Guten Tag zusammen,

meine neue PCMCIA-WiFi versucht schon seit mehren Tagen hartneckig den Dienst zu verweigern und mir das Wochenende zu vermiesen (letzteres hat sie mit Bravour geschafft). Wahrscheinlich habe ich die Konfiguration verbockt, aber ich sehe nicht wo.
Hat jemand eine D-Link DWL-G650 AirPlusXtremeG (KEINE +) zum laufen gebracht?
Ich bin extrem Dankbar für jeden Hinweis.

Matthias

Zu den Fakten:
----------------------------------------------------------------------------------------------------------------------------------------
Installierte Packete:
net-wireless/madwifi-driver-0.1_pre20050809-r1  0 kB
net-wireless/madwifi-tools-0.1_pre20050420  0 kB
sys-apps/baselayout-1.12.0_pre8-r1  -bootstrap -build -static +unicode 0 kB
net-wireless/wireless-tools-28_pre9  -multicall +nls 0 kB
sys-apps/pcmcia-cs-3.2.8-r2  +X +gtk +gtk2 +trusted -vanilla -xforms 0 kB
----------------------------------------------------------------------------------------------------------------------------------------
/etc/init.d/net.ath0 ist ein Link auf /etc/init.d/net.lo - Gegen net.eth0 verlinkt brachte mich auch nicht weiter.
----------------------------------------------------------------------------------------------------------------------------------------
dmesg:
Sep  5 07:56:09 laptux PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
Sep  5 07:56:09 laptux ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
Sep  5 07:56:10 laptux Build date: Sep  4 2005
Sep  5 07:56:10 laptux Debugging version (IEEE80211)
Sep  5 07:56:10 laptux ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
Sep  5 07:56:10 laptux ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
Sep  5 07:56:10 laptux ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
Sep  5 07:56:10 laptux ath0: H/W encryption support: WEP AES AES_CCM TKIP
Sep  5 07:56:10 laptux ath0: mac 7.9 phy 4.5 radio 5.6
Sep  5 07:56:10 laptux ath0: Use hw queue 1 for WME_AC_BE traffic
Sep  5 07:56:10 laptux ath0: Use hw queue 0 for WME_AC_BK traffic
Sep  5 07:56:10 laptux ath0: Use hw queue 2 for WME_AC_VI traffic
Sep  5 07:56:10 laptux ath0: Use hw queue 3 for WME_AC_VO traffic
Sep  5 07:56:10 laptux ath0: Use hw queue 8 for CAB traffic
Sep  5 07:56:10 laptux ath0: Use hw queue 9 for beacons
Sep  5 07:56:10 laptux Debugging version (ATH)
Sep  5 07:56:10 laptux ath0: Atheros 5212: mem=0x1e800000, irq=9
----------------------------------------------------------------------------------------------------------------------------------------
lspci:
0000:02:00:00.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)
----------------------------------------------------------------------------------------------------------------------------------------
/etc/conf.d/net:
    config_eth0=( "192.168.1.4/24" )
    routes_eth0=( "default gw 192.168.1.1" )

    modules=( "wpa_supplicant" )
    wpa_supplicant_ath0="-Dmadwifi"
    config_ath0=( "192.168.1.5/24" )
    routes_ath0=( "default gw 192.168.1.1" )
----------------------------------------------------------------------------------------------------------------------------------------
/etc/wpa_supplicant:
    ctrl_interface=/var/run/wpa_supplicant
    ctrl_interface_group=0
    eapol_version=1
    ap_scan=1
    fast_reauth=1

    # Simple case: WPA-PSK, PSK as an ASCII passphrase, allow all valid ciphers
    network={
ssid="sierra.lan"
scan_ssid=1
proto=WPA
key_mgmt=WPA-PSK
pairwise=TKIP CCMP
psk="drecks-wpa"
priority=5
    }
----------------------------------------------------------------------------------------------------------------------------------------
/etc/init.d/net.ath0 start:
Loading networking modules for ath0
Starting ath0
   Loading networking modules for ath0
     modules: macchanger macnet rename wpa_supplicant iptunnel essidnet ifconfig adsl system apipa
       wpa_supplicant provides wireless
       ifconfig provides interface
   Configuring ath0 for MAC address 00:11:95:BF:19:73 ...
   Starting wpa_supplicant on ath0 ...
ioctl[SIOCSIWPMKSA]: Operation not supported
   Starting wpa_cli on ath0 ...
     Waiting for association
     Failed to configure ath0 in the background
----------------------------------------------------------------------------------------------------------------------------------------