From: armin76@gentoo.org
To: releng@gentoo.org,gentoo-releng-autobuilds@lists.gentoo.org
Subject: [gentoo-releng-autobuilds] [alpha-auto] Catalyst fatal build error - stage1.spec
Date: Sat, 23 Nov 2013 03:25:21 +0100 [thread overview]
Message-ID: <E1Vk2uP-0008TZ-Jy@monolith.freenet-rz.de> (raw)
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-stage1-alpha-20131123/
clearing chroot ...
Emptying directory /space/catalyst/tmp/default/stage1-alpha-20131123/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-stage1-alpha-20131123/
Emptying directory /space/catalyst/tmp/default/stage1-alpha-20131123/
Starting tar extract from /space/catalyst/builds/default/stage3-alpha-latest.tar.bz2
to /space/catalyst/tmp/default/stage1-alpha-20131123/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/space/catalyst/snapshot_cache/20131123/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
lockfile does not exist '/space/catalyst/snapshot_cache/20131123/.catalyst_lock'
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /space/catalyst/tmp/default/stage1-alpha-20131123///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to ./tmp
copying stage1-chroot.sh to /space/catalyst/tmp/default/stage1-alpha-20131123/./tmp
copying chroot-functions.sh to /space/catalyst/tmp/default/stage1-alpha-20131123/./tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /space/catalyst/tmp/default/stage1-alpha-20131123/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --oneshot --nodeps --update sys-apps/portage
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2 for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2 to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep virtual/shadow sys-devel/binutils app-shells/bash sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less virtual/udev sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/ncurses-5.9-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r3 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20130111 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.12-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2013d to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-3-r3 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.11 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/make-3.82-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.4.2-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.5 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] dev-util/gperf-3.0.4
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-9 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-5.1.2 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.11 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.20 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.2_p1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.6-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-0.4 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.14 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20120127084908 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-457 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.2-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/util-linux-2.22.2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.37 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.4.3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.2_p45 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.15-r3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.3.8 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.0.5-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] virtual/libc-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.7.3-r1 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-3.9 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.26-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.2 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.3.2 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.0.9-r3 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.14 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.18.2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.2.5-r3 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.5-r3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.7 to /tmp/stage1root/
[ebuild N ] app-admin/python-updater-0.11 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-devel/libperl-5.10.1 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.12.4-r1 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.7 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.13.4 to /tmp/stage1root/
[ebuild N ] sys-fs/udev-208 to /tmp/stage1root/
[ebuild N ] virtual/udev-208 to /tmp/stage1root/
[ebuild U ] sys-fs/udev-208 [204]
[ebuild U ] virtual/udev-208 [200]
[ebuild N ] sys-apps/hwids-20130915.1 to /tmp/stage1root/
[ebuild N ] sys-apps/hwids-20130915.1
For /etc/portage:
The following USE changes are necessary to proceed:
(see "package.use" in the portage(5) man page for more details)
# required by sys-fs/udev-208
# required by virtual/udev-208
# required by virtual/udev (argument)
=sys-apps/hwids-20130915.1 udev
For /etc/portage:
The following USE changes are necessary to proceed:
(see "package.use" in the portage(5) man page for more details)
# required by sys-fs/udev-208
# required by virtual/udev-208
# required by sys-apps/hwids-20130915.1[udev]
# required by sys-fs/udev-208
# required by virtual/udev-208
# required by virtual/udev (argument)
=sys-apps/hwids-20130915.1 udev
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1235, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 226, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1295, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1240, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/stage1-alpha-20131123/.catalyst_lock'
Full build log at /tmp/catalyst-auto.30684/log/stage1.log
next reply other threads:[~2013-11-23 2:25 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-23 2:25 armin76 [this message]
-- strict thread matches above, loose matches on Subject: below --
2016-03-23 17:46 [gentoo-releng-autobuilds] [alpha-auto] Catalyst fatal build error - stage1.spec armin76
2016-03-23 15:58 armin76
2015-12-23 3:39 armin76
2015-12-16 8:23 armin76
2015-12-09 9:26 armin76
2015-12-02 6:25 armin76
2013-11-30 2:25 armin76
2013-11-16 2:26 armin76
2013-08-17 1:23 armin76
2013-08-10 1:24 armin76
2013-08-03 1:34 armin76
2013-02-16 2:26 armin76
2013-01-12 12:40 armin76
2012-09-29 2:00 armin76
2012-07-07 1:32 armin76
2012-06-23 3:32 armin76
2012-06-16 3:33 armin76
2012-06-09 2:53 armin76
2012-05-26 3:21 armin76
2012-05-19 2:43 armin76
2012-04-21 1:34 armin76
2012-04-14 1:34 armin76
2012-04-07 1:33 armin76
2012-03-31 1:31 armin76
2011-11-26 4:17 armin76
2011-11-19 4:18 armin76
2011-08-13 1:27 armin76
2011-08-06 1:30 armin76
2011-07-30 1:27 armin76
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1Vk2uP-0008TZ-Jy@monolith.freenet-rz.de \
--to=armin76@gentoo.org \
--cc=gentoo-releng-autobuilds@lists.gentoo.org \
--cc=releng@gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox