[gentoo-user-de] Avermedia 771 DVB-T wie gehts nun weiter ...

[gentoo-user-de] Avermedia 771 DVB-T wie gehts nun weiter ...

[Holger Doerschel]

Hallo,

habe eine Avermedia 771 DVB-T Karte eingebaut. Dazu kernel 2.6.10-rc2 von
kernel.org installiert.

Habe viele howtos gelesen und komme dennoch nicht weiter. Ich verstehe das
mit dem patchen und den dvb-t-kernel-cvs-checkout nicht so ganz.... brauch
ich die überhaupt? Ich habe zumindest bis auf den Kernel nichts weiter
installiert.

Folgendes gebe ich ein:

Code:
modprobe bttv


Und hier die Ausgabe von dmesg:

Code:
Linux video capture interface: v1.00
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
PCI: Found IRQ 11 for device 0000:00:0c.0
PCI: Sharing IRQ 11 with 0000:00:0a.0
PCI: Sharing IRQ 11 with 0000:00:0c.1
PCI: Sharing IRQ 11 with 0000:00:10.2
bttv0: Bt878 (rev 17) at 0000:00:0c.0, irq: 11, latency: 32, mmio:
0xeb002000
bttv0: detected: AVermedia DVB-T 771 [card=123], PCI subsystem ID is
1461:0771
bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00f0ff0f [init]
i2c_adapter i2c-0: registered as adapter #0
bttv0: using tuner=4
i2c-core: driver i2c TV tuner driver registered.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0060
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0061
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0062
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0063
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0064
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0065
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0066
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0067
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0068
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0069
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 006a
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 006b
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 006c
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 006d
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 006e
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 006f
i2c_adapter i2c-0: master_xfer: with 1 msgs.
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: add subdevice "remote0"
bttv0: add subdevice "dvb0"


Code:
modprobe mt352


Und hier die Ausgabe von dmesg:

Code:
i2c-core: driver dvbfe_mt352 registered.
i2c_adapter i2c-0: master_xfer: with 2 msgs.
i2c_adapter i2c-0: master_xfer: with 2 msgs.
i2c_adapter i2c-0: master_xfer: with 2 msgs.
i2c_adapter i2c-0: master_xfer: with 2 msgs.
i2c_adapter i2c-0: master_xfer: with 2 msgs.
i2c_adapter i2c-0: master_xfer: with 2 msgs.
i2c_adapter i2c-0: master_xfer: with 2 msgs.
i2c_adapter i2c-0: master_xfer: with 2 msgs.
i2c_adapter i2c-0: master_xfer: with 2 msgs.
dvbfe_mt352: Setup for AverMedia DVB-T 771
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: client [dvbfe_mt352] registered to adapter
registering 0-0000


Code:
modprobe dvb-bt8xx


Und hier die Ausgabe von dmesg:

Code:
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
PCI: Found IRQ 11 for device 0000:00:0c.1
PCI: Sharing IRQ 11 with 0000:00:0a.0
PCI: Sharing IRQ 11 with 0000:00:0c.0
PCI: Sharing IRQ 11 with 0000:00:10.2
bt878(0): Bt878 (rev 17) at 00:0c.1, irq: 11, latency: 32, memory:
0xeb003000
DVB: registering new adapter (bttv0).




Wie geht es nun weiter? Wie ich inzwischen las, kann tvtime nicht verwendet
werden.



Grüße
Holger


--
gentoo-user-de@gentoo.org mailing list