* [gentoo-releng-autobuilds] [x86-auto] Catalyst non-fatal build error - installcd-stage1.spec
@ 2014-08-27 5:36 99% catalyst
0 siblings, 0 replies; 1+ results
From: catalyst @ 2014-08-27 5:36 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*
* If hddtemp complains but finds your HDD temperature sensor, use the
* --quiet option to suppress the warning.
*
* (Note: Above message is only printed the first time package is
* installed. Please look at /usr/share/doc/hddtemp-0.3_beta15-r7/README.gentoo*
* for future reference)
* Messages for package sys-power/acpid-2.0.20:
*
* You may wish to read the Gentoo Linux Power Management Guide,
* which can be found online at:
* http://www.gentoo.org/doc/en/power-management-guide.xml
*
* Messages for package net-misc/ntp-4.2.6_p5-r10:
* You can find an example /etc/ntp.conf in /usr/share/ntp/
* Review /etc/ntp.conf to setup server info.
* Review /etc/conf.d/ntpd to setup init.d info.
* The way ntp sets and maintains your system time has changed.
* Now you can use /etc/init.d/ntp-client to set your time at
* boot while you can use /etc/init.d/ntpd to maintain your time
* while your machine runs
* Messages for package dev-python/setuptools-2.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/m2crypto-0.21.1-r2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package net-misc/dhcpcd-6.4.3:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package net-wireless/wpa_supplicant-2.0-r2:
* If this is a clean installation of wpa_supplicant, you
* have to create a configuration file named
* /etc/wpa_supplicant/wpa_supplicant.conf
*
* An example configuration file is available for reference in
* /usr/share/doc/wpa_supplicant-2.0-r2/
* Messages for package sys-apps/util-linux-2.24.1-r3:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/mdadm-3.3.1-r2:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package sys-libs/libkudzu-1.2.57.1:
* QA: Kernel version could not be determined, please inherit kernel-2 or linux-info
* Messages for package sys-apps/hwsetup-1.2-r2:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* This package is intended for usage on the Gentoo release media. If
* you are not building a CD, remove this package. It will not work
* properly on a running system, as Gentoo does not use any of the
* Knoppix-style detection except for CD builds.
* Messages for package sys-fs/udev-215-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* CONFIG_FHANDLE: is not set when it should be.
* Please check to make sure these options are set correctly.
* Failure to do so may cause unexpected problems.
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-fs/lvm2-2.02.109:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Make sure the "lvm" init script is in the runlevels:
* # rc-update add lvm boot
*
* Make sure to enable lvmetad in /etc/lvm/lvm.conf if you want
* to enable lvm autoactivation and metadata caching.
* Messages for package app-portage/mirrorselect-2.2.0.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-fs/ntfs3g-2013.1.13:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package app-misc/livecd-tools-2.0.4:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* Messages for package app-crypt/gnupg-2.0.25:
* If you wish to view images emerge:
* media-gfx/xloadimage, media-gfx/xli or any other viewer
* Remember to use photo-viewer option in configuration file to activate
* the right viewer.
*
* Please remember to restart gpg-agent if a different version
* of the agent is currently used. If you are unsure of the gpg
* agent you are using please run 'killall gpg-agent',
* and to start a fresh daemon just run 'gpg-agent --daemon'.
* Messages for package sys-fs/cryptsetup-1.6.2:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: sys-fs/cryptsetup-1.6.2::gentoo failed (install phase):
* !!! newconfd: /usr/portage/sys-fs/cryptsetup/files/1.0.6-dmcrypt.confd does not exist
*
* If you need support, post the output of `emerge --info '=sys-fs/cryptsetup-1.6.2::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/cryptsetup-1.6.2::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/cryptsetup-1.6.2/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/cryptsetup-1.6.2/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/cryptsetup-1.6.2/work/cryptsetup-1.6.2'
* S: '/var/tmp/portage/sys-fs/cryptsetup-1.6.2/work/cryptsetup-1.6.2'
!!! existing preserved libs found
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/default/livecd-stage1-x86-20140827/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.4996/log/installcd-stage1.log
^ permalink raw reply [relevance 99%]
Results 1-1 of 1 | reverse | options above
-- pct% links below jump to the message on this page, permalinks otherwise --
2014-08-27 5:36 99% [gentoo-releng-autobuilds] [x86-auto] Catalyst non-fatal build error - installcd-stage1.spec catalyst
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox