* [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage3-selinux-nomultilib.spec
@ 2020-10-15 5:32 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2020-10-15 5:32 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/amd64-auto.conf -f /release/tmp/run/catalyst-auto.20201014T214504Z.hDZ4HL/specs/hardened/stage3-selinux-nomultilib.spec
15 Oct 2020 05:31:49 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/amd64-auto.conf
15 Oct 2020 05:31:49 UTC: NOTICE : conf_values[options] = {'seedcache', 'bindist', 'kerncache', 'autoresume', 'pkgcache', 'snapcache', 'clear-autoresume', 'preserve_libs'}
15 Oct 2020 05:31:49 UTC: NOTICE : Processing spec file: /release/tmp/run/catalyst-auto.20201014T214504Z.hDZ4HL/specs/hardened/stage3-selinux-nomultilib.spec
15 Oct 2020 05:31:49 UTC: NOTICE : Using target: stage3
15 Oct 2020 05:31:49 UTC: NOTICE : Source file specification matching setting is: loose
15 Oct 2020 05:31:49 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
15 Oct 2020 05:31:50 UTC: NOTICE : Source path set to /release/buildroot/amd64-dev/tmp/hardened/stage2-amd64-hardened-selinux+nomultilib-20201014T214504Z/
15 Oct 2020 05:31:50 UTC: NOTICE : Removing AutoResume Points ...
15 Oct 2020 05:31:50 UTC: NOTICE : Emptying directory: /release/buildroot/amd64-dev/tmp/hardened/.autoresume-stage3-amd64-hardened-selinux+nomultilib-20201014T214504Z
15 Oct 2020 05:31:50 UTC: NOTICE : --- Running action sequence: unpack
15 Oct 2020 05:31:50 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
15 Oct 2020 05:31:50 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
15 Oct 2020 05:31:50 UTC: NOTICE : Removing AutoResume Points ...
15 Oct 2020 05:31:50 UTC: NOTICE : Emptying directory: /release/buildroot/amd64-dev/tmp/hardened/.autoresume-stage3-amd64-hardened-selinux+nomultilib-20201014T214504Z
15 Oct 2020 05:31:50 UTC: NOTICE : Clearing the chroot path ...
15 Oct 2020 05:31:50 UTC: NOTICE : Emptying directory: /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201014T214504Z
15 Oct 2020 05:31:50 UTC: NOTICE : Starting rsync from /release/buildroot/amd64-dev/tmp/hardened/stage2-amd64-hardened-selinux+nomultilib-20201014T214504Z/
15 Oct 2020 05:31:50 UTC: NOTICE : to /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201014T214504Z (this may take some time) ..
rsync: [receiver] write failed on "/release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201014T214504Z/usr/share/autoconf-2.69/autotest/general.m4": No space left on device (28)
rsync error: error in file IO (code 11) at receiver.c(378) [receiver=3.2.3]
rsync: [sender] write error: Broken pipe (32)
15 Oct 2020 05:32:01 UTC: ERROR : 'rsync' extraction of /release/buildroot/amd64-dev/tmp/hardened/stage2-amd64-hardened-selinux+nomultilib-20201014T214504Z/ to /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201014T214504Z failed.
15 Oct 2020 05:32:01 UTC: NOTICE : --- Running action sequence: unpack_snapshot
15 Oct 2020 05:32:01 UTC: NOTICE : --- Running action sequence: setup_confdir
rsync: [generator] recv_generator: mkdir "/release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201014T214504Z/etc/portage/package.use/releng" failed: No space left on device (28)
*** Skipping any contents from this failed directory ***
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1330) [sender=3.2.3]
15 Oct 2020 05:32:01 UTC: ERROR : CatalystError: cmd(['rsync', '-a', '/release/releng/releases/portage/stages/', '/release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201014T214504Z/etc/portage/']) exited 23
15 Oct 2020 05:32:01 UTC: ERROR : Exception running action sequence setup_confdir
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 934, in setup_confdir
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['rsync', '-a', '/release/releng/releases/portage/stages/', '/release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201014T214504Z/etc/portage/']) exited 23
15 Oct 2020 05:32:01 UTC: NOTICE : Cleaning up... Running unbind()
15 Oct 2020 05:32:01 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201014T214504Z/tmp/kerncache does not exist. Skipping
15 Oct 2020 05:32:01 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201014T214504Z/var/cache/binpkgs does not exist. Skipping
15 Oct 2020 05:32:01 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201014T214504Z/run is not a mount point. Skipping
15 Oct 2020 05:32:01 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201014T214504Z/dev/shm does not exist. Skipping
15 Oct 2020 05:32:01 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201014T214504Z/dev/pts does not exist. Skipping
15 Oct 2020 05:32:01 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201014T214504Z/var/tmp/portage does not exist. Skipping
15 Oct 2020 05:32:01 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201014T214504Z/var/cache/distfiles does not exist. Skipping
15 Oct 2020 05:32:01 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201014T214504Z/var/db/repos/gentoo does not exist. Skipping
15 Oct 2020 05:32:01 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201014T214504Z/dev is not a mount point. Skipping
15 Oct 2020 05:32:01 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201014T214504Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
2.10user 1.08system 0:12.05elapsed 26%CPU (0avgtext+0avgdata 20284maxresident)k
336inputs+8outputs (0major+19771minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20201014T214504Z.hDZ4HL/log/hardened_stage3-selinux-nomultilib.log
^ permalink raw reply [flat|nested] 15+ messages in thread* [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage3-selinux-nomultilib.spec
@ 2020-12-24 18:40 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2020-12-24 18:40 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging binary (200 of 294) app-text/docbook-xml-dtd-4.1.2-r7::gentoo
>>> Installing (200 of 294) app-text/docbook-xml-dtd-4.1.2-r7::gentoo
>>> Emerging binary (201 of 294) app-text/docbook-xml-dtd-4.2-r3::gentoo
>>> Installing (201 of 294) app-text/docbook-xml-dtd-4.2-r3::gentoo
>>> Emerging binary (202 of 294) app-text/docbook-xml-dtd-4.5-r2::gentoo
>>> Installing (202 of 294) app-text/docbook-xml-dtd-4.5-r2::gentoo
>>> Emerging (203 of 294) app-text/po4a-0.57::gentoo
>>> Emerging binary (204 of 294) dev-python/constantly-15.1.0-r1::gentoo
>>> Failed to emerge app-text/po4a-0.57
>>> Installing (204 of 294) dev-python/constantly-15.1.0-r1::gentoo
* Messages for package sys-fs/eudev-3.2.9:
*
* As of 2013-01-29, eudev-3.2.9 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package acct-group/man-0:
* Adding group 'man' to your system ...
* - Groupid: 15
* Messages for package media-fonts/dejavu-2.37:
* The following fontconfig configuration files have been installed:
*
* 20-unhint-small-dejavu-sans-mono.conf
* 20-unhint-small-dejavu-sans.conf
* 20-unhint-small-dejavu-serif.conf
* 57-dejavu-sans-mono.conf
* 57-dejavu-sans.conf
* 57-dejavu-serif.conf
*
* Use `eselect fontconfig` to enable/disable them.
* Messages for package sys-apps/baselayout-2.7:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package sys-libs/timezone-data-2020d:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package acct-user/man-1:
* Adding user 'man' to your system ...
* - Userid: 13
* - Shell: /sbin/nologin
* - Home: /dev/null
* - Groups: man
* - GECOS: added by portage for man
* Updating comment for user 'man' ...
* - Comment: System user; man
* Messages for package media-fonts/stix-fonts-1.1.1:
* The following fontconfig configuration files have been installed:
*
* 61-stix.conf
*
* Use `eselect fontconfig` to enable/disable them.
* Messages for package sys-libs/pam-1.5.1:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-auth/pambase-20201103:
* To amend the existing password policy please see the man 5
* passwdqc.conf page and then edit the /etc/security/passwdqc.conf file
*
* (Note: Above message is only printed the first time package is
* installed. Please look at /usr/share/doc/pambase-20201103/README.gentoo*
* for future reference)
* Messages for package dev-libs/libxml2-2.9.10-r4:
* Skipping XML catalog creation for stage building (bug #208887).
* Messages for package sys-fs/eudev-3.2.9:
*
* For more information on eudev on Gentoo, writing udev rules, and
* fixing known issues visit: https://wiki.gentoo.org/wiki/Eudev
* Messages for package sys-fs/udev-init-scripts-34:
* Adding udev to the sysinit runlevel
* Adding udev-trigger to the sysinit runlevel
* Messages for package sys-apps/coreutils-8.32-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.35.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package app-text/po4a-0.57:
* ERROR: app-text/po4a-0.57::gentoo failed (compile phase):
* Compilation failed
*
* Call stack:
* ebuild.sh, line 125: Called src_compile
* environment, line 1173: Called perl-module_src_compile
* environment, line 702: Called die
* The specific snippet of code:
* ./Build build || die "Compilation failed";
*
* If you need support, post the output of `emerge --info '=app-text/po4a-0.57::gentoo'`,
* the complete build log and the output of `emerge -pqv '=app-text/po4a-0.57::gentoo'`.
* The complete build log is located at '/var/tmp/portage/app-text/po4a-0.57/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-text/po4a-0.57/temp/environment'.
* Working directory: '/var/tmp/portage/app-text/po4a-0.57/work/po4a-0.57'
* S: '/var/tmp/portage/app-text/po4a-0.57/work/po4a-0.57'
24 Dec 2020 18:40:49 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
24 Dec 2020 18:40:50 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201223T214504Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201223T214504Z/var/tmp/portage is not a mount point. Skipping
24 Dec 2020 18:40:50 UTC: ERROR : CatalystError: Stage build aborting due to error.
ERROR:catalyst:CatalystError: Stage build aborting due to error.
24 Dec 2020 18:40:50 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1410, in run_local
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1419, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
ERROR:catalyst:Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1410, in run_local
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1419, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
24 Dec 2020 18:40:50 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
24 Dec 2020 18:40:50 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201223T214504Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201223T214504Z/tmp/kerncache is not a mount point. Skipping
24 Dec 2020 18:40:50 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201223T214504Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201223T214504Z/var/cache/binpkgs is not a mount point. Skipping
24 Dec 2020 18:40:50 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201223T214504Z/run is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201223T214504Z/run is not a mount point. Skipping
24 Dec 2020 18:40:50 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201223T214504Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201223T214504Z/dev/shm does not exist. Skipping
24 Dec 2020 18:40:50 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201223T214504Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201223T214504Z/dev/pts does not exist. Skipping
24 Dec 2020 18:40:50 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201223T214504Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201223T214504Z/var/tmp/portage is not a mount point. Skipping
24 Dec 2020 18:40:50 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201223T214504Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201223T214504Z/var/cache/distfiles is not a mount point. Skipping
24 Dec 2020 18:40:50 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201223T214504Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201223T214504Z/var/db/repos/gentoo is not a mount point. Skipping
24 Dec 2020 18:40:50 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201223T214504Z/dev is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201223T214504Z/dev is not a mount point. Skipping
24 Dec 2020 18:40:50 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201223T214504Z/proc is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201223T214504Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
781.23user 267.67system 16:24.63elapsed 106%CPU (0avgtext+0avgdata 121944maxresident)k
13832inputs+2562768outputs (0major+47451815minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20201223T214504Z.2OhPQP/log/hardened_stage3-selinux-nomultilib.log
^ permalink raw reply [flat|nested] 15+ messages in thread* [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage3-selinux-nomultilib.spec
@ 2020-12-22 9:33 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2020-12-22 9:33 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging (248 of 294) app-text/po4a-0.57::gentoo
>>> Emerging binary (249 of 294) dev-python/bcrypt-3.2.0::gentoo
>>> Installing (249 of 294) dev-python/bcrypt-3.2.0::gentoo
>>> Emerging binary (250 of 294) dev-python/m2r-0.2.1::gentoo
>>> Failed to emerge app-text/po4a-0.57
>>> Installing (250 of 294) dev-python/m2r-0.2.1::gentoo
* Messages for package sys-fs/eudev-3.2.9:
*
* As of 2013-01-29, eudev-3.2.9 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package acct-group/man-0:
* Adding group 'man' to your system ...
* - Groupid: 15
* Messages for package media-fonts/dejavu-2.37:
* The following fontconfig configuration files have been installed:
*
* 20-unhint-small-dejavu-sans-mono.conf
* 20-unhint-small-dejavu-sans.conf
* 20-unhint-small-dejavu-serif.conf
* 57-dejavu-sans-mono.conf
* 57-dejavu-sans.conf
* 57-dejavu-serif.conf
*
* Use `eselect fontconfig` to enable/disable them.
* Messages for package sys-apps/baselayout-2.7:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package sys-libs/timezone-data-2020d:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package acct-user/man-1:
* Adding user 'man' to your system ...
* - Userid: 13
* - Shell: /sbin/nologin
* - Home: /dev/null
* - Groups: man
* - GECOS: added by portage for man
* Updating comment for user 'man' ...
* - Comment: System user; man
* Messages for package media-fonts/stix-fonts-1.1.1:
* The following fontconfig configuration files have been installed:
*
* 61-stix.conf
*
* Use `eselect fontconfig` to enable/disable them.
* Messages for package sys-libs/pam-1.5.1:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-auth/pambase-20201103:
* To amend the existing password policy please see the man 5
* passwdqc.conf page and then edit the /etc/security/passwdqc.conf file
*
* (Note: Above message is only printed the first time package is
* installed. Please look at /usr/share/doc/pambase-20201103/README.gentoo*
* for future reference)
* Messages for package sys-fs/eudev-3.2.9:
*
* For more information on eudev on Gentoo, writing udev rules, and
* fixing known issues visit: https://wiki.gentoo.org/wiki/Eudev
* Messages for package sys-fs/udev-init-scripts-34:
* Adding udev to the sysinit runlevel
* Adding udev-trigger to the sysinit runlevel
* Messages for package sys-apps/coreutils-8.32-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package net-firewall/iptables-1.8.5:
* Current iptables implementation is unset, setting to xtables-legacy-multi
* Messages for package dev-libs/libxml2-2.9.10-r4:
* Skipping XML catalog creation for stage building (bug #208887).
* Messages for package dev-python/jinja-2.11.2-r1:
* For i18n support, please emerge dev-python/Babel.
* Messages for package app-text/po4a-0.57:
* ERROR: app-text/po4a-0.57::gentoo failed (compile phase):
* Compilation failed
*
* Call stack:
* ebuild.sh, line 125: Called src_compile
* environment, line 1173: Called perl-module_src_compile
* environment, line 702: Called die
* The specific snippet of code:
* ./Build build || die "Compilation failed";
*
* If you need support, post the output of `emerge --info '=app-text/po4a-0.57::gentoo'`,
* the complete build log and the output of `emerge -pqv '=app-text/po4a-0.57::gentoo'`.
* The complete build log is located at '/var/tmp/portage/app-text/po4a-0.57/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-text/po4a-0.57/temp/environment'.
* Working directory: '/var/tmp/portage/app-text/po4a-0.57/work/po4a-0.57'
* S: '/var/tmp/portage/app-text/po4a-0.57/work/po4a-0.57'
22 Dec 2020 09:33:27 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
22 Dec 2020 09:33:27 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201220T214503Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201220T214503Z/var/tmp/portage is not a mount point. Skipping
22 Dec 2020 09:33:27 UTC: ERROR : CatalystError: Stage build aborting due to error.
ERROR:catalyst:CatalystError: Stage build aborting due to error.
22 Dec 2020 09:33:27 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1410, in run_local
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1419, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
ERROR:catalyst:Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1410, in run_local
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1419, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
22 Dec 2020 09:33:27 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
22 Dec 2020 09:33:27 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201220T214503Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201220T214503Z/tmp/kerncache is not a mount point. Skipping
22 Dec 2020 09:33:27 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201220T214503Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201220T214503Z/var/cache/binpkgs is not a mount point. Skipping
22 Dec 2020 09:33:27 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201220T214503Z/run is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201220T214503Z/run is not a mount point. Skipping
22 Dec 2020 09:33:27 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201220T214503Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201220T214503Z/dev/shm does not exist. Skipping
22 Dec 2020 09:33:27 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201220T214503Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201220T214503Z/dev/pts does not exist. Skipping
22 Dec 2020 09:33:27 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201220T214503Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201220T214503Z/var/tmp/portage is not a mount point. Skipping
22 Dec 2020 09:33:27 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201220T214503Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201220T214503Z/var/cache/distfiles is not a mount point. Skipping
22 Dec 2020 09:33:27 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201220T214503Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201220T214503Z/var/db/repos/gentoo is not a mount point. Skipping
22 Dec 2020 09:33:27 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201220T214503Z/dev is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201220T214503Z/dev is not a mount point. Skipping
22 Dec 2020 09:33:27 UTC: NOTICE : /release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201220T214503Z/proc is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20201220T214503Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
1347.36user 396.10system 27:39.89elapsed 105%CPU (0avgtext+0avgdata 348092maxresident)k
36872inputs+3794400outputs (2major+67172332minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20201220T214503Z.wzR8WF/log/hardened_stage3-selinux-nomultilib.log
^ permalink raw reply [flat|nested] 15+ messages in thread* [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage3-selinux-nomultilib.spec
@ 2017-10-26 3:25 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2017-10-26 3:25 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
>>> Running pre-merge checks for sec-policy/selinux-base-policy-2.20161023-r3
>>> Emerging (1 of 202) app-arch/xz-utils-5.2.3::gentoo
>>> Installing (1 of 202) app-arch/xz-utils-5.2.3::gentoo
>>> Emerging (2 of 202) virtual/libintl-0-r2::gentoo
>>> Installing (2 of 202) virtual/libintl-0-r2::gentoo
>>> Emerging (3 of 202) sys-libs/zlib-1.2.11::gentoo
>>> Installing (3 of 202) sys-libs/zlib-1.2.11::gentoo
>>> Emerging (4 of 202) dev-lang/python-exec-2.4.4::gentoo
>>> Installing (4 of 202) dev-lang/python-exec-2.4.4::gentoo
>>> Emerging (5 of 202) sys-libs/ncurses-6.0-r1::gentoo
>>> Installing (5 of 202) sys-libs/ncurses-6.0-r1::gentoo
>>> Emerging (6 of 202) app-arch/bzip2-1.0.6-r7::gentoo
>>> Installing (6 of 202) app-arch/bzip2-1.0.6-r7::gentoo
>>> Emerging (7 of 202) sys-devel/gnuconfig-20161104::gentoo
>>> Installing (7 of 202) sys-devel/gnuconfig-20161104::gentoo
>>> Emerging (8 of 202) sys-libs/libsepol-2.6::gentoo
>>> Installing (8 of 202) sys-libs/libsepol-2.6::gentoo
>>> Emerging (9 of 202) virtual/libiconv-0-r2::gentoo
>>> Installing (9 of 202) virtual/libiconv-0-r2::gentoo
>>> Emerging binary (10 of 202) sys-libs/gdbm-1.11::gentoo
>>> Installing (10 of 202) sys-libs/gdbm-1.11::gentoo
>>> Emerging (11 of 202) dev-libs/expat-2.2.0-r1::gentoo
>>> Installing (11 of 202) dev-libs/expat-2.2.0-r1::gentoo
>>> Emerging (12 of 202) sys-apps/gentoo-functions-0.10::gentoo
>>> Installing (12 of 202) sys-apps/gentoo-functions-0.10::gentoo
>>> Emerging binary (13 of 202) app-misc/mime-types-9::gentoo
>>> Installing (13 of 202) app-misc/mime-types-9::gentoo
>>> Emerging binary (14 of 202) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (14 of 202) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging (15 of 202) app-arch/gzip-1.8::gentoo
>>> Installing (15 of 202) app-arch/gzip-1.8::gentoo
>>> Emerging (16 of 202) sys-devel/gcc-config-1.7.3::gentoo
>>> Installing (16 of 202) sys-devel/gcc-config-1.7.3::gentoo
>>> Emerging binary (17 of 202) sys-apps/debianutils-4.7::gentoo
>>> Installing (17 of 202) sys-apps/debianutils-4.7::gentoo
>>> Emerging (18 of 202) app-misc/editor-wrapper-4::gentoo
>>> Installing (18 of 202) app-misc/editor-wrapper-4::gentoo
>>> Emerging (19 of 202) net-libs/libmnl-1.0.4::gentoo
>>> Installing (19 of 202) net-libs/libmnl-1.0.4::gentoo
>>> Emerging (20 of 202) dev-libs/ustr-1.0.4-r8::gentoo
>>> Installing (20 of 202) dev-libs/ustr-1.0.4-r8::gentoo
>>> Emerging (21 of 202) app-text/manpager-1::gentoo
>>> Installing (21 of 202) app-text/manpager-1::gentoo
>>> Emerging (22 of 202) dev-libs/libffi-3.2.1::gentoo
>>> Installing (22 of 202) dev-libs/libffi-3.2.1::gentoo
>>> Emerging (23 of 202) sys-apps/install-xattr-0.5::gentoo
>>> Installing (23 of 202) sys-apps/install-xattr-0.5::gentoo
>>> Emerging (24 of 202) sys-apps/which-2.21::gentoo
>>> Installing (24 of 202) sys-apps/which-2.21::gentoo
>>> Emerging (25 of 202) sys-apps/baselayout-2.3::gentoo
>>> Installing (25 of 202) sys-apps/baselayout-2.3::gentoo
>>> Emerging (26 of 202) sys-devel/automake-wrapper-10::gentoo
>>> Installing (26 of 202) sys-devel/automake-wrapper-10::gentoo
>>> Emerging (27 of 202) app-text/sgml-common-0.6.3-r5::gentoo
>>> Installing (27 of 202) app-text/sgml-common-0.6.3-r5::gentoo
>>> Emerging (28 of 202) sys-devel/autoconf-wrapper-13::gentoo
>>> Installing (28 of 202) sys-devel/autoconf-wrapper-13::gentoo
>>> Emerging (29 of 202) dev-util/gperf-3.0.4::gentoo
>>> Installing (29 of 202) dev-util/gperf-3.0.4::gentoo
>>> Emerging (30 of 202) virtual/libffi-3.0.13-r1::gentoo
>>> Installing (30 of 202) virtual/libffi-3.0.13-r1::gentoo
>>> Emerging (31 of 202) sys-apps/file-5.29::gentoo
>>> Installing (31 of 202) sys-apps/file-5.29::gentoo
>>> Emerging (32 of 202) sys-libs/cracklib-2.9.6-r1::gentoo
>>> Installing (32 of 202) sys-libs/cracklib-2.9.6-r1::gentoo
>>> Emerging (33 of 202) sys-libs/timezone-data-2016h::gentoo
>>> Installing (33 of 202) sys-libs/timezone-data-2016h::gentoo
>>> Emerging binary (34 of 202) app-misc/ca-certificates-20161102.3.27.2-r2::gentoo
>>> Installing (34 of 202) app-misc/ca-certificates-20161102.3.27.2-r2::gentoo
>>> Emerging (35 of 202) sys-devel/binutils-config-5-r3::gentoo
>>> Installing (35 of 202) sys-devel/binutils-config-5-r3::gentoo
>>> Emerging (36 of 202) sys-devel/m4-1.4.17::gentoo
>>> Installing (36 of 202) sys-devel/m4-1.4.17::gentoo
>>> Emerging (37 of 202) dev-libs/libltdl-2.4.6::gentoo
>>> Installing (37 of 202) dev-libs/libltdl-2.4.6::gentoo
>>> Emerging (38 of 202) app-arch/unzip-6.0_p20::gentoo
>>> Installing (38 of 202) app-arch/unzip-6.0_p20::gentoo
>>> Emerging binary (39 of 202) dev-libs/openssl-1.0.2k::gentoo
>>> Installing (39 of 202) dev-libs/openssl-1.0.2k::gentoo
>>> Emerging (40 of 202) dev-libs/gmp-6.1.0::gentoo
>>> Installing (40 of 202) dev-libs/gmp-6.1.0::gentoo
>>> Emerging (41 of 202) dev-libs/mpfr-3.1.3_p4::gentoo
>>> Installing (41 of 202) dev-libs/mpfr-3.1.3_p4::gentoo
>>> Emerging (42 of 202) dev-libs/mpc-1.0.2-r1::gentoo
>>> Installing (42 of 202) dev-libs/mpc-1.0.2-r1::gentoo
>>> Emerging binary (43 of 202) dev-lang/python-2.7.12::gentoo
>>> Installing (43 of 202) dev-lang/python-2.7.12::gentoo
>>> Emerging binary (44 of 202) dev-lang/python-3.4.5::gentoo
>>> Installing (44 of 202) dev-lang/python-3.4.5::gentoo
>>> Emerging (45 of 202) dev-python/setuptools-30.4.0::gentoo
>>> Installing (45 of 202) dev-python/setuptools-30.4.0::gentoo
>>> Emerging (46 of 202) dev-python/certifi-2016.9.26::gentoo
>>> Installing (46 of 202) dev-python/certifi-2016.9.26::gentoo
>>> Emerging (47 of 202) dev-python/ipy-0.83::gentoo
>>> Installing (47 of 202) dev-python/ipy-0.83::gentoo
>>> Emerging (48 of 202) dev-python/decorator-4.0.10::gentoo
>>> Installing (48 of 202) dev-python/decorator-4.0.10::gentoo
>>> Emerging (49 of 202) dev-python/networkx-1.10-r1::gentoo
>>> Installing (49 of 202) dev-python/networkx-1.10-r1::gentoo
>>> Emerging (50 of 202) virtual/os-headers-0::gentoo
>>> Installing (50 of 202) virtual/os-headers-0::gentoo
>>> Emerging (51 of 202) net-misc/iputils-20151218::gentoo
>>> Installing (51 of 202) net-misc/iputils-20151218::gentoo
>>> Emerging binary (52 of 202) sys-apps/portage-2.3.3::gentoo
>>> Installing (52 of 202) sys-apps/portage-2.3.3::gentoo
>>> Emerging (53 of 202) virtual/package-manager-0::gentoo
>>> Installing (53 of 202) virtual/package-manager-0::gentoo
>>> Emerging (54 of 202) virtual/shadow-0::gentoo
>>> Installing (54 of 202) virtual/shadow-0::gentoo
>>> Emerging (55 of 202) virtual/pkgconfig-0-r1::gentoo
>>> Installing (55 of 202) virtual/pkgconfig-0-r1::gentoo
>>> Emerging (56 of 202) sys-libs/readline-6.3_p8-r3::gentoo
>>> Installing (56 of 202) sys-libs/readline-6.3_p8-r3::gentoo
>>> Emerging (57 of 202) sys-apps/kmod-23::gentoo
>>> Installing (57 of 202) sys-apps/kmod-23::gentoo
>>> Emerging (58 of 202) net-firewall/iptables-1.4.21-r1::gentoo
>>> Installing (58 of 202) net-firewall/iptables-1.4.21-r1::gentoo
>>> Emerging (59 of 202) dev-libs/libpipeline-1.4.0::gentoo
>>> Installing (59 of 202) dev-libs/libpipeline-1.4.0::gentoo
>>> Emerging (60 of 202) dev-libs/libpcre-8.39::gentoo
>>> Installing (60 of 202) dev-libs/libpcre-8.39::gentoo
>>> Emerging (61 of 202) virtual/modutils-0::gentoo
>>> Installing (61 of 202) virtual/modutils-0::gentoo
>>> Emerging (62 of 202) sys-apps/less-487::gentoo
>>> Installing (62 of 202) sys-apps/less-487::gentoo
>>> Emerging (63 of 202) dev-lang/swig-3.0.8::gentoo
>>> Installing (63 of 202) dev-lang/swig-3.0.8::gentoo
>>> Emerging (64 of 202) sys-libs/libselinux-2.6::gentoo
>>> Installing (64 of 202) sys-libs/libselinux-2.6::gentoo
>>> Emerging (65 of 202) virtual/pager-0::gentoo
>>> Installing (65 of 202) virtual/pager-0::gentoo
>>> Emerging (66 of 202) sys-apps/net-tools-1.60_p20160215155418::gentoo
>>> Installing (66 of 202) sys-apps/net-tools-1.60_p20160215155418::gentoo
>>> Emerging (67 of 202) sys-process/procps-3.3.12::gentoo
>>> Installing (67 of 202) sys-process/procps-3.3.12::gentoo
>>> Emerging (68 of 202) virtual/perl-ExtUtils-MakeMaker-7.40.200_rc::gentoo
>>> Installing (68 of 202) virtual/perl-ExtUtils-MakeMaker-7.40.200_rc::gentoo
>>> Emerging (69 of 202) virtual/perl-Test-Harness-3.350.100_rc::gentoo
>>> Installing (69 of 202) virtual/perl-Test-Harness-3.350.100_rc::gentoo
>>> Emerging (70 of 202) virtual/perl-File-Spec-3.560.200_rc::gentoo
>>> Installing (70 of 202) virtual/perl-File-Spec-3.560.200_rc::gentoo
>>> Emerging (71 of 202) virtual/perl-Data-Dumper-2.158.0-r1::gentoo
>>> Installing (71 of 202) virtual/perl-Data-Dumper-2.158.0-r1::gentoo
>>> Emerging (72 of 202) virtual/perl-Parse-CPAN-Meta-1.441.400.100_rc::gentoo
>>> Installing (72 of 202) virtual/perl-Parse-CPAN-Meta-1.441.400.100_rc::gentoo
>>> Emerging (73 of 202) virtual/perl-CPAN-Meta-YAML-0.12.0-r3::gentoo
>>> Installing (73 of 202) virtual/perl-CPAN-Meta-YAML-0.12.0-r3::gentoo
>>> Emerging (74 of 202) virtual/perl-File-Temp-0.230.400-r5::gentoo
>>> Installing (74 of 202) virtual/perl-File-Temp-0.230.400-r5::gentoo
>>> Emerging (75 of 202) virtual/yacc-0::gentoo
>>> Installing (75 of 202) virtual/yacc-0::gentoo
>>> Emerging (76 of 202) app-shells/bash-4.3_p48-r1::gentoo
>>> Installing (76 of 202) app-shells/bash-4.3_p48-r1::gentoo
>>> Emerging (77 of 202) app-admin/perl-cleaner-2.20::gentoo
>>> Installing (77 of 202) app-admin/perl-cleaner-2.20::gentoo
>>> Emerging (78 of 202) virtual/perl-Text-ParseWords-3.300.0-r2::gentoo
>>> Installing (78 of 202) virtual/perl-Text-ParseWords-3.300.0-r2::gentoo
>>> Emerging (79 of 202) virtual/perl-Perl-OSType-1.8.0-r1::gentoo
>>> Installing (79 of 202) virtual/perl-Perl-OSType-1.8.0-r1::gentoo
>>> Emerging (80 of 202) virtual/perl-Module-Metadata-1.0.26-r1::gentoo
>>> Installing (80 of 202) virtual/perl-Module-Metadata-1.0.26-r1::gentoo
>>> Emerging (81 of 202) virtual/perl-Getopt-Long-2.450.0-r1::gentoo
>>> Installing (81 of 202) virtual/perl-Getopt-Long-2.450.0-r1::gentoo
>>> Emerging (82 of 202) virtual/perl-ExtUtils-ParseXS-3.280.0-r1::gentoo
>>> Installing (82 of 202) virtual/perl-ExtUtils-ParseXS-3.280.0-r1::gentoo
>>> Emerging (83 of 202) virtual/perl-ExtUtils-Manifest-1.700.0-r3::gentoo
>>> Installing (83 of 202) virtual/perl-ExtUtils-Manifest-1.700.0-r3::gentoo
>>> Emerging (84 of 202) virtual/perl-ExtUtils-Install-2.40.0-r2::gentoo
>>> Installing (84 of 202) virtual/perl-ExtUtils-Install-2.40.0-r2::gentoo
>>> Emerging (85 of 202) virtual/perl-ExtUtils-CBuilder-0.280.221-r1::gentoo
>>> Installing (85 of 202) virtual/perl-ExtUtils-CBuilder-0.280.221-r1::gentoo
>>> Emerging (86 of 202) virtual/perl-JSON-PP-2.273.0.100_rc-r1::gentoo
>>> Installing (86 of 202) virtual/perl-JSON-PP-2.273.0.100_rc-r1::gentoo
>>> Emerging (87 of 202) virtual/perl-CPAN-Meta-2.150.1-r1::gentoo
>>> Installing (87 of 202) virtual/perl-CPAN-Meta-2.150.1-r1::gentoo
>>> Emerging (88 of 202) virtual/perl-version-0.990.900-r4::gentoo
>>> Installing (88 of 202) virtual/perl-version-0.990.900-r4::gentoo
>>> Emerging (89 of 202) sys-apps/attr-2.4.47-r2::gentoo
>>> Installing (89 of 202) sys-apps/attr-2.4.47-r2::gentoo
>>> Emerging (90 of 202) dev-python/pyxattr-0.5.5::gentoo
>>> Installing (90 of 202) dev-python/pyxattr-0.5.5::gentoo
>>> Emerging (91 of 202) sys-devel/patch-2.7.5::gentoo
>>> Installing (91 of 202) sys-devel/patch-2.7.5::gentoo
>>> Emerging (92 of 202) sys-kernel/linux-headers-4.4::gentoo
>>> Installing (92 of 202) sys-kernel/linux-headers-4.4::gentoo
>>> Emerging (93 of 202) sys-libs/libseccomp-2.3.0::gentoo
>>> Installing (93 of 202) sys-libs/libseccomp-2.3.0::gentoo
>>> Emerging (94 of 202) sys-apps/busybox-1.25.1::gentoo
>>> Installing (94 of 202) sys-apps/busybox-1.25.1::gentoo
>>> Emerging (95 of 202) app-misc/pax-utils-1.1.7::gentoo
>>> Installing (95 of 202) app-misc/pax-utils-1.1.7::gentoo
>>> Emerging (96 of 202) sys-apps/sandbox-2.10-r3::gentoo
>>> Installing (96 of 202) sys-apps/sandbox-2.10-r3::gentoo
>>> Emerging (97 of 202) sys-apps/checkpolicy-2.6::gentoo
>>> Installing (97 of 202) sys-apps/checkpolicy-2.6::gentoo
>>> Emerging (98 of 202) sys-devel/binutils-2.26.1::gentoo
>>> Installing (98 of 202) sys-devel/binutils-2.26.1::gentoo
>>> Emerging (99 of 202) sys-apps/paxctl-0.9::gentoo
>>> Installing (99 of 202) sys-apps/paxctl-0.9::gentoo
>>> Emerging (100 of 202) sys-libs/glibc-2.23-r3::gentoo
Full build log at /home/release/tmp/run/catalyst-auto.20170313.52lvKj/log/hardened_stage3-selinux-nomultilib.log
^ permalink raw reply [flat|nested] 15+ messages in thread
* [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage3-selinux-nomultilib.spec
@ 2017-10-26 3:25 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2017-10-26 3:25 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
>>> Running pre-merge checks for sec-policy/selinux-base-policy-2.20161023-r3
>>> Emerging (1 of 202) virtual/libintl-0-r2::gentoo
>>> Installing (1 of 202) virtual/libintl-0-r2::gentoo
>>> Emerging (2 of 202) dev-lang/python-exec-2.4.4::gentoo
>>> Installing (2 of 202) dev-lang/python-exec-2.4.4::gentoo
>>> Emerging (3 of 202) sys-libs/ncurses-6.0-r1::gentoo
>>> Installing (3 of 202) sys-libs/ncurses-6.0-r1::gentoo
>>> Emerging (4 of 202) app-arch/bzip2-1.0.6-r7::gentoo
>>> Installing (4 of 202) app-arch/bzip2-1.0.6-r7::gentoo
>>> Emerging (5 of 202) sys-libs/libsepol-2.6::gentoo
>>> Installing (5 of 202) sys-libs/libsepol-2.6::gentoo
>>> Emerging (6 of 202) sys-devel/gnuconfig-20161104::gentoo
>>> Installing (6 of 202) sys-devel/gnuconfig-20161104::gentoo
>>> Emerging (7 of 202) virtual/libiconv-0-r2::gentoo
>>> Installing (7 of 202) virtual/libiconv-0-r2::gentoo
>>> Emerging binary (8 of 202) sys-libs/gdbm-1.11::gentoo
>>> Installing (8 of 202) sys-libs/gdbm-1.11::gentoo
>>> Emerging (9 of 202) sys-apps/gentoo-functions-0.10::gentoo
>>> Installing (9 of 202) sys-apps/gentoo-functions-0.10::gentoo
>>> Emerging binary (10 of 202) app-misc/mime-types-9::gentoo
>>> Installing (10 of 202) app-misc/mime-types-9::gentoo
>>> Emerging binary (11 of 202) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (11 of 202) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging (12 of 202) app-arch/gzip-1.8::gentoo
>>> Installing (12 of 202) app-arch/gzip-1.8::gentoo
>>> Emerging (13 of 202) sys-devel/gcc-config-1.7.3::gentoo
>>> Installing (13 of 202) sys-devel/gcc-config-1.7.3::gentoo
>>> Emerging binary (14 of 202) sys-apps/debianutils-4.7::gentoo
>>> Installing (14 of 202) sys-apps/debianutils-4.7::gentoo
>>> Emerging (15 of 202) app-misc/editor-wrapper-4::gentoo
>>> Installing (15 of 202) app-misc/editor-wrapper-4::gentoo
>>> Emerging (16 of 202) net-libs/libmnl-1.0.4::gentoo
>>> Installing (16 of 202) net-libs/libmnl-1.0.4::gentoo
>>> Emerging (17 of 202) dev-libs/ustr-1.0.4-r8::gentoo
>>> Installing (17 of 202) dev-libs/ustr-1.0.4-r8::gentoo
>>> Emerging (18 of 202) app-text/manpager-1::gentoo
>>> Installing (18 of 202) app-text/manpager-1::gentoo
>>> Emerging (19 of 202) sys-apps/install-xattr-0.5::gentoo
>>> Installing (19 of 202) sys-apps/install-xattr-0.5::gentoo
>>> Emerging (20 of 202) sys-apps/which-2.21::gentoo
>>> Installing (20 of 202) sys-apps/which-2.21::gentoo
>>> Emerging (21 of 202) sys-apps/baselayout-2.3::gentoo
>>> Installing (21 of 202) sys-apps/baselayout-2.3::gentoo
>>> Emerging (22 of 202) app-text/sgml-common-0.6.3-r5::gentoo
>>> Installing (22 of 202) app-text/sgml-common-0.6.3-r5::gentoo
>>> Emerging (23 of 202) sys-devel/autoconf-wrapper-13::gentoo
>>> Installing (23 of 202) sys-devel/autoconf-wrapper-13::gentoo
>>> Emerging (24 of 202) sys-devel/automake-wrapper-10::gentoo
>>> Installing (24 of 202) sys-devel/automake-wrapper-10::gentoo
>>> Emerging (25 of 202) dev-util/gperf-3.0.4::gentoo
>>> Installing (25 of 202) dev-util/gperf-3.0.4::gentoo
>>> Emerging (26 of 202) sys-libs/timezone-data-2017a::gentoo
>>> Installing (26 of 202) sys-libs/timezone-data-2017a::gentoo
>>> Emerging binary (27 of 202) app-misc/ca-certificates-20161102.3.27.2-r2::gentoo
>>> Installing (27 of 202) app-misc/ca-certificates-20161102.3.27.2-r2::gentoo
>>> Emerging (28 of 202) sys-devel/binutils-config-5-r3::gentoo
>>> Installing (28 of 202) sys-devel/binutils-config-5-r3::gentoo
>>> Emerging (29 of 202) app-arch/unzip-6.0_p20::gentoo
>>> Installing (29 of 202) app-arch/unzip-6.0_p20::gentoo
>>> Emerging binary (30 of 202) dev-lang/python-2.7.12::gentoo
>>> Installing (30 of 202) dev-lang/python-2.7.12::gentoo
>>> Emerging binary (31 of 202) dev-lang/python-3.4.5::gentoo
>>> Installing (31 of 202) dev-lang/python-3.4.5::gentoo
>>> Emerging (32 of 202) dev-python/setuptools-30.4.0::gentoo
>>> Installing (32 of 202) dev-python/setuptools-30.4.0::gentoo
>>> Emerging (33 of 202) dev-python/certifi-2016.9.26::gentoo
>>> Installing (33 of 202) dev-python/certifi-2016.9.26::gentoo
>>> Emerging (34 of 202) dev-python/ipy-0.83::gentoo
>>> Installing (34 of 202) dev-python/ipy-0.83::gentoo
>>> Emerging (35 of 202) dev-python/decorator-4.0.10::gentoo
>>> Installing (35 of 202) dev-python/decorator-4.0.10::gentoo
>>> Emerging (36 of 202) dev-python/networkx-1.10-r1::gentoo
>>> Installing (36 of 202) dev-python/networkx-1.10-r1::gentoo
>>> Emerging (37 of 202) virtual/os-headers-0::gentoo
>>> Installing (37 of 202) virtual/os-headers-0::gentoo
>>> Emerging binary (38 of 202) dev-libs/openssl-1.0.2k::gentoo
>>> Installing (38 of 202) dev-libs/openssl-1.0.2k::gentoo
>>> Emerging (39 of 202) net-misc/iputils-20151218::gentoo
>>> Installing (39 of 202) net-misc/iputils-20151218::gentoo
>>> Emerging (40 of 202) virtual/libffi-3.0.13-r1::gentoo
>>> Installing (40 of 202) virtual/libffi-3.0.13-r1::gentoo
>>> Emerging binary (41 of 202) sys-apps/portage-2.3.3::gentoo
>>> Installing (41 of 202) sys-apps/portage-2.3.3::gentoo
>>> Emerging (42 of 202) virtual/package-manager-0::gentoo
>>> Installing (42 of 202) virtual/package-manager-0::gentoo
>>> Emerging (43 of 202) virtual/shadow-0::gentoo
>>> Installing (43 of 202) virtual/shadow-0::gentoo
>>> Emerging (44 of 202) virtual/pkgconfig-0-r1::gentoo
>>> Installing (44 of 202) virtual/pkgconfig-0-r1::gentoo
>>> Emerging (45 of 202) sys-libs/readline-6.3_p8-r3::gentoo
>>> Installing (45 of 202) sys-libs/readline-6.3_p8-r3::gentoo
>>> Emerging (46 of 202) virtual/perl-ExtUtils-MakeMaker-7.40.200_rc::gentoo
>>> Installing (46 of 202) virtual/perl-ExtUtils-MakeMaker-7.40.200_rc::gentoo
>>> Emerging (47 of 202) virtual/perl-Test-Harness-3.350.100_rc::gentoo
>>> Installing (47 of 202) virtual/perl-Test-Harness-3.350.100_rc::gentoo
>>> Emerging (48 of 202) virtual/perl-File-Spec-3.560.200_rc::gentoo
>>> Installing (48 of 202) virtual/perl-File-Spec-3.560.200_rc::gentoo
>>> Emerging (49 of 202) virtual/perl-Data-Dumper-2.158.0-r1::gentoo
>>> Installing (49 of 202) virtual/perl-Data-Dumper-2.158.0-r1::gentoo
>>> Emerging (50 of 202) virtual/perl-Parse-CPAN-Meta-1.441.400.100_rc::gentoo
>>> Installing (50 of 202) virtual/perl-Parse-CPAN-Meta-1.441.400.100_rc::gentoo
>>> Emerging (51 of 202) virtual/perl-CPAN-Meta-YAML-0.12.0-r3::gentoo
>>> Installing (51 of 202) virtual/perl-CPAN-Meta-YAML-0.12.0-r3::gentoo
>>> Emerging (52 of 202) virtual/perl-File-Temp-0.230.400-r5::gentoo
>>> Installing (52 of 202) virtual/perl-File-Temp-0.230.400-r5::gentoo
>>> Emerging (53 of 202) virtual/yacc-0::gentoo
>>> Installing (53 of 202) virtual/yacc-0::gentoo
>>> Emerging (54 of 202) app-shells/bash-4.3_p48-r1::gentoo
>>> Installing (54 of 202) app-shells/bash-4.3_p48-r1::gentoo
>>> Emerging (55 of 202) app-admin/perl-cleaner-2.20::gentoo
>>> Installing (55 of 202) app-admin/perl-cleaner-2.20::gentoo
>>> Emerging (56 of 202) virtual/perl-Text-ParseWords-3.300.0-r2::gentoo
>>> Installing (56 of 202) virtual/perl-Text-ParseWords-3.300.0-r2::gentoo
>>> Emerging (57 of 202) virtual/perl-Perl-OSType-1.8.0-r1::gentoo
>>> Installing (57 of 202) virtual/perl-Perl-OSType-1.8.0-r1::gentoo
>>> Emerging (58 of 202) virtual/perl-Module-Metadata-1.0.26-r1::gentoo
>>> Installing (58 of 202) virtual/perl-Module-Metadata-1.0.26-r1::gentoo
>>> Emerging (59 of 202) virtual/perl-Getopt-Long-2.450.0-r1::gentoo
>>> Installing (59 of 202) virtual/perl-Getopt-Long-2.450.0-r1::gentoo
>>> Emerging (60 of 202) virtual/perl-ExtUtils-ParseXS-3.280.0-r1::gentoo
>>> Installing (60 of 202) virtual/perl-ExtUtils-ParseXS-3.280.0-r1::gentoo
>>> Emerging (61 of 202) virtual/perl-ExtUtils-Manifest-1.700.0-r3::gentoo
>>> Installing (61 of 202) virtual/perl-ExtUtils-Manifest-1.700.0-r3::gentoo
>>> Emerging (62 of 202) virtual/perl-ExtUtils-Install-2.40.0-r2::gentoo
>>> Installing (62 of 202) virtual/perl-ExtUtils-Install-2.40.0-r2::gentoo
>>> Emerging (63 of 202) virtual/perl-ExtUtils-CBuilder-0.280.221-r1::gentoo
>>> Installing (63 of 202) virtual/perl-ExtUtils-CBuilder-0.280.221-r1::gentoo
>>> Emerging (64 of 202) virtual/perl-JSON-PP-2.273.0.100_rc-r1::gentoo
>>> Installing (64 of 202) virtual/perl-JSON-PP-2.273.0.100_rc-r1::gentoo
>>> Emerging (65 of 202) virtual/perl-CPAN-Meta-2.150.1-r1::gentoo
>>> Installing (65 of 202) virtual/perl-CPAN-Meta-2.150.1-r1::gentoo
>>> Emerging (66 of 202) virtual/perl-version-0.990.900-r4::gentoo
>>> Installing (66 of 202) virtual/perl-version-0.990.900-r4::gentoo
>>> Emerging (67 of 202) app-arch/xz-utils-5.2.3::gentoo
>>> Installing (67 of 202) app-arch/xz-utils-5.2.3::gentoo
>>> Emerging (68 of 202) app-portage/elt-patches-20170317::gentoo
>>> Installing (68 of 202) app-portage/elt-patches-20170317::gentoo
>>> Emerging (69 of 202) sys-devel/m4-1.4.17::gentoo
>>> Installing (69 of 202) sys-devel/m4-1.4.17::gentoo
>>> Emerging (70 of 202) dev-libs/libltdl-2.4.6::gentoo
>>> Installing (70 of 202) dev-libs/libltdl-2.4.6::gentoo
>>> Emerging (71 of 202) sys-libs/zlib-1.2.11::gentoo
>>> Installing (71 of 202) sys-libs/zlib-1.2.11::gentoo
>>> Emerging (72 of 202) dev-libs/expat-2.2.0-r1::gentoo
>>> Installing (72 of 202) dev-libs/expat-2.2.0-r1::gentoo
>>> Emerging (73 of 202) dev-libs/gmp-6.1.0::gentoo
>>> Installing (73 of 202) dev-libs/gmp-6.1.0::gentoo
>>> Emerging (74 of 202) net-firewall/iptables-1.4.21-r1::gentoo
>>> Installing (74 of 202) net-firewall/iptables-1.4.21-r1::gentoo
>>> Emerging (75 of 202) dev-libs/libpipeline-1.4.0::gentoo
>>> Installing (75 of 202) dev-libs/libpipeline-1.4.0::gentoo
>>> Emerging (76 of 202) dev-libs/libffi-3.2.1::gentoo
>>> Installing (76 of 202) dev-libs/libffi-3.2.1::gentoo
>>> Emerging (77 of 202) dev-libs/libpcre-8.40-r1::gentoo
>>> Installing (77 of 202) dev-libs/libpcre-8.40-r1::gentoo
>>> Emerging (78 of 202) sys-apps/file-5.29::gentoo
>>> Installing (78 of 202) sys-apps/file-5.29::gentoo
>>> Emerging (79 of 202) dev-libs/mpfr-3.1.3_p4::gentoo
>>> Installing (79 of 202) dev-libs/mpfr-3.1.3_p4::gentoo
>>> Emerging (80 of 202) sys-libs/cracklib-2.9.6-r1::gentoo
>>> Installing (80 of 202) sys-libs/cracklib-2.9.6-r1::gentoo
>>> Emerging (81 of 202) sys-apps/kmod-23::gentoo
>>> Installing (81 of 202) sys-apps/kmod-23::gentoo
>>> Emerging (82 of 202) sys-apps/less-487::gentoo
>>> Installing (82 of 202) sys-apps/less-487::gentoo
>>> Emerging (83 of 202) dev-libs/mpc-1.0.2-r1::gentoo
>>> Installing (83 of 202) dev-libs/mpc-1.0.2-r1::gentoo
>>> Emerging (84 of 202) virtual/modutils-0::gentoo
>>> Installing (84 of 202) virtual/modutils-0::gentoo
>>> Emerging (85 of 202) dev-lang/swig-3.0.8::gentoo
>>> Installing (85 of 202) dev-lang/swig-3.0.8::gentoo
>>> Emerging (86 of 202) sys-libs/libselinux-2.6::gentoo
>>> Installing (86 of 202) sys-libs/libselinux-2.6::gentoo
>>> Emerging (87 of 202) virtual/pager-0::gentoo
>>> Installing (87 of 202) virtual/pager-0::gentoo
>>> Emerging (88 of 202) sys-apps/net-tools-1.60_p20160215155418::gentoo
>>> Installing (88 of 202) sys-apps/net-tools-1.60_p20160215155418::gentoo
>>> Emerging (89 of 202) sys-process/procps-3.3.12::gentoo
>>> Installing (89 of 202) sys-process/procps-3.3.12::gentoo
>>> Emerging (90 of 202) sys-apps/attr-2.4.47-r2::gentoo
>>> Installing (90 of 202) sys-apps/attr-2.4.47-r2::gentoo
>>> Emerging (91 of 202) dev-python/pyxattr-0.5.5::gentoo
>>> Installing (91 of 202) dev-python/pyxattr-0.5.5::gentoo
>>> Emerging (92 of 202) sys-devel/patch-2.7.5::gentoo
>>> Installing (92 of 202) sys-devel/patch-2.7.5::gentoo
>>> Emerging (93 of 202) sys-kernel/linux-headers-4.4::gentoo
>>> Installing (93 of 202) sys-kernel/linux-headers-4.4::gentoo
>>> Emerging (94 of 202) sys-libs/libseccomp-2.3.0::gentoo
>>> Installing (94 of 202) sys-libs/libseccomp-2.3.0::gentoo
>>> Emerging (95 of 202) sys-apps/busybox-1.25.1::gentoo
>>> Installing (95 of 202) sys-apps/busybox-1.25.1::gentoo
>>> Emerging (96 of 202) app-misc/pax-utils-1.1.7::gentoo
>>> Installing (96 of 202) app-misc/pax-utils-1.1.7::gentoo
>>> Emerging (97 of 202) sys-apps/sandbox-2.10-r3::gentoo
>>> Installing (97 of 202) sys-apps/sandbox-2.10-r3::gentoo
>>> Emerging (98 of 202) sys-apps/checkpolicy-2.6::gentoo
>>> Installing (98 of 202) sys-apps/checkpolicy-2.6::gentoo
>>> Emerging (99 of 202) sys-devel/binutils-2.26.1::gentoo
Full build log at /home/release/tmp/run/catalyst-auto.20170403.C8D52O/log/hardened_stage3-selinux-nomultilib.log
^ permalink raw reply [flat|nested] 15+ messages in thread
* [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage3-selinux-nomultilib.spec
@ 2017-03-04 14:52 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2017-03-04 14:52 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
* Messages for package sys-apps/portage-2.3.3:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
emerge --quiet --usepkg --buildpkg --newuse -e @system
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-devel/gcc-4.9.4
>>> Running pre-merge checks for sys-libs/pam-1.2.1
>>> Running pre-merge checks for net-misc/openssh-7.3_p1-r7
>>> Running pre-merge checks for sys-fs/eudev-3.1.5
*
* As of 2013-01-29, eudev-3.1.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
>>> Running pre-merge checks for sec-policy/selinux-base-policy-2.20161023-r3
>>> Emerging (1 of 202) app-arch/xz-utils-5.2.3::gentoo
>>> Installing (1 of 202) app-arch/xz-utils-5.2.3::gentoo
>>> Emerging (2 of 202) virtual/libintl-0-r2::gentoo
>>> Installing (2 of 202) virtual/libintl-0-r2::gentoo
>>> Emerging (3 of 202) sys-libs/zlib-1.2.11::gentoo
>>> Installing (3 of 202) sys-libs/zlib-1.2.11::gentoo
>>> Emerging (4 of 202) dev-lang/python-exec-2.4.4::gentoo
>>> Installing (4 of 202) dev-lang/python-exec-2.4.4::gentoo
>>> Emerging (5 of 202) sys-libs/ncurses-6.0-r1::gentoo
>>> Installing (5 of 202) sys-libs/ncurses-6.0-r1::gentoo
>>> Emerging (6 of 202) app-arch/bzip2-1.0.6-r7::gentoo
>>> Installing (6 of 202) app-arch/bzip2-1.0.6-r7::gentoo
>>> Emerging (7 of 202) sys-devel/gnuconfig-20161104::gentoo
>>> Installing (7 of 202) sys-devel/gnuconfig-20161104::gentoo
>>> Emerging (8 of 202) sys-libs/libsepol-2.6::gentoo
>>> Installing (8 of 202) sys-libs/libsepol-2.6::gentoo
>>> Emerging (9 of 202) virtual/libiconv-0-r2::gentoo
>>> Installing (9 of 202) virtual/libiconv-0-r2::gentoo
>>> Emerging (10 of 202) sys-libs/gdbm-1.11::gentoo
>>> Installing (10 of 202) sys-libs/gdbm-1.11::gentoo
>>> Emerging (11 of 202) dev-libs/expat-2.2.0-r1::gentoo
>>> Installing (11 of 202) dev-libs/expat-2.2.0-r1::gentoo
>>> Emerging (12 of 202) sys-apps/gentoo-functions-0.10::gentoo
>>> Installing (12 of 202) sys-apps/gentoo-functions-0.10::gentoo
>>> Emerging (13 of 202) app-misc/mime-types-9::gentoo
>>> Installing (13 of 202) app-misc/mime-types-9::gentoo
>>> Emerging (14 of 202) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (14 of 202) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging (15 of 202) app-arch/gzip-1.8::gentoo
>>> Installing (15 of 202) app-arch/gzip-1.8::gentoo
>>> Emerging (16 of 202) sys-devel/gcc-config-1.7.3::gentoo
>>> Installing (16 of 202) sys-devel/gcc-config-1.7.3::gentoo
>>> Emerging (17 of 202) sys-apps/debianutils-4.7::gentoo
>>> Installing (17 of 202) sys-apps/debianutils-4.7::gentoo
>>> Emerging (18 of 202) app-misc/editor-wrapper-4::gentoo
>>> Installing (18 of 202) app-misc/editor-wrapper-4::gentoo
>>> Emerging (19 of 202) net-libs/libmnl-1.0.4::gentoo
>>> Installing (19 of 202) net-libs/libmnl-1.0.4::gentoo
>>> Emerging (20 of 202) dev-libs/ustr-1.0.4-r8::gentoo
>>> Installing (20 of 202) dev-libs/ustr-1.0.4-r8::gentoo
>>> Emerging (21 of 202) app-text/manpager-1::gentoo
>>> Installing (21 of 202) app-text/manpager-1::gentoo
>>> Emerging (22 of 202) dev-libs/libffi-3.2.1::gentoo
>>> Installing (22 of 202) dev-libs/libffi-3.2.1::gentoo
>>> Emerging (23 of 202) sys-apps/install-xattr-0.5::gentoo
>>> Installing (23 of 202) sys-apps/install-xattr-0.5::gentoo
>>> Emerging (24 of 202) sys-apps/which-2.21::gentoo
>>> Installing (24 of 202) sys-apps/which-2.21::gentoo
>>> Emerging (25 of 202) sys-apps/baselayout-2.3::gentoo
>>> Installing (25 of 202) sys-apps/baselayout-2.3::gentoo
>>> Emerging (26 of 202) sys-devel/automake-wrapper-10::gentoo
>>> Installing (26 of 202) sys-devel/automake-wrapper-10::gentoo
>>> Emerging (27 of 202) app-text/sgml-common-0.6.3-r5::gentoo
>>> Installing (27 of 202) app-text/sgml-common-0.6.3-r5::gentoo
>>> Emerging (28 of 202) sys-devel/autoconf-wrapper-13::gentoo
>>> Installing (28 of 202) sys-devel/autoconf-wrapper-13::gentoo
>>> Emerging (29 of 202) dev-util/gperf-3.0.4::gentoo
>>> Installing (29 of 202) dev-util/gperf-3.0.4::gentoo
>>> Emerging (30 of 202) virtual/libffi-3.0.13-r1::gentoo
>>> Installing (30 of 202) virtual/libffi-3.0.13-r1::gentoo
>>> Emerging (31 of 202) sys-apps/file-5.29::gentoo
>>> Installing (31 of 202) sys-apps/file-5.29::gentoo
>>> Emerging (32 of 202) sys-libs/cracklib-2.9.6-r1::gentoo
>>> Installing (32 of 202) sys-libs/cracklib-2.9.6-r1::gentoo
>>> Emerging (33 of 202) sys-libs/timezone-data-2016h::gentoo
>>> Installing (33 of 202) sys-libs/timezone-data-2016h::gentoo
>>> Emerging (34 of 202) sys-devel/binutils-config-5-r2::gentoo
>>> Installing (34 of 202) sys-devel/binutils-config-5-r2::gentoo
>>> Emerging (35 of 202) sys-devel/m4-1.4.17::gentoo
>>> Installing (35 of 202) sys-devel/m4-1.4.17::gentoo
>>> Emerging (36 of 202) dev-libs/libltdl-2.4.6::gentoo
>>> Installing (36 of 202) dev-libs/libltdl-2.4.6::gentoo
>>> Emerging (37 of 202) app-arch/unzip-6.0_p20::gentoo
>>> Installing (37 of 202) app-arch/unzip-6.0_p20::gentoo
>>> Emerging (38 of 202) dev-libs/gmp-6.1.0::gentoo
>>> Installing (38 of 202) dev-libs/gmp-6.1.0::gentoo
>>> Emerging (39 of 202) dev-libs/mpfr-3.1.3_p4::gentoo
>>> Installing (39 of 202) dev-libs/mpfr-3.1.3_p4::gentoo
>>> Emerging (40 of 202) dev-libs/mpc-1.0.2-r1::gentoo
>>> Installing (40 of 202) dev-libs/mpc-1.0.2-r1::gentoo
>>> Emerging (41 of 202) virtual/os-headers-0::gentoo
>>> Installing (41 of 202) virtual/os-headers-0::gentoo
>>> Emerging (42 of 202) virtual/pam-0-r1::gentoo
>>> Installing (42 of 202) virtual/pam-0-r1::gentoo
>>> Emerging (43 of 202) virtual/acl-0-r2::gentoo
>>> Installing (43 of 202) virtual/acl-0-r2::gentoo
>>> Emerging (44 of 202) app-eselect/eselect-python-20160516::gentoo
>>> Installing (44 of 202) app-eselect/eselect-python-20160516::gentoo
>>> Emerging binary (45 of 202) sys-apps/portage-2.3.3::gentoo
>>> Installing (45 of 202) sys-apps/portage-2.3.3::gentoo
>>> Emerging (46 of 202) virtual/package-manager-0::gentoo
>>> Installing (46 of 202) virtual/package-manager-0::gentoo
>>> Emerging (47 of 202) virtual/shadow-0::gentoo
>>> Installing (47 of 202) virtual/shadow-0::gentoo
>>> Emerging (48 of 202) virtual/pkgconfig-0-r1::gentoo
>>> Installing (48 of 202) virtual/pkgconfig-0-r1::gentoo
>>> Emerging (49 of 202) sys-libs/readline-6.3_p8-r3::gentoo
>>> Installing (49 of 202) sys-libs/readline-6.3_p8-r3::gentoo
>>> Emerging (50 of 202) sys-apps/kmod-23::gentoo
>>> Installing (50 of 202) sys-apps/kmod-23::gentoo
>>> Emerging (51 of 202) net-firewall/iptables-1.4.21-r1::gentoo
>>> Installing (51 of 202) net-firewall/iptables-1.4.21-r1::gentoo
>>> Emerging (52 of 202) dev-libs/libpipeline-1.4.0::gentoo
>>> Installing (52 of 202) dev-libs/libpipeline-1.4.0::gentoo
>>> Emerging (53 of 202) dev-libs/libpcre-8.39::gentoo
>>> Installing (53 of 202) dev-libs/libpcre-8.39::gentoo
>>> Emerging (54 of 202) virtual/modutils-0::gentoo
>>> Installing (54 of 202) virtual/modutils-0::gentoo
>>> Emerging (55 of 202) sys-apps/less-487::gentoo
>>> Installing (55 of 202) sys-apps/less-487::gentoo
>>> Emerging (56 of 202) dev-lang/swig-3.0.8::gentoo
>>> Installing (56 of 202) dev-lang/swig-3.0.8::gentoo
>>> Emerging (57 of 202) virtual/pager-0::gentoo
>>> Installing (57 of 202) virtual/pager-0::gentoo
>>> Emerging (58 of 202) virtual/perl-ExtUtils-MakeMaker-7.40.200_rc::gentoo
>>> Installing (58 of 202) virtual/perl-ExtUtils-MakeMaker-7.40.200_rc::gentoo
>>> Emerging (59 of 202) virtual/perl-Test-Harness-3.350.100_rc::gentoo
>>> Installing (59 of 202) virtual/perl-Test-Harness-3.350.100_rc::gentoo
>>> Emerging (60 of 202) virtual/perl-File-Spec-3.560.200_rc::gentoo
>>> Installing (60 of 202) virtual/perl-File-Spec-3.560.200_rc::gentoo
>>> Emerging (61 of 202) virtual/perl-Data-Dumper-2.158.0-r1::gentoo
>>> Installing (61 of 202) virtual/perl-Data-Dumper-2.158.0-r1::gentoo
>>> Emerging (62 of 202) virtual/perl-Parse-CPAN-Meta-1.441.400.100_rc::gentoo
>>> Installing (62 of 202) virtual/perl-Parse-CPAN-Meta-1.441.400.100_rc::gentoo
>>> Emerging (63 of 202) virtual/perl-CPAN-Meta-YAML-0.12.0-r3::gentoo
>>> Installing (63 of 202) virtual/perl-CPAN-Meta-YAML-0.12.0-r3::gentoo
>>> Emerging (64 of 202) virtual/perl-File-Temp-0.230.400-r5::gentoo
>>> Installing (64 of 202) virtual/perl-File-Temp-0.230.400-r5::gentoo
>>> Emerging (65 of 202) virtual/yacc-0::gentoo
>>> Installing (65 of 202) virtual/yacc-0::gentoo
>>> Emerging (66 of 202) app-shells/bash-4.3_p48-r1::gentoo
>>> Installing (66 of 202) app-shells/bash-4.3_p48-r1::gentoo
>>> Emerging (67 of 202) app-admin/perl-cleaner-2.20::gentoo
>>> Installing (67 of 202) app-admin/perl-cleaner-2.20::gentoo
>>> Emerging (68 of 202) virtual/perl-Text-ParseWords-3.300.0-r2::gentoo
>>> Installing (68 of 202) virtual/perl-Text-ParseWords-3.300.0-r2::gentoo
>>> Emerging (69 of 202) virtual/perl-Perl-OSType-1.8.0-r1::gentoo
>>> Installing (69 of 202) virtual/perl-Perl-OSType-1.8.0-r1::gentoo
>>> Emerging (70 of 202) virtual/perl-Module-Metadata-1.0.26-r1::gentoo
>>> Installing (70 of 202) virtual/perl-Module-Metadata-1.0.26-r1::gentoo
>>> Emerging (71 of 202) virtual/perl-Getopt-Long-2.450.0-r1::gentoo
>>> Installing (71 of 202) virtual/perl-Getopt-Long-2.450.0-r1::gentoo
>>> Emerging (72 of 202) virtual/perl-ExtUtils-ParseXS-3.280.0-r1::gentoo
>>> Installing (72 of 202) virtual/perl-ExtUtils-ParseXS-3.280.0-r1::gentoo
>>> Emerging (73 of 202) virtual/perl-ExtUtils-Manifest-1.700.0-r3::gentoo
>>> Installing (73 of 202) virtual/perl-ExtUtils-Manifest-1.700.0-r3::gentoo
>>> Emerging (74 of 202) virtual/perl-ExtUtils-Install-2.40.0-r2::gentoo
>>> Installing (74 of 202) virtual/perl-ExtUtils-Install-2.40.0-r2::gentoo
>>> Emerging (75 of 202) virtual/perl-ExtUtils-CBuilder-0.280.221-r1::gentoo
>>> Installing (75 of 202) virtual/perl-ExtUtils-CBuilder-0.280.221-r1::gentoo
>>> Emerging (76 of 202) virtual/perl-JSON-PP-2.273.0.100_rc-r1::gentoo
>>> Installing (76 of 202) virtual/perl-JSON-PP-2.273.0.100_rc-r1::gentoo
>>> Emerging (77 of 202) virtual/perl-CPAN-Meta-2.150.1-r1::gentoo
>>> Installing (77 of 202) virtual/perl-CPAN-Meta-2.150.1-r1::gentoo
>>> Emerging (78 of 202) virtual/perl-version-0.990.900-r4::gentoo
>>> Installing (78 of 202) virtual/perl-version-0.990.900-r4::gentoo
>>> Emerging (79 of 202) sys-libs/libselinux-2.6::gentoo
>>> Installing (79 of 202) sys-libs/libselinux-2.6::gentoo
>>> Emerging (80 of 202) sys-apps/net-tools-1.60_p20160215155418::gentoo
>>> Installing (80 of 202) sys-apps/net-tools-1.60_p20160215155418::gentoo
>>> Emerging (81 of 202) sys-process/procps-3.3.12::gentoo
>>> Installing (81 of 202) sys-process/procps-3.3.12::gentoo
>>> Emerging (82 of 202) sys-apps/attr-2.4.47-r2::gentoo
>>> Installing (82 of 202) sys-apps/attr-2.4.47-r2::gentoo
>>> Emerging (83 of 202) sys-devel/patch-2.7.5::gentoo
>>> Installing (83 of 202) sys-devel/patch-2.7.5::gentoo
>>> Emerging (84 of 202) sys-kernel/linux-headers-4.4::gentoo
>>> Installing (84 of 202) sys-kernel/linux-headers-4.4::gentoo
>>> Emerging (85 of 202) sys-libs/libseccomp-2.3.0::gentoo
>>> Installing (85 of 202) sys-libs/libseccomp-2.3.0::gentoo
>>> Emerging (86 of 202) sys-libs/libcap-2.24-r2::gentoo
>>> Installing (86 of 202) sys-libs/libcap-2.24-r2::gentoo
>>> Emerging (87 of 202) sys-apps/busybox-1.25.1::gentoo
Command exited with non-zero status 1
17.91user 4.70system 33:23:46elapsed 0%CPU (0avgtext+0avgdata 327112maxresident)k
24inputs+2214576outputs (0major+203854minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20170301.rkMtDg/log/hardened_stage3-selinux-nomultilib.log
^ permalink raw reply [flat|nested] 15+ messages in thread
* [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage3-selinux-nomultilib.spec
@ 2015-12-08 16:13 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2015-12-08 16:13 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
* Messages for package dev-python/setuptools-18.4:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/certifi-2015.11.20:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ipy-0.82a:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyxattr-0.5.3:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-libs/glibc-2.21-r1:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-apps/less-481:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package sys-libs/libselinux-2.4:
* FAILED postinst: 1
* ERROR: sys-libs/libselinux-2.4::gentoo failed (postinst phase):
* Failed to recompile contexts
*
* Call stack:
* ebuild.sh, line 93: Called pkg_postinst
* environment, line 2613: Called die
* The specific snippet of code:
* sefcontext_compile /etc/selinux/${POLTYPE}/contexts/files/${EXPRFILE} || die "Failed to recompile contexts";
*
* If you need support, post the output of `emerge --info '=sys-libs/libselinux-2.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/libselinux-2.4::gentoo'`.
* The complete build log is located at '/home/release/tmp/logs/sys-libs:libselinux-2.4:20151208-145040.log'.
* For convenience, a symlink to the build log is located at '/var/tmp/portage/sys-libs/libselinux-2.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/libselinux-2.4/temp/environment'.
* Working directory: '/var/tmp/portage/._portage_reinstall_.8lltup29/pym'
* S: '/var/tmp/portage/sys-libs/libselinux-2.4/work/libselinux-2.4'
* Messages for package sys-apps/busybox-1.24.1:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.24.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.24.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package sys-apps/coreutils-8.23:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-devel/gcc-4.9.3:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package sys-process/audit-2.2.2-r2:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-libs/pam-1.2.1:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-apps/util-linux-2.26.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-apps/policycoreutils-2.4-r2:
* The selinux_gentoo init script has been removed in this version as it is not required after OpenRC 0.13.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-apps/man-db-2.7.2:
* Defaulting to USE=gdbm due to ambiguous berkdb/gdbm USE flag settings
* Messages for package sys-apps/sysvinit-2.88-r7:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package sys-apps/openrc-0.18.4:
* Auto-adding 'termencoding' service to your boot runlevel
* Auto-adding 'swapfiles' service to your boot runlevel
* Auto-adding 'sysfs' service to your sysinit runlevel
* Auto-adding 'tmpfiles.setup' service to your boot runlevel
* Auto-adding 'loopback' service to your boot runlevel
* Auto-adding 'tmpfiles.dev' service to your sysinit runlevel
* Auto-adding 'binfmt' service to your boot runlevel
* Auto-adding 'mtab' service to your boot runlevel
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package net-misc/netifrc-0.2.2:
* The network configuration scripts will use dhcp by
* default to set up your interfaces.
* If you need to set up something more complete, see
* //usr/share/doc/netifrc-0.2.2/README
* Messages for package dev-libs/glib-2.44.1-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
08 Dec 2015 16:13:41 UTC: ERROR : CatalystError: cmd() NON-zero return value from: run script failed.
08 Dec 2015 16:13:41 UTC: ERROR : CatalystError: Stage build aborting due to error.
08 Dec 2015 16:13:41 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1397, in run
getattr(self, x)()
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1309, in run_local
print_traceback=False)
CatalystError
08 Dec 2015 16:13:41 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /home/release/tmp/run/catalyst-auto.cXyDdj/log/hardened_stage3-selinux-nomultilib.log
^ permalink raw reply [flat|nested] 15+ messages in thread* [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage3-selinux-nomultilib.spec
@ 2015-12-05 13:01 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2015-12-05 13:01 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
* Messages for package dev-python/setuptools-18.4:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/certifi-2015.11.20:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ipy-0.82a:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyxattr-0.5.3:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-apps/less-481:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package sys-libs/libselinux-2.4:
* FAILED postinst: 1
* ERROR: sys-libs/libselinux-2.4::gentoo failed (postinst phase):
* Failed to recompile contexts
*
* Call stack:
* ebuild.sh, line 93: Called pkg_postinst
* environment, line 2613: Called die
* The specific snippet of code:
* sefcontext_compile /etc/selinux/${POLTYPE}/contexts/files/${EXPRFILE} || die "Failed to recompile contexts";
*
* If you need support, post the output of `emerge --info '=sys-libs/libselinux-2.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/libselinux-2.4::gentoo'`.
* The complete build log is located at '/home/release/tmp/logs/sys-libs:libselinux-2.4:20151205-112749.log'.
* For convenience, a symlink to the build log is located at '/var/tmp/portage/sys-libs/libselinux-2.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/libselinux-2.4/temp/environment'.
* Working directory: '/var/tmp/portage/._portage_reinstall_.60z9dzbl/pym'
* S: '/var/tmp/portage/sys-libs/libselinux-2.4/work/libselinux-2.4'
* Messages for package sys-apps/busybox-1.24.1:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.24.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.24.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package sys-libs/glibc-2.21-r1:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-apps/coreutils-8.23:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-devel/gcc-4.9.3:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package sys-process/audit-2.2.2-r2:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-libs/pam-1.2.1:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-apps/util-linux-2.26.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-apps/policycoreutils-2.4-r2:
* The selinux_gentoo init script has been removed in this version as it is not required after OpenRC 0.13.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-apps/man-db-2.7.2:
* Defaulting to USE=gdbm due to ambiguous berkdb/gdbm USE flag settings
* Messages for package sys-apps/sysvinit-2.88-r7:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package sys-apps/openrc-0.18.4:
* Auto-adding 'termencoding' service to your boot runlevel
* Auto-adding 'swapfiles' service to your boot runlevel
* Auto-adding 'sysfs' service to your sysinit runlevel
* Auto-adding 'tmpfiles.setup' service to your boot runlevel
* Auto-adding 'loopback' service to your boot runlevel
* Auto-adding 'tmpfiles.dev' service to your sysinit runlevel
* Auto-adding 'binfmt' service to your boot runlevel
* Auto-adding 'mtab' service to your boot runlevel
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package net-misc/netifrc-0.2.2:
* The network configuration scripts will use dhcp by
* default to set up your interfaces.
* If you need to set up something more complete, see
* //usr/share/doc/netifrc-0.2.2/README
* Messages for package dev-libs/glib-2.44.1-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
05 Dec 2015 13:01:34 UTC: ERROR : CatalystError: cmd() NON-zero return value from: run script failed.
05 Dec 2015 13:01:35 UTC: ERROR : CatalystError: Stage build aborting due to error.
05 Dec 2015 13:01:35 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1397, in run
getattr(self, x)()
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1309, in run_local
print_traceback=False)
CatalystError
05 Dec 2015 13:01:35 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /home/release/tmp/run/catalyst-auto.NVkTlQ/log/hardened_stage3-selinux-nomultilib.log
^ permalink raw reply [flat|nested] 15+ messages in thread* [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage3-selinux-nomultilib.spec
@ 2015-12-01 14:39 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2015-12-01 14:39 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ipy-0.82a:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyxattr-0.5.3:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-apps/less-481:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package sys-libs/libselinux-2.4:
* FAILED postinst: 1
* ERROR: sys-libs/libselinux-2.4::gentoo failed (postinst phase):
* Failed to recompile contexts
*
* Call stack:
* ebuild.sh, line 93: Called pkg_postinst
* environment, line 2613: Called die
* The specific snippet of code:
* sefcontext_compile /etc/selinux/${POLTYPE}/contexts/files/${EXPRFILE} || die "Failed to recompile contexts";
*
* If you need support, post the output of `emerge --info '=sys-libs/libselinux-2.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/libselinux-2.4::gentoo'`.
* The complete build log is located at '/home/release/tmp/logs/sys-libs:libselinux-2.4:20151201-130729.log'.
* For convenience, a symlink to the build log is located at '/var/tmp/portage/sys-libs/libselinux-2.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/libselinux-2.4/temp/environment'.
* Working directory: '/var/tmp/portage/._portage_reinstall_.dt7v8dky/pym'
* S: '/var/tmp/portage/sys-libs/libselinux-2.4/work/libselinux-2.4'
* Messages for package sys-apps/busybox-1.23.1-r1:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.23.1-r1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.23.1-r1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package sys-libs/glibc-2.21-r1:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-apps/coreutils-8.23:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-devel/gcc-4.9.3:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package dev-python/pypax-0.9.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-process/audit-2.2.2-r2:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-libs/pam-1.2.1:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-apps/util-linux-2.26.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-apps/policycoreutils-2.4-r2:
* The selinux_gentoo init script has been removed in this version as it is not required after OpenRC 0.13.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-apps/man-db-2.7.2:
* Defaulting to USE=gdbm due to ambiguous berkdb/gdbm USE flag settings
* Messages for package sys-apps/sysvinit-2.88-r7:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package sys-apps/openrc-0.17:
* Auto-adding 'termencoding' service to your boot runlevel
* Auto-adding 'swapfiles' service to your boot runlevel
* Auto-adding 'sysfs' service to your sysinit runlevel
* Auto-adding 'tmpfiles.setup' service to your boot runlevel
* Auto-adding 'loopback' service to your boot runlevel
* Auto-adding 'tmpfiles.dev' service to your sysinit runlevel
* Auto-adding 'binfmt' service to your boot runlevel
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package net-misc/netifrc-0.2.2:
* The network configuration scripts will use dhcp by
* default to set up your interfaces.
* If you need to set up something more complete, see
* //usr/share/doc/netifrc-0.2.2/README
* Messages for package dev-libs/glib-2.44.1-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
01 Dec 2015 14:39:56 UTC: ERROR : CatalystError: cmd() NON-zero return value from: run script failed.
01 Dec 2015 14:39:56 UTC: ERROR : CatalystError: Stage build aborting due to error.
01 Dec 2015 14:39:56 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1397, in run
getattr(self, x)()
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1309, in run_local
print_traceback=False)
CatalystError
01 Dec 2015 14:39:56 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /home/release/tmp/run/catalyst-auto.rOdj0f/log/hardened_stage3-selinux-nomultilib.log
^ permalink raw reply [flat|nested] 15+ messages in thread* [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage3-selinux-nomultilib.spec
@ 2015-11-24 7:57 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2015-11-24 7:57 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/setuptools-18.4:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/certifi-2015.9.6.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ipy-0.82a:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyxattr-0.5.3:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-libs/glibc-2.21-r1:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-apps/less-481:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package sys-libs/libselinux-2.4:
* FAILED postinst: 1
* ERROR: sys-libs/libselinux-2.4::gentoo failed (postinst phase):
* Failed to recompile contexts
*
* Call stack:
* ebuild.sh, line 93: Called pkg_postinst
* environment, line 2593: Called die
* The specific snippet of code:
* sefcontext_compile /etc/selinux/${POLTYPE}/contexts/files/${EXPRFILE} || die "Failed to recompile contexts";
*
* If you need support, post the output of `emerge --info '=sys-libs/libselinux-2.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/libselinux-2.4::gentoo'`.
* The complete build log is located at '/home/release/tmp/logs/sys-libs:libselinux-2.4:20151124-063847.log'.
* For convenience, a symlink to the build log is located at '/var/tmp/portage/sys-libs/libselinux-2.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/libselinux-2.4/temp/environment'.
* Working directory: '/var/tmp/portage/._portage_reinstall_.mjazra0k/pym'
* S: '/var/tmp/portage/sys-libs/libselinux-2.4/work/libselinux-2.4'
* Messages for package sys-apps/busybox-1.23.1-r1:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.23.1-r1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.23.1-r1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package sys-apps/coreutils-8.23:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-devel/gcc-4.9.3:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package sys-process/audit-2.2.2-r2:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-libs/pam-1.2.1:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-apps/util-linux-2.26.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-apps/policycoreutils-2.4-r2:
* The selinux_gentoo init script has been removed in this version as it is not required after OpenRC 0.13.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-apps/man-db-2.7.2:
* Defaulting to USE=gdbm due to ambiguous berkdb/gdbm USE flag settings
* Messages for package sys-apps/sysvinit-2.88-r7:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package sys-apps/openrc-0.17:
* Auto-adding 'termencoding' service to your boot runlevel
* Auto-adding 'swapfiles' service to your boot runlevel
* Auto-adding 'sysfs' service to your sysinit runlevel
* Auto-adding 'tmpfiles.setup' service to your boot runlevel
* Auto-adding 'loopback' service to your boot runlevel
* Auto-adding 'tmpfiles.dev' service to your sysinit runlevel
* Auto-adding 'binfmt' service to your boot runlevel
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package net-misc/netifrc-0.2.2:
* The network configuration scripts will use dhcp by
* default to set up your interfaces.
* If you need to set up something more complete, see
* //usr/share/doc/netifrc-0.2.2/README
* Messages for package dev-libs/glib-2.44.1-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
24 Nov 2015 07:57:45 UTC: ERROR : CatalystError: cmd() NON-zero return value from: run script failed.
24 Nov 2015 07:57:45 UTC: ERROR : CatalystError: Stage build aborting due to error.
24 Nov 2015 07:57:45 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1397, in run
getattr(self, x)()
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1309, in run_local
print_traceback=False)
CatalystError
24 Nov 2015 07:57:45 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /home/release/tmp/run/catalyst-auto.oyKqIK/log/hardened_stage3-selinux-nomultilib.log
^ permalink raw reply [flat|nested] 15+ messages in thread* [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage3-selinux-nomultilib.spec
@ 2015-11-24 4:53 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2015-11-24 4:53 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/setuptools-18.4:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/certifi-2015.9.6.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ipy-0.82a:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyxattr-0.5.3:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-libs/glibc-2.21-r1:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-apps/less-481:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package sys-libs/libselinux-2.4:
* FAILED postinst: 1
* ERROR: sys-libs/libselinux-2.4::gentoo failed (postinst phase):
* Failed to recompile contexts
*
* Call stack:
* ebuild.sh, line 93: Called pkg_postinst
* environment, line 2593: Called die
* The specific snippet of code:
* sefcontext_compile /etc/selinux/${POLTYPE}/contexts/files/${EXPRFILE} || die "Failed to recompile contexts";
*
* If you need support, post the output of `emerge --info '=sys-libs/libselinux-2.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/libselinux-2.4::gentoo'`.
* The complete build log is located at '/home/release/tmp/logs/sys-libs:libselinux-2.4:20151124-025929.log'.
* For convenience, a symlink to the build log is located at '/var/tmp/portage/sys-libs/libselinux-2.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/libselinux-2.4/temp/environment'.
* Working directory: '/var/tmp/portage/._portage_reinstall_.9cb6wde1/pym'
* S: '/var/tmp/portage/sys-libs/libselinux-2.4/work/libselinux-2.4'
* Messages for package sys-apps/busybox-1.23.1-r1:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.23.1-r1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.23.1-r1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package sys-apps/coreutils-8.23:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-devel/gcc-4.9.3:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package sys-process/audit-2.2.2-r2:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-libs/pam-1.2.1:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-apps/util-linux-2.26.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-apps/policycoreutils-2.4-r2:
* The selinux_gentoo init script has been removed in this version as it is not required after OpenRC 0.13.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-apps/man-db-2.7.2:
* Defaulting to USE=gdbm due to ambiguous berkdb/gdbm USE flag settings
* Messages for package sys-apps/sysvinit-2.88-r7:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package sys-apps/openrc-0.17:
* Auto-adding 'termencoding' service to your boot runlevel
* Auto-adding 'swapfiles' service to your boot runlevel
* Auto-adding 'sysfs' service to your sysinit runlevel
* Auto-adding 'tmpfiles.setup' service to your boot runlevel
* Auto-adding 'loopback' service to your boot runlevel
* Auto-adding 'tmpfiles.dev' service to your sysinit runlevel
* Auto-adding 'binfmt' service to your boot runlevel
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package net-misc/netifrc-0.2.2:
* The network configuration scripts will use dhcp by
* default to set up your interfaces.
* If you need to set up something more complete, see
* //usr/share/doc/netifrc-0.2.2/README
* Messages for package dev-libs/glib-2.44.1-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
24 Nov 2015 04:53:38 UTC: ERROR : CatalystError: cmd() NON-zero return value from: run script failed.
24 Nov 2015 04:53:39 UTC: ERROR : CatalystError: Stage build aborting due to error.
24 Nov 2015 04:53:39 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1397, in run
getattr(self, x)()
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1309, in run_local
print_traceback=False)
CatalystError
24 Nov 2015 04:53:39 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /home/release/tmp/run/catalyst-auto.rozGpM/log/hardened_stage3-selinux-nomultilib.log
^ permalink raw reply [flat|nested] 15+ messages in thread* [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage3-selinux-nomultilib.spec
@ 2015-10-20 15:46 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2015-10-20 15:46 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package dev-python/setuptools-12.0.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ipy-0.82a:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyxattr-0.5.3:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-libs/glibc-2.20-r2:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-apps/less-478:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package sys-libs/libselinux-2.4:
* FAILED postinst: 1
* ERROR: sys-libs/libselinux-2.4::gentoo failed (postinst phase):
* Failed to recompile contexts
*
* Call stack:
* ebuild.sh, line 93: Called pkg_postinst
* environment, line 2596: Called die
* The specific snippet of code:
* sefcontext_compile /etc/selinux/${POLTYPE}/contexts/files/${EXPRFILE} || die "Failed to recompile contexts";
*
* If you need support, post the output of `emerge --info '=sys-libs/libselinux-2.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/libselinux-2.4::gentoo'`.
* The complete build log is located at '/home/release/tmp/logs/sys-libs:libselinux-2.4:20151020-142229.log'.
* For convenience, a symlink to the build log is located at '/var/tmp/portage/sys-libs/libselinux-2.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/libselinux-2.4/temp/environment'.
* Working directory: '/var/tmp/portage/._portage_reinstall_.3ql4rha7/pym'
* S: '/var/tmp/portage/sys-libs/libselinux-2.4/work/libselinux-2.4'
* Messages for package sys-apps/coreutils-8.23:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-devel/gcc-4.9.3:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package sys-process/audit-2.2.2-r2:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-libs/pam-1.2.1:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-apps/util-linux-2.26.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-apps/busybox-1.23.1-r1:
* Could not locate user configfile, so we will save a default one
* You cannot have USE='static pam'. Assuming static is more important.
* Your configuration for sys-apps/busybox-1.23.1-r1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.23.1-r1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package net-misc/openssh-6.9_p1-r2:
* Remember to merge your config files in /etc/ssh/ and then
* reload sshd: '/etc/init.d/sshd reload'.
* Note: openssh-6.7 versions no longer support USE=tcpd as upstream has
* dropped it. Make sure to update any configs that you might have.
* Messages for package sys-apps/policycoreutils-2.4-r2:
* The selinux_gentoo init script has been removed in this version as it is not required after OpenRC 0.13.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-apps/sysvinit-2.88-r7:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package sys-apps/man-db-2.7.2:
* Defaulting to USE=gdbm due to ambiguous berkdb/gdbm USE flag settings
* Messages for package sys-apps/openrc-0.17:
* Auto-adding 'termencoding' service to your boot runlevel
* Auto-adding 'swapfiles' service to your boot runlevel
* Auto-adding 'sysfs' service to your sysinit runlevel
* Auto-adding 'tmpfiles.setup' service to your boot runlevel
* Auto-adding 'loopback' service to your boot runlevel
* Auto-adding 'tmpfiles.dev' service to your sysinit runlevel
* Auto-adding 'binfmt' service to your boot runlevel
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package net-misc/netifrc-0.2.2:
* The network configuration scripts will use dhcp by
* default to set up your interfaces.
* If you need to set up something more complete, see
* //usr/share/doc/netifrc-0.2.2/README
* Messages for package dev-libs/glib-2.44.1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
!!! catalyst: cmd() NON-zero return value from: run script failed.
!!! catalyst: Stage build aborting due to error.
--- Exeption running action sequence:run_local
!!! catalyst: Error encountered during run of target stage3
Full build log at /home/release/tmp/run/catalyst-auto.TbE24l/log/hardened_stage3-selinux-nomultilib.log
^ permalink raw reply [flat|nested] 15+ messages in thread* [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage3-selinux-nomultilib.spec
@ 2015-10-20 4:27 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2015-10-20 4:27 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package dev-python/setuptools-12.0.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ipy-0.82a:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyxattr-0.5.3:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-apps/less-478:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package sys-libs/libselinux-2.4:
* FAILED postinst: 1
* ERROR: sys-libs/libselinux-2.4::gentoo failed (postinst phase):
* Failed to recompile contexts
*
* Call stack:
* ebuild.sh, line 93: Called pkg_postinst
* environment, line 2596: Called die
* The specific snippet of code:
* sefcontext_compile /etc/selinux/${POLTYPE}/contexts/files/${EXPRFILE} || die "Failed to recompile contexts";
*
* If you need support, post the output of `emerge --info '=sys-libs/libselinux-2.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/libselinux-2.4::gentoo'`.
* The complete build log is located at '/home/release/tmp/logs/sys-libs:libselinux-2.4:20151020-021406.log'.
* For convenience, a symlink to the build log is located at '/var/tmp/portage/sys-libs/libselinux-2.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/libselinux-2.4/temp/environment'.
* Working directory: '/var/tmp/portage/._portage_reinstall_.txfs2jx3/pym'
* S: '/var/tmp/portage/sys-libs/libselinux-2.4/work/libselinux-2.4'
* Messages for package sys-libs/glibc-2.20-r2:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-apps/coreutils-8.23:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-devel/gcc-4.9.3:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package sys-process/audit-2.2.2-r2:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-libs/pam-1.2.1:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-apps/util-linux-2.26.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-apps/busybox-1.23.1-r1:
* Could not locate user configfile, so we will save a default one
* You cannot have USE='static pam'. Assuming static is more important.
* Your configuration for sys-apps/busybox-1.23.1-r1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.23.1-r1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package net-misc/openssh-6.9_p1-r2:
* Remember to merge your config files in /etc/ssh/ and then
* reload sshd: '/etc/init.d/sshd reload'.
* Note: openssh-6.7 versions no longer support USE=tcpd as upstream has
* dropped it. Make sure to update any configs that you might have.
* Messages for package sys-apps/policycoreutils-2.4-r2:
* The selinux_gentoo init script has been removed in this version as it is not required after OpenRC 0.13.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-apps/sysvinit-2.88-r7:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package sys-apps/man-db-2.7.2:
* Defaulting to USE=gdbm due to ambiguous berkdb/gdbm USE flag settings
* Messages for package sys-apps/openrc-0.17:
* Auto-adding 'termencoding' service to your boot runlevel
* Auto-adding 'swapfiles' service to your boot runlevel
* Auto-adding 'sysfs' service to your sysinit runlevel
* Auto-adding 'tmpfiles.setup' service to your boot runlevel
* Auto-adding 'loopback' service to your boot runlevel
* Auto-adding 'tmpfiles.dev' service to your sysinit runlevel
* Auto-adding 'binfmt' service to your boot runlevel
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package net-misc/netifrc-0.2.2:
* The network configuration scripts will use dhcp by
* default to set up your interfaces.
* If you need to set up something more complete, see
* //usr/share/doc/netifrc-0.2.2/README
* Messages for package dev-libs/glib-2.44.1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
!!! catalyst: cmd() NON-zero return value from: run script failed.
!!! catalyst: Stage build aborting due to error.
--- Exeption running action sequence:run_local
!!! catalyst: Error encountered during run of target stage3
Full build log at /home/release/tmp/run/catalyst-auto.tYPSbK/log/hardened_stage3-selinux-nomultilib.log
^ permalink raw reply [flat|nested] 15+ messages in thread* [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage3-selinux-nomultilib.spec
@ 2015-10-13 8:54 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2015-10-13 8:54 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package dev-python/setuptools-12.0.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ipy-0.82a:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyxattr-0.5.3:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-libs/glibc-2.20-r2:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-apps/less-478:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package sys-libs/libselinux-2.4:
* FAILED postinst: 1
* ERROR: sys-libs/libselinux-2.4::gentoo failed (postinst phase):
* Failed to recompile contexts
*
* Call stack:
* ebuild.sh, line 93: Called pkg_postinst
* environment, line 2593: Called die
* The specific snippet of code:
* sefcontext_compile /etc/selinux/${POLTYPE}/contexts/files/${EXPRFILE} || die "Failed to recompile contexts";
*
* If you need support, post the output of `emerge --info '=sys-libs/libselinux-2.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/libselinux-2.4::gentoo'`.
* The complete build log is located at '/home/release/tmp/logs/sys-libs:libselinux-2.4:20151013-073357.log'.
* For convenience, a symlink to the build log is located at '/var/tmp/portage/sys-libs/libselinux-2.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/libselinux-2.4/temp/environment'.
* Working directory: '/var/tmp/portage/._portage_reinstall_.obr330da/pym'
* S: '/var/tmp/portage/sys-libs/libselinux-2.4/work/libselinux-2.4'
* Messages for package sys-apps/coreutils-8.23:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-devel/gcc-4.9.3:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package sys-process/audit-2.2.2-r2:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-libs/pam-1.2.1:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-apps/util-linux-2.26.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-apps/busybox-1.23.1-r1:
* Could not locate user configfile, so we will save a default one
* You cannot have USE='static pam'. Assuming static is more important.
* Your configuration for sys-apps/busybox-1.23.1-r1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.23.1-r1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package net-misc/openssh-6.9_p1-r2:
* Remember to merge your config files in /etc/ssh/ and then
* reload sshd: '/etc/init.d/sshd reload'.
* Note: openssh-6.7 versions no longer support USE=tcpd as upstream has
* dropped it. Make sure to update any configs that you might have.
* Messages for package sys-apps/policycoreutils-2.4-r2:
* The selinux_gentoo init script has been removed in this version as it is not required after OpenRC 0.13.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-apps/man-db-2.7.2:
* Defaulting to USE=gdbm due to ambiguous berkdb/gdbm USE flag settings
* Messages for package sys-apps/sysvinit-2.88-r7:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package sys-apps/openrc-0.17:
* Auto-adding 'termencoding' service to your boot runlevel
* Auto-adding 'swapfiles' service to your boot runlevel
* Auto-adding 'sysfs' service to your sysinit runlevel
* Auto-adding 'tmpfiles.setup' service to your boot runlevel
* Auto-adding 'loopback' service to your boot runlevel
* Auto-adding 'tmpfiles.dev' service to your sysinit runlevel
* Auto-adding 'binfmt' service to your boot runlevel
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package net-misc/netifrc-0.2.2:
* The network configuration scripts will use dhcp by
* default to set up your interfaces.
* If you need to set up something more complete, see
* //usr/share/doc/netifrc-0.2.2/README
* Messages for package dev-libs/glib-2.44.1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
!!! catalyst: cmd() NON-zero return value from: run script failed.
!!! catalyst: Stage build aborting due to error.
--- Exeption running action sequence:run_local
!!! catalyst: Error encountered during run of target stage3
Full build log at /home/release/tmp/run/catalyst-auto.a4DRSQ/log/hardened_stage3-selinux-nomultilib.log
^ permalink raw reply [flat|nested] 15+ messages in thread* [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage3-selinux-nomultilib.spec
@ 2015-04-20 12:55 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2015-04-20 12:55 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
config.status: creating nm
config.status: creating Makefile
config.status: creating ada/gcc-interface/Makefile
config.status: creating ada/Makefile
config.status: creating auto-host.h
config.status: executing default commands
make[3]: Entering directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/gcc'
gawk -f /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/opt-gather.awk /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/ada/gcc-interface/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/fortran/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/go/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/java/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/lto/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/c-family/c.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/common.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/fused-madd.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/gnu-user.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/linux.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/linux-android.opt > tmp-optionlist
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-optionlist optionlist
echo timestamp > s-options
TARGET_CPU_DEFAULT="" \
HEADERS="config/i386/i386-protos.h tm-preds.h" DEFINES="" \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/mkconfig.sh tm_p.h
rm -f tmp-all-tree.def
echo '#include "tree.def"' > tmp-all-tree.def
echo 'END_OF_BASE_TREE_CODES' >> tmp-all-tree.def
echo '#include "c-family/c-common.def"' >> tmp-all-tree.def
ltf="/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/ada/gcc-interface/ada-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/cp/cp-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/java/java-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/objc/objc-tree.def"; for f in $ltf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/||' >> tmp-all-tree.def
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-all-tree.def all-tree.def
echo timestamp > s-alltree
if test no = yes \
|| test -n "m64=../lib64 m32=../lib mx32=../libx32"; then \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/genmultilib \
"m64" \
" 64" \
"" \
"" \
"" \
"" \
"m64=../lib64 m32=../lib mx32=../libx32" \
"" \
"" \
"" \
"no" \
> tmp-mlib.h; \
else \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/genmultilib '' '' '' '' '' '' '' '' \
"" '' no \
> tmp-mlib.h; \
fi
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-mlib.h multilib.h
echo timestamp > s-mlib
lsf="/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/cp/lang-specs.h /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/lto/lang-specs.h"; for f in $lsf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/||' > tmp-specs.h
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-specs.h specs.h
echo timestamp > s-specs
echo "/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/ -B/usr/x86_64-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-x86_64-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-x86_64-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-x86_64-pc-linux-gnu/libstdc++-v3/include/x86_64-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-x86_64-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-x86_64-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-x86_64-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -DEFAULT_PIE_SSP -fno-PIE -m64 -O2 -pipe -gtoggle -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall
-Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -static-libstdc++ -static-libgcc " > checksum-options.tmp \
&& /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change checksum-options.tmp checksum-options
gawk -f /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386-builtin-types.awk /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386-builtin-types.def > tmp-bt.inc
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-bt.inc i386-builtin-types.inc
echo timestamp > s-i386-bt
cp /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gcc-ar.c gcc-nm.c
cp /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gcc-ar.c gcc-ranlib.c
/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/ -B/usr/x86_64-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-x86_64-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-x86_64-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-x86_64-pc-linux-gnu/libstdc++-v3/include/x86_64-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-x86_64-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-x86_64-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-x86_64-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -c -DEFAULT_PIE_SSP -fno-PIE -DHOST_GENERATOR_FILE -m64 -O2 -pipe -gtoggle -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwin
d-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c -o gengtype.o
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:0:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:500:34: error: declaration of C function 'const char* strsignal(int)' conflicts with
extern const char *strsignal (int);
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-x86_64-pc-linux-gnu/libstdc++-v3/include/cstring:42:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:205,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/usr/include/string.h:563:14: error: previous declaration 'char* strsignal(int)' here
extern char *strsignal (int __sig) __THROW;
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:645:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include/libiberty.h:110:36: error: new declaration 'char* basename(const char*)'
extern char *basename (const char *);
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-x86_64-pc-linux-gnu/libstdc++-v3/include/cstring:42:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:205,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/usr/include/string.h:600:26: error: ambiguates old declaration 'const char* basename(const char*)'
extern "C++" const char *basename (const char *__filename)
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:0:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:289:56: error: 'CHAR_BIT' was not declared in this scope
? ~ (t) 0 << (sizeof(t) * CHAR_BIT - 1) : (t) 0))
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:290:44: note: in expansion of macro 'INTTYPE_MINIMUM'
#define INTTYPE_MAXIMUM(t) ((t) (~ (t) 0 - INTTYPE_MINIMUM (t)))
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:294:20: note: in expansion of macro 'INTTYPE_MAXIMUM'
# define UCHAR_MAX INTTYPE_MAXIMUM (unsigned char)
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.h:455:23: note: in expansion of macro 'UCHAR_MAX'
CHAR_TOKEN_OFFSET = UCHAR_MAX + 1,
^
Makefile:1070: recipe for target 'gengtype.o' failed
make[3]: *** [gengtype.o] Error 1
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/gcc'
Makefile:4193: recipe for target 'all-stage2-gcc' failed
make[2]: *** [all-stage2-gcc] Error 2
make[2]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
Makefile:17046: recipe for target 'stage2-bubble' failed
make[1]: *** [stage2-bubble] Error 2
make[1]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
Makefile:17252: recipe for target 'bootstrap-lean' failed
make: *** [bootstrap-lean] Error 2
* ERROR: sys-devel/gcc-4.8.4::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.4::gentoo'`.
* The complete build log is located at '/var/log/portage/sys-devel:gcc-4.8.4:20150420-124850.log'.
* For convenience, a symlink to the build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-build-logs.tar.bz2 in your bug report.
*
* Messages for package sys-libs/timezone-data-2015b:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-apps/baselayout-2.2:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package dev-python/setuptools-12.0.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/ipy-0.82a:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyxattr-0.5.3:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-libs/glibc-2.20-r2:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-apps/less-458:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package sys-apps/coreutils-8.21:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-devel/gcc-4.8.4:
* ERROR: sys-devel/gcc-4.8.4::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.4::gentoo'`.
* The complete build log is located at '/var/log/portage/sys-devel:gcc-4.8.4:20150420-124850.log'.
* For convenience, a symlink to the build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-build-logs.tar.bz2 in your bug report.
*
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1253, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1333, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1258, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/amd64-dev/tmp/hardened/stage3-amd64-hardened-selinux+nomultilib-20150420/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.YCwgQV/log/hardened_stage3-selinux-nomultilib.log
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2020-12-24 18:40 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-10-15 5:32 [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage3-selinux-nomultilib.spec catalyst
-- strict thread matches above, loose matches on Subject: below --
2020-12-24 18:40 catalyst
2020-12-22 9:33 catalyst
2017-10-26 3:25 catalyst
2017-10-26 3:25 catalyst
2017-03-04 14:52 catalyst
2015-12-08 16:13 catalyst
2015-12-05 13:01 catalyst
2015-12-01 14:39 catalyst
2015-11-24 7:57 catalyst
2015-11-24 4:53 catalyst
2015-10-20 15:46 catalyst
2015-10-20 4:27 catalyst
2015-10-13 8:54 catalyst
2015-04-20 12:55 catalyst
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox