* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2014-07-04 7:57 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2014-07-04 7:57 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20140704.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20140704/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20140704/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20140704.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.25415/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2014-07-11 7:55 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2014-07-11 7:55 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20140711.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20140711/
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 136, in __init__
self.set_chroot_path()
File "modules/generic_stage_target.py", line 449, in set_chroot_path
self.chroot_lock=catalyst_lock.LockDir(self.settings["chroot_path"])
File "/usr/lib/catalyst/modules/catalyst_lock.py", line 29, in __init__
self.set_lockdir(lockdir)
File "/usr/lib/catalyst/modules/catalyst_lock.py", line 66, in set_lockdir
os.makedirs(lockdir)
File "/usr/lib/python2.7/os.py", line 157, in makedirs
mkdir(name, mode)
OSError: [Errno 28] No space left on device: '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20140711/'
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.13626/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2014-07-18 7:59 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2014-07-18 7:59 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20140718.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20140718/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20140718/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20140718.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.16418/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2014-07-25 7:57 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2014-07-25 7:57 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20140725.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20140725/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20140725/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20140725.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.30359/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2014-08-01 7:57 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2014-08-01 7:57 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20140801.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20140801/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20140801/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20140801.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.24446/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2014-08-08 7:57 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2014-08-08 7:57 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20140808.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20140808/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20140808/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20140808.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.9682/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2014-08-15 7:57 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2014-08-15 7:57 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20140815.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20140815/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20140815/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20140815.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.26091/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2014-08-27 5:41 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2014-08-27 5:41 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/tmp/default/stage3-hppa1.1-20140822/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /usr/local/catalyst/builds/default/stage3-hppa1.1-20140822.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20140822/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20140822/
Location of the package cache is /usr/local/catalyst/packages/default/livecd-stage1-hppa1.1-20140822/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20140822/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20140822/
clearing chroot ...
Emptying directory /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20140822/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Starting rsync from /usr/local/catalyst/tmp/default/stage3-hppa1.1-20140822/
to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20140822/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
cp: cannot create regular file '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20140822//tmp/envscript': No such file or directory
!!! catalyst: Could not copy envscript into place.
/proc is still mounted; performing auto-bind-umount... Auto-unbind successful...
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1018, in chroot_setup
"Could not copy envscript into place.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20140822/.catalyst_lock'
Full build log at /tmp/catalyst-auto.7832/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2014-09-02 11:37 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2014-09-02 11:37 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/tmp/default/stage3-hppa1.1-20140829/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /usr/local/catalyst/builds/default/stage3-hppa1.1-20140829.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20140829/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20140829/
Location of the package cache is /usr/local/catalyst/packages/default/livecd-stage1-hppa1.1-20140829/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20140829/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20140829/
clearing chroot ...
Emptying directory /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20140829/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Starting rsync from /usr/local/catalyst/tmp/default/stage3-hppa1.1-20140829/
to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20140829/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
cp: cannot create regular file '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20140829//tmp/envscript': No such file or directory
!!! catalyst: Could not copy envscript into place.
/proc is still mounted; performing auto-bind-umount... Auto-unbind successful...
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1018, in chroot_setup
"Could not copy envscript into place.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20140829/.catalyst_lock'
Full build log at /tmp/catalyst-auto.12580/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2014-09-09 14:11 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2014-09-09 14:11 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/tmp/default/stage3-hppa1.1-20140905/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /usr/local/catalyst/builds/default/stage3-hppa1.1-20140905.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20140905/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20140905/
Location of the package cache is /usr/local/catalyst/packages/default/livecd-stage1-hppa1.1-20140905/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20140905/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20140905/
clearing chroot ...
Emptying directory /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20140905/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Starting rsync from /usr/local/catalyst/tmp/default/stage3-hppa1.1-20140905/
to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20140905/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
cp: cannot create regular file '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20140905//tmp/envscript': No such file or directory
!!! catalyst: Could not copy envscript into place.
/proc is still mounted; performing auto-bind-umount... Auto-unbind successful...
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1018, in chroot_setup
"Could not copy envscript into place.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20140905/.catalyst_lock'
Full build log at /tmp/catalyst-auto.10223/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2014-09-19 7:58 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2014-09-19 7:58 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20140919.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20140919/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20140919/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20140919.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.8385/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2014-09-26 7:55 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2014-09-26 7:55 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20140926.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20140926/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20140926/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20140926.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.4036/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2014-10-03 7:49 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2014-10-03 7:49 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20141003.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20141003/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20141003/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20141003.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.12941/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2014-10-10 7:48 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2014-10-10 7:48 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20141010.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20141010/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20141010/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20141010.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.3357/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2014-10-18 9:48 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2014-10-18 9:48 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20141017.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20141017/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20141017/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20141017.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.23296/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2014-10-28 18:05 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2014-10-28 18:05 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20141024.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20141024/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20141024/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20141024.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.5701/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2014-11-03 22:31 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2014-11-03 22:31 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20141031.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20141031/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20141031/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20141031.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.3830/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2014-11-13 6:26 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2014-11-13 6:26 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20141107.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20141107/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20141107/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20141107.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.23936/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2014-11-19 23:36 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2014-11-19 23:36 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20141114.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20141114/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20141114/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20141114.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.27192/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2014-11-24 21:19 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2014-11-24 21:19 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20141121.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20141121/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20141121/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20141121.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.19106/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2014-12-02 9:12 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2014-12-02 9:12 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20141128.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20141128/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20141128/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20141128.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.24108/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2014-12-10 14:31 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2014-12-10 14:31 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/tmp/default/stage3-hppa1.1-20141205/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /usr/local/catalyst/builds/default/stage3-hppa1.1-20141205.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20141205/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20141205/
Location of the package cache is /usr/local/catalyst/packages/default/livecd-stage1-hppa1.1-20141205/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20141205/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20141205/
clearing chroot ...
Emptying directory /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20141205/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Starting rsync from /usr/local/catalyst/tmp/default/stage3-hppa1.1-20141205/
to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20141205/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
cp: cannot create regular file '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20141205//tmp/envscript': No such file or directory
!!! catalyst: Could not copy envscript into place.
/proc is still mounted; performing auto-bind-umount... Auto-unbind successful...
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1018, in chroot_setup
"Could not copy envscript into place.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20141205/.catalyst_lock'
Full build log at /tmp/catalyst-auto.14352/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2014-12-12 9:39 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2014-12-12 9:39 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20141212.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20141212/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20141212/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20141212.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.18549/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2014-12-19 8:54 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2014-12-19 8:54 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20141219.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20141219/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20141219/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20141219.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.30898/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2014-12-26 8:52 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2014-12-26 8:52 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20141226.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20141226/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20141226/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20141226.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.19286/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-01-02 9:15 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-01-02 9:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150102.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150102/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150102/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150102.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.1009/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-01-02 18:46 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-01-02 18:46 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150102.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150102/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150102/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150102.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.ti2JQx/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-01-09 8:52 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-01-09 8:52 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150109.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150109/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150109/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150109.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.QHIWOK/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-01-22 19:33 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-01-22 19:33 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/tmp/default/stage3-hppa1.1-20150116/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /usr/local/catalyst/builds/default/stage3-hppa1.1-20150116.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150116/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150116/
Location of the package cache is /usr/local/catalyst/packages/default/livecd-stage1-hppa1.1-20150116/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150116/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150116/
clearing chroot ...
Emptying directory /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20150116/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Starting rsync from /usr/local/catalyst/tmp/default/stage3-hppa1.1-20150116/
to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20150116/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
cp: cannot create regular file '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20150116//tmp/envscript': No such file or directory
!!! catalyst: Could not copy envscript into place.
/proc is still mounted; performing auto-bind-umount... Auto-unbind successful...
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1018, in chroot_setup
"Could not copy envscript into place.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20150116/.catalyst_lock'
Full build log at /tmp/catalyst-auto.riayzO/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-01-23 8:58 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-01-23 8:58 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150123.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150123/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150123/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150123.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.cpn6Pk/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-01-30 8:59 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-01-30 8:59 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150130.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150130/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150130/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150130.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.EE4We7/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-02-06 8:59 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-02-06 8:59 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150206.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150206/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150206/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150206.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.aX1Qg2/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-02-13 9:00 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-02-13 9:00 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150213.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150213/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150213/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150213.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.aoxfCg/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-02-20 9:11 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-02-20 9:11 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150220.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150220/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150220/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150220.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.lQXi4B/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-02-27 15:50 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-02-27 15:50 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150227.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150227/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150227/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150227.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.xGxr9s/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-03-06 9:32 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-03-06 9:32 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150306.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150306/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150306/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150306.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.4EzM0H/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-03-13 7:57 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-03-13 7:57 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150313.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150313/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150313/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150313.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.79IUxY/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-03-20 8:06 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-03-20 8:06 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150320.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150320/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150320/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150320.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.8mYu8J/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-03-27 7:54 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-03-27 7:54 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150327.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150327/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150327/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150327.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.t26Ald/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-04-08 1:02 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-04-08 1:02 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150403.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150403/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150403/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150403.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.p50aPE/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-04-13 18:05 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-04-13 18:05 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150410.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150410/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150410/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150410.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.mAI47n/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-04-21 0:31 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-04-21 0:31 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150417.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150417/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150417/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150417.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.yoO4v6/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-04-27 16:49 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-04-27 16:49 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150424.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150424/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150424/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150424.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.H3urUh/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-05-03 21:19 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-05-03 21:19 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150501.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150501/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150501/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150501.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.2AIbcB/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-05-10 18:02 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-05-10 18:02 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150508.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150508/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150508/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150508.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.DcDxdU/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-05-17 18:19 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-05-17 18:19 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150515.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150515/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150515/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150515.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.AalGIc/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-05-25 4:56 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-05-25 4:56 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150522.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150522/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150522/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150522.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.HH7Pwm/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-06-01 15:12 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-06-01 15:12 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150529.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150529/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150529/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150529.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.bXzHzJ/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-06-06 16:58 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-06-06 16:58 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150605.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150605/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150605/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150605.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.53YBiW/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-06-13 8:24 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-06-13 8:24 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150612.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150612/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150612/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150612.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.p4Y22i/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-06-23 4:56 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-06-23 4:56 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150619.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150619/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150619/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150619.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.8QofVg/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-06-29 18:36 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-06-29 18:36 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150626.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150626/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150626/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150626.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.b9JncU/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-07-06 20:56 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-07-06 20:56 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150703.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150703/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150703/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150703.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.xO181i/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-07-13 19:43 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-07-13 19:43 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150710.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150710/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150710/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150710.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.40GJX5/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-07-21 7:25 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-07-21 7:25 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150717.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150717/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150717/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150717.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.2Ix5Gh/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-07-27 20:32 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-07-27 20:32 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150724.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150724/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150724/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150724.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.gIyqqU/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-08-03 22:33 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-08-03 22:33 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150731.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150731/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150731/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150731.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.PsEE2a/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-08-11 3:27 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-08-11 3:27 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150807.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150807/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150807/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150807.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.ymqAY0/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-08-18 2:42 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-08-18 2:42 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150814.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150814/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150814/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150814.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.9OTzMS/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-08-24 21:40 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-08-24 21:40 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150821.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150821/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150821/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150821.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.XtidJ7/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-08-31 23:09 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-08-31 23:09 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150828.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150828/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150828/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150828.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.seEKYL/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-09-07 20:39 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-09-07 20:39 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150904.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150904/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150904/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150904.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.o0DPqg/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-09-14 21:22 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-09-14 21:22 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150911.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150911/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20150911/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150911.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.hWh0sI/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-12-11 13:30 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-12-11 13:30 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20151211.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20151211/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20151211/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20151211.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.tbr9hy/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-12-18 13:30 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-12-18 13:30 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20151218.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20151218/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20151218/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20151218.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.ALZx2K/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2015-12-25 13:31 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2015-12-25 13:31 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20151225.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20151225/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20151225/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20151225.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.D0D9HF/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2016-01-01 13:35 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2016-01-01 13:35 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20160101.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20160101/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20160101/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20160101.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.li9tUH/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2016-01-08 13:31 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2016-01-08 13:31 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20160108.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20160108/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20160108/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20160108.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.7kyq5r/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2016-01-15 13:37 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2016-01-15 13:37 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20160115.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20160115/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20160115/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20160115.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.ZqPAob/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2016-01-22 14:08 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2016-01-22 14:08 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20160122.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20160122/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20160122/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20160122.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.dWVZsb/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2016-01-29 14:19 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2016-01-29 14:19 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20160129.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20160129/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20160129/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20160129.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.TfdPdx/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2016-03-16 21:56 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2016-03-16 21:56 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20160316.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20160316/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20160316/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20160316.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.rh7pNU/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2016-03-16 23:42 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2016-03-16 23:42 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20160316.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20160316/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20160316/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20160316.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.LuL2Wv/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2017-10-24 21:33 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2017-10-24 21:33 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20171021.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20171021/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20171021/
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 137, in __init__
self.set_autoresume_path()
File "modules/generic_stage_target.py", line 459, in set_autoresume_path
os.makedirs(self.settings["autoresume_path"],0755)
File "/usr/lib/python2.7/os.py", line 157, in makedirs
mkdir(name, mode)
OSError: [Errno 28] No space left on device: '/usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20171021/'
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Command exited with non-zero status 1
1.16user 0.44system 0:01.69elapsed 95%CPU (0avgtext+0avgdata 44608maxresident)k
0inputs+0outputs (0major+2892minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20171021.vlHlqm/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2017-11-03 16:01 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2017-11-03 16:01 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20171025.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20171025/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20171025/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20171025.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Command exited with non-zero status 1
1.18user 0.52system 0:06.83elapsed 24%CPU (0avgtext+0avgdata 44192maxresident)k
0inputs+0outputs (5major+2913minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20171025.Si2SbV/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2017-11-26 12:12 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2017-11-26 12:12 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: ./dev/input/event2: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js1: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event21: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event26: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event24: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js5: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event4: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event19: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js27: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse22: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse14: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse4: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event22: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event23: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js19: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse2: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js25: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse15: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse26: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event28: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js11: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event18: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse21: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse17: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js0: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js18: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse3: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js4: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event30: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse8: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event7: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js20: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event29: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js24: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event0: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse0: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js13: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event27: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event10: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event3: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js15: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event9: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse12: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse5: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js28: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event31: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event5: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js26: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event11: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js12: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event1: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse10: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js16: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse16: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js14: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js30: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js22: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse27: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event25: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event13: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse19: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event8: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse24: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js17: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse20: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse7: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js29: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse25: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mice: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event6: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/uinput: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js8: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js31: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse1: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse30: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event17: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js6: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse9: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js23: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event16: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event12: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/keyboard: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js21: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse11: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse28: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse6: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js9: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/tty49: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/tty15: Cannot mknod: No such file or directory
tar: ./proc: Cannot mkdir: No space left on device
tar: Exiting with failure status due to previous errors
!!! catalyst: Tarball extraction of /usr/local/catalyst/builds/default/stage3-hppa1.1-20171104.tar.bz2 to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20171104/ failed.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 758, in unpack
cmd(unpack_cmd,error_msg,env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20171104/.catalyst_lock'
Command exited with non-zero status 1
218.18user 43.96system 5:28.75elapsed 79%CPU (0avgtext+0avgdata 80656maxresident)k
0inputs+0outputs (7major+946981minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20171104.i1CWc5/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2017-12-04 8:11 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2017-12-04 8:11 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20171127.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20171127/
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 136, in __init__
self.set_chroot_path()
File "modules/generic_stage_target.py", line 449, in set_chroot_path
self.chroot_lock=catalyst_lock.LockDir(self.settings["chroot_path"])
File "/usr/lib/catalyst/modules/catalyst_lock.py", line 29, in __init__
self.set_lockdir(lockdir)
File "/usr/lib/catalyst/modules/catalyst_lock.py", line 66, in set_lockdir
os.makedirs(lockdir)
File "/usr/lib/python2.7/os.py", line 157, in makedirs
mkdir(name, mode)
OSError: [Errno 28] No space left on device: '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20171127/'
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Command exited with non-zero status 1
1.27user 0.40system 0:05.43elapsed 30%CPU (0avgtext+0avgdata 44160maxresident)k
0inputs+0outputs (0major+2916minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20171127.yNT9cq/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2017-12-19 9:46 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2017-12-19 9:46 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20171216T125008Z.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20171216T125008Z/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20171216T125008Z/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20171216T125008Z.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Command exited with non-zero status 1
1.23user 0.45system 0:04.76elapsed 35%CPU (0avgtext+0avgdata 44208maxresident)k
0inputs+0outputs (0major+2912minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20171216T125008Z.jebBVh/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2018-02-23 3:33 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2018-02-23 3:33 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage1.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20180211T081007Z.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20180211T081007Z/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20180211T081007Z/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20180211T081007Z.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Command exited with non-zero status 1
1.14user 0.52system 0:07.95elapsed 21%CPU (0avgtext+0avgdata 11200maxresident)k
0inputs+0outputs (18major+3084minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180211T081007Z.pYV9PH/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2018-03-25 7:30 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2018-03-25 7:30 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
Warning!!!
The use of -* in livecd/use will cause portage to ignore
package.use in the profile and portage_confdir. You've been warned!
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
Copying livecd-stage1-chroot.sh to /tmp
copying livecd-stage1-chroot.sh to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180304T081020Z//tmp
copying chroot-functions.sh to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180304T081020Z//tmp
Ensure the file has the executable bit set
Running livecd-stage1-chroot.sh in chroot /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180304T081020Z/
>>> Regenerating /etc/ld.so.cache...
Updating portage with USE=""
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.24-r1::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.24-r1::gentoo
emerge --quiet --usepkg --buildpkg --newuse --update --deep --newuse app-accessibility/brltty app-admin/hddtemp app-admin/passook app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-misc/screen app-portage/mirrorselect app-text/wgetpaste dev-util/debootstrap net-analyzer/traceroute net-dialup/mingetty net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-misc/vconfig net-proxy/dante sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/pciutils sys-apps/sdparm sys-apps/usbutils sys-devel/binutils-hppa64 sys-devel/kgcc64 sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/lsscsi sys-fs/cryptsetup sys-fs/lvm2 sys-fs/lsscsi sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links sys-devel/bc app-misc/livecd-tools
[ebuild R ] sys-libs/ncurses-6.0-r1
[ebuild R ] sys-devel/patch-2.7.6-r1
[ebuild N ] sys-apps/hwdata-gentoo-0.4
[ebuild R ] app-arch/unzip-6.0_p21-r2
[ebuild N ] net-dialup/mingetty-1.08-r1
[ebuild N ] sys-devel/autoconf-archive-2016.03.20-r1
[ebuild N ] app-admin/killproc-2.13-r1
[ebuild N ] net-dialup/ppp-scripts-0
[ebuild N ] net-analyzer/netselect-0.3-r3
[ebuild N ] sys-apps/miscfiles-1.5-r3
[ebuild N ] app-admin/pwgen-2.07
[ebuild N ] net-analyzer/traceroute-2.0.20
[ebuild N ] net-fs/cifs-utils-6.4
[ebuild N ] net-misc/rdate-1.4-r4
[ebuild N ] net-misc/vconfig-1.9
[ebuild N ] sys-apps/hdparm-9.52
[ebuild N ] sys-fs/lsscsi-0.28
[ebuild N ] sys-fs/reiserfsprogs-3.6.24
[ebuild R ] app-arch/xz-utils-5.2.3
[ebuild R ] app-shells/bash-4.4_p12
[ebuild R ] sys-apps/file-5.32
[ebuild N ] dev-libs/libassuan-2.5.1
[ebuild N ] dev-libs/libksba-1.3.5-r1
[ebuild N ] dev-libs/npth-1.3
[ebuild N ] dev-libs/libunistring-0.9.7
[ebuild N ] dev-libs/eventlog-0.2.12
[ebuild N ] dev-libs/libusb-1.0.19-r1
[ebuild N ] media-libs/libjpeg-turbo-1.5.0
[ebuild R ] dev-libs/gmp-6.1.2
[ebuild R ] sys-apps/coreutils-8.28-r1
[ebuild N ] media-libs/libpng-1.6.29
[ebuild N ] virtual/libusb-1-r1
[ebuild N ] virtual/jpeg-0-r2
[ebuild N ] sys-apps/ethtool-4.8
[ebuild N ] sys-devel/bc-1.06.95-r2
[ebuild R ] dev-lang/perl-5.24.3
[ebuild R ] dev-libs/openssl-1.0.2n
[ebuild N ] app-admin/passook-20121001
[ebuild R ] net-misc/iputils-20171016_pre
[ebuild N ] dev-libs/libevent-2.1.8
[ebuild N ] dev-libs/nettle-3.3-r2
[ebuild N ] sys-fs/dosfstools-4.0-r1
[ebuild N ] dev-python/six-1.10.0
[ebuild R ] dev-python/pyblake2-1.1.0
[ebuild R ] dev-python/setuptools-36.7.2
[ebuild R ] dev-python/certifi-2017.4.17
[ebuild N ] dev-python/idna-2.5
[ebuild N ] dev-python/PySocks-1.6.7
[ebuild N ] dev-python/pyasn1-0.2.3
[ebuild N ] dev-python/chardet-3.0.4
[ebuild N ] dev-python/asn1crypto-0.22.0
[ebuild N ] dev-python/enum34-1.1.6
[ebuild N ] dev-python/ply-3.9
[ebuild N ] dev-python/ipaddress-1.0.14
[ebuild N ] virtual/python-ipaddress-1.0-r1
[ebuild N ] dev-python/pycparser-2.14
[ebuild N ] sys-apps/sg3_utils-1.42
[ebuild N ] sys-apps/rescan-scsi-bus-1.57-r1
[ebuild N ] sys-apps/sdparm-1.10
[ebuild N ] net-dialup/ppp-2.4.7-r3
[ebuild N ] app-misc/screen-4.4.0
[ebuild N ] net-dialup/rp-pppoe-3.12-r1
[ebuild R ] sys-auth/pambase-20150213-r1
[ebuild R ] net-misc/rsync-3.1.3
[ebuild R ] sys-apps/hwids-20170328
[ebuild R ] dev-libs/libpcre-8.41-r1
[ebuild N ] net-libs/libtirpc-1.0.2-r1
[ebuild N ] net-proxy/dante-1.4.1-r1
[ebuild R ] sys-apps/openrc-0.34.11
[ebuild N ] dev-python/cffi-1.9.1
[ebuild N ] net-misc/curl-7.58.0
[ebuild N ] app-accessibility/brltty-5.2-r1
[ebuild N ] app-admin/hddtemp-0.3_beta15-r26
[ebuild N ] net-misc/dhcpcd-6.11.3
[ebuild N ] net-misc/ntp-4.2.8_p10-r1
[ebuild N ] www-client/links-2.14
[ebuild N ] sys-apps/pciutils-3.4.1
[ebuild N ] dev-python/cryptography-2.0.2-r1
[ebuild N ] net-nds/rpcbind-0.2.4-r1
[ebuild N ] dev-python/pyopenssl-17.2.0
[ebuild N ] sys-libs/libkudzu-1.2.57.1
[ebuild N ] net-fs/nfs-utils-1.3.4-r1
[ebuild N ] dev-python/ndg-httpsclient-0.4.0
[ebuild N ] dev-python/urllib3-1.22
[ebuild N ] sys-apps/hwsetup-1.2-r3
[ebuild N ] dev-python/requests-2.18.2-r1
[ebuild N ] dev-python/ssl-fetch-0.4
[ebuild N ] app-eselect/eselect-lib-bin-symlink-0.1.1
[ebuild N ] app-eselect/eselect-pinentry-0.7
[ebuild N ] dev-libs/libtasn1-4.12-r1
[ebuild N ] virtual/libudev-232
[ebuild N ] sys-apps/usbutils-008-r1
[ebuild R ] sys-apps/util-linux-2.30.2
[ebuild R ] sys-fs/eudev-3.1.5
[ebuild N ] sys-fs/mdadm-3.4
[ebuild R ] sys-apps/sed-4.2.2
[ebuild R ] sys-devel/binutils-2.29.1-r1
[ebuild R ] dev-libs/libxml2-2.9.6
[ebuild N ] sys-fs/lvm2-2.02.145-r2
[ebuild R ] sys-devel/gettext-0.19.8.1
[ebuild R ] dev-libs/libxslt-1.1.30-r2
[ebuild N ] sys-fs/cryptsetup-1.7.5
[ebuild R ] sys-libs/pam-1.2.1-r2
[ebuild R ] net-misc/wget-1.19.1-r2
[ebuild R ] sys-apps/shadow-4.5
[ebuild R ] dev-libs/elfutils-0.170-r1
[ebuild R ] app-arch/tar-1.29-r1
[ebuild R ] dev-libs/glib-2.50.3-r1
[ebuild N ] dev-util/dialog-1.3.20170131
[ebuild N ] sys-libs/binutils-libs-2.29.1-r1
[ebuild N ] app-arch/dpkg-1.19.0.5
[ebuild N ] net-libs/gnutls-3.5.15
[ebuild N ] app-crypt/pinentry-1.0.0-r2
[ebuild N ] sys-fs/xfsprogs-4.14.0
[ebuild N ] sys-devel/binutils-hppa64-2.29.1-r1
[ebuild N ] app-admin/syslog-ng-3.7.3
[ebuild N ] app-crypt/gnupg-2.2.4-r2
[ebuild N ] app-portage/mirrorselect-2.2.3
[ebuild N ] app-text/wgetpaste-2.28
[ebuild N ] dev-util/debootstrap-1.0.89
[ebuild N ] net-irc/irssi-1.0.6
[ebuild N ] app-misc/livecd-tools-2.3
[ebuild N ] sys-devel/kgcc64-6.4.0
[ebuild R ] sys-libs/glibc-2.25-r10
[ebuild R ] sys-devel/gcc-6.4.0-r1
[ebuild R ] sys-apps/iproute2-4.14.1-r2
The following USE changes are necessary to proceed:
(see "package.use" in the portage(5) man page for more details)
# required by dev-python/cryptography-2.0.2-r1::gentoo[-libressl]
# required by dev-python/urllib3-1.22::gentoo
# required by dev-python/requests-2.18.2-r1::gentoo
# required by dev-python/ssl-fetch-0.4::gentoo
# required by app-portage/mirrorselect-2.2.3::gentoo
# required by app-portage/mirrorselect (argument)
>=dev-libs/openssl-1.0.2n -bindist
# required by net-libs/gnutls-3.5.15::gentoo
# required by app-crypt/gnupg-2.2.4-r2::gentoo[ssl]
# required by app-crypt/gnupg (argument)
>=dev-libs/nettle-3.3-r2 gmp
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180304T081020Z/.catalyst_lock'
Command exited with non-zero status 1
514.73user 235.46system 20:36.32elapsed 60%CPU (0avgtext+0avgdata 60556maxresident)k
0inputs+0outputs (17major+1911056minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180304T081020Z.k96tiM/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2018-04-08 19:50 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2018-04-08 19:50 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: ./dev/input/event2: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js1: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event21: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event26: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event24: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js5: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event4: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event19: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js27: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse22: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse14: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse4: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event22: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event23: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js19: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse2: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js25: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse15: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse26: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event28: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js11: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event18: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse21: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse17: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js0: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js18: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse3: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js4: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event30: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse8: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event7: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js20: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event29: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js24: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event0: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse0: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js13: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event27: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event10: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event3: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js15: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event9: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse12: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse5: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js28: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event31: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event5: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js26: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event11: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js12: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event1: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse10: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js16: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse16: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js14: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js30: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js22: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse27: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event25: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event13: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse19: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event8: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse24: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js17: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse20: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse7: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js29: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse25: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mice: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event6: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/uinput: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js8: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js31: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse1: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse30: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event17: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js6: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse9: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js23: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event16: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/event12: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/keyboard: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js21: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse11: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse28: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/mouse6: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/input/js9: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/tty49: Cannot mknod: No such file or directory
tar: ./dev: Cannot mkdir: No space left on device
tar: ./dev/tty15: Cannot mknod: No such file or directory
tar: ./proc: Cannot mkdir: No space left on device
tar: Exiting with failure status due to previous errors
!!! catalyst: Tarball extraction of /usr/local/catalyst/builds/default/stage3-hppa1.1-20180327T071008Z.tar.bz2 to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180327T071008Z/ failed.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 758, in unpack
cmd(unpack_cmd,error_msg,env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180327T071008Z/.catalyst_lock'
Command exited with non-zero status 1
229.32user 47.47system 5:43.05elapsed 80%CPU (0avgtext+0avgdata 20304maxresident)k
0inputs+0outputs (22major+1004610minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180327T071008Z.4esjmv/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2018-04-14 20:33 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2018-04-14 20:33 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage1.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20180409T071008Z.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20180409T071008Z/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20180409T071008Z/
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 137, in __init__
self.set_autoresume_path()
File "modules/generic_stage_target.py", line 459, in set_autoresume_path
os.makedirs(self.settings["autoresume_path"],0755)
File "/usr/lib/python2.7/os.py", line 157, in makedirs
mkdir(name, mode)
OSError: [Errno 28] No space left on device: '/usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20180409T071008Z/'
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Command exited with non-zero status 1
1.21user 0.39system 0:01.70elapsed 94%CPU (0avgtext+0avgdata 11196maxresident)k
0inputs+0outputs (0major+3086minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180409T071008Z.0yy8WH/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2018-04-28 15:53 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2018-04-28 15:53 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
Warning!!!
The use of -* in livecd/use will cause portage to ignore
package.use in the profile and portage_confdir. You've been warned!
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
Copying livecd-stage1-chroot.sh to /tmp
copying livecd-stage1-chroot.sh to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180415T071008Z//tmp
copying chroot-functions.sh to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180415T071008Z//tmp
Ensure the file has the executable bit set
Running livecd-stage1-chroot.sh in chroot /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180415T071008Z/
>>> Regenerating /etc/ld.so.cache...
Updating portage with USE=""
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.24-r1::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.24-r1::gentoo
emerge --quiet --usepkg --buildpkg --newuse --update --deep --newuse app-accessibility/brltty app-admin/hddtemp app-admin/passook app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-misc/screen app-portage/mirrorselect app-text/wgetpaste dev-util/debootstrap net-analyzer/traceroute net-dialup/mingetty net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-misc/vconfig net-proxy/dante sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/pciutils sys-apps/sdparm sys-apps/usbutils sys-devel/binutils-hppa64 sys-devel/kgcc64 sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/lsscsi sys-fs/cryptsetup sys-fs/lvm2 sys-fs/lsscsi sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links sys-devel/bc app-misc/livecd-tools
[ebuild R ] sys-libs/ncurses-6.1-r2
[ebuild R ] sys-devel/patch-2.7.6-r1
[ebuild N ] sys-apps/hwdata-gentoo-0.4
[ebuild R ] app-arch/unzip-6.0_p21-r2
[ebuild N ] net-dialup/mingetty-1.08-r1
[ebuild N ] sys-devel/autoconf-archive-2017.09.28
[ebuild N ] app-admin/killproc-2.13-r1
[ebuild N ] net-dialup/ppp-scripts-0
[ebuild N ] net-analyzer/netselect-0.3-r3
[ebuild N ] dev-libs/ivykis-0.42.2
[ebuild N ] sys-apps/miscfiles-1.5-r3
[ebuild N ] app-admin/pwgen-2.07
[ebuild N ] net-analyzer/traceroute-2.0.20
[ebuild N ] net-fs/cifs-utils-6.4
[ebuild N ] net-misc/rdate-1.4-r4
[ebuild N ] net-misc/vconfig-1.9
[ebuild N ] sys-apps/hdparm-9.52
[ebuild N ] sys-fs/lsscsi-0.28
[ebuild N ] sys-fs/reiserfsprogs-3.6.25
[ebuild R ] app-arch/xz-utils-5.2.3
[ebuild R ] app-shells/bash-4.4_p12
[ebuild R ] sys-apps/file-5.32
[ebuild N ] dev-libs/libassuan-2.5.1
[ebuild N ] dev-libs/libksba-1.3.5-r1
[ebuild N ] dev-libs/npth-1.3
[ebuild N ] dev-libs/libunistring-0.9.7
[ebuild N ] dev-libs/libusb-1.0.19-r1
[ebuild N ] media-libs/libjpeg-turbo-1.5.0
[ebuild R ] dev-libs/gmp-6.1.2
[ebuild R ] sys-apps/coreutils-8.28-r1
[ebuild N ] media-libs/libpng-1.6.29
[ebuild N ] virtual/libusb-1-r1
[ebuild N ] virtual/jpeg-0-r2
[ebuild N ] sys-apps/ethtool-4.8
[ebuild N ] sys-devel/bc-1.06.95-r2
[ebuild R ] dev-lang/perl-5.24.3-r1
[ebuild R ] dev-libs/openssl-1.0.2o
[ebuild N ] app-admin/passook-20121001
[ebuild R ] net-misc/iputils-20171016_pre
[ebuild N ] dev-libs/libevent-2.1.8
[ebuild N ] dev-libs/nettle-3.3-r2
[ebuild N ] sys-fs/dosfstools-4.0-r1
[ebuild R ] dev-python/pyblake2-1.1.0
[ebuild R ] dev-python/setuptools-36.7.2
[ebuild R ] dev-python/certifi-2017.4.17
[ebuild N ] dev-python/idna-2.5
[ebuild N ] dev-python/PySocks-1.6.7
[ebuild N ] dev-python/six-1.11.0
[ebuild N ] dev-python/pyasn1-0.2.3
[ebuild N ] dev-python/chardet-3.0.4
[ebuild N ] dev-python/asn1crypto-0.22.0
[ebuild N ] dev-python/enum34-1.1.6
[ebuild N ] dev-python/ply-3.9
[ebuild N ] dev-python/ipaddress-1.0.19
[ebuild N ] virtual/python-ipaddress-1.0-r1
[ebuild N ] dev-python/pycparser-2.14
[ebuild N ] sys-apps/sg3_utils-1.42
[ebuild N ] sys-apps/rescan-scsi-bus-1.57-r1
[ebuild N ] sys-apps/sdparm-1.10
[ebuild N ] net-dialup/ppp-2.4.7-r3
[ebuild N ] app-misc/screen-4.4.0
[ebuild N ] net-dialup/rp-pppoe-3.12-r1
[ebuild R ] sys-auth/pambase-20150213-r1
[ebuild R ] net-misc/rsync-3.1.3
[ebuild R ] sys-apps/hwids-20170328
[ebuild R ] dev-libs/libpcre-8.41-r1
[ebuild N ] net-libs/libtirpc-1.0.2-r1
[ebuild N ] net-proxy/dante-1.4.1-r1
[ebuild R ] sys-apps/openrc-0.34.11
[ebuild N ] dev-python/cffi-1.11.4
[ebuild N ] net-misc/curl-7.59.0
[ebuild N ] app-accessibility/brltty-5.2-r1
[ebuild N ] app-admin/hddtemp-0.3_beta15-r26
[ebuild N ] net-misc/dhcpcd-6.11.3
[ebuild N ] net-misc/ntp-4.2.8_p11
[ebuild N ] www-client/links-2.14
[ebuild N ] sys-apps/pciutils-3.4.1
[ebuild N ] dev-python/cryptography-2.0.2-r1
[ebuild N ] net-nds/rpcbind-0.2.4-r3
[ebuild N ] dev-python/pyopenssl-17.2.0
[ebuild N ] sys-libs/libkudzu-1.2.57.1
[ebuild N ] net-fs/nfs-utils-2.3.1-r3
[ebuild N ] dev-python/ndg-httpsclient-0.4.0
[ebuild N ] dev-python/urllib3-1.22
[ebuild N ] sys-apps/hwsetup-1.2-r3
[ebuild N ] dev-python/requests-2.18.4
[ebuild N ] dev-python/ssl-fetch-0.4
[ebuild N ] app-eselect/eselect-lib-bin-symlink-0.1.1
[ebuild N ] app-eselect/eselect-pinentry-0.7
[ebuild N ] dev-libs/libtasn1-4.12-r1
[ebuild N ] virtual/libudev-232
[ebuild N ] sys-apps/usbutils-008-r1
[ebuild R ] sys-apps/util-linux-2.30.2-r1
[ebuild R ] sys-fs/eudev-3.1.5
[ebuild N ] sys-fs/mdadm-3.4
[ebuild R ] sys-apps/sed-4.2.2
[ebuild R ] sys-devel/binutils-2.29.1-r1
[ebuild R ] dev-libs/libxml2-2.9.6
[ebuild N ] sys-fs/lvm2-2.02.145-r2
[ebuild R ] sys-devel/gettext-0.19.8.1
[ebuild R ] dev-libs/libxslt-1.1.30-r2
[ebuild N ] sys-fs/cryptsetup-1.7.5
[ebuild R ] sys-libs/pam-1.2.1-r2
[ebuild R ] net-misc/wget-1.19.1-r2
[ebuild R ] sys-apps/shadow-4.5
[ebuild R ] dev-libs/elfutils-0.170-r1
[ebuild R ] app-arch/tar-1.29-r3
[ebuild R ] dev-libs/glib-2.50.3-r1
[ebuild N ] dev-util/dialog-1.3.20170131
[ebuild N ] sys-libs/binutils-libs-2.29.1-r1
[ebuild N ] app-arch/dpkg-1.19.0.5
[ebuild N ] net-libs/gnutls-3.5.15
[ebuild N ] app-crypt/pinentry-1.0.0-r2
[ebuild N ] sys-fs/xfsprogs-4.14.0
[ebuild N ] sys-devel/binutils-hppa64-2.29.1-r1
[ebuild N ] app-admin/syslog-ng-3.13.2
[ebuild N ] app-crypt/gnupg-2.2.4-r2
[ebuild N ] app-portage/mirrorselect-2.2.3
[ebuild N ] app-text/wgetpaste-2.28
[ebuild N ] dev-util/debootstrap-1.0.89
[ebuild N ] net-irc/irssi-1.0.6
[ebuild N ] app-misc/livecd-tools-2.3
[ebuild N ] sys-devel/kgcc64-6.4.0
[ebuild R ] sys-libs/glibc-2.25-r11
[ebuild R ] sys-devel/gcc-6.4.0-r1
[ebuild R ] sys-apps/iproute2-4.14.1-r2
The following USE changes are necessary to proceed:
(see "package.use" in the portage(5) man page for more details)
# required by dev-python/cryptography-2.0.2-r1::gentoo[-libressl]
# required by dev-python/requests-2.18.4::gentoo[ssl]
# required by dev-python/ssl-fetch-0.4::gentoo
# required by app-portage/mirrorselect-2.2.3::gentoo
# required by app-portage/mirrorselect (argument)
>=dev-libs/openssl-1.0.2o -bindist
# required by net-libs/gnutls-3.5.15::gentoo
# required by app-crypt/gnupg-2.2.4-r2::gentoo[ssl]
# required by app-crypt/gnupg (argument)
>=dev-libs/nettle-3.3-r2 gmp
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180415T071008Z/.catalyst_lock'
Command exited with non-zero status 1
503.45user 225.90system 13:28.68elapsed 90%CPU (0avgtext+0avgdata 61040maxresident)k
0inputs+0outputs (20major+1915623minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180415T071008Z.VoOHjM/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2018-05-11 18:33 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2018-05-11 18:33 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
Warning!!!
The use of -* in livecd/use will cause portage to ignore
package.use in the profile and portage_confdir. You've been warned!
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
Copying livecd-stage1-chroot.sh to /tmp
copying livecd-stage1-chroot.sh to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180430T071008Z//tmp
copying chroot-functions.sh to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180430T071008Z//tmp
Ensure the file has the executable bit set
Running livecd-stage1-chroot.sh in chroot /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180430T071008Z/
>>> Regenerating /etc/ld.so.cache...
Updating portage with USE=""
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.24-r1::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.24-r1::gentoo
emerge --quiet --usepkg --buildpkg --newuse --update --deep --newuse app-accessibility/brltty app-admin/hddtemp app-admin/passook app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-misc/screen app-portage/mirrorselect app-text/wgetpaste dev-util/debootstrap net-analyzer/traceroute net-dialup/mingetty net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-misc/vconfig net-proxy/dante sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/pciutils sys-apps/sdparm sys-apps/usbutils sys-devel/binutils-hppa64 sys-devel/kgcc64 sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/lsscsi sys-fs/cryptsetup sys-fs/lvm2 sys-fs/lsscsi sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links sys-devel/bc app-misc/livecd-tools
[ebuild R ] sys-libs/ncurses-6.1-r2
[ebuild R ] sys-devel/patch-2.7.6-r1
[ebuild N ] sys-apps/hwdata-gentoo-0.4
[ebuild R ] app-arch/unzip-6.0_p21-r2
[ebuild N ] net-dialup/mingetty-1.08-r1
[ebuild N ] sys-devel/autoconf-archive-2017.09.28
[ebuild N ] app-admin/killproc-2.13-r1
[ebuild N ] net-dialup/ppp-scripts-0
[ebuild N ] net-analyzer/netselect-0.3-r3
[ebuild N ] dev-libs/ivykis-0.42.2
[ebuild N ] sys-apps/miscfiles-1.5-r3
[ebuild N ] app-admin/pwgen-2.07
[ebuild N ] net-analyzer/traceroute-2.0.20
[ebuild N ] net-fs/cifs-utils-6.4
[ebuild N ] net-misc/rdate-1.4-r4
[ebuild N ] net-misc/vconfig-1.9
[ebuild N ] sys-apps/hdparm-9.52
[ebuild N ] sys-fs/lsscsi-0.28
[ebuild N ] sys-fs/reiserfsprogs-3.6.25
[ebuild R ] app-arch/xz-utils-5.2.3
[ebuild R ] app-shells/bash-4.4_p12
[ebuild R ] sys-apps/file-5.32
[ebuild N ] dev-libs/libassuan-2.5.1
[ebuild N ] dev-libs/libksba-1.3.5-r1
[ebuild N ] dev-libs/npth-1.3
[ebuild N ] dev-libs/libunistring-0.9.7
[ebuild N ] dev-libs/libusb-1.0.19-r1
[ebuild N ] media-libs/libjpeg-turbo-1.5.0
[ebuild R ] dev-libs/gmp-6.1.2
[ebuild R ] sys-apps/coreutils-8.28-r1
[ebuild N ] media-libs/libpng-1.6.29
[ebuild N ] virtual/libusb-1-r1
[ebuild N ] virtual/jpeg-0-r2
[ebuild N ] sys-apps/ethtool-4.13
[ebuild N ] sys-devel/bc-1.06.95-r2
[ebuild R ] dev-lang/perl-5.24.3-r1
[ebuild R ] dev-libs/openssl-1.0.2o
[ebuild N ] app-admin/passook-20121001
[ebuild R ] net-misc/iputils-20171016_pre
[ebuild N ] dev-libs/libevent-2.1.8
[ebuild N ] dev-libs/nettle-3.4
[ebuild N ] sys-fs/dosfstools-4.0-r1
[ebuild R ] dev-python/pyblake2-1.1.0
[ebuild R ] dev-python/setuptools-36.7.2
[ebuild R ] dev-python/certifi-2017.4.17
[ebuild N ] dev-python/idna-2.5
[ebuild N ] dev-python/PySocks-1.6.7
[ebuild N ] dev-python/six-1.11.0
[ebuild N ] dev-python/pyasn1-0.2.3
[ebuild N ] dev-python/chardet-3.0.4
[ebuild N ] dev-python/asn1crypto-0.24.0
[ebuild N ] dev-python/enum34-1.1.6
[ebuild N ] dev-python/ply-3.9
[ebuild N ] dev-python/ipaddress-1.0.19
[ebuild N ] virtual/python-ipaddress-1.0-r1
[ebuild N ] dev-python/pycparser-2.14
[ebuild N ] sys-apps/sg3_utils-1.42
[ebuild N ] sys-apps/rescan-scsi-bus-1.57-r1
[ebuild N ] sys-apps/sdparm-1.10
[ebuild N ] net-dialup/ppp-2.4.7-r3
[ebuild N ] app-misc/screen-4.4.0
[ebuild N ] net-dialup/rp-pppoe-3.12-r1
[ebuild R ] sys-auth/pambase-20150213-r1
[ebuild R ] net-misc/rsync-3.1.3
[ebuild R ] sys-apps/hwids-20171003
[ebuild R ] dev-libs/libpcre-8.41-r1
[ebuild N ] net-libs/libtirpc-1.0.2-r1
[ebuild N ] net-proxy/dante-1.4.1-r1
[ebuild R ] sys-apps/openrc-0.34.11
[ebuild N ] dev-python/cffi-1.11.4
[ebuild N ] net-misc/curl-7.59.0
[ebuild N ] app-accessibility/brltty-5.2-r1
[ebuild N ] app-admin/hddtemp-0.3_beta15-r26
[ebuild N ] net-misc/dhcpcd-6.11.3
[ebuild N ] net-misc/ntp-4.2.8_p11
[ebuild N ] www-client/links-2.14
[ebuild N ] sys-apps/pciutils-3.4.1
[ebuild N ] dev-python/cryptography-2.1.4
[ebuild N ] net-nds/rpcbind-0.2.4-r3
[ebuild N ] dev-python/pyopenssl-17.5.0
[ebuild N ] sys-libs/libkudzu-1.2.57.1
[ebuild N ] net-fs/nfs-utils-2.3.1-r3
[ebuild N ] dev-python/ndg-httpsclient-0.4.0
[ebuild N ] dev-python/urllib3-1.22
[ebuild N ] sys-apps/hwsetup-1.2-r3
[ebuild N ] dev-python/requests-2.18.4
[ebuild N ] dev-python/ssl-fetch-0.4
[ebuild N ] app-eselect/eselect-lib-bin-symlink-0.1.1
[ebuild N ] app-eselect/eselect-pinentry-0.7
[ebuild N ] dev-libs/libtasn1-4.13
[ebuild N ] virtual/libudev-232
[ebuild N ] sys-apps/usbutils-008-r1
[ebuild R ] sys-apps/util-linux-2.30.2-r1
[ebuild R ] sys-fs/eudev-3.1.5
[ebuild N ] sys-fs/mdadm-3.4
[ebuild R ] sys-apps/sed-4.2.2
[ebuild R ] sys-devel/binutils-2.29.1-r1
[ebuild R ] dev-libs/libxml2-2.9.6
[ebuild N ] sys-fs/lvm2-2.02.145-r2
[ebuild R ] sys-devel/gettext-0.19.8.1
[ebuild R ] dev-libs/libxslt-1.1.30-r2
[ebuild N ] sys-fs/cryptsetup-1.7.5
[ebuild R ] sys-libs/pam-1.2.1-r2
[ebuild R ] net-misc/wget-1.19.1-r2
[ebuild R ] sys-apps/shadow-4.5
[ebuild R ] dev-libs/elfutils-0.170-r1
[ebuild R ] app-arch/tar-1.29-r3
[ebuild R ] dev-libs/glib-2.50.3-r1
[ebuild N ] dev-util/dialog-1.3.20170131
[ebuild N ] sys-libs/binutils-libs-2.29.1-r1
[ebuild N ] app-arch/dpkg-1.19.0.5
[ebuild N ] net-libs/gnutls-3.5.15
[ebuild N ] app-crypt/pinentry-1.0.0-r2
[ebuild N ] sys-fs/xfsprogs-4.14.0
[ebuild N ] sys-devel/binutils-hppa64-2.29.1-r1
[ebuild N ] app-admin/syslog-ng-3.13.2
[ebuild N ] app-crypt/gnupg-2.2.4-r2
[ebuild N ] app-portage/mirrorselect-2.2.3
[ebuild N ] app-text/wgetpaste-2.28
[ebuild N ] dev-util/debootstrap-1.0.89
[ebuild N ] net-irc/irssi-1.0.7
[ebuild N ] app-misc/livecd-tools-2.3
[ebuild N ] sys-devel/kgcc64-6.4.0
[ebuild R ] sys-libs/glibc-2.25-r11
[ebuild R ] sys-devel/gcc-6.4.0-r1
[ebuild R ] sys-apps/iproute2-4.14.1-r2
The following USE changes are necessary to proceed:
(see "package.use" in the portage(5) man page for more details)
# required by dev-python/cryptography-2.1.4::gentoo[-libressl]
# required by dev-python/requests-2.18.4::gentoo[ssl]
# required by dev-python/ssl-fetch-0.4::gentoo
# required by app-portage/mirrorselect-2.2.3::gentoo
# required by app-portage/mirrorselect (argument)
>=dev-libs/openssl-1.0.2o -bindist
# required by net-libs/gnutls-3.5.15::gentoo
# required by app-crypt/gnupg-2.2.4-r2::gentoo[ssl]
# required by app-crypt/gnupg (argument)
>=dev-libs/nettle-3.4 gmp
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180430T071008Z/.catalyst_lock'
Command exited with non-zero status 1
504.22user 214.76system 13:21.08elapsed 89%CPU (0avgtext+0avgdata 61660maxresident)k
0inputs+0outputs (18major+1878426minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180430T071008Z.ENrHxz/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2018-05-30 2:57 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2018-05-30 2:57 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
Warning!!!
The use of -* in livecd/use will cause portage to ignore
package.use in the profile and portage_confdir. You've been warned!
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
Copying livecd-stage1-chroot.sh to /tmp
copying livecd-stage1-chroot.sh to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180513T071007Z//tmp
copying chroot-functions.sh to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180513T071007Z//tmp
Ensure the file has the executable bit set
Running livecd-stage1-chroot.sh in chroot /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180513T071007Z/
>>> Regenerating /etc/ld.so.cache...
Updating portage with USE=""
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.24-r1::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.24-r1::gentoo
emerge --quiet --usepkg --buildpkg --newuse --update --deep --newuse app-accessibility/brltty app-admin/hddtemp app-admin/passook app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-misc/screen app-portage/mirrorselect app-text/wgetpaste dev-util/debootstrap net-analyzer/traceroute net-dialup/mingetty net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-misc/vconfig net-proxy/dante sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/pciutils sys-apps/sdparm sys-apps/usbutils sys-devel/binutils-hppa64 sys-devel/kgcc64 sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/lsscsi sys-fs/cryptsetup sys-fs/lvm2 sys-fs/lsscsi sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links sys-devel/bc app-misc/livecd-tools
[ebuild R ] sys-libs/ncurses-6.1-r2
[ebuild R ] sys-devel/patch-2.7.6-r1
[ebuild N ] sys-apps/hwdata-gentoo-0.4
[ebuild R ] app-arch/unzip-6.0_p21-r2
[ebuild N ] net-dialup/mingetty-1.08-r1
[ebuild N ] sys-devel/autoconf-archive-2017.09.28
[ebuild N ] app-admin/killproc-2.13-r1
[ebuild N ] net-dialup/ppp-scripts-0
[ebuild N ] net-analyzer/netselect-0.3-r3
[ebuild N ] dev-libs/ivykis-0.42.2
[ebuild N ] sys-apps/miscfiles-1.5-r3
[ebuild N ] app-admin/pwgen-2.07
[ebuild N ] net-analyzer/traceroute-2.0.20
[ebuild N ] net-fs/cifs-utils-6.4
[ebuild N ] net-misc/rdate-1.4-r4
[ebuild N ] net-misc/vconfig-1.9
[ebuild N ] sys-apps/hdparm-9.52
[ebuild N ] sys-fs/lsscsi-0.28
[ebuild N ] sys-fs/reiserfsprogs-3.6.25
[ebuild R ] app-arch/xz-utils-5.2.3
[ebuild R ] app-shells/bash-4.4_p12
[ebuild R ] sys-apps/file-5.32
[ebuild N ] dev-libs/libassuan-2.5.1
[ebuild N ] dev-libs/libksba-1.3.5-r1
[ebuild N ] dev-libs/npth-1.3
[ebuild N ] dev-libs/libunistring-0.9.7
[ebuild N ] dev-libs/libusb-1.0.19-r1
[ebuild N ] media-libs/libjpeg-turbo-1.5.0
[ebuild R ] dev-libs/gmp-6.1.2
[ebuild R ] sys-apps/coreutils-8.28-r1
[ebuild N ] media-libs/libpng-1.6.34
[ebuild N ] virtual/libusb-1-r1
[ebuild N ] virtual/jpeg-0-r2
[ebuild N ] sys-apps/ethtool-4.13
[ebuild N ] sys-devel/bc-1.06.95-r2
[ebuild R ] dev-lang/perl-5.24.3-r1
[ebuild R ] dev-libs/openssl-1.0.2o
[ebuild N ] app-admin/passook-20121001
[ebuild R ] net-misc/iputils-20171016_pre
[ebuild N ] dev-libs/libevent-2.1.8
[ebuild N ] dev-libs/nettle-3.4
[ebuild N ] sys-fs/dosfstools-4.0-r1
[ebuild R ] dev-python/pyblake2-1.1.0
[ebuild R ] dev-python/setuptools-36.7.2
[ebuild R ] dev-python/certifi-2017.4.17
[ebuild N ] dev-python/idna-2.5
[ebuild N ] dev-python/PySocks-1.6.7
[ebuild N ] dev-python/six-1.11.0
[ebuild N ] dev-python/pyasn1-0.2.3
[ebuild N ] dev-python/chardet-3.0.4
[ebuild N ] dev-python/asn1crypto-0.24.0
[ebuild N ] dev-python/enum34-1.1.6
[ebuild N ] dev-python/ply-3.9
[ebuild N ] dev-python/ipaddress-1.0.19
[ebuild N ] virtual/python-ipaddress-1.0-r1
[ebuild N ] dev-python/pycparser-2.14
[ebuild N ] sys-apps/sg3_utils-1.42
[ebuild N ] sys-apps/rescan-scsi-bus-1.57-r1
[ebuild N ] sys-apps/sdparm-1.10
[ebuild N ] net-dialup/ppp-2.4.7-r3
[ebuild N ] app-misc/screen-4.4.0
[ebuild N ] net-dialup/rp-pppoe-3.12-r1
[ebuild R ] sys-auth/pambase-20150213-r1
[ebuild R ] net-misc/rsync-3.1.3
[ebuild R ] sys-apps/hwids-20171003
[ebuild R ] dev-libs/libpcre-8.41-r1
[ebuild N ] net-libs/libtirpc-1.0.2-r1
[ebuild N ] net-proxy/dante-1.4.1-r1
[ebuild R ] sys-apps/openrc-0.34.11
[ebuild N ] dev-python/cffi-1.11.4
[ebuild N ] net-misc/curl-7.59.0
[ebuild N ] app-accessibility/brltty-5.2-r1
[ebuild N ] app-admin/hddtemp-0.3_beta15-r26
[ebuild N ] net-misc/dhcpcd-6.11.3
[ebuild N ] net-misc/ntp-4.2.8_p11
[ebuild N ] www-client/links-2.14
[ebuild N ] sys-apps/pciutils-3.4.1
[ebuild N ] dev-python/cryptography-2.1.4
[ebuild N ] net-nds/rpcbind-0.2.4-r3
[ebuild N ] dev-python/pyopenssl-17.5.0
[ebuild N ] sys-libs/libkudzu-1.2.57.1
[ebuild N ] net-fs/nfs-utils-2.3.1-r3
[ebuild N ] dev-python/ndg-httpsclient-0.4.0
[ebuild N ] dev-python/urllib3-1.22
[ebuild N ] sys-apps/hwsetup-1.2-r3
[ebuild N ] dev-python/requests-2.18.4
[ebuild N ] dev-python/ssl-fetch-0.4
[ebuild N ] app-eselect/eselect-lib-bin-symlink-0.1.1
[ebuild N ] app-eselect/eselect-pinentry-0.7
[ebuild N ] dev-libs/libtasn1-4.13
[ebuild N ] virtual/libudev-232
[ebuild N ] sys-apps/usbutils-008-r1
[ebuild R ] sys-apps/util-linux-2.30.2-r1
[ebuild R ] sys-fs/eudev-3.2.5
[ebuild N ] sys-fs/mdadm-3.4
[ebuild R ] sys-apps/sed-4.2.2
[ebuild R ] sys-devel/binutils-2.29.1-r1
[ebuild R ] dev-libs/libxml2-2.9.6
[ebuild N ] sys-fs/lvm2-2.02.145-r2
[ebuild R ] sys-devel/gettext-0.19.8.1
[ebuild R ] dev-libs/libxslt-1.1.32
[ebuild N ] sys-fs/cryptsetup-1.7.5
[ebuild R ] sys-libs/pam-1.2.1-r2
[ebuild R ] net-misc/wget-1.19.5
[ebuild R ] sys-apps/shadow-4.5
[ebuild R ] dev-libs/elfutils-0.170-r1
[ebuild R ] app-arch/tar-1.29-r3
[ebuild R ] dev-libs/glib-2.50.3-r1
[ebuild N ] dev-util/dialog-1.3.20170131
[ebuild N ] sys-libs/binutils-libs-2.29.1-r1
[ebuild N ] app-arch/dpkg-1.19.0.5
[ebuild N ] net-libs/gnutls-3.5.15
[ebuild N ] app-crypt/pinentry-1.0.0-r2
[ebuild N ] sys-fs/xfsprogs-4.14.0
[ebuild N ] sys-devel/binutils-hppa64-2.29.1-r1
[ebuild N ] app-admin/syslog-ng-3.13.2
[ebuild N ] app-crypt/gnupg-2.2.4-r2
[ebuild N ] app-portage/mirrorselect-2.2.3
[ebuild N ] app-text/wgetpaste-2.28
[ebuild N ] dev-util/debootstrap-1.0.89
[ebuild N ] net-irc/irssi-1.0.7
[ebuild N ] app-misc/livecd-tools-2.3
[ebuild N ] sys-devel/kgcc64-6.4.0
[ebuild R ] sys-libs/glibc-2.25-r11
[ebuild R ] sys-devel/gcc-6.4.0-r1
[ebuild R ] sys-apps/iproute2-4.14.1-r2
The following USE changes are necessary to proceed:
(see "package.use" in the portage(5) man page for more details)
# required by dev-python/cryptography-2.1.4::gentoo[-libressl]
# required by dev-python/requests-2.18.4::gentoo[ssl]
# required by dev-python/ssl-fetch-0.4::gentoo
# required by app-portage/mirrorselect-2.2.3::gentoo
# required by app-portage/mirrorselect (argument)
>=dev-libs/openssl-1.0.2o -bindist
# required by net-libs/gnutls-3.5.15::gentoo
# required by app-crypt/gnupg-2.2.4-r2::gentoo[ssl]
# required by app-crypt/gnupg (argument)
>=dev-libs/nettle-3.4 gmp
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180513T071007Z/.catalyst_lock'
Command exited with non-zero status 1
549.27user 215.59system 1:23:35elapsed 15%CPU (0avgtext+0avgdata 61460maxresident)k
0inputs+0outputs (5major+1889587minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180513T071007Z.M0vzCY/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2018-06-09 17:26 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2018-06-09 17:26 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage1.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20180603T071008Z.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20180603T071008Z/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20180603T071008Z/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20180603T071008Z.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Command exited with non-zero status 1
1.19user 0.42system 0:01.65elapsed 97%CPU (0avgtext+0avgdata 11220maxresident)k
0inputs+0outputs (1major+3087minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180603T071008Z.xJbQ7u/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2018-06-21 18:37 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2018-06-21 18:37 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
You have been warned
Warning!!!
The use of -* in livecd/use will cause portage to ignore
package.use in the profile and portage_confdir. You've been warned!
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
Copying livecd-stage1-chroot.sh to /tmp
copying livecd-stage1-chroot.sh to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180610T071008Z//tmp
copying chroot-functions.sh to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180610T071008Z//tmp
Ensure the file has the executable bit set
Running livecd-stage1-chroot.sh in chroot /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180610T071008Z/
>>> Regenerating /etc/ld.so.cache...
Updating portage with USE=""
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.40-r1::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.40-r1::gentoo
emerge --quiet --usepkg --buildpkg --newuse --update --deep --newuse app-accessibility/brltty app-admin/hddtemp app-admin/passook app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-misc/screen app-portage/mirrorselect app-text/wgetpaste dev-util/debootstrap net-analyzer/traceroute net-dialup/mingetty net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-misc/vconfig net-proxy/dante sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/pciutils sys-apps/sdparm sys-apps/usbutils sys-devel/binutils-hppa64 sys-devel/kgcc64 sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/lsscsi sys-fs/cryptsetup sys-fs/lvm2 sys-fs/lsscsi sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links sys-devel/bc app-misc/livecd-tools
[ebuild R ] sys-libs/ncurses-6.1-r2
[ebuild R ] sys-devel/patch-2.7.6-r1
[ebuild N ] sys-apps/hwdata-gentoo-0.4
[ebuild R ] app-arch/unzip-6.0_p21-r2
[ebuild N ] net-dialup/mingetty-1.08-r1
[ebuild N ] sys-devel/autoconf-archive-2018.03.13
[ebuild N ] app-admin/killproc-2.13-r1
[ebuild N ] net-dialup/ppp-scripts-0
[ebuild N ] net-analyzer/netselect-0.3-r3
[ebuild N ] dev-libs/ivykis-0.42.2
[ebuild N ] sys-apps/miscfiles-1.5-r3
[ebuild N ] app-admin/pwgen-2.07
[ebuild N ] net-analyzer/traceroute-2.0.20
[ebuild N ] net-fs/cifs-utils-6.4
[ebuild N ] net-misc/rdate-1.4-r4
[ebuild N ] net-misc/vconfig-1.9
[ebuild N ] sys-apps/hdparm-9.52
[ebuild N ] sys-fs/lsscsi-0.28
[ebuild N ] sys-fs/reiserfsprogs-3.6.25
[ebuild R ] app-arch/xz-utils-5.2.3
[ebuild R ] app-shells/bash-4.4_p12
[ebuild R ] sys-apps/file-5.32-r1
[ebuild N ] dev-libs/libassuan-2.5.1
[ebuild N ] dev-libs/libksba-1.3.5-r1
[ebuild N ] dev-libs/npth-1.3
[ebuild N ] dev-libs/libunistring-0.9.7
[ebuild N ] dev-libs/libusb-1.0.22
[ebuild N ] media-libs/libjpeg-turbo-1.5.0
[ebuild R ] dev-libs/gmp-6.1.2
[ebuild R ] sys-apps/coreutils-8.28-r1
[ebuild N ] media-libs/libpng-1.6.34
[ebuild N ] net-libs/rpcsvc-proto-0
[ebuild N ] virtual/libusb-1-r1
[ebuild N ] virtual/jpeg-0-r2
[ebuild N ] sys-apps/ethtool-4.13
[ebuild N ] sys-devel/bc-1.06.95-r2
[ebuild R ] dev-lang/perl-5.24.3-r1
[ebuild R ] dev-libs/openssl-1.0.2o-r3
[ebuild N ] app-admin/passook-20121001
[ebuild R ] net-misc/iputils-20171016_pre
[ebuild N ] dev-libs/libevent-2.1.8
[ebuild N ] dev-libs/nettle-3.4
[ebuild N ] sys-fs/dosfstools-4.0-r1
[ebuild R ] dev-python/pyblake2-1.1.0
[ebuild R ] dev-python/setuptools-36.7.2
[ebuild R ] dev-python/certifi-2018.4.16
[ebuild N ] dev-python/idna-2.5
[ebuild N ] dev-python/PySocks-1.6.7
[ebuild N ] dev-python/six-1.11.0
[ebuild N ] dev-python/pyasn1-0.2.3
[ebuild N ] dev-python/chardet-3.0.4
[ebuild N ] dev-python/asn1crypto-0.24.0
[ebuild N ] dev-python/enum34-1.1.6
[ebuild N ] dev-python/ply-3.9
[ebuild N ] dev-python/ipaddress-1.0.19
[ebuild N ] virtual/python-ipaddress-1.0-r1
[ebuild N ] dev-python/pycparser-2.14
[ebuild N ] sys-apps/sg3_utils-1.42
[ebuild N ] sys-apps/rescan-scsi-bus-1.57-r1
[ebuild N ] sys-apps/sdparm-1.10
[ebuild N ] net-dialup/ppp-2.4.7-r3
[ebuild N ] app-misc/screen-4.6.1
[ebuild N ] net-dialup/rp-pppoe-3.12-r1
[ebuild R ] sys-auth/pambase-20150213-r1
[ebuild R ] sys-apps/iproute2-4.14.1-r2
[ebuild R ] net-misc/rsync-3.1.3
[ebuild R ] dev-libs/libpcre-8.41-r1
[ebuild R ] sys-apps/hwids-20171003
[ebuild N ] net-libs/libtirpc-1.0.2-r1
[ebuild N ] net-proxy/dante-1.4.1-r1
[ebuild R ] sys-apps/openrc-0.34.11
[ebuild N ] dev-python/cffi-1.11.4
[ebuild N ] net-misc/curl-7.60.0
[ebuild N ] app-accessibility/brltty-5.2-r1
[ebuild N ] app-admin/hddtemp-0.3_beta15-r26
[ebuild N ] net-misc/dhcpcd-6.11.3
[ebuild N ] net-misc/ntp-4.2.8_p11
[ebuild N ] sys-apps/pciutils-3.4.1
[ebuild N ] dev-python/cryptography-2.1.4-r1
[ebuild N ] net-nds/rpcbind-0.2.4-r3
[ebuild N ] dev-python/pyopenssl-17.5.0
[ebuild N ] sys-libs/libkudzu-1.2.57.1
[ebuild N ] net-fs/nfs-utils-2.3.1-r3
[ebuild N ] dev-python/ndg-httpsclient-0.4.0
[ebuild N ] dev-python/urllib3-1.22
[ebuild N ] sys-apps/hwsetup-1.2-r3
[ebuild N ] dev-python/requests-2.18.4
[ebuild N ] dev-python/ssl-fetch-0.4
[ebuild N ] app-eselect/eselect-lib-bin-symlink-0.1.1
[ebuild N ] app-eselect/eselect-pinentry-0.7
[ebuild N ] dev-libs/libtasn1-4.13
[ebuild N ] virtual/libudev-232
[ebuild N ] sys-apps/usbutils-008-r1
[ebuild R ] sys-apps/util-linux-2.30.2-r1
[ebuild R ] sys-fs/eudev-3.2.5
[ebuild N ] sys-fs/mdadm-3.4
[ebuild R ] sys-apps/sed-4.2.2
[ebuild R ] sys-devel/binutils-2.29.1-r1
[ebuild R ] dev-libs/libxml2-2.9.6
[ebuild N ] sys-fs/lvm2-2.02.145-r2
[ebuild R ] sys-devel/gettext-0.19.8.1
[ebuild R ] dev-libs/libxslt-1.1.32
[ebuild N ] sys-fs/cryptsetup-1.7.5
[ebuild R ] sys-libs/pam-1.2.1-r2
[ebuild R ] net-misc/wget-1.19.5
[ebuild R ] sys-apps/shadow-4.6
[ebuild R ] dev-libs/elfutils-0.170-r1
[ebuild R ] app-arch/tar-1.29-r3
[ebuild R ] sys-devel/gcc-6.4.0-r1
[ebuild R ] dev-libs/glib-2.50.3-r1
[ebuild N ] dev-util/dialog-1.3.20170131
[ebuild N ] sys-libs/binutils-libs-2.29.1-r1
[ebuild N ] app-arch/dpkg-1.19.0.5
[ebuild N ] net-libs/gnutls-3.5.15
[ebuild N ] app-crypt/pinentry-1.0.0-r2
[ebuild N ] sys-fs/xfsprogs-4.14.0
[ebuild N ] sys-devel/binutils-hppa64-2.29.1-r1
[ebuild N ] dev-util/desktop-file-utils-0.23
[ebuild N ] app-admin/syslog-ng-3.13.2
[ebuild N ] app-crypt/gnupg-2.2.4-r2
[ebuild N ] app-portage/mirrorselect-2.2.3
[ebuild N ] app-text/wgetpaste-2.28
[ebuild N ] dev-util/debootstrap-1.0.89
[ebuild N ] net-irc/irssi-1.0.7
[ebuild N ] app-misc/livecd-tools-2.4
[ebuild N ] sys-devel/kgcc64-6.4.0
[ebuild N ] www-client/links-2.14-r1
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by virtual/libusb-1-r1::gentoo
# required by sys-apps/usbutils-008-r1::gentoo
# required by sys-apps/usbutils (argument)
=dev-libs/libusb-1.0.22 ~hppa
The following USE changes are necessary to proceed:
(see "package.use" in the portage(5) man page for more details)
# required by net-libs/gnutls-3.5.15::gentoo
# required by app-crypt/gnupg-2.2.4-r2::gentoo[ssl]
# required by app-crypt/gnupg (argument)
>=dev-libs/nettle-3.4 gmp
# required by dev-python/cryptography-2.1.4-r1::gentoo[-libressl]
# required by dev-python/requests-2.18.4::gentoo[ssl]
# required by dev-python/ssl-fetch-0.4::gentoo
# required by app-portage/mirrorselect-2.2.3::gentoo
# required by app-portage/mirrorselect (argument)
>=dev-libs/openssl-1.0.2o-r3 -bindist
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180610T071008Z/.catalyst_lock'
Command exited with non-zero status 1
504.94user 220.28system 13:28.99elapsed 89%CPU (0avgtext+0avgdata 60652maxresident)k
0inputs+0outputs (18major+1961238minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180610T071008Z.cn1WE2/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2018-07-04 20:29 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2018-07-04 20:29 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
You have been warned
Warning!!!
The use of -* in livecd/use will cause portage to ignore
package.use in the profile and portage_confdir. You've been warned!
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
Copying livecd-stage1-chroot.sh to /tmp
copying livecd-stage1-chroot.sh to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180623T071007Z//tmp
copying chroot-functions.sh to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180623T071007Z//tmp
Ensure the file has the executable bit set
Running livecd-stage1-chroot.sh in chroot /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180623T071007Z/
>>> Regenerating /etc/ld.so.cache...
Updating portage with USE=""
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.40-r1::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.40-r1::gentoo
emerge --quiet --usepkg --buildpkg --newuse --update --deep --newuse app-accessibility/brltty app-admin/hddtemp app-admin/passook app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-misc/screen app-portage/mirrorselect app-text/wgetpaste dev-util/debootstrap net-analyzer/traceroute net-dialup/mingetty net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-misc/vconfig net-proxy/dante sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/pciutils sys-apps/sdparm sys-apps/usbutils sys-devel/binutils-hppa64 sys-devel/kgcc64 sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/lsscsi sys-fs/cryptsetup sys-fs/lvm2 sys-fs/lsscsi sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links sys-devel/bc app-misc/livecd-tools
[ebuild R ] sys-libs/ncurses-6.1-r2
[ebuild R ] sys-devel/patch-2.7.6-r1
[ebuild N ] sys-apps/hwdata-gentoo-0.4
[ebuild R ] app-arch/unzip-6.0_p21-r2
[ebuild N ] net-dialup/mingetty-1.08-r1
[ebuild N ] sys-devel/autoconf-archive-2018.03.13
[ebuild N ] app-admin/killproc-2.13-r1
[ebuild N ] net-dialup/ppp-scripts-0
[ebuild N ] net-analyzer/netselect-0.3-r3
[ebuild N ] dev-libs/ivykis-0.42.2
[ebuild N ] sys-apps/miscfiles-1.5-r3
[ebuild N ] app-admin/pwgen-2.07
[ebuild N ] net-analyzer/traceroute-2.0.20
[ebuild N ] net-fs/cifs-utils-6.4
[ebuild N ] net-misc/rdate-1.4-r4
[ebuild N ] net-misc/vconfig-1.9
[ebuild N ] sys-apps/hdparm-9.52
[ebuild N ] sys-fs/lsscsi-0.28
[ebuild N ] sys-fs/reiserfsprogs-3.6.25
[ebuild R ] app-arch/xz-utils-5.2.3
[ebuild R ] app-shells/bash-4.4_p12
[ebuild R ] sys-apps/file-5.33-r2
[ebuild N ] dev-libs/libassuan-2.5.1
[ebuild N ] dev-libs/libksba-1.3.5-r1
[ebuild N ] dev-libs/npth-1.3
[ebuild N ] dev-libs/libunistring-0.9.7
[ebuild N ] dev-libs/libusb-1.0.22
[ebuild N ] media-libs/libjpeg-turbo-1.5.0
[ebuild R ] dev-libs/gmp-6.1.2
[ebuild R ] sys-apps/coreutils-8.28-r1
[ebuild N ] media-libs/libpng-1.6.34
[ebuild N ] net-libs/rpcsvc-proto-0
[ebuild N ] virtual/libusb-1-r1
[ebuild N ] virtual/jpeg-0-r2
[ebuild N ] sys-apps/ethtool-4.13
[ebuild N ] sys-devel/bc-1.06.95-r2
[ebuild R ] dev-lang/perl-5.24.3-r1
[ebuild R ] dev-libs/openssl-1.0.2o-r3
[ebuild N ] app-admin/passook-20121001
[ebuild R ] net-misc/iputils-20171016_pre
[ebuild N ] dev-libs/libevent-2.1.8
[ebuild N ] dev-libs/nettle-3.4
[ebuild N ] sys-fs/dosfstools-4.0-r1
[ebuild R ] dev-python/pyblake2-1.1.0
[ebuild R ] dev-python/setuptools-36.7.2
[ebuild R ] dev-python/certifi-2018.4.16
[ebuild N ] dev-python/idna-2.5
[ebuild N ] dev-python/PySocks-1.6.7
[ebuild N ] dev-python/six-1.11.0
[ebuild N ] dev-python/pyasn1-0.2.3
[ebuild N ] dev-python/chardet-3.0.4
[ebuild N ] dev-python/asn1crypto-0.24.0
[ebuild N ] dev-python/enum34-1.1.6
[ebuild N ] dev-python/ply-3.9
[ebuild N ] dev-python/ipaddress-1.0.19
[ebuild N ] virtual/python-ipaddress-1.0-r1
[ebuild N ] dev-python/pycparser-2.14
[ebuild N ] sys-apps/sg3_utils-1.42
[ebuild N ] sys-apps/rescan-scsi-bus-1.57-r1
[ebuild N ] sys-apps/sdparm-1.10
[ebuild N ] net-dialup/ppp-2.4.7-r6
[ebuild N ] app-misc/screen-4.6.1
[ebuild N ] net-dialup/rp-pppoe-3.12-r1
[ebuild R ] sys-auth/pambase-20150213-r1
[ebuild R ] sys-apps/iproute2-4.14.1-r2
[ebuild R ] net-misc/rsync-3.1.3
[ebuild R ] dev-libs/libpcre-8.41-r1
[ebuild R ] sys-apps/hwids-20171003
[ebuild N ] net-libs/libtirpc-1.0.2-r1
[ebuild N ] net-proxy/dante-1.4.1-r1
[ebuild R ] sys-apps/openrc-0.34.11
[ebuild N ] dev-python/cffi-1.11.4
[ebuild N ] net-misc/curl-7.60.0
[ebuild N ] app-accessibility/brltty-5.2-r1
[ebuild N ] app-admin/hddtemp-0.3_beta15-r26
[ebuild N ] net-misc/dhcpcd-6.11.3
[ebuild N ] net-misc/ntp-4.2.8_p11
[ebuild N ] sys-apps/pciutils-3.4.1
[ebuild N ] dev-python/cryptography-2.1.4-r1
[ebuild N ] net-nds/rpcbind-0.2.4-r3
[ebuild N ] dev-python/pyopenssl-17.5.0
[ebuild N ] sys-libs/libkudzu-1.2.57.1
[ebuild N ] net-fs/nfs-utils-2.3.1-r3
[ebuild N ] dev-python/ndg-httpsclient-0.4.0
[ebuild N ] dev-python/urllib3-1.22
[ebuild N ] sys-apps/hwsetup-1.2-r3
[ebuild N ] dev-python/requests-2.18.4
[ebuild N ] dev-python/ssl-fetch-0.4
[ebuild N ] app-eselect/eselect-lib-bin-symlink-0.1.1
[ebuild N ] app-eselect/eselect-pinentry-0.7
[ebuild N ] dev-libs/libtasn1-4.13
[ebuild N ] virtual/libudev-232
[ebuild N ] sys-apps/usbutils-008-r1
[ebuild R ] sys-apps/util-linux-2.30.2-r1
[ebuild R ] sys-fs/eudev-3.2.5
[ebuild N ] sys-fs/mdadm-3.4
[ebuild R ] sys-apps/sed-4.2.2
[ebuild R ] sys-devel/binutils-2.29.1-r1
[ebuild R ] dev-libs/libxml2-2.9.6
[ebuild N ] sys-fs/lvm2-2.02.145-r2
[ebuild R ] sys-devel/gettext-0.19.8.1
[ebuild R ] dev-libs/libxslt-1.1.32
[ebuild N ] sys-fs/cryptsetup-1.7.5
[ebuild R ] sys-libs/pam-1.2.1-r2
[ebuild R ] net-misc/wget-1.19.5
[ebuild R ] sys-apps/shadow-4.6
[ebuild R ] dev-libs/elfutils-0.170-r1
[ebuild R ] app-arch/tar-1.29-r3
[ebuild R ] sys-devel/gcc-6.4.0-r1
[ebuild R ] dev-libs/glib-2.50.3-r1
[ebuild N ] dev-util/dialog-1.3.20170131
[ebuild N ] sys-libs/binutils-libs-2.29.1-r1
[ebuild N ] app-arch/dpkg-1.19.0.5
[ebuild N ] net-libs/gnutls-3.5.15
[ebuild N ] app-crypt/pinentry-1.0.0-r2
[ebuild N ] sys-fs/xfsprogs-4.14.0
[ebuild N ] sys-devel/binutils-hppa64-2.29.1-r1
[ebuild N ] dev-util/desktop-file-utils-0.23
[ebuild N ] app-admin/syslog-ng-3.13.2
[ebuild N ] app-crypt/gnupg-2.2.4-r2
[ebuild N ] app-portage/mirrorselect-2.2.3
[ebuild N ] app-text/wgetpaste-2.28
[ebuild N ] dev-util/debootstrap-1.0.89
[ebuild N ] net-irc/irssi-1.0.7
[ebuild N ] app-misc/livecd-tools-2.4
[ebuild N ] sys-devel/kgcc64-6.4.0
[ebuild N ] www-client/links-2.14-r1
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by virtual/libusb-1-r1::gentoo
# required by sys-apps/usbutils-008-r1::gentoo
# required by sys-apps/usbutils (argument)
=dev-libs/libusb-1.0.22 ~hppa
The following USE changes are necessary to proceed:
(see "package.use" in the portage(5) man page for more details)
# required by net-libs/gnutls-3.5.15::gentoo
# required by app-crypt/gnupg-2.2.4-r2::gentoo[ssl]
# required by app-crypt/gnupg (argument)
>=dev-libs/nettle-3.4 gmp
# required by dev-python/cryptography-2.1.4-r1::gentoo[-libressl]
# required by dev-python/requests-2.18.4::gentoo[ssl]
# required by dev-python/ssl-fetch-0.4::gentoo
# required by app-portage/mirrorselect-2.2.3::gentoo
# required by app-portage/mirrorselect (argument)
>=dev-libs/openssl-1.0.2o-r3 -bindist
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180623T071007Z/.catalyst_lock'
Command exited with non-zero status 1
510.33user 220.33system 13:25.65elapsed 90%CPU (0avgtext+0avgdata 61660maxresident)k
0inputs+0outputs (19major+1955109minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180623T071007Z.WZfrjW/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2018-07-18 6:46 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2018-07-18 6:46 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Warning!!!
The use of -* in livecd/use will cause portage to ignore
package.use in the profile and portage_confdir. You've been warned!
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
Copying livecd-stage1-chroot.sh to /tmp
copying livecd-stage1-chroot.sh to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180706T071008Z//tmp
copying chroot-functions.sh to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180706T071008Z//tmp
Ensure the file has the executable bit set
Running livecd-stage1-chroot.sh in chroot /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180706T071008Z/
>>> Regenerating /etc/ld.so.cache...
Updating portage with USE=""
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.40-r1::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.40-r1::gentoo
emerge --quiet --usepkg --buildpkg --newuse --update --deep --newuse app-accessibility/brltty app-admin/hddtemp app-admin/passook app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-misc/screen app-portage/mirrorselect app-text/wgetpaste dev-util/debootstrap net-analyzer/traceroute net-dialup/mingetty net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-misc/vconfig net-proxy/dante sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/pciutils sys-apps/sdparm sys-apps/usbutils sys-devel/binutils-hppa64 sys-devel/kgcc64 sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/lsscsi sys-fs/cryptsetup sys-fs/lvm2 sys-fs/lsscsi sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links sys-devel/bc app-misc/livecd-tools
[ebuild R ] sys-libs/ncurses-6.1-r2
[ebuild N ] sys-apps/hwdata-gentoo-0.4
[ebuild R ] app-arch/unzip-6.0_p21-r2
[ebuild N ] net-dialup/mingetty-1.08-r1
[ebuild N ] sys-devel/autoconf-archive-2018.03.13
[ebuild N ] app-admin/killproc-2.13-r1
[ebuild N ] net-dialup/ppp-scripts-0
[ebuild N ] net-analyzer/netselect-0.3-r3
[ebuild N ] dev-libs/ivykis-0.42.2
[ebuild N ] sys-apps/miscfiles-1.5-r3
[ebuild N ] app-admin/pwgen-2.07
[ebuild N ] net-analyzer/traceroute-2.0.20
[ebuild N ] net-fs/cifs-utils-6.4
[ebuild N ] net-misc/rdate-1.4-r4
[ebuild N ] net-misc/vconfig-1.9
[ebuild N ] sys-apps/hdparm-9.52
[ebuild N ] sys-fs/lsscsi-0.28
[ebuild N ] sys-fs/reiserfsprogs-3.6.25
[ebuild R ] app-arch/xz-utils-5.2.3
[ebuild R ] app-shells/bash-4.4_p12
[ebuild R ] sys-apps/file-5.33-r2
[ebuild N ] dev-libs/libassuan-2.5.1
[ebuild N ] dev-libs/libksba-1.3.5-r1
[ebuild N ] dev-libs/npth-1.3
[ebuild N ] dev-libs/libunistring-0.9.7
[ebuild N ] dev-libs/libusb-1.0.22
[ebuild N ] media-libs/libjpeg-turbo-1.5.0
[ebuild R ] dev-libs/gmp-6.1.2
[ebuild R ] sys-apps/coreutils-8.28-r1
[ebuild N ] media-libs/libpng-1.6.34
[ebuild N ] net-libs/rpcsvc-proto-0
[ebuild N ] virtual/libusb-1-r1
[ebuild N ] virtual/jpeg-0-r2
[ebuild N ] sys-apps/ethtool-4.13
[ebuild N ] sys-devel/bc-1.06.95-r2
[ebuild R ] dev-lang/perl-5.24.3-r1
[ebuild R ] dev-libs/openssl-1.0.2o-r3
[ebuild N ] app-admin/passook-20121001
[ebuild R ] net-misc/iputils-20171016_pre
[ebuild N ] dev-libs/libevent-2.1.8
[ebuild N ] dev-libs/nettle-3.4
[ebuild N ] sys-fs/dosfstools-4.0-r1
[ebuild R ] dev-python/pyblake2-1.1.0
[ebuild R ] dev-python/setuptools-36.7.2
[ebuild R ] dev-python/certifi-2018.4.16
[ebuild N ] dev-python/idna-2.5
[ebuild N ] dev-python/PySocks-1.6.7
[ebuild N ] dev-python/six-1.11.0
[ebuild N ] dev-python/pyasn1-0.2.3
[ebuild N ] dev-python/chardet-3.0.4
[ebuild N ] dev-python/asn1crypto-0.24.0
[ebuild N ] dev-python/enum34-1.1.6
[ebuild N ] dev-python/ply-3.9
[ebuild N ] dev-python/ipaddress-1.0.19
[ebuild N ] virtual/python-ipaddress-1.0-r1
[ebuild N ] dev-python/pycparser-2.14
[ebuild N ] sys-apps/sg3_utils-1.42
[ebuild N ] sys-apps/rescan-scsi-bus-1.57-r1
[ebuild N ] sys-apps/sdparm-1.10
[ebuild N ] net-dialup/ppp-2.4.7-r6
[ebuild N ] app-misc/screen-4.6.1
[ebuild N ] net-dialup/rp-pppoe-3.12-r1
[ebuild R ] sys-auth/pambase-20150213-r1
[ebuild R ] sys-apps/iproute2-4.14.1-r2
[ebuild R ] net-misc/rsync-3.1.3
[ebuild R ] dev-libs/libpcre-8.41-r1
[ebuild R ] sys-apps/hwids-20171003
[ebuild N ] net-libs/libtirpc-1.0.2-r1
[ebuild N ] net-proxy/dante-1.4.1-r1
[ebuild R ] sys-apps/openrc-0.34.11
[ebuild N ] dev-python/cffi-1.11.4
[ebuild N ] net-misc/curl-7.60.0
[ebuild N ] app-accessibility/brltty-5.2-r1
[ebuild N ] app-admin/hddtemp-0.3_beta15-r26
[ebuild N ] net-misc/dhcpcd-6.11.3
[ebuild N ] net-misc/ntp-4.2.8_p11
[ebuild N ] sys-apps/pciutils-3.4.1
[ebuild N ] dev-python/cryptography-2.1.4-r1
[ebuild N ] net-nds/rpcbind-0.2.4-r3
[ebuild N ] dev-python/pyopenssl-17.5.0
[ebuild N ] sys-libs/libkudzu-1.2.57.1
[ebuild N ] net-fs/nfs-utils-2.3.1-r3
[ebuild N ] dev-python/ndg-httpsclient-0.4.0
[ebuild N ] dev-python/urllib3-1.22
[ebuild N ] sys-apps/hwsetup-1.2-r3
[ebuild N ] dev-python/requests-2.18.4
[ebuild N ] dev-python/ssl-fetch-0.4
[ebuild N ] app-eselect/eselect-lib-bin-symlink-0.1.1
[ebuild N ] app-eselect/eselect-pinentry-0.7
[ebuild N ] dev-libs/libtasn1-4.13
[ebuild N ] virtual/libudev-232
[ebuild N ] sys-apps/usbutils-008-r1
[ebuild R ] sys-apps/util-linux-2.30.2-r1
[ebuild R ] sys-fs/eudev-3.2.5
[ebuild N ] sys-fs/mdadm-3.4
[ebuild R ] sys-apps/sed-4.5
[ebuild R ] sys-devel/binutils-2.30-r2
[ebuild R ] dev-libs/libxml2-2.9.6
[ebuild N ] sys-fs/lvm2-2.02.145-r2
[ebuild R ] sys-devel/gettext-0.19.8.1
[ebuild R ] dev-libs/libxslt-1.1.32
[ebuild N ] sys-fs/cryptsetup-1.7.5
[ebuild R ] sys-libs/pam-1.2.1-r2
[ebuild R ] net-misc/wget-1.19.5
[ebuild R ] sys-apps/shadow-4.6
[ebuild R ] dev-libs/elfutils-0.170-r1
[ebuild R ] app-arch/tar-1.30
[ebuild R ] sys-devel/gcc-6.4.0-r1
[ebuild R ] dev-libs/glib-2.52.3
[ebuild N ] dev-util/dialog-1.3.20170131
[ebuild N ] sys-libs/binutils-libs-2.30-r2
[ebuild N ] app-arch/dpkg-1.19.0.5
[ebuild N ] net-libs/gnutls-3.5.18
[ebuild N ] app-crypt/pinentry-1.0.0-r2
[ebuild N ] sys-fs/xfsprogs-4.14.0
[ebuild N ] sys-devel/binutils-hppa64-2.30-r2
[ebuild N ] dev-util/desktop-file-utils-0.23
[ebuild N ] app-admin/syslog-ng-3.13.2
[ebuild N ] app-crypt/gnupg-2.2.4-r2
[ebuild N ] app-portage/mirrorselect-2.2.3
[ebuild N ] app-text/wgetpaste-2.28
[ebuild N ] dev-util/debootstrap-1.0.89
[ebuild N ] net-irc/irssi-1.0.7
[ebuild N ] app-misc/livecd-tools-2.4
[ebuild N ] sys-devel/kgcc64-6.4.0
[ebuild N ] www-client/links-2.14-r1
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-crypt/gnupg-2.2.4-r2::gentoo[ssl]
# required by app-crypt/gnupg (argument)
=net-libs/gnutls-3.5.18 ~hppa
# required by virtual/libusb-1-r1::gentoo
# required by sys-apps/usbutils-008-r1::gentoo
# required by sys-apps/usbutils (argument)
=dev-libs/libusb-1.0.22 ~hppa
The following USE changes are necessary to proceed:
(see "package.use" in the portage(5) man page for more details)
# required by net-libs/gnutls-3.5.18::gentoo
# required by app-crypt/gnupg-2.2.4-r2::gentoo[ssl]
# required by app-crypt/gnupg (argument)
>=dev-libs/nettle-3.4 gmp
# required by dev-python/cryptography-2.1.4-r1::gentoo[-libressl]
# required by dev-python/requests-2.18.4::gentoo[ssl]
# required by dev-python/ssl-fetch-0.4::gentoo
# required by app-portage/mirrorselect-2.2.3::gentoo
# required by app-portage/mirrorselect (argument)
>=dev-libs/openssl-1.0.2o-r3 -bindist
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180706T071008Z/.catalyst_lock'
Command exited with non-zero status 1
512.18user 222.34system 15:31.42elapsed 78%CPU (0avgtext+0avgdata 61808maxresident)k
0inputs+0outputs (17major+1960936minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180706T071008Z.9Ddck5/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2018-08-03 17:16 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2018-08-03 17:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage1.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20180722T071014Z.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20180722T071014Z/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20180722T071014Z/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20180722T071014Z.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Command exited with non-zero status 1
1.20user 0.40system 0:01.66elapsed 96%CPU (0avgtext+0avgdata 11160maxresident)k
0inputs+0outputs (0major+3102minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180722T071014Z.t6CHVu/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2018-09-08 3:05 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2018-09-08 3:05 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
Warning!!!
The use of -* in livecd/use will cause portage to ignore
package.use in the profile and portage_confdir. You've been warned!
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
Copying livecd-stage1-chroot.sh to /tmp
copying livecd-stage1-chroot.sh to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180822T131132Z//tmp
copying chroot-functions.sh to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180822T131132Z//tmp
Ensure the file has the executable bit set
Running livecd-stage1-chroot.sh in chroot /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180822T131132Z/
>>> Regenerating /etc/ld.so.cache...
Updating portage with USE=""
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.40-r1::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.40-r1::gentoo
emerge --quiet --usepkg --buildpkg --newuse --update --deep --newuse app-accessibility/brltty app-admin/hddtemp app-admin/passook app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-misc/screen app-portage/mirrorselect app-text/wgetpaste dev-util/debootstrap net-analyzer/traceroute net-dialup/mingetty net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-misc/vconfig net-proxy/dante sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/pciutils sys-apps/sdparm sys-apps/usbutils sys-devel/binutils-hppa64 sys-devel/kgcc64 sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/lsscsi sys-fs/cryptsetup sys-fs/lvm2 sys-fs/lsscsi sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links sys-devel/bc app-misc/livecd-tools
[ebuild R ] sys-libs/ncurses-6.1-r2
[ebuild N ] sys-apps/hwdata-gentoo-0.4
[ebuild R ] app-arch/unzip-6.0_p21-r2
[ebuild N ] net-dialup/mingetty-1.08-r1
[ebuild N ] sys-devel/autoconf-archive-2018.03.13
[ebuild N ] app-admin/killproc-2.13-r1
[ebuild N ] net-dialup/ppp-scripts-0
[ebuild N ] net-analyzer/netselect-0.3-r3
[ebuild N ] dev-libs/ivykis-0.42.2
[ebuild N ] sys-apps/miscfiles-1.5-r3
[ebuild N ] app-admin/pwgen-2.07
[ebuild N ] net-analyzer/traceroute-2.0.20
[ebuild N ] net-fs/cifs-utils-6.4
[ebuild N ] net-misc/rdate-1.4-r4
[ebuild N ] net-misc/vconfig-1.9
[ebuild N ] sys-apps/hdparm-9.52
[ebuild N ] sys-fs/lsscsi-0.28
[ebuild N ] sys-fs/reiserfsprogs-3.6.25
[ebuild R ] app-arch/xz-utils-5.2.3
[ebuild R ] app-shells/bash-4.4_p12
[ebuild R ] sys-apps/file-5.33-r4
[ebuild N ] dev-libs/libusb-1.0.22
[ebuild N ] media-libs/libjpeg-turbo-1.5.0
[ebuild R ] dev-libs/gmp-6.1.2
[ebuild R ] sys-apps/coreutils-8.29-r1
[ebuild N ] media-libs/libpng-1.6.34
[ebuild N ] net-libs/rpcsvc-proto-0
[ebuild N ] virtual/libusb-1-r1
[ebuild N ] virtual/jpeg-0-r2
[ebuild N ] sys-apps/ethtool-4.13
[ebuild N ] sys-devel/bc-1.06.95-r2
[ebuild R ] dev-lang/perl-5.24.3-r1
[ebuild R ] dev-libs/openssl-1.0.2o-r3
[ebuild N ] app-admin/passook-20121001
[ebuild R ] net-misc/iputils-20171016_pre
[ebuild N ] dev-libs/libevent-2.1.8
[ebuild N ] sys-fs/dosfstools-4.0-r1
[ebuild R ] dev-python/setuptools-36.7.2
[ebuild R ] dev-python/certifi-2018.4.16
[ebuild N ] dev-python/idna-2.5
[ebuild N ] dev-python/PySocks-1.6.7
[ebuild N ] dev-python/six-1.11.0
[ebuild N ] dev-python/pyasn1-0.2.3
[ebuild N ] dev-python/chardet-3.0.4
[ebuild N ] dev-python/asn1crypto-0.24.0
[ebuild N ] dev-python/enum34-1.1.6
[ebuild N ] dev-python/ply-3.9
[ebuild N ] dev-python/ipaddress-1.0.19
[ebuild R ] dev-python/pyblake2-1.1.2
[ebuild N ] virtual/python-ipaddress-1.0-r1
[ebuild N ] dev-python/pycparser-2.14
[ebuild N ] sys-apps/sg3_utils-1.42
[ebuild N ] sys-apps/rescan-scsi-bus-1.57-r1
[ebuild N ] sys-apps/sdparm-1.10
[ebuild N ] net-dialup/ppp-2.4.7-r6
[ebuild N ] app-misc/screen-4.6.1
[ebuild N ] net-dialup/rp-pppoe-3.12-r1
[ebuild R ] sys-auth/pambase-20150213-r1
[ebuild R ] sys-apps/iproute2-4.14.1-r2
[ebuild R ] net-misc/rsync-3.1.3
[ebuild R ] dev-libs/libpcre-8.41-r1
[ebuild R ] sys-apps/hwids-20171003
[ebuild N ] net-libs/libtirpc-1.0.2-r1
[ebuild N ] net-proxy/dante-1.4.1-r1
[ebuild R ] sys-apps/openrc-0.34.11
[ebuild N ] dev-python/cffi-1.11.4
[ebuild N ] app-accessibility/brltty-5.2-r1
[ebuild N ] app-admin/hddtemp-0.3_beta15-r26
[ebuild N ] net-misc/dhcpcd-6.11.3
[ebuild N ] net-misc/ntp-4.2.8_p11
[ebuild N ] sys-apps/pciutils-3.5.6
[ebuild N ] dev-python/cryptography-2.2.2-r1
[ebuild N ] net-nds/rpcbind-0.2.4-r3
[ebuild N ] dev-python/pyopenssl-17.5.0
[ebuild N ] sys-libs/libkudzu-1.2.57.1
[ebuild N ] net-fs/nfs-utils-2.3.1-r3
[ebuild N ] dev-python/ndg-httpsclient-0.4.0
[ebuild N ] dev-python/urllib3-1.22
[ebuild N ] sys-apps/hwsetup-1.2-r3
[ebuild N ] dev-python/requests-2.18.4-r1
[ebuild N ] dev-python/ssl-fetch-0.4
[ebuild N ] virtual/libudev-232
[ebuild N ] sys-apps/usbutils-008-r1
[ebuild R ] sys-apps/util-linux-2.32-r4
[ebuild R ] sys-fs/eudev-3.2.5
[ebuild N ] sys-fs/mdadm-3.4
[ebuild R ] sys-apps/sed-4.5
[ebuild R ] sys-devel/binutils-2.30-r2
[ebuild R ] dev-libs/libxml2-2.9.8
[ebuild N ] sys-fs/lvm2-2.02.145-r2
[ebuild R ] sys-devel/gettext-0.19.8.1
[ebuild R ] dev-libs/libxslt-1.1.32
[ebuild N ] sys-fs/cryptsetup-1.7.5-r1
[ebuild R ] sys-libs/pam-1.2.1-r2
[ebuild R ] net-misc/wget-1.19.5
[ebuild R ] sys-apps/shadow-4.6
[ebuild R ] dev-libs/elfutils-0.170-r1
[ebuild R ] app-arch/tar-1.30
[ebuild R ] sys-devel/gcc-7.3.0-r3
[ebuild R ] dev-libs/glib-2.52.3
[ebuild N ] dev-util/dialog-1.3.20170131
[ebuild N ] sys-libs/binutils-libs-2.30-r2
[ebuild N ] app-arch/dpkg-1.19.0.5
[ebuild R ] net-libs/gnutls-3.5.18
[ebuild N ] sys-fs/xfsprogs-4.14.0
[ebuild N ] sys-devel/binutils-hppa64-2.30-r2
[ebuild N ] dev-util/desktop-file-utils-0.23
[ebuild N ] app-admin/syslog-ng-3.13.2
[ebuild R ] app-crypt/gnupg-2.2.8
[ebuild N ] app-portage/mirrorselect-2.2.3
[ebuild N ] app-text/wgetpaste-2.28
[ebuild N ] dev-util/debootstrap-1.0.89
[ebuild N ] net-irc/irssi-1.0.7
[ebuild N ] app-misc/livecd-tools-2.4
[ebuild N ] sys-devel/kgcc64-7.3.0
[ebuild N ] www-client/links-2.14-r1
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by virtual/libusb-1-r1::gentoo
# required by sys-apps/usbutils-008-r1::gentoo
# required by sys-apps/usbutils (argument)
=dev-libs/libusb-1.0.22 ~hppa
The following USE changes are necessary to proceed:
(see "package.use" in the portage(5) man page for more details)
# required by dev-python/cryptography-2.2.2-r1::gentoo[-libressl]
# required by dev-python/urllib3-1.22::gentoo
# required by dev-python/requests-2.18.4-r1::gentoo
# required by dev-python/ssl-fetch-0.4::gentoo
# required by app-portage/mirrorselect-2.2.3::gentoo
# required by app-portage/mirrorselect (argument)
>=dev-libs/openssl-1.0.2o-r3 -bindist
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180822T131132Z/.catalyst_lock'
Command exited with non-zero status 1
517.46user 219.27system 13:59.37elapsed 87%CPU (0avgtext+0avgdata 66336maxresident)k
0inputs+0outputs (13major+1970857minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180822T131132Z.jJHcTf/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2018-09-14 18:19 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2018-09-14 18:19 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage1.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20180909T071009Z.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20180909T071009Z/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20180909T071009Z/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20180909T071009Z.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/livecd_stage1_target.py", line 18, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
Command exited with non-zero status 1
0.79user 0.33system 0:08.86elapsed 12%CPU (0avgtext+0avgdata 11348maxresident)k
0inputs+0outputs (32major+3116minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180909T071009Z.OOdoDY/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2018-09-25 20:00 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2018-09-25 20:00 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
--- Running action sequence: unpack
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20180917T174441Z/
Emptying directory /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180917T174441Z/
Starting tar extract from /usr/local/catalyst/builds/default/stage3-hppa1.1-20180917T174441Z.tar.bz2
to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180917T174441Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
Warning!!!
The use of -* in livecd/use will cause portage to ignore
package.use in the profile and portage_confdir. You've been warned!
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
Copying livecd-stage1-chroot.sh to /tmp
copying livecd-stage1-chroot.sh to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180917T174441Z//tmp
copying chroot-functions.sh to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180917T174441Z//tmp
Ensure the file has the executable bit set
Running livecd-stage1-chroot.sh in chroot /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180917T174441Z/
>>> Regenerating /etc/ld.so.cache...
Updating portage with USE=""
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.40-r1::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.40-r1::gentoo
emerge --quiet --usepkg --buildpkg --newuse --update --deep --newuse app-accessibility/brltty app-admin/hddtemp app-admin/passook app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-misc/screen app-portage/mirrorselect app-text/wgetpaste dev-util/debootstrap net-analyzer/traceroute net-dialup/mingetty net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-misc/vconfig net-proxy/dante sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/pciutils sys-apps/sdparm sys-apps/usbutils sys-devel/binutils-hppa64 sys-devel/kgcc64 sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/lsscsi sys-fs/cryptsetup sys-fs/lvm2 sys-fs/lsscsi sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links sys-devel/bc app-misc/livecd-tools
[ebuild R ] sys-libs/ncurses-6.1-r2
[ebuild N ] sys-apps/hwdata-gentoo-0.4
[ebuild R ] app-arch/unzip-6.0_p21-r2
[ebuild N ] net-dialup/mingetty-1.08-r1
[ebuild N ] sys-devel/autoconf-archive-2018.03.13
[ebuild N ] app-admin/killproc-2.13-r1
[ebuild N ] net-dialup/ppp-scripts-0
[ebuild N ] net-analyzer/netselect-0.3-r3
[ebuild N ] dev-libs/ivykis-0.42.2
[ebuild N ] sys-apps/miscfiles-1.5-r3
[ebuild N ] app-admin/pwgen-2.07
[ebuild N ] net-analyzer/traceroute-2.0.20
[ebuild N ] net-misc/rdate-1.4-r4
[ebuild N ] net-misc/vconfig-1.9
[ebuild N ] sys-apps/hdparm-9.52
[ebuild N ] sys-fs/lsscsi-0.28
[ebuild N ] sys-fs/reiserfsprogs-3.6.25
[ebuild N ] sys-apps/keyutils-1.5.9-r4
[ebuild R ] app-arch/xz-utils-5.2.3
[ebuild R ] app-shells/bash-4.4_p12
[ebuild R ] sys-apps/file-5.33-r4
[ebuild N ] dev-libs/libusb-1.0.22
[ebuild N ] media-libs/libjpeg-turbo-1.5.0
[ebuild R ] sys-apps/coreutils-8.29-r1
[ebuild R ] dev-libs/gmp-6.1.2
[ebuild N ] media-libs/libpng-1.6.34
[ebuild N ] virtual/libusb-1-r1
[ebuild N ] virtual/jpeg-0-r2
[ebuild N ] sys-apps/ethtool-4.13
[ebuild N ] sys-devel/bc-1.06.95-r2
[ebuild R ] dev-lang/perl-5.24.3-r1
[ebuild R ] dev-libs/openssl-1.0.2p
[ebuild N ] app-admin/passook-20121001
[ebuild R ] net-misc/iputils-20171016_pre
[ebuild N ] dev-libs/libevent-2.1.8
[ebuild N ] net-libs/rpcsvc-proto-1.3.1-r1
[ebuild N ] sys-fs/dosfstools-4.0-r1
[ebuild R ] dev-python/setuptools-36.7.2
[ebuild R ] dev-python/certifi-2018.4.16
[ebuild N ] dev-python/idna-2.5
[ebuild N ] dev-python/PySocks-1.6.7
[ebuild N ] dev-python/six-1.11.0
[ebuild N ] dev-python/pyasn1-0.2.3
[ebuild N ] dev-python/chardet-3.0.4
[ebuild N ] dev-python/asn1crypto-0.24.0
[ebuild N ] dev-python/enum34-1.1.6
[ebuild N ] dev-python/ply-3.9
[ebuild N ] dev-python/ipaddress-1.0.19
[ebuild R ] dev-python/pyblake2-1.1.2
[ebuild N ] virtual/python-ipaddress-1.0-r1
[ebuild N ] dev-python/pycparser-2.14
[ebuild N ] sys-apps/sg3_utils-1.42
[ebuild N ] sys-apps/rescan-scsi-bus-1.57-r1
[ebuild N ] sys-apps/sdparm-1.10
[ebuild N ] net-dialup/ppp-2.4.7-r6
[ebuild N ] app-misc/screen-4.6.1
[ebuild N ] net-fs/cifs-utils-6.8
[ebuild N ] net-dialup/rp-pppoe-3.12-r1
[ebuild R ] sys-auth/pambase-20150213-r1
[ebuild R ] sys-apps/iproute2-4.14.1-r2
[ebuild R ] net-misc/rsync-3.1.3
[ebuild R ] dev-libs/libpcre-8.41-r1
[ebuild R ] sys-apps/hwids-20171003
[ebuild N ] net-proxy/dante-1.4.1-r1
[ebuild R ] sys-apps/openrc-0.34.11
[ebuild N ] net-nds/rpcbind-0.2.4-r3
[ebuild N ] dev-python/cffi-1.11.4
[ebuild N ] app-accessibility/brltty-5.2-r1
[ebuild N ] app-admin/hddtemp-0.3_beta15-r26
[ebuild N ] net-misc/dhcpcd-6.11.3
[ebuild N ] net-misc/ntp-4.2.8_p11
[ebuild N ] sys-apps/pciutils-3.5.6
[ebuild N ] dev-python/cryptography-2.2.2-r1
[ebuild N ] net-fs/nfs-utils-2.3.1-r3
[ebuild N ] dev-python/pyopenssl-17.5.0
[ebuild N ] sys-libs/libkudzu-1.2.57.1
[ebuild N ] dev-python/ndg-httpsclient-0.4.0
[ebuild N ] dev-python/urllib3-1.22
[ebuild N ] sys-apps/hwsetup-1.2-r3
[ebuild N ] dev-python/requests-2.18.4-r1
[ebuild N ] dev-python/ssl-fetch-0.4
[ebuild N ] virtual/libudev-232
[ebuild N ] sys-apps/usbutils-008-r1
[ebuild R ] sys-apps/util-linux-2.32-r4
[ebuild R ] sys-fs/eudev-3.2.5
[ebuild N ] sys-fs/mdadm-3.4
[ebuild R ] sys-apps/sed-4.5
[ebuild R ] sys-devel/binutils-2.30-r2
[ebuild R ] dev-libs/libxml2-2.9.8
[ebuild N ] sys-fs/lvm2-2.02.145-r2
[ebuild R ] sys-devel/gettext-0.19.8.1
[ebuild R ] dev-libs/libxslt-1.1.32
[ebuild N ] sys-fs/cryptsetup-1.7.5-r1
[ebuild R ] sys-libs/pam-1.2.1-r2
[ebuild R ] net-misc/wget-1.19.5
[ebuild R ] sys-apps/shadow-4.6
[ebuild R ] dev-libs/elfutils-0.170-r1
[ebuild R ] app-arch/tar-1.30
[ebuild R ] dev-libs/glib-2.52.3
[ebuild N ] dev-util/dialog-1.3.20170131
[ebuild N ] sys-libs/binutils-libs-2.30-r2
[ebuild N ] app-arch/dpkg-1.19.0.5
[ebuild R ] net-libs/gnutls-3.5.19
[ebuild N ] sys-fs/xfsprogs-4.17.0-r1
[ebuild N ] sys-devel/binutils-hppa64-2.30-r2
[ebuild N ] dev-util/desktop-file-utils-0.23
[ebuild N ] app-admin/syslog-ng-3.13.2
[ebuild R ] app-crypt/gnupg-2.2.8
[ebuild N ] app-portage/mirrorselect-2.2.3
[ebuild N ] app-text/wgetpaste-2.28
[ebuild N ] dev-util/debootstrap-1.0.89
[ebuild N ] net-irc/irssi-1.0.7
[ebuild N ] app-misc/livecd-tools-2.4
[ebuild N ] sys-devel/kgcc64-7.3.0
[ebuild N ] www-client/links-2.14-r1
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by net-fs/cifs-utils (argument)
=net-fs/cifs-utils-6.8 ~hppa
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180917T174441Z/.catalyst_lock'
Command exited with non-zero status 1
511.37user 211.19system 13:33.96elapsed 88%CPU (0avgtext+0avgdata 65152maxresident)k
0inputs+0outputs (24major+2012330minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180917T174441Z.Jda3OE/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2018-09-28 8:49 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2018-09-28 8:49 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
make[2]: Entering directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Braille/TSI'
make[2]: Nothing to be done for 'install'.
make[2]: Leaving directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Braille/TSI'
make[2]: Entering directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Braille/TTY'
make[2]: Nothing to be done for 'install'.
make[2]: Leaving directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Braille/TTY'
make[2]: Entering directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Braille/VideoBraille'
make[2]: Nothing to be done for 'install'.
make[2]: Leaving directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Braille/VideoBraille'
make[2]: Entering directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Braille/Voyager'
make[2]: Nothing to be done for 'install'.
make[2]: Leaving directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Braille/Voyager'
make[2]: Entering directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Braille/Virtual'
make[2]: Nothing to be done for 'install'.
make[2]: Leaving directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Braille/Virtual'
make[2]: Entering directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Braille/VisioBraille'
make[2]: Nothing to be done for 'install'.
make[2]: Leaving directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Braille/VisioBraille'
set -- ; \
for driver do (cd ./../Drivers/Speech/$driver && make install); done
set -- Linux Screen; \
for driver do (cd ./../Drivers/Screen/$driver && make install); done
make[2]: Entering directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Screen/Linux'
make[2]: Nothing to be done for 'install'.
make[2]: Leaving directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Screen/Linux'
make[2]: Entering directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Screen/Screen'
make[2]: Nothing to be done for 'install'.
make[2]: Leaving directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Drivers/Screen/Screen'
make[1]: Leaving directory '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2/Programs'
mv: cannot stat '/var/tmp/portage/app-accessibility/brltty-5.2-r1/image//lib/*.a': No such file or directory
* ERROR: app-accessibility/brltty-5.2-r1::gentoo failed (install phase):
* (no error message)
*
* Call stack:
* ebuild.sh, line 124: Called src_install
* environment, line 5733: Called die
* The specific snippet of code:
* mv "${D}"/${libdir}/*.a "${D}"/usr/${libdir}/ || die;
*
* If you need support, post the output of `emerge --info '=app-accessibility/brltty-5.2-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=app-accessibility/brltty-5.2-r1::gentoo'`.
!!! When you file a bug report, please include the following information:
GENTOO_VM= CLASSPATH="" JAVA_HOME=""
JAVACFLAGS="" COMPILER=""
and of course, the output of emerge --info =brltty-5.2
* The complete build log is located at '/var/tmp/portage/app-accessibility/brltty-5.2-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-accessibility/brltty-5.2-r1/temp/environment'.
* Working directory: '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2'
* S: '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2'
* Messages for package sys-fs/eudev-3.2.5:
*
* As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package net-misc/vconfig-1.9:
* MTU problems exist for many ethernet drivers.
* Reduce the MTU on the interface to 1496 to work around them.
* Messages for package sys-apps/keyutils-1.5.9-r4:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - KEYS - You must have CONFIG_KEYS to use this package!
* You're on your own to make sure they are set if needed.
* Messages for package net-dialup/ppp-2.4.7-r6:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Pon, poff and plog scripts have been supplied for experienced users.
* Users needing particular scripts (ssh,rsh,etc.) should check out the
* /usr/share/doc/ppp-2.4.7-r6/scripts directory.
* Messages for package net-misc/dhcpcd-6.11.3:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package sys-libs/libkudzu-1.2.57.1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package dev-python/ndg-httpsclient-0.4.0:
* The following *-nspkg.pth files were found installed:
*
* /usr/lib/python2.7/site-packages/ndg_httpsclient-0.4.0-py2.7-nspkg.pth
*
* The presence of those files may break namespaces in Python 3.5+. Please
* read our documentation on reliable handling of namespaces and update
* the ebuild accordingly:
*
* https://wiki.gentoo.org/wiki/Project:Python/Namespace_packages
* Messages for package sys-apps/hwsetup-1.2-r3:
* This package is designed for use on the LiveCD only and will do
* unspeakably horrible and unexpected things on a normal system.
* YOU HAVE BEEN WARNED!!!
* This package is intended for use on the Gentoo release media. If
* you are not building a CD, remove this package. It will not work
* properly on a running system, as Gentoo does not use any of the
* Knoppix-style detection except for CD builds.
* Messages for package dev-python/ssl-fetch-0.4:
* This is beta software.
* The APIs it installs should be considered unstable
* and are subject to change in these early versions.
*
* Please file any enhancement requests, or bugs
* at https://github.com/dol-sen/ssl-fetch/issues
* I am also on IRC @ #gentoo-portage, #gentoo-keys,... of the Freenode network
* Messages for package sys-apps/openrc-0.38.2:
* Setting the console font does not work on all HPPA consoles.
* You can still enable it by running:
* # rc-update add consolefont boot
* You have emerged OpenRc without network support. This
* means you need to SET UP a network manager such as
* net-misc/netifrc, net-misc/dhcpcd, net-misc/wicd,
* net-misc/NetworkManager, or net-vpn/badvpn.
* Or, you have the option of emerging openrc with the newnet
* use flag and configuring /etc/conf.d/network and
* /etc/conf.d/staticroute if you only use static interfaces.
*
* Messages for package app-accessibility/brltty-5.2-r1:
* ERROR: app-accessibility/brltty-5.2-r1::gentoo failed (install phase):
* (no error message)
*
* Call stack:
* ebuild.sh, line 124: Called src_install
* environment, line 5733: Called die
* The specific snippet of code:
* mv "${D}"/${libdir}/*.a "${D}"/usr/${libdir}/ || die;
*
* If you need support, post the output of `emerge --info '=app-accessibility/brltty-5.2-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=app-accessibility/brltty-5.2-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/app-accessibility/brltty-5.2-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-accessibility/brltty-5.2-r1/temp/environment'.
* Working directory: '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2'
* S: '/var/tmp/portage/app-accessibility/brltty-5.2-r1/work/brltty-5.2'
!!! catalyst: Error in attempt to build packages
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1403, in build_packages
"Error in attempt to build packages",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: livecdbuild aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
"build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20180927T071022Z/.catalyst_lock'
Command exited with non-zero status 1
15819.77user 20547.07system 10:49:53elapsed 93%CPU (0avgtext+0avgdata 299584maxresident)k
0inputs+0outputs (67major+137271913minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180927T071022Z.dSszAT/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2018-12-05 17:12 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2018-12-05 17:12 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage1.spec
05 Dec 2018 12:12:43 EST: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
05 Dec 2018 12:12:43 EST: NOTICE : conf_values[options] = {'clear-autoresume', 'snapcache', 'pkgcache', 'seedcache', 'bindist', 'autoresume'}
05 Dec 2018 12:12:43 EST: NOTICE : Processing spec file: installcd-stage1.spec
05 Dec 2018 12:12:43 EST: NOTICE : Using target: livecd-stage1
05 Dec 2018 12:12:44 EST: NOTICE : Source file specification matching setting is: strict
05 Dec 2018 12:12:44 EST: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
05 Dec 2018 12:12:44 EST: NOTICE : Source path set to /usr/local/catalyst/tmp/default/stage3-hppa1.1-20181201T103010Z/
05 Dec 2018 12:12:45 EST: NOTICE : Removing AutoResume Points ...
05 Dec 2018 12:12:45 EST: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20181201T103010Z
05 Dec 2018 12:12:45 EST: NOTICE : --- Running action sequence: unpack
05 Dec 2018 12:12:45 EST: NOTICE : Resume: "seed source" unpack resume point is disabled
05 Dec 2018 12:12:45 EST: NOTICE : Resume: Target chroot is invalid, cleaning up...
05 Dec 2018 12:12:45 EST: NOTICE : Removing AutoResume Points ...
05 Dec 2018 12:12:45 EST: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20181201T103010Z
05 Dec 2018 12:12:45 EST: NOTICE : Clearing the chroot path ...
05 Dec 2018 12:12:45 EST: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20181201T103010Z
05 Dec 2018 12:12:45 EST: NOTICE : Starting rsync from /usr/local/catalyst/tmp/default/stage3-hppa1.1-20181201T103010Z/
05 Dec 2018 12:12:45 EST: NOTICE : to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20181201T103010Z (this may take some time) ..
05 Dec 2018 12:12:45 EST: NOTICE : --- Running action sequence: unpack_snapshot
05 Dec 2018 12:12:45 EST: NOTICE : --- Running action sequence: config_profile_link
05 Dec 2018 12:12:45 EST: NOTICE : --- Running action sequence: setup_confdir
05 Dec 2018 12:12:45 EST: NOTICE : --- Running action sequence: portage_overlay
05 Dec 2018 12:12:45 EST: NOTICE : --- Running action sequence: bind
05 Dec 2018 12:12:45 EST: NOTICE : --- Running action sequence: chroot_setup
05 Dec 2018 12:12:45 EST: NOTICE : Setting up chroot...
05 Dec 2018 12:12:45 EST: WARNING : Overriding certain env variables may cause catastrophic failure.
05 Dec 2018 12:12:45 EST: WARNING : If your build fails look here first as the possible problem.
05 Dec 2018 12:12:45 EST: WARNING : Catalyst assumes you know what you are doing when setting these variables.
05 Dec 2018 12:12:45 EST: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
05 Dec 2018 12:12:45 EST: WARNING : You have been warned.
05 Dec 2018 12:12:45 EST: ERROR : Exception running action sequence chroot_setup
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1460, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1068, in chroot_setup
self.settings['chroot_path'] + '/tmp/envscript')
File "/usr/lib/python3.6/shutil.py", line 241, in copy
copyfile(src, dst, follow_symlinks=follow_symlinks)
File "/usr/lib/python3.6/shutil.py", line 121, in copyfile
with open(dst, 'wb') as fdst:
FileNotFoundError: [Errno 2] No such file or directory: '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20181201T103010Z/tmp/envscript'
05 Dec 2018 12:12:45 EST: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
2.79user 1.14system 0:04.33elapsed 90%CPU (0avgtext+0avgdata 14404maxresident)k
0inputs+0outputs (2major+17009minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20181201T103010Z.yMly6a/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2019-01-03 17:52 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2019-01-03 17:52 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage1.spec
03 Jan 2019 12:52:18 EST: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
03 Jan 2019 12:52:18 EST: NOTICE : conf_values[options] = {'autoresume', 'seedcache', 'clear-autoresume', 'bindist', 'snapcache', 'pkgcache'}
03 Jan 2019 12:52:19 EST: NOTICE : Processing spec file: installcd-stage1.spec
03 Jan 2019 12:52:19 EST: NOTICE : Using target: livecd-stage1
03 Jan 2019 12:52:19 EST: NOTICE : Source file specification matching setting is: strict
03 Jan 2019 12:52:19 EST: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
03 Jan 2019 12:52:20 EST: NOTICE : Source path set to /usr/local/catalyst/tmp/default/stage3-hppa1.1-20190101T103011Z/
03 Jan 2019 12:52:20 EST: NOTICE : Removing AutoResume Points ...
03 Jan 2019 12:52:20 EST: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20190101T103011Z
03 Jan 2019 12:52:20 EST: NOTICE : --- Running action sequence: unpack
03 Jan 2019 12:52:20 EST: NOTICE : Resume: "seed source" unpack resume point is disabled
03 Jan 2019 12:52:20 EST: NOTICE : Resume: Target chroot is invalid, cleaning up...
03 Jan 2019 12:52:20 EST: NOTICE : Removing AutoResume Points ...
03 Jan 2019 12:52:20 EST: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20190101T103011Z
03 Jan 2019 12:52:20 EST: NOTICE : Clearing the chroot path ...
03 Jan 2019 12:52:20 EST: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20190101T103011Z
03 Jan 2019 12:52:20 EST: NOTICE : Starting rsync from /usr/local/catalyst/tmp/default/stage3-hppa1.1-20190101T103011Z/
03 Jan 2019 12:52:20 EST: NOTICE : to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20190101T103011Z (this may take some time) ..
03 Jan 2019 12:52:20 EST: NOTICE : --- Running action sequence: unpack_snapshot
03 Jan 2019 12:52:20 EST: NOTICE : --- Running action sequence: config_profile_link
03 Jan 2019 12:52:20 EST: NOTICE : --- Running action sequence: setup_confdir
03 Jan 2019 12:52:20 EST: NOTICE : --- Running action sequence: portage_overlay
03 Jan 2019 12:52:20 EST: NOTICE : --- Running action sequence: bind
03 Jan 2019 12:52:21 EST: NOTICE : --- Running action sequence: chroot_setup
03 Jan 2019 12:52:21 EST: NOTICE : Setting up chroot...
03 Jan 2019 12:52:21 EST: WARNING : Overriding certain env variables may cause catastrophic failure.
03 Jan 2019 12:52:21 EST: WARNING : If your build fails look here first as the possible problem.
03 Jan 2019 12:52:21 EST: WARNING : Catalyst assumes you know what you are doing when setting these variables.
03 Jan 2019 12:52:21 EST: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
03 Jan 2019 12:52:21 EST: WARNING : You have been warned.
03 Jan 2019 12:52:21 EST: ERROR : Exception running action sequence chroot_setup
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1460, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1068, in chroot_setup
self.settings['chroot_path'] + '/tmp/envscript')
File "/usr/lib/python3.6/shutil.py", line 241, in copy
copyfile(src, dst, follow_symlinks=follow_symlinks)
File "/usr/lib/python3.6/shutil.py", line 121, in copyfile
with open(dst, 'wb') as fdst:
FileNotFoundError: [Errno 2] No such file or directory: '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20190101T103011Z/tmp/envscript'
03 Jan 2019 12:52:21 EST: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
2.72user 1.16system 0:04.27elapsed 91%CPU (0avgtext+0avgdata 14396maxresident)k
0inputs+0outputs (0major+16933minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190101T103011Z.pyrpA1/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2019-02-02 12:11 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2019-02-02 12:11 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage1.spec
02 Feb 2019 07:11:38 EST: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
02 Feb 2019 07:11:38 EST: NOTICE : conf_values[options] = {'seedcache', 'snapcache', 'autoresume', 'pkgcache', 'clear-autoresume', 'bindist'}
02 Feb 2019 07:11:38 EST: NOTICE : Processing spec file: installcd-stage1.spec
02 Feb 2019 07:11:39 EST: NOTICE : Using target: livecd-stage1
02 Feb 2019 07:11:39 EST: NOTICE : Source file specification matching setting is: strict
02 Feb 2019 07:11:39 EST: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
02 Feb 2019 07:11:40 EST: NOTICE : Source path set to /usr/local/catalyst/tmp/default/stage3-hppa1.1-20190201T103010Z/
02 Feb 2019 07:11:40 EST: NOTICE : Removing AutoResume Points ...
02 Feb 2019 07:11:40 EST: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20190201T103010Z
02 Feb 2019 07:11:40 EST: NOTICE : --- Running action sequence: unpack
02 Feb 2019 07:11:40 EST: NOTICE : Resume: "seed source" unpack resume point is disabled
02 Feb 2019 07:11:40 EST: NOTICE : Resume: Target chroot is invalid, cleaning up...
02 Feb 2019 07:11:40 EST: NOTICE : Removing AutoResume Points ...
02 Feb 2019 07:11:40 EST: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20190201T103010Z
02 Feb 2019 07:11:40 EST: NOTICE : Clearing the chroot path ...
02 Feb 2019 07:11:40 EST: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20190201T103010Z
02 Feb 2019 07:11:40 EST: NOTICE : Starting rsync from /usr/local/catalyst/tmp/default/stage3-hppa1.1-20190201T103010Z/
02 Feb 2019 07:11:40 EST: NOTICE : to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20190201T103010Z (this may take some time) ..
02 Feb 2019 07:11:40 EST: NOTICE : --- Running action sequence: unpack_snapshot
02 Feb 2019 07:11:40 EST: NOTICE : --- Running action sequence: config_profile_link
02 Feb 2019 07:11:40 EST: NOTICE : --- Running action sequence: setup_confdir
02 Feb 2019 07:11:40 EST: NOTICE : --- Running action sequence: portage_overlay
02 Feb 2019 07:11:40 EST: NOTICE : --- Running action sequence: bind
02 Feb 2019 07:11:40 EST: NOTICE : --- Running action sequence: chroot_setup
02 Feb 2019 07:11:40 EST: NOTICE : Setting up chroot...
02 Feb 2019 07:11:40 EST: WARNING : Overriding certain env variables may cause catastrophic failure.
02 Feb 2019 07:11:40 EST: WARNING : If your build fails look here first as the possible problem.
02 Feb 2019 07:11:40 EST: WARNING : Catalyst assumes you know what you are doing when setting these variables.
02 Feb 2019 07:11:40 EST: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
02 Feb 2019 07:11:40 EST: WARNING : You have been warned.
02 Feb 2019 07:11:40 EST: ERROR : Exception running action sequence chroot_setup
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1460, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1068, in chroot_setup
self.settings['chroot_path'] + '/tmp/envscript')
File "/usr/lib/python3.6/shutil.py", line 241, in copy
copyfile(src, dst, follow_symlinks=follow_symlinks)
File "/usr/lib/python3.6/shutil.py", line 121, in copyfile
with open(dst, 'wb') as fdst:
FileNotFoundError: [Errno 2] No such file or directory: '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20190201T103010Z/tmp/envscript'
02 Feb 2019 07:11:40 EST: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
2.67user 1.21system 0:04.44elapsed 87%CPU (0avgtext+0avgdata 14404maxresident)k
0inputs+0outputs (4major+17009minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190201T103010Z.xiYfei/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2019-03-03 3:16 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2019-03-03 3:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage1.spec
02 Mar 2019 22:16:03 EST: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
02 Mar 2019 22:16:03 EST: NOTICE : conf_values[options] = {'bindist', 'seedcache', 'autoresume', 'pkgcache', 'clear-autoresume', 'snapcache'}
02 Mar 2019 22:16:03 EST: NOTICE : Processing spec file: installcd-stage1.spec
02 Mar 2019 22:16:04 EST: NOTICE : Using target: livecd-stage1
02 Mar 2019 22:16:04 EST: NOTICE : Source file specification matching setting is: strict
02 Mar 2019 22:16:04 EST: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
02 Mar 2019 22:16:07 EST: NOTICE : Source path set to /usr/local/catalyst/tmp/default/stage3-hppa1.1-20190301T103008Z/
Traceback (most recent call last):
File "/usr/lib/python-exec/python3.6/catalyst", line 37, in <module>
main(sys.argv[1:])
File "/usr/lib/python3.6/site-packages/catalyst/main.py", line 285, in main
return _main(parser, opts)
File "/usr/lib/python3.6/site-packages/catalyst/main.py", line 452, in _main
success = build_target(addlargs)
File "/usr/lib/python3.6/site-packages/catalyst/main.py", line 107, in build_target
target = getattr(module, target)(conf_values, addlargs)
File "/usr/lib/python3.6/site-packages/catalyst/targets/livecd_stage1.py", line 20, in __init__
StageBase.__init__(self,spec,addlargs)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 173, in __init__
self.set_chroot_path()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 504, in set_chroot_path
self.chroot_lock = LockDir(self.settings["chroot_path"])
File "/usr/lib/python3.6/site-packages/catalyst/lock.py", line 19, in __init__
fileutils.touch(self.lockfile, mode=0o664)
File "/usr/lib/python3.6/site-packages/snakeoil/fileutils.py", line 46, in touch
with os.fdopen(os_open(fname, flags, mode)) as f:
FileNotFoundError: [Errno 2] No such file or directory: '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20190301T103008Z/.catalyst_lock'
Command exited with non-zero status 1
2.48user 0.51system 0:07.13elapsed 42%CPU (0avgtext+0avgdata 12676maxresident)k
0inputs+0outputs (0major+6876minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190301T103008Z.JgkwTH/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2019-03-05 4:51 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2019-03-05 4:51 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage1.spec
04 Mar 2019 23:51:18 EST: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
04 Mar 2019 23:51:18 EST: NOTICE : conf_values[options] = {'seedcache', 'bindist', 'pkgcache', 'clear-autoresume', 'autoresume', 'snapcache'}
04 Mar 2019 23:51:19 EST: NOTICE : Processing spec file: installcd-stage1.spec
04 Mar 2019 23:51:21 EST: NOTICE : Using target: livecd-stage1
04 Mar 2019 23:51:21 EST: NOTICE : Source file specification matching setting is: strict
04 Mar 2019 23:51:21 EST: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
04 Mar 2019 23:51:22 EST: NOTICE : Source path set to /usr/local/catalyst/tmp/default/stage3-hppa1.1-20190303T055259Z/
04 Mar 2019 23:51:22 EST: NOTICE : Removing AutoResume Points ...
04 Mar 2019 23:51:22 EST: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20190303T055259Z
04 Mar 2019 23:51:22 EST: NOTICE : --- Running action sequence: unpack
04 Mar 2019 23:51:22 EST: NOTICE : Resume: "seed source" unpack resume point is disabled
04 Mar 2019 23:51:22 EST: NOTICE : Resume: Target chroot is invalid, cleaning up...
04 Mar 2019 23:51:22 EST: NOTICE : Removing AutoResume Points ...
04 Mar 2019 23:51:22 EST: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20190303T055259Z
04 Mar 2019 23:51:22 EST: NOTICE : Clearing the chroot path ...
04 Mar 2019 23:51:22 EST: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20190303T055259Z
04 Mar 2019 23:51:22 EST: NOTICE : Starting rsync from /usr/local/catalyst/tmp/default/stage3-hppa1.1-20190303T055259Z/
04 Mar 2019 23:51:22 EST: NOTICE : to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20190303T055259Z (this may take some time) ..
04 Mar 2019 23:51:22 EST: NOTICE : --- Running action sequence: unpack_snapshot
04 Mar 2019 23:51:22 EST: NOTICE : --- Running action sequence: config_profile_link
04 Mar 2019 23:51:22 EST: NOTICE : --- Running action sequence: setup_confdir
04 Mar 2019 23:51:22 EST: NOTICE : --- Running action sequence: portage_overlay
04 Mar 2019 23:51:22 EST: NOTICE : --- Running action sequence: bind
04 Mar 2019 23:51:23 EST: NOTICE : --- Running action sequence: chroot_setup
04 Mar 2019 23:51:23 EST: NOTICE : Setting up chroot...
04 Mar 2019 23:51:23 EST: WARNING : Overriding certain env variables may cause catastrophic failure.
04 Mar 2019 23:51:23 EST: WARNING : If your build fails look here first as the possible problem.
04 Mar 2019 23:51:23 EST: WARNING : Catalyst assumes you know what you are doing when setting these variables.
04 Mar 2019 23:51:23 EST: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
04 Mar 2019 23:51:23 EST: WARNING : You have been warned.
04 Mar 2019 23:51:23 EST: ERROR : Exception running action sequence chroot_setup
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1460, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1068, in chroot_setup
self.settings['chroot_path'] + '/tmp/envscript')
File "/usr/lib/python3.6/shutil.py", line 241, in copy
copyfile(src, dst, follow_symlinks=follow_symlinks)
File "/usr/lib/python3.6/shutil.py", line 121, in copyfile
with open(dst, 'wb') as fdst:
FileNotFoundError: [Errno 2] No such file or directory: '/usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20190303T055259Z/tmp/envscript'
04 Mar 2019 23:51:23 EST: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
2.73user 1.14system 0:06.31elapsed 61%CPU (0avgtext+0avgdata 13108maxresident)k
0inputs+0outputs (1major+17133minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190303T055259Z.KJy1Zq/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2019-03-07 5:55 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2019-03-07 5:55 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage1.spec
07 Mar 2019 00:44:03 EST: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
07 Mar 2019 00:44:03 EST: NOTICE : conf_values[options] = {'clear-autoresume', 'pkgcache', 'bindist', 'autoresume', 'snapcache'}
07 Mar 2019 00:44:04 EST: NOTICE : Processing spec file: installcd-stage1.spec
07 Mar 2019 00:44:04 EST: NOTICE : Using target: livecd-stage1
07 Mar 2019 00:44:04 EST: NOTICE : Source file specification matching setting is: strict
07 Mar 2019 00:44:04 EST: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
07 Mar 2019 00:44:09 EST: NOTICE : Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20190306T061647Z.tar.bz2
07 Mar 2019 00:44:09 EST: NOTICE : Removing AutoResume Points ...
07 Mar 2019 00:44:09 EST: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20190306T061647Z
07 Mar 2019 00:44:09 EST: NOTICE : --- Running action sequence: unpack
07 Mar 2019 00:44:09 EST: NOTICE : Resume: "seed source" unpack resume point is disabled
07 Mar 2019 00:44:09 EST: NOTICE : Resume: Target chroot is invalid, cleaning up...
07 Mar 2019 00:44:09 EST: NOTICE : Removing AutoResume Points ...
07 Mar 2019 00:44:09 EST: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20190306T061647Z
07 Mar 2019 00:44:09 EST: NOTICE : Clearing the chroot path ...
07 Mar 2019 00:44:09 EST: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20190306T061647Z
07 Mar 2019 00:44:09 EST: NOTICE : Starting auto from /usr/local/catalyst/builds/default/stage3-hppa1.1-20190306T061647Z.tar.bz2
07 Mar 2019 00:44:09 EST: NOTICE : to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20190306T061647Z (this may take some time) ..
07 Mar 2019 00:49:01 EST: NOTICE : --- Running action sequence: unpack_snapshot
07 Mar 2019 00:49:01 EST: NOTICE : --- Running action sequence: config_profile_link
07 Mar 2019 00:49:01 EST: NOTICE : --- Running action sequence: setup_confdir
07 Mar 2019 00:49:01 EST: NOTICE : --- Running action sequence: portage_overlay
07 Mar 2019 00:49:01 EST: NOTICE : --- Running action sequence: bind
07 Mar 2019 00:49:01 EST: NOTICE : --- Running action sequence: chroot_setup
07 Mar 2019 00:49:01 EST: NOTICE : Setting up chroot...
07 Mar 2019 00:49:01 EST: WARNING : Overriding certain env variables may cause catastrophic failure.
07 Mar 2019 00:49:01 EST: WARNING : If your build fails look here first as the possible problem.
07 Mar 2019 00:49:01 EST: WARNING : Catalyst assumes you know what you are doing when setting these variables.
07 Mar 2019 00:49:01 EST: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
07 Mar 2019 00:49:01 EST: WARNING : You have been warned.
07 Mar 2019 00:49:01 EST: NOTICE : Writing the stage make.conf to: /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20190306T061647Z/etc/portage/make.conf
07 Mar 2019 00:49:01 EST: NOTICE : STICKY-CONFIG is enabled
07 Mar 2019 00:49:01 EST: WARNING : The use of -* in livecd/use will cause portage to ignore
07 Mar 2019 00:49:01 EST: WARNING : package.use in the profile and portage_confdir.
07 Mar 2019 00:49:01 EST: WARNING : You've been warned!
07 Mar 2019 00:49:01 EST: NOTICE : --- Running action sequence: setup_environment
07 Mar 2019 00:49:01 EST: NOTICE : --- Running action sequence: build_packages
Copying livecd-stage1-chroot.sh to /tmp
copying livecd-stage1-chroot.sh to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20190306T061647Z/tmp
copying chroot-functions.sh to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20190306T061647Z/tmp
Ensure the file has the executable bit set
Running livecd-stage1-chroot.sh in chroot:
chroot /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20190306T061647Z /tmp/livecd-stage1-chroot.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.51-r1::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.51-r1::gentoo
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --update --deep --newuse app-accessibility/brltty app-admin/hddtemp app-admin/passook app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-editors/emacs app-editors/vim app-misc/screen app-portage/mirrorselect app-text/wgetpaste dev-util/debootstrap net-analyzer/traceroute net-dialup/mingetty net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-misc/vconfig net-proxy/dante sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/pciutils sys-apps/sdparm sys-apps/usbutils sys-devel/bc sys-devel/binutils-hppa64 sys-devel/kgcc64 sys-fs/cryptsetup sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/lsscsi sys-fs/lsscsi sys-fs/lvm2 sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links app-misc/livecd-tools
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-fs/lsscsi (argument)
=sys-fs/lsscsi-0.30 ~hppa
# required by sys-fs/dosfstools (argument)
=sys-fs/dosfstools-4.1 ~hppa
# required by sys-apps/usbutils (argument)
=sys-apps/usbutils-010-r1 ~hppa
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! The ebuild selected to satisfy ">=dev-util/glib-utils-2.56.4" has unmet requirements.
- dev-util/glib-utils-2.56.4::gentoo USE="" PYTHON_SINGLE_TARGET="-python3_5 -python3_6 (-python3_7)" PYTHON_TARGETS="-python3_5 -python3_6 (-python3_7)"
The following REQUIRED_USE flag constraints are unsatisfied:
exactly-one-of ( python_single_target_python3_5 python_single_target_python3_6 python_single_target_python3_7 )
The above constraints are a subset of the following complete expression:
exactly-one-of ( python_single_target_python3_5 python_single_target_python3_6 python_single_target_python3_7 ) python_single_target_python3_5? ( python_targets_python3_5 ) python_single_target_python3_6? ( python_targets_python3_6 ) python_single_target_python3_7? ( python_targets_python3_7 )
(dependency required by "dev-libs/glib-2.56.4::gentoo" [ebuild])
(dependency required by "net-irc/irssi-1.1.2::gentoo" [ebuild])
(dependency required by "net-irc/irssi" [argument])
07 Mar 2019 00:55:54 EST: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/livecd-stage1-controller.sh', 'build_packages', 'app-accessibility/brltty', 'app-admin/hddtemp', 'app-admin/passook', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-arch/unzip', 'app-crypt/gnupg', 'app-editors/emacs', 'app-editors/vim', 'app-misc/screen', 'app-portage/mirrorselect', 'app-text/wgetpaste', 'dev-util/debootstrap', 'net-analyzer/traceroute', 'net-dialup/mingetty', 'net-dialup/rp-pppoe', 'net-fs/cifs-utils', 'net-fs/nfs-utils', 'net-irc/irssi', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ntp', 'net-misc/rdate', 'net-misc/vconfig', 'net-proxy/dante', 'sys-apps/ethtool', 'sys-apps/hdparm', 'sys-apps/hwsetup', 'sys-apps/iproute2', 'sys-apps/pciutils', 'sys-apps/sdparm', 'sys-apps/usbutils', 'sys-devel/bc', 'sys-devel/binutils-hppa64', 'sys-devel/kgcc64', 'sys-fs/cryptsetup', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/lsscsi', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/m
dadm', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-libs/gpm', 'www-client/links', 'app-misc/livecd-tools']) exited 1
07 Mar 2019 00:55:54 EST: ERROR : CatalystError: livecdbuild aborting due to error.
07 Mar 2019 00:55:54 EST: ERROR : Exception running action sequence build_packages
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1561, in build_packages
cmd(command, env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/livecd-stage1-controller.sh', 'build_packages', 'app-accessibility/brltty', 'app-admin/hddtemp', 'app-admin/passook', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-arch/unzip', 'app-crypt/gnupg', 'app-editors/emacs', 'app-editors/vim', 'app-misc/screen', 'app-portage/mirrorselect', 'app-text/wgetpaste', 'dev-util/debootstrap', 'net-analyzer/traceroute', 'net-dialup/mingetty', 'net-dialup/rp-pppoe', 'net-fs/cifs-utils', 'net-fs/nfs-utils', 'net-irc/irssi', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ntp', 'net-misc/rdate', 'net-misc/vconfig', 'net-proxy/dante', 'sys-apps/ethtool', 'sys-apps/hdparm', 'sys-apps/hwsetup', 'sys-apps/iproute2', 'sys-apps/pciutils', 'sys-apps/sdparm', 'sys-apps/usbutils', 'sys-devel/bc', 'sys-devel/binutils-hppa64', 'sys-devel/kgcc64', 'sys-fs/cryptsetup', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/lsscsi', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mdadm', 'sys-fs/reis
erfsprogs', 'sys-fs/xfsprogs', 'sys-libs/gpm', 'www-client/links', 'app-misc/livecd-tools']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1568, in build_packages
"build aborting due to error.")
catalyst.support.CatalystError: livecdbuild aborting due to error.
07 Mar 2019 00:55:54 EST: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
461.73user 205.11system 11:52.35elapsed 93%CPU (0avgtext+0avgdata 42588maxresident)k
0inputs+0outputs (0major+1955803minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190306T061647Z.aCWzVR/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2019-03-23 18:49 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2019-03-23 18:49 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage1.spec
23 Mar 2019 14:40:23 EDT: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
23 Mar 2019 14:40:24 EDT: NOTICE : conf_values[options] = {'snapcache', 'bindist', 'clear-autoresume', 'pkgcache', 'autoresume'}
23 Mar 2019 14:40:24 EDT: NOTICE : Processing spec file: installcd-stage1.spec
23 Mar 2019 14:40:24 EDT: NOTICE : Using target: livecd-stage1
23 Mar 2019 14:40:24 EDT: NOTICE : Source file specification matching setting is: strict
23 Mar 2019 14:40:24 EDT: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
23 Mar 2019 14:40:56 EDT: NOTICE : Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20190314T090106Z.tar.bz2
23 Mar 2019 14:40:56 EDT: NOTICE : Removing AutoResume Points ...
23 Mar 2019 14:40:56 EDT: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20190314T090106Z
23 Mar 2019 14:40:56 EDT: NOTICE : --- Running action sequence: unpack
23 Mar 2019 14:40:56 EDT: NOTICE : Resume: "seed source" unpack resume point is disabled
23 Mar 2019 14:40:56 EDT: NOTICE : Resume: Target chroot is invalid, cleaning up...
23 Mar 2019 14:40:56 EDT: NOTICE : Removing AutoResume Points ...
23 Mar 2019 14:40:56 EDT: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20190314T090106Z
23 Mar 2019 14:40:56 EDT: NOTICE : Clearing the chroot path ...
23 Mar 2019 14:40:56 EDT: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20190314T090106Z
23 Mar 2019 14:40:56 EDT: NOTICE : Starting auto from /usr/local/catalyst/builds/default/stage3-hppa1.1-20190314T090106Z.tar.bz2
23 Mar 2019 14:40:56 EDT: NOTICE : to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20190314T090106Z (this may take some time) ..
23 Mar 2019 14:46:22 EDT: NOTICE : --- Running action sequence: unpack_snapshot
23 Mar 2019 14:46:23 EDT: NOTICE : --- Running action sequence: config_profile_link
23 Mar 2019 14:46:23 EDT: NOTICE : --- Running action sequence: setup_confdir
23 Mar 2019 14:46:23 EDT: NOTICE : --- Running action sequence: portage_overlay
23 Mar 2019 14:46:23 EDT: NOTICE : --- Running action sequence: bind
23 Mar 2019 14:46:24 EDT: NOTICE : --- Running action sequence: chroot_setup
23 Mar 2019 14:46:24 EDT: NOTICE : Setting up chroot...
23 Mar 2019 14:46:24 EDT: WARNING : Overriding certain env variables may cause catastrophic failure.
23 Mar 2019 14:46:24 EDT: WARNING : If your build fails look here first as the possible problem.
23 Mar 2019 14:46:24 EDT: WARNING : Catalyst assumes you know what you are doing when setting these variables.
23 Mar 2019 14:46:24 EDT: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
23 Mar 2019 14:46:24 EDT: WARNING : You have been warned.
23 Mar 2019 14:46:24 EDT: NOTICE : Writing the stage make.conf to: /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20190314T090106Z/etc/portage/make.conf
23 Mar 2019 14:46:24 EDT: NOTICE : STICKY-CONFIG is enabled
23 Mar 2019 14:46:24 EDT: WARNING : The use of -* in livecd/use will cause portage to ignore
23 Mar 2019 14:46:24 EDT: WARNING : package.use in the profile and portage_confdir.
23 Mar 2019 14:46:24 EDT: WARNING : You've been warned!
23 Mar 2019 14:46:24 EDT: NOTICE : --- Running action sequence: setup_environment
23 Mar 2019 14:46:24 EDT: NOTICE : --- Running action sequence: build_packages
Copying livecd-stage1-chroot.sh to /tmp
copying livecd-stage1-chroot.sh to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20190314T090106Z/tmp
copying chroot-functions.sh to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20190314T090106Z/tmp
Ensure the file has the executable bit set
Running livecd-stage1-chroot.sh in chroot:
chroot /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20190314T090106Z /tmp/livecd-stage1-chroot.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot --update --newuse sys-apps/portage
>>> Emerging binary (1 of 1) sys-apps/portage-2.3.51-r1::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.51-r1::gentoo
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --update --deep --newuse app-accessibility/brltty app-admin/hddtemp app-admin/passook app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-crypt/gnupg app-editors/emacs app-editors/vim app-misc/screen app-portage/mirrorselect app-text/wgetpaste dev-util/debootstrap net-analyzer/traceroute net-dialup/mingetty net-dialup/rp-pppoe net-fs/cifs-utils net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-misc/vconfig net-proxy/dante sys-apps/ethtool sys-apps/hdparm sys-apps/hwsetup sys-apps/iproute2 sys-apps/pciutils sys-apps/sdparm sys-apps/usbutils sys-devel/bc sys-devel/binutils-hppa64 sys-devel/kgcc64 sys-fs/cryptsetup sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/lsscsi sys-fs/lsscsi sys-fs/lvm2 sys-fs/mdadm sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm www-client/links app-misc/livecd-tools
!!! The ebuild selected to satisfy ">=dev-util/glib-utils-2.56.4" has unmet requirements.
- dev-util/glib-utils-2.56.4::gentoo USE="" PYTHON_SINGLE_TARGET="-python3_5 -python3_6 (-python3_7)" PYTHON_TARGETS="-python3_5 -python3_6 (-python3_7)"
The following REQUIRED_USE flag constraints are unsatisfied:
exactly-one-of ( python_single_target_python3_5 python_single_target_python3_6 python_single_target_python3_7 )
The above constraints are a subset of the following complete expression:
exactly-one-of ( python_single_target_python3_5 python_single_target_python3_6 python_single_target_python3_7 ) python_single_target_python3_5? ( python_targets_python3_5 ) python_single_target_python3_6? ( python_targets_python3_6 ) python_single_target_python3_7? ( python_targets_python3_7 )
(dependency required by "dev-libs/glib-2.56.4::gentoo" [ebuild])
(dependency required by "net-irc/irssi-1.1.2::gentoo" [ebuild])
(dependency required by "net-irc/irssi" [argument])
23 Mar 2019 14:49:39 EDT: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/livecd-stage1-controller.sh', 'build_packages', 'app-accessibility/brltty', 'app-admin/hddtemp', 'app-admin/passook', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-arch/unzip', 'app-crypt/gnupg', 'app-editors/emacs', 'app-editors/vim', 'app-misc/screen', 'app-portage/mirrorselect', 'app-text/wgetpaste', 'dev-util/debootstrap', 'net-analyzer/traceroute', 'net-dialup/mingetty', 'net-dialup/rp-pppoe', 'net-fs/cifs-utils', 'net-fs/nfs-utils', 'net-irc/irssi', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ntp', 'net-misc/rdate', 'net-misc/vconfig', 'net-proxy/dante', 'sys-apps/ethtool', 'sys-apps/hdparm', 'sys-apps/hwsetup', 'sys-apps/iproute2', 'sys-apps/pciutils', 'sys-apps/sdparm', 'sys-apps/usbutils', 'sys-devel/bc', 'sys-devel/binutils-hppa64', 'sys-devel/kgcc64', 'sys-fs/cryptsetup', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/lsscsi', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/m
dadm', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-libs/gpm', 'www-client/links', 'app-misc/livecd-tools']) exited 1
23 Mar 2019 14:49:40 EDT: ERROR : CatalystError: livecdbuild aborting due to error.
23 Mar 2019 14:49:40 EDT: ERROR : Exception running action sequence build_packages
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1561, in build_packages
cmd(command, env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/livecd-stage1-controller.sh', 'build_packages', 'app-accessibility/brltty', 'app-admin/hddtemp', 'app-admin/passook', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-arch/unzip', 'app-crypt/gnupg', 'app-editors/emacs', 'app-editors/vim', 'app-misc/screen', 'app-portage/mirrorselect', 'app-text/wgetpaste', 'dev-util/debootstrap', 'net-analyzer/traceroute', 'net-dialup/mingetty', 'net-dialup/rp-pppoe', 'net-fs/cifs-utils', 'net-fs/nfs-utils', 'net-irc/irssi', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ntp', 'net-misc/rdate', 'net-misc/vconfig', 'net-proxy/dante', 'sys-apps/ethtool', 'sys-apps/hdparm', 'sys-apps/hwsetup', 'sys-apps/iproute2', 'sys-apps/pciutils', 'sys-apps/sdparm', 'sys-apps/usbutils', 'sys-devel/bc', 'sys-devel/binutils-hppa64', 'sys-devel/kgcc64', 'sys-fs/cryptsetup', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/lsscsi', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mdadm', 'sys-fs/reis
erfsprogs', 'sys-fs/xfsprogs', 'sys-libs/gpm', 'www-client/links', 'app-misc/livecd-tools']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1568, in build_packages
"build aborting due to error.")
catalyst.support.CatalystError: livecdbuild aborting due to error.
23 Mar 2019 14:49:40 EDT: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
405.27user 80.57system 9:18.09elapsed 87%CPU (0avgtext+0avgdata 42656maxresident)k
0inputs+0outputs (14major+1371141minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190314T090106Z.7t0AZI/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2019-06-02 17:20 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2019-06-02 17:20 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage1.spec
02 Jun 2019 13:20:26 EDT: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
02 Jun 2019 13:20:26 EDT: NOTICE : conf_values[options] = {'bindist', 'autoresume', 'pkgcache', 'snapcache', 'clear-autoresume'}
02 Jun 2019 13:20:26 EDT: NOTICE : Processing spec file: installcd-stage1.spec
02 Jun 2019 13:20:26 EDT: NOTICE : Using target: livecd-stage1
02 Jun 2019 13:20:27 EDT: NOTICE : Source file specification matching setting is: strict
02 Jun 2019 13:20:27 EDT: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
02 Jun 2019 13:20:32 EDT: NOTICE : Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20190601T093019Z.tar.bz2
02 Jun 2019 13:20:32 EDT: ERROR : CatalystError: Failed to create directory: /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20190601T093019Z
NoneType: None
Command exited with non-zero status 2
5.83user 1.86system 0:09.70elapsed 79%CPU (0avgtext+0avgdata 12628maxresident)k
0inputs+0outputs (30major+7217minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190601T093019Z.hfMrLu/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2019-09-06 19:44 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2019-09-06 19:44 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
checking for objdir... .libs
checking if hppa1.1-unknown-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no
checking for hppa1.1-unknown-linux-gnu-gcc option to produce PIC... -fPIC -DPIC
checking if hppa1.1-unknown-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes
checking if hppa1.1-unknown-linux-gnu-gcc static flag -static works... yes
checking if hppa1.1-unknown-linux-gnu-gcc supports -c -o file.o... yes
checking if hppa1.1-unknown-linux-gnu-gcc supports -c -o file.o... (cached) yes
checking whether the hppa1.1-unknown-linux-gnu-gcc linker (/usr/hppa1.1-unknown-linux-gnu/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for uuid_generate in -luuid... yes
checking for _et_list in -lcom_err... yes
checking for ANSI C header files... (cached) yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking for unistd.h... (cached) yes
checking uuid/uuid.h usability... yes
checking uuid/uuid.h presence... yes
checking for uuid/uuid.h... yes
checking whether sys/types.h defines makedev... no
checking sys/mkdev.h usability... no
checking sys/mkdev.h presence... no
checking for sys/mkdev.h... no
checking sys/sysmacros.h usability... yes
checking sys/sysmacros.h presence... yes
checking for sys/sysmacros.h... yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for size_t... yes
checking for struct stat.st_rdev... yes
checking whether -Wuninitialized works... yes
checking whether -Wno-unused-parameter works... yes
checking whether -Wredundant-decls works... yes
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... 64
checking size of off_t... 8
checking size of blkcnt_t... 8
checking whether hppa1.1-unknown-linux-gnu-gcc needs -traditional... no
checking for working memcmp... yes
checking for strftime... yes
checking for vprintf... yes
checking for _doprnt... no
checking for strerror... yes
checking for strstr... yes
checking for strtol... yes
checking for statfs... yes
checking for getmntent... yes
checking for hasmntopt... yes
checking for memset... yes
checking for time... yes
checking for uname... yes
checking for strptime... yes
checking for ctime_r... yes
checking for register_printf_modifier... yes
checking for register_printf_specifier... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating include/Makefile
config.status: creating mkreiserfs/Makefile
config.status: creating mkreiserfs/mkreiserfs.8
config.status: creating resize_reiserfs/Makefile
config.status: creating resize_reiserfs/resize_reiserfs.8
config.status: creating fsck/Makefile
config.status: creating fsck/reiserfsck.8
config.status: creating lib/Makefile
config.status: creating Makefile
config.status: creating reiserfscore/Makefile
config.status: creating reiserfscore/reiserfscore.pc
config.status: creating debugreiserfs/Makefile
config.status: creating debugreiserfs/debugreiserfs.8
config.status: creating tune/Makefile
config.status: creating tune/reiserfstune.8
config.status: creating include/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure:
Type 'make' to compile reiserfsprogs
Making all in include
make[1]: Entering directory '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25/include'
make all-am
make[2]: Entering directory '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25/include'
make[2]: Leaving directory '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25/include'
make[1]: Leaving directory '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25/include'
Making all in lib
make[1]: Entering directory '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25/lib'
/bin/sh ../libtool --tag=CC --mode=compile hppa1.1-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -I../include -O2 -pipe -march=1.1 -std=gnu89 -Wno-unused-parameter -Wredundant-decls -Wuninitialized -c -o io.lo io.c
libtool: compile: hppa1.1-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -I../include -O2 -pipe -march=1.1 -std=gnu89 -Wno-unused-parameter -Wredundant-decls -Wuninitialized -c io.c -fPIC -DPIC -o .libs/io.o
^[[01m^[[Kio.c:^[[m^[[K In function '^[[01m^[[Kopen_rollback_file^[[m^[[K':
^[[01m^[[Kio.c:606:2:^[[m^[[K ^[[01;35m^[[Kwarning: ^[[m^[[Kignoring return value of '^[[01m^[[Kfread^[[m^[[K', declared with attribute warn_unused_result [^[[01;35m^[[K-Wunused-result^[[m^[[K]
^[[01;35m^[[Kfread(string, 28, 1, s_rollback_file)^[[m^[[K;
^[[01;35m^[[K^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^[[m^[[K
^[[01m^[[Kio.c:616:2:^[[m^[[K ^[[01;35m^[[Kwarning: ^[[m^[[Kignoring return value of '^[[01m^[[Kfread^[[m^[[K', declared with attribute warn_unused_result [^[[01;35m^[[K-Wunused-result^[[m^[[K]
^[[01;35m^[[Kfread(&rollback_blocksize, sizeof(rollback_blocksize), 1,^[[m^[[K
^[[01;35m^[[K^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^[[m^[[K
^[[01;35m^[[K s_rollback_file)^[[m^[[K;
^[[01;35m^[[K~~~~~~~~~~~~~~~~^[[m^[[K
^[[01m^[[Kio.c:^[[m^[[K In function '^[[01m^[[Kdo_fsck_rollback^[[m^[[K':
^[[01m^[[Kio.c:707:2:^[[m^[[K ^[[01;35m^[[Kwarning: ^[[m^[[Kignoring return value of '^[[01m^[[Kfread^[[m^[[K', declared with attribute warn_unused_result [^[[01;35m^[[K-Wunused-result^[[m^[[K]
^[[01;35m^[[Kfread(&rollback_blocks_number, sizeof(rollback_blocks_number), 1,^[[m^[[K
^[[01;35m^[[K^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^[[m^[[K
^[[01;35m^[[K s_rollback_file)^[[m^[[K;
^[[01;35m^[[K~~~~~~~~~~~~~~~~^[[m^[[K
/bin/sh ../libtool --tag=CC --mode=compile hppa1.1-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -I../include -O2 -pipe -march=1.1 -std=gnu89 -Wno-unused-parameter -Wredundant-decls -Wuninitialized -c -o misc.lo misc.c
libtool: compile: hppa1.1-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -I../include -O2 -pipe -march=1.1 -std=gnu89 -Wno-unused-parameter -Wredundant-decls -Wuninitialized -c misc.c -fPIC -DPIC -o .libs/misc.o
/bin/sh ../libtool --tag=CC --mode=compile hppa1.1-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -I../include -O2 -pipe -march=1.1 -std=gnu89 -Wno-unused-parameter -Wredundant-decls -Wuninitialized -c -o parse_time.lo parse_time.c
libtool: compile: hppa1.1-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -I../include -O2 -pipe -march=1.1 -std=gnu89 -Wno-unused-parameter -Wredundant-decls -Wuninitialized -c parse_time.c -fPIC -DPIC -o .libs/parse_time.o
In file included from ^[[01m^[[Kparse_time.c:7^[[m^[[K:
^[[01m^[[K../include/misc.h:75:26:^[[m^[[K ^[[01;31m^[[Kerror: ^[[m^[[Kunknown type name '^[[01m^[[Kloff_t^[[m^[[K'; did you mean '^[[01m^[[Koff_t^[[m^[[K'?
int valid_offset(int fd, ^[[01;31m^[[Kloff_t^[[m^[[K offset);
^[[01;31m^[[K^~~~~~^[[m^[[K
^[[32m^[[Koff_t^[[m^[[K
In file included from ^[[01m^[[Kparse_time.c:8^[[m^[[K:
^[[01m^[[K../include/reiserfs_lib.h:300:55:^[[m^[[K ^[[01;31m^[[Kerror: ^[[m^[[Kunknown type name '^[[01m^[[Kloff_t^[[m^[[K'; did you mean '^[[01m^[[Koff_t^[[m^[[K'?
void set_offset(int format, struct reiserfs_key *key, ^[[01;31m^[[Kloff_t^[[m^[[K offset);
^[[01;31m^[[K^~~~~~^[[m^[[K
^[[32m^[[Koff_t^[[m^[[K
^[[01m^[[K../include/reiserfs_lib.h:301:64:^[[m^[[K ^[[01;31m^[[Kerror: ^[[m^[[Kunknown type name '^[[01m^[[Kloff_t^[[m^[[K'; did you mean '^[[01m^[[Koff_t^[[m^[[K'?
void set_type_and_offset(int format, struct reiserfs_key *key, ^[[01;31m^[[Kloff_t^[[m^[[K offset,
^[[01;31m^[[K^~~~~~^[[m^[[K
^[[32m^[[Koff_t^[[m^[[K
make[1]: *** [Makefile:369: parse_time.lo] Error 1
make[1]: Leaving directory '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25/lib'
make: *** [Makefile:377: all-recursive] Error 1
* ERROR: sys-fs/reiserfsprogs-3.6.25::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/reiserfsprogs-3.6.25::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/reiserfsprogs-3.6.25::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25'
* S: '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25'
* Messages for package sys-fs/eudev-3.2.5:
*
* As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package net-misc/vconfig-1.9:
* MTU problems exist for many ethernet drivers.
* Reduce the MTU on the interface to 1496 to work around them.
* Messages for package sys-fs/reiserfsprogs-3.6.25:
* ERROR: sys-fs/reiserfsprogs-3.6.25::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/reiserfsprogs-3.6.25::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/reiserfsprogs-3.6.25::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25'
* S: '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25'
06 Sep 2019 15:44:47 EDT: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/livecd-stage1-controller.sh', 'build_packages', 'app-accessibility/brltty', 'app-admin/hddtemp', 'app-admin/passook', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-arch/unzip', 'app-crypt/gnupg', 'app-editors/emacs', 'app-editors/vim', 'app-misc/screen', 'app-portage/mirrorselect', 'app-text/wgetpaste', 'dev-util/debootstrap', 'net-analyzer/traceroute', 'net-dialup/mingetty', 'net-dialup/rp-pppoe', 'net-fs/cifs-utils', 'net-fs/nfs-utils', 'net-irc/irssi', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ntp', 'net-misc/rdate', 'net-misc/vconfig', 'net-proxy/dante', 'sys-apps/ethtool', 'sys-apps/hdparm', 'sys-apps/hwsetup', 'sys-apps/iproute2', 'sys-apps/pciutils', 'sys-apps/sdparm', 'sys-apps/usbutils', 'sys-devel/bc', 'sys-devel/binutils-hppa64', 'sys-devel/kgcc64', 'sys-fs/cryptsetup', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/lsscsi', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/m
dadm', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-libs/gpm', 'www-client/links', 'app-misc/livecd-tools']) exited 1
06 Sep 2019 15:44:47 EDT: ERROR : CatalystError: livecdbuild aborting due to error.
06 Sep 2019 15:44:47 EDT: ERROR : Exception running action sequence build_packages
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1561, in build_packages
cmd(command, env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/livecd-stage1-controller.sh', 'build_packages', 'app-accessibility/brltty', 'app-admin/hddtemp', 'app-admin/passook', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-arch/unzip', 'app-crypt/gnupg', 'app-editors/emacs', 'app-editors/vim', 'app-misc/screen', 'app-portage/mirrorselect', 'app-text/wgetpaste', 'dev-util/debootstrap', 'net-analyzer/traceroute', 'net-dialup/mingetty', 'net-dialup/rp-pppoe', 'net-fs/cifs-utils', 'net-fs/nfs-utils', 'net-irc/irssi', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ntp', 'net-misc/rdate', 'net-misc/vconfig', 'net-proxy/dante', 'sys-apps/ethtool', 'sys-apps/hdparm', 'sys-apps/hwsetup', 'sys-apps/iproute2', 'sys-apps/pciutils', 'sys-apps/sdparm', 'sys-apps/usbutils', 'sys-devel/bc', 'sys-devel/binutils-hppa64', 'sys-devel/kgcc64', 'sys-fs/cryptsetup', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/lsscsi', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mdadm', 'sys-fs/reis
erfsprogs', 'sys-fs/xfsprogs', 'sys-libs/gpm', 'www-client/links', 'app-misc/livecd-tools']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1568, in build_packages
"build aborting due to error.")
catalyst.support.CatalystError: livecdbuild aborting due to error.
06 Sep 2019 15:44:47 EDT: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
3091.92user 3508.25system 1:55:04elapsed 95%CPU (0avgtext+0avgdata 55152maxresident)k
0inputs+0outputs (10major+22096224minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190901T093009Z.MqQfij/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2019-10-04 8:53 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2019-10-04 8:53 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
checking for objdir... .libs
checking if hppa1.1-unknown-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no
checking for hppa1.1-unknown-linux-gnu-gcc option to produce PIC... -fPIC -DPIC
checking if hppa1.1-unknown-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes
checking if hppa1.1-unknown-linux-gnu-gcc static flag -static works... yes
checking if hppa1.1-unknown-linux-gnu-gcc supports -c -o file.o... yes
checking if hppa1.1-unknown-linux-gnu-gcc supports -c -o file.o... (cached) yes
checking whether the hppa1.1-unknown-linux-gnu-gcc linker (/usr/hppa1.1-unknown-linux-gnu/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for uuid_generate in -luuid... yes
checking for _et_list in -lcom_err... yes
checking for ANSI C header files... (cached) yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking for unistd.h... (cached) yes
checking uuid/uuid.h usability... yes
checking uuid/uuid.h presence... yes
checking for uuid/uuid.h... yes
checking whether sys/types.h defines makedev... no
checking sys/mkdev.h usability... no
checking sys/mkdev.h presence... no
checking for sys/mkdev.h... no
checking sys/sysmacros.h usability... yes
checking sys/sysmacros.h presence... yes
checking for sys/sysmacros.h... yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for size_t... yes
checking for struct stat.st_rdev... yes
checking whether -Wuninitialized works... yes
checking whether -Wno-unused-parameter works... yes
checking whether -Wredundant-decls works... yes
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... 64
checking size of off_t... 8
checking size of blkcnt_t... 8
checking whether hppa1.1-unknown-linux-gnu-gcc needs -traditional... no
checking for working memcmp... yes
checking for strftime... yes
checking for vprintf... yes
checking for _doprnt... no
checking for strerror... yes
checking for strstr... yes
checking for strtol... yes
checking for statfs... yes
checking for getmntent... yes
checking for hasmntopt... yes
checking for memset... yes
checking for time... yes
checking for uname... yes
checking for strptime... yes
checking for ctime_r... yes
checking for register_printf_modifier... yes
checking for register_printf_specifier... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating include/Makefile
config.status: creating mkreiserfs/Makefile
config.status: creating mkreiserfs/mkreiserfs.8
config.status: creating resize_reiserfs/Makefile
config.status: creating resize_reiserfs/resize_reiserfs.8
config.status: creating fsck/Makefile
config.status: creating fsck/reiserfsck.8
config.status: creating lib/Makefile
config.status: creating Makefile
config.status: creating reiserfscore/Makefile
config.status: creating reiserfscore/reiserfscore.pc
config.status: creating debugreiserfs/Makefile
config.status: creating debugreiserfs/debugreiserfs.8
config.status: creating tune/Makefile
config.status: creating tune/reiserfstune.8
config.status: creating include/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure:
Type 'make' to compile reiserfsprogs
Making all in include
make[1]: Entering directory '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25/include'
make all-am
make[2]: Entering directory '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25/include'
make[2]: Leaving directory '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25/include'
make[1]: Leaving directory '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25/include'
Making all in lib
make[1]: Entering directory '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25/lib'
/bin/sh ../libtool --tag=CC --mode=compile hppa1.1-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -I../include -O2 -pipe -march=1.1 -std=gnu89 -Wno-unused-parameter -Wredundant-decls -Wuninitialized -c -o io.lo io.c
libtool: compile: hppa1.1-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -I../include -O2 -pipe -march=1.1 -std=gnu89 -Wno-unused-parameter -Wredundant-decls -Wuninitialized -c io.c -fPIC -DPIC -o .libs/io.o
^[[01m^[[Kio.c:^[[m^[[K In function '^[[01m^[[Kopen_rollback_file^[[m^[[K':
^[[01m^[[Kio.c:606:2:^[[m^[[K ^[[01;35m^[[Kwarning: ^[[m^[[Kignoring return value of '^[[01m^[[Kfread^[[m^[[K', declared with attribute warn_unused_result [^[[01;35m^[[K-Wunused-result^[[m^[[K]
^[[01;35m^[[Kfread(string, 28, 1, s_rollback_file)^[[m^[[K;
^[[01;35m^[[K^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^[[m^[[K
^[[01m^[[Kio.c:616:2:^[[m^[[K ^[[01;35m^[[Kwarning: ^[[m^[[Kignoring return value of '^[[01m^[[Kfread^[[m^[[K', declared with attribute warn_unused_result [^[[01;35m^[[K-Wunused-result^[[m^[[K]
^[[01;35m^[[Kfread(&rollback_blocksize, sizeof(rollback_blocksize), 1,^[[m^[[K
^[[01;35m^[[K^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^[[m^[[K
^[[01;35m^[[K s_rollback_file)^[[m^[[K;
^[[01;35m^[[K~~~~~~~~~~~~~~~~^[[m^[[K
^[[01m^[[Kio.c:^[[m^[[K In function '^[[01m^[[Kdo_fsck_rollback^[[m^[[K':
^[[01m^[[Kio.c:707:2:^[[m^[[K ^[[01;35m^[[Kwarning: ^[[m^[[Kignoring return value of '^[[01m^[[Kfread^[[m^[[K', declared with attribute warn_unused_result [^[[01;35m^[[K-Wunused-result^[[m^[[K]
^[[01;35m^[[Kfread(&rollback_blocks_number, sizeof(rollback_blocks_number), 1,^[[m^[[K
^[[01;35m^[[K^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^[[m^[[K
^[[01;35m^[[K s_rollback_file)^[[m^[[K;
^[[01;35m^[[K~~~~~~~~~~~~~~~~^[[m^[[K
/bin/sh ../libtool --tag=CC --mode=compile hppa1.1-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -I../include -O2 -pipe -march=1.1 -std=gnu89 -Wno-unused-parameter -Wredundant-decls -Wuninitialized -c -o misc.lo misc.c
libtool: compile: hppa1.1-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -I../include -O2 -pipe -march=1.1 -std=gnu89 -Wno-unused-parameter -Wredundant-decls -Wuninitialized -c misc.c -fPIC -DPIC -o .libs/misc.o
/bin/sh ../libtool --tag=CC --mode=compile hppa1.1-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -I../include -O2 -pipe -march=1.1 -std=gnu89 -Wno-unused-parameter -Wredundant-decls -Wuninitialized -c -o parse_time.lo parse_time.c
libtool: compile: hppa1.1-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -I../include -O2 -pipe -march=1.1 -std=gnu89 -Wno-unused-parameter -Wredundant-decls -Wuninitialized -c parse_time.c -fPIC -DPIC -o .libs/parse_time.o
In file included from ^[[01m^[[Kparse_time.c:7^[[m^[[K:
^[[01m^[[K../include/misc.h:75:26:^[[m^[[K ^[[01;31m^[[Kerror: ^[[m^[[Kunknown type name '^[[01m^[[Kloff_t^[[m^[[K'; did you mean '^[[01m^[[Koff_t^[[m^[[K'?
int valid_offset(int fd, ^[[01;31m^[[Kloff_t^[[m^[[K offset);
^[[01;31m^[[K^~~~~~^[[m^[[K
^[[32m^[[Koff_t^[[m^[[K
In file included from ^[[01m^[[Kparse_time.c:8^[[m^[[K:
^[[01m^[[K../include/reiserfs_lib.h:300:55:^[[m^[[K ^[[01;31m^[[Kerror: ^[[m^[[Kunknown type name '^[[01m^[[Kloff_t^[[m^[[K'; did you mean '^[[01m^[[Koff_t^[[m^[[K'?
void set_offset(int format, struct reiserfs_key *key, ^[[01;31m^[[Kloff_t^[[m^[[K offset);
^[[01;31m^[[K^~~~~~^[[m^[[K
^[[32m^[[Koff_t^[[m^[[K
^[[01m^[[K../include/reiserfs_lib.h:301:64:^[[m^[[K ^[[01;31m^[[Kerror: ^[[m^[[Kunknown type name '^[[01m^[[Kloff_t^[[m^[[K'; did you mean '^[[01m^[[Koff_t^[[m^[[K'?
void set_type_and_offset(int format, struct reiserfs_key *key, ^[[01;31m^[[Kloff_t^[[m^[[K offset,
^[[01;31m^[[K^~~~~~^[[m^[[K
^[[32m^[[Koff_t^[[m^[[K
make[1]: *** [Makefile:369: parse_time.lo] Error 1
make[1]: Leaving directory '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25/lib'
make: *** [Makefile:377: all-recursive] Error 1
* ERROR: sys-fs/reiserfsprogs-3.6.25::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/reiserfsprogs-3.6.25::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/reiserfsprogs-3.6.25::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25'
* S: '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25'
* Messages for package sys-fs/eudev-3.2.5:
*
* As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package net-misc/vconfig-1.9:
* MTU problems exist for many ethernet drivers.
* Reduce the MTU on the interface to 1496 to work around them.
* Messages for package sys-fs/reiserfsprogs-3.6.25:
* ERROR: sys-fs/reiserfsprogs-3.6.25::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/reiserfsprogs-3.6.25::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/reiserfsprogs-3.6.25::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25'
* S: '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25'
04 Oct 2019 04:52:52 EDT: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/livecd-stage1-controller.sh', 'build_packages', 'app-accessibility/brltty', 'app-admin/hddtemp', 'app-admin/passook', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-arch/unzip', 'app-crypt/gnupg', 'app-editors/emacs', 'app-editors/vim', 'app-misc/screen', 'app-portage/mirrorselect', 'app-text/wgetpaste', 'dev-util/debootstrap', 'net-analyzer/traceroute', 'net-dialup/mingetty', 'net-dialup/rp-pppoe', 'net-fs/cifs-utils', 'net-fs/nfs-utils', 'net-irc/irssi', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ntp', 'net-misc/rdate', 'net-misc/vconfig', 'net-proxy/dante', 'sys-apps/ethtool', 'sys-apps/hdparm', 'sys-apps/hwsetup', 'sys-apps/iproute2', 'sys-apps/pciutils', 'sys-apps/sdparm', 'sys-apps/usbutils', 'sys-devel/bc', 'sys-devel/binutils-hppa64', 'sys-devel/kgcc64', 'sys-fs/cryptsetup', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/lsscsi', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/m
dadm', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-libs/gpm', 'www-client/links', 'app-misc/livecd-tools']) exited 1
04 Oct 2019 04:52:58 EDT: ERROR : CatalystError: livecdbuild aborting due to error.
04 Oct 2019 04:52:58 EDT: ERROR : Exception running action sequence build_packages
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1561, in build_packages
cmd(command, env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/livecd-stage1-controller.sh', 'build_packages', 'app-accessibility/brltty', 'app-admin/hddtemp', 'app-admin/passook', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-arch/unzip', 'app-crypt/gnupg', 'app-editors/emacs', 'app-editors/vim', 'app-misc/screen', 'app-portage/mirrorselect', 'app-text/wgetpaste', 'dev-util/debootstrap', 'net-analyzer/traceroute', 'net-dialup/mingetty', 'net-dialup/rp-pppoe', 'net-fs/cifs-utils', 'net-fs/nfs-utils', 'net-irc/irssi', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ntp', 'net-misc/rdate', 'net-misc/vconfig', 'net-proxy/dante', 'sys-apps/ethtool', 'sys-apps/hdparm', 'sys-apps/hwsetup', 'sys-apps/iproute2', 'sys-apps/pciutils', 'sys-apps/sdparm', 'sys-apps/usbutils', 'sys-devel/bc', 'sys-devel/binutils-hppa64', 'sys-devel/kgcc64', 'sys-fs/cryptsetup', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/lsscsi', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mdadm', 'sys-fs/reis
erfsprogs', 'sys-fs/xfsprogs', 'sys-libs/gpm', 'www-client/links', 'app-misc/livecd-tools']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1568, in build_packages
"build aborting due to error.")
catalyst.support.CatalystError: livecdbuild aborting due to error.
04 Oct 2019 04:52:58 EDT: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
1429.18user 616.30system 1:09:52elapsed 48%CPU (0avgtext+0avgdata 55564maxresident)k
0inputs+0outputs (77major+6472683minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191001T093029Z.ylQ6j8/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2020-01-04 5:55 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2020-01-04 5:55 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage1.spec
04 Jan 2020 00:55:30 EST: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
04 Jan 2020 00:55:30 EST: NOTICE : conf_values[options] = {'bindist', 'pkgcache', 'autoresume', 'clear-autoresume', 'snapcache'}
04 Jan 2020 00:55:30 EST: NOTICE : Processing spec file: installcd-stage1.spec
04 Jan 2020 00:55:31 EST: NOTICE : Using target: livecd-stage1
04 Jan 2020 00:55:31 EST: NOTICE : Source file specification matching setting is: strict
04 Jan 2020 00:55:31 EST: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
04 Jan 2020 00:55:36 EST: ERROR : CatalystError: File Not Found: /usr/local/catalyst/builds/default/stage3-hppa1.1-20200101T103009Z
Command exited with non-zero status 2
2.52user 0.60system 0:09.33elapsed 33%CPU (0avgtext+0avgdata 13100maxresident)k
109352inputs+8outputs (32major+6833minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200101T103009Z.JEJUAW/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2020-02-04 3:38 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2020-02-04 3:38 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage1.spec
03 Feb 2020 22:38:35 EST: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
03 Feb 2020 22:38:35 EST: NOTICE : conf_values[options] = {'clear-autoresume', 'snapcache', 'autoresume', 'pkgcache', 'bindist'}
03 Feb 2020 22:38:35 EST: NOTICE : Processing spec file: installcd-stage1.spec
03 Feb 2020 22:38:36 EST: NOTICE : Using target: livecd-stage1
03 Feb 2020 22:38:36 EST: NOTICE : Source file specification matching setting is: strict
03 Feb 2020 22:38:36 EST: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
03 Feb 2020 22:38:40 EST: ERROR : CatalystError: File Not Found: /usr/local/catalyst/builds/default/stage3-hppa1.1-20200201T103029Z
Command exited with non-zero status 2
2.47user 0.66system 0:07.93elapsed 39%CPU (0avgtext+0avgdata 13796maxresident)k
109864inputs+8outputs (24major+6900minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200201T103029Z.OponEd/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2020-03-10 5:32 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2020-03-10 5:32 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage1.spec
10 Mar 2020 01:32:27 EDT: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
10 Mar 2020 01:32:27 EDT: NOTICE : conf_values[options] = {'pkgcache', 'clear-autoresume', 'snapcache', 'autoresume', 'bindist'}
10 Mar 2020 01:32:31 EDT: NOTICE : Processing spec file: installcd-stage1.spec
10 Mar 2020 01:32:36 EDT: NOTICE : Using target: livecd-stage1
10 Mar 2020 01:32:37 EDT: NOTICE : Source file specification matching setting is: strict
10 Mar 2020 01:32:37 EDT: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
10 Mar 2020 01:32:50 EDT: ERROR : CatalystError: File Not Found: /usr/local/catalyst/builds/default/stage3-hppa1.1-20200301T103020Z
Command exited with non-zero status 2
2.81user 0.86system 0:42.18elapsed 8%CPU (0avgtext+0avgdata 13264maxresident)k
113552inputs+16outputs (56major+6943minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200301T103020Z.qvRacr/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2020-03-19 1:10 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2020-03-19 1:10 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage1.spec
18 Mar 2020 20:58:49 EDT: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
18 Mar 2020 20:58:49 EDT: NOTICE : conf_values[options] = {'seedcache', 'kerncache', 'clear-autoresume', 'pkgcache', 'snapcache', 'autoresume', 'bindist'}
18 Mar 2020 20:58:50 EDT: NOTICE : Processing spec file: installcd-stage1.spec
18 Mar 2020 20:58:51 EDT: NOTICE : Using target: livecd-stage1
18 Mar 2020 20:58:51 EDT: NOTICE : Source file specification matching setting is: strict
18 Mar 2020 20:58:51 EDT: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
18 Mar 2020 20:58:53 EDT: NOTICE : Source path set to /usr/local/catalyst/tmp/default/stage3-hppa1.1-20200316T222016Z/
18 Mar 2020 20:58:54 EDT: NOTICE : Removing AutoResume Points ...
18 Mar 2020 20:58:54 EDT: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20200316T222016Z
18 Mar 2020 20:58:54 EDT: NOTICE : --- Running action sequence: unpack
18 Mar 2020 20:58:54 EDT: NOTICE : Resume: "seed source" unpack resume point is disabled
18 Mar 2020 20:58:54 EDT: NOTICE : Resume: Target chroot is invalid, cleaning up...
18 Mar 2020 20:58:54 EDT: NOTICE : Removing AutoResume Points ...
18 Mar 2020 20:58:54 EDT: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/.autoresume-livecd-stage1-hppa1.1-20200316T222016Z
18 Mar 2020 20:58:54 EDT: NOTICE : Clearing the chroot path ...
18 Mar 2020 20:58:54 EDT: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20200316T222016Z
18 Mar 2020 20:58:54 EDT: NOTICE : Starting rsync from /usr/local/catalyst/tmp/default/stage3-hppa1.1-20200316T222016Z/
18 Mar 2020 20:58:54 EDT: NOTICE : to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20200316T222016Z (this may take some time) ..
18 Mar 2020 21:02:11 EDT: NOTICE : --- Running action sequence: unpack_snapshot
18 Mar 2020 21:02:11 EDT: NOTICE : --- Running action sequence: config_profile_link
18 Mar 2020 21:02:11 EDT: NOTICE : --- Running action sequence: setup_confdir
18 Mar 2020 21:02:12 EDT: NOTICE : --- Running action sequence: portage_overlay
18 Mar 2020 21:02:12 EDT: NOTICE : --- Running action sequence: bind
18 Mar 2020 21:02:16 EDT: NOTICE : --- Running action sequence: chroot_setup
18 Mar 2020 21:02:16 EDT: NOTICE : Setting up chroot...
18 Mar 2020 21:02:17 EDT: WARNING : Overriding certain env variables may cause catastrophic failure.
18 Mar 2020 21:02:17 EDT: WARNING : If your build fails look here first as the possible problem.
18 Mar 2020 21:02:17 EDT: WARNING : Catalyst assumes you know what you are doing when setting these variables.
18 Mar 2020 21:02:17 EDT: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
18 Mar 2020 21:02:17 EDT: WARNING : You have been warned.
18 Mar 2020 21:02:17 EDT: NOTICE : Writing the stage make.conf to: /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20200316T222016Z/etc/portage/make.conf
18 Mar 2020 21:02:17 EDT: NOTICE : STICKY-CONFIG is enabled
18 Mar 2020 21:02:17 EDT: WARNING : The use of -* in livecd/use will cause portage to ignore
18 Mar 2020 21:02:17 EDT: WARNING : package.use in the profile and portage_confdir.
18 Mar 2020 21:02:17 EDT: WARNING : You've been warned!
18 Mar 2020 21:02:17 EDT: NOTICE : --- Running action sequence: setup_environment
18 Mar 2020 21:02:17 EDT: NOTICE : --- Running action sequence: build_packages
Copying livecd-stage1-chroot.sh to /tmp
copying livecd-stage1-chroot.sh to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20200316T222016Z/tmp
copying chroot-functions.sh to /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20200316T222016Z/tmp
Ensure the file has the executable bit set
Running livecd-stage1-chroot.sh in chroot:
chroot /usr/local/catalyst/tmp/default/livecd-stage1-hppa1.1-20200316T222016Z /tmp/livecd-stage1-chroot.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-apps/portage-2.3.89-r1
* Determining the location of the kernel source code
* Unable to find kernel sources at /usr/src/linux
* Please make sure that /usr/src/linux points at your running kernel,
* (or the kernel you wish to build against).
* Alternatively, set the KERNEL_DIR environment variable to the kernel sources location
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - IPC_NS
* - PID_NS
* - NET_NS
* You're on your own to make sure they are set if needed.
>>> Emerging (1 of 3) dev-libs/openssl-1.1.1d-r3::gentoo
Full build log at /tmp/catalyst-auto.20200316T222016Z.tP5JVM/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2021-09-23 1:49 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2021-09-23 1:49 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20210923T014117Z.Zx8dgT/specs/installcd-stage1.spec
22 Sep 2021 21:49:00 EDT: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
22 Sep 2021 21:49:00 EDT: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'ccache', 'kerncache', 'pkgcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'ccache', 'kerncache', 'pkgcache', 'clear-autoresume']
22 Sep 2021 21:49:00 EDT: NOTICE : Processing spec file: /tmp/catalyst-auto.20210923T014117Z.Zx8dgT/specs/installcd-stage1.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20210923T014117Z.Zx8dgT/specs/installcd-stage1.spec
22 Sep 2021 21:49:01 EDT: NOTICE : Using target: livecd-stage1
NOTICE:catalyst:Using target: livecd-stage1
22 Sep 2021 21:49:01 EDT: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
NOTICE:catalyst:Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
22 Sep 2021 21:49:01 EDT: ERROR : CatalystError: File Not Found: /usr/local/catalyst/builds/default/stage3-hppa1.1-20210923T014117Z
ERROR:catalyst:CatalystError: File Not Found: /usr/local/catalyst/builds/default/stage3-hppa1.1-20210923T014117Z
Command exited with non-zero status 2
4.23user 0.55system 0:04.89elapsed 97%CPU (0avgtext+0avgdata 19748maxresident)k
0inputs+8outputs (0major+8654minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20210923T014117Z.Zx8dgT/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2021-10-07 22:50 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2021-10-07 22:50 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20211007T223630Z.TroyXx/specs/installcd-stage1.spec
07 Oct 2021 18:50:53 EDT: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
07 Oct 2021 18:50:53 EDT: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'ccache', 'kerncache', 'pkgcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'ccache', 'kerncache', 'pkgcache', 'clear-autoresume']
07 Oct 2021 18:50:53 EDT: NOTICE : Processing spec file: /tmp/catalyst-auto.20211007T223630Z.TroyXx/specs/installcd-stage1.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20211007T223630Z.TroyXx/specs/installcd-stage1.spec
07 Oct 2021 18:50:53 EDT: NOTICE : Using target: livecd-stage1
NOTICE:catalyst:Using target: livecd-stage1
07 Oct 2021 18:50:53 EDT: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
NOTICE:catalyst:Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
07 Oct 2021 18:50:53 EDT: ERROR : CatalystError: File Not Found: /usr/local/catalyst/builds/default/stage3-hppa1.1-20211007T223630Z
ERROR:catalyst:CatalystError: File Not Found: /usr/local/catalyst/builds/default/stage3-hppa1.1-20211007T223630Z
Command exited with non-zero status 2
4.23user 0.59system 0:05.45elapsed 88%CPU (0avgtext+0avgdata 20028maxresident)k
8inputs+8outputs (0major+8628minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20211007T223630Z.TroyXx/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2022-01-19 0:58 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2022-01-19 0:58 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20220119T003659Z.KDLdm4/specs/installcd-stage1.spec
18 Jan 2022 19:58:18 EST: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
18 Jan 2022 19:58:18 EST: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'ccache', 'kerncache', 'pkgcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'ccache', 'kerncache', 'pkgcache', 'clear-autoresume']
18 Jan 2022 19:58:18 EST: NOTICE : Processing spec file: /tmp/catalyst-auto.20220119T003659Z.KDLdm4/specs/installcd-stage1.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20220119T003659Z.KDLdm4/specs/installcd-stage1.spec
18 Jan 2022 19:58:18 EST: NOTICE : Using target: livecd-stage1
NOTICE:catalyst:Using target: livecd-stage1
18 Jan 2022 19:58:18 EST: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
NOTICE:catalyst:Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
18 Jan 2022 19:58:18 EST: ERROR : CatalystError: File Not Found: /usr/local/catalyst/builds/default/stage3-hppa1.1-20220119T003659Z
ERROR:catalyst:CatalystError: File Not Found: /usr/local/catalyst/builds/default/stage3-hppa1.1-20220119T003659Z
Command exited with non-zero status 2
4.01user 0.63system 0:04.95elapsed 93%CPU (0avgtext+0avgdata 19696maxresident)k
8inputs+8outputs (0major+8678minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20220119T003659Z.KDLdm4/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2022-01-19 3:47 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2022-01-19 3:47 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20220119T003659Z.4DYz9x/specs/installcd-stage1.spec
18 Jan 2022 22:46:56 EST: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
18 Jan 2022 22:46:56 EST: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'ccache', 'kerncache', 'pkgcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'ccache', 'kerncache', 'pkgcache', 'clear-autoresume']
18 Jan 2022 22:46:56 EST: NOTICE : Processing spec file: /tmp/catalyst-auto.20220119T003659Z.4DYz9x/specs/installcd-stage1.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20220119T003659Z.4DYz9x/specs/installcd-stage1.spec
18 Jan 2022 22:46:58 EST: NOTICE : Using target: livecd-stage1
NOTICE:catalyst:Using target: livecd-stage1
18 Jan 2022 22:46:59 EST: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
NOTICE:catalyst:Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
18 Jan 2022 22:46:59 EST: ERROR : CatalystError: File Not Found: /usr/local/catalyst/builds/default/stage3-hppa1.1-20220119T003659Z
ERROR:catalyst:CatalystError: File Not Found: /usr/local/catalyst/builds/default/stage3-hppa1.1-20220119T003659Z
Command exited with non-zero status 2
4.61user 0.50system 0:23.71elapsed 21%CPU (0avgtext+0avgdata 19340maxresident)k
8inputs+8outputs (0major+8662minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20220119T003659Z.4DYz9x/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2022-01-19 6:30 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2022-01-19 6:30 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20220119T042151Z.rmLaP2/specs/installcd-stage1.spec
Command exited with non-zero status 1
2.97user 0.27system 0:06.93elapsed 46%CPU (0avgtext+0avgdata 18036maxresident)k
0inputs+8outputs (0major+2874minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20220119T042151Z.rmLaP2/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2022-01-19 8:10 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2022-01-19 8:10 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20220119T073656Z.1NOCrN/specs/installcd-stage1.spec
19 Jan 2022 03:10:32 EST: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
19 Jan 2022 03:10:32 EST: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'ccache', 'kerncache', 'pkgcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'ccache', 'kerncache', 'pkgcache', 'clear-autoresume']
19 Jan 2022 03:10:32 EST: NOTICE : Processing spec file: /tmp/catalyst-auto.20220119T073656Z.1NOCrN/specs/installcd-stage1.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20220119T073656Z.1NOCrN/specs/installcd-stage1.spec
19 Jan 2022 03:10:33 EST: NOTICE : Using target: livecd-stage1
NOTICE:catalyst:Using target: livecd-stage1
Command exited with non-zero status 1
4.27user 0.61system 0:11.40elapsed 42%CPU (0avgtext+0avgdata 19172maxresident)k
8inputs+8outputs (0major+8433minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20220119T073656Z.1NOCrN/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2022-01-19 8:26 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2022-01-19 8:26 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20220119T080705Z.Ftf8V5/specs/installcd-stage1.spec
Command exited with non-zero status 1
2.97user 0.35system 0:04.81elapsed 69%CPU (0avgtext+0avgdata 17868maxresident)k
0inputs+8outputs (0major+2883minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20220119T080705Z.Ftf8V5/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec
@ 2022-01-31 14:02 catalyst
0 siblings, 0 replies; 116+ messages in thread
From: catalyst @ 2022-01-31 14:02 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* (Note: Above message is only printed the first time package is
* installed. Please look at /usr/share/doc/hddtemp-0.3_beta15-r29/README.gentoo*
* for future reference)
* Messages for package net-misc/vconfig-1.9:
* MTU problems exist for many ethernet drivers.
* Reduce the MTU on the interface to 1496 to work around them.
* Messages for package sys-apps/coreutils-8.32-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package acct-user/sockd-0-r1:
* Adding user 'sockd' to your system ...
* - Userid: 214
* - Shell: /sbin/nologin
* - Home: /dev/null
* - Groups: sockd
* - GECOS: added by portage for sockd
* Updating comment for user 'sockd' ...
* - Comment: A user for net-proxy/dante
* Messages for package acct-user/ntp-0-r1:
* Adding user 'ntp' to your system ...
* - Userid: 123
* - Shell: /sbin/nologin
* - Home: /dev/null
* - Groups: ntp
* - GECOS: added by portage for ntp
* Updating comment for user 'ntp' ...
* - Comment: user for ntp daemon
* Messages for package net-misc/dhcpcd-9.4.0-r1:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package app-emacs/emacs-common-1.8:
* All site initialisation for Gentoo-installed packages is added to
* /usr/share/emacs/site-lisp/site-gentoo.el. In order for this site
* initialisation to be loaded for all users automatically, a default
* site startup file /etc/emacs/site-start.el is installed. You are
* responsible for maintenance of this file.
*
* Alternatively, individual users can add the following command:
*
* (require 'site-gentoo)
*
* to their ~/.emacs initialisation files, or, for greater flexibility,
* users may load single package-specific initialisation files from the
* /usr/share/emacs/site-lisp/site-gentoo.d/ directory.
*
* (Note: Above message is only printed the first time package is
* installed. Please look at /usr/share/doc/emacs-common-1.8/README.gentoo*
* for future reference)
* Messages for package sys-apps/util-linux-2.37.2-r1:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-libs/glibc-2.33-r7:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /usr/lib/locale/locale-archive
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-libs/glibc-2.33-r7' merged despite file collisions. If
* necessary, refer to your elog messages for the whole content of the
* above message.
* Messages for package app-editors/emacs-27.2-r5:
* You can set the version to be started by /usr/bin/emacs through the
* Emacs eselect module, which also redirects man and info pages.
* Therefore, several Emacs versions can be installed at the same time.
* "man emacs.eselect" for details.
*
* If you upgrade from a previous major version of Emacs, then it is
* strongly recommended that you use app-admin/emacs-updater to rebuild
* all byte-compiled elisp files of the installed Emacs packages.
*
* (Note: Above message is only printed the first time package is
* installed. Please look at /usr/share/doc/emacs-27.2-r5/README.gentoo*
* for future reference)
* Messages for package dev-lang/python-3.10.0_p1-r1:
* You have configured Python without XML support.
* This is NOT a recommended configuration as you
* may face problems parsing any XML documents.
* Messages for package sys-fs/mdadm-4.1:
* If you're not relying on kernel auto-detect of your RAID
* devices, you need to add 'mdraid' to your 'boot' runlevel:
* rc-update add mdraid boot
* Messages for package media-sound/alsa-utils-1.2.4:
*
* To take advantage of the init script, and automate the process of
* saving and restoring sound-card mixer levels you should
* add alsasound to the boot runlevel. You can do this as
* root like so:
* # rc-update add alsasound boot
*
* The ALSA core should be built into the kernel or loaded through other
* means. There is no longer any modular auto(un)loading in alsa-utils.
* Messages for package dev-libs/glib-2.68.4:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* ERROR: dev-libs/glib-2.68.4::gentoo failed (compile phase):
* compile failed
*
* Call stack:
* ebuild.sh, line 127: Called src_compile
* environment, line 4321: Called meson-multilib_src_compile
* environment, line 2875: Called multilib-minimal_src_compile
* environment, line 3084: Called multilib_foreach_abi 'multilib-minimal_abi_src_compile'
* environment, line 3351: Called multibuild_foreach_variant '_multilib_multibuild_wrapper' 'multilib-minimal_abi_src_compile'
* environment, line 3044: Called _multibuild_run '_multilib_multibuild_wrapper' 'multilib-minimal_abi_src_compile'
* environment, line 3042: Called _multilib_multibuild_wrapper 'multilib-minimal_abi_src_compile'
* environment, line 734: Called multilib-minimal_abi_src_compile
* environment, line 3078: Called multilib_src_compile
* environment, line 3563: Called meson_src_compile
* environment, line 2934: Called die
* The specific snippet of code:
* "$@" || die "compile failed"
*
* If you need support, post the output of `emerge --info '=dev-libs/glib-2.68.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-libs/glib-2.68.4::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-libs/glib-2.68.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-libs/glib-2.68.4/temp/environment'.
* Working directory: '/var/tmp/portage/dev-libs/glib-2.68.4/work/glib-2.68.4-.hppa'
* S: '/var/tmp/portage/dev-libs/glib-2.68.4/work/glib-2.68.4'
!!! existing preserved libs found
31 Jan 2022 09:02:13 EST: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/controller.sh', 'build_packages', 'app-admin/hddtemp', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-arch/unzip', 'app-crypt/gnupg', 'app-editors/emacs', 'app-editors/vim', 'app-misc/livecd-tools', 'app-misc/screen', 'app-portage/mirrorselect', 'app-text/wgetpaste', 'dev-util/debootstrap', 'net-analyzer/traceroute', 'net-fs/nfs-utils', 'net-irc/irssi', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ntp', 'net-misc/rdate', 'net-misc/vconfig', 'net-proxy/dante', 'sys-apps/ethtool', 'sys-apps/hdparm', 'sys-apps/iproute2', 'sys-apps/pciutils', 'sys-apps/sdparm', 'sys-apps/usbutils', 'sys-devel/bc', 'sys-devel/binutils-hppa64', 'sys-devel/kgcc64', 'sys-fs/cryptsetup', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mdadm', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-libs/gpm', 'www-client/links']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/controller.sh', 'build_packages', 'app-admin/hddtemp', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-arch/unzip', 'app-crypt/gnupg', 'app-editors/emacs', 'app-editors/vim', 'app-misc/livecd-tools', 'app-misc/screen', 'app-portage/mirrorselect', 'app-text/wgetpaste', 'dev-util/debootstrap', 'net-analyzer/traceroute', 'net-fs/nfs-utils', 'net-irc/irssi', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ntp', 'net-misc/rdate', 'net-misc/vconfig', 'net-proxy/dante', 'sys-apps/ethtool', 'sys-apps/hdparm', 'sys-apps/iproute2', 'sys-apps/pciutils', 'sys-apps/sdparm', 'sys-apps/usbutils', 'sys-devel/bc', 'sys-devel/binutils-hppa64', 'sys-devel/kgcc64', 'sys-fs/cryptsetup', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mdadm', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-libs/gpm', 'www-client/links']) exited 1
31 Jan 2022 09:02:13 EST: ERROR : Exception running action sequence build_packages
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1479, in build_packages
cmd(command, env=self.env)
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/controller.sh', 'build_packages', 'app-admin/hddtemp', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-arch/unzip', 'app-crypt/gnupg', 'app-editors/emacs', 'app-editors/vim', 'app-misc/livecd-tools', 'app-misc/screen', 'app-portage/mirrorselect', 'app-text/wgetpaste', 'dev-util/debootstrap', 'net-analyzer/traceroute', 'net-fs/nfs-utils', 'net-irc/irssi', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ntp', 'net-misc/rdate', 'net-misc/vconfig', 'net-proxy/dante', 'sys-apps/ethtool', 'sys-apps/hdparm', 'sys-apps/iproute2', 'sys-apps/pciutils', 'sys-apps/sdparm', 'sys-apps/usbutils', 'sys-devel/bc', 'sys-devel/binutils-hppa64', 'sys-devel/kgcc64', 'sys-fs/cryptsetup', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mdadm', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-libs/gpm', 'www-client/links']) exited 1
ERROR:catalyst:Exception running action sequence build_packages
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1479, in build_packages
cmd(command, env=self.env)
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/controller.sh', 'build_packages', 'app-admin/hddtemp', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-arch/unzip', 'app-crypt/gnupg', 'app-editors/emacs', 'app-editors/vim', 'app-misc/livecd-tools', 'app-misc/screen', 'app-portage/mirrorselect', 'app-text/wgetpaste', 'dev-util/debootstrap', 'net-analyzer/traceroute', 'net-fs/nfs-utils', 'net-irc/irssi', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ntp', 'net-misc/rdate', 'net-misc/vconfig', 'net-proxy/dante', 'sys-apps/ethtool', 'sys-apps/hdparm', 'sys-apps/iproute2', 'sys-apps/pciutils', 'sys-apps/sdparm', 'sys-apps/usbutils', 'sys-devel/bc', 'sys-devel/binutils-hppa64', 'sys-devel/kgcc64', 'sys-fs/cryptsetup', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mdadm', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-libs/gpm', 'www-client/links']) exited 1
Command exited with non-zero status 2
177883.62user 49884.65system 67:14:41elapsed 5%CPU (0avgtext+0avgdata 436976maxresident)k
2176122inputs+32858552outputs (6846major+385437544minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20220119T080705Z.ixzrv2/log/installcd-stage1.log
^ permalink raw reply [flat|nested] 116+ messages in thread
end of thread, other threads:[~2022-01-31 14:02 UTC | newest]
Thread overview: 116+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-03-10 5:32 [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - installcd-stage1.spec catalyst
-- strict thread matches above, loose matches on Subject: below --
2022-01-31 14:02 catalyst
2022-01-19 8:26 catalyst
2022-01-19 8:10 catalyst
2022-01-19 6:30 catalyst
2022-01-19 3:47 catalyst
2022-01-19 0:58 catalyst
2021-10-07 22:50 catalyst
2021-09-23 1:49 catalyst
2020-03-19 1:10 catalyst
2020-02-04 3:38 catalyst
2020-01-04 5:55 catalyst
2019-10-04 8:53 catalyst
2019-09-06 19:44 catalyst
2019-06-02 17:20 catalyst
2019-03-23 18:49 catalyst
2019-03-07 5:55 catalyst
2019-03-05 4:51 catalyst
2019-03-03 3:16 catalyst
2019-02-02 12:11 catalyst
2019-01-03 17:52 catalyst
2018-12-05 17:12 catalyst
2018-09-28 8:49 catalyst
2018-09-25 20:00 catalyst
2018-09-14 18:19 catalyst
2018-09-08 3:05 catalyst
2018-08-03 17:16 catalyst
2018-07-18 6:46 catalyst
2018-07-04 20:29 catalyst
2018-06-21 18:37 catalyst
2018-06-09 17:26 catalyst
2018-05-30 2:57 catalyst
2018-05-11 18:33 catalyst
2018-04-28 15:53 catalyst
2018-04-14 20:33 catalyst
2018-04-08 19:50 catalyst
2018-03-25 7:30 catalyst
2018-02-23 3:33 catalyst
2017-12-19 9:46 catalyst
2017-12-04 8:11 catalyst
2017-11-26 12:12 catalyst
2017-11-03 16:01 catalyst
2017-10-24 21:33 catalyst
2016-03-16 23:42 catalyst
2016-03-16 21:56 catalyst
2016-01-29 14:19 catalyst
2016-01-22 14:08 catalyst
2016-01-15 13:37 catalyst
2016-01-08 13:31 catalyst
2016-01-01 13:35 catalyst
2015-12-25 13:31 catalyst
2015-12-18 13:30 catalyst
2015-12-11 13:30 catalyst
2015-09-14 21:22 catalyst
2015-09-07 20:39 catalyst
2015-08-31 23:09 catalyst
2015-08-24 21:40 catalyst
2015-08-18 2:42 catalyst
2015-08-11 3:27 catalyst
2015-08-03 22:33 catalyst
2015-07-27 20:32 catalyst
2015-07-21 7:25 catalyst
2015-07-13 19:43 catalyst
2015-07-06 20:56 catalyst
2015-06-29 18:36 catalyst
2015-06-23 4:56 catalyst
2015-06-13 8:24 catalyst
2015-06-06 16:58 catalyst
2015-06-01 15:12 catalyst
2015-05-25 4:56 catalyst
2015-05-17 18:19 catalyst
2015-05-10 18:02 catalyst
2015-05-03 21:19 catalyst
2015-04-27 16:49 catalyst
2015-04-21 0:31 catalyst
2015-04-13 18:05 catalyst
2015-04-08 1:02 catalyst
2015-03-27 7:54 catalyst
2015-03-20 8:06 catalyst
2015-03-13 7:57 catalyst
2015-03-06 9:32 catalyst
2015-02-27 15:50 catalyst
2015-02-20 9:11 catalyst
2015-02-13 9:00 catalyst
2015-02-06 8:59 catalyst
2015-01-30 8:59 catalyst
2015-01-23 8:58 catalyst
2015-01-22 19:33 catalyst
2015-01-09 8:52 catalyst
2015-01-02 18:46 catalyst
2015-01-02 9:15 catalyst
2014-12-26 8:52 catalyst
2014-12-19 8:54 catalyst
2014-12-12 9:39 catalyst
2014-12-10 14:31 catalyst
2014-12-02 9:12 catalyst
2014-11-24 21:19 catalyst
2014-11-19 23:36 catalyst
2014-11-13 6:26 catalyst
2014-11-03 22:31 catalyst
2014-10-28 18:05 catalyst
2014-10-18 9:48 catalyst
2014-10-10 7:48 catalyst
2014-10-03 7:49 catalyst
2014-09-26 7:55 catalyst
2014-09-19 7:58 catalyst
2014-09-09 14:11 catalyst
2014-09-02 11:37 catalyst
2014-08-27 5:41 catalyst
2014-08-15 7:57 catalyst
2014-08-08 7:57 catalyst
2014-08-01 7:57 catalyst
2014-07-25 7:57 catalyst
2014-07-18 7:59 catalyst
2014-07-11 7:55 catalyst
2014-07-04 7:57 catalyst
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox