public inbox for gentoo-user-br@lists.gentoo.org
 help / color / mirror / Atom feed
From: "Fahad Kalil" <fahadkalil@gmail.com>
To: gentoo-user-br@lists.gentoo.org
Subject: Re: [gentoo-user-br] Broadcom b4311
Date: Tue, 7 Oct 2008 22:42:09 -0300	[thread overview]
Message-ID: <353a923a0810071842y55ebd3fcj99d49a87a45f6554@mail.gmail.com> (raw)
In-Reply-To: <724d72960810071645i47850066k2cd4bf324ad6b7d8@mail.gmail.com>

[-- Attachment #1: Type: text/plain, Size: 2118 bytes --]

Olá..

eu tenho no meu notebook a placa BCM4312

Ela funcionou seguindo essas dicas do site linuxwireless.org:

Após habilitar o driver no KERNEL!

Pra mim funcionou apenas com o kernel 2.6.24 .. no 25 nao rolo

----------------------

You are using the b43 driver from linux-2.6.24

If you are using the b43 driver from linux-2.6.24, follow these
instructions.

Use version 011 of b43-fwcutter.
Download, extract the b43-fwcutter tarball and build it:

wget http://bu3sch.de/b43/fwcutter/b43-fwcutter-011.tar.bz2
tar xjf b43-fwcutter-011.tar.bz2
cd b43-fwcutter-011
make
cd ..

Use version 4.80.53.0 of Broadcom's proprietary driver.
Download and extract the firmware from this driver tarball:

export FIRMWARE_INSTALL_DIR="/lib/firmware"
wget http://downloads.openwrt.org/sources/broadcom-wl-4.80.53.0.tar.bz2
tar xjf broadcom-wl-4.80.53.0.tar.bz2
cd broadcom-wl-4.80.53.0/kmod
sudo ../../b43-fwcutter-011/b43-fwcutter -w "$FIRMWARE_INSTALL_DIR"
wl_apsta.o

Note that you must adjust the FIRMWARE_INSTALL_DIR path to your
distribution. The standard place where firmware is installed to is
/lib/firmware. However some distributions put firmware in a different place.


----------------
2008/10/7 Renato de Oliveira Diogo <renato.diogo@gmail.com>

> Senhores
>
> boa noite
>
> estou tentando ativar a minha placa wireless, mas não estou tendo sucesso.
>
> Fiz a ativação no kernel, compilação do módulo, e a instalação da
> b43-fwcutter.
>
> Porém ela não levanta, nem aparece referencia no ifconfig (mesmo fazendo o
> módulo subir manualmente com "modprobe b43").
>
> Alguem ja passou por esse problema e poderia me dar algum detalhe a mais do
> que as documentações do wiki do gentoo?
>
> Obs.: é em um note acer aspire 5100.
> lspci
> * 02:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN
> (rev 01)
>
> []s
> ________________________________________________
> Renato de Oliveira Diogo
>
> Bacharel em Ciência da Computação
> UNESP - Bauru
>
> renato.diogo@gmail.com
> renato.diogo@yahoo.com.br
>



-- 
FAHAD KALIL

[-- Attachment #2: Type: text/html, Size: 2931 bytes --]

  reply	other threads:[~2008-10-08  1:45 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-10-07 23:45 [gentoo-user-br] Broadcom b4311 Renato de Oliveira Diogo
2008-10-08  1:42 ` Fahad Kalil [this message]
2008-10-09  0:24   ` Renato de Oliveira Diogo
2008-10-09  0:54     ` Renan Rangel
2008-10-09  1:53       ` Renato de Oliveira Diogo
2008-10-09  3:00         ` Renan Rangel
2008-10-09 20:08           ` Renato de Oliveira Diogo
2008-10-22 15:27             ` Daniel Medeiros
2008-10-22 15:58               ` Diogo Dutra
2008-10-22 16:12                 ` Daniel Medeiros
2008-10-22 16:16                 ` Thiago Nunes
2008-10-26 20:32                   ` Renato de Oliveira Diogo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=353a923a0810071842y55ebd3fcj99d49a87a45f6554@mail.gmail.com \
    --to=fahadkalil@gmail.com \
    --cc=gentoo-user-br@lists.gentoo.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox