public inbox for gentoo-user-de@lists.gentoo.org
 help / color / mirror / Atom feed
* [gentoo-user-de] md-device zu klein: Was mach ich falsch?
@ 2008-10-23  8:49 Stefan G. Weichinger
  2008-10-23  9:21 ` Dirk Heinrichs
  0 siblings, 1 reply; 3+ messages in thread
From: Stefan G. Weichinger @ 2008-10-23  8:49 UTC (permalink / raw
  To: gentoo-user-de


Hallo,

nachdem ich auf der englischsprachigen Liste bislang keinerlei Feedback
dazu erhalten habe, möchte ich auch hier mal mein Problem schildern.

Ich will ein Software-RAID-device über 4 SATA-Platten aufbauen:

# fdisk -l | grep "sd"
Platte /dev/sda: 1000.2 GByte, 1000204886016 Byte
/dev/sda1               1           2       16033+  fd  Linux raid
autodetect
/dev/sda2               3          21      152617+  82  Linux Swap / Solaris
/dev/sda3              22        1116     8795587+  fd  Linux raid
autodetect
/dev/sda4            1117      121601   967795762+  fd  Linux raid
autodetect
Platte /dev/sdb: 1000.2 GByte, 1000204886016 Byte
/dev/sdb1               1           2       16033+  fd  Linux raid
autodetect
/dev/sdb2               3          21      152617+  82  Linux Swap / Solaris
/dev/sdb3              22        1116     8795587+  fd  Linux raid
7autodetect
/dev/sdb4            1117      121601   967795762+  fd  Linux raid
autodetect
Platte /dev/sdc: 1000.2 GByte, 1000204886016 Byte
/dev/sdc1               1           2       16033+  fd  Linux raid
autodetect
/dev/sdc2               3          21      152617+  82  Linux Swap / Solaris
/dev/sdc3              22        1116     8795587+  fd  Linux raid
autodetect
/dev/sdc4            1117      121601   967795762+  fd  Linux raid
autodetect
Platte /dev/sdd: 1000.2 GByte, 1000204886016 Byte
/dev/sdd1               1           2       16033+  fd  Linux raid
autodetect
/dev/sdd2               3          21      152617+  82  Linux Swap / Solaris
/dev/sdd3              22        1116     8795587+  fd  Linux raid
autodetect
/dev/sdd4            1117      121601   967795762+  fd  Linux raid
autodetect


Ich will ein RAID5 auf /dev/md2, ohne Hotspare, bestehend aus den
Partitionen "/dev/sd?4".

Das kommt raus:

# cat /proc/mdstat
Personalities : [raid0] [raid1] [raid10] [raid6] [raid5] [raid4]
md1 : active raid5 sdd3[3](S) sdc3[2] sdb3[1] sda3[0]
      17591040 blocks level 5, 64k chunk, algorithm 2 [3/3] [UUU]

md2 : active raid5 sdd4[3] sdc4[2] sdb4[1] sda4[0]
      2903386944 blocks level 5, 64k chunk, algorithm 2 [4/4] [UUUU]

md0 : active raid1 sdb1[1] sda1[0]
      15936 blocks [2/2] [UU]


md2 sollte meiner Meinung nach grob 3 TB gross werden (ca. 2.7TB, 3 *
~900GB), wird aber nur 774 GB gross:

# fdisk -l /dev/md2

Platte /dev/md2: 774.0 GByte, 774044975104 Byte
2 Köpfe, 4 Sektoren/Spuren, 188975824 Zylinder
Einheiten = Zylinder von 8 × 512 = 4096 Bytes
Disk identifier: 0x00000000


Warum das?

# cat /proc/version
Linux version 2.6.25-gentoo-r8 (root@horde) (gcc version 4.1.2 (Gentoo
4.1.2 p1.1)) #2 SMP Wed Oct 22 11:07:19 CEST 2008

Vielleicht irgendwas falsch an meinem Kernel?

Ein Aspekt, der vielleicht irgendwas damit zu tun hat, ist, daß ich
nicht gleich SMP aktiviert hatte, da wurde nur eine CPU angezeigt (ist
ein Quadcore Opteron), und wegen fehlendem HIGHMEM auch nur 1GB RAM von
den 2, die drin sind.

Diese Dinge sind im jetzigen Kernel gelöst.

Es wurde auch alles komplett mit passenden CFLAGS re-emerged ... das
System kam von einer Core2Duo-Installation und wurde migriert.

Danke für jeglichen Hinweis,
Stefan




^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [gentoo-user-de] md-device zu klein: Was mach ich falsch?
  2008-10-23  8:49 [gentoo-user-de] md-device zu klein: Was mach ich falsch? Stefan G. Weichinger
@ 2008-10-23  9:21 ` Dirk Heinrichs
  2008-10-23  9:46   ` Stefan G. Weichinger
  0 siblings, 1 reply; 3+ messages in thread
From: Dirk Heinrichs @ 2008-10-23  9:21 UTC (permalink / raw
  To: gentoo-user-de

[-- Attachment #1: Type: text/plain, Size: 495 bytes --]

Am Donnerstag 23 Oktober 2008 10:49:15 schrieb ext Stefan G. Weichinger:

> Vielleicht irgendwas falsch an meinem Kernel?

Kein CONFIG_LBD?

Bye...

	Dirk
-- 
Dirk Heinrichs          | Tel:  +49 (0)162 234 3408
Configuration Manager   | Fax:  +49 (0)211 47068 111
Capgemini Deutschland   | Mail: dirk.heinrichs@capgemini.com
Wanheimerstraße 68      | Web:  http://www.capgemini.com
D-40468 Düsseldorf      | ICQ#: 110037733
GPG Public Key C2E467BB | Keyserver: wwwkeys.pgp.net


[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [gentoo-user-de] md-device zu klein: Was mach ich falsch?
  2008-10-23  9:21 ` Dirk Heinrichs
@ 2008-10-23  9:46   ` Stefan G. Weichinger
  0 siblings, 0 replies; 3+ messages in thread
From: Stefan G. Weichinger @ 2008-10-23  9:46 UTC (permalink / raw
  To: gentoo-user-de

Dirk Heinrichs schrieb:
> Am Donnerstag 23 Oktober 2008 10:49:15 schrieb ext Stefan G. Weichinger:
> 
>> Vielleicht irgendwas falsch an meinem Kernel?
> 
> Kein CONFIG_LBD?

YES! Herzlichen Dank, genau das war's ...
Stefan



^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2008-10-23  9:46 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-10-23  8:49 [gentoo-user-de] md-device zu klein: Was mach ich falsch? Stefan G. Weichinger
2008-10-23  9:21 ` Dirk Heinrichs
2008-10-23  9:46   ` Stefan G. Weichinger

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox