On Tue, 13 Nov 2007 22:27:52 +0100 Till Schwalbe <gentoo@cumulum.de>
wrote:
>
>Und was hat das Ganze jetzt mit iwl und kismet zu tun?
>
>

Oh, verdammt, da dachte ich wohl, wenn ich das "Subject" ändere, kann
ich auch eine Nachricht mittels Antworten erstellen.
Immerhin habe ich mal nen Blick af Message-header
geworfen...naja vorher wusste ich nichts von "replay-to:".

Ansonsten ist dies natürlich auch meine Entschuldigung für den
"eingefügten" Beitrag im "iwl und kismet".

> Hallo,
> 
> Seit längerer Zeit plagt mich das Problem, dass mein einer
> USB-Port (Bus 5) stockend arbeitet. Egal, was für eine Peripherie ich
> dran hab'. Unter Windows kann ich das Phänomen, genauso wie an dem
> zweiten Port (Bus 4), nicht beobachten. Damit schließe ich einen
> Defekt der Hardware aus.
> Das "stocken" kommt meistens erst nach einiger Zeit, setzt manchmal
> wieder aus, usw. :
> 
> # lsusb
> Bus 001 Device 001: ID 0000:0000  
> Bus 005 Device 002: ID 046d:c016 Logitech, Inc. M-UV69a Optical Wheel
> Mouse 
> Bus 005 Device 001: ID 0000:0000  
> Bus 004 Device 002: ID 0ccd:0013 TerraTec Electronic GmbH 
> Bus 004 Device 001: ID 0000:0000  
> Bus 003 Device 001: ID 0000:0000  
> Bus 002 Device 001: ID 0000:0000  
> 
> #dmesg Zeigt nichts an Veränderungen an
> 
> (Weitere Ausgaben weiter unten)
> 
> Ich hoffe, ihr könnt mir zur weiteren Fehleranalyse, oder -bewältigung
> behilflich sein.
> 
> MfG, 
> Jan
> 
> 
> 
> 
> 
> 
> #lspci (gekürzt)
> 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
> UHCI Controller #1 (rev 02) (prog-if 00 [UHCI]) Subsystem: Fujitsu
> Siemens Computer GmbH Unknown device 10b0 Flags: bus master, medium
> devsel, latency 0, IRQ 5 I/O ports at 1800 [size=32]
> 
> 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
> UHCI Controller #2 (rev 02) (prog-if 00 [UHCI]) Subsystem: Fujitsu
> Siemens Computer GmbH Unknown device 10b0 Flags: bus master, medium
> devsel, latency 0, IRQ 11 I/O ports at 1820 [size=32]
> 
> 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
> UHCI Controller #3 (rev 02) (prog-if 00 [UHCI]) Subsystem: Fujitsu
> Siemens Computer GmbH Unknown device 10b0 Flags: bus master, medium
> devsel, latency 0, IRQ 3 I/O ports at 1840 [size=32]
> 
> 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
> UHCI Controller #4 (rev 02) (prog-if 00 [UHCI]) Subsystem: Fujitsu
> Siemens Computer GmbH Unknown device 10b0 Flags: bus master, medium
> devsel, latency 0, IRQ 10 I/O ports at 1860 [size=32]
> 
> 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2
> EHCI Controller (rev 02) (prog-if 20 [EHCI]) Subsystem: Fujitsu
> Siemens Computer GmbH Unknown device 10b0 Flags: bus master, medium
> devsel, latency 0, IRQ 5 Memory at b0004000 (32-bit,
> non-prefetchable) [size=1K] Capabilities: [50] Power Management
> version 2 Capabilities: [58] Debug port
> 
> 
> #lsusb -v (vom Bus 005)
> Bus 005 Device 002: ID 046d:c016 Logitech, Inc. M-UV69a Optical Wheel
> Mouse Device Descriptor:
>   bLength                18
>   bDescriptorType         1
>   bcdUSB               2.00
>   bDeviceClass            0 (Defined at Interface level)
>   bDeviceSubClass         0 
>   bDeviceProtocol         0 
>   bMaxPacketSize0         8
>   idVendor           0x046d Logitech, Inc.
>   idProduct          0xc016 M-UV69a Optical Wheel Mouse
>   bcdDevice            3.40
>   iManufacturer           1 Logitech
>   iProduct                2 Optical USB Mouse
>   iSerial                 0 
>   bNumConfigurations      1
>   Configuration Descriptor:
>     bLength                 9
>     bDescriptorType         2
>     wTotalLength           34
>     bNumInterfaces          1
>     bConfigurationValue     1
>     iConfiguration          0 
>     bmAttributes         0xa0
>       (Bus Powered)
>       Remote Wakeup
>     MaxPower              100mA
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        0
>       bAlternateSetting       0
>       bNumEndpoints           1
>       bInterfaceClass         3 Human Interface Devices
>       bInterfaceSubClass      1 Boot Interface Subclass
>       bInterfaceProtocol      2 Mouse
>       iInterface              0 
>         HID Device Descriptor:
>           bLength                 9
>           bDescriptorType        33
>           bcdHID               1.10
>           bCountryCode            0 Not supported
>           bNumDescriptors         1
>           bDescriptorType        34 Report
>           wDescriptorLength      52
>          Report Descriptors: 
>            ** UNAVAILABLE **
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x81  EP 1 IN
>         bmAttributes            3
>           Transfer Type            Interrupt
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0004  1x 4 bytes
>         bInterval              10
> Device Status:     0x0000
>   (Bus Powered)
> 
> Bus 005 Device 001: ID 0000:0000  
> Device Descriptor:
>   bLength                18
>   bDescriptorType         1
>   bcdUSB               1.10
>   bDeviceClass            9 Hub
>   bDeviceSubClass         0 Unused
>   bDeviceProtocol         0 
>   bMaxPacketSize0        64
>   idVendor           0x0000 
>   idProduct          0x0000 
>   bcdDevice            2.06
>   iManufacturer           3 Linux 2.6.22-gentoo-r9 uhci_hcd
>   iProduct                2 UHCI Host Controller
>   iSerial                 1 0000:00:1d.3
>   bNumConfigurations      1
>   Configuration Descriptor:
>     bLength                 9
>     bDescriptorType         2
>     wTotalLength           25
>     bNumInterfaces          1
>     bConfigurationValue     1
>     iConfiguration          0 
>     bmAttributes         0xe0
>       Self Powered
>       Remote Wakeup
>     MaxPower                0mA
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        0
>       bAlternateSetting       0
>       bNumEndpoints           1
>       bInterfaceClass         9 Hub
>       bInterfaceSubClass      0 Unused
>       bInterfaceProtocol      0 
>       iInterface              0 
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x81  EP 1 IN
>         bmAttributes            3
>           Transfer Type            Interrupt
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0002  1x 2 bytes
>         bInterval             255
> Hub Descriptor:
>   bLength               9
>   bDescriptorType      41
>   nNbrPorts             2
>   wHubCharacteristic 0x000a
>     No power switching (usb 1.0)
>     Per-port overcurrent protection
>   bPwrOn2PwrGood        1 * 2 milli seconds
>   bHubContrCurrent      0 milli Ampere
>   DeviceRemovable    0x00
>   PortPwrCtrlMask    0xff
>  Hub Port Status:
>    Port 1: 0000.0303 lowspeed power enable connect
>    Port 2: 0000.0100 power
> Device Status:     0x0003
>   Self Powered
>   Remote Wakeup Enabled
> 
> 
> Kernel-Config:
> # cat .config | egrep "HID|USB"
> # USB Network Adapters
> # CONFIG_USB_CATC is not set
> # CONFIG_USB_KAWETH is not set
> # CONFIG_USB_PEGASUS is not set
> # CONFIG_USB_RTL8150 is not set
> # CONFIG_USB_USBNET_MII is not set
> # CONFIG_USB_USBNET is not set
> # USB-based Watchdog Cards
> # CONFIG_USBPCWATCHDOG is not set
> # CONFIG_I2C_TINY_USB is not set
> CONFIG_V4L_USB_DRIVERS=y
> # CONFIG_VIDEO_PVRUSB2 is not set
> # CONFIG_VIDEO_USBVISION is not set
> # CONFIG_USB_VICAM is not set
> # CONFIG_USB_IBMCAM is not set
> # CONFIG_USB_KONICAWC is not set
> # CONFIG_USB_QUICKCAM_MESSENGER is not set
> # CONFIG_USB_ET61X251 is not set
> # CONFIG_USB_W9968CF is not set
> # CONFIG_USB_OV511 is not set
> # CONFIG_USB_SE401 is not set
> # CONFIG_USB_SN9C102 is not set
> # CONFIG_USB_STV680 is not set
> # CONFIG_USB_ZC0301 is not set
> # CONFIG_USB_PWC is not set
> # CONFIG_USB_ZR364XX is not set
> # CONFIG_USB_DSBR is not set
> # Supported USB Adapters
> # CONFIG_DVB_USB is not set
> # CONFIG_DVB_TTUSB_BUDGET is not set
> # CONFIG_DVB_TTUSB_DEC is not set
> # USB devices
> CONFIG_SND_USB_AUDIO=m
> # CONFIG_SND_USB_USX2Y is not set
> # CONFIG_SND_USB_CAIAQ is not set
> # HID Devices
> CONFIG_HID=y
> # CONFIG_HID_DEBUG is not set
> # USB Input Devices
> CONFIG_USB_HID=y
> CONFIG_USB_HIDINPUT_POWERBOOK=y
> CONFIG_HID_FF=y
> CONFIG_HID_PID=y
> CONFIG_USB_HIDDEV=y
> # USB support
> CONFIG_USB_ARCH_HAS_HCD=y
> CONFIG_USB_ARCH_HAS_OHCI=y
> CONFIG_USB_ARCH_HAS_EHCI=y
> CONFIG_USB=y
> # CONFIG_USB_DEBUG is not set
> # Miscellaneous USB options
> CONFIG_USB_DEVICEFS=y
> # CONFIG_USB_DEVICE_CLASS is not set
> # CONFIG_USB_DYNAMIC_MINORS is not set
> # CONFIG_USB_SUSPEND is not set
> # CONFIG_USB_OTG is not set
> # USB Host Controller Drivers
> CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_EHCI_SPLIT_ISO=y
> CONFIG_USB_EHCI_ROOT_HUB_TT=y
> CONFIG_USB_EHCI_TT_NEWSCHED=y
> # CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
> # CONFIG_USB_ISP116X_HCD is not set
> # CONFIG_USB_OHCI_HCD is not set
> CONFIG_USB_UHCI_HCD=y
> # CONFIG_USB_SL811_HCD is not set
> # USB Device Class drivers
> # CONFIG_USB_ACM is not set
> # CONFIG_USB_PRINTER is not set
> # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
> # may also be needed; see USB_STORAGE Help for more information
> CONFIG_USB_STORAGE=y
> # CONFIG_USB_STORAGE_DEBUG is not set
> CONFIG_USB_STORAGE_DATAFAB=y
> CONFIG_USB_STORAGE_FREECOM=y
> CONFIG_USB_STORAGE_ISD200=y
> CONFIG_USB_STORAGE_DPCM=y
> CONFIG_USB_STORAGE_USBAT=y
> # CONFIG_USB_STORAGE_SDDR09 is not set
> # CONFIG_USB_STORAGE_SDDR55 is not set
> # CONFIG_USB_STORAGE_JUMPSHOT is not set
> # CONFIG_USB_STORAGE_ALAUDA is not set
> # CONFIG_USB_STORAGE_KARMA is not set
> # CONFIG_USB_LIBUSUAL is not set
> # USB Imaging devices
> # CONFIG_USB_MDC800 is not set
> # CONFIG_USB_MICROTEK is not set
> CONFIG_USB_MON=y
> # USB port drivers
> # CONFIG_USB_USS720 is not set
> # USB Serial Converter support
> # CONFIG_USB_SERIAL is not set
> # USB Miscellaneous drivers
> # CONFIG_USB_EMI62 is not set
> # CONFIG_USB_EMI26 is not set
> # CONFIG_USB_ADUTUX is not set
> # CONFIG_USB_AUERSWALD is not set
> # CONFIG_USB_RIO500 is not set
> # CONFIG_USB_LEGOTOWER is not set
> # CONFIG_USB_LCD is not set
> # CONFIG_USB_BERRY_CHARGE is not set
> # CONFIG_USB_LED is not set
> # CONFIG_USB_CYPRESS_CY7C63 is not set
> # CONFIG_USB_CYTHERM is not set
> # CONFIG_USB_PHIDGET is not set
> # CONFIG_USB_IDMOUSE is not set
> # CONFIG_USB_FTDI_ELAN is not set
> # CONFIG_USB_APPLEDISPLAY is not set
> # CONFIG_USB_SISUSBVGA is not set
> # CONFIG_USB_LD is not set
> # CONFIG_USB_TRANCEVIBRATOR is not set
> # CONFIG_USB_IOWARRIOR is not set
> # CONFIG_USB_TEST is not set
> # USB DSL modem support
> # USB Gadget Support
> # CONFIG_USB_GADGET is not set