public inbox for gentoo-user-de@lists.gentoo.org
 help / color / mirror / Atom feed
* [gentoo-user-de] firmware load for b43/ucode13.fw failed
@ 2016-09-09  8:31 Gössl Gerhard
  2016-09-09  9:47 ` Martin Wohlert
  0 siblings, 1 reply; 4+ messages in thread
From: Gössl Gerhard @ 2016-09-09  8:31 UTC (permalink / raw
  To: gentoo-user-de

Hallo ,

dmesg bringt bei meinem selbstgebackenen Kernel

folgendes:



b43-phy0: Broadcom 4311 WLAN found (core revision 13)
b43-phy0: Found PHY: Analog 4, Type 2 (G), Revision 9
b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 2, Version 0
b43-phy0 warning: 5 GHz band is unsupported on this PHY
b43 ssb0:0: Direct firmware load for b43/ucode13.fw failed with error -2
b43 ssb0:0: Direct firmware load for b43/ucode13.fw failed with error -2
b43 ssb0:0: Direct firmware load for b43-open/ucode13.fw failed with
error -2
b43 ssb0:0: Direct firmware load for b43-open/ucode13.fw failed with
error -2
b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found
b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
b43-phy0 ERROR: You must go to
http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and
download the correct firmware for this driver version. Please carefully
read all instructions on this website.



Habe aber sys-kernel/linux-firmware-20160628 installiert !!

Die Treiber für den Broadcom 4311 sind als Module installiert.




GRUß

Gerhard Gössl

isny im ALL


^ permalink raw reply	[flat|nested] 4+ messages in thread
* Re: [gentoo-user-de] firmware load for b43/ucode13.fw failed
  2016-09-09  8:31 [gentoo-user-de] firmware load for b43/ucode13.fw failed Gössl Gerhard
@ 2016-09-09  9:47 ` Martin Wohlert
  2016-09-09 10:08   ` Marc Joliet
  0 siblings, 1 reply; 4+ messages in thread
From: Martin Wohlert @ 2016-09-09  9:47 UTC (permalink / raw
  To: gentoo-user-de


[-- Attachment #1.1: Type: text/plain, Size: 1626 bytes --]

Hallo Gerhard,

na da sagt dmesg dir doch schon direkt, was das Problem ist und wie du
es lösen kannst.

Da fehlen einfach noch ein paar Firmware Files, die wohl in
linux-firmware nicht enthalten sind. Aber wenn du dem Link von dmesg
folgst, wirst du die Files erhalten und musst sie nur entsprechend in
/lib/firmware ablegen.

LG
Martin

Am 09.09.2016 um 10:31 schrieb Gössl Gerhard:
> Hallo ,
> 
> dmesg bringt bei meinem selbstgebackenen Kernel
> 
> folgendes:
> 
> 
> 
> b43-phy0: Broadcom 4311 WLAN found (core revision 13)
> b43-phy0: Found PHY: Analog 4, Type 2 (G), Revision 9
> b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 2, Version 0
> b43-phy0 warning: 5 GHz band is unsupported on this PHY
> b43 ssb0:0: Direct firmware load for b43/ucode13.fw failed with error -2
> b43 ssb0:0: Direct firmware load for b43/ucode13.fw failed with error -2
> b43 ssb0:0: Direct firmware load for b43-open/ucode13.fw failed with
> error -2
> b43 ssb0:0: Direct firmware load for b43-open/ucode13.fw failed with
> error -2
> b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found
> b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
> b43-phy0 ERROR: You must go to
> http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and
> download the correct firmware for this driver version. Please carefully
> read all instructions on this website.
> 
> 
> 
> Habe aber sys-kernel/linux-firmware-20160628 installiert !!
> 
> Die Treiber für den Broadcom 4311 sind als Module installiert.
> 
> 
> 
> 
> GRUß
> 
> Gerhard Gössl
> 
> isny im ALL
> 


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 1495 bytes --]

^ permalink raw reply	[flat|nested] 4+ messages in thread
* Re: [gentoo-user-de] firmware load for b43/ucode13.fw failed
  2016-09-09  9:47 ` Martin Wohlert
@ 2016-09-09 10:08   ` Marc Joliet
  0 siblings, 0 replies; 4+ messages in thread
From: Marc Joliet @ 2016-09-09 10:08 UTC (permalink / raw
  To: gentoo-user-de


[-- Attachment #1.1: Type: text/plain, Size: 18795 bytes --]

=2D-nextPart1783164.AtR0fxBHLY
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain; charset="utf-8"

On Friday 09 September 2016 11:47:37 Martin Wohlert wrote:
> Hallo Gerhard,
>=20
> na da sagt dmesg dir doch schon direkt, was das Problem ist und wie d=
u
> es l=C3=B6sen kannst.
>=20
> Da fehlen einfach noch ein paar Firmware Files, die wohl in
> linux-firmware nicht enthalten sind. Aber wenn du dem Link von dmesg
> folgst, wirst du die Files erhalten und musst sie nur entsprechend in=

> /lib/firmware ablegen.

Wo dmesg doch b43 erw=C3=A4hnt, was ist mit:

% eix -sS b43
* net-wireless/b43-fwcutter
     Verf=C3=BCgbare Versionen:   019
     Startseite:             http://bues.ch/b43/fwcutter
     Beschreibung:           Firmware Tool for Broadcom 43xx based wire=
less network=20
devices using the mac80211 wireless stack

* sys-firmware/b43-firmware
     Verf=C3=BCgbare Versionen:   (b43) ~5.100.138^mbs ~6.30.163.46^mbs=

     Startseite:             http://linuxwireless.org/en/users/Drivers/=
b43
     Beschreibung:           broadcom firmware for b43 LP PHY and >=3Dl=
inux-3.2

* sys-firmware/b43legacy-firmware
     Verf=C3=BCgbare Versionen:   ~3.130.20.0^mbs
     Startseite:             http://linuxwireless.org/en/users/Drivers/=
b43
     Beschreibung:           broadcom firmware for b43legacy/bcm43xx

3 Treffer

> LG
> Martin
>=20
> Am 09.09.2016 um 10:31 schrieb G=C3=B6ssl Gerhard:
> > Hallo ,
> >=20
> > dmesg bringt bei meinem selbstgebackenen Kernel
> >=20
> > folgendes:
> >=20
> >=20
> >=20
> > b43-phy0: Broadcom 4311 WLAN found (core revision 13)
> > b43-phy0: Found PHY: Analog 4, Type 2 (G), Revision 9
> > b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 2, Version =
0
> > b43-phy0 warning: 5 GHz band is unsupported on this PHY
> > b43 ssb0:0: Direct firmware load for b43/ucode13.fw failed with err=
or -2
> > b43 ssb0:0: Direct firmware load for b43/ucode13.fw failed with err=
or -2
> > b43 ssb0:0: Direct firmware load for b43-open/ucode13.fw failed wit=
h
> > error -2
> > b43 ssb0:0: Direct firmware load for b43-open/ucode13.fw failed wit=
h
> > error -2
> > b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found
> > b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
> > b43-phy0 ERROR: You must go to
> > http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and
> > download the correct firmware for this driver version. Please caref=
ully
> > read all instructions on this website.
> >=20
> >=20
> >=20
> > Habe aber sys-kernel/linux-firmware-20160628 installiert !!
> >=20
> > Die Treiber f=C3=BCr den Broadcom 4311 sind als Module installiert.=

> >=20
> >=20
> >=20
> >=20
> > GRU=C3=9F
> >=20
> > Gerhard G=C3=B6ssl
> >=20
> > isny im ALL

Viele Gr=C3=BC=C3=9Fe
=2D-=20
Marc Joliet
=2D-
"People who think they know everything really annoy those of us who kno=
w we
don't" - Bjarne Stroustrup


=2D-nextPart1783164.AtR0fxBHLY
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html; charset="utf-8"

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/=
REC-html40/strict.dtd">
<html><head><meta name=3D"qrichtext" content=3D"1" /><style type=3D"tex=
t/css">
p, li { white-space: pre-wrap; }
</style></head><body style=3D" font-family:'DejaVu Sans Mono'; font-siz=
e:11pt; font-weight:400; font-style:normal;">
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">On =
Friday 09 September 2016 11:47:37 Martin Wohlert wrote:</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; Hallo Gerhard,</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; </p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; na da sagt dmesg dir doch schon direkt, was das Problem ist und wie d=
u</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; es l=C3=B6sen kannst.</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; </p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; Da fehlen einfach noch ein paar Firmware Files, die wohl in</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; linux-firmware nicht enthalten sind. Aber wenn du dem Link von dmesg<=
/p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; folgst, wirst du die Files erhalten und musst sie nur entsprechend in=
</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; /lib/firmware ablegen.</p>
<p style=3D"-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px=
; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0p=
x; ">&nbsp;</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">Wo =
dmesg doch b43 erw=C3=A4hnt, was ist mit:</p>
<p style=3D"-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px=
; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0p=
x; ">&nbsp;</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">% e=
ix -sS b43</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">* n=
et-wireless/b43-fwcutter</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">   =
  Verf=C3=BCgbare Versionen:   019</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">   =
  Startseite:             http://bues.ch/b43/fwcutter</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">   =
  Beschreibung:           Firmware Tool for Broadcom 43xx based wireles=
s network devices using the mac80211 wireless stack</p>
<p style=3D"-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px=
; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0p=
x; ">&nbsp;</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">* s=
ys-firmware/b43-firmware</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">   =
  Verf=C3=BCgbare Versionen:   (b43) ~5.100.138^mbs ~6.30.163.46^mbs</p=
>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">   =
  Startseite:             http://linuxwireless.org/en/users/Drivers/b43=
</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">   =
  Beschreibung:           broadcom firmware for b43 LP PHY and &gt;=3Dl=
inux-3.2</p>
<p style=3D"-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px=
; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0p=
x; ">&nbsp;</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">* s=
ys-firmware/b43legacy-firmware</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">   =
  Verf=C3=BCgbare Versionen:   ~3.130.20.0^mbs</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">   =
  Startseite:             http://linuxwireless.org/en/users/Drivers/b43=
</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">   =
  Beschreibung:           broadcom firmware for b43legacy/bcm43xx</p>
<p style=3D"-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px=
; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0p=
x; ">&nbsp;</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">3 T=
reffer</p>
<p style=3D"-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px=
; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0p=
x; ">&nbsp;</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; LG</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; Martin</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; </p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; Am 09.09.2016 um 10:31 schrieb G=C3=B6ssl Gerhard:</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; Hallo ,</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; </p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; dmesg bringt bei meinem selbstgebackenen Kernel</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; </p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; folgendes:</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; </p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; </p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; </p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; b43-phy0: Broadcom 4311 WLAN found (core revision 13)</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; b43-phy0: Found PHY: Analog 4, Type 2 (G), Revision 9</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 2, Versi=
on 0</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; b43-phy0 warning: 5 GHz band is unsupported on this PHY</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; b43 ssb0:0: Direct firmware load for b43/ucode13.fw failed with =
error -2</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; b43 ssb0:0: Direct firmware load for b43/ucode13.fw failed with =
error -2</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; b43 ssb0:0: Direct firmware load for b43-open/ucode13.fw failed =
with</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; error -2</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; b43 ssb0:0: Direct firmware load for b43-open/ucode13.fw failed =
with</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; error -2</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; b43-phy0 ERROR: Firmware file &quot;b43/ucode13.fw&quot; not fou=
nd</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; b43-phy0 ERROR: Firmware file &quot;b43-open/ucode13.fw&quot; no=
t found</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; b43-phy0 ERROR: You must go to</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware a=
nd</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; download the correct firmware for this driver version. Please ca=
refully</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; read all instructions on this website.</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; </p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; </p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; </p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; Habe aber sys-kernel/linux-firmware-20160628 installiert !!</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; </p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; Die Treiber f=C3=BCr den Broadcom 4311 sind als Module installie=
rt.</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; </p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; </p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; </p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; </p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; GRU=C3=9F</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; </p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; Gerhard G=C3=B6ssl</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; </p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&gt=
; &gt; isny im ALL</p>
<p style=3D"-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px=
; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0p=
x; ">&nbsp;</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">Vie=
le Gr=C3=BC=C3=9Fe</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">-- =
</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">Mar=
c Joliet</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">--<=
/p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">&qu=
ot;People who think they know everything really annoy those of us who k=
now we</p>
<p style=3D" margin-top:0px; margin-bottom:0px; margin-left:0px; margin=
=2Dright:0px; -qt-block-indent:0; text-indent:0px; -qt-user-state:0;">don=
't&quot; - Bjarne Stroustrup</p>
<p style=3D"-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px=
; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0p=
x; ">&nbsp;</p></body></html>
=2D-nextPart1783164.AtR0fxBHLY--
This is a multi-part message in MIME format.

[-- Attachment #1.2: Type: text/plain, Size: 2740 bytes --]

On Friday 09 September 2016 11:47:37 Martin Wohlert wrote:
> Hallo Gerhard,
> 
> na da sagt dmesg dir doch schon direkt, was das Problem ist und wie du
> es lösen kannst.
> 
> Da fehlen einfach noch ein paar Firmware Files, die wohl in
> linux-firmware nicht enthalten sind. Aber wenn du dem Link von dmesg
> folgst, wirst du die Files erhalten und musst sie nur entsprechend in
> /lib/firmware ablegen.

Wo dmesg doch b43 erwähnt, was ist mit:

% eix -sS b43
* net-wireless/b43-fwcutter
     Verfügbare Versionen:   019
     Startseite:             http://bues.ch/b43/fwcutter
     Beschreibung:           Firmware Tool for Broadcom 43xx based wireless network 
devices using the mac80211 wireless stack

* sys-firmware/b43-firmware
     Verfügbare Versionen:   (b43) ~5.100.138^mbs ~6.30.163.46^mbs
     Startseite:             http://linuxwireless.org/en/users/Drivers/b43
     Beschreibung:           broadcom firmware for b43 LP PHY and >=linux-3.2

* sys-firmware/b43legacy-firmware
     Verfügbare Versionen:   ~3.130.20.0^mbs
     Startseite:             http://linuxwireless.org/en/users/Drivers/b43
     Beschreibung:           broadcom firmware for b43legacy/bcm43xx

3 Treffer

> LG
> Martin
> 
> Am 09.09.2016 um 10:31 schrieb Gössl Gerhard:
> > Hallo ,
> > 
> > dmesg bringt bei meinem selbstgebackenen Kernel
> > 
> > folgendes:
> > 
> > 
> > 
> > b43-phy0: Broadcom 4311 WLAN found (core revision 13)
> > b43-phy0: Found PHY: Analog 4, Type 2 (G), Revision 9
> > b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 2, Version 0
> > b43-phy0 warning: 5 GHz band is unsupported on this PHY
> > b43 ssb0:0: Direct firmware load for b43/ucode13.fw failed with error -2
> > b43 ssb0:0: Direct firmware load for b43/ucode13.fw failed with error -2
> > b43 ssb0:0: Direct firmware load for b43-open/ucode13.fw failed with
> > error -2
> > b43 ssb0:0: Direct firmware load for b43-open/ucode13.fw failed with
> > error -2
> > b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found
> > b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found
> > b43-phy0 ERROR: You must go to
> > http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and
> > download the correct firmware for this driver version. Please carefully
> > read all instructions on this website.
> > 
> > 
> > 
> > Habe aber sys-kernel/linux-firmware-20160628 installiert !!
> > 
> > Die Treiber für den Broadcom 4311 sind als Module installiert.
> > 
> > 
> > 
> > 
> > GRUß
> > 
> > Gerhard Gössl
> > 
> > isny im ALL

Viele Grüße
-- 
Marc Joliet
--
"People who think they know everything really annoy those of us who know we
don't" - Bjarne Stroustrup


[-- Attachment #1.3: Type: text/html, Size: 15050 bytes --]

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

^ permalink raw reply	[flat|nested] 4+ messages in thread
* [gentoo-user-de]  firmware load for b43/ucode13.fw failed
@ 2016-09-09 11:29 Gössl Gerhard
  0 siblings, 0 replies; 4+ messages in thread
From: Gössl Gerhard @ 2016-09-09 11:29 UTC (permalink / raw
  To: gentoo-user-de

Hallo,


b43-fwcutter  -w  /lib/firmware/   /lib/firmware/b43/ucode13.fw

bringt :


Sorry, the input file is either wrong or not supported by b43-fwcutter.
This file has an unknown  MD5sum  xxxxxxxxxxxxxxxxxxxx.


gruß


gg



isny im ALL




^ permalink raw reply	[flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-09-09 11:49 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-09-09  8:31 [gentoo-user-de] firmware load for b43/ucode13.fw failed Gössl Gerhard
2016-09-09  9:47 ` Martin Wohlert
2016-09-09 10:08   ` Marc Joliet
  -- strict thread matches above, loose matches on Subject: below --
2016-09-09 11:29 Gössl Gerhard

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox