* [gentoo-releng-autobuilds] [alpha-auto] Catalyst fatal build error - stage2.spec
@ 2011-04-16 4:47 armin76
0 siblings, 0 replies; 8+ messages in thread
From: armin76 @ 2011-04-16 4:47 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-stage2-alpha-20110416/
clearing chroot ...
Emptying directory /space/catalyst/tmp/default/stage2-alpha-20110416/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage1-alpha-20110416/tmp/stage1root/
to /space/catalyst/tmp/default/stage2-alpha-20110416/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying stage2-chroot.sh to /space/catalyst/tmp/default/stage2-alpha-20110416/tmp/
copying chroot-functions.sh to /space/catalyst/tmp/default/stage2-alpha-20110416/tmp/
Running stage2-chroot.sh in chroot /space/catalyst/tmp/default/stage2-alpha-20110416/
>>> Regenerating /etc/ld.so.cache...
Gentoo Linux; http://www.gentoo.org/
Copyright 1999-2010 Gentoo Foundation; Distributed under the GPLv2
-------------------------------------------------------------------------------
[[ (0/3) Locating packages ]]
* Using baselayout : sys-apps/baselayout
* Using portage : >=sys-apps/portage-2.1.6.8
* Using os-headers : >=sys-kernel/linux-headers-2.6.36.1
* Using binutils : sys-devel/binutils
* Using gcc : sys-devel/gcc
* Using gettext : gettext
* Using libc : virtual/libc
* Using texinfo : sys-apps/texinfo
* Using zlib : sys-libs/zlib
* Using ncurses : sys-libs/ncurses
-------------------------------------------------------------------------------
[[ (1/3) Configuring environment ]]
* GENTOO_MIRRORS="http://distfiles.gentoo.org"
* PORTDIR="/usr/portage"
* DISTDIR="/usr/portage/distfiles"
* PKGDIR="/usr/portage/packages"
* PORTAGE_TMPDIR="/var/tmp"
* CFLAGS="-mieee -pipe -O2 -mcpu=ev4"
* CHOST="alpha-unknown-linux-gnu"
* CXXFLAGS="-mieee -pipe -O2 -mcpu=ev4"
* MAKEOPTS="-j4"
* ACCEPT_KEYWORDS="alpha"
* FEATURES="assume-digests binpkg-logs distlocks fixlafiles fixpackages news nodoc noinfo noman parallel-fetch protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch"
-------------------------------------------------------------------------------
[[ (2/3) Updating portage ]]
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.1.9.42
>>> Installing (1 of 1) sys-apps/portage-2.1.9.42
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
-------------------------------------------------------------------------------
[[ (3/3) Emerging packages ]]
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
>>> Verifying ebuild manifests
>>> Starting parallel fetch
>>> Emerging (1 of 9) app-arch/xz-utils-5.0.1
>>> Failed to emerge app-arch/xz-utils-5.0.1, Log file:
>>> '/var/tmp/portage/app-arch/xz-utils-5.0.1/temp/build.log'
* Package: app-arch/xz-utils-5.0.1
* Repository: gentoo
* USE: alpha bootstrap elibc_glibc kernel_linux nls userland_GNU
* FEATURES: sandbox
XZ Utils 5.0.1
System type:
checking build system type... alpha-unknown-linux-gnu
checking host system type... alpha-unknown-linux-gnu
Configure options:
checking if debugging code should be compiled... no
checking which encoders to build... lzma1 lzma2 delta x86 powerpc ia64 arm armthumb sparc
checking which decoders to build... lzma1 lzma2 delta x86 powerpc ia64 arm armthumb sparc
checking which match finders to build... hc3 hc4 bt2 bt3 bt4
checking which integrity checks to build... crc32 crc64 sha256
checking if assembler optimizations should be used... no
checking if small size is preferred over speed... no
checking if threading support is wanted... no
checking how much RAM to assume if the real amount is unknown... 128 MiB
checking for a shell that conforms to POSIX... /bin/sh
Initializing Automake:
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether ln -s works... yes
checking for style of include used by make... GNU
checking for alpha-unknown-linux-gnu-gcc... alpha-unknown-linux-gnu-gcc
checking whether the C compiler works... no
configure: error: in `/var/tmp/portage/app-arch/xz-utils-5.0.1/work/xz-5.0.1':
configure: error: C compiler cannot create executables
See `config.log' for more details
!!! Please attach the following file when seeking support:
!!! /var/tmp/portage/app-arch/xz-utils-5.0.1/work/xz-5.0.1/config.log
* ERROR: app-arch/xz-utils-5.0.1 failed (configure phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 56: Called src_configure
* environment, line 2205: Called econf '--enable-nls' '--disable-threads' '--disable-static'
* ebuild.sh, line 557: Called die
* The specific snippet of code:
* die "econf failed"
*
* If you need support, post the output of 'emerge --info =app-arch/xz-utils-5.0.1',
* the complete build log and the output of 'emerge -pqv =app-arch/xz-utils-5.0.1'.
* The complete build log is located at '/var/tmp/portage/app-arch/xz-utils-5.0.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-arch/xz-utils-5.0.1/temp/environment'.
* S: '/var/tmp/portage/app-arch/xz-utils-5.0.1/work/xz-5.0.1'
* Messages for package app-arch/xz-utils-5.0.1:
* ERROR: app-arch/xz-utils-5.0.1 failed (configure phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 56: Called src_configure
* environment, line 2205: Called econf '--enable-nls' '--disable-threads' '--disable-static'
* ebuild.sh, line 557: Called die
* The specific snippet of code:
* die "econf failed"
*
* If you need support, post the output of 'emerge --info =app-arch/xz-utils-5.0.1',
* the complete build log and the output of 'emerge -pqv =app-arch/xz-utils-5.0.1'.
* The complete build log is located at '/var/tmp/portage/app-arch/xz-utils-5.0.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-arch/xz-utils-5.0.1/temp/environment'.
* S: '/var/tmp/portage/app-arch/xz-utils-5.0.1/work/xz-5.0.1'
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1207, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1212, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage2
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/stage2-alpha-20110416/.catalyst_lock'
Full build log at /tmp/catalyst-auto.30707/log/stage2.log
^ permalink raw reply [flat|nested] 8+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst fatal build error - stage2.spec
@ 2011-10-15 5:18 armin76
0 siblings, 0 replies; 8+ messages in thread
From: armin76 @ 2011-10-15 5:18 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Setting snapshot_cache to config file value "/space/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/space/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache metadata_overlay pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Use of metadata_overlay module for portage enabled.
Envscript support enabled.
Using target: stage2
Building natively for alpha
Source path set to /space/catalyst/tmp/default/stage1-alpha-20111015/tmp/stage1root/
If this is not desired, remove this directory or turn of seedcache in the options of catalyst.conf
the source path will then be /space/catalyst/builds/default/stage1-alpha-20111015.tar.bz2
Caching snapshot to /space/catalyst/snapshot_cache/20111015/
The autoresume path is /space/catalyst/tmp/default/.autoresume-stage2-alpha-20111015/
Location of the package cache is /space/catalyst/packages/default/stage2-alpha-20111015/
Location of the kerncache is /space/catalyst/kerncache/default/stage2-alpha-20111015/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-stage2-alpha-20111015/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-stage2-alpha-20111015/
clearing chroot ...
Emptying directory /space/catalyst/tmp/default/stage2-alpha-20111015/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage1-alpha-20111015/tmp/stage1root/
to /space/catalyst/tmp/default/stage2-alpha-20111015/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying stage2-chroot.sh to /space/catalyst/tmp/default/stage2-alpha-20111015/tmp/
copying chroot-functions.sh to /space/catalyst/tmp/default/stage2-alpha-20111015/tmp/
Running stage2-chroot.sh in chroot /space/catalyst/tmp/default/stage2-alpha-20111015/
>>> Regenerating /etc/ld.so.cache...
Gentoo Linux; http://www.gentoo.org/
Copyright 1999-2011 Gentoo Foundation; Distributed under the GPLv2
-------------------------------------------------------------------------------
[[ (0/3) Locating packages ]]
* Using baselayout : sys-apps/baselayout
* Using portage : portage
* Using os-headers : >=sys-kernel/linux-headers-2.6.36.1
* Using binutils : sys-devel/binutils
* Using gcc : sys-devel/gcc
* Using gettext : gettext
* Using libc : virtual/libc
* Using texinfo : sys-apps/texinfo
* Using zlib : sys-libs/zlib
* Using ncurses : sys-libs/ncurses
-------------------------------------------------------------------------------
[[ (1/3) Configuring environment ]]
-------------------------------------------------------------------------------
[[ (2/3) Updating portage ]]
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.1.10.11
>>> Installing (1 of 1) sys-apps/portage-2.1.10.11
-------------------------------------------------------------------------------
[[ (3/3) Emerging packages ]]
>>> Verifying ebuild manifests
>>> Starting parallel fetch
>>> Emerging (1 of 10) app-arch/xz-utils-5.0.3
>>> Failed to emerge app-arch/xz-utils-5.0.3, Log file:
>>> '/var/tmp/portage/app-arch/xz-utils-5.0.3/temp/build.log'
* Package: app-arch/xz-utils-5.0.3
* Repository: gentoo
* USE: alpha bootstrap elibc_glibc kernel_linux nls userland_GNU
* FEATURES: sandbox
XZ Utils 5.0.3
System type:
checking build system type... alpha-unknown-linux-gnu
checking host system type... alpha-unknown-linux-gnu
Configure options:
checking if debugging code should be compiled... no
checking which encoders to build... lzma1 lzma2 delta x86 powerpc ia64 arm armthumb sparc
checking which decoders to build... lzma1 lzma2 delta x86 powerpc ia64 arm armthumb sparc
checking which match finders to build... hc3 hc4 bt2 bt3 bt4
checking which integrity checks to build... crc32 crc64 sha256
checking if assembler optimizations should be used... no
checking if small size is preferred over speed... no
checking if threading support is wanted... no
checking how much RAM to assume if the real amount is unknown... 128 MiB
checking for a shell that conforms to POSIX... /bin/sh
Initializing Automake:
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether ln -s works... yes
checking for style of include used by make... GNU
checking for alpha-unknown-linux-gnu-gcc... alpha-unknown-linux-gnu-gcc
checking whether the C compiler works... no
configure: error: in `/var/tmp/portage/app-arch/xz-utils-5.0.3/work/xz-5.0.3':
configure: error: C compiler cannot create executables
See `config.log' for more details
!!! Please attach the following file when seeking support:
!!! /var/tmp/portage/app-arch/xz-utils-5.0.3/work/xz-5.0.3/config.log
* ERROR: app-arch/xz-utils-5.0.3 failed (configure phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 56: Called src_configure
* environment, line 2247: Called econf '--enable-nls' '--disable-threads' '--disable-static'
* ebuild.sh, line 561: Called die
* The specific snippet of code:
* die "econf failed"
*
* If you need support, post the output of 'emerge --info =app-arch/xz-utils-5.0.3',
* the complete build log and the output of 'emerge -pqv =app-arch/xz-utils-5.0.3'.
* The complete build log is located at '/var/tmp/portage/app-arch/xz-utils-5.0.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-arch/xz-utils-5.0.3/temp/environment'.
* S: '/var/tmp/portage/app-arch/xz-utils-5.0.3/work/xz-5.0.3'
* Messages for package app-arch/xz-utils-5.0.3:
* ERROR: app-arch/xz-utils-5.0.3 failed (configure phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 56: Called src_configure
* environment, line 2247: Called econf '--enable-nls' '--disable-threads' '--disable-static'
* ebuild.sh, line 561: Called die
* The specific snippet of code:
* die "econf failed"
*
* If you need support, post the output of 'emerge --info =app-arch/xz-utils-5.0.3',
* the complete build log and the output of 'emerge -pqv =app-arch/xz-utils-5.0.3'.
* The complete build log is located at '/var/tmp/portage/app-arch/xz-utils-5.0.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-arch/xz-utils-5.0.3/temp/environment'.
* S: '/var/tmp/portage/app-arch/xz-utils-5.0.3/work/xz-5.0.3'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1207, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1212, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage2
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/stage2-alpha-20111015/.catalyst_lock'
Full build log at /tmp/catalyst-auto.27993/log/stage2.log
^ permalink raw reply [flat|nested] 8+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst fatal build error - stage2.spec
@ 2011-10-22 5:14 armin76
0 siblings, 0 replies; 8+ messages in thread
From: armin76 @ 2011-10-22 5:14 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Setting snapshot_cache to config file value "/space/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/space/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache metadata_overlay pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Use of metadata_overlay module for portage enabled.
Envscript support enabled.
Using target: stage2
Building natively for alpha
Source path set to /space/catalyst/tmp/default/stage1-alpha-20111022/tmp/stage1root/
If this is not desired, remove this directory or turn of seedcache in the options of catalyst.conf
the source path will then be /space/catalyst/builds/default/stage1-alpha-20111022.tar.bz2
Caching snapshot to /space/catalyst/snapshot_cache/20111022/
The autoresume path is /space/catalyst/tmp/default/.autoresume-stage2-alpha-20111022/
Location of the package cache is /space/catalyst/packages/default/stage2-alpha-20111022/
Location of the kerncache is /space/catalyst/kerncache/default/stage2-alpha-20111022/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-stage2-alpha-20111022/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-stage2-alpha-20111022/
clearing chroot ...
Emptying directory /space/catalyst/tmp/default/stage2-alpha-20111022/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage1-alpha-20111022/tmp/stage1root/
to /space/catalyst/tmp/default/stage2-alpha-20111022/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying stage2-chroot.sh to /space/catalyst/tmp/default/stage2-alpha-20111022/tmp/
copying chroot-functions.sh to /space/catalyst/tmp/default/stage2-alpha-20111022/tmp/
Running stage2-chroot.sh in chroot /space/catalyst/tmp/default/stage2-alpha-20111022/
>>> Regenerating /etc/ld.so.cache...
Gentoo Linux; http://www.gentoo.org/
Copyright 1999-2011 Gentoo Foundation; Distributed under the GPLv2
-------------------------------------------------------------------------------
[[ (0/3) Locating packages ]]
* Using baselayout : sys-apps/baselayout
* Using portage : portage
* Using os-headers : >=sys-kernel/linux-headers-2.6.36.1
* Using binutils : sys-devel/binutils
* Using gcc : sys-devel/gcc
* Using gettext : gettext
* Using libc : virtual/libc
* Using texinfo : sys-apps/texinfo
* Using zlib : sys-libs/zlib
* Using ncurses : sys-libs/ncurses
-------------------------------------------------------------------------------
[[ (1/3) Configuring environment ]]
-------------------------------------------------------------------------------
[[ (2/3) Updating portage ]]
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.1.10.11
>>> Installing (1 of 1) sys-apps/portage-2.1.10.11
-------------------------------------------------------------------------------
[[ (3/3) Emerging packages ]]
>>> Verifying ebuild manifests
>>> Starting parallel fetch
>>> Emerging (1 of 10) app-arch/xz-utils-5.0.3
>>> Failed to emerge app-arch/xz-utils-5.0.3, Log file:
>>> '/var/tmp/portage/app-arch/xz-utils-5.0.3/temp/build.log'
* Package: app-arch/xz-utils-5.0.3
* Repository: gentoo
* USE: alpha bootstrap elibc_glibc kernel_linux nls userland_GNU
* FEATURES: sandbox
XZ Utils 5.0.3
System type:
checking build system type... alpha-unknown-linux-gnu
checking host system type... alpha-unknown-linux-gnu
Configure options:
checking if debugging code should be compiled... no
checking which encoders to build... lzma1 lzma2 delta x86 powerpc ia64 arm armthumb sparc
checking which decoders to build... lzma1 lzma2 delta x86 powerpc ia64 arm armthumb sparc
checking which match finders to build... hc3 hc4 bt2 bt3 bt4
checking which integrity checks to build... crc32 crc64 sha256
checking if assembler optimizations should be used... no
checking if small size is preferred over speed... no
checking if threading support is wanted... no
checking how much RAM to assume if the real amount is unknown... 128 MiB
checking for a shell that conforms to POSIX... /bin/sh
Initializing Automake:
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether ln -s works... yes
checking for style of include used by make... GNU
checking for alpha-unknown-linux-gnu-gcc... alpha-unknown-linux-gnu-gcc
checking whether the C compiler works... no
configure: error: in `/var/tmp/portage/app-arch/xz-utils-5.0.3/work/xz-5.0.3':
configure: error: C compiler cannot create executables
See `config.log' for more details
!!! Please attach the following file when seeking support:
!!! /var/tmp/portage/app-arch/xz-utils-5.0.3/work/xz-5.0.3/config.log
* ERROR: app-arch/xz-utils-5.0.3 failed (configure phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 56: Called src_configure
* environment, line 2216: Called econf '--enable-nls' '--disable-threads' '--disable-static'
* ebuild.sh, line 561: Called die
* The specific snippet of code:
* die "econf failed"
*
* If you need support, post the output of 'emerge --info =app-arch/xz-utils-5.0.3',
* the complete build log and the output of 'emerge -pqv =app-arch/xz-utils-5.0.3'.
* The complete build log is located at '/var/tmp/portage/app-arch/xz-utils-5.0.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-arch/xz-utils-5.0.3/temp/environment'.
* S: '/var/tmp/portage/app-arch/xz-utils-5.0.3/work/xz-5.0.3'
* Messages for package app-arch/xz-utils-5.0.3:
* ERROR: app-arch/xz-utils-5.0.3 failed (configure phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 56: Called src_configure
* environment, line 2216: Called econf '--enable-nls' '--disable-threads' '--disable-static'
* ebuild.sh, line 561: Called die
* The specific snippet of code:
* die "econf failed"
*
* If you need support, post the output of 'emerge --info =app-arch/xz-utils-5.0.3',
* the complete build log and the output of 'emerge -pqv =app-arch/xz-utils-5.0.3'.
* The complete build log is located at '/var/tmp/portage/app-arch/xz-utils-5.0.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-arch/xz-utils-5.0.3/temp/environment'.
* S: '/var/tmp/portage/app-arch/xz-utils-5.0.3/work/xz-5.0.3'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1207, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1212, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage2
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/stage2-alpha-20111022/.catalyst_lock'
Full build log at /tmp/catalyst-auto.23311/log/stage2.log
^ permalink raw reply [flat|nested] 8+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst fatal build error - stage2.spec
@ 2011-10-29 5:33 armin76
0 siblings, 0 replies; 8+ messages in thread
From: armin76 @ 2011-10-29 5:33 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Setting snapshot_cache to config file value "/space/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/space/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache metadata_overlay pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Use of metadata_overlay module for portage enabled.
Envscript support enabled.
Using target: stage2
Building natively for alpha
Source path set to /space/catalyst/tmp/default/stage1-alpha-20111029/tmp/stage1root/
If this is not desired, remove this directory or turn of seedcache in the options of catalyst.conf
the source path will then be /space/catalyst/builds/default/stage1-alpha-20111029.tar.bz2
Caching snapshot to /space/catalyst/snapshot_cache/20111029/
The autoresume path is /space/catalyst/tmp/default/.autoresume-stage2-alpha-20111029/
Location of the package cache is /space/catalyst/packages/default/stage2-alpha-20111029/
Location of the kerncache is /space/catalyst/kerncache/default/stage2-alpha-20111029/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-stage2-alpha-20111029/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-stage2-alpha-20111029/
clearing chroot ...
Emptying directory /space/catalyst/tmp/default/stage2-alpha-20111029/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage1-alpha-20111029/tmp/stage1root/
to /space/catalyst/tmp/default/stage2-alpha-20111029/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying stage2-chroot.sh to /space/catalyst/tmp/default/stage2-alpha-20111029/tmp/
copying chroot-functions.sh to /space/catalyst/tmp/default/stage2-alpha-20111029/tmp/
Running stage2-chroot.sh in chroot /space/catalyst/tmp/default/stage2-alpha-20111029/
>>> Regenerating /etc/ld.so.cache...
Gentoo Linux; http://www.gentoo.org/
Copyright 1999-2011 Gentoo Foundation; Distributed under the GPLv2
-------------------------------------------------------------------------------
[[ (0/3) Locating packages ]]
* Using baselayout : sys-apps/baselayout
* Using portage : portage
* Using os-headers : >=sys-kernel/linux-headers-2.6.36.1
* Using binutils : sys-devel/binutils
* Using gcc : sys-devel/gcc
* Using gettext : gettext
* Using libc : virtual/libc
* Using texinfo : sys-apps/texinfo
* Using zlib : sys-libs/zlib
* Using ncurses : sys-libs/ncurses
-------------------------------------------------------------------------------
[[ (1/3) Configuring environment ]]
-------------------------------------------------------------------------------
[[ (2/3) Updating portage ]]
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.1.10.11
>>> Installing (1 of 1) sys-apps/portage-2.1.10.11
-------------------------------------------------------------------------------
[[ (3/3) Emerging packages ]]
>>> Verifying ebuild manifests
>>> Starting parallel fetch
>>> Emerging (1 of 10) app-arch/xz-utils-5.0.3
>>> Failed to emerge app-arch/xz-utils-5.0.3, Log file:
>>> '/var/tmp/portage/app-arch/xz-utils-5.0.3/temp/build.log'
* Package: app-arch/xz-utils-5.0.3
* Repository: gentoo
* USE: alpha bootstrap elibc_glibc kernel_linux nls userland_GNU
* FEATURES: sandbox
XZ Utils 5.0.3
System type:
checking build system type... alpha-unknown-linux-gnu
checking host system type... alpha-unknown-linux-gnu
Configure options:
checking if debugging code should be compiled... no
checking which encoders to build... lzma1 lzma2 delta x86 powerpc ia64 arm armthumb sparc
checking which decoders to build... lzma1 lzma2 delta x86 powerpc ia64 arm armthumb sparc
checking which match finders to build... hc3 hc4 bt2 bt3 bt4
checking which integrity checks to build... crc32 crc64 sha256
checking if assembler optimizations should be used... no
checking if small size is preferred over speed... no
checking if threading support is wanted... no
checking how much RAM to assume if the real amount is unknown... 128 MiB
checking for a shell that conforms to POSIX... /bin/sh
Initializing Automake:
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether ln -s works... yes
checking for style of include used by make... GNU
checking for alpha-unknown-linux-gnu-gcc... alpha-unknown-linux-gnu-gcc
checking whether the C compiler works... no
configure: error: in `/var/tmp/portage/app-arch/xz-utils-5.0.3/work/xz-5.0.3':
configure: error: C compiler cannot create executables
See `config.log' for more details
!!! Please attach the following file when seeking support:
!!! /var/tmp/portage/app-arch/xz-utils-5.0.3/work/xz-5.0.3/config.log
* ERROR: app-arch/xz-utils-5.0.3 failed (configure phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 56: Called src_configure
* environment, line 2214: Called econf '--enable-nls' '--disable-threads' '--disable-static'
* ebuild.sh, line 561: Called die
* The specific snippet of code:
* die "econf failed"
*
* If you need support, post the output of 'emerge --info =app-arch/xz-utils-5.0.3',
* the complete build log and the output of 'emerge -pqv =app-arch/xz-utils-5.0.3'.
* The complete build log is located at '/var/tmp/portage/app-arch/xz-utils-5.0.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-arch/xz-utils-5.0.3/temp/environment'.
* S: '/var/tmp/portage/app-arch/xz-utils-5.0.3/work/xz-5.0.3'
* Messages for package app-arch/xz-utils-5.0.3:
* ERROR: app-arch/xz-utils-5.0.3 failed (configure phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 56: Called src_configure
* environment, line 2214: Called econf '--enable-nls' '--disable-threads' '--disable-static'
* ebuild.sh, line 561: Called die
* The specific snippet of code:
* die "econf failed"
*
* If you need support, post the output of 'emerge --info =app-arch/xz-utils-5.0.3',
* the complete build log and the output of 'emerge -pqv =app-arch/xz-utils-5.0.3'.
* The complete build log is located at '/var/tmp/portage/app-arch/xz-utils-5.0.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-arch/xz-utils-5.0.3/temp/environment'.
* S: '/var/tmp/portage/app-arch/xz-utils-5.0.3/work/xz-5.0.3'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1207, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1212, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage2
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/stage2-alpha-20111029/.catalyst_lock'
Full build log at /tmp/catalyst-auto.27025/log/stage2.log
^ permalink raw reply [flat|nested] 8+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst fatal build error - stage2.spec
@ 2013-02-23 8:36 armin76
0 siblings, 0 replies; 8+ messages in thread
From: armin76 @ 2013-02-23 8:36 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Setting snapshot_cache to config file value "/space/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/space/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage2
Building natively for alpha
Source path set to /space/catalyst/tmp/default/stage1-alpha-20130223/tmp/stage1root/
If this is not desired, remove this directory or turn of seedcache in the options of catalyst.conf
the source path will then be /space/catalyst/builds/default/stage1-alpha-20130223.tar.bz2
Caching snapshot to /space/catalyst/snapshot_cache/20130223/
The autoresume path is /space/catalyst/tmp/default/.autoresume-stage2-alpha-20130223/
Location of the package cache is /space/catalyst/packages/default/stage2-alpha-20130223/
Location of the kerncache is /space/catalyst/kerncache/default/stage2-alpha-20130223/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-stage2-alpha-20130223/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-stage2-alpha-20130223/
clearing chroot ...
Emptying directory /space/catalyst/tmp/default/stage2-alpha-20130223/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage1-alpha-20130223/tmp/stage1root/
to /space/catalyst/tmp/default/stage2-alpha-20130223/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
Copying stage2-chroot.sh to ./tmp
copying stage2-chroot.sh to /space/catalyst/tmp/default/stage2-alpha-20130223/./tmp
copying chroot-functions.sh to /space/catalyst/tmp/default/stage2-alpha-20130223/./tmp
Ensure the file has the executable bit set
Running stage2-chroot.sh in chroot /space/catalyst/tmp/default/stage2-alpha-20130223/
>>> Regenerating /etc/ld.so.cache...
Gentoo Linux; http://www.gentoo.org/
Copyright 1999-2012 Gentoo Foundation; Distributed under the GPLv2
-------------------------------------------------------------------------------
[[ (0/3) Locating packages ]]
* Using baselayout : >=sys-apps/baselayout-2
* Using portage : portage
* Using os-headers : >=sys-kernel/linux-headers-3.6
* Using binutils : sys-devel/binutils
* Using gcc : sys-devel/gcc
* Using gettext : gettext
* Using libc : virtual/libc
* Using texinfo : sys-apps/texinfo
* Using zlib : zlib
* Using ncurses : ncurses
-------------------------------------------------------------------------------
[[ (1/3) Configuring environment ]]
-------------------------------------------------------------------------------
[[ (2/3) Updating portage ]]
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.1.11.50
>>> Installing (1 of 1) sys-apps/portage-2.1.11.50
-------------------------------------------------------------------------------
[[ (3/3) Emerging packages ]]
>>> Verifying ebuild manifests
>>> Starting parallel fetch
>>> Emerging (1 of 10) sys-libs/zlib-1.2.7
>>> Failed to emerge sys-libs/zlib-1.2.7, Log file:
>>> '/var/tmp/portage/sys-libs/zlib-1.2.7/temp/build.log'
* Package: sys-libs/zlib-1.2.7
* Repository: gentoo
* USE: alpha bootstrap elibc_glibc kernel_linux userland_GNU
* FEATURES: sandbox
./configure --shared --prefix=/usr --libdir=/usr/lib --uname=linux
Using alpha-unknown-linux-gnu-ar
Using alpha-unknown-linux-gnu-ranlib
Using alpha-unknown-linux-gnu-nm
Checking for alpha-unknown-linux-gnu-gcc...
Checking for shared library support...
No shared library support; try without defining CC and CFLAGS
Building static library libz.a version 1.2.7 with cc.
Checking for off64_t... No.
Checking for fseeko... No.
Checking for strerror... No.
Checking for unistd.h... No.
Checking for stdarg.h... No.
Checking whether to use vs[n]printf() or s[n]printf()... using s[n]printf().
Checking for snprintf() in stdio.h... No.
WARNING: snprintf() not found, falling back to sprintf(). zlib
can build but will be open to possible buffer-overflow security
vulnerabilities.
Checking for return value of sprintf()... No.
WARNING: apparently sprintf() does not return a value. zlib
can build but will be open to possible string-format security
vulnerabilities.
Looking for a four-byte integer type... Not found.
cc -mieee -pipe -O2 -mcpu=ev4 -DNO_FSEEKO -DNO_STRERROR -DNO_snprintf -DHAS_sprintf_void -I. -c -o example.o test/example.c
cc -mieee -pipe -O2 -mcpu=ev4 -DNO_FSEEKO -DNO_STRERROR -DNO_snprintf -DHAS_sprintf_void -c -o adler32.o adler32.c
cc -mieee -pipe -O2 -mcpu=ev4 -DNO_FSEEKO -DNO_STRERROR -DNO_snprintf -DHAS_sprintf_void -c -o crc32.o crc32.c
cc -mieee -pipe -O2 -mcpu=ev4 -DNO_FSEEKO -DNO_STRERROR -DNO_snprintf -DHAS_sprintf_void -c -o deflate.o deflate.c
/usr/libexec/gcc/alpha-unknown-linux-gnu/4.5.4/cc1: error while loading shared libraries: libmpc.so.2: cannot open shared object file: No such file or directory
/usr/libexec/gcc/alpha-unknown-linux-gnu/4.5.4/cc1: error while loading shared libraries: libmpc.so.2: cannot open shared object file: No such file or directory
/usr/libexec/gcc/alpha-unknown-linux-gnu/4.5.4/cc1: error while loading shared libraries: libmpc.so.2: cannot open shared object file: No such file or directory
make: *** [example.o] Error 1/usr/libexec/gcc/alpha-unknown-linux-gnu/4.5.4/cc1: error while loading shared libraries: libmpc.so.2: cannot open shared object file: No such file or directory
make: *** Waiting for unfinished jobs....
make: *** [adler32.o] Error 1
make: *** [crc32.o] Error 1
make: *** [deflate.o] Error 1
emake failed
* ERROR: sys-libs/zlib-1.2.7 failed (compile phase):
* (no error message)
*
* Call stack:
* ebuild.sh, line 93: Called src_compile
* environment, line 1506: Called die
* The specific snippet of code:
* emake || die
*
* If you need support, post the output of `emerge --info '=sys-libs/zlib-1.2.7'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/zlib-1.2.7'`.
* The complete build log is located at '/var/tmp/portage/sys-libs/zlib-1.2.7/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/zlib-1.2.7/temp/environment'.
* Working directory: '/var/tmp/portage/sys-libs/zlib-1.2.7/work/zlib-1.2.7'
* S: '/var/tmp/portage/sys-libs/zlib-1.2.7/work/zlib-1.2.7'
* Messages for package sys-libs/zlib-1.2.7:
* ERROR: sys-libs/zlib-1.2.7 failed (compile phase):
* (no error message)
*
* Call stack:
* ebuild.sh, line 93: Called src_compile
* environment, line 1506: Called die
* The specific snippet of code:
* emake || die
*
* If you need support, post the output of `emerge --info '=sys-libs/zlib-1.2.7'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/zlib-1.2.7'`.
* The complete build log is located at '/var/tmp/portage/sys-libs/zlib-1.2.7/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/zlib-1.2.7/temp/environment'.
* Working directory: '/var/tmp/portage/sys-libs/zlib-1.2.7/work/zlib-1.2.7'
* S: '/var/tmp/portage/sys-libs/zlib-1.2.7/work/zlib-1.2.7'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1230, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 214, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1290, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1235, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage2
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/stage2-alpha-20130223/.catalyst_lock'
Full build log at /tmp/catalyst-auto.8263/log/stage2.log
^ permalink raw reply [flat|nested] 8+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst fatal build error - stage2.spec
@ 2013-03-02 6:22 armin76
0 siblings, 0 replies; 8+ messages in thread
From: armin76 @ 2013-03-02 6:22 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Setting snapshot_cache to config file value "/space/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/space/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage2
Building natively for alpha
Source path set to /space/catalyst/tmp/default/stage1-alpha-20130302/tmp/stage1root/
If this is not desired, remove this directory or turn of seedcache in the options of catalyst.conf
the source path will then be /space/catalyst/builds/default/stage1-alpha-20130302.tar.bz2
Caching snapshot to /space/catalyst/snapshot_cache/20130302/
The autoresume path is /space/catalyst/tmp/default/.autoresume-stage2-alpha-20130302/
Location of the package cache is /space/catalyst/packages/default/stage2-alpha-20130302/
Location of the kerncache is /space/catalyst/kerncache/default/stage2-alpha-20130302/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-stage2-alpha-20130302/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-stage2-alpha-20130302/
clearing chroot ...
Emptying directory /space/catalyst/tmp/default/stage2-alpha-20130302/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage1-alpha-20130302/tmp/stage1root/
to /space/catalyst/tmp/default/stage2-alpha-20130302/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
Copying stage2-chroot.sh to ./tmp
copying stage2-chroot.sh to /space/catalyst/tmp/default/stage2-alpha-20130302/./tmp
copying chroot-functions.sh to /space/catalyst/tmp/default/stage2-alpha-20130302/./tmp
Ensure the file has the executable bit set
Running stage2-chroot.sh in chroot /space/catalyst/tmp/default/stage2-alpha-20130302/
>>> Regenerating /etc/ld.so.cache...
Gentoo Linux; http://www.gentoo.org/
Copyright 1999-2012 Gentoo Foundation; Distributed under the GPLv2
-------------------------------------------------------------------------------
[[ (0/3) Locating packages ]]
* Using baselayout : >=sys-apps/baselayout-2
* Using portage : portage
* Using os-headers : >=sys-kernel/linux-headers-3.6
* Using binutils : sys-devel/binutils
* Using gcc : sys-devel/gcc
* Using gettext : gettext
* Using libc : virtual/libc
* Using texinfo : sys-apps/texinfo
* Using zlib : zlib
* Using ncurses : ncurses
-------------------------------------------------------------------------------
[[ (1/3) Configuring environment ]]
-------------------------------------------------------------------------------
[[ (2/3) Updating portage ]]
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.1.11.50
>>> Installing (1 of 1) sys-apps/portage-2.1.11.50
-------------------------------------------------------------------------------
[[ (3/3) Emerging packages ]]
>>> Verifying ebuild manifests
>>> Starting parallel fetch
>>> Emerging (1 of 10) sys-libs/zlib-1.2.7
>>> Failed to emerge sys-libs/zlib-1.2.7, Log file:
>>> '/var/tmp/portage/sys-libs/zlib-1.2.7/temp/build.log'
* Package: sys-libs/zlib-1.2.7
* Repository: gentoo
* USE: alpha bootstrap elibc_glibc kernel_linux userland_GNU
* FEATURES: sandbox
./configure --shared --prefix=/usr --libdir=/usr/lib --uname=linux
Using alpha-unknown-linux-gnu-ar
Using alpha-unknown-linux-gnu-ranlib
Using alpha-unknown-linux-gnu-nm
Checking for alpha-unknown-linux-gnu-gcc...
Checking for shared library support...
No shared library support; try without defining CC and CFLAGS
Building static library libz.a version 1.2.7 with cc.
Checking for off64_t... No.
Checking for fseeko... No.
Checking for strerror... No.
Checking for unistd.h... No.
Checking for stdarg.h... No.
Checking whether to use vs[n]printf() or s[n]printf()... using s[n]printf().
Checking for snprintf() in stdio.h... No.
WARNING: snprintf() not found, falling back to sprintf(). zlib
can build but will be open to possible buffer-overflow security
vulnerabilities.
Checking for return value of sprintf()... No.
WARNING: apparently sprintf() does not return a value. zlib
can build but will be open to possible string-format security
vulnerabilities.
Looking for a four-byte integer type... Not found.
cc -mieee -pipe -O2 -mcpu=ev4 -DNO_FSEEKO -DNO_STRERROR -DNO_snprintf -DHAS_sprintf_void -I. -c -o example.o test/example.c
cc -mieee -pipe -O2 -mcpu=ev4 -DNO_FSEEKO -DNO_STRERROR -DNO_snprintf -DHAS_sprintf_void -c -o adler32.o adler32.c
cc -mieee -pipe -O2 -mcpu=ev4 -DNO_FSEEKO -DNO_STRERROR -DNO_snprintf -DHAS_sprintf_void -c -o crc32.o crc32.c
cc -mieee -pipe -O2 -mcpu=ev4 -DNO_FSEEKO -DNO_STRERROR -DNO_snprintf -DHAS_sprintf_void -c -o deflate.o deflate.c
/usr/libexec/gcc/alpha-unknown-linux-gnu/4.5.4/cc1: error while loading shared libraries: libmpc.so.2: cannot open shared object file: No such file or directory
/usr/libexec/gcc/alpha-unknown-linux-gnu/4.5.4/cc1: error while loading shared libraries: libmpc.so.2: cannot open shared object file: No such file or directory
/usr/libexec/gcc/alpha-unknown-linux-gnu/4.5.4/cc1: error while loading shared libraries: libmpc.so.2: cannot open shared object file: No such file or directory
/usr/libexec/gcc/alpha-unknown-linux-gnu/4.5.4/cc1: error while loading shared libraries: libmpc.so.2: cannot open shared object file: No such file or directory
make: *** [example.o] Error 1
make: *** Waiting for unfinished jobs....
make: *** [crc32.o] Error 1
make: *** [adler32.o] Error 1
make: *** [deflate.o] Error 1
emake failed
* ERROR: sys-libs/zlib-1.2.7 failed (compile phase):
* (no error message)
*
* Call stack:
* ebuild.sh, line 93: Called src_compile
* environment, line 1506: Called die
* The specific snippet of code:
* emake || die
*
* If you need support, post the output of `emerge --info '=sys-libs/zlib-1.2.7'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/zlib-1.2.7'`.
* The complete build log is located at '/var/tmp/portage/sys-libs/zlib-1.2.7/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/zlib-1.2.7/temp/environment'.
* Working directory: '/var/tmp/portage/sys-libs/zlib-1.2.7/work/zlib-1.2.7'
* S: '/var/tmp/portage/sys-libs/zlib-1.2.7/work/zlib-1.2.7'
* Messages for package sys-libs/zlib-1.2.7:
* ERROR: sys-libs/zlib-1.2.7 failed (compile phase):
* (no error message)
*
* Call stack:
* ebuild.sh, line 93: Called src_compile
* environment, line 1506: Called die
* The specific snippet of code:
* emake || die
*
* If you need support, post the output of `emerge --info '=sys-libs/zlib-1.2.7'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/zlib-1.2.7'`.
* The complete build log is located at '/var/tmp/portage/sys-libs/zlib-1.2.7/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/zlib-1.2.7/temp/environment'.
* Working directory: '/var/tmp/portage/sys-libs/zlib-1.2.7/work/zlib-1.2.7'
* S: '/var/tmp/portage/sys-libs/zlib-1.2.7/work/zlib-1.2.7'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1230, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 214, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1290, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1235, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage2
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/stage2-alpha-20130302/.catalyst_lock'
Full build log at /tmp/catalyst-auto.26398/log/stage2.log
^ permalink raw reply [flat|nested] 8+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst fatal build error - stage2.spec
@ 2014-01-25 12:55 armin76
0 siblings, 0 replies; 8+ messages in thread
From: armin76 @ 2014-01-25 12:55 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.15
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/space/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/space/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage2
Building natively for alpha
Source path set to /space/catalyst/tmp/default/stage1-alpha-20140125/tmp/stage1root/
If this is not desired, remove this directory or turn of seedcache in the options of catalyst.conf
the source path will then be /space/catalyst/builds/default/stage1-alpha-20140125.tar.bz2
Caching snapshot to /space/catalyst/snapshot_cache/20140125/
The autoresume path is /space/catalyst/tmp/default/.autoresume-stage2-alpha-20140125/
Location of the package cache is /space/catalyst/packages/default/stage2-alpha-20140125/
Location of the kerncache is /space/catalyst/kerncache/default/stage2-alpha-20140125/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-stage2-alpha-20140125/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /space/catalyst/tmp/default/.autoresume-stage2-alpha-20140125/
clearing chroot ...
Emptying directory /space/catalyst/tmp/default/stage2-alpha-20140125/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /space/catalyst/tmp/default/stage1-alpha-20140125/tmp/stage1root/
to /space/catalyst/tmp/default/stage2-alpha-20140125/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
Copying stage2-chroot.sh to ./tmp
copying stage2-chroot.sh to /space/catalyst/tmp/default/stage2-alpha-20140125/./tmp
copying chroot-functions.sh to /space/catalyst/tmp/default/stage2-alpha-20140125/./tmp
Ensure the file has the executable bit set
Running stage2-chroot.sh in chroot /space/catalyst/tmp/default/stage2-alpha-20140125/
>>> Regenerating /etc/ld.so.cache...
Gentoo Linux; http://www.gentoo.org/
Copyright 1999-2013 Gentoo Foundation; Distributed under the GPLv2
-------------------------------------------------------------------------------
[[ (0/3) Locating packages ]]
* Using baselayout : >=sys-apps/baselayout-2
* Using portage : portage
* Using os-headers : >=sys-kernel/linux-headers-3.9
* Using binutils : sys-devel/binutils
* Using gcc : sys-devel/gcc
* Using gettext : gettext
* Using libc : virtual/libc
* Using texinfo : sys-apps/texinfo
* Using zlib : zlib
* Using ncurses : ncurses
-------------------------------------------------------------------------------
[[ (1/3) Configuring environment ]]
-------------------------------------------------------------------------------
[[ (2/3) Updating portage ]]
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.2.7
>>> Installing (1 of 1) sys-apps/portage-2.2.7
-------------------------------------------------------------------------------
[[ (3/3) Emerging packages ]]
>>> Verifying ebuild manifests
>>> Emerging (1 of 9) sys-apps/baselayout-2.2
>>> Installing (1 of 9) sys-apps/baselayout-2.2
>>> Emerging (2 of 9) sys-libs/zlib-1.2.8-r1
>>> Installing (2 of 9) sys-libs/zlib-1.2.8-r1
>>> Emerging (3 of 9) virtual/libc-0
>>> Installing (3 of 9) virtual/libc-0
>>> Emerging (4 of 9) virtual/yacc-0
>>> Installing (4 of 9) virtual/yacc-0
>>> Emerging (5 of 9) sys-devel/gettext-0.18.2
>>> Installing (5 of 9) sys-devel/gettext-0.18.2
>>> Emerging (6 of 9) sys-devel/binutils-2.23.2
>>> Installing (6 of 9) sys-devel/binutils-2.23.2
>>> Emerging (7 of 9) sys-apps/texinfo-4.13-r2
>>> Installing (7 of 9) sys-apps/texinfo-4.13-r2
>>> Emerging (8 of 9) sys-devel/gcc-4.7.3-r1
>>> Installing (8 of 9) sys-devel/gcc-4.7.3-r1
>>> Emerging (9 of 9) sys-kernel/linux-headers-3.9
>>> Installing (9 of 9) sys-kernel/linux-headers-3.9
* Messages for package sys-apps/baselayout-2.2:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package sys-devel/gcc-4.7.3-r1:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* http://www.gentoo.org/doc/en/gcc-upgrading.xml
-------------------------------------------------------------------------------
removing /space/catalyst/tmp/default/stage2-alpha-20140125/./tmp/stage2-chroot.sh from the chroot
removing /space/catalyst/tmp/default/stage2-alpha-20140125/./tmp/chroot-functions.sh from the chroot
--- Running action sequence: preclean
Copying stage2-preclean-chroot.sh to ./tmp
copying stage2-preclean-chroot.sh to /space/catalyst/tmp/default/stage2-alpha-20140125/./tmp
copying chroot-functions.sh to /space/catalyst/tmp/default/stage2-alpha-20140125/./tmp
Ensure the file has the executable bit set
Running stage2-preclean-chroot.sh in chroot /space/catalyst/tmp/default/stage2-alpha-20140125/
>>> Regenerating /etc/ld.so.cache...
Skipping depclean operation for stage2
removing /space/catalyst/tmp/default/stage2-alpha-20140125/./tmp/stage2-preclean-chroot.sh from the chroot
removing /space/catalyst/tmp/default/stage2-alpha-20140125/./tmp/chroot-functions.sh from the chroot
--- Running action sequence: unbind
--- Running action sequence: clean
Cleaning chroot: /etc/resolv.conf...
Cleaning chroot: /var/tmp/*...
Cleaning chroot: /tmp/*...
rm: cannot remove '/space/catalyst/tmp/default/stage2-alpha-20140125//tmp/kerncache': Device or resource busy
!!! catalyst: Couldn't clean /tmp/*
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1295, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1110, in clean
x,env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target stage2
Catalyst aborting....
lockfile does not exist '/space/catalyst/tmp/default/stage2-alpha-20140125/.catalyst_lock'
Full build log at /tmp/catalyst-auto.30920/log/stage2.log
^ permalink raw reply [flat|nested] 8+ messages in thread
* [gentoo-releng-autobuilds] [alpha-auto] Catalyst fatal build error - stage2.spec
@ 2016-03-23 14:41 armin76
0 siblings, 0 replies; 8+ messages in thread
From: armin76 @ 2016-03-23 14:41 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
23 Mar 2016 15:41:08 CET: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
23 Mar 2016 15:41:08 CET: NOTICE : Using target: stage2
23 Mar 2016 15:41:08 CET: NOTICE : Source file specification matching setting is: strict
23 Mar 2016 15:41:08 CET: NOTICE : Accepted source file extensions search order: ['tar.xz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
23 Mar 2016 15:41:09 CET: NOTICE : Source path set to /space/catalyst/tmp/default/stage1-alpha-20160323/
23 Mar 2016 15:41:09 CET: NOTICE : Removing AutoResume Points ...
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
23 Mar 2016 15:41:19 CET: NOTICE : purge(); clearing autoresume ...
23 Mar 2016 15:41:19 CET: NOTICE : Removing AutoResume Points ...
23 Mar 2016 15:41:19 CET: NOTICE : purge(); clearing chroot ...
23 Mar 2016 15:41:19 CET: NOTICE : Clearing the chroot path ...
23 Mar 2016 15:41:19 CET: NOTICE : purge(); clearing package cache ...
23 Mar 2016 15:41:19 CET: NOTICE : purging the pkgcache ...
23 Mar 2016 15:41:19 CET: NOTICE : purge(); clearing kerncache ...
23 Mar 2016 15:41:19 CET: NOTICE : purging the kerncache ...
23 Mar 2016 15:41:19 CET: NOTICE : --- Running action sequence: unpack
23 Mar 2016 15:41:19 CET: ERROR : Exception running action sequence unpack
Traceback (most recent call last):
File "/usr/lib/python2.7/site-packages/catalyst/base/stagebase.py", line 1413, in run
getattr(self, x)()
File "/usr/lib/python2.7/site-packages/catalyst/base/stagebase.py", line 734, in unpack
unpack_info['source'] = file_check(unpack_info['source'])
File "/usr/lib/python2.7/site-packages/catalyst/support.py", line 76, in file_check
for ext in extensions:
TypeError: 'NoneType' object is not iterable
23 Mar 2016 15:41:19 CET: NOTICE : Cleaning up... Running unbind()
Full build log at /tmp/catalyst-auto.VGFE5Q/log/stage2.log
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2016-03-23 14:52 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-10-29 5:33 [gentoo-releng-autobuilds] [alpha-auto] Catalyst fatal build error - stage2.spec armin76
-- strict thread matches above, loose matches on Subject: below --
2016-03-23 14:41 armin76
2014-01-25 12:55 armin76
2013-03-02 6:22 armin76
2013-02-23 8:36 armin76
2011-10-22 5:14 armin76
2011-10-15 5:18 armin76
2011-04-16 4:47 armin76
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox