Re: [gentoo-user-de] Primäres Display für TwinView

Re: [gentoo-user-de] Primäres Display für TwinView

[Martin Brauns]

Werner Jansen schrieb:

>Hallo alle!
>
>Mit hilfe des Readme-Files im nvidia-kernel Paket hab ich es in
>kürzester Zeit geschafft, beide zum Rennen zu bringen mit TwinView.
>
>Was mich jetzt aber nervt, ist die Tatsache, daß ich es noch nicht
>geschafft habe, das Primäre Display auf den richtigen Monitor zu
>bekommen. Mir ist klar, daß ich mit "RightOf" usw. die Dinger anordnen
>kann ... aber ich will, daß er den, der am DVI hängt als "Primary"
>nimmt. D.h. dort den GDM darstellt und so Zeugs.
>
>Grafikkarte ist ne NVIDIA 5900FX.
>
>
>  
>
Hallo,
ich hatte das (glaub ich, is schon länger her) mit
 Option "ConnectedMonitor"         "DFP-0,CRT-1"
hinbekommen.
du hast ja anscheinend am VGA nen TFT hängen
keine Ahnung ob er das dann mit DFP-1 richtig zuordnet

Gruß
Martin

>
>Vielen Dank für Hilfe :)
>
>CU
>Werner
>
>  
>

-- 
gentoo-user-de@gentoo.org mailing list

[gentoo-user-de] emerge gelöscht nach "emerge -Davu system"

[Florian Wallburg]

nach einem emerge -Davu system
###
[portage-2.0.51.22-r2] bash: line 1: /usr/lib/portage/bin/ebuild.sh: No 
such file or directory
!!! FAILED postrm: 127
dual root # emerge -Davu system
-bash: /usr/bin/emerge: No such file or directory
###
hilfe ich brauche mein emerge wieder!
-- 
gentoo-user-de@gentoo.org mailing list

Re: [gentoo-user-de] emerge gelöscht nach "emerge -Davu system"

[Christian Dröge]

[-- Attachment #1: Type: text/plain, Size: 620 bytes --]

Am Samstag, den 20.08.2005, 19:18 +0200 schrieb Florian Wallburg:
> nach einem emerge -Davu system
> ###
> [portage-2.0.51.22-r2] bash: line 1: /usr/lib/portage/bin/ebuild.sh: No 
> such file or directory
> !!! FAILED postrm: 127
> dual root # emerge -Davu system
> -bash: /usr/bin/emerge: No such file or directory
> ###
> hilfe ich brauche mein emerge wieder!

Gibt es vielleicht noch /usr/lib/portage/bin/emerge? Wenn ja, dann
kannst du einfach nochmal versuchen portage zu emergen oder sonst
müsstest du ein Portage Rescue
ausführen: /usr/portage/sys-apps/portage/files/README.RESCUE


Christian

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

[gentoo-user-de] Primäres Display für TwinView

[Werner Jansen]

Hallo alle!

Mit hilfe des Readme-Files im nvidia-kernel Paket hab ich es in
kürzester Zeit geschafft, beide zum Rennen zu bringen mit TwinView.

Was mich jetzt aber nervt, ist die Tatsache, daß ich es noch nicht
geschafft habe, das Primäre Display auf den richtigen Monitor zu
bekommen. Mir ist klar, daß ich mit "RightOf" usw. die Dinger anordnen
kann ... aber ich will, daß er den, der am DVI hängt als "Primary"
nimmt. D.h. dort den GDM darstellt und so Zeugs.

Grafikkarte ist ne NVIDIA 5900FX.

Hier noch meine xorg.conf:

# File generated by xorgconfig.

#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person
obtaining a # copy of this software and associated documentation files
(the "Software"), # to deal in the Software without restriction,
including without limitation # the rights to use, copy, modify, merge,
publish, distribute, sublicense, # and/or sell copies of the Software,
and to permit persons to whom the # Software is furnished to do so,
subject to the following conditions: # 
# The above copyright notice and this permission notice shall be
included in # all copies or substantial portions of the Software.
# 
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT.  IN NO EVENT SHALL # The X.Org Foundation BE LIABLE
FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF
CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION
WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE.
# 
# Except as contained in this notice, the name of The X.Org Foundation
shall # not be used in advertising or otherwise to promote the sale,
use or other # dealings in this Software without prior written
authorization from # The X.Org Foundation.
#

#
**********************************************************************
# Refer to the xorg.conf(5x) man page for details about the format of 
# this file.
#
**********************************************************************

#
**********************************************************************
# Module section -- this  section  is used to specify # which
dynamically loadable modules to load. #
**********************************************************************
# Section "Module"

# This loads the DBE extension module.

    Load        "dbe"  	# Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA
extension    EndSubSection

# This loads the font modules
    Load        "type1"
#    Load        "speedo"
    Load        "freetype"
#    Load        "xtt"

# This loads the GLX module
    Load       "glx"
# This loads the DRI module
#    Load       "dri"

EndSection

#
**********************************************************************
# Files section.  This allows default font and rgb paths to be set #
**********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated
together), # as well as specifying multiple comma-separated entries in
one FontPath # command (or a combination of both methods)
# 
# 

    FontPath   "/usr/share/fonts/misc/"
    FontPath   "/usr/share/fonts/TTF/"
    FontPath   "/usr/share/fonts/Type1/"
#    FontPath   "/usr/share/fonts/CID/"
    FontPath   "/usr/share/fonts/75dpi/"
    FontPath   "/usr/share/fonts/75dpi/:unscaled"
    FontPath   "/usr/share/fonts/100dpi/"
    FontPath   "/usr/share/fonts/100dpi/:unscaled"
    FontPath   "/usr/share/fonts/local/"
#    FontPath   "/usr/share/fonts/Speedo/"
#    FontPath   "/usr/share/fonts/TrueType/"
#    FontPath   "/usr/share/fonts/freefont/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

#
**********************************************************************
# Server flags section. #
**********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode
switching # sequences.  This allows clients to receive these key
events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client. 

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings. 

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

#
**********************************************************************
# Input devices #
**********************************************************************

#
**********************************************************************
# Core keyboard's InputDevice section #
**********************************************************************

Section "InputDevice"

    Identifier	"LogitechCordlessDesktop"
    Driver	"kbd"

# For most OSs the protocol can be omitted (it defaults to
"Standard"). # When using XQUEUE (only for SVR3 and SVR4, but not
Solaris), # uncomment the following line.

#    Option     "Protocol"      "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with
xset(1)) #    Option	"Xleds"      "1 2 3"

#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"

# These are the default XKB settings for Xorg
#    Option "XkbRules"    "xorg"
#    Option "XkbModel"    "pc101"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""

#    Option "XkbDisable"

    Option "XkbRules"	"xorg"
    Option "XkbModel"	"logicdo"
    Option "XkbLayout"	"de"
    Option "XkbVariant" "nodeadkeys"

EndSection


#
**********************************************************************
# Core Pointer's InputDevice section #
**********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier	"LogitechMX500"
    Driver	"mouse"
    Option "Protocol"    "IMPS/2"
    Option "Device"      "/dev/mouse"
    Option "ZAxisMapping" "4 5"

# Mouse-speed setting for PS/2 mouse.

#    Option "Resolution"	"256"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"	"Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"	"9600"
#    Option "SampleRate"	"150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


#
**********************************************************************
# Other input device sections  # this is optional and is required only
if you # are using extended input devices.  This is for example only. 
Refer # to the xorg.conf man page for a description of the options.
#
**********************************************************************
# # Section "InputDevice" 
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

#
**********************************************************************
# Monitor section #
**********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "Iiyama Vision Master 400"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31.5-95.0

#    HorizSync	30-64         # multisync
#    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 60

EndSection


#
**********************************************************************
# Graphics device section #
**********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier	"Standard VGA"
    VendorName	"Unknown"
    BoardName	"Unknown"

# The chipset line is optional in most cases.  It can be used to
override # the driver's chipset detection, and should not normally be
specified.

#    Chipset	"generic"

# The Driver line must be present.  When using run-time loadable
driver # modules, this line instructs the server to load the specified
driver # module.  Even when not using loadable driver modules, this
line # indicates which driver should interpret the information in this
section.

    Driver     "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a
device # section can only match up with the primary video device.  For
PCI # devices a line like the following could be used.  This line
should not # normally be included unless there is more than one video
device # intalled.

#    BusID      "PCI:0:10:0"

#    VideoRam	256

#    Clocks	25.2 28.3

EndSection

# Device configured by xorgconfig:

Section "Device"
    Identifier  "GeForce 5900XT"
    Driver      "nvidia"
    #VideoRam    131072
    # Insert Clocks lines here if appropriate
    Option "NoLogo" "true"
####    Option "ConnectedMonitor" "DFP, DFP"
    Option "TwinView" "on"
    Option "TwinViewOrientation" "RightOf"
    Option "SecondMonitorHoizSync" "75-90"
    Option "SecondMonitorVertRefresh" "60"
    Option "MetaModes" "1280x1024,1280x1024"
EndSection


#
**********************************************************************
# Screen sections #
**********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen
section # may be specified from the X server command line with the
"-screen" # option.
Section "Screen"
    Identifier  "Screen 1"
    Device      "GeForce 5900XT"
    Monitor     "Iiyama Vision Master 400"
    DefaultDepth 24

    Subsection "Display"
        Depth       8
        Modes       "1280x1024"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x1024"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1280x1024"
        ViewPort    0 0
    EndSubsection
EndSection

#
**********************************************************************
# ServerLayout sections. #
**********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is
used. # When now ServerLayout section is present, the first Screen
section # is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and
right # of the primary screen.  In this example, screen 2 is located
to the # right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "LogitechMX500" "CorePointer"
    InputDevice "LogitechCordlessDesktop" "CoreKeyboard"

EndSection

# Section "DRI"
#    Mode 0666
# EndSection



Vielen Dank für Hilfe :)

CU
Werner

-- 
gentoo-user-de@gentoo.org mailing list

Re: [gentoo-user-de] Primäres Display für TwinView

[Werner Jansen]

On Sat, 20 Aug 2005 18:48:43 +0200
Martin Brauns <majabrauns@web.de> wrote:

> Werner Jansen schrieb:
> 
> >Hallo alle!
> >
> >Mit hilfe des Readme-Files im nvidia-kernel Paket hab ich es in
> >kürzester Zeit geschafft, beide zum Rennen zu bringen mit TwinView.
> >
> >Was mich jetzt aber nervt, ist die Tatsache, daß ich es noch nicht
> >geschafft habe, das Primäre Display auf den richtigen Monitor zu
> >bekommen. Mir ist klar, daß ich mit "RightOf" usw. die Dinger
> >anordnen kann ... aber ich will, daß er den, der am DVI hängt als
> >"Primary" nimmt. D.h. dort den GDM darstellt und so Zeugs.
> >
> >Grafikkarte ist ne NVIDIA 5900FX.
> >
> >
> >  
> >
> Hallo,
> ich hatte das (glaub ich, is schon länger her) mit
>  Option "ConnectedMonitor"         "DFP-0,CRT-1"
> hinbekommen.
> du hast ja anscheinend am VGA nen TFT hängen
> keine Ahnung ob er das dann mit DFP-1 richtig zuordnet

Vielen Dank, ich werds nachher gleich mal testen ....

Viele Grüße,

Werner

-- 
gentoo-user-de@gentoo.org mailing list