* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2011-01-29 13:57 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2011-01-29 13:57 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.6.913
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2010 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/space/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/space/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache metadata_overlay pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Use of metadata_overlay module for portage enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for alpha
Source path set to /space/catalyst/tmp/default/stage3-alpha-20110129/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /space/catalyst/builds/default/stage3-alpha-20110129.tar.bz2
Caching snapshot to /space/catalyst/snapshot_cache/20110129/
The autoresume path is /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20110129/
Location of the package cache is /space/catalyst/packages/default/livecd-stage1-alpha-20110129/
Location of the kerncache is /space/catalyst/kerncache/default/livecd-stage1-alpha-20110129/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20110129/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20110129/
clearing chroot ...
Emptying directory /space/catalyst/tmp/default/livecd-stage1-alpha-20110129/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage3-alpha-20110129/
to /space/catalyst/tmp/default/livecd-stage1-alpha-20110129/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
Warning!!!
The use of -* in livecd/use will cause portage to ignore
package.use in the profile and portage_confdir. You've been warned!
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
copying livecd-stage1-chroot.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20110129/tmp/
copying chroot-functions.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20110129/tmp/
Running livecd-stage1-chroot.sh in chroot /space/catalyst/tmp/default/livecd-stage1-alpha-20110129/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps virtual/portage
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.1.9.25
>>> Installing (1 of 1) sys-apps/portage-2.1.9.25
* GNU info directory index is up-to-date.
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
emerge --quiet --usepkg --buildpkg --newuse app-accessibility/brltty app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-editors/zile app-misc/screen app-misc/vlock app-portage/mirrorselect app-text/wgetpaste net-analyzer/traceroute net-dialup/mingetty net-dialup/pptpclient net-dialup/rp-pppoe net-fs/mount-cifs net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-proxy/dante net-proxy/ntlmaps net-proxy/tsocks sys-apps/eject sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-block/parted sys-apps/sdparm sys-fs/cryptsetup sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/lsscsi sys-fs/lvm2 sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links app-misc/livecd-tools
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
emerge: there are no ebuilds built with USE flags to satisfy "dev-libs/libgcrypt[static-libs]".
!!! One of the following packages is required to complete your request:
- dev-libs/libgcrypt-1.4.6 (Change USE: +static-libs)
(dependency required by "sys-fs/cryptsetup-1.1.3-r3" [ebuild])
(dependency required by "sys-fs/cryptsetup" [argument])
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1362, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1367, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20110129/.catalyst_lock'
Full build log at /tmp/catalyst-auto.19884/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2011-04-02 13:08 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2011-04-02 13:08 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.6.914
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2010 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/space/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/space/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache metadata_overlay pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Use of metadata_overlay module for portage enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for alpha
Source path set to /space/catalyst/tmp/default/stage3-alpha-20110402/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /space/catalyst/builds/default/stage3-alpha-20110402.tar.bz2
Caching snapshot to /space/catalyst/snapshot_cache/20110402/
The autoresume path is /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20110402/
Location of the package cache is /space/catalyst/packages/default/livecd-stage1-alpha-20110402/
Location of the kerncache is /space/catalyst/kerncache/default/livecd-stage1-alpha-20110402/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20110402/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20110402/
clearing chroot ...
Emptying directory /space/catalyst/tmp/default/livecd-stage1-alpha-20110402/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage3-alpha-20110402/
to /space/catalyst/tmp/default/livecd-stage1-alpha-20110402/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
Warning!!!
The use of -* in livecd/use will cause portage to ignore
package.use in the profile and portage_confdir. You've been warned!
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
copying livecd-stage1-chroot.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20110402/tmp/
copying chroot-functions.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20110402/tmp/
Running livecd-stage1-chroot.sh in chroot /space/catalyst/tmp/default/livecd-stage1-alpha-20110402/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps virtual/portage
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.1.9.42
>>> Installing (1 of 1) sys-apps/portage-2.1.9.42
* GNU info directory index is up-to-date.
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
emerge --quiet --usepkg --buildpkg --newuse app-accessibility/brltty app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-editors/zile app-misc/screen app-misc/vlock app-portage/mirrorselect app-text/wgetpaste net-analyzer/traceroute net-dialup/mingetty net-dialup/pptpclient net-dialup/rp-pppoe net-fs/mount-cifs net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-proxy/dante net-proxy/ntlmaps net-proxy/tsocks sys-apps/eject sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-block/parted sys-apps/sdparm sys-fs/cryptsetup sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/lsscsi sys-fs/lvm2 sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links app-misc/livecd-tools
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
emerge: there are no ebuilds to satisfy "sys-apps/eject".
emerge: searching for similar names...
emerge: Maybe you meant any of these: dev-ruby/osmlib-base, dev-ruby/kirbybase, dev-ruby/snmplib?
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1362, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1367, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20110402/.catalyst_lock'
Full build log at /tmp/catalyst-auto.26544/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2011-07-23 11:47 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2011-07-23 11:47 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
clearing chroot ...
Emptying directory /space/catalyst/tmp/default/livecd-stage1-alpha-20110723/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage3-alpha-20110723/
to /space/catalyst/tmp/default/livecd-stage1-alpha-20110723/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
Warning!!!
The use of -* in livecd/use will cause portage to ignore
package.use in the profile and portage_confdir. You've been warned!
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
copying livecd-stage1-chroot.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20110723/tmp/
copying chroot-functions.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20110723/tmp/
Running livecd-stage1-chroot.sh in chroot /space/catalyst/tmp/default/livecd-stage1-alpha-20110723/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/portage
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.1.10.3
>>> Installing (1 of 1) sys-apps/portage-2.1.10.3
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
emerge --quiet --usepkg --buildpkg --newuse app-accessibility/brltty app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-editors/zile app-misc/screen app-misc/vlock app-portage/mirrorselect app-text/wgetpaste net-analyzer/traceroute net-dialup/mingetty net-dialup/pptpclient net-dialup/rp-pppoe net-fs/mount-cifs net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-proxy/dante net-proxy/ntlmaps net-proxy/tsocks sys-block/eject sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-block/parted sys-apps/sdparm sys-fs/cryptsetup sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/lsscsi sys-fs/lvm2 sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links app-misc/livecd-tools
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
>>> Verifying ebuild manifests
>>> Starting parallel fetch
>>> Emerging (1 of 81) dev-util/pkgconfig-0.25-r2
>>> Installing (1 of 81) dev-util/pkgconfig-0.25-r2
>>> Emerging (2 of 81) sys-apps/pciutils-3.1.7
>>> Installing (2 of 81) sys-apps/pciutils-3.1.7
>>> Emerging (3 of 81) sys-devel/flex-2.5.35
>>> Failed to emerge sys-devel/flex-2.5.35, Log file:
>>> '/var/tmp/portage/sys-devel/flex-2.5.35/temp/build.log'
* Package: sys-devel/flex-2.5.35
* Repository: gentoo
* Maintainer: base-system@gentoo.org
* USE: alpha elibc_glibc kernel_linux nls userland_GNU
* FEATURES: sandbox
* Applying flex-2.5.34-isatty.patch ...
[ ok ]
* Applying flex-2.5.33-pic.patch ...
[ ok ]
* Applying flex-2.5.35-gcc44.patch ...
[ ok ]
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether NLS is requested... yes
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/gmsgfmt
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for style of include used by make... GNU
checking for alpha-unknown-linux-gnu-gcc... alpha-unknown-linux-gnu-gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether alpha-unknown-linux-gnu-gcc accepts -g... yes
checking for alpha-unknown-linux-gnu-gcc option to accept ANSI C... none needed
checking dependency style of alpha-unknown-linux-gnu-gcc... gcc3
checking build system type... alpha-unknown-linux-gnu
checking host system type... alpha-unknown-linux-gnu
checking for ld used by GCC... /usr/alpha-unknown-linux-gnu/bin/ld
checking if the linker (/usr/alpha-unknown-linux-gnu/bin/ld) is GNU ld... yes
checking for shared library run path origin... done
checking whether NLS is requested... yes
checking for GNU gettext in libc... yes
checking whether to use NLS... yes
checking where the gettext function comes from... libc
checking for bison... no
checking for byacc... no
checking for flex... no
checking for lex... no
checking for yywrap in -lfl... no
checking for yywrap in -ll... no
checking for alpha-unknown-linux-gnu-gcc... (cached) alpha-unknown-linux-gnu-gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether alpha-unknown-linux-gnu-gcc accepts -g... (cached) yes
checking for alpha-unknown-linux-gnu-gcc option to accept ANSI C... (cached) none needed
checking dependency style of alpha-unknown-linux-gnu-gcc... (cached) gcc3
checking for alpha-unknown-linux-gnu-g++... alpha-unknown-linux-gnu-g++
checking whether we are using the GNU C++ compiler... yes
checking whether alpha-unknown-linux-gnu-g++ accepts -g... yes
checking dependency style of alpha-unknown-linux-gnu-g++... gcc3
checking whether ln -s works... yes
checking for alpha-unknown-linux-gnu-ranlib... alpha-unknown-linux-gnu-ranlib
checking for gawk... (cached) gawk
checking for a BSD-compatible install... /usr/bin/install -c
checking for bison... bison
checking for help2man... help2man
checking for gm4... no
checking for gnum4... no
checking for m4... no
checking for GNU m4... no
configure: error: GNU M4 1.4 is required
!!! Please attach the following file when seeking support:
!!! /var/tmp/portage/sys-devel/flex-2.5.35/work/flex-2.5.35/config.log
* ERROR: sys-devel/flex-2.5.35 failed (compile phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 56: Called src_compile
* environment, line 2505: Called econf '--enable-nls'
* ebuild.sh, line 557: Called die
* The specific snippet of code:
* die "econf failed"
*
* If you need support, post the output of 'emerge --info =sys-devel/flex-2.5.35',
* the complete build log and the output of 'emerge -pqv =sys-devel/flex-2.5.35'.
* The complete build log is located at '/var/tmp/portage/sys-devel/flex-2.5.35/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/flex-2.5.35/temp/environment'.
* S: '/var/tmp/portage/sys-devel/flex-2.5.35/work/flex-2.5.35'
* Messages for package sys-apps/pciutils-3.1.7:
* The 'pcimodules' program has been replaced by 'lspci -k'
* Messages for package sys-devel/flex-2.5.35:
* ERROR: sys-devel/flex-2.5.35 failed (compile phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 56: Called src_compile
* environment, line 2505: Called econf '--enable-nls'
* ebuild.sh, line 557: Called die
* The specific snippet of code:
* die "econf failed"
*
* If you need support, post the output of 'emerge --info =sys-devel/flex-2.5.35',
* the complete build log and the output of 'emerge -pqv =sys-devel/flex-2.5.35'.
* The complete build log is located at '/var/tmp/portage/sys-devel/flex-2.5.35/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/flex-2.5.35/temp/environment'.
* S: '/var/tmp/portage/sys-devel/flex-2.5.35/work/flex-2.5.35'
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1362, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1367, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20110723/.catalyst_lock'
Full build log at /tmp/catalyst-auto.7950/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2012-07-28 15:18 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2012-07-28 15:18 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.8.1
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2011 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/space/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/space/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for alpha
Source path set to /space/catalyst/tmp/default/stage3-alpha-20120728/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /space/catalyst/builds/default/stage3-alpha-20120728.tar.bz2
Caching snapshot to /space/catalyst/snapshot_cache/20120728/
The autoresume path is /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20120728/
Location of the package cache is /space/catalyst/packages/default/livecd-stage1-alpha-20120728/
Location of the kerncache is /space/catalyst/kerncache/default/livecd-stage1-alpha-20120728/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20120728/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20120728/
clearing chroot ...
Emptying directory /space/catalyst/tmp/default/livecd-stage1-alpha-20120728/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage3-alpha-20120728/
to /space/catalyst/tmp/default/livecd-stage1-alpha-20120728/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
copying livecd-stage1-chroot.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20120728/tmp/
copying chroot-functions.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20120728/tmp/
Running livecd-stage1-chroot.sh in chroot /space/catalyst/tmp/default/livecd-stage1-alpha-20120728/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps --update sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.1.10.65
>>> Installing (1 of 1) sys-apps/portage-2.1.10.65
emerge --quiet --usepkg --buildpkg --newuse app-accessibility/brltty app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-editors/mg app-misc/screen app-misc/vlock app-portage/mirrorselect app-text/wgetpaste net-analyzer/traceroute net-dialup/mingetty net-dialup/pptpclient net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-proxy/dante net-proxy/ntlmaps net-proxy/tsocks sys-apps/busybox sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/sdparm sys-block/eject sys-block/parted sys-fs/cryptsetup sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/lsscsi sys-fs/lvm2 sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links app-misc/livecd-tools
[ebuild N ] sys-apps/pciutils-3.1.9-r1
[ebuild N ] sys-apps/hwdata-gentoo-0.4
[ebuild N ] net-dialup/mingetty-1.08
[ebuild N ] media-libs/libpng-1.5.10
[ebuild N ] dev-libs/libevent-2.0.18
[ebuild N ] net-analyzer/netselect-0.3-r2
[ebuild N ] dev-libs/eventlog-0.2.12
[ebuild N ] app-crypt/pinentry-0.8.0
[ebuild N ] media-libs/libjpeg-turbo-1.2.1
[ebuild N ] app-admin/pwgen-2.06
[ebuild N ] app-arch/unzip-5.52-r2
[ebuild N ] app-editors/mg-20110905
[ebuild N ] net-analyzer/traceroute-2.0.18
[ebuild N ] net-misc/dhcpcd-5.2.12
[ebuild N ] net-misc/rdate-1.4-r3
[ebuild N ] sys-apps/ethtool-2.6.36
[ebuild N ] sys-apps/hdparm-9.39
[ebuild N ] sys-apps/sdparm-1.06
[ebuild N ] sys-fs/dosfstools-3.0.9
[ebuild N ] sys-fs/lsscsi-0.25
[ebuild N ] sys-fs/mdadm-3.1.4
[ebuild N ] sys-fs/reiserfsprogs-3.6.21-r1
[ebuild R ] sys-apps/busybox-1.20.1
[ebuild N ] dev-libs/libgpg-error-1.10
[ebuild N ] dev-util/dialog-1.1.20120215
[ebuild R ] dev-libs/popt-1.16-r1
[ebuild N ] sys-apps/iproute2-2.6.38
[ebuild N ] net-libs/libnfsidmap-0.24
[ebuild N ] dev-libs/pth-2.0.7-r3
[ebuild N ] sys-apps/ed-1.4
[ebuild N ] virtual/jpeg-0
[ebuild N ] app-accessibility/brltty-4.2
[ebuild N ] app-misc/vlock-2.2.3
[ebuild N ] app-text/wgetpaste-2.20-r1
[ebuild N ] net-misc/ntp-4.2.6_p5-r1
[ebuild N ] net-proxy/ntlmaps-0.9.9-r2
[ebuild N ] net-proxy/tsocks-1.8_beta5-r5
[ebuild N ] sys-block/eject-2.1.5-r2
[ebuild N ] sys-fs/xfsprogs-3.1.7
[ebuild R ] sys-fs/e2fsprogs-1.42
[ebuild R ] sys-apps/util-linux-2.20.1-r2
[ebuild N ] dev-libs/libgcrypt-1.4.6
[ebuild N ] net-libs/libtirpc-0.2.2-r1
[ebuild N ] net-dialup/ppp-2.4.5-r1
[ebuild N ] net-proxy/dante-1.1.19-r4
[ebuild N ] sys-fs/lvm2-2.02.88
[ebuild N ] sys-libs/libkudzu-1.2.57.1
[ebuild N ] sys-libs/libcap-2.22
[ebuild N ] net-misc/curl-7.24.0
[ebuild N ] dev-libs/libksba-1.2.0
[ebuild N ] dev-libs/libassuan-2.0.1
[ebuild N ] net-mail/mailbase-1
[ebuild N ] app-admin/syslog-ng-3.2.5
[ebuild N ] app-misc/screen-4.0.3-r5
[ebuild N ] app-portage/mirrorselect-2.1.0-r3
[ebuild N ] www-client/links-2.6
[ebuild N ] app-misc/livecd-tools-2.0.2
[ebuild N ] net-nds/rpcbind-0.2.0
[ebuild N ] mail-mta/ssmtp-2.64-r2
[ebuild N ] net-dialup/pptpclient-1.7.2-r2
[ebuild N ] net-dialup/rp-pppoe-3.8-r2
[ebuild N ] net-fs/cifs-utils-5.5-r1
[ebuild N ] net-irc/irssi-0.8.15
[ebuild N ] sys-apps/hwsetup-1.2-r2
[ebuild N ] sys-block/parted-3.1
[ebuild N ] sys-fs/cryptsetup-1.4.1
[ebuild N ] virtual/mta-0
[ebuild N ] net-fs/nfs-utils-1.2.3-r1
[ebuild N ] app-crypt/gnupg-2.0.17
The following keyword changes are necessary to proceed:
#required by net-fs/cifs-utils (argument)
=net-fs/cifs-utils-5.5-r1 ~alpha
Use --autounmask-write to write changes to config files (honoring CONFIG_PROTECT).
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1353, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 206, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1254, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1358, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20120728/.catalyst_lock'
Full build log at /tmp/catalyst-auto.5303/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2012-08-04 15:48 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2012-08-04 15:48 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.8.1
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2011 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/space/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/space/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for alpha
Source path set to /space/catalyst/tmp/default/stage3-alpha-20120804/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /space/catalyst/builds/default/stage3-alpha-20120804.tar.bz2
Caching snapshot to /space/catalyst/snapshot_cache/20120804/
The autoresume path is /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20120804/
Location of the package cache is /space/catalyst/packages/default/livecd-stage1-alpha-20120804/
Location of the kerncache is /space/catalyst/kerncache/default/livecd-stage1-alpha-20120804/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20120804/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20120804/
clearing chroot ...
Emptying directory /space/catalyst/tmp/default/livecd-stage1-alpha-20120804/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage3-alpha-20120804/
to /space/catalyst/tmp/default/livecd-stage1-alpha-20120804/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
copying livecd-stage1-chroot.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20120804/tmp/
copying chroot-functions.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20120804/tmp/
Running livecd-stage1-chroot.sh in chroot /space/catalyst/tmp/default/livecd-stage1-alpha-20120804/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps --update sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.1.10.65
>>> Installing (1 of 1) sys-apps/portage-2.1.10.65
emerge --quiet --usepkg --buildpkg --newuse app-accessibility/brltty app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-editors/mg app-misc/screen app-misc/vlock app-portage/mirrorselect app-text/wgetpaste net-analyzer/traceroute net-dialup/mingetty net-dialup/pptpclient net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-proxy/dante net-proxy/ntlmaps net-proxy/tsocks sys-apps/busybox sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/sdparm sys-block/eject sys-block/parted sys-fs/cryptsetup sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/lsscsi sys-fs/lvm2 sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links app-misc/livecd-tools
[ebuild N ] sys-apps/pciutils-3.1.9-r1
[ebuild N ] sys-apps/hwdata-gentoo-0.4
[ebuild N ] net-dialup/mingetty-1.08
[ebuild N ] media-libs/libpng-1.5.10
[ebuild N ] dev-libs/libevent-2.0.18
[ebuild N ] net-analyzer/netselect-0.3-r2
[ebuild N ] dev-libs/eventlog-0.2.12
[ebuild N ] app-crypt/pinentry-0.8.0
[ebuild N ] media-libs/libjpeg-turbo-1.2.1
[ebuild N ] app-admin/pwgen-2.06
[ebuild N ] app-arch/unzip-5.52-r2
[ebuild N ] app-editors/mg-20110905
[ebuild N ] net-analyzer/traceroute-2.0.18
[ebuild N ] net-misc/dhcpcd-5.2.12
[ebuild N ] net-misc/rdate-1.4-r3
[ebuild N ] sys-apps/ethtool-2.6.36
[ebuild N ] sys-apps/hdparm-9.39
[ebuild N ] sys-apps/sdparm-1.06
[ebuild N ] sys-fs/dosfstools-3.0.9
[ebuild N ] sys-fs/lsscsi-0.25
[ebuild N ] sys-fs/mdadm-3.1.4
[ebuild N ] sys-fs/reiserfsprogs-3.6.21-r1
[ebuild R ] sys-apps/busybox-1.20.1
[ebuild N ] dev-libs/libgpg-error-1.10
[ebuild N ] dev-util/dialog-1.1.20120215
[ebuild R ] dev-libs/popt-1.16-r1
[ebuild N ] sys-apps/iproute2-2.6.38
[ebuild N ] net-libs/libnfsidmap-0.24
[ebuild N ] dev-libs/pth-2.0.7-r3
[ebuild N ] sys-apps/ed-1.4
[ebuild N ] virtual/jpeg-0
[ebuild N ] app-accessibility/brltty-4.2
[ebuild N ] app-misc/vlock-2.2.3
[ebuild N ] app-text/wgetpaste-2.20-r1
[ebuild N ] net-misc/ntp-4.2.6_p5-r1
[ebuild N ] net-proxy/ntlmaps-0.9.9-r2
[ebuild N ] net-proxy/tsocks-1.8_beta5-r5
[ebuild N ] sys-block/eject-2.1.5-r2
[ebuild N ] sys-fs/xfsprogs-3.1.7
[ebuild R ] sys-fs/e2fsprogs-1.42
[ebuild R ] sys-apps/util-linux-2.20.1-r2
[ebuild N ] dev-libs/libgcrypt-1.4.6
[ebuild N ] net-libs/libtirpc-0.2.2-r1
[ebuild N ] net-dialup/ppp-2.4.5-r1
[ebuild N ] net-proxy/dante-1.1.19-r4
[ebuild N ] sys-fs/lvm2-2.02.88
[ebuild N ] sys-libs/libkudzu-1.2.57.1
[ebuild N ] sys-libs/libcap-2.22
[ebuild N ] net-misc/curl-7.24.0
[ebuild N ] dev-libs/libksba-1.2.0
[ebuild N ] dev-libs/libassuan-2.0.1
[ebuild N ] net-mail/mailbase-1
[ebuild N ] app-admin/syslog-ng-3.2.5
[ebuild N ] app-misc/screen-4.0.3-r5
[ebuild N ] app-portage/mirrorselect-2.1.0-r3
[ebuild N ] www-client/links-2.6
[ebuild N ] app-misc/livecd-tools-2.0.2
[ebuild N ] net-nds/rpcbind-0.2.0
[ebuild N ] mail-mta/ssmtp-2.64-r2
[ebuild N ] net-dialup/pptpclient-1.7.2-r2
[ebuild N ] net-dialup/rp-pppoe-3.8-r2
[ebuild N ] net-fs/cifs-utils-5.5-r1
[ebuild N ] net-irc/irssi-0.8.15
[ebuild N ] sys-apps/hwsetup-1.2-r2
[ebuild N ] sys-block/parted-3.1
[ebuild N ] sys-fs/cryptsetup-1.4.1
[ebuild N ] virtual/mta-0
[ebuild N ] net-fs/nfs-utils-1.2.3-r1
[ebuild N ] app-crypt/gnupg-2.0.17
The following keyword changes are necessary to proceed:
#required by net-fs/cifs-utils (argument)
=net-fs/cifs-utils-5.5-r1 ~alpha
Use --autounmask-write to write changes to config files (honoring CONFIG_PROTECT).
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1353, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 206, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1254, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1358, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20120804/.catalyst_lock'
Full build log at /tmp/catalyst-auto.13732/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2012-08-11 20:29 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2012-08-11 20:29 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
alpha-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I../include/curl -I../include -I../include -I../lib -I../src -I../lib -I../src -mieee -pipe -O2 -mcpu=ev4 -c tool_writeenv.c
alpha-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I../include/curl -I../include -I../include -I../lib -I../src -I../lib -I../src -mieee -pipe -O2 -mcpu=ev4 -c tool_writeout.c
alpha-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I../include/curl -I../include -I../include -I../lib -I../src -I../lib -I../src -mieee -pipe -O2 -mcpu=ev4 -c tool_xattr.c
alpha-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I../include/curl -I../include -I../include -I../lib -I../src -I../lib -I../src -mieee -pipe -O2 -mcpu=ev4 -c -o strtoofft.o `test -f '../lib/strtoofft.c' || echo './'`../lib/strtoofft.c
alpha-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I../include/curl -I../include -I../include -I../lib -I../src -I../lib -I../src -mieee -pipe -O2 -mcpu=ev4 -c -o strdup.o `test -f '../lib/strdup.c' || echo './'`../lib/strdup.c
alpha-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I../include/curl -I../include -I../include -I../lib -I../src -I../lib -I../src -mieee -pipe -O2 -mcpu=ev4 -c -o rawstr.o `test -f '../lib/rawstr.c' || echo './'`../lib/rawstr.c
alpha-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I../include/curl -I../include -I../include -I../lib -I../src -I../lib -I../src -mieee -pipe -O2 -mcpu=ev4 -c -o nonblock.o `test -f '../lib/nonblock.c' || echo './'`../lib/nonblock.c
/bin/sh ../libtool --tag=CC --mode=link alpha-unknown-linux-gnu-gcc -mieee -pipe -O2 -mcpu=ev4 -Wl,-O1 -Wl,--as-needed -o curl hugehelp.o tool_binmode.o tool_bname.o tool_cb_dbg.o tool_cb_hdr.o tool_cb_prg.o tool_cb_rea.o tool_cb_see.o tool_cb_skt.o tool_cb_wrt.o tool_cfgable.o tool_convert.o tool_dirhie.o tool_doswin.o tool_easysrc.o tool_formparse.o tool_getparam.o tool_getpass.o tool_help.o tool_helpers.o tool_homedir.o tool_libinfo.o tool_main.o tool_mfiles.o tool_msgs.o tool_operate.o tool_operhlp.o tool_panykey.o tool_paramhlp.o tool_parsecfg.o tool_setopt.o tool_sleep.o tool_urlglob.o tool_util.o tool_vms.o tool_writeenv.o tool_writeout.o tool_xattr.o strtoofft.o strdup.o rawstr.o nonblock.o ../lib/libcurl.la -lrt -lz
libtool: link: alpha-unknown-linux-gnu-gcc -mieee -pipe -O2 -mcpu=ev4 -Wl,-O1 -o .libs/curl hugehelp.o tool_binmode.o tool_bname.o tool_cb_dbg.o tool_cb_hdr.o tool_cb_prg.o tool_cb_rea.o tool_cb_see.o tool_cb_skt.o tool_cb_wrt.o tool_cfgable.o tool_convert.o tool_dirhie.o tool_doswin.o tool_easysrc.o tool_formparse.o tool_getparam.o tool_getpass.o tool_help.o tool_helpers.o tool_homedir.o tool_libinfo.o tool_main.o tool_mfiles.o tool_msgs.o tool_operate.o tool_operhlp.o tool_panykey.o tool_paramhlp.o tool_parsecfg.o tool_setopt.o tool_sleep.o tool_urlglob.o tool_util.o tool_vms.o tool_writeenv.o tool_writeout.o tool_xattr.o strtoofft.o strdup.o rawstr.o nonblock.o -Wl,--as-needed ../lib/.libs/libcurl.so -lssl -lcrypto -lrt -lz
make[2]: Leaving directory `/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0/src'
make[1]: Leaving directory `/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0/src'
Making all in include
make[1]: Entering directory `/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0/include'
Making all in curl
make[2]: Entering directory `/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0/include/curl'
(CDPATH="${ZSH_VERSION+.}:" && cd ../.. && /bin/sh "/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0/missing" --run autoheader)
rm -f stamp-h3
touch curlbuild.h.in
cd ../.. && /bin/sh ./config.status include/curl/curlbuild.h
config.status: creating include/curl/curlbuild.h
config.status: include/curl/curlbuild.h is unchanged
make all-am
make[3]: Entering directory `/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0/include/curl'
make[3]: Leaving directory `/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0/include/curl'
make[2]: Leaving directory `/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0/include/curl'
make[2]: Entering directory `/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0/include'
make[2]: Nothing to be done for `all-am'.
make[2]: Leaving directory `/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0/include'
make[1]: Leaving directory `/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0/include'
make[1]: Entering directory `/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0'
make[1]: Nothing to be done for `all-am'.
make[1]: Leaving directory `/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0'
/var/tmp/portage/net-misc/curl-7.24.0/temp/environment: line 2832: /usr/portage/net-misc/curl/files/config.h.ed: No such file or directory
* ERROR: net-misc/curl-7.24.0 failed (compile phase):
* (no error message)
*
* Call stack:
* ebuild.sh, line 85: Called src_compile
* environment, line 2832: Called die
* The specific snippet of code:
* ed - lib/curl_config.h < "${FILESDIR}"/config.h.ed || die;
*
* If you need support, post the output of `emerge --info '=net-misc/curl-7.24.0'`,
* the complete build log and the output of `emerge -pqv '=net-misc/curl-7.24.0'`.
* The complete build log is located at '/var/tmp/portage/net-misc/curl-7.24.0/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/net-misc/curl-7.24.0/temp/environment'.
* Working directory: '/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0'
* S: '/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0'
* Messages for package sys-apps/pciutils-3.1.9-r1:
* The 'pcimodules' program has been replaced by 'lspci -k'
* Messages for package app-crypt/pinentry-0.8.0:
* We no longer install pinentry-curses and pinentry-qt SUID root by default.
* Linux kernels >=2.6.9 support memory locking for unprivileged processes.
* The soft resource limit for memory locking specifies the limit an
* unprivileged process may lock into memory. You can also use POSIX
* capabilities to allow pinentry to lock memory. To do so activate the caps
* USE flag and add the CAP_IPC_LOCK capability to the permitted set of
* your users.
* Messages for package net-misc/dhcpcd-5.2.12:
* You have installed dhcpcd with zeroconf support.
* This means that it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the -L flag.
* See the dhcpcd man page for more details.
*
* Users upgrading from 4.0 series should pay attention to removal
* of compat useflag. This changes behavior of dhcp in wide manner:
* dhcpcd no longer sends a default ClientID for ethernet interfaces.
* This is so we can re-use the address the kernel DHCP client found.
* To retain the old behaviour of sending a default ClientID based on the
* hardware address for interface, simply add the keyword clientid
* to dhcpcd.conf or use commandline parameter -I ''
*
* Also, users upgrading from 4.0 series should be aware that
* the -N, -R and -Y command line options no longer exist.
* These are controled now by nohook options in dhcpcd.conf.
* Messages for package sys-fs/mdadm-3.1.4:
* If using baselayout-2 and not relying on kernel auto-detect
* of your RAID devices, you need to add 'mdraid' to your 'boot'
* runlevel. Run the following command:
* rc-update add mdraid boot
* Messages for package sys-apps/busybox-1.20.1:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.20.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.20.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package app-accessibility/brltty-4.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/ntp-4.2.6_p5-r1:
* You can find an example /etc/ntp.conf in /usr/share/ntp/
* Review /etc/ntp.conf to setup server info.
* Review /etc/conf.d/ntpd to setup init.d info.
* The way ntp sets and maintains your system time has changed.
* Now you can use /etc/init.d/ntp-client to set your time at
* boot while you can use /etc/init.d/ntpd to maintain your time
* while your machine runs
* Messages for package sys-fs/e2fsprogs-1.42:
* No /etc/mtab file, creating one temporarily
* Messages for package sys-apps/util-linux-2.20.1-r2:
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package net-dialup/ppp-2.4.5-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Pon, poff and plog scripts have been supplied for experienced users.
* Users needing particular scripts (ssh,rsh,etc.) should check out the
* /usr/share/doc/ppp-2.4.5-r1/scripts directory.
* Messages for package sys-fs/lvm2-2.02.88:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Warning, we no longer overwrite /sbin/lvm and /sbin/dmsetup with
* their static versions. If you need the static binaries,
* you must append .static to the filename!
* USE flag nocman is deprecated and replaced
* with the cman USE flag.
*
* USE flags clvm and cman are masked
* by default and need to be unmasked to be used
*
* If you are using genkernel and root-on-LVM, rebuild the initramfs.
* lvm volumes are no longer automatically created for
* baselayout-2 users. If you are using baselayout-2, be sure to
* run: # rc-update add lvm boot
* Do NOT add it if you are still using baselayout-1.
* Messages for package net-misc/curl-7.24.0:
* ERROR: net-misc/curl-7.24.0 failed (compile phase):
* (no error message)
*
* Call stack:
* ebuild.sh, line 85: Called src_compile
* environment, line 2832: Called die
* The specific snippet of code:
* ed - lib/curl_config.h < "${FILESDIR}"/config.h.ed || die;
*
* If you need support, post the output of `emerge --info '=net-misc/curl-7.24.0'`,
* the complete build log and the output of `emerge -pqv '=net-misc/curl-7.24.0'`.
* The complete build log is located at '/var/tmp/portage/net-misc/curl-7.24.0/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/net-misc/curl-7.24.0/temp/environment'.
* Working directory: '/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0'
* S: '/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1353, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 206, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1254, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1358, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20120811/.catalyst_lock'
Full build log at /tmp/catalyst-auto.24718/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2012-08-18 22:53 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2012-08-18 22:53 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* This means that it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the -L flag.
* See the dhcpcd man page for more details.
*
* Users upgrading from 4.0 series should pay attention to removal
* of compat useflag. This changes behavior of dhcp in wide manner:
* dhcpcd no longer sends a default ClientID for ethernet interfaces.
* This is so we can re-use the address the kernel DHCP client found.
* To retain the old behaviour of sending a default ClientID based on the
* hardware address for interface, simply add the keyword clientid
* to dhcpcd.conf or use commandline parameter -I ''
*
* Also, users upgrading from 4.0 series should be aware that
* the -N, -R and -Y command line options no longer exist.
* These are controled now by nohook options in dhcpcd.conf.
* Messages for package app-crypt/pinentry-0.8.0:
* We no longer install pinentry-curses and pinentry-qt SUID root by default.
* Linux kernels >=2.6.9 support memory locking for unprivileged processes.
* The soft resource limit for memory locking specifies the limit an
* unprivileged process may lock into memory. You can also use POSIX
* capabilities to allow pinentry to lock memory. To do so activate the caps
* USE flag and add the CAP_IPC_LOCK capability to the permitted set of
* your users.
* Messages for package net-dialup/ppp-2.4.5-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Pon, poff and plog scripts have been supplied for experienced users.
* Users needing particular scripts (ssh,rsh,etc.) should check out the
* /usr/share/doc/ppp-2.4.5-r1/scripts directory.
* Messages for package net-mail/mailbase-1:
* Your //var/spool/mail/ directory permissions differ from
* those which mailbase set when you first installed it (0775).
* If you did not change them on purpose, consider running:
*
* chmod 0775 //var/spool/mail/
* Messages for package sys-apps/busybox-1.20.1:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.20.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.20.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package sys-apps/openrc-0.9.8.4:
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
*
* Please read the migration guide available at:
* http://www.gentoo.org/doc/en/openrc-migration.xml
* Messages for package net-fs/cifs-utils-5.4:
* You must enable CIFS support in your kernel config,
* to be able to mount samba shares. You can find it at
*
* File systems
* Network File Systems
* CIFS support
*
* and recompile your kernel ...
* setuid use flag was dropped due to multiple security implications
* such as CVE-2009-2948, CVE-2011-3585 and CVE-2012-1586
* You are free to set setuid flags by yourself
* Messages for package app-accessibility/brltty-4.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package app-misc/screen-4.0.3-r5:
* Some dangerous key bindings have been removed or changed to more safe values.
* We enable some xterm hacks in our default screenrc, which might break some
* applications. Please check /etc/screenrc for information on these changes.
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/util-linux-2.20.1-r2:
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-apps/pciutils-3.1.9-r1:
* The 'pcimodules' program has been replaced by 'lspci -k'
* Messages for package sys-fs/mdadm-3.1.4:
* If using baselayout-2 and not relying on kernel auto-detect
* of your RAID devices, you need to add 'mdraid' to your 'boot'
* runlevel. Run the following command:
* rc-update add mdraid boot
* Messages for package app-misc/livecd-tools-2.0.2:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* Messages for package sys-apps/hwsetup-1.2-r2:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* This package is intended for usage on the Gentoo release media. If
* you are not building a CD, remove this package. It will not work
* properly on a running system, as Gentoo does not use any of the
* Knoppix-style detection except for CD builds.
* Messages for package net-misc/ntp-4.2.6_p5-r1:
* You can find an example /etc/ntp.conf in /usr/share/ntp/
* Review /etc/ntp.conf to setup server info.
* Review /etc/conf.d/ntpd to setup init.d info.
* The way ntp sets and maintains your system time has changed.
* Now you can use /etc/init.d/ntp-client to set your time at
* boot while you can use /etc/init.d/ntpd to maintain your time
* while your machine runs
* Messages for package sys-fs/lvm2-2.02.88:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Warning, we no longer overwrite /sbin/lvm and /sbin/dmsetup with
* their static versions. If you need the static binaries,
* you must append .static to the filename!
* USE flag nocman is deprecated and replaced
* with the cman USE flag.
*
* USE flags clvm and cman are masked
* by default and need to be unmasked to be used
*
* If you are using genkernel and root-on-LVM, rebuild the initramfs.
* lvm volumes are no longer automatically created for
* baselayout-2 users. If you are using baselayout-2, be sure to
* run: # rc-update add lvm boot
* Do NOT add it if you are still using baselayout-1.
* Messages for package net-misc/curl-7.24.0:
* ERROR: net-misc/curl-7.24.0 failed (compile phase):
* (no error message)
*
* Call stack:
* ebuild.sh, line 85: Called src_compile
* environment, line 2832: Called die
* The specific snippet of code:
* ed - lib/curl_config.h < "${FILESDIR}"/config.h.ed || die;
*
* If you need support, post the output of `emerge --info '=net-misc/curl-7.24.0'`,
* the complete build log and the output of `emerge -pqv '=net-misc/curl-7.24.0'`.
* The complete build log is located at '/var/tmp/portage/net-misc/curl-7.24.0/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/net-misc/curl-7.24.0/temp/environment'.
* Working directory: '/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0'
* S: '/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1350, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 207, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1251, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1355, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20120818/.catalyst_lock'
Full build log at /tmp/catalyst-auto.30453/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2012-08-25 21:53 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2012-08-25 21:53 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* This means that it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the -L flag.
* See the dhcpcd man page for more details.
*
* Users upgrading from 4.0 series should pay attention to removal
* of compat useflag. This changes behavior of dhcp in wide manner:
* dhcpcd no longer sends a default ClientID for ethernet interfaces.
* This is so we can re-use the address the kernel DHCP client found.
* To retain the old behaviour of sending a default ClientID based on the
* hardware address for interface, simply add the keyword clientid
* to dhcpcd.conf or use commandline parameter -I ''
*
* Also, users upgrading from 4.0 series should be aware that
* the -N, -R and -Y command line options no longer exist.
* These are controled now by nohook options in dhcpcd.conf.
* Messages for package app-crypt/pinentry-0.8.0:
* We no longer install pinentry-curses and pinentry-qt SUID root by default.
* Linux kernels >=2.6.9 support memory locking for unprivileged processes.
* The soft resource limit for memory locking specifies the limit an
* unprivileged process may lock into memory. You can also use POSIX
* capabilities to allow pinentry to lock memory. To do so activate the caps
* USE flag and add the CAP_IPC_LOCK capability to the permitted set of
* your users.
* Messages for package net-dialup/ppp-2.4.5-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Pon, poff and plog scripts have been supplied for experienced users.
* Users needing particular scripts (ssh,rsh,etc.) should check out the
* /usr/share/doc/ppp-2.4.5-r1/scripts directory.
* Messages for package net-mail/mailbase-1:
* Your //var/spool/mail/ directory permissions differ from
* those which mailbase set when you first installed it (0775).
* If you did not change them on purpose, consider running:
*
* chmod 0775 //var/spool/mail/
* Messages for package sys-apps/busybox-1.20.1:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.20.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.20.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package sys-apps/openrc-0.9.8.4:
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
*
* Please read the migration guide available at:
* http://www.gentoo.org/doc/en/openrc-migration.xml
* Messages for package net-fs/cifs-utils-5.4:
* You must enable CIFS support in your kernel config,
* to be able to mount samba shares. You can find it at
*
* File systems
* Network File Systems
* CIFS support
*
* and recompile your kernel ...
* setuid use flag was dropped due to multiple security implications
* such as CVE-2009-2948, CVE-2011-3585 and CVE-2012-1586
* You are free to set setuid flags by yourself
* Messages for package app-accessibility/brltty-4.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package app-misc/screen-4.0.3-r5:
* Some dangerous key bindings have been removed or changed to more safe values.
* We enable some xterm hacks in our default screenrc, which might break some
* applications. Please check /etc/screenrc for information on these changes.
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/util-linux-2.20.1-r2:
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-apps/pciutils-3.1.9-r1:
* The 'pcimodules' program has been replaced by 'lspci -k'
* Messages for package sys-fs/mdadm-3.1.4:
* If using baselayout-2 and not relying on kernel auto-detect
* of your RAID devices, you need to add 'mdraid' to your 'boot'
* runlevel. Run the following command:
* rc-update add mdraid boot
* Messages for package app-misc/livecd-tools-2.0.2:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* Messages for package sys-apps/hwsetup-1.2-r2:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* This package is intended for usage on the Gentoo release media. If
* you are not building a CD, remove this package. It will not work
* properly on a running system, as Gentoo does not use any of the
* Knoppix-style detection except for CD builds.
* Messages for package net-misc/ntp-4.2.6_p5-r1:
* You can find an example /etc/ntp.conf in /usr/share/ntp/
* Review /etc/ntp.conf to setup server info.
* Review /etc/conf.d/ntpd to setup init.d info.
* The way ntp sets and maintains your system time has changed.
* Now you can use /etc/init.d/ntp-client to set your time at
* boot while you can use /etc/init.d/ntpd to maintain your time
* while your machine runs
* Messages for package sys-fs/lvm2-2.02.88:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Warning, we no longer overwrite /sbin/lvm and /sbin/dmsetup with
* their static versions. If you need the static binaries,
* you must append .static to the filename!
* USE flag nocman is deprecated and replaced
* with the cman USE flag.
*
* USE flags clvm and cman are masked
* by default and need to be unmasked to be used
*
* If you are using genkernel and root-on-LVM, rebuild the initramfs.
* lvm volumes are no longer automatically created for
* baselayout-2 users. If you are using baselayout-2, be sure to
* run: # rc-update add lvm boot
* Do NOT add it if you are still using baselayout-1.
* Messages for package net-misc/curl-7.24.0:
* ERROR: net-misc/curl-7.24.0 failed (compile phase):
* (no error message)
*
* Call stack:
* ebuild.sh, line 85: Called src_compile
* environment, line 2841: Called die
* The specific snippet of code:
* ed - lib/curl_config.h < "${FILESDIR}"/config.h.ed || die;
*
* If you need support, post the output of `emerge --info '=net-misc/curl-7.24.0'`,
* the complete build log and the output of `emerge -pqv '=net-misc/curl-7.24.0'`.
* The complete build log is located at '/var/tmp/portage/net-misc/curl-7.24.0/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/net-misc/curl-7.24.0/temp/environment'.
* Working directory: '/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0'
* S: '/var/tmp/portage/net-misc/curl-7.24.0/work/curl-7.24.0'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1350, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 207, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1251, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1355, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20120825/.catalyst_lock'
Full build log at /tmp/catalyst-auto.28577/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2012-10-20 13:00 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2012-10-20 13:00 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
The autoresume path is /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20121020/
Location of the package cache is /space/catalyst/packages/default/livecd-stage1-alpha-20121020/
Location of the kerncache is /space/catalyst/kerncache/default/livecd-stage1-alpha-20121020/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20121020/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20121020/
clearing chroot ...
Emptying directory /space/catalyst/tmp/default/livecd-stage1-alpha-20121020/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage3-alpha-20121020/
to /space/catalyst/tmp/default/livecd-stage1-alpha-20121020/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
copying livecd-stage1-chroot.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20121020/tmp/
copying chroot-functions.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20121020/tmp/
Running livecd-stage1-chroot.sh in chroot /space/catalyst/tmp/default/livecd-stage1-alpha-20121020/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps --update sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.1.11.9
>>> Installing (1 of 1) sys-apps/portage-2.1.11.9
emerge --quiet --usepkg --buildpkg --newuse --update --deep --new app-accessibility/brltty app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-editors/mg app-misc/screen app-misc/vlock app-portage/mirrorselect app-text/wgetpaste net-analyzer/traceroute net-dialup/mingetty net-dialup/pptpclient net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-proxy/dante net-proxy/ntlmaps net-proxy/tsocks sys-apps/busybox sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/sdparm sys-block/eject sys-block/parted sys-fs/cryptsetup sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/lsscsi sys-fs/lvm2 sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links app-misc/livecd-tools
[ebuild R ] sys-libs/zlib-1.2.7
[ebuild R ] app-arch/bzip2-1.0.6-r3
[ebuild R ] dev-libs/expat-2.1.0-r2
[ebuild R ] app-arch/xz-utils-5.0.4
[ebuild N ] sys-apps/hwdata-gentoo-0.4
[ebuild N ] net-dialup/mingetty-1.08
[ebuild N ] net-analyzer/netselect-0.3-r2
[ebuild N ] dev-libs/eventlog-0.2.12
[ebuild R ] dev-libs/libffi-3.0.11
[ebuild N ] dev-util/gperf-3.0.4
[ebuild N ] media-libs/libjpeg-turbo-1.2.1
[ebuild N ] app-admin/pwgen-2.06-r1
[ebuild N ] net-analyzer/traceroute-2.0.18
[ebuild N ] net-misc/dhcpcd-5.2.12
[ebuild N ] net-misc/rdate-1.4-r3
[ebuild N ] sys-apps/ethtool-2.6.36
[ebuild N ] sys-apps/hdparm-9.39
[ebuild N ] sys-apps/sdparm-1.07
[ebuild N ] sys-fs/dosfstools-3.0.12
[ebuild N ] sys-fs/lsscsi-0.26
[ebuild N ] sys-fs/reiserfsprogs-3.6.21-r1
[ebuild R ] sys-libs/ncurses-5.9-r2
[ebuild R ] sys-libs/cracklib-2.8.19
[ebuild R ] sys-apps/file-5.11
[ebuild N ] sys-apps/pciutils-3.1.9-r1
[ebuild N ] media-libs/libpng-1.5.13-r1
[ebuild N ] virtual/jpeg-0
[ebuild N ] app-arch/unzip-6.0-r3
[ebuild N ] sys-apps/iproute2-2.6.38
[ebuild N ] app-editors/mg-20110905
[ebuild N ] sys-apps/ed-1.6
[ebuild R ] sys-apps/busybox-1.20.2
[ebuild N ] app-misc/vlock-2.2.3
[ebuild N ] net-dialup/ppp-2.4.5-r1
[ebuild N ] net-mail/mailbase-1
[ebuild R ] sys-apps/openrc-0.9.8.4
[ebuild N ] net-dialup/pptpclient-1.7.2-r2
[ebuild R ] dev-libs/libxml2-2.8.0-r2
[ebuild N ] net-libs/libnfsidmap-0.24
[ebuild N ] app-accessibility/brltty-4.2
[ebuild N ] app-misc/screen-4.0.3-r5
[ebuild N ] net-dialup/rp-pppoe-3.8-r2
[ebuild N ] net-proxy/tsocks-1.8_beta5-r5
[ebuild R ] dev-libs/openssl-1.0.0j
[ebuild N ] dev-libs/libevent-2.0.19
[ebuild N ] mail-mta/ssmtp-2.64-r2
[ebuild N ] net-misc/ntp-4.2.6_p5-r1
[ebuild N ] virtual/mta-0
[ebuild N ] app-text/wgetpaste-2.20-r1
[ebuild N ] net-proxy/dante-1.1.19-r4
[ebuild N ] dev-libs/pth-2.0.7-r3
[ebuild N ] app-admin/eselect-pinentry-0.3
[ebuild N ] app-crypt/pinentry-0.8.1
[ebuild N ] net-proxy/ntlmaps-0.9.9-r2
[ebuild R ] sys-apps/portage-2.1.11.9
[ebuild N ] net-libs/libtirpc-0.2.2-r1
[ebuild NS ] dev-lang/python-2.7.3-r2 [3.2.3-r1]
[ebuild N ] net-misc/curl-7.26.0
[ebuild R ] dev-libs/libpcre-8.30-r2
[ebuild N ] www-client/links-2.7
[ebuild N ] net-nds/rpcbind-0.2.0
[ebuild N ] sys-apps/kmod-10
[uninstall ] sys-apps/module-init-tools-3.16-r1
[blocks b ] sys-apps/kmod ("sys-apps/kmod" is blocking sys-apps/module-init-tools-3.16-r1)
[blocks b ] sys-apps/module-init-tools ("sys-apps/module-init-tools" is blocking sys-apps/kmod-10)
[ebuild R ] sys-devel/gettext-0.18.1.1-r3
[ebuild R ] sys-apps/util-linux-2.21.2
[ebuild R ] sys-libs/e2fsprogs-libs-1.42
[ebuild R ] dev-libs/popt-1.16-r1
[ebuild R ] sys-apps/attr-2.4.46-r1
[ebuild R ] sys-devel/binutils-2.22-r1
[ebuild N ] dev-libs/libgpg-error-1.10
[ebuild R ] dev-libs/glib-2.32.4-r1
[ebuild N ] dev-util/dialog-1.1.20120215
[ebuild N ] sys-block/eject-2.1.5-r2
[ebuild R ] sys-apps/acl-2.2.51
[ebuild R ] sys-fs/e2fsprogs-1.42
[ebuild N ] dev-libs/libgcrypt-1.5.0-r2
[ebuild N ] sys-fs/lvm2-2.02.88
[ebuild N ] sys-libs/libkudzu-1.2.57.1
[ebuild N ] sys-libs/libcap-2.22
[ebuild N ] dev-libs/libksba-1.2.0
[ebuild N ] dev-libs/libassuan-2.0.3
[ebuild N ] app-admin/syslog-ng-3.2.5
[ebuild N ] app-portage/mirrorselect-2.1.0-r3
[ebuild N ] net-fs/nfs-utils-1.2.3-r1
[ebuild N ] net-irc/irssi-0.8.15
[ebuild N ] sys-fs/mdadm-3.1.4
[ebuild N ] sys-fs/xfsprogs-3.1.8
[ebuild N ] app-misc/livecd-tools-2.0.2
[ebuild R ] virtual/acl-0-r1
[ebuild N ] app-crypt/gnupg-2.0.19
[ebuild N ] net-fs/cifs-utils-5.5-r1
[ebuild N ] sys-apps/hwsetup-1.2-r2
[ebuild N ] sys-block/parted-3.1
[ebuild N ] sys-fs/udev-init-scripts-17
[ebuild U ] sys-fs/udev-194 [171-r7]
[ebuild N ] sys-fs/cryptsetup-1.4.1
[blocks B ] <sys-fs/udev-186 ("<sys-fs/udev-186" is blocking sys-fs/udev-init-scripts-17)
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-fs/udev:0
(sys-fs/udev-194::gentoo, ebuild scheduled for merge) pulled in by
>=sys-fs/udev-187 required by (sys-fs/udev-init-scripts-17::gentoo, ebuild scheduled for merge)
(and 1 more with the same problem)
(sys-fs/udev-171-r7::gentoo, installed) pulled in by
(no parents that aren't satisfied by other packages in this slot)
The following keyword changes are necessary to proceed:
#required by sys-fs/udev-194[openrc], required by sys-fs/cryptsetup-1.4.1[static], required by sys-fs/cryptsetup (argument)
=sys-fs/udev-init-scripts-17 ~alpha
#required by sys-fs/udev-init-scripts-17
=sys-fs/udev-194 ~alpha
#required by sys-fs/udev-194, required by sys-fs/udev-init-scripts-17
=sys-apps/kmod-10 ~alpha
Use --autounmask-write to write changes to config files (honoring CONFIG_PROTECT).
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1358, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 208, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1259, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1363, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20121020/.catalyst_lock'
Full build log at /release/tmp/catalyst-auto.4049/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2012-11-10 14:04 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2012-11-10 14:04 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/space/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for alpha
Source path set to /space/catalyst/tmp/default/stage3-alpha-20121110/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /space/catalyst/builds/default/stage3-alpha-20121110.tar.bz2
Caching snapshot to /space/catalyst/snapshot_cache/20121110/
The autoresume path is /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20121110/
Location of the package cache is /space/catalyst/packages/default/livecd-stage1-alpha-20121110/
Location of the kerncache is /space/catalyst/kerncache/default/livecd-stage1-alpha-20121110/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20121110/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20121110/
clearing chroot ...
Emptying directory /space/catalyst/tmp/default/livecd-stage1-alpha-20121110/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage3-alpha-20121110/
to /space/catalyst/tmp/default/livecd-stage1-alpha-20121110/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
copying livecd-stage1-chroot.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20121110/tmp/
copying chroot-functions.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20121110/tmp/
Running livecd-stage1-chroot.sh in chroot /space/catalyst/tmp/default/livecd-stage1-alpha-20121110/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps --update sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.1.11.9
>>> Installing (1 of 1) sys-apps/portage-2.1.11.9
emerge --quiet --usepkg --buildpkg --newuse --update --deep --new app-accessibility/brltty app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-editors/mg app-misc/screen app-misc/vlock app-portage/mirrorselect app-text/wgetpaste net-analyzer/traceroute net-dialup/mingetty net-dialup/pptpclient net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-proxy/dante net-proxy/ntlmaps net-proxy/tsocks sys-apps/busybox sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/sdparm sys-block/eject sys-block/parted sys-fs/cryptsetup sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/lsscsi sys-fs/lvm2 sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links app-misc/livecd-tools
[ebuild R ] sys-libs/zlib-1.2.7
[ebuild R ] app-arch/bzip2-1.0.6-r3
[ebuild R ] dev-libs/expat-2.1.0-r2
[ebuild R ] app-arch/xz-utils-5.0.4
[ebuild N ] sys-apps/hwdata-gentoo-0.4
[ebuild N ] net-dialup/mingetty-1.08
[ebuild N ] net-analyzer/netselect-0.3-r2
[ebuild N ] dev-libs/eventlog-0.2.12
[ebuild R ] dev-libs/libffi-3.0.11
[ebuild N ] media-libs/libjpeg-turbo-1.2.1
[ebuild N ] app-admin/pwgen-2.06-r1
[ebuild N ] net-analyzer/traceroute-2.0.18
[ebuild N ] net-misc/dhcpcd-5.2.12
[ebuild N ] net-misc/rdate-1.4-r3
[ebuild N ] sys-apps/ethtool-2.6.36
[ebuild N ] sys-apps/hdparm-9.39
[ebuild N ] sys-apps/sdparm-1.07
[ebuild N ] sys-fs/dosfstools-3.0.12
[ebuild N ] sys-fs/lsscsi-0.26
[ebuild N ] sys-fs/reiserfsprogs-3.6.21-r1
[ebuild R ] sys-libs/ncurses-5.9-r2
[ebuild R ] sys-libs/cracklib-2.8.19
[ebuild R ] sys-apps/file-5.11
[ebuild N ] sys-apps/pciutils-3.1.9-r1
[ebuild N ] media-libs/libpng-1.5.13-r1
[ebuild N ] virtual/jpeg-0
[ebuild N ] app-arch/unzip-6.0-r3
[ebuild N ] sys-apps/iproute2-2.6.38
[ebuild N ] app-editors/mg-20110905
[ebuild N ] sys-apps/ed-1.6
[ebuild R ] sys-apps/busybox-1.20.2
[ebuild N ] app-misc/vlock-2.2.3
[ebuild N ] net-dialup/ppp-2.4.5-r1
[ebuild N ] net-mail/mailbase-1
[ebuild R ] sys-apps/openrc-0.9.8.4
[ebuild N ] net-dialup/pptpclient-1.7.2-r2
[ebuild R ] dev-libs/libxml2-2.8.0-r2
[ebuild N ] net-libs/libnfsidmap-0.24
[ebuild N ] app-accessibility/brltty-4.2
[ebuild N ] app-misc/screen-4.0.3-r6
[ebuild N ] net-dialup/rp-pppoe-3.8-r2
[ebuild N ] net-proxy/tsocks-1.8_beta5-r5
[ebuild R ] dev-libs/openssl-1.0.0j
[ebuild N ] dev-libs/libevent-2.0.20
[ebuild N ] mail-mta/ssmtp-2.64-r2
[ebuild N ] net-misc/ntp-4.2.6_p5-r1
[ebuild N ] virtual/mta-0
[ebuild N ] app-text/wgetpaste-2.20-r1
[ebuild N ] net-proxy/dante-1.1.19-r4
[ebuild N ] dev-libs/pth-2.0.7-r3
[ebuild N ] app-admin/eselect-pinentry-0.3
[ebuild N ] app-crypt/pinentry-0.8.1
[ebuild N ] net-proxy/ntlmaps-0.9.9-r2
[ebuild R ] sys-apps/portage-2.1.11.9
[ebuild N ] net-libs/libtirpc-0.2.2-r1
[ebuild NS ] dev-lang/python-2.7.3-r2 [3.2.3-r1]
[ebuild N ] net-misc/curl-7.26.0
[ebuild R ] dev-libs/libpcre-8.30-r2
[ebuild N ] www-client/links-2.7
[ebuild N ] net-nds/rpcbind-0.2.0
[ebuild R ] sys-devel/gettext-0.18.1.1-r3
[ebuild R ] sys-apps/util-linux-2.21.2
[ebuild R ] sys-libs/e2fsprogs-libs-1.42
[ebuild R ] dev-libs/popt-1.16-r1
[ebuild R ] sys-apps/attr-2.4.46-r1
[ebuild R ] sys-devel/binutils-2.22-r1
[ebuild N ] dev-libs/libgpg-error-1.10
[ebuild R ] dev-libs/glib-2.32.4-r1
[ebuild N ] dev-util/dialog-1.1.20120215
[ebuild N ] sys-block/eject-2.1.5-r2
[ebuild R ] sys-apps/acl-2.2.51
[ebuild R ] sys-fs/e2fsprogs-1.42
[ebuild N ] dev-libs/libgcrypt-1.5.0-r2
[ebuild N ] sys-fs/lvm2-2.02.88
[ebuild N ] sys-libs/libkudzu-1.2.57.1
[ebuild N ] sys-libs/libcap-2.22
[ebuild N ] dev-libs/libksba-1.2.0
[ebuild N ] dev-libs/libassuan-2.0.3
[ebuild N ] app-admin/syslog-ng-3.2.5
[ebuild N ] app-portage/mirrorselect-2.1.0-r3
[ebuild N ] net-fs/nfs-utils-1.2.3-r1
[ebuild N ] net-irc/irssi-0.8.15
[ebuild N ] sys-fs/mdadm-3.1.4
[ebuild N ] sys-fs/xfsprogs-3.1.8
[ebuild N ] app-misc/livecd-tools-2.0.2
[ebuild R ] virtual/acl-0-r1
[ebuild N ] app-crypt/gnupg-2.0.19
[ebuild N ] net-fs/cifs-utils-5.5-r1
[ebuild N ] sys-apps/hwsetup-1.2-r2
[ebuild N ] sys-block/parted-3.1
[ebuild N ] sys-fs/cryptsetup-1.4.1
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
dev-libs/openssl:0
(dev-libs/openssl-1.0.0j::gentoo, installed) pulled in by
>=dev-libs/openssl-0.9.6d:0[bindist=] required by (net-misc/openssh-5.9_p1-r4::gentoo, installed)
(dev-libs/openssl-1.0.0j::gentoo, ebuild scheduled for merge) pulled in by
dev-libs/openssl[static-libs?] required by (net-misc/curl-7.26.0::gentoo, ebuild scheduled for merge)
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1358, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 208, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1259, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1363, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20121110/.catalyst_lock'
Full build log at /catalyst-auto.27751/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2012-11-17 17:04 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2012-11-17 17:04 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/space/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for alpha
Source path set to /space/catalyst/tmp/default/stage3-alpha-20121117/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /space/catalyst/builds/default/stage3-alpha-20121117.tar.bz2
Caching snapshot to /space/catalyst/snapshot_cache/20121117/
The autoresume path is /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20121117/
Location of the package cache is /space/catalyst/packages/default/livecd-stage1-alpha-20121117/
Location of the kerncache is /space/catalyst/kerncache/default/livecd-stage1-alpha-20121117/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20121117/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20121117/
clearing chroot ...
Emptying directory /space/catalyst/tmp/default/livecd-stage1-alpha-20121117/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage3-alpha-20121117/
to /space/catalyst/tmp/default/livecd-stage1-alpha-20121117/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
copying livecd-stage1-chroot.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20121117/tmp/
copying chroot-functions.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20121117/tmp/
Running livecd-stage1-chroot.sh in chroot /space/catalyst/tmp/default/livecd-stage1-alpha-20121117/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps --update sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.1.11.9
>>> Installing (1 of 1) sys-apps/portage-2.1.11.9
emerge --quiet --usepkg --buildpkg --newuse --update --deep --new app-accessibility/brltty app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-editors/mg app-misc/screen app-misc/vlock app-portage/mirrorselect app-text/wgetpaste net-analyzer/traceroute net-dialup/mingetty net-dialup/pptpclient net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-proxy/dante net-proxy/ntlmaps net-proxy/tsocks sys-apps/busybox sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/sdparm sys-block/eject sys-block/parted sys-fs/cryptsetup sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/lsscsi sys-fs/lvm2 sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links app-misc/livecd-tools
[ebuild R ] sys-libs/zlib-1.2.7
[ebuild R ] app-arch/bzip2-1.0.6-r3
[ebuild R ] dev-libs/expat-2.1.0-r2
[ebuild R ] app-arch/xz-utils-5.0.4
[ebuild N ] sys-apps/hwdata-gentoo-0.4
[ebuild N ] net-dialup/mingetty-1.08
[ebuild N ] net-analyzer/netselect-0.3-r2
[ebuild N ] dev-libs/eventlog-0.2.12
[ebuild R ] dev-libs/libffi-3.0.11
[ebuild N ] media-libs/libjpeg-turbo-1.2.1
[ebuild N ] app-admin/pwgen-2.06-r1
[ebuild N ] net-analyzer/traceroute-2.0.18
[ebuild N ] net-misc/dhcpcd-5.2.12
[ebuild N ] net-misc/rdate-1.4-r3
[ebuild N ] sys-apps/ethtool-2.6.36
[ebuild N ] sys-apps/hdparm-9.39
[ebuild N ] sys-apps/sdparm-1.07
[ebuild N ] sys-fs/dosfstools-3.0.12
[ebuild N ] sys-fs/lsscsi-0.26
[ebuild N ] sys-fs/reiserfsprogs-3.6.21-r1
[ebuild R ] sys-libs/ncurses-5.9-r2
[ebuild R ] sys-libs/cracklib-2.8.19
[ebuild R ] sys-apps/file-5.11
[ebuild N ] sys-apps/pciutils-3.1.9-r1
[ebuild N ] media-libs/libpng-1.5.13-r1
[ebuild N ] virtual/jpeg-0
[ebuild N ] app-arch/unzip-6.0-r3
[ebuild N ] sys-apps/iproute2-2.6.38
[ebuild N ] app-editors/mg-20110905
[ebuild N ] sys-apps/ed-1.6
[ebuild R ] sys-apps/busybox-1.20.2
[ebuild N ] app-misc/vlock-2.2.3
[ebuild N ] net-dialup/ppp-2.4.5-r1
[ebuild N ] net-mail/mailbase-1
[ebuild R ] sys-apps/openrc-0.9.8.4
[ebuild N ] net-dialup/pptpclient-1.7.2-r2
[ebuild R ] dev-libs/libxml2-2.8.0-r2
[ebuild N ] net-libs/libnfsidmap-0.24
[ebuild N ] app-accessibility/brltty-4.2
[ebuild N ] app-misc/screen-4.0.3-r6
[ebuild N ] net-dialup/rp-pppoe-3.8-r2
[ebuild N ] net-proxy/tsocks-1.8_beta5-r5
[ebuild R ] dev-libs/openssl-1.0.0j
[ebuild N ] dev-libs/libevent-2.0.20
[ebuild N ] mail-mta/ssmtp-2.64-r2
[ebuild N ] net-misc/ntp-4.2.6_p5-r1
[ebuild N ] virtual/mta-0
[ebuild N ] app-text/wgetpaste-2.20-r1
[ebuild N ] net-proxy/dante-1.1.19-r4
[ebuild N ] dev-libs/pth-2.0.7-r3
[ebuild N ] app-admin/eselect-pinentry-0.3
[ebuild N ] app-crypt/pinentry-0.8.1
[ebuild N ] net-proxy/ntlmaps-0.9.9-r2
[ebuild R ] sys-apps/portage-2.1.11.9
[ebuild N ] net-libs/libtirpc-0.2.2-r1
[ebuild NS ] dev-lang/python-2.7.3-r2 [3.2.3-r1]
[ebuild N ] net-misc/curl-7.26.0
[ebuild R ] dev-libs/libpcre-8.30-r2
[ebuild N ] www-client/links-2.7
[ebuild N ] net-nds/rpcbind-0.2.0
[ebuild R ] sys-devel/gettext-0.18.1.1-r3
[ebuild R ] sys-apps/util-linux-2.21.2
[ebuild R ] sys-libs/e2fsprogs-libs-1.42
[ebuild R ] dev-libs/popt-1.16-r1
[ebuild R ] sys-apps/attr-2.4.46-r1
[ebuild R ] sys-devel/binutils-2.22-r1
[ebuild N ] dev-libs/libgpg-error-1.10
[ebuild R ] dev-libs/glib-2.32.4-r1
[ebuild N ] dev-util/dialog-1.1.20120215
[ebuild N ] sys-block/eject-2.1.5-r2
[ebuild R ] sys-apps/acl-2.2.51
[ebuild R ] sys-fs/e2fsprogs-1.42
[ebuild N ] dev-libs/libgcrypt-1.5.0-r2
[ebuild N ] sys-fs/lvm2-2.02.88
[ebuild N ] sys-libs/libkudzu-1.2.57.1
[ebuild N ] sys-libs/libcap-2.22
[ebuild N ] dev-libs/libksba-1.2.0
[ebuild N ] dev-libs/libassuan-2.0.3
[ebuild N ] app-admin/syslog-ng-3.2.5
[ebuild N ] app-portage/mirrorselect-2.1.0-r3
[ebuild N ] net-fs/nfs-utils-1.2.3-r1
[ebuild N ] net-irc/irssi-0.8.15
[ebuild N ] sys-fs/mdadm-3.1.4
[ebuild N ] sys-fs/xfsprogs-3.1.8
[ebuild N ] app-misc/livecd-tools-2.0.2
[ebuild R ] virtual/acl-0-r1
[ebuild N ] app-crypt/gnupg-2.0.19
[ebuild N ] net-fs/cifs-utils-5.5-r1
[ebuild N ] sys-apps/hwsetup-1.2-r2
[ebuild N ] sys-block/parted-3.1
[ebuild N ] sys-fs/cryptsetup-1.4.1
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
dev-libs/openssl:0
(dev-libs/openssl-1.0.0j::gentoo, installed) pulled in by
>=dev-libs/openssl-0.9.6d:0[bindist=] required by (net-misc/openssh-5.9_p1-r4::gentoo, installed)
(dev-libs/openssl-1.0.0j::gentoo, ebuild scheduled for merge) pulled in by
dev-libs/openssl[static-libs?] required by (net-misc/curl-7.26.0::gentoo, ebuild scheduled for merge)
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1358, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 208, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1259, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1363, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20121117/.catalyst_lock'
Full build log at /catalyst-auto.23057/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2012-11-24 14:04 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2012-11-24 14:04 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/space/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for alpha
Source path set to /space/catalyst/tmp/default/stage3-alpha-20121124/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /space/catalyst/builds/default/stage3-alpha-20121124.tar.bz2
Caching snapshot to /space/catalyst/snapshot_cache/20121124/
The autoresume path is /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20121124/
Location of the package cache is /space/catalyst/packages/default/livecd-stage1-alpha-20121124/
Location of the kerncache is /space/catalyst/kerncache/default/livecd-stage1-alpha-20121124/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20121124/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20121124/
clearing chroot ...
Emptying directory /space/catalyst/tmp/default/livecd-stage1-alpha-20121124/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage3-alpha-20121124/
to /space/catalyst/tmp/default/livecd-stage1-alpha-20121124/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
copying livecd-stage1-chroot.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20121124/tmp/
copying chroot-functions.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20121124/tmp/
Running livecd-stage1-chroot.sh in chroot /space/catalyst/tmp/default/livecd-stage1-alpha-20121124/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps --update sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.1.11.9
>>> Installing (1 of 1) sys-apps/portage-2.1.11.9
emerge --quiet --usepkg --buildpkg --newuse --update --deep --new app-accessibility/brltty app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-editors/mg app-misc/screen app-misc/vlock app-portage/mirrorselect app-text/wgetpaste net-analyzer/traceroute net-dialup/mingetty net-dialup/pptpclient net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-proxy/dante net-proxy/ntlmaps net-proxy/tsocks sys-apps/busybox sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/sdparm sys-block/eject sys-block/parted sys-fs/cryptsetup sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/lsscsi sys-fs/lvm2 sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links app-misc/livecd-tools
[ebuild R ] sys-libs/zlib-1.2.7
[ebuild R ] app-arch/bzip2-1.0.6-r3
[ebuild R ] dev-libs/expat-2.1.0-r2
[ebuild R ] app-arch/xz-utils-5.0.4
[ebuild N ] sys-apps/hwdata-gentoo-0.4
[ebuild N ] net-dialup/mingetty-1.08
[ebuild N ] net-analyzer/netselect-0.3-r2
[ebuild N ] dev-libs/eventlog-0.2.12
[ebuild R ] dev-libs/libffi-3.0.11
[ebuild N ] media-libs/libjpeg-turbo-1.2.1
[ebuild N ] app-admin/pwgen-2.06-r1
[ebuild N ] net-analyzer/traceroute-2.0.18
[ebuild N ] net-misc/dhcpcd-5.2.12
[ebuild N ] net-misc/rdate-1.4-r3
[ebuild N ] sys-apps/ethtool-2.6.36
[ebuild N ] sys-apps/hdparm-9.39
[ebuild N ] sys-apps/sdparm-1.07
[ebuild N ] sys-fs/dosfstools-3.0.12
[ebuild N ] sys-fs/lsscsi-0.26
[ebuild N ] sys-fs/reiserfsprogs-3.6.21-r1
[ebuild R ] sys-libs/ncurses-5.9-r2
[ebuild R ] sys-libs/cracklib-2.8.19
[ebuild R ] sys-apps/file-5.11
[ebuild N ] sys-apps/pciutils-3.1.9-r1
[ebuild N ] media-libs/libpng-1.5.13-r1
[ebuild N ] virtual/jpeg-0
[ebuild N ] app-arch/unzip-6.0-r3
[ebuild N ] sys-apps/iproute2-2.6.38
[ebuild N ] app-editors/mg-20110905
[ebuild N ] sys-apps/ed-1.6
[ebuild R ] sys-apps/busybox-1.20.2
[ebuild N ] app-misc/vlock-2.2.3
[ebuild N ] net-dialup/ppp-2.4.5-r1
[ebuild N ] net-mail/mailbase-1
[ebuild R ] sys-apps/openrc-0.9.8.4
[ebuild N ] net-dialup/pptpclient-1.7.2-r2
[ebuild R ] dev-libs/libxml2-2.8.0-r2
[ebuild N ] net-libs/libnfsidmap-0.24
[ebuild N ] app-accessibility/brltty-4.2
[ebuild N ] app-misc/screen-4.0.3-r6
[ebuild N ] net-dialup/rp-pppoe-3.8-r2
[ebuild N ] net-proxy/tsocks-1.8_beta5-r5
[ebuild R ] dev-libs/openssl-1.0.0j
[ebuild N ] dev-libs/libevent-2.0.20
[ebuild N ] mail-mta/ssmtp-2.64-r2
[ebuild N ] net-misc/ntp-4.2.6_p5-r1
[ebuild N ] virtual/mta-0
[ebuild N ] app-text/wgetpaste-2.20-r1
[ebuild N ] net-proxy/dante-1.1.19-r4
[ebuild N ] dev-libs/pth-2.0.7-r3
[ebuild N ] app-admin/eselect-pinentry-0.3
[ebuild N ] app-crypt/pinentry-0.8.1
[ebuild N ] net-proxy/ntlmaps-0.9.9-r2
[ebuild R ] sys-apps/portage-2.1.11.9
[ebuild N ] net-libs/libtirpc-0.2.2-r1
[ebuild NS ] dev-lang/python-2.7.3-r2 [3.2.3-r1]
[ebuild N ] net-misc/curl-7.26.0
[ebuild R ] dev-libs/libpcre-8.30-r2
[ebuild N ] www-client/links-2.7
[ebuild N ] net-nds/rpcbind-0.2.0
[ebuild R ] sys-devel/gettext-0.18.1.1-r3
[ebuild R ] sys-apps/util-linux-2.21.2
[ebuild R ] sys-libs/e2fsprogs-libs-1.42
[ebuild R ] dev-libs/popt-1.16-r1
[ebuild R ] sys-apps/attr-2.4.46-r1
[ebuild R ] sys-devel/binutils-2.22-r1
[ebuild N ] dev-libs/libgpg-error-1.10
[ebuild R ] dev-libs/glib-2.32.4-r1
[ebuild N ] dev-util/dialog-1.1.20120215
[ebuild N ] sys-block/eject-2.1.5-r2
[ebuild R ] sys-apps/acl-2.2.51
[ebuild R ] sys-fs/e2fsprogs-1.42
[ebuild N ] dev-libs/libgcrypt-1.5.0-r2
[ebuild N ] sys-fs/lvm2-2.02.88
[ebuild N ] sys-libs/libkudzu-1.2.57.1
[ebuild N ] sys-libs/libcap-2.22
[ebuild N ] dev-libs/libksba-1.2.0
[ebuild N ] dev-libs/libassuan-2.0.3
[ebuild N ] app-admin/syslog-ng-3.2.5
[ebuild N ] app-portage/mirrorselect-2.1.0-r3
[ebuild N ] net-fs/nfs-utils-1.2.3-r1
[ebuild N ] net-irc/irssi-0.8.15
[ebuild N ] sys-fs/mdadm-3.1.4
[ebuild N ] sys-fs/xfsprogs-3.1.8
[ebuild N ] app-misc/livecd-tools-2.0.2
[ebuild R ] virtual/acl-0-r1
[ebuild N ] app-crypt/gnupg-2.0.19
[ebuild N ] net-fs/cifs-utils-5.5-r1
[ebuild N ] sys-apps/hwsetup-1.2-r2
[ebuild N ] sys-block/parted-3.1
[ebuild N ] sys-fs/cryptsetup-1.4.1
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
dev-libs/openssl:0
(dev-libs/openssl-1.0.0j::gentoo, installed) pulled in by
>=dev-libs/openssl-0.9.6d:0[bindist=] required by (net-misc/openssh-5.9_p1-r4::gentoo, installed)
(dev-libs/openssl-1.0.0j::gentoo, ebuild scheduled for merge) pulled in by
dev-libs/openssl[static-libs?] required by (net-misc/curl-7.26.0::gentoo, ebuild scheduled for merge)
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1358, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 208, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1259, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1363, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20121124/.catalyst_lock'
Full build log at /catalyst-auto.25806/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2012-12-01 14:07 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2012-12-01 14:07 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Setting storedir to config file value "/space/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for alpha
Source path set to /space/catalyst/tmp/default/stage3-alpha-20121201/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /space/catalyst/builds/default/stage3-alpha-20121201.tar.bz2
Caching snapshot to /space/catalyst/snapshot_cache/20121201/
The autoresume path is /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20121201/
Location of the package cache is /space/catalyst/packages/default/livecd-stage1-alpha-20121201/
Location of the kerncache is /space/catalyst/kerncache/default/livecd-stage1-alpha-20121201/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20121201/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20121201/
clearing chroot ...
Emptying directory /space/catalyst/tmp/default/livecd-stage1-alpha-20121201/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage3-alpha-20121201/
to /space/catalyst/tmp/default/livecd-stage1-alpha-20121201/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
copying livecd-stage1-chroot.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20121201/tmp/
copying chroot-functions.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20121201/tmp/
Running livecd-stage1-chroot.sh in chroot /space/catalyst/tmp/default/livecd-stage1-alpha-20121201/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps --update sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.1.11.9
>>> Installing (1 of 1) sys-apps/portage-2.1.11.9
emerge --quiet --usepkg --buildpkg --newuse --update --deep --new app-accessibility/brltty app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-editors/mg app-misc/screen app-misc/vlock app-portage/mirrorselect app-text/wgetpaste net-analyzer/traceroute net-dialup/mingetty net-dialup/pptpclient net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-proxy/dante net-proxy/ntlmaps net-proxy/tsocks sys-apps/busybox sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/sdparm sys-block/eject sys-block/parted sys-fs/cryptsetup sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/lsscsi sys-fs/lvm2 sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links app-misc/livecd-tools
[ebuild R ] sys-libs/zlib-1.2.7
[ebuild R ] app-arch/bzip2-1.0.6-r3
[ebuild R ] dev-libs/expat-2.1.0-r2
[ebuild R ] app-arch/xz-utils-5.0.4
[ebuild N ] sys-apps/hwdata-gentoo-0.4
[ebuild N ] net-dialup/mingetty-1.08
[ebuild N ] net-analyzer/netselect-0.3-r2
[ebuild N ] dev-libs/eventlog-0.2.12
[ebuild R ] dev-libs/libffi-3.0.11
[ebuild N ] media-libs/libjpeg-turbo-1.2.1
[ebuild N ] app-admin/pwgen-2.06-r1
[ebuild N ] net-analyzer/traceroute-2.0.18
[ebuild N ] net-misc/dhcpcd-5.2.12
[ebuild N ] net-misc/rdate-1.4-r3
[ebuild N ] sys-apps/ethtool-2.6.36
[ebuild N ] sys-apps/hdparm-9.39
[ebuild N ] sys-apps/sdparm-1.07
[ebuild N ] sys-fs/dosfstools-3.0.12
[ebuild N ] sys-fs/lsscsi-0.26
[ebuild N ] sys-fs/reiserfsprogs-3.6.21-r1
[ebuild R ] sys-libs/ncurses-5.9-r2
[ebuild R ] sys-libs/cracklib-2.8.19
[ebuild R ] sys-apps/file-5.11
[ebuild N ] sys-apps/pciutils-3.1.9-r1
[ebuild N ] media-libs/libpng-1.5.13-r1
[ebuild N ] virtual/jpeg-0
[ebuild N ] app-arch/unzip-6.0-r3
[ebuild N ] sys-apps/iproute2-2.6.38
[ebuild N ] app-editors/mg-20110905
[ebuild N ] sys-apps/ed-1.6
[ebuild R ] sys-apps/busybox-1.20.2
[ebuild N ] app-misc/vlock-2.2.3
[ebuild N ] net-dialup/ppp-2.4.5-r1
[ebuild N ] net-mail/mailbase-1
[ebuild R ] sys-apps/openrc-0.9.8.4
[ebuild N ] net-dialup/pptpclient-1.7.2-r2
[ebuild R ] dev-libs/libxml2-2.8.0-r2
[ebuild N ] net-libs/libnfsidmap-0.24
[ebuild N ] app-accessibility/brltty-4.2
[ebuild N ] app-misc/screen-4.0.3-r6
[ebuild N ] net-dialup/rp-pppoe-3.8-r2
[ebuild N ] net-proxy/tsocks-1.8_beta5-r5
[ebuild R ] dev-libs/openssl-1.0.0j
[ebuild N ] dev-libs/libevent-2.0.20
[ebuild N ] mail-mta/ssmtp-2.64-r2
[ebuild N ] net-misc/ntp-4.2.6_p5-r1
[ebuild N ] virtual/mta-0
[ebuild N ] app-text/wgetpaste-2.20-r1
[ebuild N ] net-proxy/dante-1.1.19-r4
[ebuild N ] dev-libs/pth-2.0.7-r3
[ebuild N ] app-admin/eselect-pinentry-0.3
[ebuild N ] app-crypt/pinentry-0.8.1
[ebuild N ] net-proxy/ntlmaps-0.9.9-r2
[ebuild R ] sys-apps/portage-2.1.11.9
[ebuild N ] net-libs/libtirpc-0.2.2-r1
[ebuild NS ] dev-lang/python-2.7.3-r2 [3.2.3-r1]
[ebuild N ] net-misc/curl-7.26.0
[ebuild R ] dev-libs/libpcre-8.30-r2
[ebuild N ] www-client/links-2.7
[ebuild N ] net-nds/rpcbind-0.2.0
[ebuild R ] virtual/udev-171
[ebuild R ] sys-devel/gettext-0.18.1.1-r3
[ebuild R ] sys-apps/util-linux-2.21.2
[ebuild R ] sys-libs/e2fsprogs-libs-1.42
[ebuild R ] dev-libs/popt-1.16-r1
[ebuild R ] sys-apps/attr-2.4.46-r1
[ebuild R ] sys-devel/binutils-2.22-r1
[ebuild N ] dev-libs/libgpg-error-1.10
[ebuild R ] dev-libs/glib-2.32.4-r1
[ebuild N ] dev-util/dialog-1.1.20120215
[ebuild N ] sys-block/eject-2.1.5-r2
[ebuild R ] sys-apps/acl-2.2.51
[ebuild R ] sys-fs/e2fsprogs-1.42
[ebuild N ] dev-libs/libgcrypt-1.5.0-r2
[ebuild N ] sys-fs/lvm2-2.02.88
[ebuild N ] sys-libs/libkudzu-1.2.57.1
[ebuild N ] sys-libs/libcap-2.22
[ebuild N ] dev-libs/libksba-1.2.0
[ebuild N ] dev-libs/libassuan-2.0.3
[ebuild N ] app-admin/syslog-ng-3.2.5
[ebuild N ] app-portage/mirrorselect-2.1.0-r3
[ebuild N ] net-fs/nfs-utils-1.2.3-r1
[ebuild N ] net-irc/irssi-0.8.15
[ebuild N ] sys-fs/mdadm-3.1.4
[ebuild N ] sys-fs/xfsprogs-3.1.8
[ebuild N ] app-misc/livecd-tools-2.0.2
[ebuild R ] virtual/acl-0-r1
[ebuild N ] app-crypt/gnupg-2.0.19
[ebuild N ] net-fs/cifs-utils-5.5-r1
[ebuild N ] sys-apps/hwsetup-1.2-r2
[ebuild N ] sys-block/parted-3.1
[ebuild N ] sys-fs/cryptsetup-1.4.1
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
dev-libs/openssl:0
(dev-libs/openssl-1.0.0j::gentoo, installed) pulled in by
>=dev-libs/openssl-0.9.6d:0[bindist=] required by (net-misc/openssh-5.9_p1-r4::gentoo, installed)
(dev-libs/openssl-1.0.0j::gentoo, ebuild scheduled for merge) pulled in by
dev-libs/openssl[static-libs?] required by (net-misc/curl-7.26.0::gentoo, ebuild scheduled for merge)
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1358, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 208, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1259, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1363, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20121201/.catalyst_lock'
Full build log at /catalyst-auto.10645/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2012-12-08 14:05 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2012-12-08 14:05 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Setting storedir to config file value "/space/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for alpha
Source path set to /space/catalyst/tmp/default/stage3-alpha-20121208/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /space/catalyst/builds/default/stage3-alpha-20121208.tar.bz2
Caching snapshot to /space/catalyst/snapshot_cache/20121208/
The autoresume path is /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20121208/
Location of the package cache is /space/catalyst/packages/default/livecd-stage1-alpha-20121208/
Location of the kerncache is /space/catalyst/kerncache/default/livecd-stage1-alpha-20121208/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20121208/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20121208/
clearing chroot ...
Emptying directory /space/catalyst/tmp/default/livecd-stage1-alpha-20121208/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage3-alpha-20121208/
to /space/catalyst/tmp/default/livecd-stage1-alpha-20121208/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
copying livecd-stage1-chroot.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20121208/tmp/
copying chroot-functions.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20121208/tmp/
Running livecd-stage1-chroot.sh in chroot /space/catalyst/tmp/default/livecd-stage1-alpha-20121208/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps --update sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.1.11.9
>>> Installing (1 of 1) sys-apps/portage-2.1.11.9
emerge --quiet --usepkg --buildpkg --newuse --update --deep --new app-accessibility/brltty app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-editors/mg app-misc/screen app-misc/vlock app-portage/mirrorselect app-text/wgetpaste net-analyzer/traceroute net-dialup/mingetty net-dialup/pptpclient net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-proxy/dante net-proxy/ntlmaps net-proxy/tsocks sys-apps/busybox sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/sdparm sys-block/eject sys-block/parted sys-fs/cryptsetup sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/lsscsi sys-fs/lvm2 sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links app-misc/livecd-tools
[ebuild R ] sys-libs/zlib-1.2.7
[ebuild R ] app-arch/bzip2-1.0.6-r3
[ebuild R ] dev-libs/expat-2.1.0-r2
[ebuild R ] app-arch/xz-utils-5.0.4
[ebuild N ] sys-apps/hwdata-gentoo-0.4
[ebuild N ] net-dialup/mingetty-1.08
[ebuild N ] net-analyzer/netselect-0.3-r2
[ebuild N ] dev-libs/eventlog-0.2.12
[ebuild R ] dev-libs/libffi-3.0.11
[ebuild N ] media-libs/libjpeg-turbo-1.2.1
[ebuild N ] app-admin/pwgen-2.06-r1
[ebuild N ] net-analyzer/traceroute-2.0.18
[ebuild N ] net-misc/dhcpcd-5.6.2
[ebuild N ] net-misc/rdate-1.4-r3
[ebuild N ] sys-apps/ethtool-2.6.36
[ebuild N ] sys-apps/hdparm-9.39
[ebuild N ] sys-apps/sdparm-1.07
[ebuild N ] sys-fs/dosfstools-3.0.12
[ebuild N ] sys-fs/lsscsi-0.26
[ebuild N ] sys-fs/reiserfsprogs-3.6.21-r1
[ebuild R ] sys-libs/ncurses-5.9-r2
[ebuild R ] sys-libs/cracklib-2.8.19
[ebuild R ] sys-apps/file-5.11
[ebuild N ] sys-apps/pciutils-3.1.9-r1
[ebuild N ] media-libs/libpng-1.5.13-r1
[ebuild N ] virtual/jpeg-0
[ebuild N ] app-arch/unzip-6.0-r3
[ebuild N ] sys-apps/iproute2-2.6.38
[ebuild N ] app-editors/mg-20110905
[ebuild N ] sys-apps/ed-1.6
[ebuild R ] sys-apps/busybox-1.20.2
[ebuild N ] app-misc/vlock-2.2.3
[ebuild N ] net-dialup/ppp-2.4.5-r1
[ebuild N ] net-mail/mailbase-1
[ebuild R ] sys-apps/openrc-0.9.8.4
[ebuild N ] net-dialup/pptpclient-1.7.2-r2
[ebuild R ] dev-libs/libxml2-2.8.0-r2
[ebuild N ] net-libs/libnfsidmap-0.24
[ebuild N ] app-accessibility/brltty-4.2
[ebuild N ] app-misc/screen-4.0.3-r6
[ebuild N ] net-dialup/rp-pppoe-3.8-r2
[ebuild N ] net-proxy/tsocks-1.8_beta5-r5
[ebuild R ] dev-libs/openssl-1.0.0j
[ebuild N ] dev-libs/libevent-2.0.20
[ebuild N ] mail-mta/ssmtp-2.64-r2
[ebuild N ] net-misc/ntp-4.2.6_p5-r1
[ebuild N ] virtual/mta-0
[ebuild N ] app-text/wgetpaste-2.20-r1
[ebuild N ] net-proxy/dante-1.1.19-r4
[ebuild N ] dev-libs/pth-2.0.7-r3
[ebuild N ] app-admin/eselect-pinentry-0.3
[ebuild N ] app-crypt/pinentry-0.8.1
[ebuild N ] net-proxy/ntlmaps-0.9.9-r2
[ebuild R ] sys-apps/portage-2.1.11.9
[ebuild N ] net-libs/libtirpc-0.2.2-r1
[ebuild NS ] dev-lang/python-2.7.3-r2 [3.2.3-r1]
[ebuild N ] net-misc/curl-7.26.0
[ebuild R ] dev-libs/libpcre-8.30-r2
[ebuild N ] www-client/links-2.7
[ebuild N ] net-nds/rpcbind-0.2.0
[ebuild R ] virtual/udev-171
[ebuild R ] sys-devel/gettext-0.18.1.1-r3
[ebuild R ] sys-apps/util-linux-2.21.2
[ebuild R ] sys-libs/e2fsprogs-libs-1.42
[ebuild R ] dev-libs/popt-1.16-r1
[ebuild R ] sys-apps/attr-2.4.46-r1
[ebuild R ] sys-devel/binutils-2.22-r1
[ebuild N ] dev-libs/libgpg-error-1.10
[ebuild R ] dev-libs/glib-2.32.4-r1
[ebuild N ] dev-util/dialog-1.1.20120215
[ebuild N ] sys-block/eject-2.1.5-r2
[ebuild R ] sys-apps/acl-2.2.51
[ebuild R ] sys-fs/e2fsprogs-1.42
[ebuild N ] dev-libs/libgcrypt-1.5.0-r2
[ebuild N ] sys-fs/lvm2-2.02.88
[ebuild N ] sys-libs/libkudzu-1.2.57.1
[ebuild N ] sys-libs/libcap-2.22
[ebuild N ] dev-libs/libksba-1.2.0
[ebuild N ] dev-libs/libassuan-2.0.3
[ebuild N ] app-admin/syslog-ng-3.2.5
[ebuild N ] app-portage/mirrorselect-2.1.0-r3
[ebuild N ] net-fs/nfs-utils-1.2.3-r1
[ebuild N ] net-irc/irssi-0.8.15-r1
[ebuild N ] sys-fs/mdadm-3.1.4
[ebuild N ] sys-fs/xfsprogs-3.1.8
[ebuild N ] app-misc/livecd-tools-2.0.2
[ebuild R ] virtual/acl-0-r1
[ebuild N ] app-crypt/gnupg-2.0.19
[ebuild N ] net-fs/cifs-utils-5.5-r1
[ebuild N ] sys-apps/hwsetup-1.2-r2
[ebuild N ] sys-block/parted-3.1
[ebuild N ] sys-fs/cryptsetup-1.4.1
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
dev-libs/openssl:0
(dev-libs/openssl-1.0.0j::gentoo, installed) pulled in by
>=dev-libs/openssl-0.9.6d:0[bindist=] required by (net-misc/openssh-5.9_p1-r4::gentoo, installed)
(dev-libs/openssl-1.0.0j::gentoo, ebuild scheduled for merge) pulled in by
dev-libs/openssl[static-libs?] required by (net-misc/curl-7.26.0::gentoo, ebuild scheduled for merge)
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1358, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 208, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1259, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1363, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20121208/.catalyst_lock'
Full build log at /catalyst-auto.21403/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2012-12-15 14:15 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2012-12-15 14:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Setting storedir to config file value "/space/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for alpha
Source path set to /space/catalyst/tmp/default/stage3-alpha-20121215/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /space/catalyst/builds/default/stage3-alpha-20121215.tar.bz2
Caching snapshot to /space/catalyst/snapshot_cache/20121215/
The autoresume path is /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20121215/
Location of the package cache is /space/catalyst/packages/default/livecd-stage1-alpha-20121215/
Location of the kerncache is /space/catalyst/kerncache/default/livecd-stage1-alpha-20121215/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20121215/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20121215/
clearing chroot ...
Emptying directory /space/catalyst/tmp/default/livecd-stage1-alpha-20121215/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage3-alpha-20121215/
to /space/catalyst/tmp/default/livecd-stage1-alpha-20121215/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
copying livecd-stage1-chroot.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20121215/tmp/
copying chroot-functions.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20121215/tmp/
Running livecd-stage1-chroot.sh in chroot /space/catalyst/tmp/default/livecd-stage1-alpha-20121215/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps --update sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.1.11.31
>>> Installing (1 of 1) sys-apps/portage-2.1.11.31
emerge --quiet --usepkg --buildpkg --newuse --update --deep --new app-accessibility/brltty app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-editors/mg app-misc/screen app-misc/vlock app-portage/mirrorselect app-text/wgetpaste net-analyzer/traceroute net-dialup/mingetty net-dialup/pptpclient net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-proxy/dante net-proxy/ntlmaps net-proxy/tsocks sys-apps/busybox sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/sdparm sys-block/eject sys-block/parted sys-fs/cryptsetup sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/lsscsi sys-fs/lvm2 sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links app-misc/livecd-tools
[ebuild R ] sys-libs/zlib-1.2.7
[ebuild R ] app-arch/bzip2-1.0.6-r3
[ebuild R ] dev-libs/expat-2.1.0-r2
[ebuild R ] app-arch/xz-utils-5.0.4
[ebuild N ] sys-apps/hwdata-gentoo-0.4
[ebuild N ] net-dialup/mingetty-1.08
[ebuild N ] net-analyzer/netselect-0.3-r2
[ebuild N ] dev-libs/eventlog-0.2.12
[ebuild R ] dev-libs/libffi-3.0.11
[ebuild N ] media-libs/libjpeg-turbo-1.2.1
[ebuild N ] app-admin/pwgen-2.06-r1
[ebuild N ] net-analyzer/traceroute-2.0.18
[ebuild N ] net-misc/dhcpcd-5.6.2
[ebuild N ] net-misc/rdate-1.4-r3
[ebuild N ] sys-apps/ethtool-2.6.36
[ebuild N ] sys-apps/hdparm-9.39
[ebuild N ] sys-apps/sdparm-1.07
[ebuild N ] sys-fs/dosfstools-3.0.12
[ebuild N ] sys-fs/lsscsi-0.26
[ebuild N ] sys-fs/reiserfsprogs-3.6.21-r1
[ebuild R ] sys-libs/ncurses-5.9-r2
[ebuild R ] sys-libs/cracklib-2.8.19
[ebuild R ] sys-apps/file-5.11
[ebuild N ] sys-apps/pciutils-3.1.9-r1
[ebuild N ] media-libs/libpng-1.5.13-r1
[ebuild N ] virtual/jpeg-0
[ebuild N ] app-arch/unzip-6.0-r3
[ebuild N ] sys-apps/iproute2-2.6.38
[ebuild N ] app-editors/mg-20110905
[ebuild N ] sys-apps/ed-1.6
[ebuild R ] sys-apps/busybox-1.20.2
[ebuild N ] app-misc/vlock-2.2.3
[ebuild N ] net-dialup/ppp-2.4.5-r1
[ebuild N ] net-mail/mailbase-1
[ebuild R ] sys-apps/openrc-0.9.8.4
[ebuild N ] net-dialup/pptpclient-1.7.2-r2
[ebuild R ] dev-libs/libxml2-2.8.0-r2
[ebuild N ] net-libs/libnfsidmap-0.24
[ebuild N ] app-misc/screen-4.0.3-r6
[ebuild N ] net-dialup/rp-pppoe-3.8-r2
[ebuild N ] net-proxy/tsocks-1.8_beta5-r5
[ebuild R ] dev-libs/openssl-1.0.0j
[ebuild N ] dev-libs/libevent-2.0.20
[ebuild N ] mail-mta/ssmtp-2.64-r2
[ebuild N ] net-misc/ntp-4.2.6_p5-r1
[ebuild N ] virtual/mta-0
[ebuild N ] app-text/wgetpaste-2.20-r1
[ebuild N ] net-proxy/dante-1.1.19-r4
[ebuild N ] dev-libs/pth-2.0.7-r3
[ebuild N ] app-admin/eselect-pinentry-0.3
[ebuild N ] app-crypt/pinentry-0.8.1
[ebuild N ] net-proxy/ntlmaps-0.9.9-r2
[ebuild R ] sys-apps/portage-2.1.11.31
[ebuild N ] net-libs/libtirpc-0.2.2-r1
[ebuild NS ] dev-lang/python-2.7.3-r2 [3.2.3-r1]
[ebuild N ] net-misc/curl-7.26.0
[ebuild R ] dev-libs/libpcre-8.30-r2
[ebuild N ] app-accessibility/brltty-4.2
[ebuild N ] www-client/links-2.7
[ebuild N ] net-nds/rpcbind-0.2.0
[ebuild R ] virtual/udev-171
[ebuild R ] sys-devel/gettext-0.18.1.1-r3
[ebuild R ] sys-apps/util-linux-2.21.2
[ebuild R ] sys-libs/e2fsprogs-libs-1.42
[ebuild R ] dev-libs/popt-1.16-r1
[ebuild R ] sys-apps/attr-2.4.46-r1
[ebuild R ] sys-devel/binutils-2.22-r1
[ebuild N ] dev-libs/libgpg-error-1.10
[ebuild R ] dev-libs/glib-2.32.4-r1
[ebuild N ] dev-util/dialog-1.1.20120215
[ebuild N ] sys-block/eject-2.1.5-r2
[ebuild R ] sys-apps/acl-2.2.51
[ebuild R ] sys-fs/e2fsprogs-1.42
[ebuild N ] dev-libs/libgcrypt-1.5.0-r2
[ebuild N ] sys-fs/lvm2-2.02.88
[ebuild N ] sys-libs/libkudzu-1.2.57.1
[ebuild N ] sys-libs/libcap-2.22
[ebuild N ] dev-libs/libksba-1.2.0
[ebuild N ] dev-libs/libassuan-2.0.3
[ebuild N ] app-admin/syslog-ng-3.2.5
[ebuild N ] app-portage/mirrorselect-2.1.0-r3
[ebuild N ] net-fs/nfs-utils-1.2.3-r1
[ebuild N ] net-irc/irssi-0.8.15-r1
[ebuild N ] sys-fs/mdadm-3.1.4
[ebuild N ] sys-fs/xfsprogs-3.1.8
[ebuild N ] app-misc/livecd-tools-2.0.2
[ebuild R ] virtual/acl-0-r1
[ebuild N ] app-crypt/gnupg-2.0.19
[ebuild N ] net-fs/cifs-utils-5.5-r1
[ebuild N ] sys-apps/hwsetup-1.2-r2
[ebuild N ] sys-block/parted-3.1
[ebuild N ] sys-fs/cryptsetup-1.4.1
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
dev-libs/openssl:0
(dev-libs/openssl-1.0.0j::gentoo, installed) pulled in by
>=dev-libs/openssl-0.9.6d:0[bindist=] required by (net-misc/openssh-5.9_p1-r4::gentoo, installed)
(dev-libs/openssl-1.0.0j::gentoo, ebuild scheduled for merge) pulled in by
dev-libs/openssl[static-libs?] required by (net-misc/curl-7.26.0::gentoo, ebuild scheduled for merge)
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1358, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 208, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1259, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1363, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20121215/.catalyst_lock'
Full build log at /catalyst-auto.30254/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2012-12-22 14:19 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2012-12-22 14:19 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Setting storedir to config file value "/space/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for alpha
Source path set to /space/catalyst/tmp/default/stage3-alpha-20121222/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /space/catalyst/builds/default/stage3-alpha-20121222.tar.bz2
Caching snapshot to /space/catalyst/snapshot_cache/20121222/
The autoresume path is /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20121222/
Location of the package cache is /space/catalyst/packages/default/livecd-stage1-alpha-20121222/
Location of the kerncache is /space/catalyst/kerncache/default/livecd-stage1-alpha-20121222/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20121222/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20121222/
clearing chroot ...
Emptying directory /space/catalyst/tmp/default/livecd-stage1-alpha-20121222/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage3-alpha-20121222/
to /space/catalyst/tmp/default/livecd-stage1-alpha-20121222/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
copying livecd-stage1-chroot.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20121222/tmp/
copying chroot-functions.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20121222/tmp/
Running livecd-stage1-chroot.sh in chroot /space/catalyst/tmp/default/livecd-stage1-alpha-20121222/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps --update sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.1.11.31
>>> Installing (1 of 1) sys-apps/portage-2.1.11.31
emerge --quiet --usepkg --buildpkg --newuse --update --deep --new app-accessibility/brltty app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-editors/mg app-misc/screen app-misc/vlock app-portage/mirrorselect app-text/wgetpaste net-analyzer/traceroute net-dialup/mingetty net-dialup/pptpclient net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-proxy/dante net-proxy/ntlmaps net-proxy/tsocks sys-apps/busybox sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/sdparm sys-block/eject sys-block/parted sys-fs/cryptsetup sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/lsscsi sys-fs/lvm2 sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links app-misc/livecd-tools
[ebuild R ] sys-libs/zlib-1.2.7
[ebuild R ] app-arch/bzip2-1.0.6-r3
[ebuild R ] dev-libs/expat-2.1.0-r2
[ebuild R ] app-arch/xz-utils-5.0.4
[ebuild N ] sys-apps/hwdata-gentoo-0.4
[ebuild N ] net-dialup/mingetty-1.08
[ebuild N ] net-analyzer/netselect-0.3-r2
[ebuild N ] dev-libs/eventlog-0.2.12
[ebuild R ] dev-libs/libffi-3.0.11
[ebuild N ] media-libs/libjpeg-turbo-1.2.1
[ebuild N ] app-admin/pwgen-2.06-r1
[ebuild N ] net-analyzer/traceroute-2.0.18
[ebuild N ] net-misc/dhcpcd-5.6.4
[ebuild N ] net-misc/rdate-1.4-r3
[ebuild N ] sys-apps/ethtool-2.6.36
[ebuild N ] sys-apps/hdparm-9.39
[ebuild N ] sys-apps/sdparm-1.07
[ebuild N ] sys-fs/dosfstools-3.0.12
[ebuild N ] sys-fs/lsscsi-0.26
[ebuild N ] sys-fs/reiserfsprogs-3.6.21-r1
[ebuild R ] sys-libs/ncurses-5.9-r2
[ebuild R ] sys-libs/cracklib-2.8.19
[ebuild R ] sys-apps/file-5.11
[ebuild N ] sys-apps/pciutils-3.1.9-r1
[ebuild N ] media-libs/libpng-1.5.13-r1
[ebuild N ] virtual/jpeg-0
[ebuild N ] app-arch/unzip-6.0-r3
[ebuild N ] sys-apps/iproute2-2.6.38
[ebuild N ] app-editors/mg-20110905
[ebuild N ] sys-apps/ed-1.6
[ebuild R ] sys-apps/busybox-1.20.2
[ebuild N ] app-misc/vlock-2.2.3
[ebuild N ] net-dialup/ppp-2.4.5-r3
[ebuild N ] net-mail/mailbase-1
[ebuild R ] sys-apps/openrc-0.9.8.4
[ebuild N ] net-dialup/pptpclient-1.7.2-r2
[ebuild R ] dev-libs/libxml2-2.8.0-r3
[ebuild N ] net-libs/libnfsidmap-0.24
[ebuild N ] app-misc/screen-4.0.3-r6
[ebuild N ] net-dialup/rp-pppoe-3.8-r2
[ebuild N ] net-proxy/tsocks-1.8_beta5-r5
[ebuild R ] dev-libs/openssl-1.0.0j
[ebuild N ] dev-libs/libevent-2.0.20
[ebuild N ] mail-mta/ssmtp-2.64-r2
[ebuild N ] net-misc/ntp-4.2.6_p5-r1
[ebuild N ] virtual/mta-0
[ebuild N ] net-proxy/dante-1.1.19-r4
[ebuild N ] dev-libs/pth-2.0.7-r3
[ebuild N ] app-admin/eselect-pinentry-0.3
[ebuild N ] app-crypt/pinentry-0.8.2
[ebuild N ] net-proxy/ntlmaps-0.9.9-r2
[ebuild R ] sys-apps/portage-2.1.11.31
[ebuild N ] app-text/wgetpaste-2.20-r1
[ebuild R ] dev-libs/libpcre-8.30-r2
[ebuild N ] net-libs/libtirpc-0.2.2-r1
[ebuild NS ] dev-lang/python-2.7.3-r2 [3.2.3-r1]
[ebuild N ] net-misc/curl-7.26.0
[ebuild N ] app-accessibility/brltty-4.2
[ebuild N ] www-client/links-2.7
[ebuild N ] net-nds/rpcbind-0.2.0
[ebuild R ] virtual/udev-171
[ebuild R ] sys-devel/gettext-0.18.1.1-r3
[ebuild R ] sys-apps/util-linux-2.21.2
[ebuild R ] sys-libs/e2fsprogs-libs-1.42
[ebuild R ] dev-libs/popt-1.16-r1
[ebuild R ] sys-apps/attr-2.4.46-r1
[ebuild R ] sys-devel/binutils-2.22-r1
[ebuild N ] dev-libs/libgpg-error-1.10
[ebuild R ] dev-libs/glib-2.32.4-r1
[ebuild N ] dev-util/dialog-1.1.20120706
[ebuild N ] sys-block/eject-2.1.5-r2
[ebuild R ] sys-apps/acl-2.2.51
[ebuild R ] sys-fs/e2fsprogs-1.42
[ebuild N ] dev-libs/libgcrypt-1.5.0-r2
[ebuild N ] sys-fs/lvm2-2.02.88
[ebuild N ] sys-libs/libkudzu-1.2.57.1
[ebuild N ] sys-libs/libcap-2.22
[ebuild N ] dev-libs/libksba-1.2.0
[ebuild N ] dev-libs/libassuan-2.0.3
[ebuild N ] app-admin/syslog-ng-3.2.5
[ebuild N ] app-portage/mirrorselect-2.1.0-r3
[ebuild N ] net-fs/nfs-utils-1.2.3-r1
[ebuild N ] net-irc/irssi-0.8.15-r1
[ebuild N ] sys-fs/mdadm-3.1.4
[ebuild N ] sys-fs/xfsprogs-3.1.8
[ebuild N ] app-misc/livecd-tools-2.0.2
[ebuild R ] virtual/acl-0-r1
[ebuild N ] app-crypt/gnupg-2.0.19
[ebuild N ] net-fs/cifs-utils-5.5-r1
[ebuild N ] sys-apps/hwsetup-1.2-r2
[ebuild N ] sys-block/parted-3.1
[ebuild N ] sys-fs/cryptsetup-1.4.3
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
dev-libs/openssl:0
(dev-libs/openssl-1.0.0j::gentoo, installed) pulled in by
>=dev-libs/openssl-0.9.6d:0[bindist=] required by (net-misc/openssh-5.9_p1-r4::gentoo, installed)
(dev-libs/openssl-1.0.0j::gentoo, ebuild scheduled for merge) pulled in by
dev-libs/openssl[static-libs?] required by (net-misc/curl-7.26.0::gentoo, ebuild scheduled for merge)
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1358, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 208, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1259, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1363, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20121222/.catalyst_lock'
Full build log at /catalyst-auto.32066/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2012-12-29 15:47 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2012-12-29 15:47 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Setting storedir to config file value "/space/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for alpha
Source path set to /space/catalyst/tmp/default/stage3-alpha-20121229/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /space/catalyst/builds/default/stage3-alpha-20121229.tar.bz2
Caching snapshot to /space/catalyst/snapshot_cache/20121229/
The autoresume path is /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20121229/
Location of the package cache is /space/catalyst/packages/default/livecd-stage1-alpha-20121229/
Location of the kerncache is /space/catalyst/kerncache/default/livecd-stage1-alpha-20121229/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20121229/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20121229/
clearing chroot ...
Emptying directory /space/catalyst/tmp/default/livecd-stage1-alpha-20121229/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage3-alpha-20121229/
to /space/catalyst/tmp/default/livecd-stage1-alpha-20121229/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
copying livecd-stage1-chroot.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20121229/tmp/
copying chroot-functions.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20121229/tmp/
Running livecd-stage1-chroot.sh in chroot /space/catalyst/tmp/default/livecd-stage1-alpha-20121229/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps --update sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.1.11.31
>>> Installing (1 of 1) sys-apps/portage-2.1.11.31
emerge --quiet --usepkg --buildpkg --newuse --update --deep --new app-accessibility/brltty app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-editors/mg app-misc/screen app-misc/vlock app-portage/mirrorselect app-text/wgetpaste net-analyzer/traceroute net-dialup/mingetty net-dialup/pptpclient net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-proxy/dante net-proxy/ntlmaps net-proxy/tsocks sys-apps/busybox sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/sdparm sys-block/eject sys-block/parted sys-fs/cryptsetup sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/lsscsi sys-fs/lvm2 sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links app-misc/livecd-tools
[ebuild R ] sys-libs/zlib-1.2.7
[ebuild R ] app-arch/bzip2-1.0.6-r3
[ebuild R ] dev-libs/expat-2.1.0-r2
[ebuild R ] app-arch/xz-utils-5.0.4
[ebuild N ] sys-apps/hwdata-gentoo-0.4
[ebuild N ] net-dialup/mingetty-1.08
[ebuild N ] net-analyzer/netselect-0.3-r2
[ebuild N ] dev-libs/eventlog-0.2.12
[ebuild R ] dev-libs/libffi-3.0.11
[ebuild N ] media-libs/libjpeg-turbo-1.2.1
[ebuild N ] app-admin/pwgen-2.06-r1
[ebuild N ] net-analyzer/traceroute-2.0.18
[ebuild N ] net-misc/dhcpcd-5.6.4
[ebuild N ] net-misc/rdate-1.4-r3
[ebuild N ] sys-apps/ethtool-2.6.36
[ebuild N ] sys-apps/hdparm-9.39
[ebuild N ] sys-apps/sdparm-1.07
[ebuild N ] sys-fs/dosfstools-3.0.12
[ebuild N ] sys-fs/lsscsi-0.26
[ebuild N ] sys-fs/reiserfsprogs-3.6.21-r1
[ebuild R ] sys-libs/ncurses-5.9-r2
[ebuild R ] sys-libs/cracklib-2.8.19
[ebuild R ] sys-apps/file-5.11
[ebuild N ] sys-apps/pciutils-3.1.9-r1
[ebuild N ] media-libs/libpng-1.5.13-r1
[ebuild N ] virtual/jpeg-0
[ebuild N ] app-arch/unzip-6.0-r3
[ebuild N ] sys-apps/iproute2-2.6.38
[ebuild N ] app-editors/mg-20110905
[ebuild N ] sys-apps/ed-1.6
[ebuild R ] sys-apps/busybox-1.20.2
[ebuild N ] app-misc/vlock-2.2.3
[ebuild N ] net-dialup/ppp-2.4.5-r3
[ebuild N ] net-mail/mailbase-1
[ebuild R ] sys-apps/openrc-0.9.8.4
[ebuild N ] net-dialup/pptpclient-1.7.2-r2
[ebuild R ] dev-libs/libxml2-2.8.0-r3
[ebuild N ] net-libs/libnfsidmap-0.24
[ebuild N ] app-misc/screen-4.0.3-r6
[ebuild N ] net-dialup/rp-pppoe-3.8-r2
[ebuild N ] net-proxy/tsocks-1.8_beta5-r5
[ebuild R ] dev-libs/openssl-1.0.0j
[ebuild N ] dev-libs/libevent-2.0.20
[ebuild N ] mail-mta/ssmtp-2.64-r2
[ebuild N ] net-misc/ntp-4.2.6_p5-r1
[ebuild N ] virtual/mta-0
[ebuild N ] net-proxy/dante-1.1.19-r4
[ebuild N ] dev-libs/pth-2.0.7-r3
[ebuild N ] app-admin/eselect-pinentry-0.3
[ebuild N ] app-crypt/pinentry-0.8.2
[ebuild N ] net-proxy/ntlmaps-0.9.9-r2
[ebuild R ] sys-apps/portage-2.1.11.31
[ebuild N ] app-text/wgetpaste-2.20-r1
[ebuild R ] dev-libs/libpcre-8.30-r2
[ebuild N ] net-libs/libtirpc-0.2.2-r1
[ebuild NS ] dev-lang/python-2.7.3-r2 [3.2.3-r1]
[ebuild N ] net-misc/curl-7.26.0
[ebuild N ] app-accessibility/brltty-4.2
[ebuild N ] www-client/links-2.7
[ebuild N ] net-nds/rpcbind-0.2.0
[ebuild R ] virtual/udev-171
[ebuild R ] sys-devel/gettext-0.18.1.1-r3
[ebuild R ] sys-apps/util-linux-2.21.2
[ebuild R ] sys-libs/e2fsprogs-libs-1.42
[ebuild R ] dev-libs/popt-1.16-r1
[ebuild R ] sys-apps/attr-2.4.46-r1
[ebuild R ] sys-devel/binutils-2.22-r1
[ebuild N ] dev-libs/libgpg-error-1.10
[ebuild R ] dev-libs/glib-2.32.4-r1
[ebuild N ] dev-util/dialog-1.1.20120706
[ebuild N ] sys-block/eject-2.1.5-r2
[ebuild R ] sys-apps/acl-2.2.51
[ebuild R ] sys-fs/e2fsprogs-1.42
[ebuild N ] dev-libs/libgcrypt-1.5.0-r2
[ebuild N ] sys-fs/lvm2-2.02.88
[ebuild N ] sys-libs/libkudzu-1.2.57.1
[ebuild N ] sys-libs/libcap-2.22
[ebuild N ] dev-libs/libksba-1.2.0
[ebuild N ] dev-libs/libassuan-2.0.3
[ebuild N ] app-admin/syslog-ng-3.2.5
[ebuild N ] app-portage/mirrorselect-2.1.0-r3
[ebuild N ] net-fs/nfs-utils-1.2.3-r1
[ebuild N ] net-irc/irssi-0.8.15-r1
[ebuild N ] sys-fs/mdadm-3.1.4
[ebuild N ] sys-fs/xfsprogs-3.1.8
[ebuild N ] app-misc/livecd-tools-2.0.2
[ebuild R ] virtual/acl-0-r1
[ebuild N ] app-crypt/gnupg-2.0.19
[ebuild N ] net-fs/cifs-utils-5.5-r1
[ebuild N ] sys-apps/hwsetup-1.2-r2
[ebuild N ] sys-block/parted-3.1
[ebuild N ] sys-fs/cryptsetup-1.4.3
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
dev-libs/openssl:0
(dev-libs/openssl-1.0.0j::gentoo, installed) pulled in by
>=dev-libs/openssl-0.9.6d:0[bindist=] required by (net-misc/openssh-5.9_p1-r4::gentoo, installed)
(dev-libs/openssl-1.0.0j::gentoo, ebuild scheduled for merge) pulled in by
dev-libs/openssl[static-libs?] required by (net-misc/curl-7.26.0::gentoo, ebuild scheduled for merge)
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1358, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 208, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1259, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1363, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20121229/.catalyst_lock'
Full build log at /catalyst-auto.22448/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2013-03-09 14:28 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2013-03-09 14:28 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
seedcache in the options of catalyst.conf the source path
will then be /space/catalyst/builds/default/stage3-alpha-20130309.tar.bz2
Caching snapshot to /space/catalyst/snapshot_cache/20130309/
The autoresume path is /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20130309/
Location of the package cache is /space/catalyst/packages/default/livecd-stage1-alpha-20130309/
Location of the kerncache is /space/catalyst/kerncache/default/livecd-stage1-alpha-20130309/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20130309/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20130309/
clearing chroot ...
Emptying directory /space/catalyst/tmp/default/livecd-stage1-alpha-20130309/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage3-alpha-20130309/
to /space/catalyst/tmp/default/livecd-stage1-alpha-20130309/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
Copying livecd-stage1-chroot.sh to ./tmp
copying livecd-stage1-chroot.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20130309/./tmp
copying chroot-functions.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20130309/./tmp
Ensure the file has the executable bit set
Running livecd-stage1-chroot.sh in chroot /space/catalyst/tmp/default/livecd-stage1-alpha-20130309/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps --update sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.1.11.52
>>> Installing (1 of 1) sys-apps/portage-2.1.11.52
emerge --quiet --usepkg --buildpkg --newuse --update --deep --newuse app-accessibility/brltty app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-editors/mg app-misc/screen app-misc/vlock app-portage/mirrorselect app-text/wgetpaste net-analyzer/traceroute net-dialup/mingetty net-dialup/pptpclient net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-proxy/dante net-proxy/ntlmaps net-proxy/tsocks sys-apps/busybox sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/sdparm sys-block/eject sys-block/parted sys-fs/cryptsetup sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/lsscsi sys-fs/lvm2 sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links app-misc/livecd-tools
[ebuild R ] sys-libs/zlib-1.2.7
[ebuild R ] app-arch/bzip2-1.0.6-r3
[ebuild R ] dev-libs/expat-2.1.0-r2
[ebuild R ] app-arch/xz-utils-5.0.4-r1
[ebuild N ] sys-apps/hwdata-gentoo-0.4
[ebuild N ] net-dialup/mingetty-1.08
[ebuild N ] dev-util/boost-build-1.49.0
[ebuild N ] net-analyzer/netselect-0.3-r2
[ebuild N ] dev-libs/eventlog-0.2.12
[ebuild R ] dev-libs/libffi-3.0.11
[ebuild N ] media-libs/libjpeg-turbo-1.2.1
[ebuild N ] app-admin/pwgen-2.06-r1
[ebuild N ] net-analyzer/traceroute-2.0.18
[ebuild N ] net-misc/dhcpcd-5.6.4
[ebuild N ] net-misc/rdate-1.4-r3
[ebuild N ] sys-apps/ethtool-2.6.36
[ebuild N ] sys-apps/hdparm-9.39
[ebuild N ] sys-apps/sdparm-1.07
[ebuild N ] sys-fs/dosfstools-3.0.13
[ebuild N ] sys-fs/lsscsi-0.26
[ebuild N ] sys-fs/reiserfsprogs-3.6.21-r1
[ebuild R ] sys-libs/ncurses-5.9-r2
[ebuild R ] sys-libs/cracklib-2.8.19
[ebuild R ] sys-apps/file-5.11
[ebuild N ] media-libs/libpng-1.5.13-r1
[ebuild N ] virtual/jpeg-0
[ebuild N ] app-arch/unzip-6.0-r3
[ebuild N ] sys-apps/iproute2-2.6.38
[ebuild N ] dev-libs/boost-1.49.0-r2
[ebuild N ] sys-block/thin-provisioning-tools-0.1.5-r1
[ebuild N ] sys-apps/ed-1.6
[ebuild R ] sys-apps/busybox-1.20.2
[ebuild N ] app-misc/vlock-2.2.3
[ebuild N ] net-dialup/ppp-2.4.5-r3
[ebuild N ] net-mail/mailbase-1.1
[ebuild R ] sys-apps/openrc-0.11.8
[ebuild N ] net-dialup/pptpclient-1.7.2-r2
[ebuild N ] net-libs/libnfsidmap-0.24
[ebuild N ] app-misc/screen-4.0.3-r6
[ebuild N ] net-dialup/rp-pppoe-3.8-r2
[ebuild N ] net-proxy/tsocks-1.8_beta5-r5
[ebuild R ] dev-libs/openssl-1.0.1c
[ebuild N ] dev-libs/libevent-2.0.21
[ebuild N ] net-misc/ntp-4.2.6_p5-r1
[ebuild R ] dev-libs/libxml2-2.9.0-r2
[ebuild N ] net-proxy/dante-1.1.19-r4
[ebuild N ] dev-libs/pth-2.0.7-r3
[ebuild N ] app-admin/eselect-pinentry-0.3
[ebuild N ] app-crypt/pinentry-0.8.2
[ebuild N ] net-proxy/ntlmaps-0.9.9-r2
[ebuild R ] sys-apps/portage-2.1.11.52
[ebuild N ] app-text/wgetpaste-2.20-r1
[ebuild R ] dev-libs/libpcre-8.30-r2
[ebuild N ] net-libs/libtirpc-0.2.2-r1
[ebuild NS ] dev-lang/python-2.7.3-r2 [3.2.3-r1]
[ebuild N ] net-misc/curl-7.26.0
[ebuild N ] app-accessibility/brltty-4.2
[ebuild N ] app-editors/mg-20110905
[ebuild N ] www-client/links-2.7
[ebuild N ] net-nds/rpcbind-0.2.0
[ebuild R ] sys-devel/gettext-0.18.1.1-r3
[ebuild R ] sys-apps/util-linux-2.22.2
[ebuild R ] sys-libs/e2fsprogs-libs-1.42
[ebuild R ] dev-libs/popt-1.16-r1
[ebuild R ] sys-apps/attr-2.4.46-r1
[ebuild R ] sys-devel/binutils-2.22-r1
[ebuild R ] dev-libs/libgpg-error-1.10
[ebuild R ] dev-libs/glib-2.32.4-r1
[ebuild N ] dev-util/dialog-1.2.20121230
[ebuild N ] mail-mta/msmtp-1.4.30-r1
[ebuild R ] sys-apps/acl-2.2.51
[ebuild R ] sys-fs/e2fsprogs-1.42
[ebuild R ] dev-libs/libgcrypt-1.5.0-r2
[ebuild N ] sys-libs/libcap-2.22
[ebuild N ] dev-libs/libksba-1.3.0
[ebuild N ] dev-libs/libassuan-2.0.3
[ebuild N ] virtual/mta-1
[ebuild N ] app-admin/syslog-ng-3.2.5
[ebuild N ] app-portage/mirrorselect-2.1.0-r3
[ebuild N ] net-fs/nfs-utils-1.2.6
[ebuild N ] net-irc/irssi-0.8.15-r1
[ebuild N ] sys-block/eject-2.1.5-r2
[ebuild N ] sys-fs/mdadm-3.1.4
[ebuild N ] sys-fs/xfsprogs-3.1.8
[ebuild R ] virtual/acl-0-r1
[ebuild R ] dev-libs/libxslt-1.1.28
[ebuild N ] app-crypt/gnupg-2.0.19
[ebuild N ] net-fs/cifs-utils-5.6-r1
[ebuild N ] sys-block/parted-3.1
[ebuild R ] sys-apps/kmod-12-r1
[ebuild R ] sys-fs/udev-197-r8
[ebuild R ] virtual/udev-197-r1
[ebuild N ] sys-fs/lvm2-2.02.97-r1
[ebuild N ] sys-apps/hwids-20130302
[ebuild N ] sys-apps/pciutils-3.1.10
[ebuild N ] sys-fs/cryptsetup-1.4.3
[ebuild N ] sys-libs/libkudzu-1.2.57.1
[ebuild N ] app-misc/livecd-tools-2.0.2
[ebuild N ] sys-apps/hwsetup-1.2-r2
[blocks B ] sys-block/eject ("sys-block/eject" is blocking sys-apps/util-linux-2.22.2)
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
(sys-block/eject-2.1.5-r2::gentoo, ebuild scheduled for merge) pulled in by
sys-block/eject
(sys-apps/util-linux-2.22.2::gentoo, ebuild scheduled for merge) pulled in by
>=sys-apps/util-linux-2.17.2 required by (sys-fs/cryptsetup-1.4.3::gentoo, ebuild scheduled for merge)
>=sys-apps/util-linux-2.16 required by (sys-fs/mdadm-3.1.4::gentoo, ebuild scheduled for merge)
>=sys-apps/util-linux-2.17.2 required by (sys-fs/xfsprogs-3.1.8::gentoo, ebuild scheduled for merge)
>=sys-apps/util-linux-2.16 required by (sys-fs/lvm2-2.02.97-r1::gentoo, ebuild scheduled for merge)
>=sys-apps/util-linux-2.16 required by (sys-fs/e2fsprogs-1.42::gentoo, ebuild scheduled for merge)
>=sys-apps/util-linux-2.17.2[static-libs(+)] required by (sys-fs/cryptsetup-1.4.3::gentoo, ebuild scheduled for merge)
sys-apps/util-linux required by @system
>=sys-apps/util-linux-2.20 required by (sys-fs/udev-197-r8::gentoo, ebuild scheduled for merge)
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1389, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 214, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1290, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1394, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20130309/.catalyst_lock'
Full build log at /tmp/catalyst-auto.16842/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2013-03-16 14:06 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2013-03-16 14:06 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /space/catalyst/builds/default/stage3-alpha-20130316.tar.bz2
Caching snapshot to /space/catalyst/snapshot_cache/20130316/
The autoresume path is /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20130316/
Location of the package cache is /space/catalyst/packages/default/livecd-stage1-alpha-20130316/
Location of the kerncache is /space/catalyst/kerncache/default/livecd-stage1-alpha-20130316/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20130316/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20130316/
clearing chroot ...
Emptying directory /space/catalyst/tmp/default/livecd-stage1-alpha-20130316/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage3-alpha-20130316/
to /space/catalyst/tmp/default/livecd-stage1-alpha-20130316/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
Copying livecd-stage1-chroot.sh to ./tmp
copying livecd-stage1-chroot.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20130316/./tmp
copying chroot-functions.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20130316/./tmp
Ensure the file has the executable bit set
Running livecd-stage1-chroot.sh in chroot /space/catalyst/tmp/default/livecd-stage1-alpha-20130316/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps --update sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.1.11.52
>>> Installing (1 of 1) sys-apps/portage-2.1.11.52
emerge --quiet --usepkg --buildpkg --newuse --update --deep --newuse app-accessibility/brltty app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-editors/mg app-misc/screen app-misc/vlock app-portage/mirrorselect app-text/wgetpaste net-analyzer/traceroute net-dialup/mingetty net-dialup/pptpclient net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-proxy/dante net-proxy/ntlmaps net-proxy/tsocks sys-apps/busybox sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/sdparm sys-block/eject sys-block/parted sys-fs/cryptsetup sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/lsscsi sys-fs/lvm2 sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links app-misc/livecd-tools
[ebuild R ] sys-libs/zlib-1.2.7
[ebuild R ] app-arch/bzip2-1.0.6-r3
[ebuild R ] dev-libs/expat-2.1.0-r2
[ebuild R ] app-arch/xz-utils-5.0.4-r1
[ebuild N ] sys-apps/hwdata-gentoo-0.4
[ebuild N ] net-dialup/mingetty-1.08
[ebuild N ] dev-util/boost-build-1.49.0
[ebuild N ] net-analyzer/netselect-0.3-r2
[ebuild N ] dev-libs/eventlog-0.2.12
[ebuild R ] dev-libs/libffi-3.0.11
[ebuild N ] media-libs/libjpeg-turbo-1.2.1
[ebuild N ] app-admin/pwgen-2.06-r1
[ebuild N ] net-analyzer/traceroute-2.0.18
[ebuild N ] net-misc/dhcpcd-5.6.4
[ebuild N ] net-misc/rdate-1.4-r3
[ebuild N ] sys-apps/ethtool-2.6.36
[ebuild N ] sys-apps/hdparm-9.39
[ebuild N ] sys-apps/sdparm-1.07
[ebuild N ] sys-fs/dosfstools-3.0.13
[ebuild N ] sys-fs/lsscsi-0.26
[ebuild N ] sys-fs/reiserfsprogs-3.6.21-r1
[ebuild R ] sys-libs/ncurses-5.9-r2
[ebuild R ] sys-libs/cracklib-2.8.19
[ebuild R ] sys-apps/file-5.11
[ebuild N ] media-libs/libpng-1.5.13-r1
[ebuild N ] virtual/jpeg-0
[ebuild N ] app-arch/unzip-6.0-r3
[ebuild N ] sys-apps/iproute2-2.6.38
[ebuild N ] dev-libs/boost-1.49.0-r2
[ebuild N ] sys-block/thin-provisioning-tools-0.1.5-r1
[ebuild R ] sys-apps/busybox-1.20.2
[ebuild N ] app-misc/vlock-2.2.3
[ebuild N ] net-dialup/ppp-2.4.5-r3
[ebuild N ] net-mail/mailbase-1.1
[ebuild R ] sys-apps/openrc-0.11.8
[ebuild N ] net-dialup/pptpclient-1.7.2-r2
[ebuild N ] net-libs/libnfsidmap-0.24
[ebuild N ] app-misc/screen-4.0.3-r6
[ebuild N ] net-dialup/rp-pppoe-3.8-r2
[ebuild N ] net-proxy/tsocks-1.8_beta5-r5
[ebuild R ] dev-libs/openssl-1.0.1c
[ebuild N ] dev-libs/libevent-2.0.21
[ebuild N ] net-misc/ntp-4.2.6_p5-r1
[ebuild R ] dev-libs/libxml2-2.9.0-r2
[ebuild N ] net-proxy/dante-1.1.19-r4
[ebuild N ] dev-libs/pth-2.0.7-r3
[ebuild N ] app-admin/eselect-pinentry-0.3
[ebuild N ] app-crypt/pinentry-0.8.2
[ebuild N ] net-proxy/ntlmaps-0.9.9-r2
[ebuild R ] sys-apps/portage-2.1.11.52
[ebuild N ] app-text/wgetpaste-2.20-r1
[ebuild R ] dev-libs/libpcre-8.30-r2
[ebuild N ] net-libs/libtirpc-0.2.2-r1
[ebuild NS ] dev-lang/python-2.7.3-r2 [3.2.3-r1]
[ebuild N ] net-misc/curl-7.29.0-r1
[ebuild N ] app-accessibility/brltty-4.2
[ebuild N ] app-editors/mg-20110905
[ebuild N ] www-client/links-2.7
[ebuild N ] net-nds/rpcbind-0.2.0
[ebuild R ] sys-devel/gettext-0.18.1.1-r3
[ebuild R ] sys-apps/util-linux-2.22.2
[ebuild R ] sys-libs/e2fsprogs-libs-1.42
[ebuild R ] dev-libs/popt-1.16-r1
[ebuild R ] sys-apps/attr-2.4.46-r1
[ebuild R ] sys-devel/binutils-2.22-r1
[ebuild R ] dev-libs/libgpg-error-1.10
[ebuild R ] dev-libs/glib-2.32.4-r1
[ebuild N ] dev-util/dialog-1.2.20121230
[ebuild N ] mail-mta/msmtp-1.4.30-r1
[ebuild R ] sys-apps/acl-2.2.51
[ebuild R ] sys-fs/e2fsprogs-1.42
[ebuild R ] dev-libs/libgcrypt-1.5.0-r2
[ebuild N ] sys-libs/libcap-2.22
[ebuild N ] dev-libs/libksba-1.3.0
[ebuild N ] dev-libs/libassuan-2.0.3
[ebuild N ] virtual/mta-1
[ebuild N ] app-admin/syslog-ng-3.2.5
[ebuild N ] app-portage/mirrorselect-2.1.0-r3
[ebuild N ] net-fs/nfs-utils-1.2.6
[ebuild N ] net-irc/irssi-0.8.15-r1
[ebuild N ] sys-block/eject-2.1.5-r2
[ebuild N ] sys-fs/mdadm-3.1.4
[ebuild N ] sys-fs/xfsprogs-3.1.8
[ebuild R ] virtual/acl-0-r1
[ebuild R ] dev-libs/libxslt-1.1.28
[ebuild N ] app-crypt/gnupg-2.0.19
[ebuild N ] net-fs/cifs-utils-5.6-r1
[ebuild N ] sys-block/parted-3.1
[ebuild R ] sys-apps/kmod-12-r1
[ebuild R ] sys-fs/udev-197-r8
[ebuild R ] virtual/udev-197-r1
[ebuild N ] sys-fs/lvm2-2.02.97-r1
[ebuild N ] sys-apps/hwids-20130302
[ebuild N ] sys-apps/pciutils-3.1.10
[ebuild N ] sys-fs/cryptsetup-1.4.3
[ebuild N ] sys-libs/libkudzu-1.2.57.1
[ebuild N ] app-misc/livecd-tools-2.0.2
[ebuild N ] sys-apps/hwsetup-1.2-r2
[blocks B ] sys-block/eject ("sys-block/eject" is blocking sys-apps/util-linux-2.22.2)
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
(sys-block/eject-2.1.5-r2::gentoo, ebuild scheduled for merge) pulled in by
sys-block/eject
(sys-apps/util-linux-2.22.2::gentoo, ebuild scheduled for merge) pulled in by
>=sys-apps/util-linux-2.17.2 required by (sys-fs/cryptsetup-1.4.3::gentoo, ebuild scheduled for merge)
>=sys-apps/util-linux-2.16 required by (sys-fs/mdadm-3.1.4::gentoo, ebuild scheduled for merge)
>=sys-apps/util-linux-2.17.2 required by (sys-fs/xfsprogs-3.1.8::gentoo, ebuild scheduled for merge)
>=sys-apps/util-linux-2.16 required by (sys-fs/lvm2-2.02.97-r1::gentoo, ebuild scheduled for merge)
>=sys-apps/util-linux-2.16 required by (sys-fs/e2fsprogs-1.42::gentoo, ebuild scheduled for merge)
>=sys-apps/util-linux-2.17.2[static-libs(+)] required by (sys-fs/cryptsetup-1.4.3::gentoo, ebuild scheduled for merge)
sys-apps/util-linux required by @system
>=sys-apps/util-linux-2.20 required by (sys-fs/udev-197-r8::gentoo, ebuild scheduled for merge)
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1389, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 214, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1290, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1394, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20130316/.catalyst_lock'
Full build log at /tmp/catalyst-auto.31548/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2013-12-21 22:01 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2013-12-21 22:01 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
/var/tmp/portage/net-libs/libnfsidmap-0.24/work/libnfsidmap-0.24/missing: Unknown `--is-lightweight' option
Try `/var/tmp/portage/net-libs/libnfsidmap-0.24/work/libnfsidmap-0.24/missing --help' for more information
configure: WARNING: 'missing' script is too old or missing
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking build system type... alpha-unknown-linux-gnu
checking host system type... alpha-unknown-linux-gnu
checking how to print strings... printf
checking for style of include used by make... GNU
checking for alpha-unknown-linux-gnu-gcc... alpha-unknown-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether alpha-unknown-linux-gnu-gcc accepts -g... yes
checking for alpha-unknown-linux-gnu-gcc option to accept ISO C89... none needed
checking dependency style of alpha-unknown-linux-gnu-gcc... none
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by alpha-unknown-linux-gnu-gcc... /usr/alpha-unknown-linux-gnu/bin/ld
checking if the linker (/usr/alpha-unknown-linux-gnu/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/alpha-unknown-linux-gnu-nm -B
checking the name lister (/usr/bin/alpha-unknown-linux-gnu-nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert alpha-unknown-linux-gnu file names to alpha-unknown-linux-gnu format... func_convert_file_noop
checking how to convert alpha-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/alpha-unknown-linux-gnu/bin/ld option to reload object files... -r
checking for alpha-unknown-linux-gnu-objdump... alpha-unknown-linux-gnu-objdump
checking how to recognize dependent libraries... pass_all
checking for alpha-unknown-linux-gnu-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s
checking for alpha-unknown-linux-gnu-ar... alpha-unknown-linux-gnu-ar
checking for archiver @FILE support... @
checking for alpha-unknown-linux-gnu-strip... alpha-unknown-linux-gnu-strip
checking for alpha-unknown-linux-gnu-ranlib... alpha-unknown-linux-gnu-ranlib
checking command to parse /usr/bin/alpha-unknown-linux-gnu-nm -B output from alpha-unknown-linux-gnu-gcc object... ok
checking for sysroot... no
checking for alpha-unknown-linux-gnu-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... alpha-unknown-linux-gnu-gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if alpha-unknown-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no
checking for alpha-unknown-linux-gnu-gcc option to produce PIC... -fPIC -DPIC
checking if alpha-unknown-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes
checking if alpha-unknown-linux-gnu-gcc static flag -static works... yes
checking if alpha-unknown-linux-gnu-gcc supports -c -o file.o... yes
checking if alpha-unknown-linux-gnu-gcc supports -c -o file.o... (cached) yes
checking whether the alpha-unknown-linux-gnu-gcc linker (/usr/alpha-unknown-linux-gnu/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for alpha-unknown-linux-gnu-gcc... (cached) alpha-unknown-linux-gnu-gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether alpha-unknown-linux-gnu-gcc accepts -g... (cached) yes
checking for alpha-unknown-linux-gnu-gcc option to accept ISO C89... (cached) none needed
checking dependency style of alpha-unknown-linux-gnu-gcc... (cached) none
checking for ANSI C header files... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking for uid_t in sys/types.h... yes
checking for size_t... yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for strchr... yes
checking for strdup... yes
checking for getgrouplist... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating libnfsidmap.pc
config.status: executing depfiles commands
config.status: executing libtool commands
/bin/sh ./libtool --tag=CC --mode=compile alpha-unknown-linux-gnu-gcc -DPACKAGE_NAME=\"libnfsidmap\" -DPACKAGE_TARNAME=\"libnfsidmap\" -DPACKAGE_VERSION=\"0.24\" -DPACKAGE_STRING=\"libnfsidmap\ 0.24\" -DPACKAGE_BUGREPORT=\"linux-nfs@vger.kernel.org\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libnfsidmap\" -DVERSION=\"0.24\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DSTDC_HEADERS=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_ERRNO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_STRCHR=1 -DHAVE_STRDUP=1 -DHAVE_GETGROUPLIST=1 -I. -DPATH_PLUGINS=\"/usr/lib/libnfsidmap\" -mieee -pipe -O2 -mcpu=ev4 -c -o libnfsidmap_la-libnfsidmap.lo `test -f 'libnfsidmap.c' || echo './'`libnfsidmap.c
/bin/sh ./libtool --tag=CC --mode=compile alpha-unknown-linux-gnu-gcc -DPACKAGE_NAME=\"libnfsidmap\" -DPACKAGE_TARNAME=\"libnfsidmap\" -DPACKAGE_VERSION=\"0.24\" -DPACKAGE_STRING=\"libnfsidmap\ 0.24\" -DPACKAGE_BUGREPORT=\"linux-nfs@vger.kernel.org\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libnfsidmap\" -DVERSION=\"0.24\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DSTDC_HEADERS=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_ERRNO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_STRCHR=1 -DHAVE_STRDUP=1 -DHAVE_GETGROUPLIST=1 -I. -DPATH_PLUGINS=\"/usr/lib/libnfsidmap\" -mieee -pipe -O2 -mcpu=ev4 -c -o libnfsidmap_la-cfg.lo `test -f 'cfg.c' || echo './'`cfg.c
/bin/sh ./libtool --tag=CC --mode=compile alpha-unknown-linux-gnu-gcc -DPACKAGE_NAME=\"libnfsidmap\" -DPACKAGE_TARNAME=\"libnfsidmap\" -DPACKAGE_VERSION=\"0.24\" -DPACKAGE_STRING=\"libnfsidmap\ 0.24\" -DPACKAGE_BUGREPORT=\"linux-nfs@vger.kernel.org\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libnfsidmap\" -DVERSION=\"0.24\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DSTDC_HEADERS=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_ERRNO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_STRCHR=1 -DHAVE_STRDUP=1 -DHAVE_GETGROUPLIST=1 -I. -DPATH_PLUGINS=\"/usr/lib/libnfsidmap\" -mieee -pipe -O2 -mcpu=ev4 -c -o libnfsidmap_la-strlcpy.lo `test -f 'strlcpy.c' || echo './'`strlcpy.c
/bin/sh ./libtool --tag=CC --mode=compile alpha-unknown-linux-gnu-gcc -DPACKAGE_NAME=\"libnfsidmap\" -DPACKAGE_TARNAME=\"libnfsidmap\" -DPACKAGE_VERSION=\"0.24\" -DPACKAGE_STRING=\"libnfsidmap\ 0.24\" -DPACKAGE_BUGREPORT=\"linux-nfs@vger.kernel.org\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libnfsidmap\" -DVERSION=\"0.24\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DSTDC_HEADERS=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_ERRNO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_STRCHR=1 -DHAVE_STRDUP=1 -DHAVE_GETGROUPLIST=1 -I. -mieee -pipe -O2 -mcpu=ev4 -c -o nss.lo nss.c
libtool: compile: alpha-unknown-linux-gnu-gcc -DPACKAGE_NAME=\"libnfsidmap\" -DPACKAGE_TARNAME=\"libnfsidmap\" -DPACKAGE_VERSION=\"0.24\" "-DPACKAGE_STRING=\"libnfsidmap 0.24\"" -DPACKAGE_BUGREPORT=\"linux-nfs@vger.kernel.org\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libnfsidmap\" -DVERSION=\"0.24\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DSTDC_HEADERS=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_ERRNO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_STRCHR=1 -DHAVE_STRDUP=1 -DHAVE_GETGROUPLIST=1 -I. -DPATH_PLUGINS=\"/usr/lib/libnfsidmap\" -mieee -pipe -O2 -mcpu=ev4 -c libnfsidmap.c -fPIC -DPIC -o .libs/libnfsidmap_la-libnfsidmap.o
libtool: compile: alpha-unknown-linux-gnu-gcc -DPACKAGE_NAME=\"libnfsidmap\" -DPACKAGE_TARNAME=\"libnfsidmap\" -DPACKAGE_VERSION=\"0.24\" "-DPACKAGE_STRING=\"libnfsidmap 0.24\"" -DPACKAGE_BUGREPORT=\"linux-nfs@vger.kernel.org\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libnfsidmap\" -DVERSION=\"0.24\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DSTDC_HEADERS=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_ERRNO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_STRCHR=1 -DHAVE_STRDUP=1 -DHAVE_GETGROUPLIST=1 -I. -DPATH_PLUGINS=\"/usr/lib/libnfsidmap\" -mieee -pipe -O2 -mcpu=ev4 -c strlcpy.c -fPIC -DPIC -o .libs/libnfsidmap_la-strlcpy.o
libtool: compile: alpha-unknown-linux-gnu-gcc -DPACKAGE_NAME=\"libnfsidmap\" -DPACKAGE_TARNAME=\"libnfsidmap\" -DPACKAGE_VERSION=\"0.24\" "-DPACKAGE_STRING=\"libnfsidmap 0.24\"" -DPACKAGE_BUGREPORT=\"linux-nfs@vger.kernel.org\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libnfsidmap\" -DVERSION=\"0.24\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DSTDC_HEADERS=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_ERRNO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_STRCHR=1 -DHAVE_STRDUP=1 -DHAVE_GETGROUPLIST=1 -I. -DPATH_PLUGINS=\"/usr/lib/libnfsidmap\" -mieee -pipe -O2 -mcpu=ev4 -c cfg.c -fPIC -DPIC -o .libs/libnfsidmap_la-cfg.o
libtool: compile: alpha-unknown-linux-gnu-gcc -DPACKAGE_NAME=\"libnfsidmap\" -DPACKAGE_TARNAME=\"libnfsidmap\" -DPACKAGE_VERSION=\"0.24\" "-DPACKAGE_STRING=\"libnfsidmap 0.24\"" -DPACKAGE_BUGREPORT=\"linux-nfs@vger.kernel.org\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libnfsidmap\" -DVERSION=\"0.24\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DSTDC_HEADERS=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_ERRNO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_STRCHR=1 -DHAVE_STRDUP=1 -DHAVE_GETGROUPLIST=1 -I. -mieee -pipe -O2 -mcpu=ev4 -c nss.c -fPIC -DPIC -o .libs/nss.o
In file included from nss.c:53:0:
getgrouplist.c:35:20: fatal error: config.h: No such file or directorylibtool: compile: alpha-unknown-linux-gnu-gcc -DPACKAGE_NAME=\"libnfsidmap\" -DPACKAGE_TARNAME=\"libnfsidmap\" -DPACKAGE_VERSION=\"0.24\" "-DPACKAGE_STRING=\"libnfsidmap 0.24\"" -DPACKAGE_BUGREPORT=\"linux-nfs@vger.kernel.org\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libnfsidmap\" -DVERSION=\"0.24\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DSTDC_HEADERS=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_ERRNO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_STRCHR=1 -DHAVE_STRDUP=1 -DHAVE_GETGROUPLIST=1 -I. -DPATH_PLUGINS=\"/usr/lib/libnfsidmap\" -mieee -pipe -O2 -mcpu=ev4 -c strlcpy.c -o libnfsidmap_la-strlcpy.o >/dev/null 2>&1
compilation terminated.
make: *** [nss.lo] Error 1
make: *** Waiting for unfinished jobs....
libtool: compile: alpha-unknown-linux-gnu-gcc -DPACKAGE_NAME=\"libnfsidmap\" -DPACKAGE_TARNAME=\"libnfsidmap\" -DPACKAGE_VERSION=\"0.24\" "-DPACKAGE_STRING=\"libnfsidmap 0.24\"" -DPACKAGE_BUGREPORT=\"linux-nfs@vger.kernel.org\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libnfsidmap\" -DVERSION=\"0.24\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DSTDC_HEADERS=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_ERRNO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_STRCHR=1 -DHAVE_STRDUP=1 -DHAVE_GETGROUPLIST=1 -I. -DPATH_PLUGINS=\"/usr/lib/libnfsidmap\" -mieee -pipe -O2 -mcpu=ev4 -c libnfsidmap.c -o libnfsidmap_la-libnfsidmap.o >/dev/null 2>&1
libtool: compile: alpha-unknown-linux-gnu-gcc -DPACKAGE_NAME=\"libnfsidmap\" -DPACKAGE_TARNAME=\"libnfsidmap\" -DPACKAGE_VERSION=\"0.24\" "-DPACKAGE_STRING=\"libnfsidmap 0.24\"" -DPACKAGE_BUGREPORT=\"linux-nfs@vger.kernel.org\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libnfsidmap\" -DVERSION=\"0.24\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DSTDC_HEADERS=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_ERRNO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_STRCHR=1 -DHAVE_STRDUP=1 -DHAVE_GETGROUPLIST=1 -I. -DPATH_PLUGINS=\"/usr/lib/libnfsidmap\" -mieee -pipe -O2 -mcpu=ev4 -c cfg.c -o libnfsidmap_la-cfg.o >/dev/null 2>&1
emake failed
* ERROR: net-libs/libnfsidmap-0.24::gentoo failed (compile phase):
* emake failed
*
* Call stack:
* ebuild.sh, line 93: Called src_compile
* environment, line 3001: Called __eapi2_src_compile
* phase-helpers.sh, line 688: Called die
* The specific snippet of code:
* emake || die "emake failed"
*
* If you need support, post the output of `emerge --info '=net-libs/libnfsidmap-0.24::gentoo'`,
* the complete build log and the output of `emerge -pqv '=net-libs/libnfsidmap-0.24::gentoo'`.
* The complete build log is located at '/var/tmp/portage/net-libs/libnfsidmap-0.24/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/net-libs/libnfsidmap-0.24/temp/environment'.
* Working directory: '/var/tmp/portage/net-libs/libnfsidmap-0.24/work/libnfsidmap-0.24'
* S: '/var/tmp/portage/net-libs/libnfsidmap-0.24/work/libnfsidmap-0.24'
* Messages for package sys-apps/busybox-1.21.0:
* Could not locate user configfile, so we will save a default one
* You cannot have USE='static pam'. Assuming static is more important.
* Your configuration for sys-apps/busybox-1.21.0 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.21.0 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package net-dialup/ppp-2.4.5-r3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Pon, poff and plog scripts have been supplied for experienced users.
* Users needing particular scripts (ssh,rsh,etc.) should check out the
* /usr/share/doc/ppp-2.4.5-r3/scripts directory.
* Messages for package net-libs/libnfsidmap-0.24:
* ERROR: net-libs/libnfsidmap-0.24::gentoo failed (compile phase):
* emake failed
*
* Call stack:
* ebuild.sh, line 93: Called src_compile
* environment, line 3001: Called __eapi2_src_compile
* phase-helpers.sh, line 688: Called die
* The specific snippet of code:
* emake || die "emake failed"
*
* If you need support, post the output of `emerge --info '=net-libs/libnfsidmap-0.24::gentoo'`,
* the complete build log and the output of `emerge -pqv '=net-libs/libnfsidmap-0.24::gentoo'`.
* The complete build log is located at '/var/tmp/portage/net-libs/libnfsidmap-0.24/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/net-libs/libnfsidmap-0.24/temp/environment'.
* Working directory: '/var/tmp/portage/net-libs/libnfsidmap-0.24/work/libnfsidmap-0.24'
* S: '/var/tmp/portage/net-libs/libnfsidmap-0.24/work/libnfsidmap-0.24'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1394, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1295, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1399, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20131221/.catalyst_lock'
Full build log at /tmp/catalyst-auto.29060/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2014-08-09 19:09 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2014-08-09 19:09 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
from ./persistent-data/data-structures/btree.h:23,
from ./persistent-data/data-structures/array.h:23,
from persistent-data/data-structures/bitset.cc:1:
/usr/include/boost/cstdint.hpp:311:42: error: typedef boost::ulong_long_type boost::uint64_t
persistent-data/data-structures/bitset.cc:68:14: error: expected ';' before 'w'
persistent-data/data-structures/bitset.cc:70:6: error: 'w' was not declared in this scope
persistent-data/data-structures/bitset.cc:70:27: error: 'set_bit' was not declared in this scope
persistent-data/data-structures/bitset.cc:72:6: error: 'w' was not declared in this scope
persistent-data/data-structures/bitset.cc:72:29: error: 'clear_bit' was not declared in this scope
persistent-data/data-structures/bitset.cc:73:12: error: 'class persistent_data::array<{anonymous}::bitset_traits>' has no member named 'set'
persistent-data/data-structures/bitset.cc:73:25: error: 'w' was not declared in this scope
persistent-data/data-structures/bitset.cc: In member function 'void persistent_data::bitset_detail::bitset_impl::pad_last_block(bool)':
persistent-data/data-structures/bitset.cc:129:6: error: reference to 'uint64_t' is ambiguous
In file included from /usr/lib/gcc/alpha-unknown-linux-gnu/4.7.3/include/stdint.h:3:0,
from ./persistent-data/endian_utils.h:23,
from ./persistent-data/data-structures/btree.h:22,
from ./persistent-data/data-structures/array.h:23,
from persistent-data/data-structures/bitset.cc:1:
/usr/include/stdint.h:55:27: error: candidates are: typedef long unsigned int uint64_t
In file included from /usr/include/boost/intrusive/detail/utilities.hpp:25:0,
from /usr/include/boost/intrusive/rbtree_algorithms.hpp:57,
from ./persistent-data/cache.h:25,
from ./persistent-data/block.h:23,
from ./persistent-data/transaction_manager.h:22,
from ./persistent-data/data-structures/btree.h:23,
from ./persistent-data/data-structures/array.h:23,
from persistent-data/data-structures/bitset.cc:1:
/usr/include/boost/cstdint.hpp:311:42: error: typedef boost::ulong_long_type boost::uint64_t
persistent-data/data-structures/bitset.cc:129:15: error: expected ';' before 'w'
persistent-data/data-structures/bitset.cc:133:8: error: 'w' was not declared in this scope
persistent-data/data-structures/bitset.cc:133:24: error: 'set_bit' was not declared in this scope
persistent-data/data-structures/bitset.cc:135:8: error: 'w' was not declared in this scope
persistent-data/data-structures/bitset.cc:135:26: error: 'clear_bit' was not declared in this scope
persistent-data/data-structures/bitset.cc:137:13: error: 'class persistent_data::array<{anonymous}::bitset_traits>' has no member named 'set'
persistent-data/data-structures/bitset.cc:137:26: error: 'w' was not declared in this scope
persistent-data/data-structures/bitset.cc: In member function 'void persistent_data::bitset_detail::bitset_impl::resize_array(unsigned int, bool)':
persistent-data/data-structures/bitset.cc:149:13: error: 'class persistent_data::array<{anonymous}::bitset_traits>' has no member named 'grow'
persistent-data/data-structures/bitset.cc: In member function 'bool persistent_data::bitset_detail::bitset_impl::get_bit(int, unsigned int) const':
persistent-data/data-structures/bitset.cc:165:24: error: 'mask' was not declared in this scope
In file included from ./persistent-data/data-structures/btree.h:22:0,
from ./persistent-data/data-structures/array.h:23,
from persistent-data/data-structures/bitset.cc:1:
./persistent-data/endian_utils.h: In instantiation of 'DiskType base::to_disk(const CPUType&) [with DiskType = base::le64; CPUType = int]':
persistent-data/data-structures/bitset.cc:23:42: required from here
./persistent-data/endian_utils.h:68:1: error: invalid application of 'sizeof' to incomplete type 'boost::STATIC_ASSERTION_FAILURE<false>'
./persistent-data/endian_utils.h:69:2: warning: no return statement in function returning non-void [-Wreturn-type]
In file included from ./persistent-data/data-structures/array.h:25:0,
from persistent-data/data-structures/bitset.cc:1:
./persistent-data/data-structures/array_block.h: In instantiation of 'class persistent_data::array_block<{anonymous}::bitset_traits, persistent_data::block_manager<>::read_ref>':
./persistent-data/data-structures/array.h:218:56: required from 'persistent_data::array<ValueTraits>::array(persistent_data::array<ValueTraits>::tm_ptr, persistent_data::array<ValueTraits>::ref_counter) [with ValueTraits = {anonymous}::bitset_traits; persistent_data::array<ValueTraits>::tm_ptr = boost::shared_ptr<persistent_data::transaction_manager>; persistent_data::array<ValueTraits>::ref_counter = int]'
persistent-data/data-structures/bitset.cc:37:20: required from here
./persistent-data/data-structures/array_block.h:41:44: error: no type named 'value_type' in 'struct {anonymous}::bitset_traits'
[CXX] persistent-data/space-maps/recursive.cc
In file included from persistent-data/data-structures/bitset.cc:1:0:
./persistent-data/data-structures/array.h: In instantiation of 'void persistent_data::array<ValueTraits>::visit_value(ValueVisitor&, const btree_path&, const typename persistent_data::array<ValueTraits>::block_traits::value_type&) const [with ValueVisitor = persistent_data::bitset_detail::bitset_impl::bit_visitor; ValueTraits = {anonymous}::bitset_traits; persistent_data::btree_detail::btree_path = std::vector<long unsigned int>; typename persistent_data::array<ValueTraits>::block_traits::value_type = long unsigned int]':
./persistent-data/data-structures/array.h:154:5: required from 'void persistent_data::array<ValueTraits>::block_value_visitor<ValueVisitor>::visit(const btree_path&, const typename persistent_data::array<ValueTraits>::block_traits::value_type&) [with ValueVisitor = persistent_data::bitset_detail::bitset_impl::bit_visitor; ValueTraits = {anonymous}::bitset_traits; persistent_data::btree_detail::btree_path = std::vector<long unsigned int>; typename persistent_data::array<ValueTraits>::block_traits::value_type = long unsigned int]'
./persistent-data/data-structures/btree_damage_visitor.h:198:6: required from 'void persistent_data::btree_detail::btree_damage_visitor<ValueVisitor, DamageVisitor, Levels, ValueTraits>::visit_values(const btree_path&, const persistent_data::btree_detail::node_ref<ValueTraits>&) [with ValueVisitor = persistent_data::array<{anonymous}::bitset_traits>::block_value_visitor<persistent_data::bitset_detail::bitset_impl::bit_visitor>; DamageVisitor = persistent_data::array<{anonymous}::bitset_traits>::block_damage_visitor<persistent_data::bitset_detail::bitset_impl::damage_visitor>; unsigned int Levels = 1u; ValueTraits = persistent_data::array<{anonymous}::bitset_traits>::block_traits; persistent_data::btree_detail::btree_path = std::vector<long unsigned int>]'
./persistent-data/data-structures/btree_damage_visitor.h:174:5: required from 'bool persistent_data::btree_detail::btree_damage_visitor<ValueVisitor, DamageVisitor, Levels, ValueTraits>::visit_leaf(const node_location&, const persistent_data::btree_detail::node_ref<ValueTraits>&) [with ValueVisitor = persistent_data::array<{anonymous}::bitset_traits>::block_value_visitor<persistent_data::bitset_detail::bitset_impl::bit_visitor>; DamageVisitor = persistent_data::array<{anonymous}::bitset_traits>::block_damage_visitor<persistent_data::bitset_detail::bitset_impl::damage_visitor>; unsigned int Levels = 1u; ValueTraits = persistent_data::array<{anonymous}::bitset_traits>::block_traits; persistent_data::btree_detail::btree_damage_visitor<ValueVisitor, DamageVisitor, Levels, ValueTraits>::node_location = persistent_data::btree_detail::node_location]'
persistent-data/data-structures/bitset.cc:251:1: required from here
./persistent-data/data-structures/array.h:169:5: error: 'persistent_data::array<{anonymous}::bitset_traits>::rblock' has no member named 'get'
In file included from ./persistent-data/data-structures/array.h:25:0,
from persistent-data/data-structures/bitset.cc:1:
./persistent-data/data-structures/array_block.h: In instantiation of 'void persistent_data::array_block<ValueTraits, RefType>::dec_all_entries() [with ValueTraits = {anonymous}::bitset_traits; RefType = persistent_data::block_manager<>::read_ref]':
./persistent-data/data-structures/array.h:389:4: required from 'void persistent_data::array<ValueTraits>::dec_ablock_entries(persistent_data::block_address) [with ValueTraits = {anonymous}::bitset_traits; persistent_data::block_address = long unsigned int]'
./persistent-data/data-structures/array.h:123:5: required from 'void persistent_data::array<ValueTraits>::block_ref_counter::dec_values(uint64_t) [with ValueTraits = {anonymous}::bitset_traits; uint64_t = long unsigned int]'
./persistent-data/data-structures/array.h:108:6: required from 'void persistent_data::array<ValueTraits>::block_ref_counter::set(uint64_t, uint32_t) [with ValueTraits = {anonymous}::bitset_traits; uint64_t = long unsigned int; uint32_t = unsigned int]'
persistent-data/data-structures/bitset.cc:251:1: required from here
./persistent-data/data-structures/array_block.h:129:5: error: request for member 'dec' in '((persistent_data::array_block<{anonymous}::bitset_traits, persistent_data::block_manager<>::read_ref>*)this)->persistent_data::array_block<{anonymous}::bitset_traits, persistent_data::block_manager<>::read_ref>::rc_', which is of non-class type 'persistent_data::array_block<{anonymous}::bitset_traits, persistent_data::block_manager<>::read_ref>::ref_counter {aka int}'
./persistent-data/data-structures/array_block.h:129:5: error: no matching function for call to 'get(unsigned int&)'
./persistent-data/data-structures/array_block.h:129:5: note: candidates are:
In file included from /usr/include/boost/optional.hpp:15:0,
from ./persistent-data/buffer.h:27,
from ./persistent-data/block.h:22,
from ./persistent-data/transaction_manager.h:22,
from ./persistent-data/data-structures/btree.h:23,
from ./persistent-data/data-structures/array.h:23,
from persistent-data/data-structures/bitset.cc:1:
/usr/include/boost/optional/optional.hpp:679:1: note: template<class T> typename boost::optional::reference_const_type boost::get(const boost::optional<T>&)
/usr/include/boost/optional/optional.hpp:679:1: note: template argument deduction/substitution failed:
In file included from ./persistent-data/data-structures/array.h:25:0,
from persistent-data/data-structures/bitset.cc:1:
./persistent-data/data-structures/array_block.h:129:5: note: mismatched types 'const boost::optional<T>' and 'unsigned int'
In file included from /usr/include/boost/optional.hpp:15:0,
from ./persistent-data/buffer.h:27,
from ./persistent-data/block.h:22,
from ./persistent-data/transaction_manager.h:22,
from ./persistent-data/data-structures/btree.h:23,
from ./persistent-data/data-structures/array.h:23,
from persistent-data/data-structures/bitset.cc:1:
/usr/include/boost/optional/optional.hpp:687:1: note: template<class T> typename boost::optional::reference_type boost::get(boost::optional<T>&)
/usr/include/boost/optional/optional.hpp:687:1: note: template argument deduction/substitution failed:
In file included from ./persistent-data/data-structures/array.h:25:0,
from persistent-data/data-structures/bitset.cc:1:
./persistent-data/data-structures/array_block.h:129:5: note: mismatched types 'boost::optional<T>' and 'unsigned int'
In file included from /usr/include/boost/optional.hpp:15:0,
from ./persistent-data/buffer.h:27,
from ./persistent-data/block.h:22,
from ./persistent-data/transaction_manager.h:22,
from ./persistent-data/data-structures/btree.h:23,
from ./persistent-data/data-structures/array.h:23,
from persistent-data/data-structures/bitset.cc:1:
/usr/include/boost/optional/optional.hpp:697:1: note: template<class T> typename boost::optional::pointer_const_type boost::get(const boost::optional<T>*)
/usr/include/boost/optional/optional.hpp:697:1: note: template argument deduction/substitution failed:
In file included from ./persistent-data/data-structures/array.h:25:0,
from persistent-data/data-structures/bitset.cc:1:
./persistent-data/data-structures/array_block.h:129:5: note: mismatched types 'const boost::optional<T>*' and 'unsigned int'
In file included from /usr/include/boost/optional.hpp:15:0,
from ./persistent-data/buffer.h:27,
from ./persistent-data/block.h:22,
from ./persistent-data/transaction_manager.h:22,
from ./persistent-data/data-structures/btree.h:23,
from ./persistent-data/data-structures/array.h:23,
from persistent-data/data-structures/bitset.cc:1:
/usr/include/boost/optional/optional.hpp:705:1: note: template<class T> typename boost::optional::pointer_type boost::get(boost::optional<T>*)
/usr/include/boost/optional/optional.hpp:705:1: note: template argument deduction/substitution failed:
In file included from ./persistent-data/data-structures/array.h:25:0,
from persistent-data/data-structures/bitset.cc:1:
./persistent-data/data-structures/array_block.h:129:5: note: mismatched types 'boost::optional<T>*' and 'unsigned int'
persistent-data/data-structures/bitset.cc: In member function 'bool persistent_data::bitset_detail::bitset_impl::get(unsigned int)':
persistent-data/data-structures/bitset.cc:63:4: warning: control reaches end of non-void function [-Wreturn-type]
make: *** [persistent-data/data-structures/bitset.o] Error 1
make: *** Waiting for unfinished jobs....
[DEP] persistent-data/space_map.cc
[DEP] persistent-data/space-maps/recursive.cc
[DEP] persistent-data/space-maps/disk.cc
* ERROR: sys-block/thin-provisioning-tools-0.2.8-r1::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-block/thin-provisioning-tools-0.2.8-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-block/thin-provisioning-tools-0.2.8-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-block/thin-provisioning-tools-0.2.8-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-block/thin-provisioning-tools-0.2.8-r1/temp/environment'.
* Working directory: '/var/tmp/portage/sys-block/thin-provisioning-tools-0.2.8-r1/work/thin-provisioning-tools-0.2.8'
* S: '/var/tmp/portage/sys-block/thin-provisioning-tools-0.2.8-r1/work/thin-provisioning-tools-0.2.8'
* Messages for package sys-apps/keyutils-1.5.9-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* You must have CONFIG_KEYS to use this package!
* Please check to make sure these options are set correctly.
* Failure to do so may cause unexpected problems.
* Messages for package sys-apps/busybox-1.21.0:
* Could not locate user configfile, so we will save a default one
* You cannot have USE='static pam'. Assuming static is more important.
* Your configuration for sys-apps/busybox-1.21.0 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.21.0 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package net-dialup/ppp-2.4.5-r3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Pon, poff and plog scripts have been supplied for experienced users.
* Users needing particular scripts (ssh,rsh,etc.) should check out the
* /usr/share/doc/ppp-2.4.5-r3/scripts directory.
* Messages for package sys-block/thin-provisioning-tools-0.2.8-r1:
* ERROR: sys-block/thin-provisioning-tools-0.2.8-r1::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-block/thin-provisioning-tools-0.2.8-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-block/thin-provisioning-tools-0.2.8-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-block/thin-provisioning-tools-0.2.8-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-block/thin-provisioning-tools-0.2.8-r1/temp/environment'.
* Working directory: '/var/tmp/portage/sys-block/thin-provisioning-tools-0.2.8-r1/work/thin-provisioning-tools-0.2.8'
* S: '/var/tmp/portage/sys-block/thin-provisioning-tools-0.2.8-r1/work/thin-provisioning-tools-0.2.8'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20140809/.catalyst_lock'
Full build log at /tmp/catalyst-auto.30757/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2014-08-16 16:33 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2014-08-16 16:33 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
from ./persistent-data/data-structures/btree.h:23,
from ./persistent-data/data-structures/array.h:23,
from persistent-data/data-structures/bitset.cc:1:
/usr/include/boost/cstdint.hpp:311:42: error: typedef boost::ulong_long_type boost::uint64_t
persistent-data/data-structures/bitset.cc:68:14: error: expected ';' before 'w'
persistent-data/data-structures/bitset.cc:70:6: error: 'w' was not declared in this scope
persistent-data/data-structures/bitset.cc:70:27: error: 'set_bit' was not declared in this scope
persistent-data/data-structures/bitset.cc:72:6: error: 'w' was not declared in this scope
persistent-data/data-structures/bitset.cc:72:29: error: 'clear_bit' was not declared in this scope
persistent-data/data-structures/bitset.cc:73:12: error: 'class persistent_data::array<{anonymous}::bitset_traits>' has no member named 'set'
persistent-data/data-structures/bitset.cc:73:25: error: 'w' was not declared in this scope
persistent-data/data-structures/bitset.cc: In member function 'void persistent_data::bitset_detail::bitset_impl::pad_last_block(bool)':
persistent-data/data-structures/bitset.cc:129:6: error: reference to 'uint64_t' is ambiguous
In file included from /usr/lib/gcc/alpha-unknown-linux-gnu/4.7.3/include/stdint.h:3:0,
from ./persistent-data/endian_utils.h:23,
from ./persistent-data/data-structures/btree.h:22,
from ./persistent-data/data-structures/array.h:23,
from persistent-data/data-structures/bitset.cc:1:
/usr/include/stdint.h:55:27: error: candidates are: typedef long unsigned int uint64_t
In file included from /usr/include/boost/intrusive/detail/utilities.hpp:25:0,
from /usr/include/boost/intrusive/rbtree_algorithms.hpp:57,
from ./persistent-data/cache.h:25,
from ./persistent-data/block.h:23,
from ./persistent-data/transaction_manager.h:22,
from ./persistent-data/data-structures/btree.h:23,
from ./persistent-data/data-structures/array.h:23,
from persistent-data/data-structures/bitset.cc:1:
/usr/include/boost/cstdint.hpp:311:42: error: typedef boost::ulong_long_type boost::uint64_t
persistent-data/data-structures/bitset.cc:129:15: error: expected ';' before 'w'
persistent-data/data-structures/bitset.cc:133:8: error: 'w' was not declared in this scope
persistent-data/data-structures/bitset.cc:133:24: error: 'set_bit' was not declared in this scope
persistent-data/data-structures/bitset.cc:135:8: error: 'w' was not declared in this scope
persistent-data/data-structures/bitset.cc:135:26: error: 'clear_bit' was not declared in this scope
persistent-data/data-structures/bitset.cc:137:13: error: 'class persistent_data::array<{anonymous}::bitset_traits>' has no member named 'set'
persistent-data/data-structures/bitset.cc:137:26: error: 'w' was not declared in this scope
persistent-data/data-structures/bitset.cc: In member function 'void persistent_data::bitset_detail::bitset_impl::resize_array(unsigned int, bool)':
persistent-data/data-structures/bitset.cc:149:13: error: 'class persistent_data::array<{anonymous}::bitset_traits>' has no member named 'grow'
persistent-data/data-structures/bitset.cc: In member function 'bool persistent_data::bitset_detail::bitset_impl::get_bit(int, unsigned int) const':
persistent-data/data-structures/bitset.cc:165:24: error: 'mask' was not declared in this scope
In file included from ./persistent-data/data-structures/btree.h:22:0,
from ./persistent-data/data-structures/array.h:23,
from persistent-data/data-structures/bitset.cc:1:
./persistent-data/endian_utils.h: In instantiation of 'DiskType base::to_disk(const CPUType&) [with DiskType = base::le64; CPUType = int]':
persistent-data/data-structures/bitset.cc:23:42: required from here
./persistent-data/endian_utils.h:68:1: error: invalid application of 'sizeof' to incomplete type 'boost::STATIC_ASSERTION_FAILURE<false>'
./persistent-data/endian_utils.h:69:2: warning: no return statement in function returning non-void [-Wreturn-type]
In file included from ./persistent-data/data-structures/array.h:25:0,
from persistent-data/data-structures/bitset.cc:1:
./persistent-data/data-structures/array_block.h: In instantiation of 'class persistent_data::array_block<{anonymous}::bitset_traits, persistent_data::block_manager<>::read_ref>':
./persistent-data/data-structures/array.h:218:56: required from 'persistent_data::array<ValueTraits>::array(persistent_data::array<ValueTraits>::tm_ptr, persistent_data::array<ValueTraits>::ref_counter) [with ValueTraits = {anonymous}::bitset_traits; persistent_data::array<ValueTraits>::tm_ptr = boost::shared_ptr<persistent_data::transaction_manager>; persistent_data::array<ValueTraits>::ref_counter = int]'
persistent-data/data-structures/bitset.cc:37:20: required from here
./persistent-data/data-structures/array_block.h:41:44: error: no type named 'value_type' in 'struct {anonymous}::bitset_traits'
In file included from persistent-data/data-structures/bitset.cc:1:0:
./persistent-data/data-structures/array.h: In instantiation of 'void persistent_data::array<ValueTraits>::visit_value(ValueVisitor&, const btree_path&, const typename persistent_data::array<ValueTraits>::block_traits::value_type&) const [with ValueVisitor = persistent_data::bitset_detail::bitset_impl::bit_visitor; ValueTraits = {anonymous}::bitset_traits; persistent_data::btree_detail::btree_path = std::vector<long unsigned int>; typename persistent_data::array<ValueTraits>::block_traits::value_type = long unsigned int]':
./persistent-data/data-structures/array.h:154:5: required from 'void persistent_data::array<ValueTraits>::block_value_visitor<ValueVisitor>::visit(const btree_path&, const typename persistent_data::array<ValueTraits>::block_traits::value_type&) [with ValueVisitor = persistent_data::bitset_detail::bitset_impl::bit_visitor; ValueTraits = {anonymous}::bitset_traits; persistent_data::btree_detail::btree_path = std::vector<long unsigned int>; typename persistent_data::array<ValueTraits>::block_traits::value_type = long unsigned int]'
./persistent-data/data-structures/btree_damage_visitor.h:198:6: required from 'void persistent_data::btree_detail::btree_damage_visitor<ValueVisitor, DamageVisitor, Levels, ValueTraits>::visit_values(const btree_path&, const persistent_data::btree_detail::node_ref<ValueTraits>&) [with ValueVisitor = persistent_data::array<{anonymous}::bitset_traits>::block_value_visitor<persistent_data::bitset_detail::bitset_impl::bit_visitor>; DamageVisitor = persistent_data::array<{anonymous}::bitset_traits>::block_damage_visitor<persistent_data::bitset_detail::bitset_impl::damage_visitor>; unsigned int Levels = 1u; ValueTraits = persistent_data::array<{anonymous}::bitset_traits>::block_traits; persistent_data::btree_detail::btree_path = std::vector<long unsigned int>]'
./persistent-data/data-structures/btree_damage_visitor.h:174:5: required from 'bool persistent_data::btree_detail::btree_damage_visitor<ValueVisitor, DamageVisitor, Levels, ValueTraits>::visit_leaf(const node_location&, const persistent_data::btree_detail::node_ref<ValueTraits>&) [with ValueVisitor = persistent_data::array<{anonymous}::bitset_traits>::block_value_visitor<persistent_data::bitset_detail::bitset_impl::bit_visitor>; DamageVisitor = persistent_data::array<{anonymous}::bitset_traits>::block_damage_visitor<persistent_data::bitset_detail::bitset_impl::damage_visitor>; unsigned int Levels = 1u; ValueTraits = persistent_data::array<{anonymous}::bitset_traits>::block_traits; persistent_data::btree_detail::btree_damage_visitor<ValueVisitor, DamageVisitor, Levels, ValueTraits>::node_location = persistent_data::btree_detail::node_location]'
persistent-data/data-structures/bitset.cc:251:1: required from here
./persistent-data/data-structures/array.h:169:5: error: 'persistent_data::array<{anonymous}::bitset_traits>::rblock' has no member named 'get'
In file included from ./persistent-data/data-structures/array.h:25:0,
from persistent-data/data-structures/bitset.cc:1:
./persistent-data/data-structures/array_block.h: In instantiation of 'void persistent_data::array_block<ValueTraits, RefType>::dec_all_entries() [with ValueTraits = {anonymous}::bitset_traits; RefType = persistent_data::block_manager<>::read_ref]':
./persistent-data/data-structures/array.h:389:4: required from 'void persistent_data::array<ValueTraits>::dec_ablock_entries(persistent_data::block_address) [with ValueTraits = {anonymous}::bitset_traits; persistent_data::block_address = long unsigned int]'
./persistent-data/data-structures/array.h:123:5: required from 'void persistent_data::array<ValueTraits>::block_ref_counter::dec_values(uint64_t) [with ValueTraits = {anonymous}::bitset_traits; uint64_t = long unsigned int]'
./persistent-data/data-structures/array.h:108:6: required from 'void persistent_data::array<ValueTraits>::block_ref_counter::set(uint64_t, uint32_t) [with ValueTraits = {anonymous}::bitset_traits; uint64_t = long unsigned int; uint32_t = unsigned int]'
persistent-data/data-structures/bitset.cc:251:1: required from here
./persistent-data/data-structures/array_block.h:129:5: error: request for member 'dec' in '((persistent_data::array_block<{anonymous}::bitset_traits, persistent_data::block_manager<>::read_ref>*)this)->persistent_data::array_block<{anonymous}::bitset_traits, persistent_data::block_manager<>::read_ref>::rc_', which is of non-class type 'persistent_data::array_block<{anonymous}::bitset_traits, persistent_data::block_manager<>::read_ref>::ref_counter {aka int}'
./persistent-data/data-structures/array_block.h:129:5: error: no matching function for call to 'get(unsigned int&)'
./persistent-data/data-structures/array_block.h:129:5: note: candidates are:
In file included from /usr/include/boost/optional.hpp:15:0,
from ./persistent-data/buffer.h:27,
from ./persistent-data/block.h:22,
from ./persistent-data/transaction_manager.h:22,
from ./persistent-data/data-structures/btree.h:23,
from ./persistent-data/data-structures/array.h:23,
from persistent-data/data-structures/bitset.cc:1:
/usr/include/boost/optional/optional.hpp:679:1: note: template<class T> typename boost::optional::reference_const_type boost::get(const boost::optional<T>&)
/usr/include/boost/optional/optional.hpp:679:1: note: template argument deduction/substitution failed:
In file included from ./persistent-data/data-structures/array.h:25:0,
from persistent-data/data-structures/bitset.cc:1:
./persistent-data/data-structures/array_block.h:129:5: note: mismatched types 'const boost::optional<T>' and 'unsigned int'
In file included from /usr/include/boost/optional.hpp:15:0,
from ./persistent-data/buffer.h:27,
from ./persistent-data/block.h:22,
from ./persistent-data/transaction_manager.h:22,
from ./persistent-data/data-structures/btree.h:23,
from ./persistent-data/data-structures/array.h:23,
from persistent-data/data-structures/bitset.cc:1:
/usr/include/boost/optional/optional.hpp:687:1: note: template<class T> typename boost::optional::reference_type boost::get(boost::optional<T>&)
/usr/include/boost/optional/optional.hpp:687:1: note: template argument deduction/substitution failed:
In file included from ./persistent-data/data-structures/array.h:25:0,
from persistent-data/data-structures/bitset.cc:1:
./persistent-data/data-structures/array_block.h:129:5: note: mismatched types 'boost::optional<T>' and 'unsigned int'
In file included from /usr/include/boost/optional.hpp:15:0,
from ./persistent-data/buffer.h:27,
from ./persistent-data/block.h:22,
from ./persistent-data/transaction_manager.h:22,
from ./persistent-data/data-structures/btree.h:23,
from ./persistent-data/data-structures/array.h:23,
from persistent-data/data-structures/bitset.cc:1:
/usr/include/boost/optional/optional.hpp:697:1: note: template<class T> typename boost::optional::pointer_const_type boost::get(const boost::optional<T>*)
/usr/include/boost/optional/optional.hpp:697:1: note: template argument deduction/substitution failed:
In file included from ./persistent-data/data-structures/array.h:25:0,
from persistent-data/data-structures/bitset.cc:1:
./persistent-data/data-structures/array_block.h:129:5: note: mismatched types 'const boost::optional<T>*' and 'unsigned int'
In file included from /usr/include/boost/optional.hpp:15:0,
from ./persistent-data/buffer.h:27,
from ./persistent-data/block.h:22,
from ./persistent-data/transaction_manager.h:22,
from ./persistent-data/data-structures/btree.h:23,
from ./persistent-data/data-structures/array.h:23,
from persistent-data/data-structures/bitset.cc:1:
/usr/include/boost/optional/optional.hpp:705:1: note: template<class T> typename boost::optional::pointer_type boost::get(boost::optional<T>*)
/usr/include/boost/optional/optional.hpp:705:1: note: template argument deduction/substitution failed:
In file included from ./persistent-data/data-structures/array.h:25:0,
from persistent-data/data-structures/bitset.cc:1:
./persistent-data/data-structures/array_block.h:129:5: note: mismatched types 'boost::optional<T>*' and 'unsigned int'
[CXX] persistent-data/space-maps/recursive.cc
persistent-data/data-structures/bitset.cc: In member function 'bool persistent_data::bitset_detail::bitset_impl::get(unsigned int)':
persistent-data/data-structures/bitset.cc:63:4: warning: control reaches end of non-void function [-Wreturn-type]
make: *** [persistent-data/data-structures/bitset.o] Error 1
make: *** Waiting for unfinished jobs....
[DEP] persistent-data/space_map.cc
[DEP] persistent-data/space-maps/recursive.cc
[DEP] persistent-data/space-maps/disk.cc
* ERROR: sys-block/thin-provisioning-tools-0.2.8-r1::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-block/thin-provisioning-tools-0.2.8-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-block/thin-provisioning-tools-0.2.8-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-block/thin-provisioning-tools-0.2.8-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-block/thin-provisioning-tools-0.2.8-r1/temp/environment'.
* Working directory: '/var/tmp/portage/sys-block/thin-provisioning-tools-0.2.8-r1/work/thin-provisioning-tools-0.2.8'
* S: '/var/tmp/portage/sys-block/thin-provisioning-tools-0.2.8-r1/work/thin-provisioning-tools-0.2.8'
* Messages for package sys-apps/keyutils-1.5.9-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* You must have CONFIG_KEYS to use this package!
* Please check to make sure these options are set correctly.
* Failure to do so may cause unexpected problems.
* Messages for package sys-apps/busybox-1.21.0:
* Could not locate user configfile, so we will save a default one
* You cannot have USE='static pam'. Assuming static is more important.
* Your configuration for sys-apps/busybox-1.21.0 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.21.0 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package net-dialup/ppp-2.4.5-r3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Pon, poff and plog scripts have been supplied for experienced users.
* Users needing particular scripts (ssh,rsh,etc.) should check out the
* /usr/share/doc/ppp-2.4.5-r3/scripts directory.
* Messages for package sys-block/thin-provisioning-tools-0.2.8-r1:
* ERROR: sys-block/thin-provisioning-tools-0.2.8-r1::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-block/thin-provisioning-tools-0.2.8-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-block/thin-provisioning-tools-0.2.8-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-block/thin-provisioning-tools-0.2.8-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-block/thin-provisioning-tools-0.2.8-r1/temp/environment'.
* Working directory: '/var/tmp/portage/sys-block/thin-provisioning-tools-0.2.8-r1/work/thin-provisioning-tools-0.2.8'
* S: '/var/tmp/portage/sys-block/thin-provisioning-tools-0.2.8-r1/work/thin-provisioning-tools-0.2.8'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20140816/.catalyst_lock'
Full build log at /tmp/catalyst-auto.25703/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2014-10-25 17:00 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2014-10-25 17:00 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20141025/
clearing chroot ...
Emptying directory /space/catalyst/tmp/default/livecd-stage1-alpha-20141025/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage3-alpha-20141025/
to /space/catalyst/tmp/default/livecd-stage1-alpha-20141025/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
Copying livecd-stage1-chroot.sh to /tmp
copying livecd-stage1-chroot.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20141025//tmp
copying chroot-functions.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20141025//tmp
Ensure the file has the executable bit set
Running livecd-stage1-chroot.sh in chroot /space/catalyst/tmp/default/livecd-stage1-alpha-20141025/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps --update sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.2.8-r2
>>> Installing (1 of 1) sys-apps/portage-2.2.8-r2
emerge --quiet --usepkg --buildpkg --newuse --update --deep --newuse app-accessibility/brltty app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-editors/mg app-misc/screen app-misc/vlock app-portage/mirrorselect app-text/wgetpaste net-analyzer/traceroute net-dialup/mingetty net-dialup/pptpclient net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-proxy/dante net-proxy/ntlmaps net-proxy/tsocks sys-apps/busybox sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/sdparm sys-block/parted sys-fs/cryptsetup sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/jfsutils sys-fs/lsscsi sys-fs/lvm2 sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links app-misc/livecd-tools
[ebuild R ] sys-libs/zlib-1.2.8-r1
[ebuild R ] sys-libs/ncurses-5.9-r3
[ebuild R ] app-arch/bzip2-1.0.6-r6
[ebuild R ] app-arch/xz-utils-5.0.5-r1
[ebuild N ] dev-lang/python-exec-2.0.1-r1
[ebuild R ] dev-libs/expat-2.1.0-r3
[ebuild R ] sys-apps/tcp-wrappers-7.6.22-r1
[ebuild R ] sys-libs/gdbm-1.11
[ebuild N ] sys-apps/hwdata-gentoo-0.4
[ebuild N ] net-dialup/mingetty-1.08
[ebuild N ] dev-util/boost-build-1.52.0-r1
[ebuild N ] net-analyzer/netselect-0.3-r3
[ebuild N ] dev-libs/libbsd-0.6.0
[ebuild N ] dev-libs/eventlog-0.2.12
[ebuild R ] dev-libs/libffi-3.0.13-r1
[ebuild N ] app-admin/pwgen-2.06-r1
[ebuild N ] net-analyzer/traceroute-2.0.20
[ebuild N ] net-misc/rdate-1.4-r4
[ebuild N ] sys-apps/hdparm-9.39
[ebuild N ] sys-apps/sdparm-1.07
[ebuild N ] sys-fs/dosfstools-3.0.26
[ebuild N ] sys-fs/jfsutils-1.1.15
[ebuild N ] sys-fs/lsscsi-0.27
[ebuild N ] sys-fs/reiserfsprogs-3.6.24
[ebuild R ] sys-libs/cracklib-2.9.1-r1
[ebuild R ] sys-apps/file-5.17
[ebuild N ] sys-apps/keyutils-1.5.9-r1
[ebuild N ] media-libs/libpng-1.6.12
[ebuild N ] dev-libs/boost-1.52.0-r7
[ebuild N ] sys-apps/ethtool-3.12.1
[ebuild R ] sys-apps/busybox-1.21.0
[ebuild N ] app-misc/vlock-2.2.3
[ebuild N ] net-dialup/ppp-2.4.7
[ebuild R ] sys-devel/libtool-2.4.2-r1
[ebuild N ] sys-block/thin-provisioning-tools-0.2.8-r1
[ebuild N ] net-libs/libnfsidmap-0.24
[ebuild N ] sys-libs/libcap-ng-0.7.3
[ebuild N ] dev-libs/iniparser-3.1-r1
[ebuild N ] media-libs/libjpeg-turbo-1.3.1
[ebuild N ] app-misc/screen-4.0.3-r6
[ebuild N ] net-dialup/rp-pppoe-3.8-r2
[ebuild N ] net-proxy/tsocks-1.8_beta5-r5
[ebuild N ] virtual/jpeg-0-r2
[ebuild R ] dev-libs/openssl-1.0.1j
[ebuild N ] dev-libs/libevent-2.0.21-r1
[ebuild N ] dev-libs/libverto-0.2.5-r1
[ebuild N ] dev-libs/pth-2.0.7-r3
[ebuild N ] app-admin/eselect-lib-bin-symlink-0.1.1
[ebuild N ] app-admin/eselect-pinentry-0.4
[ebuild N ] app-text/wgetpaste-2.22
[ebuild N ] net-proxy/dante-1.1.19-r4
[ebuild R ] sys-libs/readline-6.2_p5-r1
[ebuild R ] sys-apps/openrc-0.12.4
[ebuild R ] sys-apps/kmod-18-r1
[ebuild N ] net-libs/libtirpc-0.2.4-r1
[ebuild N ] sys-libs/gpm-1.20.7-r2
[ebuild N ] net-firewall/iptables-1.4.21-r1
[ebuild N ] net-misc/curl-7.36.0
[ebuild N ] app-accessibility/brltty-4.5-r3
[ebuild N ] app-editors/mg-20140414
[ebuild R ] dev-libs/libpcre-8.35
[ebuild R ] dev-libs/libxml2-2.9.1-r4
[ebuild N ] sys-apps/pciutils-3.2.0
[ebuild N ] sys-apps/iproute2-3.8.0
[ebuild N ] net-nds/rpcbind-0.2.0-r1
[ebuild N ] net-misc/ntp-4.2.6_p5-r10
[ebuild N ] www-client/links-2.8-r1
[ebuild N ] net-dialup/pptpclient-1.7.2-r3
[ebuild N ] dev-python/setuptools-2.2
[ebuild N ] dev-python/pyopenssl-0.13.1
[ebuild R ] sys-apps/portage-2.2.8-r2
[ebuild N ] net-proxy/ntlmaps-0.9.9-r2
[ebuild N ] dev-python/ndg-httpsclient-0.3.2
[ebuild N ] dev-python/pyasn1-0.1.7
[ebuild N ] dev-python/chardet-2.2.1
[ebuild N ] dev-python/requests-2.3.0
[ebuild N ] dev-python/ssl-fetch-0.2
[ebuild NS ] app-text/docbook-xml-dtd-4.2-r2 [4.1.2-r6]
[ebuild N ] sys-libs/tdb-1.3.0-r1
[ebuild N ] net-misc/dhcpcd-6.4.3
[ebuild R ] sys-apps/util-linux-2.24.1-r3
[ebuild N ] sys-fs/mdadm-3.2.6-r1
[ebuild R ] sys-libs/e2fsprogs-libs-1.42.10
[ebuild N ] app-crypt/mit-krb5-1.12.2
[ebuild N ] net-fs/nfs-utils-1.2.9-r3
[ebuild N ] virtual/krb5-0-r1
[ebuild R ] dev-libs/popt-1.16-r1
[ebuild N ] sys-libs/libkudzu-1.2.57.1
[ebuild N ] sys-apps/hwsetup-1.2-r3
[ebuild R ] sys-apps/acl-2.2.52-r1
[ebuild R ] virtual/acl-0-r1
[ebuild R ] sys-fs/udev-216
[ebuild R ] sys-devel/gettext-0.18.3.2
[ebuild N ] virtual/libudev-215-r1
[ebuild R ] sys-apps/attr-2.4.47-r1
[ebuild R ] sys-fs/e2fsprogs-1.42.10
[ebuild R ] sys-devel/binutils-2.23.2
[ebuild R ] dev-libs/libgpg-error-1.12
[ebuild N ] dev-util/dialog-1.2.20140219
[ebuild N ] app-crypt/pinentry-0.8.2
[ebuild R ] dev-libs/elfutils-0.158
[ebuild N ] sys-fs/xfsprogs-3.1.10
[ebuild R ] dev-libs/libgcrypt-1.5.4
[ebuild N ] sys-fs/lvm2-2.02.103
[ebuild N ] dev-libs/libassuan-2.1.1
[ebuild N ] dev-libs/libksba-1.3.0
[ebuild N ] app-portage/mirrorselect-2.2.2
[ebuild N ] sys-block/parted-3.1-r1
[ebuild N ] app-misc/livecd-tools-2.0.4
[ebuild R ] dev-libs/libxslt-1.1.28-r3
[ebuild N ] app-crypt/gnupg-2.0.26
[ebuild N ] sys-fs/cryptsetup-1.6.2
[ebuild R ] dev-libs/glib-2.40.0-r1
[ebuild N ] sys-libs/talloc-2.1.0-r1
[ebuild N ] sys-libs/tevent-0.9.21-r1
[ebuild N ] app-admin/syslog-ng-3.4.7
[ebuild N ] net-irc/irssi-0.8.15-r1
[ebuild N ] net-fs/cifs-utils-6.1-r1
[ebuild N ] net-fs/samba-3.6.23-r1
[blocks B ] <net-misc/iputils-20121221-r1 ("<net-misc/iputils-20121221-r1" is blocking net-analyzer/traceroute-2.0.20)
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
(net-analyzer/traceroute-2.0.20::gentoo, ebuild scheduled for merge) pulled in by
net-analyzer/traceroute
(net-misc/iputils-20121221::gentoo, installed) pulled in by
net-misc/iputils
net-misc/iputils required by @system
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20141025/.catalyst_lock'
Full build log at /tmp/catalyst-auto.DMmCxR/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2014-11-01 15:48 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2014-11-01 15:48 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20141101/
clearing chroot ...
Emptying directory /space/catalyst/tmp/default/livecd-stage1-alpha-20141101/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage3-alpha-20141101/
to /space/catalyst/tmp/default/livecd-stage1-alpha-20141101/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
Copying livecd-stage1-chroot.sh to /tmp
copying livecd-stage1-chroot.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20141101//tmp
copying chroot-functions.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20141101//tmp
Ensure the file has the executable bit set
Running livecd-stage1-chroot.sh in chroot /space/catalyst/tmp/default/livecd-stage1-alpha-20141101/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps --update sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.2.8-r2
>>> Installing (1 of 1) sys-apps/portage-2.2.8-r2
emerge --quiet --usepkg --buildpkg --newuse --update --deep --newuse app-accessibility/brltty app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-editors/mg app-misc/screen app-misc/vlock app-portage/mirrorselect app-text/wgetpaste net-analyzer/traceroute net-dialup/mingetty net-dialup/pptpclient net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-proxy/dante net-proxy/ntlmaps net-proxy/tsocks sys-apps/busybox sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/sdparm sys-block/parted sys-fs/cryptsetup sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/jfsutils sys-fs/lsscsi sys-fs/lvm2 sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links app-misc/livecd-tools
[ebuild R ] sys-libs/zlib-1.2.8-r1
[ebuild R ] sys-libs/ncurses-5.9-r3
[ebuild R ] app-arch/bzip2-1.0.6-r6
[ebuild R ] app-arch/xz-utils-5.0.5-r1
[ebuild N ] dev-lang/python-exec-2.0.1-r1
[ebuild R ] dev-libs/expat-2.1.0-r3
[ebuild R ] sys-apps/tcp-wrappers-7.6.22-r1
[ebuild R ] sys-libs/gdbm-1.11
[ebuild N ] sys-apps/hwdata-gentoo-0.4
[ebuild N ] net-dialup/mingetty-1.08
[ebuild N ] dev-util/boost-build-1.52.0-r1
[ebuild N ] net-analyzer/netselect-0.3-r3
[ebuild N ] dev-libs/libbsd-0.6.0
[ebuild N ] dev-libs/eventlog-0.2.12
[ebuild R ] dev-libs/libffi-3.0.13-r1
[ebuild N ] app-admin/pwgen-2.06-r1
[ebuild N ] net-analyzer/traceroute-2.0.20
[ebuild N ] net-misc/rdate-1.4-r4
[ebuild N ] sys-apps/hdparm-9.39
[ebuild N ] sys-apps/sdparm-1.07
[ebuild N ] sys-fs/dosfstools-3.0.26
[ebuild N ] sys-fs/jfsutils-1.1.15
[ebuild N ] sys-fs/lsscsi-0.27
[ebuild N ] sys-fs/reiserfsprogs-3.6.24
[ebuild R ] sys-libs/cracklib-2.9.1-r1
[ebuild R ] sys-apps/file-5.17
[ebuild N ] sys-apps/keyutils-1.5.9-r1
[ebuild N ] media-libs/libpng-1.6.12
[ebuild N ] dev-libs/boost-1.52.0-r7
[ebuild N ] sys-apps/ethtool-3.12.1
[ebuild R ] sys-apps/busybox-1.21.0
[ebuild N ] app-misc/vlock-2.2.3
[ebuild N ] net-dialup/ppp-2.4.7
[ebuild R ] sys-devel/libtool-2.4.2-r1
[ebuild N ] sys-block/thin-provisioning-tools-0.2.8-r1
[ebuild N ] net-libs/libnfsidmap-0.24
[ebuild N ] sys-libs/libcap-ng-0.7.3
[ebuild N ] dev-libs/iniparser-3.1-r1
[ebuild N ] media-libs/libjpeg-turbo-1.3.1
[ebuild N ] app-misc/screen-4.0.3-r6
[ebuild N ] net-dialup/rp-pppoe-3.8-r2
[ebuild N ] net-proxy/tsocks-1.8_beta5-r5
[ebuild N ] virtual/jpeg-0-r2
[ebuild R ] dev-libs/openssl-1.0.1j
[ebuild N ] dev-libs/libevent-2.0.21-r1
[ebuild N ] dev-libs/libverto-0.2.5-r1
[ebuild N ] dev-libs/pth-2.0.7-r3
[ebuild N ] app-admin/eselect-lib-bin-symlink-0.1.1
[ebuild N ] app-admin/eselect-pinentry-0.4
[ebuild N ] app-text/wgetpaste-2.22
[ebuild N ] net-proxy/dante-1.1.19-r4
[ebuild R ] sys-libs/readline-6.2_p5-r1
[ebuild R ] sys-apps/openrc-0.12.4
[ebuild R ] sys-apps/kmod-18-r1
[ebuild N ] net-libs/libtirpc-0.2.4-r1
[ebuild N ] sys-libs/gpm-1.20.7-r2
[ebuild N ] net-firewall/iptables-1.4.21-r1
[ebuild N ] net-misc/curl-7.36.0
[ebuild N ] app-accessibility/brltty-5.0-r3
[ebuild N ] app-editors/mg-20140414
[ebuild R ] dev-libs/libpcre-8.35
[ebuild R ] dev-libs/libxml2-2.9.1-r4
[ebuild N ] sys-apps/pciutils-3.2.0
[ebuild N ] sys-apps/iproute2-3.8.0
[ebuild N ] net-nds/rpcbind-0.2.0-r1
[ebuild N ] net-misc/ntp-4.2.6_p5-r10
[ebuild N ] www-client/links-2.8-r1
[ebuild N ] net-dialup/pptpclient-1.7.2-r3
[ebuild N ] dev-python/setuptools-2.2
[ebuild N ] dev-python/pyopenssl-0.13.1
[ebuild R ] sys-apps/portage-2.2.8-r2
[ebuild N ] net-proxy/ntlmaps-0.9.9-r2
[ebuild N ] dev-python/ndg-httpsclient-0.3.2
[ebuild N ] dev-python/pyasn1-0.1.7
[ebuild N ] dev-python/chardet-2.2.1
[ebuild N ] dev-python/requests-2.3.0
[ebuild N ] dev-python/ssl-fetch-0.2
[ebuild NS ] app-text/docbook-xml-dtd-4.2-r2 [4.1.2-r6]
[ebuild N ] sys-libs/tdb-1.3.0-r1
[ebuild N ] net-misc/dhcpcd-6.4.3
[ebuild R ] sys-apps/util-linux-2.24.1-r3
[ebuild N ] sys-fs/mdadm-3.2.6-r1
[ebuild R ] sys-libs/e2fsprogs-libs-1.42.10
[ebuild N ] app-crypt/mit-krb5-1.12.2
[ebuild N ] net-fs/nfs-utils-1.2.9-r3
[ebuild N ] virtual/krb5-0-r1
[ebuild R ] dev-libs/popt-1.16-r1
[ebuild N ] sys-libs/libkudzu-1.2.57.1
[ebuild N ] sys-apps/hwsetup-1.2-r3
[ebuild R ] sys-apps/acl-2.2.52-r1
[ebuild R ] virtual/acl-0-r1
[ebuild R ] sys-fs/udev-216
[ebuild R ] sys-devel/gettext-0.18.3.2
[ebuild N ] virtual/libudev-215-r1
[ebuild R ] sys-apps/attr-2.4.47-r1
[ebuild R ] sys-fs/e2fsprogs-1.42.10
[ebuild R ] sys-devel/binutils-2.23.2
[ebuild R ] dev-libs/libgpg-error-1.12
[ebuild N ] dev-util/dialog-1.2.20140219
[ebuild N ] app-crypt/pinentry-0.8.2
[ebuild R ] dev-libs/elfutils-0.158
[ebuild N ] sys-fs/xfsprogs-3.1.10
[ebuild R ] dev-libs/libgcrypt-1.5.4
[ebuild N ] sys-fs/lvm2-2.02.103
[ebuild N ] dev-libs/libksba-1.3.0
[ebuild N ] dev-libs/libassuan-2.1.1
[ebuild N ] app-portage/mirrorselect-2.2.2
[ebuild N ] sys-block/parted-3.1-r1
[ebuild N ] app-misc/livecd-tools-2.0.4
[ebuild R ] dev-libs/libxslt-1.1.28-r3
[ebuild N ] app-crypt/gnupg-2.0.26
[ebuild N ] sys-fs/cryptsetup-1.6.2
[ebuild R ] dev-libs/glib-2.40.0-r1
[ebuild N ] sys-libs/talloc-2.1.0-r1
[ebuild N ] sys-libs/tevent-0.9.21-r1
[ebuild N ] app-admin/syslog-ng-3.4.7
[ebuild N ] net-irc/irssi-0.8.15-r1
[ebuild N ] net-fs/cifs-utils-6.1-r1
[ebuild N ] net-fs/samba-3.6.23-r1
[blocks B ] <net-misc/iputils-20121221-r1 ("<net-misc/iputils-20121221-r1" is blocking net-analyzer/traceroute-2.0.20)
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
(net-misc/iputils-20121221::gentoo, installed) pulled in by
net-misc/iputils required by @system
net-misc/iputils
(net-analyzer/traceroute-2.0.20::gentoo, ebuild scheduled for merge) pulled in by
net-analyzer/traceroute
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20141101/.catalyst_lock'
Full build log at /tmp/catalyst-auto.vcwxoW/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-01-10 20:06 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-01-10 20:06 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* /usr/share/doc/ppp-2.4.7/scripts directory.
* Messages for package app-misc/screen-4.0.3-r6:
* Some dangerous key bindings have been removed or changed to more safe values.
* We enable some xterm hacks in our default screenrc, which might break some
* applications. Please check /etc/screenrc for information on these changes.
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.12.4:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
* This version of OpenRC doesn't enable nfs mounts automatically any
* longer. In order to mount nfs file systems, you must use the
* nfsmount service from the nfs-utils package.
* See bug https://bugs.gentoo.org/show_bug.cgi?id=427996 for
* more information on this.
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.0-r3:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/ntp-4.2.8-r1:
* Review /etc/ntp.conf to setup server info.
* Review /etc/conf.d/ntpd to setup init.d info.
* The way ntp sets and maintains your system time has changed.
* Now you can use /etc/init.d/ntp-client to set your time at
* boot while you can use /etc/init.d/ntpd to maintain your time
* while your machine runs
* Messages for package dev-python/setuptools-7.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyopenssl-0.13.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ndg-httpsclient-0.3.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyasn1-0.1.7:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/chardet-2.2.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/requests-2.3.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ssl-fetch-0.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package net-misc/dhcpcd-6.4.3:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.24.1-r3:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-libs/libkudzu-1.2.57.1:
* QA: Kernel version could not be determined, please inherit kernel-2 or linux-info
* Messages for package sys-apps/hwsetup-1.2-r3:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* This package is intended for use on the Gentoo release media. If
* you are not building a CD, remove this package. It will not work
* properly on a running system, as Gentoo does not use any of the
* Knoppix-style detection except for CD builds.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150110/.catalyst_lock'
Full build log at /tmp/catalyst-auto.kg8uTd/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-01-18 3:17 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-01-18 3:17 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* applications. Please check /etc/screenrc for information on these changes.
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.12.4:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
* This version of OpenRC doesn't enable nfs mounts automatically any
* longer. In order to mount nfs file systems, you must use the
* nfsmount service from the nfs-utils package.
* See bug https://bugs.gentoo.org/show_bug.cgi?id=427996 for
* more information on this.
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.0-r3:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/ntp-4.2.8-r1:
* Review /etc/ntp.conf to setup server info.
* Review /etc/conf.d/ntpd to setup init.d info.
* The way ntp sets and maintains your system time has changed.
* Now you can use /etc/init.d/ntp-client to set your time at
* boot while you can use /etc/init.d/ntpd to maintain your time
* while your machine runs
* Messages for package dev-python/setuptools-7.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyopenssl-0.13.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ndg-httpsclient-0.3.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyasn1-0.1.7:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/chardet-2.2.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-lang/python-3.4.1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
* Messages for package dev-python/requests-2.3.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ssl-fetch-0.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package net-misc/dhcpcd-6.4.7:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.24.1-r3:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-libs/libkudzu-1.2.57.1:
* QA: Kernel version could not be determined, please inherit kernel-2 or linux-info
* Messages for package sys-apps/hwsetup-1.2-r3:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* This package is intended for use on the Gentoo release media. If
* you are not building a CD, remove this package. It will not work
* properly on a running system, as Gentoo does not use any of the
* Knoppix-style detection except for CD builds.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150117/.catalyst_lock'
Full build log at /tmp/catalyst-auto.KX7xv2/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-01-31 19:46 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-01-31 19:46 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* applications. Please check /etc/screenrc for information on these changes.
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.12.4:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
* This version of OpenRC doesn't enable nfs mounts automatically any
* longer. In order to mount nfs file systems, you must use the
* nfsmount service from the nfs-utils package.
* See bug https://bugs.gentoo.org/show_bug.cgi?id=427996 for
* more information on this.
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.0-r3:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/ntp-4.2.8-r1:
* Review /etc/ntp.conf to setup server info.
* Review /etc/conf.d/ntpd to setup init.d info.
* The way ntp sets and maintains your system time has changed.
* Now you can use /etc/init.d/ntp-client to set your time at
* boot while you can use /etc/init.d/ntpd to maintain your time
* while your machine runs
* Messages for package dev-python/setuptools-7.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyopenssl-0.13.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ndg-httpsclient-0.3.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyasn1-0.1.7:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/chardet-2.2.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-lang/python-3.4.1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
* Messages for package dev-python/requests-2.3.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ssl-fetch-0.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package net-misc/dhcpcd-6.4.7:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.24.1-r3:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-libs/libkudzu-1.2.57.1:
* QA: Kernel version could not be determined, please inherit kernel-2 or linux-info
* Messages for package sys-apps/hwsetup-1.2-r3:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* This package is intended for use on the Gentoo release media. If
* you are not building a CD, remove this package. It will not work
* properly on a running system, as Gentoo does not use any of the
* Knoppix-style detection except for CD builds.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150131/.catalyst_lock'
Full build log at /tmp/catalyst-auto.y4dCKf/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-02-07 19:56 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-02-07 19:56 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* applications. Please check /etc/screenrc for information on these changes.
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.12.4:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
* This version of OpenRC doesn't enable nfs mounts automatically any
* longer. In order to mount nfs file systems, you must use the
* nfsmount service from the nfs-utils package.
* See bug https://bugs.gentoo.org/show_bug.cgi?id=427996 for
* more information on this.
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.0-r3:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/ntp-4.2.8-r1:
* Review /etc/ntp.conf to setup server info.
* Review /etc/conf.d/ntpd to setup init.d info.
* The way ntp sets and maintains your system time has changed.
* Now you can use /etc/init.d/ntp-client to set your time at
* boot while you can use /etc/init.d/ntpd to maintain your time
* while your machine runs
* Messages for package dev-python/setuptools-7.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyopenssl-0.13.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ndg-httpsclient-0.3.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyasn1-0.1.7:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/chardet-2.2.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-lang/python-3.4.1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
* Messages for package dev-python/requests-2.3.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ssl-fetch-0.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package net-misc/dhcpcd-6.4.7:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.24.1-r3:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-libs/libkudzu-1.2.57.1:
* QA: Kernel version could not be determined, please inherit kernel-2 or linux-info
* Messages for package sys-apps/hwsetup-1.2-r3:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* This package is intended for use on the Gentoo release media. If
* you are not building a CD, remove this package. It will not work
* properly on a running system, as Gentoo does not use any of the
* Knoppix-style detection except for CD builds.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150207/.catalyst_lock'
Full build log at /tmp/catalyst-auto.ynCsDP/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-02-14 20:30 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-02-14 20:30 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* applications. Please check /etc/screenrc for information on these changes.
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.12.4:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
* This version of OpenRC doesn't enable nfs mounts automatically any
* longer. In order to mount nfs file systems, you must use the
* nfsmount service from the nfs-utils package.
* See bug https://bugs.gentoo.org/show_bug.cgi?id=427996 for
* more information on this.
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.0-r3:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/ntp-4.2.8-r1:
* Review /etc/ntp.conf to setup server info.
* Review /etc/conf.d/ntpd to setup init.d info.
* The way ntp sets and maintains your system time has changed.
* Now you can use /etc/init.d/ntp-client to set your time at
* boot while you can use /etc/init.d/ntpd to maintain your time
* while your machine runs
* Messages for package dev-python/setuptools-7.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyopenssl-0.13.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ndg-httpsclient-0.3.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyasn1-0.1.7:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/chardet-2.2.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-lang/python-3.4.1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
* Messages for package dev-python/requests-2.3.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ssl-fetch-0.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package net-misc/dhcpcd-6.4.7:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.24.1-r3:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-libs/libkudzu-1.2.57.1:
* QA: Kernel version could not be determined, please inherit kernel-2 or linux-info
* Messages for package sys-apps/hwsetup-1.2-r3:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* This package is intended for use on the Gentoo release media. If
* you are not building a CD, remove this package. It will not work
* properly on a running system, as Gentoo does not use any of the
* Knoppix-style detection except for CD builds.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150214/.catalyst_lock'
Full build log at /tmp/catalyst-auto.P9V6sW/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-02-21 22:33 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-02-21 22:33 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* applications. Please check /etc/screenrc for information on these changes.
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.12.4:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
* This version of OpenRC doesn't enable nfs mounts automatically any
* longer. In order to mount nfs file systems, you must use the
* nfsmount service from the nfs-utils package.
* See bug https://bugs.gentoo.org/show_bug.cgi?id=427996 for
* more information on this.
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.0-r3:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/ntp-4.2.8-r1:
* Review /etc/ntp.conf to setup server info.
* Review /etc/conf.d/ntpd to setup init.d info.
* The way ntp sets and maintains your system time has changed.
* Now you can use /etc/init.d/ntp-client to set your time at
* boot while you can use /etc/init.d/ntpd to maintain your time
* while your machine runs
* Messages for package dev-python/setuptools-7.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyopenssl-0.13.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ndg-httpsclient-0.3.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyasn1-0.1.7:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/chardet-2.2.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-lang/python-3.4.1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
* Messages for package dev-python/requests-2.3.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ssl-fetch-0.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package net-misc/dhcpcd-6.4.7:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.24.1-r3:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-libs/libkudzu-1.2.57.1:
* QA: Kernel version could not be determined, please inherit kernel-2 or linux-info
* Messages for package sys-apps/hwsetup-1.2-r3:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* This package is intended for use on the Gentoo release media. If
* you are not building a CD, remove this package. It will not work
* properly on a running system, as Gentoo does not use any of the
* Knoppix-style detection except for CD builds.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150221/.catalyst_lock'
Full build log at /tmp/catalyst-auto.2mbgEP/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-03-22 1:30 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-03-22 1:30 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.13.11:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/ntp-4.2.8-r1:
* Review /etc/ntp.conf to setup server info.
* Review /etc/conf.d/ntpd to setup init.d info.
* The way ntp sets and maintains your system time has changed.
* Now you can use /etc/init.d/ntp-client to set your time at
* boot while you can use /etc/init.d/ntpd to maintain your time
* while your machine runs
* Messages for package dev-python/setuptools-7.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyopenssl-0.13.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ndg-httpsclient-0.3.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyasn1-0.1.7:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/chardet-2.2.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-lang/python-3.4.1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
* Messages for package dev-python/requests-2.3.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ssl-fetch-0.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package net-misc/dhcpcd-6.4.7:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.24.1-r3:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-libs/libkudzu-1.2.57.1:
* QA: Kernel version could not be determined, please inherit kernel-2 or linux-info
* Messages for package sys-apps/hwsetup-1.2-r3:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* This package is intended for use on the Gentoo release media. If
* you are not building a CD, remove this package. It will not work
* properly on a running system, as Gentoo does not use any of the
* Knoppix-style detection except for CD builds.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150321/.catalyst_lock'
Full build log at /tmp/catalyst-auto.GEQdBC/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-03-29 0:10 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-03-29 0:10 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.13.11:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/ntp-4.2.8-r1:
* Review /etc/ntp.conf to setup server info.
* Review /etc/conf.d/ntpd to setup init.d info.
* The way ntp sets and maintains your system time has changed.
* Now you can use /etc/init.d/ntp-client to set your time at
* boot while you can use /etc/init.d/ntpd to maintain your time
* while your machine runs
* Messages for package dev-python/setuptools-7.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyopenssl-0.13.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ndg-httpsclient-0.3.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyasn1-0.1.7:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/chardet-2.2.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-lang/python-3.4.1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
* Messages for package dev-python/requests-2.3.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ssl-fetch-0.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package net-misc/dhcpcd-6.4.7:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.24.1-r3:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-libs/libkudzu-1.2.57.1:
* QA: Kernel version could not be determined, please inherit kernel-2 or linux-info
* Messages for package sys-apps/hwsetup-1.2-r3:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* This package is intended for use on the Gentoo release media. If
* you are not building a CD, remove this package. It will not work
* properly on a running system, as Gentoo does not use any of the
* Knoppix-style detection except for CD builds.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150328/.catalyst_lock'
Full build log at /tmp/catalyst-auto.0qcwjr/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-04-04 19:01 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-04-04 19:01 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.13.11:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/ntp-4.2.8-r1:
* Review /etc/ntp.conf to setup server info.
* Review /etc/conf.d/ntpd to setup init.d info.
* The way ntp sets and maintains your system time has changed.
* Now you can use /etc/init.d/ntp-client to set your time at
* boot while you can use /etc/init.d/ntpd to maintain your time
* while your machine runs
* Messages for package dev-python/setuptools-7.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyopenssl-0.13.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ndg-httpsclient-0.3.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyasn1-0.1.7:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/chardet-2.2.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-lang/python-3.4.1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
* Messages for package dev-python/requests-2.3.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ssl-fetch-0.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package net-misc/dhcpcd-6.4.7:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.24.1-r3:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-libs/libkudzu-1.2.57.1:
* QA: Kernel version could not be determined, please inherit kernel-2 or linux-info
* Messages for package sys-apps/hwsetup-1.2-r3:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* This package is intended for use on the Gentoo release media. If
* you are not building a CD, remove this package. It will not work
* properly on a running system, as Gentoo does not use any of the
* Knoppix-style detection except for CD builds.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150404/.catalyst_lock'
Full build log at /tmp/catalyst-auto.zQ8GeV/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-04-11 22:09 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-04-11 22:09 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.13.11:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/ntp-4.2.8-r1:
* Review /etc/ntp.conf to setup server info.
* Review /etc/conf.d/ntpd to setup init.d info.
* The way ntp sets and maintains your system time has changed.
* Now you can use /etc/init.d/ntp-client to set your time at
* boot while you can use /etc/init.d/ntpd to maintain your time
* while your machine runs
* Messages for package dev-python/setuptools-7.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyopenssl-0.13.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ndg-httpsclient-0.3.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyasn1-0.1.7:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/chardet-2.2.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-lang/python-3.4.1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
* Messages for package dev-python/requests-2.3.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ssl-fetch-0.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package net-misc/dhcpcd-6.4.7:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.24.1-r3:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-libs/libkudzu-1.2.57.1:
* QA: Kernel version could not be determined, please inherit kernel-2 or linux-info
* Messages for package sys-apps/hwsetup-1.2-r3:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* This package is intended for use on the Gentoo release media. If
* you are not building a CD, remove this package. It will not work
* properly on a running system, as Gentoo does not use any of the
* Knoppix-style detection except for CD builds.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150411/.catalyst_lock'
Full build log at /tmp/catalyst-auto.XFjNgz/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-04-19 0:43 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-04-19 0:43 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.13.11:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/ntp-4.2.8-r1:
* Review /etc/ntp.conf to setup server info.
* Review /etc/conf.d/ntpd to setup init.d info.
* The way ntp sets and maintains your system time has changed.
* Now you can use /etc/init.d/ntp-client to set your time at
* boot while you can use /etc/init.d/ntpd to maintain your time
* while your machine runs
* Messages for package dev-python/setuptools-12.0.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyopenssl-0.13.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ndg-httpsclient-0.3.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyasn1-0.1.7:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/chardet-2.2.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-lang/python-3.4.1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
* Messages for package dev-python/requests-2.3.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ssl-fetch-0.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package net-misc/dhcpcd-6.4.7:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.25.2-r2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-libs/libkudzu-1.2.57.1:
* QA: Kernel version could not be determined, please inherit kernel-2 or linux-info
* Messages for package sys-apps/hwsetup-1.2-r3:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* This package is intended for use on the Gentoo release media. If
* you are not building a CD, remove this package. It will not work
* properly on a running system, as Gentoo does not use any of the
* Knoppix-style detection except for CD builds.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150418/.catalyst_lock'
Full build log at /tmp/catalyst-auto.lPdwr8/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-04-25 20:22 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-04-25 20:22 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.13.11:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/ntp-4.2.8-r1:
* Review /etc/ntp.conf to setup server info.
* Review /etc/conf.d/ntpd to setup init.d info.
* The way ntp sets and maintains your system time has changed.
* Now you can use /etc/init.d/ntp-client to set your time at
* boot while you can use /etc/init.d/ntpd to maintain your time
* while your machine runs
* Messages for package dev-python/setuptools-12.0.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyopenssl-0.13.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ndg-httpsclient-0.3.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyasn1-0.1.7:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/chardet-2.2.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-lang/python-3.4.1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
* Messages for package dev-python/requests-2.3.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ssl-fetch-0.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package net-misc/dhcpcd-6.4.7:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.25.2-r2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-libs/libkudzu-1.2.57.1:
* QA: Kernel version could not be determined, please inherit kernel-2 or linux-info
* Messages for package sys-apps/hwsetup-1.2-r3:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* This package is intended for use on the Gentoo release media. If
* you are not building a CD, remove this package. It will not work
* properly on a running system, as Gentoo does not use any of the
* Knoppix-style detection except for CD builds.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150425/.catalyst_lock'
Full build log at /tmp/catalyst-auto.1ucWtX/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-05-02 20:35 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-05-02 20:35 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.13.11:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/ntp-4.2.8-r1:
* Review /etc/ntp.conf to setup server info.
* Review /etc/conf.d/ntpd to setup init.d info.
* The way ntp sets and maintains your system time has changed.
* Now you can use /etc/init.d/ntp-client to set your time at
* boot while you can use /etc/init.d/ntpd to maintain your time
* while your machine runs
* Messages for package dev-python/setuptools-12.0.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyopenssl-0.13.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ndg-httpsclient-0.3.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyasn1-0.1.7:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/chardet-2.2.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-lang/python-3.4.1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
* Messages for package dev-python/requests-2.6.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ssl-fetch-0.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package net-misc/dhcpcd-6.4.7:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.25.2-r2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-libs/libkudzu-1.2.57.1:
* QA: Kernel version could not be determined, please inherit kernel-2 or linux-info
* Messages for package sys-apps/hwsetup-1.2-r3:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* This package is intended for use on the Gentoo release media. If
* you are not building a CD, remove this package. It will not work
* properly on a running system, as Gentoo does not use any of the
* Knoppix-style detection except for CD builds.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150502/.catalyst_lock'
Full build log at /tmp/catalyst-auto.QZ7O7d/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-05-09 17:17 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-05-09 17:17 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/space/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/space/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for alpha
Source path set to /space/catalyst/tmp/default/stage3-alpha-20150509/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /space/catalyst/builds/default/stage3-alpha-20150509.tar.bz2
Caching snapshot to /space/catalyst/snapshot_cache/20150509/
The autoresume path is /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20150509/
Location of the package cache is /space/catalyst/packages/default/livecd-stage1-alpha-20150509/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20150509/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-livecd-stage1-alpha-20150509/
clearing chroot ...
Emptying directory /space/catalyst/tmp/default/livecd-stage1-alpha-20150509/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage3-alpha-20150509/
to /space/catalyst/tmp/default/livecd-stage1-alpha-20150509/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
Copying livecd-stage1-chroot.sh to /tmp
copying livecd-stage1-chroot.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20150509//tmp
copying chroot-functions.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20150509//tmp
Ensure the file has the executable bit set
Running livecd-stage1-chroot.sh in chroot /space/catalyst/tmp/default/livecd-stage1-alpha-20150509/
>>> Regenerating /etc/ld.so.cache...
Updating portage with USE=''
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
emerge --quiet --usepkg --buildpkg --newuse --update --deep --newuse app-accessibility/brltty app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-editors/mg app-misc/screen app-misc/vlock app-portage/mirrorselect app-text/wgetpaste net-analyzer/traceroute net-dialup/mingetty net-dialup/pptpclient net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-proxy/dante net-proxy/ntlmaps net-proxy/tsocks sys-apps/busybox sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/sdparm sys-block/parted sys-fs/cryptsetup sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/jfsutils sys-fs/lsscsi sys-fs/lvm2 sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links app-misc/livecd-tools
>>> Recording app-arch/unzip in "world" favorites file...
>>> Verifying ebuild manifests
>>> Running pre-merge checks for net-fs/samba-3.6.25
>>> Emerging (1 of 117) sys-libs/zlib-1.2.8-r1::gentoo
>>> Installing (1 of 117) sys-libs/zlib-1.2.8-r1::gentoo
>>> Emerging (2 of 117) sys-libs/ncurses-5.9-r3::gentoo
>>> Installing (2 of 117) sys-libs/ncurses-5.9-r3::gentoo
>>> Emerging (3 of 117) app-arch/bzip2-1.0.6-r6::gentoo
>>> Installing (3 of 117) app-arch/bzip2-1.0.6-r6::gentoo
>>> Emerging (4 of 117) app-arch/xz-utils-5.0.8::gentoo
>>> Installing (4 of 117) app-arch/xz-utils-5.0.8::gentoo
>>> Emerging (5 of 117) dev-libs/expat-2.1.0-r4::gentoo
>>> Installing (5 of 117) dev-libs/expat-2.1.0-r4::gentoo
>>> Emerging (6 of 117) sys-libs/gdbm-1.11::gentoo
>>> Installing (6 of 117) sys-libs/gdbm-1.11::gentoo
>>> Emerging (7 of 117) sys-apps/tcp-wrappers-7.6.22-r1::gentoo
>>> Installing (7 of 117) sys-apps/tcp-wrappers-7.6.22-r1::gentoo
>>> Emerging (8 of 117) sys-apps/hwdata-gentoo-0.4::gentoo
>>> Installing (8 of 117) sys-apps/hwdata-gentoo-0.4::gentoo
>>> Emerging (9 of 117) net-dialup/mingetty-1.08::gentoo
>>> Installing (9 of 117) net-dialup/mingetty-1.08::gentoo
>>> Recording net-dialup/mingetty in "world" favorites file...
>>> Emerging (10 of 117) dev-util/boost-build-1.55.0::gentoo
>>> Installing (10 of 117) dev-util/boost-build-1.55.0::gentoo
>>> Emerging (11 of 117) net-analyzer/netselect-0.3-r3::gentoo
>>> Installing (11 of 117) net-analyzer/netselect-0.3-r3::gentoo
>>> Emerging (12 of 117) dev-libs/libbsd-0.7.0::gentoo
>>> Installing (12 of 117) dev-libs/libbsd-0.7.0::gentoo
>>> Emerging (13 of 117) dev-libs/eventlog-0.2.12::gentoo
>>> Installing (13 of 117) dev-libs/eventlog-0.2.12::gentoo
>>> Emerging (14 of 117) dev-libs/libffi-3.0.13-r1::gentoo
>>> Installing (14 of 117) dev-libs/libffi-3.0.13-r1::gentoo
>>> Emerging (15 of 117) app-admin/pwgen-2.07::gentoo
>>> Installing (15 of 117) app-admin/pwgen-2.07::gentoo
>>> Recording app-admin/pwgen in "world" favorites file...
>>> Emerging (16 of 117) net-analyzer/traceroute-2.0.20::gentoo
>>> Installing (16 of 117) net-analyzer/traceroute-2.0.20::gentoo
>>> Recording net-analyzer/traceroute in "world" favorites file...
>>> Emerging (17 of 117) net-misc/rdate-1.4-r4::gentoo
>>> Installing (17 of 117) net-misc/rdate-1.4-r4::gentoo
>>> Recording net-misc/rdate in "world" favorites file...
>>> Emerging (18 of 117) sys-apps/hdparm-9.39::gentoo
>>> Installing (18 of 117) sys-apps/hdparm-9.39::gentoo
>>> Recording sys-apps/hdparm in "world" favorites file...
>>> Emerging (19 of 117) sys-apps/sdparm-1.07::gentoo
>>> Installing (19 of 117) sys-apps/sdparm-1.07::gentoo
>>> Recording sys-apps/sdparm in "world" favorites file...
>>> Emerging (20 of 117) sys-fs/dosfstools-3.0.26::gentoo
>>> Installing (20 of 117) sys-fs/dosfstools-3.0.26::gentoo
>>> Recording sys-fs/dosfstools in "world" favorites file...
>>> Emerging (21 of 117) sys-fs/jfsutils-1.1.15::gentoo
>>> Installing (21 of 117) sys-fs/jfsutils-1.1.15::gentoo
>>> Recording sys-fs/jfsutils in "world" favorites file...
>>> Emerging (22 of 117) sys-fs/lsscsi-0.28::gentoo
>>> Installing (22 of 117) sys-fs/lsscsi-0.28::gentoo
>>> Recording sys-fs/lsscsi in "world" favorites file...
>>> Emerging (23 of 117) sys-fs/reiserfsprogs-3.6.24::gentoo
>>> Installing (23 of 117) sys-fs/reiserfsprogs-3.6.24::gentoo
>>> Recording sys-fs/reiserfsprogs in "world" favorites file...
>>> Emerging (24 of 117) sys-libs/cracklib-2.9.1-r1::gentoo
>>> Installing (24 of 117) sys-libs/cracklib-2.9.1-r1::gentoo
>>> Emerging (25 of 117) sys-apps/file-5.22::gentoo
>>> Installing (25 of 117) sys-apps/file-5.22::gentoo
>>> Emerging (26 of 117) sys-apps/keyutils-1.5.9-r1::gentoo
>>> Installing (26 of 117) sys-apps/keyutils-1.5.9-r1::gentoo
>>> Emerging (27 of 117) dev-libs/libltdl-2.4.6::gentoo
>>> Installing (27 of 117) dev-libs/libltdl-2.4.6::gentoo
>>> Emerging (28 of 117) media-libs/libpng-1.6.16::gentoo
>>> Installing (28 of 117) media-libs/libpng-1.6.16::gentoo
>>> Emerging (29 of 117) dev-libs/boost-1.55.0-r2::gentoo
Full build log at /tmp/catalyst-auto.4CMxKM/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-05-17 10:09 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-05-17 10:09 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.13.11:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/ntp-4.2.8-r1:
* Review /etc/ntp.conf to setup server info.
* Review /etc/conf.d/ntpd to setup init.d info.
* The way ntp sets and maintains your system time has changed.
* Now you can use /etc/init.d/ntp-client to set your time at
* boot while you can use /etc/init.d/ntpd to maintain your time
* while your machine runs
* Messages for package dev-python/setuptools-12.0.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyopenssl-0.13.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ndg-httpsclient-0.3.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyasn1-0.1.7:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/chardet-2.2.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-lang/python-3.4.1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
* Messages for package dev-python/requests-2.6.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ssl-fetch-0.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package net-misc/dhcpcd-6.4.7:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.25.2-r2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-libs/libkudzu-1.2.57.1:
* QA: Kernel version could not be determined, please inherit kernel-2 or linux-info
* Messages for package sys-apps/hwsetup-1.2-r3:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* This package is intended for use on the Gentoo release media. If
* you are not building a CD, remove this package. It will not work
* properly on a running system, as Gentoo does not use any of the
* Knoppix-style detection except for CD builds.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150516/.catalyst_lock'
Full build log at /tmp/catalyst-auto.oIBG9Z/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-05-24 5:52 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-05-24 5:52 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* Messages for package sys-apps/keyutils-1.5.9-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* You must have CONFIG_KEYS to use this package!
* Please check to make sure these options are set correctly.
* Failure to do so may cause unexpected problems.
* Messages for package sys-apps/busybox-1.23.1:
* Could not locate user configfile, so we will save a default one
* You cannot have USE='static pam'. Assuming static is more important.
* Your configuration for sys-apps/busybox-1.23.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.23.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package net-dialup/ppp-2.4.7:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Pon, poff and plog scripts have been supplied for experienced users.
* Users needing particular scripts (ssh,rsh,etc.) should check out the
* /usr/share/doc/ppp-2.4.7/scripts directory.
* Messages for package app-misc/screen-4.0.3-r6:
* Some dangerous key bindings have been removed or changed to more safe values.
* We enable some xterm hacks in our default screenrc, which might break some
* applications. Please check /etc/screenrc for information on these changes.
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.13.11:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/ntp-4.2.8-r1:
* Review /etc/ntp.conf to setup server info.
* Review /etc/conf.d/ntpd to setup init.d info.
* The way ntp sets and maintains your system time has changed.
* Now you can use /etc/init.d/ntp-client to set your time at
* boot while you can use /etc/init.d/ntpd to maintain your time
* while your machine runs
* Messages for package dev-lang/python-3.4.1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
* Messages for package net-misc/dhcpcd-6.4.7:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.25.2-r2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-libs/libkudzu-1.2.57.1:
* QA: Kernel version could not be determined, please inherit kernel-2 or linux-info
* Messages for package sys-apps/hwsetup-1.2-r3:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* This package is intended for use on the Gentoo release media. If
* you are not building a CD, remove this package. It will not work
* properly on a running system, as Gentoo does not use any of the
* Knoppix-style detection except for CD builds.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150523/.catalyst_lock'
Full build log at /tmp/catalyst-auto.xbm0hq/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-05-30 23:00 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-05-30 23:00 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* Messages for package sys-apps/keyutils-1.5.9-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* You must have CONFIG_KEYS to use this package!
* Please check to make sure these options are set correctly.
* Failure to do so may cause unexpected problems.
* Messages for package sys-apps/busybox-1.23.1:
* Could not locate user configfile, so we will save a default one
* You cannot have USE='static pam'. Assuming static is more important.
* Your configuration for sys-apps/busybox-1.23.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.23.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package net-dialup/ppp-2.4.7:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Pon, poff and plog scripts have been supplied for experienced users.
* Users needing particular scripts (ssh,rsh,etc.) should check out the
* /usr/share/doc/ppp-2.4.7/scripts directory.
* Messages for package app-misc/screen-4.0.3-r6:
* Some dangerous key bindings have been removed or changed to more safe values.
* We enable some xterm hacks in our default screenrc, which might break some
* applications. Please check /etc/screenrc for information on these changes.
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.13.11:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/ntp-4.2.8-r1:
* Review /etc/ntp.conf to setup server info.
* Review /etc/conf.d/ntpd to setup init.d info.
* The way ntp sets and maintains your system time has changed.
* Now you can use /etc/init.d/ntp-client to set your time at
* boot while you can use /etc/init.d/ntpd to maintain your time
* while your machine runs
* Messages for package dev-lang/python-3.4.1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
* Messages for package net-misc/dhcpcd-6.6.7:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.25.2-r2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-libs/libkudzu-1.2.57.1:
* QA: Kernel version could not be determined, please inherit kernel-2 or linux-info
* Messages for package sys-apps/hwsetup-1.2-r3:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* This package is intended for use on the Gentoo release media. If
* you are not building a CD, remove this package. It will not work
* properly on a running system, as Gentoo does not use any of the
* Knoppix-style detection except for CD builds.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150530/.catalyst_lock'
Full build log at /tmp/catalyst-auto.yK2tLH/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-06-06 23:08 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-06-06 23:08 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* Messages for package sys-apps/keyutils-1.5.9-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* You must have CONFIG_KEYS to use this package!
* Please check to make sure these options are set correctly.
* Failure to do so may cause unexpected problems.
* Messages for package sys-apps/busybox-1.23.1:
* Could not locate user configfile, so we will save a default one
* You cannot have USE='static pam'. Assuming static is more important.
* Your configuration for sys-apps/busybox-1.23.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.23.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package net-dialup/ppp-2.4.7:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Pon, poff and plog scripts have been supplied for experienced users.
* Users needing particular scripts (ssh,rsh,etc.) should check out the
* /usr/share/doc/ppp-2.4.7/scripts directory.
* Messages for package app-misc/screen-4.0.3-r6:
* Some dangerous key bindings have been removed or changed to more safe values.
* We enable some xterm hacks in our default screenrc, which might break some
* applications. Please check /etc/screenrc for information on these changes.
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.13.11:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/ntp-4.2.8-r1:
* Review /etc/ntp.conf to setup server info.
* Review /etc/conf.d/ntpd to setup init.d info.
* The way ntp sets and maintains your system time has changed.
* Now you can use /etc/init.d/ntp-client to set your time at
* boot while you can use /etc/init.d/ntpd to maintain your time
* while your machine runs
* Messages for package dev-lang/python-3.4.1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
* Messages for package net-misc/dhcpcd-6.9.0:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.25.2-r2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-libs/libkudzu-1.2.57.1:
* QA: Kernel version could not be determined, please inherit kernel-2 or linux-info
* Messages for package sys-apps/hwsetup-1.2-r3:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* This package is intended for use on the Gentoo release media. If
* you are not building a CD, remove this package. It will not work
* properly on a running system, as Gentoo does not use any of the
* Knoppix-style detection except for CD builds.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150606/.catalyst_lock'
Full build log at /tmp/catalyst-auto.zKqpEg/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-06-13 21:19 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-06-13 21:19 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* Messages for package sys-apps/keyutils-1.5.9-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* You must have CONFIG_KEYS to use this package!
* Please check to make sure these options are set correctly.
* Failure to do so may cause unexpected problems.
* Messages for package sys-apps/busybox-1.23.1:
* Could not locate user configfile, so we will save a default one
* You cannot have USE='static pam'. Assuming static is more important.
* Your configuration for sys-apps/busybox-1.23.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.23.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package net-dialup/ppp-2.4.7:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Pon, poff and plog scripts have been supplied for experienced users.
* Users needing particular scripts (ssh,rsh,etc.) should check out the
* /usr/share/doc/ppp-2.4.7/scripts directory.
* Messages for package app-misc/screen-4.0.3-r6:
* Some dangerous key bindings have been removed or changed to more safe values.
* We enable some xterm hacks in our default screenrc, which might break some
* applications. Please check /etc/screenrc for information on these changes.
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.13.11:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/ntp-4.2.8-r1:
* Review /etc/ntp.conf to setup server info.
* Review /etc/conf.d/ntpd to setup init.d info.
* The way ntp sets and maintains your system time has changed.
* Now you can use /etc/init.d/ntp-client to set your time at
* boot while you can use /etc/init.d/ntpd to maintain your time
* while your machine runs
* Messages for package dev-lang/python-3.4.1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
* Messages for package net-misc/dhcpcd-6.9.0:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.25.2-r2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-libs/libkudzu-1.2.57.1:
* QA: Kernel version could not be determined, please inherit kernel-2 or linux-info
* Messages for package sys-apps/hwsetup-1.2-r3:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* This package is intended for use on the Gentoo release media. If
* you are not building a CD, remove this package. It will not work
* properly on a running system, as Gentoo does not use any of the
* Knoppix-style detection except for CD builds.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150613/.catalyst_lock'
Full build log at /tmp/catalyst-auto.zFMDnB/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-06-20 21:09 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-06-20 21:09 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* Messages for package sys-apps/keyutils-1.5.9-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* You must have CONFIG_KEYS to use this package!
* Please check to make sure these options are set correctly.
* Failure to do so may cause unexpected problems.
* Messages for package sys-apps/busybox-1.23.1:
* Could not locate user configfile, so we will save a default one
* You cannot have USE='static pam'. Assuming static is more important.
* Your configuration for sys-apps/busybox-1.23.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.23.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package net-dialup/ppp-2.4.7:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Pon, poff and plog scripts have been supplied for experienced users.
* Users needing particular scripts (ssh,rsh,etc.) should check out the
* /usr/share/doc/ppp-2.4.7/scripts directory.
* Messages for package app-misc/screen-4.0.3-r6:
* Some dangerous key bindings have been removed or changed to more safe values.
* We enable some xterm hacks in our default screenrc, which might break some
* applications. Please check /etc/screenrc for information on these changes.
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.13.11:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/ntp-4.2.8-r1:
* Review /etc/ntp.conf to setup server info.
* Review /etc/conf.d/ntpd to setup init.d info.
* The way ntp sets and maintains your system time has changed.
* Now you can use /etc/init.d/ntp-client to set your time at
* boot while you can use /etc/init.d/ntpd to maintain your time
* while your machine runs
* Messages for package dev-lang/python-3.4.1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
* Messages for package net-misc/dhcpcd-6.9.0:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.25.2-r2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-libs/libkudzu-1.2.57.1:
* QA: Kernel version could not be determined, please inherit kernel-2 or linux-info
* Messages for package sys-apps/hwsetup-1.2-r3:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* This package is intended for use on the Gentoo release media. If
* you are not building a CD, remove this package. It will not work
* properly on a running system, as Gentoo does not use any of the
* Knoppix-style detection except for CD builds.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150620/.catalyst_lock'
Full build log at /tmp/catalyst-auto.cXDNgx/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-06-27 22:39 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-06-27 22:39 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* Messages for package sys-apps/keyutils-1.5.9-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-apps/busybox-1.23.1:
* Could not locate user configfile, so we will save a default one
* You cannot have USE='static pam'. Assuming static is more important.
* Your configuration for sys-apps/busybox-1.23.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.23.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package net-dialup/ppp-2.4.7:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Pon, poff and plog scripts have been supplied for experienced users.
* Users needing particular scripts (ssh,rsh,etc.) should check out the
* /usr/share/doc/ppp-2.4.7/scripts directory.
* Messages for package app-misc/screen-4.0.3-r6:
* Some dangerous key bindings have been removed or changed to more safe values.
* We enable some xterm hacks in our default screenrc, which might break some
* applications. Please check /etc/screenrc for information on these changes.
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.16.4:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/ntp-4.2.8-r1:
* Review /etc/ntp.conf to setup server info.
* Review /etc/conf.d/ntpd to setup init.d info.
* The way ntp sets and maintains your system time has changed.
* Now you can use /etc/init.d/ntp-client to set your time at
* boot while you can use /etc/init.d/ntpd to maintain your time
* while your machine runs
* Messages for package dev-lang/python-3.4.1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
* Messages for package net-misc/dhcpcd-6.9.0:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.25.2-r2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-libs/libkudzu-1.2.57.1:
* QA: Kernel version could not be determined, please inherit kernel-2 or linux-info
* Messages for package sys-apps/hwsetup-1.2-r3:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* This package is intended for use on the Gentoo release media. If
* you are not building a CD, remove this package. It will not work
* properly on a running system, as Gentoo does not use any of the
* Knoppix-style detection except for CD builds.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150627/.catalyst_lock'
Full build log at /tmp/catalyst-auto.nZnZE9/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-07-04 22:48 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-07-04 22:48 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* Messages for package sys-apps/keyutils-1.5.9-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-apps/busybox-1.23.1:
* Could not locate user configfile, so we will save a default one
* You cannot have USE='static pam'. Assuming static is more important.
* Your configuration for sys-apps/busybox-1.23.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.23.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package net-dialup/ppp-2.4.7:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Pon, poff and plog scripts have been supplied for experienced users.
* Users needing particular scripts (ssh,rsh,etc.) should check out the
* /usr/share/doc/ppp-2.4.7/scripts directory.
* Messages for package app-misc/screen-4.0.3-r6:
* Some dangerous key bindings have been removed or changed to more safe values.
* We enable some xterm hacks in our default screenrc, which might break some
* applications. Please check /etc/screenrc for information on these changes.
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.17:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/ntp-4.2.8-r1:
* Review /etc/ntp.conf to setup server info.
* Review /etc/conf.d/ntpd to setup init.d info.
* The way ntp sets and maintains your system time has changed.
* Now you can use /etc/init.d/ntp-client to set your time at
* boot while you can use /etc/init.d/ntpd to maintain your time
* while your machine runs
* Messages for package dev-lang/python-3.4.1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
* Messages for package net-misc/dhcpcd-6.9.0:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.25.2-r2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-libs/libkudzu-1.2.57.1:
* QA: Kernel version could not be determined, please inherit kernel-2 or linux-info
* Messages for package sys-apps/hwsetup-1.2-r3:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* This package is intended for use on the Gentoo release media. If
* you are not building a CD, remove this package. It will not work
* properly on a running system, as Gentoo does not use any of the
* Knoppix-style detection except for CD builds.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150704/.catalyst_lock'
Full build log at /tmp/catalyst-auto.J9iEIX/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-07-12 6:35 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-07-12 6:35 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* Messages for package sys-apps/keyutils-1.5.9-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-apps/busybox-1.23.1:
* Could not locate user configfile, so we will save a default one
* You cannot have USE='static pam'. Assuming static is more important.
* Your configuration for sys-apps/busybox-1.23.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.23.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package net-dialup/ppp-2.4.7:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Pon, poff and plog scripts have been supplied for experienced users.
* Users needing particular scripts (ssh,rsh,etc.) should check out the
* /usr/share/doc/ppp-2.4.7/scripts directory.
* Messages for package app-misc/screen-4.0.3-r6:
* Some dangerous key bindings have been removed or changed to more safe values.
* We enable some xterm hacks in our default screenrc, which might break some
* applications. Please check /etc/screenrc for information on these changes.
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.17:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/ntp-4.2.8-r1:
* Review /etc/ntp.conf to setup server info.
* Review /etc/conf.d/ntpd to setup init.d info.
* The way ntp sets and maintains your system time has changed.
* Now you can use /etc/init.d/ntp-client to set your time at
* boot while you can use /etc/init.d/ntpd to maintain your time
* while your machine runs
* Messages for package dev-lang/python-3.4.1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
* Messages for package net-misc/dhcpcd-6.9.0:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.25.2-r2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-libs/libkudzu-1.2.57.1:
* QA: Kernel version could not be determined, please inherit kernel-2 or linux-info
* Messages for package sys-apps/hwsetup-1.2-r3:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* This package is intended for use on the Gentoo release media. If
* you are not building a CD, remove this package. It will not work
* properly on a running system, as Gentoo does not use any of the
* Knoppix-style detection except for CD builds.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150711/.catalyst_lock'
Full build log at /tmp/catalyst-auto.5Waoh3/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-07-19 1:05 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-07-19 1:05 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
#elif BLKSSZGET
^
../make.tmpl:367: recipe for target 'device/dev-io.o' failed
make[1]: *** [device/dev-io.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109/lib'
make.tmpl:277: recipe for target 'lib' failed
make: *** [lib] Error 2
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* Messages for package sys-apps/keyutils-1.5.9-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-apps/busybox-1.23.1:
* Could not locate user configfile, so we will save a default one
* You cannot have USE='static pam'. Assuming static is more important.
* Your configuration for sys-apps/busybox-1.23.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.23.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package net-dialup/ppp-2.4.7:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Pon, poff and plog scripts have been supplied for experienced users.
* Users needing particular scripts (ssh,rsh,etc.) should check out the
* /usr/share/doc/ppp-2.4.7/scripts directory.
* Messages for package app-misc/screen-4.0.3-r6:
* Some dangerous key bindings have been removed or changed to more safe values.
* We enable some xterm hacks in our default screenrc, which might break some
* applications. Please check /etc/screenrc for information on these changes.
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.17:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package dev-lang/python-3.4.1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
* Messages for package net-misc/dhcpcd-6.9.0:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.25.2-r2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-libs/libkudzu-1.2.57.1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-apps/hwsetup-1.2-r3:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* This package is intended for use on the Gentoo release media. If
* you are not building a CD, remove this package. It will not work
* properly on a running system, as Gentoo does not use any of the
* Knoppix-style detection except for CD builds.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150718/.catalyst_lock'
Full build log at /tmp/catalyst-auto.GAbRDY/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-07-30 0:58 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-07-30 0:58 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
In file included from /usr/include/asm/ioctls.h:4:0,
from /usr/include/bits/ioctls.h:23,
from /usr/include/sys/ioctl.h:26,
from device/dev-io.c:27:
device/dev-io.c: In function 'dev_get_block_size':
device/dev-io.c:157:7: error: missing binary operator before token "int"
#elif BLKSSZGET
^
../make.tmpl:367: recipe for target 'device/dev-io.o' failed
make[1]: *** [device/dev-io.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109/lib'
make.tmpl:277: recipe for target 'lib' failed
make: *** [lib] Error 2
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* Messages for package sys-apps/keyutils-1.5.9-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-apps/busybox-1.23.1:
* Could not locate user configfile, so we will save a default one
* You cannot have USE='static pam'. Assuming static is more important.
* Your configuration for sys-apps/busybox-1.23.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.23.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package net-dialup/ppp-2.4.7:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Pon, poff and plog scripts have been supplied for experienced users.
* Users needing particular scripts (ssh,rsh,etc.) should check out the
* /usr/share/doc/ppp-2.4.7/scripts directory.
* Messages for package app-misc/screen-4.0.3-r6:
* Some dangerous key bindings have been removed or changed to more safe values.
* We enable some xterm hacks in our default screenrc, which might break some
* applications. Please check /etc/screenrc for information on these changes.
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.17:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/dhcpcd-6.9.0:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.25.2-r2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-libs/libkudzu-1.2.57.1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-apps/hwsetup-1.2-r3:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* This package is intended for use on the Gentoo release media. If
* you are not building a CD, remove this package. It will not work
* properly on a running system, as Gentoo does not use any of the
* Knoppix-style detection except for CD builds.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150729/.catalyst_lock'
Full build log at /tmp/catalyst-auto.ae9GnI/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-08-06 4:50 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-08-06 4:50 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
In file included from /usr/include/asm/ioctls.h:4:0,
from /usr/include/bits/ioctls.h:23,
from /usr/include/sys/ioctl.h:26,
from device/dev-io.c:27:
device/dev-io.c: In function 'dev_get_block_size':
device/dev-io.c:157:7: error: missing binary operator before token "int"
#elif BLKSSZGET
^
../make.tmpl:367: recipe for target 'device/dev-io.o' failed
make[1]: *** [device/dev-io.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109/lib'
make.tmpl:277: recipe for target 'lib' failed
make: *** [lib] Error 2
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* Messages for package sys-apps/keyutils-1.5.9-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-apps/busybox-1.23.1:
* Could not locate user configfile, so we will save a default one
* You cannot have USE='static pam'. Assuming static is more important.
* Your configuration for sys-apps/busybox-1.23.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.23.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package net-dialup/ppp-2.4.7:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Pon, poff and plog scripts have been supplied for experienced users.
* Users needing particular scripts (ssh,rsh,etc.) should check out the
* /usr/share/doc/ppp-2.4.7/scripts directory.
* Messages for package app-misc/screen-4.0.3-r6:
* Some dangerous key bindings have been removed or changed to more safe values.
* We enable some xterm hacks in our default screenrc, which might break some
* applications. Please check /etc/screenrc for information on these changes.
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.17:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/dhcpcd-6.9.0:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.25.2-r2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-libs/libkudzu-1.2.57.1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-apps/hwsetup-1.2-r3:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* This package is intended for use on the Gentoo release media. If
* you are not building a CD, remove this package. It will not work
* properly on a running system, as Gentoo does not use any of the
* Knoppix-style detection except for CD builds.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150805/.catalyst_lock'
Full build log at /tmp/catalyst-auto.7Onw7w/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-08-13 8:03 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-08-13 8:03 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
FILE=`echo disk-rep.d | sed 's/\//\\\//g;s/\.d//g'`; \
DEPS=`echo ../../make.tmpl ../../VERSION ../../Makefile ../../include/.symlinks_created | sed -e 's/\//\\\//g'`; \
alpha-unknown-linux-gnu-gcc -MM -I. -I../../include -DHAVE_CONFIG_H -DDM_IOCTLS -o disk-rep.d disk-rep.c; \
sed -i "s/\(.*\)\.o[ :]*/$FILE.o $FILE.d $FILE.pot: $DEPS /g" disk-rep.d; \
DEPLIST=`sed 's/ \\//;s/.*://;' < disk-rep.d`; \
echo $DEPLIST | fmt -1 | sed 's/ //g;s/\(.*\)/\1:/' >> disk-rep.d; \
[ -s disk-rep.d ] || rm -f disk-rep.d
make[2]: Nothing to be done for 'device-mapper'.
make[2]: Leaving directory '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109/lib/format1'
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid config/config.c -o config/config.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid datastruct/btree.c -o datastruct/btree.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid datastruct/str_list.c -o datastruct/str_list.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid device/dev-cache.c -o device/dev-cache.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid device/dev-io.c -o device/dev-io.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid device/dev-md.c -o device/dev-md.o
In file included from /usr/include/asm/ioctls.h:4:0,
from /usr/include/bits/ioctls.h:23,
from /usr/include/sys/ioctl.h:26,
from device/dev-io.c:27:
device/dev-io.c: In function 'dev_get_block_size':
device/dev-io.c:157:7: error: missing binary operator before token "int"
#elif BLKSSZGET
^
../make.tmpl:367: recipe for target 'device/dev-io.o' failed
make[1]: *** [device/dev-io.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109/lib'
make.tmpl:277: recipe for target 'lib' failed
make: *** [lib] Error 2
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* Messages for package sys-apps/keyutils-1.5.9-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-apps/busybox-1.23.1:
* Could not locate user configfile, so we will save a default one
* You cannot have USE='static pam'. Assuming static is more important.
* Your configuration for sys-apps/busybox-1.23.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.23.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package net-dialup/ppp-2.4.7:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Pon, poff and plog scripts have been supplied for experienced users.
* Users needing particular scripts (ssh,rsh,etc.) should check out the
* /usr/share/doc/ppp-2.4.7/scripts directory.
* Messages for package app-misc/screen-4.0.3-r6:
* Some dangerous key bindings have been removed or changed to more safe values.
* We enable some xterm hacks in our default screenrc, which might break some
* applications. Please check /etc/screenrc for information on these changes.
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.17:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/dhcpcd-6.9.0:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.25.2-r2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150812/.catalyst_lock'
Full build log at /tmp/catalyst-auto.x3gkoZ/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-08-20 0:02 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-08-20 0:02 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
FILE=`echo disk-rep.d | sed 's/\//\\\//g;s/\.d//g'`; \
DEPS=`echo ../../make.tmpl ../../VERSION ../../Makefile ../../include/.symlinks_created | sed -e 's/\//\\\//g'`; \
alpha-unknown-linux-gnu-gcc -MM -I. -I../../include -DHAVE_CONFIG_H -DDM_IOCTLS -o disk-rep.d disk-rep.c; \
sed -i "s/\(.*\)\.o[ :]*/$FILE.o $FILE.d $FILE.pot: $DEPS /g" disk-rep.d; \
DEPLIST=`sed 's/ \\//;s/.*://;' < disk-rep.d`; \
echo $DEPLIST | fmt -1 | sed 's/ //g;s/\(.*\)/\1:/' >> disk-rep.d; \
[ -s disk-rep.d ] || rm -f disk-rep.d
make[2]: Nothing to be done for 'device-mapper'.
make[2]: Leaving directory '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109/lib/format1'
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid config/config.c -o config/config.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid datastruct/btree.c -o datastruct/btree.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid datastruct/str_list.c -o datastruct/str_list.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid device/dev-cache.c -o device/dev-cache.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid device/dev-io.c -o device/dev-io.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid device/dev-md.c -o device/dev-md.o
In file included from /usr/include/asm/ioctls.h:4:0,
from /usr/include/bits/ioctls.h:23,
from /usr/include/sys/ioctl.h:26,
from device/dev-io.c:27:
device/dev-io.c: In function 'dev_get_block_size':
device/dev-io.c:157:7: error: missing binary operator before token "int"
#elif BLKSSZGET
^
../make.tmpl:367: recipe for target 'device/dev-io.o' failed
make[1]: *** [device/dev-io.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109/lib'
make.tmpl:277: recipe for target 'lib' failed
make: *** [lib] Error 2
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* Messages for package sys-apps/keyutils-1.5.9-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-apps/busybox-1.23.1:
* Could not locate user configfile, so we will save a default one
* You cannot have USE='static pam'. Assuming static is more important.
* Your configuration for sys-apps/busybox-1.23.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.23.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package net-dialup/ppp-2.4.7:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Pon, poff and plog scripts have been supplied for experienced users.
* Users needing particular scripts (ssh,rsh,etc.) should check out the
* /usr/share/doc/ppp-2.4.7/scripts directory.
* Messages for package app-misc/screen-4.0.3-r6:
* Some dangerous key bindings have been removed or changed to more safe values.
* We enable some xterm hacks in our default screenrc, which might break some
* applications. Please check /etc/screenrc for information on these changes.
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.17:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/dhcpcd-6.9.0:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.25.2-r2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150819/.catalyst_lock'
Full build log at /tmp/catalyst-auto.xfhujO/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-08-27 0:13 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-08-27 0:13 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
FILE=`echo disk-rep.d | sed 's/\//\\\//g;s/\.d//g'`; \
DEPS=`echo ../../make.tmpl ../../VERSION ../../Makefile ../../include/.symlinks_created | sed -e 's/\//\\\//g'`; \
alpha-unknown-linux-gnu-gcc -MM -I. -I../../include -DHAVE_CONFIG_H -DDM_IOCTLS -o disk-rep.d disk-rep.c; \
sed -i "s/\(.*\)\.o[ :]*/$FILE.o $FILE.d $FILE.pot: $DEPS /g" disk-rep.d; \
DEPLIST=`sed 's/ \\//;s/.*://;' < disk-rep.d`; \
echo $DEPLIST | fmt -1 | sed 's/ //g;s/\(.*\)/\1:/' >> disk-rep.d; \
[ -s disk-rep.d ] || rm -f disk-rep.d
make[2]: Nothing to be done for 'device-mapper'.
make[2]: Leaving directory '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109/lib/format1'
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid config/config.c -o config/config.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid datastruct/btree.c -o datastruct/btree.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid datastruct/str_list.c -o datastruct/str_list.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid device/dev-cache.c -o device/dev-cache.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid device/dev-io.c -o device/dev-io.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid device/dev-md.c -o device/dev-md.o
In file included from /usr/include/asm/ioctls.h:4:0,
from /usr/include/bits/ioctls.h:23,
from /usr/include/sys/ioctl.h:26,
from device/dev-io.c:27:
device/dev-io.c: In function 'dev_get_block_size':
device/dev-io.c:157:7: error: missing binary operator before token "int"
#elif BLKSSZGET
^
../make.tmpl:367: recipe for target 'device/dev-io.o' failed
make[1]: *** [device/dev-io.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109/lib'
make.tmpl:277: recipe for target 'lib' failed
make: *** [lib] Error 2
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* Messages for package sys-apps/keyutils-1.5.9-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-apps/busybox-1.23.1:
* Could not locate user configfile, so we will save a default one
* You cannot have USE='static pam'. Assuming static is more important.
* Your configuration for sys-apps/busybox-1.23.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.23.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package net-dialup/ppp-2.4.7:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Pon, poff and plog scripts have been supplied for experienced users.
* Users needing particular scripts (ssh,rsh,etc.) should check out the
* /usr/share/doc/ppp-2.4.7/scripts directory.
* Messages for package app-misc/screen-4.0.3-r6:
* Some dangerous key bindings have been removed or changed to more safe values.
* We enable some xterm hacks in our default screenrc, which might break some
* applications. Please check /etc/screenrc for information on these changes.
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.17:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/dhcpcd-6.9.0:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.25.2-r2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150826/.catalyst_lock'
Full build log at /tmp/catalyst-auto.X4yp7L/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-09-03 4:11 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-09-03 4:11 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
DEPS=`echo ../../make.tmpl ../../VERSION ../../Makefile ../../include/.symlinks_created | sed -e 's/\//\\\//g'`; \
alpha-unknown-linux-gnu-gcc -MM -I. -I../../include -DHAVE_CONFIG_H -DDM_IOCTLS -o disk-rep.d disk-rep.c; \
sed -i "s/\(.*\)\.o[ :]*/$FILE.o $FILE.d $FILE.pot: $DEPS /g" disk-rep.d; \
DEPLIST=`sed 's/ \\//;s/.*://;' < disk-rep.d`; \
echo $DEPLIST | fmt -1 | sed 's/ //g;s/\(.*\)/\1:/' >> disk-rep.d; \
[ -s disk-rep.d ] || rm -f disk-rep.d
make[2]: Nothing to be done for 'device-mapper'.
make[2]: Leaving directory '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109/lib/format1'
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid config/config.c -o config/config.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid datastruct/btree.c -o datastruct/btree.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid datastruct/str_list.c -o datastruct/str_list.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid device/dev-cache.c -o device/dev-cache.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid device/dev-io.c -o device/dev-io.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid device/dev-md.c -o device/dev-md.o
In file included from /usr/include/asm/ioctls.h:4:0,
from /usr/include/bits/ioctls.h:23,
from /usr/include/sys/ioctl.h:26,
from device/dev-io.c:27:
device/dev-io.c: In function 'dev_get_block_size':
device/dev-io.c:157:7: error: missing binary operator before token "int"
#elif BLKSSZGET
^
../make.tmpl:367: recipe for target 'device/dev-io.o' failed
make[1]: *** [device/dev-io.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109/lib'
make.tmpl:277: recipe for target 'lib' failed
make: *** [lib] Error 2
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* Messages for package sys-apps/keyutils-1.5.9-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-apps/busybox-1.23.1:
* Could not locate user configfile, so we will save a default one
* You cannot have USE='static pam'. Assuming static is more important.
* Your configuration for sys-apps/busybox-1.23.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.23.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package net-dialup/ppp-2.4.7:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Pon, poff and plog scripts have been supplied for experienced users.
* Users needing particular scripts (ssh,rsh,etc.) should check out the
* /usr/share/doc/ppp-2.4.7/scripts directory.
* Messages for package app-misc/screen-4.3.1:
* Some dangerous key bindings have been removed or changed to more safe values.
* We enable some xterm hacks in our default screenrc, which might break some
* applications. Please check /etc/screenrc for information on these changes.
* This revision changes the screen socket location to /tmp/screen
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.17:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/dhcpcd-6.9.0:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.25.2-r2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150902/.catalyst_lock'
Full build log at /tmp/catalyst-auto.1svAZh/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-09-09 23:53 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-09-09 23:53 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
DEPS=`echo ../../make.tmpl ../../VERSION ../../Makefile ../../include/.symlinks_created | sed -e 's/\//\\\//g'`; \
alpha-unknown-linux-gnu-gcc -MM -I. -I../../include -DHAVE_CONFIG_H -DDM_IOCTLS -o disk-rep.d disk-rep.c; \
sed -i "s/\(.*\)\.o[ :]*/$FILE.o $FILE.d $FILE.pot: $DEPS /g" disk-rep.d; \
DEPLIST=`sed 's/ \\//;s/.*://;' < disk-rep.d`; \
echo $DEPLIST | fmt -1 | sed 's/ //g;s/\(.*\)/\1:/' >> disk-rep.d; \
[ -s disk-rep.d ] || rm -f disk-rep.d
make[2]: Nothing to be done for 'device-mapper'.
make[2]: Leaving directory '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109/lib/format1'
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid config/config.c -o config/config.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid datastruct/btree.c -o datastruct/btree.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid datastruct/str_list.c -o datastruct/str_list.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid device/dev-cache.c -o device/dev-cache.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid device/dev-io.c -o device/dev-io.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid device/dev-md.c -o device/dev-md.o
In file included from /usr/include/asm/ioctls.h:4:0,
from /usr/include/bits/ioctls.h:23,
from /usr/include/sys/ioctl.h:26,
from device/dev-io.c:27:
device/dev-io.c: In function 'dev_get_block_size':
device/dev-io.c:157:7: error: missing binary operator before token "int"
#elif BLKSSZGET
^
../make.tmpl:367: recipe for target 'device/dev-io.o' failed
make[1]: *** [device/dev-io.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109/lib'
make.tmpl:277: recipe for target 'lib' failed
make: *** [lib] Error 2
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* Messages for package sys-apps/keyutils-1.5.9-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-apps/busybox-1.23.1:
* Could not locate user configfile, so we will save a default one
* You cannot have USE='static pam'. Assuming static is more important.
* Your configuration for sys-apps/busybox-1.23.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.23.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package net-dialup/ppp-2.4.7:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Pon, poff and plog scripts have been supplied for experienced users.
* Users needing particular scripts (ssh,rsh,etc.) should check out the
* /usr/share/doc/ppp-2.4.7/scripts directory.
* Messages for package app-misc/screen-4.3.1:
* Some dangerous key bindings have been removed or changed to more safe values.
* We enable some xterm hacks in our default screenrc, which might break some
* applications. Please check /etc/screenrc for information on these changes.
* This revision changes the screen socket location to /tmp/screen
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.17:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/dhcpcd-6.9.0:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.25.2-r2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150909/.catalyst_lock'
Full build log at /tmp/catalyst-auto.m57vls/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-09-17 2:05 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-09-17 2:05 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
DEPS=`echo ../../make.tmpl ../../VERSION ../../Makefile ../../include/.symlinks_created | sed -e 's/\//\\\//g'`; \
alpha-unknown-linux-gnu-gcc -MM -I. -I../../include -DHAVE_CONFIG_H -DDM_IOCTLS -o disk-rep.d disk-rep.c; \
sed -i "s/\(.*\)\.o[ :]*/$FILE.o $FILE.d $FILE.pot: $DEPS /g" disk-rep.d; \
DEPLIST=`sed 's/ \\//;s/.*://;' < disk-rep.d`; \
echo $DEPLIST | fmt -1 | sed 's/ //g;s/\(.*\)/\1:/' >> disk-rep.d; \
[ -s disk-rep.d ] || rm -f disk-rep.d
make[2]: Nothing to be done for 'device-mapper'.
make[2]: Leaving directory '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109/lib/format1'
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid config/config.c -o config/config.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid datastruct/btree.c -o datastruct/btree.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid datastruct/str_list.c -o datastruct/str_list.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid device/dev-cache.c -o device/dev-cache.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid device/dev-io.c -o device/dev-io.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid device/dev-md.c -o device/dev-md.o
In file included from /usr/include/asm/ioctls.h:4:0,
from /usr/include/bits/ioctls.h:23,
from /usr/include/sys/ioctl.h:26,
from device/dev-io.c:27:
device/dev-io.c: In function 'dev_get_block_size':
device/dev-io.c:157:7: error: missing binary operator before token "int"
#elif BLKSSZGET
^
../make.tmpl:367: recipe for target 'device/dev-io.o' failed
make[1]: *** [device/dev-io.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109/lib'
make.tmpl:277: recipe for target 'lib' failed
make: *** [lib] Error 2
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* Messages for package sys-apps/keyutils-1.5.9-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-apps/busybox-1.23.1:
* Could not locate user configfile, so we will save a default one
* You cannot have USE='static pam'. Assuming static is more important.
* Your configuration for sys-apps/busybox-1.23.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.23.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package net-dialup/ppp-2.4.7:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Pon, poff and plog scripts have been supplied for experienced users.
* Users needing particular scripts (ssh,rsh,etc.) should check out the
* /usr/share/doc/ppp-2.4.7/scripts directory.
* Messages for package app-misc/screen-4.3.1:
* Some dangerous key bindings have been removed or changed to more safe values.
* We enable some xterm hacks in our default screenrc, which might break some
* applications. Please check /etc/screenrc for information on these changes.
* This revision changes the screen socket location to /tmp/screen
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.17:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/dhcpcd-6.9.0:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.25.2-r2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150916/.catalyst_lock'
Full build log at /tmp/catalyst-auto.lslGNo/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-09-24 0:08 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-09-24 0:08 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
DEPS=`echo ../../make.tmpl ../../VERSION ../../Makefile ../../include/.symlinks_created | sed -e 's/\//\\\//g'`; \
alpha-unknown-linux-gnu-gcc -MM -I. -I../../include -DHAVE_CONFIG_H -DDM_IOCTLS -o disk-rep.d disk-rep.c; \
sed -i "s/\(.*\)\.o[ :]*/$FILE.o $FILE.d $FILE.pot: $DEPS /g" disk-rep.d; \
DEPLIST=`sed 's/ \\//;s/.*://;' < disk-rep.d`; \
echo $DEPLIST | fmt -1 | sed 's/ //g;s/\(.*\)/\1:/' >> disk-rep.d; \
[ -s disk-rep.d ] || rm -f disk-rep.d
make[2]: Nothing to be done for 'device-mapper'.
make[2]: Leaving directory '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109/lib/format1'
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid config/config.c -o config/config.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid datastruct/btree.c -o datastruct/btree.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid datastruct/str_list.c -o datastruct/str_list.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid device/dev-cache.c -o device/dev-cache.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid device/dev-io.c -o device/dev-io.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid device/dev-md.c -o device/dev-md.o
In file included from /usr/include/asm/ioctls.h:4:0,
from /usr/include/bits/ioctls.h:23,
from /usr/include/sys/ioctl.h:26,
from device/dev-io.c:27:
device/dev-io.c: In function 'dev_get_block_size':
device/dev-io.c:157:7: error: missing binary operator before token "int"
#elif BLKSSZGET
^
../make.tmpl:367: recipe for target 'device/dev-io.o' failed
make[1]: *** [device/dev-io.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109/lib'
make.tmpl:277: recipe for target 'lib' failed
make: *** [lib] Error 2
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* Messages for package sys-apps/keyutils-1.5.9-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-apps/busybox-1.23.1:
* Could not locate user configfile, so we will save a default one
* You cannot have USE='static pam'. Assuming static is more important.
* Your configuration for sys-apps/busybox-1.23.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.23.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package net-dialup/ppp-2.4.7:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Pon, poff and plog scripts have been supplied for experienced users.
* Users needing particular scripts (ssh,rsh,etc.) should check out the
* /usr/share/doc/ppp-2.4.7/scripts directory.
* Messages for package app-misc/screen-4.3.1-r1:
* Some dangerous key bindings have been removed or changed to more safe values.
* We enable some xterm hacks in our default screenrc, which might break some
* applications. Please check /etc/screenrc for information on these changes.
* This revision changes the screen socket location to /tmp/screen
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.17:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/dhcpcd-6.9.0:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.25.2-r2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150923/.catalyst_lock'
Full build log at /tmp/catalyst-auto.IxXHEC/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2015-10-01 0:23 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2015-10-01 0:23 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
DEPS=`echo ../../make.tmpl ../../VERSION ../../Makefile ../../include/.symlinks_created | sed -e 's/\//\\\//g'`; \
alpha-unknown-linux-gnu-gcc -MM -I. -I../../include -DHAVE_CONFIG_H -DDM_IOCTLS -o disk-rep.d disk-rep.c; \
sed -i "s/\(.*\)\.o[ :]*/$FILE.o $FILE.d $FILE.pot: $DEPS /g" disk-rep.d; \
DEPLIST=`sed 's/ \\//;s/.*://;' < disk-rep.d`; \
echo $DEPLIST | fmt -1 | sed 's/ //g;s/\(.*\)/\1:/' >> disk-rep.d; \
[ -s disk-rep.d ] || rm -f disk-rep.d
make[2]: Nothing to be done for 'device-mapper'.
make[2]: Leaving directory '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109/lib/format1'
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid config/config.c -o config/config.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid datastruct/btree.c -o datastruct/btree.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid datastruct/str_list.c -o datastruct/str_list.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid device/dev-cache.c -o device/dev-cache.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid device/dev-io.c -o device/dev-io.o
alpha-unknown-linux-gnu-gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -Wredundant-decls -Wpointer-arith -Wuninitialized -Wmissing-include-dirs -Wfloat-equal -Wstrict-prototypes -Wold-style-definition -Wmissing-format-attribute -Wjump-misses-init -Wclobbered -Wempty-body -Wignored-qualifiers -Wmissing-parameter-type -Wold-style-declaration -Woverride-init -Wtype-limits -Wsync-nand -Wlogical-op -mieee -pipe -O2 -mcpu=ev4 -mieee -pipe -O2 -mcpu=ev4 -fPIC -mieee -pipe -O2 -mcpu=ev4 -fPIC -I/usr/include/blkid -I/usr/include/uuid device/dev-md.c -o device/dev-md.o
In file included from /usr/include/asm/ioctls.h:4:0,
from /usr/include/bits/ioctls.h:23,
from /usr/include/sys/ioctl.h:26,
from device/dev-io.c:27:
device/dev-io.c: In function 'dev_get_block_size':
device/dev-io.c:157:7: error: missing binary operator before token "int"
#elif BLKSSZGET
^
../make.tmpl:367: recipe for target 'device/dev-io.o' failed
make[1]: *** [device/dev-io.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109/lib'
make.tmpl:277: recipe for target 'lib' failed
make: *** [lib] Error 2
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* Messages for package sys-apps/keyutils-1.5.9-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-apps/busybox-1.23.1:
* Could not locate user configfile, so we will save a default one
* You cannot have USE='static pam'. Assuming static is more important.
* Your configuration for sys-apps/busybox-1.23.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.23.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package net-dialup/ppp-2.4.7:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Pon, poff and plog scripts have been supplied for experienced users.
* Users needing particular scripts (ssh,rsh,etc.) should check out the
* /usr/share/doc/ppp-2.4.7/scripts directory.
* Messages for package app-misc/screen-4.3.1-r1:
* Some dangerous key bindings have been removed or changed to more safe values.
* We enable some xterm hacks in our default screenrc, which might break some
* applications. Please check /etc/screenrc for information on these changes.
* This revision changes the screen socket location to /tmp/screen
* Messages for package net-dialup/rp-pppoe-3.8-r2:
* Use pppoe-setup to configure your dialup connection.
* Messages for package sys-apps/openrc-0.17:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package app-accessibility/brltty-5.2:
*
* please be sure /etc/brltty.conf is correct for your system.
*
* To make brltty start on boot, type this command as root:
*
* rc-update add brltty boot
* Messages for package net-misc/dhcpcd-6.9.0:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-apps/util-linux-2.25.2-r2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/lvm2-2.02.109::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/lvm2-2.02.109::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/lvm2-2.02.109::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/lvm2-2.02.109/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
* S: '/var/tmp/portage/sys-fs/lvm2-2.02.109/work/LVM2.2.02.109'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20150930/.catalyst_lock'
Full build log at /tmp/catalyst-auto.zxCUnS/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2016-01-13 21:06 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2016-01-13 21:06 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage3-alpha-20160113/
to /space/catalyst/tmp/default/livecd-stage1-alpha-20160113/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
Copying livecd-stage1-chroot.sh to /tmp
copying livecd-stage1-chroot.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20160113//tmp
copying chroot-functions.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20160113//tmp
Ensure the file has the executable bit set
Running livecd-stage1-chroot.sh in chroot /space/catalyst/tmp/default/livecd-stage1-alpha-20160113/
>>> Regenerating /etc/ld.so.cache...
Updating portage with USE=''
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
emerge --quiet --usepkg --buildpkg --newuse --update --deep --newuse app-accessibility/brltty app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-editors/mg app-misc/screen app-misc/vlock app-portage/mirrorselect app-text/wgetpaste net-analyzer/traceroute net-dialup/mingetty net-dialup/pptpclient net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-proxy/dante net-proxy/ntlmaps net-proxy/tsocks sys-apps/busybox sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/sdparm sys-block/parted sys-fs/cryptsetup sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/jfsutils sys-fs/lsscsi sys-fs/lvm2 sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links app-misc/livecd-tools
[ebuild R ] sys-libs/zlib-1.2.8-r1
[ebuild R ] sys-libs/ncurses-5.9-r5
[ebuild R ] app-arch/xz-utils-5.0.8
[ebuild R ] app-arch/bzip2-1.0.6-r6
[ebuild R ] dev-libs/expat-2.1.0-r5
[ebuild N ] sys-apps/tcp-wrappers-7.6.22-r1
[ebuild R ] sys-libs/gdbm-1.11
[ebuild N ] sys-apps/hwdata-gentoo-0.4
[ebuild N ] net-dialup/mingetty-1.08
[ebuild N ] dev-libs/libaio-0.3.110
[ebuild N ] dev-util/boost-build-1.56.0
[ebuild N ] net-analyzer/netselect-0.3-r3
[ebuild N ] dev-libs/libbsd-0.7.0
[ebuild N ] dev-libs/eventlog-0.2.12
[ebuild R ] dev-libs/libffi-3.0.13-r1
[ebuild N ] media-libs/libjpeg-turbo-1.4.2
[ebuild N ] app-admin/pwgen-2.07
[ebuild N ] net-analyzer/traceroute-2.0.20
[ebuild N ] net-misc/rdate-1.4-r4
[ebuild N ] sys-apps/hdparm-9.45
[ebuild N ] sys-apps/sdparm-1.07
[ebuild N ] sys-fs/dosfstools-3.0.28
[ebuild N ] sys-fs/jfsutils-1.1.15
[ebuild N ] sys-fs/lsscsi-0.28
[ebuild N ] sys-fs/reiserfsprogs-3.6.24
[ebuild R ] sys-libs/ncurses-5.9-r99
[ebuild R ] sys-libs/cracklib-2.9.1-r1
[ebuild R ] sys-apps/file-5.22
[ebuild N ] sys-apps/keyutils-1.5.9-r1
[ebuild R ] dev-libs/libltdl-2.4.6
[ebuild N ] media-libs/libpng-1.6.19
[ebuild N ] dev-libs/boost-1.56.0-r1
[ebuild N ] virtual/jpeg-0-r2
[ebuild N ] sys-apps/ethtool-3.18
[ebuild R ] sys-apps/busybox-1.24.1
[ebuild N ] app-misc/vlock-2.2.3
[ebuild N ] net-dialup/ppp-2.4.7
[ebuild R ] dev-libs/iniparser-3.1-r1
[ebuild N ] sys-block/thin-provisioning-tools-0.4.1
[ebuild N ] net-libs/libnfsidmap-0.24
[ebuild N ] sys-libs/libcap-ng-0.7.7
[ebuild N ] app-misc/screen-4.3.1-r1
[ebuild N ] net-dialup/rp-pppoe-3.11-r3
[ebuild N ] net-proxy/tsocks-1.8_beta5-r5
[ebuild R ] dev-libs/openssl-1.0.2e
[ebuild N ] dev-libs/libevent-2.0.22
[ebuild N ] dev-libs/libverto-0.2.5-r1
[ebuild N ] dev-libs/pth-2.0.7-r3
[ebuild N ] app-eselect/eselect-lib-bin-symlink-0.1.1
[ebuild N ] app-eselect/eselect-pinentry-0.6
[ebuild N ] net-dialup/pptpclient-1.8.0
[ebuild N ] app-text/wgetpaste-2.25-r3
[ebuild N ] net-proxy/dante-1.1.19-r4
[ebuild R ] sys-libs/readline-6.3_p8-r2
[ebuild R ] sys-apps/openrc-0.18.4
[ebuild R ] net-firewall/iptables-1.4.21-r1
[ebuild R ] sys-apps/kmod-21
[ebuild N ] net-libs/libtirpc-0.2.5
[ebuild N ] sys-libs/gpm-1.20.7-r2
[ebuild N ] net-misc/curl-7.45.0
[ebuild N ] app-accessibility/brltty-5.2
[ebuild N ] app-editors/mg-20150323
[ebuild R ] dev-libs/libpcre-8.38
[ebuild R ] dev-libs/libxml2-2.9.2-r4
[ebuild N ] net-nds/rpcbind-0.2.3-r1
[ebuild N ] net-misc/ntp-4.2.8_p3
[ebuild N ] www-client/links-2.8-r1
[ebuild N ] dev-python/enum34-1.0.4
[ebuild N ] net-proxy/ntlmaps-0.9.9-r2
[ebuild N ] dev-python/pyasn1-0.1.8
[ebuild N ] dev-python/six-1.10.0
[ebuild N ] dev-python/py-1.4.30
[ebuild N ] dev-python/chardet-2.2.1
[ebuild N ] dev-python/idna-2.0
[ebuild N ] dev-python/ply-3.6-r1
[ebuild N ] dev-python/ipaddress-1.0.14
[ebuild N ] dev-python/pycparser-2.14
[ebuild N ] virtual/python-ipaddress-1.0
[ebuild N ] dev-python/cffi-1.2.1
[ebuild N ] dev-python/cryptography-1.0.2
[ebuild N ] dev-python/pyopenssl-0.14
[ebuild N ] dev-python/ndg-httpsclient-0.4.0
[ebuild N ] dev-python/requests-2.8.1
[ebuild N ] dev-python/ssl-fetch-0.3
[ebuild N ] sys-libs/tdb-1.3.8
[ebuild N ] net-misc/dhcpcd-6.9.0
[ebuild R ] sys-apps/util-linux-2.26.2
[ebuild N ] sys-fs/mdadm-3.3.1-r2
[ebuild R ] sys-apps/attr-2.4.47-r2
[ebuild R ] dev-libs/popt-1.16-r2
[ebuild R ] sys-apps/acl-2.2.52-r1
[ebuild R ] virtual/acl-0-r1
[ebuild R ] sys-devel/gettext-0.19.4
[ebuild R ] sys-libs/e2fsprogs-libs-1.42.13
[ebuild R ] sys-devel/binutils-2.25.1-r1
[ebuild R ] dev-libs/libgpg-error-1.19
[ebuild N ] dev-util/dialog-1.2.20150920
[ebuild N ] sys-fs/xfsprogs-3.2.4
[ebuild R ] sys-fs/e2fsprogs-1.42.13
[ebuild R ] dev-libs/libgcrypt-1.6.3-r4
[ebuild N ] dev-libs/libassuan-2.2.1
[ebuild N ] dev-libs/libksba-1.3.3
[ebuild N ] app-crypt/mit-krb5-1.13.2-r2
[ebuild N ] app-portage/mirrorselect-2.2.2-r2
[ebuild N ] net-fs/nfs-utils-1.3.1-r4
[ebuild R ] dev-libs/libxslt-1.1.28-r5
[ebuild N ] app-crypt/pinentry-0.9.5
[ebuild N ] virtual/krb5-0-r1
[ebuild N ] sys-block/parted-3.2
[ebuild R ] dev-libs/glib-2.44.1-r1
[ebuild N ] sys-libs/talloc-2.1.5
[ebuild R ] sys-fs/udev-225
[ebuild N ] app-crypt/gnupg-2.0.28
[ebuild N ] virtual/libudev-215-r1
[ebuild N ] sys-libs/tevent-0.9.26
[ebuild N ] app-admin/syslog-ng-3.6.4
[ebuild N ] net-irc/irssi-0.8.17
[ebuild N ] sys-apps/pciutils-3.3.1
[ebuild N ] sys-fs/lvm2-2.02.116
[ebuild N ] sys-libs/libkudzu-1.2.57.1
[ebuild N ] sys-fs/cryptsetup-1.6.5
[ebuild N ] app-misc/livecd-tools-2.1
[ebuild N ] sys-apps/hwsetup-1.2-r3
[ebuild N ] net-fs/cifs-utils-6.4
[ebuild N ] net-fs/samba-3.6.25
The following mask changes are necessary to proceed:
(see "package.unmask" in the portage(5) man page for more details)
# required by net-proxy/ntlmaps (argument)
# /usr/portage/profiles/package.mask:
# Pacho Ramos <pacho@gentoo.org> (06 Jan 2016)
# Multiple bugs and buggy ebuild, bug #533170. Removal in a month.
=net-proxy/ntlmaps-0.9.9-r2
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20160113/.catalyst_lock'
Full build log at /tmp/catalyst-auto.qGMjsY/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2016-01-20 21:14 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2016-01-20 21:14 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage3-alpha-20160120/
to /space/catalyst/tmp/default/livecd-stage1-alpha-20160120/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
Copying livecd-stage1-chroot.sh to /tmp
copying livecd-stage1-chroot.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20160120//tmp
copying chroot-functions.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20160120//tmp
Ensure the file has the executable bit set
Running livecd-stage1-chroot.sh in chroot /space/catalyst/tmp/default/livecd-stage1-alpha-20160120/
>>> Regenerating /etc/ld.so.cache...
Updating portage with USE=''
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
emerge --quiet --usepkg --buildpkg --newuse --update --deep --newuse app-accessibility/brltty app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-editors/mg app-misc/screen app-misc/vlock app-portage/mirrorselect app-text/wgetpaste net-analyzer/traceroute net-dialup/mingetty net-dialup/pptpclient net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-proxy/dante net-proxy/ntlmaps net-proxy/tsocks sys-apps/busybox sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/sdparm sys-block/parted sys-fs/cryptsetup sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/jfsutils sys-fs/lsscsi sys-fs/lvm2 sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links app-misc/livecd-tools
[ebuild R ] sys-libs/zlib-1.2.8-r1
[ebuild R ] sys-libs/ncurses-5.9-r5
[ebuild R ] app-arch/xz-utils-5.0.8
[ebuild R ] app-arch/bzip2-1.0.6-r6
[ebuild R ] dev-libs/expat-2.1.0-r5
[ebuild N ] sys-apps/tcp-wrappers-7.6.22-r1
[ebuild R ] sys-libs/gdbm-1.11
[ebuild N ] sys-apps/hwdata-gentoo-0.4
[ebuild N ] net-dialup/mingetty-1.08
[ebuild N ] dev-libs/libaio-0.3.110
[ebuild N ] dev-util/boost-build-1.56.0
[ebuild N ] net-analyzer/netselect-0.3-r3
[ebuild N ] dev-libs/libbsd-0.7.0
[ebuild N ] dev-libs/eventlog-0.2.12
[ebuild R ] dev-libs/libffi-3.0.13-r1
[ebuild N ] media-libs/libjpeg-turbo-1.4.2
[ebuild N ] app-admin/pwgen-2.07
[ebuild N ] net-analyzer/traceroute-2.0.20
[ebuild N ] net-misc/rdate-1.4-r4
[ebuild N ] sys-apps/hdparm-9.45
[ebuild N ] sys-apps/sdparm-1.07
[ebuild N ] sys-fs/dosfstools-3.0.28
[ebuild N ] sys-fs/jfsutils-1.1.15
[ebuild N ] sys-fs/lsscsi-0.28
[ebuild N ] sys-fs/reiserfsprogs-3.6.24
[ebuild R ] sys-libs/ncurses-5.9-r99
[ebuild R ] sys-libs/cracklib-2.9.1-r1
[ebuild R ] sys-apps/file-5.22
[ebuild N ] sys-apps/keyutils-1.5.9-r1
[ebuild R ] dev-libs/libltdl-2.4.6
[ebuild N ] media-libs/libpng-1.6.19
[ebuild N ] dev-libs/boost-1.56.0-r1
[ebuild N ] virtual/jpeg-0-r2
[ebuild N ] sys-apps/ethtool-3.18
[ebuild R ] sys-apps/busybox-1.24.1
[ebuild N ] app-misc/vlock-2.2.3
[ebuild N ] net-dialup/ppp-2.4.7
[ebuild R ] dev-libs/iniparser-3.1-r1
[ebuild N ] sys-block/thin-provisioning-tools-0.4.1
[ebuild N ] net-libs/libnfsidmap-0.24
[ebuild N ] sys-libs/libcap-ng-0.7.7
[ebuild N ] app-misc/screen-4.3.1-r1
[ebuild N ] net-dialup/rp-pppoe-3.11-r3
[ebuild N ] net-proxy/tsocks-1.8_beta5-r5
[ebuild R ] dev-libs/openssl-1.0.2e
[ebuild N ] dev-libs/libevent-2.0.22
[ebuild N ] dev-libs/libverto-0.2.5-r1
[ebuild N ] dev-libs/pth-2.0.7-r3
[ebuild N ] app-eselect/eselect-lib-bin-symlink-0.1.1
[ebuild N ] app-eselect/eselect-pinentry-0.6
[ebuild N ] net-dialup/pptpclient-1.8.0
[ebuild N ] app-text/wgetpaste-2.25-r3
[ebuild N ] net-proxy/dante-1.1.19-r4
[ebuild R ] sys-libs/readline-6.3_p8-r2
[ebuild R ] sys-apps/openrc-0.18.4
[ebuild R ] net-firewall/iptables-1.4.21-r1
[ebuild R ] sys-apps/kmod-21
[ebuild N ] net-libs/libtirpc-0.2.5
[ebuild N ] sys-libs/gpm-1.20.7-r2
[ebuild N ] net-misc/curl-7.45.0
[ebuild N ] app-accessibility/brltty-5.2
[ebuild N ] app-editors/mg-20150323
[ebuild R ] dev-libs/libpcre-8.38
[ebuild R ] dev-libs/libxml2-2.9.2-r4
[ebuild N ] net-nds/rpcbind-0.2.3-r1
[ebuild N ] net-misc/ntp-4.2.8_p3
[ebuild N ] www-client/links-2.8-r1
[ebuild N ] dev-python/enum34-1.0.4
[ebuild N ] net-proxy/ntlmaps-0.9.9-r2
[ebuild N ] dev-python/pyasn1-0.1.8
[ebuild N ] dev-python/six-1.10.0
[ebuild N ] dev-python/idna-2.0
[ebuild N ] dev-python/ply-3.6-r1
[ebuild N ] dev-python/chardet-2.2.1
[ebuild N ] dev-python/py-1.4.30
[ebuild N ] dev-python/ipaddress-1.0.14
[ebuild N ] dev-python/pycparser-2.14
[ebuild N ] virtual/python-ipaddress-1.0
[ebuild N ] dev-python/cffi-1.2.1
[ebuild N ] dev-python/cryptography-1.0.2
[ebuild N ] dev-python/pyopenssl-0.14
[ebuild N ] dev-python/ndg-httpsclient-0.4.0
[ebuild N ] dev-python/requests-2.8.1
[ebuild N ] dev-python/ssl-fetch-0.3
[ebuild N ] sys-libs/tdb-1.3.8
[ebuild N ] net-misc/dhcpcd-6.10.0
[ebuild R ] sys-apps/util-linux-2.26.2
[ebuild N ] sys-fs/mdadm-3.3.1-r2
[ebuild R ] sys-apps/attr-2.4.47-r2
[ebuild R ] dev-libs/popt-1.16-r2
[ebuild R ] sys-apps/acl-2.2.52-r1
[ebuild R ] virtual/acl-0-r1
[ebuild R ] sys-devel/gettext-0.19.4
[ebuild R ] sys-libs/e2fsprogs-libs-1.42.13
[ebuild R ] sys-devel/binutils-2.25.1-r1
[ebuild R ] dev-libs/libgpg-error-1.19
[ebuild N ] dev-util/dialog-1.2.20150920
[ebuild N ] sys-fs/xfsprogs-3.2.4
[ebuild R ] sys-fs/e2fsprogs-1.42.13
[ebuild R ] dev-libs/libgcrypt-1.6.3-r4
[ebuild N ] dev-libs/libassuan-2.2.1
[ebuild N ] dev-libs/libksba-1.3.3
[ebuild N ] app-crypt/mit-krb5-1.13.2-r2
[ebuild N ] app-portage/mirrorselect-2.2.2-r2
[ebuild N ] net-fs/nfs-utils-1.3.1-r4
[ebuild R ] dev-libs/libxslt-1.1.28-r5
[ebuild N ] app-crypt/pinentry-0.9.5
[ebuild N ] virtual/krb5-0-r1
[ebuild N ] sys-block/parted-3.2
[ebuild R ] dev-libs/glib-2.44.1-r1
[ebuild N ] sys-libs/talloc-2.1.5
[ebuild R ] sys-fs/udev-225
[ebuild N ] app-crypt/gnupg-2.0.28
[ebuild N ] virtual/libudev-215-r1
[ebuild N ] sys-libs/tevent-0.9.26
[ebuild N ] app-admin/syslog-ng-3.6.4
[ebuild N ] net-irc/irssi-0.8.17
[ebuild N ] sys-apps/pciutils-3.3.1
[ebuild N ] sys-fs/lvm2-2.02.116
[ebuild N ] sys-libs/libkudzu-1.2.57.1
[ebuild N ] sys-fs/cryptsetup-1.6.5
[ebuild N ] app-misc/livecd-tools-2.1
[ebuild N ] sys-apps/hwsetup-1.2-r3
[ebuild N ] net-fs/cifs-utils-6.4
[ebuild N ] net-fs/samba-3.6.25
The following mask changes are necessary to proceed:
(see "package.unmask" in the portage(5) man page for more details)
# required by net-proxy/ntlmaps (argument)
# /usr/portage/profiles/package.mask:
# Pacho Ramos <pacho@gentoo.org> (06 Jan 2016)
# Multiple bugs and buggy ebuild, bug #533170. Removal in a month.
=net-proxy/ntlmaps-0.9.9-r2
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20160120/.catalyst_lock'
Full build log at /tmp/catalyst-auto.kTTw4D/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2016-01-27 20:53 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2016-01-27 20:53 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage3-alpha-20160127/
to /space/catalyst/tmp/default/livecd-stage1-alpha-20160127/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
Copying livecd-stage1-chroot.sh to /tmp
copying livecd-stage1-chroot.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20160127//tmp
copying chroot-functions.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20160127//tmp
Ensure the file has the executable bit set
Running livecd-stage1-chroot.sh in chroot /space/catalyst/tmp/default/livecd-stage1-alpha-20160127/
>>> Regenerating /etc/ld.so.cache...
Updating portage with USE=''
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
emerge --quiet --usepkg --buildpkg --newuse --update --deep --newuse app-accessibility/brltty app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-editors/mg app-misc/screen app-misc/vlock app-portage/mirrorselect app-text/wgetpaste net-analyzer/traceroute net-dialup/mingetty net-dialup/pptpclient net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-proxy/dante net-proxy/ntlmaps net-proxy/tsocks sys-apps/busybox sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/sdparm sys-block/parted sys-fs/cryptsetup sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/jfsutils sys-fs/lsscsi sys-fs/lvm2 sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links app-misc/livecd-tools
[ebuild R ] sys-libs/zlib-1.2.8-r1
[ebuild R ] sys-libs/ncurses-5.9-r5
[ebuild R ] app-arch/xz-utils-5.0.8
[ebuild R ] app-arch/bzip2-1.0.6-r6
[ebuild R ] dev-libs/expat-2.1.0-r5
[ebuild N ] sys-apps/tcp-wrappers-7.6.22-r1
[ebuild R ] sys-libs/gdbm-1.11
[ebuild N ] sys-apps/hwdata-gentoo-0.4
[ebuild N ] net-dialup/mingetty-1.08
[ebuild N ] dev-libs/libaio-0.3.110
[ebuild N ] dev-util/boost-build-1.56.0
[ebuild N ] net-analyzer/netselect-0.3-r3
[ebuild N ] dev-libs/libbsd-0.7.0
[ebuild N ] dev-libs/eventlog-0.2.12
[ebuild R ] dev-libs/libffi-3.0.13-r1
[ebuild N ] media-libs/libjpeg-turbo-1.4.2
[ebuild N ] app-admin/pwgen-2.07
[ebuild N ] net-analyzer/traceroute-2.0.20
[ebuild N ] net-misc/rdate-1.4-r4
[ebuild N ] sys-apps/hdparm-9.45
[ebuild N ] sys-apps/sdparm-1.07
[ebuild N ] sys-fs/dosfstools-3.0.28
[ebuild N ] sys-fs/jfsutils-1.1.15
[ebuild N ] sys-fs/lsscsi-0.28
[ebuild N ] sys-fs/reiserfsprogs-3.6.24
[ebuild R ] sys-libs/ncurses-5.9-r99
[ebuild R ] sys-libs/cracklib-2.9.1-r1
[ebuild R ] sys-apps/file-5.22
[ebuild N ] sys-apps/keyutils-1.5.9-r1
[ebuild R ] dev-libs/libltdl-2.4.6
[ebuild N ] media-libs/libpng-1.6.19
[ebuild N ] dev-libs/boost-1.56.0-r1
[ebuild N ] virtual/jpeg-0-r2
[ebuild N ] sys-apps/ethtool-3.18
[ebuild R ] sys-apps/busybox-1.24.1
[ebuild N ] app-misc/vlock-2.2.3
[ebuild N ] net-dialup/ppp-2.4.7
[ebuild R ] dev-libs/iniparser-3.1-r1
[ebuild N ] sys-block/thin-provisioning-tools-0.4.1
[ebuild N ] net-libs/libnfsidmap-0.24
[ebuild N ] sys-libs/libcap-ng-0.7.7
[ebuild N ] app-misc/screen-4.3.1-r1
[ebuild N ] net-dialup/rp-pppoe-3.11-r3
[ebuild N ] net-proxy/tsocks-1.8_beta5-r5
[ebuild R ] dev-libs/openssl-1.0.2e
[ebuild N ] dev-libs/libevent-2.0.22
[ebuild N ] dev-libs/libverto-0.2.5-r1
[ebuild N ] dev-libs/pth-2.0.7-r3
[ebuild N ] app-eselect/eselect-lib-bin-symlink-0.1.1
[ebuild N ] app-eselect/eselect-pinentry-0.6
[ebuild N ] net-dialup/pptpclient-1.8.0
[ebuild N ] app-text/wgetpaste-2.25-r3
[ebuild N ] net-proxy/dante-1.1.19-r4
[ebuild R ] sys-libs/readline-6.3_p8-r2
[ebuild R ] sys-apps/openrc-0.18.4
[ebuild R ] net-firewall/iptables-1.4.21-r1
[ebuild R ] sys-apps/kmod-21
[ebuild N ] net-libs/libtirpc-0.2.5
[ebuild N ] sys-libs/gpm-1.20.7-r2
[ebuild N ] net-misc/curl-7.45.0
[ebuild N ] app-accessibility/brltty-5.2
[ebuild N ] app-editors/mg-20150323
[ebuild R ] dev-libs/libpcre-8.38
[ebuild R ] dev-libs/libxml2-2.9.2-r4
[ebuild N ] net-nds/rpcbind-0.2.3-r1
[ebuild N ] net-misc/ntp-4.2.8_p3
[ebuild N ] www-client/links-2.8-r1
[ebuild N ] dev-python/enum34-1.0.4
[ebuild N ] net-proxy/ntlmaps-0.9.9-r2
[ebuild N ] dev-python/pyasn1-0.1.8
[ebuild N ] dev-python/six-1.10.0
[ebuild N ] dev-python/py-1.4.30
[ebuild N ] dev-python/chardet-2.2.1
[ebuild N ] dev-python/idna-2.0
[ebuild N ] dev-python/ply-3.6-r1
[ebuild N ] dev-python/ipaddress-1.0.14
[ebuild N ] dev-python/pycparser-2.14
[ebuild N ] virtual/python-ipaddress-1.0
[ebuild N ] dev-python/cffi-1.2.1
[ebuild N ] dev-python/cryptography-1.0.2
[ebuild N ] dev-python/pyopenssl-0.14
[ebuild N ] dev-python/ndg-httpsclient-0.4.0
[ebuild N ] dev-python/requests-2.8.1
[ebuild N ] dev-python/ssl-fetch-0.3
[ebuild N ] sys-libs/tdb-1.3.8
[ebuild N ] net-misc/dhcpcd-6.10.0
[ebuild R ] sys-apps/util-linux-2.26.2
[ebuild N ] sys-fs/mdadm-3.3.1-r2
[ebuild R ] sys-apps/attr-2.4.47-r2
[ebuild R ] dev-libs/popt-1.16-r2
[ebuild R ] sys-apps/acl-2.2.52-r1
[ebuild R ] virtual/acl-0-r1
[ebuild R ] sys-devel/gettext-0.19.4
[ebuild R ] sys-libs/e2fsprogs-libs-1.42.13
[ebuild R ] sys-devel/binutils-2.25.1-r1
[ebuild R ] dev-libs/libgpg-error-1.19
[ebuild N ] dev-util/dialog-1.2.20150920
[ebuild N ] sys-fs/xfsprogs-3.2.4
[ebuild R ] sys-fs/e2fsprogs-1.42.13
[ebuild R ] dev-libs/libgcrypt-1.6.3-r4
[ebuild N ] dev-libs/libassuan-2.2.1
[ebuild N ] dev-libs/libksba-1.3.3
[ebuild N ] app-crypt/mit-krb5-1.13.2-r2
[ebuild N ] app-portage/mirrorselect-2.2.2-r2
[ebuild N ] net-fs/nfs-utils-1.3.1-r4
[ebuild R ] dev-libs/libxslt-1.1.28-r5
[ebuild N ] app-crypt/pinentry-0.9.5
[ebuild N ] virtual/krb5-0-r1
[ebuild N ] sys-block/parted-3.2
[ebuild R ] dev-libs/glib-2.44.1-r1
[ebuild N ] sys-libs/talloc-2.1.5
[ebuild R ] sys-fs/udev-225
[ebuild N ] app-crypt/gnupg-2.0.28
[ebuild N ] virtual/libudev-215-r1
[ebuild N ] sys-libs/tevent-0.9.26
[ebuild N ] app-admin/syslog-ng-3.6.4
[ebuild N ] net-irc/irssi-0.8.17
[ebuild N ] sys-apps/pciutils-3.3.1
[ebuild N ] sys-fs/lvm2-2.02.116
[ebuild N ] sys-libs/libkudzu-1.2.57.1
[ebuild N ] sys-fs/cryptsetup-1.6.5
[ebuild N ] app-misc/livecd-tools-2.1
[ebuild N ] sys-apps/hwsetup-1.2-r3
[ebuild N ] net-fs/cifs-utils-6.4
[ebuild N ] net-fs/samba-3.6.25
The following mask changes are necessary to proceed:
(see "package.unmask" in the portage(5) man page for more details)
# required by net-proxy/ntlmaps (argument)
# /usr/portage/profiles/package.mask:
# Pacho Ramos <pacho@gentoo.org> (06 Jan 2016)
# Multiple bugs and buggy ebuild, bug #533170. Removal in a month.
=net-proxy/ntlmaps-0.9.9-r2
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20160127/.catalyst_lock'
Full build log at /tmp/catalyst-auto.KKBMZG/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2016-02-04 0:42 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2016-02-04 0:42 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage3-alpha-20160203/
to /space/catalyst/tmp/default/livecd-stage1-alpha-20160203/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
Copying livecd-stage1-chroot.sh to /tmp
copying livecd-stage1-chroot.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20160203//tmp
copying chroot-functions.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20160203//tmp
Ensure the file has the executable bit set
Running livecd-stage1-chroot.sh in chroot /space/catalyst/tmp/default/livecd-stage1-alpha-20160203/
>>> Regenerating /etc/ld.so.cache...
Updating portage with USE=''
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
emerge --quiet --usepkg --buildpkg --newuse --update --deep --newuse app-accessibility/brltty app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-editors/mg app-misc/screen app-misc/vlock app-portage/mirrorselect app-text/wgetpaste net-analyzer/traceroute net-dialup/mingetty net-dialup/pptpclient net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-proxy/dante net-proxy/ntlmaps net-proxy/tsocks sys-apps/busybox sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/sdparm sys-block/parted sys-fs/cryptsetup sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/jfsutils sys-fs/lsscsi sys-fs/lvm2 sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links app-misc/livecd-tools
[ebuild R ] sys-libs/zlib-1.2.8-r1
[ebuild R ] sys-libs/ncurses-5.9-r5
[ebuild R ] app-arch/xz-utils-5.0.8
[ebuild R ] app-arch/bzip2-1.0.6-r6
[ebuild R ] dev-libs/expat-2.1.0-r5
[ebuild N ] sys-apps/tcp-wrappers-7.6.22-r1
[ebuild R ] sys-libs/gdbm-1.11
[ebuild N ] sys-apps/hwdata-gentoo-0.4
[ebuild N ] net-dialup/mingetty-1.08
[ebuild N ] dev-libs/libaio-0.3.110
[ebuild N ] dev-util/boost-build-1.56.0
[ebuild N ] net-analyzer/netselect-0.3-r3
[ebuild N ] dev-libs/libbsd-0.7.0
[ebuild N ] dev-libs/eventlog-0.2.12
[ebuild R ] dev-libs/libffi-3.0.13-r1
[ebuild N ] media-libs/libjpeg-turbo-1.4.2
[ebuild N ] app-admin/pwgen-2.07
[ebuild N ] net-analyzer/traceroute-2.0.20
[ebuild N ] net-misc/rdate-1.4-r4
[ebuild N ] sys-apps/hdparm-9.45
[ebuild N ] sys-apps/sdparm-1.07
[ebuild N ] sys-fs/dosfstools-3.0.28
[ebuild N ] sys-fs/jfsutils-1.1.15
[ebuild N ] sys-fs/lsscsi-0.28
[ebuild N ] sys-fs/reiserfsprogs-3.6.24
[ebuild R ] sys-libs/ncurses-5.9-r99
[ebuild R ] sys-libs/cracklib-2.9.1-r1
[ebuild R ] sys-apps/file-5.22
[ebuild N ] sys-apps/keyutils-1.5.9-r1
[ebuild R ] dev-libs/libltdl-2.4.6
[ebuild N ] media-libs/libpng-1.6.19
[ebuild N ] dev-libs/boost-1.56.0-r1
[ebuild N ] virtual/jpeg-0-r2
[ebuild N ] sys-apps/ethtool-3.18
[ebuild R ] sys-apps/busybox-1.24.1
[ebuild N ] app-misc/vlock-2.2.3
[ebuild N ] net-dialup/ppp-2.4.7
[ebuild R ] dev-libs/iniparser-3.1-r1
[ebuild N ] sys-block/thin-provisioning-tools-0.4.1
[ebuild N ] net-libs/libnfsidmap-0.24
[ebuild N ] sys-libs/libcap-ng-0.7.7
[ebuild N ] app-misc/screen-4.3.1-r1
[ebuild N ] net-dialup/rp-pppoe-3.11-r3
[ebuild N ] net-proxy/tsocks-1.8_beta5-r5
[ebuild R ] dev-libs/openssl-1.0.2f
[ebuild N ] dev-libs/libevent-2.0.22
[ebuild N ] dev-libs/libverto-0.2.5-r1
[ebuild N ] dev-libs/pth-2.0.7-r3
[ebuild N ] app-eselect/eselect-lib-bin-symlink-0.1.1
[ebuild N ] app-eselect/eselect-pinentry-0.6
[ebuild N ] net-dialup/pptpclient-1.8.0
[ebuild N ] app-text/wgetpaste-2.25-r3
[ebuild N ] net-proxy/dante-1.1.19-r4
[ebuild R ] sys-libs/readline-6.3_p8-r2
[ebuild R ] sys-apps/openrc-0.19.1
[ebuild R ] net-firewall/iptables-1.4.21-r1
[ebuild R ] sys-apps/kmod-21
[ebuild N ] net-libs/libtirpc-0.2.5
[ebuild N ] sys-libs/gpm-1.20.7-r2
[ebuild N ] net-misc/curl-7.45.0
[ebuild N ] app-accessibility/brltty-5.2
[ebuild N ] app-editors/mg-20150323
[ebuild R ] dev-libs/libpcre-8.38
[ebuild R ] dev-libs/libxml2-2.9.2-r4
[ebuild N ] net-nds/rpcbind-0.2.3-r1
[ebuild N ] net-misc/ntp-4.2.8_p6
[ebuild N ] www-client/links-2.8-r1
[ebuild N ] dev-python/enum34-1.0.4
[ebuild N ] dev-python/six-1.10.0
[ebuild N ] net-proxy/ntlmaps-0.9.9-r2
[ebuild N ] dev-python/pyasn1-0.1.8
[ebuild N ] dev-python/idna-2.0
[ebuild N ] dev-python/ply-3.6-r1
[ebuild N ] dev-python/py-1.4.30
[ebuild N ] dev-python/chardet-2.2.1
[ebuild N ] dev-python/ipaddress-1.0.14
[ebuild N ] dev-python/pycparser-2.14
[ebuild N ] virtual/python-ipaddress-1.0
[ebuild N ] dev-python/cffi-1.2.1
[ebuild N ] dev-python/cryptography-1.0.2
[ebuild N ] dev-python/pyopenssl-0.15.1-r1
[ebuild N ] dev-python/ndg-httpsclient-0.4.0
[ebuild N ] dev-python/requests-2.8.1
[ebuild N ] dev-python/ssl-fetch-0.3
[ebuild N ] sys-libs/tdb-1.3.8
[ebuild N ] net-misc/dhcpcd-6.10.0
[ebuild R ] sys-apps/util-linux-2.26.2
[ebuild N ] sys-fs/mdadm-3.3.1-r2
[ebuild R ] sys-apps/attr-2.4.47-r2
[ebuild R ] dev-libs/popt-1.16-r2
[ebuild R ] sys-apps/acl-2.2.52-r1
[ebuild R ] virtual/acl-0-r1
[ebuild R ] sys-devel/gettext-0.19.4
[ebuild R ] sys-libs/e2fsprogs-libs-1.42.13
[ebuild R ] sys-devel/binutils-2.25.1-r1
[ebuild R ] dev-libs/libgpg-error-1.19
[ebuild N ] dev-util/dialog-1.2.20150920
[ebuild N ] sys-fs/xfsprogs-3.2.4
[ebuild R ] sys-fs/e2fsprogs-1.42.13
[ebuild R ] dev-libs/libgcrypt-1.6.3-r4
[ebuild N ] dev-libs/libassuan-2.2.1
[ebuild N ] dev-libs/libksba-1.3.3
[ebuild N ] app-crypt/mit-krb5-1.13.2-r2
[ebuild N ] app-portage/mirrorselect-2.2.2-r2
[ebuild N ] net-fs/nfs-utils-1.3.1-r4
[ebuild R ] dev-libs/libxslt-1.1.28-r5
[ebuild N ] app-crypt/pinentry-0.9.5
[ebuild N ] virtual/krb5-0-r1
[ebuild N ] sys-block/parted-3.2
[ebuild R ] dev-libs/glib-2.44.1-r1
[ebuild N ] sys-libs/talloc-2.1.5
[ebuild R ] sys-fs/udev-225
[ebuild N ] app-crypt/gnupg-2.0.28
[ebuild N ] virtual/libudev-215-r1
[ebuild N ] sys-libs/tevent-0.9.26
[ebuild N ] app-admin/syslog-ng-3.6.4
[ebuild N ] net-irc/irssi-0.8.17
[ebuild N ] sys-apps/pciutils-3.3.1
[ebuild N ] sys-fs/lvm2-2.02.116
[ebuild N ] sys-libs/libkudzu-1.2.57.1
[ebuild N ] sys-fs/cryptsetup-1.6.5
[ebuild N ] app-misc/livecd-tools-2.1
[ebuild N ] sys-apps/hwsetup-1.2-r3
[ebuild N ] net-fs/cifs-utils-6.4
[ebuild N ] net-fs/samba-3.6.25
The following mask changes are necessary to proceed:
(see "package.unmask" in the portage(5) man page for more details)
# required by net-proxy/ntlmaps (argument)
# /usr/portage/profiles/package.mask:
# Pacho Ramos <pacho@gentoo.org> (06 Jan 2016)
# Multiple bugs and buggy ebuild, bug #533170. Removal in a month.
=net-proxy/ntlmaps-0.9.9-r2
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20160203/.catalyst_lock'
Full build log at /tmp/catalyst-auto.7tEZfb/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2016-02-11 0:27 armin76
0 siblings, 0 replies; 63+ messages in thread
From: armin76 @ 2016-02-11 0:27 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage3-alpha-20160210/
to /space/catalyst/tmp/default/livecd-stage1-alpha-20160210/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
Copying livecd-stage1-chroot.sh to /tmp
copying livecd-stage1-chroot.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20160210//tmp
copying chroot-functions.sh to /space/catalyst/tmp/default/livecd-stage1-alpha-20160210//tmp
Ensure the file has the executable bit set
Running livecd-stage1-chroot.sh in chroot /space/catalyst/tmp/default/livecd-stage1-alpha-20160210/
>>> Regenerating /etc/ld.so.cache...
Updating portage with USE=''
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
emerge --quiet --usepkg --buildpkg --newuse --update --deep --newuse app-accessibility/brltty app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-editors/mg app-misc/screen app-misc/vlock app-portage/mirrorselect app-text/wgetpaste net-analyzer/traceroute net-dialup/mingetty net-dialup/pptpclient net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-proxy/dante net-proxy/ntlmaps net-proxy/tsocks sys-apps/busybox sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/sdparm sys-block/parted sys-fs/cryptsetup sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/jfsutils sys-fs/lsscsi sys-fs/lvm2 sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links app-misc/livecd-tools
[ebuild R ] sys-libs/zlib-1.2.8-r1
[ebuild R ] sys-libs/ncurses-5.9-r5
[ebuild R ] app-arch/xz-utils-5.2.2
[ebuild R ] app-arch/bzip2-1.0.6-r6
[ebuild R ] net-libs/libmnl-1.0.3-r1
[ebuild R ] dev-libs/expat-2.1.0-r5
[ebuild N ] sys-apps/tcp-wrappers-7.6.22-r1
[ebuild R ] sys-libs/gdbm-1.11
[ebuild N ] sys-apps/hwdata-gentoo-0.4
[ebuild N ] net-dialup/mingetty-1.08
[ebuild N ] dev-libs/libaio-0.3.110
[ebuild N ] dev-util/boost-build-1.56.0
[ebuild N ] net-analyzer/netselect-0.3-r3
[ebuild N ] dev-libs/libbsd-0.8.2
[ebuild N ] dev-libs/eventlog-0.2.12
[ebuild R ] dev-libs/libffi-3.0.13-r1
[ebuild N ] media-libs/libjpeg-turbo-1.4.2
[ebuild N ] app-admin/pwgen-2.07
[ebuild N ] net-analyzer/traceroute-2.0.20
[ebuild N ] net-misc/rdate-1.4-r4
[ebuild N ] sys-apps/hdparm-9.45
[ebuild N ] sys-apps/sdparm-1.07
[ebuild N ] sys-fs/dosfstools-3.0.28
[ebuild N ] sys-fs/jfsutils-1.1.15
[ebuild N ] sys-fs/lsscsi-0.28
[ebuild N ] sys-fs/reiserfsprogs-3.6.24
[ebuild R ] sys-libs/ncurses-5.9-r99
[ebuild R ] sys-libs/cracklib-2.9.1-r1
[ebuild R ] sys-apps/file-5.22
[ebuild N ] sys-apps/keyutils-1.5.9-r1
[ebuild R ] dev-libs/libltdl-2.4.6
[ebuild N ] media-libs/libpng-1.6.19
[ebuild N ] dev-libs/boost-1.56.0-r1
[ebuild N ] virtual/jpeg-0-r2
[ebuild N ] sys-apps/ethtool-3.18
[ebuild R ] sys-apps/busybox-1.24.1
[ebuild N ] app-misc/vlock-2.2.3
[ebuild N ] net-dialup/ppp-2.4.7
[ebuild R ] dev-libs/openssl-1.0.2f
[ebuild N ] dev-libs/libevent-2.0.22
[ebuild N ] dev-libs/libverto-0.2.5-r1
[ebuild R ] dev-libs/iniparser-3.1-r1
[ebuild N ] sys-block/thin-provisioning-tools-0.4.1
[ebuild N ] net-libs/libnfsidmap-0.24
[ebuild N ] sys-libs/libcap-ng-0.7.7
[ebuild N ] app-misc/screen-4.3.1-r1
[ebuild N ] net-dialup/rp-pppoe-3.11-r3
[ebuild N ] net-proxy/tsocks-1.8_beta5-r5
[ebuild N ] dev-libs/pth-2.0.7-r3
[ebuild N ] app-eselect/eselect-lib-bin-symlink-0.1.1
[ebuild N ] app-eselect/eselect-pinentry-0.6
[ebuild N ] net-dialup/pptpclient-1.8.0
[ebuild N ] app-text/wgetpaste-2.25-r3
[ebuild N ] net-proxy/dante-1.1.19-r4
[ebuild R ] sys-libs/readline-6.3_p8-r2
[ebuild R ] sys-apps/openrc-0.19.1
[ebuild R ] net-firewall/iptables-1.4.21-r1
[ebuild R ] sys-apps/kmod-21
[ebuild N ] net-libs/libtirpc-0.2.5
[ebuild N ] sys-libs/gpm-1.20.7-r2
[ebuild N ] net-misc/curl-7.45.0
[ebuild N ] app-accessibility/brltty-5.2
[ebuild N ] app-editors/mg-20150323
[ebuild R ] dev-libs/libpcre-8.38
[ebuild R ] dev-libs/libxml2-2.9.2-r4
[ebuild N ] net-nds/rpcbind-0.2.3-r1
[ebuild N ] net-misc/ntp-4.2.8_p6
[ebuild N ] www-client/links-2.8-r1
[ebuild N ] dev-python/enum34-1.0.4
[ebuild N ] dev-python/six-1.10.0
[ebuild N ] net-proxy/ntlmaps-0.9.9-r2
[ebuild N ] dev-python/pyasn1-0.1.8
[ebuild N ] dev-python/idna-2.0
[ebuild N ] dev-python/ply-3.6-r1
[ebuild N ] dev-python/chardet-2.2.1
[ebuild N ] dev-python/py-1.4.30
[ebuild N ] dev-python/ipaddress-1.0.14
[ebuild N ] dev-python/pycparser-2.14
[ebuild N ] virtual/python-ipaddress-1.0
[ebuild N ] dev-python/cffi-1.2.1
[ebuild N ] dev-python/cryptography-1.1.2
[ebuild N ] dev-python/pyopenssl-0.15.1-r1
[ebuild N ] dev-python/ndg-httpsclient-0.4.0
[ebuild N ] dev-python/requests-2.8.1
[ebuild N ] dev-python/ssl-fetch-0.3
[ebuild N ] sys-libs/tdb-1.3.8
[ebuild N ] net-misc/dhcpcd-6.10.0
[ebuild R ] sys-apps/util-linux-2.26.2
[ebuild N ] sys-fs/mdadm-3.3.1-r2
[ebuild R ] sys-apps/attr-2.4.47-r2
[ebuild R ] dev-libs/popt-1.16-r2
[ebuild R ] sys-apps/acl-2.2.52-r1
[ebuild R ] virtual/acl-0-r1
[ebuild R ] sys-devel/gettext-0.19.4
[ebuild R ] sys-libs/e2fsprogs-libs-1.42.13
[ebuild R ] sys-devel/binutils-2.25.1-r1
[ebuild R ] dev-libs/libgpg-error-1.19
[ebuild N ] dev-util/dialog-1.2.20150920
[ebuild N ] sys-fs/xfsprogs-3.2.4
[ebuild R ] sys-fs/e2fsprogs-1.42.13
[ebuild R ] dev-libs/libgcrypt-1.6.3-r4
[ebuild N ] dev-libs/libassuan-2.2.1
[ebuild N ] dev-libs/libksba-1.3.3
[ebuild N ] app-crypt/mit-krb5-1.13.2-r2
[ebuild N ] app-portage/mirrorselect-2.2.2-r2
[ebuild N ] net-fs/nfs-utils-1.3.1-r4
[ebuild R ] dev-libs/libxslt-1.1.28-r5
[ebuild N ] app-crypt/pinentry-0.9.5
[ebuild N ] virtual/krb5-0-r1
[ebuild N ] sys-block/parted-3.2
[ebuild R ] dev-libs/glib-2.44.1-r1
[ebuild N ] sys-libs/talloc-2.1.5
[ebuild R ] sys-fs/udev-225
[ebuild N ] app-crypt/gnupg-2.0.28
[ebuild N ] virtual/libudev-215-r1
[ebuild N ] sys-libs/tevent-0.9.26
[ebuild N ] app-admin/syslog-ng-3.6.4
[ebuild N ] net-irc/irssi-0.8.17
[ebuild N ] sys-apps/pciutils-3.3.1
[ebuild N ] sys-fs/lvm2-2.02.116
[ebuild N ] sys-libs/libkudzu-1.2.57.1
[ebuild N ] sys-fs/cryptsetup-1.6.5
[ebuild N ] app-misc/livecd-tools-2.1
[ebuild N ] sys-apps/hwsetup-1.2-r3
[ebuild N ] net-fs/cifs-utils-6.4
[ebuild N ] net-fs/samba-3.6.25
The following mask changes are necessary to proceed:
(see "package.unmask" in the portage(5) man page for more details)
# required by net-proxy/ntlmaps (argument)
# /usr/portage/profiles/package.mask:
# Pacho Ramos <pacho@gentoo.org> (06 Jan 2016)
# Multiple bugs and buggy ebuild, bug #533170. Removal in a month.
=net-proxy/ntlmaps-0.9.9-r2
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/livecd-stage1-alpha-20160210/.catalyst_lock'
Full build log at /tmp/catalyst-auto.bKwSPM/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 63+ messages in thread
end of thread, other threads:[~2016-02-11 0:27 UTC | newest]
Thread overview: 63+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-03-29 0:10 [gentoo-releng-autobuilds] [alpha-auto] Catalyst non-fatal build error - installcd-stage1.spec armin76
-- strict thread matches above, loose matches on Subject: below --
2016-02-11 0:27 armin76
2016-02-04 0:42 armin76
2016-01-27 20:53 armin76
2016-01-20 21:14 armin76
2016-01-13 21:06 armin76
2015-10-01 0:23 armin76
2015-09-24 0:08 armin76
2015-09-17 2:05 armin76
2015-09-09 23:53 armin76
2015-09-03 4:11 armin76
2015-08-27 0:13 armin76
2015-08-20 0:02 armin76
2015-08-13 8:03 armin76
2015-08-06 4:50 armin76
2015-07-30 0:58 armin76
2015-07-19 1:05 armin76
2015-07-12 6:35 armin76
2015-07-04 22:48 armin76
2015-06-27 22:39 armin76
2015-06-20 21:09 armin76
2015-06-13 21:19 armin76
2015-06-06 23:08 armin76
2015-05-30 23:00 armin76
2015-05-24 5:52 armin76
2015-05-17 10:09 armin76
2015-05-09 17:17 armin76
2015-05-02 20:35 armin76
2015-04-25 20:22 armin76
2015-04-19 0:43 armin76
2015-04-11 22:09 armin76
2015-04-04 19:01 armin76
2015-03-22 1:30 armin76
2015-02-21 22:33 armin76
2015-02-14 20:30 armin76
2015-02-07 19:56 armin76
2015-01-31 19:46 armin76
2015-01-18 3:17 armin76
2015-01-10 20:06 armin76
2014-11-01 15:48 armin76
2014-10-25 17:00 armin76
2014-08-16 16:33 armin76
2014-08-09 19:09 armin76
2013-12-21 22:01 armin76
2013-03-16 14:06 armin76
2013-03-09 14:28 armin76
2012-12-29 15:47 armin76
2012-12-22 14:19 armin76
2012-12-15 14:15 armin76
2012-12-08 14:05 armin76
2012-12-01 14:07 armin76
2012-11-24 14:04 armin76
2012-11-17 17:04 armin76
2012-11-10 14:04 armin76
2012-10-20 13:00 armin76
2012-08-25 21:53 armin76
2012-08-18 22:53 armin76
2012-08-11 20:29 armin76
2012-08-04 15:48 armin76
2012-07-28 15:18 armin76
2011-07-23 11:47 armin76
2011-04-02 13:08 armin76
2011-01-29 13:57 armin76
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox