From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from pigeon.gentoo.org ([69.77.167.62] helo=lists.gentoo.org) by finch.gentoo.org with esmtp (Exim 4.60) (envelope-from ) id 1Ksvsf-0004L6-G1 for garchives@archives.gentoo.org; Thu, 23 Oct 2008 08:49:21 +0000 Received: from pigeon.gentoo.org (localhost [127.0.0.1]) by pigeon.gentoo.org (Postfix) with SMTP id A00B3E0238; Thu, 23 Oct 2008 08:49:20 +0000 (UTC) Received: from zion.lichtfels.com (zion.lichtfels.com [88.198.33.170]) by pigeon.gentoo.org (Postfix) with ESMTP id 578CEE0238 for ; Thu, 23 Oct 2008 08:49:20 +0000 (UTC) Received: from localhost (localhost [127.0.0.1]) by zion.lichtfels.com (Postfix) with ESMTP id 3E626184006 for ; Thu, 23 Oct 2008 10:49:13 +0200 (CEST) Received: from zion.lichtfels.com ([127.0.0.1]) by localhost (zion [127.0.0.1]) (amavisd-maia, port 10024) with LMTP id 03837-06 for ; Thu, 23 Oct 2008 10:49:12 +0200 (CEST) Received: from [172.32.99.12] (mail.oops.co.at [213.129.238.225]) by zion.lichtfels.com (Postfix) with ESMTPA id 2CF31184002 for ; Thu, 23 Oct 2008 10:49:12 +0200 (CEST) Message-ID: <49003A8B.1000609@xunil.at> Date: Thu, 23 Oct 2008 10:49:15 +0200 From: "Stefan G. Weichinger" Organization: oops! User-Agent: Thunderbird 2.0.0.17 (X11/20081001) Precedence: bulk List-Post: List-Help: List-Unsubscribe: List-Subscribe: List-Id: Gentoo Linux mail X-BeenThere: gentoo-user-de@lists.gentoo.org Reply-to: gentoo-user-de@lists.gentoo.org MIME-Version: 1.0 To: gentoo-user-de@lists.gentoo.org Subject: [gentoo-user-de] md-device zu klein: Was mach ich falsch? X-Enigmail-Version: 0.95.7 Content-Type: text/plain; charset=ISO-8859-1 X-Virus-Scanned: amavisd-maia at lichtfels.com Content-Transfer-Encoding: quoted-printable X-Archives-Salt: 39fc340b-bc52-4820-a2d6-4700e78f2585 X-Archives-Hash: d28b4e89a994898e17212e780ed80b43 Hallo, nachdem ich auf der englischsprachigen Liste bislang keinerlei Feedback dazu erhalten habe, m=F6chte ich auch hier mal mein Problem schildern. Ich will ein Software-RAID-device =FCber 4 SATA-Platten aufbauen: # fdisk -l | grep "sd" Platte /dev/sda: 1000.2 GByte, 1000204886016 Byte /dev/sda1 1 2 16033+ fd Linux raid autodetect /dev/sda2 3 21 152617+ 82 Linux Swap / Sola= ris /dev/sda3 22 1116 8795587+ fd Linux raid autodetect /dev/sda4 1117 121601 967795762+ fd Linux raid autodetect Platte /dev/sdb: 1000.2 GByte, 1000204886016 Byte /dev/sdb1 1 2 16033+ fd Linux raid autodetect /dev/sdb2 3 21 152617+ 82 Linux Swap / Sola= ris /dev/sdb3 22 1116 8795587+ fd Linux raid 7autodetect /dev/sdb4 1117 121601 967795762+ fd Linux raid autodetect Platte /dev/sdc: 1000.2 GByte, 1000204886016 Byte /dev/sdc1 1 2 16033+ fd Linux raid autodetect /dev/sdc2 3 21 152617+ 82 Linux Swap / Sola= ris /dev/sdc3 22 1116 8795587+ fd Linux raid autodetect /dev/sdc4 1117 121601 967795762+ fd Linux raid autodetect Platte /dev/sdd: 1000.2 GByte, 1000204886016 Byte /dev/sdd1 1 2 16033+ fd Linux raid autodetect /dev/sdd2 3 21 152617+ 82 Linux Swap / Sola= ris /dev/sdd3 22 1116 8795587+ fd Linux raid autodetect /dev/sdd4 1117 121601 967795762+ fd Linux raid autodetect Ich will ein RAID5 auf /dev/md2, ohne Hotspare, bestehend aus den Partitionen "/dev/sd?4". Das kommt raus: # cat /proc/mdstat Personalities : [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] md1 : active raid5 sdd3[3](S) sdc3[2] sdb3[1] sda3[0] 17591040 blocks level 5, 64k chunk, algorithm 2 [3/3] [UUU] md2 : active raid5 sdd4[3] sdc4[2] sdb4[1] sda4[0] 2903386944 blocks level 5, 64k chunk, algorithm 2 [4/4] [UUUU] md0 : active raid1 sdb1[1] sda1[0] 15936 blocks [2/2] [UU] md2 sollte meiner Meinung nach grob 3 TB gross werden (ca. 2.7TB, 3 * ~900GB), wird aber nur 774 GB gross: # fdisk -l /dev/md2 Platte /dev/md2: 774.0 GByte, 774044975104 Byte 2 K=F6pfe, 4 Sektoren/Spuren, 188975824 Zylinder Einheiten =3D Zylinder von 8 =D7 512 =3D 4096 Bytes Disk identifier: 0x00000000 Warum das? # cat /proc/version Linux version 2.6.25-gentoo-r8 (root@horde) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #2 SMP Wed Oct 22 11:07:19 CEST 2008 Vielleicht irgendwas falsch an meinem Kernel? Ein Aspekt, der vielleicht irgendwas damit zu tun hat, ist, da=DF ich nicht gleich SMP aktiviert hatte, da wurde nur eine CPU angezeigt (ist ein Quadcore Opteron), und wegen fehlendem HIGHMEM auch nur 1GB RAM von den 2, die drin sind. Diese Dinge sind im jetzigen Kernel gel=F6st. Es wurde auch alles komplett mit passenden CFLAGS re-emerged ... das System kam von einer Core2Duo-Installation und wurde migriert. Danke f=FCr jeglichen Hinweis, Stefan