[gentoo-user-de] X start probleme

public inbox for gentoo-user-de@lists.gentoo.org
 help / color / mirror / Atom feed

* [gentoo-user-de] X start probleme
@ 2017-02-14 17:22 Sebastian
  2017-02-14 17:37 ` Harald Weiner
  0 siblings, 1 reply; 10+ messages in thread
From: Sebastian @ 2017-02-14 17:22 UTC (permalink / raw
  To: Gentoo

Hallo,

ich habe mein System jetzt soweit wieder aufgebaut. Leider läuft der Start von 
KDE nicht wie gewünscht.
Wenn in der /etc/conf.d/xdm sddm aktiv ist dann erhalte ich einen graphischen 
Loginmanager welcher aber keine Passwörter akzeptiert. Ist auch nicht im 
breeze Layout von kde.
Mit Str Alt F1 kann ich mich dann an der Konsole anmelden. Ein Startx geht 
dann natürlich nicht mehr da ja bereits erfolgt.

Wenn ich den SDDM ausschalte in der /etc/conf.d/xdm per # dann kann ich mit 
startx eine xterm starten in dem ich dann mit startkde kde starten kann.
Direkt ein startkde gibt die Meldung Display is not set.

Ich würde gerne direkt kde starten und mich selbst vorausgewält und 
passworteingabe aktiv. Wie komme ich da hin. Mit den X und Kde Anleitungen im 
Wiki bin ich da wo ich jetzt bin und sicher ist es durch meine Versuche nicht 
besser geworden.

Die weitere Probleme das der networkmanager von kde nicht startet dafür aber 
ein wpa-gui und Mausaussetzer etc kann ich danach noch bearbeiten.

Gruß
Sebastian

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [gentoo-user-de] X start probleme
  2017-02-14 17:22 [gentoo-user-de] X start probleme Sebastian
@ 2017-02-14 17:37 ` Harald Weiner
  2017-02-15 13:58   ` Sebastian
  2017-02-15 14:46   ` Sebastian
  0 siblings, 2 replies; 10+ messages in thread
From: Harald Weiner @ 2017-02-14 17:37 UTC (permalink / raw
  To: selist, gentoo-user-de


[-- Attachment #1.1: Type: text/plain, Size: 523 bytes --]

Hallo Sebastian,

was meinst du mit "Loginmanager welcher aber keine Passwörter
akzeptiert"?
Wäre hilfreich wenn du dies etwas genauer ausführen könntest, ebenso
welche
Versionen du verwendest und ob was auffälliges in den Log-files steht.

Bei mir läuft xdm mit sddm und Theme maui (in /etc/sddm.conf) ohne
Probleme:
[Theme]
# Current theme name
Current=maui

Ach ja, musste den user sddm zu der Gruppe video hinzufügen
damit es problemlos ging:
getent group video
video:x:27:harry,sddm

Liebe Grüße,

Harald.




[-- Attachment #1.2: HTML --]
[-- Type: text/html, Size: 1027 bytes --]

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [gentoo-user-de] X start probleme
  2017-02-14 17:37 ` Harald Weiner
@ 2017-02-15 13:58   ` Sebastian
  2017-02-15 14:46   ` Sebastian
  1 sibling, 0 replies; 10+ messages in thread
From: Sebastian @ 2017-02-15 13:58 UTC (permalink / raw
  To: gentoo-user-de

Hallo,

Am Dienstag, 14. Februar 2017, 18:37:25 schrieb Harald Weiner:
> Hallo Sebastian,
> 
> was meinst du mit "Loginmanager welcher aber keine Passwörter
> akzeptiert"?

wie soll ich das beschreiben. Es gibt auf Blauem Hintergrund eine Avatarbild 
eines Users Sebastian welcher auch vorhanden seien müsste. Darunter ist ein 
Feld in welcem ich ein passwort eingeben kann. Obwohl das Passwort richtig ist 
soweit ich das bei den Punkten erkennen kann wird dieses nicht akzeptiert. Auf 
der Konsole aber schon. Auch wenn das Tastaturlayout Amerikanisch ist dürfte 
das für das Passwort so wie es gesetzt ist kein Problem dartsellen.

Dieses Layout sieht zwar so aus als könne man es anpassen aber es gibt keine 
anderen zur auswahl. Zudem gibt es noch die Auswahlmöglichkeit ob man sich an 
Wayland anmelden möchten oder konsole oder kde-plasma wenn ich das richtig im 
Kopf habe. Mehr verrät dieser Loginmanager nicht über sich.
soweit erstmal. Ich werde das ganze nochmal mit #sddm probieren.

aus den logs weiter Unten kann ich nichts entnehmen.

Gruß
Sebastian

> Wäre hilfreich wenn du dies etwas genauer ausführen könntest, ebenso
> welche
> Versionen du verwendest und ob was auffälliges in den Log-files steht.

sddm.log:
[17:26:39.398] (II) DAEMON: Initializing...
[17:26:39.401] (II) DAEMON: Starting...
[17:26:39.401] (II) DAEMON: Adding new display on vt 7 ...
[17:26:39.402] (II) DAEMON: Display server starting...
[17:26:39.402] (II) DAEMON: Running: /usr/bin/X -nolisten tcp -auth 
/var/run/sddm/{8374456f-1395-44a8-8ddf-179eedda199a} -background none -noreset 
-displayfd 17 vt7
[17:26:40.396] (II) DAEMON: Running display setup script  
"/usr/share/sddm/scripts/Xsetup"
[17:26:40.406] (II) DAEMON: Display server started.
[17:26:40.406] (II) DAEMON: Socket server starting...
[17:26:40.406] (II) DAEMON: Socket server started.
[17:26:40.407] (II) DAEMON: Greeter starting...
[17:26:40.408] (II) DAEMON: Adding cookie to 
"/var/run/sddm/{8374456f-1395-44a8-8ddf-179eedda199a}"
[17:26:40.428] (II) HELPER: [PAM] Starting...
[17:26:40.428] (II) HELPER: [PAM] Authenticating...
[17:26:40.428] (II) HELPER: [PAM] returning.
[17:26:40.440] (II) DAEMON: Greeter session started successfully
[17:26:41.131] (II) DAEMON: Message received from greeter: Connect
[17:26:50.496] (II) DAEMON: Message received from greeter: Login
[17:26:50.496] (II) DAEMON: Reading from "/usr/share/xsessions/plasma.desktop"
[17:26:50.497] (II) DAEMON: Reading from "/usr/share/xsessions/plasma.desktop"
[17:26:50.497] (II) DAEMON: Session "/usr/share/xsessions/plasma.desktop" 
selected, command: "/usr/bin/startkde"
[17:26:50.515] (II) HELPER: [PAM] Starting...
[17:26:50.515] (II) HELPER: [PAM] Authenticating...
[17:26:50.515] (II) HELPER: [PAM] Preparing to converse...
[17:26:50.515] (II) HELPER: [PAM] Conversation with 1 messages
[17:26:51.251] (II) HELPER: [PAM] returning.
[17:26:51.251] (WW) HELPER: [PAM] acctMgmt: Authentication failure
[17:26:51.252] (II) HELPER: [PAM] Ended.
[17:26:51.252] (WW) DAEMON: Authentication error: "Authentication failure"
[17:26:51.253] (WW) DAEMON: Auth: sddm-helper exited with 1
[17:28:59.659] (WW) DAEMON: Signal received: SIGTERM
[17:28:59.660] (II) DAEMON: Greeter stopping...
[17:28:59.660] (II) DAEMON: Socket server stopping...
[17:28:59.660] (II) DAEMON: Socket server stopped.
[17:28:59.660] (II) DAEMON: Display server stopping...
[17:28:59.672] (II) DAEMON: Display server stopped.
[17:28:59.672] (II) DAEMON: Running display stop script  
"/usr/share/sddm/scripts/Xstop"
[17:28:59.677] (II) DAEMON: Greeter stopping...
[17:28:59.677] (WW) DAEMON: QProcess: Destroyed while process 
("/usr/libexec/sddm-helper") is still running.


Xorg.log hier ist mir außer den fehlenden Zeichensätzen nichts aufgefallen.

[17:26:39.398] (II) DAEMON: Initializing...
[17:26:39.401] (II) DAEMON: Starting...
[17:26:39.401] (II) DAEMON: Adding new display on vt 7 ...
[17:26:39.402] (II) DAEMON: Display server starting...
[17:26:39.402] (II) DAEMON: Running: /usr/bin/X -nolisten tcp -auth 
/var/run/sddm/{8374456f-1395-44a8-8ddf-179eedda199a} -background none -noreset 
-displayfd 17 vt7
[17:26:40.396] (II) DAEMON: Running display setup script  
"/usr/share/sddm/scripts/Xsetup"
[17:26:40.406] (II) DAEMON: Display server started.
[17:26:40.406] (II) DAEMON: Socket server starting...
[17:26:40.406] (II) DAEMON: Socket server started.
[17:26:40.407] (II) DAEMON: Greeter starting...
[17:26:40.408] (II) DAEMON: Adding cookie to 
"/var/run/sddm/{8374456f-1395-44a8-8ddf-179eedda199a}"
[17:26:40.428] (II) HELPER: [PAM] Starting...
[17:26:40.428] (II) HELPER: [PAM] Authenticating...
[17:26:40.428] (II) HELPER: [PAM] returning.
[17:26:40.440] (II) DAEMON: Greeter session started successfully
[17:26:41.131] (II) DAEMON: Message received from greeter: Connect
[17:26:50.496] (II) DAEMON: Message received from greeter: Login
[17:26:50.496] (II) DAEMON: Reading from "/usr/share/xsessions/plasma.desktop"
[17:26:50.497] (II) DAEMON: Reading from "/usr/share/xsessions/plasma.desktop"
[17:26:50.497] (II) DAEMON: Session "/usr/share/xsessions/plasma.desktop" 
selected, command: "/usr/bin/startkde"
[17:26:50.515] (II) HELPER: [PAM] Starting...
[17:26:50.515] (II) HELPER: [PAM] Authenticating...
[17:26:50.515] (II) HELPER: [PAM] Preparing to converse...
[17:26:50.515] (II) HELPER: [PAM] Conversation with 1 messages
[17:26:51.251] (II) HELPER: [PAM] returning.
[17:26:51.251] (WW) HELPER: [PAM] acctMgmt: Authentication failure
[17:26:51.252] (II) HELPER: [PAM] Ended.
[17:26:51.252] (WW) DAEMON: Authentication error: "Authentication failure"
[17:26:51.253] (WW) DAEMON: Auth: sddm-helper exited with 1
[17:28:59.659] (WW) DAEMON: Signal received: SIGTERM
[17:28:59.660] (II) DAEMON: Greeter stopping...
[17:28:59.660] (II) DAEMON: Socket server stopping...
[17:28:59.660] (II) DAEMON: Socket server stopped.
[17:28:59.660] (II) DAEMON: Display server stopping...
[17:28:59.672] (II) DAEMON: Display server stopped.
[17:28:59.672] (II) DAEMON: Running display stop script  
"/usr/share/sddm/scripts/Xstop"
[17:28:59.677] (II) DAEMON: Greeter stopping...
[17:28:59.677] (WW) DAEMON: QProcess: Destroyed while process 
("/usr/libexec/sddm-helper") is still running.



> 
> Bei mir läuft xdm mit sddm und Theme maui (in /etc/sddm.conf) ohne
> Probleme:
> [Theme]
> # Current theme name
> Current=maui
> 
> Ach ja, musste den user sddm zu der Gruppe video hinzufügen
> damit es problemlos ging:
> getent group video
> video:x:27:harry,sddm
> 
> Liebe Grüße,
> 
> Harald.



^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [gentoo-user-de] X start probleme
  2017-02-14 17:37 ` Harald Weiner
  2017-02-15 13:58   ` Sebastian
@ 2017-02-15 14:46   ` Sebastian
  2017-02-17 19:40     ` [gentoo-user-de] x (kde) " Sebastian
  1 sibling, 1 reply; 10+ messages in thread
From: Sebastian @ 2017-02-15 14:46 UTC (permalink / raw
  To: Gentoo

Hallo,

anbei die Logs von Xorg und sddm mit aktivem sddm in der /etc/conf.d/xdm.
Im sddm log sieht man auch den Fehlgeschlagenen Loginversuch leider gibt mir 
das aber keine weiterführenden Infos.

Gruß
Sebastian

sddm.log:
[15:09:59.972] (II) DAEMON: Initializing...
[15:09:59.977] (II) DAEMON: Starting...
[15:09:59.978] (II) DAEMON: Adding new display on vt 7 ...
[15:09:59.979] (II) DAEMON: Display server starting...
[15:09:59.979] (II) DAEMON: Running: /usr/bin/X -nolisten tcp -auth 
/var/run/sddm/{a61bd9f5-ae7a-414f-bf02-59c51f169485} -background none -noreset 
-displayfd 18 vt7
[15:10:00.999] (II) DAEMON: Running display setup script  
"/usr/share/sddm/scripts/Xsetup"
[15:10:01.006] (II) DAEMON: Display server started.
[15:10:01.006] (II) DAEMON: Socket server starting...
[15:10:01.007] (II) DAEMON: Socket server started.
[15:10:01.007] (II) DAEMON: Greeter starting...
[15:10:01.008] (II) DAEMON: Adding cookie to "/var/run/sddm/{a61bd9f5-
ae7a-414f-bf02-59c51f169485}"
[15:10:01.027] (II) HELPER: [PAM] Starting...
[15:10:01.027] (II) HELPER: [PAM] Authenticating...
[15:10:01.027] (II) HELPER: [PAM] returning.
[15:10:01.038] (II) DAEMON: Greeter session started successfully
[15:10:01.281] (II) DAEMON: Message received from greeter: Connect
[15:10:27.069] (II) DAEMON: Message received from greeter: Login
[15:10:27.069] (II) DAEMON: Reading from "/usr/share/xsessions/plasma.desktop"
[15:10:27.070] (II) DAEMON: Reading from "/usr/share/xsessions/plasma.desktop"
[15:10:27.070] (II) DAEMON: Session "/usr/share/xsessions/plasma.desktop" 
selected, command: "/usr/bin/startkde"
[15:10:27.090] (II) HELPER: [PAM] Starting...
[15:10:27.090] (II) HELPER: [PAM] Authenticating...
[15:10:27.090] (II) HELPER: [PAM] Preparing to converse...
[15:10:27.090] (II) HELPER: [PAM] Conversation with 1 messages
[15:10:27.722] (II) HELPER: [PAM] returning.
[15:10:27.722] (WW) HELPER: [PAM] acctMgmt: Authentication failure
[15:10:27.722] (II) HELPER: [PAM] Ended.
[15:10:27.722] (WW) DAEMON: Authentication error: "Authentication failure"
[15:10:27.724] (WW) DAEMON: Auth: sddm-helper exited with 1
[15:21:00.493] (WW) DAEMON: Signal received: SIGTERM
[15:21:00.494] (II) DAEMON: Greeter stopping...
[15:21:00.494] (II) DAEMON: Socket server stopping...
[15:21:00.494] (II) DAEMON: Socket server stopped.
[15:21:00.494] (II) DAEMON: Display server stopping...
[15:21:00.506] (II) DAEMON: Display server stopped.
[15:21:00.506] (II) DAEMON: Running display stop script  
"/usr/share/sddm/scripts/Xstop"
[15:21:00.510] (II) DAEMON: Greeter stopping...
[15:21:00.510] (WW) DAEMON: QProcess: Destroyed while process 
("/usr/libexec/sddm-helper") is still running.

Xorg.log:
[    25.026] (--) Log file renamed from "/var/log/Xorg.pid-4175.log" to 
"/var/log/Xorg.0.log"
[    25.027] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[    25.027] X Protocol Version 11, Revision 0
[    25.027] Build Operating System: Linux 4.4.0-62-generic x86_64 Gentoo
[    25.027] Current Operating System: Linux l1-gentoo 4.9.6-gentoo-
r1-20.g4e0ffc2-desktop #3 SMP PREEMPT Fri Feb 10 14:24:32 CET 2017 x86_64
[    25.027] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.6-gentoo-
r1-20.g4e0ffc2-desktop root=UUID=4003a983-b563-4b00-ab0e-0c6caf80b18c ro
[    25.027] Build Date: 06 February 2017  10:55:16AM
[    25.027]  
[    25.027] Current version of pixman: 0.34.0
[    25.027] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    25.027] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    25.027] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 15 15:10:00 
2017
[    25.030] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    25.030] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    25.031] (==) No Layout section.  Using the first Screen section.
[    25.031] (==) No screen section available. Using defaults.
[    25.031] (**) |-->Screen "Default Screen Section" (0)
[    25.031] (**) |   |-->Monitor "<default monitor>"
[    25.031] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    25.031] (**) |   |-->Device "radeon"
[    25.031] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    25.031] (==) Automatically adding devices
[    25.031] (==) Automatically enabling devices
[    25.031] (==) Automatically adding GPU devices
[    25.031] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    25.033] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[    25.033] 	Entry deleted from font path.
[    25.033] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    25.033] 	Entry deleted from font path.
[    25.033] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    25.033] 	Entry deleted from font path.
[    25.034] (WW) `fonts.dir' not found (or not valid) in 
"/usr/share/fonts/100dpi/".
[    25.034] 	Entry deleted from font path.
[    25.034] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    25.034] (WW) `fonts.dir' not found (or not valid) in 
"/usr/share/fonts/75dpi/".
[    25.034] 	Entry deleted from font path.
[    25.034] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    25.034] (==) FontPath set to:
	/usr/share/fonts/misc/
[    25.034] (==) ModulePath set to "/usr/lib64/xorg/modules"
[    25.034] (II) The server relies on udev to provide the list of input 
devices.
	If no devices become available, reconfigure udev or disable 
AutoAddDevices.
[    25.034] (II) Loader magic: 0x81bc80
[    25.034] (II) Module ABI versions:
[    25.034] 	X.Org ANSI C Emulation: 0.4
[    25.034] 	X.Org Video Driver: 20.0
[    25.034] 	X.Org XInput driver : 22.1
[    25.034] 	X.Org Server Extension : 9.0
[    25.035] (II) xfree86: Adding drm device (/dev/dri/card0)
[    25.039] (--) PCI:*(0:0:1:0) 1002:9641:17aa:21ea rev 0, Mem @ 
0xe0000000/268435456, 0xf0b00000/262144, I/O @ 0x00004000/256, BIOS @ 
0x????????/131072
[    25.039] (II) LoadModule: "glx"
[    25.041] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[    25.065] (II) Module glx: vendor="X.Org Foundation"
[    25.065] 	compiled for 1.18.4, module version = 1.0.0
[    25.065] 	ABI class: X.Org Server Extension, version 9.0
[    25.065] (==) AIGLX enabled
[    25.065] (II) LoadModule: "radeon"
[    25.066] (II) Loading /usr/lib64/xorg/modules/drivers/radeon_drv.so
[    25.071] (II) Module radeon: vendor="X.Org Foundation"
[    25.071] 	compiled for 1.18.4, module version = 7.7.0
[    25.072] 	Module class: X.Org Video Driver
[    25.072] 	ABI class: X.Org Video Driver, version 20.0
[    25.072] (II) RADEON: Driver for ATI Radeon chipsets:
	ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
	ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
	ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
	ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
	ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
	ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
	ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
	ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
	ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
	ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
	ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
	ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
	ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
	ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
	ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
	ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835,
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE),
	ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE),
	ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
	ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
	ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
	ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
	ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
	ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
	ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
	ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
	ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
	ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
	ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
	ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
	ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
	ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
	ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
	ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
	ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
	ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
	ATI Mobility Radeon X1700, ATI Radeon X2300HD,
	ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
	ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
	ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
	ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
	ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
	ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
	ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
	ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
	ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
	ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
	ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
	ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
	ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
	ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
	ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
	AMD FireStream 9250, ATI FirePro V8700 (FireGL),
	ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
	ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
	ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
	ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
	ATI Mobility Radeon HD 4670, ATI FirePro M5750,
	ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
	ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
	ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
	ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
	ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
	ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
	ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
	ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
	ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
	ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
	ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
	ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
	ATI Mobility Radeon HD 3850 X2, ATI RV670,
	ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
	ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
	ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
	ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
	ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
	ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
	ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
	ATI FireGL V3600, ATI Radeon HD 2600 LE,
	ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
	ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
	ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
	ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
	ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
	ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
	ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
	ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
	ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
	ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
	SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
	ATI Radeon 4100, ATI Mobility Radeon HD 4200,
	ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
	AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
	AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
	AMD Radeon HD 6300 Series Graphics,
	AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
	AMD Firestream 9350, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
	ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
	ATI Mobility Radeon HD 5800 Series,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
	ATI Mobility Radeon HD 5000 Series,
	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
	ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
	ATI Mobility Radeon HD 5000 Series,
	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
	ATI Mobility Radeon Graphics, CEDAR,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
	ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
	CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
	AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
	CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
	BARTS, BARTS, Mobility Radeon HD 6000 Series,
	Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
	AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
	AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
	CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
	TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
	TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
	PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
	VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
	VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
	VERDE, VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
	OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
	OLAND, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, BONAIRE,
	BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
	BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
	KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
	KABINI, KABINI, KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
	MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
	MULLINS, MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI,
	KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
	KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
	KAVERI, KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
	HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
[    25.084] (++) using VT number 7

[    25.092] (II) [KMS] Kernel modesetting enabled.
[    25.092] (II) RADEON(0): Creating default Display subsection in Screen 
section
	"Default Screen Section" for depth/fbbpp 24/32
[    25.092] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[    25.092] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp 
pixmaps)
[    25.092] (==) RADEON(0): Default visual is TrueColor
[    25.092] (==) RADEON(0): RGB weight 888
[    25.092] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[    25.092] (--) RADEON(0): Chipset: "SUMO" (ChipID = 0x9641)
[    25.092] (II) Loading sub module "fb"
[    25.092] (II) LoadModule: "fb"
[    25.093] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    25.095] (II) Module fb: vendor="X.Org Foundation"
[    25.096] 	compiled for 1.18.4, module version = 1.0.0
[    25.096] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    25.096] (II) Loading sub module "dri2"
[    25.096] (II) LoadModule: "dri2"
[    25.096] (II) Module "dri2" already built-in
[    25.096] (II) Loading sub module "exa"
[    25.096] (II) LoadModule: "exa"
[    25.096] (II) Loading /usr/lib64/xorg/modules/libexa.so
[    25.098] (II) Module exa: vendor="X.Org Foundation"
[    25.098] 	compiled for 1.18.4, module version = 2.6.0
[    25.098] 	ABI class: X.Org Video Driver, version 20.0
[    25.098] (II) RADEON(0): KMS Color Tiling: enabled
[    25.098] (II) RADEON(0): KMS Color Tiling 2D: enabled
[    25.098] (II) RADEON(0): KMS Pageflipping: enabled
[    25.098] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[    25.200] (II) RADEON(0): Output VGA-0 has no monitor section
[    25.225] (II) RADEON(0): Output LVDS has no monitor section
[    25.259] (II) RADEON(0): Output HDMI-0 has no monitor section
[    25.319] (II) RADEON(0): EDID for output VGA-0
[    25.320] (II) RADEON(0): Manufacturer: BNQ  Model: 76d1  Serial#: 17731
[    25.320] (II) RADEON(0): Year: 2006  Week: 37
[    25.320] (II) RADEON(0): EDID Version: 1.3
[    25.320] (II) RADEON(0): Analog Display Input,  Input Voltage Level: 
0.700/0.700 V
[    25.320] (II) RADEON(0): Sync:  Separate  Composite
[    25.320] (II) RADEON(0): Max Image Size [cm]: horiz.: 38  vert.: 30
[    25.320] (II) RADEON(0): Gamma: 2.20
[    25.320] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color 
Display
[    25.320] (II) RADEON(0): First detailed timing is preferred mode
[    25.320] (II) RADEON(0): redX: 0.640 redY: 0.340   greenX: 0.290 greenY: 
0.610
[    25.320] (II) RADEON(0): blueX: 0.140 blueY: 0.070   whiteX: 0.310 whiteY: 
0.330
[    25.320] (II) RADEON(0): Supported established timings:
[    25.320] (II) RADEON(0): 720x400@70Hz
[    25.320] (II) RADEON(0): 640x480@60Hz
[    25.320] (II) RADEON(0): 640x480@67Hz
[    25.320] (II) RADEON(0): 640x480@72Hz
[    25.320] (II) RADEON(0): 640x480@75Hz
[    25.320] (II) RADEON(0): 800x600@60Hz
[    25.320] (II) RADEON(0): 800x600@72Hz
[    25.320] (II) RADEON(0): 800x600@75Hz
[    25.320] (II) RADEON(0): 832x624@75Hz
[    25.320] (II) RADEON(0): 1024x768@60Hz
[    25.320] (II) RADEON(0): 1024x768@70Hz
[    25.320] (II) RADEON(0): 1024x768@75Hz
[    25.320] (II) RADEON(0): 1280x1024@75Hz
[    25.320] (II) RADEON(0): 1152x864@75Hz
[    25.320] (II) RADEON(0): Manufacturer's mask: 0
[    25.320] (II) RADEON(0): Supported standard timings:
[    25.320] (II) RADEON(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 
20337
[    25.320] (II) RADEON(0): #1: hsize: 1280  vsize 1024  refresh: 76  vid: 
36993
[    25.320] (II) RADEON(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 
32897
[    25.320] (II) RADEON(0): #3: hsize: 1280  vsize 1024  refresh: 72  vid: 
35969
[    25.320] (II) RADEON(0): Supported detailed timing:
[    25.320] (II) RADEON(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
[    25.320] (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 
h_blank_end 1688 h_border: 0
[    25.320] (II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 
v_blanking: 1066 v_border: 0
[    25.320] (II) RADEON(0): Supported detailed timing:
[    25.320] (II) RADEON(0): clock: 25.2 MHz   Image Size:  376 x 301 mm
[    25.320] (II) RADEON(0): h_active: 640  h_sync: 656  h_sync_end 752 
h_blank_end 800 h_border: 0
[    25.320] (II) RADEON(0): v_active: 350  v_sync: 387  v_sync_end 389 
v_blanking: 449 v_border: 0
[    25.320] (II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 
83 kHz, PixClock max 145 MHz
[    25.320] (II) RADEON(0): Monitor name: BenQ FP92E
[    25.320] (II) RADEON(0): EDID (in hex):
[    25.320] (II) RADEON(0): 	00ffffffffffff0009d1d17643450000
[    25.320] (II) RADEON(0): 	251001036c261e78eac5c6a3574a9c23
[    25.320] (II) RADEON(0): 	124f54bdef80714f81908180818c0101
[    25.320] (II) RADEON(0): 	010101010101302a009851002a403070
[    25.321] (II) RADEON(0): 	1300782d1100001ed50980a0205e6310
[    25.321] (II) RADEON(0): 	10605208782d1100001a000000fd0038
[    25.321] (II) RADEON(0): 	4c1f530e000a202020202020000000fc
[    25.321] (II) RADEON(0): 	0042656e512046503932450a20200022
[    25.321] (II) RADEON(0): Printing probed modes for output VGA-0
[    25.321] (II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 
1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    25.321] (II) RADEON(0): Modeline "1280x1024"x76.0  141.81  1280 1376 1512 
1744  1024 1025 1028 1070 -hsync +vsync (81.3 kHz)
[    25.321] (II) RADEON(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 
1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    25.321] (II) RADEON(0): Modeline "1280x1024"x72.0  132.84  1280 1368 1504 
1728  1024 1025 1028 1067 -hsync +vsync (76.9 kHz)
[    25.321] (II) RADEON(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 
1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    25.321] (II) RADEON(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 
1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    25.321] (II) RADEON(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 
1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    25.321] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 
1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    25.321] (II) RADEON(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  
624 625 628 667 -hsync -vsync (49.7 kHz e)
[    25.321] (II) RADEON(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  
600 637 643 666 +hsync +vsync (48.1 kHz e)
[    25.321] (II) RADEON(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  
600 601 604 625 +hsync +vsync (46.9 kHz e)
[    25.321] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  
600 601 605 628 +hsync +vsync (37.9 kHz e)
[    25.321] (II) RADEON(0): Modeline "640x480"x75.0   31.50  640 656 720 840  
480 481 484 500 -hsync -vsync (37.5 kHz e)
[    25.321] (II) RADEON(0): Modeline "640x480"x72.8   31.50  640 664 704 832  
480 489 492 520 -hsync -vsync (37.9 kHz e)
[    25.321] (II) RADEON(0): Modeline "640x480"x66.7   30.24  640 704 768 864  
480 483 486 525 -hsync -vsync (35.0 kHz e)
[    25.321] (II) RADEON(0): Modeline "640x480"x59.9   25.18  640 656 752 800  
480 490 492 525 -hsync -vsync (31.5 kHz e)
[    25.321] (II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 900  
400 412 414 449 -hsync +vsync (31.5 kHz e)
[    25.321] (II) RADEON(0): Modeline "640x350"x70.1   25.17  640 656 752 800  
350 387 389 449 +hsync -vsync (31.5 kHz e)
[    25.344] (II) RADEON(0): EDID for output LVDS
[    25.345] (II) RADEON(0): Manufacturer: CMO  Model: 15a3  Serial#: 0
[    25.345] (II) RADEON(0): Year: 2010  Week: 31
[    25.345] (II) RADEON(0): EDID Version: 1.3
[    25.345] (II) RADEON(0): Digital Display Input
[    25.345] (II) RADEON(0): Max Image Size [cm]: horiz.: 35  vert.: 19
[    25.345] (II) RADEON(0): Gamma: 2.20
[    25.345] (II) RADEON(0): No DPMS capabilities specified
[    25.345] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    25.345] (II) RADEON(0): First detailed timing is preferred mode
[    25.345] (II) RADEON(0): redX: 0.617 redY: 0.340   greenX: 0.320 greenY: 
0.598
[    25.345] (II) RADEON(0): blueX: 0.160 blueY: 0.084   whiteX: 0.313 whiteY: 
0.329
[    25.345] (II) RADEON(0): Manufacturer's mask: 0
[    25.345] (II) RADEON(0): Supported detailed timing:
[    25.345] (II) RADEON(0): clock: 69.3 MHz   Image Size:  344 x 193 mm
[    25.345] (II) RADEON(0): h_active: 1366  h_sync: 1382  h_sync_end 1416 
h_blank_end 1466 h_border: 0
[    25.345] (II) RADEON(0): v_active: 768  v_sync: 770  v_sync_end 776 
v_blanking: 788 v_border: 0
[    25.345] (II) RADEON(0):  N156BGE-L11
[    25.345] (II) RADEON(0):  CMO
[    25.345] (II) RADEON(0):  N156BGE-L11
[    25.345] (II) RADEON(0): EDID (in hex):
[    25.345] (II) RADEON(0): 	00ffffffffffff000dafa31500000000
[    25.345] (II) RADEON(0): 	1f140103802313780a00259e57529929
[    25.345] (II) RADEON(0): 	15505400000001010101010101010101
[    25.345] (II) RADEON(0): 	010101010101121b5664500014301022
[    25.345] (II) RADEON(0): 	260058c110000018000000fe004e3135
[    25.345] (II) RADEON(0): 	364247452d4c31310a20000000fe0043
[    25.345] (II) RADEON(0): 	4d4f0a202020202020202020000000fe
[    25.345] (II) RADEON(0): 	004e3135364247452d4c31310a20009b
[    25.345] (II) RADEON(0): Printing probed modes for output LVDS
[    25.345] (II) RADEON(0): Modeline "1366x768"x60.0   69.30  1366 1382 1416 
1466  768 770 776 788 -hsync -vsync (47.3 kHz eP)
[    25.345] (II) RADEON(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 
1664  720 723 728 748 -hsync +vsync (44.8 kHz)
[    25.345] (II) RADEON(0): Modeline "1152x768"x59.8   71.75  1152 1216 1328 
1504  768 771 781 798 -hsync +vsync (47.7 kHz)
[    25.345] (II) RADEON(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 
1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[    25.345] (II) RADEON(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  
600 603 607 624 -hsync +vsync (37.4 kHz)
[    25.345] (II) RADEON(0): Modeline "848x480"x59.7   31.50  848 872 952 1056  
480 483 493 500 -hsync +vsync (29.8 kHz)
[    25.345] (II) RADEON(0): Modeline "720x480"x59.7   26.75  720 744 808 896  
480 483 493 500 -hsync +vsync (29.9 kHz)
[    25.345] (II) RADEON(0): Modeline "640x480"x59.4   23.75  640 664 720 800  
480 483 487 500 -hsync +vsync (29.7 kHz)
[    25.380] (II) RADEON(0): EDID for output HDMI-0
[    25.380] (II) RADEON(0): Manufacturer: ACR  Model: ad63  Serial#: 
1930453342
[    25.380] (II) RADEON(0): Year: 2007  Week: 31
[    25.380] (II) RADEON(0): EDID Version: 1.3
[    25.380] (II) RADEON(0): Digital Display Input
[    25.380] (II) RADEON(0): Max Image Size [cm]: horiz.: 38  vert.: 30
[    25.380] (II) RADEON(0): Gamma: 2.20
[    25.380] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off
[    25.380] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    25.380] (II) RADEON(0): First detailed timing not preferred mode in 
violation of standard!
[    25.380] (II) RADEON(0): redX: 0.650 redY: 0.345   greenX: 0.287 greenY: 
0.600
[    25.380] (II) RADEON(0): blueX: 0.140 blueY: 0.068   whiteX: 0.313 whiteY: 
0.329
[    25.380] (II) RADEON(0): Supported established timings:
[    25.380] (II) RADEON(0): 720x400@70Hz
[    25.380] (II) RADEON(0): 640x480@60Hz
[    25.380] (II) RADEON(0): 640x480@67Hz
[    25.380] (II) RADEON(0): 640x480@72Hz
[    25.380] (II) RADEON(0): 640x480@75Hz
[    25.380] (II) RADEON(0): 800x600@56Hz
[    25.380] (II) RADEON(0): 800x600@60Hz
[    25.380] (II) RADEON(0): 800x600@72Hz
[    25.380] (II) RADEON(0): 800x600@75Hz
[    25.380] (II) RADEON(0): 832x624@75Hz
[    25.380] (II) RADEON(0): 1024x768@60Hz
[    25.380] (II) RADEON(0): 1024x768@70Hz
[    25.380] (II) RADEON(0): 1024x768@75Hz
[    25.380] (II) RADEON(0): 1280x1024@75Hz
[    25.380] (II) RADEON(0): Manufacturer's mask: 0
[    25.380] (II) RADEON(0): Supported detailed timing:
[    25.380] (II) RADEON(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
[    25.380] (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 
h_blank_end 1688 h_border: 0
[    25.380] (II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 
v_blanking: 1066 v_border: 0
[    25.380] (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 
83 kHz, PixClock max 145 MHz
[    25.380] (II) RADEON(0): Serial No: L630C2494057
[    25.380] (II) RADEON(0): Monitor name: AL1917
[    25.380] (II) RADEON(0): EDID (in hex):
[    25.380] (II) RADEON(0): 	00ffffffffffff00047263ad5e611073
[    25.380] (II) RADEON(0): 	1f11010380261e78e89ae5a658499923
[    25.380] (II) RADEON(0): 	115054bfef0001010101010101010101
[    25.380] (II) RADEON(0): 	010101010101302a009851002a403070
[    25.380] (II) RADEON(0): 	1300782d1100001e000000fd00384b1e
[    25.380] (II) RADEON(0): 	530e000a202020202020000000ff004c
[    25.380] (II) RADEON(0): 	36333043323439343035370a000000fc
[    25.380] (II) RADEON(0): 	00414c313931370a202020202020002f
[    25.380] (II) RADEON(0): Printing probed modes for output HDMI-0
[    25.380] (II) RADEON(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 
1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    25.380] (II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 
1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    25.380] (II) RADEON(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 
1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    25.380] (II) RADEON(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 
1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    25.380] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 
1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    25.380] (II) RADEON(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  
624 625 628 667 -hsync -vsync (49.7 kHz e)
[    25.380] (II) RADEON(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  
600 637 643 666 +hsync +vsync (48.1 kHz e)
[    25.380] (II) RADEON(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  
600 601 604 625 +hsync +vsync (46.9 kHz e)
[    25.380] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  
600 601 605 628 +hsync +vsync (37.9 kHz e)
[    25.380] (II) RADEON(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  
600 601 603 625 +hsync +vsync (35.2 kHz e)
[    25.380] (II) RADEON(0): Modeline "640x480"x75.0   31.50  640 656 720 840  
480 481 484 500 -hsync -vsync (37.5 kHz e)
[    25.380] (II) RADEON(0): Modeline "640x480"x72.8   31.50  640 664 704 832  
480 489 492 520 -hsync -vsync (37.9 kHz e)
[    25.380] (II) RADEON(0): Modeline "640x480"x66.7   30.24  640 704 768 864  
480 483 486 525 -hsync -vsync (35.0 kHz e)
[    25.380] (II) RADEON(0): Modeline "640x480"x59.9   25.18  640 656 752 800  
480 490 492 525 -hsync -vsync (31.5 kHz e)
[    25.380] (II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 900  
400 412 414 449 -hsync +vsync (31.5 kHz e)
[    25.380] (II) RADEON(0): Output VGA-0 connected
[    25.380] (II) RADEON(0): Output LVDS connected
[    25.380] (II) RADEON(0): Output HDMI-0 connected
[    25.381] (II) RADEON(0): Using fuzzy aspect match for initial modes
[    25.381] (II) RADEON(0): Output VGA-0 using initial mode 1024x768 +0+0
[    25.381] (II) RADEON(0): Output LVDS using initial mode 1024x768 +0+0
[    25.381] (II) RADEON(0): Output HDMI-0 using initial mode 1024x768 +0+0
[    25.381] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless 
otherwise stated.
[    25.381] (II) RADEON(0): mem size init: gart size :3fdde000 vram size: 
s:20000000 visible:1f71a000
[    25.381] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[    25.381] (==) RADEON(0): DPI set to (96, 96)
[    25.381] (II) Loading sub module "ramdac"
[    25.381] (II) LoadModule: "ramdac"
[    25.381] (II) Module "ramdac" already built-in
[    25.381] (--) Depth 24 pixmap format is 32 bpp
[    25.381] (II) RADEON(0): [DRI2] Setup complete
[    25.381] (II) RADEON(0): [DRI2]   DRI driver: r600
[    25.381] (II) RADEON(0): [DRI2]   VDPAU driver: r600
[    25.381] (II) RADEON(0): Front buffer size: 3072K
[    25.381] (II) RADEON(0): VRAM usage limit set to 460864K
[    25.381] (==) RADEON(0): DRI3 disabled
[    25.381] (==) RADEON(0): Backing store enabled
[    25.381] (II) RADEON(0): Direct rendering enabled
[    25.381] (II) EXA(0): Driver allocated offscreen pixmaps
[    25.381] (II) EXA(0): Driver registered support for the following 
operations:
[    25.381] (II)         Solid
[    25.381] (II)         Copy
[    25.381] (II)         Composite (RENDER acceleration)
[    25.381] (II)         UploadToScreen
[    25.381] (II)         DownloadFromScreen
[    25.381] (II) RADEON(0): Acceleration enabled
[    25.381] (==) RADEON(0): DPMS enabled
[    25.381] (==) RADEON(0): Silken mouse enabled
[    25.381] (II) RADEON(0): Set up textured video
[    25.381] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[    25.382] (II) RADEON(0): [XvMC] Extension initialized.
[    25.382] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR 
disabled message.
[    25.382] (--) RandR disabled
[    25.593] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    25.593] (II) AIGLX: enabled GLX_ARB_create_context
[    25.593] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    25.593] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    25.593] (II) AIGLX: enabled GLX_INTEL_swap_event
[    25.593] (II) AIGLX: enabled GLX_SGI_swap_control and 
GLX_MESA_swap_control
[    25.593] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    25.593] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    25.593] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    25.593] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    25.593] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    25.597] (II) AIGLX: Loaded and initialized r600
[    25.597] (II) GLX: Initialized DRI2 GL provider for screen 0
[    25.597] (II) RADEON(0): Setting screen physical size to 270 x 203
[    25.683] (II) config/udev: Adding input device Power Button 
(/dev/input/event7)
[    25.683] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    25.683] (II) LoadModule: "evdev"
[    25.684] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    25.689] (II) Module evdev: vendor="X.Org Foundation"
[    25.689] 	compiled for 1.18.4, module version = 2.10.3
[    25.689] 	Module class: X.Org XInput Driver
[    25.689] 	ABI class: X.Org XInput driver, version 22.1
[    25.689] (II) Using input driver 'evdev' for 'Power Button'
[    25.689] (**) Power Button: always reports core events
[    25.689] (**) evdev: Power Button: Device: "/dev/input/event7"
[    25.689] (--) evdev: Power Button: Vendor 0 Product 0x1
[    25.689] (--) evdev: Power Button: Found keys
[    25.689] (II) evdev: Power Button: Configuring as keyboard
[    25.689] (**) Option "config_info" 
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event7"
[    25.689] (II) XINPUT: Adding extended input device "Power Button" (type: 
KEYBOARD, id 6)
[    25.690] (**) Option "xkb_rules" "evdev"
[    25.691] (II) config/udev: Adding input device Video Bus 
(/dev/input/event5)
[    25.691] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    25.691] (II) Using input driver 'evdev' for 'Video Bus'
[    25.691] (**) Video Bus: always reports core events
[    25.691] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    25.691] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    25.691] (--) evdev: Video Bus: Found keys
[    25.691] (II) evdev: Video Bus: Configuring as keyboard
[    25.691] (**) Option "config_info" 
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input6/event5"
[    25.691] (II) XINPUT: Adding extended input device "Video Bus" (type: 
KEYBOARD, id 7)
[    25.691] (**) Option "xkb_rules" "evdev"
[    25.692] (II) config/udev: Adding input device Power Button 
(/dev/input/event6)
[    25.692] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    25.692] (II) Using input driver 'evdev' for 'Power Button'
[    25.692] (**) Power Button: always reports core events
[    25.692] (**) evdev: Power Button: Device: "/dev/input/event6"
[    25.692] (--) evdev: Power Button: Vendor 0 Product 0x1
[    25.692] (--) evdev: Power Button: Found keys
[    25.692] (II) evdev: Power Button: Configuring as keyboard
[    25.692] (**) Option "config_info" 
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7/event6"
[    25.692] (II) XINPUT: Adding extended input device "Power Button" (type: 
KEYBOARD, id 8)
[    25.692] (**) Option "xkb_rules" "evdev"
[    25.693] (II) config/udev: Adding input device Lid Switch 
(/dev/input/event4)
[    25.693] (II) No input driver specified, ignoring this device.
[    25.693] (II) This device may have been added with another device file.
[    25.693] (II) config/udev: Adding input device HD-Audio Generic 
HDMI/DP,pcm=3 (/dev/input/event10)
[    25.693] (II) No input driver specified, ignoring this device.
[    25.693] (II) This device may have been added with another device file.
[    25.694] (II) config/udev: Adding input device Logitech USB-PS/2 Optical 
Mouse (/dev/input/event1)
[    25.694] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev 
pointer catchall"
[    25.694] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical 
Mouse'
[    25.694] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[    25.694] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: 
"/dev/input/event1"
[    25.746] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 
0xc044
[    25.746] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse 
buttons
[    25.746] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll 
wheel(s)
[    25.746] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[    25.746] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y 
relative axes
[    25.746] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[    25.746] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel 
support
[    25.746] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: 
buttons 4 and 5
[    25.746] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 
4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    25.746] (**) Option "config_info" 
"udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C044.0001/input/input3/event1"
[    25.746] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 
Optical Mouse" (type: MOUSE, id 9)
[    25.746] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for 
relative axes.
[    25.747] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping 
acceleration scheme 1
[    25.747] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 
0
[    25.747] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration 
factor: 2.000
[    25.747] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration 
threshold: 4
[    25.748] (II) config/udev: Adding input device Logitech USB-PS/2 Optical 
Mouse (/dev/input/mouse0)
[    25.748] (II) No input driver specified, ignoring this device.
[    25.748] (II) This device may have been added with another device file.
[    25.748] (II) config/udev: Adding input device HDA Digital PCBeep 
(/dev/input/event11)
[    25.748] (II) No input driver specified, ignoring this device.
[    25.748] (II) This device may have been added with another device file.
[    25.749] (II) config/udev: Adding input device HD-Audio Generic Mic 
(/dev/input/event12)
[    25.749] (II) No input driver specified, ignoring this device.
[    25.749] (II) This device may have been added with another device file.
[    25.749] (II) config/udev: Adding input device HD-Audio Generic Front 
Headphone (/dev/input/event13)
[    25.749] (II) No input driver specified, ignoring this device.
[    25.749] (II) This device may have been added with another device file.
[    25.750] (II) config/udev: Adding input device AT Translated Set 2 keyboard 
(/dev/input/event0)
[    25.750] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev 
keyboard catchall"
[    25.750] (II) Using input driver 'evdev' for 'AT Translated Set 2 
keyboard'
[    25.750] (**) AT Translated Set 2 keyboard: always reports core events
[    25.750] (**) evdev: AT Translated Set 2 keyboard: Device: 
"/dev/input/event0"
[    25.750] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    25.750] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    25.750] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    25.750] (**) Option "config_info" 
"udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    25.750] (II) XINPUT: Adding extended input device "AT Translated Set 2 
keyboard" (type: KEYBOARD, id 10)
[    25.750] (**) Option "xkb_rules" "evdev"
[    25.751] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad 
(/dev/input/event2)
[    25.751] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev 
touchpad catchall"
[    25.751] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad 
catchall"
[    25.751] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default 
clickpad buttons"
[    25.751] (II) LoadModule: "synaptics"
[    25.752] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[    25.753] (II) Module synaptics: vendor="X.Org Foundation"
[    25.753] 	compiled for 1.18.4, module version = 1.8.3
[    25.753] 	Module class: X.Org XInput Driver
[    25.753] 	ABI class: X.Org XInput driver, version 22.1
[    25.753] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics 
TouchPad'
[    25.754] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    25.754] (**) Option "Device" "/dev/input/event2"
[    25.795] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events 
for semi-multitouch device
[    25.795] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 
5752 (res 51)
[    25.795] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 
4912 (res 84)
[    25.795] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 
255
[    25.795] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 
15
[    25.795] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right 
double triple
[    25.795] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 
0x7
[    25.795] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    25.795] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    25.808] (**) Option "config_info" 
"udev:/sys/devices/platform/i8042/serio1/input/input2/event2"
[    25.808] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics 
TouchPad" (type: TOUCHPAD, id 11)
[    25.808] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is 
now constant deceleration 2.5
[    25.808] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is 
now 1.75
[    25.808] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor 
is now 0.036
[    25.808] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration 
scheme 1
[    25.808] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    25.808] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 
2.000
[    25.809] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 
4
[    25.809] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    25.809] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad 
(/dev/input/mouse1)
[    25.809] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass 
"touchpad ignore duplicates"
[    25.810] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint 
(/dev/input/event3)
[    25.810] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer 
catchall"
[    25.810] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[    25.810] (**) TPPS/2 IBM TrackPoint: always reports core events
[    25.810] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event3"
[    25.810] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[    25.810] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[    25.810] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[    25.810] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[    25.810] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[    25.810] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[    25.810] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, 
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    25.810] (**) Option "config_info" 
"udev:/sys/devices/platform/i8042/serio1/serio2/input/input4/event3"
[    25.810] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" 
(type: MOUSE, id 12)
[    25.810] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[    25.810] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[    25.810] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[    25.811] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[    25.811] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[    25.811] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint 
(/dev/input/mouse2)
[    25.811] (II) No input driver specified, ignoring this device.
[    25.811] (II) This device may have been added with another device file.
[    25.811] (II) config/udev: Adding input device PC Speaker 
(/dev/input/event8)
[    25.811] (II) No input driver specified, ignoring this device.
[    25.811] (II) This device may have been added with another device file.
[    25.814] (II) config/udev: Adding input device ThinkPad Extra Buttons 
(/dev/input/event9)
[    25.814] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard 
catchall"
[    25.814] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[    25.814] (**) ThinkPad Extra Buttons: always reports core events
[    25.814] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event9"
[    25.814] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[    25.814] (--) evdev: ThinkPad Extra Buttons: Found keys
[    25.814] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[    25.814] (**) Option "config_info" 
"udev:/sys/devices/platform/thinkpad_acpi/input/input10/event9"
[    25.814] (II) XINPUT: Adding extended input device "ThinkPad Extra 
Buttons" (type: KEYBOARD, id 13)
[    25.814] (**) Option "xkb_rules" "evdev"
[    71.563] (II) AIGLX: Suspending AIGLX clients for VT switch
[   685.495] (II) evdev: ThinkPad Extra Buttons: Close
[   685.495] (II) UnloadModule: "evdev"
[   685.495] (II) evdev: TPPS/2 IBM TrackPoint: Close
[   685.495] (II) UnloadModule: "evdev"
[   685.495] (II) UnloadModule: "synaptics"
[   685.495] (II) evdev: AT Translated Set 2 keyboard: Close
[   685.495] (II) UnloadModule: "evdev"
[   685.495] (II) evdev: Logitech USB-PS/2 Optical Mouse: Close
[   685.495] (II) UnloadModule: "evdev"
[   685.496] (II) evdev: Power Button: Close
[   685.496] (II) UnloadModule: "evdev"
[   685.496] (II) evdev: Video Bus: Close
[   685.496] (II) UnloadModule: "evdev"
[   685.496] (II) evdev: Power Button: Close
[   685.496] (II) UnloadModule: "evdev"
[   685.498] (II) Server terminated successfully (0). Closing log file.



^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [gentoo-user-de] x (kde) start probleme
  2017-02-15 14:46   ` Sebastian
@ 2017-02-17 19:40     ` Sebastian
  2017-02-18 11:09       ` Randy Andy
  0 siblings, 1 reply; 10+ messages in thread
From: Sebastian @ 2017-02-17 19:40 UTC (permalink / raw
  To: Gentoo

Hallo,

hat den keiner eine Idee wie ich mit dem Problem weiterkomme?
Mittlerweile habe ich den sddm auf breeze umstellen können und einen 2 User 
testweise angelegt.
Leider bekomme ich wenn ich den sddm beim start automatisch starte diesen zwar 
zusehen aber die loginversuche werden abgelehnt. Wo bekomme ich zusehen warum 
diese abgelehnt werden?

Wenn ich ohne x starte kann ich mich anmelden und dann mit startx eine xterm 
starten aus dem ich dann mit startkde kdeplasma starten kann. Hier läuft dann 
auch alles zufriedenstellend lediglich der Desktophintergrund ist schwarz bzw 
wird von 3 xterm Fenstern bedeckt.

Gruß
Sebastian

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [gentoo-user-de] x (kde) start probleme
  2017-02-17 19:40     ` [gentoo-user-de] x (kde) " Sebastian
@ 2017-02-18 11:09       ` Randy Andy
  2017-03-03 14:29         ` Sebastian
  0 siblings, 1 reply; 10+ messages in thread
From: Randy Andy @ 2017-02-18 11:09 UTC (permalink / raw
  To: gentoo-user-de

[-- Attachment #1: Type: text/plain, Size: 796 bytes --]

Hi Sebastian,

Am Fri, 17 Feb 2017 20:40:49 +0100
schrieb Sebastian <selist@arcor.de>:

> Hallo,
> 
> hat den keiner eine Idee wie ich mit dem Problem weiterkomme?

Vielleicht doch, wegen dieser deiner Fehlermeldung:
[15:10:27.722] (WW) HELPER: [PAM] acctMgmt: Authentication failure

würde ich mal nativ auf der Maschine (nicht per cross oder chroot
compile) folgendes paket neu bauen:

sys-libs/pam


Ich hab ähnliche Probleme regelmäßig wenn ich System im 32-Bit chroot
für andere PCs update.

Vielleicht hilft das ja schon nach einem anschließenden Neustart, so
wie bei mir. ;-)

Ansonsten würde ich als nächstes in Richtung .Xauthority Rechte des
Xorg Systems recherchieren, war irgendwo in den tiefen der xorg wikis
erwähnt.

Gutes Gelingen,

Andy. 

[-- Attachment #2: Digitale Signatur von OpenPGP --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [gentoo-user-de] x (kde) start probleme
  2017-02-18 11:09       ` Randy Andy
@ 2017-03-03 14:29         ` Sebastian
  2017-03-03 15:46           ` Sven Eden
  2017-03-04 22:21           ` Michael Schier
  0 siblings, 2 replies; 10+ messages in thread
From: Sebastian @ 2017-03-03 14:29 UTC (permalink / raw
  To: gentoo-user-de

Hallo,

ich habe nochmal ein wenig gesucht und kann mich jetzt immerhin per startx an 
kde Anmelden ohne Umweg über xterm.

Nachvollziebar habe ich die /etc/X11/xinit/xinitrc bearbeitet. Leider habe ich 
dazu im Handbuch aber keine mich weiterführenden hinweise gefunden. Ich stelle 
die mal hier rein wie sie im Moment aussieht. Sollte ich da noch etwas 
verbessern?

-----------------------------------------------------------
#!/bin/sh

userresources=$HOME/.Xresources
usermodmap=$HOME/.Xmodmap
sysresources=/etc/X11/xinit/Xresources
sysmodmap=/etc/X11/xinit/Xmodmap

# merge in defaults and keymaps

if [ -f $sysresources ]; then

    xrdb -merge $sysresources

fi

if [ -f $sysmodmap ]; then
    xmodmap $sysmodmap
fi

if [ -f "$userresources" ]; then

    xrdb -merge "$userresources"

fi

if [ -f "$usermodmap" ]; then
    xmodmap "$usermodmap"
fi

# start some nice programs

if [ -n "`/etc/X11/chooser.sh`" ]; then
 command="`/etc/X11/chooser.sh`"
else
 failsafe="yes"
fi

if [ -d /etc/X11/xinit/xinitrc.d ] ; then
 for f in /etc/X11/xinit/xinitrc.d/?* ; do
  [ -x "$f" ] && . "$f"
 done
 unset f
fi

if [ -n "$failsafe" ]; then
 #twm &
 #xclock -geometry 50x50-1+1 &
 #xterm -geometry 80x50+494+51 &
 #xterm -geometry 80x20+494-0 &
 #exec xterm -geometry 80x66+0+0 -name login
 #exec startkde -geometry 80x66+0+0 -name login
#else
 exec startkde
fi
------------------------------------------------------------------------------

wofür stehen die twm, xclock und xterm angaben?

Leider ist der Anmeldebildschirm von sddm noch immer unbrauchbar eine 
Anmeldung schlägt immer fehl. Ich habe festgestellt das das Tastatur-Layout zu 
diesem Zeitpunkt warscheinlich noch Englisch ist? = = ) üöä sind nicht 
vorhanden.
Dies dürfte dem Passwort aber egal sein da im Moment auf einfach getrimmt.
Den sddm schalte in der /etc/conf.d/xdm an oder aus.

------------------------------------

# We always try and start X on a static VT. The various DMs normally default
# to using VT7. If you wish to use the xdm init script, then you should ensure
# that the VT checked is the same VT your DM wants to use. We do this check to
# ensure that you haven't accidentally configured something to run on the VT
# in your /etc/inittab file so that you don't get a dead keyboard.
CHECKVT=7

# What display manager do you use ?  [ xdm | gdm | kdm | gpe | entrance ]
# NOTE: If this is set in /etc/rc.conf, that setting will override this one.
#DISPLAYMANAGER="sddm"

---------------------------------------------------------------------------

Mit den Spracheinstellung hatte ich auch meine Probleme und vieleicht ist das 
noch nicht korrekt. Für Deutsch war kein erkennbares UTF8 Layout vorhanden so 
habe ich eines erstellt mit locale-gen (ohne recht zu verstehen was dabei 
genau passiert) und mit eselect gesetzt.

/etc/env.d/02locale sieht so aus:

# Configuration file for eselect
# This file has been automatically generated.
LANG="de_DE.utf8"
LC_CTYPE="de_DE.utf8"
LC_NUMERIC="de_DE.utf8"
LC_TIME="de_DE.utf8"
LC_COLLATE="C"
LC_MONETARY="de_DE.utf8"
LC_MESSAGES="de_DE.utf8"
LC_PAPER="de_DE.utf8"
LC_NAME="de_DE.utf8"
LC_ADDRESS="de_DE.utf8"
LC_TELEPHONE="de_DE.utf8"
LC_MEASUREMENT="de_DE.utf8"
LC_IDENTIFICATION="de_DE.utf8"
LC_ALL=""

Gruß
Sebastian

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [gentoo-user-de] x (kde) start probleme
  2017-03-03 14:29         ` Sebastian
@ 2017-03-03 15:46           ` Sven Eden
  2017-03-03 16:43             ` Sebastian
  2017-03-04 22:21           ` Michael Schier
  1 sibling, 1 reply; 10+ messages in thread
From: Sven Eden @ 2017-03-03 15:46 UTC (permalink / raw
  To: gentoo-user-de

[-- Attachment #1: Type: text/plain, Size: 1290 bytes --]

Am Freitag, 3. März 2017, 15:29:20 CET schrieb Sebastian:
> Mit den Spracheinstellung hatte ich auch meine Probleme und vieleicht ist
> das noch nicht korrekt. Für Deutsch war kein erkennbares UTF8 Layout
> vorhanden so habe ich eines erstellt mit locale-gen (ohne recht zu
> verstehen was dabei genau passiert) und mit eselect gesetzt.

Das sieht auch gut aus.

Und was steht in /etc/conf.d/keymaps?

Bei mir steht:

 ~ $ grep "^[^#]" /etc/conf.d/keymaps 
keymap="de-latin1"
windowkeys="YES"
extended_keymaps=""
dumpkeys_charset=""
fix_euro="NO"

Da braucht man allerdings noch einen UTF-8 Font für die Konsole:

 ~ $ grep "^[^#]" /etc/conf.d/consolefont 
consolefont="lat9w-10"
consoletranslation="8859-15_to_uni"
unicodemap="lat9w"

(Hinweis: lat9w-10 ist recht klein.)

Damit bei mir alles rund läuft, habe ich mir eine generelle Konfiguration für X 
gebaut, die allerdings nicht auf meinem Mist gewachsen ist:

 ~ $ cat /etc/X11/xorg.conf.d/00-keyboard.conf 
Section "InputClass" 
        Identifier  "keyboard-all_de" 
        Driver      "evdev" 
        Option      "XkbLayout"  "de" 
        Option      "XkbOptions" "compose:rwin altwin:meta_alt"
        MatchIsKeyboard "on" 
EndSection


Vielleicht hilft dir das etwas.

Gruß

Sven

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [gentoo-user-de] x (kde) start probleme
  2017-03-03 15:46           ` Sven Eden
@ 2017-03-03 16:43             ` Sebastian
  0 siblings, 0 replies; 10+ messages in thread
From: Sebastian @ 2017-03-03 16:43 UTC (permalink / raw
  To: gentoo-user-de

Am Freitag, 3. März 2017, 16:46:56 schrieb Sven Eden:
> Am Freitag, 3. März 2017, 15:29:20 CET schrieb Sebastian:
> > Mit den Spracheinstellung hatte ich auch meine Probleme und vieleicht ist
> > das noch nicht korrekt. Für Deutsch war kein erkennbares UTF8 Layout
> > vorhanden so habe ich eines erstellt mit locale-gen (ohne recht zu
> > verstehen was dabei genau passiert) und mit eselect gesetzt.
> 
> Das sieht auch gut aus.
> 
> Und was steht in /etc/conf.d/keymaps?

# Use keymap to specify the default console keymap.  There is a complete tree
# of keymaps in /usr/share/keymaps to choose from.
keymap="de"

# Should we first load the 'windowkeys' console keymap?  Most x86 users will
# say "yes" here.  Note that non-x86 users should leave it as "no".
# Loading this keymap will enable VT switching (like ALT+Left/Right)
# using the special windows keys on the linux console.
windowkeys="YES"

# The maps to load for extended keyboards.  Most users will leave this as is.
extended_keymaps=""
#extended_keymaps="backspace keypad euro2"

# Tell dumpkeys(1) to interpret character action codes to be
# from the specified character set.
# This only matters if you set unicode="yes" in /etc/rc.conf.
# For a list of valid sets, run `dumpkeys --help`
dumpkeys_charset=""

# Some fonts map AltGr-E to the currency symbol instead of the Euro.
# To fix this, set to "yes"
fix_euro="yes"

> 
> Bei mir steht:
> 
>  ~ $ grep "^[^#]" /etc/conf.d/keymaps
> keymap="de-latin1"
> windowkeys="YES"
> extended_keymaps=""
> dumpkeys_charset=""
> fix_euro="NO"
> 
> Da braucht man allerdings noch einen UTF-8 Font für die Konsole:
> 
>  ~ $ grep "^[^#]" /etc/conf.d/consolefont
> consolefont="lat9w-10"
> consoletranslation="8859-15_to_uni"
> unicodemap="lat9w"

consolefont="default8x16"

> 
> (Hinweis: lat9w-10 ist recht klein.)
> 
> Damit bei mir alles rund läuft, habe ich mir eine generelle Konfiguration
> für X gebaut, die allerdings nicht auf meinem Mist gewachsen ist:
> 
>  ~ $ cat /etc/X11/xorg.conf.d/00-keyboard.conf
> Section "InputClass"
>         Identifier  "keyboard-all_de"
>         Driver      "evdev"
>         Option      "XkbLayout"  "de"
>         Option      "XkbOptions" "compose:rwin altwin:meta_alt"
>         MatchIsKeyboard "on"
> EndSection

Danke da werde ich mal experimentieren.

Gruß
Sebastian

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [gentoo-user-de] x (kde) start probleme
  2017-03-03 14:29         ` Sebastian
  2017-03-03 15:46           ` Sven Eden
@ 2017-03-04 22:21           ` Michael Schier
  1 sibling, 0 replies; 10+ messages in thread
From: Michael Schier @ 2017-03-04 22:21 UTC (permalink / raw
  To: gentoo-user-de

[-- Attachment #1: Type: text/plain, Size: 3425 bytes --]

Hallo Sebastian,
ich versuche mal eine Antwort auf deine Frage "wofür stehen die twm, xclock 
und xterm angaben?"
Kurz nach der Zeile "> # start some nice programs" kommt ja die Abfrage auf 
ein Script "chooser.sh". Ich denke hier geht es um die Bestimmung einer 
Xsession und insbesondere den Window-manager.
Wenn das Script fehlt schlägt, dann braucht man einen Standard, der immer geht 
bzw. von dem man annehmen kann, dass er immer geht.
Das ist der Teil, der in deiner xinitrc weiter unten dann auskommentiert ist. 
Die Zilen ab "> if [ -n "$failsafe" ]; then" würden den einfachen Window-
Manager twm (siehe Wikipedia https://de.wikipedia.org/wiki/Twm ) starten und 
zusätzlich noch eine Uhr und zwei xterm. Die-geometry Angabe sind, soweit ich 
mich erinnere, Angaben für die Position+Größe auf dem Bildschirm.
Woher die Zeile mit "exec startkde" im "then"-Zweig kommt, kann ich nicht 
erklären. Ist das vielleicht ein Versuch von dir gewesen?

Zur Lösung deines eigentlichen Problems kann ich leider keinen konkreten Tipp 
geben. Ich kann nur sagen, dass bei mir SDDM geht und ich mich damit anmelden 
kann und dann ein Window-Manager startet. Das ist normalerweise KDE (Plasma), 
aber ich hatte kürzlich auch mal spasseshalber Mate gebaut und konnte das dann 
im SDDM auch als Sitzung auswählen und mich anmelden. Einstellungen nach dem 
Bauen waren dafür keine nötig.
Meine sddm.conf habe ich als Anhang an die Mail gehängt. Aber an der habe ich 
nichts gemacht, sie ist so wie emerge sie eingebaut hat.

Viel Erfolg weiterhin.

Viele Grüße
Michael



Am Freitag, 3. März 2017, 15:29:20 schrieb Sebastian:
> Hallo,
> 
> ich habe nochmal ein wenig gesucht und kann mich jetzt immerhin per startx
> an kde Anmelden ohne Umweg über xterm.
> 
> Nachvollziebar habe ich die /etc/X11/xinit/xinitrc bearbeitet. Leider habe
> ich dazu im Handbuch aber keine mich weiterführenden hinweise gefunden. Ich
> stelle die mal hier rein wie sie im Moment aussieht. Sollte ich da noch
> etwas verbessern?
> 
> -----------------------------------------------------------
> #!/bin/sh
> 
> userresources=$HOME/.Xresources
> usermodmap=$HOME/.Xmodmap
> sysresources=/etc/X11/xinit/Xresources
> sysmodmap=/etc/X11/xinit/Xmodmap
> 
> # merge in defaults and keymaps
> 
> if [ -f $sysresources ]; then
> 
> 
> 
> 
> 
> 
> 
>     xrdb -merge $sysresources
> 
> fi
> 
> if [ -f $sysmodmap ]; then
>     xmodmap $sysmodmap
> fi
> 
> if [ -f "$userresources" ]; then
> 
> 
> 
> 
> 
> 
> 
>     xrdb -merge "$userresources"
> 
> fi
> 
> if [ -f "$usermodmap" ]; then
>     xmodmap "$usermodmap"
> fi
> 
> # start some nice programs
> 
> if [ -n "`/etc/X11/chooser.sh`" ]; then
>  command="`/etc/X11/chooser.sh`"
> else
>  failsafe="yes"
> fi
> 
> if [ -d /etc/X11/xinit/xinitrc.d ] ; then
>  for f in /etc/X11/xinit/xinitrc.d/?* ; do
>   [ -x "$f" ] && . "$f"
>  done
>  unset f
> fi
> 
> if [ -n "$failsafe" ]; then
>  #twm &
>  #xclock -geometry 50x50-1+1 &
>  #xterm -geometry 80x50+494+51 &
>  #xterm -geometry 80x20+494-0 &
>  #exec xterm -geometry 80x66+0+0 -name login
>  #exec startkde -geometry 80x66+0+0 -name login
> #else
>  exec startkde
> fi
> ----------------------------------------------------------------------------
> --
> 
> wofür stehen die twm, xclock und xterm angaben?
[...]
-- 
Mit Gentoo Linux gesendet

[-- Attachment #2: sddm.conf --]
[-- Type: text/plain, Size: 2706 bytes --]

[Autologin]
# Whether sddm should automatically log back into sessions when they exit
Relogin=false

# Name of session file for autologin session
Session=

# Username for autologin session
User=


[General]
# Halt command
HaltCommand=/sbin/shutdown -h -P now

# Input method module
InputMethod=

# Initial NumLock state. Can be on, off or none.
# If property is set to none, numlock won't be changed
# NOTE: Currently ignored if autologin is enabled.
Numlock=none

# Reboot command
RebootCommand=/sbin/shutdown -r now


[Theme]
# Current theme name
Current=elarun

# Cursor theme used in the greeter
CursorTheme=Adwaita

# Number of users to use as threshold
# above which avatars are disabled
# unless explicitly enabled with EnableAvatars
DisableAvatarsThreshold=7

# Enable display of custom user avatars
EnableAvatars=true

# Global directory for user avatars
# The files should be named <username>.face.icon
FacesDir=/usr/share/sddm/faces

# Theme directory path
ThemeDir=/usr/share/sddm/themes


[Users]
# Default $PATH for logged in users
DefaultPath=/bin:/usr/bin:/usr/local/bin

# Comma-separated list of shells.
# Users with these shells as their default won't be listed
HideShells=

# Comma-separated list of users that should not be listed
HideUsers=

# Maximum user id for displayed users
MaximumUid=60000

# Minimum user id for displayed users
MinimumUid=1000

# Remember the session of the last successfully logged in user
RememberLastSession=true

# Remember the last successfully logged in user
RememberLastUser=true


[Wayland]
# Path to a script to execute when starting the desktop session
SessionCommand=/usr/share/sddm/scripts/wayland-session

# Directory containing available Wayland sessions
SessionDir=/usr/share/wayland-sessions

# Path to the user session log file
SessionLogFile=.local/share/sddm/wayland-session.log


[X11]
# Path to a script to execute when starting the display server
DisplayCommand=/usr/share/sddm/scripts/Xsetup

# Path to a script to execute when stopping the display server
DisplayStopCommand=/usr/share/sddm/scripts/Xstop

# The lowest virtual terminal number that will be used.
MinimumVT=7

# Arguments passed to the X server invocation
ServerArguments=-nolisten tcp

# Path to X server binary
ServerPath=/usr/bin/X

# Path to a script to execute when starting the desktop session
SessionCommand=/usr/share/sddm/scripts/Xsession

# Directory containing available X sessions
SessionDir=/usr/share/xsessions

# Path to the user session log file
SessionLogFile=.local/share/sddm/xorg-session.log

# Path to the Xauthority file
UserAuthFile=.Xauthority

# Path to xauth binary
XauthPath=/usr/bin/xauth

# Path to Xephyr binary
XephyrPath=/usr/bin/Xephyr



^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2017-03-04 22:21 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-02-14 17:22 [gentoo-user-de] X start probleme Sebastian
2017-02-14 17:37 ` Harald Weiner
2017-02-15 13:58   ` Sebastian
2017-02-15 14:46   ` Sebastian
2017-02-17 19:40     ` [gentoo-user-de] x (kde) " Sebastian
2017-02-18 11:09       ` Randy Andy
2017-03-03 14:29         ` Sebastian
2017-03-03 15:46           ` Sven Eden
2017-03-03 16:43             ` Sebastian
2017-03-04 22:21           ` Michael Schier

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox