Twain "Those that can, do. Those that can’t, complain." Linus Torvalds [-- Attachment #2: Type: text/html, Size: 13040 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user-es] ERROR: dev-util/boost-build-1.55.0::gentoo failed 2014-12-19 15:32 ` Freddy Taborda @ 2014-12-19 15:49 ` KyD 2014-12-19 16:12 ` Freddy Taborda 0 siblings, 1 reply; 14+ messages in thread From: KyD @ 2014-12-19 15:49 UTC (permalink / raw To: gentoo-user-es [-- Attachment #1: Type: text/plain, Size: 10284 bytes --] cat make.conf 2014-12-19 12:32 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: > > Santiago gracias por tus comentarios. > > Igual con el mismo problema. > > http://pastebin.com/AquYw1GA > > Alguna idea mas. > > Saludos > > 2014-12-19 9:25 GMT-04:30 Santiago López Denazis <sldenazis@linux.com>: > > On 12/18/2014 11:45 PM, Freddy Taborda wrote: >> > Hola, hace mucho que no usaba Linux y mucho menos Gentoo, ya que no >> tenia >> > equipo, ahora estoy haciendo una nueva instalacion >> > >> http://terracenter.blogspot.com/2014/12/instalacion-de-gentoo-en-una-laptop.html >> > (le falta mucho a este tuto para dejarlo decente), pero al momento de >> > instalar lvm2 la compilacion me da estos errores >> > >> >> Buenos días Freddy, si no es un problema para lo que necesitás, >> intenta compilarlo con -python: >> >> echo dev-util/boost-build -python >> /etc/portage/package.use >> >> Saludos, >> >> > >> > >> > # emerge -pv lvm2 >> > >> > * IMPORTANT: 5 config files in '/etc/portage' need updating. >> > * See the CONFIGURATION FILES section of the emerge >> > * man page to learn how to update config files. >> > >> > These are the packages that would be merged, in order: >> > >> > Calculating dependencies... done! >> > [ebuild N ] dev-util/boost-build-1.55.0 USE="python -examples {-test}" 0 >> > KiB >> > [ebuild N ] virtual/libudev-215-r1:0/1 USE="systemd -static-libs" >> > ABI_X86="(64) (-32) (-x32)" 0 KiB >> > [ebuild N ] dev-libs/boost-1.55.0-r2:0/1.55.0 USE="nls python threads >> > -context -debug -doc -icu -mpi -static-libs -tools" >> > ABI_X86="(64) (-32) (-x32)" PYTHON_TARGETS="python2_7 python3_3 >> -python3_4" >> > 0 KiB >> > [ebuild N ] sys-block/thin-provisioning-tools-0.3.2-r1 USE="{-test}" 0 >> KiB >> > [ebuild N ] sys-fs/lvm2-2.02.109 USE="readline systemd thin udev (-clvm) >> > (-cman) -device-mapper-only -lvm1 -lvm2create_ini >> > trd (-selinux) -static -static-libs" 0 KiB >> > >> > >> > >> > * ERROR: dev-util/boost-build-1.55.0::gentoo failed (compile phase): >> > * building bjam failed >> > * >> > * Call stack: >> > * ebuild.sh, line 93: Called src_compile >> > * environment, line 4955: Called die >> > * The specific snippet of code: >> > * CC=$(tc-getCC) ./build.sh ${toolset} -d+2 $(use_with python python >> > "${EROOT}"/usr) || die "building bjam failed" >> > * >> > * If you need support, post the output of `emerge --info >> > '=dev-util/boost-build-1.55.0::gentoo'`, >> > * the complete build log and the output of `emerge -pqv >> > '=dev-util/boost-build-1.55.0::gentoo'`. >> > * The complete build log is located at >> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log'. >> > * The ebuild environment file is located at >> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/environment'. >> > * Working directory: >> > >> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2/engine' >> > * S: >> > >> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2' >> > >> >>>> Failed to emerge dev-util/boost-build-1.55.0, Log file: >> > >> >>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log' >> > >> > * Messages for package dev-util/boost-build-1.55.0: >> > >> > * ERROR: dev-util/boost-build-1.55.0::gentoo failed (compile phase): >> > * building bjam failed >> > * >> > * Call stack: >> > * ebuild.sh, line 93: Called src_compile >> > * environment, line 4955: Called die >> > * The specific snippet of code: >> > * CC=$(tc-getCC) ./build.sh ${toolset} -d+2 $(use_with python python >> > "${EROOT}"/usr) || die "building bjam failed" >> > * >> > * If you need support, post the output of `emerge --info >> > '=dev-util/boost-build-1.55.0::gentoo'`, >> > * the complete build log and the output of `emerge -pqv >> > '=dev-util/boost-build-1.55.0::gentoo'`. >> > * The complete build log is located at >> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log'. >> > * The ebuild environment file is located at >> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/environment'. >> > * Working directory: >> > >> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2/engine' >> > * S: >> > >> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2' >> > livecd / # >> > >> > # emerge --info '=dev-libs/boost-1.55.0::gentoo' >> > Portage 2.2.14 (python 2.7.7-final-0, default/linux/amd64/13.0, >> gcc-4.8.3, >> > glibc-2.19-r1, 3.16.5-gentoo x86_64) >> > ================================================================= >> > System Settings >> > ================================================================= >> > System uname: Linux-3.16.5-gentoo-x86_64-Intel-R-_Pentium-R-_CPU_2020M_@ >> > _2.40GHz-with-gentoo-2.2 >> > KiB Mem: 3927272 total, 81700 free >> > KiB Swap: 2097148 total, 2096904 free >> > Timestamp of tree: Thu, 18 Dec 2014 17:15:01 +0000 >> > ld GNU ld (Gentoo 2.24 p1.4) 2.24 >> > app-shells/bash: 4.2_p53 >> > dev-lang/perl: 5.18.2-r2 >> > dev-lang/python: 2.7.7, 3.3.5-r1 >> > dev-util/pkgconfig: 0.28-r1 >> > sys-apps/baselayout: 2.2 >> > sys-apps/openrc: 0.12.4 >> > sys-apps/sandbox: 2.6-r1 >> > sys-devel/autoconf: 2.69 >> > sys-devel/automake: 1.13.4 >> > sys-devel/binutils: 2.24-r3 >> > sys-devel/gcc: 4.8.3 >> > sys-devel/gcc-config: 1.7.3 >> > sys-devel/libtool: 2.4.2-r1 >> > sys-devel/make: 4.0-r1 >> > sys-kernel/linux-headers: 3.16 (virtual/os-headers) >> > Repositories: gentoo >> > ACCEPT_LICENSE="*" >> > CBUILD="x86_64-pc-linux-gnu" >> > CFLAGS="-march=core-avx-i -O2 -pipe" >> > CHOST="x86_64-pc-linux-gnu" >> > CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt" >> > CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/gconf >> > /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc >> > /terminfo" >> > CXXFLAGS="-march=core-avx-i -O2 -pipe" >> > DISTDIR="/usr/portage/distfiles" >> > FCFLAGS="-O2 -pipe" >> > FEATURES="assume-digests binpkg-logs config-protect-if-modified >> distlocks >> > ebuild-locks fixlafiles merge-sync news parallel-fetch >> > preserve-libs protect-owned sandbox sfperms strict unknown-features-warn >> > unmerge-logs unmerge-orphans userfetch userpriv usersa >> > ndbox usersync" >> > FFLAGS="-O2 -pipe" >> > GENTOO_MIRRORS="rsync://gentoo.c3sl.ufpr.br/gentoo/ >> > http://gentoo.c3sl.ufpr.br/ ftp://gentoo.c3sl.ufpr.br/gentoo/ >> http://www.las >> > >> > .ic.unicamp.br/pub/gentoo/ ftp://ftp.las.ic.unicamp.br/pub/gentoo/" >> > LANG="es_VE.utf8" >> > LDFLAGS="-Wl,-O1 -Wl,--as-needed" >> > MAKEOPTS="-j1" >> > PKGDIR="/usr/portage/packages" >> > PORTAGE_CONFIGROOT="/" >> > PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times >> > --omit-dir-times --compress --force --whole-file --delete - >> > -stats --human-readable --timeout=180 --exclude=/distfiles >> --exclude=/local >> > --exclude=/packages" >> > PORTAGE_TMPDIR="/var/tmp" >> > PORTDIR="/usr/portage" >> > PORTDIR_OVERLAY="" >> > SYNC="rsync://rsync1.br.gentoo.org/gentoo-portage" >> > USE="acl amd64 berkdb bindist bzip2 cli cracklib crypt cxx dri fortran >> gdbm >> > iconv ipv6 mmx modules multilib multiuser ncurses nl >> > s nptl openmp pam pcre python readline session sse sse2 ssl systemd tcpd >> > unicode zlib" ABI_X86="64" ALSA_CARDS="intel" APACHE2_M >> > ODULES="authn_core authz_core socache_shmcb unixd actions alias >> auth_basic >> > authn_alias authn_anon authn_dbm authn_default authn_ >> > file authz_dbm authz_default authz_groupfile authz_host authz_owner >> > authz_user autoindex cache cgi cgid dav dav_fs dav_lock defl >> > ate dir disk_cache env expires ext_filter file_cache filter headers >> include >> > info log_config logio mem_cache mime mime_magic nego >> > tiation rewrite setenvif speling status unique_id userdir usertrack >> > vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets >> > stage tables krita karbon braindump author" CAMERAS="ptp2" >> > COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" E >> > LIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 >> garmin >> > garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oce >> > anserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip >> > tripmate tnt ublox ubx" INPUT_DEVICES="keyboard mouse e >> > vdev synaptics" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk >> > hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_E >> > XTENSIONS="presenter-console presenter-minimizer" LINGUAS="es" >> > OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-5" PYTHON_S >> > INGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_3" >> > RUBY_TARGETS="ruby19 ruby20" USERLAND="GNU" VIDEO_CARDS="intel" XT >> > ABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p >> iface >> > geoip fuzzy condition tee tarpit sysrq steal rawnat >> > logmark ipmark dhcpmac delude chaos account" >> > Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, >> > PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRES >> > S_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON >> > >> > >> > >> > >> > Muchas gracias por la ayuda que me puedan dar, ya que no he encontrado >> > referencia a esa version, trate de montar la r1, pero tambien me sale >> > error. >> > >> > >> >> >> -- >> Santiago López Denazis >> GNU/Linux SysAdmin >> sldenazis@linux.com >> Free your source, free your mind. >> ---- >> Por favor, no utilice formatos de archivo privativos para el intercambio >> de documentos, como DOC y XLS, sino HTML, PDF, TXT, CSV o cualquier otro >> que no obligue a utilizar un programa de un fabricante concreto. Vea >> http://www.gnu.org/philosophy/no-word-attachments.es.html >> -- >> >> > > > -- > > Freddy Taborda > Consultor Técnico > Valencia - Venezuela > GNU/Linux user #283478 > ECE #208825114 > > > What gets us into trouble is not what we don't know. It's what we know for > sure that just ain't so. > > Mark Twain > > "Those that can, do. Those that can’t, complain." > Linus Torvalds > [-- Attachment #2: Type: text/html, Size: 13455 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user-es] ERROR: dev-util/boost-build-1.55.0::gentoo failed 2014-12-19 15:49 ` KyD @ 2014-12-19 16:12 ` Freddy Taborda 2014-12-19 16:43 ` KyD 0 siblings, 1 reply; 14+ messages in thread From: Freddy Taborda @ 2014-12-19 16:12 UTC (permalink / raw To: gentoo-user-es [-- Attachment #1: Type: text/plain, Size: 12257 bytes --] Gracias KyD # cat /etc/portage/make.conf # These settings were set by the catalyst build script that automatically # built this stage. # Please consult /usr/share/portage/config/make.conf.example for a more # detailed example. CFLAGS="-march=core-avx-i -O2 -pipe" #CFLAGS="-O2 -pipe" CXXFLAGS="${CFLAGS}" # WARNING: Changing your CHOST is not something that should be done lightly. # Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing. CHOST="x86_64-pc-linux-gnu" # These are the USE flags that were used in addition to what is provided by the # profile used for building. USE="bindist mmx multiuser openrc sse sse2 symlink -systemd" PORTDIR="/usr/portage" DISTDIR="${PORTDIR}/distfiles" PKGDIR="${PORTDIR}/packages" MAKEOPTS="-j1" LINGUAS="es" ACCEPT_LICENSE="*" VIDEO_CARDS="intel" ALSA_CARDS="intel" INPUT_DEVICES="keyboard mouse evdev synaptics" GENTOO_MIRRORS="rsync://gentoo.c3sl.ufpr.br/gentoo/ http://gentoo.c3sl.ufpr.br/ ftp://gentoo.c3sl.ufpr.br/gentoo/ http://www.las.ic.unicamp.br/pub/gentoo/ ftp://ftp.las.ic.unicamp.br/pub/gentoo/" SYNC="rsync://rsync1.br.gentoo.org/gentoo-portage" Si necesitan algo mas de informacion por favor me avisan. Saludos 2014-12-19 11:19 GMT-04:30 KyD <kyd.is.back@gmail.com>: > cat make.conf > > 2014-12-19 12:32 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: > >> Santiago gracias por tus comentarios. >> >> Igual con el mismo problema. >> >> http://pastebin.com/AquYw1GA >> >> Alguna idea mas. >> >> Saludos >> >> 2014-12-19 9:25 GMT-04:30 Santiago López Denazis <sldenazis@linux.com>: >> >> On 12/18/2014 11:45 PM, Freddy Taborda wrote: >>> > Hola, hace mucho que no usaba Linux y mucho menos Gentoo, ya que no >>> tenia >>> > equipo, ahora estoy haciendo una nueva instalacion >>> > >>> http://terracenter.blogspot.com/2014/12/instalacion-de-gentoo-en-una-laptop.html >>> > (le falta mucho a este tuto para dejarlo decente), pero al momento de >>> > instalar lvm2 la compilacion me da estos errores >>> > >>> >>> Buenos días Freddy, si no es un problema para lo que necesitás, >>> intenta compilarlo con -python: >>> >>> echo dev-util/boost-build -python >> /etc/portage/package.use >>> >>> Saludos, >>> >>> > >>> > >>> > # emerge -pv lvm2 >>> > >>> > * IMPORTANT: 5 config files in '/etc/portage' need updating. >>> > * See the CONFIGURATION FILES section of the emerge >>> > * man page to learn how to update config files. >>> > >>> > These are the packages that would be merged, in order: >>> > >>> > Calculating dependencies... done! >>> > [ebuild N ] dev-util/boost-build-1.55.0 USE="python -examples {-test}" >>> 0 >>> > KiB >>> > [ebuild N ] virtual/libudev-215-r1:0/1 USE="systemd -static-libs" >>> > ABI_X86="(64) (-32) (-x32)" 0 KiB >>> > [ebuild N ] dev-libs/boost-1.55.0-r2:0/1.55.0 USE="nls python threads >>> > -context -debug -doc -icu -mpi -static-libs -tools" >>> > ABI_X86="(64) (-32) (-x32)" PYTHON_TARGETS="python2_7 python3_3 >>> -python3_4" >>> > 0 KiB >>> > [ebuild N ] sys-block/thin-provisioning-tools-0.3.2-r1 USE="{-test}" 0 >>> KiB >>> > [ebuild N ] sys-fs/lvm2-2.02.109 USE="readline systemd thin udev >>> (-clvm) >>> > (-cman) -device-mapper-only -lvm1 -lvm2create_ini >>> > trd (-selinux) -static -static-libs" 0 KiB >>> > >>> > >>> > >>> > * ERROR: dev-util/boost-build-1.55.0::gentoo failed (compile phase): >>> > * building bjam failed >>> > * >>> > * Call stack: >>> > * ebuild.sh, line 93: Called src_compile >>> > * environment, line 4955: Called die >>> > * The specific snippet of code: >>> > * CC=$(tc-getCC) ./build.sh ${toolset} -d+2 $(use_with python python >>> > "${EROOT}"/usr) || die "building bjam failed" >>> > * >>> > * If you need support, post the output of `emerge --info >>> > '=dev-util/boost-build-1.55.0::gentoo'`, >>> > * the complete build log and the output of `emerge -pqv >>> > '=dev-util/boost-build-1.55.0::gentoo'`. >>> > * The complete build log is located at >>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log'. >>> > * The ebuild environment file is located at >>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/environment'. >>> > * Working directory: >>> > >>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2/engine' >>> > * S: >>> > >>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2' >>> > >>> >>>> Failed to emerge dev-util/boost-build-1.55.0, Log file: >>> > >>> >>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log' >>> > >>> > * Messages for package dev-util/boost-build-1.55.0: >>> > >>> > * ERROR: dev-util/boost-build-1.55.0::gentoo failed (compile phase): >>> > * building bjam failed >>> > * >>> > * Call stack: >>> > * ebuild.sh, line 93: Called src_compile >>> > * environment, line 4955: Called die >>> > * The specific snippet of code: >>> > * CC=$(tc-getCC) ./build.sh ${toolset} -d+2 $(use_with python python >>> > "${EROOT}"/usr) || die "building bjam failed" >>> > * >>> > * If you need support, post the output of `emerge --info >>> > '=dev-util/boost-build-1.55.0::gentoo'`, >>> > * the complete build log and the output of `emerge -pqv >>> > '=dev-util/boost-build-1.55.0::gentoo'`. >>> > * The complete build log is located at >>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log'. >>> > * The ebuild environment file is located at >>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/environment'. >>> > * Working directory: >>> > >>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2/engine' >>> > * S: >>> > >>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2' >>> > livecd / # >>> > >>> > # emerge --info '=dev-libs/boost-1.55.0::gentoo' >>> > Portage 2.2.14 (python 2.7.7-final-0, default/linux/amd64/13.0, >>> gcc-4.8.3, >>> > glibc-2.19-r1, 3.16.5-gentoo x86_64) >>> > ================================================================= >>> > System Settings >>> > ================================================================= >>> > System uname: >>> Linux-3.16.5-gentoo-x86_64-Intel-R-_Pentium-R-_CPU_2020M_@ >>> > _2.40GHz-with-gentoo-2.2 >>> > KiB Mem: 3927272 total, 81700 free >>> > KiB Swap: 2097148 total, 2096904 free >>> > Timestamp of tree: Thu, 18 Dec 2014 17:15:01 +0000 >>> > ld GNU ld (Gentoo 2.24 p1.4) 2.24 >>> > app-shells/bash: 4.2_p53 >>> > dev-lang/perl: 5.18.2-r2 >>> > dev-lang/python: 2.7.7, 3.3.5-r1 >>> > dev-util/pkgconfig: 0.28-r1 >>> > sys-apps/baselayout: 2.2 >>> > sys-apps/openrc: 0.12.4 >>> > sys-apps/sandbox: 2.6-r1 >>> > sys-devel/autoconf: 2.69 >>> > sys-devel/automake: 1.13.4 >>> > sys-devel/binutils: 2.24-r3 >>> > sys-devel/gcc: 4.8.3 >>> > sys-devel/gcc-config: 1.7.3 >>> > sys-devel/libtool: 2.4.2-r1 >>> > sys-devel/make: 4.0-r1 >>> > sys-kernel/linux-headers: 3.16 (virtual/os-headers) >>> > Repositories: gentoo >>> > ACCEPT_LICENSE="*" >>> > CBUILD="x86_64-pc-linux-gnu" >>> > CFLAGS="-march=core-avx-i -O2 -pipe" >>> > CHOST="x86_64-pc-linux-gnu" >>> > CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt" >>> > CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/gconf >>> > /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc >>> > /terminfo" >>> > CXXFLAGS="-march=core-avx-i -O2 -pipe" >>> > DISTDIR="/usr/portage/distfiles" >>> > FCFLAGS="-O2 -pipe" >>> > FEATURES="assume-digests binpkg-logs config-protect-if-modified >>> distlocks >>> > ebuild-locks fixlafiles merge-sync news parallel-fetch >>> > preserve-libs protect-owned sandbox sfperms strict >>> unknown-features-warn >>> > unmerge-logs unmerge-orphans userfetch userpriv usersa >>> > ndbox usersync" >>> > FFLAGS="-O2 -pipe" >>> > GENTOO_MIRRORS="rsync://gentoo.c3sl.ufpr.br/gentoo/ >>> > http://gentoo.c3sl.ufpr.br/ ftp://gentoo.c3sl.ufpr.br/gentoo/ >>> http://www.las >>> > >>> > .ic.unicamp.br/pub/gentoo/ ftp://ftp.las.ic.unicamp.br/pub/gentoo/" >>> > LANG="es_VE.utf8" >>> > LDFLAGS="-Wl,-O1 -Wl,--as-needed" >>> > MAKEOPTS="-j1" >>> > PKGDIR="/usr/portage/packages" >>> > PORTAGE_CONFIGROOT="/" >>> > PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times >>> > --omit-dir-times --compress --force --whole-file --delete - >>> > -stats --human-readable --timeout=180 --exclude=/distfiles >>> --exclude=/local >>> > --exclude=/packages" >>> > PORTAGE_TMPDIR="/var/tmp" >>> > PORTDIR="/usr/portage" >>> > PORTDIR_OVERLAY="" >>> > SYNC="rsync://rsync1.br.gentoo.org/gentoo-portage" >>> > USE="acl amd64 berkdb bindist bzip2 cli cracklib crypt cxx dri fortran >>> gdbm >>> > iconv ipv6 mmx modules multilib multiuser ncurses nl >>> > s nptl openmp pam pcre python readline session sse sse2 ssl systemd >>> tcpd >>> > unicode zlib" ABI_X86="64" ALSA_CARDS="intel" APACHE2_M >>> > ODULES="authn_core authz_core socache_shmcb unixd actions alias >>> auth_basic >>> > authn_alias authn_anon authn_dbm authn_default authn_ >>> > file authz_dbm authz_default authz_groupfile authz_host authz_owner >>> > authz_user autoindex cache cgi cgid dav dav_fs dav_lock defl >>> > ate dir disk_cache env expires ext_filter file_cache filter headers >>> include >>> > info log_config logio mem_cache mime mime_magic nego >>> > tiation rewrite setenvif speling status unique_id userdir usertrack >>> > vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets >>> > stage tables krita karbon braindump author" CAMERAS="ptp2" >>> > COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" E >>> > LIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 >>> garmin >>> > garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oce >>> > anserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing >>> tsip >>> > tripmate tnt ublox ubx" INPUT_DEVICES="keyboard mouse e >>> > vdev synaptics" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk >>> > hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_E >>> > XTENSIONS="presenter-console presenter-minimizer" LINGUAS="es" >>> > OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-5" PYTHON_S >>> > INGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_3" >>> > RUBY_TARGETS="ruby19 ruby20" USERLAND="GNU" VIDEO_CARDS="intel" XT >>> > ABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p >>> iface >>> > geoip fuzzy condition tee tarpit sysrq steal rawnat >>> > logmark ipmark dhcpmac delude chaos account" >>> > Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, >>> > PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRES >>> > S_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON >>> > >>> > >>> > >>> > >>> > Muchas gracias por la ayuda que me puedan dar, ya que no he encontrado >>> > referencia a esa version, trate de montar la r1, pero tambien me sale >>> > error. >>> > >>> > >>> >>> >>> -- >>> Santiago López Denazis >>> GNU/Linux SysAdmin >>> sldenazis@linux.com >>> Free your source, free your mind. >>> ---- >>> Por favor, no utilice formatos de archivo privativos para el intercambio >>> de documentos, como DOC y XLS, sino HTML, PDF, TXT, CSV o cualquier otro >>> que no obligue a utilizar un programa de un fabricante concreto. Vea >>> http://www.gnu.org/philosophy/no-word-attachments.es.html >>> -- >>> >>> >> >> >> -- >> >> Freddy Taborda >> Consultor Técnico >> Valencia - Venezuela >> GNU/Linux user #283478 >> ECE #208825114 >> >> >> What gets us into trouble is not what we don't know. It's what we know >> for sure that just ain't so. >> >> Mark Twain >> >> "Those that can, do. Those that can’t, complain." >> Linus Torvalds >> > -- Freddy Taborda Consultor Técnico Valencia - Venezuela GNU/Linux user #283478 ECE #208825114 What gets us into trouble is not what we don't know. It's what we know for sure that just ain't so. Mark Twain "Those that can, do. Those that can’t, complain." Linus Torvalds [-- Attachment #2: Type: text/html, Size: 16776 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user-es] ERROR: dev-util/boost-build-1.55.0::gentoo failed 2014-12-19 16:12 ` Freddy Taborda @ 2014-12-19 16:43 ` KyD 2014-12-19 16:53 ` Freddy Taborda 0 siblings, 1 reply; 14+ messages in thread From: KyD @ 2014-12-19 16:43 UTC (permalink / raw To: gentoo-user-es [-- Attachment #1: Type: text/plain, Size: 12759 bytes --] Ok , ¿ que procesador tienes ? 2014-12-19 13:12 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: > > > Gracias KyD > > # cat /etc/portage/make.conf > # These settings were set by the catalyst build script that automatically > # built this stage. > # Please consult /usr/share/portage/config/make.conf.example for a more > # detailed example. > CFLAGS="-march=core-avx-i -O2 -pipe" > #CFLAGS="-O2 -pipe" > CXXFLAGS="${CFLAGS}" > # WARNING: Changing your CHOST is not something that should be done > lightly. > # Please consult http://www.gentoo.org/doc/en/change-chost.xml before > changing. > CHOST="x86_64-pc-linux-gnu" > # These are the USE flags that were used in addition to what is provided > by the > # profile used for building. > USE="bindist mmx multiuser openrc sse sse2 symlink -systemd" > PORTDIR="/usr/portage" > DISTDIR="${PORTDIR}/distfiles" > PKGDIR="${PORTDIR}/packages" > MAKEOPTS="-j1" > LINGUAS="es" > ACCEPT_LICENSE="*" > VIDEO_CARDS="intel" > ALSA_CARDS="intel" > INPUT_DEVICES="keyboard mouse evdev synaptics" > > > GENTOO_MIRRORS="rsync://gentoo.c3sl.ufpr.br/gentoo/ > http://gentoo.c3sl.ufpr.br/ ftp://gentoo.c3sl.ufpr.br/gentoo/ > http://www.las.ic.unicamp.br/pub/gentoo/ > ftp://ftp.las.ic.unicamp.br/pub/gentoo/" > > SYNC="rsync://rsync1.br.gentoo.org/gentoo-portage" > > > Si necesitan algo mas de informacion por favor me avisan. > > > Saludos > > 2014-12-19 11:19 GMT-04:30 KyD <kyd.is.back@gmail.com>: > > cat make.conf >> >> 2014-12-19 12:32 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: >> >>> Santiago gracias por tus comentarios. >>> >>> Igual con el mismo problema. >>> >>> http://pastebin.com/AquYw1GA >>> >>> Alguna idea mas. >>> >>> Saludos >>> >>> 2014-12-19 9:25 GMT-04:30 Santiago López Denazis <sldenazis@linux.com>: >>> >>> On 12/18/2014 11:45 PM, Freddy Taborda wrote: >>>> > Hola, hace mucho que no usaba Linux y mucho menos Gentoo, ya que no >>>> tenia >>>> > equipo, ahora estoy haciendo una nueva instalacion >>>> > >>>> http://terracenter.blogspot.com/2014/12/instalacion-de-gentoo-en-una-laptop.html >>>> > (le falta mucho a este tuto para dejarlo decente), pero al momento de >>>> > instalar lvm2 la compilacion me da estos errores >>>> > >>>> >>>> Buenos días Freddy, si no es un problema para lo que necesitás, >>>> intenta compilarlo con -python: >>>> >>>> echo dev-util/boost-build -python >> /etc/portage/package.use >>>> >>>> Saludos, >>>> >>>> > >>>> > >>>> > # emerge -pv lvm2 >>>> > >>>> > * IMPORTANT: 5 config files in '/etc/portage' need updating. >>>> > * See the CONFIGURATION FILES section of the emerge >>>> > * man page to learn how to update config files. >>>> > >>>> > These are the packages that would be merged, in order: >>>> > >>>> > Calculating dependencies... done! >>>> > [ebuild N ] dev-util/boost-build-1.55.0 USE="python -examples >>>> {-test}" 0 >>>> > KiB >>>> > [ebuild N ] virtual/libudev-215-r1:0/1 USE="systemd -static-libs" >>>> > ABI_X86="(64) (-32) (-x32)" 0 KiB >>>> > [ebuild N ] dev-libs/boost-1.55.0-r2:0/1.55.0 USE="nls python threads >>>> > -context -debug -doc -icu -mpi -static-libs -tools" >>>> > ABI_X86="(64) (-32) (-x32)" PYTHON_TARGETS="python2_7 python3_3 >>>> -python3_4" >>>> > 0 KiB >>>> > [ebuild N ] sys-block/thin-provisioning-tools-0.3.2-r1 USE="{-test}" >>>> 0 KiB >>>> > [ebuild N ] sys-fs/lvm2-2.02.109 USE="readline systemd thin udev >>>> (-clvm) >>>> > (-cman) -device-mapper-only -lvm1 -lvm2create_ini >>>> > trd (-selinux) -static -static-libs" 0 KiB >>>> > >>>> > >>>> > >>>> > * ERROR: dev-util/boost-build-1.55.0::gentoo failed (compile phase): >>>> > * building bjam failed >>>> > * >>>> > * Call stack: >>>> > * ebuild.sh, line 93: Called src_compile >>>> > * environment, line 4955: Called die >>>> > * The specific snippet of code: >>>> > * CC=$(tc-getCC) ./build.sh ${toolset} -d+2 $(use_with python python >>>> > "${EROOT}"/usr) || die "building bjam failed" >>>> > * >>>> > * If you need support, post the output of `emerge --info >>>> > '=dev-util/boost-build-1.55.0::gentoo'`, >>>> > * the complete build log and the output of `emerge -pqv >>>> > '=dev-util/boost-build-1.55.0::gentoo'`. >>>> > * The complete build log is located at >>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log'. >>>> > * The ebuild environment file is located at >>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/environment'. >>>> > * Working directory: >>>> > >>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2/engine' >>>> > * S: >>>> > >>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2' >>>> > >>>> >>>> Failed to emerge dev-util/boost-build-1.55.0, Log file: >>>> > >>>> >>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log' >>>> > >>>> > * Messages for package dev-util/boost-build-1.55.0: >>>> > >>>> > * ERROR: dev-util/boost-build-1.55.0::gentoo failed (compile phase): >>>> > * building bjam failed >>>> > * >>>> > * Call stack: >>>> > * ebuild.sh, line 93: Called src_compile >>>> > * environment, line 4955: Called die >>>> > * The specific snippet of code: >>>> > * CC=$(tc-getCC) ./build.sh ${toolset} -d+2 $(use_with python python >>>> > "${EROOT}"/usr) || die "building bjam failed" >>>> > * >>>> > * If you need support, post the output of `emerge --info >>>> > '=dev-util/boost-build-1.55.0::gentoo'`, >>>> > * the complete build log and the output of `emerge -pqv >>>> > '=dev-util/boost-build-1.55.0::gentoo'`. >>>> > * The complete build log is located at >>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log'. >>>> > * The ebuild environment file is located at >>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/environment'. >>>> > * Working directory: >>>> > >>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2/engine' >>>> > * S: >>>> > >>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2' >>>> > livecd / # >>>> > >>>> > # emerge --info '=dev-libs/boost-1.55.0::gentoo' >>>> > Portage 2.2.14 (python 2.7.7-final-0, default/linux/amd64/13.0, >>>> gcc-4.8.3, >>>> > glibc-2.19-r1, 3.16.5-gentoo x86_64) >>>> > ================================================================= >>>> > System Settings >>>> > ================================================================= >>>> > System uname: >>>> Linux-3.16.5-gentoo-x86_64-Intel-R-_Pentium-R-_CPU_2020M_@ >>>> > _2.40GHz-with-gentoo-2.2 >>>> > KiB Mem: 3927272 total, 81700 free >>>> > KiB Swap: 2097148 total, 2096904 free >>>> > Timestamp of tree: Thu, 18 Dec 2014 17:15:01 +0000 >>>> > ld GNU ld (Gentoo 2.24 p1.4) 2.24 >>>> > app-shells/bash: 4.2_p53 >>>> > dev-lang/perl: 5.18.2-r2 >>>> > dev-lang/python: 2.7.7, 3.3.5-r1 >>>> > dev-util/pkgconfig: 0.28-r1 >>>> > sys-apps/baselayout: 2.2 >>>> > sys-apps/openrc: 0.12.4 >>>> > sys-apps/sandbox: 2.6-r1 >>>> > sys-devel/autoconf: 2.69 >>>> > sys-devel/automake: 1.13.4 >>>> > sys-devel/binutils: 2.24-r3 >>>> > sys-devel/gcc: 4.8.3 >>>> > sys-devel/gcc-config: 1.7.3 >>>> > sys-devel/libtool: 2.4.2-r1 >>>> > sys-devel/make: 4.0-r1 >>>> > sys-kernel/linux-headers: 3.16 (virtual/os-headers) >>>> > Repositories: gentoo >>>> > ACCEPT_LICENSE="*" >>>> > CBUILD="x86_64-pc-linux-gnu" >>>> > CFLAGS="-march=core-avx-i -O2 -pipe" >>>> > CHOST="x86_64-pc-linux-gnu" >>>> > CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt" >>>> > CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/gconf >>>> > /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc >>>> > /terminfo" >>>> > CXXFLAGS="-march=core-avx-i -O2 -pipe" >>>> > DISTDIR="/usr/portage/distfiles" >>>> > FCFLAGS="-O2 -pipe" >>>> > FEATURES="assume-digests binpkg-logs config-protect-if-modified >>>> distlocks >>>> > ebuild-locks fixlafiles merge-sync news parallel-fetch >>>> > preserve-libs protect-owned sandbox sfperms strict >>>> unknown-features-warn >>>> > unmerge-logs unmerge-orphans userfetch userpriv usersa >>>> > ndbox usersync" >>>> > FFLAGS="-O2 -pipe" >>>> > GENTOO_MIRRORS="rsync://gentoo.c3sl.ufpr.br/gentoo/ >>>> > http://gentoo.c3sl.ufpr.br/ ftp://gentoo.c3sl.ufpr.br/gentoo/ >>>> http://www.las >>>> > >>>> > .ic.unicamp.br/pub/gentoo/ ftp://ftp.las.ic.unicamp.br/pub/gentoo/" >>>> > LANG="es_VE.utf8" >>>> > LDFLAGS="-Wl,-O1 -Wl,--as-needed" >>>> > MAKEOPTS="-j1" >>>> > PKGDIR="/usr/portage/packages" >>>> > PORTAGE_CONFIGROOT="/" >>>> > PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times >>>> > --omit-dir-times --compress --force --whole-file --delete - >>>> > -stats --human-readable --timeout=180 --exclude=/distfiles >>>> --exclude=/local >>>> > --exclude=/packages" >>>> > PORTAGE_TMPDIR="/var/tmp" >>>> > PORTDIR="/usr/portage" >>>> > PORTDIR_OVERLAY="" >>>> > SYNC="rsync://rsync1.br.gentoo.org/gentoo-portage" >>>> > USE="acl amd64 berkdb bindist bzip2 cli cracklib crypt cxx dri >>>> fortran gdbm >>>> > iconv ipv6 mmx modules multilib multiuser ncurses nl >>>> > s nptl openmp pam pcre python readline session sse sse2 ssl systemd >>>> tcpd >>>> > unicode zlib" ABI_X86="64" ALSA_CARDS="intel" APACHE2_M >>>> > ODULES="authn_core authz_core socache_shmcb unixd actions alias >>>> auth_basic >>>> > authn_alias authn_anon authn_dbm authn_default authn_ >>>> > file authz_dbm authz_default authz_groupfile authz_host authz_owner >>>> > authz_user autoindex cache cgi cgid dav dav_fs dav_lock defl >>>> > ate dir disk_cache env expires ext_filter file_cache filter headers >>>> include >>>> > info log_config logio mem_cache mime mime_magic nego >>>> > tiation rewrite setenvif speling status unique_id userdir usertrack >>>> > vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets >>>> > stage tables krita karbon braindump author" CAMERAS="ptp2" >>>> > COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" E >>>> > LIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 >>>> garmin >>>> > garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oce >>>> > anserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing >>>> tsip >>>> > tripmate tnt ublox ubx" INPUT_DEVICES="keyboard mouse e >>>> > vdev synaptics" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 >>>> glk >>>> > hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_E >>>> > XTENSIONS="presenter-console presenter-minimizer" LINGUAS="es" >>>> > OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-5" PYTHON_S >>>> > INGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_3" >>>> > RUBY_TARGETS="ruby19 ruby20" USERLAND="GNU" VIDEO_CARDS="intel" XT >>>> > ABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p >>>> iface >>>> > geoip fuzzy condition tee tarpit sysrq steal rawnat >>>> > logmark ipmark dhcpmac delude chaos account" >>>> > Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, >>>> > PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRES >>>> > S_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON >>>> > >>>> > >>>> > >>>> > >>>> > Muchas gracias por la ayuda que me puedan dar, ya que no he encontrado >>>> > referencia a esa version, trate de montar la r1, pero tambien me sale >>>> > error. >>>> > >>>> > >>>> >>>> >>>> -- >>>> Santiago López Denazis >>>> GNU/Linux SysAdmin >>>> sldenazis@linux.com >>>> Free your source, free your mind. >>>> ---- >>>> Por favor, no utilice formatos de archivo privativos para el intercambio >>>> de documentos, como DOC y XLS, sino HTML, PDF, TXT, CSV o cualquier otro >>>> que no obligue a utilizar un programa de un fabricante concreto. Vea >>>> http://www.gnu.org/philosophy/no-word-attachments.es.html >>>> -- >>>> >>>> >>> >>> >>> -- >>> >>> Freddy Taborda >>> Consultor Técnico >>> Valencia - Venezuela >>> GNU/Linux user #283478 >>> ECE #208825114 >>> >>> >>> What gets us into trouble is not what we don't know. It's what we know >>> for sure that just ain't so. >>> >>> Mark Twain >>> >>> "Those that can, do. Those that can’t, complain." >>> Linus Torvalds >>> >> > > > -- > > Freddy Taborda > Consultor Técnico > Valencia - Venezuela > GNU/Linux user #283478 > ECE #208825114 > > > What gets us into trouble is not what we don't know. It's what we know for > sure that just ain't so. > > Mark Twain > > "Those that can, do. Those that can’t, complain." > Linus Torvalds > [-- Attachment #2: Type: text/html, Size: 17343 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user-es] ERROR: dev-util/boost-build-1.55.0::gentoo failed 2014-12-19 16:43 ` KyD @ 2014-12-19 16:53 ` Freddy Taborda 2014-12-19 17:03 ` KyD 0 siblings, 1 reply; 14+ messages in thread From: Freddy Taborda @ 2014-12-19 16:53 UTC (permalink / raw To: gentoo-user-es [-- Attachment #1: Type: text/plain, Size: 15794 bytes --] cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 58 model name : Intel(R) Pentium(R) CPU 2020M @ 2.40GHz stepping : 9 microcode : 0x19 cpu MHz : 2400.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave lahf_lm arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms bogomips : 4789.09 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 58 model name : Intel(R) Pentium(R) CPU 2020M @ 2.40GHz stepping : 9 microcode : 0x19 cpu MHz : 2400.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 2 initial apicid : 2 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave lahf_lm arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms bogomips : 4789.09 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: Saludos 2014-12-19 12:13 GMT-04:30 KyD <kyd.is.back@gmail.com>: > Ok , > > ¿ que procesador tienes ? > > 2014-12-19 13:12 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: > >> >> Gracias KyD >> >> # cat /etc/portage/make.conf >> # These settings were set by the catalyst build script that automatically >> # built this stage. >> # Please consult /usr/share/portage/config/make.conf.example for a more >> # detailed example. >> CFLAGS="-march=core-avx-i -O2 -pipe" >> #CFLAGS="-O2 -pipe" >> CXXFLAGS="${CFLAGS}" >> # WARNING: Changing your CHOST is not something that should be done >> lightly. >> # Please consult http://www.gentoo.org/doc/en/change-chost.xml before >> changing. >> CHOST="x86_64-pc-linux-gnu" >> # These are the USE flags that were used in addition to what is provided >> by the >> # profile used for building. >> USE="bindist mmx multiuser openrc sse sse2 symlink -systemd" >> PORTDIR="/usr/portage" >> DISTDIR="${PORTDIR}/distfiles" >> PKGDIR="${PORTDIR}/packages" >> MAKEOPTS="-j1" >> LINGUAS="es" >> ACCEPT_LICENSE="*" >> VIDEO_CARDS="intel" >> ALSA_CARDS="intel" >> INPUT_DEVICES="keyboard mouse evdev synaptics" >> >> >> GENTOO_MIRRORS="rsync://gentoo.c3sl.ufpr.br/gentoo/ >> http://gentoo.c3sl.ufpr.br/ ftp://gentoo.c3sl.ufpr.br/gentoo/ >> http://www.las.ic.unicamp.br/pub/gentoo/ >> ftp://ftp.las.ic.unicamp.br/pub/gentoo/" >> >> SYNC="rsync://rsync1.br.gentoo.org/gentoo-portage" >> >> >> Si necesitan algo mas de informacion por favor me avisan. >> >> >> Saludos >> >> 2014-12-19 11:19 GMT-04:30 KyD <kyd.is.back@gmail.com>: >> >> cat make.conf >>> >>> 2014-12-19 12:32 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: >>> >>>> Santiago gracias por tus comentarios. >>>> >>>> Igual con el mismo problema. >>>> >>>> http://pastebin.com/AquYw1GA >>>> >>>> Alguna idea mas. >>>> >>>> Saludos >>>> >>>> 2014-12-19 9:25 GMT-04:30 Santiago López Denazis <sldenazis@linux.com>: >>>> >>>> On 12/18/2014 11:45 PM, Freddy Taborda wrote: >>>>> > Hola, hace mucho que no usaba Linux y mucho menos Gentoo, ya que no >>>>> tenia >>>>> > equipo, ahora estoy haciendo una nueva instalacion >>>>> > >>>>> http://terracenter.blogspot.com/2014/12/instalacion-de-gentoo-en-una-laptop.html >>>>> > (le falta mucho a este tuto para dejarlo decente), pero al momento de >>>>> > instalar lvm2 la compilacion me da estos errores >>>>> > >>>>> >>>>> Buenos días Freddy, si no es un problema para lo que necesitás, >>>>> intenta compilarlo con -python: >>>>> >>>>> echo dev-util/boost-build -python >> /etc/portage/package.use >>>>> >>>>> Saludos, >>>>> >>>>> > >>>>> > >>>>> > # emerge -pv lvm2 >>>>> > >>>>> > * IMPORTANT: 5 config files in '/etc/portage' need updating. >>>>> > * See the CONFIGURATION FILES section of the emerge >>>>> > * man page to learn how to update config files. >>>>> > >>>>> > These are the packages that would be merged, in order: >>>>> > >>>>> > Calculating dependencies... done! >>>>> > [ebuild N ] dev-util/boost-build-1.55.0 USE="python -examples >>>>> {-test}" 0 >>>>> > KiB >>>>> > [ebuild N ] virtual/libudev-215-r1:0/1 USE="systemd -static-libs" >>>>> > ABI_X86="(64) (-32) (-x32)" 0 KiB >>>>> > [ebuild N ] dev-libs/boost-1.55.0-r2:0/1.55.0 USE="nls python threads >>>>> > -context -debug -doc -icu -mpi -static-libs -tools" >>>>> > ABI_X86="(64) (-32) (-x32)" PYTHON_TARGETS="python2_7 python3_3 >>>>> -python3_4" >>>>> > 0 KiB >>>>> > [ebuild N ] sys-block/thin-provisioning-tools-0.3.2-r1 USE="{-test}" >>>>> 0 KiB >>>>> > [ebuild N ] sys-fs/lvm2-2.02.109 USE="readline systemd thin udev >>>>> (-clvm) >>>>> > (-cman) -device-mapper-only -lvm1 -lvm2create_ini >>>>> > trd (-selinux) -static -static-libs" 0 KiB >>>>> > >>>>> > >>>>> > >>>>> > * ERROR: dev-util/boost-build-1.55.0::gentoo failed (compile phase): >>>>> > * building bjam failed >>>>> > * >>>>> > * Call stack: >>>>> > * ebuild.sh, line 93: Called src_compile >>>>> > * environment, line 4955: Called die >>>>> > * The specific snippet of code: >>>>> > * CC=$(tc-getCC) ./build.sh ${toolset} -d+2 $(use_with python python >>>>> > "${EROOT}"/usr) || die "building bjam failed" >>>>> > * >>>>> > * If you need support, post the output of `emerge --info >>>>> > '=dev-util/boost-build-1.55.0::gentoo'`, >>>>> > * the complete build log and the output of `emerge -pqv >>>>> > '=dev-util/boost-build-1.55.0::gentoo'`. >>>>> > * The complete build log is located at >>>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log'. >>>>> > * The ebuild environment file is located at >>>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/environment'. >>>>> > * Working directory: >>>>> > >>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2/engine' >>>>> > * S: >>>>> > >>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2' >>>>> > >>>>> >>>> Failed to emerge dev-util/boost-build-1.55.0, Log file: >>>>> > >>>>> >>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log' >>>>> > >>>>> > * Messages for package dev-util/boost-build-1.55.0: >>>>> > >>>>> > * ERROR: dev-util/boost-build-1.55.0::gentoo failed (compile phase): >>>>> > * building bjam failed >>>>> > * >>>>> > * Call stack: >>>>> > * ebuild.sh, line 93: Called src_compile >>>>> > * environment, line 4955: Called die >>>>> > * The specific snippet of code: >>>>> > * CC=$(tc-getCC) ./build.sh ${toolset} -d+2 $(use_with python python >>>>> > "${EROOT}"/usr) || die "building bjam failed" >>>>> > * >>>>> > * If you need support, post the output of `emerge --info >>>>> > '=dev-util/boost-build-1.55.0::gentoo'`, >>>>> > * the complete build log and the output of `emerge -pqv >>>>> > '=dev-util/boost-build-1.55.0::gentoo'`. >>>>> > * The complete build log is located at >>>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log'. >>>>> > * The ebuild environment file is located at >>>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/environment'. >>>>> > * Working directory: >>>>> > >>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2/engine' >>>>> > * S: >>>>> > >>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2' >>>>> > livecd / # >>>>> > >>>>> > # emerge --info '=dev-libs/boost-1.55.0::gentoo' >>>>> > Portage 2.2.14 (python 2.7.7-final-0, default/linux/amd64/13.0, >>>>> gcc-4.8.3, >>>>> > glibc-2.19-r1, 3.16.5-gentoo x86_64) >>>>> > ================================================================= >>>>> > System Settings >>>>> > ================================================================= >>>>> > System uname: >>>>> Linux-3.16.5-gentoo-x86_64-Intel-R-_Pentium-R-_CPU_2020M_@ >>>>> > _2.40GHz-with-gentoo-2.2 >>>>> > KiB Mem: 3927272 total, 81700 free >>>>> > KiB Swap: 2097148 total, 2096904 free >>>>> > Timestamp of tree: Thu, 18 Dec 2014 17:15:01 +0000 >>>>> > ld GNU ld (Gentoo 2.24 p1.4) 2.24 >>>>> > app-shells/bash: 4.2_p53 >>>>> > dev-lang/perl: 5.18.2-r2 >>>>> > dev-lang/python: 2.7.7, 3.3.5-r1 >>>>> > dev-util/pkgconfig: 0.28-r1 >>>>> > sys-apps/baselayout: 2.2 >>>>> > sys-apps/openrc: 0.12.4 >>>>> > sys-apps/sandbox: 2.6-r1 >>>>> > sys-devel/autoconf: 2.69 >>>>> > sys-devel/automake: 1.13.4 >>>>> > sys-devel/binutils: 2.24-r3 >>>>> > sys-devel/gcc: 4.8.3 >>>>> > sys-devel/gcc-config: 1.7.3 >>>>> > sys-devel/libtool: 2.4.2-r1 >>>>> > sys-devel/make: 4.0-r1 >>>>> > sys-kernel/linux-headers: 3.16 (virtual/os-headers) >>>>> > Repositories: gentoo >>>>> > ACCEPT_LICENSE="*" >>>>> > CBUILD="x86_64-pc-linux-gnu" >>>>> > CFLAGS="-march=core-avx-i -O2 -pipe" >>>>> > CHOST="x86_64-pc-linux-gnu" >>>>> > CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt" >>>>> > CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/gconf >>>>> > /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc >>>>> > /terminfo" >>>>> > CXXFLAGS="-march=core-avx-i -O2 -pipe" >>>>> > DISTDIR="/usr/portage/distfiles" >>>>> > FCFLAGS="-O2 -pipe" >>>>> > FEATURES="assume-digests binpkg-logs config-protect-if-modified >>>>> distlocks >>>>> > ebuild-locks fixlafiles merge-sync news parallel-fetch >>>>> > preserve-libs protect-owned sandbox sfperms strict >>>>> unknown-features-warn >>>>> > unmerge-logs unmerge-orphans userfetch userpriv usersa >>>>> > ndbox usersync" >>>>> > FFLAGS="-O2 -pipe" >>>>> > GENTOO_MIRRORS="rsync://gentoo.c3sl.ufpr.br/gentoo/ >>>>> > http://gentoo.c3sl.ufpr.br/ ftp://gentoo.c3sl.ufpr.br/gentoo/ >>>>> http://www.las >>>>> > >>>>> > .ic.unicamp.br/pub/gentoo/ ftp://ftp.las.ic.unicamp.br/pub/gentoo/" >>>>> > LANG="es_VE.utf8" >>>>> > LDFLAGS="-Wl,-O1 -Wl,--as-needed" >>>>> > MAKEOPTS="-j1" >>>>> > PKGDIR="/usr/portage/packages" >>>>> > PORTAGE_CONFIGROOT="/" >>>>> > PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times >>>>> > --omit-dir-times --compress --force --whole-file --delete - >>>>> > -stats --human-readable --timeout=180 --exclude=/distfiles >>>>> --exclude=/local >>>>> > --exclude=/packages" >>>>> > PORTAGE_TMPDIR="/var/tmp" >>>>> > PORTDIR="/usr/portage" >>>>> > PORTDIR_OVERLAY="" >>>>> > SYNC="rsync://rsync1.br.gentoo.org/gentoo-portage" >>>>> > USE="acl amd64 berkdb bindist bzip2 cli cracklib crypt cxx dri >>>>> fortran gdbm >>>>> > iconv ipv6 mmx modules multilib multiuser ncurses nl >>>>> > s nptl openmp pam pcre python readline session sse sse2 ssl systemd >>>>> tcpd >>>>> > unicode zlib" ABI_X86="64" ALSA_CARDS="intel" APACHE2_M >>>>> > ODULES="authn_core authz_core socache_shmcb unixd actions alias >>>>> auth_basic >>>>> > authn_alias authn_anon authn_dbm authn_default authn_ >>>>> > file authz_dbm authz_default authz_groupfile authz_host authz_owner >>>>> > authz_user autoindex cache cgi cgid dav dav_fs dav_lock defl >>>>> > ate dir disk_cache env expires ext_filter file_cache filter headers >>>>> include >>>>> > info log_config logio mem_cache mime mime_magic nego >>>>> > tiation rewrite setenvif speling status unique_id userdir usertrack >>>>> > vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets >>>>> > stage tables krita karbon braindump author" CAMERAS="ptp2" >>>>> > COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" E >>>>> > LIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 >>>>> garmin >>>>> > garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oce >>>>> > anserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing >>>>> tsip >>>>> > tripmate tnt ublox ubx" INPUT_DEVICES="keyboard mouse e >>>>> > vdev synaptics" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 >>>>> glk >>>>> > hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_E >>>>> > XTENSIONS="presenter-console presenter-minimizer" LINGUAS="es" >>>>> > OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-5" PYTHON_S >>>>> > INGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_3" >>>>> > RUBY_TARGETS="ruby19 ruby20" USERLAND="GNU" VIDEO_CARDS="intel" XT >>>>> > ABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset >>>>> ipp2p iface >>>>> > geoip fuzzy condition tee tarpit sysrq steal rawnat >>>>> > logmark ipmark dhcpmac delude chaos account" >>>>> > Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, >>>>> > PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRES >>>>> > S_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > Muchas gracias por la ayuda que me puedan dar, ya que no he >>>>> encontrado >>>>> > referencia a esa version, trate de montar la r1, pero tambien me sale >>>>> > error. >>>>> > >>>>> > >>>>> >>>>> >>>>> -- >>>>> Santiago López Denazis >>>>> GNU/Linux SysAdmin >>>>> sldenazis@linux.com >>>>> Free your source, free your mind. >>>>> ---- >>>>> Por favor, no utilice formatos de archivo privativos para el >>>>> intercambio >>>>> de documentos, como DOC y XLS, sino HTML, PDF, TXT, CSV o cualquier >>>>> otro >>>>> que no obligue a utilizar un programa de un fabricante concreto. Vea >>>>> http://www.gnu.org/philosophy/no-word-attachments.es.html >>>>> -- >>>>> >>>>> >>>> >>>> >>>> -- >>>> >>>> Freddy Taborda >>>> Consultor Técnico >>>> Valencia - Venezuela >>>> GNU/Linux user #283478 >>>> ECE #208825114 >>>> >>>> >>>> What gets us into trouble is not what we don't know. It's what we know >>>> for sure that just ain't so. >>>> >>>> Mark Twain >>>> >>>> "Those that can, do. Those that can’t, complain." >>>> Linus Torvalds >>>> >>> >> >> >> -- >> >> Freddy Taborda >> Consultor Técnico >> Valencia - Venezuela >> GNU/Linux user #283478 >> ECE #208825114 >> >> >> What gets us into trouble is not what we don't know. It's what we know >> for sure that just ain't so. >> >> Mark Twain >> >> "Those that can, do. Those that can’t, complain." >> Linus Torvalds >> > -- Freddy Taborda Consultor Técnico Valencia - Venezuela GNU/Linux user #283478 ECE #208825114 What gets us into trouble is not what we don't know. It's what we know for sure that just ain't so. Mark Twain "Those that can, do. Those that can’t, complain." Linus Torvalds [-- Attachment #2: Type: text/html, Size: 21283 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user-es] ERROR: dev-util/boost-build-1.55.0::gentoo failed 2014-12-19 16:53 ` Freddy Taborda @ 2014-12-19 17:03 ` KyD 2014-12-19 18:17 ` Freddy Taborda 0 siblings, 1 reply; 14+ messages in thread From: KyD @ 2014-12-19 17:03 UTC (permalink / raw To: gentoo-user-es [-- Attachment #1: Type: text/plain, Size: 16691 bytes --] Prueba lo siguiente : 1 ) export CFLAGS="-march=core-avx-i -mno-avx -mno-aes -mno-rdrnd -O2 -pipe" 2 ) emerge --info | grep -i cflags (Esto es a modo de chequeo para ver que se seteo bien CFLAGS) Si quedo bien seteada : 3) emerge -v dev-util/boost-build 2014-12-19 13:53 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: > > cat /proc/cpuinfo > processor : 0 > vendor_id : GenuineIntel > cpu family : 6 > model : 58 > model name : Intel(R) Pentium(R) CPU 2020M @ 2.40GHz > stepping : 9 > microcode : 0x19 > cpu MHz : 2400.000 > cache size : 2048 KB > physical id : 0 > siblings : 2 > core id : 0 > cpu cores : 2 > apicid : 0 > initial apicid : 0 > fpu : yes > fpu_exception : yes > cpuid level : 13 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca > cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx > rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology > nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est > tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt > tsc_deadline_timer xsave lahf_lm arat epb xsaveopt pln pts dtherm > tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms > bogomips : 4789.09 > clflush size : 64 > cache_alignment : 64 > address sizes : 36 bits physical, 48 bits virtual > power management: > > processor : 1 > vendor_id : GenuineIntel > cpu family : 6 > model : 58 > model name : Intel(R) Pentium(R) CPU 2020M @ 2.40GHz > stepping : 9 > microcode : 0x19 > cpu MHz : 2400.000 > cache size : 2048 KB > physical id : 0 > siblings : 2 > core id : 1 > cpu cores : 2 > apicid : 2 > initial apicid : 2 > fpu : yes > fpu_exception : yes > cpuid level : 13 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca > cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx > rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology > nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est > tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt > tsc_deadline_timer xsave lahf_lm arat epb xsaveopt pln pts dtherm > tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms > bogomips : 4789.09 > clflush size : 64 > cache_alignment : 64 > address sizes : 36 bits physical, 48 bits virtual > power management: > > > Saludos > > 2014-12-19 12:13 GMT-04:30 KyD <kyd.is.back@gmail.com>: > > Ok , >> >> ¿ que procesador tienes ? >> >> 2014-12-19 13:12 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: >> >>> >>> Gracias KyD >>> >>> # cat /etc/portage/make.conf >>> # These settings were set by the catalyst build script that automatically >>> # built this stage. >>> # Please consult /usr/share/portage/config/make.conf.example for a more >>> # detailed example. >>> CFLAGS="-march=core-avx-i -O2 -pipe" >>> #CFLAGS="-O2 -pipe" >>> CXXFLAGS="${CFLAGS}" >>> # WARNING: Changing your CHOST is not something that should be done >>> lightly. >>> # Please consult http://www.gentoo.org/doc/en/change-chost.xml before >>> changing. >>> CHOST="x86_64-pc-linux-gnu" >>> # These are the USE flags that were used in addition to what is provided >>> by the >>> # profile used for building. >>> USE="bindist mmx multiuser openrc sse sse2 symlink -systemd" >>> PORTDIR="/usr/portage" >>> DISTDIR="${PORTDIR}/distfiles" >>> PKGDIR="${PORTDIR}/packages" >>> MAKEOPTS="-j1" >>> LINGUAS="es" >>> ACCEPT_LICENSE="*" >>> VIDEO_CARDS="intel" >>> ALSA_CARDS="intel" >>> INPUT_DEVICES="keyboard mouse evdev synaptics" >>> >>> >>> GENTOO_MIRRORS="rsync://gentoo.c3sl.ufpr.br/gentoo/ >>> http://gentoo.c3sl.ufpr.br/ ftp://gentoo.c3sl.ufpr.br/gentoo/ >>> http://www.las.ic.unicamp.br/pub/gentoo/ >>> ftp://ftp.las.ic.unicamp.br/pub/gentoo/" >>> >>> SYNC="rsync://rsync1.br.gentoo.org/gentoo-portage" >>> >>> >>> Si necesitan algo mas de informacion por favor me avisan. >>> >>> >>> Saludos >>> >>> 2014-12-19 11:19 GMT-04:30 KyD <kyd.is.back@gmail.com>: >>> >>> cat make.conf >>>> >>>> 2014-12-19 12:32 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: >>>> >>>>> Santiago gracias por tus comentarios. >>>>> >>>>> Igual con el mismo problema. >>>>> >>>>> http://pastebin.com/AquYw1GA >>>>> >>>>> Alguna idea mas. >>>>> >>>>> Saludos >>>>> >>>>> 2014-12-19 9:25 GMT-04:30 Santiago López Denazis <sldenazis@linux.com> >>>>> : >>>>> >>>>> On 12/18/2014 11:45 PM, Freddy Taborda wrote: >>>>>> > Hola, hace mucho que no usaba Linux y mucho menos Gentoo, ya que no >>>>>> tenia >>>>>> > equipo, ahora estoy haciendo una nueva instalacion >>>>>> > >>>>>> http://terracenter.blogspot.com/2014/12/instalacion-de-gentoo-en-una-laptop.html >>>>>> > (le falta mucho a este tuto para dejarlo decente), pero al momento >>>>>> de >>>>>> > instalar lvm2 la compilacion me da estos errores >>>>>> > >>>>>> >>>>>> Buenos días Freddy, si no es un problema para lo que necesitás, >>>>>> intenta compilarlo con -python: >>>>>> >>>>>> echo dev-util/boost-build -python >> /etc/portage/package.use >>>>>> >>>>>> Saludos, >>>>>> >>>>>> > >>>>>> > >>>>>> > # emerge -pv lvm2 >>>>>> > >>>>>> > * IMPORTANT: 5 config files in '/etc/portage' need updating. >>>>>> > * See the CONFIGURATION FILES section of the emerge >>>>>> > * man page to learn how to update config files. >>>>>> > >>>>>> > These are the packages that would be merged, in order: >>>>>> > >>>>>> > Calculating dependencies... done! >>>>>> > [ebuild N ] dev-util/boost-build-1.55.0 USE="python -examples >>>>>> {-test}" 0 >>>>>> > KiB >>>>>> > [ebuild N ] virtual/libudev-215-r1:0/1 USE="systemd -static-libs" >>>>>> > ABI_X86="(64) (-32) (-x32)" 0 KiB >>>>>> > [ebuild N ] dev-libs/boost-1.55.0-r2:0/1.55.0 USE="nls python >>>>>> threads >>>>>> > -context -debug -doc -icu -mpi -static-libs -tools" >>>>>> > ABI_X86="(64) (-32) (-x32)" PYTHON_TARGETS="python2_7 python3_3 >>>>>> -python3_4" >>>>>> > 0 KiB >>>>>> > [ebuild N ] sys-block/thin-provisioning-tools-0.3.2-r1 >>>>>> USE="{-test}" 0 KiB >>>>>> > [ebuild N ] sys-fs/lvm2-2.02.109 USE="readline systemd thin udev >>>>>> (-clvm) >>>>>> > (-cman) -device-mapper-only -lvm1 -lvm2create_ini >>>>>> > trd (-selinux) -static -static-libs" 0 KiB >>>>>> > >>>>>> > >>>>>> > >>>>>> > * ERROR: dev-util/boost-build-1.55.0::gentoo failed (compile phase): >>>>>> > * building bjam failed >>>>>> > * >>>>>> > * Call stack: >>>>>> > * ebuild.sh, line 93: Called src_compile >>>>>> > * environment, line 4955: Called die >>>>>> > * The specific snippet of code: >>>>>> > * CC=$(tc-getCC) ./build.sh ${toolset} -d+2 $(use_with python python >>>>>> > "${EROOT}"/usr) || die "building bjam failed" >>>>>> > * >>>>>> > * If you need support, post the output of `emerge --info >>>>>> > '=dev-util/boost-build-1.55.0::gentoo'`, >>>>>> > * the complete build log and the output of `emerge -pqv >>>>>> > '=dev-util/boost-build-1.55.0::gentoo'`. >>>>>> > * The complete build log is located at >>>>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log'. >>>>>> > * The ebuild environment file is located at >>>>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/environment'. >>>>>> > * Working directory: >>>>>> > >>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2/engine' >>>>>> > * S: >>>>>> > >>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2' >>>>>> > >>>>>> >>>> Failed to emerge dev-util/boost-build-1.55.0, Log file: >>>>>> > >>>>>> >>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log' >>>>>> > >>>>>> > * Messages for package dev-util/boost-build-1.55.0: >>>>>> > >>>>>> > * ERROR: dev-util/boost-build-1.55.0::gentoo failed (compile phase): >>>>>> > * building bjam failed >>>>>> > * >>>>>> > * Call stack: >>>>>> > * ebuild.sh, line 93: Called src_compile >>>>>> > * environment, line 4955: Called die >>>>>> > * The specific snippet of code: >>>>>> > * CC=$(tc-getCC) ./build.sh ${toolset} -d+2 $(use_with python python >>>>>> > "${EROOT}"/usr) || die "building bjam failed" >>>>>> > * >>>>>> > * If you need support, post the output of `emerge --info >>>>>> > '=dev-util/boost-build-1.55.0::gentoo'`, >>>>>> > * the complete build log and the output of `emerge -pqv >>>>>> > '=dev-util/boost-build-1.55.0::gentoo'`. >>>>>> > * The complete build log is located at >>>>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log'. >>>>>> > * The ebuild environment file is located at >>>>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/environment'. >>>>>> > * Working directory: >>>>>> > >>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2/engine' >>>>>> > * S: >>>>>> > >>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2' >>>>>> > livecd / # >>>>>> > >>>>>> > # emerge --info '=dev-libs/boost-1.55.0::gentoo' >>>>>> > Portage 2.2.14 (python 2.7.7-final-0, default/linux/amd64/13.0, >>>>>> gcc-4.8.3, >>>>>> > glibc-2.19-r1, 3.16.5-gentoo x86_64) >>>>>> > ================================================================= >>>>>> > System Settings >>>>>> > ================================================================= >>>>>> > System uname: >>>>>> Linux-3.16.5-gentoo-x86_64-Intel-R-_Pentium-R-_CPU_2020M_@ >>>>>> > _2.40GHz-with-gentoo-2.2 >>>>>> > KiB Mem: 3927272 total, 81700 free >>>>>> > KiB Swap: 2097148 total, 2096904 free >>>>>> > Timestamp of tree: Thu, 18 Dec 2014 17:15:01 +0000 >>>>>> > ld GNU ld (Gentoo 2.24 p1.4) 2.24 >>>>>> > app-shells/bash: 4.2_p53 >>>>>> > dev-lang/perl: 5.18.2-r2 >>>>>> > dev-lang/python: 2.7.7, 3.3.5-r1 >>>>>> > dev-util/pkgconfig: 0.28-r1 >>>>>> > sys-apps/baselayout: 2.2 >>>>>> > sys-apps/openrc: 0.12.4 >>>>>> > sys-apps/sandbox: 2.6-r1 >>>>>> > sys-devel/autoconf: 2.69 >>>>>> > sys-devel/automake: 1.13.4 >>>>>> > sys-devel/binutils: 2.24-r3 >>>>>> > sys-devel/gcc: 4.8.3 >>>>>> > sys-devel/gcc-config: 1.7.3 >>>>>> > sys-devel/libtool: 2.4.2-r1 >>>>>> > sys-devel/make: 4.0-r1 >>>>>> > sys-kernel/linux-headers: 3.16 (virtual/os-headers) >>>>>> > Repositories: gentoo >>>>>> > ACCEPT_LICENSE="*" >>>>>> > CBUILD="x86_64-pc-linux-gnu" >>>>>> > CFLAGS="-march=core-avx-i -O2 -pipe" >>>>>> > CHOST="x86_64-pc-linux-gnu" >>>>>> > CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt" >>>>>> > CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/gconf >>>>>> > /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc >>>>>> > /terminfo" >>>>>> > CXXFLAGS="-march=core-avx-i -O2 -pipe" >>>>>> > DISTDIR="/usr/portage/distfiles" >>>>>> > FCFLAGS="-O2 -pipe" >>>>>> > FEATURES="assume-digests binpkg-logs config-protect-if-modified >>>>>> distlocks >>>>>> > ebuild-locks fixlafiles merge-sync news parallel-fetch >>>>>> > preserve-libs protect-owned sandbox sfperms strict >>>>>> unknown-features-warn >>>>>> > unmerge-logs unmerge-orphans userfetch userpriv usersa >>>>>> > ndbox usersync" >>>>>> > FFLAGS="-O2 -pipe" >>>>>> > GENTOO_MIRRORS="rsync://gentoo.c3sl.ufpr.br/gentoo/ >>>>>> > http://gentoo.c3sl.ufpr.br/ ftp://gentoo.c3sl.ufpr.br/gentoo/ >>>>>> http://www.las >>>>>> > >>>>>> > .ic.unicamp.br/pub/gentoo/ ftp://ftp.las.ic.unicamp.br/pub/gentoo/" >>>>>> > LANG="es_VE.utf8" >>>>>> > LDFLAGS="-Wl,-O1 -Wl,--as-needed" >>>>>> > MAKEOPTS="-j1" >>>>>> > PKGDIR="/usr/portage/packages" >>>>>> > PORTAGE_CONFIGROOT="/" >>>>>> > PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times >>>>>> > --omit-dir-times --compress --force --whole-file --delete - >>>>>> > -stats --human-readable --timeout=180 --exclude=/distfiles >>>>>> --exclude=/local >>>>>> > --exclude=/packages" >>>>>> > PORTAGE_TMPDIR="/var/tmp" >>>>>> > PORTDIR="/usr/portage" >>>>>> > PORTDIR_OVERLAY="" >>>>>> > SYNC="rsync://rsync1.br.gentoo.org/gentoo-portage" >>>>>> > USE="acl amd64 berkdb bindist bzip2 cli cracklib crypt cxx dri >>>>>> fortran gdbm >>>>>> > iconv ipv6 mmx modules multilib multiuser ncurses nl >>>>>> > s nptl openmp pam pcre python readline session sse sse2 ssl systemd >>>>>> tcpd >>>>>> > unicode zlib" ABI_X86="64" ALSA_CARDS="intel" APACHE2_M >>>>>> > ODULES="authn_core authz_core socache_shmcb unixd actions alias >>>>>> auth_basic >>>>>> > authn_alias authn_anon authn_dbm authn_default authn_ >>>>>> > file authz_dbm authz_default authz_groupfile authz_host authz_owner >>>>>> > authz_user autoindex cache cgi cgid dav dav_fs dav_lock defl >>>>>> > ate dir disk_cache env expires ext_filter file_cache filter headers >>>>>> include >>>>>> > info log_config logio mem_cache mime mime_magic nego >>>>>> > tiation rewrite setenvif speling status unique_id userdir usertrack >>>>>> > vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets >>>>>> > stage tables krita karbon braindump author" CAMERAS="ptp2" >>>>>> > COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" >>>>>> E >>>>>> > LIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 >>>>>> garmin >>>>>> > garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oce >>>>>> > anserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing >>>>>> tsip >>>>>> > tripmate tnt ublox ubx" INPUT_DEVICES="keyboard mouse e >>>>>> > vdev synaptics" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 >>>>>> glk >>>>>> > hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_E >>>>>> > XTENSIONS="presenter-console presenter-minimizer" LINGUAS="es" >>>>>> > OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-5" PYTHON_S >>>>>> > INGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_3" >>>>>> > RUBY_TARGETS="ruby19 ruby20" USERLAND="GNU" VIDEO_CARDS="intel" XT >>>>>> > ABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset >>>>>> ipp2p iface >>>>>> > geoip fuzzy condition tee tarpit sysrq steal rawnat >>>>>> > logmark ipmark dhcpmac delude chaos account" >>>>>> > Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, >>>>>> > PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRES >>>>>> > S_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> > Muchas gracias por la ayuda que me puedan dar, ya que no he >>>>>> encontrado >>>>>> > referencia a esa version, trate de montar la r1, pero tambien me >>>>>> sale >>>>>> > error. >>>>>> > >>>>>> > >>>>>> >>>>>> >>>>>> -- >>>>>> Santiago López Denazis >>>>>> GNU/Linux SysAdmin >>>>>> sldenazis@linux.com >>>>>> Free your source, free your mind. >>>>>> ---- >>>>>> Por favor, no utilice formatos de archivo privativos para el >>>>>> intercambio >>>>>> de documentos, como DOC y XLS, sino HTML, PDF, TXT, CSV o cualquier >>>>>> otro >>>>>> que no obligue a utilizar un programa de un fabricante concreto. Vea >>>>>> http://www.gnu.org/philosophy/no-word-attachments.es.html >>>>>> -- >>>>>> >>>>>> >>>>> >>>>> >>>>> -- >>>>> >>>>> Freddy Taborda >>>>> Consultor Técnico >>>>> Valencia - Venezuela >>>>> GNU/Linux user #283478 >>>>> ECE #208825114 >>>>> >>>>> >>>>> What gets us into trouble is not what we don't know. It's what we know >>>>> for sure that just ain't so. >>>>> >>>>> Mark Twain >>>>> >>>>> "Those that can, do. Those that can’t, complain." >>>>> Linus Torvalds >>>>> >>>> >>> >>> >>> -- >>> >>> Freddy Taborda >>> Consultor Técnico >>> Valencia - Venezuela >>> GNU/Linux user #283478 >>> ECE #208825114 >>> >>> >>> What gets us into trouble is not what we don't know. It's what we know >>> for sure that just ain't so. >>> >>> Mark Twain >>> >>> "Those that can, do. Those that can’t, complain." >>> Linus Torvalds >>> >> > > > -- > > Freddy Taborda > Consultor Técnico > Valencia - Venezuela > GNU/Linux user #283478 > ECE #208825114 > > > What gets us into trouble is not what we don't know. It's what we know for > sure that just ain't so. > > Mark Twain > > "Those that can, do. Those that can’t, complain." > Linus Torvalds > [-- Attachment #2: Type: text/html, Size: 21969 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user-es] ERROR: dev-util/boost-build-1.55.0::gentoo failed 2014-12-19 17:03 ` KyD @ 2014-12-19 18:17 ` Freddy Taborda 2014-12-19 18:31 ` KyD 0 siblings, 1 reply; 14+ messages in thread From: Freddy Taborda @ 2014-12-19 18:17 UTC (permalink / raw To: gentoo-user-es [-- Attachment #1: Type: text/plain, Size: 18333 bytes --] Esrtimado KyD Funciono sin problemas, ahora se esta compilando el LVM2, pero tengo una duda yo tome el la configuracon iki.gentoo.org/wiki/Safe_CFLAGS Core i3/i5/i7 & Xeon E3/E5/E7 *V1 y hasta el momento todos los paquetes estaban compilando sin problema, y tu me estas pasando la configuracion Pentium y el paquete dev-util/boost-build-1.55.0::gentoo compilo sin problema y al momento de estar eascribiendo esto se esta compilando el resto de los que se necesita para LMV2, a manera de aprendisaje como llegaste a esa conclucion, que parte de la informacion que postee te sirvio? Saludos y muchas gracias por la ayuda e informacion 2014-12-19 12:33 GMT-04:30 KyD <kyd.is.back@gmail.com>: > Prueba lo siguiente : > > 1 ) export CFLAGS="-march=core-avx-i -mno-avx -mno-aes -mno-rdrnd -O2 > -pipe" > > 2 ) emerge --info | grep -i cflags (Esto es a modo de chequeo para ver que > se seteo bien CFLAGS) > > Si quedo bien seteada : > > 3) emerge -v dev-util/boost-build > > 2014-12-19 13:53 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: > >> cat /proc/cpuinfo >> processor : 0 >> vendor_id : GenuineIntel >> cpu family : 6 >> model : 58 >> model name : Intel(R) Pentium(R) CPU 2020M @ 2.40GHz >> stepping : 9 >> microcode : 0x19 >> cpu MHz : 2400.000 >> cache size : 2048 KB >> physical id : 0 >> siblings : 2 >> core id : 0 >> cpu cores : 2 >> apicid : 0 >> initial apicid : 0 >> fpu : yes >> fpu_exception : yes >> cpuid level : 13 >> wp : yes >> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge >> mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall >> nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology >> nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est >> tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt >> tsc_deadline_timer xsave lahf_lm arat epb xsaveopt pln pts dtherm >> tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms >> bogomips : 4789.09 >> clflush size : 64 >> cache_alignment : 64 >> address sizes : 36 bits physical, 48 bits virtual >> power management: >> >> processor : 1 >> vendor_id : GenuineIntel >> cpu family : 6 >> model : 58 >> model name : Intel(R) Pentium(R) CPU 2020M @ 2.40GHz >> stepping : 9 >> microcode : 0x19 >> cpu MHz : 2400.000 >> cache size : 2048 KB >> physical id : 0 >> siblings : 2 >> core id : 1 >> cpu cores : 2 >> apicid : 2 >> initial apicid : 2 >> fpu : yes >> fpu_exception : yes >> cpuid level : 13 >> wp : yes >> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge >> mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall >> nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology >> nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est >> tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt >> tsc_deadline_timer xsave lahf_lm arat epb xsaveopt pln pts dtherm >> tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms >> bogomips : 4789.09 >> clflush size : 64 >> cache_alignment : 64 >> address sizes : 36 bits physical, 48 bits virtual >> power management: >> >> >> Saludos >> >> 2014-12-19 12:13 GMT-04:30 KyD <kyd.is.back@gmail.com>: >> >> Ok , >>> >>> ¿ que procesador tienes ? >>> >>> 2014-12-19 13:12 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: >>> >>>> >>>> Gracias KyD >>>> >>>> # cat /etc/portage/make.conf >>>> # These settings were set by the catalyst build script that >>>> automatically >>>> # built this stage. >>>> # Please consult /usr/share/portage/config/make.conf.example for a more >>>> # detailed example. >>>> CFLAGS="-march=core-avx-i -O2 -pipe" >>>> #CFLAGS="-O2 -pipe" >>>> CXXFLAGS="${CFLAGS}" >>>> # WARNING: Changing your CHOST is not something that should be done >>>> lightly. >>>> # Please consult http://www.gentoo.org/doc/en/change-chost.xml before >>>> changing. >>>> CHOST="x86_64-pc-linux-gnu" >>>> # These are the USE flags that were used in addition to what is >>>> provided by the >>>> # profile used for building. >>>> USE="bindist mmx multiuser openrc sse sse2 symlink -systemd" >>>> PORTDIR="/usr/portage" >>>> DISTDIR="${PORTDIR}/distfiles" >>>> PKGDIR="${PORTDIR}/packages" >>>> MAKEOPTS="-j1" >>>> LINGUAS="es" >>>> ACCEPT_LICENSE="*" >>>> VIDEO_CARDS="intel" >>>> ALSA_CARDS="intel" >>>> INPUT_DEVICES="keyboard mouse evdev synaptics" >>>> >>>> >>>> GENTOO_MIRRORS="rsync://gentoo.c3sl.ufpr.br/gentoo/ >>>> http://gentoo.c3sl.ufpr.br/ ftp://gentoo.c3sl.ufpr.br/gentoo/ >>>> http://www.las.ic.unicamp.br/pub/gentoo/ >>>> ftp://ftp.las.ic.unicamp.br/pub/gentoo/" >>>> >>>> SYNC="rsync://rsync1.br.gentoo.org/gentoo-portage" >>>> >>>> >>>> Si necesitan algo mas de informacion por favor me avisan. >>>> >>>> >>>> Saludos >>>> >>>> 2014-12-19 11:19 GMT-04:30 KyD <kyd.is.back@gmail.com>: >>>> >>>> cat make.conf >>>>> >>>>> 2014-12-19 12:32 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: >>>>> >>>>>> Santiago gracias por tus comentarios. >>>>>> >>>>>> Igual con el mismo problema. >>>>>> >>>>>> http://pastebin.com/AquYw1GA >>>>>> >>>>>> Alguna idea mas. >>>>>> >>>>>> Saludos >>>>>> >>>>>> 2014-12-19 9:25 GMT-04:30 Santiago López Denazis <sldenazis@linux.com >>>>>> >: >>>>>> >>>>>> On 12/18/2014 11:45 PM, Freddy Taborda wrote: >>>>>>> > Hola, hace mucho que no usaba Linux y mucho menos Gentoo, ya que >>>>>>> no tenia >>>>>>> > equipo, ahora estoy haciendo una nueva instalacion >>>>>>> > >>>>>>> http://terracenter.blogspot.com/2014/12/instalacion-de-gentoo-en-una-laptop.html >>>>>>> > (le falta mucho a este tuto para dejarlo decente), pero al momento >>>>>>> de >>>>>>> > instalar lvm2 la compilacion me da estos errores >>>>>>> > >>>>>>> >>>>>>> Buenos días Freddy, si no es un problema para lo que necesitás, >>>>>>> intenta compilarlo con -python: >>>>>>> >>>>>>> echo dev-util/boost-build -python >> /etc/portage/package.use >>>>>>> >>>>>>> Saludos, >>>>>>> >>>>>>> > >>>>>>> > >>>>>>> > # emerge -pv lvm2 >>>>>>> > >>>>>>> > * IMPORTANT: 5 config files in '/etc/portage' need updating. >>>>>>> > * See the CONFIGURATION FILES section of the emerge >>>>>>> > * man page to learn how to update config files. >>>>>>> > >>>>>>> > These are the packages that would be merged, in order: >>>>>>> > >>>>>>> > Calculating dependencies... done! >>>>>>> > [ebuild N ] dev-util/boost-build-1.55.0 USE="python -examples >>>>>>> {-test}" 0 >>>>>>> > KiB >>>>>>> > [ebuild N ] virtual/libudev-215-r1:0/1 USE="systemd -static-libs" >>>>>>> > ABI_X86="(64) (-32) (-x32)" 0 KiB >>>>>>> > [ebuild N ] dev-libs/boost-1.55.0-r2:0/1.55.0 USE="nls python >>>>>>> threads >>>>>>> > -context -debug -doc -icu -mpi -static-libs -tools" >>>>>>> > ABI_X86="(64) (-32) (-x32)" PYTHON_TARGETS="python2_7 python3_3 >>>>>>> -python3_4" >>>>>>> > 0 KiB >>>>>>> > [ebuild N ] sys-block/thin-provisioning-tools-0.3.2-r1 >>>>>>> USE="{-test}" 0 KiB >>>>>>> > [ebuild N ] sys-fs/lvm2-2.02.109 USE="readline systemd thin udev >>>>>>> (-clvm) >>>>>>> > (-cman) -device-mapper-only -lvm1 -lvm2create_ini >>>>>>> > trd (-selinux) -static -static-libs" 0 KiB >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > * ERROR: dev-util/boost-build-1.55.0::gentoo failed (compile >>>>>>> phase): >>>>>>> > * building bjam failed >>>>>>> > * >>>>>>> > * Call stack: >>>>>>> > * ebuild.sh, line 93: Called src_compile >>>>>>> > * environment, line 4955: Called die >>>>>>> > * The specific snippet of code: >>>>>>> > * CC=$(tc-getCC) ./build.sh ${toolset} -d+2 $(use_with python >>>>>>> python >>>>>>> > "${EROOT}"/usr) || die "building bjam failed" >>>>>>> > * >>>>>>> > * If you need support, post the output of `emerge --info >>>>>>> > '=dev-util/boost-build-1.55.0::gentoo'`, >>>>>>> > * the complete build log and the output of `emerge -pqv >>>>>>> > '=dev-util/boost-build-1.55.0::gentoo'`. >>>>>>> > * The complete build log is located at >>>>>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log'. >>>>>>> > * The ebuild environment file is located at >>>>>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/environment'. >>>>>>> > * Working directory: >>>>>>> > >>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2/engine' >>>>>>> > * S: >>>>>>> > >>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2' >>>>>>> > >>>>>>> >>>> Failed to emerge dev-util/boost-build-1.55.0, Log file: >>>>>>> > >>>>>>> >>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log' >>>>>>> > >>>>>>> > * Messages for package dev-util/boost-build-1.55.0: >>>>>>> > >>>>>>> > * ERROR: dev-util/boost-build-1.55.0::gentoo failed (compile >>>>>>> phase): >>>>>>> > * building bjam failed >>>>>>> > * >>>>>>> > * Call stack: >>>>>>> > * ebuild.sh, line 93: Called src_compile >>>>>>> > * environment, line 4955: Called die >>>>>>> > * The specific snippet of code: >>>>>>> > * CC=$(tc-getCC) ./build.sh ${toolset} -d+2 $(use_with python >>>>>>> python >>>>>>> > "${EROOT}"/usr) || die "building bjam failed" >>>>>>> > * >>>>>>> > * If you need support, post the output of `emerge --info >>>>>>> > '=dev-util/boost-build-1.55.0::gentoo'`, >>>>>>> > * the complete build log and the output of `emerge -pqv >>>>>>> > '=dev-util/boost-build-1.55.0::gentoo'`. >>>>>>> > * The complete build log is located at >>>>>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log'. >>>>>>> > * The ebuild environment file is located at >>>>>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/environment'. >>>>>>> > * Working directory: >>>>>>> > >>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2/engine' >>>>>>> > * S: >>>>>>> > >>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2' >>>>>>> > livecd / # >>>>>>> > >>>>>>> > # emerge --info '=dev-libs/boost-1.55.0::gentoo' >>>>>>> > Portage 2.2.14 (python 2.7.7-final-0, default/linux/amd64/13.0, >>>>>>> gcc-4.8.3, >>>>>>> > glibc-2.19-r1, 3.16.5-gentoo x86_64) >>>>>>> > ================================================================= >>>>>>> > System Settings >>>>>>> > ================================================================= >>>>>>> > System uname: >>>>>>> Linux-3.16.5-gentoo-x86_64-Intel-R-_Pentium-R-_CPU_2020M_@ >>>>>>> > _2.40GHz-with-gentoo-2.2 >>>>>>> > KiB Mem: 3927272 total, 81700 free >>>>>>> > KiB Swap: 2097148 total, 2096904 free >>>>>>> > Timestamp of tree: Thu, 18 Dec 2014 17:15:01 +0000 >>>>>>> > ld GNU ld (Gentoo 2.24 p1.4) 2.24 >>>>>>> > app-shells/bash: 4.2_p53 >>>>>>> > dev-lang/perl: 5.18.2-r2 >>>>>>> > dev-lang/python: 2.7.7, 3.3.5-r1 >>>>>>> > dev-util/pkgconfig: 0.28-r1 >>>>>>> > sys-apps/baselayout: 2.2 >>>>>>> > sys-apps/openrc: 0.12.4 >>>>>>> > sys-apps/sandbox: 2.6-r1 >>>>>>> > sys-devel/autoconf: 2.69 >>>>>>> > sys-devel/automake: 1.13.4 >>>>>>> > sys-devel/binutils: 2.24-r3 >>>>>>> > sys-devel/gcc: 4.8.3 >>>>>>> > sys-devel/gcc-config: 1.7.3 >>>>>>> > sys-devel/libtool: 2.4.2-r1 >>>>>>> > sys-devel/make: 4.0-r1 >>>>>>> > sys-kernel/linux-headers: 3.16 (virtual/os-headers) >>>>>>> > Repositories: gentoo >>>>>>> > ACCEPT_LICENSE="*" >>>>>>> > CBUILD="x86_64-pc-linux-gnu" >>>>>>> > CFLAGS="-march=core-avx-i -O2 -pipe" >>>>>>> > CHOST="x86_64-pc-linux-gnu" >>>>>>> > CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt" >>>>>>> > CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d >>>>>>> /etc/gconf >>>>>>> > /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc >>>>>>> > /terminfo" >>>>>>> > CXXFLAGS="-march=core-avx-i -O2 -pipe" >>>>>>> > DISTDIR="/usr/portage/distfiles" >>>>>>> > FCFLAGS="-O2 -pipe" >>>>>>> > FEATURES="assume-digests binpkg-logs config-protect-if-modified >>>>>>> distlocks >>>>>>> > ebuild-locks fixlafiles merge-sync news parallel-fetch >>>>>>> > preserve-libs protect-owned sandbox sfperms strict >>>>>>> unknown-features-warn >>>>>>> > unmerge-logs unmerge-orphans userfetch userpriv usersa >>>>>>> > ndbox usersync" >>>>>>> > FFLAGS="-O2 -pipe" >>>>>>> > GENTOO_MIRRORS="rsync://gentoo.c3sl.ufpr.br/gentoo/ >>>>>>> > http://gentoo.c3sl.ufpr.br/ ftp://gentoo.c3sl.ufpr.br/gentoo/ >>>>>>> http://www.las >>>>>>> > >>>>>>> > .ic.unicamp.br/pub/gentoo/ ftp://ftp.las.ic.unicamp.br/pub/gentoo/ >>>>>>> " >>>>>>> > LANG="es_VE.utf8" >>>>>>> > LDFLAGS="-Wl,-O1 -Wl,--as-needed" >>>>>>> > MAKEOPTS="-j1" >>>>>>> > PKGDIR="/usr/portage/packages" >>>>>>> > PORTAGE_CONFIGROOT="/" >>>>>>> > PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms >>>>>>> --times >>>>>>> > --omit-dir-times --compress --force --whole-file --delete - >>>>>>> > -stats --human-readable --timeout=180 --exclude=/distfiles >>>>>>> --exclude=/local >>>>>>> > --exclude=/packages" >>>>>>> > PORTAGE_TMPDIR="/var/tmp" >>>>>>> > PORTDIR="/usr/portage" >>>>>>> > PORTDIR_OVERLAY="" >>>>>>> > SYNC="rsync://rsync1.br.gentoo.org/gentoo-portage" >>>>>>> > USE="acl amd64 berkdb bindist bzip2 cli cracklib crypt cxx dri >>>>>>> fortran gdbm >>>>>>> > iconv ipv6 mmx modules multilib multiuser ncurses nl >>>>>>> > s nptl openmp pam pcre python readline session sse sse2 ssl >>>>>>> systemd tcpd >>>>>>> > unicode zlib" ABI_X86="64" ALSA_CARDS="intel" APACHE2_M >>>>>>> > ODULES="authn_core authz_core socache_shmcb unixd actions alias >>>>>>> auth_basic >>>>>>> > authn_alias authn_anon authn_dbm authn_default authn_ >>>>>>> > file authz_dbm authz_default authz_groupfile authz_host authz_owner >>>>>>> > authz_user autoindex cache cgi cgid dav dav_fs dav_lock defl >>>>>>> > ate dir disk_cache env expires ext_filter file_cache filter >>>>>>> headers include >>>>>>> > info log_config logio mem_cache mime mime_magic nego >>>>>>> > tiation rewrite setenvif speling status unique_id userdir usertrack >>>>>>> > vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets >>>>>>> > stage tables krita karbon braindump author" CAMERAS="ptp2" >>>>>>> > COLLECTD_PLUGINS="df interface irq load memory rrdtool swap >>>>>>> syslog" E >>>>>>> > LIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 >>>>>>> garmin >>>>>>> > garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oce >>>>>>> > anserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 >>>>>>> timing tsip >>>>>>> > tripmate tnt ublox ubx" INPUT_DEVICES="keyboard mouse e >>>>>>> > vdev synaptics" KERNEL="linux" LCD_DEVICES="bayrad cfontz >>>>>>> cfontz633 glk >>>>>>> > hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_E >>>>>>> > XTENSIONS="presenter-console presenter-minimizer" LINGUAS="es" >>>>>>> > OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-5" PYTHON_S >>>>>>> > INGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_3" >>>>>>> > RUBY_TARGETS="ruby19 ruby20" USERLAND="GNU" VIDEO_CARDS="intel" XT >>>>>>> > ABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset >>>>>>> ipp2p iface >>>>>>> > geoip fuzzy condition tee tarpit sysrq steal rawnat >>>>>>> > logmark ipmark dhcpmac delude chaos account" >>>>>>> > Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, >>>>>>> LC_ALL, >>>>>>> > PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRES >>>>>>> > S_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > Muchas gracias por la ayuda que me puedan dar, ya que no he >>>>>>> encontrado >>>>>>> > referencia a esa version, trate de montar la r1, pero tambien me >>>>>>> sale >>>>>>> > error. >>>>>>> > >>>>>>> > >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> Santiago López Denazis >>>>>>> GNU/Linux SysAdmin >>>>>>> sldenazis@linux.com >>>>>>> Free your source, free your mind. >>>>>>> ---- >>>>>>> Por favor, no utilice formatos de archivo privativos para el >>>>>>> intercambio >>>>>>> de documentos, como DOC y XLS, sino HTML, PDF, TXT, CSV o cualquier >>>>>>> otro >>>>>>> que no obligue a utilizar un programa de un fabricante concreto. Vea >>>>>>> http://www.gnu.org/philosophy/no-word-attachments.es.html >>>>>>> -- >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> >>>>>> Freddy Taborda >>>>>> Consultor Técnico >>>>>> Valencia - Venezuela >>>>>> GNU/Linux user #283478 >>>>>> ECE #208825114 >>>>>> >>>>>> >>>>>> What gets us into trouble is not what we don't know. It's what we >>>>>> know for sure that just ain't so. >>>>>> >>>>>> Mark Twain >>>>>> >>>>>> "Those that can, do. Those that can’t, complain." >>>>>> Linus Torvalds >>>>>> >>>>> >>>> >>>> >>>> -- >>>> >>>> Freddy Taborda >>>> Consultor Técnico >>>> Valencia - Venezuela >>>> GNU/Linux user #283478 >>>> ECE #208825114 >>>> >>>> >>>> What gets us into trouble is not what we don't know. It's what we know >>>> for sure that just ain't so. >>>> >>>> Mark Twain >>>> >>>> "Those that can, do. Those that can’t, complain." >>>> Linus Torvalds >>>> >>> >> >> >> -- >> >> Freddy Taborda >> Consultor Técnico >> Valencia - Venezuela >> GNU/Linux user #283478 >> ECE #208825114 >> >> >> What gets us into trouble is not what we don't know. It's what we know >> for sure that just ain't so. >> >> Mark Twain >> >> "Those that can, do. Those that can’t, complain." >> Linus Torvalds >> > -- Freddy Taborda Consultor Técnico Valencia - Venezuela GNU/Linux user #283478 ECE #208825114 What gets us into trouble is not what we don't know. It's what we know for sure that just ain't so. Mark Twain "Those that can, do. Those that can’t, complain." Linus Torvalds [-- Attachment #2: Type: text/html, Size: 24450 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user-es] ERROR: dev-util/boost-build-1.55.0::gentoo failed 2014-12-19 18:17 ` Freddy Taborda @ 2014-12-19 18:31 ` KyD 2014-12-19 19:05 ` Freddy Taborda 0 siblings, 1 reply; 14+ messages in thread From: KyD @ 2014-12-19 18:31 UTC (permalink / raw To: gentoo-user-es [-- Attachment #1: Type: text/plain, Size: 19121 bytes --] A través de tu make.conf y de tu tipo de microprocesador. Creo que rendirá mejor si modificas tu CFLAGS de tu make.conf con la que te eh pasado. 2014-12-19 15:17 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: > > Esrtimado KyD > > Funciono sin problemas, ahora se esta compilando el LVM2, pero tengo una > duda yo tome el la configuracon iki.gentoo.org/wiki/Safe_CFLAGS > Core i3/i5/i7 & Xeon E3/E5/E7 *V1 y hasta el momento todos los paquetes > estaban compilando sin problema, y tu me estas pasando la configuracion > Pentium y el paquete dev-util/boost-build-1.55.0::gentoo compilo sin > problema y al momento de estar eascribiendo esto se esta > compilando el resto de los que se necesita para LMV2, a manera de > aprendisaje como llegaste a esa conclucion, que parte de la informacion que > postee te sirvio? > > Saludos y muchas gracias por la ayuda e informacion > > > > > > > 2014-12-19 12:33 GMT-04:30 KyD <kyd.is.back@gmail.com>: > > Prueba lo siguiente : >> >> 1 ) export CFLAGS="-march=core-avx-i -mno-avx -mno-aes -mno-rdrnd -O2 >> -pipe" >> >> 2 ) emerge --info | grep -i cflags (Esto es a modo de chequeo para ver >> que se seteo bien CFLAGS) >> >> Si quedo bien seteada : >> >> 3) emerge -v dev-util/boost-build >> >> 2014-12-19 13:53 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: >> >>> cat /proc/cpuinfo >>> processor : 0 >>> vendor_id : GenuineIntel >>> cpu family : 6 >>> model : 58 >>> model name : Intel(R) Pentium(R) CPU 2020M @ 2.40GHz >>> stepping : 9 >>> microcode : 0x19 >>> cpu MHz : 2400.000 >>> cache size : 2048 KB >>> physical id : 0 >>> siblings : 2 >>> core id : 0 >>> cpu cores : 2 >>> apicid : 0 >>> initial apicid : 0 >>> fpu : yes >>> fpu_exception : yes >>> cpuid level : 13 >>> wp : yes >>> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge >>> mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall >>> nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology >>> nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est >>> tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt >>> tsc_deadline_timer xsave lahf_lm arat epb xsaveopt pln pts dtherm >>> tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms >>> bogomips : 4789.09 >>> clflush size : 64 >>> cache_alignment : 64 >>> address sizes : 36 bits physical, 48 bits virtual >>> power management: >>> >>> processor : 1 >>> vendor_id : GenuineIntel >>> cpu family : 6 >>> model : 58 >>> model name : Intel(R) Pentium(R) CPU 2020M @ 2.40GHz >>> stepping : 9 >>> microcode : 0x19 >>> cpu MHz : 2400.000 >>> cache size : 2048 KB >>> physical id : 0 >>> siblings : 2 >>> core id : 1 >>> cpu cores : 2 >>> apicid : 2 >>> initial apicid : 2 >>> fpu : yes >>> fpu_exception : yes >>> cpuid level : 13 >>> wp : yes >>> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge >>> mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall >>> nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology >>> nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est >>> tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt >>> tsc_deadline_timer xsave lahf_lm arat epb xsaveopt pln pts dtherm >>> tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms >>> bogomips : 4789.09 >>> clflush size : 64 >>> cache_alignment : 64 >>> address sizes : 36 bits physical, 48 bits virtual >>> power management: >>> >>> >>> Saludos >>> >>> 2014-12-19 12:13 GMT-04:30 KyD <kyd.is.back@gmail.com>: >>> >>> Ok , >>>> >>>> ¿ que procesador tienes ? >>>> >>>> 2014-12-19 13:12 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: >>>> >>>>> >>>>> Gracias KyD >>>>> >>>>> # cat /etc/portage/make.conf >>>>> # These settings were set by the catalyst build script that >>>>> automatically >>>>> # built this stage. >>>>> # Please consult /usr/share/portage/config/make.conf.example for a more >>>>> # detailed example. >>>>> CFLAGS="-march=core-avx-i -O2 -pipe" >>>>> #CFLAGS="-O2 -pipe" >>>>> CXXFLAGS="${CFLAGS}" >>>>> # WARNING: Changing your CHOST is not something that should be done >>>>> lightly. >>>>> # Please consult http://www.gentoo.org/doc/en/change-chost.xml before >>>>> changing. >>>>> CHOST="x86_64-pc-linux-gnu" >>>>> # These are the USE flags that were used in addition to what is >>>>> provided by the >>>>> # profile used for building. >>>>> USE="bindist mmx multiuser openrc sse sse2 symlink -systemd" >>>>> PORTDIR="/usr/portage" >>>>> DISTDIR="${PORTDIR}/distfiles" >>>>> PKGDIR="${PORTDIR}/packages" >>>>> MAKEOPTS="-j1" >>>>> LINGUAS="es" >>>>> ACCEPT_LICENSE="*" >>>>> VIDEO_CARDS="intel" >>>>> ALSA_CARDS="intel" >>>>> INPUT_DEVICES="keyboard mouse evdev synaptics" >>>>> >>>>> >>>>> GENTOO_MIRRORS="rsync://gentoo.c3sl.ufpr.br/gentoo/ >>>>> http://gentoo.c3sl.ufpr.br/ ftp://gentoo.c3sl.ufpr.br/gentoo/ >>>>> http://www.las.ic.unicamp.br/pub/gentoo/ >>>>> ftp://ftp.las.ic.unicamp.br/pub/gentoo/" >>>>> >>>>> SYNC="rsync://rsync1.br.gentoo.org/gentoo-portage" >>>>> >>>>> >>>>> Si necesitan algo mas de informacion por favor me avisan. >>>>> >>>>> >>>>> Saludos >>>>> >>>>> 2014-12-19 11:19 GMT-04:30 KyD <kyd.is.back@gmail.com>: >>>>> >>>>> cat make.conf >>>>>> >>>>>> 2014-12-19 12:32 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: >>>>>> >>>>>>> Santiago gracias por tus comentarios. >>>>>>> >>>>>>> Igual con el mismo problema. >>>>>>> >>>>>>> http://pastebin.com/AquYw1GA >>>>>>> >>>>>>> Alguna idea mas. >>>>>>> >>>>>>> Saludos >>>>>>> >>>>>>> 2014-12-19 9:25 GMT-04:30 Santiago López Denazis < >>>>>>> sldenazis@linux.com>: >>>>>>> >>>>>>> On 12/18/2014 11:45 PM, Freddy Taborda wrote: >>>>>>>> > Hola, hace mucho que no usaba Linux y mucho menos Gentoo, ya que >>>>>>>> no tenia >>>>>>>> > equipo, ahora estoy haciendo una nueva instalacion >>>>>>>> > >>>>>>>> http://terracenter.blogspot.com/2014/12/instalacion-de-gentoo-en-una-laptop.html >>>>>>>> > (le falta mucho a este tuto para dejarlo decente), pero al >>>>>>>> momento de >>>>>>>> > instalar lvm2 la compilacion me da estos errores >>>>>>>> > >>>>>>>> >>>>>>>> Buenos días Freddy, si no es un problema para lo que necesitás, >>>>>>>> intenta compilarlo con -python: >>>>>>>> >>>>>>>> echo dev-util/boost-build -python >> >>>>>>>> /etc/portage/package.use >>>>>>>> >>>>>>>> Saludos, >>>>>>>> >>>>>>>> > >>>>>>>> > >>>>>>>> > # emerge -pv lvm2 >>>>>>>> > >>>>>>>> > * IMPORTANT: 5 config files in '/etc/portage' need updating. >>>>>>>> > * See the CONFIGURATION FILES section of the emerge >>>>>>>> > * man page to learn how to update config files. >>>>>>>> > >>>>>>>> > These are the packages that would be merged, in order: >>>>>>>> > >>>>>>>> > Calculating dependencies... done! >>>>>>>> > [ebuild N ] dev-util/boost-build-1.55.0 USE="python -examples >>>>>>>> {-test}" 0 >>>>>>>> > KiB >>>>>>>> > [ebuild N ] virtual/libudev-215-r1:0/1 USE="systemd -static-libs" >>>>>>>> > ABI_X86="(64) (-32) (-x32)" 0 KiB >>>>>>>> > [ebuild N ] dev-libs/boost-1.55.0-r2:0/1.55.0 USE="nls python >>>>>>>> threads >>>>>>>> > -context -debug -doc -icu -mpi -static-libs -tools" >>>>>>>> > ABI_X86="(64) (-32) (-x32)" PYTHON_TARGETS="python2_7 python3_3 >>>>>>>> -python3_4" >>>>>>>> > 0 KiB >>>>>>>> > [ebuild N ] sys-block/thin-provisioning-tools-0.3.2-r1 >>>>>>>> USE="{-test}" 0 KiB >>>>>>>> > [ebuild N ] sys-fs/lvm2-2.02.109 USE="readline systemd thin udev >>>>>>>> (-clvm) >>>>>>>> > (-cman) -device-mapper-only -lvm1 -lvm2create_ini >>>>>>>> > trd (-selinux) -static -static-libs" 0 KiB >>>>>>>> > >>>>>>>> > >>>>>>>> > >>>>>>>> > * ERROR: dev-util/boost-build-1.55.0::gentoo failed (compile >>>>>>>> phase): >>>>>>>> > * building bjam failed >>>>>>>> > * >>>>>>>> > * Call stack: >>>>>>>> > * ebuild.sh, line 93: Called src_compile >>>>>>>> > * environment, line 4955: Called die >>>>>>>> > * The specific snippet of code: >>>>>>>> > * CC=$(tc-getCC) ./build.sh ${toolset} -d+2 $(use_with python >>>>>>>> python >>>>>>>> > "${EROOT}"/usr) || die "building bjam failed" >>>>>>>> > * >>>>>>>> > * If you need support, post the output of `emerge --info >>>>>>>> > '=dev-util/boost-build-1.55.0::gentoo'`, >>>>>>>> > * the complete build log and the output of `emerge -pqv >>>>>>>> > '=dev-util/boost-build-1.55.0::gentoo'`. >>>>>>>> > * The complete build log is located at >>>>>>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log'. >>>>>>>> > * The ebuild environment file is located at >>>>>>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/environment'. >>>>>>>> > * Working directory: >>>>>>>> > >>>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2/engine' >>>>>>>> > * S: >>>>>>>> > >>>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2' >>>>>>>> > >>>>>>>> >>>> Failed to emerge dev-util/boost-build-1.55.0, Log file: >>>>>>>> > >>>>>>>> >>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log' >>>>>>>> > >>>>>>>> > * Messages for package dev-util/boost-build-1.55.0: >>>>>>>> > >>>>>>>> > * ERROR: dev-util/boost-build-1.55.0::gentoo failed (compile >>>>>>>> phase): >>>>>>>> > * building bjam failed >>>>>>>> > * >>>>>>>> > * Call stack: >>>>>>>> > * ebuild.sh, line 93: Called src_compile >>>>>>>> > * environment, line 4955: Called die >>>>>>>> > * The specific snippet of code: >>>>>>>> > * CC=$(tc-getCC) ./build.sh ${toolset} -d+2 $(use_with python >>>>>>>> python >>>>>>>> > "${EROOT}"/usr) || die "building bjam failed" >>>>>>>> > * >>>>>>>> > * If you need support, post the output of `emerge --info >>>>>>>> > '=dev-util/boost-build-1.55.0::gentoo'`, >>>>>>>> > * the complete build log and the output of `emerge -pqv >>>>>>>> > '=dev-util/boost-build-1.55.0::gentoo'`. >>>>>>>> > * The complete build log is located at >>>>>>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log'. >>>>>>>> > * The ebuild environment file is located at >>>>>>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/environment'. >>>>>>>> > * Working directory: >>>>>>>> > >>>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2/engine' >>>>>>>> > * S: >>>>>>>> > >>>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2' >>>>>>>> > livecd / # >>>>>>>> > >>>>>>>> > # emerge --info '=dev-libs/boost-1.55.0::gentoo' >>>>>>>> > Portage 2.2.14 (python 2.7.7-final-0, default/linux/amd64/13.0, >>>>>>>> gcc-4.8.3, >>>>>>>> > glibc-2.19-r1, 3.16.5-gentoo x86_64) >>>>>>>> > ================================================================= >>>>>>>> > System Settings >>>>>>>> > ================================================================= >>>>>>>> > System uname: >>>>>>>> Linux-3.16.5-gentoo-x86_64-Intel-R-_Pentium-R-_CPU_2020M_@ >>>>>>>> > _2.40GHz-with-gentoo-2.2 >>>>>>>> > KiB Mem: 3927272 total, 81700 free >>>>>>>> > KiB Swap: 2097148 total, 2096904 free >>>>>>>> > Timestamp of tree: Thu, 18 Dec 2014 17:15:01 +0000 >>>>>>>> > ld GNU ld (Gentoo 2.24 p1.4) 2.24 >>>>>>>> > app-shells/bash: 4.2_p53 >>>>>>>> > dev-lang/perl: 5.18.2-r2 >>>>>>>> > dev-lang/python: 2.7.7, 3.3.5-r1 >>>>>>>> > dev-util/pkgconfig: 0.28-r1 >>>>>>>> > sys-apps/baselayout: 2.2 >>>>>>>> > sys-apps/openrc: 0.12.4 >>>>>>>> > sys-apps/sandbox: 2.6-r1 >>>>>>>> > sys-devel/autoconf: 2.69 >>>>>>>> > sys-devel/automake: 1.13.4 >>>>>>>> > sys-devel/binutils: 2.24-r3 >>>>>>>> > sys-devel/gcc: 4.8.3 >>>>>>>> > sys-devel/gcc-config: 1.7.3 >>>>>>>> > sys-devel/libtool: 2.4.2-r1 >>>>>>>> > sys-devel/make: 4.0-r1 >>>>>>>> > sys-kernel/linux-headers: 3.16 (virtual/os-headers) >>>>>>>> > Repositories: gentoo >>>>>>>> > ACCEPT_LICENSE="*" >>>>>>>> > CBUILD="x86_64-pc-linux-gnu" >>>>>>>> > CFLAGS="-march=core-avx-i -O2 -pipe" >>>>>>>> > CHOST="x86_64-pc-linux-gnu" >>>>>>>> > CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt" >>>>>>>> > CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d >>>>>>>> /etc/gconf >>>>>>>> > /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc >>>>>>>> > /terminfo" >>>>>>>> > CXXFLAGS="-march=core-avx-i -O2 -pipe" >>>>>>>> > DISTDIR="/usr/portage/distfiles" >>>>>>>> > FCFLAGS="-O2 -pipe" >>>>>>>> > FEATURES="assume-digests binpkg-logs config-protect-if-modified >>>>>>>> distlocks >>>>>>>> > ebuild-locks fixlafiles merge-sync news parallel-fetch >>>>>>>> > preserve-libs protect-owned sandbox sfperms strict >>>>>>>> unknown-features-warn >>>>>>>> > unmerge-logs unmerge-orphans userfetch userpriv usersa >>>>>>>> > ndbox usersync" >>>>>>>> > FFLAGS="-O2 -pipe" >>>>>>>> > GENTOO_MIRRORS="rsync://gentoo.c3sl.ufpr.br/gentoo/ >>>>>>>> > http://gentoo.c3sl.ufpr.br/ ftp://gentoo.c3sl.ufpr.br/gentoo/ >>>>>>>> http://www.las >>>>>>>> > >>>>>>>> > .ic.unicamp.br/pub/gentoo/ >>>>>>>> ftp://ftp.las.ic.unicamp.br/pub/gentoo/" >>>>>>>> > LANG="es_VE.utf8" >>>>>>>> > LDFLAGS="-Wl,-O1 -Wl,--as-needed" >>>>>>>> > MAKEOPTS="-j1" >>>>>>>> > PKGDIR="/usr/portage/packages" >>>>>>>> > PORTAGE_CONFIGROOT="/" >>>>>>>> > PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms >>>>>>>> --times >>>>>>>> > --omit-dir-times --compress --force --whole-file --delete - >>>>>>>> > -stats --human-readable --timeout=180 --exclude=/distfiles >>>>>>>> --exclude=/local >>>>>>>> > --exclude=/packages" >>>>>>>> > PORTAGE_TMPDIR="/var/tmp" >>>>>>>> > PORTDIR="/usr/portage" >>>>>>>> > PORTDIR_OVERLAY="" >>>>>>>> > SYNC="rsync://rsync1.br.gentoo.org/gentoo-portage" >>>>>>>> > USE="acl amd64 berkdb bindist bzip2 cli cracklib crypt cxx dri >>>>>>>> fortran gdbm >>>>>>>> > iconv ipv6 mmx modules multilib multiuser ncurses nl >>>>>>>> > s nptl openmp pam pcre python readline session sse sse2 ssl >>>>>>>> systemd tcpd >>>>>>>> > unicode zlib" ABI_X86="64" ALSA_CARDS="intel" APACHE2_M >>>>>>>> > ODULES="authn_core authz_core socache_shmcb unixd actions alias >>>>>>>> auth_basic >>>>>>>> > authn_alias authn_anon authn_dbm authn_default authn_ >>>>>>>> > file authz_dbm authz_default authz_groupfile authz_host >>>>>>>> authz_owner >>>>>>>> > authz_user autoindex cache cgi cgid dav dav_fs dav_lock defl >>>>>>>> > ate dir disk_cache env expires ext_filter file_cache filter >>>>>>>> headers include >>>>>>>> > info log_config logio mem_cache mime mime_magic nego >>>>>>>> > tiation rewrite setenvif speling status unique_id userdir >>>>>>>> usertrack >>>>>>>> > vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets >>>>>>>> > stage tables krita karbon braindump author" CAMERAS="ptp2" >>>>>>>> > COLLECTD_PLUGINS="df interface irq load memory rrdtool swap >>>>>>>> syslog" E >>>>>>>> > LIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore >>>>>>>> fv18 garmin >>>>>>>> > garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oce >>>>>>>> > anserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 >>>>>>>> timing tsip >>>>>>>> > tripmate tnt ublox ubx" INPUT_DEVICES="keyboard mouse e >>>>>>>> > vdev synaptics" KERNEL="linux" LCD_DEVICES="bayrad cfontz >>>>>>>> cfontz633 glk >>>>>>>> > hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_E >>>>>>>> > XTENSIONS="presenter-console presenter-minimizer" LINGUAS="es" >>>>>>>> > OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-5" PYTHON_S >>>>>>>> > INGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_3" >>>>>>>> > RUBY_TARGETS="ruby19 ruby20" USERLAND="GNU" VIDEO_CARDS="intel" XT >>>>>>>> > ABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset >>>>>>>> ipp2p iface >>>>>>>> > geoip fuzzy condition tee tarpit sysrq steal rawnat >>>>>>>> > logmark ipmark dhcpmac delude chaos account" >>>>>>>> > Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, >>>>>>>> LC_ALL, >>>>>>>> > PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRES >>>>>>>> > S_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON >>>>>>>> > >>>>>>>> > >>>>>>>> > >>>>>>>> > >>>>>>>> > Muchas gracias por la ayuda que me puedan dar, ya que no he >>>>>>>> encontrado >>>>>>>> > referencia a esa version, trate de montar la r1, pero tambien me >>>>>>>> sale >>>>>>>> > error. >>>>>>>> > >>>>>>>> > >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> Santiago López Denazis >>>>>>>> GNU/Linux SysAdmin >>>>>>>> sldenazis@linux.com >>>>>>>> Free your source, free your mind. >>>>>>>> ---- >>>>>>>> Por favor, no utilice formatos de archivo privativos para el >>>>>>>> intercambio >>>>>>>> de documentos, como DOC y XLS, sino HTML, PDF, TXT, CSV o cualquier >>>>>>>> otro >>>>>>>> que no obligue a utilizar un programa de un fabricante concreto. Vea >>>>>>>> http://www.gnu.org/philosophy/no-word-attachments.es.html >>>>>>>> -- >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> >>>>>>> Freddy Taborda >>>>>>> Consultor Técnico >>>>>>> Valencia - Venezuela >>>>>>> GNU/Linux user #283478 >>>>>>> ECE #208825114 >>>>>>> >>>>>>> >>>>>>> What gets us into trouble is not what we don't know. It's what we >>>>>>> know for sure that just ain't so. >>>>>>> >>>>>>> Mark Twain >>>>>>> >>>>>>> "Those that can, do. Those that can’t, complain." >>>>>>> Linus Torvalds >>>>>>> >>>>>> >>>>> >>>>> >>>>> -- >>>>> >>>>> Freddy Taborda >>>>> Consultor Técnico >>>>> Valencia - Venezuela >>>>> GNU/Linux user #283478 >>>>> ECE #208825114 >>>>> >>>>> >>>>> What gets us into trouble is not what we don't know. It's what we know >>>>> for sure that just ain't so. >>>>> >>>>> Mark Twain >>>>> >>>>> "Those that can, do. Those that can’t, complain." >>>>> Linus Torvalds >>>>> >>>> >>> >>> >>> -- >>> >>> Freddy Taborda >>> Consultor Técnico >>> Valencia - Venezuela >>> GNU/Linux user #283478 >>> ECE #208825114 >>> >>> >>> What gets us into trouble is not what we don't know. It's what we know >>> for sure that just ain't so. >>> >>> Mark Twain >>> >>> "Those that can, do. Those that can’t, complain." >>> Linus Torvalds >>> >> > > > -- > > Freddy Taborda > Consultor Técnico > Valencia - Venezuela > GNU/Linux user #283478 > ECE #208825114 > > > What gets us into trouble is not what we don't know. It's what we know for > sure that just ain't so. > > Mark Twain > > "Those that can, do. Those that can’t, complain." > Linus Torvalds > [-- Attachment #2: Type: text/html, Size: 25012 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user-es] ERROR: dev-util/boost-build-1.55.0::gentoo failed 2014-12-19 18:31 ` KyD @ 2014-12-19 19:05 ` Freddy Taborda 2014-12-19 19:17 ` KyD 0 siblings, 1 reply; 14+ messages in thread From: Freddy Taborda @ 2014-12-19 19:05 UTC (permalink / raw To: gentoo-user-es [-- Attachment #1: Type: text/plain, Size: 20341 bytes --] Muchas gracias, pero perdona como se yo que parte la info del "microprocesador" me indica lo de los CFLAGS? Ya cambie los CFLAGS del make.conf, deberia recompilar todo de nuevo con la nueva configuracion? Muchas gracias. 2014-12-19 14:01 GMT-04:30 KyD <kyd.is.back@gmail.com>: > A través de tu make.conf y de tu tipo de microprocesador. > > Creo que rendirá mejor si modificas tu CFLAGS de tu make.conf con la que > te eh pasado. > > 2014-12-19 15:17 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: > >> Esrtimado KyD >> >> Funciono sin problemas, ahora se esta compilando el LVM2, pero tengo una >> duda yo tome el la configuracon iki.gentoo.org/wiki/Safe_CFLAGS >> Core i3/i5/i7 & Xeon E3/E5/E7 *V1 y hasta el momento todos los paquetes >> estaban compilando sin problema, y tu me estas pasando la configuracion >> Pentium y el paquete dev-util/boost-build-1.55.0::gentoo compilo sin >> problema y al momento de estar eascribiendo esto se esta >> compilando el resto de los que se necesita para LMV2, a manera de >> aprendisaje como llegaste a esa conclucion, que parte de la informacion que >> postee te sirvio? >> >> Saludos y muchas gracias por la ayuda e informacion >> >> >> >> >> >> >> 2014-12-19 12:33 GMT-04:30 KyD <kyd.is.back@gmail.com>: >> >> Prueba lo siguiente : >>> >>> 1 ) export CFLAGS="-march=core-avx-i -mno-avx -mno-aes -mno-rdrnd -O2 >>> -pipe" >>> >>> 2 ) emerge --info | grep -i cflags (Esto es a modo de chequeo para ver >>> que se seteo bien CFLAGS) >>> >>> Si quedo bien seteada : >>> >>> 3) emerge -v dev-util/boost-build >>> >>> 2014-12-19 13:53 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: >>> >>>> cat /proc/cpuinfo >>>> processor : 0 >>>> vendor_id : GenuineIntel >>>> cpu family : 6 >>>> model : 58 >>>> model name : Intel(R) Pentium(R) CPU 2020M @ 2.40GHz >>>> stepping : 9 >>>> microcode : 0x19 >>>> cpu MHz : 2400.000 >>>> cache size : 2048 KB >>>> physical id : 0 >>>> siblings : 2 >>>> core id : 0 >>>> cpu cores : 2 >>>> apicid : 0 >>>> initial apicid : 0 >>>> fpu : yes >>>> fpu_exception : yes >>>> cpuid level : 13 >>>> wp : yes >>>> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge >>>> mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall >>>> nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology >>>> nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est >>>> tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt >>>> tsc_deadline_timer xsave lahf_lm arat epb xsaveopt pln pts dtherm >>>> tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms >>>> bogomips : 4789.09 >>>> clflush size : 64 >>>> cache_alignment : 64 >>>> address sizes : 36 bits physical, 48 bits virtual >>>> power management: >>>> >>>> processor : 1 >>>> vendor_id : GenuineIntel >>>> cpu family : 6 >>>> model : 58 >>>> model name : Intel(R) Pentium(R) CPU 2020M @ 2.40GHz >>>> stepping : 9 >>>> microcode : 0x19 >>>> cpu MHz : 2400.000 >>>> cache size : 2048 KB >>>> physical id : 0 >>>> siblings : 2 >>>> core id : 1 >>>> cpu cores : 2 >>>> apicid : 2 >>>> initial apicid : 2 >>>> fpu : yes >>>> fpu_exception : yes >>>> cpuid level : 13 >>>> wp : yes >>>> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge >>>> mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall >>>> nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology >>>> nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est >>>> tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt >>>> tsc_deadline_timer xsave lahf_lm arat epb xsaveopt pln pts dtherm >>>> tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms >>>> bogomips : 4789.09 >>>> clflush size : 64 >>>> cache_alignment : 64 >>>> address sizes : 36 bits physical, 48 bits virtual >>>> power management: >>>> >>>> >>>> Saludos >>>> >>>> 2014-12-19 12:13 GMT-04:30 KyD <kyd.is.back@gmail.com>: >>>> >>>> Ok , >>>>> >>>>> ¿ que procesador tienes ? >>>>> >>>>> 2014-12-19 13:12 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: >>>>> >>>>>> >>>>>> Gracias KyD >>>>>> >>>>>> # cat /etc/portage/make.conf >>>>>> # These settings were set by the catalyst build script that >>>>>> automatically >>>>>> # built this stage. >>>>>> # Please consult /usr/share/portage/config/make.conf.example for a >>>>>> more >>>>>> # detailed example. >>>>>> CFLAGS="-march=core-avx-i -O2 -pipe" >>>>>> #CFLAGS="-O2 -pipe" >>>>>> CXXFLAGS="${CFLAGS}" >>>>>> # WARNING: Changing your CHOST is not something that should be done >>>>>> lightly. >>>>>> # Please consult http://www.gentoo.org/doc/en/change-chost.xml >>>>>> before changing. >>>>>> CHOST="x86_64-pc-linux-gnu" >>>>>> # These are the USE flags that were used in addition to what is >>>>>> provided by the >>>>>> # profile used for building. >>>>>> USE="bindist mmx multiuser openrc sse sse2 symlink -systemd" >>>>>> PORTDIR="/usr/portage" >>>>>> DISTDIR="${PORTDIR}/distfiles" >>>>>> PKGDIR="${PORTDIR}/packages" >>>>>> MAKEOPTS="-j1" >>>>>> LINGUAS="es" >>>>>> ACCEPT_LICENSE="*" >>>>>> VIDEO_CARDS="intel" >>>>>> ALSA_CARDS="intel" >>>>>> INPUT_DEVICES="keyboard mouse evdev synaptics" >>>>>> >>>>>> >>>>>> GENTOO_MIRRORS="rsync://gentoo.c3sl.ufpr.br/gentoo/ >>>>>> http://gentoo.c3sl.ufpr.br/ ftp://gentoo.c3sl.ufpr.br/gentoo/ >>>>>> http://www.las.ic.unicamp.br/pub/gentoo/ >>>>>> ftp://ftp.las.ic.unicamp.br/pub/gentoo/" >>>>>> >>>>>> SYNC="rsync://rsync1.br.gentoo.org/gentoo-portage" >>>>>> >>>>>> >>>>>> Si necesitan algo mas de informacion por favor me avisan. >>>>>> >>>>>> >>>>>> Saludos >>>>>> >>>>>> 2014-12-19 11:19 GMT-04:30 KyD <kyd.is.back@gmail.com>: >>>>>> >>>>>> cat make.conf >>>>>>> >>>>>>> 2014-12-19 12:32 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: >>>>>>> >>>>>>>> Santiago gracias por tus comentarios. >>>>>>>> >>>>>>>> Igual con el mismo problema. >>>>>>>> >>>>>>>> http://pastebin.com/AquYw1GA >>>>>>>> >>>>>>>> Alguna idea mas. >>>>>>>> >>>>>>>> Saludos >>>>>>>> >>>>>>>> 2014-12-19 9:25 GMT-04:30 Santiago López Denazis < >>>>>>>> sldenazis@linux.com>: >>>>>>>> >>>>>>>> On 12/18/2014 11:45 PM, Freddy Taborda wrote: >>>>>>>>> > Hola, hace mucho que no usaba Linux y mucho menos Gentoo, ya que >>>>>>>>> no tenia >>>>>>>>> > equipo, ahora estoy haciendo una nueva instalacion >>>>>>>>> > >>>>>>>>> http://terracenter.blogspot.com/2014/12/instalacion-de-gentoo-en-una-laptop.html >>>>>>>>> > (le falta mucho a este tuto para dejarlo decente), pero al >>>>>>>>> momento de >>>>>>>>> > instalar lvm2 la compilacion me da estos errores >>>>>>>>> > >>>>>>>>> >>>>>>>>> Buenos días Freddy, si no es un problema para lo que necesitás, >>>>>>>>> intenta compilarlo con -python: >>>>>>>>> >>>>>>>>> echo dev-util/boost-build -python >> >>>>>>>>> /etc/portage/package.use >>>>>>>>> >>>>>>>>> Saludos, >>>>>>>>> >>>>>>>>> > >>>>>>>>> > >>>>>>>>> > # emerge -pv lvm2 >>>>>>>>> > >>>>>>>>> > * IMPORTANT: 5 config files in '/etc/portage' need updating. >>>>>>>>> > * See the CONFIGURATION FILES section of the emerge >>>>>>>>> > * man page to learn how to update config files. >>>>>>>>> > >>>>>>>>> > These are the packages that would be merged, in order: >>>>>>>>> > >>>>>>>>> > Calculating dependencies... done! >>>>>>>>> > [ebuild N ] dev-util/boost-build-1.55.0 USE="python -examples >>>>>>>>> {-test}" 0 >>>>>>>>> > KiB >>>>>>>>> > [ebuild N ] virtual/libudev-215-r1:0/1 USE="systemd -static-libs" >>>>>>>>> > ABI_X86="(64) (-32) (-x32)" 0 KiB >>>>>>>>> > [ebuild N ] dev-libs/boost-1.55.0-r2:0/1.55.0 USE="nls python >>>>>>>>> threads >>>>>>>>> > -context -debug -doc -icu -mpi -static-libs -tools" >>>>>>>>> > ABI_X86="(64) (-32) (-x32)" PYTHON_TARGETS="python2_7 python3_3 >>>>>>>>> -python3_4" >>>>>>>>> > 0 KiB >>>>>>>>> > [ebuild N ] sys-block/thin-provisioning-tools-0.3.2-r1 >>>>>>>>> USE="{-test}" 0 KiB >>>>>>>>> > [ebuild N ] sys-fs/lvm2-2.02.109 USE="readline systemd thin udev >>>>>>>>> (-clvm) >>>>>>>>> > (-cman) -device-mapper-only -lvm1 -lvm2create_ini >>>>>>>>> > trd (-selinux) -static -static-libs" 0 KiB >>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> > * ERROR: dev-util/boost-build-1.55.0::gentoo failed (compile >>>>>>>>> phase): >>>>>>>>> > * building bjam failed >>>>>>>>> > * >>>>>>>>> > * Call stack: >>>>>>>>> > * ebuild.sh, line 93: Called src_compile >>>>>>>>> > * environment, line 4955: Called die >>>>>>>>> > * The specific snippet of code: >>>>>>>>> > * CC=$(tc-getCC) ./build.sh ${toolset} -d+2 $(use_with python >>>>>>>>> python >>>>>>>>> > "${EROOT}"/usr) || die "building bjam failed" >>>>>>>>> > * >>>>>>>>> > * If you need support, post the output of `emerge --info >>>>>>>>> > '=dev-util/boost-build-1.55.0::gentoo'`, >>>>>>>>> > * the complete build log and the output of `emerge -pqv >>>>>>>>> > '=dev-util/boost-build-1.55.0::gentoo'`. >>>>>>>>> > * The complete build log is located at >>>>>>>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log'. >>>>>>>>> > * The ebuild environment file is located at >>>>>>>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/environment'. >>>>>>>>> > * Working directory: >>>>>>>>> > >>>>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2/engine' >>>>>>>>> > * S: >>>>>>>>> > >>>>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2' >>>>>>>>> > >>>>>>>>> >>>> Failed to emerge dev-util/boost-build-1.55.0, Log file: >>>>>>>>> > >>>>>>>>> >>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log' >>>>>>>>> > >>>>>>>>> > * Messages for package dev-util/boost-build-1.55.0: >>>>>>>>> > >>>>>>>>> > * ERROR: dev-util/boost-build-1.55.0::gentoo failed (compile >>>>>>>>> phase): >>>>>>>>> > * building bjam failed >>>>>>>>> > * >>>>>>>>> > * Call stack: >>>>>>>>> > * ebuild.sh, line 93: Called src_compile >>>>>>>>> > * environment, line 4955: Called die >>>>>>>>> > * The specific snippet of code: >>>>>>>>> > * CC=$(tc-getCC) ./build.sh ${toolset} -d+2 $(use_with python >>>>>>>>> python >>>>>>>>> > "${EROOT}"/usr) || die "building bjam failed" >>>>>>>>> > * >>>>>>>>> > * If you need support, post the output of `emerge --info >>>>>>>>> > '=dev-util/boost-build-1.55.0::gentoo'`, >>>>>>>>> > * the complete build log and the output of `emerge -pqv >>>>>>>>> > '=dev-util/boost-build-1.55.0::gentoo'`. >>>>>>>>> > * The complete build log is located at >>>>>>>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log'. >>>>>>>>> > * The ebuild environment file is located at >>>>>>>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/environment'. >>>>>>>>> > * Working directory: >>>>>>>>> > >>>>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2/engine' >>>>>>>>> > * S: >>>>>>>>> > >>>>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2' >>>>>>>>> > livecd / # >>>>>>>>> > >>>>>>>>> > # emerge --info '=dev-libs/boost-1.55.0::gentoo' >>>>>>>>> > Portage 2.2.14 (python 2.7.7-final-0, default/linux/amd64/13.0, >>>>>>>>> gcc-4.8.3, >>>>>>>>> > glibc-2.19-r1, 3.16.5-gentoo x86_64) >>>>>>>>> > ================================================================= >>>>>>>>> > System Settings >>>>>>>>> > ================================================================= >>>>>>>>> > System uname: >>>>>>>>> Linux-3.16.5-gentoo-x86_64-Intel-R-_Pentium-R-_CPU_2020M_@ >>>>>>>>> > _2.40GHz-with-gentoo-2.2 >>>>>>>>> > KiB Mem: 3927272 total, 81700 free >>>>>>>>> > KiB Swap: 2097148 total, 2096904 free >>>>>>>>> > Timestamp of tree: Thu, 18 Dec 2014 17:15:01 +0000 >>>>>>>>> > ld GNU ld (Gentoo 2.24 p1.4) 2.24 >>>>>>>>> > app-shells/bash: 4.2_p53 >>>>>>>>> > dev-lang/perl: 5.18.2-r2 >>>>>>>>> > dev-lang/python: 2.7.7, 3.3.5-r1 >>>>>>>>> > dev-util/pkgconfig: 0.28-r1 >>>>>>>>> > sys-apps/baselayout: 2.2 >>>>>>>>> > sys-apps/openrc: 0.12.4 >>>>>>>>> > sys-apps/sandbox: 2.6-r1 >>>>>>>>> > sys-devel/autoconf: 2.69 >>>>>>>>> > sys-devel/automake: 1.13.4 >>>>>>>>> > sys-devel/binutils: 2.24-r3 >>>>>>>>> > sys-devel/gcc: 4.8.3 >>>>>>>>> > sys-devel/gcc-config: 1.7.3 >>>>>>>>> > sys-devel/libtool: 2.4.2-r1 >>>>>>>>> > sys-devel/make: 4.0-r1 >>>>>>>>> > sys-kernel/linux-headers: 3.16 (virtual/os-headers) >>>>>>>>> > Repositories: gentoo >>>>>>>>> > ACCEPT_LICENSE="*" >>>>>>>>> > CBUILD="x86_64-pc-linux-gnu" >>>>>>>>> > CFLAGS="-march=core-avx-i -O2 -pipe" >>>>>>>>> > CHOST="x86_64-pc-linux-gnu" >>>>>>>>> > CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt" >>>>>>>>> > CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d >>>>>>>>> /etc/gconf >>>>>>>>> > /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc >>>>>>>>> > /terminfo" >>>>>>>>> > CXXFLAGS="-march=core-avx-i -O2 -pipe" >>>>>>>>> > DISTDIR="/usr/portage/distfiles" >>>>>>>>> > FCFLAGS="-O2 -pipe" >>>>>>>>> > FEATURES="assume-digests binpkg-logs config-protect-if-modified >>>>>>>>> distlocks >>>>>>>>> > ebuild-locks fixlafiles merge-sync news parallel-fetch >>>>>>>>> > preserve-libs protect-owned sandbox sfperms strict >>>>>>>>> unknown-features-warn >>>>>>>>> > unmerge-logs unmerge-orphans userfetch userpriv usersa >>>>>>>>> > ndbox usersync" >>>>>>>>> > FFLAGS="-O2 -pipe" >>>>>>>>> > GENTOO_MIRRORS="rsync://gentoo.c3sl.ufpr.br/gentoo/ >>>>>>>>> > http://gentoo.c3sl.ufpr.br/ ftp://gentoo.c3sl.ufpr.br/gentoo/ >>>>>>>>> http://www.las >>>>>>>>> > >>>>>>>>> > .ic.unicamp.br/pub/gentoo/ >>>>>>>>> ftp://ftp.las.ic.unicamp.br/pub/gentoo/" >>>>>>>>> > LANG="es_VE.utf8" >>>>>>>>> > LDFLAGS="-Wl,-O1 -Wl,--as-needed" >>>>>>>>> > MAKEOPTS="-j1" >>>>>>>>> > PKGDIR="/usr/portage/packages" >>>>>>>>> > PORTAGE_CONFIGROOT="/" >>>>>>>>> > PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms >>>>>>>>> --times >>>>>>>>> > --omit-dir-times --compress --force --whole-file --delete - >>>>>>>>> > -stats --human-readable --timeout=180 --exclude=/distfiles >>>>>>>>> --exclude=/local >>>>>>>>> > --exclude=/packages" >>>>>>>>> > PORTAGE_TMPDIR="/var/tmp" >>>>>>>>> > PORTDIR="/usr/portage" >>>>>>>>> > PORTDIR_OVERLAY="" >>>>>>>>> > SYNC="rsync://rsync1.br.gentoo.org/gentoo-portage" >>>>>>>>> > USE="acl amd64 berkdb bindist bzip2 cli cracklib crypt cxx dri >>>>>>>>> fortran gdbm >>>>>>>>> > iconv ipv6 mmx modules multilib multiuser ncurses nl >>>>>>>>> > s nptl openmp pam pcre python readline session sse sse2 ssl >>>>>>>>> systemd tcpd >>>>>>>>> > unicode zlib" ABI_X86="64" ALSA_CARDS="intel" APACHE2_M >>>>>>>>> > ODULES="authn_core authz_core socache_shmcb unixd actions alias >>>>>>>>> auth_basic >>>>>>>>> > authn_alias authn_anon authn_dbm authn_default authn_ >>>>>>>>> > file authz_dbm authz_default authz_groupfile authz_host >>>>>>>>> authz_owner >>>>>>>>> > authz_user autoindex cache cgi cgid dav dav_fs dav_lock defl >>>>>>>>> > ate dir disk_cache env expires ext_filter file_cache filter >>>>>>>>> headers include >>>>>>>>> > info log_config logio mem_cache mime mime_magic nego >>>>>>>>> > tiation rewrite setenvif speling status unique_id userdir >>>>>>>>> usertrack >>>>>>>>> > vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets >>>>>>>>> > stage tables krita karbon braindump author" CAMERAS="ptp2" >>>>>>>>> > COLLECTD_PLUGINS="df interface irq load memory rrdtool swap >>>>>>>>> syslog" E >>>>>>>>> > LIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore >>>>>>>>> fv18 garmin >>>>>>>>> > garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oce >>>>>>>>> > anserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 >>>>>>>>> timing tsip >>>>>>>>> > tripmate tnt ublox ubx" INPUT_DEVICES="keyboard mouse e >>>>>>>>> > vdev synaptics" KERNEL="linux" LCD_DEVICES="bayrad cfontz >>>>>>>>> cfontz633 glk >>>>>>>>> > hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_E >>>>>>>>> > XTENSIONS="presenter-console presenter-minimizer" LINGUAS="es" >>>>>>>>> > OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-5" PYTHON_S >>>>>>>>> > INGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_3" >>>>>>>>> > RUBY_TARGETS="ruby19 ruby20" USERLAND="GNU" VIDEO_CARDS="intel" >>>>>>>>> XT >>>>>>>>> > ABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset >>>>>>>>> ipp2p iface >>>>>>>>> > geoip fuzzy condition tee tarpit sysrq steal rawnat >>>>>>>>> > logmark ipmark dhcpmac delude chaos account" >>>>>>>>> > Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, >>>>>>>>> LC_ALL, >>>>>>>>> > PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRES >>>>>>>>> > S_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON >>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> > Muchas gracias por la ayuda que me puedan dar, ya que no he >>>>>>>>> encontrado >>>>>>>>> > referencia a esa version, trate de montar la r1, pero tambien me >>>>>>>>> sale >>>>>>>>> > error. >>>>>>>>> > >>>>>>>>> > >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> Santiago López Denazis >>>>>>>>> GNU/Linux SysAdmin >>>>>>>>> sldenazis@linux.com >>>>>>>>> Free your source, free your mind. >>>>>>>>> ---- >>>>>>>>> Por favor, no utilice formatos de archivo privativos para el >>>>>>>>> intercambio >>>>>>>>> de documentos, como DOC y XLS, sino HTML, PDF, TXT, CSV o >>>>>>>>> cualquier otro >>>>>>>>> que no obligue a utilizar un programa de un fabricante concreto. >>>>>>>>> Vea >>>>>>>>> http://www.gnu.org/philosophy/no-word-attachments.es.html >>>>>>>>> -- >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> >>>>>>>> Freddy Taborda >>>>>>>> Consultor Técnico >>>>>>>> Valencia - Venezuela >>>>>>>> GNU/Linux user #283478 >>>>>>>> ECE #208825114 >>>>>>>> >>>>>>>> >>>>>>>> What gets us into trouble is not what we don't know. It's what we >>>>>>>> know for sure that just ain't so. >>>>>>>> >>>>>>>> Mark Twain >>>>>>>> >>>>>>>> "Those that can, do. Those that can’t, complain." >>>>>>>> Linus Torvalds >>>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> >>>>>> Freddy Taborda >>>>>> Consultor Técnico >>>>>> Valencia - Venezuela >>>>>> GNU/Linux user #283478 >>>>>> ECE #208825114 >>>>>> >>>>>> >>>>>> What gets us into trouble is not what we don't know. It's what we >>>>>> know for sure that just ain't so. >>>>>> >>>>>> Mark Twain >>>>>> >>>>>> "Those that can, do. Those that can’t, complain." >>>>>> Linus Torvalds >>>>>> >>>>> >>>> >>>> >>>> -- >>>> >>>> Freddy Taborda >>>> Consultor Técnico >>>> Valencia - Venezuela >>>> GNU/Linux user #283478 >>>> ECE #208825114 >>>> >>>> >>>> What gets us into trouble is not what we don't know. It's what we know >>>> for sure that just ain't so. >>>> >>>> Mark Twain >>>> >>>> "Those that can, do. Those that can’t, complain." >>>> Linus Torvalds >>>> >>> >> >> >> -- >> >> Freddy Taborda >> Consultor Técnico >> Valencia - Venezuela >> GNU/Linux user #283478 >> ECE #208825114 >> >> >> What gets us into trouble is not what we don't know. It's what we know >> for sure that just ain't so. >> >> Mark Twain >> >> "Those that can, do. Those that can’t, complain." >> Linus Torvalds >> > -- Freddy Taborda Consultor Técnico Valencia - Venezuela GNU/Linux user #283478 ECE #208825114 What gets us into trouble is not what we don't know. It's what we know for sure that just ain't so. Mark Twain "Those that can, do. Those that can’t, complain." Linus Torvalds [-- Attachment #2: Type: text/html, Size: 26616 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user-es] ERROR: dev-util/boost-build-1.55.0::gentoo failed 2014-12-19 19:05 ` Freddy Taborda @ 2014-12-19 19:17 ` KyD 2014-12-19 19:55 ` Freddy Taborda 0 siblings, 1 reply; 14+ messages in thread From: KyD @ 2014-12-19 19:17 UTC (permalink / raw To: gentoo-user-es [-- Attachment #1: Type: text/plain, Size: 21116 bytes --] a través del ( model name ) Y deberías ir de a poco re-compilando las apps. 2014-12-19 16:05 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: > > Muchas gracias, pero perdona como se yo que parte la info del "microprocesador" > me indica lo de los CFLAGS? > > Ya cambie los CFLAGS del make.conf, deberia recompilar todo de nuevo con > la nueva configuracion? > > Muchas gracias. > > 2014-12-19 14:01 GMT-04:30 KyD <kyd.is.back@gmail.com>: > > A través de tu make.conf y de tu tipo de microprocesador. >> >> Creo que rendirá mejor si modificas tu CFLAGS de tu make.conf con la que >> te eh pasado. >> >> 2014-12-19 15:17 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: >> >>> Esrtimado KyD >>> >>> Funciono sin problemas, ahora se esta compilando el LVM2, pero tengo >>> una duda yo tome el la configuracon iki.gentoo.org/wiki/Safe_CFLAGS >>> Core i3/i5/i7 & Xeon E3/E5/E7 *V1 y hasta el momento todos los paquetes >>> estaban compilando sin problema, y tu me estas pasando la configuracion >>> Pentium y el paquete dev-util/boost-build-1.55.0::gentoo compilo sin >>> problema y al momento de estar eascribiendo esto se esta >>> compilando el resto de los que se necesita para LMV2, a manera de >>> aprendisaje como llegaste a esa conclucion, que parte de la informacion que >>> postee te sirvio? >>> >>> Saludos y muchas gracias por la ayuda e informacion >>> >>> >>> >>> >>> >>> >>> 2014-12-19 12:33 GMT-04:30 KyD <kyd.is.back@gmail.com>: >>> >>> Prueba lo siguiente : >>>> >>>> 1 ) export CFLAGS="-march=core-avx-i -mno-avx -mno-aes -mno-rdrnd -O2 >>>> -pipe" >>>> >>>> 2 ) emerge --info | grep -i cflags (Esto es a modo de chequeo para ver >>>> que se seteo bien CFLAGS) >>>> >>>> Si quedo bien seteada : >>>> >>>> 3) emerge -v dev-util/boost-build >>>> >>>> 2014-12-19 13:53 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: >>>> >>>>> cat /proc/cpuinfo >>>>> processor : 0 >>>>> vendor_id : GenuineIntel >>>>> cpu family : 6 >>>>> model : 58 >>>>> model name : Intel(R) Pentium(R) CPU 2020M @ 2.40GHz >>>>> stepping : 9 >>>>> microcode : 0x19 >>>>> cpu MHz : 2400.000 >>>>> cache size : 2048 KB >>>>> physical id : 0 >>>>> siblings : 2 >>>>> core id : 0 >>>>> cpu cores : 2 >>>>> apicid : 0 >>>>> initial apicid : 0 >>>>> fpu : yes >>>>> fpu_exception : yes >>>>> cpuid level : 13 >>>>> wp : yes >>>>> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge >>>>> mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall >>>>> nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology >>>>> nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est >>>>> tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt >>>>> tsc_deadline_timer xsave lahf_lm arat epb xsaveopt pln pts dtherm >>>>> tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms >>>>> bogomips : 4789.09 >>>>> clflush size : 64 >>>>> cache_alignment : 64 >>>>> address sizes : 36 bits physical, 48 bits virtual >>>>> power management: >>>>> >>>>> processor : 1 >>>>> vendor_id : GenuineIntel >>>>> cpu family : 6 >>>>> model : 58 >>>>> model name : Intel(R) Pentium(R) CPU 2020M @ 2.40GHz >>>>> stepping : 9 >>>>> microcode : 0x19 >>>>> cpu MHz : 2400.000 >>>>> cache size : 2048 KB >>>>> physical id : 0 >>>>> siblings : 2 >>>>> core id : 1 >>>>> cpu cores : 2 >>>>> apicid : 2 >>>>> initial apicid : 2 >>>>> fpu : yes >>>>> fpu_exception : yes >>>>> cpuid level : 13 >>>>> wp : yes >>>>> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge >>>>> mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall >>>>> nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology >>>>> nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est >>>>> tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt >>>>> tsc_deadline_timer xsave lahf_lm arat epb xsaveopt pln pts dtherm >>>>> tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms >>>>> bogomips : 4789.09 >>>>> clflush size : 64 >>>>> cache_alignment : 64 >>>>> address sizes : 36 bits physical, 48 bits virtual >>>>> power management: >>>>> >>>>> >>>>> Saludos >>>>> >>>>> 2014-12-19 12:13 GMT-04:30 KyD <kyd.is.back@gmail.com>: >>>>> >>>>> Ok , >>>>>> >>>>>> ¿ que procesador tienes ? >>>>>> >>>>>> 2014-12-19 13:12 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: >>>>>> >>>>>>> >>>>>>> Gracias KyD >>>>>>> >>>>>>> # cat /etc/portage/make.conf >>>>>>> # These settings were set by the catalyst build script that >>>>>>> automatically >>>>>>> # built this stage. >>>>>>> # Please consult /usr/share/portage/config/make.conf.example for a >>>>>>> more >>>>>>> # detailed example. >>>>>>> CFLAGS="-march=core-avx-i -O2 -pipe" >>>>>>> #CFLAGS="-O2 -pipe" >>>>>>> CXXFLAGS="${CFLAGS}" >>>>>>> # WARNING: Changing your CHOST is not something that should be done >>>>>>> lightly. >>>>>>> # Please consult http://www.gentoo.org/doc/en/change-chost.xml >>>>>>> before changing. >>>>>>> CHOST="x86_64-pc-linux-gnu" >>>>>>> # These are the USE flags that were used in addition to what is >>>>>>> provided by the >>>>>>> # profile used for building. >>>>>>> USE="bindist mmx multiuser openrc sse sse2 symlink -systemd" >>>>>>> PORTDIR="/usr/portage" >>>>>>> DISTDIR="${PORTDIR}/distfiles" >>>>>>> PKGDIR="${PORTDIR}/packages" >>>>>>> MAKEOPTS="-j1" >>>>>>> LINGUAS="es" >>>>>>> ACCEPT_LICENSE="*" >>>>>>> VIDEO_CARDS="intel" >>>>>>> ALSA_CARDS="intel" >>>>>>> INPUT_DEVICES="keyboard mouse evdev synaptics" >>>>>>> >>>>>>> >>>>>>> GENTOO_MIRRORS="rsync://gentoo.c3sl.ufpr.br/gentoo/ >>>>>>> http://gentoo.c3sl.ufpr.br/ ftp://gentoo.c3sl.ufpr.br/gentoo/ >>>>>>> http://www.las.ic.unicamp.br/pub/gentoo/ >>>>>>> ftp://ftp.las.ic.unicamp.br/pub/gentoo/" >>>>>>> >>>>>>> SYNC="rsync://rsync1.br.gentoo.org/gentoo-portage" >>>>>>> >>>>>>> >>>>>>> Si necesitan algo mas de informacion por favor me avisan. >>>>>>> >>>>>>> >>>>>>> Saludos >>>>>>> >>>>>>> 2014-12-19 11:19 GMT-04:30 KyD <kyd.is.back@gmail.com>: >>>>>>> >>>>>>> cat make.conf >>>>>>>> >>>>>>>> 2014-12-19 12:32 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: >>>>>>>> >>>>>>>>> Santiago gracias por tus comentarios. >>>>>>>>> >>>>>>>>> Igual con el mismo problema. >>>>>>>>> >>>>>>>>> http://pastebin.com/AquYw1GA >>>>>>>>> >>>>>>>>> Alguna idea mas. >>>>>>>>> >>>>>>>>> Saludos >>>>>>>>> >>>>>>>>> 2014-12-19 9:25 GMT-04:30 Santiago López Denazis < >>>>>>>>> sldenazis@linux.com>: >>>>>>>>> >>>>>>>>> On 12/18/2014 11:45 PM, Freddy Taborda wrote: >>>>>>>>>> > Hola, hace mucho que no usaba Linux y mucho menos Gentoo, ya >>>>>>>>>> que no tenia >>>>>>>>>> > equipo, ahora estoy haciendo una nueva instalacion >>>>>>>>>> > >>>>>>>>>> http://terracenter.blogspot.com/2014/12/instalacion-de-gentoo-en-una-laptop.html >>>>>>>>>> > (le falta mucho a este tuto para dejarlo decente), pero al >>>>>>>>>> momento de >>>>>>>>>> > instalar lvm2 la compilacion me da estos errores >>>>>>>>>> > >>>>>>>>>> >>>>>>>>>> Buenos días Freddy, si no es un problema para lo que necesitás, >>>>>>>>>> intenta compilarlo con -python: >>>>>>>>>> >>>>>>>>>> echo dev-util/boost-build -python >> >>>>>>>>>> /etc/portage/package.use >>>>>>>>>> >>>>>>>>>> Saludos, >>>>>>>>>> >>>>>>>>>> > >>>>>>>>>> > >>>>>>>>>> > # emerge -pv lvm2 >>>>>>>>>> > >>>>>>>>>> > * IMPORTANT: 5 config files in '/etc/portage' need updating. >>>>>>>>>> > * See the CONFIGURATION FILES section of the emerge >>>>>>>>>> > * man page to learn how to update config files. >>>>>>>>>> > >>>>>>>>>> > These are the packages that would be merged, in order: >>>>>>>>>> > >>>>>>>>>> > Calculating dependencies... done! >>>>>>>>>> > [ebuild N ] dev-util/boost-build-1.55.0 USE="python -examples >>>>>>>>>> {-test}" 0 >>>>>>>>>> > KiB >>>>>>>>>> > [ebuild N ] virtual/libudev-215-r1:0/1 USE="systemd >>>>>>>>>> -static-libs" >>>>>>>>>> > ABI_X86="(64) (-32) (-x32)" 0 KiB >>>>>>>>>> > [ebuild N ] dev-libs/boost-1.55.0-r2:0/1.55.0 USE="nls python >>>>>>>>>> threads >>>>>>>>>> > -context -debug -doc -icu -mpi -static-libs -tools" >>>>>>>>>> > ABI_X86="(64) (-32) (-x32)" PYTHON_TARGETS="python2_7 python3_3 >>>>>>>>>> -python3_4" >>>>>>>>>> > 0 KiB >>>>>>>>>> > [ebuild N ] sys-block/thin-provisioning-tools-0.3.2-r1 >>>>>>>>>> USE="{-test}" 0 KiB >>>>>>>>>> > [ebuild N ] sys-fs/lvm2-2.02.109 USE="readline systemd thin >>>>>>>>>> udev (-clvm) >>>>>>>>>> > (-cman) -device-mapper-only -lvm1 -lvm2create_ini >>>>>>>>>> > trd (-selinux) -static -static-libs" 0 KiB >>>>>>>>>> > >>>>>>>>>> > >>>>>>>>>> > >>>>>>>>>> > * ERROR: dev-util/boost-build-1.55.0::gentoo failed (compile >>>>>>>>>> phase): >>>>>>>>>> > * building bjam failed >>>>>>>>>> > * >>>>>>>>>> > * Call stack: >>>>>>>>>> > * ebuild.sh, line 93: Called src_compile >>>>>>>>>> > * environment, line 4955: Called die >>>>>>>>>> > * The specific snippet of code: >>>>>>>>>> > * CC=$(tc-getCC) ./build.sh ${toolset} -d+2 $(use_with python >>>>>>>>>> python >>>>>>>>>> > "${EROOT}"/usr) || die "building bjam failed" >>>>>>>>>> > * >>>>>>>>>> > * If you need support, post the output of `emerge --info >>>>>>>>>> > '=dev-util/boost-build-1.55.0::gentoo'`, >>>>>>>>>> > * the complete build log and the output of `emerge -pqv >>>>>>>>>> > '=dev-util/boost-build-1.55.0::gentoo'`. >>>>>>>>>> > * The complete build log is located at >>>>>>>>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log'. >>>>>>>>>> > * The ebuild environment file is located at >>>>>>>>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/environment'. >>>>>>>>>> > * Working directory: >>>>>>>>>> > >>>>>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2/engine' >>>>>>>>>> > * S: >>>>>>>>>> > >>>>>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2' >>>>>>>>>> > >>>>>>>>>> >>>> Failed to emerge dev-util/boost-build-1.55.0, Log file: >>>>>>>>>> > >>>>>>>>>> >>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log' >>>>>>>>>> > >>>>>>>>>> > * Messages for package dev-util/boost-build-1.55.0: >>>>>>>>>> > >>>>>>>>>> > * ERROR: dev-util/boost-build-1.55.0::gentoo failed (compile >>>>>>>>>> phase): >>>>>>>>>> > * building bjam failed >>>>>>>>>> > * >>>>>>>>>> > * Call stack: >>>>>>>>>> > * ebuild.sh, line 93: Called src_compile >>>>>>>>>> > * environment, line 4955: Called die >>>>>>>>>> > * The specific snippet of code: >>>>>>>>>> > * CC=$(tc-getCC) ./build.sh ${toolset} -d+2 $(use_with python >>>>>>>>>> python >>>>>>>>>> > "${EROOT}"/usr) || die "building bjam failed" >>>>>>>>>> > * >>>>>>>>>> > * If you need support, post the output of `emerge --info >>>>>>>>>> > '=dev-util/boost-build-1.55.0::gentoo'`, >>>>>>>>>> > * the complete build log and the output of `emerge -pqv >>>>>>>>>> > '=dev-util/boost-build-1.55.0::gentoo'`. >>>>>>>>>> > * The complete build log is located at >>>>>>>>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log'. >>>>>>>>>> > * The ebuild environment file is located at >>>>>>>>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/environment'. >>>>>>>>>> > * Working directory: >>>>>>>>>> > >>>>>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2/engine' >>>>>>>>>> > * S: >>>>>>>>>> > >>>>>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2' >>>>>>>>>> > livecd / # >>>>>>>>>> > >>>>>>>>>> > # emerge --info '=dev-libs/boost-1.55.0::gentoo' >>>>>>>>>> > Portage 2.2.14 (python 2.7.7-final-0, default/linux/amd64/13.0, >>>>>>>>>> gcc-4.8.3, >>>>>>>>>> > glibc-2.19-r1, 3.16.5-gentoo x86_64) >>>>>>>>>> > >>>>>>>>>> ================================================================= >>>>>>>>>> > System Settings >>>>>>>>>> > >>>>>>>>>> ================================================================= >>>>>>>>>> > System uname: >>>>>>>>>> Linux-3.16.5-gentoo-x86_64-Intel-R-_Pentium-R-_CPU_2020M_@ >>>>>>>>>> > _2.40GHz-with-gentoo-2.2 >>>>>>>>>> > KiB Mem: 3927272 total, 81700 free >>>>>>>>>> > KiB Swap: 2097148 total, 2096904 free >>>>>>>>>> > Timestamp of tree: Thu, 18 Dec 2014 17:15:01 +0000 >>>>>>>>>> > ld GNU ld (Gentoo 2.24 p1.4) 2.24 >>>>>>>>>> > app-shells/bash: 4.2_p53 >>>>>>>>>> > dev-lang/perl: 5.18.2-r2 >>>>>>>>>> > dev-lang/python: 2.7.7, 3.3.5-r1 >>>>>>>>>> > dev-util/pkgconfig: 0.28-r1 >>>>>>>>>> > sys-apps/baselayout: 2.2 >>>>>>>>>> > sys-apps/openrc: 0.12.4 >>>>>>>>>> > sys-apps/sandbox: 2.6-r1 >>>>>>>>>> > sys-devel/autoconf: 2.69 >>>>>>>>>> > sys-devel/automake: 1.13.4 >>>>>>>>>> > sys-devel/binutils: 2.24-r3 >>>>>>>>>> > sys-devel/gcc: 4.8.3 >>>>>>>>>> > sys-devel/gcc-config: 1.7.3 >>>>>>>>>> > sys-devel/libtool: 2.4.2-r1 >>>>>>>>>> > sys-devel/make: 4.0-r1 >>>>>>>>>> > sys-kernel/linux-headers: 3.16 (virtual/os-headers) >>>>>>>>>> > Repositories: gentoo >>>>>>>>>> > ACCEPT_LICENSE="*" >>>>>>>>>> > CBUILD="x86_64-pc-linux-gnu" >>>>>>>>>> > CFLAGS="-march=core-avx-i -O2 -pipe" >>>>>>>>>> > CHOST="x86_64-pc-linux-gnu" >>>>>>>>>> > CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt" >>>>>>>>>> > CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d >>>>>>>>>> /etc/gconf >>>>>>>>>> > /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc >>>>>>>>>> > /terminfo" >>>>>>>>>> > CXXFLAGS="-march=core-avx-i -O2 -pipe" >>>>>>>>>> > DISTDIR="/usr/portage/distfiles" >>>>>>>>>> > FCFLAGS="-O2 -pipe" >>>>>>>>>> > FEATURES="assume-digests binpkg-logs config-protect-if-modified >>>>>>>>>> distlocks >>>>>>>>>> > ebuild-locks fixlafiles merge-sync news parallel-fetch >>>>>>>>>> > preserve-libs protect-owned sandbox sfperms strict >>>>>>>>>> unknown-features-warn >>>>>>>>>> > unmerge-logs unmerge-orphans userfetch userpriv usersa >>>>>>>>>> > ndbox usersync" >>>>>>>>>> > FFLAGS="-O2 -pipe" >>>>>>>>>> > GENTOO_MIRRORS="rsync://gentoo.c3sl.ufpr.br/gentoo/ >>>>>>>>>> > http://gentoo.c3sl.ufpr.br/ ftp://gentoo.c3sl.ufpr.br/gentoo/ >>>>>>>>>> http://www.las >>>>>>>>>> > >>>>>>>>>> > .ic.unicamp.br/pub/gentoo/ >>>>>>>>>> ftp://ftp.las.ic.unicamp.br/pub/gentoo/" >>>>>>>>>> > LANG="es_VE.utf8" >>>>>>>>>> > LDFLAGS="-Wl,-O1 -Wl,--as-needed" >>>>>>>>>> > MAKEOPTS="-j1" >>>>>>>>>> > PKGDIR="/usr/portage/packages" >>>>>>>>>> > PORTAGE_CONFIGROOT="/" >>>>>>>>>> > PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms >>>>>>>>>> --times >>>>>>>>>> > --omit-dir-times --compress --force --whole-file --delete - >>>>>>>>>> > -stats --human-readable --timeout=180 --exclude=/distfiles >>>>>>>>>> --exclude=/local >>>>>>>>>> > --exclude=/packages" >>>>>>>>>> > PORTAGE_TMPDIR="/var/tmp" >>>>>>>>>> > PORTDIR="/usr/portage" >>>>>>>>>> > PORTDIR_OVERLAY="" >>>>>>>>>> > SYNC="rsync://rsync1.br.gentoo.org/gentoo-portage" >>>>>>>>>> > USE="acl amd64 berkdb bindist bzip2 cli cracklib crypt cxx dri >>>>>>>>>> fortran gdbm >>>>>>>>>> > iconv ipv6 mmx modules multilib multiuser ncurses nl >>>>>>>>>> > s nptl openmp pam pcre python readline session sse sse2 ssl >>>>>>>>>> systemd tcpd >>>>>>>>>> > unicode zlib" ABI_X86="64" ALSA_CARDS="intel" APACHE2_M >>>>>>>>>> > ODULES="authn_core authz_core socache_shmcb unixd actions alias >>>>>>>>>> auth_basic >>>>>>>>>> > authn_alias authn_anon authn_dbm authn_default authn_ >>>>>>>>>> > file authz_dbm authz_default authz_groupfile authz_host >>>>>>>>>> authz_owner >>>>>>>>>> > authz_user autoindex cache cgi cgid dav dav_fs dav_lock defl >>>>>>>>>> > ate dir disk_cache env expires ext_filter file_cache filter >>>>>>>>>> headers include >>>>>>>>>> > info log_config logio mem_cache mime mime_magic nego >>>>>>>>>> > tiation rewrite setenvif speling status unique_id userdir >>>>>>>>>> usertrack >>>>>>>>>> > vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets >>>>>>>>>> > stage tables krita karbon braindump author" CAMERAS="ptp2" >>>>>>>>>> > COLLECTD_PLUGINS="df interface irq load memory rrdtool swap >>>>>>>>>> syslog" E >>>>>>>>>> > LIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore >>>>>>>>>> fv18 garmin >>>>>>>>>> > garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oce >>>>>>>>>> > anserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 >>>>>>>>>> timing tsip >>>>>>>>>> > tripmate tnt ublox ubx" INPUT_DEVICES="keyboard mouse e >>>>>>>>>> > vdev synaptics" KERNEL="linux" LCD_DEVICES="bayrad cfontz >>>>>>>>>> cfontz633 glk >>>>>>>>>> > hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_E >>>>>>>>>> > XTENSIONS="presenter-console presenter-minimizer" LINGUAS="es" >>>>>>>>>> > OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-5" >>>>>>>>>> PYTHON_S >>>>>>>>>> > INGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_3" >>>>>>>>>> > RUBY_TARGETS="ruby19 ruby20" USERLAND="GNU" VIDEO_CARDS="intel" >>>>>>>>>> XT >>>>>>>>>> > ABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset >>>>>>>>>> ipp2p iface >>>>>>>>>> > geoip fuzzy condition tee tarpit sysrq steal rawnat >>>>>>>>>> > logmark ipmark dhcpmac delude chaos account" >>>>>>>>>> > Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, >>>>>>>>>> LC_ALL, >>>>>>>>>> > PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRES >>>>>>>>>> > S_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON >>>>>>>>>> > >>>>>>>>>> > >>>>>>>>>> > >>>>>>>>>> > >>>>>>>>>> > Muchas gracias por la ayuda que me puedan dar, ya que no he >>>>>>>>>> encontrado >>>>>>>>>> > referencia a esa version, trate de montar la r1, pero tambien >>>>>>>>>> me sale >>>>>>>>>> > error. >>>>>>>>>> > >>>>>>>>>> > >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> Santiago López Denazis >>>>>>>>>> GNU/Linux SysAdmin >>>>>>>>>> sldenazis@linux.com >>>>>>>>>> Free your source, free your mind. >>>>>>>>>> ---- >>>>>>>>>> Por favor, no utilice formatos de archivo privativos para el >>>>>>>>>> intercambio >>>>>>>>>> de documentos, como DOC y XLS, sino HTML, PDF, TXT, CSV o >>>>>>>>>> cualquier otro >>>>>>>>>> que no obligue a utilizar un programa de un fabricante concreto. >>>>>>>>>> Vea >>>>>>>>>> http://www.gnu.org/philosophy/no-word-attachments.es.html >>>>>>>>>> -- >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> >>>>>>>>> Freddy Taborda >>>>>>>>> Consultor Técnico >>>>>>>>> Valencia - Venezuela >>>>>>>>> GNU/Linux user #283478 >>>>>>>>> ECE #208825114 >>>>>>>>> >>>>>>>>> >>>>>>>>> What gets us into trouble is not what we don't know. It's what we >>>>>>>>> know for sure that just ain't so. >>>>>>>>> >>>>>>>>> Mark Twain >>>>>>>>> >>>>>>>>> "Those that can, do. Those that can’t, complain." >>>>>>>>> Linus Torvalds >>>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> >>>>>>> Freddy Taborda >>>>>>> Consultor Técnico >>>>>>> Valencia - Venezuela >>>>>>> GNU/Linux user #283478 >>>>>>> ECE #208825114 >>>>>>> >>>>>>> >>>>>>> What gets us into trouble is not what we don't know. It's what we >>>>>>> know for sure that just ain't so. >>>>>>> >>>>>>> Mark Twain >>>>>>> >>>>>>> "Those that can, do. Those that can’t, complain." >>>>>>> Linus Torvalds >>>>>>> >>>>>> >>>>> >>>>> >>>>> -- >>>>> >>>>> Freddy Taborda >>>>> Consultor Técnico >>>>> Valencia - Venezuela >>>>> GNU/Linux user #283478 >>>>> ECE #208825114 >>>>> >>>>> >>>>> What gets us into trouble is not what we don't know. It's what we know >>>>> for sure that just ain't so. >>>>> >>>>> Mark Twain >>>>> >>>>> "Those that can, do. Those that can’t, complain." >>>>> Linus Torvalds >>>>> >>>> >>> >>> >>> -- >>> >>> Freddy Taborda >>> Consultor Técnico >>> Valencia - Venezuela >>> GNU/Linux user #283478 >>> ECE #208825114 >>> >>> >>> What gets us into trouble is not what we don't know. It's what we know >>> for sure that just ain't so. >>> >>> Mark Twain >>> >>> "Those that can, do. Those that can’t, complain." >>> Linus Torvalds >>> >> > > > -- > > Freddy Taborda > Consultor Técnico > Valencia - Venezuela > GNU/Linux user #283478 > ECE #208825114 > > > What gets us into trouble is not what we don't know. It's what we know for > sure that just ain't so. > > Mark Twain > > "Those that can, do. Those that can’t, complain." > Linus Torvalds > [-- Attachment #2: Type: text/html, Size: 27093 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user-es] ERROR: dev-util/boost-build-1.55.0::gentoo failed 2014-12-19 19:17 ` KyD @ 2014-12-19 19:55 ` Freddy Taborda 2014-12-19 20:00 ` KyD 0 siblings, 1 reply; 14+ messages in thread From: Freddy Taborda @ 2014-12-19 19:55 UTC (permalink / raw To: gentoo-user-es [-- Attachment #1: Type: text/plain, Size: 22206 bytes --] Gracias por la ayuda y la informacion. Saludos 2014-12-19 14:47 GMT-04:30 KyD <kyd.is.back@gmail.com>: > a través del ( model name ) > > Y deberías ir de a poco re-compilando las apps. > > 2014-12-19 16:05 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: > >> Muchas gracias, pero perdona como se yo que parte la info del "microprocesador" >> me indica lo de los CFLAGS? >> >> Ya cambie los CFLAGS del make.conf, deberia recompilar todo de nuevo con >> la nueva configuracion? >> >> Muchas gracias. >> >> 2014-12-19 14:01 GMT-04:30 KyD <kyd.is.back@gmail.com>: >> >> A través de tu make.conf y de tu tipo de microprocesador. >>> >>> Creo que rendirá mejor si modificas tu CFLAGS de tu make.conf con la que >>> te eh pasado. >>> >>> 2014-12-19 15:17 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: >>> >>>> Esrtimado KyD >>>> >>>> Funciono sin problemas, ahora se esta compilando el LVM2, pero tengo >>>> una duda yo tome el la configuracon iki.gentoo.org/wiki/Safe_CFLAGS >>>> Core i3/i5/i7 & Xeon E3/E5/E7 *V1 y hasta el momento todos los paquetes >>>> estaban compilando sin problema, y tu me estas pasando la configuracion >>>> Pentium y el paquete dev-util/boost-build-1.55.0::gentoo compilo sin >>>> problema y al momento de estar eascribiendo esto se esta >>>> compilando el resto de los que se necesita para LMV2, a manera de >>>> aprendisaje como llegaste a esa conclucion, que parte de la informacion que >>>> postee te sirvio? >>>> >>>> Saludos y muchas gracias por la ayuda e informacion >>>> >>>> >>>> >>>> >>>> >>>> >>>> 2014-12-19 12:33 GMT-04:30 KyD <kyd.is.back@gmail.com>: >>>> >>>> Prueba lo siguiente : >>>>> >>>>> 1 ) export CFLAGS="-march=core-avx-i -mno-avx -mno-aes -mno-rdrnd -O2 >>>>> -pipe" >>>>> >>>>> 2 ) emerge --info | grep -i cflags (Esto es a modo de chequeo para ver >>>>> que se seteo bien CFLAGS) >>>>> >>>>> Si quedo bien seteada : >>>>> >>>>> 3) emerge -v dev-util/boost-build >>>>> >>>>> 2014-12-19 13:53 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: >>>>> >>>>>> cat /proc/cpuinfo >>>>>> processor : 0 >>>>>> vendor_id : GenuineIntel >>>>>> cpu family : 6 >>>>>> model : 58 >>>>>> model name : Intel(R) Pentium(R) CPU 2020M @ 2.40GHz >>>>>> stepping : 9 >>>>>> microcode : 0x19 >>>>>> cpu MHz : 2400.000 >>>>>> cache size : 2048 KB >>>>>> physical id : 0 >>>>>> siblings : 2 >>>>>> core id : 0 >>>>>> cpu cores : 2 >>>>>> apicid : 0 >>>>>> initial apicid : 0 >>>>>> fpu : yes >>>>>> fpu_exception : yes >>>>>> cpuid level : 13 >>>>>> wp : yes >>>>>> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr >>>>>> pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe >>>>>> syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl >>>>>> xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor >>>>>> ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt >>>>>> tsc_deadline_timer xsave lahf_lm arat epb xsaveopt pln pts dtherm >>>>>> tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms >>>>>> bogomips : 4789.09 >>>>>> clflush size : 64 >>>>>> cache_alignment : 64 >>>>>> address sizes : 36 bits physical, 48 bits virtual >>>>>> power management: >>>>>> >>>>>> processor : 1 >>>>>> vendor_id : GenuineIntel >>>>>> cpu family : 6 >>>>>> model : 58 >>>>>> model name : Intel(R) Pentium(R) CPU 2020M @ 2.40GHz >>>>>> stepping : 9 >>>>>> microcode : 0x19 >>>>>> cpu MHz : 2400.000 >>>>>> cache size : 2048 KB >>>>>> physical id : 0 >>>>>> siblings : 2 >>>>>> core id : 1 >>>>>> cpu cores : 2 >>>>>> apicid : 2 >>>>>> initial apicid : 2 >>>>>> fpu : yes >>>>>> fpu_exception : yes >>>>>> cpuid level : 13 >>>>>> wp : yes >>>>>> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr >>>>>> pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe >>>>>> syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl >>>>>> xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor >>>>>> ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt >>>>>> tsc_deadline_timer xsave lahf_lm arat epb xsaveopt pln pts dtherm >>>>>> tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms >>>>>> bogomips : 4789.09 >>>>>> clflush size : 64 >>>>>> cache_alignment : 64 >>>>>> address sizes : 36 bits physical, 48 bits virtual >>>>>> power management: >>>>>> >>>>>> >>>>>> Saludos >>>>>> >>>>>> 2014-12-19 12:13 GMT-04:30 KyD <kyd.is.back@gmail.com>: >>>>>> >>>>>> Ok , >>>>>>> >>>>>>> ¿ que procesador tienes ? >>>>>>> >>>>>>> 2014-12-19 13:12 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: >>>>>>> >>>>>>>> >>>>>>>> Gracias KyD >>>>>>>> >>>>>>>> # cat /etc/portage/make.conf >>>>>>>> # These settings were set by the catalyst build script that >>>>>>>> automatically >>>>>>>> # built this stage. >>>>>>>> # Please consult /usr/share/portage/config/make.conf.example for a >>>>>>>> more >>>>>>>> # detailed example. >>>>>>>> CFLAGS="-march=core-avx-i -O2 -pipe" >>>>>>>> #CFLAGS="-O2 -pipe" >>>>>>>> CXXFLAGS="${CFLAGS}" >>>>>>>> # WARNING: Changing your CHOST is not something that should be done >>>>>>>> lightly. >>>>>>>> # Please consult http://www.gentoo.org/doc/en/change-chost.xml >>>>>>>> before changing. >>>>>>>> CHOST="x86_64-pc-linux-gnu" >>>>>>>> # These are the USE flags that were used in addition to what is >>>>>>>> provided by the >>>>>>>> # profile used for building. >>>>>>>> USE="bindist mmx multiuser openrc sse sse2 symlink -systemd" >>>>>>>> PORTDIR="/usr/portage" >>>>>>>> DISTDIR="${PORTDIR}/distfiles" >>>>>>>> PKGDIR="${PORTDIR}/packages" >>>>>>>> MAKEOPTS="-j1" >>>>>>>> LINGUAS="es" >>>>>>>> ACCEPT_LICENSE="*" >>>>>>>> VIDEO_CARDS="intel" >>>>>>>> ALSA_CARDS="intel" >>>>>>>> INPUT_DEVICES="keyboard mouse evdev synaptics" >>>>>>>> >>>>>>>> >>>>>>>> GENTOO_MIRRORS="rsync://gentoo.c3sl.ufpr.br/gentoo/ >>>>>>>> http://gentoo.c3sl.ufpr.br/ ftp://gentoo.c3sl.ufpr.br/gentoo/ >>>>>>>> http://www.las.ic.unicamp.br/pub/gentoo/ >>>>>>>> ftp://ftp.las.ic.unicamp.br/pub/gentoo/" >>>>>>>> >>>>>>>> SYNC="rsync://rsync1.br.gentoo.org/gentoo-portage" >>>>>>>> >>>>>>>> >>>>>>>> Si necesitan algo mas de informacion por favor me avisan. >>>>>>>> >>>>>>>> >>>>>>>> Saludos >>>>>>>> >>>>>>>> 2014-12-19 11:19 GMT-04:30 KyD <kyd.is.back@gmail.com>: >>>>>>>> >>>>>>>> cat make.conf >>>>>>>>> >>>>>>>>> 2014-12-19 12:32 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: >>>>>>>>> >>>>>>>>>> Santiago gracias por tus comentarios. >>>>>>>>>> >>>>>>>>>> Igual con el mismo problema. >>>>>>>>>> >>>>>>>>>> http://pastebin.com/AquYw1GA >>>>>>>>>> >>>>>>>>>> Alguna idea mas. >>>>>>>>>> >>>>>>>>>> Saludos >>>>>>>>>> >>>>>>>>>> 2014-12-19 9:25 GMT-04:30 Santiago López Denazis < >>>>>>>>>> sldenazis@linux.com>: >>>>>>>>>> >>>>>>>>>> On 12/18/2014 11:45 PM, Freddy Taborda wrote: >>>>>>>>>>> > Hola, hace mucho que no usaba Linux y mucho menos Gentoo, ya >>>>>>>>>>> que no tenia >>>>>>>>>>> > equipo, ahora estoy haciendo una nueva instalacion >>>>>>>>>>> > >>>>>>>>>>> http://terracenter.blogspot.com/2014/12/instalacion-de-gentoo-en-una-laptop.html >>>>>>>>>>> > (le falta mucho a este tuto para dejarlo decente), pero al >>>>>>>>>>> momento de >>>>>>>>>>> > instalar lvm2 la compilacion me da estos errores >>>>>>>>>>> > >>>>>>>>>>> >>>>>>>>>>> Buenos días Freddy, si no es un problema para lo que necesitás, >>>>>>>>>>> intenta compilarlo con -python: >>>>>>>>>>> >>>>>>>>>>> echo dev-util/boost-build -python >> >>>>>>>>>>> /etc/portage/package.use >>>>>>>>>>> >>>>>>>>>>> Saludos, >>>>>>>>>>> >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> > # emerge -pv lvm2 >>>>>>>>>>> > >>>>>>>>>>> > * IMPORTANT: 5 config files in '/etc/portage' need updating. >>>>>>>>>>> > * See the CONFIGURATION FILES section of the emerge >>>>>>>>>>> > * man page to learn how to update config files. >>>>>>>>>>> > >>>>>>>>>>> > These are the packages that would be merged, in order: >>>>>>>>>>> > >>>>>>>>>>> > Calculating dependencies... done! >>>>>>>>>>> > [ebuild N ] dev-util/boost-build-1.55.0 USE="python -examples >>>>>>>>>>> {-test}" 0 >>>>>>>>>>> > KiB >>>>>>>>>>> > [ebuild N ] virtual/libudev-215-r1:0/1 USE="systemd >>>>>>>>>>> -static-libs" >>>>>>>>>>> > ABI_X86="(64) (-32) (-x32)" 0 KiB >>>>>>>>>>> > [ebuild N ] dev-libs/boost-1.55.0-r2:0/1.55.0 USE="nls python >>>>>>>>>>> threads >>>>>>>>>>> > -context -debug -doc -icu -mpi -static-libs -tools" >>>>>>>>>>> > ABI_X86="(64) (-32) (-x32)" PYTHON_TARGETS="python2_7 >>>>>>>>>>> python3_3 -python3_4" >>>>>>>>>>> > 0 KiB >>>>>>>>>>> > [ebuild N ] sys-block/thin-provisioning-tools-0.3.2-r1 >>>>>>>>>>> USE="{-test}" 0 KiB >>>>>>>>>>> > [ebuild N ] sys-fs/lvm2-2.02.109 USE="readline systemd thin >>>>>>>>>>> udev (-clvm) >>>>>>>>>>> > (-cman) -device-mapper-only -lvm1 -lvm2create_ini >>>>>>>>>>> > trd (-selinux) -static -static-libs" 0 KiB >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> > * ERROR: dev-util/boost-build-1.55.0::gentoo failed (compile >>>>>>>>>>> phase): >>>>>>>>>>> > * building bjam failed >>>>>>>>>>> > * >>>>>>>>>>> > * Call stack: >>>>>>>>>>> > * ebuild.sh, line 93: Called src_compile >>>>>>>>>>> > * environment, line 4955: Called die >>>>>>>>>>> > * The specific snippet of code: >>>>>>>>>>> > * CC=$(tc-getCC) ./build.sh ${toolset} -d+2 $(use_with python >>>>>>>>>>> python >>>>>>>>>>> > "${EROOT}"/usr) || die "building bjam failed" >>>>>>>>>>> > * >>>>>>>>>>> > * If you need support, post the output of `emerge --info >>>>>>>>>>> > '=dev-util/boost-build-1.55.0::gentoo'`, >>>>>>>>>>> > * the complete build log and the output of `emerge -pqv >>>>>>>>>>> > '=dev-util/boost-build-1.55.0::gentoo'`. >>>>>>>>>>> > * The complete build log is located at >>>>>>>>>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log'. >>>>>>>>>>> > * The ebuild environment file is located at >>>>>>>>>>> > >>>>>>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/environment'. >>>>>>>>>>> > * Working directory: >>>>>>>>>>> > >>>>>>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2/engine' >>>>>>>>>>> > * S: >>>>>>>>>>> > >>>>>>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2' >>>>>>>>>>> > >>>>>>>>>>> >>>> Failed to emerge dev-util/boost-build-1.55.0, Log file: >>>>>>>>>>> > >>>>>>>>>>> >>>> >>>>>>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log' >>>>>>>>>>> > >>>>>>>>>>> > * Messages for package dev-util/boost-build-1.55.0: >>>>>>>>>>> > >>>>>>>>>>> > * ERROR: dev-util/boost-build-1.55.0::gentoo failed (compile >>>>>>>>>>> phase): >>>>>>>>>>> > * building bjam failed >>>>>>>>>>> > * >>>>>>>>>>> > * Call stack: >>>>>>>>>>> > * ebuild.sh, line 93: Called src_compile >>>>>>>>>>> > * environment, line 4955: Called die >>>>>>>>>>> > * The specific snippet of code: >>>>>>>>>>> > * CC=$(tc-getCC) ./build.sh ${toolset} -d+2 $(use_with python >>>>>>>>>>> python >>>>>>>>>>> > "${EROOT}"/usr) || die "building bjam failed" >>>>>>>>>>> > * >>>>>>>>>>> > * If you need support, post the output of `emerge --info >>>>>>>>>>> > '=dev-util/boost-build-1.55.0::gentoo'`, >>>>>>>>>>> > * the complete build log and the output of `emerge -pqv >>>>>>>>>>> > '=dev-util/boost-build-1.55.0::gentoo'`. >>>>>>>>>>> > * The complete build log is located at >>>>>>>>>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log'. >>>>>>>>>>> > * The ebuild environment file is located at >>>>>>>>>>> > >>>>>>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/environment'. >>>>>>>>>>> > * Working directory: >>>>>>>>>>> > >>>>>>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2/engine' >>>>>>>>>>> > * S: >>>>>>>>>>> > >>>>>>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2' >>>>>>>>>>> > livecd / # >>>>>>>>>>> > >>>>>>>>>>> > # emerge --info '=dev-libs/boost-1.55.0::gentoo' >>>>>>>>>>> > Portage 2.2.14 (python 2.7.7-final-0, >>>>>>>>>>> default/linux/amd64/13.0, gcc-4.8.3, >>>>>>>>>>> > glibc-2.19-r1, 3.16.5-gentoo x86_64) >>>>>>>>>>> > >>>>>>>>>>> ================================================================= >>>>>>>>>>> > System Settings >>>>>>>>>>> > >>>>>>>>>>> ================================================================= >>>>>>>>>>> > System uname: >>>>>>>>>>> Linux-3.16.5-gentoo-x86_64-Intel-R-_Pentium-R-_CPU_2020M_@ >>>>>>>>>>> > _2.40GHz-with-gentoo-2.2 >>>>>>>>>>> > KiB Mem: 3927272 total, 81700 free >>>>>>>>>>> > KiB Swap: 2097148 total, 2096904 free >>>>>>>>>>> > Timestamp of tree: Thu, 18 Dec 2014 17:15:01 +0000 >>>>>>>>>>> > ld GNU ld (Gentoo 2.24 p1.4) 2.24 >>>>>>>>>>> > app-shells/bash: 4.2_p53 >>>>>>>>>>> > dev-lang/perl: 5.18.2-r2 >>>>>>>>>>> > dev-lang/python: 2.7.7, 3.3.5-r1 >>>>>>>>>>> > dev-util/pkgconfig: 0.28-r1 >>>>>>>>>>> > sys-apps/baselayout: 2.2 >>>>>>>>>>> > sys-apps/openrc: 0.12.4 >>>>>>>>>>> > sys-apps/sandbox: 2.6-r1 >>>>>>>>>>> > sys-devel/autoconf: 2.69 >>>>>>>>>>> > sys-devel/automake: 1.13.4 >>>>>>>>>>> > sys-devel/binutils: 2.24-r3 >>>>>>>>>>> > sys-devel/gcc: 4.8.3 >>>>>>>>>>> > sys-devel/gcc-config: 1.7.3 >>>>>>>>>>> > sys-devel/libtool: 2.4.2-r1 >>>>>>>>>>> > sys-devel/make: 4.0-r1 >>>>>>>>>>> > sys-kernel/linux-headers: 3.16 (virtual/os-headers) >>>>>>>>>>> > Repositories: gentoo >>>>>>>>>>> > ACCEPT_LICENSE="*" >>>>>>>>>>> > CBUILD="x86_64-pc-linux-gnu" >>>>>>>>>>> > CFLAGS="-march=core-avx-i -O2 -pipe" >>>>>>>>>>> > CHOST="x86_64-pc-linux-gnu" >>>>>>>>>>> > CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt" >>>>>>>>>>> > CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d >>>>>>>>>>> /etc/gconf >>>>>>>>>>> > /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc >>>>>>>>>>> > /terminfo" >>>>>>>>>>> > CXXFLAGS="-march=core-avx-i -O2 -pipe" >>>>>>>>>>> > DISTDIR="/usr/portage/distfiles" >>>>>>>>>>> > FCFLAGS="-O2 -pipe" >>>>>>>>>>> > FEATURES="assume-digests binpkg-logs >>>>>>>>>>> config-protect-if-modified distlocks >>>>>>>>>>> > ebuild-locks fixlafiles merge-sync news parallel-fetch >>>>>>>>>>> > preserve-libs protect-owned sandbox sfperms strict >>>>>>>>>>> unknown-features-warn >>>>>>>>>>> > unmerge-logs unmerge-orphans userfetch userpriv usersa >>>>>>>>>>> > ndbox usersync" >>>>>>>>>>> > FFLAGS="-O2 -pipe" >>>>>>>>>>> > GENTOO_MIRRORS="rsync://gentoo.c3sl.ufpr.br/gentoo/ >>>>>>>>>>> > http://gentoo.c3sl.ufpr.br/ ftp://gentoo.c3sl.ufpr.br/gentoo/ >>>>>>>>>>> http://www.las >>>>>>>>>>> > >>>>>>>>>>> > .ic.unicamp.br/pub/gentoo/ >>>>>>>>>>> ftp://ftp.las.ic.unicamp.br/pub/gentoo/" >>>>>>>>>>> > LANG="es_VE.utf8" >>>>>>>>>>> > LDFLAGS="-Wl,-O1 -Wl,--as-needed" >>>>>>>>>>> > MAKEOPTS="-j1" >>>>>>>>>>> > PKGDIR="/usr/portage/packages" >>>>>>>>>>> > PORTAGE_CONFIGROOT="/" >>>>>>>>>>> > PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms >>>>>>>>>>> --times >>>>>>>>>>> > --omit-dir-times --compress --force --whole-file --delete - >>>>>>>>>>> > -stats --human-readable --timeout=180 --exclude=/distfiles >>>>>>>>>>> --exclude=/local >>>>>>>>>>> > --exclude=/packages" >>>>>>>>>>> > PORTAGE_TMPDIR="/var/tmp" >>>>>>>>>>> > PORTDIR="/usr/portage" >>>>>>>>>>> > PORTDIR_OVERLAY="" >>>>>>>>>>> > SYNC="rsync://rsync1.br.gentoo.org/gentoo-portage" >>>>>>>>>>> > USE="acl amd64 berkdb bindist bzip2 cli cracklib crypt cxx dri >>>>>>>>>>> fortran gdbm >>>>>>>>>>> > iconv ipv6 mmx modules multilib multiuser ncurses nl >>>>>>>>>>> > s nptl openmp pam pcre python readline session sse sse2 ssl >>>>>>>>>>> systemd tcpd >>>>>>>>>>> > unicode zlib" ABI_X86="64" ALSA_CARDS="intel" APACHE2_M >>>>>>>>>>> > ODULES="authn_core authz_core socache_shmcb unixd actions >>>>>>>>>>> alias auth_basic >>>>>>>>>>> > authn_alias authn_anon authn_dbm authn_default authn_ >>>>>>>>>>> > file authz_dbm authz_default authz_groupfile authz_host >>>>>>>>>>> authz_owner >>>>>>>>>>> > authz_user autoindex cache cgi cgid dav dav_fs dav_lock defl >>>>>>>>>>> > ate dir disk_cache env expires ext_filter file_cache filter >>>>>>>>>>> headers include >>>>>>>>>>> > info log_config logio mem_cache mime mime_magic nego >>>>>>>>>>> > tiation rewrite setenvif speling status unique_id userdir >>>>>>>>>>> usertrack >>>>>>>>>>> > vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets >>>>>>>>>>> > stage tables krita karbon braindump author" CAMERAS="ptp2" >>>>>>>>>>> > COLLECTD_PLUGINS="df interface irq load memory rrdtool swap >>>>>>>>>>> syslog" E >>>>>>>>>>> > LIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore >>>>>>>>>>> fv18 garmin >>>>>>>>>>> > garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oce >>>>>>>>>>> > anserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 >>>>>>>>>>> timing tsip >>>>>>>>>>> > tripmate tnt ublox ubx" INPUT_DEVICES="keyboard mouse e >>>>>>>>>>> > vdev synaptics" KERNEL="linux" LCD_DEVICES="bayrad cfontz >>>>>>>>>>> cfontz633 glk >>>>>>>>>>> > hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_E >>>>>>>>>>> > XTENSIONS="presenter-console presenter-minimizer" LINGUAS="es" >>>>>>>>>>> > OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-5" >>>>>>>>>>> PYTHON_S >>>>>>>>>>> > INGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_3" >>>>>>>>>>> > RUBY_TARGETS="ruby19 ruby20" USERLAND="GNU" >>>>>>>>>>> VIDEO_CARDS="intel" XT >>>>>>>>>>> > ABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options >>>>>>>>>>> ipset ipp2p iface >>>>>>>>>>> > geoip fuzzy condition tee tarpit sysrq steal rawnat >>>>>>>>>>> > logmark ipmark dhcpmac delude chaos account" >>>>>>>>>>> > Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, >>>>>>>>>>> LC_ALL, >>>>>>>>>>> > PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRES >>>>>>>>>>> > S_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> > Muchas gracias por la ayuda que me puedan dar, ya que no he >>>>>>>>>>> encontrado >>>>>>>>>>> > referencia a esa version, trate de montar la r1, pero tambien >>>>>>>>>>> me sale >>>>>>>>>>> > error. >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> Santiago López Denazis >>>>>>>>>>> GNU/Linux SysAdmin >>>>>>>>>>> sldenazis@linux.com >>>>>>>>>>> Free your source, free your mind. >>>>>>>>>>> ---- >>>>>>>>>>> Por favor, no utilice formatos de archivo privativos para el >>>>>>>>>>> intercambio >>>>>>>>>>> de documentos, como DOC y XLS, sino HTML, PDF, TXT, CSV o >>>>>>>>>>> cualquier otro >>>>>>>>>>> que no obligue a utilizar un programa de un fabricante concreto. >>>>>>>>>>> Vea >>>>>>>>>>> http://www.gnu.org/philosophy/no-word-attachments.es.html >>>>>>>>>>> -- >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> >>>>>>>>>> Freddy Taborda >>>>>>>>>> Consultor Técnico >>>>>>>>>> Valencia - Venezuela >>>>>>>>>> GNU/Linux user #283478 >>>>>>>>>> ECE #208825114 >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> What gets us into trouble is not what we don't know. It's what we >>>>>>>>>> know for sure that just ain't so. >>>>>>>>>> >>>>>>>>>> Mark Twain >>>>>>>>>> >>>>>>>>>> "Those that can, do. Those that can’t, complain." >>>>>>>>>> Linus Torvalds >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> >>>>>>>> Freddy Taborda >>>>>>>> Consultor Técnico >>>>>>>> Valencia - Venezuela >>>>>>>> GNU/Linux user #283478 >>>>>>>> ECE #208825114 >>>>>>>> >>>>>>>> >>>>>>>> What gets us into trouble is not what we don't know. It's what we >>>>>>>> know for sure that just ain't so. >>>>>>>> >>>>>>>> Mark Twain >>>>>>>> >>>>>>>> "Those that can, do. Those that can’t, complain." >>>>>>>> Linus Torvalds >>>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> >>>>>> Freddy Taborda >>>>>> Consultor Técnico >>>>>> Valencia - Venezuela >>>>>> GNU/Linux user #283478 >>>>>> ECE #208825114 >>>>>> >>>>>> >>>>>> What gets us into trouble is not what we don't know. It's what we >>>>>> know for sure that just ain't so. >>>>>> >>>>>> Mark Twain >>>>>> >>>>>> "Those that can, do. Those that can’t, complain." >>>>>> Linus Torvalds >>>>>> >>>>> >>>> >>>> >>>> -- >>>> >>>> Freddy Taborda >>>> Consultor Técnico >>>> Valencia - Venezuela >>>> GNU/Linux user #283478 >>>> ECE #208825114 >>>> >>>> >>>> What gets us into trouble is not what we don't know. It's what we know >>>> for sure that just ain't so. >>>> >>>> Mark Twain >>>> >>>> "Those that can, do. Those that can’t, complain." >>>> Linus Torvalds >>>> >>> >> >> >> -- >> >> Freddy Taborda >> Consultor Técnico >> Valencia - Venezuela >> GNU/Linux user #283478 >> ECE #208825114 >> >> >> What gets us into trouble is not what we don't know. It's what we know >> for sure that just ain't so. >> >> Mark Twain >> >> "Those that can, do. Those that can’t, complain." >> Linus Torvalds >> > -- Freddy Taborda Consultor Técnico Valencia - Venezuela GNU/Linux user #283478 ECE #208825114 What gets us into trouble is not what we don't know. It's what we know for sure that just ain't so. Mark Twain "Those that can, do. Those that can’t, complain." Linus Torvalds [-- Attachment #2: Type: text/html, Size: 28232 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [gentoo-user-es] ERROR: dev-util/boost-build-1.55.0::gentoo failed 2014-12-19 19:55 ` Freddy Taborda @ 2014-12-19 20:00 ` KyD 0 siblings, 0 replies; 14+ messages in thread From: KyD @ 2014-12-19 20:00 UTC (permalink / raw To: gentoo-user-es [-- Attachment #1: Type: text/plain, Size: 23056 bytes --] No hay drama. Cuando quieras. Cualquier cosa , si usas irc. Nos vas a encontrar a mi y a los chicos en : #gentoo-es Saludos 2014-12-19 16:55 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: > > Gracias por la ayuda y la informacion. > > Saludos > > 2014-12-19 14:47 GMT-04:30 KyD <kyd.is.back@gmail.com>: > > a través del ( model name ) >> >> Y deberías ir de a poco re-compilando las apps. >> >> 2014-12-19 16:05 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: >> >>> Muchas gracias, pero perdona como se yo que parte la info del "microprocesador" >>> me indica lo de los CFLAGS? >>> >>> Ya cambie los CFLAGS del make.conf, deberia recompilar todo de nuevo >>> con la nueva configuracion? >>> >>> Muchas gracias. >>> >>> 2014-12-19 14:01 GMT-04:30 KyD <kyd.is.back@gmail.com>: >>> >>> A través de tu make.conf y de tu tipo de microprocesador. >>>> >>>> Creo que rendirá mejor si modificas tu CFLAGS de tu make.conf con la >>>> que te eh pasado. >>>> >>>> 2014-12-19 15:17 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: >>>> >>>>> Esrtimado KyD >>>>> >>>>> Funciono sin problemas, ahora se esta compilando el LVM2, pero tengo >>>>> una duda yo tome el la configuracon iki.gentoo.org/wiki/Safe_CFLAGS >>>>> Core i3/i5/i7 & Xeon E3/E5/E7 *V1 y hasta el momento todos los >>>>> paquetes estaban compilando sin problema, y tu me estas pasando la >>>>> configuracion >>>>> Pentium y el paquete dev-util/boost-build-1.55.0::gentoo compilo sin >>>>> problema y al momento de estar eascribiendo esto se esta >>>>> compilando el resto de los que se necesita para LMV2, a manera de >>>>> aprendisaje como llegaste a esa conclucion, que parte de la informacion que >>>>> postee te sirvio? >>>>> >>>>> Saludos y muchas gracias por la ayuda e informacion >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> 2014-12-19 12:33 GMT-04:30 KyD <kyd.is.back@gmail.com>: >>>>> >>>>> Prueba lo siguiente : >>>>>> >>>>>> 1 ) export CFLAGS="-march=core-avx-i -mno-avx -mno-aes -mno-rdrnd -O2 >>>>>> -pipe" >>>>>> >>>>>> 2 ) emerge --info | grep -i cflags (Esto es a modo de chequeo para >>>>>> ver que se seteo bien CFLAGS) >>>>>> >>>>>> Si quedo bien seteada : >>>>>> >>>>>> 3) emerge -v dev-util/boost-build >>>>>> >>>>>> 2014-12-19 13:53 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: >>>>>> >>>>>>> cat /proc/cpuinfo >>>>>>> processor : 0 >>>>>>> vendor_id : GenuineIntel >>>>>>> cpu family : 6 >>>>>>> model : 58 >>>>>>> model name : Intel(R) Pentium(R) CPU 2020M @ 2.40GHz >>>>>>> stepping : 9 >>>>>>> microcode : 0x19 >>>>>>> cpu MHz : 2400.000 >>>>>>> cache size : 2048 KB >>>>>>> physical id : 0 >>>>>>> siblings : 2 >>>>>>> core id : 0 >>>>>>> cpu cores : 2 >>>>>>> apicid : 0 >>>>>>> initial apicid : 0 >>>>>>> fpu : yes >>>>>>> fpu_exception : yes >>>>>>> cpuid level : 13 >>>>>>> wp : yes >>>>>>> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr >>>>>>> pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe >>>>>>> syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl >>>>>>> xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor >>>>>>> ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt >>>>>>> tsc_deadline_timer xsave lahf_lm arat epb xsaveopt pln pts dtherm >>>>>>> tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms >>>>>>> bogomips : 4789.09 >>>>>>> clflush size : 64 >>>>>>> cache_alignment : 64 >>>>>>> address sizes : 36 bits physical, 48 bits virtual >>>>>>> power management: >>>>>>> >>>>>>> processor : 1 >>>>>>> vendor_id : GenuineIntel >>>>>>> cpu family : 6 >>>>>>> model : 58 >>>>>>> model name : Intel(R) Pentium(R) CPU 2020M @ 2.40GHz >>>>>>> stepping : 9 >>>>>>> microcode : 0x19 >>>>>>> cpu MHz : 2400.000 >>>>>>> cache size : 2048 KB >>>>>>> physical id : 0 >>>>>>> siblings : 2 >>>>>>> core id : 1 >>>>>>> cpu cores : 2 >>>>>>> apicid : 2 >>>>>>> initial apicid : 2 >>>>>>> fpu : yes >>>>>>> fpu_exception : yes >>>>>>> cpuid level : 13 >>>>>>> wp : yes >>>>>>> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr >>>>>>> pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe >>>>>>> syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl >>>>>>> xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor >>>>>>> ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt >>>>>>> tsc_deadline_timer xsave lahf_lm arat epb xsaveopt pln pts dtherm >>>>>>> tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms >>>>>>> bogomips : 4789.09 >>>>>>> clflush size : 64 >>>>>>> cache_alignment : 64 >>>>>>> address sizes : 36 bits physical, 48 bits virtual >>>>>>> power management: >>>>>>> >>>>>>> >>>>>>> Saludos >>>>>>> >>>>>>> 2014-12-19 12:13 GMT-04:30 KyD <kyd.is.back@gmail.com>: >>>>>>> >>>>>>> Ok , >>>>>>>> >>>>>>>> ¿ que procesador tienes ? >>>>>>>> >>>>>>>> 2014-12-19 13:12 GMT-03:00 Freddy Taborda <terracenter@gmail.com>: >>>>>>>> >>>>>>>>> >>>>>>>>> Gracias KyD >>>>>>>>> >>>>>>>>> # cat /etc/portage/make.conf >>>>>>>>> # These settings were set by the catalyst build script that >>>>>>>>> automatically >>>>>>>>> # built this stage. >>>>>>>>> # Please consult /usr/share/portage/config/make.conf.example for a >>>>>>>>> more >>>>>>>>> # detailed example. >>>>>>>>> CFLAGS="-march=core-avx-i -O2 -pipe" >>>>>>>>> #CFLAGS="-O2 -pipe" >>>>>>>>> CXXFLAGS="${CFLAGS}" >>>>>>>>> # WARNING: Changing your CHOST is not something that should be >>>>>>>>> done lightly. >>>>>>>>> # Please consult http://www.gentoo.org/doc/en/change-chost.xml >>>>>>>>> before changing. >>>>>>>>> CHOST="x86_64-pc-linux-gnu" >>>>>>>>> # These are the USE flags that were used in addition to what is >>>>>>>>> provided by the >>>>>>>>> # profile used for building. >>>>>>>>> USE="bindist mmx multiuser openrc sse sse2 symlink -systemd" >>>>>>>>> PORTDIR="/usr/portage" >>>>>>>>> DISTDIR="${PORTDIR}/distfiles" >>>>>>>>> PKGDIR="${PORTDIR}/packages" >>>>>>>>> MAKEOPTS="-j1" >>>>>>>>> LINGUAS="es" >>>>>>>>> ACCEPT_LICENSE="*" >>>>>>>>> VIDEO_CARDS="intel" >>>>>>>>> ALSA_CARDS="intel" >>>>>>>>> INPUT_DEVICES="keyboard mouse evdev synaptics" >>>>>>>>> >>>>>>>>> >>>>>>>>> GENTOO_MIRRORS="rsync://gentoo.c3sl.ufpr.br/gentoo/ >>>>>>>>> http://gentoo.c3sl.ufpr.br/ ftp://gentoo.c3sl.ufpr.br/gentoo/ >>>>>>>>> http://www.las.ic.unicamp.br/pub/gentoo/ >>>>>>>>> ftp://ftp.las.ic.unicamp.br/pub/gentoo/" >>>>>>>>> >>>>>>>>> SYNC="rsync://rsync1.br.gentoo.org/gentoo-portage" >>>>>>>>> >>>>>>>>> >>>>>>>>> Si necesitan algo mas de informacion por favor me avisan. >>>>>>>>> >>>>>>>>> >>>>>>>>> Saludos >>>>>>>>> >>>>>>>>> 2014-12-19 11:19 GMT-04:30 KyD <kyd.is.back@gmail.com>: >>>>>>>>> >>>>>>>>> cat make.conf >>>>>>>>>> >>>>>>>>>> 2014-12-19 12:32 GMT-03:00 Freddy Taborda <terracenter@gmail.com> >>>>>>>>>> : >>>>>>>>>> >>>>>>>>>>> Santiago gracias por tus comentarios. >>>>>>>>>>> >>>>>>>>>>> Igual con el mismo problema. >>>>>>>>>>> >>>>>>>>>>> http://pastebin.com/AquYw1GA >>>>>>>>>>> >>>>>>>>>>> Alguna idea mas. >>>>>>>>>>> >>>>>>>>>>> Saludos >>>>>>>>>>> >>>>>>>>>>> 2014-12-19 9:25 GMT-04:30 Santiago López Denazis < >>>>>>>>>>> sldenazis@linux.com>: >>>>>>>>>>> >>>>>>>>>>> On 12/18/2014 11:45 PM, Freddy Taborda wrote: >>>>>>>>>>>> > Hola, hace mucho que no usaba Linux y mucho menos Gentoo, ya >>>>>>>>>>>> que no tenia >>>>>>>>>>>> > equipo, ahora estoy haciendo una nueva instalacion >>>>>>>>>>>> > >>>>>>>>>>>> http://terracenter.blogspot.com/2014/12/instalacion-de-gentoo-en-una-laptop.html >>>>>>>>>>>> > (le falta mucho a este tuto para dejarlo decente), pero al >>>>>>>>>>>> momento de >>>>>>>>>>>> > instalar lvm2 la compilacion me da estos errores >>>>>>>>>>>> > >>>>>>>>>>>> >>>>>>>>>>>> Buenos días Freddy, si no es un problema para lo que >>>>>>>>>>>> necesitás, >>>>>>>>>>>> intenta compilarlo con -python: >>>>>>>>>>>> >>>>>>>>>>>> echo dev-util/boost-build -python >> >>>>>>>>>>>> /etc/portage/package.use >>>>>>>>>>>> >>>>>>>>>>>> Saludos, >>>>>>>>>>>> >>>>>>>>>>>> > >>>>>>>>>>>> > >>>>>>>>>>>> > # emerge -pv lvm2 >>>>>>>>>>>> > >>>>>>>>>>>> > * IMPORTANT: 5 config files in '/etc/portage' need updating. >>>>>>>>>>>> > * See the CONFIGURATION FILES section of the emerge >>>>>>>>>>>> > * man page to learn how to update config files. >>>>>>>>>>>> > >>>>>>>>>>>> > These are the packages that would be merged, in order: >>>>>>>>>>>> > >>>>>>>>>>>> > Calculating dependencies... done! >>>>>>>>>>>> > [ebuild N ] dev-util/boost-build-1.55.0 USE="python -examples >>>>>>>>>>>> {-test}" 0 >>>>>>>>>>>> > KiB >>>>>>>>>>>> > [ebuild N ] virtual/libudev-215-r1:0/1 USE="systemd >>>>>>>>>>>> -static-libs" >>>>>>>>>>>> > ABI_X86="(64) (-32) (-x32)" 0 KiB >>>>>>>>>>>> > [ebuild N ] dev-libs/boost-1.55.0-r2:0/1.55.0 USE="nls python >>>>>>>>>>>> threads >>>>>>>>>>>> > -context -debug -doc -icu -mpi -static-libs -tools" >>>>>>>>>>>> > ABI_X86="(64) (-32) (-x32)" PYTHON_TARGETS="python2_7 >>>>>>>>>>>> python3_3 -python3_4" >>>>>>>>>>>> > 0 KiB >>>>>>>>>>>> > [ebuild N ] sys-block/thin-provisioning-tools-0.3.2-r1 >>>>>>>>>>>> USE="{-test}" 0 KiB >>>>>>>>>>>> > [ebuild N ] sys-fs/lvm2-2.02.109 USE="readline systemd thin >>>>>>>>>>>> udev (-clvm) >>>>>>>>>>>> > (-cman) -device-mapper-only -lvm1 -lvm2create_ini >>>>>>>>>>>> > trd (-selinux) -static -static-libs" 0 KiB >>>>>>>>>>>> > >>>>>>>>>>>> > >>>>>>>>>>>> > >>>>>>>>>>>> > * ERROR: dev-util/boost-build-1.55.0::gentoo failed (compile >>>>>>>>>>>> phase): >>>>>>>>>>>> > * building bjam failed >>>>>>>>>>>> > * >>>>>>>>>>>> > * Call stack: >>>>>>>>>>>> > * ebuild.sh, line 93: Called src_compile >>>>>>>>>>>> > * environment, line 4955: Called die >>>>>>>>>>>> > * The specific snippet of code: >>>>>>>>>>>> > * CC=$(tc-getCC) ./build.sh ${toolset} -d+2 $(use_with python >>>>>>>>>>>> python >>>>>>>>>>>> > "${EROOT}"/usr) || die "building bjam failed" >>>>>>>>>>>> > * >>>>>>>>>>>> > * If you need support, post the output of `emerge --info >>>>>>>>>>>> > '=dev-util/boost-build-1.55.0::gentoo'`, >>>>>>>>>>>> > * the complete build log and the output of `emerge -pqv >>>>>>>>>>>> > '=dev-util/boost-build-1.55.0::gentoo'`. >>>>>>>>>>>> > * The complete build log is located at >>>>>>>>>>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log'. >>>>>>>>>>>> > * The ebuild environment file is located at >>>>>>>>>>>> > >>>>>>>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/environment'. >>>>>>>>>>>> > * Working directory: >>>>>>>>>>>> > >>>>>>>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2/engine' >>>>>>>>>>>> > * S: >>>>>>>>>>>> > >>>>>>>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2' >>>>>>>>>>>> > >>>>>>>>>>>> >>>> Failed to emerge dev-util/boost-build-1.55.0, Log file: >>>>>>>>>>>> > >>>>>>>>>>>> >>>> >>>>>>>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log' >>>>>>>>>>>> > >>>>>>>>>>>> > * Messages for package dev-util/boost-build-1.55.0: >>>>>>>>>>>> > >>>>>>>>>>>> > * ERROR: dev-util/boost-build-1.55.0::gentoo failed (compile >>>>>>>>>>>> phase): >>>>>>>>>>>> > * building bjam failed >>>>>>>>>>>> > * >>>>>>>>>>>> > * Call stack: >>>>>>>>>>>> > * ebuild.sh, line 93: Called src_compile >>>>>>>>>>>> > * environment, line 4955: Called die >>>>>>>>>>>> > * The specific snippet of code: >>>>>>>>>>>> > * CC=$(tc-getCC) ./build.sh ${toolset} -d+2 $(use_with python >>>>>>>>>>>> python >>>>>>>>>>>> > "${EROOT}"/usr) || die "building bjam failed" >>>>>>>>>>>> > * >>>>>>>>>>>> > * If you need support, post the output of `emerge --info >>>>>>>>>>>> > '=dev-util/boost-build-1.55.0::gentoo'`, >>>>>>>>>>>> > * the complete build log and the output of `emerge -pqv >>>>>>>>>>>> > '=dev-util/boost-build-1.55.0::gentoo'`. >>>>>>>>>>>> > * The complete build log is located at >>>>>>>>>>>> > '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/build.log'. >>>>>>>>>>>> > * The ebuild environment file is located at >>>>>>>>>>>> > >>>>>>>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/temp/environment'. >>>>>>>>>>>> > * Working directory: >>>>>>>>>>>> > >>>>>>>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2/engine' >>>>>>>>>>>> > * S: >>>>>>>>>>>> > >>>>>>>>>>>> '/var/tmp/portage/dev-util/boost-build-1.55.0/work/boost_1_55_0/tools/build/v2' >>>>>>>>>>>> > livecd / # >>>>>>>>>>>> > >>>>>>>>>>>> > # emerge --info '=dev-libs/boost-1.55.0::gentoo' >>>>>>>>>>>> > Portage 2.2.14 (python 2.7.7-final-0, >>>>>>>>>>>> default/linux/amd64/13.0, gcc-4.8.3, >>>>>>>>>>>> > glibc-2.19-r1, 3.16.5-gentoo x86_64) >>>>>>>>>>>> > >>>>>>>>>>>> ================================================================= >>>>>>>>>>>> > System Settings >>>>>>>>>>>> > >>>>>>>>>>>> ================================================================= >>>>>>>>>>>> > System uname: >>>>>>>>>>>> Linux-3.16.5-gentoo-x86_64-Intel-R-_Pentium-R-_CPU_2020M_@ >>>>>>>>>>>> > _2.40GHz-with-gentoo-2.2 >>>>>>>>>>>> > KiB Mem: 3927272 total, 81700 free >>>>>>>>>>>> > KiB Swap: 2097148 total, 2096904 free >>>>>>>>>>>> > Timestamp of tree: Thu, 18 Dec 2014 17:15:01 +0000 >>>>>>>>>>>> > ld GNU ld (Gentoo 2.24 p1.4) 2.24 >>>>>>>>>>>> > app-shells/bash: 4.2_p53 >>>>>>>>>>>> > dev-lang/perl: 5.18.2-r2 >>>>>>>>>>>> > dev-lang/python: 2.7.7, 3.3.5-r1 >>>>>>>>>>>> > dev-util/pkgconfig: 0.28-r1 >>>>>>>>>>>> > sys-apps/baselayout: 2.2 >>>>>>>>>>>> > sys-apps/openrc: 0.12.4 >>>>>>>>>>>> > sys-apps/sandbox: 2.6-r1 >>>>>>>>>>>> > sys-devel/autoconf: 2.69 >>>>>>>>>>>> > sys-devel/automake: 1.13.4 >>>>>>>>>>>> > sys-devel/binutils: 2.24-r3 >>>>>>>>>>>> > sys-devel/gcc: 4.8.3 >>>>>>>>>>>> > sys-devel/gcc-config: 1.7.3 >>>>>>>>>>>> > sys-devel/libtool: 2.4.2-r1 >>>>>>>>>>>> > sys-devel/make: 4.0-r1 >>>>>>>>>>>> > sys-kernel/linux-headers: 3.16 (virtual/os-headers) >>>>>>>>>>>> > Repositories: gentoo >>>>>>>>>>>> > ACCEPT_LICENSE="*" >>>>>>>>>>>> > CBUILD="x86_64-pc-linux-gnu" >>>>>>>>>>>> > CFLAGS="-march=core-avx-i -O2 -pipe" >>>>>>>>>>>> > CHOST="x86_64-pc-linux-gnu" >>>>>>>>>>>> > CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt" >>>>>>>>>>>> > CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d >>>>>>>>>>>> /etc/gconf >>>>>>>>>>>> > /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc >>>>>>>>>>>> > /terminfo" >>>>>>>>>>>> > CXXFLAGS="-march=core-avx-i -O2 -pipe" >>>>>>>>>>>> > DISTDIR="/usr/portage/distfiles" >>>>>>>>>>>> > FCFLAGS="-O2 -pipe" >>>>>>>>>>>> > FEATURES="assume-digests binpkg-logs >>>>>>>>>>>> config-protect-if-modified distlocks >>>>>>>>>>>> > ebuild-locks fixlafiles merge-sync news parallel-fetch >>>>>>>>>>>> > preserve-libs protect-owned sandbox sfperms strict >>>>>>>>>>>> unknown-features-warn >>>>>>>>>>>> > unmerge-logs unmerge-orphans userfetch userpriv usersa >>>>>>>>>>>> > ndbox usersync" >>>>>>>>>>>> > FFLAGS="-O2 -pipe" >>>>>>>>>>>> > GENTOO_MIRRORS="rsync://gentoo.c3sl.ufpr.br/gentoo/ >>>>>>>>>>>> > http://gentoo.c3sl.ufpr.br/ ftp://gentoo.c3sl.ufpr.br/gentoo/ >>>>>>>>>>>> http://www.las >>>>>>>>>>>> > >>>>>>>>>>>> > .ic.unicamp.br/pub/gentoo/ >>>>>>>>>>>> ftp://ftp.las.ic.unicamp.br/pub/gentoo/" >>>>>>>>>>>> > LANG="es_VE.utf8" >>>>>>>>>>>> > LDFLAGS="-Wl,-O1 -Wl,--as-needed" >>>>>>>>>>>> > MAKEOPTS="-j1" >>>>>>>>>>>> > PKGDIR="/usr/portage/packages" >>>>>>>>>>>> > PORTAGE_CONFIGROOT="/" >>>>>>>>>>>> > PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms >>>>>>>>>>>> --times >>>>>>>>>>>> > --omit-dir-times --compress --force --whole-file --delete - >>>>>>>>>>>> > -stats --human-readable --timeout=180 --exclude=/distfiles >>>>>>>>>>>> --exclude=/local >>>>>>>>>>>> > --exclude=/packages" >>>>>>>>>>>> > PORTAGE_TMPDIR="/var/tmp" >>>>>>>>>>>> > PORTDIR="/usr/portage" >>>>>>>>>>>> > PORTDIR_OVERLAY="" >>>>>>>>>>>> > SYNC="rsync://rsync1.br.gentoo.org/gentoo-portage" >>>>>>>>>>>> > USE="acl amd64 berkdb bindist bzip2 cli cracklib crypt cxx >>>>>>>>>>>> dri fortran gdbm >>>>>>>>>>>> > iconv ipv6 mmx modules multilib multiuser ncurses nl >>>>>>>>>>>> > s nptl openmp pam pcre python readline session sse sse2 ssl >>>>>>>>>>>> systemd tcpd >>>>>>>>>>>> > unicode zlib" ABI_X86="64" ALSA_CARDS="intel" APACHE2_M >>>>>>>>>>>> > ODULES="authn_core authz_core socache_shmcb unixd actions >>>>>>>>>>>> alias auth_basic >>>>>>>>>>>> > authn_alias authn_anon authn_dbm authn_default authn_ >>>>>>>>>>>> > file authz_dbm authz_default authz_groupfile authz_host >>>>>>>>>>>> authz_owner >>>>>>>>>>>> > authz_user autoindex cache cgi cgid dav dav_fs dav_lock defl >>>>>>>>>>>> > ate dir disk_cache env expires ext_filter file_cache filter >>>>>>>>>>>> headers include >>>>>>>>>>>> > info log_config logio mem_cache mime mime_magic nego >>>>>>>>>>>> > tiation rewrite setenvif speling status unique_id userdir >>>>>>>>>>>> usertrack >>>>>>>>>>>> > vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets >>>>>>>>>>>> > stage tables krita karbon braindump author" CAMERAS="ptp2" >>>>>>>>>>>> > COLLECTD_PLUGINS="df interface irq load memory rrdtool swap >>>>>>>>>>>> syslog" E >>>>>>>>>>>> > LIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore >>>>>>>>>>>> fv18 garmin >>>>>>>>>>>> > garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oce >>>>>>>>>>>> > anserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 >>>>>>>>>>>> timing tsip >>>>>>>>>>>> > tripmate tnt ublox ubx" INPUT_DEVICES="keyboard mouse e >>>>>>>>>>>> > vdev synaptics" KERNEL="linux" LCD_DEVICES="bayrad cfontz >>>>>>>>>>>> cfontz633 glk >>>>>>>>>>>> > hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_E >>>>>>>>>>>> > XTENSIONS="presenter-console presenter-minimizer" LINGUAS="es" >>>>>>>>>>>> > OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-5" >>>>>>>>>>>> PYTHON_S >>>>>>>>>>>> > INGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_3" >>>>>>>>>>>> > RUBY_TARGETS="ruby19 ruby20" USERLAND="GNU" >>>>>>>>>>>> VIDEO_CARDS="intel" XT >>>>>>>>>>>> > ABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options >>>>>>>>>>>> ipset ipp2p iface >>>>>>>>>>>> > geoip fuzzy condition tee tarpit sysrq steal rawnat >>>>>>>>>>>> > logmark ipmark dhcpmac delude chaos account" >>>>>>>>>>>> > Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, >>>>>>>>>>>> LC_ALL, >>>>>>>>>>>> > PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRES >>>>>>>>>>>> > S_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON >>>>>>>>>>>> > >>>>>>>>>>>> > >>>>>>>>>>>> > >>>>>>>>>>>> > >>>>>>>>>>>> > Muchas gracias por la ayuda que me puedan dar, ya que no he >>>>>>>>>>>> encontrado >>>>>>>>>>>> > referencia a esa version, trate de montar la r1, pero tambien >>>>>>>>>>>> me sale >>>>>>>>>>>> > error. >>>>>>>>>>>> > >>>>>>>>>>>> > >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> Santiago López Denazis >>>>>>>>>>>> GNU/Linux SysAdmin >>>>>>>>>>>> sldenazis@linux.com >>>>>>>>>>>> Free your source, free your mind. >>>>>>>>>>>> ---- >>>>>>>>>>>> Por favor, no utilice formatos de archivo privativos para el >>>>>>>>>>>> intercambio >>>>>>>>>>>> de documentos, como DOC y XLS, sino HTML, PDF, TXT, CSV o >>>>>>>>>>>> cualquier otro >>>>>>>>>>>> que no obligue a utilizar un programa de un fabricante >>>>>>>>>>>> concreto. Vea >>>>>>>>>>>> http://www.gnu.org/philosophy/no-word-attachments.es.html >>>>>>>>>>>> -- >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> >>>>>>>>>>> Freddy Taborda >>>>>>>>>>> Consultor Técnico >>>>>>>>>>> Valencia - Venezuela >>>>>>>>>>> GNU/Linux user #283478 >>>>>>>>>>> ECE #208825114 >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> What gets us into trouble is not what we don't know. It's what >>>>>>>>>>> we know for sure that just ain't so. >>>>>>>>>>> >>>>>>>>>>> Mark Twain >>>>>>>>>>> >>>>>>>>>>> "Those that can, do. Those that can’t, complain." >>>>>>>>>>> Linus Torvalds >>>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> >>>>>>>>> Freddy Taborda >>>>>>>>> Consultor Técnico >>>>>>>>> Valencia - Venezuela >>>>>>>>> GNU/Linux user #283478 >>>>>>>>> ECE #208825114 >>>>>>>>> >>>>>>>>> >>>>>>>>> What gets us into trouble is not what we don't know. It's what we >>>>>>>>> know for sure that just ain't so. >>>>>>>>> >>>>>>>>> Mark Twain >>>>>>>>> >>>>>>>>> "Those that can, do. Those that can’t, complain." >>>>>>>>> Linus Torvalds >>>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> >>>>>>> Freddy Taborda >>>>>>> Consultor Técnico >>>>>>> Valencia - Venezuela >>>>>>> GNU/Linux user #283478 >>>>>>> ECE #208825114 >>>>>>> >>>>>>> >>>>>>> What gets us into trouble is not what we don't know. It's what we >>>>>>> know for sure that just ain't so. >>>>>>> >>>>>>> Mark Twain >>>>>>> >>>>>>> "Those that can, do. Those that can’t, complain." >>>>>>> Linus Torvalds >>>>>>> >>>>>> >>>>> >>>>> >>>>> -- >>>>> >>>>> Freddy Taborda >>>>> Consultor Técnico >>>>> Valencia - Venezuela >>>>> GNU/Linux user #283478 >>>>> ECE #208825114 >>>>> >>>>> >>>>> What gets us into trouble is not what we don't know. It's what we know >>>>> for sure that just ain't so. >>>>> >>>>> Mark Twain >>>>> >>>>> "Those that can, do. Those that can’t, complain." >>>>> Linus Torvalds >>>>> >>>> >>> >>> >>> -- >>> >>> Freddy Taborda >>> Consultor Técnico >>> Valencia - Venezuela >>> GNU/Linux user #283478 >>> ECE #208825114 >>> >>> >>> What gets us into trouble is not what we don't know. It's what we know >>> for sure that just ain't so. >>> >>> Mark Twain >>> >>> "Those that can, do. Those that can’t, complain." >>> Linus Torvalds >>> >> > > > -- > > Freddy Taborda > Consultor Técnico > Valencia - Venezuela > GNU/Linux user #283478 > ECE #208825114 > > > What gets us into trouble is not what we don't know. It's what we know for > sure that just ain't so. > > Mark Twain > > "Those that can, do. Those that can’t, complain." > Linus Torvalds > [-- Attachment #2: Type: text/html, Size: 28765 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2014-12-19 20:00 UTC | newest] Thread overview: 14+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-12-19 2:45 [gentoo-user-es] ERROR: dev-util/boost-build-1.55.0::gentoo failed Freddy Taborda 2014-12-19 13:55 ` Santiago López Denazis 2014-12-19 15:32 ` Freddy Taborda 2014-12-19 15:49 ` KyD 2014-12-19 16:12 ` Freddy Taborda 2014-12-19 16:43 ` KyD 2014-12-19 16:53 ` Freddy Taborda 2014-12-19 17:03 ` KyD 2014-12-19 18:17 ` Freddy Taborda 2014-12-19 18:31 ` KyD 2014-12-19 19:05 ` Freddy Taborda 2014-12-19 19:17 ` KyD 2014-12-19 19:55 ` Freddy Taborda 2014-12-19 20:00 ` KyD
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox