public inbox for gentoo-sparc@lists.gentoo.org
 help / color / mirror / Atom feed
From: NADASI Peter <peter@citynet.hu>
To: gentoo-sparc@lists.gentoo.org
Subject: Re: [gentoo-sparc] gentoo on sun v210 running 2.6.x freezes at boot
Date: Wed, 23 Nov 2005 21:44:40 +0100 (CET)	[thread overview]
Message-ID: <Pine.LNX.4.58.0511232143460.31871@mail.citynet.hu> (raw)
In-Reply-To: <4384D075.80809@gentoo.org>

> We are not doing bridging, no. I'd contemplate that the issues are with 32bit
> interfaces not existing for it though. A solution would be to use a 64 bit
> static brctl binary. I'll see if I still have a 64 bit userland around.
how to make a 64bit static brctl binary at kernel 2.4.32?

I can't compile the current bridge-utils with 2.4.x :(
bye
peter

>
> Josh
>
>
> NADASI Peter wrote:
> >>We see the same problems with the V240 (same board, different case). Dave Miller
> >>(the linux sparc kernel maintainer) does not have access to a similar box, so at
> >>this point, Send Patches. We are having good luck with 2.4.32 except for a few
> >>minor issues.
> >
> > and can you make ethernet bridging with 2.4.3x ?
> > i compiled my kernel with the bridge support, downloaded the
> > bridge-utils v1.0.6 and it requires the 2.6.x series kernel headers :(((
> > since bridge-utils 1.x the 2.6.x kernel is needed... i think.
> > older 0.9.7 versions are compiled fine but i get this message:
> >
> > #./brctl  addbr bri
> > Get bridge indices failed: Operation not supported
> > can't setup bridge control: Operation not supported
> >
> > if I compile it in module, i get the same :(
> >
> > has anyone experience using bridge in 2.4.x?
> > Peter
> >
> >
> >>>I'm running a SUN v210 with 2.4.32 fine but I have to make an ethernet
> >>>bridge and bridge-utils requires 2.6.x
> >>>I have compiled a lot of 2.6.x kernels, with udev, with devfs, etc.. but
> >>>everytime if the 2.6.x is booting, it freezes at:
> >>>
> >>>VFS: Mounted root (ext3 filesystem) readonly.
> >>>
> >>>I don't see the usual INIT message, it doesn't start the boot runlevel.
> >>>It freezes very serious, I can reboot it only after a power-off.
> >>>
> >>>But if I boot with the 2.4.32 then it works pretty well!!!
> >>>
> >>>Have you met this problem earlier?
> >>>Any hints, ideas are welcome!
> >>>Best Regards,
> >>>Peter
> >>>
> >>
>
-- 
gentoo-sparc@gentoo.org mailing list



      reply	other threads:[~2005-11-23 20:45 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-11-23 14:44 [gentoo-sparc] gentoo on sun v210 running 2.6.x freezes at boot NADASI Peter
2005-11-23 19:38 ` Josh Grebe
2005-11-23 20:11   ` NADASI Peter
2005-11-23 20:26     ` Josh Grebe
2005-11-23 20:44       ` NADASI Peter [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Pine.LNX.4.58.0511232143460.31871@mail.citynet.hu \
    --to=peter@citynet.hu \
    --cc=gentoo-sparc@lists.gentoo.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox