[gentoo-releng-autobuilds] [amd64-auto] Catalyst non-fatal build error - livegui/livegui-stage1.spec

[catalyst@milou.amd64.dev.gentoo.org]

 * If you receive an error, "unable to anonymously mmap...
 * Resource temporarily unavailable" when running growisofs,
 * then you may need to run "ulimit -l unlimited".
 * Messages for package media-fonts/noto-20240430:
 * Log file: /var/log/portage/media-fonts:noto-20240430:20240616-184540.log
 * The following fontconfig configuration files have been installed:
 * 
 *   66-noto-serif.conf
 *   66-noto-mono.conf
 *   66-noto-sans.conf
 * 
 * Use `eselect fontconfig` to enable/disable them.
 * Messages for package dev-libs/geoip-1.6.12-r1:
 * Log file: /var/log/portage/dev-libs:geoip-1.6.12-r1:20240616-184603.log
 * WARNING: Databases are no longer installed by this ebuild.
 * Don't forget to run 'geoipupdate.sh -f' (or geoipupdate from
 * net-misc/geoipupdate) to populate /usr/share/GeoIP/
 * with geo-located IP address databases.
 * Messages for package app-alternatives/cpio-0:
 * Log file: /var/log/portage/app-alternatives:cpio-0:20240616-184645.log
 * This package will overwrite one or more files that may belong to other
 * packages (see list below).
 * 
 * Detected file collision(s):
 * 
 * 	/bin/cpio
 * 
 * Searching all installed packages for file collisions...
 * 
 * Press Ctrl-C to Stop
 * 
 * None of the installed packages claim the file(s).
 * 
 * Package 'app-alternatives/cpio-0' merged despite file collisions. If
 * necessary, refer to your elog messages for the whole content of the
 * above message.
 * Messages for package app-emacs/emacs-common-1.10:
 * Log file: /var/log/portage/app-emacs:emacs-common-1.10:20240616-184656.log
 * All site initialisation for Gentoo-installed packages is added to
 * /usr/share/emacs/site-lisp/site-gentoo.el. In order for this site
 * initialisation to be loaded for all users automatically, a default
 * site startup file /etc/emacs/site-start.el is installed. You are
 * responsible for maintenance of this file.
 * 
 * Alternatively, individual users can add the following command:
 * 
 * (require 'site-gentoo)
 * 
 * to their ~/.emacs initialisation files, or, for greater flexibility,
 * users may load single package-specific initialisation files from the
 * /usr/share/emacs/site-lisp/site-gentoo.d/ directory.
 * 
 * (Note: Above message is only printed the first time package is
 * installed. Please look at /usr/share/doc/emacs-common-1.10/README.gentoo*
 * for future reference)
 * Messages for package app-text/wgetpaste-2.34:
 * Log file: /var/log/portage/app-text:wgetpaste-2.34:20240616-184711.log
 * Install additional packages for optional runtime features:
 *   app-text/ansifilter for ANSI (color code) stripping support
 *   x11-misc/xclip for xclip support
 * Messages for package sys-kernel/linux-firmware-20240610:
 * Log file: /var/log/portage/sys-kernel:linux-firmware-20240610:20240616-184651.log
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Your configuration for sys-kernel/linux-firmware-20240610 has been saved in 
 * "/etc/portage/savedconfig/sys-kernel/linux-firmware-20240610" for your editing pleasure.
 * You can edit these files by hand and remerge this package with
 * USE=savedconfig to customise the configuration.
 * You can rename this file/directory to one of the following for
 * its configuration to apply to multiple versions:
 * ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
 * [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
 * If you are only interested in particular firmware files, edit the saved
 * configfile and remove those that you do not want.
 * Messages for package app-eselect/eselect-wxwidgets-20230114-r1:
 * Log file: /var/log/portage/app-eselect:eselect-wxwidgets-20230114-r1:20240616-184856.log
 * This eselect module only controls the version of wxGTK used when
 * building packages outside of portage.  If you are not doing development
 * with wxWidgets or bakefile you will never need to use it.
 * Messages for package dev-lang/lua-5.4.6:
 * Log file: /var/log/portage/dev-lang:lua-5.4.6:20240616-185155.log
 * Install additional packages for optional runtime features:
 *   app-emacs/lua-mode for Lua support for Emacs
 * Messages for package sys-apps/lm-sensors-3.6.0-r1:
 * Log file: /var/log/portage/sys-apps:lm-sensors-3.6.0-r1:20240616-185418.log
 * 
 * Please run `/usr/sbin/sensors-detect' in order to setup
 * "/etc/modules-load.d/lm_sensors.conf".
 * 
 * You might want to add lm_sensors to your default runlevel to make
 * sure the sensors get initialized on the next startup.
 * 
 * Be warned, the probing of hardware in your system performed by
 * sensors-detect could freeze your system.
 * Messages for package dev-libs/cyrus-sasl-2.1.28-r4:
 * Log file: /var/log/portage/dev-libs:cyrus-sasl-2.1.28-r4:20240616-185838.log
 * pwcheck and saslauthd home directories have moved to:
 *   /run/saslauthd, using tmpfiles.d
 * Messages for package dev-python/ssl-fetch-0.4-r1:
 * Log file: /var/log/portage/dev-python:ssl-fetch-0.4-r1:20240616-185930.log
 * This is beta software.
 * The APIs it installs should be considered unstable
 * and are subject to change in these early versions.
 * 
 * Please file any enhancement requests, or bugs
 * at https://github.com/dol-sen/ssl-fetch/issues
 * Messages for package net-misc/openssh-9.6_p1-r3:
 * Log file: /var/log/portage/net-misc:openssh-9.6_p1-r3:20240616-185951.log
 * Install additional packages for optional runtime features:
 *   x11-apps/xauth for x11 forwarding
 * Messages for package dev-libs/libinput-1.25.0:
 * Log file: /var/log/portage/dev-libs:libinput-1.25.0:20240616-190048.log
 * Install additional packages for optional runtime features:
 *   dev-python/libevdev for measure and replay tools
 * Messages for package media-libs/libva-2.21.0:
 * Log file: /var/log/portage/media-libs:libva-2.21.0:20240616-190100.log
 * Install additional packages for optional runtime features:
 *   media-libs/libva-intel-driver for Older Intel GPU support up to Gen8
 *   media-libs/libva-intel-media-driver for Newer Intel GPU support from Gen9+
 * Messages for package dev-db/mysql-init-scripts-2.3-r8:
 * Log file: /var/log/portage/dev-db:mysql-init-scripts-2.3-r8:20240616-190104.log
 * To use the mysql-s6 script, you need to install the optional sys-apps/s6 package.
 * If you wish to use s6 logging support, comment out the log-error setting in your my.cnf
 * 
 * Starting with version 10.1.8, MariaDB includes an improved systemd unit named mariadb.service
 * You should prefer that unit over this package's mysqld.service.
 * Messages for package sys-apps/inxi-3.3.33.1:
 * Log file: /var/log/portage/sys-apps:inxi-3.3.33.1:20240616-190109.log
 * Optional features as suggested by inxi --recommends:
 *   net-wireless/bluez-tools for bt-adapter: -E bluetooth data (if no hciconfig, btmgmt)
 *   net-wireless/bluez for btmgmt: -E bluetooth data (if no hciconfig)
 *   net-dns/bind-tools for dig: -i wlan IP
 *   app-admin/doas for doas: -Dx hddtemp-user; -o file-user (alt for sudo)
 *   net-wireless/bluez for hciconfig: -E bluetooth data (deprecated, good report)
 *   sys-libs/freeipmi for ipmi-sensors: -s IPMI sensors (servers)
 *   sys-apps/usbutils for lsusb: -A usb audio; -J (optional); -N usb networking
 *   sys-fs/lvm2 for lvs: -L LVM data
 *   sys-fs/mdadm for mdadm: -Ra advanced mdraid data
 *   sys-apps/smartmontools for smartctl: -Da advanced data
 *   app-admin/sudo for sudo: -Dx hddtemp-user; -o file-user (try doas!)
 *   sys-apps/systemd for udevadm: -m ram data for non-root, or no dmidecode
 *   sys-power/upower for upower: -sx attached device battery info
 *   x11-apps/mesa-progs for eglinfo: -G X11/Wayland EGL info
 *   x11-apps/mesa-progs for glxinfo: -G X11 GLX info
 *   dev-util/vulkan-tools for vulkaninfo: -G Vulkan API info
 *   app-misc/wayland-utils for wayland-info: -G Wayland data (not for X)
 *   x11-misc/wmctrl for wmctrl: -S active window manager (fallback)
 *   x11-apps/xdpyinfo for xdpyinfo: -G (X) Screen resolution, dpi; -Ga Screen size
 *   x11-apps/xdriinfo for xdriinfo: -G (X) DRI driver (if missing, fallback to Xorg log)
 *   x11-apps/xrandr for xrandr: -G (X) monitors(s) resolution; -Ga monitor data
 * Messages for package dev-db/mariadb-10.6.17:
 * Log file: /var/log/portage/dev-db:mariadb-10.6.17:20240616-190117.log
 * This install includes the PAM authentication plugin.
 * To activate and configure the PAM plugin, please read:
 * https://mariadb.com/kb/en/mariadb/pam-authentication-plugin/
 * You might want to run:
 * "emerge --config =dev-db/mariadb-10.6.17"
 * if this is a new install.
 * 
 * If you are switching server implentations, you should run the
 * mysql_upgrade tool.
 * This version of mariadb reorganizes the configuration from a single my.cnf
 * to several files in /etc/mysql/mariadb.d.
 * Please backup any changes you made to /etc/mysql/my.cnf
 * and add them as a new file under /etc/mysql/mariadb.d with a .cnf extension.
 * You may have as many files as needed and they are read alphabetically.
 * Be sure the options have the appropriate section headers, i.e. [mysqld].
 * Messages for package sys-kernel/dracut-060_pre20240104-r4:
 * Log file: /var/log/portage/sys-kernel:dracut-060_pre20240104-r4:20240616-190132.log
 * Install additional packages for optional runtime features:
 *   net-misc/networkmanager for Networking support
 *   sys-fs/btrfs-progs for Scan for Btrfs on block devices
 *   net-fs/cifs-utils for Support CIFS
 *   sys-fs/cryptsetup[-static-libs] for Decrypt devices encrypted with cryptsetup/LUKS
 *   app-shells/dash for Allows use of dash instead of default bash (on your own risk)
 *   sys-block/open-iscsi for Support iSCSI
 *   sys-fs/lvm2[lvm] for Support Logical Volume Manager
 *   sys-fs/mdadm for Support MD devices, also known as software RAID devices
 *   sys-fs/dmraid for Support MD devices, also known as software RAID devices
 *   sys-fs/multipath-tools for Support Device Mapper multipathing
 *   >=sys-boot/plymouth-0.8.5-r5 for Plymouth boot splash
 *   sys-block/nbd for Support network block devices
 *   app-admin/rsyslog for Enable logging with rsyslog
 *   app-crypt/tpm2-tools for Support TPM 2.0 TSS
 *   net-wireless/bluez for Support Bluetooth (experimental)
 *   sys-apps/biosdevname for Support BIOS-given device names
 *   sys-apps/nvme-cli for Support network NVMe
 *   app-misc/jq for Support network NVMe
 *   sys-apps/rng-tools for Enable rngd service to help generating entropy early during boot
 *   sys-kernel/installkernel[dracut] for automatically generating an initramfs on each kernel installation
 * Messages for package app-misc/screen-4.9.1-r1:
 * Log file: /var/log/portage/app-misc:screen-4.9.1-r1:20240616-190136.log
 * Some dangerous key bindings have been removed or changed to more safe values.
 * We enable some xterm hacks in our default screenrc, which might break some
 * applications. Please check /etc/screenrc for information on these changes.
 * This revision changes the screen socket location to /tmp/screen
 * Messages for package dev-qt/qtcore-5.15.14:
 * Log file: /var/log/portage/dev-qt:qtcore-5.15.14:20240616-190229.log
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Generated gentoo-qconfig.h is empty
 * Messages for package dev-vcs/git-2.44.2:
 * Log file: /var/log/portage/dev-vcs:git-2.44.2:20240616-190729.log
 * Please read /usr/share/bash-completion/completions/git for Git bash command
 * completion.
 * Please read /usr/share/git/git-prompt.sh for Git bash prompt
 * Note that the prompt bash code is now in that separate script
 * Some scripts require additional dependencies:
 *   dev-util/quilt for git-quiltimport
 *   www-servers/lighttpd for git-instaweb
 *   www-servers/apache for git-instaweb
 *   www-servers/nginx for git-instaweb
 * Messages for package sys-boot/grub-2.12-r4:
 * Log file: /var/log/portage/sys-boot:grub-2.12-r4:20240616-190922.log
 * For information on how to configure GRUB2 please refer to the guide:
 *     https://wiki.gentoo.org/wiki/GRUB2_Quick_Start
 * 
 * Install additional packages for optional runtime features:
 *   sys-boot/os-prober for detecting other operating systems (grub-mkconfig)
 *   dev-libs/libisoburn for creating rescue media (grub-mkrescue)
 *   sys-fs/mdadm for enabling RAID device detection
 *   sys-kernel/installkernel[grub] for automatically updating GRUB's configuration on each kernel installation
 * Messages for package sys-devel/llvm-17.0.6:
 * Log file: /var/log/portage/sys-devel:llvm-17.0.6:20240616-190925.log
 * You can find additional opt-viewer utility scripts in:
 *   /usr/lib/llvm/17/share/opt-viewer
 * To use these scripts, you will need Python along with the following
 * packages:
 *   dev-python/pygments (for opt-viewer)
 *   dev-python/pyyaml (for all of them)
 * Messages for package sys-devel/clang-17.0.6:
 * Log file: /var/log/portage/sys-devel:clang-17.0.6:20240616-190934.log
 * You can find additional utility scripts in:
 *   /usr/lib/llvm/17/share/clang
 * Some of them are vim integration scripts (with instructions inside).
 * The run-clang-tidy.py script requires the following additional package:
 *   dev-python/pyyaml
 * Messages for package sys-fs/lvm2-2.03.22-r5:
 * Log file: /var/log/portage/sys-fs:lvm2-2.03.22-r5:20240616-192400.log
 * Make sure the "lvm" init script is in the runlevels:
 * # rc-update add lvm boot
 * 
 * Make sure to enable lvmetad in /etc/lvm/lvm.conf if you want
 * to enable lvm autoactivation and metadata caching.
 * Found the following problematic permissions:
 * 
 *     drwxrwxrwt /run
 * 
 * Expected:
 * 
 *     drwxr-xr-x /run
 * 
 * This is known to cause problems for udev-enabled LVM services.
 * Messages for package sys-fs/dmraid-1.0.0_rc16-r7:
 * Log file: /var/log/portage/sys-fs:dmraid-1.0.0_rc16-r7:20240616-192405.log
 * For booting Gentoo from Device-Mapper RAID you can use a Genkernel initramfs.
 * 
 * Genkernel will generate the kernel and the initramfs with a statically 
 * linked dmraid binary (its own version which may not be the same as this version):
 * 	 emerge -av sys-kernel/genkernel
 * 	 genkernel --dmraid all
 * 
 * A pre-patched distfile of this version of DMRAID has been installed at
 * /usr/share/dmraid/dmraid-1.0.0.rc16-3-prepatched.tar.bz2 , to support using it within a
 * Genkernel initramfs.
 * 
 * If you would rather use this version of DMRAID with Genkernel, update the following
 * in /etc/genkernel.conf:
 * 	 DMRAID_VER="1.0.0.rc16-3"
 * 	 DMRAID_SRCTAR="/usr/share/dmraid/dmraid-1.0.0.rc16-3-prepatched.tar.bz2"
 * 
 * Messages for package sys-fs/multipath-tools-0.9.8:
 * Log file: /var/log/portage/sys-fs:multipath-tools-0.9.8:20240616-192409.log
 * If you need multipath on your system, you must
 * add 'multipath' into your boot runlevel!
 * Messages for package net-libs/nodejs-20.12.1:
 * Log file: /var/log/portage/net-libs:nodejs-20.12.1:20240616-192521.log
 * remember to run: source /etc/profile if you plan to use nodejs
 * 	in your current shell
 * Messages for package app-text/asciidoc-10.2.0:
 * Log file: /var/log/portage/app-text:asciidoc-10.2.0:20240616-192527.log
 * If you are going to use a2x, please also look at a2x(1) under
 * REQUISITES for a list of runtime dependencies.
 * 
 * (Note: Above message is only printed the first time package is
 * installed. Please look at /usr/share/doc/asciidoc-10.2.0/README.gentoo*
 * for future reference)
 * Install additional packages for optional runtime features:
 *   media-sound/lilypond and virtual/imagemagick-tools for music filter support
 *   dev-util/source-highlight and dev-python/pygments and app-text/highlight for source filter support
 *   dev-texlive/texlive-latex and app-text/dvipng for latex filter support
 *   dev-texlive/texlive-latex and app-text/dvisvgm for latex filter support
 *   media-gfx/graphviz for graphviz filter support
 * Messages for package sys-apps/util-linux-2.39.3-r7:
 * Log file: /var/log/portage/sys-apps:util-linux-2.39.3-r7:20240616-193404.log
 * The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
 * Messages for package media-libs/fontconfig-2.15.0:
 * Log file: /var/log/portage/media-libs:fontconfig-2.15.0:20240616-193504.log
 * Please make fontconfig configuration changes using `eselect
 * fontconfig`. Any changes made to /etc/fonts/fonts.conf will be
 * overwritten. If you need to reset your configuration to upstream
 * defaults, delete the directory /etc/fonts/conf.d/ and re-emerge
 * fontconfig.
 * 
 * (Note: Above message is only printed the first time package is
 * installed. Please look at /usr/share/doc/fontconfig-2.15.0/README.gentoo*
 * for future reference)
 * Messages for package dev-libs/boost-1.84.0-r3:
 * Log file: /var/log/portage/dev-libs:boost-1.84.0-r3:20240616-193733.log
 * Boost.Regex is *extremely* ABI sensitive. If you get errors such as
 * 
 *   undefined reference to `boost::re_detail_108400::cpp_regex_traits_implementation
 *     <char>::transform_primary[abi:cxx11](char const*, char const*) const'
 * 
 * Then you need to recompile Boost and all its reverse dependencies
 * using the same toolchain. In general, *every* change of the C++ toolchain
 * requires a complete rebuild of the Boost-dependent ecosystem.
 * 
 * See for instance https://bugs.gentoo.org/638138
 * Messages for package x11-libs/pango-1.52.1:
 * Log file: /var/log/portage/x11-libs:pango-1.52.1:20240616-194153.log
 * media-libs/freetype is installed without harfbuzz support. This may
 * lead to minor font rendering problems, see bug 712374.
 * Messages for package x11-apps/xinit-1.4.2:
 * Log file: /var/log/portage/x11-apps:xinit-1.4.2:20240616-194439.log
 * If you use startx to start X instead of a login manager like gdm/kdm,
 * you can set the XSESSION variable to anything in /etc/X11/Sessions/ or
 * any executable. When you run startx, it will run this as the login session.
 * You can set this in a file in /etc/env.d/ for the entire system,
 * or set it per-user in ~/.bash_profile (or similar for other shells).
 * Here's an example of setting it for the whole system:
 *     echo XSESSION="Gnome" > /etc/env.d/90xsession
 *     env-update && source /etc/profile
 * Messages for package app-admin/syslog-ng-4.6.0:
 * Log file: /var/log/portage/app-admin:syslog-ng-4.6.0:20240616-194608.log
 * It is highly recommended that app-admin/logrotate be emerged to
 * manage the log files. syslog-ng installs a file in /etc/logrotate.d
 * for logrotate to use.
 * Messages for package media-sound/alsa-utils-1.2.11:
 * Log file: /var/log/portage/media-sound:alsa-utils-1.2.11:20240616-194648.log
 * 
 * To take advantage of the init script, and automate the process of
 * saving and restoring sound-card mixer levels you should
 * add alsasound to the boot runlevel. You can do this as
 * root like so:
 * # rc-update add alsasound boot
 * 
 * The ALSA core should be built into the kernel or loaded through other
 * means. There is no longer any modular auto(un)loading in alsa-utils.
 * Messages for package net-vpn/openvpn-2.6.9:
 * Log file: /var/log/portage/net-vpn:openvpn-2.6.9:20240616-194650.log
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * The tmpfiles processor exited with a non-zero exit code
 * The openvpn init script expects to find the configuration file
 * openvpn.conf in /etc/openvpn along with any extra files it may need.
 * 
 * To create more VPNs, simply create a new .conf file for it and
 * then create a symlink to the openvpn init script from a link called
 * openvpn.newconfname - like so
 * 	 cd /etc/openvpn
 * 	 nano foo.conf
 * 	 cd /etc/init.d
 * 	 ln -s openvpn openvpn.foo
 * 
 * You can then treat openvpn.foo as any other service, so you can
 * stop one vpn and start another if you need to.
 * Messages for package media-libs/mesa-24.0.9:
 * Log file: /var/log/portage/media-libs:mesa-24.0.9:20240616-194734.log
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Messages for package sys-auth/elogind-246.10-r4:
 * Log file: /var/log/portage/sys-auth:elogind-246.10-r4:20240616-194849.log
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * elogind is currently not started from any runlevel.
 * You may add it to the boot runlevel by:
 * # rc-update add elogind boot
 * 
 * Alternatively, you can leave elogind out of any
 * runlevel. It will then be started automatically
 * when the first service calls it via dbus, or
 * the first user logs into the system.
 * Messages for package sys-apps/dbus-1.15.8:
 * Log file: /var/log/portage/sys-apps:dbus-1.15.8:20240616-194903.log
 * Some applications require a session bus in addition to the system
 * bus. Please see `man dbus-launch` for more information.
 * 
 * (Note: Above message is only printed the first time package is
 * installed. Please look at /usr/share/doc/dbus-1.15.8/README.gentoo*
 * for future reference)
 * Messages for package net-print/cups-2.4.7-r2:
 * Log file: /var/log/portage/net-print:cups-2.4.7-r2:20240616-194910.log
 * Your USB printers will be managed via libusb. In case you run into problems, 
 * please try disabling USB_PRINTER support in your kernel or blacklisting the
 * usblp kernel module.
 * Alternatively, just disable the usb useflag for cups (your printer will still work).
 * Messages for package x11-libs/gtk+-3.24.41:
 * Log file: /var/log/portage/x11-libs:gtk+-3.24.41:20240616-194913.log
 * Please install app-text/evince for print preview functionality.
 * Alternatively, check "gtk-print-preview-command" documentation and
 * add it to your settings.ini file.
 * Messages for package app-editors/emacs-29.3-r2:
 * Log file: /var/log/portage/app-editors:emacs-29.3-r2:20240616-194916.log
 * You can set the version to be started by /usr/bin/emacs through the
 * Emacs eselect module, which also redirects man and info pages.
 * Therefore, several Emacs versions can be installed at the same time.
 * "man emacs.eselect" for details.
 * 
 * If you upgrade from a previous major version of Emacs, then it is
 * strongly recommended that you use app-admin/emacs-updater to rebuild
 * all byte-compiled elisp files of the installed Emacs packages.
 * 
 * You need to install some fonts for Emacs. Installing
 * media-fonts/font-adobe-{75,100}dpi on the X server's machine would
 * satisfy basic Emacs requirements under X11. See also
 * https://wiki.gentoo.org/wiki/Xft_support_for_GNU_Emacs for how to
 * enable anti-aliased fonts.
 * 
 * The mailutils USE flag is disabled. If Emacs' own e-mail features are
 * going to be used as an e-mail client (e.g. Rmail), you are strongly
 * encouraged to enable it. If not, Emacs will use its own
 * implementation of movemail; which has fewer features and is less
 * secure. For more information see:
 * https://www.gnu.org/software/emacs/manual/html_node/emacs/Movemail.htm
 * l
 * 
 * (Note: Above message is only printed the first time package is
 * installed. Please look at /usr/share/doc/emacs-29.3-r2/README.gentoo*
 * for future reference)
 * Messages for package x11-misc/xdg-user-dirs-gtk-0.11:
 * Log file: /var/log/portage/x11-misc:xdg-user-dirs-gtk-0.11:20240616-194921.log
 * This package tries to automatically use some sensible default
 * directories for your documents, music, video and other stuff. If you
 * want to change those directories to your needs, see the settings in
 * ~/.config/user-dirs.dirs
 * 
 * (Note: Above message is only printed the first time package is
 * installed. Please look at /usr/share/doc/xdg-user-dirs-gtk-0.11/README.gentoo*
 * for future reference)
 * Messages for package gui-libs/gtk-4.12.5-r1:
 * Log file: /var/log/portage/gui-libs:gtk-4.12.5-r1:20240616-195048.log
 * Please install app-text/evince for print preview functionality.
 * Alternatively, check "gtk-print-preview-command" documentation and
 * add it to your settings.ini file.
 * Messages for package net-wireless/bluez-5.76-r1:
 * Log file: /var/log/portage/net-wireless:bluez-5.76-r1:20240616-195750.log
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * To use dial up networking you must install net-dialup/ppp
 * Messages for package net-misc/modemmanager-1.20.6:
 * Log file: /var/log/portage/net-misc:modemmanager-1.20.6:20240616-200046.log
 * Install additional packages for optional runtime features:
 *   sys-apps/usb_modeswitch for the case your modem shows up as a storage drive
 * Messages for package sys-power/switcheroo-control-2.6-r2:
 * Log file: /var/log/portage/sys-power:switcheroo-control-2.6-r2:20240616-200127.log
 * You need to enable the service:
 * # rc-update add switcheroo-control default
 * Messages for package sys-power/power-profiles-daemon-0.20:
 * Log file: /var/log/portage/sys-power:power-profiles-daemon-0.20:20240616-201258.log
 * You need to enable the service:
 * # rc-update add power-profiles-daemon default
 * Messages for package dev-python/pyjwt-2.8.0:
 * Log file: /var/log/portage/dev-python:pyjwt-2.8.0:20240616-202014.log
 * Install additional packages for optional runtime features:
 *   dev-python/cryptography for cryptography
 * Messages for package mail-mta/nullmailer-2.2-r2:
 * Log file: /var/log/portage/mail-mta:nullmailer-2.2-r2:20240616-202133.log
 * To create an initial setup, please do:
 * emerge --config =mail-mta/nullmailer-2.2-r2
 * Messages for package app-admin/sudo-1.9.15_p5:
 * Log file: /var/log/portage/app-admin:sudo-1.9.15_p5:20240616-202138.log
 * To use the -A (askpass) option, you need to install a compatible
 * password program from the following list. Starred packages will
 * automatically register for the use with sudo (but will not force
 * the -A option):
 * 
 *  [*] net-misc/ssh-askpass-fullscreen
 *      net-misc/x11-ssh-askpass
 * 
 * You can override the choice by setting the SUDO_ASKPASS environmnent
 * variable to the program you want to use.
 * Messages for package kde-frameworks/solid-5.116.0:
 * Log file: /var/log/portage/kde-frameworks:solid-5.116.0:20240616-203309.log
 * Install additional packages for optional runtime features:
 *   app-misc/media-player-info for media player devices support
 * Messages for package net-libs/signond-8.61:
 * Log file: /var/log/portage/net-libs:signond-8.61:20240616-203632.log
 * Without kde-apps/signon-kwallet-extension installed, passwords
 * will be saved in plaintext!
 * Messages for package x11-misc/sddm-0.21.0:
 * Log file: /var/log/portage/x11-misc:sddm-0.21.0:20240616-203829.log
 * NOTE: If SDDM startup appears to hang then entropy pool is too low.
 * This can be fixed by configuring one of the following:
 *   - Enable CONFIG_RANDOM_TRUST_CPU in linux kernel
 *   - # emerge sys-apps/haveged && rc-update add haveged boot
 *   - # emerge sys-apps/rng-tools && rc-update add rngd boot
 * 
 * SDDM example config can be shown with:
 *   /usr/bin/sddm --example-config
 * Use /etc/sddm.conf.d/ directory to override specific options.
 * 
 * For more information on how to configure SDDM, please visit the wiki:
 *   https://wiki.gentoo.org/wiki/SDDM
 * Install additional packages for optional runtime features:
 *   dev-libs/weston for Weston DisplayServer support (EXPERIMENTAL)
 *   kde-plasma/kwin for KWin DisplayServer support (EXPERIMENTAL)
 * Messages for package net-wireless/wpa_supplicant-2.10-r4:
 * Log file: /var/log/portage/net-wireless:wpa_supplicant-2.10-r4:20240616-204528.log
 * If this is a clean installation of wpa_supplicant, you have to create
 * a configuration file named /etc/wpa_supplicant/wpa_supplicant.conf An
 * example configuration file is available for reference in
 * /usr/share/doc/wpa_supplicant-2.10-r4/
 * 
 * (Note: Above message is only printed the first time package is
 * installed. Please look at /usr/share/doc/wpa_supplicant-2.10-r4/README.gentoo*
 * for future reference)
 * Messages for package app-emacs/ebuild-mode-1.70:
 * Log file: /var/log/portage/app-emacs:ebuild-mode-1.70:20240616-204949.log
 * Install additional packages for optional runtime features:
 *   dev-util/pkgdev for additional development tools
 *   dev-util/pkgcheck for ebuild QA utilities
 *   dev-python/docutils-glep for generating HTML from GLEPs
 * Messages for package app-misc/livecd-tools-2.9:
 * Log file: /var/log/portage/app-misc:livecd-tools-2.9:20240616-204954.log
 * This package is designed for use on the LiveCD only and will do
 * unspeakably horrible and unexpected things on a normal system.
 * YOU HAVE BEEN WARNED!!!
 * Messages for package app-misc/mc-4.8.30-r2:
 * Log file: /var/log/portage/app-misc:mc-4.8.30-r2:20240616-204955.log
 * To enable exiting to latest working directory,
 * put this into your ~/.bashrc:
 * . /usr/libexec/mc/mc.sh
 * Messages for package app-emulation/cloud-init-23.4:
 * Log file: /var/log/portage/app-emulation:cloud-init-23.4:20240616-204950.log
 * cloud-init-local needs to be run in the boot runlevel because it
 * modifies services in the default runlevel.  When a runlevel is started
 * it is cached, so modifications that happen to the current runlevel
 * while you are in it are not acted upon.
 * Messages for package app-portage/gentoolkit-0.6.5:
 * Log file: /var/log/portage/app-portage:gentoolkit-0.6.5:20240616-204956.log
 * 
 * For further information on gentoolkit, please read the gentoolkit
 * guide: https://wiki.gentoo.org/wiki/Gentoolkit
 * 
 * Another alternative to equery is app-portage/portage-utils
 * 
 * Additional tools that may be of interest:
 * 
 *     app-admin/eclean-kernel
 *     app-portage/diffmask
 *     app-portage/flaggie
 *     app-portage/portpeek
 *     app-portage/smart-live-rebuild
 * Messages for package net-fs/cifs-utils-7.0:
 * Log file: /var/log/portage/net-fs:cifs-utils-7.0:20240616-205005.log
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * setuid use flag was dropped due to multiple security implications
 * such as CVE-2009-2948, CVE-2011-3585 and CVE-2012-1586
 * You are free to set setuid flags by yourself
 * Messages for package net-misc/chrony-4.5:
 * Log file: /var/log/portage/net-misc:chrony-4.5:20240616-205009.log
 * To enable seccomp in a stricter mode, please modify:
 * - /etc/conf.d/chronyd for OpenRC
 * - systemctl edit chronyd for systemd
 * to use -F 1 or -F -1 instead of -F 2 (see man chronyd)
 * By default, we now use -F 2 which is a baseline/minimal filter.
 * Messages for package sys-block/gparted-1.6.0:
 * Log file: /var/log/portage/sys-block:gparted-1.6.0:20240616-205018.log
 * Install additional packages for optional runtime features:
 *   sys-fs/btrfs-progs for BTRFS support
 *   sys-fs/exfatprogs for exFAT support
 *   sys-fs/f2fs-tools for F2FS support
 *   sys-fs/jfsutils for JFS support
 *   sys-fs/mdadm for MDADM support
 *   sys-fs/ntfs3g[ntfsprogs] for NTFS support
 *   sys-fs/reiser4progs for Reiser4 support
 *   sys-fs/reiserfsprogs for ReiserFS support
 *   sys-fs/udftools for UDF support
 * Messages for package sys-fs/mdadm-4.2-r3:
 * Log file: /var/log/portage/sys-fs:mdadm-4.2-r3:20240616-205027.log
 * If you're not relying on kernel auto-detect of your RAID
 * devices, you need to add 'mdraid' to your 'boot' runlevel:
 * 	rc-update add mdraid boot
 * Messages for package sys-process/iotop-0.6_p20230124:
 * Log file: /var/log/portage/sys-process:iotop-0.6_p20230124:20240616-205032.log
 * Since Linux 5.14, sysctl kernel.task_delayacct should be enabled
 * This can be enabled by running: 'sysctl kernel.task_delayacct=1' 
 * And can be made persistent by adding 'kernel.task_delayacct = 1' to /etc/sysctl.conf
 * Messages for package kde-frameworks/kfilemetadata-5.116.0:
 * Log file: /var/log/portage/kde-frameworks:kfilemetadata-5.116.0:20240616-205736.log
 * Install additional packages for optional runtime features:
 *   app-text/catdoc for Microsoft Word/Powerpoint file indexing
 *   dev-libs/libxls for Microsoft Excel file indexing
 * Messages for package dev-qt/qttools-6.7.1:
 * Log file: /var/log/portage/dev-qt:qttools-6.7.1:20240616-210427.log
 * Install additional packages for optional runtime features:
 *   dev-qt/qt-docs:6[qch] for Qt documentation viewable in assistant
 * Messages for package gnome-base/gnome-keyring-42.1-r2:
 * Log file: /var/log/portage/gnome-base:gnome-keyring-42.1-r2:20240616-211450.log
 * Please select pinentry-gnome3 as default pinentry provider:
 *  # eselect pinentry set pinentry-gnome3
 * Messages for package media-libs/libpulse-17.0:
 * Log file: /var/log/portage/media-libs:libpulse-17.0:20240616-211533.log
 * PulseAudio can be enhanced by installing the following:
 *   sys-auth/rtkit for restricted realtime capabilities via D-Bus
 * Messages for package x11-libs/gtk+-2.24.33-r3:
 * Log file: /var/log/portage/x11-libs:gtk+-2.24.33-r3:20240616-211536.log
 * Please install app-text/evince for print preview functionality.
 * Alternatively, check "gtk-print-preview-command" documentation and
 * add it to your gtkrc.
 * To make the gtk2 file chooser use 'current directory' mode by default,
 * edit ~/.config/gtk-2.0/gtkfilechooser.ini to contain the following:
 * [Filechooser Settings]
 * StartupMode=cwd
 * 
 * (Note: Above message is only printed the first time package is
 * installed. Please look at /usr/share/doc/gtk+-2.24.33-r3/README.gentoo*
 * for future reference)
 * Messages for package media-video/pipewire-1.0.5:
 * Log file: /var/log/portage/media-video:pipewire-1.0.5:20240616-211626.log
 * For latest tips and tricks, troubleshooting information, and documentation
 * in general, please refer to https://wiki.gentoo.org/wiki/PipeWire
 * 
 * The following can be installed for optional runtime features:
 *   sys-auth/rtkit for restricted realtime capabilities via D-Bus
 *   media-plugins/alsa-plugins[pulseaudio] for ALSA plugin to use PulseAudio interface for output
 * Messages for package media-video/wireplumber-0.4.17-r1:
 * Log file: /var/log/portage/media-video:wireplumber-0.4.17-r1:20240616-211634.log
 * Switch to WirePlumber will happen the next time gentoo-pipewire-launcher
 * is started (a replacement for directly calling pipewire binary).
 * 
 * Please ensure that /etc/pipewire/pipewire.conf either does not exist
 * or, if it does exist, that any reference to
 * /usr/bin/pipewire-media-session is commented out (begins with a #).
 * Messages for package sys-apps/xdg-desktop-portal-1.18.4:
 * Log file: /var/log/portage/sys-apps:xdg-desktop-portal-1.18.4:20240616-211654.log
 * xdg-desktop-portal is not usable without any of the following XDP
 * implementations installed:
 *   gui-libs/xdg-desktop-portal-lxqt
 *   gui-libs/xdg-desktop-portal-wlr
 *   kde-plasma/xdg-desktop-portal-kde
 *   sys-apps/xdg-desktop-portal-gnome
 *   sys-apps/xdg-desktop-portal-gtk
 * Messages for package dev-qt/qtwebengine-5.15.14_p20240510:
 * Log file: /var/log/portage/dev-qt:qtwebengine-5.15.14_p20240510:20240616-211645.log
 * This version of Qt WebEngine is based on Chromium version 87.0.4280.144,
 * with additional security fixes from newer versions. Extensive as it is, the
 * list of backports is impossible to evaluate, but always bound to be behind
 * Chromium's release schedule.
 * In addition, various online services may deny service based on an outdated
 * user agent version (and/or other checks). Google is already known to do so.
 * 
 * tldr: Your web browsing experience will be compromised.
 * Messages for package kde-frameworks/kwallet-5.116.0:
 * Log file: /var/log/portage/kde-frameworks:kwallet-5.116.0:20240616-220116.log
 * Install additional packages for optional runtime features:
 *   kde-plasma/kwallet-pam:5 for Auto-unlocking after account login
 *   kde-apps/kwalletmanager:5 for KWallet management
 * For more information, read https://wiki.gentoo.org/wiki/KDE#KWallet
 * Messages for package dev-vcs/subversion-1.14.2-r1:
 * Log file: /var/log/portage/dev-vcs:subversion-1.14.2-r1:20240616-220203.log
 * If you run subversion as a daemon, you will need to restart it to avoid module mismatches.
 * Messages for package kde-plasma/ksshaskpass-5.27.11:
 * Log file: /var/log/portage/kde-plasma:ksshaskpass-5.27.11:20240616-220206.log
 * In order to have ssh-agent start with Plasma 5,
 * edit /etc/xdg/plasma-workspace/env/10-agent-startup.sh
 * and uncomment the lines enabling ssh-agent.
 * 
 * If you do so, do not forget to uncomment the respective
 * lines in /etc/xdg/plasma-workspace/shutdown/10-agent-shutdown.sh
 * to properly kill the agent when the session ends.
 * 
 * ksshaskpass has been installed as your default askpass application
 * for Plasma 5 sessions.
 * If that's not desired, select the one you want to use in
 * /etc/xdg/plasma-workspace/env/05-ksshaskpass.sh
 * Messages for package kde-plasma/kwallet-pam-5.27.11:
 * Log file: /var/log/portage/kde-plasma:kwallet-pam-5.27.11:20240616-220207.log
 * This package enables auto-unlocking of kde-frameworks/kwallet:5.
 * See also: https://wiki.gentoo.org/wiki/KDE#KWallet_auto-unlocking
 * Messages for package media-video/mpv-0.38.0:
 * Log file: /var/log/portage/media-video:mpv-0.38.0:20240616-220204.log
 * Install additional packages for optional runtime features:
 *   net-misc/yt-dlp for various websites URL support




































































































































































































































































































16 Jun 2024 22:03:45 UTC: ERROR   : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/controller.sh', 'build_packages', 'app-accessibility/brltty', 'app-accessibility/espeakup', 'app-admin/hddtemp', 'app-admin/sudo', 'app-admin/syslog-ng', 'app-admin/sysstat', 'app-admin/testdisk', 'app-arch/bzip2', 'app-arch/cpio', 'app-arch/dpkg', 'app-arch/deb2targz', 'app-arch/gzip', 'app-arch/mt-st', 'app-arch/p7zip', 'app-arch/pbzip2', 'app-arch/rpm', 'app-arch/tar', 'app-arch/zip', 'app-arch/unrar', 'app-backup/fsarchiver', 'app-benchmarks/bonnie', 'app-benchmarks/bonnie++', 'app-benchmarks/dbench', 'app-benchmarks/iozone', 'app-benchmarks/stress', 'app-benchmarks/tiobench', 'app-cdr/dvd+rw-tools', 'app-cdr/cdrtools', 'app-crypt/chntpw', 'app-crypt/gnupg', 'app-crypt/pinentry', 'app-editors/emacs', 'app-editors/gedit', 'app-editors/ghex', 'app-editors/hexedit', 'app-editors/joe', 'app-editors/mg', 'app-editors/nano', 'app-editors/vim', 'app-emacs/ebuild-mode', 'app-emulation/cloud
 -init', 'app-emulation/spice-vdagent', 'app-eselect/eselect-repository', 'app-misc/colordiff', 'app-misc/livecd-tools', 'app-misc/mc', 'app-misc/pax-utils', 'app-misc/screen', 'app-misc/tmux', 'app-misc/wipe', 'app-office/libreoffice', 'app-portage/cpuid2cpuflags', 'app-portage/eix', 'app-portage/genlop', 'app-portage/gentoolkit', 'app-portage/mirrorselect', 'app-portage/portage-utils', 'app-portage/pram', 'app-portage/ufed', 'app-shells/bash-completion', 'app-shells/gentoo-bashcomp', 'app-text/bibutils', 'app-text/dos2unix', 'app-text/ghostscript-gpl', 'app-text/pdftk', 'app-text/recode', 'app-text/tree', 'app-text/wgetpaste', 'app-text/xournalpp', 'app-vim/gentoo-syntax', 'dev-debug/strace', 'dev-lang/perl', 'dev-lang/python', 'dev-util/kdevelop', 'dev-vcs/git', 'dev-vcs/kdesvn', 'dev-vcs/subversion', 'kde-apps/k3b', 'kde-apps/kde-apps-meta', 'kde-apps/kdenlive', 'kde-apps/kompare', 'kde-misc/kdiff3', 'kde-plasma/plasma-meta', 'media-gfx/digikam', 'media-gfx/engauge', 'media-gfx/f
 bgrab', 'media-gfx/gimp', 'media-gfx/graphviz', 'media-gfx/hugin', 'media-gfx/inkscape', 'media-gfx/jhead', 'media-gfx/pngcrush', 'media-gfx/pngquant', 'media-gfx/povray', 'media-sound/alsa-utils', 'media-video/mpv', 'net-analyzer/iptraf-ng', 'net-analyzer/nmap', 'net-analyzer/openbsd-netcat', 'net-analyzer/tcpdump', 'net-analyzer/tcptraceroute', 'net-analyzer/traceroute', 'net-dialup/minicom', 'net-dialup/mingetty', 'net-dialup/pptpclient', 'net-dialup/rp-pppoe', 'net-dns/bind-tools', 'net-fs/cifs-utils', 'net-fs/nfs-utils', 'net-ftp/ftp', 'net-ftp/ncftp', 'net-im/pidgin', 'net-irc/hexchat', 'net-irc/irssi', 'net-irc/quassel', 'net-irc/weechat', 'net-misc/chrony', 'net-misc/chrony', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ndisc6', 'net-misc/openssh', 'net-misc/rdate', 'net-misc/rdesktop', 'net-misc/rsync', 'net-misc/telnet-bsd', 'net-misc/vconfig', 'net-misc/wget', 'net-misc/whois', 'net-proxy/dante', 'net-proxy/tsocks', 'net-vpn/networkmanager-openvpn', 'net-vpn/networkma
 nager-pptp', 'net-vpn/openfortivpn', 'net-vpn/openvpn', 'net-vpn/tor', 'net-wireless/b43-fwcutter', 'net-wireless/iw', 'net-wireless/wireless-tools', 'net-wireless/wpa_supplicant', 'sys-apps/arch-chroot', 'sys-apps/arrayprobe', 'sys-apps/acl', 'sys-apps/attr', 'sys-apps/busybox', 'sys-apps/cciss_vol_status', 'sys-apps/chname', 'sys-apps/coreutils', 'sys-apps/dcfldd', 'sys-apps/diffutils', 'sys-apps/dmidecode', 'sys-apps/dstat', 'sys-apps/ethtool', 'sys-apps/file', 'sys-apps/findutils', 'sys-apps/flashrom', 'sys-apps/fxload', 'sys-apps/gawk', 'sys-apps/gptfdisk', 'sys-apps/hdparm', 'sys-apps/hwinfo', 'sys-apps/ipmitool', 'sys-apps/iproute2', 'sys-apps/inxi', 'sys-apps/less', 'sys-apps/man-db', 'sys-apps/man-pages', 'sys-apps/man-pages-posix', 'sys-apps/memtester', 'sys-apps/memtest86+', 'sys-apps/mlocate', 'sys-apps/netplug', 'sys-apps/nvme-cli', 'sys-apps/pciutils', 'sys-apps/pcmciautils', 'sys-apps/pv', 'sys-apps/sdparm', 'sys-apps/sed', 'sys-apps/setserial', 'sys-apps/sg3_utils', 
 'sys-apps/smartmontools', 'sys-apps/which', 'sys-apps/usbutils', 'sys-apps/util-linux', 'sys-auth/ssh-import-id', 'sys-block/aoetools', 'sys-block/fio', 'sys-block/gparted', 'sys-block/mtx', 'sys-block/open-iscsi', 'sys-block/parted', 'sys-block/partimage', 'sys-block/tw_cli', 'sys-block/whdd', 'sys-boot/efibootmgr', 'sys-boot/grub', 'sys-firmware/b43-firmware', 'sys-firmware/ipw2100-firmware', 'sys-firmware/ipw2200-firmware', 'sys-fs/bcache-tools', 'sys-fs/btrfs-progs', 'sys-fs/cryptsetup', 'sys-fs/ddrescue', 'sys-fs/dmraid', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/exfat-utils', 'sys-fs/extundelete', 'sys-fs/fuse-exfat', 'sys-fs/f2fs-tools', 'sys-fs/genfstab', 'sys-fs/growpart', 'sys-fs/jfsutils', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mac-fdisk', 'sys-fs/mdadm', 'sys-fs/multipath-tools', 'sys-fs/ntfs3g', 'sys-fs/reiserfsprogs', 'sys-fs/squashfs-tools', 'sys-fs/xfsdump', 'sys-fs/xfsprogs', 'sys-kernel/dracut', 'sys-kernel/installkernel', 'sys-kernel/linux-firmware', 'sys-
 libs/gpm', 'sys-power/acpid', 'sys-process/htop', 'sys-process/lsof', 'sys-process/iotop', 'sys-process/procps', 'sys-process/psmisc', 'www-client/chromium', 'www-client/firefox', 'www-client/links', 'x11-misc/sddm', 'x11-wm/fluxbox']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/controller.sh', 'build_packages', 'app-accessibility/brltty', 'app-accessibility/espeakup', 'app-admin/hddtemp', 'app-admin/sudo', 'app-admin/syslog-ng', 'app-admin/sysstat', 'app-admin/testdisk', 'app-arch/bzip2', 'app-arch/cpio', 'app-arch/dpkg', 'app-arch/deb2targz', 'app-arch/gzip', 'app-arch/mt-st', 'app-arch/p7zip', 'app-arch/pbzip2', 'app-arch/rpm', 'app-arch/tar', 'app-arch/zip', 'app-arch/unrar', 'app-backup/fsarchiver', 'app-benchmarks/bonnie', 'app-benchmarks/bonnie++', 'app-benchmarks/dbench', 'app-benchmarks/iozone', 'app-benchmarks/stress', 'app-benchmarks/tiobench', 'app-cdr/dvd+rw-tools', 'app-cdr/cdrtools', 'app-crypt/chntpw', 'app-crypt/gnupg', 'app-crypt/pinentry', 'app-editors/emacs', 'app-editors/gedit', 'app-editors/ghex', 'app-editors/hexedit', 'app-editors/joe', 'app-editors/mg', 'app-editors/nano', 'app-editors/vim', 'app-emacs/ebuild-mode', 'app-emulation/cloud-init', 'app-emulatio
 n/spice-vdagent', 'app-eselect/eselect-repository', 'app-misc/colordiff', 'app-misc/livecd-tools', 'app-misc/mc', 'app-misc/pax-utils', 'app-misc/screen', 'app-misc/tmux', 'app-misc/wipe', 'app-office/libreoffice', 'app-portage/cpuid2cpuflags', 'app-portage/eix', 'app-portage/genlop', 'app-portage/gentoolkit', 'app-portage/mirrorselect', 'app-portage/portage-utils', 'app-portage/pram', 'app-portage/ufed', 'app-shells/bash-completion', 'app-shells/gentoo-bashcomp', 'app-text/bibutils', 'app-text/dos2unix', 'app-text/ghostscript-gpl', 'app-text/pdftk', 'app-text/recode', 'app-text/tree', 'app-text/wgetpaste', 'app-text/xournalpp', 'app-vim/gentoo-syntax', 'dev-debug/strace', 'dev-lang/perl', 'dev-lang/python', 'dev-util/kdevelop', 'dev-vcs/git', 'dev-vcs/kdesvn', 'dev-vcs/subversion', 'kde-apps/k3b', 'kde-apps/kde-apps-meta', 'kde-apps/kdenlive', 'kde-apps/kompare', 'kde-misc/kdiff3', 'kde-plasma/plasma-meta', 'media-gfx/digikam', 'media-gfx/engauge', 'media-gfx/fbgrab', 'media-gfx/gi
 mp', 'media-gfx/graphviz', 'media-gfx/hugin', 'media-gfx/inkscape', 'media-gfx/jhead', 'media-gfx/pngcrush', 'media-gfx/pngquant', 'media-gfx/povray', 'media-sound/alsa-utils', 'media-video/mpv', 'net-analyzer/iptraf-ng', 'net-analyzer/nmap', 'net-analyzer/openbsd-netcat', 'net-analyzer/tcpdump', 'net-analyzer/tcptraceroute', 'net-analyzer/traceroute', 'net-dialup/minicom', 'net-dialup/mingetty', 'net-dialup/pptpclient', 'net-dialup/rp-pppoe', 'net-dns/bind-tools', 'net-fs/cifs-utils', 'net-fs/nfs-utils', 'net-ftp/ftp', 'net-ftp/ncftp', 'net-im/pidgin', 'net-irc/hexchat', 'net-irc/irssi', 'net-irc/quassel', 'net-irc/weechat', 'net-misc/chrony', 'net-misc/chrony', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ndisc6', 'net-misc/openssh', 'net-misc/rdate', 'net-misc/rdesktop', 'net-misc/rsync', 'net-misc/telnet-bsd', 'net-misc/vconfig', 'net-misc/wget', 'net-misc/whois', 'net-proxy/dante', 'net-proxy/tsocks', 'net-vpn/networkmanager-openvpn', 'net-vpn/networkmanager-pptp', 'net-vpn
 /openfortivpn', 'net-vpn/openvpn', 'net-vpn/tor', 'net-wireless/b43-fwcutter', 'net-wireless/iw', 'net-wireless/wireless-tools', 'net-wireless/wpa_supplicant', 'sys-apps/arch-chroot', 'sys-apps/arrayprobe', 'sys-apps/acl', 'sys-apps/attr', 'sys-apps/busybox', 'sys-apps/cciss_vol_status', 'sys-apps/chname', 'sys-apps/coreutils', 'sys-apps/dcfldd', 'sys-apps/diffutils', 'sys-apps/dmidecode', 'sys-apps/dstat', 'sys-apps/ethtool', 'sys-apps/file', 'sys-apps/findutils', 'sys-apps/flashrom', 'sys-apps/fxload', 'sys-apps/gawk', 'sys-apps/gptfdisk', 'sys-apps/hdparm', 'sys-apps/hwinfo', 'sys-apps/ipmitool', 'sys-apps/iproute2', 'sys-apps/inxi', 'sys-apps/less', 'sys-apps/man-db', 'sys-apps/man-pages', 'sys-apps/man-pages-posix', 'sys-apps/memtester', 'sys-apps/memtest86+', 'sys-apps/mlocate', 'sys-apps/netplug', 'sys-apps/nvme-cli', 'sys-apps/pciutils', 'sys-apps/pcmciautils', 'sys-apps/pv', 'sys-apps/sdparm', 'sys-apps/sed', 'sys-apps/setserial', 'sys-apps/sg3_utils', 'sys-apps/smartmontoo
 ls', 'sys-apps/which', 'sys-apps/usbutils', 'sys-apps/util-linux', 'sys-auth/ssh-import-id', 'sys-block/aoetools', 'sys-block/fio', 'sys-block/gparted', 'sys-block/mtx', 'sys-block/open-iscsi', 'sys-block/parted', 'sys-block/partimage', 'sys-block/tw_cli', 'sys-block/whdd', 'sys-boot/efibootmgr', 'sys-boot/grub', 'sys-firmware/b43-firmware', 'sys-firmware/ipw2100-firmware', 'sys-firmware/ipw2200-firmware', 'sys-fs/bcache-tools', 'sys-fs/btrfs-progs', 'sys-fs/cryptsetup', 'sys-fs/ddrescue', 'sys-fs/dmraid', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/exfat-utils', 'sys-fs/extundelete', 'sys-fs/fuse-exfat', 'sys-fs/f2fs-tools', 'sys-fs/genfstab', 'sys-fs/growpart', 'sys-fs/jfsutils', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mac-fdisk', 'sys-fs/mdadm', 'sys-fs/multipath-tools', 'sys-fs/ntfs3g', 'sys-fs/reiserfsprogs', 'sys-fs/squashfs-tools', 'sys-fs/xfsdump', 'sys-fs/xfsprogs', 'sys-kernel/dracut', 'sys-kernel/installkernel', 'sys-kernel/linux-firmware', 'sys-libs/gpm', 'sys-power
 /acpid', 'sys-process/htop', 'sys-process/lsof', 'sys-process/iotop', 'sys-process/procps', 'sys-process/psmisc', 'www-client/chromium', 'www-client/firefox', 'www-client/links', 'x11-misc/sddm', 'x11-wm/fluxbox']) exited 1
16 Jun 2024 22:03:45 UTC: ERROR   : Exception running action sequence build_packages
Traceback (most recent call last):
  File "/usr/lib/python3.11/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
    func()
  File "/usr/lib/python3.11/site-packages/catalyst/base/stagebase.py", line 1587, in build_packages
    cmd(command, env=self.env)
  File "/usr/lib/python3.11/site-packages/catalyst/support.py", line 66, in cmd
    raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/controller.sh', 'build_packages', 'app-accessibility/brltty', 'app-accessibility/espeakup', 'app-admin/hddtemp', 'app-admin/sudo', 'app-admin/syslog-ng', 'app-admin/sysstat', 'app-admin/testdisk', 'app-arch/bzip2', 'app-arch/cpio', 'app-arch/dpkg', 'app-arch/deb2targz', 'app-arch/gzip', 'app-arch/mt-st', 'app-arch/p7zip', 'app-arch/pbzip2', 'app-arch/rpm', 'app-arch/tar', 'app-arch/zip', 'app-arch/unrar', 'app-backup/fsarchiver', 'app-benchmarks/bonnie', 'app-benchmarks/bonnie++', 'app-benchmarks/dbench', 'app-benchmarks/iozone', 'app-benchmarks/stress', 'app-benchmarks/tiobench', 'app-cdr/dvd+rw-tools', 'app-cdr/cdrtools', 'app-crypt/chntpw', 'app-crypt/gnupg', 'app-crypt/pinentry', 'app-editors/emacs', 'app-editors/gedit', 'app-editors/ghex', 'app-editors/hexedit', 'app-editors/joe', 'app-editors/mg', 'app-editors/nano', 'app-editors/vim', 'app-emacs/ebuild-mode', 'app-emulation/cloud-init', 'app-emulat
 ion/spice-vdagent', 'app-eselect/eselect-repository', 'app-misc/colordiff', 'app-misc/livecd-tools', 'app-misc/mc', 'app-misc/pax-utils', 'app-misc/screen', 'app-misc/tmux', 'app-misc/wipe', 'app-office/libreoffice', 'app-portage/cpuid2cpuflags', 'app-portage/eix', 'app-portage/genlop', 'app-portage/gentoolkit', 'app-portage/mirrorselect', 'app-portage/portage-utils', 'app-portage/pram', 'app-portage/ufed', 'app-shells/bash-completion', 'app-shells/gentoo-bashcomp', 'app-text/bibutils', 'app-text/dos2unix', 'app-text/ghostscript-gpl', 'app-text/pdftk', 'app-text/recode', 'app-text/tree', 'app-text/wgetpaste', 'app-text/xournalpp', 'app-vim/gentoo-syntax', 'dev-debug/strace', 'dev-lang/perl', 'dev-lang/python', 'dev-util/kdevelop', 'dev-vcs/git', 'dev-vcs/kdesvn', 'dev-vcs/subversion', 'kde-apps/k3b', 'kde-apps/kde-apps-meta', 'kde-apps/kdenlive', 'kde-apps/kompare', 'kde-misc/kdiff3', 'kde-plasma/plasma-meta', 'media-gfx/digikam', 'media-gfx/engauge', 'media-gfx/fbgrab', 'media-gfx/
 gimp', 'media-gfx/graphviz', 'media-gfx/hugin', 'media-gfx/inkscape', 'media-gfx/jhead', 'media-gfx/pngcrush', 'media-gfx/pngquant', 'media-gfx/povray', 'media-sound/alsa-utils', 'media-video/mpv', 'net-analyzer/iptraf-ng', 'net-analyzer/nmap', 'net-analyzer/openbsd-netcat', 'net-analyzer/tcpdump', 'net-analyzer/tcptraceroute', 'net-analyzer/traceroute', 'net-dialup/minicom', 'net-dialup/mingetty', 'net-dialup/pptpclient', 'net-dialup/rp-pppoe', 'net-dns/bind-tools', 'net-fs/cifs-utils', 'net-fs/nfs-utils', 'net-ftp/ftp', 'net-ftp/ncftp', 'net-im/pidgin', 'net-irc/hexchat', 'net-irc/irssi', 'net-irc/quassel', 'net-irc/weechat', 'net-misc/chrony', 'net-misc/chrony', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ndisc6', 'net-misc/openssh', 'net-misc/rdate', 'net-misc/rdesktop', 'net-misc/rsync', 'net-misc/telnet-bsd', 'net-misc/vconfig', 'net-misc/wget', 'net-misc/whois', 'net-proxy/dante', 'net-proxy/tsocks', 'net-vpn/networkmanager-openvpn', 'net-vpn/networkmanager-pptp', 'net-v
 pn/openfortivpn', 'net-vpn/openvpn', 'net-vpn/tor', 'net-wireless/b43-fwcutter', 'net-wireless/iw', 'net-wireless/wireless-tools', 'net-wireless/wpa_supplicant', 'sys-apps/arch-chroot', 'sys-apps/arrayprobe', 'sys-apps/acl', 'sys-apps/attr', 'sys-apps/busybox', 'sys-apps/cciss_vol_status', 'sys-apps/chname', 'sys-apps/coreutils', 'sys-apps/dcfldd', 'sys-apps/diffutils', 'sys-apps/dmidecode', 'sys-apps/dstat', 'sys-apps/ethtool', 'sys-apps/file', 'sys-apps/findutils', 'sys-apps/flashrom', 'sys-apps/fxload', 'sys-apps/gawk', 'sys-apps/gptfdisk', 'sys-apps/hdparm', 'sys-apps/hwinfo', 'sys-apps/ipmitool', 'sys-apps/iproute2', 'sys-apps/inxi', 'sys-apps/less', 'sys-apps/man-db', 'sys-apps/man-pages', 'sys-apps/man-pages-posix', 'sys-apps/memtester', 'sys-apps/memtest86+', 'sys-apps/mlocate', 'sys-apps/netplug', 'sys-apps/nvme-cli', 'sys-apps/pciutils', 'sys-apps/pcmciautils', 'sys-apps/pv', 'sys-apps/sdparm', 'sys-apps/sed', 'sys-apps/setserial', 'sys-apps/sg3_utils', 'sys-apps/smartmont
 ools', 'sys-apps/which', 'sys-apps/usbutils', 'sys-apps/util-linux', 'sys-auth/ssh-import-id', 'sys-block/aoetools', 'sys-block/fio', 'sys-block/gparted', 'sys-block/mtx', 'sys-block/open-iscsi', 'sys-block/parted', 'sys-block/partimage', 'sys-block/tw_cli', 'sys-block/whdd', 'sys-boot/efibootmgr', 'sys-boot/grub', 'sys-firmware/b43-firmware', 'sys-firmware/ipw2100-firmware', 'sys-firmware/ipw2200-firmware', 'sys-fs/bcache-tools', 'sys-fs/btrfs-progs', 'sys-fs/cryptsetup', 'sys-fs/ddrescue', 'sys-fs/dmraid', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/exfat-utils', 'sys-fs/extundelete', 'sys-fs/fuse-exfat', 'sys-fs/f2fs-tools', 'sys-fs/genfstab', 'sys-fs/growpart', 'sys-fs/jfsutils', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mac-fdisk', 'sys-fs/mdadm', 'sys-fs/multipath-tools', 'sys-fs/ntfs3g', 'sys-fs/reiserfsprogs', 'sys-fs/squashfs-tools', 'sys-fs/xfsdump', 'sys-fs/xfsprogs', 'sys-kernel/dracut', 'sys-kernel/installkernel', 'sys-kernel/linux-firmware', 'sys-libs/gpm', 'sys-pow
 er/acpid', 'sys-process/htop', 'sys-process/lsof', 'sys-process/iotop', 'sys-process/procps', 'sys-process/psmisc', 'www-client/chromium', 'www-client/firefox', 'www-client/links', 'x11-misc/sddm', 'x11-wm/fluxbox']) exited 1
ERROR:catalyst:Exception running action sequence build_packages
Traceback (most recent call last):
  File "/usr/lib/python3.11/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
    func()
  File "/usr/lib/python3.11/site-packages/catalyst/base/stagebase.py", line 1587, in build_packages
    cmd(command, env=self.env)
  File "/usr/lib/python3.11/site-packages/catalyst/support.py", line 66, in cmd
    raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/controller.sh', 'build_packages', 'app-accessibility/brltty', 'app-accessibility/espeakup', 'app-admin/hddtemp', 'app-admin/sudo', 'app-admin/syslog-ng', 'app-admin/sysstat', 'app-admin/testdisk', 'app-arch/bzip2', 'app-arch/cpio', 'app-arch/dpkg', 'app-arch/deb2targz', 'app-arch/gzip', 'app-arch/mt-st', 'app-arch/p7zip', 'app-arch/pbzip2', 'app-arch/rpm', 'app-arch/tar', 'app-arch/zip', 'app-arch/unrar', 'app-backup/fsarchiver', 'app-benchmarks/bonnie', 'app-benchmarks/bonnie++', 'app-benchmarks/dbench', 'app-benchmarks/iozone', 'app-benchmarks/stress', 'app-benchmarks/tiobench', 'app-cdr/dvd+rw-tools', 'app-cdr/cdrtools', 'app-crypt/chntpw', 'app-crypt/gnupg', 'app-crypt/pinentry', 'app-editors/emacs', 'app-editors/gedit', 'app-editors/ghex', 'app-editors/hexedit', 'app-editors/joe', 'app-editors/mg', 'app-editors/nano', 'app-editors/vim', 'app-emacs/ebuild-mode', 'app-emulation/cloud-init', 'app-emulat
 ion/spice-vdagent', 'app-eselect/eselect-repository', 'app-misc/colordiff', 'app-misc/livecd-tools', 'app-misc/mc', 'app-misc/pax-utils', 'app-misc/screen', 'app-misc/tmux', 'app-misc/wipe', 'app-office/libreoffice', 'app-portage/cpuid2cpuflags', 'app-portage/eix', 'app-portage/genlop', 'app-portage/gentoolkit', 'app-portage/mirrorselect', 'app-portage/portage-utils', 'app-portage/pram', 'app-portage/ufed', 'app-shells/bash-completion', 'app-shells/gentoo-bashcomp', 'app-text/bibutils', 'app-text/dos2unix', 'app-text/ghostscript-gpl', 'app-text/pdftk', 'app-text/recode', 'app-text/tree', 'app-text/wgetpaste', 'app-text/xournalpp', 'app-vim/gentoo-syntax', 'dev-debug/strace', 'dev-lang/perl', 'dev-lang/python', 'dev-util/kdevelop', 'dev-vcs/git', 'dev-vcs/kdesvn', 'dev-vcs/subversion', 'kde-apps/k3b', 'kde-apps/kde-apps-meta', 'kde-apps/kdenlive', 'kde-apps/kompare', 'kde-misc/kdiff3', 'kde-plasma/plasma-meta', 'media-gfx/digikam', 'media-gfx/engauge', 'media-gfx/fbgrab', 'media-gfx/
 gimp', 'media-gfx/graphviz', 'media-gfx/hugin', 'media-gfx/inkscape', 'media-gfx/jhead', 'media-gfx/pngcrush', 'media-gfx/pngquant', 'media-gfx/povray', 'media-sound/alsa-utils', 'media-video/mpv', 'net-analyzer/iptraf-ng', 'net-analyzer/nmap', 'net-analyzer/openbsd-netcat', 'net-analyzer/tcpdump', 'net-analyzer/tcptraceroute', 'net-analyzer/traceroute', 'net-dialup/minicom', 'net-dialup/mingetty', 'net-dialup/pptpclient', 'net-dialup/rp-pppoe', 'net-dns/bind-tools', 'net-fs/cifs-utils', 'net-fs/nfs-utils', 'net-ftp/ftp', 'net-ftp/ncftp', 'net-im/pidgin', 'net-irc/hexchat', 'net-irc/irssi', 'net-irc/quassel', 'net-irc/weechat', 'net-misc/chrony', 'net-misc/chrony', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ndisc6', 'net-misc/openssh', 'net-misc/rdate', 'net-misc/rdesktop', 'net-misc/rsync', 'net-misc/telnet-bsd', 'net-misc/vconfig', 'net-misc/wget', 'net-misc/whois', 'net-proxy/dante', 'net-proxy/tsocks', 'net-vpn/networkmanager-openvpn', 'net-vpn/networkmanager-pptp', 'net-v
 pn/openfortivpn', 'net-vpn/openvpn', 'net-vpn/tor', 'net-wireless/b43-fwcutter', 'net-wireless/iw', 'net-wireless/wireless-tools', 'net-wireless/wpa_supplicant', 'sys-apps/arch-chroot', 'sys-apps/arrayprobe', 'sys-apps/acl', 'sys-apps/attr', 'sys-apps/busybox', 'sys-apps/cciss_vol_status', 'sys-apps/chname', 'sys-apps/coreutils', 'sys-apps/dcfldd', 'sys-apps/diffutils', 'sys-apps/dmidecode', 'sys-apps/dstat', 'sys-apps/ethtool', 'sys-apps/file', 'sys-apps/findutils', 'sys-apps/flashrom', 'sys-apps/fxload', 'sys-apps/gawk', 'sys-apps/gptfdisk', 'sys-apps/hdparm', 'sys-apps/hwinfo', 'sys-apps/ipmitool', 'sys-apps/iproute2', 'sys-apps/inxi', 'sys-apps/less', 'sys-apps/man-db', 'sys-apps/man-pages', 'sys-apps/man-pages-posix', 'sys-apps/memtester', 'sys-apps/memtest86+', 'sys-apps/mlocate', 'sys-apps/netplug', 'sys-apps/nvme-cli', 'sys-apps/pciutils', 'sys-apps/pcmciautils', 'sys-apps/pv', 'sys-apps/sdparm', 'sys-apps/sed', 'sys-apps/setserial', 'sys-apps/sg3_utils', 'sys-apps/smartmont
 ools', 'sys-apps/which', 'sys-apps/usbutils', 'sys-apps/util-linux', 'sys-auth/ssh-import-id', 'sys-block/aoetools', 'sys-block/fio', 'sys-block/gparted', 'sys-block/mtx', 'sys-block/open-iscsi', 'sys-block/parted', 'sys-block/partimage', 'sys-block/tw_cli', 'sys-block/whdd', 'sys-boot/efibootmgr', 'sys-boot/grub', 'sys-firmware/b43-firmware', 'sys-firmware/ipw2100-firmware', 'sys-firmware/ipw2200-firmware', 'sys-fs/bcache-tools', 'sys-fs/btrfs-progs', 'sys-fs/cryptsetup', 'sys-fs/ddrescue', 'sys-fs/dmraid', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/exfat-utils', 'sys-fs/extundelete', 'sys-fs/fuse-exfat', 'sys-fs/f2fs-tools', 'sys-fs/genfstab', 'sys-fs/growpart', 'sys-fs/jfsutils', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mac-fdisk', 'sys-fs/mdadm', 'sys-fs/multipath-tools', 'sys-fs/ntfs3g', 'sys-fs/reiserfsprogs', 'sys-fs/squashfs-tools', 'sys-fs/xfsdump', 'sys-fs/xfsprogs', 'sys-kernel/dracut', 'sys-kernel/installkernel', 'sys-kernel/linux-firmware', 'sys-libs/gpm', 'sys-pow
 er/acpid', 'sys-process/htop', 'sys-process/lsof', 'sys-process/iotop', 'sys-process/procps', 'sys-process/psmisc', 'www-client/chromium', 'www-client/firefox', 'www-client/links', 'x11-misc/sddm', 'x11-wm/fluxbox']) exited 1
Command exited with non-zero status 2
86135.62user 10593.30system 3:52:22elapsed 693%CPU (0avgtext+0avgdata 3278744maxresident)k
8477622inputs+24175344outputs (29719major+3020332369minor)pagefaults 0swaps



Full build log at /tmp/catalyst-auto.20240616T153408Z.aMUU8e/log/livegui_livegui-stage1.log