* [gentoo-server] smartctl: target a signle disk of a scsi raid array, not the raid array?
@ 2005-09-22 14:36 fire-eyes
2005-09-22 14:45 ` Andrew Gaffney
0 siblings, 1 reply; 5+ messages in thread
From: fire-eyes @ 2005-09-22 14:36 UTC (permalink / raw
To: gentoo-server
How do I use smartctl (smartmontools) on a single disk in a scsi raid
array? I've done it before, I just forget how. /dev/sda is the entire
array, not an individual "disk".
--
gentoo-server@gentoo.org mailing list
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [gentoo-server] smartctl: target a signle disk of a scsi raid array, not the raid array?
2005-09-22 14:36 [gentoo-server] smartctl: target a signle disk of a scsi raid array, not the raid array? fire-eyes
@ 2005-09-22 14:45 ` Andrew Gaffney
2005-09-22 14:57 ` fire-eyes
0 siblings, 1 reply; 5+ messages in thread
From: Andrew Gaffney @ 2005-09-22 14:45 UTC (permalink / raw
To: gentoo-server
fire-eyes wrote:
> How do I use smartctl (smartmontools) on a single disk in a scsi raid
> array? I've done it before, I just forget how. /dev/sda is the entire
> array, not an individual "disk".
If it's *real* hardware RAID, you probably can't as you don't get device nodes
for the individual drives.
--
Andrew Gaffney http://dev.gentoo.org/~agaffney/
Gentoo Linux Developer Installer Project
--
gentoo-server@gentoo.org mailing list
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [gentoo-server] smartctl: target a signle disk of a scsi raid array, not the raid array?
2005-09-22 14:45 ` Andrew Gaffney
@ 2005-09-22 14:57 ` fire-eyes
2005-09-22 15:55 ` A. Khattri
0 siblings, 1 reply; 5+ messages in thread
From: fire-eyes @ 2005-09-22 14:57 UTC (permalink / raw
To: gentoo-server
Andrew Gaffney wrote:
> fire-eyes wrote:
>
>> How do I use smartctl (smartmontools) on a single disk in a scsi raid
>> array? I've done it before, I just forget how. /dev/sda is the entire
>> array, not an individual "disk".
>
>
> If it's *real* hardware RAID, you probably can't as you don't get device
> nodes for the individual drives.
>
It's real, and I would agree if I didn't clearly (not clearly enough to
see the command though) remember doing it in the past few months.
Thanks :)
--
gentoo-server@gentoo.org mailing list
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [gentoo-server] smartctl: target a signle disk of a scsi raid array, not the raid array?
2005-09-22 14:57 ` fire-eyes
@ 2005-09-22 15:55 ` A. Khattri
2005-09-22 16:04 ` fire-eyes
0 siblings, 1 reply; 5+ messages in thread
From: A. Khattri @ 2005-09-22 15:55 UTC (permalink / raw
To: gentoo-server
On Thu, 22 Sep 2005, fire-eyes wrote:
> It's real, and I would agree if I didn't clearly (not clearly enough to
> see the command though) remember doing it in the past few months.
Depends on the controller card - what make/model is it?
--
--
gentoo-server@gentoo.org mailing list
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [gentoo-server] smartctl: target a signle disk of a scsi raid array, not the raid array?
2005-09-22 15:55 ` A. Khattri
@ 2005-09-22 16:04 ` fire-eyes
0 siblings, 0 replies; 5+ messages in thread
From: fire-eyes @ 2005-09-22 16:04 UTC (permalink / raw
To: gentoo-server
A. Khattri wrote:
> On Thu, 22 Sep 2005, fire-eyes wrote:
>
>
>>It's real, and I would agree if I didn't clearly (not clearly enough to
>>see the command though) remember doing it in the past few months.
>
>
> Depends on the controller card - what make/model is it?
>
Adaptec AIC-7892P.
Thanks for replying.
--
gentoo-server@gentoo.org mailing list
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2005-09-22 16:08 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-09-22 14:36 [gentoo-server] smartctl: target a signle disk of a scsi raid array, not the raid array? fire-eyes
2005-09-22 14:45 ` Andrew Gaffney
2005-09-22 14:57 ` fire-eyes
2005-09-22 15:55 ` A. Khattri
2005-09-22 16:04 ` fire-eyes
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox