[gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - stage2.spec

[catalyst@nightheron.gentoo.org]

14 Jun 2020 22:10:53 UTC: NOTICE  : --- Running action sequence: unpack_snapshot
14 Jun 2020 22:10:53 UTC: NOTICE  : --- Running action sequence: setup_confdir
14 Jun 2020 22:10:53 UTC: NOTICE  : --- Running action sequence: portage_overlay
14 Jun 2020 22:10:53 UTC: NOTICE  : --- Running action sequence: base_dirs
14 Jun 2020 22:10:53 UTC: NOTICE  : --- Running action sequence: bind
14 Jun 2020 22:10:53 UTC: NOTICE  : --- Running action sequence: chroot_setup
14 Jun 2020 22:10:53 UTC: NOTICE  : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
14 Jun 2020 22:10:53 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
WARNING:catalyst:Overriding certain env variables may cause catastrophic failure.
14 Jun 2020 22:10:53 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
14 Jun 2020 22:10:53 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
WARNING:catalyst:Catalyst assumes you know what you are doing when setting these variables.
14 Jun 2020 22:10:53 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
WARNING:catalyst:Catalyst Maintainers use VERY minimal envscripts, if used at all.
14 Jun 2020 22:10:53 UTC: WARNING : You have been warned.
WARNING:catalyst:You have been warned.
14 Jun 2020 22:10:53 UTC: NOTICE  : Writing the stage make.conf to: /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200614T214503Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200614T214503Z/etc/portage/make.conf
14 Jun 2020 22:10:53 UTC: NOTICE  : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
14 Jun 2020 22:10:53 UTC: NOTICE  : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
14 Jun 2020 22:10:53 UTC: NOTICE  : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
Copying stage2-chroot.sh to /tmp
copying stage2-chroot.sh to /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200614T214503Z/tmp
copying chroot-functions.sh to /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200614T214503Z/tmp
Ensure the file has the executable bit set
Running stage2-chroot.sh in chroot:
    chroot /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200614T214503Z /tmp/stage2-chroot.sh
>>> Regenerating /etc/ld.so.cache...

Gentoo Linux; http://www.gentoo.org/
Copyright 1999-2020 Gentoo Authors; Distributed under the GPLv2
-------------------------------------------------------------------------------
  [[ (0/3) Locating packages ]]
 * Using baselayout : >=sys-apps/baselayout-2
 * Using portage    : sys-apps/portage
 * Using os-headers : >=sys-kernel/linux-headers-5.4-r1
 * Using binutils   : sys-devel/binutils
 * Using gcc        : sys-devel/gcc
 * Using gettext    : sys-devel/gettext
 * Using libc       : sys-libs/glibc:2.2
 * Using texinfo    : sys-apps/texinfo
 * Using zlib       : sys-libs/zlib
 * Using ncurses    : sys-libs/ncurses
-------------------------------------------------------------------------------
  [[ (1/3) Configuring environment ]]
-------------------------------------------------------------------------------
  [[ (2/3) Updating portage ]]

Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)


>>> Running pre-merge checks for sys-apps/portage-2.3.99-r2
 * Checking for suitable kernel configuration options...
 [ ok ]
>>> Emerging binary (1 of 1) sys-apps/portage-2.3.99-r2::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.99-r2::gentoo
-------------------------------------------------------------------------------
  [[ (3/3) Emerging packages ]]
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-libs/glibc-2.30-r8
 * Checking general environment sanity.
x86_64-pc-linux-gnu-gcc -m64 -pipe -O2   -Wl,-O1 -Wl,--as-needed  glibc-test.c   -o glibc-test
 * Checking gcc for __thread support ...
 [ ok ]
 * Checking running kernel version (4.14.34-gentoo-infra38 >= 3.2.0) ...
 [ ok ]
 * Checking linux-headers version (5.4.0 >= 3.2.0) ...
 [ ok ]
>>> Running pre-merge checks for sys-devel/gcc-9.3.0
>>> Emerging binary (1 of 16) sys-libs/zlib-1.2.11-r2::gentoo
>>> Installing (1 of 16) sys-libs/zlib-1.2.11-r2::gentoo
>>> Emerging binary (2 of 16) sys-apps/baselayout-2.6-r1::gentoo
>>> Installing (2 of 16) sys-apps/baselayout-2.6-r1::gentoo
>>> Emerging binary (3 of 16) sys-kernel/linux-headers-5.4-r1::gentoo
>>> Installing (3 of 16) sys-kernel/linux-headers-5.4-r1::gentoo
>>> Emerging binary (4 of 16) sys-libs/glibc-2.30-r8::gentoo
>>> Emerging binary (5 of 16) sys-devel/binutils-2.33.1-r1::gentoo
>>> Installing (4 of 16) sys-libs/glibc-2.30-r8::gentoo
>>> Installing (5 of 16) sys-devel/binutils-2.33.1-r1::gentoo
>>> Emerging binary (6 of 16) sys-devel/gettext-0.20.1::gentoo
>>> Installing (6 of 16) sys-devel/gettext-0.20.1::gentoo
>>> Emerging binary (7 of 16) sys-devel/gcc-9.3.0::gentoo
>>> Emerging binary (8 of 16) virtual/perl-File-Spec-3.780.0::gentoo
>>> Emerging binary (9 of 16) dev-perl/Text-Unidecode-1.300.0::gentoo
>>> Installing (8 of 16) virtual/perl-File-Spec-3.780.0::gentoo
>>> Emerging binary (10 of 16) virtual/perl-Carp-1.500.0-r2::gentoo
>>> Installing (9 of 16) dev-perl/Text-Unidecode-1.300.0::gentoo
>>> Emerging binary (11 of 16) virtual/perl-version-0.992.400::gentoo
>>> Emerging binary (12 of 16) dev-perl/Unicode-EastAsianWidth-1.330.0-r1::gentoo
>>> Installing (10 of 16) virtual/perl-Carp-1.500.0-r2::gentoo
>>> Emerging binary (13 of 16) dev-perl/Class-Inspector-1.320.0::gentoo
>>> Installing (11 of 16) virtual/perl-version-0.992.400::gentoo
>>> Installing (12 of 16) dev-perl/Unicode-EastAsianWidth-1.330.0-r1::gentoo
>>> Installing (13 of 16) dev-perl/Class-Inspector-1.320.0::gentoo
>>> Emerging binary (14 of 16) dev-perl/File-ShareDir-1.104.0::gentoo
>>> Installing (14 of 16) dev-perl/File-ShareDir-1.104.0::gentoo
>>> Installing (7 of 16) sys-devel/gcc-9.3.0::gentoo
>>> Emerging binary (15 of 16) dev-perl/libintl-perl-1.310.0::gentoo
>>> Installing (15 of 16) dev-perl/libintl-perl-1.310.0::gentoo
>>> Emerging (16 of 16) sys-apps/texinfo-6.7::gentoo
>>> Failed to emerge sys-apps/texinfo-6.7
 * Messages for package sys-apps/baselayout-2.6-r1:
 * The following users have non-existent shells!
 * halt - /sbin/halt
 * shutdown - /sbin/shutdown
 * Messages for package sys-devel/gcc-9.3.0:
 * If you have issues with packages unable to locate libstdc++.la,
 * then try running 'fix_libtool_files.sh' on the old gcc versions.
 * You might want to review the GCC upgrade guide when moving between
 * major versions (like 4.2 to 4.3):
 * https://wiki.gentoo.org/wiki/Upgrading_GCC
 * Messages for package sys-apps/texinfo-6.7:
 * ERROR: sys-apps/texinfo-6.7::gentoo failed (compile phase):
 *   emake failed
 * 
 * If you need support, post the output of `emerge --info '=sys-apps/texinfo-6.7::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=sys-apps/texinfo-6.7::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/sys-apps/texinfo-6.7/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/sys-apps/texinfo-6.7/temp/environment'.
 * Working directory: '/var/tmp/portage/sys-apps/texinfo-6.7/work/texinfo-6.7'
 * S: '/var/tmp/portage/sys-apps/texinfo-6.7/work/texinfo-6.7'







 * IMPORTANT: config file '/etc/locale.gen' needs updating.
 * See the CONFIGURATION FILES and CONFIGURATION FILES UPDATE TOOLS
 * sections of the emerge man page to learn how to update config files.
14 Jun 2020 22:13:29 UTC: ERROR   : CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1
14 Jun 2020 22:13:29 UTC: NOTICE  : /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200614T214503Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200614T214503Z/var/tmp/portage is not a mount point. Skipping
14 Jun 2020 22:13:29 UTC: ERROR   : CatalystError: Stage build aborting due to error.
ERROR:catalyst:CatalystError: Stage build aborting due to error.
14 Jun 2020 22:13:29 UTC: ERROR   : Exception running action sequence run_local
Traceback (most recent call last):
  File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1366, in run_local
    env=self.env)
  File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
    print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
    getattr(self, x)()
  File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1375, in run_local
    print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
ERROR:catalyst:Exception running action sequence run_local
Traceback (most recent call last):
  File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1366, in run_local
    env=self.env)
  File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
    print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
    getattr(self, x)()
  File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1375, in run_local
    print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
14 Jun 2020 22:13:29 UTC: NOTICE  : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
14 Jun 2020 22:13:29 UTC: NOTICE  : /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200614T214503Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200614T214503Z/tmp/kerncache is not a mount point. Skipping
14 Jun 2020 22:13:29 UTC: NOTICE  : /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200614T214503Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200614T214503Z/var/cache/binpkgs is not a mount point. Skipping
14 Jun 2020 22:13:29 UTC: NOTICE  : /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200614T214503Z/run is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200614T214503Z/run is not a mount point. Skipping
14 Jun 2020 22:13:29 UTC: NOTICE  : /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200614T214503Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200614T214503Z/dev/shm does not exist. Skipping
14 Jun 2020 22:13:29 UTC: NOTICE  : /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200614T214503Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200614T214503Z/dev/pts does not exist. Skipping
14 Jun 2020 22:13:29 UTC: NOTICE  : /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200614T214503Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200614T214503Z/var/tmp/portage is not a mount point. Skipping
14 Jun 2020 22:13:29 UTC: NOTICE  : /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200614T214503Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200614T214503Z/var/cache/distfiles is not a mount point. Skipping
14 Jun 2020 22:13:29 UTC: NOTICE  : /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200614T214503Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200614T214503Z/var/db/repos/gentoo is not a mount point. Skipping
14 Jun 2020 22:13:29 UTC: NOTICE  : /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200614T214503Z/dev is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200614T214503Z/dev is not a mount point. Skipping
14 Jun 2020 22:13:29 UTC: NOTICE  : /release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200614T214503Z/proc is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/amd64-dev/tmp/default/stage2-amd64-20200614T214503Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
143.33user 65.44system 2:40.14elapsed 130%CPU (0avgtext+0avgdata 104612maxresident)k
159336inputs+1854200outputs (2major+10707587minor)pagefaults 0swaps



Full build log at /release/tmp/run/catalyst-auto.20200614T214503Z.T1TUF9/log/stage2.log