* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-12-08 5:59 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-12-08 5:59 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.5.3.3^[[0m
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191208T031010Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191208T031010Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191208T031010Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191208T031010Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Thermal Zone (ACPI_THERMAL) [Y/n/m/?] y
^[[31;01m*^[[0m NUMA support (ACPI_NUMA) [Y/?] y
^[[31;01m*^[[0m Debug Statements (ACPI_DEBUG) [N/y/?] n
^[[31;01m*^[[0m PCI slot detection driver (ACPI_PCI_SLOT) [N/y/?] n
^[[31;01m*^[[0m Container and Module Devices (ACPI_CONTAINER) [Y/?] y
^[[31;01m*^[[0m Hardware ^[[1m^[[KError ^[[m^[[KDevice (ACPI_HED) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Bus options (PCI, PCMCIA)
^[[31;01m*^[[0m
^[[31;01m*^[[0mPCI support (PCI) [Y/?] y
^[[31;01m*^[[0mPCI Express Port Bus support (PCIEPORTBUS) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Hotplug driver (HOTPLUG_PCI_PCIE) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Advanced ^[[1m^[[KError ^[[m^[[KReporting support (PCIEAER) [Y/n/?] y
^[[31;01m*^[[0m PCI Express ^[[1m^[[Kerror ^[[m^[[Kinjection support (PCIEAER_INJECT) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Inter-FE based on IETF ForCES InterFE LFB
^[[31;01m*^[[0m *
^[[31;01m*^[[0m Inter-FE based on IETF ForCES InterFE LFB (NET_IFE) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Network light weight tunnels (LWTUNNEL) [N/y/?] (NEW)
^[[31;01m*^[[0m Network physical/parent device Netlink interface (NET_DEVLINK) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Generic ^[[1m^[[Kfail^[[m^[[Kover module (^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSCSI OnStream SC-x0 tape support (CHR_DEV_OSST) [N/m/y/?] n
^[[31;01m*^[[0mSCSI CDROM support (BLK_DEV_SR) [Y/n/m/?] y
^[[31;01m*^[[0m Enable vendor-specific extensions (for SCSI CDROM) (BLK_DEV_SR_VENDOR) [Y/n/?] y
^[[31;01m*^[[0mSCSI generic support (CHR_DEV_SG) [Y/n/m/?] y
^[[31;01m*^[[0mSCSI media changer support (CHR_DEV_SCH) [N/m/y/?] n
^[[31;01m*^[[0mVerbose SCSI ^[[1m^[[Kerror ^[[m^[[Kreporting (kernel size += 36K) (SCSI_CONSTANTS) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mOSD-Initiator library (SCSI_OSD_INITIATOR) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers (libata)
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (libata) (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Enable WiMAX (Networking options) to see the WiMAX drivers
^[[31;01m*^[[0m *
^[[31;01m*^[[0m VMware VMXNET3 ethernet driver (VMXNET3) [N/m/y/?] n
^[[31;01m*^[[0m FUJITSU Extended Socket Network Device driver (FUJITSU_ES) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Simulated networking device (NETDEVSIM) [N/m/y/?] (NEW)
^[[31;01m*^[[0m ^[[1m^[[KFail^[[m^[[Kover driver (NET_^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS online metadata check support (XFS_ONLINE_SCRUB) [N/y/?] (NEW)
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mEnable tracing for RCU (RCU_TRACE) [N/y/?] n
^[[31;01m*^[[0mProvide debugging asserts for adding NO_HZ support to an arch (RCU_EQS_DEBUG) [N/y/?] (NEW)
^[[31;01m*^[[0mForce round-robin CPU selection for unbound work items (DEBUG_WQ_FORCE_RR_CPU) [N/y/?] (NEW)
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mEnable CPU hotplug state control (CPU_HOTPLUG_STATE_CONTROL) [N/y/?] (NEW)
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m UPD include/generated/timeconst.h
^[[31;01m*^[[0m UPD include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m UPD include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m HOSTCC scripts/genksyms/lex.lex.o
^[[31;01m*^[[0m HOSTCC scripts/conmakehash
^[[31;01m*^[[0m HOSTCC scripts/mod/sumversion.o
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m HOSTCC scripts/mod/file2alias.o
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/time/time.o
^[[31;01m*^[[0m CC mm/readahead.o
^[[31;01m*^[[0m AR kernel/irq/built-in.a
^[[31;01m*^[[0m CC kernel/fork.o
^[[31;01m*^[[0m CC kernel/sched/cputime.o
^[[31;01m*^[[0mkernel/fork.c:723:13: ^[[1m^[[Kwarning^[[m^[[K: 'task_struct_whitelist' defined but not used [-Wunused-function]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC net/core/datagram.o
^[[31;01m*^[[0m CC fs/fat/inode.o
^[[31;01m*^[[0m CC drivers/acpi/acpica/utexcep.o
^[[31;01m*^[[0mduring RTL pass: mach
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c: In function 'LZ4_decompress_fast':
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c:358:1: internal compiler ^[[1m^[[Kerror:^[[m^[[K in sel_target_adjust_priority, at sel-sched.c:3334
^[[31;01m*^[[0m 358 | }
^[[31;01m*^[[0m | ^
^[[31;01m*^[[0mPlease submit a full bug report,
^[[31;01m*^[[0mwith preprocessed source if appropriate.
^[[31;01m*^[[0mSee <https://bugs.gentoo.org/> for instructions.
^[[31;01m*^[[0mmake[2]: *** [scripts/Makefile.build:304: lib/lz4/lz4_decompress.o] ^[[1m^[[KError ^[[m^[[K1
^[[31;01m*^[[0mmake[1]: *** [scripts/Makefile.build:544: lib/lz4] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0mmake: *** [Makefile:1052: lib] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./include/linux/wait.h:7,
^[[31;01m*^[[0m from ./include/linux/wait_bit.h:8,
^[[31;01m*^[[0m from ./include/linux/fs.h:6,
^[[31;01m*^[[0m from fs/ocfs2/file.c:27:
^[[31;01m*^[[0mfs/ocfs2/file.c: In function 'ocfs2_file_write_iter':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./arch/ia64/include/asm/intrinsics.h:11,
^[[31;01m*^[[0m from ./arch/ia64/include/asm/bitops.h:19,
^[[31;01m*^[[0m from ./include/linux/bitops.h:19,
^[[31;01m*^[[0m from drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:11:
^[[31;01m*^[[0mdrivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function 'ixgbevf_xdp_setup':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191208T031010Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191208T031010Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191208T031010Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191208T031010Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
08 Dec 2019 05:59:16 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
08 Dec 2019 05:59:16 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
08 Dec 2019 05:59:16 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
08 Dec 2019 05:59:16 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
4454.06user 213.93system 29:49.04elapsed 260%CPU (0avgtext+0avgdata 232048maxresident)k
0inputs+0outputs (0major+19657216minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191208T031010Z.A7LsoM/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2024-02-17 18:06 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2024-02-17 18:06 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20240217T123343Z.Zc08aO/specs/installcd-stage2-minimal.spec
17 Feb 2024 17:23:28 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
17 Feb 2024 17:23:28 UTC: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
17 Feb 2024 17:23:28 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20240217T123343Z.Zc08aO/specs/installcd-stage2-minimal.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20240217T123343Z.Zc08aO/specs/installcd-stage2-minimal.spec
17 Feb 2024 17:23:28 UTC: NOTICE : Using target: livecd-stage2
NOTICE:catalyst:Using target: livecd-stage2
17 Feb 2024 17:23:28 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
NOTICE:catalyst:Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
17 Feb 2024 17:23:28 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20240217T123343Z/
NOTICE:catalyst:Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20240217T123343Z/
17 Feb 2024 17:23:28 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
17 Feb 2024 17:23:28 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20240217T123343Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20240217T123343Z
17 Feb 2024 17:23:28 UTC: NOTICE : --- Running action sequence: unpack
NOTICE:catalyst:--- Running action sequence: unpack
17 Feb 2024 17:23:28 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
NOTICE:catalyst:Resume: Target chroot is invalid, cleaning up...
17 Feb 2024 17:23:28 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
17 Feb 2024 17:23:28 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20240217T123343Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20240217T123343Z
17 Feb 2024 17:23:28 UTC: NOTICE : Clearing the chroot path ...
NOTICE:catalyst:Clearing the chroot path ...
17 Feb 2024 17:23:28 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20240217T123343Z/
NOTICE:catalyst:Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20240217T123343Z/
17 Feb 2024 17:23:28 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20240217T123343Z (this may take some time) ..
NOTICE:catalyst:to /home/catalyst/tmp/default/livecd-stage2-ia64-20240217T123343Z (this may take some time) ..
17 Feb 2024 17:23:52 UTC: NOTICE : --- Running action sequence: config_profile_link
NOTICE:catalyst:--- Running action sequence: config_profile_link
17 Feb 2024 17:23:52 UTC: NOTICE : --- Running action sequence: setup_confdir
NOTICE:catalyst:--- Running action sequence: setup_confdir
17 Feb 2024 17:23:52 UTC: NOTICE : --- Running action sequence: process_repos
NOTICE:catalyst:--- Running action sequence: process_repos
17 Feb 2024 17:23:52 UTC: NOTICE : --- Running action sequence: bind
NOTICE:catalyst:--- Running action sequence: bind
17 Feb 2024 17:23:52 UTC: NOTICE : --- Running action sequence: chroot_setup
NOTICE:catalyst:--- Running action sequence: chroot_setup
17 Feb 2024 17:23:52 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
17 Feb 2024 17:23:52 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
17 Feb 2024 17:23:52 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
17 Feb 2024 17:23:52 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20240217T123343Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20240217T123343Z/etc/portage/make.conf
17 Feb 2024 17:23:52 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
17 Feb 2024 17:23:52 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
17 Feb 2024 17:23:52 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
17 Feb 2024 17:23:52 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20240217T123343Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot sys-kernel/genkernel
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-kernel/linux-firmware-20240115-r3
>>> Emerging (1 of 4) sys-kernel/linux-firmware-20240115-r3::gentoo
>>> Emerging binary (2 of 4) app-arch/cpio-2.15::gentoo
>>> Installing (2 of 4) app-arch/cpio-2.15::gentoo
>>> Completed (2 of 4) app-arch/cpio-2.15::gentoo
>>> Emerging binary (3 of 4) app-alternatives/cpio-0::gentoo
>>> Installing (3 of 4) app-alternatives/cpio-0::gentoo
>>> Completed (3 of 4) app-alternatives/cpio-0::gentoo
>>> Installing (1 of 4) sys-kernel/linux-firmware-20240115-r3::gentoo
>>> Completed (1 of 4) sys-kernel/linux-firmware-20240115-r3::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.3.10::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.3.10::gentoo
>>> Completed (4 of 4) sys-kernel/genkernel-4.3.10::gentoo
* Messages for package app-alternatives/cpio-0:
* Log file: /var/log/portage/app-alternatives:cpio-0:20240217-172559.log
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /bin/cpio
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'app-alternatives/cpio-0' merged despite file collisions. If
* necessary, refer to your elog messages for the whole content of the
* above message.
* Messages for package sys-kernel/linux-firmware-20240115-r3:
* Log file: /var/log/portage/sys-kernel:linux-firmware-20240115-r3:20240217-172403.log
* Building using saved configfile "/etc/portage/savedconfig/sys-kernel/linux-firmware"
* Your configuration for sys-kernel/linux-firmware-20240115-r3 has been saved in
* "/etc/portage/savedconfig/sys-kernel/linux-firmware-20240115-r3" for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-4.3.10:
* Log file: /var/log/portage/sys-kernel:genkernel-4.3.10:20240217-172705.log
* Found the following problematic permissions:
*
* drwxrwxrwt /run
*
* Expected:
*
* drwxr-xr-x /run
*
* This is known to be causing problems for any UDEV-enabled service.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20240217T123343Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --update gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-6.6.17::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-6.6.17::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
>>> Completed (1 of 1) sys-kernel/gentoo-sources-6.6.17::gentoo
* Messages for package sys-kernel/gentoo-sources-6.6.17:
* Log file: /var/log/portage/sys-kernel:gentoo-sources-6.6.17:20240217-172735.log
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
* Install additional packages for optional runtime features:
* sys-kernel/installkernel for versioned kernel image installation and optionally automating tasks such as generating an initramfs or unified kernel image
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.3.10^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20240217T123343Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20240217T123343Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20240217T123343Z.tar.bz2 all --no-lvm --no-dmraid --no-luks --kerncache=/tmp/kerncache/gentoo-kerncache-20240217T123343Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20240217T123343Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m6.6.17-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m6.6.17-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 6.6.17-gentoo-ia64 ...
^[[32;01m*^[[0m >> Compiling 6.6.17-gentoo-ia64 modules ...
^[[32;01m*^[[0m >> Installing 6.6.17-gentoo-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Compiling out-of-tree module(s) ...
!!! CONFIG_PROTECT is empty
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-6.6.17-gentoo-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending util-linux cpio data ...
/usr/share/genkernel/gen_worker.sh: line 68: 524356 Aborted ./configure --prefix=/usr --build=ia64-unknown-linux-gnu --host=ia64-unknown-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-dependency-tracking --disable-silent-rules --docdir=/usr/share/doc/util-linux-2.38.1 --htmldir=/usr/share/doc/util-linux-2.38.1/html --with-sysroot='/var/tmp/genkernel/gk_S1bIKOpb/util-linux/buildroot/usr:/' --disable-libtool-lock --enable-libmount --disable-libsmartcols --disable-libfdisk --enable-libuuid --without-ncursesw --without-ncurses --disable-widechar --without-python --disable-pylibmount --enable-switch_root --enable-static-programs=blkid >> "/var/log/genkernel.log" 2>&1
^[[31;01m*^[[0m ERROR: Command './configure --prefix=/usr --build=ia64-unknown-linux-gnu --host=ia64-unknown-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-dependency-tracking --disable-silent-rules --docdir=/usr/share/doc/util-linux-2.38.1 --htmldir=/usr/share/doc/util-linux-2.38.1/html --with-sysroot='/var/tmp/genkernel/gk_S1bIKOpb/util-linux/buildroot/usr:/' --disable-libtool-lock --enable-libmount --disable-libsmartcols --disable-libfdisk --enable-libuuid --without-ncursesw --without-ncurses --disable-widechar --without-python --disable-pylibmount --enable-switch_root --enable-static-programs=blkid' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_util-linux(): populate_binpkg(): gkbuild(): Failed to create binpkg of util-linux-2.38.1!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
17 Feb 2024 18:06:10 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
17 Feb 2024 18:06:10 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.11/site-packages/catalyst/base/stagebase.py", line 1608, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.11/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname], env=self.env)
File "/usr/lib/python3.11/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.11/site-packages/catalyst/base/stagebase.py", line 1608, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.11/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname], env=self.env)
File "/usr/lib/python3.11/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
Command exited with non-zero status 2
6495.45user 382.46system 42:43.55elapsed 268%CPU (0avgtext+0avgdata 321152maxresident)k
0inputs+0outputs (469major+24945367minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20240217T123343Z.Zc08aO/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2024-01-26 14:08 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2024-01-26 14:08 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20240126T021821Z.5E5zmG/specs/installcd-stage2-minimal.spec
26 Jan 2024 13:16:09 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
26 Jan 2024 13:16:09 UTC: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
26 Jan 2024 13:16:09 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20240126T021821Z.5E5zmG/specs/installcd-stage2-minimal.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20240126T021821Z.5E5zmG/specs/installcd-stage2-minimal.spec
26 Jan 2024 13:16:09 UTC: NOTICE : Using target: livecd-stage2
NOTICE:catalyst:Using target: livecd-stage2
26 Jan 2024 13:16:09 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
NOTICE:catalyst:Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
26 Jan 2024 13:16:09 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20240126T021821Z/
NOTICE:catalyst:Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20240126T021821Z/
26 Jan 2024 13:16:09 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
26 Jan 2024 13:16:09 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20240126T021821Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20240126T021821Z
26 Jan 2024 13:16:09 UTC: NOTICE : --- Running action sequence: unpack
NOTICE:catalyst:--- Running action sequence: unpack
26 Jan 2024 13:16:09 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
NOTICE:catalyst:Resume: Target chroot is invalid, cleaning up...
26 Jan 2024 13:16:09 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
26 Jan 2024 13:16:09 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20240126T021821Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20240126T021821Z
26 Jan 2024 13:16:09 UTC: NOTICE : Clearing the chroot path ...
NOTICE:catalyst:Clearing the chroot path ...
26 Jan 2024 13:16:09 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20240126T021821Z/
NOTICE:catalyst:Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20240126T021821Z/
26 Jan 2024 13:16:09 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20240126T021821Z (this may take some time) ..
NOTICE:catalyst:to /home/catalyst/tmp/default/livecd-stage2-ia64-20240126T021821Z (this may take some time) ..
26 Jan 2024 13:16:33 UTC: NOTICE : --- Running action sequence: config_profile_link
NOTICE:catalyst:--- Running action sequence: config_profile_link
26 Jan 2024 13:16:34 UTC: NOTICE : --- Running action sequence: setup_confdir
NOTICE:catalyst:--- Running action sequence: setup_confdir
26 Jan 2024 13:16:34 UTC: NOTICE : --- Running action sequence: process_repos
NOTICE:catalyst:--- Running action sequence: process_repos
26 Jan 2024 13:16:34 UTC: NOTICE : --- Running action sequence: bind
NOTICE:catalyst:--- Running action sequence: bind
26 Jan 2024 13:16:34 UTC: NOTICE : --- Running action sequence: chroot_setup
NOTICE:catalyst:--- Running action sequence: chroot_setup
26 Jan 2024 13:16:34 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
26 Jan 2024 13:16:34 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
26 Jan 2024 13:16:34 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
26 Jan 2024 13:16:34 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20240126T021821Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20240126T021821Z/etc/portage/make.conf
26 Jan 2024 13:16:34 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
26 Jan 2024 13:16:34 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
26 Jan 2024 13:16:34 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
26 Jan 2024 13:16:34 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20240126T021821Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot sys-kernel/genkernel
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-kernel/linux-firmware-20240115
>>> Emerging (1 of 4) sys-kernel/linux-firmware-20240115::gentoo
>>> Emerging (2 of 4) app-arch/cpio-2.15::gentoo
>>> Installing (2 of 4) app-arch/cpio-2.15::gentoo
>>> Installing (1 of 4) sys-kernel/linux-firmware-20240115::gentoo
>>> Completed (2 of 4) app-arch/cpio-2.15::gentoo
>>> Emerging binary (3 of 4) app-alternatives/cpio-0::gentoo
>>> Installing (3 of 4) app-alternatives/cpio-0::gentoo
>>> Completed (1 of 4) sys-kernel/linux-firmware-20240115::gentoo
>>> Completed (3 of 4) app-alternatives/cpio-0::gentoo
>>> Emerging (4 of 4) sys-kernel/genkernel-4.3.10::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.3.10::gentoo
>>> Completed (4 of 4) sys-kernel/genkernel-4.3.10::gentoo
* Messages for package sys-kernel/linux-firmware-20240115:
* Log file: /var/log/portage/sys-kernel:linux-firmware-20240115:20240126-131659.log
* Building using saved configfile "/etc/portage/savedconfig/sys-kernel/linux-firmware"
* Your configuration for sys-kernel/linux-firmware-20240115 has been saved in
* "/etc/portage/savedconfig/sys-kernel/linux-firmware-20240115" for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package app-alternatives/cpio-0:
* Log file: /var/log/portage/app-alternatives:cpio-0:20240126-132107.log
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /bin/cpio
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'app-alternatives/cpio-0' merged despite file collisions. If
* necessary, refer to your elog messages for the whole content of the
* above message.
* Messages for package sys-kernel/genkernel-4.3.10:
* Log file: /var/log/portage/sys-kernel:genkernel-4.3.10:20240126-132217.log
* Found the following problematic permissions:
*
* drwxrwxrwt /run
*
* Expected:
*
* drwxr-xr-x /run
*
* This is known to be causing problems for any UDEV-enabled service.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20240126T021821Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --update gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-6.6.14::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-6.6.14::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
>>> Completed (1 of 1) sys-kernel/gentoo-sources-6.6.14::gentoo
* Messages for package sys-kernel/gentoo-sources-6.6.14:
* Log file: /var/log/portage/sys-kernel:gentoo-sources-6.6.14:20240126-132312.log
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.3.10^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20240126T021821Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20240126T021821Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20240126T021821Z.tar.bz2 all --no-lvm --no-dmraid --no-luks --kerncache=/tmp/kerncache/gentoo-kerncache-20240126T021821Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20240126T021821Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m6.6.14-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m6.6.14-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 6.6.14-gentoo-ia64 ...
^[[32;01m*^[[0m >> Compiling 6.6.14-gentoo-ia64 modules ...
^[[32;01m*^[[0m >> Installing 6.6.14-gentoo-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Compiling out-of-tree module(s) ...
!!! CONFIG_PROTECT is empty
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-6.6.14-gentoo-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending util-linux cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
^[[32;01m*^[[0m >> Appending auxiliary cpio data ...
^[[32;01m*^[[0m >> Appending busybox cpio data ...
/usr/share/genkernel/gen_worker.sh: line 68: 1370833 Segmentation fault ./configure --prefix=/usr --build=ia64-unknown-linux-gnu --host=ia64-unknown-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-dependency-tracking --disable-silent-rules --docdir=/usr/share/doc/libxcrypt-4.4.36 --htmldir=/usr/share/doc/libxcrypt-4.4.36/html --with-sysroot='/var/tmp/genkernel/gk_xzbqhxt8/libxcrypt/buildroot/usr:/' --enable-shared --enable-static >> "/var/log/genkernel.log" 2>&1
^[[31;01m*^[[0m ERROR: Command './configure --prefix=/usr --build=ia64-unknown-linux-gnu --host=ia64-unknown-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-dependency-tracking --disable-silent-rules --docdir=/usr/share/doc/libxcrypt-4.4.36 --htmldir=/usr/share/doc/libxcrypt-4.4.36/html --with-sysroot='/var/tmp/genkernel/gk_xzbqhxt8/libxcrypt/buildroot/usr:/' --enable-shared --enable-static' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_busybox(): populate_binpkg(): populate_binpkg(): gkbuild(): Failed to create binpkg of libxcrypt-4.4.36!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
26 Jan 2024 14:08:43 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
26 Jan 2024 14:08:43 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.11/site-packages/catalyst/base/stagebase.py", line 1601, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.11/site-packages/catalyst/base/stagebase.py", line 1620, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.11/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.11/site-packages/catalyst/base/stagebase.py", line 1601, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.11/site-packages/catalyst/base/stagebase.py", line 1620, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.11/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
Command exited with non-zero status 2
7291.14user 521.27system 52:34.25elapsed 247%CPU (0avgtext+0avgdata 316160maxresident)k
0inputs+0outputs (775major+39354210minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20240126T021821Z.5E5zmG/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2023-10-09 9:23 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2023-10-09 9:23 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20231009T030203Z.3Cv3kr/specs/installcd-stage2-minimal.spec
09 Oct 2023 08:22:38 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
09 Oct 2023 08:22:38 UTC: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
09 Oct 2023 08:22:39 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20231009T030203Z.3Cv3kr/specs/installcd-stage2-minimal.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20231009T030203Z.3Cv3kr/specs/installcd-stage2-minimal.spec
09 Oct 2023 08:22:39 UTC: NOTICE : Using target: livecd-stage2
NOTICE:catalyst:Using target: livecd-stage2
09 Oct 2023 08:22:39 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
NOTICE:catalyst:Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
09 Oct 2023 08:22:39 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20231009T030203Z/
NOTICE:catalyst:Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20231009T030203Z/
09 Oct 2023 08:22:39 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
09 Oct 2023 08:22:39 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20231009T030203Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20231009T030203Z
09 Oct 2023 08:22:39 UTC: NOTICE : --- Running action sequence: unpack
NOTICE:catalyst:--- Running action sequence: unpack
09 Oct 2023 08:22:39 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
NOTICE:catalyst:Resume: Target chroot is invalid, cleaning up...
09 Oct 2023 08:22:39 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
09 Oct 2023 08:22:39 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20231009T030203Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20231009T030203Z
09 Oct 2023 08:22:39 UTC: NOTICE : Clearing the chroot path ...
NOTICE:catalyst:Clearing the chroot path ...
09 Oct 2023 08:22:39 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20231009T030203Z/
NOTICE:catalyst:Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20231009T030203Z/
09 Oct 2023 08:22:39 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20231009T030203Z (this may take some time) ..
NOTICE:catalyst:to /home/catalyst/tmp/default/livecd-stage2-ia64-20231009T030203Z (this may take some time) ..
09 Oct 2023 08:24:56 UTC: NOTICE : --- Running action sequence: config_profile_link
NOTICE:catalyst:--- Running action sequence: config_profile_link
09 Oct 2023 08:24:56 UTC: NOTICE : --- Running action sequence: setup_confdir
NOTICE:catalyst:--- Running action sequence: setup_confdir
09 Oct 2023 08:24:56 UTC: NOTICE : --- Running action sequence: process_repos
NOTICE:catalyst:--- Running action sequence: process_repos
09 Oct 2023 08:24:56 UTC: NOTICE : --- Running action sequence: bind
NOTICE:catalyst:--- Running action sequence: bind
09 Oct 2023 08:24:56 UTC: NOTICE : --- Running action sequence: chroot_setup
NOTICE:catalyst:--- Running action sequence: chroot_setup
09 Oct 2023 08:24:56 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
09 Oct 2023 08:24:56 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
09 Oct 2023 08:24:56 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
09 Oct 2023 08:24:56 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20231009T030203Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20231009T030203Z/etc/portage/make.conf
09 Oct 2023 08:24:56 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
09 Oct 2023 08:24:56 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
09 Oct 2023 08:24:56 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
09 Oct 2023 08:24:56 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20231009T030203Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot sys-kernel/genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20230919
>>> Emerging binary (1 of 4) sys-kernel/linux-firmware-20230919::gentoo
>>> Emerging binary (2 of 4) app-arch/cpio-2.14::gentoo
>>> Installing (2 of 4) app-arch/cpio-2.14::gentoo
>>> Installing (1 of 4) sys-kernel/linux-firmware-20230919::gentoo
>>> Completed (2 of 4) app-arch/cpio-2.14::gentoo
>>> Emerging binary (3 of 4) app-alternatives/cpio-0::gentoo
>>> Installing (3 of 4) app-alternatives/cpio-0::gentoo
>>> Completed (3 of 4) app-alternatives/cpio-0::gentoo
>>> Completed (1 of 4) sys-kernel/linux-firmware-20230919::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.3.6::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.3.6::gentoo
>>> Completed (4 of 4) sys-kernel/genkernel-4.3.6::gentoo
* Messages for package app-alternatives/cpio-0:
* Log file: /var/log/portage/app-alternatives:cpio-0:20231009-082637.log
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /bin/cpio
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'app-alternatives/cpio-0' merged despite file collisions. If
* necessary, refer to your elog messages for the whole content of the
* above message.
* Messages for package sys-kernel/linux-firmware-20230919:
* Log file: /var/log/portage/sys-kernel:linux-firmware-20230919:20231009-082514.log
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-4.3.6:
* Log file: /var/log/portage/sys-kernel:genkernel-4.3.6:20231009-082703.log
* Found the following problematic permissions:
*
* drwxrwxrwt /run
*
* Expected:
*
* drwxr-xr-x /run
*
* This is known to be causing problems for any UDEV-enabled service.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20231009T030203Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --update gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-6.5.6::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-6.5.6::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
>>> Completed (1 of 1) sys-kernel/gentoo-sources-6.5.6::gentoo
* Messages for package sys-kernel/gentoo-sources-6.5.6:
* Log file: /var/log/portage/sys-kernel:gentoo-sources-6.5.6:20231009-082734.log
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.3.6^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20231009T030203Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20231009T030203Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20231009T030203Z.tar.bz2 all --no-lvm --no-dmraid --no-luks --kerncache=/tmp/kerncache/gentoo-kerncache-20231009T030203Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20231009T030203Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m6.5.6-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m6.5.6-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 6.5.6-gentoo-ia64 ...
^[[32;01m*^[[0m >> Compiling 6.5.6-gentoo-ia64 modules ...
^[[32;01m*^[[0m >> Installing 6.5.6-gentoo-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Compiling out-of-tree module(s) ...
!!! CONFIG_PROTECT is empty
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-6.5.6-gentoo-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending util-linux cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
^[[32;01m*^[[0m >> Appending auxiliary cpio data ...
^[[32;01m*^[[0m >> Appending busybox cpio data ...
^[[32;01m*^[[0m >> Appending modprobed cpio data ...
^[[32;01m*^[[0m >> Appending modules cpio data ...
malloc(): unaligned tcache chunk detected
/tmp/kmerge.sh: line 7: 920121 Segmentation fault genkernel "${GK_ARGS[@]}"
09 Oct 2023 09:23:34 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
09 Oct 2023 09:23:34 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.11/site-packages/catalyst/base/stagebase.py", line 1601, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.11/site-packages/catalyst/base/stagebase.py", line 1620, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.11/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.11/site-packages/catalyst/base/stagebase.py", line 1601, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.11/site-packages/catalyst/base/stagebase.py", line 1620, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.11/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
Command exited with non-zero status 2
7459.96user 426.91system 1:00:56elapsed 215%CPU (0avgtext+0avgdata 267136maxresident)k
0inputs+0outputs (3168major+34837348minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20231009T030203Z.3Cv3kr/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2023-07-05 8:11 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2023-07-05 8:11 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20230705T030204Z.crpFqa/specs/installcd-stage2-minimal.spec
05 Jul 2023 07:11:18 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
05 Jul 2023 07:11:18 UTC: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
05 Jul 2023 07:11:18 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20230705T030204Z.crpFqa/specs/installcd-stage2-minimal.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20230705T030204Z.crpFqa/specs/installcd-stage2-minimal.spec
05 Jul 2023 07:11:18 UTC: NOTICE : Using target: livecd-stage2
NOTICE:catalyst:Using target: livecd-stage2
05 Jul 2023 07:11:18 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
NOTICE:catalyst:Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
05 Jul 2023 07:11:18 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20230705T030204Z/
NOTICE:catalyst:Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20230705T030204Z/
05 Jul 2023 07:11:18 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
05 Jul 2023 07:11:18 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20230705T030204Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20230705T030204Z
05 Jul 2023 07:11:18 UTC: NOTICE : --- Running action sequence: unpack
NOTICE:catalyst:--- Running action sequence: unpack
05 Jul 2023 07:11:18 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
NOTICE:catalyst:Resume: Target chroot is invalid, cleaning up...
05 Jul 2023 07:11:18 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
05 Jul 2023 07:11:18 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20230705T030204Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20230705T030204Z
05 Jul 2023 07:11:18 UTC: NOTICE : Clearing the chroot path ...
NOTICE:catalyst:Clearing the chroot path ...
05 Jul 2023 07:11:18 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20230705T030204Z/
NOTICE:catalyst:Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20230705T030204Z/
05 Jul 2023 07:11:18 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20230705T030204Z (this may take some time) ..
NOTICE:catalyst:to /home/catalyst/tmp/default/livecd-stage2-ia64-20230705T030204Z (this may take some time) ..
05 Jul 2023 07:13:06 UTC: NOTICE : --- Running action sequence: config_profile_link
NOTICE:catalyst:--- Running action sequence: config_profile_link
05 Jul 2023 07:13:06 UTC: NOTICE : --- Running action sequence: setup_confdir
NOTICE:catalyst:--- Running action sequence: setup_confdir
05 Jul 2023 07:13:06 UTC: NOTICE : --- Running action sequence: process_repos
NOTICE:catalyst:--- Running action sequence: process_repos
05 Jul 2023 07:13:06 UTC: NOTICE : --- Running action sequence: bind
NOTICE:catalyst:--- Running action sequence: bind
05 Jul 2023 07:13:06 UTC: NOTICE : --- Running action sequence: chroot_setup
NOTICE:catalyst:--- Running action sequence: chroot_setup
05 Jul 2023 07:13:06 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
05 Jul 2023 07:13:06 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
05 Jul 2023 07:13:06 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
05 Jul 2023 07:13:06 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20230705T030204Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20230705T030204Z/etc/portage/make.conf
05 Jul 2023 07:13:06 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
05 Jul 2023 07:13:06 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
05 Jul 2023 07:13:06 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
05 Jul 2023 07:13:06 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20230705T030204Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot sys-kernel/genkernel
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-kernel/linux-firmware-20230625
>>> Emerging binary (1 of 4) sys-kernel/linux-firmware-20230625::gentoo
>>> Emerging binary (2 of 4) app-arch/cpio-2.14::gentoo
>>> Installing (2 of 4) app-arch/cpio-2.14::gentoo
>>> Installing (1 of 4) sys-kernel/linux-firmware-20230625::gentoo
>>> Completed (2 of 4) app-arch/cpio-2.14::gentoo
>>> Emerging binary (3 of 4) app-alternatives/cpio-0::gentoo
>>> Completed (1 of 4) sys-kernel/linux-firmware-20230625::gentoo
>>> Installing (3 of 4) app-alternatives/cpio-0::gentoo
>>> Completed (3 of 4) app-alternatives/cpio-0::gentoo
>>> Emerging (4 of 4) sys-kernel/genkernel-4.3.3::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.3.3::gentoo
>>> Completed (4 of 4) sys-kernel/genkernel-4.3.3::gentoo
* Messages for package sys-kernel/linux-firmware-20230625:
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package app-alternatives/cpio-0:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /bin/cpio
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'app-alternatives/cpio-0' merged despite file collisions. If
* necessary, refer to your elog messages for the whole content of the
* above message.
* Messages for package sys-kernel/genkernel-4.3.3:
* Found the following problematic permissions:
*
* drwxrwxrwt /run
*
* Expected:
*
* drwxr-xr-x /run
*
* This is known to be causing problems for any UDEV-enabled service.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20230705T030204Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --update gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-6.4.1-r1::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-6.4.1-r1::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
>>> Completed (1 of 1) sys-kernel/gentoo-sources-6.4.1-r1::gentoo
* Messages for package sys-kernel/gentoo-sources-6.4.1-r1:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.3.3^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20230705T030204Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20230705T030204Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20230705T030204Z.tar.bz2 all --no-lvm --no-dmraid --no-luks --kerncache=/tmp/kerncache/gentoo-kerncache-20230705T030204Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20230705T030204Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m6.4.1-gentoo-r1^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m6.4.1-gentoo-r1-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 6.4.1-gentoo-r1-ia64 ...
^[[32;01m*^[[0m >> Compiling 6.4.1-gentoo-r1-ia64 modules ...
^[[32;01m*^[[0m >> Installing 6.4.1-gentoo-r1-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-6.4.1-gentoo-r1-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending util-linux cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
^[[32;01m*^[[0m >> Appending auxiliary cpio data ...
^[[32;01m*^[[0m >> Appending busybox cpio data ...
^[[31;01m*^[[0m ERROR: Command './configure --prefix=/usr --build=ia64-unknown-linux-gnu --host=ia64-unknown-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-dependency-tracking --disable-silent-rules --docdir=/usr/share/doc/libxcrypt-4.4.26 --htmldir=/usr/share/doc/libxcrypt-4.4.26/html --with-sysroot='/var/tmp/genkernel/gk_gF6M2Lmy/libxcrypt/buildroot/usr:/' --enable-shared --enable-static' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_busybox(): populate_binpkg(): populate_binpkg(): gkbuild(): Failed to create binpkg of libxcrypt-4.4.26!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
05 Jul 2023 08:11:18 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
05 Jul 2023 08:11:18 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1570, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1589, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1570, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1589, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
Command exited with non-zero status 2
8051.00user 475.05system 1:00:01elapsed 236%CPU (0avgtext+0avgdata 323632maxresident)k
0inputs+0outputs (2489major+36704275minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20230705T030204Z.crpFqa/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2022-07-20 9:04 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2022-07-20 9:04 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20220720T030149Z.RjSmJ9/specs/installcd-stage2-minimal.spec
20 Jul 2022 08:23:07 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
20 Jul 2022 08:23:07 UTC: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
20 Jul 2022 08:23:07 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20220720T030149Z.RjSmJ9/specs/installcd-stage2-minimal.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20220720T030149Z.RjSmJ9/specs/installcd-stage2-minimal.spec
20 Jul 2022 08:23:07 UTC: NOTICE : Using target: livecd-stage2
NOTICE:catalyst:Using target: livecd-stage2
20 Jul 2022 08:23:07 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
NOTICE:catalyst:Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
20 Jul 2022 08:23:07 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220720T030149Z/
NOTICE:catalyst:Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220720T030149Z/
20 Jul 2022 08:23:07 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
20 Jul 2022 08:23:07 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220720T030149Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220720T030149Z
20 Jul 2022 08:23:07 UTC: NOTICE : --- Running action sequence: unpack
NOTICE:catalyst:--- Running action sequence: unpack
20 Jul 2022 08:23:07 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
NOTICE:catalyst:Resume: Target chroot is invalid, cleaning up...
20 Jul 2022 08:23:07 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
20 Jul 2022 08:23:07 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220720T030149Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220720T030149Z
20 Jul 2022 08:23:07 UTC: NOTICE : Clearing the chroot path ...
NOTICE:catalyst:Clearing the chroot path ...
20 Jul 2022 08:23:07 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220720T030149Z/
NOTICE:catalyst:Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220720T030149Z/
20 Jul 2022 08:23:07 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20220720T030149Z (this may take some time) ..
NOTICE:catalyst:to /home/catalyst/tmp/default/livecd-stage2-ia64-20220720T030149Z (this may take some time) ..
20 Jul 2022 08:23:29 UTC: NOTICE : --- Running action sequence: config_profile_link
NOTICE:catalyst:--- Running action sequence: config_profile_link
20 Jul 2022 08:23:29 UTC: NOTICE : --- Running action sequence: setup_confdir
NOTICE:catalyst:--- Running action sequence: setup_confdir
20 Jul 2022 08:23:29 UTC: NOTICE : --- Running action sequence: process_repos
NOTICE:catalyst:--- Running action sequence: process_repos
20 Jul 2022 08:23:29 UTC: NOTICE : --- Running action sequence: bind
NOTICE:catalyst:--- Running action sequence: bind
20 Jul 2022 08:23:29 UTC: NOTICE : --- Running action sequence: chroot_setup
NOTICE:catalyst:--- Running action sequence: chroot_setup
20 Jul 2022 08:23:29 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
20 Jul 2022 08:23:29 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
20 Jul 2022 08:23:29 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
20 Jul 2022 08:23:29 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220720T030149Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220720T030149Z/etc/portage/make.conf
20 Jul 2022 08:23:29 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
20 Jul 2022 08:23:29 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
20 Jul 2022 08:23:29 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
20 Jul 2022 08:23:29 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220720T030149Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot sys-kernel/genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20220708
>>> Emerging binary (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 3) sys-kernel/linux-firmware-20220708::gentoo
>>> Installing (2 of 3) sys-kernel/linux-firmware-20220708::gentoo
>>> Emerging binary (3 of 3) sys-kernel/genkernel-4.2.6-r4::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-4.2.6-r4::gentoo
* Messages for package sys-kernel/linux-firmware-20220708:
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-4.2.6-r4:
* Found the following problematic permissions:
*
* drwxrwxrwt /run
*
* Expected:
*
* drwxr-xr-x /run
*
* This is known to be causing problems for any UDEV-enabled service.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220720T030149Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --update gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging binary (1 of 2) sys-devel/bc-1.07.1-r4::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.07.1-r4::gentoo
>>> Emerging (2 of 2) sys-kernel/gentoo-sources-5.18.12::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-5.18.12::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.18.12:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.2.6^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20220720T030149Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20220720T030149Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20220720T030149Z.tar.bz2 all --no-lvm --no-dmraid --no-luks --kerncache=/tmp/kerncache/gentoo-kerncache-20220720T030149Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20220720T030149Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.18.12-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.18.12-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.18.12-gentoo-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.18.12-gentoo-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.18.12-gentoo-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.18.12-gentoo-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending util-linux cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
/usr/share/genkernel/gen_worker.sh: line 68: 540161 Segmentation fault ELT_LOGDIR='/var/tmp/genkernel/gk_PAXJv2f2/xz/temp' LD='ia64-unknown-linux-gnu-ld' eltpatch >> "/var/log/genkernel.log" 2>&1
^[[31;01m*^[[0m ERROR: Command 'ELT_LOGDIR='/var/tmp/genkernel/gk_PAXJv2f2/xz/temp' LD='ia64-unknown-linux-gnu-ld' eltpatch' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_eudev(): populate_binpkg(): populate_binpkg(): gkbuild(): Failed to create binpkg of xz-5.2.5!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
20 Jul 2022 09:04:39 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
20 Jul 2022 09:04:39 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
Command exited with non-zero status 2
6118.56user 297.49system 41:34.13elapsed 257%CPU (0avgtext+0avgdata 256352maxresident)k
0inputs+0outputs (882major+24823223minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20220720T030149Z.RjSmJ9/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2022-05-16 1:44 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2022-05-16 1:44 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20220515T214759Z.cTUOhW/specs/installcd-stage2-minimal.spec
16 May 2022 00:57:42 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
16 May 2022 00:57:42 UTC: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
16 May 2022 00:57:42 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20220515T214759Z.cTUOhW/specs/installcd-stage2-minimal.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20220515T214759Z.cTUOhW/specs/installcd-stage2-minimal.spec
16 May 2022 00:57:42 UTC: NOTICE : Using target: livecd-stage2
NOTICE:catalyst:Using target: livecd-stage2
16 May 2022 00:57:42 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
NOTICE:catalyst:Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
16 May 2022 00:57:42 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220515T214759Z/
NOTICE:catalyst:Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220515T214759Z/
16 May 2022 00:57:43 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
16 May 2022 00:57:43 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220515T214759Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220515T214759Z
16 May 2022 00:57:43 UTC: NOTICE : --- Running action sequence: unpack
NOTICE:catalyst:--- Running action sequence: unpack
16 May 2022 00:57:43 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
NOTICE:catalyst:Resume: Target chroot is invalid, cleaning up...
16 May 2022 00:57:43 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
16 May 2022 00:57:43 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220515T214759Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220515T214759Z
16 May 2022 00:57:43 UTC: NOTICE : Clearing the chroot path ...
NOTICE:catalyst:Clearing the chroot path ...
16 May 2022 00:57:43 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220515T214759Z/
NOTICE:catalyst:Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220515T214759Z/
16 May 2022 00:57:43 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20220515T214759Z (this may take some time) ..
NOTICE:catalyst:to /home/catalyst/tmp/default/livecd-stage2-ia64-20220515T214759Z (this may take some time) ..
16 May 2022 00:58:05 UTC: NOTICE : --- Running action sequence: config_profile_link
NOTICE:catalyst:--- Running action sequence: config_profile_link
16 May 2022 00:58:05 UTC: NOTICE : --- Running action sequence: setup_confdir
NOTICE:catalyst:--- Running action sequence: setup_confdir
16 May 2022 00:58:05 UTC: NOTICE : --- Running action sequence: process_repos
NOTICE:catalyst:--- Running action sequence: process_repos
16 May 2022 00:58:05 UTC: NOTICE : --- Running action sequence: bind
NOTICE:catalyst:--- Running action sequence: bind
16 May 2022 00:58:05 UTC: NOTICE : --- Running action sequence: chroot_setup
NOTICE:catalyst:--- Running action sequence: chroot_setup
16 May 2022 00:58:05 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
16 May 2022 00:58:05 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
16 May 2022 00:58:05 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
16 May 2022 00:58:05 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220515T214759Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220515T214759Z/etc/portage/make.conf
16 May 2022 00:58:05 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
16 May 2022 00:58:05 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
16 May 2022 00:58:05 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
16 May 2022 00:58:05 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220515T214759Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot sys-kernel/genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20220509
>>> Emerging binary (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 3) sys-kernel/linux-firmware-20220509::gentoo
>>> Installing (2 of 3) sys-kernel/linux-firmware-20220509::gentoo
>>> Emerging binary (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
* Messages for package sys-kernel/linux-firmware-20220509:
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-4.2.6-r2:
* Found the following problematic permissions:
*
* drwxrwxrwt /run
*
* Expected:
*
* drwxr-xr-x /run
*
* This is known to be causing problems for any UDEV-enabled service.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220515T214759Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --update gentoo-sources
>>> Emerging binary (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Emerging binary (2 of 2) sys-kernel/gentoo-sources-5.17.7::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-5.17.7::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.17.7:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.2.6^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20220515T214759Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20220515T214759Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20220515T214759Z.tar.bz2 all --no-lvm --no-dmraid --no-luks --kerncache=/tmp/kerncache/gentoo-kerncache-20220515T214759Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20220515T214759Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.17.7-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.17.7-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.17.7-gentoo-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.17.7-gentoo-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.17.7-gentoo-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.17.7-gentoo-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending util-linux cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
^[[32;01m*^[[0m >> Appending devicemanager cpio data ...
^[[31;01m*^[[0m ERROR: Command 'nice -n10 make -j4 -l4.0 V=1' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_devicemanager(): populate_binpkg(): gkbuild(): Failed to create binpkg of lvm-2.02.188!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
16 May 2022 01:44:50 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
16 May 2022 01:44:50 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
Command exited with non-zero status 2
7179.27user 323.54system 47:08.69elapsed 265%CPU (0avgtext+0avgdata 324624maxresident)k
0inputs+0outputs (838major+30754900minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20220515T214759Z.cTUOhW/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2022-05-15 21:59 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2022-05-15 21:59 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20220515T161807Z.ogppH0/specs/installcd-stage2-minimal.spec
15 May 2022 21:06:35 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
15 May 2022 21:06:35 UTC: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
15 May 2022 21:06:35 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20220515T161807Z.ogppH0/specs/installcd-stage2-minimal.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20220515T161807Z.ogppH0/specs/installcd-stage2-minimal.spec
15 May 2022 21:06:35 UTC: NOTICE : Using target: livecd-stage2
NOTICE:catalyst:Using target: livecd-stage2
15 May 2022 21:06:35 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
NOTICE:catalyst:Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
15 May 2022 21:06:35 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220515T161807Z/
NOTICE:catalyst:Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220515T161807Z/
15 May 2022 21:06:35 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
15 May 2022 21:06:35 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220515T161807Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220515T161807Z
15 May 2022 21:06:35 UTC: NOTICE : --- Running action sequence: unpack
NOTICE:catalyst:--- Running action sequence: unpack
15 May 2022 21:06:35 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
NOTICE:catalyst:Resume: Target chroot is invalid, cleaning up...
15 May 2022 21:06:35 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
15 May 2022 21:06:35 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220515T161807Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220515T161807Z
15 May 2022 21:06:35 UTC: NOTICE : Clearing the chroot path ...
NOTICE:catalyst:Clearing the chroot path ...
15 May 2022 21:06:35 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220515T161807Z/
NOTICE:catalyst:Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220515T161807Z/
15 May 2022 21:06:35 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20220515T161807Z (this may take some time) ..
NOTICE:catalyst:to /home/catalyst/tmp/default/livecd-stage2-ia64-20220515T161807Z (this may take some time) ..
15 May 2022 21:06:56 UTC: NOTICE : --- Running action sequence: config_profile_link
NOTICE:catalyst:--- Running action sequence: config_profile_link
15 May 2022 21:06:56 UTC: NOTICE : --- Running action sequence: setup_confdir
NOTICE:catalyst:--- Running action sequence: setup_confdir
15 May 2022 21:06:56 UTC: NOTICE : --- Running action sequence: process_repos
NOTICE:catalyst:--- Running action sequence: process_repos
15 May 2022 21:06:56 UTC: NOTICE : --- Running action sequence: bind
NOTICE:catalyst:--- Running action sequence: bind
15 May 2022 21:06:56 UTC: NOTICE : --- Running action sequence: chroot_setup
NOTICE:catalyst:--- Running action sequence: chroot_setup
15 May 2022 21:06:56 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
15 May 2022 21:06:56 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
15 May 2022 21:06:56 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
15 May 2022 21:06:56 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220515T161807Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220515T161807Z/etc/portage/make.conf
15 May 2022 21:06:56 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
15 May 2022 21:06:56 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
15 May 2022 21:06:56 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
15 May 2022 21:06:56 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220515T161807Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot sys-kernel/genkernel
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-kernel/linux-firmware-20220509
>>> Emerging binary (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging (2 of 3) sys-kernel/linux-firmware-20220509::gentoo
>>> Installing (2 of 3) sys-kernel/linux-firmware-20220509::gentoo
>>> Emerging binary (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
* Messages for package sys-kernel/linux-firmware-20220509:
* Building using saved configfile "/etc/portage/savedconfig/sys-kernel/linux-firmware"
* Your configuration for sys-kernel/linux-firmware-20220509 has been saved in
* "/etc/portage/savedconfig/sys-kernel/linux-firmware-20220509" for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-4.2.6-r2:
* Found the following problematic permissions:
*
* drwxrwxrwt /run
*
* Expected:
*
* drwxr-xr-x /run
*
* This is known to be causing problems for any UDEV-enabled service.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220515T161807Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --update gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging binary (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Emerging (2 of 2) sys-kernel/gentoo-sources-5.17.7::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-5.17.7::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.17.7:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.2.6^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20220515T161807Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20220515T161807Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20220515T161807Z.tar.bz2 all --no-lvm --no-dmraid --no-luks --kerncache=/tmp/kerncache/gentoo-kerncache-20220515T161807Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20220515T161807Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.17.7-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.17.7-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.17.7-gentoo-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.17.7-gentoo-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.17.7-gentoo-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.17.7-gentoo-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending util-linux cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
^[[32;01m*^[[0m >> Appending devicemanager cpio data ...
^[[31;01m*^[[0m ERROR: Command 'nice -n10 make -j4 -l4.0 V=1' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_devicemanager(): populate_binpkg(): gkbuild(): Failed to create binpkg of lvm-2.02.188!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
15 May 2022 21:59:49 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
15 May 2022 21:59:49 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
Command exited with non-zero status 2
7444.65user 378.77system 53:14.93elapsed 244%CPU (0avgtext+0avgdata 324688maxresident)k
0inputs+0outputs (702major+34072615minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20220515T161807Z.ogppH0/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2022-05-11 8:21 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2022-05-11 8:21 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20220511T023519Z.ma8je5/specs/installcd-stage2-minimal.spec
11 May 2022 07:32:03 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
11 May 2022 07:32:03 UTC: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
11 May 2022 07:32:03 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20220511T023519Z.ma8je5/specs/installcd-stage2-minimal.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20220511T023519Z.ma8je5/specs/installcd-stage2-minimal.spec
11 May 2022 07:32:03 UTC: NOTICE : Using target: livecd-stage2
NOTICE:catalyst:Using target: livecd-stage2
11 May 2022 07:32:03 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
NOTICE:catalyst:Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
11 May 2022 07:32:03 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220511T023519Z/
NOTICE:catalyst:Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220511T023519Z/
11 May 2022 07:32:03 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
11 May 2022 07:32:03 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220511T023519Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220511T023519Z
11 May 2022 07:32:03 UTC: NOTICE : --- Running action sequence: unpack
NOTICE:catalyst:--- Running action sequence: unpack
11 May 2022 07:32:03 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
NOTICE:catalyst:Resume: Target chroot is invalid, cleaning up...
11 May 2022 07:32:03 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
11 May 2022 07:32:03 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220511T023519Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220511T023519Z
11 May 2022 07:32:03 UTC: NOTICE : Clearing the chroot path ...
NOTICE:catalyst:Clearing the chroot path ...
11 May 2022 07:32:03 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220511T023519Z/
NOTICE:catalyst:Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220511T023519Z/
11 May 2022 07:32:03 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20220511T023519Z (this may take some time) ..
NOTICE:catalyst:to /home/catalyst/tmp/default/livecd-stage2-ia64-20220511T023519Z (this may take some time) ..
11 May 2022 07:32:23 UTC: NOTICE : --- Running action sequence: config_profile_link
NOTICE:catalyst:--- Running action sequence: config_profile_link
11 May 2022 07:32:23 UTC: NOTICE : --- Running action sequence: setup_confdir
NOTICE:catalyst:--- Running action sequence: setup_confdir
11 May 2022 07:32:23 UTC: NOTICE : --- Running action sequence: process_repos
NOTICE:catalyst:--- Running action sequence: process_repos
11 May 2022 07:32:23 UTC: NOTICE : --- Running action sequence: bind
NOTICE:catalyst:--- Running action sequence: bind
11 May 2022 07:32:23 UTC: NOTICE : --- Running action sequence: chroot_setup
NOTICE:catalyst:--- Running action sequence: chroot_setup
11 May 2022 07:32:23 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
11 May 2022 07:32:23 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
11 May 2022 07:32:23 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
11 May 2022 07:32:23 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220511T023519Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220511T023519Z/etc/portage/make.conf
11 May 2022 07:32:23 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
11 May 2022 07:32:23 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
11 May 2022 07:32:23 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
11 May 2022 07:32:23 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220511T023519Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot sys-kernel/genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20220411
>>> Emerging binary (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 3) sys-kernel/linux-firmware-20220411::gentoo
>>> Installing (2 of 3) sys-kernel/linux-firmware-20220411::gentoo
>>> Emerging binary (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
* Messages for package sys-kernel/linux-firmware-20220411:
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-4.2.6-r2:
* Found the following problematic permissions:
*
* drwxrwxrwt /run
*
* Expected:
*
* drwxr-xr-x /run
*
* This is known to be causing problems for any UDEV-enabled service.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220511T023519Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --update gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging binary (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Emerging (2 of 2) sys-kernel/gentoo-sources-5.17.6::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-5.17.6::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.17.6:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.2.6^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20220511T023519Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20220511T023519Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20220511T023519Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20220511T023519Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20220511T023519Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.17.6-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.17.6-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.17.6-gentoo-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.17.6-gentoo-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.17.6-gentoo-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.17.6-gentoo-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending util-linux cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
^[[32;01m*^[[0m >> Appending devicemanager cpio data ...
^[[31;01m*^[[0m ERROR: Command 'nice -n10 make -j4 -l4.0 V=1' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_devicemanager(): populate_binpkg(): gkbuild(): Failed to create binpkg of lvm-2.02.188!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
11 May 2022 08:21:18 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
11 May 2022 08:21:18 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
Command exited with non-zero status 2
7347.97user 357.59system 49:16.52elapsed 260%CPU (0avgtext+0avgdata 324688maxresident)k
0inputs+0outputs (740major+31877311minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20220511T023519Z.ma8je5/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2022-05-04 15:30 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2022-05-04 15:30 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20220504T034804Z.chQecx/specs/installcd-stage2-minimal.spec
04 May 2022 14:40:52 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
04 May 2022 14:40:52 UTC: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
04 May 2022 14:40:52 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20220504T034804Z.chQecx/specs/installcd-stage2-minimal.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20220504T034804Z.chQecx/specs/installcd-stage2-minimal.spec
04 May 2022 14:40:52 UTC: NOTICE : Using target: livecd-stage2
NOTICE:catalyst:Using target: livecd-stage2
04 May 2022 14:40:52 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
NOTICE:catalyst:Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
04 May 2022 14:40:52 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220504T034804Z/
NOTICE:catalyst:Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220504T034804Z/
04 May 2022 14:40:52 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
04 May 2022 14:40:52 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220504T034804Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220504T034804Z
04 May 2022 14:40:52 UTC: NOTICE : --- Running action sequence: unpack
NOTICE:catalyst:--- Running action sequence: unpack
04 May 2022 14:40:52 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
NOTICE:catalyst:Resume: Target chroot is invalid, cleaning up...
04 May 2022 14:40:52 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
04 May 2022 14:40:52 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220504T034804Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220504T034804Z
04 May 2022 14:40:52 UTC: NOTICE : Clearing the chroot path ...
NOTICE:catalyst:Clearing the chroot path ...
04 May 2022 14:40:52 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220504T034804Z/
NOTICE:catalyst:Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220504T034804Z/
04 May 2022 14:40:52 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20220504T034804Z (this may take some time) ..
NOTICE:catalyst:to /home/catalyst/tmp/default/livecd-stage2-ia64-20220504T034804Z (this may take some time) ..
04 May 2022 14:41:16 UTC: NOTICE : --- Running action sequence: config_profile_link
NOTICE:catalyst:--- Running action sequence: config_profile_link
04 May 2022 14:41:16 UTC: NOTICE : --- Running action sequence: setup_confdir
NOTICE:catalyst:--- Running action sequence: setup_confdir
04 May 2022 14:41:16 UTC: NOTICE : --- Running action sequence: process_repos
NOTICE:catalyst:--- Running action sequence: process_repos
04 May 2022 14:41:16 UTC: NOTICE : --- Running action sequence: bind
NOTICE:catalyst:--- Running action sequence: bind
04 May 2022 14:41:16 UTC: NOTICE : --- Running action sequence: chroot_setup
NOTICE:catalyst:--- Running action sequence: chroot_setup
04 May 2022 14:41:16 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
04 May 2022 14:41:16 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
04 May 2022 14:41:16 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
04 May 2022 14:41:16 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220504T034804Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220504T034804Z/etc/portage/make.conf
04 May 2022 14:41:16 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
04 May 2022 14:41:16 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
04 May 2022 14:41:16 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
04 May 2022 14:41:16 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220504T034804Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot sys-kernel/genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20220411
>>> Emerging binary (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 3) sys-kernel/linux-firmware-20220411::gentoo
>>> Installing (2 of 3) sys-kernel/linux-firmware-20220411::gentoo
>>> Emerging binary (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
* Messages for package sys-kernel/linux-firmware-20220411:
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-4.2.6-r2:
* Found the following problematic permissions:
*
* drwxrwxrwt /run
*
* Expected:
*
* drwxr-xr-x /run
*
* This is known to be causing problems for any UDEV-enabled service.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220504T034804Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --update gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging binary (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Emerging (2 of 2) sys-kernel/gentoo-sources-5.17.5::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-5.17.5::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.17.5:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.2.6^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20220504T034804Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20220504T034804Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20220504T034804Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20220504T034804Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20220504T034804Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.17.5-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.17.5-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.17.5-gentoo-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.17.5-gentoo-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.17.5-gentoo-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.17.5-gentoo-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending util-linux cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
^[[32;01m*^[[0m >> Appending devicemanager cpio data ...
^[[31;01m*^[[0m ERROR: Command 'nice -n10 make -j4 -l4.0 V=1' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_devicemanager(): populate_binpkg(): gkbuild(): Failed to create binpkg of lvm-2.02.188!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
04 May 2022 15:30:47 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
04 May 2022 15:30:47 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
Command exited with non-zero status 2
7344.07user 355.20system 49:56.40elapsed 256%CPU (0avgtext+0avgdata 324656maxresident)k
0inputs+0outputs (901major+31861919minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20220504T034804Z.chQecx/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2022-04-20 11:31 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2022-04-20 11:31 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20220420T025349Z.qjXaNo/specs/installcd-stage2-minimal.spec
20 Apr 2022 10:38:34 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
20 Apr 2022 10:38:34 UTC: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
20 Apr 2022 10:38:34 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20220420T025349Z.qjXaNo/specs/installcd-stage2-minimal.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20220420T025349Z.qjXaNo/specs/installcd-stage2-minimal.spec
20 Apr 2022 10:38:34 UTC: NOTICE : Using target: livecd-stage2
NOTICE:catalyst:Using target: livecd-stage2
20 Apr 2022 10:38:34 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
NOTICE:catalyst:Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
20 Apr 2022 10:38:34 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220420T025349Z/
NOTICE:catalyst:Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220420T025349Z/
20 Apr 2022 10:38:34 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
20 Apr 2022 10:38:34 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220420T025349Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220420T025349Z
20 Apr 2022 10:38:34 UTC: NOTICE : --- Running action sequence: unpack
NOTICE:catalyst:--- Running action sequence: unpack
20 Apr 2022 10:38:34 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
NOTICE:catalyst:Resume: Target chroot is invalid, cleaning up...
20 Apr 2022 10:38:34 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
20 Apr 2022 10:38:34 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220420T025349Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220420T025349Z
20 Apr 2022 10:38:34 UTC: NOTICE : Clearing the chroot path ...
NOTICE:catalyst:Clearing the chroot path ...
20 Apr 2022 10:38:34 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220420T025349Z/
NOTICE:catalyst:Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220420T025349Z/
20 Apr 2022 10:38:34 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20220420T025349Z (this may take some time) ..
NOTICE:catalyst:to /home/catalyst/tmp/default/livecd-stage2-ia64-20220420T025349Z (this may take some time) ..
20 Apr 2022 10:38:56 UTC: NOTICE : --- Running action sequence: config_profile_link
NOTICE:catalyst:--- Running action sequence: config_profile_link
20 Apr 2022 10:38:56 UTC: NOTICE : --- Running action sequence: setup_confdir
NOTICE:catalyst:--- Running action sequence: setup_confdir
20 Apr 2022 10:38:56 UTC: NOTICE : --- Running action sequence: process_repos
NOTICE:catalyst:--- Running action sequence: process_repos
20 Apr 2022 10:38:56 UTC: NOTICE : --- Running action sequence: bind
NOTICE:catalyst:--- Running action sequence: bind
20 Apr 2022 10:38:56 UTC: NOTICE : --- Running action sequence: chroot_setup
NOTICE:catalyst:--- Running action sequence: chroot_setup
20 Apr 2022 10:38:56 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
20 Apr 2022 10:38:56 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
20 Apr 2022 10:38:56 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
20 Apr 2022 10:38:56 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220420T025349Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220420T025349Z/etc/portage/make.conf
20 Apr 2022 10:38:56 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
20 Apr 2022 10:38:56 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
20 Apr 2022 10:38:56 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
20 Apr 2022 10:38:56 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220420T025349Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot sys-kernel/genkernel
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-kernel/linux-firmware-20220411
>>> Emerging binary (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging (2 of 3) sys-kernel/linux-firmware-20220411::gentoo
>>> Installing (2 of 3) sys-kernel/linux-firmware-20220411::gentoo
>>> Emerging binary (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
* Messages for package sys-kernel/linux-firmware-20220411:
* Building using saved configfile "/etc/portage/savedconfig/sys-kernel/linux-firmware"
* Your configuration for sys-kernel/linux-firmware-20220411 has been saved in
* "/etc/portage/savedconfig/sys-kernel/linux-firmware-20220411" for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-4.2.6-r2:
* Found the following problematic permissions:
*
* drwxrwxrwt /run
*
* Expected:
*
* drwxr-xr-x /run
*
* This is known to be causing problems for any UDEV-enabled service.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220420T025349Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --update gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging binary (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Emerging (2 of 2) sys-kernel/gentoo-sources-5.17.3::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-5.17.3::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.17.3:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.2.6^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20220420T025349Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20220420T025349Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20220420T025349Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20220420T025349Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20220420T025349Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.17.3-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.17.3-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.17.3-gentoo-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.17.3-gentoo-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.17.3-gentoo-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.17.3-gentoo-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending util-linux cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
^[[32;01m*^[[0m >> Appending devicemanager cpio data ...
^[[31;01m*^[[0m ERROR: Command 'nice -n10 make -j4 -l4.0 V=1' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_devicemanager(): populate_binpkg(): gkbuild(): Failed to create binpkg of lvm-2.02.188!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
20 Apr 2022 11:31:05 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
20 Apr 2022 11:31:05 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
Command exited with non-zero status 2
7454.93user 379.07system 52:33.09elapsed 248%CPU (0avgtext+0avgdata 324976maxresident)k
0inputs+0outputs (690major+34099608minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20220420T025349Z.qjXaNo/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2022-04-13 10:37 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2022-04-13 10:37 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20220413T030427Z.fsNzPi/specs/installcd-stage2-minimal.spec
13 Apr 2022 09:48:53 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
13 Apr 2022 09:48:53 UTC: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
13 Apr 2022 09:48:53 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20220413T030427Z.fsNzPi/specs/installcd-stage2-minimal.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20220413T030427Z.fsNzPi/specs/installcd-stage2-minimal.spec
13 Apr 2022 09:48:53 UTC: NOTICE : Using target: livecd-stage2
NOTICE:catalyst:Using target: livecd-stage2
13 Apr 2022 09:48:53 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
NOTICE:catalyst:Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
13 Apr 2022 09:48:53 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220413T030427Z/
NOTICE:catalyst:Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220413T030427Z/
13 Apr 2022 09:48:53 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
13 Apr 2022 09:48:53 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220413T030427Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220413T030427Z
13 Apr 2022 09:48:53 UTC: NOTICE : --- Running action sequence: unpack
NOTICE:catalyst:--- Running action sequence: unpack
13 Apr 2022 09:48:53 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
NOTICE:catalyst:Resume: Target chroot is invalid, cleaning up...
13 Apr 2022 09:48:53 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
13 Apr 2022 09:48:53 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220413T030427Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220413T030427Z
13 Apr 2022 09:48:53 UTC: NOTICE : Clearing the chroot path ...
NOTICE:catalyst:Clearing the chroot path ...
13 Apr 2022 09:48:53 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220413T030427Z/
NOTICE:catalyst:Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220413T030427Z/
13 Apr 2022 09:48:53 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20220413T030427Z (this may take some time) ..
NOTICE:catalyst:to /home/catalyst/tmp/default/livecd-stage2-ia64-20220413T030427Z (this may take some time) ..
13 Apr 2022 09:49:12 UTC: NOTICE : --- Running action sequence: config_profile_link
NOTICE:catalyst:--- Running action sequence: config_profile_link
13 Apr 2022 09:49:12 UTC: NOTICE : --- Running action sequence: setup_confdir
NOTICE:catalyst:--- Running action sequence: setup_confdir
13 Apr 2022 09:49:12 UTC: NOTICE : --- Running action sequence: process_repos
NOTICE:catalyst:--- Running action sequence: process_repos
13 Apr 2022 09:49:12 UTC: NOTICE : --- Running action sequence: bind
NOTICE:catalyst:--- Running action sequence: bind
13 Apr 2022 09:49:12 UTC: NOTICE : --- Running action sequence: chroot_setup
NOTICE:catalyst:--- Running action sequence: chroot_setup
13 Apr 2022 09:49:12 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
13 Apr 2022 09:49:12 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
13 Apr 2022 09:49:12 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
13 Apr 2022 09:49:12 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220413T030427Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220413T030427Z/etc/portage/make.conf
13 Apr 2022 09:49:12 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
13 Apr 2022 09:49:12 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
13 Apr 2022 09:49:12 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
13 Apr 2022 09:49:12 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220413T030427Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot sys-kernel/genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20220310
>>> Emerging binary (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 3) sys-kernel/linux-firmware-20220310::gentoo
>>> Installing (2 of 3) sys-kernel/linux-firmware-20220310::gentoo
>>> Emerging binary (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
* Messages for package sys-kernel/linux-firmware-20220310:
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-4.2.6-r2:
* Found the following problematic permissions:
*
* drwxrwxrwt /run
*
* Expected:
*
* drwxr-xr-x /run
*
* This is known to be causing problems for any UDEV-enabled service.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220413T030427Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --update gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging binary (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Emerging (2 of 2) sys-kernel/gentoo-sources-5.17.2::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-5.17.2::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.17.2:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.2.6^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20220413T030427Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20220413T030427Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20220413T030427Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20220413T030427Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20220413T030427Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.17.2-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.17.2-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.17.2-gentoo-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.17.2-gentoo-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.17.2-gentoo-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.17.2-gentoo-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending util-linux cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
^[[32;01m*^[[0m >> Appending devicemanager cpio data ...
/usr/share/genkernel/gen_worker.sh: line 68: 1613714 Aborted ./configure --prefix=/usr --build=ia64-unknown-linux-gnu --host=ia64-unknown-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-dependency-tracking --docdir=/usr/share/doc/lvm-2.02.188 --htmldir=/usr/share/doc/lvm-2.02.188/html --enable-static_link --enable-pkgconfig --enable-dmeventd --enable-cmdlib --disable-lvmetad --with-clvmd=none --with-cluster=none --disable-readline --disable-selinux --with-mirrors=internal --with-snapshots=internal --with-thin=internal --with-cache=internal --disable-udev-systemd-background-jobs --enable-udev_sync --enable-udev_rules --with-thin-check=/usr/sbin/thin_check --with-cache-check=/usr/sbin/cache_check --with-thin-dump=/usr/sbin/thin_dump --with-cache-dump=/usr/sbin/cache_dump --with-thin-repair=/usr/sbin/thin_repair --with-cache-repair=/usr/sbin/cache_repair --with-thin-restore=/usr/sbin/th
in_restore --with-cache-restore=/usr/sbin/cache_restore >> "/var/log/genkernel.log" 2>&1
^[[31;01m*^[[0m ERROR: Command './configure --prefix=/usr --build=ia64-unknown-linux-gnu --host=ia64-unknown-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-dependency-tracking --docdir=/usr/share/doc/lvm-2.02.188 --htmldir=/usr/share/doc/lvm-2.02.188/html --enable-static_link --enable-pkgconfig --enable-dmeventd --enable-cmdlib --disable-lvmetad --with-clvmd=none --with-cluster=none --disable-readline --disable-selinux --with-mirrors=internal --with-snapshots=internal --with-thin=internal --with-cache=internal --disable-udev-systemd-background-jobs --enable-udev_sync --enable-udev_rules --with-thin-check=/usr/sbin/thin_check --with-cache-check=/usr/sbin/cache_check --with-thin-dump=/usr/sbin/thin_dump --with-cache-dump=/usr/sbin/cache_dump --with-thin-repair=/usr/sbin/thin_repair --with-cache-repair=/usr/sbin/cache_repair --with-thin-restore=/usr/sbin/thin_restore --with-cache-restore=/usr/sbin/cache
_restore' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_devicemanager(): populate_binpkg(): gkbuild(): Failed to create binpkg of lvm-2.02.188!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
13 Apr 2022 10:37:37 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
13 Apr 2022 10:37:37 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
Command exited with non-zero status 2
7140.31user 341.96system 48:44.85elapsed 255%CPU (0avgtext+0avgdata 324576maxresident)k
0inputs+0outputs (1813major+30318645minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20220413T030427Z.fsNzPi/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2022-04-06 11:11 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2022-04-06 11:11 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20220406T010435Z.0ZBK23/specs/installcd-stage2-minimal.spec
06 Apr 2022 10:27:53 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
06 Apr 2022 10:27:53 UTC: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
06 Apr 2022 10:27:53 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20220406T010435Z.0ZBK23/specs/installcd-stage2-minimal.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20220406T010435Z.0ZBK23/specs/installcd-stage2-minimal.spec
06 Apr 2022 10:27:53 UTC: NOTICE : Using target: livecd-stage2
NOTICE:catalyst:Using target: livecd-stage2
06 Apr 2022 10:27:53 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
NOTICE:catalyst:Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
06 Apr 2022 10:27:53 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220406T010435Z/
NOTICE:catalyst:Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220406T010435Z/
06 Apr 2022 10:27:53 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
06 Apr 2022 10:27:53 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220406T010435Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220406T010435Z
06 Apr 2022 10:27:53 UTC: NOTICE : --- Running action sequence: unpack
NOTICE:catalyst:--- Running action sequence: unpack
06 Apr 2022 10:27:53 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
NOTICE:catalyst:Resume: Target chroot is invalid, cleaning up...
06 Apr 2022 10:27:53 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
06 Apr 2022 10:27:53 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220406T010435Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220406T010435Z
06 Apr 2022 10:27:53 UTC: NOTICE : Clearing the chroot path ...
NOTICE:catalyst:Clearing the chroot path ...
06 Apr 2022 10:27:53 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220406T010435Z/
NOTICE:catalyst:Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220406T010435Z/
06 Apr 2022 10:27:53 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20220406T010435Z (this may take some time) ..
NOTICE:catalyst:to /home/catalyst/tmp/default/livecd-stage2-ia64-20220406T010435Z (this may take some time) ..
06 Apr 2022 10:28:22 UTC: NOTICE : --- Running action sequence: config_profile_link
NOTICE:catalyst:--- Running action sequence: config_profile_link
06 Apr 2022 10:28:22 UTC: NOTICE : --- Running action sequence: setup_confdir
NOTICE:catalyst:--- Running action sequence: setup_confdir
06 Apr 2022 10:28:22 UTC: NOTICE : --- Running action sequence: process_repos
NOTICE:catalyst:--- Running action sequence: process_repos
06 Apr 2022 10:28:22 UTC: NOTICE : --- Running action sequence: bind
NOTICE:catalyst:--- Running action sequence: bind
06 Apr 2022 10:28:22 UTC: NOTICE : --- Running action sequence: chroot_setup
NOTICE:catalyst:--- Running action sequence: chroot_setup
06 Apr 2022 10:28:22 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
06 Apr 2022 10:28:22 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
06 Apr 2022 10:28:22 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
06 Apr 2022 10:28:22 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220406T010435Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220406T010435Z/etc/portage/make.conf
06 Apr 2022 10:28:22 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
06 Apr 2022 10:28:22 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
06 Apr 2022 10:28:22 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
06 Apr 2022 10:28:22 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220406T010435Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot sys-kernel/genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20220310
>>> Emerging binary (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 3) sys-kernel/linux-firmware-20220310::gentoo
>>> Installing (2 of 3) sys-kernel/linux-firmware-20220310::gentoo
>>> Emerging binary (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
* Messages for package sys-kernel/linux-firmware-20220310:
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-4.2.6-r2:
* Found the following problematic permissions:
*
* drwxrwxrwt /run
*
* Expected:
*
* drwxr-xr-x /run
*
* This is known to be causing problems for any UDEV-enabled service.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220406T010435Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --update gentoo-sources
>>> Emerging binary (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Emerging binary (2 of 2) sys-kernel/gentoo-sources-5.17.1-r1::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-5.17.1-r1::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.17.1-r1:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.2.6^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20220406T010435Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20220406T010435Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20220406T010435Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20220406T010435Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20220406T010435Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.17.1-gentoo-r1^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.17.1-gentoo-r1-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.17.1-gentoo-r1-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.17.1-gentoo-r1-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.17.1-gentoo-r1-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.17.1-gentoo-r1-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending util-linux cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
^[[31;01m*^[[0m ERROR: Command 'nice -n10 make -j4 -l4.0 V=1' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_eudev(): populate_binpkg(): gkbuild(): Failed to create binpkg of eudev-3.2.10!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
06 Apr 2022 11:11:25 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
06 Apr 2022 11:11:25 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
Command exited with non-zero status 2
6863.08user 300.45system 43:33.63elapsed 274%CPU (0avgtext+0avgdata 324976maxresident)k
0inputs+0outputs (460major+28168268minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20220406T010435Z.0ZBK23/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2022-03-30 9:50 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2022-03-30 9:50 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20220329T234937Z.ODwGT4/specs/installcd-stage2-minimal.spec
30 Mar 2022 09:02:09 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
30 Mar 2022 09:02:09 UTC: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
30 Mar 2022 09:02:09 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20220329T234937Z.ODwGT4/specs/installcd-stage2-minimal.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20220329T234937Z.ODwGT4/specs/installcd-stage2-minimal.spec
30 Mar 2022 09:02:09 UTC: NOTICE : Using target: livecd-stage2
NOTICE:catalyst:Using target: livecd-stage2
30 Mar 2022 09:02:09 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
NOTICE:catalyst:Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
30 Mar 2022 09:02:09 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220329T234937Z/
NOTICE:catalyst:Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220329T234937Z/
30 Mar 2022 09:02:09 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
30 Mar 2022 09:02:09 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220329T234937Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220329T234937Z
30 Mar 2022 09:02:09 UTC: NOTICE : --- Running action sequence: unpack
NOTICE:catalyst:--- Running action sequence: unpack
30 Mar 2022 09:02:09 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
NOTICE:catalyst:Resume: Target chroot is invalid, cleaning up...
30 Mar 2022 09:02:09 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
30 Mar 2022 09:02:09 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220329T234937Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220329T234937Z
30 Mar 2022 09:02:09 UTC: NOTICE : Clearing the chroot path ...
NOTICE:catalyst:Clearing the chroot path ...
30 Mar 2022 09:02:09 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220329T234937Z/
NOTICE:catalyst:Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220329T234937Z/
30 Mar 2022 09:02:09 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20220329T234937Z (this may take some time) ..
NOTICE:catalyst:to /home/catalyst/tmp/default/livecd-stage2-ia64-20220329T234937Z (this may take some time) ..
30 Mar 2022 09:02:28 UTC: NOTICE : --- Running action sequence: config_profile_link
NOTICE:catalyst:--- Running action sequence: config_profile_link
30 Mar 2022 09:02:28 UTC: NOTICE : --- Running action sequence: setup_confdir
NOTICE:catalyst:--- Running action sequence: setup_confdir
30 Mar 2022 09:02:29 UTC: NOTICE : --- Running action sequence: process_repos
NOTICE:catalyst:--- Running action sequence: process_repos
30 Mar 2022 09:02:29 UTC: NOTICE : --- Running action sequence: bind
NOTICE:catalyst:--- Running action sequence: bind
30 Mar 2022 09:02:29 UTC: NOTICE : --- Running action sequence: chroot_setup
NOTICE:catalyst:--- Running action sequence: chroot_setup
30 Mar 2022 09:02:29 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
30 Mar 2022 09:02:29 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
30 Mar 2022 09:02:29 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
30 Mar 2022 09:02:29 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220329T234937Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220329T234937Z/etc/portage/make.conf
30 Mar 2022 09:02:29 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
30 Mar 2022 09:02:29 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
30 Mar 2022 09:02:29 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
30 Mar 2022 09:02:29 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220329T234937Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot sys-kernel/genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20220310
>>> Emerging binary (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 3) sys-kernel/linux-firmware-20220310::gentoo
>>> Installing (2 of 3) sys-kernel/linux-firmware-20220310::gentoo
>>> Emerging binary (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
* Messages for package sys-kernel/linux-firmware-20220310:
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-4.2.6-r2:
* Found the following problematic permissions:
*
* drwxrwxrwt /run
*
* Expected:
*
* drwxr-xr-x /run
*
* This is known to be causing problems for any UDEV-enabled service.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220329T234937Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --update gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging binary (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Emerging (2 of 2) sys-kernel/gentoo-sources-5.17.1-r1::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-5.17.1-r1::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.17.1-r1:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.2.6^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20220329T234937Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20220329T234937Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20220329T234937Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20220329T234937Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20220329T234937Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.17.1-gentoo-r1^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.17.1-gentoo-r1-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.17.1-gentoo-r1-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.17.1-gentoo-r1-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.17.1-gentoo-r1-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.17.1-gentoo-r1-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending util-linux cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
^[[32;01m*^[[0m >> Appending devicemanager cpio data ...
^[[31;01m*^[[0m ERROR: Command 'nice -n10 make -j4 -l4.0 V=1' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_devicemanager(): populate_binpkg(): gkbuild(): Failed to create binpkg of lvm-2.02.188!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
30 Mar 2022 09:50:43 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
30 Mar 2022 09:50:43 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
Command exited with non-zero status 2
7328.64user 354.67system 48:35.26elapsed 263%CPU (0avgtext+0avgdata 324976maxresident)k
0inputs+0outputs (558major+31941032minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20220329T234937Z.ODwGT4/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2022-03-23 13:18 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2022-03-23 13:18 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20220323T013433Z.CzExeZ/specs/installcd-stage2-minimal.spec
23 Mar 2022 12:29:47 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
23 Mar 2022 12:29:47 UTC: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
23 Mar 2022 12:29:47 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20220323T013433Z.CzExeZ/specs/installcd-stage2-minimal.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20220323T013433Z.CzExeZ/specs/installcd-stage2-minimal.spec
23 Mar 2022 12:29:47 UTC: NOTICE : Using target: livecd-stage2
NOTICE:catalyst:Using target: livecd-stage2
23 Mar 2022 12:29:47 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
NOTICE:catalyst:Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
23 Mar 2022 12:29:47 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220323T013433Z/
NOTICE:catalyst:Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220323T013433Z/
23 Mar 2022 12:29:47 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
23 Mar 2022 12:29:47 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220323T013433Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220323T013433Z
23 Mar 2022 12:29:47 UTC: NOTICE : --- Running action sequence: unpack
NOTICE:catalyst:--- Running action sequence: unpack
23 Mar 2022 12:29:47 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
NOTICE:catalyst:Resume: Target chroot is invalid, cleaning up...
23 Mar 2022 12:29:47 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
23 Mar 2022 12:29:47 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220323T013433Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220323T013433Z
23 Mar 2022 12:29:47 UTC: NOTICE : Clearing the chroot path ...
NOTICE:catalyst:Clearing the chroot path ...
23 Mar 2022 12:29:47 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220323T013433Z/
NOTICE:catalyst:Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220323T013433Z/
23 Mar 2022 12:29:47 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20220323T013433Z (this may take some time) ..
NOTICE:catalyst:to /home/catalyst/tmp/default/livecd-stage2-ia64-20220323T013433Z (this may take some time) ..
23 Mar 2022 12:30:07 UTC: NOTICE : --- Running action sequence: config_profile_link
NOTICE:catalyst:--- Running action sequence: config_profile_link
23 Mar 2022 12:30:08 UTC: NOTICE : --- Running action sequence: setup_confdir
NOTICE:catalyst:--- Running action sequence: setup_confdir
23 Mar 2022 12:30:08 UTC: NOTICE : --- Running action sequence: process_repos
NOTICE:catalyst:--- Running action sequence: process_repos
23 Mar 2022 12:30:08 UTC: NOTICE : --- Running action sequence: bind
NOTICE:catalyst:--- Running action sequence: bind
23 Mar 2022 12:30:08 UTC: NOTICE : --- Running action sequence: chroot_setup
NOTICE:catalyst:--- Running action sequence: chroot_setup
23 Mar 2022 12:30:08 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
23 Mar 2022 12:30:08 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
23 Mar 2022 12:30:08 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
23 Mar 2022 12:30:08 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220323T013433Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220323T013433Z/etc/portage/make.conf
23 Mar 2022 12:30:08 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
23 Mar 2022 12:30:08 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
23 Mar 2022 12:30:08 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
23 Mar 2022 12:30:08 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220323T013433Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot sys-kernel/genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20220310
>>> Emerging binary (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 3) sys-kernel/linux-firmware-20220310::gentoo
>>> Installing (2 of 3) sys-kernel/linux-firmware-20220310::gentoo
>>> Emerging binary (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
* Messages for package sys-kernel/linux-firmware-20220310:
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-4.2.6-r2:
* Found the following problematic permissions:
*
* drwxrwxrwt /run
*
* Expected:
*
* drwxr-xr-x /run
*
* This is known to be causing problems for any UDEV-enabled service.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220323T013433Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --update gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging binary (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Emerging (2 of 2) sys-kernel/gentoo-sources-5.17.0::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-5.17.0::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.17.0:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.2.6^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20220323T013433Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20220323T013433Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20220323T013433Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20220323T013433Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20220323T013433Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.17.0-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.17.0-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.17.0-gentoo-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.17.0-gentoo-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.17.0-gentoo-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.17.0-gentoo-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending util-linux cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
^[[32;01m*^[[0m >> Appending devicemanager cpio data ...
^[[31;01m*^[[0m ERROR: Command 'nice -n10 make -j4 -l4.0 V=1' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_devicemanager(): populate_binpkg(): gkbuild(): Failed to create binpkg of lvm-2.02.188!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
23 Mar 2022 13:18:55 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
23 Mar 2022 13:18:55 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
Command exited with non-zero status 2
7370.46user 353.45system 49:09.87elapsed 261%CPU (0avgtext+0avgdata 324896maxresident)k
0inputs+0outputs (720major+31151000minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20220323T013433Z.CzExeZ/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2022-03-16 8:56 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2022-03-16 8:56 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20220316T024927Z.3kqMFW/specs/installcd-stage2-minimal.spec
16 Mar 2022 08:03:47 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
16 Mar 2022 08:03:47 UTC: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
16 Mar 2022 08:03:47 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20220316T024927Z.3kqMFW/specs/installcd-stage2-minimal.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20220316T024927Z.3kqMFW/specs/installcd-stage2-minimal.spec
16 Mar 2022 08:03:47 UTC: NOTICE : Using target: livecd-stage2
NOTICE:catalyst:Using target: livecd-stage2
16 Mar 2022 08:03:47 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
NOTICE:catalyst:Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
16 Mar 2022 08:03:47 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220316T024927Z/
NOTICE:catalyst:Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220316T024927Z/
16 Mar 2022 08:03:47 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
16 Mar 2022 08:03:47 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220316T024927Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220316T024927Z
16 Mar 2022 08:03:47 UTC: NOTICE : --- Running action sequence: unpack
NOTICE:catalyst:--- Running action sequence: unpack
16 Mar 2022 08:03:47 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
NOTICE:catalyst:Resume: Target chroot is invalid, cleaning up...
16 Mar 2022 08:03:47 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
16 Mar 2022 08:03:47 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220316T024927Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220316T024927Z
16 Mar 2022 08:03:47 UTC: NOTICE : Clearing the chroot path ...
NOTICE:catalyst:Clearing the chroot path ...
16 Mar 2022 08:03:47 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220316T024927Z/
NOTICE:catalyst:Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220316T024927Z/
16 Mar 2022 08:03:47 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20220316T024927Z (this may take some time) ..
NOTICE:catalyst:to /home/catalyst/tmp/default/livecd-stage2-ia64-20220316T024927Z (this may take some time) ..
16 Mar 2022 08:04:07 UTC: NOTICE : --- Running action sequence: config_profile_link
NOTICE:catalyst:--- Running action sequence: config_profile_link
16 Mar 2022 08:04:07 UTC: NOTICE : --- Running action sequence: setup_confdir
NOTICE:catalyst:--- Running action sequence: setup_confdir
16 Mar 2022 08:04:07 UTC: NOTICE : --- Running action sequence: process_repos
NOTICE:catalyst:--- Running action sequence: process_repos
16 Mar 2022 08:04:07 UTC: NOTICE : --- Running action sequence: bind
NOTICE:catalyst:--- Running action sequence: bind
16 Mar 2022 08:04:07 UTC: NOTICE : --- Running action sequence: chroot_setup
NOTICE:catalyst:--- Running action sequence: chroot_setup
16 Mar 2022 08:04:07 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
16 Mar 2022 08:04:07 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
16 Mar 2022 08:04:07 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
16 Mar 2022 08:04:07 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220316T024927Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220316T024927Z/etc/portage/make.conf
16 Mar 2022 08:04:07 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
16 Mar 2022 08:04:07 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
16 Mar 2022 08:04:07 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
16 Mar 2022 08:04:07 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220316T024927Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot sys-kernel/genkernel
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-kernel/linux-firmware-20220310
>>> Emerging binary (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging (2 of 3) sys-kernel/linux-firmware-20220310::gentoo
>>> Installing (2 of 3) sys-kernel/linux-firmware-20220310::gentoo
>>> Emerging binary (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
* Messages for package sys-kernel/linux-firmware-20220310:
* Building using saved configfile "/etc/portage/savedconfig/sys-kernel/linux-firmware"
* Your configuration for sys-kernel/linux-firmware-20220310 has been saved in
* "/etc/portage/savedconfig/sys-kernel/linux-firmware-20220310" for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-4.2.6-r2:
* Found the following problematic permissions:
*
* drwxrwxrwt /run
*
* Expected:
*
* drwxr-xr-x /run
*
* This is known to be causing problems for any UDEV-enabled service.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220316T024927Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --update gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging binary (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Emerging (2 of 2) sys-kernel/gentoo-sources-5.16.14::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-5.16.14::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.16.14:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.2.6^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20220316T024927Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20220316T024927Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20220316T024927Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20220316T024927Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20220316T024927Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.16.14-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.16.14-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.16.14-gentoo-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.16.14-gentoo-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.16.14-gentoo-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.16.14-gentoo-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending util-linux cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
^[[32;01m*^[[0m >> Appending devicemanager cpio data ...
^[[31;01m*^[[0m ERROR: Command 'nice -n10 make -j4 -l4.0 V=1' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_devicemanager(): populate_binpkg(): gkbuild(): Failed to create binpkg of lvm-2.02.188!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
16 Mar 2022 08:56:38 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
16 Mar 2022 08:56:38 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
Command exited with non-zero status 2
7486.44user 373.25system 52:52.70elapsed 247%CPU (0avgtext+0avgdata 324560maxresident)k
0inputs+0outputs (1611major+33529575minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20220316T024927Z.3kqMFW/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2022-03-09 11:00 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2022-03-09 11:00 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20220309T020647Z.TyzphY/specs/installcd-stage2-minimal.spec
09 Mar 2022 10:10:41 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
09 Mar 2022 10:10:41 UTC: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
09 Mar 2022 10:10:41 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20220309T020647Z.TyzphY/specs/installcd-stage2-minimal.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20220309T020647Z.TyzphY/specs/installcd-stage2-minimal.spec
09 Mar 2022 10:10:41 UTC: NOTICE : Using target: livecd-stage2
NOTICE:catalyst:Using target: livecd-stage2
09 Mar 2022 10:10:41 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
NOTICE:catalyst:Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
09 Mar 2022 10:10:41 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220309T020647Z/
NOTICE:catalyst:Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220309T020647Z/
09 Mar 2022 10:10:41 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
09 Mar 2022 10:10:41 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220309T020647Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220309T020647Z
09 Mar 2022 10:10:41 UTC: NOTICE : --- Running action sequence: unpack
NOTICE:catalyst:--- Running action sequence: unpack
09 Mar 2022 10:10:41 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
NOTICE:catalyst:Resume: Target chroot is invalid, cleaning up...
09 Mar 2022 10:10:41 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
09 Mar 2022 10:10:41 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220309T020647Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220309T020647Z
09 Mar 2022 10:10:41 UTC: NOTICE : Clearing the chroot path ...
NOTICE:catalyst:Clearing the chroot path ...
09 Mar 2022 10:10:41 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220309T020647Z/
NOTICE:catalyst:Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220309T020647Z/
09 Mar 2022 10:10:41 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20220309T020647Z (this may take some time) ..
NOTICE:catalyst:to /home/catalyst/tmp/default/livecd-stage2-ia64-20220309T020647Z (this may take some time) ..
09 Mar 2022 10:11:01 UTC: NOTICE : --- Running action sequence: config_profile_link
NOTICE:catalyst:--- Running action sequence: config_profile_link
09 Mar 2022 10:11:01 UTC: NOTICE : --- Running action sequence: setup_confdir
NOTICE:catalyst:--- Running action sequence: setup_confdir
09 Mar 2022 10:11:01 UTC: NOTICE : --- Running action sequence: process_repos
NOTICE:catalyst:--- Running action sequence: process_repos
09 Mar 2022 10:11:01 UTC: NOTICE : --- Running action sequence: bind
NOTICE:catalyst:--- Running action sequence: bind
09 Mar 2022 10:11:01 UTC: NOTICE : --- Running action sequence: chroot_setup
NOTICE:catalyst:--- Running action sequence: chroot_setup
09 Mar 2022 10:11:01 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
09 Mar 2022 10:11:01 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
09 Mar 2022 10:11:01 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
09 Mar 2022 10:11:01 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220309T020647Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220309T020647Z/etc/portage/make.conf
09 Mar 2022 10:11:01 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
09 Mar 2022 10:11:01 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
09 Mar 2022 10:11:01 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
09 Mar 2022 10:11:01 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220309T020647Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot sys-kernel/genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20220209
>>> Emerging binary (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 3) sys-kernel/linux-firmware-20220209::gentoo
>>> Installing (2 of 3) sys-kernel/linux-firmware-20220209::gentoo
>>> Emerging binary (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
* Messages for package sys-kernel/linux-firmware-20220209:
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-4.2.6-r2:
* Found the following problematic permissions:
*
* drwxrwxrwt /run
*
* Expected:
*
* drwxr-xr-x /run
*
* This is known to be causing problems for any UDEV-enabled service.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220309T020647Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --update gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging binary (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Emerging (2 of 2) sys-kernel/gentoo-sources-5.16.13::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-5.16.13::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.16.13:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.2.6^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20220309T020647Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20220309T020647Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20220309T020647Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20220309T020647Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20220309T020647Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.16.13-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.16.13-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.16.13-gentoo-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.16.13-gentoo-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.16.13-gentoo-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.16.13-gentoo-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending util-linux cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
^[[32;01m*^[[0m >> Appending devicemanager cpio data ...
^[[31;01m*^[[0m ERROR: Command 'nice -n10 make -j4 -l4.0 V=1' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_devicemanager(): populate_binpkg(): gkbuild(): Failed to create binpkg of lvm-2.02.188!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
09 Mar 2022 11:00:47 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
09 Mar 2022 11:00:47 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
Command exited with non-zero status 2
7401.01user 352.55system 50:07.58elapsed 257%CPU (0avgtext+0avgdata 324560maxresident)k
0inputs+0outputs (1021major+31385632minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20220309T020647Z.TyzphY/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2022-03-02 9:38 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2022-03-02 9:38 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20220302T040711Z.wxccBA/specs/installcd-stage2-minimal.spec
02 Mar 2022 08:48:29 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
02 Mar 2022 08:48:29 UTC: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
02 Mar 2022 08:48:29 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20220302T040711Z.wxccBA/specs/installcd-stage2-minimal.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20220302T040711Z.wxccBA/specs/installcd-stage2-minimal.spec
02 Mar 2022 08:48:29 UTC: NOTICE : Using target: livecd-stage2
NOTICE:catalyst:Using target: livecd-stage2
02 Mar 2022 08:48:29 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
NOTICE:catalyst:Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
02 Mar 2022 08:48:29 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220302T040711Z/
NOTICE:catalyst:Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220302T040711Z/
02 Mar 2022 08:48:29 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
02 Mar 2022 08:48:29 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220302T040711Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220302T040711Z
02 Mar 2022 08:48:29 UTC: NOTICE : --- Running action sequence: unpack
NOTICE:catalyst:--- Running action sequence: unpack
02 Mar 2022 08:48:29 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
NOTICE:catalyst:Resume: Target chroot is invalid, cleaning up...
02 Mar 2022 08:48:29 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
02 Mar 2022 08:48:29 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220302T040711Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220302T040711Z
02 Mar 2022 08:48:29 UTC: NOTICE : Clearing the chroot path ...
NOTICE:catalyst:Clearing the chroot path ...
02 Mar 2022 08:48:29 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220302T040711Z/
NOTICE:catalyst:Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220302T040711Z/
02 Mar 2022 08:48:29 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20220302T040711Z (this may take some time) ..
NOTICE:catalyst:to /home/catalyst/tmp/default/livecd-stage2-ia64-20220302T040711Z (this may take some time) ..
02 Mar 2022 08:48:50 UTC: NOTICE : --- Running action sequence: config_profile_link
NOTICE:catalyst:--- Running action sequence: config_profile_link
02 Mar 2022 08:48:50 UTC: NOTICE : --- Running action sequence: setup_confdir
NOTICE:catalyst:--- Running action sequence: setup_confdir
02 Mar 2022 08:48:50 UTC: NOTICE : --- Running action sequence: process_repos
NOTICE:catalyst:--- Running action sequence: process_repos
02 Mar 2022 08:48:50 UTC: NOTICE : --- Running action sequence: bind
NOTICE:catalyst:--- Running action sequence: bind
02 Mar 2022 08:48:50 UTC: NOTICE : --- Running action sequence: chroot_setup
NOTICE:catalyst:--- Running action sequence: chroot_setup
02 Mar 2022 08:48:50 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
02 Mar 2022 08:48:50 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
02 Mar 2022 08:48:50 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
02 Mar 2022 08:48:50 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220302T040711Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220302T040711Z/etc/portage/make.conf
02 Mar 2022 08:48:50 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
02 Mar 2022 08:48:50 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
02 Mar 2022 08:48:50 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
02 Mar 2022 08:48:50 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220302T040711Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot sys-kernel/genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20220209
>>> Emerging binary (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 3) sys-kernel/linux-firmware-20220209::gentoo
>>> Installing (2 of 3) sys-kernel/linux-firmware-20220209::gentoo
>>> Emerging binary (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
* Messages for package sys-kernel/linux-firmware-20220209:
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-4.2.6-r2:
* Found the following problematic permissions:
*
* drwxrwxrwt /run
*
* Expected:
*
* drwxr-xr-x /run
*
* This is known to be causing problems for any UDEV-enabled service.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220302T040711Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --update gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging binary (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Emerging (2 of 2) sys-kernel/gentoo-sources-5.16.11::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-5.16.11::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.16.11:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.2.6^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20220302T040711Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20220302T040711Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20220302T040711Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20220302T040711Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20220302T040711Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.16.11-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.16.11-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.16.11-gentoo-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.16.11-gentoo-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.16.11-gentoo-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.16.11-gentoo-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending util-linux cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
^[[32;01m*^[[0m >> Appending devicemanager cpio data ...
^[[31;01m*^[[0m ERROR: Command 'nice -n10 make -j4 -l4.0 V=1' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_devicemanager(): populate_binpkg(): gkbuild(): Failed to create binpkg of lvm-2.02.188!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
02 Mar 2022 09:38:19 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
02 Mar 2022 09:38:19 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
Command exited with non-zero status 2
7388.36user 351.35system 49:51.70elapsed 258%CPU (0avgtext+0avgdata 324896maxresident)k
0inputs+0outputs (611major+31391423minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20220302T040711Z.wxccBA/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2022-02-23 12:07 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2022-02-23 12:07 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20220223T032202Z.yE4ch3/specs/installcd-stage2-minimal.spec
23 Feb 2022 10:57:12 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
23 Feb 2022 10:57:12 UTC: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
23 Feb 2022 10:57:12 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20220223T032202Z.yE4ch3/specs/installcd-stage2-minimal.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20220223T032202Z.yE4ch3/specs/installcd-stage2-minimal.spec
23 Feb 2022 10:57:12 UTC: NOTICE : Using target: livecd-stage2
NOTICE:catalyst:Using target: livecd-stage2
23 Feb 2022 10:57:12 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
NOTICE:catalyst:Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
23 Feb 2022 10:57:12 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220223T032202Z/
NOTICE:catalyst:Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220223T032202Z/
23 Feb 2022 10:57:12 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
23 Feb 2022 10:57:12 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220223T032202Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220223T032202Z
23 Feb 2022 10:57:12 UTC: NOTICE : --- Running action sequence: unpack
NOTICE:catalyst:--- Running action sequence: unpack
23 Feb 2022 10:57:12 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
NOTICE:catalyst:Resume: Target chroot is invalid, cleaning up...
23 Feb 2022 10:57:12 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
23 Feb 2022 10:57:12 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220223T032202Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220223T032202Z
23 Feb 2022 10:57:12 UTC: NOTICE : Clearing the chroot path ...
NOTICE:catalyst:Clearing the chroot path ...
23 Feb 2022 10:57:12 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220223T032202Z/
NOTICE:catalyst:Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220223T032202Z/
23 Feb 2022 10:57:12 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20220223T032202Z (this may take some time) ..
NOTICE:catalyst:to /home/catalyst/tmp/default/livecd-stage2-ia64-20220223T032202Z (this may take some time) ..
23 Feb 2022 10:57:32 UTC: NOTICE : --- Running action sequence: config_profile_link
NOTICE:catalyst:--- Running action sequence: config_profile_link
23 Feb 2022 10:57:32 UTC: NOTICE : --- Running action sequence: setup_confdir
NOTICE:catalyst:--- Running action sequence: setup_confdir
23 Feb 2022 10:57:32 UTC: NOTICE : --- Running action sequence: process_repos
NOTICE:catalyst:--- Running action sequence: process_repos
23 Feb 2022 10:57:32 UTC: NOTICE : --- Running action sequence: bind
NOTICE:catalyst:--- Running action sequence: bind
23 Feb 2022 10:57:32 UTC: NOTICE : --- Running action sequence: chroot_setup
NOTICE:catalyst:--- Running action sequence: chroot_setup
23 Feb 2022 10:57:32 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
23 Feb 2022 10:57:32 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
23 Feb 2022 10:57:32 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
23 Feb 2022 10:57:32 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220223T032202Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220223T032202Z/etc/portage/make.conf
23 Feb 2022 10:57:32 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
23 Feb 2022 10:57:32 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
23 Feb 2022 10:57:32 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
23 Feb 2022 10:57:32 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220223T032202Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot sys-kernel/genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20220209
>>> Emerging binary (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 3) sys-kernel/linux-firmware-20220209::gentoo
>>> Installing (2 of 3) sys-kernel/linux-firmware-20220209::gentoo
>>> Emerging binary (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
* Messages for package sys-kernel/linux-firmware-20220209:
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-4.2.6-r2:
* Found the following problematic permissions:
*
* drwxrwxrwt /run
*
* Expected:
*
* drwxr-xr-x /run
*
* This is known to be causing problems for any UDEV-enabled service.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220223T032202Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --update gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging binary (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Emerging (2 of 2) sys-kernel/gentoo-sources-5.16.10::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-5.16.10::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.16.10:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.2.6^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20220223T032202Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20220223T032202Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20220223T032202Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20220223T032202Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20220223T032202Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.16.10-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.16.10-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.16.10-gentoo-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.16.10-gentoo-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.16.10-gentoo-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.16.10-gentoo-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending util-linux cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
^[[32;01m*^[[0m >> Appending devicemanager cpio data ...
^[[31;01m*^[[0m ERROR: Command 'nice -n10 make -j4 -l4.0 V=1' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_devicemanager(): populate_binpkg(): gkbuild(): Failed to create binpkg of lvm-2.02.188!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
23 Feb 2022 12:07:08 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
23 Feb 2022 12:07:08 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
Command exited with non-zero status 2
7439.75user 359.25system 1:09:56elapsed 185%CPU (0avgtext+0avgdata 324560maxresident)k
0inputs+0outputs (1471major+31387958minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20220223T032202Z.yE4ch3/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2022-02-16 8:27 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2022-02-16 8:27 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20220216T032203Z.2i1BdV/specs/installcd-stage2-minimal.spec
16 Feb 2022 07:34:24 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
16 Feb 2022 07:34:24 UTC: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
16 Feb 2022 07:34:24 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20220216T032203Z.2i1BdV/specs/installcd-stage2-minimal.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20220216T032203Z.2i1BdV/specs/installcd-stage2-minimal.spec
16 Feb 2022 07:34:24 UTC: NOTICE : Using target: livecd-stage2
NOTICE:catalyst:Using target: livecd-stage2
16 Feb 2022 07:34:24 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
NOTICE:catalyst:Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
16 Feb 2022 07:34:24 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220216T032203Z/
NOTICE:catalyst:Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220216T032203Z/
16 Feb 2022 07:34:24 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
16 Feb 2022 07:34:24 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220216T032203Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220216T032203Z
16 Feb 2022 07:34:24 UTC: NOTICE : --- Running action sequence: unpack
NOTICE:catalyst:--- Running action sequence: unpack
16 Feb 2022 07:34:24 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
NOTICE:catalyst:Resume: Target chroot is invalid, cleaning up...
16 Feb 2022 07:34:24 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
16 Feb 2022 07:34:24 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220216T032203Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220216T032203Z
16 Feb 2022 07:34:24 UTC: NOTICE : Clearing the chroot path ...
NOTICE:catalyst:Clearing the chroot path ...
16 Feb 2022 07:34:24 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220216T032203Z/
NOTICE:catalyst:Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220216T032203Z/
16 Feb 2022 07:34:24 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20220216T032203Z (this may take some time) ..
NOTICE:catalyst:to /home/catalyst/tmp/default/livecd-stage2-ia64-20220216T032203Z (this may take some time) ..
16 Feb 2022 07:35:07 UTC: NOTICE : --- Running action sequence: config_profile_link
NOTICE:catalyst:--- Running action sequence: config_profile_link
16 Feb 2022 07:35:07 UTC: NOTICE : --- Running action sequence: setup_confdir
NOTICE:catalyst:--- Running action sequence: setup_confdir
16 Feb 2022 07:35:07 UTC: NOTICE : --- Running action sequence: process_repos
NOTICE:catalyst:--- Running action sequence: process_repos
16 Feb 2022 07:35:07 UTC: NOTICE : --- Running action sequence: bind
NOTICE:catalyst:--- Running action sequence: bind
16 Feb 2022 07:35:07 UTC: NOTICE : --- Running action sequence: chroot_setup
NOTICE:catalyst:--- Running action sequence: chroot_setup
16 Feb 2022 07:35:07 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
16 Feb 2022 07:35:07 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
16 Feb 2022 07:35:07 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
16 Feb 2022 07:35:07 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220216T032203Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220216T032203Z/etc/portage/make.conf
16 Feb 2022 07:35:07 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
16 Feb 2022 07:35:07 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
16 Feb 2022 07:35:07 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
16 Feb 2022 07:35:07 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220216T032203Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot sys-kernel/genkernel
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-kernel/linux-firmware-20220209
>>> Emerging binary (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging (2 of 3) sys-kernel/linux-firmware-20220209::gentoo
>>> Installing (2 of 3) sys-kernel/linux-firmware-20220209::gentoo
>>> Emerging binary (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
* Messages for package sys-kernel/linux-firmware-20220209:
* Building using saved configfile "/etc/portage/savedconfig/sys-kernel/linux-firmware"
* Your configuration for sys-kernel/linux-firmware-20220209 has been saved in
* "/etc/portage/savedconfig/sys-kernel/linux-firmware-20220209" for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-4.2.6-r2:
* Found the following problematic permissions:
*
* drwxrwxrwt /run
*
* Expected:
*
* drwxr-xr-x /run
*
* This is known to be causing problems for any UDEV-enabled service.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220216T032203Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --update gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging binary (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Emerging (2 of 2) sys-kernel/gentoo-sources-5.16.9::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-5.16.9::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.16.9:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.2.6^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20220216T032203Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20220216T032203Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20220216T032203Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20220216T032203Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20220216T032203Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.16.9-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.16.9-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.16.9-gentoo-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.16.9-gentoo-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.16.9-gentoo-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.16.9-gentoo-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending util-linux cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
^[[32;01m*^[[0m >> Appending devicemanager cpio data ...
^[[31;01m*^[[0m ERROR: Command 'nice -n10 make -j4 -l4.0 V=1' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_devicemanager(): populate_binpkg(): gkbuild(): Failed to create binpkg of lvm-2.02.188!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
16 Feb 2022 08:27:23 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
16 Feb 2022 08:27:23 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.8/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.8/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
Command exited with non-zero status 2
7479.50user 371.32system 53:00.25elapsed 246%CPU (0avgtext+0avgdata 324896maxresident)k
0inputs+0outputs (616major+33478296minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20220216T032203Z.2i1BdV/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2022-02-09 9:41 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2022-02-09 9:41 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20220209T015108Z.Ruqmbk/specs/installcd-stage2-minimal.spec
09 Feb 2022 08:51:26 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
09 Feb 2022 08:51:26 UTC: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
09 Feb 2022 08:51:26 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20220209T015108Z.Ruqmbk/specs/installcd-stage2-minimal.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20220209T015108Z.Ruqmbk/specs/installcd-stage2-minimal.spec
09 Feb 2022 08:51:26 UTC: NOTICE : Using target: livecd-stage2
NOTICE:catalyst:Using target: livecd-stage2
09 Feb 2022 08:51:26 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
NOTICE:catalyst:Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
09 Feb 2022 08:51:26 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220209T015108Z/
NOTICE:catalyst:Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220209T015108Z/
09 Feb 2022 08:51:26 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
09 Feb 2022 08:51:26 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220209T015108Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220209T015108Z
09 Feb 2022 08:51:26 UTC: NOTICE : --- Running action sequence: unpack
NOTICE:catalyst:--- Running action sequence: unpack
09 Feb 2022 08:51:26 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
NOTICE:catalyst:Resume: Target chroot is invalid, cleaning up...
09 Feb 2022 08:51:26 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
09 Feb 2022 08:51:26 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220209T015108Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220209T015108Z
09 Feb 2022 08:51:26 UTC: NOTICE : Clearing the chroot path ...
NOTICE:catalyst:Clearing the chroot path ...
09 Feb 2022 08:51:26 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220209T015108Z/
NOTICE:catalyst:Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220209T015108Z/
09 Feb 2022 08:51:26 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20220209T015108Z (this may take some time) ..
NOTICE:catalyst:to /home/catalyst/tmp/default/livecd-stage2-ia64-20220209T015108Z (this may take some time) ..
09 Feb 2022 08:51:48 UTC: NOTICE : --- Running action sequence: config_profile_link
NOTICE:catalyst:--- Running action sequence: config_profile_link
09 Feb 2022 08:51:48 UTC: NOTICE : --- Running action sequence: setup_confdir
NOTICE:catalyst:--- Running action sequence: setup_confdir
09 Feb 2022 08:51:48 UTC: NOTICE : --- Running action sequence: process_repos
NOTICE:catalyst:--- Running action sequence: process_repos
09 Feb 2022 08:51:48 UTC: NOTICE : --- Running action sequence: bind
NOTICE:catalyst:--- Running action sequence: bind
09 Feb 2022 08:51:48 UTC: NOTICE : --- Running action sequence: chroot_setup
NOTICE:catalyst:--- Running action sequence: chroot_setup
09 Feb 2022 08:51:48 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
09 Feb 2022 08:51:48 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
09 Feb 2022 08:51:48 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
09 Feb 2022 08:51:48 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220209T015108Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220209T015108Z/etc/portage/make.conf
09 Feb 2022 08:51:48 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
09 Feb 2022 08:51:48 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
09 Feb 2022 08:51:48 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
09 Feb 2022 08:51:48 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220209T015108Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot sys-kernel/genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20211216
>>> Emerging binary (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 3) sys-kernel/linux-firmware-20211216::gentoo
>>> Installing (2 of 3) sys-kernel/linux-firmware-20211216::gentoo
>>> Emerging binary (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
* Messages for package sys-kernel/linux-firmware-20211216:
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-4.2.6-r2:
* Found the following problematic permissions:
*
* drwxrwxrwt /run
*
* Expected:
*
* drwxr-xr-x /run
*
* This is known to be causing problems for any UDEV-enabled service.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220209T015108Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --update gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging binary (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Emerging (2 of 2) sys-kernel/gentoo-sources-5.16.8::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-5.16.8::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.16.8:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.2.6^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20220209T015108Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20220209T015108Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20220209T015108Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20220209T015108Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20220209T015108Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.16.8-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.16.8-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.16.8-gentoo-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.16.8-gentoo-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.16.8-gentoo-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.16.8-gentoo-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending util-linux cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
^[[32;01m*^[[0m >> Appending devicemanager cpio data ...
^[[31;01m*^[[0m ERROR: Command 'nice -n10 make -j4 -l4.0 V=1' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_devicemanager(): populate_binpkg(): gkbuild(): Failed to create binpkg of lvm-2.02.188!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
09 Feb 2022 09:41:13 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
09 Feb 2022 09:41:13 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.8/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.8/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
Command exited with non-zero status 2
7395.30user 350.00system 49:48.54elapsed 259%CPU (0avgtext+0avgdata 324896maxresident)k
0inputs+0outputs (478major+31376070minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20220209T015108Z.Ruqmbk/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2022-02-02 7:34 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2022-02-02 7:34 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20220202T025014Z.91GsQM/specs/installcd-stage2-minimal.spec
02 Feb 2022 06:44:46 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
02 Feb 2022 06:44:46 UTC: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
02 Feb 2022 06:44:46 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20220202T025014Z.91GsQM/specs/installcd-stage2-minimal.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20220202T025014Z.91GsQM/specs/installcd-stage2-minimal.spec
02 Feb 2022 06:44:46 UTC: NOTICE : Using target: livecd-stage2
NOTICE:catalyst:Using target: livecd-stage2
02 Feb 2022 06:44:46 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
NOTICE:catalyst:Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
02 Feb 2022 06:44:46 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220202T025014Z/
NOTICE:catalyst:Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220202T025014Z/
02 Feb 2022 06:44:46 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
02 Feb 2022 06:44:46 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220202T025014Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220202T025014Z
02 Feb 2022 06:44:46 UTC: NOTICE : --- Running action sequence: unpack
NOTICE:catalyst:--- Running action sequence: unpack
02 Feb 2022 06:44:46 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
NOTICE:catalyst:Resume: Target chroot is invalid, cleaning up...
02 Feb 2022 06:44:46 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
02 Feb 2022 06:44:46 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220202T025014Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220202T025014Z
02 Feb 2022 06:44:46 UTC: NOTICE : Clearing the chroot path ...
NOTICE:catalyst:Clearing the chroot path ...
02 Feb 2022 06:44:46 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220202T025014Z/
NOTICE:catalyst:Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220202T025014Z/
02 Feb 2022 06:44:46 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20220202T025014Z (this may take some time) ..
NOTICE:catalyst:to /home/catalyst/tmp/default/livecd-stage2-ia64-20220202T025014Z (this may take some time) ..
02 Feb 2022 06:45:08 UTC: NOTICE : --- Running action sequence: config_profile_link
NOTICE:catalyst:--- Running action sequence: config_profile_link
02 Feb 2022 06:45:08 UTC: NOTICE : --- Running action sequence: setup_confdir
NOTICE:catalyst:--- Running action sequence: setup_confdir
02 Feb 2022 06:45:08 UTC: NOTICE : --- Running action sequence: process_repos
NOTICE:catalyst:--- Running action sequence: process_repos
02 Feb 2022 06:45:08 UTC: NOTICE : --- Running action sequence: bind
NOTICE:catalyst:--- Running action sequence: bind
02 Feb 2022 06:45:08 UTC: NOTICE : --- Running action sequence: chroot_setup
NOTICE:catalyst:--- Running action sequence: chroot_setup
02 Feb 2022 06:45:08 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
02 Feb 2022 06:45:08 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
02 Feb 2022 06:45:08 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
02 Feb 2022 06:45:08 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220202T025014Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220202T025014Z/etc/portage/make.conf
02 Feb 2022 06:45:08 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
02 Feb 2022 06:45:08 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
02 Feb 2022 06:45:08 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
02 Feb 2022 06:45:08 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220202T025014Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot sys-kernel/genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20211216
>>> Emerging binary (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 3) sys-kernel/linux-firmware-20211216::gentoo
>>> Installing (2 of 3) sys-kernel/linux-firmware-20211216::gentoo
>>> Emerging binary (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
* Messages for package sys-kernel/linux-firmware-20211216:
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-4.2.6-r2:
* Found the following problematic permissions:
*
* drwxrwxrwt /run
*
* Expected:
*
* drwxr-xr-x /run
*
* This is known to be causing problems for any UDEV-enabled service.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220202T025014Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --update gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging binary (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Emerging (2 of 2) sys-kernel/gentoo-sources-5.16.5::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-5.16.5::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.16.5:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.2.6^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20220202T025014Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20220202T025014Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20220202T025014Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20220202T025014Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20220202T025014Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.16.5-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.16.5-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.16.5-gentoo-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.16.5-gentoo-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.16.5-gentoo-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.16.5-gentoo-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending util-linux cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
^[[32;01m*^[[0m >> Appending devicemanager cpio data ...
^[[31;01m*^[[0m ERROR: Command 'nice -n10 make -j4 -l4.0 V=1' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_devicemanager(): populate_binpkg(): gkbuild(): Failed to create binpkg of lvm-2.02.188!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
02 Feb 2022 07:34:45 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
02 Feb 2022 07:34:45 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.8/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.8/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
Command exited with non-zero status 2
7413.05user 350.95system 50:00.65elapsed 258%CPU (0avgtext+0avgdata 324896maxresident)k
0inputs+0outputs (502major+31327631minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20220202T025014Z.91GsQM/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2022-01-26 11:29 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2022-01-26 11:29 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20220126T025156Z.z0eBj3/specs/installcd-stage2-minimal.spec
26 Jan 2022 10:43:34 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
26 Jan 2022 10:43:34 UTC: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
26 Jan 2022 10:43:34 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20220126T025156Z.z0eBj3/specs/installcd-stage2-minimal.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20220126T025156Z.z0eBj3/specs/installcd-stage2-minimal.spec
26 Jan 2022 10:43:34 UTC: NOTICE : Using target: livecd-stage2
NOTICE:catalyst:Using target: livecd-stage2
26 Jan 2022 10:43:34 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
NOTICE:catalyst:Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
26 Jan 2022 10:43:34 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220126T025156Z/
NOTICE:catalyst:Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220126T025156Z/
26 Jan 2022 10:43:34 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
26 Jan 2022 10:43:34 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220126T025156Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220126T025156Z
26 Jan 2022 10:43:34 UTC: NOTICE : --- Running action sequence: unpack
NOTICE:catalyst:--- Running action sequence: unpack
26 Jan 2022 10:43:34 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
NOTICE:catalyst:Resume: Target chroot is invalid, cleaning up...
26 Jan 2022 10:43:34 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
26 Jan 2022 10:43:34 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220126T025156Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220126T025156Z
26 Jan 2022 10:43:34 UTC: NOTICE : Clearing the chroot path ...
NOTICE:catalyst:Clearing the chroot path ...
26 Jan 2022 10:43:34 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220126T025156Z/
NOTICE:catalyst:Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220126T025156Z/
26 Jan 2022 10:43:34 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20220126T025156Z (this may take some time) ..
NOTICE:catalyst:to /home/catalyst/tmp/default/livecd-stage2-ia64-20220126T025156Z (this may take some time) ..
26 Jan 2022 10:43:52 UTC: NOTICE : --- Running action sequence: config_profile_link
NOTICE:catalyst:--- Running action sequence: config_profile_link
26 Jan 2022 10:43:52 UTC: NOTICE : --- Running action sequence: setup_confdir
NOTICE:catalyst:--- Running action sequence: setup_confdir
26 Jan 2022 10:43:53 UTC: NOTICE : --- Running action sequence: process_repos
NOTICE:catalyst:--- Running action sequence: process_repos
26 Jan 2022 10:43:53 UTC: NOTICE : --- Running action sequence: bind
NOTICE:catalyst:--- Running action sequence: bind
26 Jan 2022 10:43:53 UTC: NOTICE : --- Running action sequence: chroot_setup
NOTICE:catalyst:--- Running action sequence: chroot_setup
26 Jan 2022 10:43:53 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
26 Jan 2022 10:43:53 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
26 Jan 2022 10:43:53 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
26 Jan 2022 10:43:53 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220126T025156Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220126T025156Z/etc/portage/make.conf
26 Jan 2022 10:43:53 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
26 Jan 2022 10:43:53 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
26 Jan 2022 10:43:53 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
26 Jan 2022 10:43:53 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220126T025156Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot sys-kernel/genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20211216
>>> Emerging binary (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 3) sys-kernel/linux-firmware-20211216::gentoo
>>> Installing (2 of 3) sys-kernel/linux-firmware-20211216::gentoo
>>> Emerging binary (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
* Messages for package sys-kernel/linux-firmware-20211216:
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-4.2.6-r2:
* Found the following problematic permissions:
*
* drwxrwxrwt /run
*
* Expected:
*
* drwxr-xr-x /run
*
* This is known to be causing problems for any UDEV-enabled service.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220126T025156Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --update gentoo-sources
>>> Emerging binary (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Emerging binary (2 of 2) sys-kernel/gentoo-sources-5.16.2::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-5.16.2::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.16.2:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.2.6^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20220126T025156Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20220126T025156Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20220126T025156Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20220126T025156Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20220126T025156Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.16.2-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.16.2-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.16.2-gentoo-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.16.2-gentoo-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.16.2-gentoo-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.16.2-gentoo-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending util-linux cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
^[[32;01m*^[[0m >> Appending devicemanager cpio data ...
^[[31;01m*^[[0m ERROR: Command 'nice -n10 make -j4 -l4.0 V=1' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_devicemanager(): populate_binpkg(): gkbuild(): Failed to create binpkg of lvm-2.02.188!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
26 Jan 2022 11:29:54 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
26 Jan 2022 11:29:54 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.8/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.8/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
Command exited with non-zero status 2
7235.09user 317.64system 46:21.86elapsed 271%CPU (0avgtext+0avgdata 324896maxresident)k
0inputs+0outputs (498major+30213124minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20220126T025156Z.z0eBj3/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2022-01-24 23:33 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2022-01-24 23:33 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20220124T192145Z.lYmn4Y/specs/installcd-stage2-minimal.spec
24 Jan 2022 22:48:51 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
24 Jan 2022 22:48:51 UTC: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
24 Jan 2022 22:48:51 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20220124T192145Z.lYmn4Y/specs/installcd-stage2-minimal.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20220124T192145Z.lYmn4Y/specs/installcd-stage2-minimal.spec
24 Jan 2022 22:48:51 UTC: NOTICE : Using target: livecd-stage2
NOTICE:catalyst:Using target: livecd-stage2
24 Jan 2022 22:48:51 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
NOTICE:catalyst:Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
24 Jan 2022 22:48:51 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220124T192145Z/
NOTICE:catalyst:Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220124T192145Z/
24 Jan 2022 22:48:51 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
24 Jan 2022 22:48:51 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220124T192145Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220124T192145Z
24 Jan 2022 22:48:51 UTC: NOTICE : --- Running action sequence: unpack
NOTICE:catalyst:--- Running action sequence: unpack
24 Jan 2022 22:48:51 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
NOTICE:catalyst:Resume: Target chroot is invalid, cleaning up...
24 Jan 2022 22:48:51 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
24 Jan 2022 22:48:51 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220124T192145Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220124T192145Z
24 Jan 2022 22:48:51 UTC: NOTICE : Clearing the chroot path ...
NOTICE:catalyst:Clearing the chroot path ...
24 Jan 2022 22:48:51 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220124T192145Z/
NOTICE:catalyst:Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220124T192145Z/
24 Jan 2022 22:48:51 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20220124T192145Z (this may take some time) ..
NOTICE:catalyst:to /home/catalyst/tmp/default/livecd-stage2-ia64-20220124T192145Z (this may take some time) ..
24 Jan 2022 22:49:11 UTC: NOTICE : --- Running action sequence: config_profile_link
NOTICE:catalyst:--- Running action sequence: config_profile_link
24 Jan 2022 22:49:11 UTC: NOTICE : --- Running action sequence: setup_confdir
NOTICE:catalyst:--- Running action sequence: setup_confdir
24 Jan 2022 22:49:11 UTC: NOTICE : --- Running action sequence: process_repos
NOTICE:catalyst:--- Running action sequence: process_repos
24 Jan 2022 22:49:11 UTC: NOTICE : --- Running action sequence: bind
NOTICE:catalyst:--- Running action sequence: bind
24 Jan 2022 22:49:11 UTC: NOTICE : --- Running action sequence: chroot_setup
NOTICE:catalyst:--- Running action sequence: chroot_setup
24 Jan 2022 22:49:11 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
24 Jan 2022 22:49:11 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
24 Jan 2022 22:49:11 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
24 Jan 2022 22:49:11 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220124T192145Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220124T192145Z/etc/portage/make.conf
24 Jan 2022 22:49:11 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
24 Jan 2022 22:49:11 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
24 Jan 2022 22:49:11 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
24 Jan 2022 22:49:11 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220124T192145Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot sys-kernel/genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20211216
>>> Emerging binary (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 3) sys-kernel/linux-firmware-20211216::gentoo
>>> Installing (2 of 3) sys-kernel/linux-firmware-20211216::gentoo
>>> Emerging binary (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
* Messages for package sys-kernel/linux-firmware-20211216:
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-4.2.6-r2:
* Found the following problematic permissions:
*
* drwxrwxrwt /run
*
* Expected:
*
* drwxr-xr-x /run
*
* This is known to be causing problems for any UDEV-enabled service.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220124T192145Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --update gentoo-sources
>>> Emerging binary (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Emerging binary (2 of 2) sys-kernel/gentoo-sources-5.16.2::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-5.16.2::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.16.2:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.2.6^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20220124T192145Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20220124T192145Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20220124T192145Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20220124T192145Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20220124T192145Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.16.2-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.16.2-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.16.2-gentoo-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.16.2-gentoo-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.16.2-gentoo-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.16.2-gentoo-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending util-linux cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
^[[32;01m*^[[0m >> Appending devicemanager cpio data ...
^[[31;01m*^[[0m ERROR: Command 'nice -n10 make -j4 -l4.0 V=1' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_devicemanager(): populate_binpkg(): gkbuild(): Failed to create binpkg of lvm-2.02.188!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
24 Jan 2022 23:33:59 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
24 Jan 2022 23:33:59 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.8/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.8/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
Command exited with non-zero status 2
7225.03user 317.44system 45:09.70elapsed 278%CPU (0avgtext+0avgdata 324896maxresident)k
0inputs+0outputs (547major+30209463minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20220124T192145Z.lYmn4Y/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2022-01-23 8:35 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2022-01-23 8:35 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20220123T023640Z.JxXWr9/specs/installcd-stage2-minimal.spec
23 Jan 2022 07:49:48 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
23 Jan 2022 07:49:48 UTC: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
23 Jan 2022 07:49:48 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20220123T023640Z.JxXWr9/specs/installcd-stage2-minimal.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20220123T023640Z.JxXWr9/specs/installcd-stage2-minimal.spec
23 Jan 2022 07:49:48 UTC: NOTICE : Using target: livecd-stage2
NOTICE:catalyst:Using target: livecd-stage2
23 Jan 2022 07:49:48 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
NOTICE:catalyst:Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
23 Jan 2022 07:49:48 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220123T023640Z/
NOTICE:catalyst:Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220123T023640Z/
23 Jan 2022 07:49:48 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
23 Jan 2022 07:49:48 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220123T023640Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220123T023640Z
23 Jan 2022 07:49:48 UTC: NOTICE : --- Running action sequence: unpack
NOTICE:catalyst:--- Running action sequence: unpack
23 Jan 2022 07:49:48 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
NOTICE:catalyst:Resume: Target chroot is invalid, cleaning up...
23 Jan 2022 07:49:48 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
23 Jan 2022 07:49:48 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220123T023640Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220123T023640Z
23 Jan 2022 07:49:48 UTC: NOTICE : Clearing the chroot path ...
NOTICE:catalyst:Clearing the chroot path ...
23 Jan 2022 07:49:48 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220123T023640Z/
NOTICE:catalyst:Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220123T023640Z/
23 Jan 2022 07:49:48 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20220123T023640Z (this may take some time) ..
NOTICE:catalyst:to /home/catalyst/tmp/default/livecd-stage2-ia64-20220123T023640Z (this may take some time) ..
23 Jan 2022 07:50:08 UTC: NOTICE : --- Running action sequence: config_profile_link
NOTICE:catalyst:--- Running action sequence: config_profile_link
23 Jan 2022 07:50:08 UTC: NOTICE : --- Running action sequence: setup_confdir
NOTICE:catalyst:--- Running action sequence: setup_confdir
23 Jan 2022 07:50:08 UTC: NOTICE : --- Running action sequence: process_repos
NOTICE:catalyst:--- Running action sequence: process_repos
23 Jan 2022 07:50:08 UTC: NOTICE : --- Running action sequence: bind
NOTICE:catalyst:--- Running action sequence: bind
23 Jan 2022 07:50:08 UTC: NOTICE : --- Running action sequence: chroot_setup
NOTICE:catalyst:--- Running action sequence: chroot_setup
23 Jan 2022 07:50:08 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
23 Jan 2022 07:50:08 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
23 Jan 2022 07:50:08 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
23 Jan 2022 07:50:08 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220123T023640Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220123T023640Z/etc/portage/make.conf
23 Jan 2022 07:50:08 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
23 Jan 2022 07:50:08 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
23 Jan 2022 07:50:08 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
23 Jan 2022 07:50:08 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220123T023640Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot sys-kernel/genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20211216
>>> Emerging binary (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 3) sys-kernel/linux-firmware-20211216::gentoo
>>> Installing (2 of 3) sys-kernel/linux-firmware-20211216::gentoo
>>> Emerging binary (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
* Messages for package sys-kernel/linux-firmware-20211216:
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-4.2.6-r2:
* Found the following problematic permissions:
*
* drwxrwxrwt /run
*
* Expected:
*
* drwxr-xr-x /run
*
* This is known to be causing problems for any UDEV-enabled service.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220123T023640Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --update gentoo-sources
>>> Emerging binary (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Emerging binary (2 of 2) sys-kernel/gentoo-sources-5.16.2::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-5.16.2::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.16.2:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.2.6^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20220123T023640Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20220123T023640Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20220123T023640Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20220123T023640Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20220123T023640Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.16.2-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.16.2-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.16.2-gentoo-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.16.2-gentoo-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.16.2-gentoo-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.16.2-gentoo-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending util-linux cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
^[[32;01m*^[[0m >> Appending devicemanager cpio data ...
^[[31;01m*^[[0m ERROR: Command 'nice -n10 make -j4 -l4.0 V=1' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_devicemanager(): populate_binpkg(): gkbuild(): Failed to create binpkg of lvm-2.02.188!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
23 Jan 2022 08:35:55 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
23 Jan 2022 08:35:55 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.8/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.8/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
Command exited with non-zero status 2
7221.75user 318.33system 46:07.75elapsed 272%CPU (0avgtext+0avgdata 324896maxresident)k
0inputs+0outputs (596major+30204257minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20220123T023640Z.JxXWr9/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2022-01-22 23:28 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2022-01-22 23:28 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20220122T155140Z.8qVoiQ/specs/installcd-stage2-minimal.spec
22 Jan 2022 22:42:20 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
NOTICE:catalyst:Loading configuration file: /etc/catalyst/catalyst.conf
22 Jan 2022 22:42:20 UTC: NOTICE : conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
NOTICE:catalyst:conf_values[options] = ['autoresume', 'bindist', 'kerncache', 'pkgcache', 'seedcache', 'clear-autoresume']
22 Jan 2022 22:42:20 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20220122T155140Z.8qVoiQ/specs/installcd-stage2-minimal.spec
NOTICE:catalyst:Processing spec file: /tmp/catalyst-auto.20220122T155140Z.8qVoiQ/specs/installcd-stage2-minimal.spec
22 Jan 2022 22:42:20 UTC: NOTICE : Using target: livecd-stage2
NOTICE:catalyst:Using target: livecd-stage2
22 Jan 2022 22:42:20 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
NOTICE:catalyst:Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
22 Jan 2022 22:42:20 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220122T155140Z/
NOTICE:catalyst:Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20220122T155140Z/
22 Jan 2022 22:42:20 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
22 Jan 2022 22:42:20 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220122T155140Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220122T155140Z
22 Jan 2022 22:42:20 UTC: NOTICE : --- Running action sequence: unpack
NOTICE:catalyst:--- Running action sequence: unpack
22 Jan 2022 22:42:20 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
NOTICE:catalyst:Resume: Target chroot is invalid, cleaning up...
22 Jan 2022 22:42:20 UTC: NOTICE : Removing AutoResume Points ...
NOTICE:catalyst:Removing AutoResume Points ...
22 Jan 2022 22:42:20 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220122T155140Z
NOTICE:catalyst:Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20220122T155140Z
22 Jan 2022 22:42:20 UTC: NOTICE : Clearing the chroot path ...
NOTICE:catalyst:Clearing the chroot path ...
22 Jan 2022 22:42:20 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220122T155140Z/
NOTICE:catalyst:Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20220122T155140Z/
22 Jan 2022 22:42:20 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20220122T155140Z (this may take some time) ..
NOTICE:catalyst:to /home/catalyst/tmp/default/livecd-stage2-ia64-20220122T155140Z (this may take some time) ..
22 Jan 2022 22:42:40 UTC: NOTICE : --- Running action sequence: config_profile_link
NOTICE:catalyst:--- Running action sequence: config_profile_link
22 Jan 2022 22:42:40 UTC: NOTICE : --- Running action sequence: setup_confdir
NOTICE:catalyst:--- Running action sequence: setup_confdir
22 Jan 2022 22:42:40 UTC: NOTICE : --- Running action sequence: process_repos
NOTICE:catalyst:--- Running action sequence: process_repos
22 Jan 2022 22:42:40 UTC: NOTICE : --- Running action sequence: bind
NOTICE:catalyst:--- Running action sequence: bind
22 Jan 2022 22:42:40 UTC: NOTICE : --- Running action sequence: chroot_setup
NOTICE:catalyst:--- Running action sequence: chroot_setup
22 Jan 2022 22:42:40 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
22 Jan 2022 22:42:40 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
22 Jan 2022 22:42:40 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
22 Jan 2022 22:42:40 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220122T155140Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20220122T155140Z/etc/portage/make.conf
22 Jan 2022 22:42:40 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
22 Jan 2022 22:42:40 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
22 Jan 2022 22:42:40 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
22 Jan 2022 22:42:40 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220122T155140Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot sys-kernel/genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20211216
>>> Emerging binary (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 3) sys-kernel/linux-firmware-20211216::gentoo
>>> Installing (2 of 3) sys-kernel/linux-firmware-20211216::gentoo
>>> Emerging binary (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-4.2.6-r2::gentoo
* Messages for package sys-kernel/linux-firmware-20211216:
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-4.2.6-r2:
* Found the following problematic permissions:
*
* drwxrwxrwt /run
*
* Expected:
*
* drwxr-xr-x /run
*
* This is known to be causing problems for any UDEV-enabled service.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20220122T155140Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --jobs 4 --load-average 4.0 --usepkg --buildpkg --binpkg-respect-use=y --newuse --update gentoo-sources
>>> Emerging binary (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.07.1-r3::gentoo
>>> Emerging binary (2 of 2) sys-kernel/gentoo-sources-5.16.2::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-5.16.2::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.16.2:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.2.6^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20220122T155140Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20220122T155140Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20220122T155140Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20220122T155140Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20220122T155140Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.16.2-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.16.2-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.16.2-gentoo-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.16.2-gentoo-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.16.2-gentoo-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.16.2-gentoo-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending util-linux cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
^[[32;01m*^[[0m >> Appending devicemanager cpio data ...
^[[31;01m*^[[0m ERROR: Command 'nice -n10 make -j4 -l4.0 V=1' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_devicemanager(): populate_binpkg(): gkbuild(): Failed to create binpkg of lvm-2.02.188!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
22 Jan 2022 23:28:48 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
22 Jan 2022 23:28:48 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.8/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence
func()
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 1498, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.8/site-packages/catalyst/base/stagebase.py", line 1517, in _build_kernel
cmd([self.settings['controller_file'], 'kernel', kname],
File "/usr/lib/python3.8/site-packages/catalyst/support.py", line 66, in cmd
raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
Command exited with non-zero status 2
7232.24user 317.46system 46:29.30elapsed 270%CPU (0avgtext+0avgdata 324352maxresident)k
0inputs+0outputs (2080major+30199242minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20220122T155140Z.8qVoiQ/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-08-17 5:59 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-08-17 5:59 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
17 Aug 2020 05:17:35 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200817T023541Z (this may take some time) ..
17 Aug 2020 05:17:56 UTC: NOTICE : --- Running action sequence: config_profile_link
17 Aug 2020 05:17:56 UTC: NOTICE : --- Running action sequence: setup_confdir
17 Aug 2020 05:17:56 UTC: NOTICE : --- Running action sequence: portage_overlay
17 Aug 2020 05:17:56 UTC: NOTICE : --- Running action sequence: bind
17 Aug 2020 05:17:56 UTC: NOTICE : --- Running action sequence: chroot_setup
17 Aug 2020 05:17:56 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
17 Aug 2020 05:17:56 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
17 Aug 2020 05:17:56 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
17 Aug 2020 05:17:56 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200817T023541Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200817T023541Z/etc/portage/make.conf
17 Aug 2020 05:17:56 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
17 Aug 2020 05:17:57 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
17 Aug 2020 05:17:57 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
17 Aug 2020 05:17:57 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200817T023541Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20200721
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2019.01.06::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2019.01.06::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20200721::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20200721::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.1.0::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.1.0::gentoo
* Messages for package sys-kernel/linux-firmware-20200721:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20200721' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200817T023541Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
Genkernel version 4.1.0 found ... OK
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.07.1-r3::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.07.1-r3::gentoo
Pending updates for gentoo-sources, removing package.provided
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-5.8.1::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-5.8.1::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.8.1:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.1.0^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200817T023541Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200817T023541Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200817T023541Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200817T023541Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200817T023541Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.8.1-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.8.1-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.8.1-gentoo-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.8.1-gentoo-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.8.1-gentoo-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.8.1-gentoo-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
^[[32;01m*^[[0m >> Appending devicemanager cpio data ...
^[[31;01m*^[[0m ERROR: Command 'nice -n10 make -j4 V=1' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_devicemanager(): populate_binpkg(): gkbuild(): Failed to create binpkg of lvm-2.02.187!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
17 Aug 2020 05:59:48 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
17 Aug 2020 05:59:48 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1478, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in _build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1478, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in _build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
17 Aug 2020 05:59:48 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1478, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in _build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1352, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1484, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1478, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in _build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1352, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1484, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
17 Aug 2020 05:59:48 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
17 Aug 2020 05:59:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200817T023541Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200817T023541Z/tmp/kerncache is not a mount point. Skipping
17 Aug 2020 05:59:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200817T023541Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200817T023541Z/var/tmp/portage is not a mount point. Skipping
17 Aug 2020 05:59:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200817T023541Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200817T023541Z/var/cache/binpkgs is not a mount point. Skipping
17 Aug 2020 05:59:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200817T023541Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200817T023541Z/var/cache/distfiles is not a mount point. Skipping
17 Aug 2020 05:59:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200817T023541Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200817T023541Z/var/db/repos/gentoo is not a mount point. Skipping
17 Aug 2020 05:59:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200817T023541Z/run is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200817T023541Z/run is not a mount point. Skipping
17 Aug 2020 05:59:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200817T023541Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200817T023541Z/dev/shm does not exist. Skipping
17 Aug 2020 05:59:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200817T023541Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200817T023541Z/dev/pts does not exist. Skipping
17 Aug 2020 05:59:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200817T023541Z/dev is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200817T023541Z/dev is not a mount point. Skipping
17 Aug 2020 05:59:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200817T023541Z/proc is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200817T023541Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
5924.32user 296.19system 42:14.78elapsed 245%CPU (0avgtext+0avgdata 248096maxresident)k
0inputs+0outputs (520major+34046867minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200817T023541Z.DokgmU/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-08-16 5:46 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-08-16 5:46 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
16 Aug 2020 05:05:57 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200816T030547Z (this may take some time) ..
16 Aug 2020 05:06:18 UTC: NOTICE : --- Running action sequence: config_profile_link
16 Aug 2020 05:06:18 UTC: NOTICE : --- Running action sequence: setup_confdir
16 Aug 2020 05:06:18 UTC: NOTICE : --- Running action sequence: portage_overlay
16 Aug 2020 05:06:18 UTC: NOTICE : --- Running action sequence: bind
16 Aug 2020 05:06:18 UTC: NOTICE : --- Running action sequence: chroot_setup
16 Aug 2020 05:06:18 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
16 Aug 2020 05:06:18 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
16 Aug 2020 05:06:18 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
16 Aug 2020 05:06:18 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200816T030547Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200816T030547Z/etc/portage/make.conf
16 Aug 2020 05:06:18 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
16 Aug 2020 05:06:19 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
16 Aug 2020 05:06:19 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
16 Aug 2020 05:06:19 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200816T030547Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20200721
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2019.01.06::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2019.01.06::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20200721::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20200721::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.1.0::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.1.0::gentoo
* Messages for package sys-kernel/linux-firmware-20200721:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20200721' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200816T030547Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
Genkernel version 4.1.0 found ... OK
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.07.1-r3::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.07.1-r3::gentoo
Pending updates for gentoo-sources, removing package.provided
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-5.8.1::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-5.8.1::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.8.1:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.1.0^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200816T030547Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200816T030547Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200816T030547Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200816T030547Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200816T030547Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.8.1-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.8.1-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.8.1-gentoo-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.8.1-gentoo-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.8.1-gentoo-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.8.1-gentoo-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
^[[32;01m*^[[0m >> Appending devicemanager cpio data ...
^[[31;01m*^[[0m ERROR: Command 'nice -n10 make -j4 V=1' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_devicemanager(): populate_binpkg(): gkbuild(): Failed to create binpkg of lvm-2.02.187!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
16 Aug 2020 05:46:03 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
16 Aug 2020 05:46:03 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1478, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in _build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1478, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in _build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
16 Aug 2020 05:46:03 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1478, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in _build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1352, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1484, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1478, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in _build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1352, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1484, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
16 Aug 2020 05:46:03 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
16 Aug 2020 05:46:03 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200816T030547Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200816T030547Z/tmp/kerncache is not a mount point. Skipping
16 Aug 2020 05:46:03 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200816T030547Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200816T030547Z/var/tmp/portage is not a mount point. Skipping
16 Aug 2020 05:46:03 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200816T030547Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200816T030547Z/var/cache/binpkgs is not a mount point. Skipping
16 Aug 2020 05:46:03 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200816T030547Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200816T030547Z/var/cache/distfiles is not a mount point. Skipping
16 Aug 2020 05:46:03 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200816T030547Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200816T030547Z/var/db/repos/gentoo is not a mount point. Skipping
16 Aug 2020 05:46:03 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200816T030547Z/run is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200816T030547Z/run is not a mount point. Skipping
16 Aug 2020 05:46:03 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200816T030547Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200816T030547Z/dev/shm does not exist. Skipping
16 Aug 2020 05:46:03 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200816T030547Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200816T030547Z/dev/pts does not exist. Skipping
16 Aug 2020 05:46:03 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200816T030547Z/dev is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200816T030547Z/dev is not a mount point. Skipping
16 Aug 2020 05:46:03 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200816T030547Z/proc is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200816T030547Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
5923.52user 301.74system 40:07.56elapsed 258%CPU (0avgtext+0avgdata 248080maxresident)k
0inputs+0outputs (422major+34048679minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200816T030547Z.tG8dMr/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-08-15 8:25 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-08-15 8:25 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
15 Aug 2020 07:24:51 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200815T033547Z (this may take some time) ..
15 Aug 2020 07:25:13 UTC: NOTICE : --- Running action sequence: config_profile_link
15 Aug 2020 07:25:13 UTC: NOTICE : --- Running action sequence: setup_confdir
15 Aug 2020 07:25:13 UTC: NOTICE : --- Running action sequence: portage_overlay
15 Aug 2020 07:25:13 UTC: NOTICE : --- Running action sequence: bind
15 Aug 2020 07:25:13 UTC: NOTICE : --- Running action sequence: chroot_setup
15 Aug 2020 07:25:13 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
15 Aug 2020 07:25:13 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
15 Aug 2020 07:25:13 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
15 Aug 2020 07:25:13 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200815T033547Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200815T033547Z/etc/portage/make.conf
15 Aug 2020 07:25:13 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
15 Aug 2020 07:25:14 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
15 Aug 2020 07:25:14 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
15 Aug 2020 07:25:14 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200815T033547Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20200721
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2019.01.06::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2019.01.06::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20200721::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20200721::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.1.0::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.1.0::gentoo
* Messages for package sys-kernel/linux-firmware-20200721:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20200721' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200815T033547Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
Genkernel version 4.1.0 found ... OK
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.07.1-r3::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.07.1-r3::gentoo
Pending updates for gentoo-sources, removing package.provided
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-5.8.1::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-5.8.1::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.8.1:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.1.0^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200815T033547Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200815T033547Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200815T033547Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200815T033547Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200815T033547Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.8.1-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.8.1-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.8.1-gentoo-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.8.1-gentoo-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.8.1-gentoo-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.8.1-gentoo-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
^[[32;01m*^[[0m >> Appending devicemanager cpio data ...
^[[31;01m*^[[0m ERROR: Command 'nice -n10 make -j4 V=1' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_devicemanager(): populate_binpkg(): gkbuild(): Failed to create binpkg of lvm-2.02.187!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
15 Aug 2020 08:25:09 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
15 Aug 2020 08:25:09 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1478, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in _build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1478, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in _build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
15 Aug 2020 08:25:09 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1478, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in _build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1352, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1484, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1478, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in _build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1352, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1484, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
15 Aug 2020 08:25:09 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
15 Aug 2020 08:25:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200815T033547Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200815T033547Z/tmp/kerncache is not a mount point. Skipping
15 Aug 2020 08:25:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200815T033547Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200815T033547Z/var/tmp/portage is not a mount point. Skipping
15 Aug 2020 08:25:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200815T033547Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200815T033547Z/var/cache/binpkgs is not a mount point. Skipping
15 Aug 2020 08:25:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200815T033547Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200815T033547Z/var/cache/distfiles is not a mount point. Skipping
15 Aug 2020 08:25:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200815T033547Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200815T033547Z/var/db/repos/gentoo is not a mount point. Skipping
15 Aug 2020 08:25:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200815T033547Z/run is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200815T033547Z/run is not a mount point. Skipping
15 Aug 2020 08:25:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200815T033547Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200815T033547Z/dev/shm does not exist. Skipping
15 Aug 2020 08:25:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200815T033547Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200815T033547Z/dev/pts does not exist. Skipping
15 Aug 2020 08:25:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200815T033547Z/dev is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200815T033547Z/dev is not a mount point. Skipping
15 Aug 2020 08:25:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200815T033547Z/proc is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200815T033547Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
6010.74user 309.13system 1:00:18elapsed 174%CPU (0avgtext+0avgdata 248048maxresident)k
0inputs+0outputs (702major+34075232minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200815T033547Z.U0eHdR/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-08-14 6:17 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-08-14 6:17 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
14 Aug 2020 05:34:40 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200814T023544Z (this may take some time) ..
14 Aug 2020 05:35:09 UTC: NOTICE : --- Running action sequence: config_profile_link
14 Aug 2020 05:35:09 UTC: NOTICE : --- Running action sequence: setup_confdir
14 Aug 2020 05:35:09 UTC: NOTICE : --- Running action sequence: portage_overlay
14 Aug 2020 05:35:09 UTC: NOTICE : --- Running action sequence: bind
14 Aug 2020 05:35:10 UTC: NOTICE : --- Running action sequence: chroot_setup
14 Aug 2020 05:35:10 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
14 Aug 2020 05:35:10 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
14 Aug 2020 05:35:10 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
14 Aug 2020 05:35:10 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200814T023544Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200814T023544Z/etc/portage/make.conf
14 Aug 2020 05:35:10 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
14 Aug 2020 05:35:10 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
14 Aug 2020 05:35:10 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
14 Aug 2020 05:35:10 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200814T023544Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20200721
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2019.01.06::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2019.01.06::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20200721::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20200721::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.1.0::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.1.0::gentoo
* Messages for package sys-kernel/linux-firmware-20200721:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20200721' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200814T023544Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
Genkernel version 4.1.0 found ... OK
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.07.1-r3::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.07.1-r3::gentoo
Pending updates for gentoo-sources, removing package.provided
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-5.8.1::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-5.8.1::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.8.1:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.1.0^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200814T023544Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200814T023544Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200814T023544Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200814T023544Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200814T023544Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.8.1-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.8.1-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.8.1-gentoo-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.8.1-gentoo-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.8.1-gentoo-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.8.1-gentoo-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
^[[32;01m*^[[0m >> Appending devicemanager cpio data ...
^[[31;01m*^[[0m ERROR: Command 'nice -n10 make -j4 V=1' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_devicemanager(): populate_binpkg(): gkbuild(): Failed to create binpkg of lvm-2.02.187!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
14 Aug 2020 06:17:01 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
14 Aug 2020 06:17:02 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1478, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in _build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1478, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in _build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
14 Aug 2020 06:17:02 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1478, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in _build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1352, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1484, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1478, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in _build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1352, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1484, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
14 Aug 2020 06:17:02 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
14 Aug 2020 06:17:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200814T023544Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200814T023544Z/tmp/kerncache is not a mount point. Skipping
14 Aug 2020 06:17:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200814T023544Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200814T023544Z/var/tmp/portage is not a mount point. Skipping
14 Aug 2020 06:17:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200814T023544Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200814T023544Z/var/cache/binpkgs is not a mount point. Skipping
14 Aug 2020 06:17:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200814T023544Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200814T023544Z/var/cache/distfiles is not a mount point. Skipping
14 Aug 2020 06:17:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200814T023544Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200814T023544Z/var/db/repos/gentoo is not a mount point. Skipping
14 Aug 2020 06:17:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200814T023544Z/run is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200814T023544Z/run is not a mount point. Skipping
14 Aug 2020 06:17:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200814T023544Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200814T023544Z/dev/shm does not exist. Skipping
14 Aug 2020 06:17:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200814T023544Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200814T023544Z/dev/pts does not exist. Skipping
14 Aug 2020 06:17:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200814T023544Z/dev is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200814T023544Z/dev is not a mount point. Skipping
14 Aug 2020 06:17:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200814T023544Z/proc is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200814T023544Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
5912.36user 302.50system 42:22.44elapsed 244%CPU (0avgtext+0avgdata 248112maxresident)k
0inputs+0outputs (180major+34149475minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200814T023544Z.vQ1ro8/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-08-12 5:43 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-08-12 5:43 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
12 Aug 2020 05:02:26 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200812T023539Z (this may take some time) ..
12 Aug 2020 05:02:49 UTC: NOTICE : --- Running action sequence: config_profile_link
12 Aug 2020 05:02:49 UTC: NOTICE : --- Running action sequence: setup_confdir
12 Aug 2020 05:02:49 UTC: NOTICE : --- Running action sequence: portage_overlay
12 Aug 2020 05:02:49 UTC: NOTICE : --- Running action sequence: bind
12 Aug 2020 05:02:49 UTC: NOTICE : --- Running action sequence: chroot_setup
12 Aug 2020 05:02:49 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
12 Aug 2020 05:02:49 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
12 Aug 2020 05:02:49 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
12 Aug 2020 05:02:49 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200812T023539Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200812T023539Z/etc/portage/make.conf
12 Aug 2020 05:02:49 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
12 Aug 2020 05:02:49 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
12 Aug 2020 05:02:49 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
12 Aug 2020 05:02:49 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200812T023539Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20200721
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2019.01.06::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2019.01.06::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20200721::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20200721::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.1.0::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.1.0::gentoo
* Messages for package sys-kernel/linux-firmware-20200721:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20200721' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200812T023539Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
Genkernel version 4.1.0 found ... OK
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.07.1-r3::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.07.1-r3::gentoo
Pending updates for gentoo-sources, removing package.provided
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-5.8.0-r1::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-5.8.0-r1::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.8.0-r1:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.1.0^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200812T023539Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200812T023539Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200812T023539Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200812T023539Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200812T023539Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.8.0-gentoo-r1^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.8.0-gentoo-r1-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.8.0-gentoo-r1-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.8.0-gentoo-r1-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.8.0-gentoo-r1-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.8.0-gentoo-r1-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
^[[32;01m*^[[0m >> Appending devicemanager cpio data ...
^[[31;01m*^[[0m ERROR: Command 'nice -n10 make -j4 V=1' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_devicemanager(): populate_binpkg(): gkbuild(): Failed to create binpkg of lvm-2.02.187!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
12 Aug 2020 05:43:36 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
12 Aug 2020 05:43:36 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1478, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in _build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1478, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in _build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
12 Aug 2020 05:43:36 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1478, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in _build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1352, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1484, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1478, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in _build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1352, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1484, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
12 Aug 2020 05:43:36 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
12 Aug 2020 05:43:36 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200812T023539Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200812T023539Z/tmp/kerncache is not a mount point. Skipping
12 Aug 2020 05:43:36 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200812T023539Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200812T023539Z/var/tmp/portage is not a mount point. Skipping
12 Aug 2020 05:43:36 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200812T023539Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200812T023539Z/var/cache/binpkgs is not a mount point. Skipping
12 Aug 2020 05:43:36 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200812T023539Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200812T023539Z/var/cache/distfiles is not a mount point. Skipping
12 Aug 2020 05:43:36 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200812T023539Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200812T023539Z/var/db/repos/gentoo is not a mount point. Skipping
12 Aug 2020 05:43:36 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200812T023539Z/run is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200812T023539Z/run is not a mount point. Skipping
12 Aug 2020 05:43:36 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200812T023539Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200812T023539Z/dev/shm does not exist. Skipping
12 Aug 2020 05:43:36 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200812T023539Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200812T023539Z/dev/pts does not exist. Skipping
12 Aug 2020 05:43:36 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200812T023539Z/dev is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200812T023539Z/dev is not a mount point. Skipping
12 Aug 2020 05:43:36 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200812T023539Z/proc is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200812T023539Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
5908.56user 303.05system 41:10.93elapsed 251%CPU (0avgtext+0avgdata 248160maxresident)k
0inputs+0outputs (195major+34124411minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200812T023539Z.OkYgql/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-08-11 12:52 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-08-11 12:52 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
11 Aug 2020 12:10:35 UTC: NOTICE : --- Running action sequence: config_profile_link
11 Aug 2020 12:10:35 UTC: NOTICE : --- Running action sequence: setup_confdir
11 Aug 2020 12:10:35 UTC: NOTICE : --- Running action sequence: portage_overlay
11 Aug 2020 12:10:35 UTC: NOTICE : --- Running action sequence: bind
11 Aug 2020 12:10:35 UTC: NOTICE : --- Running action sequence: chroot_setup
11 Aug 2020 12:10:35 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
11 Aug 2020 12:10:35 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
11 Aug 2020 12:10:35 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
11 Aug 2020 12:10:35 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200811T003556Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200811T003556Z/etc/portage/make.conf
11 Aug 2020 12:10:35 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
11 Aug 2020 12:10:36 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
11 Aug 2020 12:10:36 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
11 Aug 2020 12:10:36 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200811T003556Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-kernel/linux-firmware-20200721
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2019.01.06::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2019.01.06::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20200721::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20200721::gentoo
>>> Emerging (4 of 4) sys-kernel/genkernel-4.1.0::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.1.0::gentoo
* Messages for package sys-kernel/linux-firmware-20200721:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20200721' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200811T003556Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
Genkernel version 4.1.0 found ... OK
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.07.1-r3::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.07.1-r3::gentoo
Pending updates for gentoo-sources, removing package.provided
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-5.8.0-r1::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-5.8.0-r1::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.8.0-r1:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.1.0^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200811T003556Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200811T003556Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200811T003556Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200811T003556Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200811T003556Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.8.0-gentoo-r1^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.8.0-gentoo-r1-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.8.0-gentoo-r1-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.8.0-gentoo-r1-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.8.0-gentoo-r1-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.8.0-gentoo-r1-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending eudev cpio data ...
^[[32;01m*^[[0m >> Appending devicemanager cpio data ...
^[[31;01m*^[[0m ERROR: Command 'nice -n10 make -j4 V=1' failed!
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_devicemanager(): populate_binpkg(): gkbuild(): Failed to create binpkg of lvm-2.02.187!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
11 Aug 2020 12:52:46 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
11 Aug 2020 12:52:47 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1478, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in _build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1478, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in _build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
11 Aug 2020 12:52:47 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1478, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in _build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1352, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1484, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1478, in build_kernel
self._build_kernel(kname=kname)
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1515, in _build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1352, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1484, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
11 Aug 2020 12:52:47 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
11 Aug 2020 12:52:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200811T003556Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200811T003556Z/tmp/kerncache is not a mount point. Skipping
11 Aug 2020 12:52:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200811T003556Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200811T003556Z/var/tmp/portage is not a mount point. Skipping
11 Aug 2020 12:52:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200811T003556Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200811T003556Z/var/cache/binpkgs is not a mount point. Skipping
11 Aug 2020 12:52:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200811T003556Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200811T003556Z/var/cache/distfiles is not a mount point. Skipping
11 Aug 2020 12:52:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200811T003556Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200811T003556Z/var/db/repos/gentoo is not a mount point. Skipping
11 Aug 2020 12:52:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200811T003556Z/run is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200811T003556Z/run is not a mount point. Skipping
11 Aug 2020 12:52:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200811T003556Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200811T003556Z/dev/shm does not exist. Skipping
11 Aug 2020 12:52:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200811T003556Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200811T003556Z/dev/pts does not exist. Skipping
11 Aug 2020 12:52:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200811T003556Z/dev is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200811T003556Z/dev is not a mount point. Skipping
11 Aug 2020 12:52:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200811T003556Z/proc is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200811T003556Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
5941.10user 319.36system 42:35.82elapsed 244%CPU (0avgtext+0avgdata 248160maxresident)k
0inputs+0outputs (176major+34413857minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200811T003556Z.OnRnKH/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-06-29 5:03 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-06-29 5:03 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20200629T013948Z.yeljrJ/specs/installcd-stage2-minimal.spec
29 Jun 2020 04:58:38 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
29 Jun 2020 04:58:38 UTC: NOTICE : conf_values[options] = {'autoresume', 'clear-autoresume', 'pkgcache', 'kerncache', 'bindist', 'seedcache'}
29 Jun 2020 04:58:38 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20200629T013948Z.yeljrJ/specs/installcd-stage2-minimal.spec
29 Jun 2020 04:58:39 UTC: NOTICE : Using target: livecd-stage2
29 Jun 2020 04:58:39 UTC: NOTICE : Source file specification matching setting is: strict
29 Jun 2020 04:58:39 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
29 Jun 2020 04:58:39 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20200629T013948Z/
29 Jun 2020 04:58:39 UTC: NOTICE : Removing AutoResume Points ...
29 Jun 2020 04:58:39 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200629T013948Z
29 Jun 2020 04:58:39 UTC: NOTICE : --- Running action sequence: unpack
29 Jun 2020 04:58:39 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
29 Jun 2020 04:58:39 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
29 Jun 2020 04:58:39 UTC: NOTICE : Removing AutoResume Points ...
29 Jun 2020 04:58:39 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200629T013948Z
29 Jun 2020 04:58:39 UTC: NOTICE : Clearing the chroot path ...
29 Jun 2020 04:58:39 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200629T013948Z
29 Jun 2020 04:58:39 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20200629T013948Z/
29 Jun 2020 04:58:39 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200629T013948Z (this may take some time) ..
29 Jun 2020 04:58:59 UTC: NOTICE : --- Running action sequence: config_profile_link
29 Jun 2020 04:58:59 UTC: NOTICE : --- Running action sequence: setup_confdir
29 Jun 2020 04:58:59 UTC: NOTICE : --- Running action sequence: portage_overlay
29 Jun 2020 04:58:59 UTC: NOTICE : --- Running action sequence: bind
29 Jun 2020 04:58:59 UTC: NOTICE : --- Running action sequence: chroot_setup
29 Jun 2020 04:58:59 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
29 Jun 2020 04:58:59 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
29 Jun 2020 04:58:59 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
29 Jun 2020 04:58:59 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200629T013948Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200629T013948Z/etc/portage/make.conf
29 Jun 2020 04:58:59 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
29 Jun 2020 04:58:59 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
29 Jun 2020 04:58:59 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
29 Jun 2020 04:58:59 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200629T013948Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-kernel/linux-firmware-20200619
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2019.01.06::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2019.01.06::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20200619::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20200619::gentoo
>>> Emerging (4 of 4) sys-kernel/genkernel-4.0.9::gentoo
>>> Failed to emerge sys-kernel/genkernel-4.0.9, Log file:
>>> '/var/tmp/portage/sys-kernel/genkernel-4.0.9/temp/build.log'
--2020-06-29 05:02:09-- http://distfiles.gentoo.org/distfiles/90/dropbear-2020.79.tar.bz2
Resolving distfiles.gentoo.org... 2600:3404:200:237::2, 2605:bc80:3010::134, 2600:3402:200:227::2, ...
Connecting to distfiles.gentoo.org|2600:3404:200:237::2|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2020-06-29 05:02:09 ERROR 404: Not Found.
--2020-06-29 05:02:09-- https://matt.ucc.asn.au/dropbear/releases/dropbear-2020.79.tar.bz2
Resolving matt.ucc.asn.au... 2405:3c00:5200:100::18, 130.95.13.18
Connecting to matt.ucc.asn.au|2405:3c00:5200:100::18|:443... connected.
Unable to establish SSL connection.
!!! Couldn't download 'dropbear-2020.79.tar.bz2'. Aborting.
* Fetch failed for 'sys-kernel/genkernel-4.0.9', Log file:
* '/var/tmp/portage/sys-kernel/genkernel-4.0.9/temp/build.log'
* Messages for package sys-kernel/linux-firmware-20200619:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20200619' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-4.0.9:
* Fetch failed for 'sys-kernel/genkernel-4.0.9', Log file:
* '/var/tmp/portage/sys-kernel/genkernel-4.0.9/temp/build.log'
29 Jun 2020 05:03:12 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
29 Jun 2020 05:03:12 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1476, in build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
ERROR:catalyst:CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1476, in build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
29 Jun 2020 05:03:12 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1476, in build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1352, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1484, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1476, in build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1352, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1484, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
29 Jun 2020 05:03:12 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
29 Jun 2020 05:03:12 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200629T013948Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200629T013948Z/tmp/kerncache is not a mount point. Skipping
29 Jun 2020 05:03:12 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200629T013948Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200629T013948Z/var/tmp/portage is not a mount point. Skipping
29 Jun 2020 05:03:12 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200629T013948Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200629T013948Z/var/cache/binpkgs is not a mount point. Skipping
29 Jun 2020 05:03:12 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200629T013948Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200629T013948Z/var/cache/distfiles is not a mount point. Skipping
29 Jun 2020 05:03:12 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200629T013948Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200629T013948Z/var/db/repos/gentoo is not a mount point. Skipping
29 Jun 2020 05:03:12 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200629T013948Z/run is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200629T013948Z/run is not a mount point. Skipping
29 Jun 2020 05:03:12 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200629T013948Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200629T013948Z/dev/shm does not exist. Skipping
29 Jun 2020 05:03:12 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200629T013948Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200629T013948Z/dev/pts does not exist. Skipping
29 Jun 2020 05:03:12 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200629T013948Z/dev is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200629T013948Z/dev is not a mount point. Skipping
29 Jun 2020 05:03:12 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200629T013948Z/proc is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200629T013948Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
80.31user 15.61system 4:34.90elapsed 34%CPU (0avgtext+0avgdata 67872maxresident)k
0inputs+0outputs (0major+508477minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200629T013948Z.yeljrJ/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-06-28 5:35 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-06-28 5:35 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20200628T030522Z.NUQCSS/specs/installcd-stage2-minimal.spec
28 Jun 2020 05:30:10 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
28 Jun 2020 05:30:10 UTC: NOTICE : conf_values[options] = {'bindist', 'clear-autoresume', 'pkgcache', 'kerncache', 'autoresume', 'seedcache'}
28 Jun 2020 05:30:10 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20200628T030522Z.NUQCSS/specs/installcd-stage2-minimal.spec
28 Jun 2020 05:30:10 UTC: NOTICE : Using target: livecd-stage2
28 Jun 2020 05:30:10 UTC: NOTICE : Source file specification matching setting is: strict
28 Jun 2020 05:30:10 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
28 Jun 2020 05:30:10 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20200628T030522Z/
28 Jun 2020 05:30:10 UTC: NOTICE : Removing AutoResume Points ...
28 Jun 2020 05:30:10 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200628T030522Z
28 Jun 2020 05:30:10 UTC: NOTICE : --- Running action sequence: unpack
28 Jun 2020 05:30:10 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
28 Jun 2020 05:30:10 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
28 Jun 2020 05:30:10 UTC: NOTICE : Removing AutoResume Points ...
28 Jun 2020 05:30:10 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200628T030522Z
28 Jun 2020 05:30:10 UTC: NOTICE : Clearing the chroot path ...
28 Jun 2020 05:30:10 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200628T030522Z
28 Jun 2020 05:30:10 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20200628T030522Z/
28 Jun 2020 05:30:10 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200628T030522Z (this may take some time) ..
28 Jun 2020 05:30:31 UTC: NOTICE : --- Running action sequence: config_profile_link
28 Jun 2020 05:30:31 UTC: NOTICE : --- Running action sequence: setup_confdir
28 Jun 2020 05:30:31 UTC: NOTICE : --- Running action sequence: portage_overlay
28 Jun 2020 05:30:31 UTC: NOTICE : --- Running action sequence: bind
28 Jun 2020 05:30:32 UTC: NOTICE : --- Running action sequence: chroot_setup
28 Jun 2020 05:30:32 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
28 Jun 2020 05:30:32 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
28 Jun 2020 05:30:32 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
28 Jun 2020 05:30:32 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200628T030522Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200628T030522Z/etc/portage/make.conf
28 Jun 2020 05:30:32 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
28 Jun 2020 05:30:32 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
28 Jun 2020 05:30:32 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
28 Jun 2020 05:30:32 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200628T030522Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-kernel/linux-firmware-20200619
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2019.01.06::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2019.01.06::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20200619::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20200619::gentoo
>>> Emerging (4 of 4) sys-kernel/genkernel-4.0.9::gentoo
>>> Failed to emerge sys-kernel/genkernel-4.0.9, Log file:
>>> '/var/tmp/portage/sys-kernel/genkernel-4.0.9/temp/build.log'
--2020-06-28 05:33:56-- http://distfiles.gentoo.org/distfiles/90/dropbear-2020.79.tar.bz2
Resolving distfiles.gentoo.org... 2600:3402:200:227::2, 2605:bc80:3010::134, 2600:3404:200:237::2, ...
Connecting to distfiles.gentoo.org|2600:3402:200:227::2|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2020-06-28 05:33:56 ERROR 404: Not Found.
--2020-06-28 05:33:56-- https://matt.ucc.asn.au/dropbear/releases/dropbear-2020.79.tar.bz2
Resolving matt.ucc.asn.au... 2405:3c00:5200:100::18, 130.95.13.18
Connecting to matt.ucc.asn.au|2405:3c00:5200:100::18|:443... connected.
Unable to establish SSL connection.
!!! Couldn't download 'dropbear-2020.79.tar.bz2'. Aborting.
* Fetch failed for 'sys-kernel/genkernel-4.0.9', Log file:
* '/var/tmp/portage/sys-kernel/genkernel-4.0.9/temp/build.log'
* Messages for package sys-kernel/linux-firmware-20200619:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20200619' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-4.0.9:
* Fetch failed for 'sys-kernel/genkernel-4.0.9', Log file:
* '/var/tmp/portage/sys-kernel/genkernel-4.0.9/temp/build.log'
28 Jun 2020 05:35:00 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
28 Jun 2020 05:35:00 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1476, in build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
ERROR:catalyst:CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1476, in build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
28 Jun 2020 05:35:00 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1476, in build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1352, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1484, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1476, in build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1352, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1484, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
28 Jun 2020 05:35:00 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
28 Jun 2020 05:35:00 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200628T030522Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200628T030522Z/tmp/kerncache is not a mount point. Skipping
28 Jun 2020 05:35:00 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200628T030522Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200628T030522Z/var/tmp/portage is not a mount point. Skipping
28 Jun 2020 05:35:00 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200628T030522Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200628T030522Z/var/cache/binpkgs is not a mount point. Skipping
28 Jun 2020 05:35:00 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200628T030522Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200628T030522Z/var/cache/distfiles is not a mount point. Skipping
28 Jun 2020 05:35:00 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200628T030522Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200628T030522Z/var/db/repos/gentoo is not a mount point. Skipping
28 Jun 2020 05:35:00 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200628T030522Z/run is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200628T030522Z/run is not a mount point. Skipping
28 Jun 2020 05:35:00 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200628T030522Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200628T030522Z/dev/shm does not exist. Skipping
28 Jun 2020 05:35:00 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200628T030522Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200628T030522Z/dev/pts does not exist. Skipping
28 Jun 2020 05:35:00 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200628T030522Z/dev is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200628T030522Z/dev is not a mount point. Skipping
28 Jun 2020 05:35:00 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200628T030522Z/proc is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200628T030522Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
76.56user 14.89system 4:51.05elapsed 31%CPU (0avgtext+0avgdata 68096maxresident)k
0inputs+0outputs (3major+509494minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200628T030522Z.NUQCSS/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-06-27 5:36 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-06-27 5:36 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20200627T020523Z.bPCDIU/specs/installcd-stage2-minimal.spec
27 Jun 2020 05:29:44 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
27 Jun 2020 05:29:44 UTC: NOTICE : conf_values[options] = {'seedcache', 'clear-autoresume', 'bindist', 'pkgcache', 'kerncache', 'autoresume'}
27 Jun 2020 05:29:44 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20200627T020523Z.bPCDIU/specs/installcd-stage2-minimal.spec
27 Jun 2020 05:29:44 UTC: NOTICE : Using target: livecd-stage2
27 Jun 2020 05:29:44 UTC: NOTICE : Source file specification matching setting is: strict
27 Jun 2020 05:29:44 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
27 Jun 2020 05:29:44 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20200627T020523Z/
27 Jun 2020 05:29:44 UTC: NOTICE : Removing AutoResume Points ...
27 Jun 2020 05:29:44 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200627T020523Z
27 Jun 2020 05:29:44 UTC: NOTICE : --- Running action sequence: unpack
27 Jun 2020 05:29:44 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
27 Jun 2020 05:29:44 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
27 Jun 2020 05:29:44 UTC: NOTICE : Removing AutoResume Points ...
27 Jun 2020 05:29:44 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200627T020523Z
27 Jun 2020 05:29:44 UTC: NOTICE : Clearing the chroot path ...
27 Jun 2020 05:29:44 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200627T020523Z
27 Jun 2020 05:29:44 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20200627T020523Z/
27 Jun 2020 05:29:44 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200627T020523Z (this may take some time) ..
27 Jun 2020 05:30:10 UTC: NOTICE : --- Running action sequence: config_profile_link
27 Jun 2020 05:30:10 UTC: NOTICE : --- Running action sequence: setup_confdir
27 Jun 2020 05:30:10 UTC: NOTICE : --- Running action sequence: portage_overlay
27 Jun 2020 05:30:10 UTC: NOTICE : --- Running action sequence: bind
27 Jun 2020 05:30:10 UTC: NOTICE : --- Running action sequence: chroot_setup
27 Jun 2020 05:30:10 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
27 Jun 2020 05:30:10 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
27 Jun 2020 05:30:10 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
27 Jun 2020 05:30:10 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200627T020523Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200627T020523Z/etc/portage/make.conf
27 Jun 2020 05:30:10 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
27 Jun 2020 05:30:10 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
27 Jun 2020 05:30:10 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
27 Jun 2020 05:30:10 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200627T020523Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-kernel/linux-firmware-20200619
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2019.01.06::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2019.01.06::gentoo
>>> Emerging (3 of 4) sys-kernel/linux-firmware-20200619::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20200619::gentoo
>>> Emerging (4 of 4) sys-kernel/genkernel-4.0.9::gentoo
>>> Failed to emerge sys-kernel/genkernel-4.0.9, Log file:
>>> '/var/tmp/portage/sys-kernel/genkernel-4.0.9/temp/build.log'
--2020-06-27 05:35:45-- http://distfiles.gentoo.org/distfiles/90/dropbear-2020.79.tar.bz2
Resolving distfiles.gentoo.org... 2605:bc80:3010::134, 2600:3404:200:237::2, 2600:3402:200:227::2, ...
Connecting to distfiles.gentoo.org|2605:bc80:3010::134|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2020-06-27 05:35:45 ERROR 404: Not Found.
--2020-06-27 05:35:45-- https://matt.ucc.asn.au/dropbear/releases/dropbear-2020.79.tar.bz2
Resolving matt.ucc.asn.au... 2405:3c00:5200:100::18, 130.95.13.18
Connecting to matt.ucc.asn.au|2405:3c00:5200:100::18|:443... connected.
Unable to establish SSL connection.
!!! Couldn't download 'dropbear-2020.79.tar.bz2'. Aborting.
* Fetch failed for 'sys-kernel/genkernel-4.0.9', Log file:
* '/var/tmp/portage/sys-kernel/genkernel-4.0.9/temp/build.log'
* Messages for package sys-kernel/linux-firmware-20200619:
* Building using saved configfile "/etc/portage/savedconfig/sys-kernel/linux-firmware"
* Your configuration for sys-kernel/linux-firmware-20200619 has been saved in
* "/etc/portage/savedconfig/sys-kernel/linux-firmware" for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20200619' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-4.0.9:
* Fetch failed for 'sys-kernel/genkernel-4.0.9', Log file:
* '/var/tmp/portage/sys-kernel/genkernel-4.0.9/temp/build.log'
27 Jun 2020 05:36:48 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
27 Jun 2020 05:36:48 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1476, in build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
ERROR:catalyst:CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1476, in build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
27 Jun 2020 05:36:48 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1476, in build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1352, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1484, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1476, in build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1352, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1484, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
27 Jun 2020 05:36:48 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
27 Jun 2020 05:36:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200627T020523Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200627T020523Z/tmp/kerncache is not a mount point. Skipping
27 Jun 2020 05:36:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200627T020523Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200627T020523Z/var/tmp/portage is not a mount point. Skipping
27 Jun 2020 05:36:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200627T020523Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200627T020523Z/var/cache/binpkgs is not a mount point. Skipping
27 Jun 2020 05:36:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200627T020523Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200627T020523Z/var/cache/distfiles is not a mount point. Skipping
27 Jun 2020 05:36:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200627T020523Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200627T020523Z/var/db/repos/gentoo is not a mount point. Skipping
27 Jun 2020 05:36:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200627T020523Z/run is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200627T020523Z/run is not a mount point. Skipping
27 Jun 2020 05:36:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200627T020523Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200627T020523Z/dev/shm does not exist. Skipping
27 Jun 2020 05:36:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200627T020523Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200627T020523Z/dev/pts does not exist. Skipping
27 Jun 2020 05:36:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200627T020523Z/dev is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200627T020523Z/dev is not a mount point. Skipping
27 Jun 2020 05:36:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200627T020523Z/proc is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200627T020523Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
145.90user 20.54system 7:05.32elapsed 39%CPU (0avgtext+0avgdata 67856maxresident)k
0inputs+0outputs (5major+741949minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200627T020523Z.bPCDIU/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-06-26 5:08 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-06-26 5:08 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20200626T010523Z.oIHsf8/specs/installcd-stage2-minimal.spec
26 Jun 2020 05:02:28 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
26 Jun 2020 05:02:28 UTC: NOTICE : conf_values[options] = {'kerncache', 'pkgcache', 'autoresume', 'clear-autoresume', 'seedcache', 'bindist'}
26 Jun 2020 05:02:28 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20200626T010523Z.oIHsf8/specs/installcd-stage2-minimal.spec
26 Jun 2020 05:02:28 UTC: NOTICE : Using target: livecd-stage2
26 Jun 2020 05:02:28 UTC: NOTICE : Source file specification matching setting is: strict
26 Jun 2020 05:02:28 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
26 Jun 2020 05:02:28 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20200626T010523Z/
26 Jun 2020 05:02:28 UTC: NOTICE : Removing AutoResume Points ...
26 Jun 2020 05:02:28 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200626T010523Z
26 Jun 2020 05:02:28 UTC: NOTICE : --- Running action sequence: unpack
26 Jun 2020 05:02:28 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
26 Jun 2020 05:02:28 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
26 Jun 2020 05:02:28 UTC: NOTICE : Removing AutoResume Points ...
26 Jun 2020 05:02:28 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200626T010523Z
26 Jun 2020 05:02:28 UTC: NOTICE : Clearing the chroot path ...
26 Jun 2020 05:02:28 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200626T010523Z
26 Jun 2020 05:02:28 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20200626T010523Z/
26 Jun 2020 05:02:28 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200626T010523Z (this may take some time) ..
26 Jun 2020 05:02:49 UTC: NOTICE : --- Running action sequence: config_profile_link
26 Jun 2020 05:02:49 UTC: NOTICE : --- Running action sequence: setup_confdir
26 Jun 2020 05:02:49 UTC: NOTICE : --- Running action sequence: portage_overlay
26 Jun 2020 05:02:49 UTC: NOTICE : --- Running action sequence: bind
26 Jun 2020 05:02:49 UTC: NOTICE : --- Running action sequence: chroot_setup
26 Jun 2020 05:02:49 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
26 Jun 2020 05:02:49 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
26 Jun 2020 05:02:49 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
26 Jun 2020 05:02:49 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200626T010523Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200626T010523Z/etc/portage/make.conf
26 Jun 2020 05:02:49 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
26 Jun 2020 05:02:50 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
26 Jun 2020 05:02:50 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
26 Jun 2020 05:02:50 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200626T010523Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-kernel/linux-firmware-20200519
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2019.01.06::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2019.01.06::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20200519::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20200519::gentoo
>>> Emerging (4 of 4) sys-kernel/genkernel-4.0.9::gentoo
>>> Failed to emerge sys-kernel/genkernel-4.0.9, Log file:
>>> '/var/tmp/portage/sys-kernel/genkernel-4.0.9/temp/build.log'
--2020-06-26 05:07:16-- http://distfiles.gentoo.org/distfiles/90/dropbear-2020.79.tar.bz2
Resolving distfiles.gentoo.org... 2600:3402:200:227::2, 2605:bc80:3010::134, 2600:3404:200:237::2, ...
Connecting to distfiles.gentoo.org|2600:3402:200:227::2|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2020-06-26 05:07:17 ERROR 404: Not Found.
--2020-06-26 05:07:17-- https://matt.ucc.asn.au/dropbear/releases/dropbear-2020.79.tar.bz2
Resolving matt.ucc.asn.au... 2405:3c00:5200:100::18, 130.95.13.18
Connecting to matt.ucc.asn.au|2405:3c00:5200:100::18|:443... connected.
Unable to establish SSL connection.
!!! Couldn't download 'dropbear-2020.79.tar.bz2'. Aborting.
* Fetch failed for 'sys-kernel/genkernel-4.0.9', Log file:
* '/var/tmp/portage/sys-kernel/genkernel-4.0.9/temp/build.log'
* Messages for package sys-kernel/linux-firmware-20200519:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20200519' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-4.0.9:
* Fetch failed for 'sys-kernel/genkernel-4.0.9', Log file:
* '/var/tmp/portage/sys-kernel/genkernel-4.0.9/temp/build.log'
26 Jun 2020 05:08:20 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
26 Jun 2020 05:08:20 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1476, in build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
ERROR:catalyst:CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1476, in build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
26 Jun 2020 05:08:20 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1476, in build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1352, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1484, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1476, in build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1352, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1484, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
26 Jun 2020 05:08:20 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
26 Jun 2020 05:08:20 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200626T010523Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200626T010523Z/tmp/kerncache is not a mount point. Skipping
26 Jun 2020 05:08:20 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200626T010523Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200626T010523Z/var/tmp/portage is not a mount point. Skipping
26 Jun 2020 05:08:20 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200626T010523Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200626T010523Z/var/cache/binpkgs is not a mount point. Skipping
26 Jun 2020 05:08:20 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200626T010523Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200626T010523Z/var/cache/distfiles is not a mount point. Skipping
26 Jun 2020 05:08:20 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200626T010523Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200626T010523Z/var/db/repos/gentoo is not a mount point. Skipping
26 Jun 2020 05:08:20 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200626T010523Z/run is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200626T010523Z/run is not a mount point. Skipping
26 Jun 2020 05:08:20 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200626T010523Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200626T010523Z/dev/shm does not exist. Skipping
26 Jun 2020 05:08:20 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200626T010523Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200626T010523Z/dev/pts does not exist. Skipping
26 Jun 2020 05:08:20 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200626T010523Z/dev is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200626T010523Z/dev is not a mount point. Skipping
26 Jun 2020 05:08:20 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200626T010523Z/proc is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200626T010523Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
74.51user 14.80system 5:53.42elapsed 25%CPU (0avgtext+0avgdata 67968maxresident)k
0inputs+0outputs (0major+520014minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200626T010523Z.oIHsf8/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-06-25 4:52 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-06-25 4:52 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20200625T010529Z.KhXm5c/specs/installcd-stage2-minimal.spec
25 Jun 2020 04:46:48 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
25 Jun 2020 04:46:48 UTC: NOTICE : conf_values[options] = {'bindist', 'seedcache', 'pkgcache', 'autoresume', 'kerncache', 'clear-autoresume'}
25 Jun 2020 04:46:48 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20200625T010529Z.KhXm5c/specs/installcd-stage2-minimal.spec
25 Jun 2020 04:46:48 UTC: NOTICE : Using target: livecd-stage2
25 Jun 2020 04:46:48 UTC: NOTICE : Source file specification matching setting is: strict
25 Jun 2020 04:46:48 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
25 Jun 2020 04:46:48 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20200625T010529Z/
25 Jun 2020 04:46:48 UTC: NOTICE : Removing AutoResume Points ...
25 Jun 2020 04:46:48 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200625T010529Z
25 Jun 2020 04:46:48 UTC: NOTICE : --- Running action sequence: unpack
25 Jun 2020 04:46:48 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
25 Jun 2020 04:46:48 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
25 Jun 2020 04:46:48 UTC: NOTICE : Removing AutoResume Points ...
25 Jun 2020 04:46:48 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200625T010529Z
25 Jun 2020 04:46:48 UTC: NOTICE : Clearing the chroot path ...
25 Jun 2020 04:46:48 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200625T010529Z
25 Jun 2020 04:46:48 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20200625T010529Z/
25 Jun 2020 04:46:48 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200625T010529Z (this may take some time) ..
25 Jun 2020 04:47:12 UTC: NOTICE : --- Running action sequence: config_profile_link
25 Jun 2020 04:47:12 UTC: NOTICE : --- Running action sequence: setup_confdir
25 Jun 2020 04:47:12 UTC: NOTICE : --- Running action sequence: portage_overlay
25 Jun 2020 04:47:12 UTC: NOTICE : --- Running action sequence: bind
25 Jun 2020 04:47:12 UTC: NOTICE : --- Running action sequence: chroot_setup
25 Jun 2020 04:47:12 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
25 Jun 2020 04:47:12 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
25 Jun 2020 04:47:12 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
25 Jun 2020 04:47:12 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200625T010529Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200625T010529Z/etc/portage/make.conf
25 Jun 2020 04:47:12 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
25 Jun 2020 04:47:12 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
25 Jun 2020 04:47:12 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
25 Jun 2020 04:47:12 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200625T010529Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-kernel/linux-firmware-20200519
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2019.01.06::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2019.01.06::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20200519::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20200519::gentoo
>>> Emerging (4 of 4) sys-kernel/genkernel-4.0.9::gentoo
>>> Failed to emerge sys-kernel/genkernel-4.0.9, Log file:
>>> '/var/tmp/portage/sys-kernel/genkernel-4.0.9/temp/build.log'
--2020-06-25 04:51:00-- http://distfiles.gentoo.org/distfiles/90/dropbear-2020.79.tar.bz2
Resolving distfiles.gentoo.org... 2605:bc80:3010::134, 2600:3404:200:237::2, 2600:3402:200:227::2, ...
Connecting to distfiles.gentoo.org|2605:bc80:3010::134|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2020-06-25 04:51:00 ERROR 404: Not Found.
--2020-06-25 04:51:00-- https://matt.ucc.asn.au/dropbear/releases/dropbear-2020.79.tar.bz2
Resolving matt.ucc.asn.au... 2405:3c00:5200:100::18, 130.95.13.18
Connecting to matt.ucc.asn.au|2405:3c00:5200:100::18|:443... connected.
Unable to establish SSL connection.
!!! Couldn't download 'dropbear-2020.79.tar.bz2'. Aborting.
* Fetch failed for 'sys-kernel/genkernel-4.0.9', Log file:
* '/var/tmp/portage/sys-kernel/genkernel-4.0.9/temp/build.log'
* Messages for package sys-kernel/linux-firmware-20200519:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20200519' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-4.0.9:
* Fetch failed for 'sys-kernel/genkernel-4.0.9', Log file:
* '/var/tmp/portage/sys-kernel/genkernel-4.0.9/temp/build.log'
25 Jun 2020 04:52:03 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
25 Jun 2020 04:52:03 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1476, in build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
ERROR:catalyst:CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1476, in build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
25 Jun 2020 04:52:03 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1476, in build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1352, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1484, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1476, in build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1352, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1484, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
25 Jun 2020 04:52:03 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
25 Jun 2020 04:52:03 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200625T010529Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200625T010529Z/tmp/kerncache is not a mount point. Skipping
25 Jun 2020 04:52:03 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200625T010529Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200625T010529Z/var/tmp/portage is not a mount point. Skipping
25 Jun 2020 04:52:03 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200625T010529Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200625T010529Z/var/cache/binpkgs is not a mount point. Skipping
25 Jun 2020 04:52:03 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200625T010529Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200625T010529Z/var/cache/distfiles is not a mount point. Skipping
25 Jun 2020 04:52:03 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200625T010529Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200625T010529Z/var/db/repos/gentoo is not a mount point. Skipping
25 Jun 2020 04:52:03 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200625T010529Z/run is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200625T010529Z/run is not a mount point. Skipping
25 Jun 2020 04:52:03 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200625T010529Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200625T010529Z/dev/shm does not exist. Skipping
25 Jun 2020 04:52:03 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200625T010529Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200625T010529Z/dev/pts does not exist. Skipping
25 Jun 2020 04:52:03 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200625T010529Z/dev is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200625T010529Z/dev is not a mount point. Skipping
25 Jun 2020 04:52:03 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200625T010529Z/proc is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200625T010529Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
79.06user 15.18system 5:16.21elapsed 29%CPU (0avgtext+0avgdata 67968maxresident)k
0inputs+0outputs (0major+509848minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200625T010529Z.KhXm5c/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-06-24 5:48 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-06-24 5:48 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20200624T010525Z.HKPHye/specs/installcd-stage2-minimal.spec
24 Jun 2020 05:43:03 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
24 Jun 2020 05:43:03 UTC: NOTICE : conf_values[options] = {'bindist', 'seedcache', 'kerncache', 'autoresume', 'pkgcache', 'clear-autoresume'}
24 Jun 2020 05:43:03 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20200624T010525Z.HKPHye/specs/installcd-stage2-minimal.spec
24 Jun 2020 05:43:03 UTC: NOTICE : Using target: livecd-stage2
24 Jun 2020 05:43:03 UTC: NOTICE : Source file specification matching setting is: strict
24 Jun 2020 05:43:03 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
24 Jun 2020 05:43:03 UTC: NOTICE : Source path set to /home/catalyst/tmp/default/livecd-stage1-ia64-20200624T010525Z/
24 Jun 2020 05:43:03 UTC: NOTICE : Removing AutoResume Points ...
24 Jun 2020 05:43:03 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200624T010525Z
24 Jun 2020 05:43:03 UTC: NOTICE : --- Running action sequence: unpack
24 Jun 2020 05:43:03 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
24 Jun 2020 05:43:03 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
24 Jun 2020 05:43:03 UTC: NOTICE : Removing AutoResume Points ...
24 Jun 2020 05:43:03 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200624T010525Z
24 Jun 2020 05:43:03 UTC: NOTICE : Clearing the chroot path ...
24 Jun 2020 05:43:03 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200624T010525Z
24 Jun 2020 05:43:03 UTC: NOTICE : Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20200624T010525Z/
24 Jun 2020 05:43:03 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200624T010525Z (this may take some time) ..
24 Jun 2020 05:43:28 UTC: NOTICE : --- Running action sequence: config_profile_link
24 Jun 2020 05:43:28 UTC: NOTICE : --- Running action sequence: setup_confdir
24 Jun 2020 05:43:28 UTC: NOTICE : --- Running action sequence: portage_overlay
24 Jun 2020 05:43:28 UTC: NOTICE : --- Running action sequence: bind
24 Jun 2020 05:43:28 UTC: NOTICE : --- Running action sequence: chroot_setup
24 Jun 2020 05:43:28 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
24 Jun 2020 05:43:28 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
24 Jun 2020 05:43:28 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
24 Jun 2020 05:43:28 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200624T010525Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200624T010525Z/etc/portage/make.conf
24 Jun 2020 05:43:28 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
24 Jun 2020 05:43:28 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
24 Jun 2020 05:43:28 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
24 Jun 2020 05:43:28 UTC: NOTICE : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200624T010525Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-kernel/linux-firmware-20200519
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2019.01.06::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2019.01.06::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20200519::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20200519::gentoo
>>> Emerging (4 of 4) sys-kernel/genkernel-4.0.9::gentoo
>>> Failed to emerge sys-kernel/genkernel-4.0.9, Log file:
>>> '/var/tmp/portage/sys-kernel/genkernel-4.0.9/temp/build.log'
--2020-06-24 05:47:40-- http://distfiles.gentoo.org/distfiles/90/dropbear-2020.79.tar.bz2
Resolving distfiles.gentoo.org... 2605:bc80:3010::134, 2600:3402:200:227::2, 2600:3404:200:237::2, ...
Connecting to distfiles.gentoo.org|2605:bc80:3010::134|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2020-06-24 05:47:40 ERROR 404: Not Found.
--2020-06-24 05:47:40-- https://matt.ucc.asn.au/dropbear/releases/dropbear-2020.79.tar.bz2
Resolving matt.ucc.asn.au... 2405:3c00:5200:100::18, 130.95.13.18
Connecting to matt.ucc.asn.au|2405:3c00:5200:100::18|:443... connected.
Unable to establish SSL connection.
!!! Couldn't download 'dropbear-2020.79.tar.bz2'. Aborting.
* Fetch failed for 'sys-kernel/genkernel-4.0.9', Log file:
* '/var/tmp/portage/sys-kernel/genkernel-4.0.9/temp/build.log'
* Messages for package sys-kernel/linux-firmware-20200519:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20200519' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-4.0.9:
* Fetch failed for 'sys-kernel/genkernel-4.0.9', Log file:
* '/var/tmp/portage/sys-kernel/genkernel-4.0.9/temp/build.log'
24 Jun 2020 05:48:43 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
24 Jun 2020 05:48:43 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1476, in build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
ERROR:catalyst:CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1476, in build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
24 Jun 2020 05:48:43 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1476, in build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1352, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1484, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1476, in build_kernel
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'pre-kmerge']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1352, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1484, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
24 Jun 2020 05:48:43 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
24 Jun 2020 05:48:43 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200624T010525Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200624T010525Z/tmp/kerncache is not a mount point. Skipping
24 Jun 2020 05:48:43 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200624T010525Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200624T010525Z/var/tmp/portage is not a mount point. Skipping
24 Jun 2020 05:48:43 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200624T010525Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200624T010525Z/var/cache/binpkgs is not a mount point. Skipping
24 Jun 2020 05:48:43 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200624T010525Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200624T010525Z/var/cache/distfiles is not a mount point. Skipping
24 Jun 2020 05:48:43 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200624T010525Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200624T010525Z/var/db/repos/gentoo is not a mount point. Skipping
24 Jun 2020 05:48:43 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200624T010525Z/run is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200624T010525Z/run is not a mount point. Skipping
24 Jun 2020 05:48:43 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200624T010525Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200624T010525Z/dev/shm does not exist. Skipping
24 Jun 2020 05:48:43 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200624T010525Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200624T010525Z/dev/pts does not exist. Skipping
24 Jun 2020 05:48:43 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200624T010525Z/dev is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200624T010525Z/dev is not a mount point. Skipping
24 Jun 2020 05:48:43 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200624T010525Z/proc is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200624T010525Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
77.05user 16.52system 5:41.05elapsed 27%CPU (0avgtext+0avgdata 67952maxresident)k
0inputs+0outputs (0major+515050minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200624T010525Z.HKPHye/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-05-18 6:14 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-05-18 6:14 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
F: open_wr
S: deny
P: /usr/lib/python3.7/__pycache__/_sysconfigdata_m_linux_ia64-linux-gnu.cpython-37.pyc.2305843009230165600
A: /usr/lib/python3.7/__pycache__/_sysconfigdata_m_linux_ia64-linux-gnu.cpython-37.pyc.2305843009230165600
R: /usr/lib/python3.7/__pycache__/_sysconfigdata_m_linux_ia64-linux-gnu.cpython-37.pyc.2305843009230165600
C: /usr/lib/python-exec/python3.7/python -c
import sys
# Prefer sysconfig over distutils.sysconfig, for better compatibility
# with python 3.x. See automake bug#10227.
try:
import sysconfig
except ImportError:
can_use_sysconfig = 0
else:
can_use_sysconfig = 1
# Can't use sysconfig in CPython 2.7, since it's broken in virtualenvs:
# <https://github.com/pypa/virtualenv/issues/118>
try:
from platform import python_implementation
if python_implementation() == 'CPython' and sys.version[:3] == '2.7':
can_use_sysconfig = 0
except ImportError:
pass
if can_use_sysconfig:
sitedir = sysconfig.get_path('platlib', vars={'platbase':'/usr'})
else:
from distutils import sysconfig
sitedir = sysconfig.get_python_lib(1, 0, prefix='/usr')
sys.stdout.write(sitedir)
essages for package sys-kernel/linux-firmware-20200421:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20200421' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200518T035106Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
Genkernel version 4.0.7 found ... OK
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.07.1-r3::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.07.1-r3::gentoo
Pending updates for gentoo-sources, removing package.provided
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-5.6.13::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-5.6.13::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.6.13:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.7^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200518T035106Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200518T035106Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200518T035106Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200518T035106Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200518T035106Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.6.13-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.6.13-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.6.13-gentoo-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.6.13-gentoo-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.6.13-gentoo-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.6.13-gentoo-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending auxilary cpio data ...
^[[32;01m*^[[0m >> Appending busybox cpio data ...
^[[32;01m*^[[0m >> Appending blkid cpio data ...
^[[31;01m*^[[0m ^[[31;01mACCESS DENIED^[[0m: open_wr: /usr/lib/python3.7/__pycache__/sysconfig.cpython-37.pyc.2305843009227963840
^[[31;01m*^[[0m ^[[31;01mACCESS DENIED^[[0m: open_wr: /usr/lib/python3.7/__pycache__/_sysconfigdata_m_linux_ia64-linux-gnu.cpython-37.pyc.2305843009230165600
^[[31;01m*^[[0m ^[[31;01mACCESS DENIED^[[0m: open_wr: /usr/lib/python3.7/__pycache__/sysconfig.cpython-37.pyc.2305843009227963840
^[[31;01m*^[[0m ^[[31;01mACCESS DENIED^[[0m: open_wr: /usr/lib/python3.7/__pycache__/_sysconfigdata_m_linux_ia64-linux-gnu.cpython-37.pyc.2305843009230165600
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_blkid(): populate_binpkg(): gkbuild(): Failed to create binpkg of util-linux-2.35.1!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
18 May 2020 06:14:18 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
18 May 2020 06:14:18 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200518T035106Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200518T035106Z/var/tmp/portage is not a mount point. Skipping
18 May 2020 06:14:18 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1594, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1631, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1594, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1631, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
18 May 2020 06:14:18 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1594, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1631, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1474, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1600, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1594, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1631, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1474, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1600, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
18 May 2020 06:14:18 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
18 May 2020 06:14:18 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200518T035106Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200518T035106Z/tmp/kerncache is not a mount point. Skipping
18 May 2020 06:14:18 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200518T035106Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200518T035106Z/var/cache/binpkgs is not a mount point. Skipping
18 May 2020 06:14:18 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200518T035106Z/run is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200518T035106Z/run is not a mount point. Skipping
18 May 2020 06:14:18 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200518T035106Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200518T035106Z/dev/shm does not exist. Skipping
18 May 2020 06:14:18 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200518T035106Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200518T035106Z/dev/pts does not exist. Skipping
18 May 2020 06:14:18 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200518T035106Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200518T035106Z/var/tmp/portage is not a mount point. Skipping
18 May 2020 06:14:18 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200518T035106Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200518T035106Z/var/cache/distfiles is not a mount point. Skipping
18 May 2020 06:14:18 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200518T035106Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200518T035106Z/var/db/repos/gentoo is not a mount point. Skipping
18 May 2020 06:14:18 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200518T035106Z/dev is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200518T035106Z/dev is not a mount point. Skipping
18 May 2020 06:14:18 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200518T035106Z/proc is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200518T035106Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
5390.62user 289.14system 33:51.32elapsed 279%CPU (0avgtext+0avgdata 241472maxresident)k
0inputs+0outputs (0major+32093018minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200518T035106Z.ZPA01C/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-05-17 5:50 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-05-17 5:50 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
F: open_wr
S: deny
P: /usr/lib/python3.7/__pycache__/_sysconfigdata_m_linux_ia64-linux-gnu.cpython-37.pyc.2305843009230165600
A: /usr/lib/python3.7/__pycache__/_sysconfigdata_m_linux_ia64-linux-gnu.cpython-37.pyc.2305843009230165600
R: /usr/lib/python3.7/__pycache__/_sysconfigdata_m_linux_ia64-linux-gnu.cpython-37.pyc.2305843009230165600
C: /usr/lib/python-exec/python3.7/python -c
import sys
# Prefer sysconfig over distutils.sysconfig, for better compatibility
# with python 3.x. See automake bug#10227.
try:
import sysconfig
except ImportError:
can_use_sysconfig = 0
else:
can_use_sysconfig = 1
# Can't use sysconfig in CPython 2.7, since it's broken in virtualenvs:
# <https://github.com/pypa/virtualenv/issues/118>
try:
from platform import python_implementation
if python_implementation() == 'CPython' and sys.version[:3] == '2.7':
can_use_sysconfig = 0
except ImportError:
pass
if can_use_sysconfig:
sitedir = sysconfig.get_path('platlib', vars={'platbase':'/usr'})
else:
from distutils import sysconfig
sitedir = sysconfig.get_python_lib(1, 0, prefix='/usr')
sys.stdout.write(sitedir)
essages for package sys-kernel/linux-firmware-20200421:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20200421' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200517T033010Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
Genkernel version 4.0.7 found ... OK
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.07.1-r3::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.07.1-r3::gentoo
Pending updates for gentoo-sources, removing package.provided
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-5.6.13::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-5.6.13::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.6.13:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.7^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200517T033010Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200517T033010Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200517T033010Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200517T033010Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200517T033010Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.6.13-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.6.13-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.6.13-gentoo-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.6.13-gentoo-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.6.13-gentoo-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.6.13-gentoo-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending auxilary cpio data ...
^[[32;01m*^[[0m >> Appending busybox cpio data ...
^[[32;01m*^[[0m >> Appending blkid cpio data ...
^[[31;01m*^[[0m ^[[31;01mACCESS DENIED^[[0m: open_wr: /usr/lib/python3.7/__pycache__/sysconfig.cpython-37.pyc.2305843009227963840
^[[31;01m*^[[0m ^[[31;01mACCESS DENIED^[[0m: open_wr: /usr/lib/python3.7/__pycache__/_sysconfigdata_m_linux_ia64-linux-gnu.cpython-37.pyc.2305843009230165600
^[[31;01m*^[[0m ^[[31;01mACCESS DENIED^[[0m: open_wr: /usr/lib/python3.7/__pycache__/sysconfig.cpython-37.pyc.2305843009227963840
^[[31;01m*^[[0m ^[[31;01mACCESS DENIED^[[0m: open_wr: /usr/lib/python3.7/__pycache__/_sysconfigdata_m_linux_ia64-linux-gnu.cpython-37.pyc.2305843009230165600
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_blkid(): populate_binpkg(): gkbuild(): Failed to create binpkg of util-linux-2.35.1!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
17 May 2020 05:50:51 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
17 May 2020 05:50:51 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200517T033010Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200517T033010Z/var/tmp/portage is not a mount point. Skipping
17 May 2020 05:50:51 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1594, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1631, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1594, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1631, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
17 May 2020 05:50:51 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1594, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1631, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1474, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1600, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1594, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1631, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1474, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1600, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
17 May 2020 05:50:51 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
17 May 2020 05:50:51 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200517T033010Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200517T033010Z/tmp/kerncache is not a mount point. Skipping
17 May 2020 05:50:51 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200517T033010Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200517T033010Z/var/cache/binpkgs is not a mount point. Skipping
17 May 2020 05:50:51 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200517T033010Z/run is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200517T033010Z/run is not a mount point. Skipping
17 May 2020 05:50:51 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200517T033010Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200517T033010Z/dev/shm does not exist. Skipping
17 May 2020 05:50:51 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200517T033010Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200517T033010Z/dev/pts does not exist. Skipping
17 May 2020 05:50:51 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200517T033010Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200517T033010Z/var/tmp/portage is not a mount point. Skipping
17 May 2020 05:50:51 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200517T033010Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200517T033010Z/var/cache/distfiles is not a mount point. Skipping
17 May 2020 05:50:51 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200517T033010Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200517T033010Z/var/db/repos/gentoo is not a mount point. Skipping
17 May 2020 05:50:51 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200517T033010Z/dev is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200517T033010Z/dev is not a mount point. Skipping
17 May 2020 05:50:51 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200517T033010Z/proc is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200517T033010Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
5388.22user 291.47system 33:56.41elapsed 278%CPU (0avgtext+0avgdata 241472maxresident)k
0inputs+0outputs (0major+32099423minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200517T033010Z.oxBZzh/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-05-16 7:39 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-05-16 7:39 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
F: open_wr
S: deny
P: /usr/lib/python3.7/__pycache__/_sysconfigdata_m_linux_ia64-linux-gnu.cpython-37.pyc.2305843009230165600
A: /usr/lib/python3.7/__pycache__/_sysconfigdata_m_linux_ia64-linux-gnu.cpython-37.pyc.2305843009230165600
R: /usr/lib/python3.7/__pycache__/_sysconfigdata_m_linux_ia64-linux-gnu.cpython-37.pyc.2305843009230165600
C: /usr/lib/python-exec/python3.7/python -c
import sys
# Prefer sysconfig over distutils.sysconfig, for better compatibility
# with python 3.x. See automake bug#10227.
try:
import sysconfig
except ImportError:
can_use_sysconfig = 0
else:
can_use_sysconfig = 1
# Can't use sysconfig in CPython 2.7, since it's broken in virtualenvs:
# <https://github.com/pypa/virtualenv/issues/118>
try:
from platform import python_implementation
if python_implementation() == 'CPython' and sys.version[:3] == '2.7':
can_use_sysconfig = 0
except ImportError:
pass
if can_use_sysconfig:
sitedir = sysconfig.get_path('platlib', vars={'platbase':'/usr'})
else:
from distutils import sysconfig
sitedir = sysconfig.get_python_lib(1, 0, prefix='/usr')
sys.stdout.write(sitedir)
essages for package sys-kernel/linux-firmware-20200421:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20200421' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200516T031607Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
Genkernel version 4.0.7 found ... OK
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --update --newuse --onlydeps gentoo-sources
>>> Emerging binary (1 of 1) sys-devel/bc-1.07.1-r3::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.07.1-r3::gentoo
Pending updates for gentoo-sources, removing package.provided
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-5.6.13::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-5.6.13::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-5.6.13:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.7^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200516T031607Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200516T031607Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200516T031607Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200516T031607Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200516T031607Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m5.6.13-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m5.6.13-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 5.6.13-gentoo-ia64 ...
^[[32;01m*^[[0m >> Compiling 5.6.13-gentoo-ia64 modules ...
^[[32;01m*^[[0m >> Installing 5.6.13-gentoo-ia64 modules (and stripping) ...
^[[32;01m*^[[0m >> Generating module dependency data ...
^[[32;01m*^[[0m >> Saving config of successful build to '/etc/kernels/kernel-config-5.6.13-gentoo-ia64' ...
^[[32;01m*^[[0m initramfs: >> Initializing ...
^[[32;01m*^[[0m >> Appending devices cpio data ...
^[[32;01m*^[[0m >> Appending base_layout cpio data ...
^[[32;01m*^[[0m >> Appending auxilary cpio data ...
^[[32;01m*^[[0m >> Appending busybox cpio data ...
^[[32;01m*^[[0m >> Appending blkid cpio data ...
^[[31;01m*^[[0m ^[[31;01mACCESS DENIED^[[0m: open_wr: /usr/lib/python3.7/__pycache__/sysconfig.cpython-37.pyc.2305843009227963840
^[[31;01m*^[[0m ^[[31;01mACCESS DENIED^[[0m: open_wr: /usr/lib/python3.7/__pycache__/_sysconfigdata_m_linux_ia64-linux-gnu.cpython-37.pyc.2305843009230165600
^[[31;01m*^[[0m ^[[31;01mACCESS DENIED^[[0m: open_wr: /usr/lib/python3.7/__pycache__/sysconfig.cpython-37.pyc.2305843009227963840
^[[31;01m*^[[0m ^[[31;01mACCESS DENIED^[[0m: open_wr: /usr/lib/python3.7/__pycache__/_sysconfigdata_m_linux_ia64-linux-gnu.cpython-37.pyc.2305843009230165600
^[[31;01m*^[[0m ERROR: create_initramfs(): append_data(): append_blkid(): populate_binpkg(): gkbuild(): Failed to create binpkg of util-linux-2.35.1!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
16 May 2020 07:39:09 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
16 May 2020 07:39:10 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200516T031607Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200516T031607Z/var/tmp/portage is not a mount point. Skipping
16 May 2020 07:39:10 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1594, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1631, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1594, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1631, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
16 May 2020 07:39:10 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1594, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1631, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1474, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1600, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1594, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1631, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1474, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1600, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
16 May 2020 07:39:10 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
16 May 2020 07:39:10 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200516T031607Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200516T031607Z/tmp/kerncache is not a mount point. Skipping
16 May 2020 07:39:10 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200516T031607Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200516T031607Z/var/cache/binpkgs is not a mount point. Skipping
16 May 2020 07:39:10 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200516T031607Z/run is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200516T031607Z/run is not a mount point. Skipping
16 May 2020 07:39:10 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200516T031607Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200516T031607Z/dev/shm does not exist. Skipping
16 May 2020 07:39:10 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200516T031607Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200516T031607Z/dev/pts does not exist. Skipping
16 May 2020 07:39:10 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200516T031607Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200516T031607Z/var/tmp/portage is not a mount point. Skipping
16 May 2020 07:39:10 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200516T031607Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200516T031607Z/var/cache/distfiles is not a mount point. Skipping
16 May 2020 07:39:10 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200516T031607Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200516T031607Z/var/db/repos/gentoo is not a mount point. Skipping
16 May 2020 07:39:10 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200516T031607Z/dev is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200516T031607Z/dev is not a mount point. Skipping
16 May 2020 07:39:10 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200516T031607Z/proc is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/livecd-stage2-ia64-20200516T031607Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
5363.33user 286.66system 33:01.67elapsed 285%CPU (0avgtext+0avgdata 241472maxresident)k
0inputs+0outputs (2major+31142621minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200516T031607Z.UfpMqY/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-02-06 6:38 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-02-06 6:38 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
06 Feb 2020 05:59:15 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
06 Feb 2020 05:59:15 UTC: NOTICE : conf_values[options] = {'kerncache', 'clear-autoresume', 'snapcache', 'autoresume', 'bindist', 'pkgcache'}
06 Feb 2020 05:59:15 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
06 Feb 2020 05:59:15 UTC: NOTICE : Using target: livecd-stage2
06 Feb 2020 05:59:15 UTC: NOTICE : Source file specification matching setting is: strict
06 Feb 2020 05:59:15 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
06 Feb 2020 05:59:16 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200206T034406Z.tar.xz
06 Feb 2020 05:59:16 UTC: NOTICE : Removing AutoResume Points ...
06 Feb 2020 05:59:16 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200206T034406Z
06 Feb 2020 05:59:16 UTC: NOTICE : --- Running action sequence: unpack
06 Feb 2020 05:59:16 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
06 Feb 2020 05:59:16 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
06 Feb 2020 05:59:16 UTC: NOTICE : Removing AutoResume Points ...
06 Feb 2020 05:59:16 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200206T034406Z
06 Feb 2020 05:59:16 UTC: NOTICE : Clearing the chroot path ...
06 Feb 2020 05:59:16 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200206T034406Z
06 Feb 2020 05:59:16 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200206T034406Z.tar.xz
06 Feb 2020 05:59:16 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200206T034406Z (this may take some time) ..
06 Feb 2020 05:59:35 UTC: NOTICE : --- Running action sequence: unpack_snapshot
06 Feb 2020 05:59:35 UTC: NOTICE : --- Running action sequence: config_profile_link
06 Feb 2020 05:59:35 UTC: NOTICE : --- Running action sequence: setup_confdir
06 Feb 2020 05:59:35 UTC: NOTICE : --- Running action sequence: portage_overlay
06 Feb 2020 05:59:35 UTC: NOTICE : --- Running action sequence: bind
06 Feb 2020 05:59:35 UTC: NOTICE : --- Running action sequence: chroot_setup
06 Feb 2020 05:59:35 UTC: NOTICE : Setting up chroot...
06 Feb 2020 05:59:35 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
06 Feb 2020 05:59:35 UTC: WARNING : If your build fails look here first as the possible problem.
06 Feb 2020 05:59:35 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
06 Feb 2020 05:59:35 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
06 Feb 2020 05:59:35 UTC: WARNING : You have been warned.
06 Feb 2020 05:59:35 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200206T034406Z/etc/portage/make.conf
06 Feb 2020 05:59:35 UTC: NOTICE : STICKY-CONFIG is enabled
06 Feb 2020 05:59:35 UTC: NOTICE : --- Running action sequence: setup_environment
06 Feb 2020 05:59:35 UTC: NOTICE : --- Running action sequence: run_local
06 Feb 2020 05:59:35 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200206T034406Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200206T034406Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200206T034406Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20200122
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20200122::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20200122::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
* Messages for package sys-kernel/linux-firmware-20200122:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20200122' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200206T034406Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200206T034406Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200206T034406Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200206T034406Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200206T034406Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.2 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.97:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.2^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200206T034406Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200206T034406Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200206T034406Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200206T034406Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200206T034406Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.97-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.97-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.97-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
06 Feb 2020 06:38:47 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
06 Feb 2020 06:38:47 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
06 Feb 2020 06:38:47 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
06 Feb 2020 06:38:47 UTC: NOTICE : Cleaning up... Running unbind()
06 Feb 2020 06:38:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200206T034406Z/tmp/kerncache is not a mount point. Skipping
06 Feb 2020 06:38:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200206T034406Z/var/cache/binpkgs is not a mount point. Skipping
06 Feb 2020 06:38:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200206T034406Z/run is not a mount point. Skipping
06 Feb 2020 06:38:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200206T034406Z/dev/shm does not exist. Skipping
06 Feb 2020 06:38:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200206T034406Z/dev/pts does not exist. Skipping
06 Feb 2020 06:38:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200206T034406Z/var/tmp/portage is not a mount point. Skipping
06 Feb 2020 06:38:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200206T034406Z/var/cache/distfiles is not a mount point. Skipping
06 Feb 2020 06:38:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200206T034406Z/var/db/repos/gentoo is not a mount point. Skipping
06 Feb 2020 06:38:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200206T034406Z/dev is not a mount point. Skipping
06 Feb 2020 06:38:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200206T034406Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4136.06user 184.23system 39:33.13elapsed 182%CPU (0avgtext+0avgdata 232112maxresident)k
0inputs+0outputs (0major+16136034minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200206T034406Z.w7Cokd/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-02-05 6:22 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-02-05 6:22 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
05 Feb 2020 05:42:18 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
05 Feb 2020 05:42:18 UTC: NOTICE : conf_values[options] = {'pkgcache', 'bindist', 'kerncache', 'autoresume', 'clear-autoresume', 'snapcache'}
05 Feb 2020 05:42:18 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
05 Feb 2020 05:42:18 UTC: NOTICE : Using target: livecd-stage2
05 Feb 2020 05:42:18 UTC: NOTICE : Source file specification matching setting is: strict
05 Feb 2020 05:42:18 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
05 Feb 2020 05:42:19 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200205T031506Z.tar.xz
05 Feb 2020 05:42:19 UTC: NOTICE : Removing AutoResume Points ...
05 Feb 2020 05:42:19 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200205T031506Z
05 Feb 2020 05:42:19 UTC: NOTICE : --- Running action sequence: unpack
05 Feb 2020 05:42:19 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
05 Feb 2020 05:42:19 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
05 Feb 2020 05:42:19 UTC: NOTICE : Removing AutoResume Points ...
05 Feb 2020 05:42:19 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200205T031506Z
05 Feb 2020 05:42:19 UTC: NOTICE : Clearing the chroot path ...
05 Feb 2020 05:42:19 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200205T031506Z
05 Feb 2020 05:42:19 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200205T031506Z.tar.xz
05 Feb 2020 05:42:19 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200205T031506Z (this may take some time) ..
05 Feb 2020 05:42:37 UTC: NOTICE : --- Running action sequence: unpack_snapshot
05 Feb 2020 05:42:37 UTC: NOTICE : --- Running action sequence: config_profile_link
05 Feb 2020 05:42:37 UTC: NOTICE : --- Running action sequence: setup_confdir
05 Feb 2020 05:42:37 UTC: NOTICE : --- Running action sequence: portage_overlay
05 Feb 2020 05:42:37 UTC: NOTICE : --- Running action sequence: bind
05 Feb 2020 05:42:37 UTC: NOTICE : --- Running action sequence: chroot_setup
05 Feb 2020 05:42:37 UTC: NOTICE : Setting up chroot...
05 Feb 2020 05:42:37 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
05 Feb 2020 05:42:37 UTC: WARNING : If your build fails look here first as the possible problem.
05 Feb 2020 05:42:37 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
05 Feb 2020 05:42:37 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
05 Feb 2020 05:42:37 UTC: WARNING : You have been warned.
05 Feb 2020 05:42:37 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200205T031506Z/etc/portage/make.conf
05 Feb 2020 05:42:37 UTC: NOTICE : STICKY-CONFIG is enabled
05 Feb 2020 05:42:37 UTC: NOTICE : --- Running action sequence: setup_environment
05 Feb 2020 05:42:37 UTC: NOTICE : --- Running action sequence: run_local
05 Feb 2020 05:42:37 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200205T031506Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200205T031506Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200205T031506Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20200122
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20200122::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20200122::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
* Messages for package sys-kernel/linux-firmware-20200122:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20200122' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200205T031506Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200205T031506Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200205T031506Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200205T031506Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200205T031506Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.2 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.97:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.2^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200205T031506Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200205T031506Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200205T031506Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200205T031506Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200205T031506Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.97-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.97-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.97-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
05 Feb 2020 06:22:03 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
05 Feb 2020 06:22:04 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
05 Feb 2020 06:22:04 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
05 Feb 2020 06:22:04 UTC: NOTICE : Cleaning up... Running unbind()
05 Feb 2020 06:22:04 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200205T031506Z/tmp/kerncache is not a mount point. Skipping
05 Feb 2020 06:22:04 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200205T031506Z/var/cache/binpkgs is not a mount point. Skipping
05 Feb 2020 06:22:04 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200205T031506Z/run is not a mount point. Skipping
05 Feb 2020 06:22:04 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200205T031506Z/dev/shm does not exist. Skipping
05 Feb 2020 06:22:04 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200205T031506Z/dev/pts does not exist. Skipping
05 Feb 2020 06:22:04 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200205T031506Z/var/tmp/portage is not a mount point. Skipping
05 Feb 2020 06:22:04 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200205T031506Z/var/cache/distfiles is not a mount point. Skipping
05 Feb 2020 06:22:04 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200205T031506Z/var/db/repos/gentoo is not a mount point. Skipping
05 Feb 2020 06:22:04 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200205T031506Z/dev is not a mount point. Skipping
05 Feb 2020 06:22:04 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200205T031506Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4138.25user 181.81system 39:46.36elapsed 181%CPU (0avgtext+0avgdata 232112maxresident)k
0inputs+0outputs (0major+16137280minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200205T031506Z.lXsC9k/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-02-04 6:07 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-02-04 6:07 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
04 Feb 2020 05:28:14 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
04 Feb 2020 05:28:14 UTC: NOTICE : conf_values[options] = {'kerncache', 'autoresume', 'bindist', 'clear-autoresume', 'pkgcache', 'snapcache'}
04 Feb 2020 05:28:14 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
04 Feb 2020 05:28:14 UTC: NOTICE : Using target: livecd-stage2
04 Feb 2020 05:28:14 UTC: NOTICE : Source file specification matching setting is: strict
04 Feb 2020 05:28:14 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
04 Feb 2020 05:28:15 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200204T030907Z.tar.xz
04 Feb 2020 05:28:15 UTC: NOTICE : Removing AutoResume Points ...
04 Feb 2020 05:28:15 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200204T030907Z
04 Feb 2020 05:28:15 UTC: NOTICE : --- Running action sequence: unpack
04 Feb 2020 05:28:15 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
04 Feb 2020 05:28:15 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
04 Feb 2020 05:28:15 UTC: NOTICE : Removing AutoResume Points ...
04 Feb 2020 05:28:15 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200204T030907Z
04 Feb 2020 05:28:15 UTC: NOTICE : Clearing the chroot path ...
04 Feb 2020 05:28:15 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200204T030907Z
04 Feb 2020 05:28:15 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200204T030907Z.tar.xz
04 Feb 2020 05:28:15 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200204T030907Z (this may take some time) ..
04 Feb 2020 05:28:33 UTC: NOTICE : --- Running action sequence: unpack_snapshot
04 Feb 2020 05:28:33 UTC: NOTICE : --- Running action sequence: config_profile_link
04 Feb 2020 05:28:33 UTC: NOTICE : --- Running action sequence: setup_confdir
04 Feb 2020 05:28:33 UTC: NOTICE : --- Running action sequence: portage_overlay
04 Feb 2020 05:28:33 UTC: NOTICE : --- Running action sequence: bind
04 Feb 2020 05:28:33 UTC: NOTICE : --- Running action sequence: chroot_setup
04 Feb 2020 05:28:33 UTC: NOTICE : Setting up chroot...
04 Feb 2020 05:28:33 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
04 Feb 2020 05:28:33 UTC: WARNING : If your build fails look here first as the possible problem.
04 Feb 2020 05:28:33 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
04 Feb 2020 05:28:33 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
04 Feb 2020 05:28:33 UTC: WARNING : You have been warned.
04 Feb 2020 05:28:33 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200204T030907Z/etc/portage/make.conf
04 Feb 2020 05:28:33 UTC: NOTICE : STICKY-CONFIG is enabled
04 Feb 2020 05:28:33 UTC: NOTICE : --- Running action sequence: setup_environment
04 Feb 2020 05:28:33 UTC: NOTICE : --- Running action sequence: run_local
04 Feb 2020 05:28:33 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200204T030907Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200204T030907Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200204T030907Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20200122
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20200122::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20200122::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
* Messages for package sys-kernel/linux-firmware-20200122:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20200122' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200204T030907Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200204T030907Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200204T030907Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200204T030907Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200204T030907Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.2 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.97:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.2^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200204T030907Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200204T030907Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200204T030907Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200204T030907Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200204T030907Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.97-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.97-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.97-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
04 Feb 2020 06:07:51 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
04 Feb 2020 06:07:51 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
04 Feb 2020 06:07:51 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
04 Feb 2020 06:07:51 UTC: NOTICE : Cleaning up... Running unbind()
04 Feb 2020 06:07:51 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200204T030907Z/tmp/kerncache is not a mount point. Skipping
04 Feb 2020 06:07:51 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200204T030907Z/var/cache/binpkgs is not a mount point. Skipping
04 Feb 2020 06:07:51 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200204T030907Z/run is not a mount point. Skipping
04 Feb 2020 06:07:51 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200204T030907Z/dev/shm does not exist. Skipping
04 Feb 2020 06:07:51 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200204T030907Z/dev/pts does not exist. Skipping
04 Feb 2020 06:07:51 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200204T030907Z/var/tmp/portage is not a mount point. Skipping
04 Feb 2020 06:07:51 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200204T030907Z/var/cache/distfiles is not a mount point. Skipping
04 Feb 2020 06:07:51 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200204T030907Z/var/db/repos/gentoo is not a mount point. Skipping
04 Feb 2020 06:07:51 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200204T030907Z/dev is not a mount point. Skipping
04 Feb 2020 06:07:51 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200204T030907Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4135.80user 183.71system 39:37.75elapsed 181%CPU (0avgtext+0avgdata 232112maxresident)k
0inputs+0outputs (0major+16136982minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200204T030907Z.oV3fse/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-02-03 6:16 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-02-03 6:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
03 Feb 2020 05:36:57 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
03 Feb 2020 05:36:57 UTC: NOTICE : conf_values[options] = {'bindist', 'pkgcache', 'snapcache', 'autoresume', 'clear-autoresume', 'kerncache'}
03 Feb 2020 05:36:57 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
03 Feb 2020 05:36:57 UTC: NOTICE : Using target: livecd-stage2
03 Feb 2020 05:36:57 UTC: NOTICE : Source file specification matching setting is: strict
03 Feb 2020 05:36:57 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
03 Feb 2020 05:36:58 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200203T031208Z.tar.xz
03 Feb 2020 05:36:58 UTC: NOTICE : Removing AutoResume Points ...
03 Feb 2020 05:36:58 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200203T031208Z
03 Feb 2020 05:36:58 UTC: NOTICE : --- Running action sequence: unpack
03 Feb 2020 05:36:58 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
03 Feb 2020 05:36:58 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
03 Feb 2020 05:36:58 UTC: NOTICE : Removing AutoResume Points ...
03 Feb 2020 05:36:58 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200203T031208Z
03 Feb 2020 05:36:58 UTC: NOTICE : Clearing the chroot path ...
03 Feb 2020 05:36:58 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200203T031208Z
03 Feb 2020 05:36:58 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200203T031208Z.tar.xz
03 Feb 2020 05:36:58 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200203T031208Z (this may take some time) ..
03 Feb 2020 05:37:16 UTC: NOTICE : --- Running action sequence: unpack_snapshot
03 Feb 2020 05:37:16 UTC: NOTICE : --- Running action sequence: config_profile_link
03 Feb 2020 05:37:16 UTC: NOTICE : --- Running action sequence: setup_confdir
03 Feb 2020 05:37:16 UTC: NOTICE : --- Running action sequence: portage_overlay
03 Feb 2020 05:37:16 UTC: NOTICE : --- Running action sequence: bind
03 Feb 2020 05:37:16 UTC: NOTICE : --- Running action sequence: chroot_setup
03 Feb 2020 05:37:16 UTC: NOTICE : Setting up chroot...
03 Feb 2020 05:37:16 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
03 Feb 2020 05:37:16 UTC: WARNING : If your build fails look here first as the possible problem.
03 Feb 2020 05:37:16 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
03 Feb 2020 05:37:16 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
03 Feb 2020 05:37:16 UTC: WARNING : You have been warned.
03 Feb 2020 05:37:16 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200203T031208Z/etc/portage/make.conf
03 Feb 2020 05:37:16 UTC: NOTICE : STICKY-CONFIG is enabled
03 Feb 2020 05:37:16 UTC: NOTICE : --- Running action sequence: setup_environment
03 Feb 2020 05:37:16 UTC: NOTICE : --- Running action sequence: run_local
03 Feb 2020 05:37:16 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200203T031208Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200203T031208Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200203T031208Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20200122
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20200122::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20200122::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
* Messages for package sys-kernel/linux-firmware-20200122:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20200122' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200203T031208Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200203T031208Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200203T031208Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200203T031208Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200203T031208Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.2 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.97:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.2^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200203T031208Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200203T031208Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200203T031208Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200203T031208Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200203T031208Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.97-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.97-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.97-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
03 Feb 2020 06:16:47 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
03 Feb 2020 06:16:47 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
03 Feb 2020 06:16:47 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
03 Feb 2020 06:16:47 UTC: NOTICE : Cleaning up... Running unbind()
03 Feb 2020 06:16:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200203T031208Z/tmp/kerncache is not a mount point. Skipping
03 Feb 2020 06:16:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200203T031208Z/var/cache/binpkgs is not a mount point. Skipping
03 Feb 2020 06:16:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200203T031208Z/run is not a mount point. Skipping
03 Feb 2020 06:16:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200203T031208Z/dev/shm does not exist. Skipping
03 Feb 2020 06:16:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200203T031208Z/dev/pts does not exist. Skipping
03 Feb 2020 06:16:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200203T031208Z/var/tmp/portage is not a mount point. Skipping
03 Feb 2020 06:16:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200203T031208Z/var/cache/distfiles is not a mount point. Skipping
03 Feb 2020 06:16:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200203T031208Z/var/db/repos/gentoo is not a mount point. Skipping
03 Feb 2020 06:16:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200203T031208Z/dev is not a mount point. Skipping
03 Feb 2020 06:16:47 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200203T031208Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4134.23user 181.84system 39:50.85elapsed 180%CPU (0avgtext+0avgdata 232112maxresident)k
0inputs+0outputs (0major+16137331minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200203T031208Z.e3IExI/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-02-02 6:53 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-02-02 6:53 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
02 Feb 2020 06:13:12 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
02 Feb 2020 06:13:12 UTC: NOTICE : conf_values[options] = {'kerncache', 'snapcache', 'bindist', 'clear-autoresume', 'autoresume', 'pkgcache'}
02 Feb 2020 06:13:12 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
02 Feb 2020 06:13:13 UTC: NOTICE : Using target: livecd-stage2
02 Feb 2020 06:13:13 UTC: NOTICE : Source file specification matching setting is: strict
02 Feb 2020 06:13:13 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
02 Feb 2020 06:13:14 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200202T034807Z.tar.xz
02 Feb 2020 06:13:14 UTC: NOTICE : Removing AutoResume Points ...
02 Feb 2020 06:13:14 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200202T034807Z
02 Feb 2020 06:13:14 UTC: NOTICE : --- Running action sequence: unpack
02 Feb 2020 06:13:14 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
02 Feb 2020 06:13:14 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
02 Feb 2020 06:13:14 UTC: NOTICE : Removing AutoResume Points ...
02 Feb 2020 06:13:14 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200202T034807Z
02 Feb 2020 06:13:14 UTC: NOTICE : Clearing the chroot path ...
02 Feb 2020 06:13:14 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200202T034807Z
02 Feb 2020 06:13:14 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200202T034807Z.tar.xz
02 Feb 2020 06:13:14 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200202T034807Z (this may take some time) ..
02 Feb 2020 06:13:32 UTC: NOTICE : --- Running action sequence: unpack_snapshot
02 Feb 2020 06:13:32 UTC: NOTICE : --- Running action sequence: config_profile_link
02 Feb 2020 06:13:32 UTC: NOTICE : --- Running action sequence: setup_confdir
02 Feb 2020 06:13:32 UTC: NOTICE : --- Running action sequence: portage_overlay
02 Feb 2020 06:13:32 UTC: NOTICE : --- Running action sequence: bind
02 Feb 2020 06:13:32 UTC: NOTICE : --- Running action sequence: chroot_setup
02 Feb 2020 06:13:32 UTC: NOTICE : Setting up chroot...
02 Feb 2020 06:13:32 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
02 Feb 2020 06:13:32 UTC: WARNING : If your build fails look here first as the possible problem.
02 Feb 2020 06:13:32 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
02 Feb 2020 06:13:32 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
02 Feb 2020 06:13:32 UTC: WARNING : You have been warned.
02 Feb 2020 06:13:32 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200202T034807Z/etc/portage/make.conf
02 Feb 2020 06:13:32 UTC: NOTICE : STICKY-CONFIG is enabled
02 Feb 2020 06:13:32 UTC: NOTICE : --- Running action sequence: setup_environment
02 Feb 2020 06:13:32 UTC: NOTICE : --- Running action sequence: run_local
02 Feb 2020 06:13:32 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200202T034807Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200202T034807Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200202T034807Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20200122
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20200122::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20200122::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
* Messages for package sys-kernel/linux-firmware-20200122:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20200122' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200202T034807Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200202T034807Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200202T034807Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200202T034807Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200202T034807Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.2 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.97:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.2^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200202T034807Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200202T034807Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200202T034807Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200202T034807Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200202T034807Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.97-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.97-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.97-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
02 Feb 2020 06:53:02 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
02 Feb 2020 06:53:02 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
02 Feb 2020 06:53:02 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
02 Feb 2020 06:53:02 UTC: NOTICE : Cleaning up... Running unbind()
02 Feb 2020 06:53:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200202T034807Z/tmp/kerncache is not a mount point. Skipping
02 Feb 2020 06:53:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200202T034807Z/var/cache/binpkgs is not a mount point. Skipping
02 Feb 2020 06:53:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200202T034807Z/run is not a mount point. Skipping
02 Feb 2020 06:53:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200202T034807Z/dev/shm does not exist. Skipping
02 Feb 2020 06:53:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200202T034807Z/dev/pts does not exist. Skipping
02 Feb 2020 06:53:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200202T034807Z/var/tmp/portage is not a mount point. Skipping
02 Feb 2020 06:53:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200202T034807Z/var/cache/distfiles is not a mount point. Skipping
02 Feb 2020 06:53:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200202T034807Z/var/db/repos/gentoo is not a mount point. Skipping
02 Feb 2020 06:53:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200202T034807Z/dev is not a mount point. Skipping
02 Feb 2020 06:53:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200202T034807Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4139.20user 177.35system 39:49.94elapsed 180%CPU (0avgtext+0avgdata 232112maxresident)k
0inputs+0outputs (15major+16135003minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200202T034807Z.FSQemz/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-02-01 6:22 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-02-01 6:22 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
01 Feb 2020 05:41:52 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
01 Feb 2020 05:41:52 UTC: NOTICE : conf_values[options] = {'snapcache', 'kerncache', 'clear-autoresume', 'bindist', 'autoresume', 'pkgcache'}
01 Feb 2020 05:41:52 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
01 Feb 2020 05:41:52 UTC: NOTICE : Using target: livecd-stage2
01 Feb 2020 05:41:52 UTC: NOTICE : Source file specification matching setting is: strict
01 Feb 2020 05:41:52 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
01 Feb 2020 05:41:53 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200201T031103Z.tar.xz
01 Feb 2020 05:41:53 UTC: NOTICE : Removing AutoResume Points ...
01 Feb 2020 05:41:53 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200201T031103Z
01 Feb 2020 05:41:53 UTC: NOTICE : --- Running action sequence: unpack
01 Feb 2020 05:41:53 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
01 Feb 2020 05:41:53 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
01 Feb 2020 05:41:53 UTC: NOTICE : Removing AutoResume Points ...
01 Feb 2020 05:41:53 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200201T031103Z
01 Feb 2020 05:41:53 UTC: NOTICE : Clearing the chroot path ...
01 Feb 2020 05:41:53 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200201T031103Z
01 Feb 2020 05:41:53 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200201T031103Z.tar.xz
01 Feb 2020 05:41:53 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200201T031103Z (this may take some time) ..
01 Feb 2020 05:42:12 UTC: NOTICE : --- Running action sequence: unpack_snapshot
01 Feb 2020 05:42:12 UTC: NOTICE : --- Running action sequence: config_profile_link
01 Feb 2020 05:42:12 UTC: NOTICE : --- Running action sequence: setup_confdir
01 Feb 2020 05:42:12 UTC: NOTICE : --- Running action sequence: portage_overlay
01 Feb 2020 05:42:12 UTC: NOTICE : --- Running action sequence: bind
01 Feb 2020 05:42:12 UTC: NOTICE : --- Running action sequence: chroot_setup
01 Feb 2020 05:42:12 UTC: NOTICE : Setting up chroot...
01 Feb 2020 05:42:12 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
01 Feb 2020 05:42:12 UTC: WARNING : If your build fails look here first as the possible problem.
01 Feb 2020 05:42:12 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
01 Feb 2020 05:42:12 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
01 Feb 2020 05:42:12 UTC: WARNING : You have been warned.
01 Feb 2020 05:42:12 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200201T031103Z/etc/portage/make.conf
01 Feb 2020 05:42:12 UTC: NOTICE : STICKY-CONFIG is enabled
01 Feb 2020 05:42:12 UTC: NOTICE : --- Running action sequence: setup_environment
01 Feb 2020 05:42:12 UTC: NOTICE : --- Running action sequence: run_local
01 Feb 2020 05:42:12 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200201T031103Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200201T031103Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200201T031103Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20200122
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20200122::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20200122::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
* Messages for package sys-kernel/linux-firmware-20200122:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20200122' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200201T031103Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200201T031103Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200201T031103Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200201T031103Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200201T031103Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.2 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.97:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.2^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200201T031103Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200201T031103Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200201T031103Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200201T031103Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200201T031103Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.97-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.97-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.97-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
01 Feb 2020 06:22:28 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
01 Feb 2020 06:22:28 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
01 Feb 2020 06:22:28 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
01 Feb 2020 06:22:28 UTC: NOTICE : Cleaning up... Running unbind()
01 Feb 2020 06:22:28 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200201T031103Z/tmp/kerncache is not a mount point. Skipping
01 Feb 2020 06:22:28 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200201T031103Z/var/cache/binpkgs is not a mount point. Skipping
01 Feb 2020 06:22:28 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200201T031103Z/run is not a mount point. Skipping
01 Feb 2020 06:22:28 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200201T031103Z/dev/shm does not exist. Skipping
01 Feb 2020 06:22:28 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200201T031103Z/dev/pts does not exist. Skipping
01 Feb 2020 06:22:28 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200201T031103Z/var/tmp/portage is not a mount point. Skipping
01 Feb 2020 06:22:28 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200201T031103Z/var/cache/distfiles is not a mount point. Skipping
01 Feb 2020 06:22:28 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200201T031103Z/var/db/repos/gentoo is not a mount point. Skipping
01 Feb 2020 06:22:28 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200201T031103Z/dev is not a mount point. Skipping
01 Feb 2020 06:22:28 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200201T031103Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4137.47user 184.07system 40:36.51elapsed 177%CPU (0avgtext+0avgdata 232112maxresident)k
0inputs+0outputs (0major+16134501minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200201T031103Z.3LzxjO/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-01-31 6:12 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-01-31 6:12 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
31 Jan 2020 05:32:34 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
31 Jan 2020 05:32:34 UTC: NOTICE : conf_values[options] = {'autoresume', 'pkgcache', 'clear-autoresume', 'snapcache', 'kerncache', 'bindist'}
31 Jan 2020 05:32:34 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
31 Jan 2020 05:32:34 UTC: NOTICE : Using target: livecd-stage2
31 Jan 2020 05:32:34 UTC: NOTICE : Source file specification matching setting is: strict
31 Jan 2020 05:32:34 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
31 Jan 2020 05:32:35 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200131T031705Z.tar.xz
31 Jan 2020 05:32:35 UTC: NOTICE : Removing AutoResume Points ...
31 Jan 2020 05:32:35 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200131T031705Z
31 Jan 2020 05:32:35 UTC: NOTICE : --- Running action sequence: unpack
31 Jan 2020 05:32:35 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
31 Jan 2020 05:32:35 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
31 Jan 2020 05:32:35 UTC: NOTICE : Removing AutoResume Points ...
31 Jan 2020 05:32:35 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200131T031705Z
31 Jan 2020 05:32:35 UTC: NOTICE : Clearing the chroot path ...
31 Jan 2020 05:32:35 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200131T031705Z
31 Jan 2020 05:32:35 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200131T031705Z.tar.xz
31 Jan 2020 05:32:35 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200131T031705Z (this may take some time) ..
31 Jan 2020 05:32:52 UTC: NOTICE : --- Running action sequence: unpack_snapshot
31 Jan 2020 05:32:52 UTC: NOTICE : --- Running action sequence: config_profile_link
31 Jan 2020 05:32:52 UTC: NOTICE : --- Running action sequence: setup_confdir
31 Jan 2020 05:32:52 UTC: NOTICE : --- Running action sequence: portage_overlay
31 Jan 2020 05:32:52 UTC: NOTICE : --- Running action sequence: bind
31 Jan 2020 05:32:52 UTC: NOTICE : --- Running action sequence: chroot_setup
31 Jan 2020 05:32:52 UTC: NOTICE : Setting up chroot...
31 Jan 2020 05:32:52 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
31 Jan 2020 05:32:52 UTC: WARNING : If your build fails look here first as the possible problem.
31 Jan 2020 05:32:52 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
31 Jan 2020 05:32:52 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
31 Jan 2020 05:32:52 UTC: WARNING : You have been warned.
31 Jan 2020 05:32:52 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200131T031705Z/etc/portage/make.conf
31 Jan 2020 05:32:52 UTC: NOTICE : STICKY-CONFIG is enabled
31 Jan 2020 05:32:52 UTC: NOTICE : --- Running action sequence: setup_environment
31 Jan 2020 05:32:52 UTC: NOTICE : --- Running action sequence: run_local
31 Jan 2020 05:32:52 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200131T031705Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200131T031705Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200131T031705Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20200122
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20200122::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20200122::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
* Messages for package sys-kernel/linux-firmware-20200122:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20200122' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200131T031705Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200131T031705Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200131T031705Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200131T031705Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200131T031705Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.2 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.97:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.2^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200131T031705Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200131T031705Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200131T031705Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200131T031705Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200131T031705Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.97-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.97-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.97-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
31 Jan 2020 06:12:48 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
31 Jan 2020 06:12:48 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
31 Jan 2020 06:12:48 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
31 Jan 2020 06:12:48 UTC: NOTICE : Cleaning up... Running unbind()
31 Jan 2020 06:12:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200131T031705Z/tmp/kerncache is not a mount point. Skipping
31 Jan 2020 06:12:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200131T031705Z/var/cache/binpkgs is not a mount point. Skipping
31 Jan 2020 06:12:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200131T031705Z/run is not a mount point. Skipping
31 Jan 2020 06:12:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200131T031705Z/dev/shm does not exist. Skipping
31 Jan 2020 06:12:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200131T031705Z/dev/pts does not exist. Skipping
31 Jan 2020 06:12:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200131T031705Z/var/tmp/portage is not a mount point. Skipping
31 Jan 2020 06:12:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200131T031705Z/var/cache/distfiles is not a mount point. Skipping
31 Jan 2020 06:12:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200131T031705Z/var/db/repos/gentoo is not a mount point. Skipping
31 Jan 2020 06:12:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200131T031705Z/dev is not a mount point. Skipping
31 Jan 2020 06:12:48 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200131T031705Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4137.35user 180.73system 40:15.09elapsed 178%CPU (0avgtext+0avgdata 232288maxresident)k
0inputs+0outputs (12major+16135278minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200131T031705Z.fB4pNW/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-01-30 6:31 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-01-30 6:31 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
30 Jan 2020 05:51:02 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
30 Jan 2020 05:51:02 UTC: NOTICE : conf_values[options] = {'kerncache', 'bindist', 'clear-autoresume', 'autoresume', 'snapcache', 'pkgcache'}
30 Jan 2020 05:51:02 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
30 Jan 2020 05:51:02 UTC: NOTICE : Using target: livecd-stage2
30 Jan 2020 05:51:02 UTC: NOTICE : Source file specification matching setting is: strict
30 Jan 2020 05:51:02 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
30 Jan 2020 05:51:03 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200130T033506Z.tar.xz
30 Jan 2020 05:51:03 UTC: NOTICE : Removing AutoResume Points ...
30 Jan 2020 05:51:03 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200130T033506Z
30 Jan 2020 05:51:03 UTC: NOTICE : --- Running action sequence: unpack
30 Jan 2020 05:51:03 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
30 Jan 2020 05:51:03 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
30 Jan 2020 05:51:03 UTC: NOTICE : Removing AutoResume Points ...
30 Jan 2020 05:51:03 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200130T033506Z
30 Jan 2020 05:51:03 UTC: NOTICE : Clearing the chroot path ...
30 Jan 2020 05:51:03 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200130T033506Z
30 Jan 2020 05:51:03 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200130T033506Z.tar.xz
30 Jan 2020 05:51:03 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200130T033506Z (this may take some time) ..
30 Jan 2020 05:51:20 UTC: NOTICE : --- Running action sequence: unpack_snapshot
30 Jan 2020 05:51:20 UTC: NOTICE : --- Running action sequence: config_profile_link
30 Jan 2020 05:51:20 UTC: NOTICE : --- Running action sequence: setup_confdir
30 Jan 2020 05:51:20 UTC: NOTICE : --- Running action sequence: portage_overlay
30 Jan 2020 05:51:20 UTC: NOTICE : --- Running action sequence: bind
30 Jan 2020 05:51:20 UTC: NOTICE : --- Running action sequence: chroot_setup
30 Jan 2020 05:51:20 UTC: NOTICE : Setting up chroot...
30 Jan 2020 05:51:20 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
30 Jan 2020 05:51:20 UTC: WARNING : If your build fails look here first as the possible problem.
30 Jan 2020 05:51:20 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
30 Jan 2020 05:51:20 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
30 Jan 2020 05:51:20 UTC: WARNING : You have been warned.
30 Jan 2020 05:51:20 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200130T033506Z/etc/portage/make.conf
30 Jan 2020 05:51:20 UTC: NOTICE : STICKY-CONFIG is enabled
30 Jan 2020 05:51:20 UTC: NOTICE : --- Running action sequence: setup_environment
30 Jan 2020 05:51:20 UTC: NOTICE : --- Running action sequence: run_local
30 Jan 2020 05:51:20 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200130T033506Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200130T033506Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200130T033506Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20200122
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20200122::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20200122::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
* Messages for package sys-kernel/linux-firmware-20200122:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20200122' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200130T033506Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200130T033506Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200130T033506Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200130T033506Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200130T033506Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.2 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.97:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.2^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200130T033506Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200130T033506Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200130T033506Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200130T033506Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200130T033506Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.97-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.97-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.97-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
30 Jan 2020 06:31:00 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
30 Jan 2020 06:31:01 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
30 Jan 2020 06:31:01 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
30 Jan 2020 06:31:01 UTC: NOTICE : Cleaning up... Running unbind()
30 Jan 2020 06:31:01 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200130T033506Z/tmp/kerncache is not a mount point. Skipping
30 Jan 2020 06:31:01 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200130T033506Z/var/cache/binpkgs is not a mount point. Skipping
30 Jan 2020 06:31:01 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200130T033506Z/run is not a mount point. Skipping
30 Jan 2020 06:31:01 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200130T033506Z/dev/shm does not exist. Skipping
30 Jan 2020 06:31:01 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200130T033506Z/dev/pts does not exist. Skipping
30 Jan 2020 06:31:01 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200130T033506Z/var/tmp/portage is not a mount point. Skipping
30 Jan 2020 06:31:01 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200130T033506Z/var/cache/distfiles is not a mount point. Skipping
30 Jan 2020 06:31:01 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200130T033506Z/var/db/repos/gentoo is not a mount point. Skipping
30 Jan 2020 06:31:01 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200130T033506Z/dev is not a mount point. Skipping
30 Jan 2020 06:31:01 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200130T033506Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4139.03user 180.76system 39:59.54elapsed 180%CPU (0avgtext+0avgdata 232288maxresident)k
0inputs+0outputs (0major+16138587minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200130T033506Z.rcc7A8/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-01-29 6:42 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-01-29 6:42 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
29 Jan 2020 06:02:01 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
29 Jan 2020 06:02:01 UTC: NOTICE : conf_values[options] = {'kerncache', 'clear-autoresume', 'pkgcache', 'autoresume', 'bindist', 'snapcache'}
29 Jan 2020 06:02:01 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
29 Jan 2020 06:02:01 UTC: NOTICE : Using target: livecd-stage2
29 Jan 2020 06:02:01 UTC: NOTICE : Source file specification matching setting is: strict
29 Jan 2020 06:02:01 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
29 Jan 2020 06:02:03 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200129T034306Z.tar.xz
29 Jan 2020 06:02:03 UTC: NOTICE : Removing AutoResume Points ...
29 Jan 2020 06:02:03 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200129T034306Z
29 Jan 2020 06:02:03 UTC: NOTICE : --- Running action sequence: unpack
29 Jan 2020 06:02:03 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
29 Jan 2020 06:02:03 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
29 Jan 2020 06:02:03 UTC: NOTICE : Removing AutoResume Points ...
29 Jan 2020 06:02:03 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200129T034306Z
29 Jan 2020 06:02:03 UTC: NOTICE : Clearing the chroot path ...
29 Jan 2020 06:02:03 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200129T034306Z
29 Jan 2020 06:02:03 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200129T034306Z.tar.xz
29 Jan 2020 06:02:03 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200129T034306Z (this may take some time) ..
29 Jan 2020 06:02:24 UTC: NOTICE : --- Running action sequence: unpack_snapshot
29 Jan 2020 06:02:24 UTC: NOTICE : --- Running action sequence: config_profile_link
29 Jan 2020 06:02:24 UTC: NOTICE : --- Running action sequence: setup_confdir
29 Jan 2020 06:02:24 UTC: NOTICE : --- Running action sequence: portage_overlay
29 Jan 2020 06:02:24 UTC: NOTICE : --- Running action sequence: bind
29 Jan 2020 06:02:24 UTC: NOTICE : --- Running action sequence: chroot_setup
29 Jan 2020 06:02:24 UTC: NOTICE : Setting up chroot...
29 Jan 2020 06:02:24 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
29 Jan 2020 06:02:24 UTC: WARNING : If your build fails look here first as the possible problem.
29 Jan 2020 06:02:24 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
29 Jan 2020 06:02:24 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
29 Jan 2020 06:02:24 UTC: WARNING : You have been warned.
29 Jan 2020 06:02:24 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200129T034306Z/etc/portage/make.conf
29 Jan 2020 06:02:24 UTC: NOTICE : STICKY-CONFIG is enabled
29 Jan 2020 06:02:24 UTC: NOTICE : --- Running action sequence: setup_environment
29 Jan 2020 06:02:24 UTC: NOTICE : --- Running action sequence: run_local
29 Jan 2020 06:02:24 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200129T034306Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200129T034306Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200129T034306Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20200122
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20200122::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20200122::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
* Messages for package sys-kernel/linux-firmware-20200122:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20200122' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200129T034306Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200129T034306Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200129T034306Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200129T034306Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200129T034306Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.2 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.97:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.2^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200129T034306Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200129T034306Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200129T034306Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200129T034306Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200129T034306Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.97-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.97-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.97-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
29 Jan 2020 06:42:12 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
29 Jan 2020 06:42:13 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
29 Jan 2020 06:42:13 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
29 Jan 2020 06:42:13 UTC: NOTICE : Cleaning up... Running unbind()
29 Jan 2020 06:42:13 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200129T034306Z/tmp/kerncache is not a mount point. Skipping
29 Jan 2020 06:42:13 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200129T034306Z/var/cache/binpkgs is not a mount point. Skipping
29 Jan 2020 06:42:13 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200129T034306Z/run is not a mount point. Skipping
29 Jan 2020 06:42:13 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200129T034306Z/dev/shm does not exist. Skipping
29 Jan 2020 06:42:13 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200129T034306Z/dev/pts does not exist. Skipping
29 Jan 2020 06:42:13 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200129T034306Z/var/tmp/portage is not a mount point. Skipping
29 Jan 2020 06:42:13 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200129T034306Z/var/cache/distfiles is not a mount point. Skipping
29 Jan 2020 06:42:13 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200129T034306Z/var/db/repos/gentoo is not a mount point. Skipping
29 Jan 2020 06:42:13 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200129T034306Z/dev is not a mount point. Skipping
29 Jan 2020 06:42:13 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200129T034306Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4133.68user 180.86system 40:11.82elapsed 178%CPU (0avgtext+0avgdata 232288maxresident)k
0inputs+0outputs (0major+16139051minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200129T034306Z.vUtzZZ/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-01-28 6:33 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-01-28 6:33 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
28 Jan 2020 05:53:16 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
28 Jan 2020 05:53:16 UTC: NOTICE : conf_values[options] = {'pkgcache', 'kerncache', 'autoresume', 'clear-autoresume', 'bindist', 'snapcache'}
28 Jan 2020 05:53:16 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
28 Jan 2020 05:53:16 UTC: NOTICE : Using target: livecd-stage2
28 Jan 2020 05:53:16 UTC: NOTICE : Source file specification matching setting is: strict
28 Jan 2020 05:53:16 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
28 Jan 2020 05:53:17 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200128T032103Z.tar.xz
28 Jan 2020 05:53:17 UTC: NOTICE : Removing AutoResume Points ...
28 Jan 2020 05:53:17 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200128T032103Z
28 Jan 2020 05:53:17 UTC: NOTICE : --- Running action sequence: unpack
28 Jan 2020 05:53:17 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
28 Jan 2020 05:53:17 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
28 Jan 2020 05:53:17 UTC: NOTICE : Removing AutoResume Points ...
28 Jan 2020 05:53:17 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200128T032103Z
28 Jan 2020 05:53:17 UTC: NOTICE : Clearing the chroot path ...
28 Jan 2020 05:53:17 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200128T032103Z
28 Jan 2020 05:53:17 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200128T032103Z.tar.xz
28 Jan 2020 05:53:17 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200128T032103Z (this may take some time) ..
28 Jan 2020 05:53:35 UTC: NOTICE : --- Running action sequence: unpack_snapshot
28 Jan 2020 05:53:35 UTC: NOTICE : --- Running action sequence: config_profile_link
28 Jan 2020 05:53:35 UTC: NOTICE : --- Running action sequence: setup_confdir
28 Jan 2020 05:53:35 UTC: NOTICE : --- Running action sequence: portage_overlay
28 Jan 2020 05:53:35 UTC: NOTICE : --- Running action sequence: bind
28 Jan 2020 05:53:35 UTC: NOTICE : --- Running action sequence: chroot_setup
28 Jan 2020 05:53:35 UTC: NOTICE : Setting up chroot...
28 Jan 2020 05:53:35 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
28 Jan 2020 05:53:35 UTC: WARNING : If your build fails look here first as the possible problem.
28 Jan 2020 05:53:35 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
28 Jan 2020 05:53:35 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
28 Jan 2020 05:53:35 UTC: WARNING : You have been warned.
28 Jan 2020 05:53:35 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200128T032103Z/etc/portage/make.conf
28 Jan 2020 05:53:35 UTC: NOTICE : STICKY-CONFIG is enabled
28 Jan 2020 05:53:35 UTC: NOTICE : --- Running action sequence: setup_environment
28 Jan 2020 05:53:35 UTC: NOTICE : --- Running action sequence: run_local
28 Jan 2020 05:53:35 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200128T032103Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200128T032103Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200128T032103Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20200122
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20200122::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20200122::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
* Messages for package sys-kernel/linux-firmware-20200122:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20200122' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200128T032103Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200128T032103Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200128T032103Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200128T032103Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200128T032103Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.2 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.97:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.2^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200128T032103Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200128T032103Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200128T032103Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200128T032103Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200128T032103Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.97-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.97-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.97-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
28 Jan 2020 06:33:40 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
28 Jan 2020 06:33:41 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
28 Jan 2020 06:33:41 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
28 Jan 2020 06:33:41 UTC: NOTICE : Cleaning up... Running unbind()
28 Jan 2020 06:33:41 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200128T032103Z/tmp/kerncache is not a mount point. Skipping
28 Jan 2020 06:33:41 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200128T032103Z/var/cache/binpkgs is not a mount point. Skipping
28 Jan 2020 06:33:41 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200128T032103Z/run is not a mount point. Skipping
28 Jan 2020 06:33:41 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200128T032103Z/dev/shm does not exist. Skipping
28 Jan 2020 06:33:41 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200128T032103Z/dev/pts does not exist. Skipping
28 Jan 2020 06:33:41 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200128T032103Z/var/tmp/portage is not a mount point. Skipping
28 Jan 2020 06:33:41 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200128T032103Z/var/cache/distfiles is not a mount point. Skipping
28 Jan 2020 06:33:41 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200128T032103Z/var/db/repos/gentoo is not a mount point. Skipping
28 Jan 2020 06:33:41 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200128T032103Z/dev is not a mount point. Skipping
28 Jan 2020 06:33:41 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200128T032103Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4139.29user 181.94system 40:25.33elapsed 178%CPU (0avgtext+0avgdata 232288maxresident)k
0inputs+0outputs (0major+16138851minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200128T032103Z.VmFlKk/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-01-27 6:30 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-01-27 6:30 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
27 Jan 2020 05:49:55 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
27 Jan 2020 05:49:55 UTC: NOTICE : conf_values[options] = {'clear-autoresume', 'kerncache', 'autoresume', 'bindist', 'snapcache', 'pkgcache'}
27 Jan 2020 05:49:55 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
27 Jan 2020 05:49:55 UTC: NOTICE : Using target: livecd-stage2
27 Jan 2020 05:49:55 UTC: NOTICE : Source file specification matching setting is: strict
27 Jan 2020 05:49:55 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
27 Jan 2020 05:49:57 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200127T033105Z.tar.xz
27 Jan 2020 05:49:57 UTC: NOTICE : Removing AutoResume Points ...
27 Jan 2020 05:49:57 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200127T033105Z
27 Jan 2020 05:49:57 UTC: NOTICE : --- Running action sequence: unpack
27 Jan 2020 05:49:57 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
27 Jan 2020 05:49:57 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
27 Jan 2020 05:49:57 UTC: NOTICE : Removing AutoResume Points ...
27 Jan 2020 05:49:57 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200127T033105Z
27 Jan 2020 05:49:57 UTC: NOTICE : Clearing the chroot path ...
27 Jan 2020 05:49:57 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200127T033105Z
27 Jan 2020 05:49:57 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200127T033105Z.tar.xz
27 Jan 2020 05:49:57 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200127T033105Z (this may take some time) ..
27 Jan 2020 05:50:13 UTC: NOTICE : --- Running action sequence: unpack_snapshot
27 Jan 2020 05:50:13 UTC: NOTICE : --- Running action sequence: config_profile_link
27 Jan 2020 05:50:13 UTC: NOTICE : --- Running action sequence: setup_confdir
27 Jan 2020 05:50:13 UTC: NOTICE : --- Running action sequence: portage_overlay
27 Jan 2020 05:50:13 UTC: NOTICE : --- Running action sequence: bind
27 Jan 2020 05:50:13 UTC: NOTICE : --- Running action sequence: chroot_setup
27 Jan 2020 05:50:13 UTC: NOTICE : Setting up chroot...
27 Jan 2020 05:50:13 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
27 Jan 2020 05:50:13 UTC: WARNING : If your build fails look here first as the possible problem.
27 Jan 2020 05:50:13 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
27 Jan 2020 05:50:13 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
27 Jan 2020 05:50:13 UTC: WARNING : You have been warned.
27 Jan 2020 05:50:13 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200127T033105Z/etc/portage/make.conf
27 Jan 2020 05:50:13 UTC: NOTICE : STICKY-CONFIG is enabled
27 Jan 2020 05:50:13 UTC: NOTICE : --- Running action sequence: setup_environment
27 Jan 2020 05:50:13 UTC: NOTICE : --- Running action sequence: run_local
27 Jan 2020 05:50:13 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200127T033105Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200127T033105Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200127T033105Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20200122
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20200122::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20200122::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
* Messages for package sys-kernel/linux-firmware-20200122:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20200122' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200127T033105Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200127T033105Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200127T033105Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200127T033105Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200127T033105Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.2 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.97:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.2^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200127T033105Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200127T033105Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200127T033105Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200127T033105Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200127T033105Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.97-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.97-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.97-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
27 Jan 2020 06:30:08 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
27 Jan 2020 06:30:09 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
27 Jan 2020 06:30:09 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
27 Jan 2020 06:30:09 UTC: NOTICE : Cleaning up... Running unbind()
27 Jan 2020 06:30:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200127T033105Z/tmp/kerncache is not a mount point. Skipping
27 Jan 2020 06:30:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200127T033105Z/var/cache/binpkgs is not a mount point. Skipping
27 Jan 2020 06:30:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200127T033105Z/run is not a mount point. Skipping
27 Jan 2020 06:30:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200127T033105Z/dev/shm does not exist. Skipping
27 Jan 2020 06:30:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200127T033105Z/dev/pts does not exist. Skipping
27 Jan 2020 06:30:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200127T033105Z/var/tmp/portage is not a mount point. Skipping
27 Jan 2020 06:30:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200127T033105Z/var/cache/distfiles is not a mount point. Skipping
27 Jan 2020 06:30:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200127T033105Z/var/db/repos/gentoo is not a mount point. Skipping
27 Jan 2020 06:30:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200127T033105Z/dev is not a mount point. Skipping
27 Jan 2020 06:30:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200127T033105Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4138.29user 180.25system 40:13.80elapsed 178%CPU (0avgtext+0avgdata 232288maxresident)k
0inputs+0outputs (0major+16138033minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200127T033105Z.cYEQYi/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-01-26 6:32 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-01-26 6:32 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
26 Jan 2020 05:51:22 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
26 Jan 2020 05:51:22 UTC: NOTICE : conf_values[options] = {'clear-autoresume', 'autoresume', 'snapcache', 'bindist', 'pkgcache', 'kerncache'}
26 Jan 2020 05:51:22 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
26 Jan 2020 05:51:22 UTC: NOTICE : Using target: livecd-stage2
26 Jan 2020 05:51:22 UTC: NOTICE : Source file specification matching setting is: strict
26 Jan 2020 05:51:22 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
26 Jan 2020 05:51:24 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200126T033405Z.tar.xz
26 Jan 2020 05:51:24 UTC: NOTICE : Removing AutoResume Points ...
26 Jan 2020 05:51:24 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200126T033405Z
26 Jan 2020 05:51:24 UTC: NOTICE : --- Running action sequence: unpack
26 Jan 2020 05:51:24 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
26 Jan 2020 05:51:24 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
26 Jan 2020 05:51:24 UTC: NOTICE : Removing AutoResume Points ...
26 Jan 2020 05:51:24 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200126T033405Z
26 Jan 2020 05:51:24 UTC: NOTICE : Clearing the chroot path ...
26 Jan 2020 05:51:24 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200126T033405Z
26 Jan 2020 05:51:24 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200126T033405Z.tar.xz
26 Jan 2020 05:51:24 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200126T033405Z (this may take some time) ..
26 Jan 2020 05:51:41 UTC: NOTICE : --- Running action sequence: unpack_snapshot
26 Jan 2020 05:51:41 UTC: NOTICE : --- Running action sequence: config_profile_link
26 Jan 2020 05:51:41 UTC: NOTICE : --- Running action sequence: setup_confdir
26 Jan 2020 05:51:41 UTC: NOTICE : --- Running action sequence: portage_overlay
26 Jan 2020 05:51:41 UTC: NOTICE : --- Running action sequence: bind
26 Jan 2020 05:51:41 UTC: NOTICE : --- Running action sequence: chroot_setup
26 Jan 2020 05:51:41 UTC: NOTICE : Setting up chroot...
26 Jan 2020 05:51:41 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
26 Jan 2020 05:51:41 UTC: WARNING : If your build fails look here first as the possible problem.
26 Jan 2020 05:51:41 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
26 Jan 2020 05:51:41 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
26 Jan 2020 05:51:41 UTC: WARNING : You have been warned.
26 Jan 2020 05:51:41 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200126T033405Z/etc/portage/make.conf
26 Jan 2020 05:51:41 UTC: NOTICE : STICKY-CONFIG is enabled
26 Jan 2020 05:51:41 UTC: NOTICE : --- Running action sequence: setup_environment
26 Jan 2020 05:51:41 UTC: NOTICE : --- Running action sequence: run_local
26 Jan 2020 05:51:41 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200126T033405Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200126T033405Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200126T033405Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-kernel/linux-firmware-20200122
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging (3 of 4) sys-kernel/linux-firmware-20200122::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20200122::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
* Messages for package sys-kernel/linux-firmware-20200122:
* Building using saved configfile "/etc/portage/savedconfig/sys-kernel/linux-firmware"
* Your configuration for sys-kernel/linux-firmware-20200122 has been saved in
* "/etc/portage/savedconfig/sys-kernel/linux-firmware" for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20200122' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200126T033405Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200126T033405Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200126T033405Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200126T033405Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200126T033405Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.2 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.97:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.2^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200126T033405Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200126T033405Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200126T033405Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200126T033405Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200126T033405Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.97-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.97-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.97-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
26 Jan 2020 06:32:34 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
26 Jan 2020 06:32:34 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
26 Jan 2020 06:32:34 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
26 Jan 2020 06:32:34 UTC: NOTICE : Cleaning up... Running unbind()
26 Jan 2020 06:32:34 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200126T033405Z/tmp/kerncache is not a mount point. Skipping
26 Jan 2020 06:32:34 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200126T033405Z/var/cache/binpkgs is not a mount point. Skipping
26 Jan 2020 06:32:34 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200126T033405Z/run is not a mount point. Skipping
26 Jan 2020 06:32:34 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200126T033405Z/dev/shm does not exist. Skipping
26 Jan 2020 06:32:34 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200126T033405Z/dev/pts does not exist. Skipping
26 Jan 2020 06:32:34 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200126T033405Z/var/tmp/portage is not a mount point. Skipping
26 Jan 2020 06:32:34 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200126T033405Z/var/cache/distfiles is not a mount point. Skipping
26 Jan 2020 06:32:34 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200126T033405Z/var/db/repos/gentoo is not a mount point. Skipping
26 Jan 2020 06:32:34 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200126T033405Z/dev is not a mount point. Skipping
26 Jan 2020 06:32:34 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200126T033405Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4206.44user 189.27system 41:12.51elapsed 177%CPU (0avgtext+0avgdata 232288maxresident)k
0inputs+0outputs (15major+16489788minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200126T033405Z.ohgDfS/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-01-25 6:12 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-01-25 6:12 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
25 Jan 2020 05:32:07 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
25 Jan 2020 05:32:07 UTC: NOTICE : conf_values[options] = {'snapcache', 'autoresume', 'bindist', 'clear-autoresume', 'kerncache', 'pkgcache'}
25 Jan 2020 05:32:07 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
25 Jan 2020 05:32:07 UTC: NOTICE : Using target: livecd-stage2
25 Jan 2020 05:32:07 UTC: NOTICE : Source file specification matching setting is: strict
25 Jan 2020 05:32:07 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
25 Jan 2020 05:32:08 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200125T031604Z.tar.xz
25 Jan 2020 05:32:08 UTC: NOTICE : Removing AutoResume Points ...
25 Jan 2020 05:32:08 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200125T031604Z
25 Jan 2020 05:32:08 UTC: NOTICE : --- Running action sequence: unpack
25 Jan 2020 05:32:08 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
25 Jan 2020 05:32:08 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
25 Jan 2020 05:32:08 UTC: NOTICE : Removing AutoResume Points ...
25 Jan 2020 05:32:08 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200125T031604Z
25 Jan 2020 05:32:08 UTC: NOTICE : Clearing the chroot path ...
25 Jan 2020 05:32:08 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200125T031604Z
25 Jan 2020 05:32:08 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200125T031604Z.tar.xz
25 Jan 2020 05:32:08 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200125T031604Z (this may take some time) ..
25 Jan 2020 05:32:25 UTC: NOTICE : --- Running action sequence: unpack_snapshot
25 Jan 2020 05:32:25 UTC: NOTICE : --- Running action sequence: config_profile_link
25 Jan 2020 05:32:25 UTC: NOTICE : --- Running action sequence: setup_confdir
25 Jan 2020 05:32:25 UTC: NOTICE : --- Running action sequence: portage_overlay
25 Jan 2020 05:32:25 UTC: NOTICE : --- Running action sequence: bind
25 Jan 2020 05:32:25 UTC: NOTICE : --- Running action sequence: chroot_setup
25 Jan 2020 05:32:25 UTC: NOTICE : Setting up chroot...
25 Jan 2020 05:32:25 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
25 Jan 2020 05:32:25 UTC: WARNING : If your build fails look here first as the possible problem.
25 Jan 2020 05:32:25 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
25 Jan 2020 05:32:25 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
25 Jan 2020 05:32:25 UTC: WARNING : You have been warned.
25 Jan 2020 05:32:25 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200125T031604Z/etc/portage/make.conf
25 Jan 2020 05:32:25 UTC: NOTICE : STICKY-CONFIG is enabled
25 Jan 2020 05:32:25 UTC: NOTICE : --- Running action sequence: setup_environment
25 Jan 2020 05:32:25 UTC: NOTICE : --- Running action sequence: run_local
25 Jan 2020 05:32:25 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200125T031604Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200125T031604Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200125T031604Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200125T031604Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200125T031604Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200125T031604Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200125T031604Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200125T031604Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.2 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.97:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.2^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200125T031604Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200125T031604Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200125T031604Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200125T031604Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200125T031604Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.97-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.97-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.97-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
25 Jan 2020 06:12:17 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
25 Jan 2020 06:12:17 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
25 Jan 2020 06:12:17 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
25 Jan 2020 06:12:17 UTC: NOTICE : Cleaning up... Running unbind()
25 Jan 2020 06:12:17 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200125T031604Z/tmp/kerncache is not a mount point. Skipping
25 Jan 2020 06:12:17 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200125T031604Z/var/cache/binpkgs is not a mount point. Skipping
25 Jan 2020 06:12:17 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200125T031604Z/run is not a mount point. Skipping
25 Jan 2020 06:12:17 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200125T031604Z/dev/shm does not exist. Skipping
25 Jan 2020 06:12:17 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200125T031604Z/dev/pts does not exist. Skipping
25 Jan 2020 06:12:17 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200125T031604Z/var/tmp/portage is not a mount point. Skipping
25 Jan 2020 06:12:17 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200125T031604Z/var/cache/distfiles is not a mount point. Skipping
25 Jan 2020 06:12:17 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200125T031604Z/var/db/repos/gentoo is not a mount point. Skipping
25 Jan 2020 06:12:17 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200125T031604Z/dev is not a mount point. Skipping
25 Jan 2020 06:12:17 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200125T031604Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4132.67user 183.88system 40:10.50elapsed 179%CPU (0avgtext+0avgdata 232288maxresident)k
0inputs+0outputs (0major+16139202minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200125T031604Z.0xLnuL/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-01-24 6:14 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-01-24 6:14 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
24 Jan 2020 05:34:46 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
24 Jan 2020 05:34:46 UTC: NOTICE : conf_values[options] = {'bindist', 'pkgcache', 'clear-autoresume', 'autoresume', 'kerncache', 'snapcache'}
24 Jan 2020 05:34:46 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
24 Jan 2020 05:34:46 UTC: NOTICE : Using target: livecd-stage2
24 Jan 2020 05:34:46 UTC: NOTICE : Source file specification matching setting is: strict
24 Jan 2020 05:34:46 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
24 Jan 2020 05:34:48 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200124T030905Z.tar.xz
24 Jan 2020 05:34:48 UTC: NOTICE : Removing AutoResume Points ...
24 Jan 2020 05:34:48 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200124T030905Z
24 Jan 2020 05:34:48 UTC: NOTICE : --- Running action sequence: unpack
24 Jan 2020 05:34:48 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
24 Jan 2020 05:34:48 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
24 Jan 2020 05:34:48 UTC: NOTICE : Removing AutoResume Points ...
24 Jan 2020 05:34:48 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200124T030905Z
24 Jan 2020 05:34:48 UTC: NOTICE : Clearing the chroot path ...
24 Jan 2020 05:34:48 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200124T030905Z
24 Jan 2020 05:34:48 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200124T030905Z.tar.xz
24 Jan 2020 05:34:48 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200124T030905Z (this may take some time) ..
24 Jan 2020 05:35:05 UTC: NOTICE : --- Running action sequence: unpack_snapshot
24 Jan 2020 05:35:05 UTC: NOTICE : --- Running action sequence: config_profile_link
24 Jan 2020 05:35:05 UTC: NOTICE : --- Running action sequence: setup_confdir
24 Jan 2020 05:35:05 UTC: NOTICE : --- Running action sequence: portage_overlay
24 Jan 2020 05:35:05 UTC: NOTICE : --- Running action sequence: bind
24 Jan 2020 05:35:05 UTC: NOTICE : --- Running action sequence: chroot_setup
24 Jan 2020 05:35:05 UTC: NOTICE : Setting up chroot...
24 Jan 2020 05:35:05 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
24 Jan 2020 05:35:05 UTC: WARNING : If your build fails look here first as the possible problem.
24 Jan 2020 05:35:05 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
24 Jan 2020 05:35:05 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
24 Jan 2020 05:35:05 UTC: WARNING : You have been warned.
24 Jan 2020 05:35:06 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200124T030905Z/etc/portage/make.conf
24 Jan 2020 05:35:06 UTC: NOTICE : STICKY-CONFIG is enabled
24 Jan 2020 05:35:06 UTC: NOTICE : --- Running action sequence: setup_environment
24 Jan 2020 05:35:06 UTC: NOTICE : --- Running action sequence: run_local
24 Jan 2020 05:35:06 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200124T030905Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200124T030905Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200124T030905Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200124T030905Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200124T030905Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200124T030905Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200124T030905Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200124T030905Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.2 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.97:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.2^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200124T030905Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200124T030905Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200124T030905Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200124T030905Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200124T030905Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.97-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.97-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.97-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
24 Jan 2020 06:14:48 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
24 Jan 2020 06:14:49 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
24 Jan 2020 06:14:49 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
24 Jan 2020 06:14:49 UTC: NOTICE : Cleaning up... Running unbind()
24 Jan 2020 06:14:49 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200124T030905Z/tmp/kerncache is not a mount point. Skipping
24 Jan 2020 06:14:49 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200124T030905Z/var/cache/binpkgs is not a mount point. Skipping
24 Jan 2020 06:14:49 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200124T030905Z/run is not a mount point. Skipping
24 Jan 2020 06:14:49 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200124T030905Z/dev/shm does not exist. Skipping
24 Jan 2020 06:14:49 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200124T030905Z/dev/pts does not exist. Skipping
24 Jan 2020 06:14:49 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200124T030905Z/var/tmp/portage is not a mount point. Skipping
24 Jan 2020 06:14:49 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200124T030905Z/var/cache/distfiles is not a mount point. Skipping
24 Jan 2020 06:14:49 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200124T030905Z/var/db/repos/gentoo is not a mount point. Skipping
24 Jan 2020 06:14:49 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200124T030905Z/dev is not a mount point. Skipping
24 Jan 2020 06:14:49 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200124T030905Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4128.73user 185.10system 40:02.66elapsed 179%CPU (0avgtext+0avgdata 232288maxresident)k
0inputs+0outputs (0major+16141042minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200124T030905Z.H7crPI/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-01-23 6:53 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-01-23 6:53 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
23 Jan 2020 06:12:57 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
23 Jan 2020 06:12:57 UTC: NOTICE : conf_values[options] = {'kerncache', 'autoresume', 'pkgcache', 'clear-autoresume', 'bindist', 'snapcache'}
23 Jan 2020 06:12:57 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
23 Jan 2020 06:12:57 UTC: NOTICE : Using target: livecd-stage2
23 Jan 2020 06:12:57 UTC: NOTICE : Source file specification matching setting is: strict
23 Jan 2020 06:12:57 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
23 Jan 2020 06:12:58 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200123T035004Z.tar.xz
23 Jan 2020 06:12:58 UTC: NOTICE : Removing AutoResume Points ...
23 Jan 2020 06:12:58 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200123T035004Z
23 Jan 2020 06:12:58 UTC: NOTICE : --- Running action sequence: unpack
23 Jan 2020 06:12:58 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
23 Jan 2020 06:12:58 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
23 Jan 2020 06:12:58 UTC: NOTICE : Removing AutoResume Points ...
23 Jan 2020 06:12:58 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200123T035004Z
23 Jan 2020 06:12:58 UTC: NOTICE : Clearing the chroot path ...
23 Jan 2020 06:12:58 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200123T035004Z
23 Jan 2020 06:12:58 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200123T035004Z.tar.xz
23 Jan 2020 06:12:58 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200123T035004Z (this may take some time) ..
23 Jan 2020 06:13:15 UTC: NOTICE : --- Running action sequence: unpack_snapshot
23 Jan 2020 06:13:15 UTC: NOTICE : --- Running action sequence: config_profile_link
23 Jan 2020 06:13:15 UTC: NOTICE : --- Running action sequence: setup_confdir
23 Jan 2020 06:13:15 UTC: NOTICE : --- Running action sequence: portage_overlay
23 Jan 2020 06:13:15 UTC: NOTICE : --- Running action sequence: bind
23 Jan 2020 06:13:15 UTC: NOTICE : --- Running action sequence: chroot_setup
23 Jan 2020 06:13:15 UTC: NOTICE : Setting up chroot...
23 Jan 2020 06:13:15 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
23 Jan 2020 06:13:15 UTC: WARNING : If your build fails look here first as the possible problem.
23 Jan 2020 06:13:15 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
23 Jan 2020 06:13:15 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
23 Jan 2020 06:13:15 UTC: WARNING : You have been warned.
23 Jan 2020 06:13:15 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200123T035004Z/etc/portage/make.conf
23 Jan 2020 06:13:15 UTC: NOTICE : STICKY-CONFIG is enabled
23 Jan 2020 06:13:15 UTC: NOTICE : --- Running action sequence: setup_environment
23 Jan 2020 06:13:15 UTC: NOTICE : --- Running action sequence: run_local
23 Jan 2020 06:13:15 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200123T035004Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200123T035004Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200123T035004Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200123T035004Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200123T035004Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200123T035004Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200123T035004Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200123T035004Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.2 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.97:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.2^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200123T035004Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200123T035004Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200123T035004Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200123T035004Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200123T035004Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.97-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.97-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.97-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
23 Jan 2020 06:53:14 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
23 Jan 2020 06:53:14 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
23 Jan 2020 06:53:14 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
23 Jan 2020 06:53:14 UTC: NOTICE : Cleaning up... Running unbind()
23 Jan 2020 06:53:14 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200123T035004Z/tmp/kerncache is not a mount point. Skipping
23 Jan 2020 06:53:14 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200123T035004Z/var/cache/binpkgs is not a mount point. Skipping
23 Jan 2020 06:53:14 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200123T035004Z/run is not a mount point. Skipping
23 Jan 2020 06:53:14 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200123T035004Z/dev/shm does not exist. Skipping
23 Jan 2020 06:53:14 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200123T035004Z/dev/pts does not exist. Skipping
23 Jan 2020 06:53:14 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200123T035004Z/var/tmp/portage is not a mount point. Skipping
23 Jan 2020 06:53:14 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200123T035004Z/var/cache/distfiles is not a mount point. Skipping
23 Jan 2020 06:53:14 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200123T035004Z/var/db/repos/gentoo is not a mount point. Skipping
23 Jan 2020 06:53:14 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200123T035004Z/dev is not a mount point. Skipping
23 Jan 2020 06:53:14 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200123T035004Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4133.64user 183.31system 40:17.78elapsed 178%CPU (0avgtext+0avgdata 232288maxresident)k
0inputs+0outputs (1major+16141716minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200123T035004Z.Ogz5MZ/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-01-22 6:41 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-01-22 6:41 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
22 Jan 2020 06:01:11 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
22 Jan 2020 06:01:11 UTC: NOTICE : conf_values[options] = {'snapcache', 'bindist', 'clear-autoresume', 'pkgcache', 'autoresume', 'kerncache'}
22 Jan 2020 06:01:12 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
22 Jan 2020 06:01:12 UTC: NOTICE : Using target: livecd-stage2
22 Jan 2020 06:01:12 UTC: NOTICE : Source file specification matching setting is: strict
22 Jan 2020 06:01:12 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
22 Jan 2020 06:01:13 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200122T034605Z.tar.xz
22 Jan 2020 06:01:13 UTC: NOTICE : Removing AutoResume Points ...
22 Jan 2020 06:01:13 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200122T034605Z
22 Jan 2020 06:01:13 UTC: NOTICE : --- Running action sequence: unpack
22 Jan 2020 06:01:13 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
22 Jan 2020 06:01:13 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
22 Jan 2020 06:01:13 UTC: NOTICE : Removing AutoResume Points ...
22 Jan 2020 06:01:13 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200122T034605Z
22 Jan 2020 06:01:13 UTC: NOTICE : Clearing the chroot path ...
22 Jan 2020 06:01:13 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200122T034605Z
22 Jan 2020 06:01:13 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200122T034605Z.tar.xz
22 Jan 2020 06:01:13 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200122T034605Z (this may take some time) ..
22 Jan 2020 06:01:35 UTC: NOTICE : --- Running action sequence: unpack_snapshot
22 Jan 2020 06:01:35 UTC: NOTICE : --- Running action sequence: config_profile_link
22 Jan 2020 06:01:35 UTC: NOTICE : --- Running action sequence: setup_confdir
22 Jan 2020 06:01:35 UTC: NOTICE : --- Running action sequence: portage_overlay
22 Jan 2020 06:01:35 UTC: NOTICE : --- Running action sequence: bind
22 Jan 2020 06:01:35 UTC: NOTICE : --- Running action sequence: chroot_setup
22 Jan 2020 06:01:35 UTC: NOTICE : Setting up chroot...
22 Jan 2020 06:01:35 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
22 Jan 2020 06:01:35 UTC: WARNING : If your build fails look here first as the possible problem.
22 Jan 2020 06:01:35 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
22 Jan 2020 06:01:35 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
22 Jan 2020 06:01:35 UTC: WARNING : You have been warned.
22 Jan 2020 06:01:35 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200122T034605Z/etc/portage/make.conf
22 Jan 2020 06:01:35 UTC: NOTICE : STICKY-CONFIG is enabled
22 Jan 2020 06:01:35 UTC: NOTICE : --- Running action sequence: setup_environment
22 Jan 2020 06:01:35 UTC: NOTICE : --- Running action sequence: run_local
22 Jan 2020 06:01:35 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200122T034605Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200122T034605Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200122T034605Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200122T034605Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200122T034605Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200122T034605Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200122T034605Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200122T034605Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.2 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.97:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.2^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200122T034605Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200122T034605Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200122T034605Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200122T034605Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200122T034605Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.97-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.97-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.97-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
22 Jan 2020 06:41:09 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
22 Jan 2020 06:41:09 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
22 Jan 2020 06:41:09 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
22 Jan 2020 06:41:09 UTC: NOTICE : Cleaning up... Running unbind()
22 Jan 2020 06:41:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200122T034605Z/tmp/kerncache is not a mount point. Skipping
22 Jan 2020 06:41:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200122T034605Z/var/cache/binpkgs is not a mount point. Skipping
22 Jan 2020 06:41:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200122T034605Z/run is not a mount point. Skipping
22 Jan 2020 06:41:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200122T034605Z/dev/shm does not exist. Skipping
22 Jan 2020 06:41:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200122T034605Z/dev/pts does not exist. Skipping
22 Jan 2020 06:41:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200122T034605Z/var/tmp/portage is not a mount point. Skipping
22 Jan 2020 06:41:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200122T034605Z/var/cache/distfiles is not a mount point. Skipping
22 Jan 2020 06:41:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200122T034605Z/var/db/repos/gentoo is not a mount point. Skipping
22 Jan 2020 06:41:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200122T034605Z/dev is not a mount point. Skipping
22 Jan 2020 06:41:09 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200122T034605Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4136.32user 182.24system 39:57.88elapsed 180%CPU (0avgtext+0avgdata 232288maxresident)k
0inputs+0outputs (1major+16140227minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200122T034605Z.141HEH/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-01-21 7:16 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-01-21 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
21 Jan 2020 06:28:32 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
21 Jan 2020 06:28:32 UTC: NOTICE : conf_values[options] = {'pkgcache', 'snapcache', 'kerncache', 'bindist', 'clear-autoresume', 'autoresume'}
21 Jan 2020 06:28:32 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
21 Jan 2020 06:28:33 UTC: NOTICE : Using target: livecd-stage2
21 Jan 2020 06:28:33 UTC: NOTICE : Source file specification matching setting is: strict
21 Jan 2020 06:28:33 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
21 Jan 2020 06:28:34 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200121T034005Z.tar.xz
21 Jan 2020 06:28:34 UTC: NOTICE : Removing AutoResume Points ...
21 Jan 2020 06:28:34 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200121T034005Z
21 Jan 2020 06:28:34 UTC: NOTICE : --- Running action sequence: unpack
21 Jan 2020 06:28:34 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
21 Jan 2020 06:28:34 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
21 Jan 2020 06:28:34 UTC: NOTICE : Removing AutoResume Points ...
21 Jan 2020 06:28:34 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200121T034005Z
21 Jan 2020 06:28:34 UTC: NOTICE : Clearing the chroot path ...
21 Jan 2020 06:28:34 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200121T034005Z
21 Jan 2020 06:28:34 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200121T034005Z.tar.xz
21 Jan 2020 06:28:34 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200121T034005Z (this may take some time) ..
21 Jan 2020 06:28:51 UTC: NOTICE : --- Running action sequence: unpack_snapshot
21 Jan 2020 06:28:51 UTC: NOTICE : --- Running action sequence: config_profile_link
21 Jan 2020 06:28:51 UTC: NOTICE : --- Running action sequence: setup_confdir
21 Jan 2020 06:28:51 UTC: NOTICE : --- Running action sequence: portage_overlay
21 Jan 2020 06:28:51 UTC: NOTICE : --- Running action sequence: bind
21 Jan 2020 06:28:51 UTC: NOTICE : --- Running action sequence: chroot_setup
21 Jan 2020 06:28:51 UTC: NOTICE : Setting up chroot...
21 Jan 2020 06:28:51 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
21 Jan 2020 06:28:51 UTC: WARNING : If your build fails look here first as the possible problem.
21 Jan 2020 06:28:51 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
21 Jan 2020 06:28:51 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
21 Jan 2020 06:28:51 UTC: WARNING : You have been warned.
21 Jan 2020 06:28:51 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200121T034005Z/etc/portage/make.conf
21 Jan 2020 06:28:51 UTC: NOTICE : STICKY-CONFIG is enabled
21 Jan 2020 06:28:51 UTC: NOTICE : --- Running action sequence: setup_environment
21 Jan 2020 06:28:51 UTC: NOTICE : --- Running action sequence: run_local
21 Jan 2020 06:28:51 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200121T034005Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200121T034005Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200121T034005Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200121T034005Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200121T034005Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200121T034005Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200121T034005Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200121T034005Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.2 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.97::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.97:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.2^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200121T034005Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200121T034005Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200121T034005Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200121T034005Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200121T034005Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.97-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.97-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.97-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
21 Jan 2020 07:16:19 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
21 Jan 2020 07:16:20 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
21 Jan 2020 07:16:20 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
21 Jan 2020 07:16:20 UTC: NOTICE : Cleaning up... Running unbind()
21 Jan 2020 07:16:20 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200121T034005Z/tmp/kerncache is not a mount point. Skipping
21 Jan 2020 07:16:20 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200121T034005Z/var/cache/binpkgs is not a mount point. Skipping
21 Jan 2020 07:16:20 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200121T034005Z/run is not a mount point. Skipping
21 Jan 2020 07:16:20 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200121T034005Z/dev/shm does not exist. Skipping
21 Jan 2020 07:16:20 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200121T034005Z/dev/pts does not exist. Skipping
21 Jan 2020 07:16:20 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200121T034005Z/var/tmp/portage is not a mount point. Skipping
21 Jan 2020 07:16:20 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200121T034005Z/var/cache/distfiles is not a mount point. Skipping
21 Jan 2020 07:16:20 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200121T034005Z/var/db/repos/gentoo is not a mount point. Skipping
21 Jan 2020 07:16:20 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200121T034005Z/dev is not a mount point. Skipping
21 Jan 2020 07:16:20 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200121T034005Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4131.06user 183.13system 47:47.83elapsed 150%CPU (0avgtext+0avgdata 232288maxresident)k
0inputs+0outputs (3major+16141985minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200121T034005Z.dTtp6D/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-01-20 6:28 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-01-20 6:28 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
20 Jan 2020 05:48:09 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
20 Jan 2020 05:48:09 UTC: NOTICE : conf_values[options] = {'bindist', 'kerncache', 'pkgcache', 'autoresume', 'clear-autoresume', 'snapcache'}
20 Jan 2020 05:48:09 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
20 Jan 2020 05:48:09 UTC: NOTICE : Using target: livecd-stage2
20 Jan 2020 05:48:10 UTC: NOTICE : Source file specification matching setting is: strict
20 Jan 2020 05:48:10 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
20 Jan 2020 05:48:11 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200120T032706Z.tar.xz
20 Jan 2020 05:48:11 UTC: NOTICE : Removing AutoResume Points ...
20 Jan 2020 05:48:11 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200120T032706Z
20 Jan 2020 05:48:11 UTC: NOTICE : --- Running action sequence: unpack
20 Jan 2020 05:48:11 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
20 Jan 2020 05:48:11 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
20 Jan 2020 05:48:11 UTC: NOTICE : Removing AutoResume Points ...
20 Jan 2020 05:48:11 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200120T032706Z
20 Jan 2020 05:48:11 UTC: NOTICE : Clearing the chroot path ...
20 Jan 2020 05:48:11 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200120T032706Z
20 Jan 2020 05:48:11 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200120T032706Z.tar.xz
20 Jan 2020 05:48:11 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200120T032706Z (this may take some time) ..
20 Jan 2020 05:48:28 UTC: NOTICE : --- Running action sequence: unpack_snapshot
20 Jan 2020 05:48:28 UTC: NOTICE : --- Running action sequence: config_profile_link
20 Jan 2020 05:48:28 UTC: NOTICE : --- Running action sequence: setup_confdir
20 Jan 2020 05:48:28 UTC: NOTICE : --- Running action sequence: portage_overlay
20 Jan 2020 05:48:28 UTC: NOTICE : --- Running action sequence: bind
20 Jan 2020 05:48:28 UTC: NOTICE : --- Running action sequence: chroot_setup
20 Jan 2020 05:48:28 UTC: NOTICE : Setting up chroot...
20 Jan 2020 05:48:28 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
20 Jan 2020 05:48:28 UTC: WARNING : If your build fails look here first as the possible problem.
20 Jan 2020 05:48:28 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
20 Jan 2020 05:48:28 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
20 Jan 2020 05:48:28 UTC: WARNING : You have been warned.
20 Jan 2020 05:48:28 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200120T032706Z/etc/portage/make.conf
20 Jan 2020 05:48:28 UTC: NOTICE : STICKY-CONFIG is enabled
20 Jan 2020 05:48:28 UTC: NOTICE : --- Running action sequence: setup_environment
20 Jan 2020 05:48:28 UTC: NOTICE : --- Running action sequence: run_local
20 Jan 2020 05:48:28 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200120T032706Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200120T032706Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200120T032706Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200120T032706Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200120T032706Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200120T032706Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200120T032706Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200120T032706Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.2 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.86:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.2^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200120T032706Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200120T032706Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200120T032706Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200120T032706Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200120T032706Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.86-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
20 Jan 2020 06:28:34 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
20 Jan 2020 06:28:34 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
20 Jan 2020 06:28:34 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
20 Jan 2020 06:28:34 UTC: NOTICE : Cleaning up... Running unbind()
20 Jan 2020 06:28:34 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200120T032706Z/tmp/kerncache is not a mount point. Skipping
20 Jan 2020 06:28:34 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200120T032706Z/var/cache/binpkgs is not a mount point. Skipping
20 Jan 2020 06:28:34 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200120T032706Z/run is not a mount point. Skipping
20 Jan 2020 06:28:34 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200120T032706Z/dev/shm does not exist. Skipping
20 Jan 2020 06:28:34 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200120T032706Z/dev/pts does not exist. Skipping
20 Jan 2020 06:28:34 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200120T032706Z/var/tmp/portage is not a mount point. Skipping
20 Jan 2020 06:28:34 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200120T032706Z/var/cache/distfiles is not a mount point. Skipping
20 Jan 2020 06:28:34 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200120T032706Z/var/db/repos/gentoo is not a mount point. Skipping
20 Jan 2020 06:28:34 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200120T032706Z/dev is not a mount point. Skipping
20 Jan 2020 06:28:34 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200120T032706Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4125.91user 180.39system 40:25.59elapsed 177%CPU (0avgtext+0avgdata 232032maxresident)k
0inputs+0outputs (0major+16029119minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200120T032706Z.RXRPdi/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-01-19 6:51 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-01-19 6:51 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
19 Jan 2020 06:10:26 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
19 Jan 2020 06:10:26 UTC: NOTICE : conf_values[options] = {'snapcache', 'clear-autoresume', 'autoresume', 'bindist', 'kerncache', 'pkgcache'}
19 Jan 2020 06:10:26 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
19 Jan 2020 06:10:26 UTC: NOTICE : Using target: livecd-stage2
19 Jan 2020 06:10:26 UTC: NOTICE : Source file specification matching setting is: strict
19 Jan 2020 06:10:26 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
19 Jan 2020 06:10:27 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200119T035004Z.tar.xz
19 Jan 2020 06:10:27 UTC: NOTICE : Removing AutoResume Points ...
19 Jan 2020 06:10:27 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200119T035004Z
19 Jan 2020 06:10:27 UTC: NOTICE : --- Running action sequence: unpack
19 Jan 2020 06:10:27 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
19 Jan 2020 06:10:27 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
19 Jan 2020 06:10:27 UTC: NOTICE : Removing AutoResume Points ...
19 Jan 2020 06:10:27 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200119T035004Z
19 Jan 2020 06:10:27 UTC: NOTICE : Clearing the chroot path ...
19 Jan 2020 06:10:27 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200119T035004Z
19 Jan 2020 06:10:27 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200119T035004Z.tar.xz
19 Jan 2020 06:10:27 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200119T035004Z (this may take some time) ..
19 Jan 2020 06:10:44 UTC: NOTICE : --- Running action sequence: unpack_snapshot
19 Jan 2020 06:10:44 UTC: NOTICE : --- Running action sequence: config_profile_link
19 Jan 2020 06:10:44 UTC: NOTICE : --- Running action sequence: setup_confdir
19 Jan 2020 06:10:44 UTC: NOTICE : --- Running action sequence: portage_overlay
19 Jan 2020 06:10:44 UTC: NOTICE : --- Running action sequence: bind
19 Jan 2020 06:10:45 UTC: NOTICE : --- Running action sequence: chroot_setup
19 Jan 2020 06:10:45 UTC: NOTICE : Setting up chroot...
19 Jan 2020 06:10:45 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
19 Jan 2020 06:10:45 UTC: WARNING : If your build fails look here first as the possible problem.
19 Jan 2020 06:10:45 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
19 Jan 2020 06:10:45 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
19 Jan 2020 06:10:45 UTC: WARNING : You have been warned.
19 Jan 2020 06:10:45 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200119T035004Z/etc/portage/make.conf
19 Jan 2020 06:10:45 UTC: NOTICE : STICKY-CONFIG is enabled
19 Jan 2020 06:10:45 UTC: NOTICE : --- Running action sequence: setup_environment
19 Jan 2020 06:10:45 UTC: NOTICE : --- Running action sequence: run_local
19 Jan 2020 06:10:45 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200119T035004Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200119T035004Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200119T035004Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200119T035004Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200119T035004Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200119T035004Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200119T035004Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200119T035004Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.2 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.86:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.2^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200119T035004Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200119T035004Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200119T035004Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200119T035004Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200119T035004Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.86-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
19 Jan 2020 06:51:11 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
19 Jan 2020 06:51:11 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
19 Jan 2020 06:51:11 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
19 Jan 2020 06:51:11 UTC: NOTICE : Cleaning up... Running unbind()
19 Jan 2020 06:51:11 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200119T035004Z/tmp/kerncache is not a mount point. Skipping
19 Jan 2020 06:51:11 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200119T035004Z/var/cache/binpkgs is not a mount point. Skipping
19 Jan 2020 06:51:11 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200119T035004Z/run is not a mount point. Skipping
19 Jan 2020 06:51:11 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200119T035004Z/dev/shm does not exist. Skipping
19 Jan 2020 06:51:11 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200119T035004Z/dev/pts does not exist. Skipping
19 Jan 2020 06:51:11 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200119T035004Z/var/tmp/portage is not a mount point. Skipping
19 Jan 2020 06:51:11 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200119T035004Z/var/cache/distfiles is not a mount point. Skipping
19 Jan 2020 06:51:11 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200119T035004Z/var/db/repos/gentoo is not a mount point. Skipping
19 Jan 2020 06:51:11 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200119T035004Z/dev is not a mount point. Skipping
19 Jan 2020 06:51:11 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200119T035004Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4123.23user 181.21system 40:45.81elapsed 175%CPU (0avgtext+0avgdata 232032maxresident)k
0inputs+0outputs (0major+16028655minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200119T035004Z.1m2CG5/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-01-18 6:42 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-01-18 6:42 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
18 Jan 2020 06:00:58 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
18 Jan 2020 06:00:58 UTC: NOTICE : conf_values[options] = {'snapcache', 'bindist', 'pkgcache', 'clear-autoresume', 'autoresume', 'kerncache'}
18 Jan 2020 06:00:58 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
18 Jan 2020 06:00:58 UTC: NOTICE : Using target: livecd-stage2
18 Jan 2020 06:00:58 UTC: NOTICE : Source file specification matching setting is: strict
18 Jan 2020 06:00:58 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
18 Jan 2020 06:00:59 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200118T031804Z.tar.xz
18 Jan 2020 06:00:59 UTC: NOTICE : Removing AutoResume Points ...
18 Jan 2020 06:00:59 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200118T031804Z
18 Jan 2020 06:00:59 UTC: NOTICE : --- Running action sequence: unpack
18 Jan 2020 06:00:59 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
18 Jan 2020 06:00:59 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
18 Jan 2020 06:00:59 UTC: NOTICE : Removing AutoResume Points ...
18 Jan 2020 06:00:59 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200118T031804Z
18 Jan 2020 06:00:59 UTC: NOTICE : Clearing the chroot path ...
18 Jan 2020 06:00:59 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200118T031804Z
18 Jan 2020 06:00:59 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200118T031804Z.tar.xz
18 Jan 2020 06:00:59 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200118T031804Z (this may take some time) ..
18 Jan 2020 06:01:30 UTC: NOTICE : --- Running action sequence: unpack_snapshot
18 Jan 2020 06:01:30 UTC: NOTICE : --- Running action sequence: config_profile_link
18 Jan 2020 06:01:31 UTC: NOTICE : --- Running action sequence: setup_confdir
18 Jan 2020 06:01:31 UTC: NOTICE : --- Running action sequence: portage_overlay
18 Jan 2020 06:01:31 UTC: NOTICE : --- Running action sequence: bind
18 Jan 2020 06:01:31 UTC: NOTICE : --- Running action sequence: chroot_setup
18 Jan 2020 06:01:31 UTC: NOTICE : Setting up chroot...
18 Jan 2020 06:01:31 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
18 Jan 2020 06:01:31 UTC: WARNING : If your build fails look here first as the possible problem.
18 Jan 2020 06:01:31 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
18 Jan 2020 06:01:31 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
18 Jan 2020 06:01:31 UTC: WARNING : You have been warned.
18 Jan 2020 06:01:31 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200118T031804Z/etc/portage/make.conf
18 Jan 2020 06:01:31 UTC: NOTICE : STICKY-CONFIG is enabled
18 Jan 2020 06:01:31 UTC: NOTICE : --- Running action sequence: setup_environment
18 Jan 2020 06:01:31 UTC: NOTICE : --- Running action sequence: run_local
18 Jan 2020 06:01:31 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200118T031804Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200118T031804Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200118T031804Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200118T031804Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200118T031804Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200118T031804Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200118T031804Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200118T031804Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.2 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.86:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.2^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200118T031804Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200118T031804Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200118T031804Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200118T031804Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200118T031804Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.86-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
18 Jan 2020 06:42:58 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
18 Jan 2020 06:42:58 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
18 Jan 2020 06:42:58 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
18 Jan 2020 06:42:58 UTC: NOTICE : Cleaning up... Running unbind()
18 Jan 2020 06:42:58 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200118T031804Z/tmp/kerncache is not a mount point. Skipping
18 Jan 2020 06:42:58 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200118T031804Z/var/cache/binpkgs is not a mount point. Skipping
18 Jan 2020 06:42:58 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200118T031804Z/run is not a mount point. Skipping
18 Jan 2020 06:42:58 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200118T031804Z/dev/shm does not exist. Skipping
18 Jan 2020 06:42:58 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200118T031804Z/dev/pts does not exist. Skipping
18 Jan 2020 06:42:58 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200118T031804Z/var/tmp/portage is not a mount point. Skipping
18 Jan 2020 06:42:58 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200118T031804Z/var/cache/distfiles is not a mount point. Skipping
18 Jan 2020 06:42:58 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200118T031804Z/var/db/repos/gentoo is not a mount point. Skipping
18 Jan 2020 06:42:58 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200118T031804Z/dev is not a mount point. Skipping
18 Jan 2020 06:42:58 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200118T031804Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4158.29user 183.96system 42:00.89elapsed 172%CPU (0avgtext+0avgdata 232032maxresident)k
0inputs+0outputs (0major+16024796minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200118T031804Z.40W2V1/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-01-17 6:50 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-01-17 6:50 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
17 Jan 2020 06:09:23 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
17 Jan 2020 06:09:23 UTC: NOTICE : conf_values[options] = {'autoresume', 'snapcache', 'kerncache', 'bindist', 'clear-autoresume', 'pkgcache'}
17 Jan 2020 06:09:24 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
17 Jan 2020 06:09:24 UTC: NOTICE : Using target: livecd-stage2
17 Jan 2020 06:09:24 UTC: NOTICE : Source file specification matching setting is: strict
17 Jan 2020 06:09:24 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
17 Jan 2020 06:09:25 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200117T034405Z.tar.xz
17 Jan 2020 06:09:25 UTC: NOTICE : Removing AutoResume Points ...
17 Jan 2020 06:09:25 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200117T034405Z
17 Jan 2020 06:09:25 UTC: NOTICE : --- Running action sequence: unpack
17 Jan 2020 06:09:25 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
17 Jan 2020 06:09:25 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
17 Jan 2020 06:09:25 UTC: NOTICE : Removing AutoResume Points ...
17 Jan 2020 06:09:25 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200117T034405Z
17 Jan 2020 06:09:25 UTC: NOTICE : Clearing the chroot path ...
17 Jan 2020 06:09:25 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200117T034405Z
17 Jan 2020 06:09:25 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200117T034405Z.tar.xz
17 Jan 2020 06:09:25 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200117T034405Z (this may take some time) ..
17 Jan 2020 06:09:50 UTC: NOTICE : --- Running action sequence: unpack_snapshot
17 Jan 2020 06:09:50 UTC: NOTICE : --- Running action sequence: config_profile_link
17 Jan 2020 06:09:50 UTC: NOTICE : --- Running action sequence: setup_confdir
17 Jan 2020 06:09:50 UTC: NOTICE : --- Running action sequence: portage_overlay
17 Jan 2020 06:09:50 UTC: NOTICE : --- Running action sequence: bind
17 Jan 2020 06:09:50 UTC: NOTICE : --- Running action sequence: chroot_setup
17 Jan 2020 06:09:50 UTC: NOTICE : Setting up chroot...
17 Jan 2020 06:09:50 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
17 Jan 2020 06:09:50 UTC: WARNING : If your build fails look here first as the possible problem.
17 Jan 2020 06:09:50 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
17 Jan 2020 06:09:50 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
17 Jan 2020 06:09:50 UTC: WARNING : You have been warned.
17 Jan 2020 06:09:50 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200117T034405Z/etc/portage/make.conf
17 Jan 2020 06:09:50 UTC: NOTICE : STICKY-CONFIG is enabled
17 Jan 2020 06:09:50 UTC: NOTICE : --- Running action sequence: setup_environment
17 Jan 2020 06:09:50 UTC: NOTICE : --- Running action sequence: run_local
17 Jan 2020 06:09:50 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200117T034405Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200117T034405Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200117T034405Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.2::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200117T034405Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200117T034405Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200117T034405Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200117T034405Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200117T034405Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.2 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.86:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.2^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200117T034405Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200117T034405Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200117T034405Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200117T034405Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200117T034405Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.86-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
17 Jan 2020 06:50:57 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
17 Jan 2020 06:50:57 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
17 Jan 2020 06:50:57 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
17 Jan 2020 06:50:57 UTC: NOTICE : Cleaning up... Running unbind()
17 Jan 2020 06:50:57 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200117T034405Z/tmp/kerncache is not a mount point. Skipping
17 Jan 2020 06:50:57 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200117T034405Z/var/cache/binpkgs is not a mount point. Skipping
17 Jan 2020 06:50:57 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200117T034405Z/run is not a mount point. Skipping
17 Jan 2020 06:50:57 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200117T034405Z/dev/shm does not exist. Skipping
17 Jan 2020 06:50:57 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200117T034405Z/dev/pts does not exist. Skipping
17 Jan 2020 06:50:57 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200117T034405Z/var/tmp/portage is not a mount point. Skipping
17 Jan 2020 06:50:57 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200117T034405Z/var/cache/distfiles is not a mount point. Skipping
17 Jan 2020 06:50:57 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200117T034405Z/var/db/repos/gentoo is not a mount point. Skipping
17 Jan 2020 06:50:57 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200117T034405Z/dev is not a mount point. Skipping
17 Jan 2020 06:50:57 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200117T034405Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4168.94user 184.75system 41:34.31elapsed 174%CPU (0avgtext+0avgdata 232032maxresident)k
0inputs+0outputs (0major+16298946minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200117T034405Z.SR4Sbh/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-01-16 7:05 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-01-16 7:05 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
16 Jan 2020 06:24:32 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
16 Jan 2020 06:24:32 UTC: NOTICE : conf_values[options] = {'pkgcache', 'clear-autoresume', 'autoresume', 'bindist', 'kerncache', 'snapcache'}
16 Jan 2020 06:24:32 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
16 Jan 2020 06:24:32 UTC: NOTICE : Using target: livecd-stage2
16 Jan 2020 06:24:32 UTC: NOTICE : Source file specification matching setting is: strict
16 Jan 2020 06:24:32 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
16 Jan 2020 06:24:33 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200116T031605Z.tar.xz
16 Jan 2020 06:24:33 UTC: NOTICE : Removing AutoResume Points ...
16 Jan 2020 06:24:33 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200116T031605Z
16 Jan 2020 06:24:33 UTC: NOTICE : --- Running action sequence: unpack
16 Jan 2020 06:24:33 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
16 Jan 2020 06:24:33 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
16 Jan 2020 06:24:33 UTC: NOTICE : Removing AutoResume Points ...
16 Jan 2020 06:24:33 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200116T031605Z
16 Jan 2020 06:24:33 UTC: NOTICE : Clearing the chroot path ...
16 Jan 2020 06:24:33 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200116T031605Z
16 Jan 2020 06:24:33 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200116T031605Z.tar.xz
16 Jan 2020 06:24:33 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200116T031605Z (this may take some time) ..
16 Jan 2020 06:24:55 UTC: NOTICE : --- Running action sequence: unpack_snapshot
16 Jan 2020 06:24:55 UTC: NOTICE : --- Running action sequence: config_profile_link
16 Jan 2020 06:24:55 UTC: NOTICE : --- Running action sequence: setup_confdir
16 Jan 2020 06:24:55 UTC: NOTICE : --- Running action sequence: portage_overlay
16 Jan 2020 06:24:55 UTC: NOTICE : --- Running action sequence: bind
16 Jan 2020 06:24:55 UTC: NOTICE : --- Running action sequence: chroot_setup
16 Jan 2020 06:24:55 UTC: NOTICE : Setting up chroot...
16 Jan 2020 06:24:55 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
16 Jan 2020 06:24:55 UTC: WARNING : If your build fails look here first as the possible problem.
16 Jan 2020 06:24:55 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
16 Jan 2020 06:24:55 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
16 Jan 2020 06:24:55 UTC: WARNING : You have been warned.
16 Jan 2020 06:24:55 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200116T031605Z/etc/portage/make.conf
16 Jan 2020 06:24:55 UTC: NOTICE : STICKY-CONFIG is enabled
16 Jan 2020 06:24:55 UTC: NOTICE : --- Running action sequence: setup_environment
16 Jan 2020 06:24:55 UTC: NOTICE : --- Running action sequence: run_local
16 Jan 2020 06:24:55 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200116T031605Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200116T031605Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200116T031605Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200116T031605Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200116T031605Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200116T031605Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200116T031605Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200116T031605Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.1 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.86:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.1^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200116T031605Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200116T031605Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200116T031605Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200116T031605Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200116T031605Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.86-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
16 Jan 2020 07:05:46 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
16 Jan 2020 07:05:46 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
16 Jan 2020 07:05:46 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
16 Jan 2020 07:05:46 UTC: NOTICE : Cleaning up... Running unbind()
16 Jan 2020 07:05:46 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200116T031605Z/tmp/kerncache is not a mount point. Skipping
16 Jan 2020 07:05:46 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200116T031605Z/var/cache/binpkgs is not a mount point. Skipping
16 Jan 2020 07:05:46 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200116T031605Z/run is not a mount point. Skipping
16 Jan 2020 07:05:46 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200116T031605Z/dev/shm does not exist. Skipping
16 Jan 2020 07:05:46 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200116T031605Z/dev/pts does not exist. Skipping
16 Jan 2020 07:05:46 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200116T031605Z/var/tmp/portage is not a mount point. Skipping
16 Jan 2020 07:05:46 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200116T031605Z/var/cache/distfiles is not a mount point. Skipping
16 Jan 2020 07:05:46 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200116T031605Z/var/db/repos/gentoo is not a mount point. Skipping
16 Jan 2020 07:05:46 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200116T031605Z/dev is not a mount point. Skipping
16 Jan 2020 07:05:46 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200116T031605Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4140.60user 178.44system 41:14.19elapsed 174%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (0major+16020102minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200116T031605Z.YRpWVC/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-01-15 6:41 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-01-15 6:41 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
15 Jan 2020 06:01:03 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
15 Jan 2020 06:01:03 UTC: NOTICE : conf_values[options] = {'kerncache', 'snapcache', 'clear-autoresume', 'pkgcache', 'bindist', 'autoresume'}
15 Jan 2020 06:01:03 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
15 Jan 2020 06:01:03 UTC: NOTICE : Using target: livecd-stage2
15 Jan 2020 06:01:03 UTC: NOTICE : Source file specification matching setting is: strict
15 Jan 2020 06:01:03 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
15 Jan 2020 06:01:05 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200115T033606Z.tar.xz
15 Jan 2020 06:01:05 UTC: NOTICE : Removing AutoResume Points ...
15 Jan 2020 06:01:05 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200115T033606Z
15 Jan 2020 06:01:05 UTC: NOTICE : --- Running action sequence: unpack
15 Jan 2020 06:01:05 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
15 Jan 2020 06:01:05 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
15 Jan 2020 06:01:05 UTC: NOTICE : Removing AutoResume Points ...
15 Jan 2020 06:01:05 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200115T033606Z
15 Jan 2020 06:01:05 UTC: NOTICE : Clearing the chroot path ...
15 Jan 2020 06:01:05 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200115T033606Z
15 Jan 2020 06:01:05 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200115T033606Z.tar.xz
15 Jan 2020 06:01:05 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200115T033606Z (this may take some time) ..
15 Jan 2020 06:01:32 UTC: NOTICE : --- Running action sequence: unpack_snapshot
15 Jan 2020 06:01:32 UTC: NOTICE : --- Running action sequence: config_profile_link
15 Jan 2020 06:01:32 UTC: NOTICE : --- Running action sequence: setup_confdir
15 Jan 2020 06:01:32 UTC: NOTICE : --- Running action sequence: portage_overlay
15 Jan 2020 06:01:32 UTC: NOTICE : --- Running action sequence: bind
15 Jan 2020 06:01:32 UTC: NOTICE : --- Running action sequence: chroot_setup
15 Jan 2020 06:01:32 UTC: NOTICE : Setting up chroot...
15 Jan 2020 06:01:32 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
15 Jan 2020 06:01:32 UTC: WARNING : If your build fails look here first as the possible problem.
15 Jan 2020 06:01:32 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
15 Jan 2020 06:01:32 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
15 Jan 2020 06:01:32 UTC: WARNING : You have been warned.
15 Jan 2020 06:01:32 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200115T033606Z/etc/portage/make.conf
15 Jan 2020 06:01:32 UTC: NOTICE : STICKY-CONFIG is enabled
15 Jan 2020 06:01:32 UTC: NOTICE : --- Running action sequence: setup_environment
15 Jan 2020 06:01:32 UTC: NOTICE : --- Running action sequence: run_local
15 Jan 2020 06:01:32 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200115T033606Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200115T033606Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200115T033606Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200115T033606Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200115T033606Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200115T033606Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200115T033606Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200115T033606Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.1 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.86:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.1^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200115T033606Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200115T033606Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200115T033606Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200115T033606Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200115T033606Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.86-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
15 Jan 2020 06:41:39 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
15 Jan 2020 06:41:40 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
15 Jan 2020 06:41:40 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
15 Jan 2020 06:41:40 UTC: NOTICE : Cleaning up... Running unbind()
15 Jan 2020 06:41:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200115T033606Z/tmp/kerncache is not a mount point. Skipping
15 Jan 2020 06:41:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200115T033606Z/var/cache/binpkgs is not a mount point. Skipping
15 Jan 2020 06:41:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200115T033606Z/run is not a mount point. Skipping
15 Jan 2020 06:41:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200115T033606Z/dev/shm does not exist. Skipping
15 Jan 2020 06:41:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200115T033606Z/dev/pts does not exist. Skipping
15 Jan 2020 06:41:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200115T033606Z/var/tmp/portage is not a mount point. Skipping
15 Jan 2020 06:41:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200115T033606Z/var/cache/distfiles is not a mount point. Skipping
15 Jan 2020 06:41:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200115T033606Z/var/db/repos/gentoo is not a mount point. Skipping
15 Jan 2020 06:41:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200115T033606Z/dev is not a mount point. Skipping
15 Jan 2020 06:41:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200115T033606Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4132.38user 178.82system 40:36.68elapsed 176%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (0major+16020432minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200115T033606Z.Q3rcHP/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-01-14 6:36 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-01-14 6:36 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
14 Jan 2020 05:55:22 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
14 Jan 2020 05:55:22 UTC: NOTICE : conf_values[options] = {'kerncache', 'pkgcache', 'bindist', 'autoresume', 'snapcache', 'clear-autoresume'}
14 Jan 2020 05:55:22 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
14 Jan 2020 05:55:22 UTC: NOTICE : Using target: livecd-stage2
14 Jan 2020 05:55:22 UTC: NOTICE : Source file specification matching setting is: strict
14 Jan 2020 05:55:22 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
14 Jan 2020 05:55:24 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200114T032303Z.tar.xz
14 Jan 2020 05:55:24 UTC: NOTICE : Removing AutoResume Points ...
14 Jan 2020 05:55:24 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200114T032303Z
14 Jan 2020 05:55:24 UTC: NOTICE : --- Running action sequence: unpack
14 Jan 2020 05:55:24 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
14 Jan 2020 05:55:24 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
14 Jan 2020 05:55:24 UTC: NOTICE : Removing AutoResume Points ...
14 Jan 2020 05:55:24 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200114T032303Z
14 Jan 2020 05:55:24 UTC: NOTICE : Clearing the chroot path ...
14 Jan 2020 05:55:24 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200114T032303Z
14 Jan 2020 05:55:24 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200114T032303Z.tar.xz
14 Jan 2020 05:55:24 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200114T032303Z (this may take some time) ..
14 Jan 2020 05:55:47 UTC: NOTICE : --- Running action sequence: unpack_snapshot
14 Jan 2020 05:55:47 UTC: NOTICE : --- Running action sequence: config_profile_link
14 Jan 2020 05:55:47 UTC: NOTICE : --- Running action sequence: setup_confdir
14 Jan 2020 05:55:47 UTC: NOTICE : --- Running action sequence: portage_overlay
14 Jan 2020 05:55:47 UTC: NOTICE : --- Running action sequence: bind
14 Jan 2020 05:55:47 UTC: NOTICE : --- Running action sequence: chroot_setup
14 Jan 2020 05:55:47 UTC: NOTICE : Setting up chroot...
14 Jan 2020 05:55:47 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
14 Jan 2020 05:55:47 UTC: WARNING : If your build fails look here first as the possible problem.
14 Jan 2020 05:55:47 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
14 Jan 2020 05:55:47 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
14 Jan 2020 05:55:47 UTC: WARNING : You have been warned.
14 Jan 2020 05:55:47 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200114T032303Z/etc/portage/make.conf
14 Jan 2020 05:55:47 UTC: NOTICE : STICKY-CONFIG is enabled
14 Jan 2020 05:55:47 UTC: NOTICE : --- Running action sequence: setup_environment
14 Jan 2020 05:55:47 UTC: NOTICE : --- Running action sequence: run_local
14 Jan 2020 05:55:47 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200114T032303Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200114T032303Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200114T032303Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200114T032303Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200114T032303Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200114T032303Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200114T032303Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200114T032303Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.1 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 1) sys-devel/bc-1.06.95-r2::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.86:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.1^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200114T032303Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200114T032303Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200114T032303Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200114T032303Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200114T032303Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.86-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
14 Jan 2020 06:36:33 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
14 Jan 2020 06:36:33 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
14 Jan 2020 06:36:33 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
14 Jan 2020 06:36:33 UTC: NOTICE : Cleaning up... Running unbind()
14 Jan 2020 06:36:33 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200114T032303Z/tmp/kerncache is not a mount point. Skipping
14 Jan 2020 06:36:33 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200114T032303Z/var/cache/binpkgs is not a mount point. Skipping
14 Jan 2020 06:36:33 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200114T032303Z/run is not a mount point. Skipping
14 Jan 2020 06:36:33 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200114T032303Z/dev/shm does not exist. Skipping
14 Jan 2020 06:36:33 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200114T032303Z/dev/pts does not exist. Skipping
14 Jan 2020 06:36:33 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200114T032303Z/var/tmp/portage is not a mount point. Skipping
14 Jan 2020 06:36:33 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200114T032303Z/var/cache/distfiles is not a mount point. Skipping
14 Jan 2020 06:36:33 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200114T032303Z/var/db/repos/gentoo is not a mount point. Skipping
14 Jan 2020 06:36:33 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200114T032303Z/dev is not a mount point. Skipping
14 Jan 2020 06:36:33 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200114T032303Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4131.56user 178.28system 41:11.41elapsed 174%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (0major+16019350minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200114T032303Z.ptUZk5/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-01-11 6:29 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-01-11 6:29 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
11 Jan 2020 05:47:32 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
11 Jan 2020 05:47:32 UTC: NOTICE : conf_values[options] = {'autoresume', 'pkgcache', 'clear-autoresume', 'kerncache', 'bindist', 'snapcache'}
11 Jan 2020 05:47:32 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
11 Jan 2020 05:47:32 UTC: NOTICE : Using target: livecd-stage2
11 Jan 2020 05:47:32 UTC: NOTICE : Source file specification matching setting is: strict
11 Jan 2020 05:47:32 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
11 Jan 2020 05:47:33 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200111T033403Z.tar.xz
11 Jan 2020 05:47:34 UTC: NOTICE : Removing AutoResume Points ...
11 Jan 2020 05:47:34 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200111T033403Z
11 Jan 2020 05:47:34 UTC: NOTICE : --- Running action sequence: unpack
11 Jan 2020 05:47:34 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
11 Jan 2020 05:47:34 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
11 Jan 2020 05:47:34 UTC: NOTICE : Removing AutoResume Points ...
11 Jan 2020 05:47:34 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200111T033403Z
11 Jan 2020 05:47:34 UTC: NOTICE : Clearing the chroot path ...
11 Jan 2020 05:47:34 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200111T033403Z
11 Jan 2020 05:47:34 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200111T033403Z.tar.xz
11 Jan 2020 05:47:34 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200111T033403Z (this may take some time) ..
11 Jan 2020 05:47:50 UTC: NOTICE : --- Running action sequence: unpack_snapshot
11 Jan 2020 05:47:50 UTC: NOTICE : --- Running action sequence: config_profile_link
11 Jan 2020 05:47:50 UTC: NOTICE : --- Running action sequence: setup_confdir
11 Jan 2020 05:47:50 UTC: NOTICE : --- Running action sequence: portage_overlay
11 Jan 2020 05:47:50 UTC: NOTICE : --- Running action sequence: bind
11 Jan 2020 05:47:50 UTC: NOTICE : --- Running action sequence: chroot_setup
11 Jan 2020 05:47:50 UTC: NOTICE : Setting up chroot...
11 Jan 2020 05:47:50 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
11 Jan 2020 05:47:50 UTC: WARNING : If your build fails look here first as the possible problem.
11 Jan 2020 05:47:50 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
11 Jan 2020 05:47:50 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
11 Jan 2020 05:47:50 UTC: WARNING : You have been warned.
11 Jan 2020 05:47:50 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200111T033403Z/etc/portage/make.conf
11 Jan 2020 05:47:50 UTC: NOTICE : STICKY-CONFIG is enabled
11 Jan 2020 05:47:50 UTC: NOTICE : --- Running action sequence: setup_environment
11 Jan 2020 05:47:50 UTC: NOTICE : --- Running action sequence: run_local
11 Jan 2020 05:47:50 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200111T033403Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200111T033403Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200111T033403Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200111T033403Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200111T033403Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200111T033403Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200111T033403Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200111T033403Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.1 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (3 of 3) virtual/libelf-3::gentoo
>>> Installing (3 of 3) virtual/libelf-3::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.86:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.1^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200111T033403Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200111T033403Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200111T033403Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200111T033403Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200111T033403Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.86-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
11 Jan 2020 06:29:55 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
11 Jan 2020 06:29:56 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
11 Jan 2020 06:29:56 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
11 Jan 2020 06:29:56 UTC: NOTICE : Cleaning up... Running unbind()
11 Jan 2020 06:29:56 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200111T033403Z/tmp/kerncache is not a mount point. Skipping
11 Jan 2020 06:29:56 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200111T033403Z/var/cache/binpkgs is not a mount point. Skipping
11 Jan 2020 06:29:56 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200111T033403Z/run is not a mount point. Skipping
11 Jan 2020 06:29:56 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200111T033403Z/dev/shm does not exist. Skipping
11 Jan 2020 06:29:56 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200111T033403Z/dev/pts does not exist. Skipping
11 Jan 2020 06:29:56 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200111T033403Z/var/tmp/portage is not a mount point. Skipping
11 Jan 2020 06:29:56 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200111T033403Z/var/cache/distfiles is not a mount point. Skipping
11 Jan 2020 06:29:56 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200111T033403Z/var/db/repos/gentoo is not a mount point. Skipping
11 Jan 2020 06:29:56 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200111T033403Z/dev is not a mount point. Skipping
11 Jan 2020 06:29:56 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200111T033403Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4422.04user 215.95system 42:23.94elapsed 182%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (0major+19615394minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200111T033403Z.U8EcOp/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-01-10 6:33 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-01-10 6:33 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
10 Jan 2020 05:51:41 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
10 Jan 2020 05:51:41 UTC: NOTICE : conf_values[options] = {'pkgcache', 'clear-autoresume', 'snapcache', 'autoresume', 'kerncache', 'bindist'}
10 Jan 2020 05:51:41 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
10 Jan 2020 05:51:41 UTC: NOTICE : Using target: livecd-stage2
10 Jan 2020 05:51:41 UTC: NOTICE : Source file specification matching setting is: strict
10 Jan 2020 05:51:41 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
10 Jan 2020 05:51:42 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200110T032504Z.tar.xz
10 Jan 2020 05:51:42 UTC: NOTICE : Removing AutoResume Points ...
10 Jan 2020 05:51:42 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200110T032504Z
10 Jan 2020 05:51:42 UTC: NOTICE : --- Running action sequence: unpack
10 Jan 2020 05:51:42 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
10 Jan 2020 05:51:42 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
10 Jan 2020 05:51:42 UTC: NOTICE : Removing AutoResume Points ...
10 Jan 2020 05:51:42 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200110T032504Z
10 Jan 2020 05:51:42 UTC: NOTICE : Clearing the chroot path ...
10 Jan 2020 05:51:42 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200110T032504Z
10 Jan 2020 05:51:42 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200110T032504Z.tar.xz
10 Jan 2020 05:51:42 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200110T032504Z (this may take some time) ..
10 Jan 2020 05:51:59 UTC: NOTICE : --- Running action sequence: unpack_snapshot
10 Jan 2020 05:51:59 UTC: NOTICE : --- Running action sequence: config_profile_link
10 Jan 2020 05:51:59 UTC: NOTICE : --- Running action sequence: setup_confdir
10 Jan 2020 05:51:59 UTC: NOTICE : --- Running action sequence: portage_overlay
10 Jan 2020 05:51:59 UTC: NOTICE : --- Running action sequence: bind
10 Jan 2020 05:51:59 UTC: NOTICE : --- Running action sequence: chroot_setup
10 Jan 2020 05:51:59 UTC: NOTICE : Setting up chroot...
10 Jan 2020 05:51:59 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
10 Jan 2020 05:51:59 UTC: WARNING : If your build fails look here first as the possible problem.
10 Jan 2020 05:51:59 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
10 Jan 2020 05:51:59 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
10 Jan 2020 05:51:59 UTC: WARNING : You have been warned.
10 Jan 2020 05:51:59 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200110T032504Z/etc/portage/make.conf
10 Jan 2020 05:51:59 UTC: NOTICE : STICKY-CONFIG is enabled
10 Jan 2020 05:51:59 UTC: NOTICE : --- Running action sequence: setup_environment
10 Jan 2020 05:51:59 UTC: NOTICE : --- Running action sequence: run_local
10 Jan 2020 05:51:59 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200110T032504Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200110T032504Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200110T032504Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200110T032504Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200110T032504Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200110T032504Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200110T032504Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200110T032504Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.1 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (3 of 3) virtual/libelf-3::gentoo
>>> Installing (3 of 3) virtual/libelf-3::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.86:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.1^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200110T032504Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200110T032504Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200110T032504Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200110T032504Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200110T032504Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.86-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
10 Jan 2020 06:33:43 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
10 Jan 2020 06:33:43 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
10 Jan 2020 06:33:43 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
10 Jan 2020 06:33:43 UTC: NOTICE : Cleaning up... Running unbind()
10 Jan 2020 06:33:43 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200110T032504Z/tmp/kerncache is not a mount point. Skipping
10 Jan 2020 06:33:43 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200110T032504Z/var/cache/binpkgs is not a mount point. Skipping
10 Jan 2020 06:33:43 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200110T032504Z/run is not a mount point. Skipping
10 Jan 2020 06:33:43 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200110T032504Z/dev/shm does not exist. Skipping
10 Jan 2020 06:33:43 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200110T032504Z/dev/pts does not exist. Skipping
10 Jan 2020 06:33:43 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200110T032504Z/var/tmp/portage is not a mount point. Skipping
10 Jan 2020 06:33:43 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200110T032504Z/var/cache/distfiles is not a mount point. Skipping
10 Jan 2020 06:33:43 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200110T032504Z/var/db/repos/gentoo is not a mount point. Skipping
10 Jan 2020 06:33:43 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200110T032504Z/dev is not a mount point. Skipping
10 Jan 2020 06:33:43 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200110T032504Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4411.88user 214.90system 42:02.68elapsed 183%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (3major+19616781minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200110T032504Z.JMRSg6/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-01-09 6:46 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-01-09 6:46 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
09 Jan 2020 06:04:15 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
09 Jan 2020 06:04:15 UTC: NOTICE : conf_values[options] = {'bindist', 'snapcache', 'clear-autoresume', 'kerncache', 'autoresume', 'pkgcache'}
09 Jan 2020 06:04:15 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
09 Jan 2020 06:04:15 UTC: NOTICE : Using target: livecd-stage2
09 Jan 2020 06:04:15 UTC: NOTICE : Source file specification matching setting is: strict
09 Jan 2020 06:04:15 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
09 Jan 2020 06:04:17 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200109T034205Z.tar.xz
09 Jan 2020 06:04:17 UTC: NOTICE : Removing AutoResume Points ...
09 Jan 2020 06:04:17 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200109T034205Z
09 Jan 2020 06:04:17 UTC: NOTICE : --- Running action sequence: unpack
09 Jan 2020 06:04:17 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
09 Jan 2020 06:04:17 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
09 Jan 2020 06:04:17 UTC: NOTICE : Removing AutoResume Points ...
09 Jan 2020 06:04:17 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200109T034205Z
09 Jan 2020 06:04:17 UTC: NOTICE : Clearing the chroot path ...
09 Jan 2020 06:04:17 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200109T034205Z
09 Jan 2020 06:04:17 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200109T034205Z.tar.xz
09 Jan 2020 06:04:17 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200109T034205Z (this may take some time) ..
09 Jan 2020 06:04:34 UTC: NOTICE : --- Running action sequence: unpack_snapshot
09 Jan 2020 06:04:34 UTC: NOTICE : --- Running action sequence: config_profile_link
09 Jan 2020 06:04:34 UTC: NOTICE : --- Running action sequence: setup_confdir
09 Jan 2020 06:04:34 UTC: NOTICE : --- Running action sequence: portage_overlay
09 Jan 2020 06:04:34 UTC: NOTICE : --- Running action sequence: bind
09 Jan 2020 06:04:34 UTC: NOTICE : --- Running action sequence: chroot_setup
09 Jan 2020 06:04:34 UTC: NOTICE : Setting up chroot...
09 Jan 2020 06:04:34 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
09 Jan 2020 06:04:34 UTC: WARNING : If your build fails look here first as the possible problem.
09 Jan 2020 06:04:34 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
09 Jan 2020 06:04:34 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
09 Jan 2020 06:04:34 UTC: WARNING : You have been warned.
09 Jan 2020 06:04:34 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200109T034205Z/etc/portage/make.conf
09 Jan 2020 06:04:34 UTC: NOTICE : STICKY-CONFIG is enabled
09 Jan 2020 06:04:34 UTC: NOTICE : --- Running action sequence: setup_environment
09 Jan 2020 06:04:34 UTC: NOTICE : --- Running action sequence: run_local
09 Jan 2020 06:04:34 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200109T034205Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200109T034205Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200109T034205Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200109T034205Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200109T034205Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200109T034205Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200109T034205Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200109T034205Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.1 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (3 of 3) virtual/libelf-3::gentoo
>>> Installing (3 of 3) virtual/libelf-3::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.86:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.1^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200109T034205Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200109T034205Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200109T034205Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200109T034205Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200109T034205Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.86-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
09 Jan 2020 06:46:29 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
09 Jan 2020 06:46:29 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
09 Jan 2020 06:46:29 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
09 Jan 2020 06:46:29 UTC: NOTICE : Cleaning up... Running unbind()
09 Jan 2020 06:46:29 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200109T034205Z/tmp/kerncache is not a mount point. Skipping
09 Jan 2020 06:46:29 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200109T034205Z/var/cache/binpkgs is not a mount point. Skipping
09 Jan 2020 06:46:29 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200109T034205Z/run is not a mount point. Skipping
09 Jan 2020 06:46:29 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200109T034205Z/dev/shm does not exist. Skipping
09 Jan 2020 06:46:29 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200109T034205Z/dev/pts does not exist. Skipping
09 Jan 2020 06:46:29 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200109T034205Z/var/tmp/portage is not a mount point. Skipping
09 Jan 2020 06:46:29 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200109T034205Z/var/cache/distfiles is not a mount point. Skipping
09 Jan 2020 06:46:29 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200109T034205Z/var/db/repos/gentoo is not a mount point. Skipping
09 Jan 2020 06:46:29 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200109T034205Z/dev is not a mount point. Skipping
09 Jan 2020 06:46:29 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200109T034205Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4412.70user 209.05system 42:14.58elapsed 182%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (0major+19614442minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200109T034205Z.UFhG2R/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-01-08 6:38 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-01-08 6:38 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
08 Jan 2020 05:55:43 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
08 Jan 2020 05:55:43 UTC: NOTICE : conf_values[options] = {'kerncache', 'clear-autoresume', 'bindist', 'autoresume', 'pkgcache', 'snapcache'}
08 Jan 2020 05:55:43 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
08 Jan 2020 05:55:43 UTC: NOTICE : Using target: livecd-stage2
08 Jan 2020 05:55:43 UTC: NOTICE : Source file specification matching setting is: strict
08 Jan 2020 05:55:43 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
08 Jan 2020 05:55:45 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200108T033206Z.tar.xz
08 Jan 2020 05:55:45 UTC: NOTICE : Removing AutoResume Points ...
08 Jan 2020 05:55:45 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200108T033206Z
08 Jan 2020 05:55:45 UTC: NOTICE : --- Running action sequence: unpack
08 Jan 2020 05:55:45 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
08 Jan 2020 05:55:45 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
08 Jan 2020 05:55:45 UTC: NOTICE : Removing AutoResume Points ...
08 Jan 2020 05:55:45 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200108T033206Z
08 Jan 2020 05:55:45 UTC: NOTICE : Clearing the chroot path ...
08 Jan 2020 05:55:45 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200108T033206Z
08 Jan 2020 05:55:45 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200108T033206Z.tar.xz
08 Jan 2020 05:55:45 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200108T033206Z (this may take some time) ..
08 Jan 2020 05:56:04 UTC: NOTICE : --- Running action sequence: unpack_snapshot
08 Jan 2020 05:56:04 UTC: NOTICE : --- Running action sequence: config_profile_link
08 Jan 2020 05:56:04 UTC: NOTICE : --- Running action sequence: setup_confdir
08 Jan 2020 05:56:04 UTC: NOTICE : --- Running action sequence: portage_overlay
08 Jan 2020 05:56:04 UTC: NOTICE : --- Running action sequence: bind
08 Jan 2020 05:56:04 UTC: NOTICE : --- Running action sequence: chroot_setup
08 Jan 2020 05:56:04 UTC: NOTICE : Setting up chroot...
08 Jan 2020 05:56:04 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
08 Jan 2020 05:56:04 UTC: WARNING : If your build fails look here first as the possible problem.
08 Jan 2020 05:56:04 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
08 Jan 2020 05:56:04 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
08 Jan 2020 05:56:04 UTC: WARNING : You have been warned.
08 Jan 2020 05:56:04 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200108T033206Z/etc/portage/make.conf
08 Jan 2020 05:56:04 UTC: NOTICE : STICKY-CONFIG is enabled
08 Jan 2020 05:56:04 UTC: NOTICE : --- Running action sequence: setup_environment
08 Jan 2020 05:56:04 UTC: NOTICE : --- Running action sequence: run_local
08 Jan 2020 05:56:04 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200108T033206Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200108T033206Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200108T033206Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200108T033206Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200108T033206Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200108T033206Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200108T033206Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200108T033206Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.1 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (3 of 3) virtual/libelf-3::gentoo
>>> Installing (3 of 3) virtual/libelf-3::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.86:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.1^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200108T033206Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200108T033206Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200108T033206Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200108T033206Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200108T033206Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.86-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
08 Jan 2020 06:38:04 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
08 Jan 2020 06:38:05 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
08 Jan 2020 06:38:05 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
08 Jan 2020 06:38:05 UTC: NOTICE : Cleaning up... Running unbind()
08 Jan 2020 06:38:05 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200108T033206Z/tmp/kerncache is not a mount point. Skipping
08 Jan 2020 06:38:05 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200108T033206Z/var/cache/binpkgs is not a mount point. Skipping
08 Jan 2020 06:38:05 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200108T033206Z/run is not a mount point. Skipping
08 Jan 2020 06:38:05 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200108T033206Z/dev/shm does not exist. Skipping
08 Jan 2020 06:38:05 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200108T033206Z/dev/pts does not exist. Skipping
08 Jan 2020 06:38:05 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200108T033206Z/var/tmp/portage is not a mount point. Skipping
08 Jan 2020 06:38:05 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200108T033206Z/var/cache/distfiles is not a mount point. Skipping
08 Jan 2020 06:38:05 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200108T033206Z/var/db/repos/gentoo is not a mount point. Skipping
08 Jan 2020 06:38:05 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200108T033206Z/dev is not a mount point. Skipping
08 Jan 2020 06:38:05 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200108T033206Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4409.45user 215.94system 42:21.71elapsed 181%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (0major+19612929minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200108T033206Z.WmsRQD/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-01-07 6:10 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-01-07 6:10 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
07 Jan 2020 05:28:23 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
07 Jan 2020 05:28:23 UTC: NOTICE : conf_values[options] = {'kerncache', 'autoresume', 'clear-autoresume', 'pkgcache', 'snapcache', 'bindist'}
07 Jan 2020 05:28:23 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
07 Jan 2020 05:28:23 UTC: NOTICE : Using target: livecd-stage2
07 Jan 2020 05:28:23 UTC: NOTICE : Source file specification matching setting is: strict
07 Jan 2020 05:28:23 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
07 Jan 2020 05:28:24 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200107T031107Z.tar.xz
07 Jan 2020 05:28:24 UTC: NOTICE : Removing AutoResume Points ...
07 Jan 2020 05:28:24 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200107T031107Z
07 Jan 2020 05:28:24 UTC: NOTICE : --- Running action sequence: unpack
07 Jan 2020 05:28:24 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
07 Jan 2020 05:28:24 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
07 Jan 2020 05:28:24 UTC: NOTICE : Removing AutoResume Points ...
07 Jan 2020 05:28:24 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200107T031107Z
07 Jan 2020 05:28:24 UTC: NOTICE : Clearing the chroot path ...
07 Jan 2020 05:28:24 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200107T031107Z
07 Jan 2020 05:28:24 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200107T031107Z.tar.xz
07 Jan 2020 05:28:24 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200107T031107Z (this may take some time) ..
07 Jan 2020 05:28:42 UTC: NOTICE : --- Running action sequence: unpack_snapshot
07 Jan 2020 05:28:42 UTC: NOTICE : --- Running action sequence: config_profile_link
07 Jan 2020 05:28:42 UTC: NOTICE : --- Running action sequence: setup_confdir
07 Jan 2020 05:28:42 UTC: NOTICE : --- Running action sequence: portage_overlay
07 Jan 2020 05:28:42 UTC: NOTICE : --- Running action sequence: bind
07 Jan 2020 05:28:42 UTC: NOTICE : --- Running action sequence: chroot_setup
07 Jan 2020 05:28:42 UTC: NOTICE : Setting up chroot...
07 Jan 2020 05:28:42 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
07 Jan 2020 05:28:42 UTC: WARNING : If your build fails look here first as the possible problem.
07 Jan 2020 05:28:42 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
07 Jan 2020 05:28:42 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
07 Jan 2020 05:28:42 UTC: WARNING : You have been warned.
07 Jan 2020 05:28:42 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200107T031107Z/etc/portage/make.conf
07 Jan 2020 05:28:42 UTC: NOTICE : STICKY-CONFIG is enabled
07 Jan 2020 05:28:42 UTC: NOTICE : --- Running action sequence: setup_environment
07 Jan 2020 05:28:42 UTC: NOTICE : --- Running action sequence: run_local
07 Jan 2020 05:28:42 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200107T031107Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200107T031107Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200107T031107Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200107T031107Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200107T031107Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200107T031107Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200107T031107Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200107T031107Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.1 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (3 of 3) virtual/libelf-3::gentoo
>>> Installing (3 of 3) virtual/libelf-3::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.86:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.1^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200107T031107Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200107T031107Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200107T031107Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200107T031107Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200107T031107Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.86-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
07 Jan 2020 06:10:40 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
07 Jan 2020 06:10:40 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
07 Jan 2020 06:10:40 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
07 Jan 2020 06:10:40 UTC: NOTICE : Cleaning up... Running unbind()
07 Jan 2020 06:10:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200107T031107Z/tmp/kerncache is not a mount point. Skipping
07 Jan 2020 06:10:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200107T031107Z/var/cache/binpkgs is not a mount point. Skipping
07 Jan 2020 06:10:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200107T031107Z/run is not a mount point. Skipping
07 Jan 2020 06:10:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200107T031107Z/dev/shm does not exist. Skipping
07 Jan 2020 06:10:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200107T031107Z/dev/pts does not exist. Skipping
07 Jan 2020 06:10:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200107T031107Z/var/tmp/portage is not a mount point. Skipping
07 Jan 2020 06:10:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200107T031107Z/var/cache/distfiles is not a mount point. Skipping
07 Jan 2020 06:10:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200107T031107Z/var/db/repos/gentoo is not a mount point. Skipping
07 Jan 2020 06:10:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200107T031107Z/dev is not a mount point. Skipping
07 Jan 2020 06:10:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200107T031107Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4416.93user 215.28system 42:17.96elapsed 182%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (0major+19616738minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200107T031107Z.sUV7hv/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-01-06 6:36 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-01-06 6:36 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
06 Jan 2020 05:54:25 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
06 Jan 2020 05:54:25 UTC: NOTICE : conf_values[options] = {'snapcache', 'clear-autoresume', 'pkgcache', 'bindist', 'kerncache', 'autoresume'}
06 Jan 2020 05:54:25 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
06 Jan 2020 05:54:26 UTC: NOTICE : Using target: livecd-stage2
06 Jan 2020 05:54:26 UTC: NOTICE : Source file specification matching setting is: strict
06 Jan 2020 05:54:26 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
06 Jan 2020 05:54:27 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200106T032704Z.tar.xz
06 Jan 2020 05:54:27 UTC: NOTICE : Removing AutoResume Points ...
06 Jan 2020 05:54:27 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200106T032704Z
06 Jan 2020 05:54:27 UTC: NOTICE : --- Running action sequence: unpack
06 Jan 2020 05:54:27 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
06 Jan 2020 05:54:27 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
06 Jan 2020 05:54:27 UTC: NOTICE : Removing AutoResume Points ...
06 Jan 2020 05:54:27 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200106T032704Z
06 Jan 2020 05:54:27 UTC: NOTICE : Clearing the chroot path ...
06 Jan 2020 05:54:27 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200106T032704Z
06 Jan 2020 05:54:27 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200106T032704Z.tar.xz
06 Jan 2020 05:54:27 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200106T032704Z (this may take some time) ..
06 Jan 2020 05:54:44 UTC: NOTICE : --- Running action sequence: unpack_snapshot
06 Jan 2020 05:54:44 UTC: NOTICE : --- Running action sequence: config_profile_link
06 Jan 2020 05:54:44 UTC: NOTICE : --- Running action sequence: setup_confdir
06 Jan 2020 05:54:44 UTC: NOTICE : --- Running action sequence: portage_overlay
06 Jan 2020 05:54:44 UTC: NOTICE : --- Running action sequence: bind
06 Jan 2020 05:54:44 UTC: NOTICE : --- Running action sequence: chroot_setup
06 Jan 2020 05:54:44 UTC: NOTICE : Setting up chroot...
06 Jan 2020 05:54:44 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
06 Jan 2020 05:54:44 UTC: WARNING : If your build fails look here first as the possible problem.
06 Jan 2020 05:54:44 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
06 Jan 2020 05:54:44 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
06 Jan 2020 05:54:44 UTC: WARNING : You have been warned.
06 Jan 2020 05:54:44 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200106T032704Z/etc/portage/make.conf
06 Jan 2020 05:54:44 UTC: NOTICE : STICKY-CONFIG is enabled
06 Jan 2020 05:54:44 UTC: NOTICE : --- Running action sequence: setup_environment
06 Jan 2020 05:54:44 UTC: NOTICE : --- Running action sequence: run_local
06 Jan 2020 05:54:44 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200106T032704Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200106T032704Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200106T032704Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200106T032704Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200106T032704Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200106T032704Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200106T032704Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200106T032704Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.1 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (3 of 3) virtual/libelf-3::gentoo
>>> Installing (3 of 3) virtual/libelf-3::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.86:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.1^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200106T032704Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200106T032704Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200106T032704Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200106T032704Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200106T032704Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.86-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
06 Jan 2020 06:36:29 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
06 Jan 2020 06:36:29 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
06 Jan 2020 06:36:29 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
06 Jan 2020 06:36:29 UTC: NOTICE : Cleaning up... Running unbind()
06 Jan 2020 06:36:29 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200106T032704Z/tmp/kerncache is not a mount point. Skipping
06 Jan 2020 06:36:29 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200106T032704Z/var/cache/binpkgs is not a mount point. Skipping
06 Jan 2020 06:36:29 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200106T032704Z/run is not a mount point. Skipping
06 Jan 2020 06:36:29 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200106T032704Z/dev/shm does not exist. Skipping
06 Jan 2020 06:36:29 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200106T032704Z/dev/pts does not exist. Skipping
06 Jan 2020 06:36:29 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200106T032704Z/var/tmp/portage is not a mount point. Skipping
06 Jan 2020 06:36:29 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200106T032704Z/var/cache/distfiles is not a mount point. Skipping
06 Jan 2020 06:36:29 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200106T032704Z/var/db/repos/gentoo is not a mount point. Skipping
06 Jan 2020 06:36:29 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200106T032704Z/dev is not a mount point. Skipping
06 Jan 2020 06:36:29 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200106T032704Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4409.82user 215.26system 42:04.30elapsed 183%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (0major+19611812minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200106T032704Z.09XhLQ/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-01-05 6:31 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-01-05 6:31 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
05 Jan 2020 05:48:57 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
05 Jan 2020 05:48:57 UTC: NOTICE : conf_values[options] = {'snapcache', 'kerncache', 'autoresume', 'clear-autoresume', 'bindist', 'pkgcache'}
05 Jan 2020 05:48:58 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
05 Jan 2020 05:48:58 UTC: NOTICE : Using target: livecd-stage2
05 Jan 2020 05:48:58 UTC: NOTICE : Source file specification matching setting is: strict
05 Jan 2020 05:48:58 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
05 Jan 2020 05:48:59 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200105T033405Z.tar.xz
05 Jan 2020 05:48:59 UTC: NOTICE : Removing AutoResume Points ...
05 Jan 2020 05:48:59 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200105T033405Z
05 Jan 2020 05:48:59 UTC: NOTICE : --- Running action sequence: unpack
05 Jan 2020 05:48:59 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
05 Jan 2020 05:48:59 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
05 Jan 2020 05:48:59 UTC: NOTICE : Removing AutoResume Points ...
05 Jan 2020 05:48:59 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200105T033405Z
05 Jan 2020 05:48:59 UTC: NOTICE : Clearing the chroot path ...
05 Jan 2020 05:48:59 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200105T033405Z
05 Jan 2020 05:48:59 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200105T033405Z.tar.xz
05 Jan 2020 05:48:59 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200105T033405Z (this may take some time) ..
05 Jan 2020 05:49:16 UTC: NOTICE : --- Running action sequence: unpack_snapshot
05 Jan 2020 05:49:16 UTC: NOTICE : --- Running action sequence: config_profile_link
05 Jan 2020 05:49:16 UTC: NOTICE : --- Running action sequence: setup_confdir
05 Jan 2020 05:49:16 UTC: NOTICE : --- Running action sequence: portage_overlay
05 Jan 2020 05:49:16 UTC: NOTICE : --- Running action sequence: bind
05 Jan 2020 05:49:16 UTC: NOTICE : --- Running action sequence: chroot_setup
05 Jan 2020 05:49:16 UTC: NOTICE : Setting up chroot...
05 Jan 2020 05:49:16 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
05 Jan 2020 05:49:16 UTC: WARNING : If your build fails look here first as the possible problem.
05 Jan 2020 05:49:16 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
05 Jan 2020 05:49:16 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
05 Jan 2020 05:49:16 UTC: WARNING : You have been warned.
05 Jan 2020 05:49:16 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200105T033405Z/etc/portage/make.conf
05 Jan 2020 05:49:16 UTC: NOTICE : STICKY-CONFIG is enabled
05 Jan 2020 05:49:16 UTC: NOTICE : --- Running action sequence: setup_environment
05 Jan 2020 05:49:16 UTC: NOTICE : --- Running action sequence: run_local
05 Jan 2020 05:49:16 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200105T033405Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200105T033405Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200105T033405Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200105T033405Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200105T033405Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200105T033405Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200105T033405Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200105T033405Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.1 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (3 of 3) virtual/libelf-3::gentoo
>>> Installing (3 of 3) virtual/libelf-3::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.86:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.1^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200105T033405Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200105T033405Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200105T033405Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200105T033405Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200105T033405Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.86-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
05 Jan 2020 06:31:09 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
05 Jan 2020 06:31:10 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
05 Jan 2020 06:31:10 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
05 Jan 2020 06:31:10 UTC: NOTICE : Cleaning up... Running unbind()
05 Jan 2020 06:31:10 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200105T033405Z/tmp/kerncache is not a mount point. Skipping
05 Jan 2020 06:31:10 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200105T033405Z/var/cache/binpkgs is not a mount point. Skipping
05 Jan 2020 06:31:10 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200105T033405Z/run is not a mount point. Skipping
05 Jan 2020 06:31:10 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200105T033405Z/dev/shm does not exist. Skipping
05 Jan 2020 06:31:10 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200105T033405Z/dev/pts does not exist. Skipping
05 Jan 2020 06:31:10 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200105T033405Z/var/tmp/portage is not a mount point. Skipping
05 Jan 2020 06:31:10 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200105T033405Z/var/cache/distfiles is not a mount point. Skipping
05 Jan 2020 06:31:10 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200105T033405Z/var/db/repos/gentoo is not a mount point. Skipping
05 Jan 2020 06:31:10 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200105T033405Z/dev is not a mount point. Skipping
05 Jan 2020 06:31:10 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200105T033405Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4407.05user 214.12system 42:12.58elapsed 182%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (0major+19615530minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200105T033405Z.24011E/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-01-04 6:50 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-01-04 6:50 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
04 Jan 2020 06:08:09 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
04 Jan 2020 06:08:09 UTC: NOTICE : conf_values[options] = {'snapcache', 'clear-autoresume', 'pkgcache', 'autoresume', 'bindist', 'kerncache'}
04 Jan 2020 06:08:09 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
04 Jan 2020 06:08:09 UTC: NOTICE : Using target: livecd-stage2
04 Jan 2020 06:08:09 UTC: NOTICE : Source file specification matching setting is: strict
04 Jan 2020 06:08:09 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
04 Jan 2020 06:08:11 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200104T033705Z.tar.xz
04 Jan 2020 06:08:11 UTC: NOTICE : Removing AutoResume Points ...
04 Jan 2020 06:08:11 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200104T033705Z
04 Jan 2020 06:08:11 UTC: NOTICE : --- Running action sequence: unpack
04 Jan 2020 06:08:11 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
04 Jan 2020 06:08:11 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
04 Jan 2020 06:08:11 UTC: NOTICE : Removing AutoResume Points ...
04 Jan 2020 06:08:11 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200104T033705Z
04 Jan 2020 06:08:11 UTC: NOTICE : Clearing the chroot path ...
04 Jan 2020 06:08:11 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200104T033705Z
04 Jan 2020 06:08:11 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200104T033705Z.tar.xz
04 Jan 2020 06:08:11 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200104T033705Z (this may take some time) ..
04 Jan 2020 06:08:27 UTC: NOTICE : --- Running action sequence: unpack_snapshot
04 Jan 2020 06:08:27 UTC: NOTICE : --- Running action sequence: config_profile_link
04 Jan 2020 06:08:27 UTC: NOTICE : --- Running action sequence: setup_confdir
04 Jan 2020 06:08:27 UTC: NOTICE : --- Running action sequence: portage_overlay
04 Jan 2020 06:08:27 UTC: NOTICE : --- Running action sequence: bind
04 Jan 2020 06:08:27 UTC: NOTICE : --- Running action sequence: chroot_setup
04 Jan 2020 06:08:27 UTC: NOTICE : Setting up chroot...
04 Jan 2020 06:08:27 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
04 Jan 2020 06:08:27 UTC: WARNING : If your build fails look here first as the possible problem.
04 Jan 2020 06:08:27 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
04 Jan 2020 06:08:27 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
04 Jan 2020 06:08:27 UTC: WARNING : You have been warned.
04 Jan 2020 06:08:27 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200104T033705Z/etc/portage/make.conf
04 Jan 2020 06:08:27 UTC: NOTICE : STICKY-CONFIG is enabled
04 Jan 2020 06:08:27 UTC: NOTICE : --- Running action sequence: setup_environment
04 Jan 2020 06:08:27 UTC: NOTICE : --- Running action sequence: run_local
04 Jan 2020 06:08:27 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200104T033705Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200104T033705Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200104T033705Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200104T033705Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200104T033705Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200104T033705Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200104T033705Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200104T033705Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.1 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (3 of 3) virtual/libelf-3::gentoo
>>> Installing (3 of 3) virtual/libelf-3::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.86:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.1^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200104T033705Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200104T033705Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200104T033705Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200104T033705Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200104T033705Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.86-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
04 Jan 2020 06:50:04 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
04 Jan 2020 06:50:05 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
04 Jan 2020 06:50:05 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
04 Jan 2020 06:50:05 UTC: NOTICE : Cleaning up... Running unbind()
04 Jan 2020 06:50:05 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200104T033705Z/tmp/kerncache is not a mount point. Skipping
04 Jan 2020 06:50:05 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200104T033705Z/var/cache/binpkgs is not a mount point. Skipping
04 Jan 2020 06:50:05 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200104T033705Z/run is not a mount point. Skipping
04 Jan 2020 06:50:05 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200104T033705Z/dev/shm does not exist. Skipping
04 Jan 2020 06:50:05 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200104T033705Z/dev/pts does not exist. Skipping
04 Jan 2020 06:50:05 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200104T033705Z/var/tmp/portage is not a mount point. Skipping
04 Jan 2020 06:50:05 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200104T033705Z/var/cache/distfiles is not a mount point. Skipping
04 Jan 2020 06:50:05 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200104T033705Z/var/db/repos/gentoo is not a mount point. Skipping
04 Jan 2020 06:50:05 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200104T033705Z/dev is not a mount point. Skipping
04 Jan 2020 06:50:05 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200104T033705Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4416.59user 214.35system 41:55.79elapsed 184%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (0major+19614375minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200104T033705Z.j3wpdN/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-01-03 6:52 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-01-03 6:52 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
03 Jan 2020 06:10:26 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
03 Jan 2020 06:10:26 UTC: NOTICE : conf_values[options] = {'autoresume', 'bindist', 'snapcache', 'pkgcache', 'clear-autoresume', 'kerncache'}
03 Jan 2020 06:10:26 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
03 Jan 2020 06:10:26 UTC: NOTICE : Using target: livecd-stage2
03 Jan 2020 06:10:26 UTC: NOTICE : Source file specification matching setting is: strict
03 Jan 2020 06:10:26 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
03 Jan 2020 06:10:28 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200103T034905Z.tar.xz
03 Jan 2020 06:10:28 UTC: NOTICE : Removing AutoResume Points ...
03 Jan 2020 06:10:28 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200103T034905Z
03 Jan 2020 06:10:28 UTC: NOTICE : --- Running action sequence: unpack
03 Jan 2020 06:10:28 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
03 Jan 2020 06:10:28 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
03 Jan 2020 06:10:28 UTC: NOTICE : Removing AutoResume Points ...
03 Jan 2020 06:10:28 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200103T034905Z
03 Jan 2020 06:10:28 UTC: NOTICE : Clearing the chroot path ...
03 Jan 2020 06:10:28 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200103T034905Z
03 Jan 2020 06:10:28 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200103T034905Z.tar.xz
03 Jan 2020 06:10:28 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200103T034905Z (this may take some time) ..
03 Jan 2020 06:10:44 UTC: NOTICE : --- Running action sequence: unpack_snapshot
03 Jan 2020 06:10:44 UTC: NOTICE : --- Running action sequence: config_profile_link
03 Jan 2020 06:10:44 UTC: NOTICE : --- Running action sequence: setup_confdir
03 Jan 2020 06:10:44 UTC: NOTICE : --- Running action sequence: portage_overlay
03 Jan 2020 06:10:44 UTC: NOTICE : --- Running action sequence: bind
03 Jan 2020 06:10:44 UTC: NOTICE : --- Running action sequence: chroot_setup
03 Jan 2020 06:10:44 UTC: NOTICE : Setting up chroot...
03 Jan 2020 06:10:44 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
03 Jan 2020 06:10:44 UTC: WARNING : If your build fails look here first as the possible problem.
03 Jan 2020 06:10:44 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
03 Jan 2020 06:10:44 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
03 Jan 2020 06:10:44 UTC: WARNING : You have been warned.
03 Jan 2020 06:10:44 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200103T034905Z/etc/portage/make.conf
03 Jan 2020 06:10:44 UTC: NOTICE : STICKY-CONFIG is enabled
03 Jan 2020 06:10:44 UTC: NOTICE : --- Running action sequence: setup_environment
03 Jan 2020 06:10:44 UTC: NOTICE : --- Running action sequence: run_local
03 Jan 2020 06:10:44 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200103T034905Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200103T034905Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200103T034905Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200103T034905Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200103T034905Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200103T034905Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200103T034905Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200103T034905Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.1 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (3 of 3) virtual/libelf-3::gentoo
>>> Installing (3 of 3) virtual/libelf-3::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.86:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.1^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200103T034905Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200103T034905Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200103T034905Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200103T034905Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200103T034905Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.86-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
03 Jan 2020 06:52:27 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
03 Jan 2020 06:52:27 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
03 Jan 2020 06:52:27 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
03 Jan 2020 06:52:27 UTC: NOTICE : Cleaning up... Running unbind()
03 Jan 2020 06:52:27 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200103T034905Z/tmp/kerncache is not a mount point. Skipping
03 Jan 2020 06:52:27 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200103T034905Z/var/cache/binpkgs is not a mount point. Skipping
03 Jan 2020 06:52:27 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200103T034905Z/run is not a mount point. Skipping
03 Jan 2020 06:52:27 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200103T034905Z/dev/shm does not exist. Skipping
03 Jan 2020 06:52:27 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200103T034905Z/dev/pts does not exist. Skipping
03 Jan 2020 06:52:27 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200103T034905Z/var/tmp/portage is not a mount point. Skipping
03 Jan 2020 06:52:27 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200103T034905Z/var/cache/distfiles is not a mount point. Skipping
03 Jan 2020 06:52:27 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200103T034905Z/var/db/repos/gentoo is not a mount point. Skipping
03 Jan 2020 06:52:27 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200103T034905Z/dev is not a mount point. Skipping
03 Jan 2020 06:52:27 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200103T034905Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4403.02user 210.80system 42:01.07elapsed 183%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (0major+19615919minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200103T034905Z.0BrbbX/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-01-02 6:42 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-01-02 6:42 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
02 Jan 2020 06:00:38 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
02 Jan 2020 06:00:38 UTC: NOTICE : conf_values[options] = {'bindist', 'kerncache', 'pkgcache', 'snapcache', 'clear-autoresume', 'autoresume'}
02 Jan 2020 06:00:39 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
02 Jan 2020 06:00:39 UTC: NOTICE : Using target: livecd-stage2
02 Jan 2020 06:00:39 UTC: NOTICE : Source file specification matching setting is: strict
02 Jan 2020 06:00:39 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
02 Jan 2020 06:00:40 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200102T034808Z.tar.xz
02 Jan 2020 06:00:40 UTC: NOTICE : Removing AutoResume Points ...
02 Jan 2020 06:00:40 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200102T034808Z
02 Jan 2020 06:00:40 UTC: NOTICE : --- Running action sequence: unpack
02 Jan 2020 06:00:40 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
02 Jan 2020 06:00:40 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
02 Jan 2020 06:00:40 UTC: NOTICE : Removing AutoResume Points ...
02 Jan 2020 06:00:40 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200102T034808Z
02 Jan 2020 06:00:40 UTC: NOTICE : Clearing the chroot path ...
02 Jan 2020 06:00:40 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200102T034808Z
02 Jan 2020 06:00:40 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200102T034808Z.tar.xz
02 Jan 2020 06:00:40 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200102T034808Z (this may take some time) ..
02 Jan 2020 06:00:56 UTC: NOTICE : --- Running action sequence: unpack_snapshot
02 Jan 2020 06:00:56 UTC: NOTICE : --- Running action sequence: config_profile_link
02 Jan 2020 06:00:56 UTC: NOTICE : --- Running action sequence: setup_confdir
02 Jan 2020 06:00:56 UTC: NOTICE : --- Running action sequence: portage_overlay
02 Jan 2020 06:00:56 UTC: NOTICE : --- Running action sequence: bind
02 Jan 2020 06:00:56 UTC: NOTICE : --- Running action sequence: chroot_setup
02 Jan 2020 06:00:56 UTC: NOTICE : Setting up chroot...
02 Jan 2020 06:00:56 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
02 Jan 2020 06:00:56 UTC: WARNING : If your build fails look here first as the possible problem.
02 Jan 2020 06:00:56 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
02 Jan 2020 06:00:56 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
02 Jan 2020 06:00:56 UTC: WARNING : You have been warned.
02 Jan 2020 06:00:56 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200102T034808Z/etc/portage/make.conf
02 Jan 2020 06:00:56 UTC: NOTICE : STICKY-CONFIG is enabled
02 Jan 2020 06:00:56 UTC: NOTICE : --- Running action sequence: setup_environment
02 Jan 2020 06:00:56 UTC: NOTICE : --- Running action sequence: run_local
02 Jan 2020 06:00:56 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200102T034808Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200102T034808Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200102T034808Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200102T034808Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200102T034808Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200102T034808Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200102T034808Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200102T034808Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.1 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (3 of 3) virtual/libelf-3::gentoo
>>> Installing (3 of 3) virtual/libelf-3::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.86:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.1^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200102T034808Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200102T034808Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200102T034808Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200102T034808Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200102T034808Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.86-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
02 Jan 2020 06:42:55 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
02 Jan 2020 06:42:55 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
02 Jan 2020 06:42:55 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
02 Jan 2020 06:42:55 UTC: NOTICE : Cleaning up... Running unbind()
02 Jan 2020 06:42:55 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200102T034808Z/tmp/kerncache is not a mount point. Skipping
02 Jan 2020 06:42:55 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200102T034808Z/var/cache/binpkgs is not a mount point. Skipping
02 Jan 2020 06:42:55 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200102T034808Z/run is not a mount point. Skipping
02 Jan 2020 06:42:55 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200102T034808Z/dev/shm does not exist. Skipping
02 Jan 2020 06:42:55 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200102T034808Z/dev/pts does not exist. Skipping
02 Jan 2020 06:42:55 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200102T034808Z/var/tmp/portage is not a mount point. Skipping
02 Jan 2020 06:42:55 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200102T034808Z/var/cache/distfiles is not a mount point. Skipping
02 Jan 2020 06:42:55 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200102T034808Z/var/db/repos/gentoo is not a mount point. Skipping
02 Jan 2020 06:42:55 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200102T034808Z/dev is not a mount point. Skipping
02 Jan 2020 06:42:55 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200102T034808Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4406.60user 211.53system 42:16.86elapsed 182%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (0major+19619459minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200102T034808Z.UyIWNF/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2020-01-01 6:34 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2020-01-01 6:34 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
01 Jan 2020 05:51:51 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
01 Jan 2020 05:51:51 UTC: NOTICE : conf_values[options] = {'bindist', 'kerncache', 'pkgcache', 'snapcache', 'autoresume', 'clear-autoresume'}
01 Jan 2020 05:51:51 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
01 Jan 2020 05:51:51 UTC: NOTICE : Using target: livecd-stage2
01 Jan 2020 05:51:51 UTC: NOTICE : Source file specification matching setting is: strict
01 Jan 2020 05:51:51 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
01 Jan 2020 05:51:52 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20200101T033707Z.tar.xz
01 Jan 2020 05:51:52 UTC: NOTICE : Removing AutoResume Points ...
01 Jan 2020 05:51:52 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200101T033707Z
01 Jan 2020 05:51:52 UTC: NOTICE : --- Running action sequence: unpack
01 Jan 2020 05:51:52 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
01 Jan 2020 05:51:52 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
01 Jan 2020 05:51:52 UTC: NOTICE : Removing AutoResume Points ...
01 Jan 2020 05:51:52 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20200101T033707Z
01 Jan 2020 05:51:52 UTC: NOTICE : Clearing the chroot path ...
01 Jan 2020 05:51:52 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20200101T033707Z
01 Jan 2020 05:51:52 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20200101T033707Z.tar.xz
01 Jan 2020 05:51:52 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20200101T033707Z (this may take some time) ..
01 Jan 2020 05:52:10 UTC: NOTICE : --- Running action sequence: unpack_snapshot
01 Jan 2020 05:52:10 UTC: NOTICE : --- Running action sequence: config_profile_link
01 Jan 2020 05:52:10 UTC: NOTICE : --- Running action sequence: setup_confdir
01 Jan 2020 05:52:10 UTC: NOTICE : --- Running action sequence: portage_overlay
01 Jan 2020 05:52:10 UTC: NOTICE : --- Running action sequence: bind
01 Jan 2020 05:52:10 UTC: NOTICE : --- Running action sequence: chroot_setup
01 Jan 2020 05:52:10 UTC: NOTICE : Setting up chroot...
01 Jan 2020 05:52:10 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
01 Jan 2020 05:52:10 UTC: WARNING : If your build fails look here first as the possible problem.
01 Jan 2020 05:52:10 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
01 Jan 2020 05:52:10 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
01 Jan 2020 05:52:10 UTC: WARNING : You have been warned.
01 Jan 2020 05:52:10 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20200101T033707Z/etc/portage/make.conf
01 Jan 2020 05:52:10 UTC: NOTICE : STICKY-CONFIG is enabled
01 Jan 2020 05:52:10 UTC: NOTICE : --- Running action sequence: setup_environment
01 Jan 2020 05:52:10 UTC: NOTICE : --- Running action sequence: run_local
01 Jan 2020 05:52:10 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200101T033707Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200101T033707Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200101T033707Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200101T033707Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20200101T033707Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200101T033707Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20200101T033707Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20200101T033707Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.1 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (3 of 3) virtual/libelf-3::gentoo
>>> Installing (3 of 3) virtual/libelf-3::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.86:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.1^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20200101T033707Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20200101T033707Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20200101T033707Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20200101T033707Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20200101T033707Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.86-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
01 Jan 2020 06:34:02 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
01 Jan 2020 06:34:02 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
01 Jan 2020 06:34:02 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
01 Jan 2020 06:34:02 UTC: NOTICE : Cleaning up... Running unbind()
01 Jan 2020 06:34:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200101T033707Z/tmp/kerncache is not a mount point. Skipping
01 Jan 2020 06:34:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200101T033707Z/var/cache/binpkgs is not a mount point. Skipping
01 Jan 2020 06:34:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200101T033707Z/run is not a mount point. Skipping
01 Jan 2020 06:34:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200101T033707Z/dev/shm does not exist. Skipping
01 Jan 2020 06:34:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200101T033707Z/dev/pts does not exist. Skipping
01 Jan 2020 06:34:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200101T033707Z/var/tmp/portage is not a mount point. Skipping
01 Jan 2020 06:34:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200101T033707Z/var/cache/distfiles is not a mount point. Skipping
01 Jan 2020 06:34:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200101T033707Z/var/db/repos/gentoo is not a mount point. Skipping
01 Jan 2020 06:34:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200101T033707Z/dev is not a mount point. Skipping
01 Jan 2020 06:34:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20200101T033707Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4406.14user 213.98system 42:11.60elapsed 182%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (0major+19616151minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200101T033707Z.lA86YW/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-12-31 7:11 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-12-31 7:11 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
31 Dec 2019 06:29:39 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
31 Dec 2019 06:29:39 UTC: NOTICE : conf_values[options] = {'snapcache', 'autoresume', 'clear-autoresume', 'kerncache', 'pkgcache', 'bindist'}
31 Dec 2019 06:29:39 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
31 Dec 2019 06:29:39 UTC: NOTICE : Using target: livecd-stage2
31 Dec 2019 06:29:40 UTC: NOTICE : Source file specification matching setting is: strict
31 Dec 2019 06:29:40 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
31 Dec 2019 06:29:41 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20191231T032608Z.tar.xz
31 Dec 2019 06:29:41 UTC: NOTICE : Removing AutoResume Points ...
31 Dec 2019 06:29:41 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20191231T032608Z
31 Dec 2019 06:29:41 UTC: NOTICE : --- Running action sequence: unpack
31 Dec 2019 06:29:41 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
31 Dec 2019 06:29:41 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
31 Dec 2019 06:29:41 UTC: NOTICE : Removing AutoResume Points ...
31 Dec 2019 06:29:41 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20191231T032608Z
31 Dec 2019 06:29:41 UTC: NOTICE : Clearing the chroot path ...
31 Dec 2019 06:29:41 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20191231T032608Z
31 Dec 2019 06:29:41 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20191231T032608Z.tar.xz
31 Dec 2019 06:29:41 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20191231T032608Z (this may take some time) ..
31 Dec 2019 06:29:57 UTC: NOTICE : --- Running action sequence: unpack_snapshot
31 Dec 2019 06:29:57 UTC: NOTICE : --- Running action sequence: config_profile_link
31 Dec 2019 06:29:57 UTC: NOTICE : --- Running action sequence: setup_confdir
31 Dec 2019 06:29:57 UTC: NOTICE : --- Running action sequence: portage_overlay
31 Dec 2019 06:29:57 UTC: NOTICE : --- Running action sequence: bind
31 Dec 2019 06:29:57 UTC: NOTICE : --- Running action sequence: chroot_setup
31 Dec 2019 06:29:57 UTC: NOTICE : Setting up chroot...
31 Dec 2019 06:29:57 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
31 Dec 2019 06:29:57 UTC: WARNING : If your build fails look here first as the possible problem.
31 Dec 2019 06:29:57 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
31 Dec 2019 06:29:57 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
31 Dec 2019 06:29:57 UTC: WARNING : You have been warned.
31 Dec 2019 06:29:57 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20191231T032608Z/etc/portage/make.conf
31 Dec 2019 06:29:57 UTC: NOTICE : STICKY-CONFIG is enabled
31 Dec 2019 06:29:57 UTC: NOTICE : --- Running action sequence: setup_environment
31 Dec 2019 06:29:57 UTC: NOTICE : --- Running action sequence: run_local
31 Dec 2019 06:29:57 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191231T032608Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191231T032608Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20191231T032608Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20191231T032608Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20191231T032608Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191231T032608Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191231T032608Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20191231T032608Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.1 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (3 of 3) virtual/libelf-3::gentoo
>>> Installing (3 of 3) virtual/libelf-3::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.86:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.1^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191231T032608Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191231T032608Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191231T032608Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191231T032608Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20191231T032608Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.86-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
31 Dec 2019 07:11:43 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
31 Dec 2019 07:11:44 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
31 Dec 2019 07:11:44 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
31 Dec 2019 07:11:44 UTC: NOTICE : Cleaning up... Running unbind()
31 Dec 2019 07:11:44 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191231T032608Z/tmp/kerncache is not a mount point. Skipping
31 Dec 2019 07:11:44 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191231T032608Z/var/cache/binpkgs is not a mount point. Skipping
31 Dec 2019 07:11:44 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191231T032608Z/run is not a mount point. Skipping
31 Dec 2019 07:11:44 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191231T032608Z/dev/shm does not exist. Skipping
31 Dec 2019 07:11:44 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191231T032608Z/dev/pts does not exist. Skipping
31 Dec 2019 07:11:44 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191231T032608Z/var/tmp/portage is not a mount point. Skipping
31 Dec 2019 07:11:44 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191231T032608Z/var/cache/distfiles is not a mount point. Skipping
31 Dec 2019 07:11:44 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191231T032608Z/var/db/repos/gentoo is not a mount point. Skipping
31 Dec 2019 07:11:44 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191231T032608Z/dev is not a mount point. Skipping
31 Dec 2019 07:11:44 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191231T032608Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4410.70user 216.89system 42:04.64elapsed 183%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (0major+19615904minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191231T032608Z.fwc1W6/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-12-30 6:22 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-12-30 6:22 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
30 Dec 2019 05:40:43 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
30 Dec 2019 05:40:43 UTC: NOTICE : conf_values[options] = {'bindist', 'autoresume', 'kerncache', 'pkgcache', 'clear-autoresume', 'snapcache'}
30 Dec 2019 05:40:43 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
30 Dec 2019 05:40:43 UTC: NOTICE : Using target: livecd-stage2
30 Dec 2019 05:40:43 UTC: NOTICE : Source file specification matching setting is: strict
30 Dec 2019 05:40:43 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
30 Dec 2019 05:40:44 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20191230T032703Z.tar.xz
30 Dec 2019 05:40:44 UTC: NOTICE : Removing AutoResume Points ...
30 Dec 2019 05:40:44 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20191230T032703Z
30 Dec 2019 05:40:44 UTC: NOTICE : --- Running action sequence: unpack
30 Dec 2019 05:40:44 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
30 Dec 2019 05:40:44 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
30 Dec 2019 05:40:44 UTC: NOTICE : Removing AutoResume Points ...
30 Dec 2019 05:40:44 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20191230T032703Z
30 Dec 2019 05:40:44 UTC: NOTICE : Clearing the chroot path ...
30 Dec 2019 05:40:44 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20191230T032703Z
30 Dec 2019 05:40:44 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20191230T032703Z.tar.xz
30 Dec 2019 05:40:44 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20191230T032703Z (this may take some time) ..
30 Dec 2019 05:41:01 UTC: NOTICE : --- Running action sequence: unpack_snapshot
30 Dec 2019 05:41:01 UTC: NOTICE : --- Running action sequence: config_profile_link
30 Dec 2019 05:41:01 UTC: NOTICE : --- Running action sequence: setup_confdir
30 Dec 2019 05:41:01 UTC: NOTICE : --- Running action sequence: portage_overlay
30 Dec 2019 05:41:01 UTC: NOTICE : --- Running action sequence: bind
30 Dec 2019 05:41:01 UTC: NOTICE : --- Running action sequence: chroot_setup
30 Dec 2019 05:41:01 UTC: NOTICE : Setting up chroot...
30 Dec 2019 05:41:01 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
30 Dec 2019 05:41:01 UTC: WARNING : If your build fails look here first as the possible problem.
30 Dec 2019 05:41:01 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
30 Dec 2019 05:41:01 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
30 Dec 2019 05:41:01 UTC: WARNING : You have been warned.
30 Dec 2019 05:41:01 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20191230T032703Z/etc/portage/make.conf
30 Dec 2019 05:41:01 UTC: NOTICE : STICKY-CONFIG is enabled
30 Dec 2019 05:41:01 UTC: NOTICE : --- Running action sequence: setup_environment
30 Dec 2019 05:41:01 UTC: NOTICE : --- Running action sequence: run_local
30 Dec 2019 05:41:01 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191230T032703Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191230T032703Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20191230T032703Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20191230T032703Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20191230T032703Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191230T032703Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191230T032703Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20191230T032703Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.1 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (3 of 3) virtual/libelf-3::gentoo
>>> Installing (3 of 3) virtual/libelf-3::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.86:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.1^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191230T032703Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191230T032703Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191230T032703Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191230T032703Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20191230T032703Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.86-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
30 Dec 2019 06:22:39 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
30 Dec 2019 06:22:39 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
30 Dec 2019 06:22:39 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
30 Dec 2019 06:22:39 UTC: NOTICE : Cleaning up... Running unbind()
30 Dec 2019 06:22:39 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191230T032703Z/tmp/kerncache is not a mount point. Skipping
30 Dec 2019 06:22:39 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191230T032703Z/var/cache/binpkgs is not a mount point. Skipping
30 Dec 2019 06:22:39 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191230T032703Z/run is not a mount point. Skipping
30 Dec 2019 06:22:39 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191230T032703Z/dev/shm does not exist. Skipping
30 Dec 2019 06:22:39 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191230T032703Z/dev/pts does not exist. Skipping
30 Dec 2019 06:22:39 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191230T032703Z/var/tmp/portage is not a mount point. Skipping
30 Dec 2019 06:22:39 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191230T032703Z/var/cache/distfiles is not a mount point. Skipping
30 Dec 2019 06:22:39 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191230T032703Z/var/db/repos/gentoo is not a mount point. Skipping
30 Dec 2019 06:22:39 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191230T032703Z/dev is not a mount point. Skipping
30 Dec 2019 06:22:39 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191230T032703Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4410.18user 214.52system 41:56.77elapsed 183%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (0major+19615150minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191230T032703Z.BtviwT/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-12-29 6:14 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-12-29 6:14 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
29 Dec 2019 05:32:33 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
29 Dec 2019 05:32:33 UTC: NOTICE : conf_values[options] = {'snapcache', 'bindist', 'autoresume', 'pkgcache', 'clear-autoresume', 'kerncache'}
29 Dec 2019 05:32:33 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
29 Dec 2019 05:32:33 UTC: NOTICE : Using target: livecd-stage2
29 Dec 2019 05:32:33 UTC: NOTICE : Source file specification matching setting is: strict
29 Dec 2019 05:32:33 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
29 Dec 2019 05:32:34 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20191229T031706Z.tar.xz
29 Dec 2019 05:32:34 UTC: NOTICE : Removing AutoResume Points ...
29 Dec 2019 05:32:34 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20191229T031706Z
29 Dec 2019 05:32:34 UTC: NOTICE : --- Running action sequence: unpack
29 Dec 2019 05:32:34 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
29 Dec 2019 05:32:34 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
29 Dec 2019 05:32:34 UTC: NOTICE : Removing AutoResume Points ...
29 Dec 2019 05:32:34 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20191229T031706Z
29 Dec 2019 05:32:34 UTC: NOTICE : Clearing the chroot path ...
29 Dec 2019 05:32:34 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20191229T031706Z
29 Dec 2019 05:32:34 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20191229T031706Z.tar.xz
29 Dec 2019 05:32:34 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20191229T031706Z (this may take some time) ..
29 Dec 2019 05:32:53 UTC: NOTICE : --- Running action sequence: unpack_snapshot
29 Dec 2019 05:32:53 UTC: NOTICE : --- Running action sequence: config_profile_link
29 Dec 2019 05:32:53 UTC: NOTICE : --- Running action sequence: setup_confdir
29 Dec 2019 05:32:53 UTC: NOTICE : --- Running action sequence: portage_overlay
29 Dec 2019 05:32:53 UTC: NOTICE : --- Running action sequence: bind
29 Dec 2019 05:32:53 UTC: NOTICE : --- Running action sequence: chroot_setup
29 Dec 2019 05:32:54 UTC: NOTICE : Setting up chroot...
29 Dec 2019 05:32:54 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
29 Dec 2019 05:32:54 UTC: WARNING : If your build fails look here first as the possible problem.
29 Dec 2019 05:32:54 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
29 Dec 2019 05:32:54 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
29 Dec 2019 05:32:54 UTC: WARNING : You have been warned.
29 Dec 2019 05:32:54 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20191229T031706Z/etc/portage/make.conf
29 Dec 2019 05:32:54 UTC: NOTICE : STICKY-CONFIG is enabled
29 Dec 2019 05:32:54 UTC: NOTICE : --- Running action sequence: setup_environment
29 Dec 2019 05:32:54 UTC: NOTICE : --- Running action sequence: run_local
29 Dec 2019 05:32:54 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191229T031706Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191229T031706Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20191229T031706Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20191229T031706Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20191229T031706Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191229T031706Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191229T031706Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20191229T031706Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.1 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (3 of 3) virtual/libelf-3::gentoo
>>> Installing (3 of 3) virtual/libelf-3::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.86:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.1^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191229T031706Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191229T031706Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191229T031706Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191229T031706Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20191229T031706Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.86-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
29 Dec 2019 06:14:39 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
29 Dec 2019 06:14:39 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
29 Dec 2019 06:14:39 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
29 Dec 2019 06:14:39 UTC: NOTICE : Cleaning up... Running unbind()
29 Dec 2019 06:14:39 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191229T031706Z/tmp/kerncache is not a mount point. Skipping
29 Dec 2019 06:14:39 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191229T031706Z/var/cache/binpkgs is not a mount point. Skipping
29 Dec 2019 06:14:39 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191229T031706Z/run is not a mount point. Skipping
29 Dec 2019 06:14:39 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191229T031706Z/dev/shm does not exist. Skipping
29 Dec 2019 06:14:39 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191229T031706Z/dev/pts does not exist. Skipping
29 Dec 2019 06:14:39 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191229T031706Z/var/tmp/portage is not a mount point. Skipping
29 Dec 2019 06:14:39 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191229T031706Z/var/cache/distfiles is not a mount point. Skipping
29 Dec 2019 06:14:39 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191229T031706Z/var/db/repos/gentoo is not a mount point. Skipping
29 Dec 2019 06:14:39 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191229T031706Z/dev is not a mount point. Skipping
29 Dec 2019 06:14:39 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191229T031706Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4406.85user 215.69system 42:06.46elapsed 182%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (0major+19620903minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191229T031706Z.yM8owG/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-12-28 6:19 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-12-28 6:19 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
28 Dec 2019 05:37:07 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
28 Dec 2019 05:37:07 UTC: NOTICE : conf_values[options] = {'autoresume', 'clear-autoresume', 'pkgcache', 'bindist', 'kerncache', 'snapcache'}
28 Dec 2019 05:37:07 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
28 Dec 2019 05:37:07 UTC: NOTICE : Using target: livecd-stage2
28 Dec 2019 05:37:07 UTC: NOTICE : Source file specification matching setting is: strict
28 Dec 2019 05:37:07 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
28 Dec 2019 05:37:09 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20191228T032405Z.tar.xz
28 Dec 2019 05:37:09 UTC: NOTICE : Removing AutoResume Points ...
28 Dec 2019 05:37:09 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20191228T032405Z
28 Dec 2019 05:37:09 UTC: NOTICE : --- Running action sequence: unpack
28 Dec 2019 05:37:09 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
28 Dec 2019 05:37:09 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
28 Dec 2019 05:37:09 UTC: NOTICE : Removing AutoResume Points ...
28 Dec 2019 05:37:09 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20191228T032405Z
28 Dec 2019 05:37:09 UTC: NOTICE : Clearing the chroot path ...
28 Dec 2019 05:37:09 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20191228T032405Z
28 Dec 2019 05:37:09 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20191228T032405Z.tar.xz
28 Dec 2019 05:37:09 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20191228T032405Z (this may take some time) ..
28 Dec 2019 05:37:26 UTC: NOTICE : --- Running action sequence: unpack_snapshot
28 Dec 2019 05:37:26 UTC: NOTICE : --- Running action sequence: config_profile_link
28 Dec 2019 05:37:26 UTC: NOTICE : --- Running action sequence: setup_confdir
28 Dec 2019 05:37:26 UTC: NOTICE : --- Running action sequence: portage_overlay
28 Dec 2019 05:37:26 UTC: NOTICE : --- Running action sequence: bind
28 Dec 2019 05:37:26 UTC: NOTICE : --- Running action sequence: chroot_setup
28 Dec 2019 05:37:26 UTC: NOTICE : Setting up chroot...
28 Dec 2019 05:37:26 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
28 Dec 2019 05:37:26 UTC: WARNING : If your build fails look here first as the possible problem.
28 Dec 2019 05:37:26 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
28 Dec 2019 05:37:26 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
28 Dec 2019 05:37:26 UTC: WARNING : You have been warned.
28 Dec 2019 05:37:26 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20191228T032405Z/etc/portage/make.conf
28 Dec 2019 05:37:26 UTC: NOTICE : STICKY-CONFIG is enabled
28 Dec 2019 05:37:26 UTC: NOTICE : --- Running action sequence: setup_environment
28 Dec 2019 05:37:26 UTC: NOTICE : --- Running action sequence: run_local
28 Dec 2019 05:37:26 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191228T032405Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191228T032405Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20191228T032405Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20191228T032405Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20191228T032405Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191228T032405Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191228T032405Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20191228T032405Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.1 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (3 of 3) virtual/libelf-3::gentoo
>>> Installing (3 of 3) virtual/libelf-3::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.86:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.1^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191228T032405Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191228T032405Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191228T032405Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191228T032405Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20191228T032405Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.86-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
28 Dec 2019 06:19:02 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
28 Dec 2019 06:19:02 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
28 Dec 2019 06:19:02 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
28 Dec 2019 06:19:02 UTC: NOTICE : Cleaning up... Running unbind()
28 Dec 2019 06:19:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191228T032405Z/tmp/kerncache is not a mount point. Skipping
28 Dec 2019 06:19:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191228T032405Z/var/cache/binpkgs is not a mount point. Skipping
28 Dec 2019 06:19:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191228T032405Z/run is not a mount point. Skipping
28 Dec 2019 06:19:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191228T032405Z/dev/shm does not exist. Skipping
28 Dec 2019 06:19:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191228T032405Z/dev/pts does not exist. Skipping
28 Dec 2019 06:19:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191228T032405Z/var/tmp/portage is not a mount point. Skipping
28 Dec 2019 06:19:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191228T032405Z/var/cache/distfiles is not a mount point. Skipping
28 Dec 2019 06:19:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191228T032405Z/var/db/repos/gentoo is not a mount point. Skipping
28 Dec 2019 06:19:02 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191228T032405Z/dev is not a mount point. Skipping
28 Dec 2019 06:19:03 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191228T032405Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4411.35user 212.52system 41:55.60elapsed 183%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (0major+19619536minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191228T032405Z.2tVKAi/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-12-27 6:29 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-12-27 6:29 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
27 Dec 2019 05:47:58 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
27 Dec 2019 05:47:58 UTC: NOTICE : conf_values[options] = {'clear-autoresume', 'bindist', 'pkgcache', 'snapcache', 'kerncache', 'autoresume'}
27 Dec 2019 05:47:59 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
27 Dec 2019 05:47:59 UTC: NOTICE : Using target: livecd-stage2
27 Dec 2019 05:47:59 UTC: NOTICE : Source file specification matching setting is: strict
27 Dec 2019 05:47:59 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
27 Dec 2019 05:48:00 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20191227T032605Z.tar.xz
27 Dec 2019 05:48:00 UTC: NOTICE : Removing AutoResume Points ...
27 Dec 2019 05:48:00 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20191227T032605Z
27 Dec 2019 05:48:00 UTC: NOTICE : --- Running action sequence: unpack
27 Dec 2019 05:48:00 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
27 Dec 2019 05:48:00 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
27 Dec 2019 05:48:00 UTC: NOTICE : Removing AutoResume Points ...
27 Dec 2019 05:48:00 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20191227T032605Z
27 Dec 2019 05:48:00 UTC: NOTICE : Clearing the chroot path ...
27 Dec 2019 05:48:00 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20191227T032605Z
27 Dec 2019 05:48:00 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20191227T032605Z.tar.xz
27 Dec 2019 05:48:00 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20191227T032605Z (this may take some time) ..
27 Dec 2019 05:48:17 UTC: NOTICE : --- Running action sequence: unpack_snapshot
27 Dec 2019 05:48:17 UTC: NOTICE : --- Running action sequence: config_profile_link
27 Dec 2019 05:48:17 UTC: NOTICE : --- Running action sequence: setup_confdir
27 Dec 2019 05:48:17 UTC: NOTICE : --- Running action sequence: portage_overlay
27 Dec 2019 05:48:17 UTC: NOTICE : --- Running action sequence: bind
27 Dec 2019 05:48:17 UTC: NOTICE : --- Running action sequence: chroot_setup
27 Dec 2019 05:48:17 UTC: NOTICE : Setting up chroot...
27 Dec 2019 05:48:17 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
27 Dec 2019 05:48:17 UTC: WARNING : If your build fails look here first as the possible problem.
27 Dec 2019 05:48:17 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
27 Dec 2019 05:48:17 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
27 Dec 2019 05:48:17 UTC: WARNING : You have been warned.
27 Dec 2019 05:48:17 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20191227T032605Z/etc/portage/make.conf
27 Dec 2019 05:48:17 UTC: NOTICE : STICKY-CONFIG is enabled
27 Dec 2019 05:48:17 UTC: NOTICE : --- Running action sequence: setup_environment
27 Dec 2019 05:48:17 UTC: NOTICE : --- Running action sequence: run_local
27 Dec 2019 05:48:17 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191227T032605Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191227T032605Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20191227T032605Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20191227T032605Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20191227T032605Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191227T032605Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191227T032605Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20191227T032605Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.1 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (3 of 3) virtual/libelf-3::gentoo
>>> Installing (3 of 3) virtual/libelf-3::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.86:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.1^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191227T032605Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191227T032605Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191227T032605Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191227T032605Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20191227T032605Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.86-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
27 Dec 2019 06:29:53 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
27 Dec 2019 06:29:53 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
27 Dec 2019 06:29:53 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
27 Dec 2019 06:29:53 UTC: NOTICE : Cleaning up... Running unbind()
27 Dec 2019 06:29:53 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191227T032605Z/tmp/kerncache is not a mount point. Skipping
27 Dec 2019 06:29:53 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191227T032605Z/var/cache/binpkgs is not a mount point. Skipping
27 Dec 2019 06:29:53 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191227T032605Z/run is not a mount point. Skipping
27 Dec 2019 06:29:53 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191227T032605Z/dev/shm does not exist. Skipping
27 Dec 2019 06:29:53 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191227T032605Z/dev/pts does not exist. Skipping
27 Dec 2019 06:29:53 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191227T032605Z/var/tmp/portage is not a mount point. Skipping
27 Dec 2019 06:29:53 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191227T032605Z/var/cache/distfiles is not a mount point. Skipping
27 Dec 2019 06:29:53 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191227T032605Z/var/db/repos/gentoo is not a mount point. Skipping
27 Dec 2019 06:29:53 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191227T032605Z/dev is not a mount point. Skipping
27 Dec 2019 06:29:53 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191227T032605Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4411.67user 212.15system 41:54.68elapsed 183%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (0major+19617749minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191227T032605Z.qmR76A/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-12-26 6:49 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-12-26 6:49 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
26 Dec 2019 06:07:37 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
26 Dec 2019 06:07:37 UTC: NOTICE : conf_values[options] = {'bindist', 'clear-autoresume', 'autoresume', 'kerncache', 'snapcache', 'pkgcache'}
26 Dec 2019 06:07:37 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
26 Dec 2019 06:07:37 UTC: NOTICE : Using target: livecd-stage2
26 Dec 2019 06:07:37 UTC: NOTICE : Source file specification matching setting is: strict
26 Dec 2019 06:07:37 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
26 Dec 2019 06:07:38 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20191226T034704Z.tar.xz
26 Dec 2019 06:07:38 UTC: NOTICE : Removing AutoResume Points ...
26 Dec 2019 06:07:38 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20191226T034704Z
26 Dec 2019 06:07:38 UTC: NOTICE : --- Running action sequence: unpack
26 Dec 2019 06:07:38 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
26 Dec 2019 06:07:38 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
26 Dec 2019 06:07:38 UTC: NOTICE : Removing AutoResume Points ...
26 Dec 2019 06:07:38 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20191226T034704Z
26 Dec 2019 06:07:38 UTC: NOTICE : Clearing the chroot path ...
26 Dec 2019 06:07:38 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20191226T034704Z
26 Dec 2019 06:07:38 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20191226T034704Z.tar.xz
26 Dec 2019 06:07:38 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20191226T034704Z (this may take some time) ..
26 Dec 2019 06:07:58 UTC: NOTICE : --- Running action sequence: unpack_snapshot
26 Dec 2019 06:07:58 UTC: NOTICE : --- Running action sequence: config_profile_link
26 Dec 2019 06:07:58 UTC: NOTICE : --- Running action sequence: setup_confdir
26 Dec 2019 06:07:58 UTC: NOTICE : --- Running action sequence: portage_overlay
26 Dec 2019 06:07:58 UTC: NOTICE : --- Running action sequence: bind
26 Dec 2019 06:07:58 UTC: NOTICE : --- Running action sequence: chroot_setup
26 Dec 2019 06:07:58 UTC: NOTICE : Setting up chroot...
26 Dec 2019 06:07:58 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
26 Dec 2019 06:07:58 UTC: WARNING : If your build fails look here first as the possible problem.
26 Dec 2019 06:07:58 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
26 Dec 2019 06:07:58 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
26 Dec 2019 06:07:58 UTC: WARNING : You have been warned.
26 Dec 2019 06:07:58 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20191226T034704Z/etc/portage/make.conf
26 Dec 2019 06:07:58 UTC: NOTICE : STICKY-CONFIG is enabled
26 Dec 2019 06:07:58 UTC: NOTICE : --- Running action sequence: setup_environment
26 Dec 2019 06:07:58 UTC: NOTICE : --- Running action sequence: run_local
26 Dec 2019 06:07:58 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191226T034704Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191226T034704Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20191226T034704Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20191226T034704Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20191226T034704Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191226T034704Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191226T034704Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20191226T034704Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.1 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (3 of 3) virtual/libelf-3::gentoo
>>> Installing (3 of 3) virtual/libelf-3::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.86:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.1^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191226T034704Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191226T034704Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191226T034704Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191226T034704Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20191226T034704Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.86-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
26 Dec 2019 06:49:40 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
26 Dec 2019 06:49:40 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
26 Dec 2019 06:49:40 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
26 Dec 2019 06:49:40 UTC: NOTICE : Cleaning up... Running unbind()
26 Dec 2019 06:49:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191226T034704Z/tmp/kerncache is not a mount point. Skipping
26 Dec 2019 06:49:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191226T034704Z/var/cache/binpkgs is not a mount point. Skipping
26 Dec 2019 06:49:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191226T034704Z/run is not a mount point. Skipping
26 Dec 2019 06:49:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191226T034704Z/dev/shm does not exist. Skipping
26 Dec 2019 06:49:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191226T034704Z/dev/pts does not exist. Skipping
26 Dec 2019 06:49:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191226T034704Z/var/tmp/portage is not a mount point. Skipping
26 Dec 2019 06:49:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191226T034704Z/var/cache/distfiles is not a mount point. Skipping
26 Dec 2019 06:49:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191226T034704Z/var/db/repos/gentoo is not a mount point. Skipping
26 Dec 2019 06:49:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191226T034704Z/dev is not a mount point. Skipping
26 Dec 2019 06:49:40 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191226T034704Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4412.10user 214.93system 42:03.79elapsed 183%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (0major+19617773minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191226T034704Z.w2OlE6/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-12-25 6:09 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-12-25 6:09 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
25 Dec 2019 05:27:19 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
25 Dec 2019 05:27:19 UTC: NOTICE : conf_values[options] = {'snapcache', 'clear-autoresume', 'autoresume', 'pkgcache', 'kerncache', 'bindist'}
25 Dec 2019 05:27:19 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
25 Dec 2019 05:27:19 UTC: NOTICE : Using target: livecd-stage2
25 Dec 2019 05:27:19 UTC: NOTICE : Source file specification matching setting is: strict
25 Dec 2019 05:27:19 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
25 Dec 2019 05:27:20 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20191225T031504Z.tar.xz
25 Dec 2019 05:27:20 UTC: NOTICE : Removing AutoResume Points ...
25 Dec 2019 05:27:20 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20191225T031504Z
25 Dec 2019 05:27:20 UTC: NOTICE : --- Running action sequence: unpack
25 Dec 2019 05:27:20 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
25 Dec 2019 05:27:20 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
25 Dec 2019 05:27:20 UTC: NOTICE : Removing AutoResume Points ...
25 Dec 2019 05:27:20 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20191225T031504Z
25 Dec 2019 05:27:20 UTC: NOTICE : Clearing the chroot path ...
25 Dec 2019 05:27:20 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20191225T031504Z
25 Dec 2019 05:27:20 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20191225T031504Z.tar.xz
25 Dec 2019 05:27:20 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20191225T031504Z (this may take some time) ..
25 Dec 2019 05:27:38 UTC: NOTICE : --- Running action sequence: unpack_snapshot
25 Dec 2019 05:27:38 UTC: NOTICE : --- Running action sequence: config_profile_link
25 Dec 2019 05:27:38 UTC: NOTICE : --- Running action sequence: setup_confdir
25 Dec 2019 05:27:38 UTC: NOTICE : --- Running action sequence: portage_overlay
25 Dec 2019 05:27:38 UTC: NOTICE : --- Running action sequence: bind
25 Dec 2019 05:27:38 UTC: NOTICE : --- Running action sequence: chroot_setup
25 Dec 2019 05:27:38 UTC: NOTICE : Setting up chroot...
25 Dec 2019 05:27:38 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
25 Dec 2019 05:27:38 UTC: WARNING : If your build fails look here first as the possible problem.
25 Dec 2019 05:27:38 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
25 Dec 2019 05:27:38 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
25 Dec 2019 05:27:38 UTC: WARNING : You have been warned.
25 Dec 2019 05:27:38 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20191225T031504Z/etc/portage/make.conf
25 Dec 2019 05:27:38 UTC: NOTICE : STICKY-CONFIG is enabled
25 Dec 2019 05:27:38 UTC: NOTICE : --- Running action sequence: setup_environment
25 Dec 2019 05:27:38 UTC: NOTICE : --- Running action sequence: run_local
25 Dec 2019 05:27:38 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191225T031504Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191225T031504Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20191225T031504Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20191225T031504Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20191225T031504Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191225T031504Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191225T031504Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20191225T031504Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.1 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (3 of 3) virtual/libelf-3::gentoo
>>> Installing (3 of 3) virtual/libelf-3::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.86:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.1^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191225T031504Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191225T031504Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191225T031504Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191225T031504Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20191225T031504Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.86-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
25 Dec 2019 06:09:24 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
25 Dec 2019 06:09:24 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
25 Dec 2019 06:09:24 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
25 Dec 2019 06:09:24 UTC: NOTICE : Cleaning up... Running unbind()
25 Dec 2019 06:09:24 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191225T031504Z/tmp/kerncache is not a mount point. Skipping
25 Dec 2019 06:09:24 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191225T031504Z/var/cache/binpkgs is not a mount point. Skipping
25 Dec 2019 06:09:24 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191225T031504Z/run is not a mount point. Skipping
25 Dec 2019 06:09:24 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191225T031504Z/dev/shm does not exist. Skipping
25 Dec 2019 06:09:24 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191225T031504Z/dev/pts does not exist. Skipping
25 Dec 2019 06:09:24 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191225T031504Z/var/tmp/portage is not a mount point. Skipping
25 Dec 2019 06:09:24 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191225T031504Z/var/cache/distfiles is not a mount point. Skipping
25 Dec 2019 06:09:24 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191225T031504Z/var/db/repos/gentoo is not a mount point. Skipping
25 Dec 2019 06:09:24 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191225T031504Z/dev is not a mount point. Skipping
25 Dec 2019 06:09:24 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191225T031504Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4407.33user 214.13system 42:05.41elapsed 182%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (0major+19615698minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191225T031504Z.UGAjUI/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-12-24 6:23 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-12-24 6:23 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
24 Dec 2019 05:41:08 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
24 Dec 2019 05:41:08 UTC: NOTICE : conf_values[options] = {'snapcache', 'autoresume', 'kerncache', 'clear-autoresume', 'bindist', 'pkgcache'}
24 Dec 2019 05:41:08 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
24 Dec 2019 05:41:08 UTC: NOTICE : Using target: livecd-stage2
24 Dec 2019 05:41:08 UTC: NOTICE : Source file specification matching setting is: strict
24 Dec 2019 05:41:08 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
24 Dec 2019 05:41:09 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20191224T031903Z.tar.xz
24 Dec 2019 05:41:09 UTC: NOTICE : Removing AutoResume Points ...
24 Dec 2019 05:41:09 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20191224T031903Z
24 Dec 2019 05:41:09 UTC: NOTICE : --- Running action sequence: unpack
24 Dec 2019 05:41:09 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
24 Dec 2019 05:41:09 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
24 Dec 2019 05:41:09 UTC: NOTICE : Removing AutoResume Points ...
24 Dec 2019 05:41:09 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20191224T031903Z
24 Dec 2019 05:41:09 UTC: NOTICE : Clearing the chroot path ...
24 Dec 2019 05:41:09 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20191224T031903Z
24 Dec 2019 05:41:09 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20191224T031903Z.tar.xz
24 Dec 2019 05:41:09 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20191224T031903Z (this may take some time) ..
24 Dec 2019 05:41:26 UTC: NOTICE : --- Running action sequence: unpack_snapshot
24 Dec 2019 05:41:26 UTC: NOTICE : --- Running action sequence: config_profile_link
24 Dec 2019 05:41:26 UTC: NOTICE : --- Running action sequence: setup_confdir
24 Dec 2019 05:41:27 UTC: NOTICE : --- Running action sequence: portage_overlay
24 Dec 2019 05:41:27 UTC: NOTICE : --- Running action sequence: bind
24 Dec 2019 05:41:27 UTC: NOTICE : --- Running action sequence: chroot_setup
24 Dec 2019 05:41:27 UTC: NOTICE : Setting up chroot...
24 Dec 2019 05:41:27 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
24 Dec 2019 05:41:27 UTC: WARNING : If your build fails look here first as the possible problem.
24 Dec 2019 05:41:27 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
24 Dec 2019 05:41:27 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
24 Dec 2019 05:41:27 UTC: WARNING : You have been warned.
24 Dec 2019 05:41:27 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20191224T031903Z/etc/portage/make.conf
24 Dec 2019 05:41:27 UTC: NOTICE : STICKY-CONFIG is enabled
24 Dec 2019 05:41:27 UTC: NOTICE : --- Running action sequence: setup_environment
24 Dec 2019 05:41:27 UTC: NOTICE : --- Running action sequence: run_local
24 Dec 2019 05:41:27 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191224T031903Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191224T031903Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20191224T031903Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Emerging binary (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20191224T031903Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20191224T031903Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191224T031903Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191224T031903Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20191224T031903Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.1 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (3 of 3) virtual/libelf-3::gentoo
>>> Installing (3 of 3) virtual/libelf-3::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.86:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.1^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191224T031903Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191224T031903Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191224T031903Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191224T031903Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20191224T031903Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.86-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
24 Dec 2019 06:23:06 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
24 Dec 2019 06:23:06 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
24 Dec 2019 06:23:06 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1628, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1597, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
24 Dec 2019 06:23:06 UTC: NOTICE : Cleaning up... Running unbind()
24 Dec 2019 06:23:06 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191224T031903Z/tmp/kerncache is not a mount point. Skipping
24 Dec 2019 06:23:06 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191224T031903Z/var/cache/binpkgs is not a mount point. Skipping
24 Dec 2019 06:23:06 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191224T031903Z/run is not a mount point. Skipping
24 Dec 2019 06:23:06 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191224T031903Z/dev/shm does not exist. Skipping
24 Dec 2019 06:23:06 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191224T031903Z/dev/pts does not exist. Skipping
24 Dec 2019 06:23:06 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191224T031903Z/var/tmp/portage is not a mount point. Skipping
24 Dec 2019 06:23:06 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191224T031903Z/var/cache/distfiles is not a mount point. Skipping
24 Dec 2019 06:23:06 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191224T031903Z/var/db/repos/gentoo is not a mount point. Skipping
24 Dec 2019 06:23:06 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191224T031903Z/dev is not a mount point. Skipping
24 Dec 2019 06:23:06 UTC: NOTICE : /home/catalyst/tmp/default/livecd-stage2-ia64-20191224T031903Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4403.91user 211.98system 41:58.88elapsed 183%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (0major+19612949minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191224T031903Z.HstRyI/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-12-23 6:56 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-12-23 6:56 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
23 Dec 2019 06:11:26 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
23 Dec 2019 06:11:26 UTC: NOTICE : conf_values[options] = {'kerncache', 'bindist', 'autoresume', 'snapcache', 'pkgcache', 'clear-autoresume'}
23 Dec 2019 06:11:26 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec
23 Dec 2019 06:11:26 UTC: NOTICE : Using target: livecd-stage2
23 Dec 2019 06:11:26 UTC: NOTICE : Source file specification matching setting is: strict
23 Dec 2019 06:11:26 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
23 Dec 2019 06:11:28 UTC: NOTICE : Source path set to /home/catalyst/builds/default/livecd-stage1-ia64-20191223T034604Z.tar.xz
23 Dec 2019 06:11:28 UTC: NOTICE : Removing AutoResume Points ...
23 Dec 2019 06:11:28 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20191223T034604Z
23 Dec 2019 06:11:28 UTC: NOTICE : --- Running action sequence: unpack
23 Dec 2019 06:11:28 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
23 Dec 2019 06:11:28 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
23 Dec 2019 06:11:28 UTC: NOTICE : Removing AutoResume Points ...
23 Dec 2019 06:11:28 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20191223T034604Z
23 Dec 2019 06:11:28 UTC: NOTICE : Clearing the chroot path ...
23 Dec 2019 06:11:28 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/livecd-stage2-ia64-20191223T034604Z
23 Dec 2019 06:11:28 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/livecd-stage1-ia64-20191223T034604Z.tar.xz
23 Dec 2019 06:11:28 UTC: NOTICE : to /home/catalyst/tmp/default/livecd-stage2-ia64-20191223T034604Z (this may take some time) ..
23 Dec 2019 06:11:45 UTC: NOTICE : --- Running action sequence: unpack_snapshot
23 Dec 2019 06:11:45 UTC: NOTICE : --- Running action sequence: config_profile_link
23 Dec 2019 06:11:45 UTC: NOTICE : --- Running action sequence: setup_confdir
23 Dec 2019 06:11:45 UTC: NOTICE : --- Running action sequence: portage_overlay
23 Dec 2019 06:11:45 UTC: NOTICE : --- Running action sequence: bind
23 Dec 2019 06:11:45 UTC: NOTICE : --- Running action sequence: chroot_setup
23 Dec 2019 06:11:45 UTC: NOTICE : Setting up chroot...
23 Dec 2019 06:11:45 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
23 Dec 2019 06:11:45 UTC: WARNING : If your build fails look here first as the possible problem.
23 Dec 2019 06:11:45 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
23 Dec 2019 06:11:45 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
23 Dec 2019 06:11:45 UTC: WARNING : You have been warned.
23 Dec 2019 06:11:45 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/livecd-stage2-ia64-20191223T034604Z/etc/portage/make.conf
23 Dec 2019 06:11:45 UTC: NOTICE : STICKY-CONFIG is enabled
23 Dec 2019 06:11:45 UTC: NOTICE : --- Running action sequence: setup_environment
23 Dec 2019 06:11:45 UTC: NOTICE : --- Running action sequence: run_local
23 Dec 2019 06:11:45 UTC: NOTICE : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191223T034604Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191223T034604Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20191223T034604Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191215
>>> Emerging binary (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 4) app-arch/cpio-2.12-r1::gentoo
>>> Emerging (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging binary (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (3 of 4) sys-kernel/linux-firmware-20191215::gentoo
>>> Installing (2 of 4) sys-devel/autoconf-archive-2018.03.13::gentoo
>>> Emerging (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
>>> Installing (4 of 4) sys-kernel/genkernel-4.0.1::gentoo
* Messages for package sys-kernel/linux-firmware-20191215:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /etc/portage/savedconfig/sys-kernel/linux-firmware
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'sys-kernel/linux-firmware-20191215' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* USE=savedconfig is active. You must handle file collisions manually.
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20191223T034604Z/tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20191223T034604Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191223T034604Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20191223T034604Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20191223T034604Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
Genkernel version 4.0.1 found ... OK
emerge --quiet --update --newuse --onlydeps gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (2 of 3) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging (3 of 3) virtual/libelf-3::gentoo
>>> Installing (3 of 3) virtual/libelf-3::gentoo
Pending updates for gentoo-sources, removing package.provided
rm: cannot remove '/etc/portage/profile/package.provided': No such file or directory
emerge --quiet --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.19.86:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
WARNING: Will unset existing variable 'MAKEOPTS' to avoid clashing with genkernel config ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 4.0.1^[[0m
^[[32;01m*^[[0m Using genkernel configuration from '/etc/genkernel.conf' ...
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191223T034604Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191223T034604Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191223T034604Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191223T034604Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[33;01m*^[[0m Kerncache '/tmp/kerncache/gentoo-kerncache-20191223T034604Z.tar.bz2' does not exist (yet?); Ignoring ...
^[[32;01m*^[[0m Working with Linux kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m
^[[32;01m*^[[0m Using kernel config file '/var/tmp/gentoo.config' ...
^[[32;01m*^[[0m
^[[32;01m*^[[0m Note: The version above is subject to change (depends on config and status of kernel sources).
^[[32;01m*^[[0m kernel: >> Initializing ...
^[[32;01m*^[[0m >> Running 'make mrproper' ...
^[[32;01m*^[[0m >> Running 'make oldconfig' ...
^[[32;01m*^[[0m >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
^[[32;01m*^[[0m >> Re-running 'make oldconfig' due to changed kernel options ...
^[[32;01m*^[[0m >> Kernel version has changed (probably due to config change) since genkernel start:
^[[32;01m*^[[0m We are now building Linux kernel ^[[0;01m4.19.86-gentoo-ia64^[[0m for ^[[0;01mia64^[[0m ...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo-ia64 ...
^[[31;01m*^[[0m ERROR: compile_kernel(): compile_generic() failed to compile the "" target!
^[[31;01m*^[[0m Please consult '/var/log/genkernel.log' for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m '/var/log/genkernel.log' so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do ^[[0;01m*not*^[[0m report ^[[0;01mkernel^[[0m compilation failures as genkernel bugs!
^[[31;01m*^[[0m
23 Dec 2019 06:56:15 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
23 Dec 2019 06:56:15 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
23 Dec 2019 06:56:15 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
23 Dec 2019 06:56:15 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
4451.10user 216.26system 44:49.13elapsed 173%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (0major+20332751minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191223T034604Z.772GEQ/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-12-22 6:33 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-12-22 6:33 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.5.3.3^[[0m
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191222T034603Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191222T034603Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191222T034603Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191222T034603Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Thermal Zone (ACPI_THERMAL) [Y/n/m/?] y
^[[31;01m*^[[0m NUMA support (ACPI_NUMA) [Y/?] y
^[[31;01m*^[[0m Debug Statements (ACPI_DEBUG) [N/y/?] n
^[[31;01m*^[[0m PCI slot detection driver (ACPI_PCI_SLOT) [N/y/?] n
^[[31;01m*^[[0m Container and Module Devices (ACPI_CONTAINER) [Y/?] y
^[[31;01m*^[[0m Hardware ^[[1m^[[KError ^[[m^[[KDevice (ACPI_HED) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Bus options (PCI, PCMCIA)
^[[31;01m*^[[0m
^[[31;01m*^[[0mPCI support (PCI) [Y/?] y
^[[31;01m*^[[0mPCI Express Port Bus support (PCIEPORTBUS) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Hotplug driver (HOTPLUG_PCI_PCIE) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Advanced ^[[1m^[[KError ^[[m^[[KReporting support (PCIEAER) [Y/n/?] y
^[[31;01m*^[[0m PCI Express ^[[1m^[[Kerror ^[[m^[[Kinjection support (PCIEAER_INJECT) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Inter-FE based on IETF ForCES InterFE LFB
^[[31;01m*^[[0m *
^[[31;01m*^[[0m Inter-FE based on IETF ForCES InterFE LFB (NET_IFE) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Network light weight tunnels (LWTUNNEL) [N/y/?] (NEW)
^[[31;01m*^[[0m Network physical/parent device Netlink interface (NET_DEVLINK) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Generic ^[[1m^[[Kfail^[[m^[[Kover module (^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSCSI OnStream SC-x0 tape support (CHR_DEV_OSST) [N/m/y/?] n
^[[31;01m*^[[0mSCSI CDROM support (BLK_DEV_SR) [Y/n/m/?] y
^[[31;01m*^[[0m Enable vendor-specific extensions (for SCSI CDROM) (BLK_DEV_SR_VENDOR) [Y/n/?] y
^[[31;01m*^[[0mSCSI generic support (CHR_DEV_SG) [Y/n/m/?] y
^[[31;01m*^[[0mSCSI media changer support (CHR_DEV_SCH) [N/m/y/?] n
^[[31;01m*^[[0mVerbose SCSI ^[[1m^[[Kerror ^[[m^[[Kreporting (kernel size += 36K) (SCSI_CONSTANTS) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mOSD-Initiator library (SCSI_OSD_INITIATOR) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers (libata)
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (libata) (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Enable WiMAX (Networking options) to see the WiMAX drivers
^[[31;01m*^[[0m *
^[[31;01m*^[[0m VMware VMXNET3 ethernet driver (VMXNET3) [N/m/y/?] n
^[[31;01m*^[[0m FUJITSU Extended Socket Network Device driver (FUJITSU_ES) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Simulated networking device (NETDEVSIM) [N/m/y/?] (NEW)
^[[31;01m*^[[0m ^[[1m^[[KFail^[[m^[[Kover driver (NET_^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS online metadata check support (XFS_ONLINE_SCRUB) [N/y/?] (NEW)
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mEnable tracing for RCU (RCU_TRACE) [N/y/?] n
^[[31;01m*^[[0mProvide debugging asserts for adding NO_HZ support to an arch (RCU_EQS_DEBUG) [N/y/?] (NEW)
^[[31;01m*^[[0mForce round-robin CPU selection for unbound work items (DEBUG_WQ_FORCE_RR_CPU) [N/y/?] (NEW)
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mEnable CPU hotplug state control (CPU_HOTPLUG_STATE_CONTROL) [N/y/?] (NEW)
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m UPD include/generated/timeconst.h
^[[31;01m*^[[0m UPD include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m UPD include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m HOSTCC scripts/mod/file2alias.o
^[[31;01m*^[[0m HOSTCC scripts/conmakehash
^[[31;01m*^[[0m HOSTLD scripts/genksyms/genksyms
^[[31;01m*^[[0m HOSTCC scripts/mod/sumversion.o
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC fs/ext4/dir.o
^[[31;01m*^[[0m AR kernel/sched/built-in.a
^[[31;01m*^[[0m CC kernel/fork.o
^[[31;01m*^[[0m CC kernel/time/ntp.o
^[[31;01m*^[[0m CC fs/ext4/ext4_jbd2.o
^[[31;01m*^[[0mkernel/fork.c:723:13: ^[[1m^[[Kwarning^[[m^[[K: 'task_struct_whitelist' defined but not used [-Wunused-function]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./include/linux/wait.h:7,
^[[31;01m*^[[0m from ./include/linux/wait_bit.h:8,
^[[31;01m*^[[0m from ./include/linux/fs.h:6,
^[[31;01m*^[[0m from fs/ocfs2/file.c:27:
^[[31;01m*^[[0mfs/ocfs2/file.c: In function 'ocfs2_file_write_iter':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC fs/xfs/libxfs/xfs_sb.o
^[[31;01m*^[[0m CC drivers/input/mouse/focaltech.o
^[[31;01m*^[[0m CC net/core/net_namespace.o
^[[31;01m*^[[0mduring RTL pass: mach
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c: In function 'LZ4_decompress_fast':
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c:358:1: internal compiler ^[[1m^[[Kerror:^[[m^[[K in sel_target_adjust_priority, at sel-sched.c:3334
^[[31;01m*^[[0m 358 | }
^[[31;01m*^[[0m | ^
^[[31;01m*^[[0mPlease submit a full bug report,
^[[31;01m*^[[0mwith preprocessed source if appropriate.
^[[31;01m*^[[0mSee <https://bugs.gentoo.org/> for instructions.
^[[31;01m*^[[0mmake[2]: *** [scripts/Makefile.build:304: lib/lz4/lz4_decompress.o] ^[[1m^[[KError ^[[m^[[K1
^[[31;01m*^[[0mmake[1]: *** [scripts/Makefile.build:544: lib/lz4] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0mmake: *** [Makefile:1052: lib] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./arch/ia64/include/asm/intrinsics.h:11,
^[[31;01m*^[[0m from ./arch/ia64/include/asm/bitops.h:19,
^[[31;01m*^[[0m from ./include/linux/bitops.h:19,
^[[31;01m*^[[0m from drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:11:
^[[31;01m*^[[0mdrivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function 'ixgbevf_xdp_setup':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191222T034603Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191222T034603Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191222T034603Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191222T034603Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
22 Dec 2019 06:33:44 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
22 Dec 2019 06:33:44 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
22 Dec 2019 06:33:44 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
22 Dec 2019 06:33:44 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
4452.18user 210.46system 30:02.01elapsed 258%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (0major+19568094minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191222T034603Z.rVcGSa/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-12-21 6:38 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-12-21 6:38 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.5.3.3^[[0m
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191221T034404Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191221T034404Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191221T034404Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191221T034404Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Thermal Zone (ACPI_THERMAL) [Y/n/m/?] y
^[[31;01m*^[[0m NUMA support (ACPI_NUMA) [Y/?] y
^[[31;01m*^[[0m Debug Statements (ACPI_DEBUG) [N/y/?] n
^[[31;01m*^[[0m PCI slot detection driver (ACPI_PCI_SLOT) [N/y/?] n
^[[31;01m*^[[0m Container and Module Devices (ACPI_CONTAINER) [Y/?] y
^[[31;01m*^[[0m Hardware ^[[1m^[[KError ^[[m^[[KDevice (ACPI_HED) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Bus options (PCI, PCMCIA)
^[[31;01m*^[[0m
^[[31;01m*^[[0mPCI support (PCI) [Y/?] y
^[[31;01m*^[[0mPCI Express Port Bus support (PCIEPORTBUS) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Hotplug driver (HOTPLUG_PCI_PCIE) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Advanced ^[[1m^[[KError ^[[m^[[KReporting support (PCIEAER) [Y/n/?] y
^[[31;01m*^[[0m PCI Express ^[[1m^[[Kerror ^[[m^[[Kinjection support (PCIEAER_INJECT) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Inter-FE based on IETF ForCES InterFE LFB
^[[31;01m*^[[0m *
^[[31;01m*^[[0m Inter-FE based on IETF ForCES InterFE LFB (NET_IFE) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Network light weight tunnels (LWTUNNEL) [N/y/?] (NEW)
^[[31;01m*^[[0m Network physical/parent device Netlink interface (NET_DEVLINK) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Generic ^[[1m^[[Kfail^[[m^[[Kover module (^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSCSI OnStream SC-x0 tape support (CHR_DEV_OSST) [N/m/y/?] n
^[[31;01m*^[[0mSCSI CDROM support (BLK_DEV_SR) [Y/n/m/?] y
^[[31;01m*^[[0m Enable vendor-specific extensions (for SCSI CDROM) (BLK_DEV_SR_VENDOR) [Y/n/?] y
^[[31;01m*^[[0mSCSI generic support (CHR_DEV_SG) [Y/n/m/?] y
^[[31;01m*^[[0mSCSI media changer support (CHR_DEV_SCH) [N/m/y/?] n
^[[31;01m*^[[0mVerbose SCSI ^[[1m^[[Kerror ^[[m^[[Kreporting (kernel size += 36K) (SCSI_CONSTANTS) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mOSD-Initiator library (SCSI_OSD_INITIATOR) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers (libata)
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (libata) (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Enable WiMAX (Networking options) to see the WiMAX drivers
^[[31;01m*^[[0m *
^[[31;01m*^[[0m VMware VMXNET3 ethernet driver (VMXNET3) [N/m/y/?] n
^[[31;01m*^[[0m FUJITSU Extended Socket Network Device driver (FUJITSU_ES) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Simulated networking device (NETDEVSIM) [N/m/y/?] (NEW)
^[[31;01m*^[[0m ^[[1m^[[KFail^[[m^[[Kover driver (NET_^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS online metadata check support (XFS_ONLINE_SCRUB) [N/y/?] (NEW)
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mEnable tracing for RCU (RCU_TRACE) [N/y/?] n
^[[31;01m*^[[0mProvide debugging asserts for adding NO_HZ support to an arch (RCU_EQS_DEBUG) [N/y/?] (NEW)
^[[31;01m*^[[0mForce round-robin CPU selection for unbound work items (DEBUG_WQ_FORCE_RR_CPU) [N/y/?] (NEW)
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mEnable CPU hotplug state control (CPU_HOTPLUG_STATE_CONTROL) [N/y/?] (NEW)
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m UPD include/generated/timeconst.h
^[[31;01m*^[[0m UPD include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m UPD include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC scripts/mod/empty.o
^[[31;01m*^[[0m CC scripts/mod/devicetable-offsets.s
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m UPD scripts/mod/devicetable-offsets.h
^[[31;01m*^[[0m HOSTCC scripts/bin2c
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/time/timekeeping_debug.o
^[[31;01m*^[[0m AR kernel/time/built-in.a
^[[31;01m*^[[0m CC kernel/fork.o
^[[31;01m*^[[0m CC [M] crypto/ecb.o
^[[31;01m*^[[0m CC [M] crypto/cbc.o
^[[31;01m*^[[0mkernel/fork.c:723:13: ^[[1m^[[Kwarning^[[m^[[K: 'task_struct_whitelist' defined but not used [-Wunused-function]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./include/linux/wait.h:7,
^[[31;01m*^[[0m from ./include/linux/wait_bit.h:8,
^[[31;01m*^[[0m from ./include/linux/fs.h:6,
^[[31;01m*^[[0m from fs/ocfs2/file.c:27:
^[[31;01m*^[[0mfs/ocfs2/file.c: In function 'ocfs2_file_write_iter':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m HOSTCC lib/gen_crc32table
^[[31;01m*^[[0m CC lib/lz4/lz4_decompress.o
^[[31;01m*^[[0m CC [M] fs/ocfs2/acl.o
^[[31;01m*^[[0mduring RTL pass: mach
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c: In function 'LZ4_decompress_fast':
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c:358:1: internal compiler ^[[1m^[[Kerror:^[[m^[[K in sel_target_adjust_priority, at sel-sched.c:3334
^[[31;01m*^[[0m 358 | }
^[[31;01m*^[[0m | ^
^[[31;01m*^[[0mPlease submit a full bug report,
^[[31;01m*^[[0mwith preprocessed source if appropriate.
^[[31;01m*^[[0mSee <https://bugs.gentoo.org/> for instructions.
^[[31;01m*^[[0mmake[2]: *** [scripts/Makefile.build:304: lib/lz4/lz4_decompress.o] ^[[1m^[[KError ^[[m^[[K1
^[[31;01m*^[[0mmake[1]: *** [scripts/Makefile.build:544: lib/lz4] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0mmake: *** [Makefile:1052: lib] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./arch/ia64/include/asm/intrinsics.h:11,
^[[31;01m*^[[0m from ./arch/ia64/include/asm/bitops.h:19,
^[[31;01m*^[[0m from ./include/linux/bitops.h:19,
^[[31;01m*^[[0m from drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:11:
^[[31;01m*^[[0mdrivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function 'ixgbevf_xdp_setup':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191221T034404Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191221T034404Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191221T034404Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191221T034404Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
21 Dec 2019 06:38:02 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
21 Dec 2019 06:38:03 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
21 Dec 2019 06:38:03 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
21 Dec 2019 06:38:03 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
4463.21user 209.35system 29:49.52elapsed 261%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (4major+19573930minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191221T034404Z.40sJhX/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-12-20 6:51 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-12-20 6:51 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.5.3.3^[[0m
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191220T034005Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191220T034005Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191220T034005Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191220T034005Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Thermal Zone (ACPI_THERMAL) [Y/n/m/?] y
^[[31;01m*^[[0m NUMA support (ACPI_NUMA) [Y/?] y
^[[31;01m*^[[0m Debug Statements (ACPI_DEBUG) [N/y/?] n
^[[31;01m*^[[0m PCI slot detection driver (ACPI_PCI_SLOT) [N/y/?] n
^[[31;01m*^[[0m Container and Module Devices (ACPI_CONTAINER) [Y/?] y
^[[31;01m*^[[0m Hardware ^[[1m^[[KError ^[[m^[[KDevice (ACPI_HED) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Bus options (PCI, PCMCIA)
^[[31;01m*^[[0m
^[[31;01m*^[[0mPCI support (PCI) [Y/?] y
^[[31;01m*^[[0mPCI Express Port Bus support (PCIEPORTBUS) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Hotplug driver (HOTPLUG_PCI_PCIE) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Advanced ^[[1m^[[KError ^[[m^[[KReporting support (PCIEAER) [Y/n/?] y
^[[31;01m*^[[0m PCI Express ^[[1m^[[Kerror ^[[m^[[Kinjection support (PCIEAER_INJECT) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Inter-FE based on IETF ForCES InterFE LFB
^[[31;01m*^[[0m *
^[[31;01m*^[[0m Inter-FE based on IETF ForCES InterFE LFB (NET_IFE) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Network light weight tunnels (LWTUNNEL) [N/y/?] (NEW)
^[[31;01m*^[[0m Network physical/parent device Netlink interface (NET_DEVLINK) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Generic ^[[1m^[[Kfail^[[m^[[Kover module (^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSCSI OnStream SC-x0 tape support (CHR_DEV_OSST) [N/m/y/?] n
^[[31;01m*^[[0mSCSI CDROM support (BLK_DEV_SR) [Y/n/m/?] y
^[[31;01m*^[[0m Enable vendor-specific extensions (for SCSI CDROM) (BLK_DEV_SR_VENDOR) [Y/n/?] y
^[[31;01m*^[[0mSCSI generic support (CHR_DEV_SG) [Y/n/m/?] y
^[[31;01m*^[[0mSCSI media changer support (CHR_DEV_SCH) [N/m/y/?] n
^[[31;01m*^[[0mVerbose SCSI ^[[1m^[[Kerror ^[[m^[[Kreporting (kernel size += 36K) (SCSI_CONSTANTS) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mOSD-Initiator library (SCSI_OSD_INITIATOR) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers (libata)
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (libata) (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Enable WiMAX (Networking options) to see the WiMAX drivers
^[[31;01m*^[[0m *
^[[31;01m*^[[0m VMware VMXNET3 ethernet driver (VMXNET3) [N/m/y/?] n
^[[31;01m*^[[0m FUJITSU Extended Socket Network Device driver (FUJITSU_ES) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Simulated networking device (NETDEVSIM) [N/m/y/?] (NEW)
^[[31;01m*^[[0m ^[[1m^[[KFail^[[m^[[Kover driver (NET_^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS online metadata check support (XFS_ONLINE_SCRUB) [N/y/?] (NEW)
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mEnable tracing for RCU (RCU_TRACE) [N/y/?] n
^[[31;01m*^[[0mProvide debugging asserts for adding NO_HZ support to an arch (RCU_EQS_DEBUG) [N/y/?] (NEW)
^[[31;01m*^[[0mForce round-robin CPU selection for unbound work items (DEBUG_WQ_FORCE_RR_CPU) [N/y/?] (NEW)
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mEnable CPU hotplug state control (CPU_HOTPLUG_STATE_CONTROL) [N/y/?] (NEW)
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m UPD include/generated/timeconst.h
^[[31;01m*^[[0m UPD include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m UPD include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m HOSTCC scripts/conmakehash
^[[31;01m*^[[0m HOSTCC scripts/mod/file2alias.o
^[[31;01m*^[[0m HOSTCC scripts/mod/sumversion.o
^[[31;01m*^[[0m HOSTLD scripts/genksyms/genksyms
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC fs/ext2/symlink.o
^[[31;01m*^[[0m CC fs/ext4/block_validity.o
^[[31;01m*^[[0m CC fs/ext2/xattr.o
^[[31;01m*^[[0m AR mm/built-in.a
^[[31;01m*^[[0m CC kernel/exec_domain.o
^[[31;01m*^[[0mkernel/fork.c:723:13: ^[[1m^[[Kwarning^[[m^[[K: 'task_struct_whitelist' defined but not used [-Wunused-function]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./include/linux/wait.h:7,
^[[31;01m*^[[0m from ./include/linux/wait_bit.h:8,
^[[31;01m*^[[0m from ./include/linux/fs.h:6,
^[[31;01m*^[[0m from fs/ocfs2/file.c:27:
^[[31;01m*^[[0mfs/ocfs2/file.c: In function 'ocfs2_file_write_iter':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC lib/lz4/lz4_decompress.o
^[[31;01m*^[[0m CC fs/inode.o
^[[31;01m*^[[0m CC drivers/input/mouse/trackpoint.o
^[[31;01m*^[[0mduring RTL pass: mach
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c: In function 'LZ4_decompress_fast':
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c:358:1: internal compiler ^[[1m^[[Kerror:^[[m^[[K in sel_target_adjust_priority, at sel-sched.c:3334
^[[31;01m*^[[0m 358 | }
^[[31;01m*^[[0m | ^
^[[31;01m*^[[0mPlease submit a full bug report,
^[[31;01m*^[[0mwith preprocessed source if appropriate.
^[[31;01m*^[[0mSee <https://bugs.gentoo.org/> for instructions.
^[[31;01m*^[[0mmake[2]: *** [scripts/Makefile.build:304: lib/lz4/lz4_decompress.o] ^[[1m^[[KError ^[[m^[[K1
^[[31;01m*^[[0mmake[1]: *** [scripts/Makefile.build:544: lib/lz4] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0mmake: *** [Makefile:1052: lib] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./arch/ia64/include/asm/intrinsics.h:11,
^[[31;01m*^[[0m from ./arch/ia64/include/asm/bitops.h:19,
^[[31;01m*^[[0m from ./include/linux/bitops.h:19,
^[[31;01m*^[[0m from drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:11:
^[[31;01m*^[[0mdrivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function 'ixgbevf_xdp_setup':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191220T034005Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191220T034005Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191220T034005Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191220T034005Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
20 Dec 2019 06:51:37 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
20 Dec 2019 06:51:37 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
20 Dec 2019 06:51:37 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
20 Dec 2019 06:51:37 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
4450.65user 208.16system 30:09.84elapsed 257%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (0major+19564925minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191220T034005Z.8yfM4s/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-12-19 5:59 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-12-19 5:59 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.5.3.3^[[0m
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191219T031004Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191219T031004Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191219T031004Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191219T031004Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Thermal Zone (ACPI_THERMAL) [Y/n/m/?] y
^[[31;01m*^[[0m NUMA support (ACPI_NUMA) [Y/?] y
^[[31;01m*^[[0m Debug Statements (ACPI_DEBUG) [N/y/?] n
^[[31;01m*^[[0m PCI slot detection driver (ACPI_PCI_SLOT) [N/y/?] n
^[[31;01m*^[[0m Container and Module Devices (ACPI_CONTAINER) [Y/?] y
^[[31;01m*^[[0m Hardware ^[[1m^[[KError ^[[m^[[KDevice (ACPI_HED) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Bus options (PCI, PCMCIA)
^[[31;01m*^[[0m
^[[31;01m*^[[0mPCI support (PCI) [Y/?] y
^[[31;01m*^[[0mPCI Express Port Bus support (PCIEPORTBUS) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Hotplug driver (HOTPLUG_PCI_PCIE) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Advanced ^[[1m^[[KError ^[[m^[[KReporting support (PCIEAER) [Y/n/?] y
^[[31;01m*^[[0m PCI Express ^[[1m^[[Kerror ^[[m^[[Kinjection support (PCIEAER_INJECT) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Inter-FE based on IETF ForCES InterFE LFB
^[[31;01m*^[[0m *
^[[31;01m*^[[0m Inter-FE based on IETF ForCES InterFE LFB (NET_IFE) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Network light weight tunnels (LWTUNNEL) [N/y/?] (NEW)
^[[31;01m*^[[0m Network physical/parent device Netlink interface (NET_DEVLINK) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Generic ^[[1m^[[Kfail^[[m^[[Kover module (^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSCSI OnStream SC-x0 tape support (CHR_DEV_OSST) [N/m/y/?] n
^[[31;01m*^[[0mSCSI CDROM support (BLK_DEV_SR) [Y/n/m/?] y
^[[31;01m*^[[0m Enable vendor-specific extensions (for SCSI CDROM) (BLK_DEV_SR_VENDOR) [Y/n/?] y
^[[31;01m*^[[0mSCSI generic support (CHR_DEV_SG) [Y/n/m/?] y
^[[31;01m*^[[0mSCSI media changer support (CHR_DEV_SCH) [N/m/y/?] n
^[[31;01m*^[[0mVerbose SCSI ^[[1m^[[Kerror ^[[m^[[Kreporting (kernel size += 36K) (SCSI_CONSTANTS) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mOSD-Initiator library (SCSI_OSD_INITIATOR) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers (libata)
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (libata) (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Enable WiMAX (Networking options) to see the WiMAX drivers
^[[31;01m*^[[0m *
^[[31;01m*^[[0m VMware VMXNET3 ethernet driver (VMXNET3) [N/m/y/?] n
^[[31;01m*^[[0m FUJITSU Extended Socket Network Device driver (FUJITSU_ES) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Simulated networking device (NETDEVSIM) [N/m/y/?] (NEW)
^[[31;01m*^[[0m ^[[1m^[[KFail^[[m^[[Kover driver (NET_^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS online metadata check support (XFS_ONLINE_SCRUB) [N/y/?] (NEW)
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mEnable tracing for RCU (RCU_TRACE) [N/y/?] n
^[[31;01m*^[[0mProvide debugging asserts for adding NO_HZ support to an arch (RCU_EQS_DEBUG) [N/y/?] (NEW)
^[[31;01m*^[[0mForce round-robin CPU selection for unbound work items (DEBUG_WQ_FORCE_RR_CPU) [N/y/?] (NEW)
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mEnable CPU hotplug state control (CPU_HOTPLUG_STATE_CONTROL) [N/y/?] (NEW)
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m UPD include/generated/timeconst.h
^[[31;01m*^[[0m UPD include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m UPD include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m HOSTCC scripts/genksyms/parse.tab.o
^[[31;01m*^[[0m CC scripts/mod/devicetable-offsets.s
^[[31;01m*^[[0m MKELF scripts/mod/elfconfig.h
^[[31;01m*^[[0m HOSTCC scripts/mod/modpost.o
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m AR fs/nfs/built-in.a
^[[31;01m*^[[0m CC [M] fs/nfs/client.o
^[[31;01m*^[[0m AR kernel/time/built-in.a
^[[31;01m*^[[0m CC kernel/fork.o
^[[31;01m*^[[0m CC fs/ext4/symlink.o
^[[31;01m*^[[0mkernel/fork.c:723:13: ^[[1m^[[Kwarning^[[m^[[K: 'task_struct_whitelist' defined but not used [-Wunused-function]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./include/linux/wait.h:7,
^[[31;01m*^[[0m from ./include/linux/wait_bit.h:8,
^[[31;01m*^[[0m from ./include/linux/fs.h:6,
^[[31;01m*^[[0m from fs/ocfs2/file.c:27:
^[[31;01m*^[[0mfs/ocfs2/file.c: In function 'ocfs2_file_write_iter':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC drivers/acpi/acpica/utresdecode.o
^[[31;01m*^[[0m CC [M] net/8021q/vlanproc.o
^[[31;01m*^[[0m CC drivers/acpi/acpica/utresrc.o
^[[31;01m*^[[0mduring RTL pass: mach
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c: In function 'LZ4_decompress_fast':
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c:358:1: internal compiler ^[[1m^[[Kerror:^[[m^[[K in sel_target_adjust_priority, at sel-sched.c:3334
^[[31;01m*^[[0m 358 | }
^[[31;01m*^[[0m | ^
^[[31;01m*^[[0mPlease submit a full bug report,
^[[31;01m*^[[0mwith preprocessed source if appropriate.
^[[31;01m*^[[0mSee <https://bugs.gentoo.org/> for instructions.
^[[31;01m*^[[0mmake[2]: *** [scripts/Makefile.build:304: lib/lz4/lz4_decompress.o] ^[[1m^[[KError ^[[m^[[K1
^[[31;01m*^[[0mmake[1]: *** [scripts/Makefile.build:544: lib/lz4] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0mmake: *** [Makefile:1052: lib] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./arch/ia64/include/asm/intrinsics.h:11,
^[[31;01m*^[[0m from ./arch/ia64/include/asm/bitops.h:19,
^[[31;01m*^[[0m from ./include/linux/bitops.h:19,
^[[31;01m*^[[0m from drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:11:
^[[31;01m*^[[0mdrivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function 'ixgbevf_xdp_setup':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191219T031004Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191219T031004Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191219T031004Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191219T031004Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
19 Dec 2019 05:59:47 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
19 Dec 2019 05:59:47 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
19 Dec 2019 05:59:47 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
19 Dec 2019 05:59:47 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
4450.54user 213.75system 29:18.39elapsed 265%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (0major+19568839minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191219T031004Z.evz6ok/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-12-18 6:01 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-12-18 6:01 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.5.3.3^[[0m
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191218T031006Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191218T031006Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191218T031006Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191218T031006Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Thermal Zone (ACPI_THERMAL) [Y/n/m/?] y
^[[31;01m*^[[0m NUMA support (ACPI_NUMA) [Y/?] y
^[[31;01m*^[[0m Debug Statements (ACPI_DEBUG) [N/y/?] n
^[[31;01m*^[[0m PCI slot detection driver (ACPI_PCI_SLOT) [N/y/?] n
^[[31;01m*^[[0m Container and Module Devices (ACPI_CONTAINER) [Y/?] y
^[[31;01m*^[[0m Hardware ^[[1m^[[KError ^[[m^[[KDevice (ACPI_HED) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Bus options (PCI, PCMCIA)
^[[31;01m*^[[0m
^[[31;01m*^[[0mPCI support (PCI) [Y/?] y
^[[31;01m*^[[0mPCI Express Port Bus support (PCIEPORTBUS) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Hotplug driver (HOTPLUG_PCI_PCIE) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Advanced ^[[1m^[[KError ^[[m^[[KReporting support (PCIEAER) [Y/n/?] y
^[[31;01m*^[[0m PCI Express ^[[1m^[[Kerror ^[[m^[[Kinjection support (PCIEAER_INJECT) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Inter-FE based on IETF ForCES InterFE LFB
^[[31;01m*^[[0m *
^[[31;01m*^[[0m Inter-FE based on IETF ForCES InterFE LFB (NET_IFE) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Network light weight tunnels (LWTUNNEL) [N/y/?] (NEW)
^[[31;01m*^[[0m Network physical/parent device Netlink interface (NET_DEVLINK) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Generic ^[[1m^[[Kfail^[[m^[[Kover module (^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSCSI OnStream SC-x0 tape support (CHR_DEV_OSST) [N/m/y/?] n
^[[31;01m*^[[0mSCSI CDROM support (BLK_DEV_SR) [Y/n/m/?] y
^[[31;01m*^[[0m Enable vendor-specific extensions (for SCSI CDROM) (BLK_DEV_SR_VENDOR) [Y/n/?] y
^[[31;01m*^[[0mSCSI generic support (CHR_DEV_SG) [Y/n/m/?] y
^[[31;01m*^[[0mSCSI media changer support (CHR_DEV_SCH) [N/m/y/?] n
^[[31;01m*^[[0mVerbose SCSI ^[[1m^[[Kerror ^[[m^[[Kreporting (kernel size += 36K) (SCSI_CONSTANTS) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mOSD-Initiator library (SCSI_OSD_INITIATOR) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers (libata)
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (libata) (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Enable WiMAX (Networking options) to see the WiMAX drivers
^[[31;01m*^[[0m *
^[[31;01m*^[[0m VMware VMXNET3 ethernet driver (VMXNET3) [N/m/y/?] n
^[[31;01m*^[[0m FUJITSU Extended Socket Network Device driver (FUJITSU_ES) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Simulated networking device (NETDEVSIM) [N/m/y/?] (NEW)
^[[31;01m*^[[0m ^[[1m^[[KFail^[[m^[[Kover driver (NET_^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS online metadata check support (XFS_ONLINE_SCRUB) [N/y/?] (NEW)
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mEnable tracing for RCU (RCU_TRACE) [N/y/?] n
^[[31;01m*^[[0mProvide debugging asserts for adding NO_HZ support to an arch (RCU_EQS_DEBUG) [N/y/?] (NEW)
^[[31;01m*^[[0mForce round-robin CPU selection for unbound work items (DEBUG_WQ_FORCE_RR_CPU) [N/y/?] (NEW)
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mEnable CPU hotplug state control (CPU_HOTPLUG_STATE_CONTROL) [N/y/?] (NEW)
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m UPD include/generated/timeconst.h
^[[31;01m*^[[0m UPD include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m UPD include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m YACC scripts/genksyms/parse.tab.c
^[[31;01m*^[[0m LEX scripts/genksyms/lex.lex.c
^[[31;01m*^[[0m YACC scripts/genksyms/parse.tab.h
^[[31;01m*^[[0m HOSTCC scripts/genksyms/parse.tab.o
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m AR kernel/time/built-in.a
^[[31;01m*^[[0m CC kernel/fork.o
^[[31;01m*^[[0m CC kernel/sched/swait.o
^[[31;01m*^[[0m CC mm/rmap.o
^[[31;01m*^[[0m CC [M] fs/configfs/dir.o
^[[31;01m*^[[0mkernel/fork.c:723:13: ^[[1m^[[Kwarning^[[m^[[K: 'task_struct_whitelist' defined but not used [-Wunused-function]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./include/linux/wait.h:7,
^[[31;01m*^[[0m from ./include/linux/wait_bit.h:8,
^[[31;01m*^[[0m from ./include/linux/fs.h:6,
^[[31;01m*^[[0m from fs/ocfs2/file.c:27:
^[[31;01m*^[[0mfs/ocfs2/file.c: In function 'ocfs2_file_write_iter':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC lib/lz4/lz4_decompress.o
^[[31;01m*^[[0m CC fs/xfs/xfs_buf_item.o
^[[31;01m*^[[0m CC net/core/sysctl_net_core.o
^[[31;01m*^[[0mduring RTL pass: mach
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c: In function 'LZ4_decompress_fast':
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c:358:1: internal compiler ^[[1m^[[Kerror:^[[m^[[K in sel_target_adjust_priority, at sel-sched.c:3334
^[[31;01m*^[[0m 358 | }
^[[31;01m*^[[0m | ^
^[[31;01m*^[[0mPlease submit a full bug report,
^[[31;01m*^[[0mwith preprocessed source if appropriate.
^[[31;01m*^[[0mSee <https://bugs.gentoo.org/> for instructions.
^[[31;01m*^[[0mmake[2]: *** [scripts/Makefile.build:304: lib/lz4/lz4_decompress.o] ^[[1m^[[KError ^[[m^[[K1
^[[31;01m*^[[0mmake[1]: *** [scripts/Makefile.build:544: lib/lz4] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0mmake: *** [Makefile:1052: lib] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./arch/ia64/include/asm/intrinsics.h:11,
^[[31;01m*^[[0m from ./arch/ia64/include/asm/bitops.h:19,
^[[31;01m*^[[0m from ./include/linux/bitops.h:19,
^[[31;01m*^[[0m from drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:11:
^[[31;01m*^[[0mdrivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function 'ixgbevf_xdp_setup':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191218T031006Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191218T031006Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191218T031006Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191218T031006Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
18 Dec 2019 06:01:51 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
18 Dec 2019 06:01:51 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
18 Dec 2019 06:01:51 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
18 Dec 2019 06:01:51 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
4450.45user 216.84system 30:31.61elapsed 254%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (17major+19570357minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191218T031006Z.SRRPiB/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-12-17 5:57 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-12-17 5:57 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.5.3.3^[[0m
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191217T031004Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191217T031004Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191217T031004Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191217T031004Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Thermal Zone (ACPI_THERMAL) [Y/n/m/?] y
^[[31;01m*^[[0m NUMA support (ACPI_NUMA) [Y/?] y
^[[31;01m*^[[0m Debug Statements (ACPI_DEBUG) [N/y/?] n
^[[31;01m*^[[0m PCI slot detection driver (ACPI_PCI_SLOT) [N/y/?] n
^[[31;01m*^[[0m Container and Module Devices (ACPI_CONTAINER) [Y/?] y
^[[31;01m*^[[0m Hardware ^[[1m^[[KError ^[[m^[[KDevice (ACPI_HED) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Bus options (PCI, PCMCIA)
^[[31;01m*^[[0m
^[[31;01m*^[[0mPCI support (PCI) [Y/?] y
^[[31;01m*^[[0mPCI Express Port Bus support (PCIEPORTBUS) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Hotplug driver (HOTPLUG_PCI_PCIE) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Advanced ^[[1m^[[KError ^[[m^[[KReporting support (PCIEAER) [Y/n/?] y
^[[31;01m*^[[0m PCI Express ^[[1m^[[Kerror ^[[m^[[Kinjection support (PCIEAER_INJECT) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Inter-FE based on IETF ForCES InterFE LFB
^[[31;01m*^[[0m *
^[[31;01m*^[[0m Inter-FE based on IETF ForCES InterFE LFB (NET_IFE) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Network light weight tunnels (LWTUNNEL) [N/y/?] (NEW)
^[[31;01m*^[[0m Network physical/parent device Netlink interface (NET_DEVLINK) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Generic ^[[1m^[[Kfail^[[m^[[Kover module (^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSCSI OnStream SC-x0 tape support (CHR_DEV_OSST) [N/m/y/?] n
^[[31;01m*^[[0mSCSI CDROM support (BLK_DEV_SR) [Y/n/m/?] y
^[[31;01m*^[[0m Enable vendor-specific extensions (for SCSI CDROM) (BLK_DEV_SR_VENDOR) [Y/n/?] y
^[[31;01m*^[[0mSCSI generic support (CHR_DEV_SG) [Y/n/m/?] y
^[[31;01m*^[[0mSCSI media changer support (CHR_DEV_SCH) [N/m/y/?] n
^[[31;01m*^[[0mVerbose SCSI ^[[1m^[[Kerror ^[[m^[[Kreporting (kernel size += 36K) (SCSI_CONSTANTS) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mOSD-Initiator library (SCSI_OSD_INITIATOR) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers (libata)
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (libata) (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Enable WiMAX (Networking options) to see the WiMAX drivers
^[[31;01m*^[[0m *
^[[31;01m*^[[0m VMware VMXNET3 ethernet driver (VMXNET3) [N/m/y/?] n
^[[31;01m*^[[0m FUJITSU Extended Socket Network Device driver (FUJITSU_ES) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Simulated networking device (NETDEVSIM) [N/m/y/?] (NEW)
^[[31;01m*^[[0m ^[[1m^[[KFail^[[m^[[Kover driver (NET_^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS online metadata check support (XFS_ONLINE_SCRUB) [N/y/?] (NEW)
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mEnable tracing for RCU (RCU_TRACE) [N/y/?] n
^[[31;01m*^[[0mProvide debugging asserts for adding NO_HZ support to an arch (RCU_EQS_DEBUG) [N/y/?] (NEW)
^[[31;01m*^[[0mForce round-robin CPU selection for unbound work items (DEBUG_WQ_FORCE_RR_CPU) [N/y/?] (NEW)
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mEnable CPU hotplug state control (CPU_HOTPLUG_STATE_CONTROL) [N/y/?] (NEW)
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m UPD include/generated/timeconst.h
^[[31;01m*^[[0m UPD include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m UPD include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m HOSTCC scripts/mod/sumversion.o
^[[31;01m*^[[0m HOSTCC scripts/conmakehash
^[[31;01m*^[[0m HOSTCC scripts/mod/file2alias.o
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m HOSTLD scripts/genksyms/genksyms
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC crypto/shash.o
^[[31;01m*^[[0m CC fs/ext4/symlink.o
^[[31;01m*^[[0m AR kernel/time/built-in.a
^[[31;01m*^[[0m CC kernel/fork.o
^[[31;01m*^[[0m CC fs/ext4/sysfs.o
^[[31;01m*^[[0mkernel/fork.c:723:13: ^[[1m^[[Kwarning^[[m^[[K: 'task_struct_whitelist' defined but not used [-Wunused-function]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./include/linux/wait.h:7,
^[[31;01m*^[[0m from ./include/linux/wait_bit.h:8,
^[[31;01m*^[[0m from ./include/linux/fs.h:6,
^[[31;01m*^[[0m from fs/ocfs2/file.c:27:
^[[31;01m*^[[0mfs/ocfs2/file.c: In function 'ocfs2_file_write_iter':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m HOSTCC lib/gen_crc32table
^[[31;01m*^[[0m CC lib/lz4/lz4_decompress.o
^[[31;01m*^[[0m CC fs/xfs/xfs_message.o
^[[31;01m*^[[0mduring RTL pass: mach
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c: In function 'LZ4_decompress_fast':
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c:358:1: internal compiler ^[[1m^[[Kerror:^[[m^[[K in sel_target_adjust_priority, at sel-sched.c:3334
^[[31;01m*^[[0m 358 | }
^[[31;01m*^[[0m | ^
^[[31;01m*^[[0mPlease submit a full bug report,
^[[31;01m*^[[0mwith preprocessed source if appropriate.
^[[31;01m*^[[0mSee <https://bugs.gentoo.org/> for instructions.
^[[31;01m*^[[0mmake[2]: *** [scripts/Makefile.build:304: lib/lz4/lz4_decompress.o] ^[[1m^[[KError ^[[m^[[K1
^[[31;01m*^[[0mmake[1]: *** [scripts/Makefile.build:544: lib/lz4] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0mmake: *** [Makefile:1052: lib] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./arch/ia64/include/asm/intrinsics.h:11,
^[[31;01m*^[[0m from ./arch/ia64/include/asm/bitops.h:19,
^[[31;01m*^[[0m from ./include/linux/bitops.h:19,
^[[31;01m*^[[0m from drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:11:
^[[31;01m*^[[0mdrivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function 'ixgbevf_xdp_setup':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191217T031004Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191217T031004Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191217T031004Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191217T031004Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
17 Dec 2019 05:57:04 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
17 Dec 2019 05:57:04 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
17 Dec 2019 05:57:04 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
17 Dec 2019 05:57:04 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
4449.78user 214.81system 28:54.36elapsed 268%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (0major+19568013minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191217T031004Z.u6lUPJ/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-12-16 6:20 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-12-16 6:20 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.5.3.3^[[0m
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191216T031005Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191216T031005Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191216T031005Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191216T031005Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Thermal Zone (ACPI_THERMAL) [Y/n/m/?] y
^[[31;01m*^[[0m NUMA support (ACPI_NUMA) [Y/?] y
^[[31;01m*^[[0m Debug Statements (ACPI_DEBUG) [N/y/?] n
^[[31;01m*^[[0m PCI slot detection driver (ACPI_PCI_SLOT) [N/y/?] n
^[[31;01m*^[[0m Container and Module Devices (ACPI_CONTAINER) [Y/?] y
^[[31;01m*^[[0m Hardware ^[[1m^[[KError ^[[m^[[KDevice (ACPI_HED) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Bus options (PCI, PCMCIA)
^[[31;01m*^[[0m
^[[31;01m*^[[0mPCI support (PCI) [Y/?] y
^[[31;01m*^[[0mPCI Express Port Bus support (PCIEPORTBUS) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Hotplug driver (HOTPLUG_PCI_PCIE) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Advanced ^[[1m^[[KError ^[[m^[[KReporting support (PCIEAER) [Y/n/?] y
^[[31;01m*^[[0m PCI Express ^[[1m^[[Kerror ^[[m^[[Kinjection support (PCIEAER_INJECT) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Inter-FE based on IETF ForCES InterFE LFB
^[[31;01m*^[[0m *
^[[31;01m*^[[0m Inter-FE based on IETF ForCES InterFE LFB (NET_IFE) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Network light weight tunnels (LWTUNNEL) [N/y/?] (NEW)
^[[31;01m*^[[0m Network physical/parent device Netlink interface (NET_DEVLINK) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Generic ^[[1m^[[Kfail^[[m^[[Kover module (^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSCSI OnStream SC-x0 tape support (CHR_DEV_OSST) [N/m/y/?] n
^[[31;01m*^[[0mSCSI CDROM support (BLK_DEV_SR) [Y/n/m/?] y
^[[31;01m*^[[0m Enable vendor-specific extensions (for SCSI CDROM) (BLK_DEV_SR_VENDOR) [Y/n/?] y
^[[31;01m*^[[0mSCSI generic support (CHR_DEV_SG) [Y/n/m/?] y
^[[31;01m*^[[0mSCSI media changer support (CHR_DEV_SCH) [N/m/y/?] n
^[[31;01m*^[[0mVerbose SCSI ^[[1m^[[Kerror ^[[m^[[Kreporting (kernel size += 36K) (SCSI_CONSTANTS) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mOSD-Initiator library (SCSI_OSD_INITIATOR) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers (libata)
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (libata) (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Enable WiMAX (Networking options) to see the WiMAX drivers
^[[31;01m*^[[0m *
^[[31;01m*^[[0m VMware VMXNET3 ethernet driver (VMXNET3) [N/m/y/?] n
^[[31;01m*^[[0m FUJITSU Extended Socket Network Device driver (FUJITSU_ES) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Simulated networking device (NETDEVSIM) [N/m/y/?] (NEW)
^[[31;01m*^[[0m ^[[1m^[[KFail^[[m^[[Kover driver (NET_^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS online metadata check support (XFS_ONLINE_SCRUB) [N/y/?] (NEW)
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mEnable tracing for RCU (RCU_TRACE) [N/y/?] n
^[[31;01m*^[[0mProvide debugging asserts for adding NO_HZ support to an arch (RCU_EQS_DEBUG) [N/y/?] (NEW)
^[[31;01m*^[[0mForce round-robin CPU selection for unbound work items (DEBUG_WQ_FORCE_RR_CPU) [N/y/?] (NEW)
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mEnable CPU hotplug state control (CPU_HOTPLUG_STATE_CONTROL) [N/y/?] (NEW)
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m UPD include/generated/timeconst.h
^[[31;01m*^[[0m UPD include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m UPD include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m LEX scripts/genksyms/lex.lex.c
^[[31;01m*^[[0m YACC scripts/genksyms/parse.tab.h
^[[31;01m*^[[0m HOSTCC scripts/genksyms/parse.tab.o
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m HOSTCC scripts/genksyms/lex.lex.o
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC mm/page_io.o
^[[31;01m*^[[0m CC kernel/fork.o
^[[31;01m*^[[0m CC mm/swap_state.o
^[[31;01m*^[[0m CC fs/ext4/inline.o
^[[31;01m*^[[0m CC kernel/time/timer.o
^[[31;01m*^[[0mkernel/fork.c:723:13: ^[[1m^[[Kwarning^[[m^[[K: 'task_struct_whitelist' defined but not used [-Wunused-function]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./include/linux/wait.h:7,
^[[31;01m*^[[0m from ./include/linux/wait_bit.h:8,
^[[31;01m*^[[0m from ./include/linux/fs.h:6,
^[[31;01m*^[[0m from fs/ocfs2/file.c:27:
^[[31;01m*^[[0mfs/ocfs2/file.c: In function 'ocfs2_file_write_iter':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC net/core/secure_seq.o
^[[31;01m*^[[0m CC drivers/acpi/fan.o
^[[31;01m*^[[0m CC drivers/acpi/processor_driver.o
^[[31;01m*^[[0mduring RTL pass: mach
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c: In function 'LZ4_decompress_fast':
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c:358:1: internal compiler ^[[1m^[[Kerror:^[[m^[[K in sel_target_adjust_priority, at sel-sched.c:3334
^[[31;01m*^[[0m 358 | }
^[[31;01m*^[[0m | ^
^[[31;01m*^[[0mPlease submit a full bug report,
^[[31;01m*^[[0mwith preprocessed source if appropriate.
^[[31;01m*^[[0mSee <https://bugs.gentoo.org/> for instructions.
^[[31;01m*^[[0mmake[2]: *** [scripts/Makefile.build:304: lib/lz4/lz4_decompress.o] ^[[1m^[[KError ^[[m^[[K1
^[[31;01m*^[[0mmake[1]: *** [scripts/Makefile.build:544: lib/lz4] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0mmake: *** [Makefile:1052: lib] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./arch/ia64/include/asm/intrinsics.h:11,
^[[31;01m*^[[0m from ./arch/ia64/include/asm/bitops.h:19,
^[[31;01m*^[[0m from ./include/linux/bitops.h:19,
^[[31;01m*^[[0m from drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:11:
^[[31;01m*^[[0mdrivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function 'ixgbevf_xdp_setup':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191216T031005Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191216T031005Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191216T031005Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191216T031005Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
16 Dec 2019 06:20:29 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
16 Dec 2019 06:20:29 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
16 Dec 2019 06:20:29 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
16 Dec 2019 06:20:29 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
4503.02user 223.24system 30:38.51elapsed 257%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (0major+19800774minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191216T031005Z.TH2pPW/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-12-15 5:59 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-12-15 5:59 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.5.3.3^[[0m
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191215T031005Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191215T031005Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191215T031005Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191215T031005Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Thermal Zone (ACPI_THERMAL) [Y/n/m/?] y
^[[31;01m*^[[0m NUMA support (ACPI_NUMA) [Y/?] y
^[[31;01m*^[[0m Debug Statements (ACPI_DEBUG) [N/y/?] n
^[[31;01m*^[[0m PCI slot detection driver (ACPI_PCI_SLOT) [N/y/?] n
^[[31;01m*^[[0m Container and Module Devices (ACPI_CONTAINER) [Y/?] y
^[[31;01m*^[[0m Hardware ^[[1m^[[KError ^[[m^[[KDevice (ACPI_HED) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Bus options (PCI, PCMCIA)
^[[31;01m*^[[0m
^[[31;01m*^[[0mPCI support (PCI) [Y/?] y
^[[31;01m*^[[0mPCI Express Port Bus support (PCIEPORTBUS) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Hotplug driver (HOTPLUG_PCI_PCIE) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Advanced ^[[1m^[[KError ^[[m^[[KReporting support (PCIEAER) [Y/n/?] y
^[[31;01m*^[[0m PCI Express ^[[1m^[[Kerror ^[[m^[[Kinjection support (PCIEAER_INJECT) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Inter-FE based on IETF ForCES InterFE LFB
^[[31;01m*^[[0m *
^[[31;01m*^[[0m Inter-FE based on IETF ForCES InterFE LFB (NET_IFE) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Network light weight tunnels (LWTUNNEL) [N/y/?] (NEW)
^[[31;01m*^[[0m Network physical/parent device Netlink interface (NET_DEVLINK) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Generic ^[[1m^[[Kfail^[[m^[[Kover module (^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSCSI OnStream SC-x0 tape support (CHR_DEV_OSST) [N/m/y/?] n
^[[31;01m*^[[0mSCSI CDROM support (BLK_DEV_SR) [Y/n/m/?] y
^[[31;01m*^[[0m Enable vendor-specific extensions (for SCSI CDROM) (BLK_DEV_SR_VENDOR) [Y/n/?] y
^[[31;01m*^[[0mSCSI generic support (CHR_DEV_SG) [Y/n/m/?] y
^[[31;01m*^[[0mSCSI media changer support (CHR_DEV_SCH) [N/m/y/?] n
^[[31;01m*^[[0mVerbose SCSI ^[[1m^[[Kerror ^[[m^[[Kreporting (kernel size += 36K) (SCSI_CONSTANTS) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mOSD-Initiator library (SCSI_OSD_INITIATOR) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers (libata)
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (libata) (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Enable WiMAX (Networking options) to see the WiMAX drivers
^[[31;01m*^[[0m *
^[[31;01m*^[[0m VMware VMXNET3 ethernet driver (VMXNET3) [N/m/y/?] n
^[[31;01m*^[[0m FUJITSU Extended Socket Network Device driver (FUJITSU_ES) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Simulated networking device (NETDEVSIM) [N/m/y/?] (NEW)
^[[31;01m*^[[0m ^[[1m^[[KFail^[[m^[[Kover driver (NET_^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS online metadata check support (XFS_ONLINE_SCRUB) [N/y/?] (NEW)
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mEnable tracing for RCU (RCU_TRACE) [N/y/?] n
^[[31;01m*^[[0mProvide debugging asserts for adding NO_HZ support to an arch (RCU_EQS_DEBUG) [N/y/?] (NEW)
^[[31;01m*^[[0mForce round-robin CPU selection for unbound work items (DEBUG_WQ_FORCE_RR_CPU) [N/y/?] (NEW)
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mEnable CPU hotplug state control (CPU_HOTPLUG_STATE_CONTROL) [N/y/?] (NEW)
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m UPD include/generated/timeconst.h
^[[31;01m*^[[0m UPD include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m UPD include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m LEX scripts/genksyms/lex.lex.c
^[[31;01m*^[[0m YACC scripts/genksyms/parse.tab.h
^[[31;01m*^[[0m HOSTCC scripts/genksyms/parse.tab.o
^[[31;01m*^[[0m HOSTCC scripts/genksyms/lex.lex.o
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/time/timekeeping_debug.o
^[[31;01m*^[[0m AR kernel/time/built-in.a
^[[31;01m*^[[0m CC fs/ext4/hash.o
^[[31;01m*^[[0m CC kernel/fork.o
^[[31;01m*^[[0m CC [M] crypto/sha256_generic.o
^[[31;01m*^[[0mkernel/fork.c:723:13: ^[[1m^[[Kwarning^[[m^[[K: 'task_struct_whitelist' defined but not used [-Wunused-function]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC [M] fs/fuse/acl.o
^[[31;01m*^[[0m CC drivers/acpi/acpica/nsxfobj.o
^[[31;01m*^[[0m CC [M] net/8021q/vlan.o
^[[31;01m*^[[0mduring RTL pass: mach
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c: In function 'LZ4_decompress_fast':
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c:358:1: internal compiler ^[[1m^[[Kerror:^[[m^[[K in sel_target_adjust_priority, at sel-sched.c:3334
^[[31;01m*^[[0m 358 | }
^[[31;01m*^[[0m | ^
^[[31;01m*^[[0mPlease submit a full bug report,
^[[31;01m*^[[0mwith preprocessed source if appropriate.
^[[31;01m*^[[0mSee <https://bugs.gentoo.org/> for instructions.
^[[31;01m*^[[0mmake[2]: *** [scripts/Makefile.build:304: lib/lz4/lz4_decompress.o] ^[[1m^[[KError ^[[m^[[K1
^[[31;01m*^[[0mmake[1]: *** [scripts/Makefile.build:544: lib/lz4] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0mmake: *** [Makefile:1052: lib] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./include/linux/wait.h:7,
^[[31;01m*^[[0m from ./include/linux/wait_bit.h:8,
^[[31;01m*^[[0m from ./include/linux/fs.h:6,
^[[31;01m*^[[0m from fs/ocfs2/file.c:27:
^[[31;01m*^[[0mfs/ocfs2/file.c: In function 'ocfs2_file_write_iter':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./arch/ia64/include/asm/intrinsics.h:11,
^[[31;01m*^[[0m from ./arch/ia64/include/asm/bitops.h:19,
^[[31;01m*^[[0m from ./include/linux/bitops.h:19,
^[[31;01m*^[[0m from drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:11:
^[[31;01m*^[[0mdrivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function 'ixgbevf_xdp_setup':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191215T031005Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191215T031005Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191215T031005Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191215T031005Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
15 Dec 2019 05:59:05 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
15 Dec 2019 05:59:05 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
15 Dec 2019 05:59:05 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
15 Dec 2019 05:59:05 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
4447.60user 213.42system 29:49.27elapsed 260%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (1major+19566396minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191215T031005Z.naYhSF/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-12-14 6:08 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-12-14 6:08 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.5.3.3^[[0m
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191214T031005Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191214T031005Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191214T031005Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191214T031005Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Thermal Zone (ACPI_THERMAL) [Y/n/m/?] y
^[[31;01m*^[[0m NUMA support (ACPI_NUMA) [Y/?] y
^[[31;01m*^[[0m Debug Statements (ACPI_DEBUG) [N/y/?] n
^[[31;01m*^[[0m PCI slot detection driver (ACPI_PCI_SLOT) [N/y/?] n
^[[31;01m*^[[0m Container and Module Devices (ACPI_CONTAINER) [Y/?] y
^[[31;01m*^[[0m Hardware ^[[1m^[[KError ^[[m^[[KDevice (ACPI_HED) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Bus options (PCI, PCMCIA)
^[[31;01m*^[[0m
^[[31;01m*^[[0mPCI support (PCI) [Y/?] y
^[[31;01m*^[[0mPCI Express Port Bus support (PCIEPORTBUS) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Hotplug driver (HOTPLUG_PCI_PCIE) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Advanced ^[[1m^[[KError ^[[m^[[KReporting support (PCIEAER) [Y/n/?] y
^[[31;01m*^[[0m PCI Express ^[[1m^[[Kerror ^[[m^[[Kinjection support (PCIEAER_INJECT) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Inter-FE based on IETF ForCES InterFE LFB
^[[31;01m*^[[0m *
^[[31;01m*^[[0m Inter-FE based on IETF ForCES InterFE LFB (NET_IFE) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Network light weight tunnels (LWTUNNEL) [N/y/?] (NEW)
^[[31;01m*^[[0m Network physical/parent device Netlink interface (NET_DEVLINK) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Generic ^[[1m^[[Kfail^[[m^[[Kover module (^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSCSI OnStream SC-x0 tape support (CHR_DEV_OSST) [N/m/y/?] n
^[[31;01m*^[[0mSCSI CDROM support (BLK_DEV_SR) [Y/n/m/?] y
^[[31;01m*^[[0m Enable vendor-specific extensions (for SCSI CDROM) (BLK_DEV_SR_VENDOR) [Y/n/?] y
^[[31;01m*^[[0mSCSI generic support (CHR_DEV_SG) [Y/n/m/?] y
^[[31;01m*^[[0mSCSI media changer support (CHR_DEV_SCH) [N/m/y/?] n
^[[31;01m*^[[0mVerbose SCSI ^[[1m^[[Kerror ^[[m^[[Kreporting (kernel size += 36K) (SCSI_CONSTANTS) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mOSD-Initiator library (SCSI_OSD_INITIATOR) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers (libata)
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (libata) (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Enable WiMAX (Networking options) to see the WiMAX drivers
^[[31;01m*^[[0m *
^[[31;01m*^[[0m VMware VMXNET3 ethernet driver (VMXNET3) [N/m/y/?] n
^[[31;01m*^[[0m FUJITSU Extended Socket Network Device driver (FUJITSU_ES) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Simulated networking device (NETDEVSIM) [N/m/y/?] (NEW)
^[[31;01m*^[[0m ^[[1m^[[KFail^[[m^[[Kover driver (NET_^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS online metadata check support (XFS_ONLINE_SCRUB) [N/y/?] (NEW)
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mEnable tracing for RCU (RCU_TRACE) [N/y/?] n
^[[31;01m*^[[0mProvide debugging asserts for adding NO_HZ support to an arch (RCU_EQS_DEBUG) [N/y/?] (NEW)
^[[31;01m*^[[0mForce round-robin CPU selection for unbound work items (DEBUG_WQ_FORCE_RR_CPU) [N/y/?] (NEW)
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mEnable CPU hotplug state control (CPU_HOTPLUG_STATE_CONTROL) [N/y/?] (NEW)
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m UPD include/generated/timeconst.h
^[[31;01m*^[[0m UPD include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m UPD include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m HOSTCC scripts/mod/mk_elfconfig
^[[31;01m*^[[0m CC scripts/mod/devicetable-offsets.s
^[[31;01m*^[[0m UPD scripts/mod/devicetable-offsets.h
^[[31;01m*^[[0m HOSTCC scripts/bin2c
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/time/timeconv.o
^[[31;01m*^[[0m CC fs/fat/file.o
^[[31;01m*^[[0m CC kernel/fork.o
^[[31;01m*^[[0m CC kernel/time/timecounter.o
^[[31;01m*^[[0m CC kernel/time/alarmtimer.o
^[[31;01m*^[[0mkernel/fork.c:723:13: ^[[1m^[[Kwarning^[[m^[[K: 'task_struct_whitelist' defined but not used [-Wunused-function]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./include/linux/wait.h:7,
^[[31;01m*^[[0m from ./include/linux/wait_bit.h:8,
^[[31;01m*^[[0m from ./include/linux/fs.h:6,
^[[31;01m*^[[0m from fs/ocfs2/file.c:27:
^[[31;01m*^[[0mfs/ocfs2/file.c: In function 'ocfs2_file_write_iter':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./arch/ia64/include/asm/intrinsics.h:11,
^[[31;01m*^[[0m from ./arch/ia64/include/asm/bitops.h:19,
^[[31;01m*^[[0m from ./include/linux/bitops.h:19,
^[[31;01m*^[[0m from drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:11:
^[[31;01m*^[[0mdrivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function 'ixgbevf_xdp_setup':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m AR drivers/ptp/built-in.a
^[[31;01m*^[[0m CC drivers/ras/ras.o
^[[31;01m*^[[0m CC drivers/ras/debugfs.o
^[[31;01m*^[[0mduring RTL pass: mach
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c: In function 'LZ4_decompress_fast':
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c:358:1: internal compiler ^[[1m^[[Kerror:^[[m^[[K in sel_target_adjust_priority, at sel-sched.c:3334
^[[31;01m*^[[0m 358 | }
^[[31;01m*^[[0m | ^
^[[31;01m*^[[0mPlease submit a full bug report,
^[[31;01m*^[[0mwith preprocessed source if appropriate.
^[[31;01m*^[[0mSee <https://bugs.gentoo.org/> for instructions.
^[[31;01m*^[[0mmake[2]: *** [scripts/Makefile.build:304: lib/lz4/lz4_decompress.o] ^[[1m^[[KError ^[[m^[[K1
^[[31;01m*^[[0mmake[1]: *** [scripts/Makefile.build:544: lib/lz4] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0mmake: *** [Makefile:1052: lib] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191214T031005Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191214T031005Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191214T031005Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191214T031005Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
14 Dec 2019 06:08:16 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
14 Dec 2019 06:08:16 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
14 Dec 2019 06:08:16 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
14 Dec 2019 06:08:16 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
4452.30user 211.71system 30:14.05elapsed 257%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (2major+19565107minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191214T031005Z.JDLx23/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-12-13 7:19 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-12-13 7:19 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.5.3.3^[[0m
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191213T031006Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191213T031006Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191213T031006Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191213T031006Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Thermal Zone (ACPI_THERMAL) [Y/n/m/?] y
^[[31;01m*^[[0m NUMA support (ACPI_NUMA) [Y/?] y
^[[31;01m*^[[0m Debug Statements (ACPI_DEBUG) [N/y/?] n
^[[31;01m*^[[0m PCI slot detection driver (ACPI_PCI_SLOT) [N/y/?] n
^[[31;01m*^[[0m Container and Module Devices (ACPI_CONTAINER) [Y/?] y
^[[31;01m*^[[0m Hardware ^[[1m^[[KError ^[[m^[[KDevice (ACPI_HED) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Bus options (PCI, PCMCIA)
^[[31;01m*^[[0m
^[[31;01m*^[[0mPCI support (PCI) [Y/?] y
^[[31;01m*^[[0mPCI Express Port Bus support (PCIEPORTBUS) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Hotplug driver (HOTPLUG_PCI_PCIE) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Advanced ^[[1m^[[KError ^[[m^[[KReporting support (PCIEAER) [Y/n/?] y
^[[31;01m*^[[0m PCI Express ^[[1m^[[Kerror ^[[m^[[Kinjection support (PCIEAER_INJECT) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Inter-FE based on IETF ForCES InterFE LFB
^[[31;01m*^[[0m *
^[[31;01m*^[[0m Inter-FE based on IETF ForCES InterFE LFB (NET_IFE) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Network light weight tunnels (LWTUNNEL) [N/y/?] (NEW)
^[[31;01m*^[[0m Network physical/parent device Netlink interface (NET_DEVLINK) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Generic ^[[1m^[[Kfail^[[m^[[Kover module (^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSCSI OnStream SC-x0 tape support (CHR_DEV_OSST) [N/m/y/?] n
^[[31;01m*^[[0mSCSI CDROM support (BLK_DEV_SR) [Y/n/m/?] y
^[[31;01m*^[[0m Enable vendor-specific extensions (for SCSI CDROM) (BLK_DEV_SR_VENDOR) [Y/n/?] y
^[[31;01m*^[[0mSCSI generic support (CHR_DEV_SG) [Y/n/m/?] y
^[[31;01m*^[[0mSCSI media changer support (CHR_DEV_SCH) [N/m/y/?] n
^[[31;01m*^[[0mVerbose SCSI ^[[1m^[[Kerror ^[[m^[[Kreporting (kernel size += 36K) (SCSI_CONSTANTS) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mOSD-Initiator library (SCSI_OSD_INITIATOR) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers (libata)
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (libata) (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Enable WiMAX (Networking options) to see the WiMAX drivers
^[[31;01m*^[[0m *
^[[31;01m*^[[0m VMware VMXNET3 ethernet driver (VMXNET3) [N/m/y/?] n
^[[31;01m*^[[0m FUJITSU Extended Socket Network Device driver (FUJITSU_ES) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Simulated networking device (NETDEVSIM) [N/m/y/?] (NEW)
^[[31;01m*^[[0m ^[[1m^[[KFail^[[m^[[Kover driver (NET_^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS online metadata check support (XFS_ONLINE_SCRUB) [N/y/?] (NEW)
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mEnable tracing for RCU (RCU_TRACE) [N/y/?] n
^[[31;01m*^[[0mProvide debugging asserts for adding NO_HZ support to an arch (RCU_EQS_DEBUG) [N/y/?] (NEW)
^[[31;01m*^[[0mForce round-robin CPU selection for unbound work items (DEBUG_WQ_FORCE_RR_CPU) [N/y/?] (NEW)
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mEnable CPU hotplug state control (CPU_HOTPLUG_STATE_CONTROL) [N/y/?] (NEW)
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m UPD include/generated/timeconst.h
^[[31;01m*^[[0m UPD include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m UPD include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m MKELF scripts/mod/elfconfig.h
^[[31;01m*^[[0m HOSTCC scripts/mod/modpost.o
^[[31;01m*^[[0m YACC scripts/genksyms/parse.tab.h
^[[31;01m*^[[0m HOSTCC scripts/genksyms/parse.tab.o
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC [M] crypto/pcbc.o
^[[31;01m*^[[0m CC fs/ext4/hash.o
^[[31;01m*^[[0m CC kernel/time/timecounter.o
^[[31;01m*^[[0m CC kernel/time/alarmtimer.o
^[[31;01m*^[[0m CC [M] crypto/ctr.o
^[[31;01m*^[[0mkernel/fork.c:723:13: ^[[1m^[[Kwarning^[[m^[[K: 'task_struct_whitelist' defined but not used [-Wunused-function]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./include/linux/wait.h:7,
^[[31;01m*^[[0m from ./include/linux/wait_bit.h:8,
^[[31;01m*^[[0m from ./include/linux/fs.h:6,
^[[31;01m*^[[0m from fs/ocfs2/file.c:27:
^[[31;01m*^[[0mfs/ocfs2/file.c: In function 'ocfs2_file_write_iter':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC fs/xfs/xfs_trans_inode.o
^[[31;01m*^[[0m CC fs/xfs/xfs_trans_refcount.o
^[[31;01m*^[[0m CC [M] drivers/md/raid5-cache.o
^[[31;01m*^[[0mduring RTL pass: mach
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c: In function 'LZ4_decompress_fast':
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c:358:1: internal compiler ^[[1m^[[Kerror:^[[m^[[K in sel_target_adjust_priority, at sel-sched.c:3334
^[[31;01m*^[[0m 358 | }
^[[31;01m*^[[0m | ^
^[[31;01m*^[[0mPlease submit a full bug report,
^[[31;01m*^[[0mwith preprocessed source if appropriate.
^[[31;01m*^[[0mSee <https://bugs.gentoo.org/> for instructions.
^[[31;01m*^[[0mmake[2]: *** [scripts/Makefile.build:304: lib/lz4/lz4_decompress.o] ^[[1m^[[KError ^[[m^[[K1
^[[31;01m*^[[0mmake[1]: *** [scripts/Makefile.build:544: lib/lz4] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0mmake: *** [Makefile:1052: lib] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./arch/ia64/include/asm/intrinsics.h:11,
^[[31;01m*^[[0m from ./arch/ia64/include/asm/bitops.h:19,
^[[31;01m*^[[0m from ./include/linux/bitops.h:19,
^[[31;01m*^[[0m from drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:11:
^[[31;01m*^[[0mdrivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function 'ixgbevf_xdp_setup':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191213T031006Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191213T031006Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191213T031006Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191213T031006Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
13 Dec 2019 07:19:33 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
13 Dec 2019 07:19:33 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
13 Dec 2019 07:19:33 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
13 Dec 2019 07:19:33 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
4446.33user 217.30system 29:42.25elapsed 261%CPU (0avgtext+0avgdata 232336maxresident)k
0inputs+0outputs (0major+19565229minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191213T031006Z.3CrVg6/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-12-12 6:01 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-12-12 6:01 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.5.3.3^[[0m
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191212T031003Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191212T031003Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191212T031003Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191212T031003Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Thermal Zone (ACPI_THERMAL) [Y/n/m/?] y
^[[31;01m*^[[0m NUMA support (ACPI_NUMA) [Y/?] y
^[[31;01m*^[[0m Debug Statements (ACPI_DEBUG) [N/y/?] n
^[[31;01m*^[[0m PCI slot detection driver (ACPI_PCI_SLOT) [N/y/?] n
^[[31;01m*^[[0m Container and Module Devices (ACPI_CONTAINER) [Y/?] y
^[[31;01m*^[[0m Hardware ^[[1m^[[KError ^[[m^[[KDevice (ACPI_HED) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Bus options (PCI, PCMCIA)
^[[31;01m*^[[0m
^[[31;01m*^[[0mPCI support (PCI) [Y/?] y
^[[31;01m*^[[0mPCI Express Port Bus support (PCIEPORTBUS) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Hotplug driver (HOTPLUG_PCI_PCIE) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Advanced ^[[1m^[[KError ^[[m^[[KReporting support (PCIEAER) [Y/n/?] y
^[[31;01m*^[[0m PCI Express ^[[1m^[[Kerror ^[[m^[[Kinjection support (PCIEAER_INJECT) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Inter-FE based on IETF ForCES InterFE LFB
^[[31;01m*^[[0m *
^[[31;01m*^[[0m Inter-FE based on IETF ForCES InterFE LFB (NET_IFE) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Network light weight tunnels (LWTUNNEL) [N/y/?] (NEW)
^[[31;01m*^[[0m Network physical/parent device Netlink interface (NET_DEVLINK) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Generic ^[[1m^[[Kfail^[[m^[[Kover module (^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSCSI OnStream SC-x0 tape support (CHR_DEV_OSST) [N/m/y/?] n
^[[31;01m*^[[0mSCSI CDROM support (BLK_DEV_SR) [Y/n/m/?] y
^[[31;01m*^[[0m Enable vendor-specific extensions (for SCSI CDROM) (BLK_DEV_SR_VENDOR) [Y/n/?] y
^[[31;01m*^[[0mSCSI generic support (CHR_DEV_SG) [Y/n/m/?] y
^[[31;01m*^[[0mSCSI media changer support (CHR_DEV_SCH) [N/m/y/?] n
^[[31;01m*^[[0mVerbose SCSI ^[[1m^[[Kerror ^[[m^[[Kreporting (kernel size += 36K) (SCSI_CONSTANTS) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mOSD-Initiator library (SCSI_OSD_INITIATOR) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers (libata)
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (libata) (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Enable WiMAX (Networking options) to see the WiMAX drivers
^[[31;01m*^[[0m *
^[[31;01m*^[[0m VMware VMXNET3 ethernet driver (VMXNET3) [N/m/y/?] n
^[[31;01m*^[[0m FUJITSU Extended Socket Network Device driver (FUJITSU_ES) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Simulated networking device (NETDEVSIM) [N/m/y/?] (NEW)
^[[31;01m*^[[0m ^[[1m^[[KFail^[[m^[[Kover driver (NET_^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS online metadata check support (XFS_ONLINE_SCRUB) [N/y/?] (NEW)
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mEnable tracing for RCU (RCU_TRACE) [N/y/?] n
^[[31;01m*^[[0mProvide debugging asserts for adding NO_HZ support to an arch (RCU_EQS_DEBUG) [N/y/?] (NEW)
^[[31;01m*^[[0mForce round-robin CPU selection for unbound work items (DEBUG_WQ_FORCE_RR_CPU) [N/y/?] (NEW)
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mEnable CPU hotplug state control (CPU_HOTPLUG_STATE_CONTROL) [N/y/?] (NEW)
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m UPD include/generated/timeconst.h
^[[31;01m*^[[0m UPD include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m UPD include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m HOSTCC scripts/kallsyms
^[[31;01m*^[[0m CC scripts/mod/devicetable-offsets.s
^[[31;01m*^[[0m MKELF scripts/mod/elfconfig.h
^[[31;01m*^[[0m HOSTCC scripts/mod/modpost.o
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC [M] crypto/sha1_generic.o
^[[31;01m*^[[0m CC kernel/fork.o
^[[31;01m*^[[0m CC kernel/time/clocksource.o
^[[31;01m*^[[0m CC fs/ext4/file.o
^[[31;01m*^[[0m CC [M] crypto/sha256_generic.o
^[[31;01m*^[[0mkernel/fork.c:723:13: ^[[1m^[[Kwarning^[[m^[[K: 'task_struct_whitelist' defined but not used [-Wunused-function]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC [M] net/8021q/vlan.o
^[[31;01m*^[[0m CC [M] fs/lockd/xdr.o
^[[31;01m*^[[0m CC drivers/acpi/sleep.o
^[[31;01m*^[[0mduring RTL pass: mach
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c: In function 'LZ4_decompress_fast':
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c:358:1: internal compiler ^[[1m^[[Kerror:^[[m^[[K in sel_target_adjust_priority, at sel-sched.c:3334
^[[31;01m*^[[0m 358 | }
^[[31;01m*^[[0m | ^
^[[31;01m*^[[0mPlease submit a full bug report,
^[[31;01m*^[[0mwith preprocessed source if appropriate.
^[[31;01m*^[[0mSee <https://bugs.gentoo.org/> for instructions.
^[[31;01m*^[[0mmake[2]: *** [scripts/Makefile.build:304: lib/lz4/lz4_decompress.o] ^[[1m^[[KError ^[[m^[[K1
^[[31;01m*^[[0mmake[1]: *** [scripts/Makefile.build:544: lib/lz4] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0mmake: *** [Makefile:1052: lib] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./include/linux/wait.h:7,
^[[31;01m*^[[0m from ./include/linux/wait_bit.h:8,
^[[31;01m*^[[0m from ./include/linux/fs.h:6,
^[[31;01m*^[[0m from fs/ocfs2/file.c:27:
^[[31;01m*^[[0mfs/ocfs2/file.c: In function 'ocfs2_file_write_iter':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./arch/ia64/include/asm/intrinsics.h:11,
^[[31;01m*^[[0m from ./arch/ia64/include/asm/bitops.h:19,
^[[31;01m*^[[0m from ./include/linux/bitops.h:19,
^[[31;01m*^[[0m from drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:11:
^[[31;01m*^[[0mdrivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function 'ixgbevf_xdp_setup':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191212T031003Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191212T031003Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191212T031003Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191212T031003Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
12 Dec 2019 06:01:30 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
12 Dec 2019 06:01:30 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
12 Dec 2019 06:01:30 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
12 Dec 2019 06:01:30 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
4458.47user 210.01system 29:23.42elapsed 264%CPU (0avgtext+0avgdata 232176maxresident)k
0inputs+0outputs (1major+19625037minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191212T031003Z.TORuIr/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-12-11 6:31 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-12-11 6:31 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.5.3.3^[[0m
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191211T031004Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191211T031004Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191211T031004Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191211T031004Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Thermal Zone (ACPI_THERMAL) [Y/n/m/?] y
^[[31;01m*^[[0m NUMA support (ACPI_NUMA) [Y/?] y
^[[31;01m*^[[0m Debug Statements (ACPI_DEBUG) [N/y/?] n
^[[31;01m*^[[0m PCI slot detection driver (ACPI_PCI_SLOT) [N/y/?] n
^[[31;01m*^[[0m Container and Module Devices (ACPI_CONTAINER) [Y/?] y
^[[31;01m*^[[0m Hardware ^[[1m^[[KError ^[[m^[[KDevice (ACPI_HED) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Bus options (PCI, PCMCIA)
^[[31;01m*^[[0m
^[[31;01m*^[[0mPCI support (PCI) [Y/?] y
^[[31;01m*^[[0mPCI Express Port Bus support (PCIEPORTBUS) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Hotplug driver (HOTPLUG_PCI_PCIE) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Advanced ^[[1m^[[KError ^[[m^[[KReporting support (PCIEAER) [Y/n/?] y
^[[31;01m*^[[0m PCI Express ^[[1m^[[Kerror ^[[m^[[Kinjection support (PCIEAER_INJECT) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Inter-FE based on IETF ForCES InterFE LFB
^[[31;01m*^[[0m *
^[[31;01m*^[[0m Inter-FE based on IETF ForCES InterFE LFB (NET_IFE) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Network light weight tunnels (LWTUNNEL) [N/y/?] (NEW)
^[[31;01m*^[[0m Network physical/parent device Netlink interface (NET_DEVLINK) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Generic ^[[1m^[[Kfail^[[m^[[Kover module (^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSCSI OnStream SC-x0 tape support (CHR_DEV_OSST) [N/m/y/?] n
^[[31;01m*^[[0mSCSI CDROM support (BLK_DEV_SR) [Y/n/m/?] y
^[[31;01m*^[[0m Enable vendor-specific extensions (for SCSI CDROM) (BLK_DEV_SR_VENDOR) [Y/n/?] y
^[[31;01m*^[[0mSCSI generic support (CHR_DEV_SG) [Y/n/m/?] y
^[[31;01m*^[[0mSCSI media changer support (CHR_DEV_SCH) [N/m/y/?] n
^[[31;01m*^[[0mVerbose SCSI ^[[1m^[[Kerror ^[[m^[[Kreporting (kernel size += 36K) (SCSI_CONSTANTS) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mOSD-Initiator library (SCSI_OSD_INITIATOR) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers (libata)
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (libata) (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Enable WiMAX (Networking options) to see the WiMAX drivers
^[[31;01m*^[[0m *
^[[31;01m*^[[0m VMware VMXNET3 ethernet driver (VMXNET3) [N/m/y/?] n
^[[31;01m*^[[0m FUJITSU Extended Socket Network Device driver (FUJITSU_ES) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Simulated networking device (NETDEVSIM) [N/m/y/?] (NEW)
^[[31;01m*^[[0m ^[[1m^[[KFail^[[m^[[Kover driver (NET_^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS online metadata check support (XFS_ONLINE_SCRUB) [N/y/?] (NEW)
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mEnable tracing for RCU (RCU_TRACE) [N/y/?] n
^[[31;01m*^[[0mProvide debugging asserts for adding NO_HZ support to an arch (RCU_EQS_DEBUG) [N/y/?] (NEW)
^[[31;01m*^[[0mForce round-robin CPU selection for unbound work items (DEBUG_WQ_FORCE_RR_CPU) [N/y/?] (NEW)
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mEnable CPU hotplug state control (CPU_HOTPLUG_STATE_CONTROL) [N/y/?] (NEW)
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m UPD include/generated/timeconst.h
^[[31;01m*^[[0m UPD include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m UPD include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m HOSTCC scripts/genksyms/parse.tab.o
^[[31;01m*^[[0m HOSTCC scripts/genksyms/lex.lex.o
^[[31;01m*^[[0m HOSTCC scripts/conmakehash
^[[31;01m*^[[0m HOSTCC scripts/mod/sumversion.o
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC crypto/algapi.o
^[[31;01m*^[[0m CC fs/ext2/namei.o
^[[31;01m*^[[0m AR kernel/sched/built-in.a
^[[31;01m*^[[0m CC kernel/fork.o
^[[31;01m*^[[0m CC fs/ext2/super.o
^[[31;01m*^[[0mkernel/fork.c:723:13: ^[[1m^[[Kwarning^[[m^[[K: 'task_struct_whitelist' defined but not used [-Wunused-function]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC lib/lz4/lz4_decompress.o
^[[31;01m*^[[0m CC drivers/md/md-bitmap.o
^[[31;01m*^[[0m CC [M] fs/nfsd/stats.o
^[[31;01m*^[[0mduring RTL pass: mach
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c: In function 'LZ4_decompress_fast':
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c:358:1: internal compiler ^[[1m^[[Kerror:^[[m^[[K in sel_target_adjust_priority, at sel-sched.c:3334
^[[31;01m*^[[0m 358 | }
^[[31;01m*^[[0m | ^
^[[31;01m*^[[0mPlease submit a full bug report,
^[[31;01m*^[[0mwith preprocessed source if appropriate.
^[[31;01m*^[[0mSee <https://bugs.gentoo.org/> for instructions.
^[[31;01m*^[[0mmake[2]: *** [scripts/Makefile.build:304: lib/lz4/lz4_decompress.o] ^[[1m^[[KError ^[[m^[[K1
^[[31;01m*^[[0mmake[1]: *** [scripts/Makefile.build:544: lib/lz4] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0mmake: *** [Makefile:1052: lib] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./include/linux/wait.h:7,
^[[31;01m*^[[0m from ./include/linux/wait_bit.h:8,
^[[31;01m*^[[0m from ./include/linux/fs.h:6,
^[[31;01m*^[[0m from fs/ocfs2/file.c:27:
^[[31;01m*^[[0mfs/ocfs2/file.c: In function 'ocfs2_file_write_iter':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./arch/ia64/include/asm/intrinsics.h:11,
^[[31;01m*^[[0m from ./arch/ia64/include/asm/bitops.h:19,
^[[31;01m*^[[0m from ./include/linux/bitops.h:19,
^[[31;01m*^[[0m from drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:11:
^[[31;01m*^[[0mdrivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function 'ixgbevf_xdp_setup':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191211T031004Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191211T031004Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191211T031004Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191211T031004Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
11 Dec 2019 06:31:40 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
11 Dec 2019 06:31:40 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
11 Dec 2019 06:31:40 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
11 Dec 2019 06:31:40 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
4456.55user 217.47system 29:55.67elapsed 260%CPU (0avgtext+0avgdata 232176maxresident)k
0inputs+0outputs (0major+19615989minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191211T031004Z.CaFTaQ/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-12-10 6:49 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-12-10 6:49 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.5.3.3^[[0m
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191210T031004Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191210T031004Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191210T031004Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191210T031004Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Thermal Zone (ACPI_THERMAL) [Y/n/m/?] y
^[[31;01m*^[[0m NUMA support (ACPI_NUMA) [Y/?] y
^[[31;01m*^[[0m Debug Statements (ACPI_DEBUG) [N/y/?] n
^[[31;01m*^[[0m PCI slot detection driver (ACPI_PCI_SLOT) [N/y/?] n
^[[31;01m*^[[0m Container and Module Devices (ACPI_CONTAINER) [Y/?] y
^[[31;01m*^[[0m Hardware ^[[1m^[[KError ^[[m^[[KDevice (ACPI_HED) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Bus options (PCI, PCMCIA)
^[[31;01m*^[[0m
^[[31;01m*^[[0mPCI support (PCI) [Y/?] y
^[[31;01m*^[[0mPCI Express Port Bus support (PCIEPORTBUS) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Hotplug driver (HOTPLUG_PCI_PCIE) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Advanced ^[[1m^[[KError ^[[m^[[KReporting support (PCIEAER) [Y/n/?] y
^[[31;01m*^[[0m PCI Express ^[[1m^[[Kerror ^[[m^[[Kinjection support (PCIEAER_INJECT) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Inter-FE based on IETF ForCES InterFE LFB
^[[31;01m*^[[0m *
^[[31;01m*^[[0m Inter-FE based on IETF ForCES InterFE LFB (NET_IFE) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Network light weight tunnels (LWTUNNEL) [N/y/?] (NEW)
^[[31;01m*^[[0m Network physical/parent device Netlink interface (NET_DEVLINK) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Generic ^[[1m^[[Kfail^[[m^[[Kover module (^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSCSI OnStream SC-x0 tape support (CHR_DEV_OSST) [N/m/y/?] n
^[[31;01m*^[[0mSCSI CDROM support (BLK_DEV_SR) [Y/n/m/?] y
^[[31;01m*^[[0m Enable vendor-specific extensions (for SCSI CDROM) (BLK_DEV_SR_VENDOR) [Y/n/?] y
^[[31;01m*^[[0mSCSI generic support (CHR_DEV_SG) [Y/n/m/?] y
^[[31;01m*^[[0mSCSI media changer support (CHR_DEV_SCH) [N/m/y/?] n
^[[31;01m*^[[0mVerbose SCSI ^[[1m^[[Kerror ^[[m^[[Kreporting (kernel size += 36K) (SCSI_CONSTANTS) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mOSD-Initiator library (SCSI_OSD_INITIATOR) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers (libata)
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (libata) (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Enable WiMAX (Networking options) to see the WiMAX drivers
^[[31;01m*^[[0m *
^[[31;01m*^[[0m VMware VMXNET3 ethernet driver (VMXNET3) [N/m/y/?] n
^[[31;01m*^[[0m FUJITSU Extended Socket Network Device driver (FUJITSU_ES) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Simulated networking device (NETDEVSIM) [N/m/y/?] (NEW)
^[[31;01m*^[[0m ^[[1m^[[KFail^[[m^[[Kover driver (NET_^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS online metadata check support (XFS_ONLINE_SCRUB) [N/y/?] (NEW)
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mEnable tracing for RCU (RCU_TRACE) [N/y/?] n
^[[31;01m*^[[0mProvide debugging asserts for adding NO_HZ support to an arch (RCU_EQS_DEBUG) [N/y/?] (NEW)
^[[31;01m*^[[0mForce round-robin CPU selection for unbound work items (DEBUG_WQ_FORCE_RR_CPU) [N/y/?] (NEW)
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mEnable CPU hotplug state control (CPU_HOTPLUG_STATE_CONTROL) [N/y/?] (NEW)
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m UPD include/generated/timeconst.h
^[[31;01m*^[[0m UPD include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m UPD include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m YACC scripts/genksyms/parse.tab.c
^[[31;01m*^[[0m HOSTCC scripts/mod/mk_elfconfig
^[[31;01m*^[[0m HOSTCC scripts/kallsyms
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m CC scripts/mod/devicetable-offsets.s
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/sched/swait.o
^[[31;01m*^[[0m AR kernel/time/built-in.a
^[[31;01m*^[[0m CC kernel/fork.o
^[[31;01m*^[[0m CC mm/rmap.o
^[[31;01m*^[[0m CC fs/debugfs/file.o
^[[31;01m*^[[0mkernel/fork.c:723:13: ^[[1m^[[Kwarning^[[m^[[K: 'task_struct_whitelist' defined but not used [-Wunused-function]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC lib/lz4/lz4_decompress.o
^[[31;01m*^[[0m CC drivers/acpi/reboot.o
^[[31;01m*^[[0m CC net/core/net_namespace.o
^[[31;01m*^[[0mduring RTL pass: mach
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c: In function 'LZ4_decompress_fast':
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c:358:1: internal compiler ^[[1m^[[Kerror:^[[m^[[K in sel_target_adjust_priority, at sel-sched.c:3334
^[[31;01m*^[[0m 358 | }
^[[31;01m*^[[0m | ^
^[[31;01m*^[[0mPlease submit a full bug report,
^[[31;01m*^[[0mwith preprocessed source if appropriate.
^[[31;01m*^[[0mSee <https://bugs.gentoo.org/> for instructions.
^[[31;01m*^[[0mmake[2]: *** [scripts/Makefile.build:304: lib/lz4/lz4_decompress.o] ^[[1m^[[KError ^[[m^[[K1
^[[31;01m*^[[0mmake[1]: *** [scripts/Makefile.build:544: lib/lz4] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0mmake: *** [Makefile:1052: lib] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./include/linux/wait.h:7,
^[[31;01m*^[[0m from ./include/linux/wait_bit.h:8,
^[[31;01m*^[[0m from ./include/linux/fs.h:6,
^[[31;01m*^[[0m from fs/ocfs2/file.c:27:
^[[31;01m*^[[0mfs/ocfs2/file.c: In function 'ocfs2_file_write_iter':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./arch/ia64/include/asm/intrinsics.h:11,
^[[31;01m*^[[0m from ./arch/ia64/include/asm/bitops.h:19,
^[[31;01m*^[[0m from ./include/linux/bitops.h:19,
^[[31;01m*^[[0m from drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:11:
^[[31;01m*^[[0mdrivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function 'ixgbevf_xdp_setup':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191210T031004Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191210T031004Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191210T031004Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191210T031004Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
10 Dec 2019 06:49:43 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
10 Dec 2019 06:49:43 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
10 Dec 2019 06:49:43 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
10 Dec 2019 06:49:43 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
4457.40user 223.45system 30:01.84elapsed 259%CPU (0avgtext+0avgdata 232048maxresident)k
0inputs+0outputs (0major+19652705minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191210T031004Z.iDDjUh/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-12-09 6:01 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-12-09 6:01 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.5.3.3^[[0m
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191209T030705Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191209T030705Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191209T030705Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191209T030705Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Thermal Zone (ACPI_THERMAL) [Y/n/m/?] y
^[[31;01m*^[[0m NUMA support (ACPI_NUMA) [Y/?] y
^[[31;01m*^[[0m Debug Statements (ACPI_DEBUG) [N/y/?] n
^[[31;01m*^[[0m PCI slot detection driver (ACPI_PCI_SLOT) [N/y/?] n
^[[31;01m*^[[0m Container and Module Devices (ACPI_CONTAINER) [Y/?] y
^[[31;01m*^[[0m Hardware ^[[1m^[[KError ^[[m^[[KDevice (ACPI_HED) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Bus options (PCI, PCMCIA)
^[[31;01m*^[[0m
^[[31;01m*^[[0mPCI support (PCI) [Y/?] y
^[[31;01m*^[[0mPCI Express Port Bus support (PCIEPORTBUS) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Hotplug driver (HOTPLUG_PCI_PCIE) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Advanced ^[[1m^[[KError ^[[m^[[KReporting support (PCIEAER) [Y/n/?] y
^[[31;01m*^[[0m PCI Express ^[[1m^[[Kerror ^[[m^[[Kinjection support (PCIEAER_INJECT) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Inter-FE based on IETF ForCES InterFE LFB
^[[31;01m*^[[0m *
^[[31;01m*^[[0m Inter-FE based on IETF ForCES InterFE LFB (NET_IFE) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Network light weight tunnels (LWTUNNEL) [N/y/?] (NEW)
^[[31;01m*^[[0m Network physical/parent device Netlink interface (NET_DEVLINK) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Generic ^[[1m^[[Kfail^[[m^[[Kover module (^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSCSI OnStream SC-x0 tape support (CHR_DEV_OSST) [N/m/y/?] n
^[[31;01m*^[[0mSCSI CDROM support (BLK_DEV_SR) [Y/n/m/?] y
^[[31;01m*^[[0m Enable vendor-specific extensions (for SCSI CDROM) (BLK_DEV_SR_VENDOR) [Y/n/?] y
^[[31;01m*^[[0mSCSI generic support (CHR_DEV_SG) [Y/n/m/?] y
^[[31;01m*^[[0mSCSI media changer support (CHR_DEV_SCH) [N/m/y/?] n
^[[31;01m*^[[0mVerbose SCSI ^[[1m^[[Kerror ^[[m^[[Kreporting (kernel size += 36K) (SCSI_CONSTANTS) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mOSD-Initiator library (SCSI_OSD_INITIATOR) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers (libata)
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (libata) (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Enable WiMAX (Networking options) to see the WiMAX drivers
^[[31;01m*^[[0m *
^[[31;01m*^[[0m VMware VMXNET3 ethernet driver (VMXNET3) [N/m/y/?] n
^[[31;01m*^[[0m FUJITSU Extended Socket Network Device driver (FUJITSU_ES) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Simulated networking device (NETDEVSIM) [N/m/y/?] (NEW)
^[[31;01m*^[[0m ^[[1m^[[KFail^[[m^[[Kover driver (NET_^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS online metadata check support (XFS_ONLINE_SCRUB) [N/y/?] (NEW)
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mEnable tracing for RCU (RCU_TRACE) [N/y/?] n
^[[31;01m*^[[0mProvide debugging asserts for adding NO_HZ support to an arch (RCU_EQS_DEBUG) [N/y/?] (NEW)
^[[31;01m*^[[0mForce round-robin CPU selection for unbound work items (DEBUG_WQ_FORCE_RR_CPU) [N/y/?] (NEW)
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mEnable CPU hotplug state control (CPU_HOTPLUG_STATE_CONTROL) [N/y/?] (NEW)
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m UPD include/generated/timeconst.h
^[[31;01m*^[[0m UPD include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m UPD include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m LEX scripts/genksyms/lex.lex.c
^[[31;01m*^[[0m HOSTCC scripts/conmakehash
^[[31;01m*^[[0m YACC scripts/genksyms/parse.tab.h
^[[31;01m*^[[0m HOSTCC scripts/genksyms/parse.tab.o
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m AR kernel/time/built-in.a
^[[31;01m*^[[0m CC kernel/fork.o
^[[31;01m*^[[0m CC fs/ext4/ialloc.o
^[[31;01m*^[[0m CC mm/quicklist.o
^[[31;01m*^[[0m CC mm/memfd.o
^[[31;01m*^[[0mkernel/fork.c:723:13: ^[[1m^[[Kwarning^[[m^[[K: 'task_struct_whitelist' defined but not used [-Wunused-function]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC [M] fs/lockd/host.o
^[[31;01m*^[[0m CC net/core/stream.o
^[[31;01m*^[[0m CC drivers/acpi/acpica/psxface.o
^[[31;01m*^[[0mduring RTL pass: mach
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c: In function 'LZ4_decompress_fast':
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c:358:1: internal compiler ^[[1m^[[Kerror:^[[m^[[K in sel_target_adjust_priority, at sel-sched.c:3334
^[[31;01m*^[[0m 358 | }
^[[31;01m*^[[0m | ^
^[[31;01m*^[[0mPlease submit a full bug report,
^[[31;01m*^[[0mwith preprocessed source if appropriate.
^[[31;01m*^[[0mSee <https://bugs.gentoo.org/> for instructions.
^[[31;01m*^[[0mmake[2]: *** [scripts/Makefile.build:304: lib/lz4/lz4_decompress.o] ^[[1m^[[KError ^[[m^[[K1
^[[31;01m*^[[0mmake[1]: *** [scripts/Makefile.build:544: lib/lz4] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0mmake: *** [Makefile:1052: lib] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./include/linux/wait.h:7,
^[[31;01m*^[[0m from ./include/linux/wait_bit.h:8,
^[[31;01m*^[[0m from ./include/linux/fs.h:6,
^[[31;01m*^[[0m from fs/ocfs2/file.c:27:
^[[31;01m*^[[0mfs/ocfs2/file.c: In function 'ocfs2_file_write_iter':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./arch/ia64/include/asm/intrinsics.h:11,
^[[31;01m*^[[0m from ./arch/ia64/include/asm/bitops.h:19,
^[[31;01m*^[[0m from ./include/linux/bitops.h:19,
^[[31;01m*^[[0m from drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:11:
^[[31;01m*^[[0mdrivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function 'ixgbevf_xdp_setup':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191209T030705Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191209T030705Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191209T030705Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191209T030705Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
09 Dec 2019 06:01:13 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
09 Dec 2019 06:01:13 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
09 Dec 2019 06:01:13 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
09 Dec 2019 06:01:13 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
4458.41user 214.38system 30:32.35elapsed 255%CPU (0avgtext+0avgdata 232048maxresident)k
0inputs+0outputs (2major+19656844minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191209T030705Z.V1kVhm/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-12-07 6:01 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-12-07 6:01 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.5.3.3^[[0m
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191207T031010Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191207T031010Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191207T031010Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191207T031010Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Thermal Zone (ACPI_THERMAL) [Y/n/m/?] y
^[[31;01m*^[[0m NUMA support (ACPI_NUMA) [Y/?] y
^[[31;01m*^[[0m Debug Statements (ACPI_DEBUG) [N/y/?] n
^[[31;01m*^[[0m PCI slot detection driver (ACPI_PCI_SLOT) [N/y/?] n
^[[31;01m*^[[0m Container and Module Devices (ACPI_CONTAINER) [Y/?] y
^[[31;01m*^[[0m Hardware ^[[1m^[[KError ^[[m^[[KDevice (ACPI_HED) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Bus options (PCI, PCMCIA)
^[[31;01m*^[[0m
^[[31;01m*^[[0mPCI support (PCI) [Y/?] y
^[[31;01m*^[[0mPCI Express Port Bus support (PCIEPORTBUS) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Hotplug driver (HOTPLUG_PCI_PCIE) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Advanced ^[[1m^[[KError ^[[m^[[KReporting support (PCIEAER) [Y/n/?] y
^[[31;01m*^[[0m PCI Express ^[[1m^[[Kerror ^[[m^[[Kinjection support (PCIEAER_INJECT) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Inter-FE based on IETF ForCES InterFE LFB
^[[31;01m*^[[0m *
^[[31;01m*^[[0m Inter-FE based on IETF ForCES InterFE LFB (NET_IFE) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Network light weight tunnels (LWTUNNEL) [N/y/?] (NEW)
^[[31;01m*^[[0m Network physical/parent device Netlink interface (NET_DEVLINK) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Generic ^[[1m^[[Kfail^[[m^[[Kover module (^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSCSI OnStream SC-x0 tape support (CHR_DEV_OSST) [N/m/y/?] n
^[[31;01m*^[[0mSCSI CDROM support (BLK_DEV_SR) [Y/n/m/?] y
^[[31;01m*^[[0m Enable vendor-specific extensions (for SCSI CDROM) (BLK_DEV_SR_VENDOR) [Y/n/?] y
^[[31;01m*^[[0mSCSI generic support (CHR_DEV_SG) [Y/n/m/?] y
^[[31;01m*^[[0mSCSI media changer support (CHR_DEV_SCH) [N/m/y/?] n
^[[31;01m*^[[0mVerbose SCSI ^[[1m^[[Kerror ^[[m^[[Kreporting (kernel size += 36K) (SCSI_CONSTANTS) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mOSD-Initiator library (SCSI_OSD_INITIATOR) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers (libata)
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (libata) (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Enable WiMAX (Networking options) to see the WiMAX drivers
^[[31;01m*^[[0m *
^[[31;01m*^[[0m VMware VMXNET3 ethernet driver (VMXNET3) [N/m/y/?] n
^[[31;01m*^[[0m FUJITSU Extended Socket Network Device driver (FUJITSU_ES) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Simulated networking device (NETDEVSIM) [N/m/y/?] (NEW)
^[[31;01m*^[[0m ^[[1m^[[KFail^[[m^[[Kover driver (NET_^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS online metadata check support (XFS_ONLINE_SCRUB) [N/y/?] (NEW)
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mEnable tracing for RCU (RCU_TRACE) [N/y/?] n
^[[31;01m*^[[0mProvide debugging asserts for adding NO_HZ support to an arch (RCU_EQS_DEBUG) [N/y/?] (NEW)
^[[31;01m*^[[0mForce round-robin CPU selection for unbound work items (DEBUG_WQ_FORCE_RR_CPU) [N/y/?] (NEW)
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mEnable CPU hotplug state control (CPU_HOTPLUG_STATE_CONTROL) [N/y/?] (NEW)
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m UPD include/generated/timeconst.h
^[[31;01m*^[[0m UPD include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m UPD include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC scripts/mod/devicetable-offsets.s
^[[31;01m*^[[0m UPD scripts/mod/devicetable-offsets.h
^[[31;01m*^[[0m HOSTCC scripts/bin2c
^[[31;01m*^[[0m YACC scripts/genksyms/parse.tab.c
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC [M] fs/cifs/file.o
^[[31;01m*^[[0m AR kernel/time/built-in.a
^[[31;01m*^[[0m CC kernel/fork.o
^[[31;01m*^[[0m CC kernel/sched/topology.o
^[[31;01m*^[[0m CC mm/msync.o
^[[31;01m*^[[0mkernel/fork.c:723:13: ^[[1m^[[Kwarning^[[m^[[K: 'task_struct_whitelist' defined but not used [-Wunused-function]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./include/linux/wait.h:7,
^[[31;01m*^[[0m from ./include/linux/wait_bit.h:8,
^[[31;01m*^[[0m from ./include/linux/fs.h:6,
^[[31;01m*^[[0m from fs/ocfs2/file.c:27:
^[[31;01m*^[[0mfs/ocfs2/file.c: In function 'ocfs2_file_write_iter':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m AR drivers/i2c/built-in.a
^[[31;01m*^[[0m AR drivers/idle/built-in.a
^[[31;01m*^[[0m CC drivers/input/keyboard/atkbd.o
^[[31;01m*^[[0mduring RTL pass: mach
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c: In function 'LZ4_decompress_fast':
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c:358:1: internal compiler ^[[1m^[[Kerror:^[[m^[[K in sel_target_adjust_priority, at sel-sched.c:3334
^[[31;01m*^[[0m 358 | }
^[[31;01m*^[[0m | ^
^[[31;01m*^[[0mPlease submit a full bug report,
^[[31;01m*^[[0mwith preprocessed source if appropriate.
^[[31;01m*^[[0mSee <https://bugs.gentoo.org/> for instructions.
^[[31;01m*^[[0mmake[2]: *** [scripts/Makefile.build:304: lib/lz4/lz4_decompress.o] ^[[1m^[[KError ^[[m^[[K1
^[[31;01m*^[[0mmake[1]: *** [scripts/Makefile.build:544: lib/lz4] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0mmake: *** [Makefile:1052: lib] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./arch/ia64/include/asm/intrinsics.h:11,
^[[31;01m*^[[0m from ./arch/ia64/include/asm/bitops.h:19,
^[[31;01m*^[[0m from ./include/linux/bitops.h:19,
^[[31;01m*^[[0m from drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:11:
^[[31;01m*^[[0mdrivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function 'ixgbevf_xdp_setup':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191207T031010Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191207T031010Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191207T031010Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191207T031010Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
07 Dec 2019 06:01:03 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
07 Dec 2019 06:01:03 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
07 Dec 2019 06:01:03 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
07 Dec 2019 06:01:03 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
4457.48user 208.07system 29:36.32elapsed 262%CPU (0avgtext+0avgdata 232048maxresident)k
0inputs+0outputs (0major+19653256minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191207T031010Z.PWNdSi/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-12-06 6:11 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-12-06 6:11 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.5.3.3^[[0m
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191206T031004Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191206T031004Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191206T031004Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191206T031004Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Thermal Zone (ACPI_THERMAL) [Y/n/m/?] y
^[[31;01m*^[[0m NUMA support (ACPI_NUMA) [Y/?] y
^[[31;01m*^[[0m Debug Statements (ACPI_DEBUG) [N/y/?] n
^[[31;01m*^[[0m PCI slot detection driver (ACPI_PCI_SLOT) [N/y/?] n
^[[31;01m*^[[0m Container and Module Devices (ACPI_CONTAINER) [Y/?] y
^[[31;01m*^[[0m Hardware ^[[1m^[[KError ^[[m^[[KDevice (ACPI_HED) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Bus options (PCI, PCMCIA)
^[[31;01m*^[[0m
^[[31;01m*^[[0mPCI support (PCI) [Y/?] y
^[[31;01m*^[[0mPCI Express Port Bus support (PCIEPORTBUS) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Hotplug driver (HOTPLUG_PCI_PCIE) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Advanced ^[[1m^[[KError ^[[m^[[KReporting support (PCIEAER) [Y/n/?] y
^[[31;01m*^[[0m PCI Express ^[[1m^[[Kerror ^[[m^[[Kinjection support (PCIEAER_INJECT) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Inter-FE based on IETF ForCES InterFE LFB
^[[31;01m*^[[0m *
^[[31;01m*^[[0m Inter-FE based on IETF ForCES InterFE LFB (NET_IFE) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Network light weight tunnels (LWTUNNEL) [N/y/?] (NEW)
^[[31;01m*^[[0m Network physical/parent device Netlink interface (NET_DEVLINK) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Generic ^[[1m^[[Kfail^[[m^[[Kover module (^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSCSI OnStream SC-x0 tape support (CHR_DEV_OSST) [N/m/y/?] n
^[[31;01m*^[[0mSCSI CDROM support (BLK_DEV_SR) [Y/n/m/?] y
^[[31;01m*^[[0m Enable vendor-specific extensions (for SCSI CDROM) (BLK_DEV_SR_VENDOR) [Y/n/?] y
^[[31;01m*^[[0mSCSI generic support (CHR_DEV_SG) [Y/n/m/?] y
^[[31;01m*^[[0mSCSI media changer support (CHR_DEV_SCH) [N/m/y/?] n
^[[31;01m*^[[0mVerbose SCSI ^[[1m^[[Kerror ^[[m^[[Kreporting (kernel size += 36K) (SCSI_CONSTANTS) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mOSD-Initiator library (SCSI_OSD_INITIATOR) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers (libata)
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (libata) (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Enable WiMAX (Networking options) to see the WiMAX drivers
^[[31;01m*^[[0m *
^[[31;01m*^[[0m VMware VMXNET3 ethernet driver (VMXNET3) [N/m/y/?] n
^[[31;01m*^[[0m FUJITSU Extended Socket Network Device driver (FUJITSU_ES) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Simulated networking device (NETDEVSIM) [N/m/y/?] (NEW)
^[[31;01m*^[[0m ^[[1m^[[KFail^[[m^[[Kover driver (NET_^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS online metadata check support (XFS_ONLINE_SCRUB) [N/y/?] (NEW)
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mEnable tracing for RCU (RCU_TRACE) [N/y/?] n
^[[31;01m*^[[0mProvide debugging asserts for adding NO_HZ support to an arch (RCU_EQS_DEBUG) [N/y/?] (NEW)
^[[31;01m*^[[0mForce round-robin CPU selection for unbound work items (DEBUG_WQ_FORCE_RR_CPU) [N/y/?] (NEW)
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mEnable CPU hotplug state control (CPU_HOTPLUG_STATE_CONTROL) [N/y/?] (NEW)
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m UPD include/generated/timeconst.h
^[[31;01m*^[[0m UPD include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m UPD include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m HOSTCC scripts/genksyms/parse.tab.o
^[[31;01m*^[[0m HOSTCC scripts/mod/file2alias.o
^[[31;01m*^[[0m HOSTCC scripts/mod/sumversion.o
^[[31;01m*^[[0m HOSTCC scripts/genksyms/lex.lex.o
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC fs/ext2/inode.o
^[[31;01m*^[[0m CC mm/mempolicy.o
^[[31;01m*^[[0m AR kernel/time/built-in.a
^[[31;01m*^[[0m CC kernel/fork.o
^[[31;01m*^[[0m CC [M] crypto/pcbc.o
^[[31;01m*^[[0mkernel/fork.c:723:13: ^[[1m^[[Kwarning^[[m^[[K: 'task_struct_whitelist' defined but not used [-Wunused-function]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC net/core/ethtool.o
^[[31;01m*^[[0m CC drivers/char/snsc.o
^[[31;01m*^[[0m CC [M] fs/nfs/read.o
^[[31;01m*^[[0mduring RTL pass: mach
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c: In function 'LZ4_decompress_fast':
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c:358:1: internal compiler ^[[1m^[[Kerror:^[[m^[[K in sel_target_adjust_priority, at sel-sched.c:3334
^[[31;01m*^[[0m 358 | }
^[[31;01m*^[[0m | ^
^[[31;01m*^[[0mPlease submit a full bug report,
^[[31;01m*^[[0mwith preprocessed source if appropriate.
^[[31;01m*^[[0mSee <https://bugs.gentoo.org/> for instructions.
^[[31;01m*^[[0mmake[2]: *** [scripts/Makefile.build:304: lib/lz4/lz4_decompress.o] ^[[1m^[[KError ^[[m^[[K1
^[[31;01m*^[[0mmake[1]: *** [scripts/Makefile.build:544: lib/lz4] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0mmake: *** [Makefile:1052: lib] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./include/linux/wait.h:7,
^[[31;01m*^[[0m from ./include/linux/wait_bit.h:8,
^[[31;01m*^[[0m from ./include/linux/fs.h:6,
^[[31;01m*^[[0m from fs/ocfs2/file.c:27:
^[[31;01m*^[[0mfs/ocfs2/file.c: In function 'ocfs2_file_write_iter':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./arch/ia64/include/asm/intrinsics.h:11,
^[[31;01m*^[[0m from ./arch/ia64/include/asm/bitops.h:19,
^[[31;01m*^[[0m from ./include/linux/bitops.h:19,
^[[31;01m*^[[0m from drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:11:
^[[31;01m*^[[0mdrivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function 'ixgbevf_xdp_setup':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191206T031004Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191206T031004Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191206T031004Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191206T031004Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
06 Dec 2019 06:11:16 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
06 Dec 2019 06:11:16 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
06 Dec 2019 06:11:16 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
06 Dec 2019 06:11:16 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
4440.89user 180.16system 28:41.24elapsed 268%CPU (0avgtext+0avgdata 232048maxresident)k
0inputs+0outputs (305major+19654821minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191206T031004Z.W5BjCP/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-12-05 6:59 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-12-05 6:59 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.5.3.3^[[0m
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191205T031005Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191205T031005Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191205T031005Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191205T031005Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m4.19.86-gentoo^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 4.19.86-gentoo ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Thermal Zone (ACPI_THERMAL) [Y/n/m/?] y
^[[31;01m*^[[0m NUMA support (ACPI_NUMA) [Y/?] y
^[[31;01m*^[[0m Debug Statements (ACPI_DEBUG) [N/y/?] n
^[[31;01m*^[[0m PCI slot detection driver (ACPI_PCI_SLOT) [N/y/?] n
^[[31;01m*^[[0m Container and Module Devices (ACPI_CONTAINER) [Y/?] y
^[[31;01m*^[[0m Hardware ^[[1m^[[KError ^[[m^[[KDevice (ACPI_HED) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Bus options (PCI, PCMCIA)
^[[31;01m*^[[0m
^[[31;01m*^[[0mPCI support (PCI) [Y/?] y
^[[31;01m*^[[0mPCI Express Port Bus support (PCIEPORTBUS) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Hotplug driver (HOTPLUG_PCI_PCIE) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Advanced ^[[1m^[[KError ^[[m^[[KReporting support (PCIEAER) [Y/n/?] y
^[[31;01m*^[[0m PCI Express ^[[1m^[[Kerror ^[[m^[[Kinjection support (PCIEAER_INJECT) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Inter-FE based on IETF ForCES InterFE LFB
^[[31;01m*^[[0m *
^[[31;01m*^[[0m Inter-FE based on IETF ForCES InterFE LFB (NET_IFE) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Network light weight tunnels (LWTUNNEL) [N/y/?] (NEW)
^[[31;01m*^[[0m Network physical/parent device Netlink interface (NET_DEVLINK) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Generic ^[[1m^[[Kfail^[[m^[[Kover module (^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSCSI OnStream SC-x0 tape support (CHR_DEV_OSST) [N/m/y/?] n
^[[31;01m*^[[0mSCSI CDROM support (BLK_DEV_SR) [Y/n/m/?] y
^[[31;01m*^[[0m Enable vendor-specific extensions (for SCSI CDROM) (BLK_DEV_SR_VENDOR) [Y/n/?] y
^[[31;01m*^[[0mSCSI generic support (CHR_DEV_SG) [Y/n/m/?] y
^[[31;01m*^[[0mSCSI media changer support (CHR_DEV_SCH) [N/m/y/?] n
^[[31;01m*^[[0mVerbose SCSI ^[[1m^[[Kerror ^[[m^[[Kreporting (kernel size += 36K) (SCSI_CONSTANTS) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mOSD-Initiator library (SCSI_OSD_INITIATOR) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers (libata)
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (libata) (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Enable WiMAX (Networking options) to see the WiMAX drivers
^[[31;01m*^[[0m *
^[[31;01m*^[[0m VMware VMXNET3 ethernet driver (VMXNET3) [N/m/y/?] n
^[[31;01m*^[[0m FUJITSU Extended Socket Network Device driver (FUJITSU_ES) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Simulated networking device (NETDEVSIM) [N/m/y/?] (NEW)
^[[31;01m*^[[0m ^[[1m^[[KFail^[[m^[[Kover driver (NET_^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS online metadata check support (XFS_ONLINE_SCRUB) [N/y/?] (NEW)
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mEnable tracing for RCU (RCU_TRACE) [N/y/?] n
^[[31;01m*^[[0mProvide debugging asserts for adding NO_HZ support to an arch (RCU_EQS_DEBUG) [N/y/?] (NEW)
^[[31;01m*^[[0mForce round-robin CPU selection for unbound work items (DEBUG_WQ_FORCE_RR_CPU) [N/y/?] (NEW)
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mEnable CPU hotplug state control (CPU_HOTPLUG_STATE_CONTROL) [N/y/?] (NEW)
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m UPD include/generated/timeconst.h
^[[31;01m*^[[0m UPD include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m UPD include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m HOSTCC scripts/conmakehash
^[[31;01m*^[[0m UPD scripts/mod/devicetable-offsets.h
^[[31;01m*^[[0m HOSTCC scripts/genksyms/lex.lex.o
^[[31;01m*^[[0m HOSTCC scripts/mod/sumversion.o
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC [M] crypto/authencesn.o
^[[31;01m*^[[0m AR kernel/time/built-in.a
^[[31;01m*^[[0m CC kernel/fork.o
^[[31;01m*^[[0m CC fs/ext4/ialloc.o
^[[31;01m*^[[0m CC block/blk-sysfs.o
^[[31;01m*^[[0mkernel/fork.c:723:13: ^[[1m^[[Kwarning^[[m^[[K: 'task_struct_whitelist' defined but not used [-Wunused-function]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./include/linux/wait.h:7,
^[[31;01m*^[[0m from ./include/linux/wait_bit.h:8,
^[[31;01m*^[[0m from ./include/linux/fs.h:6,
^[[31;01m*^[[0m from fs/ocfs2/file.c:27:
^[[31;01m*^[[0mfs/ocfs2/file.c: In function 'ocfs2_file_write_iter':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC [M] fs/ocfs2/namei.o
^[[31;01m*^[[0m CC net/core/ethtool.o
^[[31;01m*^[[0m CC drivers/input/mouse/focaltech.o
^[[31;01m*^[[0mduring RTL pass: mach
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c: In function 'LZ4_decompress_fast':
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c:358:1: internal compiler ^[[1m^[[Kerror:^[[m^[[K in sel_target_adjust_priority, at sel-sched.c:3334
^[[31;01m*^[[0m 358 | }
^[[31;01m*^[[0m | ^
^[[31;01m*^[[0mPlease submit a full bug report,
^[[31;01m*^[[0mwith preprocessed source if appropriate.
^[[31;01m*^[[0mSee <https://bugs.gentoo.org/> for instructions.
^[[31;01m*^[[0mmake[2]: *** [scripts/Makefile.build:304: lib/lz4/lz4_decompress.o] ^[[1m^[[KError ^[[m^[[K1
^[[31;01m*^[[0mmake[1]: *** [scripts/Makefile.build:544: lib/lz4] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0mmake: *** [Makefile:1052: lib] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./arch/ia64/include/asm/intrinsics.h:11,
^[[31;01m*^[[0m from ./arch/ia64/include/asm/bitops.h:19,
^[[31;01m*^[[0m from ./include/linux/bitops.h:19,
^[[31;01m*^[[0m from drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:11:
^[[31;01m*^[[0mdrivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function 'ixgbevf_xdp_setup':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191205T031005Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191205T031005Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191205T031005Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191205T031005Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
05 Dec 2019 06:59:52 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
05 Dec 2019 06:59:52 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
05 Dec 2019 06:59:52 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
05 Dec 2019 06:59:52 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
4440.49user 177.23system 29:22.79elapsed 261%CPU (0avgtext+0avgdata 232048maxresident)k
0inputs+0outputs (0major+19657992minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191205T031005Z.FCQ7GH/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-12-04 6:38 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-12-04 6:38 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.5.3.3^[[0m
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191204T031007Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191204T031007Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191204T031007Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191204T031007Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m4.19.82-gentoo^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 4.19.82-gentoo ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Thermal Zone (ACPI_THERMAL) [Y/n/m/?] y
^[[31;01m*^[[0m NUMA support (ACPI_NUMA) [Y/?] y
^[[31;01m*^[[0m Debug Statements (ACPI_DEBUG) [N/y/?] n
^[[31;01m*^[[0m PCI slot detection driver (ACPI_PCI_SLOT) [N/y/?] n
^[[31;01m*^[[0m Container and Module Devices (ACPI_CONTAINER) [Y/?] y
^[[31;01m*^[[0m Hardware ^[[1m^[[KError ^[[m^[[KDevice (ACPI_HED) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Bus options (PCI, PCMCIA)
^[[31;01m*^[[0m
^[[31;01m*^[[0mPCI support (PCI) [Y/?] y
^[[31;01m*^[[0mPCI Express Port Bus support (PCIEPORTBUS) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Hotplug driver (HOTPLUG_PCI_PCIE) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Advanced ^[[1m^[[KError ^[[m^[[KReporting support (PCIEAER) [Y/n/?] y
^[[31;01m*^[[0m PCI Express ^[[1m^[[Kerror ^[[m^[[Kinjection support (PCIEAER_INJECT) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Inter-FE based on IETF ForCES InterFE LFB
^[[31;01m*^[[0m *
^[[31;01m*^[[0m Inter-FE based on IETF ForCES InterFE LFB (NET_IFE) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Network light weight tunnels (LWTUNNEL) [N/y/?] (NEW)
^[[31;01m*^[[0m Network physical/parent device Netlink interface (NET_DEVLINK) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Generic ^[[1m^[[Kfail^[[m^[[Kover module (^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSCSI OnStream SC-x0 tape support (CHR_DEV_OSST) [N/m/y/?] n
^[[31;01m*^[[0mSCSI CDROM support (BLK_DEV_SR) [Y/n/m/?] y
^[[31;01m*^[[0m Enable vendor-specific extensions (for SCSI CDROM) (BLK_DEV_SR_VENDOR) [Y/n/?] y
^[[31;01m*^[[0mSCSI generic support (CHR_DEV_SG) [Y/n/m/?] y
^[[31;01m*^[[0mSCSI media changer support (CHR_DEV_SCH) [N/m/y/?] n
^[[31;01m*^[[0mVerbose SCSI ^[[1m^[[Kerror ^[[m^[[Kreporting (kernel size += 36K) (SCSI_CONSTANTS) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mOSD-Initiator library (SCSI_OSD_INITIATOR) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers (libata)
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (libata) (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Enable WiMAX (Networking options) to see the WiMAX drivers
^[[31;01m*^[[0m *
^[[31;01m*^[[0m VMware VMXNET3 ethernet driver (VMXNET3) [N/m/y/?] n
^[[31;01m*^[[0m FUJITSU Extended Socket Network Device driver (FUJITSU_ES) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Simulated networking device (NETDEVSIM) [N/m/y/?] (NEW)
^[[31;01m*^[[0m ^[[1m^[[KFail^[[m^[[Kover driver (NET_^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS online metadata check support (XFS_ONLINE_SCRUB) [N/y/?] (NEW)
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mEnable tracing for RCU (RCU_TRACE) [N/y/?] n
^[[31;01m*^[[0mProvide debugging asserts for adding NO_HZ support to an arch (RCU_EQS_DEBUG) [N/y/?] (NEW)
^[[31;01m*^[[0mForce round-robin CPU selection for unbound work items (DEBUG_WQ_FORCE_RR_CPU) [N/y/?] (NEW)
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mEnable CPU hotplug state control (CPU_HOTPLUG_STATE_CONTROL) [N/y/?] (NEW)
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m UPD include/generated/timeconst.h
^[[31;01m*^[[0m UPD include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m UPD include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m UPD scripts/mod/devicetable-offsets.h
^[[31;01m*^[[0m HOSTCC scripts/mod/sumversion.o
^[[31;01m*^[[0m HOSTCC scripts/conmakehash
^[[31;01m*^[[0m HOSTCC scripts/mod/file2alias.o
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC mm/mincore.o
^[[31;01m*^[[0m CC [M] fs/cifs/ioctl.o
^[[31;01m*^[[0m AR kernel/sched/built-in.a
^[[31;01m*^[[0m CC kernel/fork.o
^[[31;01m*^[[0m CC mm/mlock.o
^[[31;01m*^[[0mkernel/fork.c:723:13: ^[[1m^[[Kwarning^[[m^[[K: 'task_struct_whitelist' defined but not used [-Wunused-function]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./include/linux/wait.h:7,
^[[31;01m*^[[0m from ./include/linux/wait_bit.h:8,
^[[31;01m*^[[0m from ./include/linux/fs.h:6,
^[[31;01m*^[[0m from fs/ocfs2/file.c:27:
^[[31;01m*^[[0mfs/ocfs2/file.c: In function 'ocfs2_file_write_iter':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC drivers/md/dm-ioctl.o
^[[31;01m*^[[0m CC [M] fs/ocfs2/stackglue.o
^[[31;01m*^[[0m CC net/ipv4/tcp_timer.o
^[[31;01m*^[[0mduring RTL pass: mach
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c: In function 'LZ4_decompress_fast':
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c:358:1: internal compiler ^[[1m^[[Kerror:^[[m^[[K in sel_target_adjust_priority, at sel-sched.c:3334
^[[31;01m*^[[0m 358 | }
^[[31;01m*^[[0m | ^
^[[31;01m*^[[0mPlease submit a full bug report,
^[[31;01m*^[[0mwith preprocessed source if appropriate.
^[[31;01m*^[[0mSee <https://bugs.gentoo.org/> for instructions.
^[[31;01m*^[[0mmake[2]: *** [scripts/Makefile.build:304: lib/lz4/lz4_decompress.o] ^[[1m^[[KError ^[[m^[[K1
^[[31;01m*^[[0mmake[1]: *** [scripts/Makefile.build:544: lib/lz4] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0mmake: *** [Makefile:1046: lib] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./arch/ia64/include/asm/intrinsics.h:11,
^[[31;01m*^[[0m from ./arch/ia64/include/asm/bitops.h:19,
^[[31;01m*^[[0m from ./include/linux/bitops.h:19,
^[[31;01m*^[[0m from drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:11:
^[[31;01m*^[[0mdrivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function 'ixgbevf_xdp_setup':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191204T031007Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191204T031007Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191204T031007Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191204T031007Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
04 Dec 2019 06:38:13 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
04 Dec 2019 06:38:13 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
04 Dec 2019 06:38:13 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
04 Dec 2019 06:38:13 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
4433.11user 173.77system 29:12.18elapsed 262%CPU (0avgtext+0avgdata 231872maxresident)k
0inputs+0outputs (0major+19591087minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191204T031007Z.0IMakY/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-12-03 22:15 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-12-03 22:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Moving kernel sources to /tmp/kerncache/gentoo/sources ...
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.5.3.3^[[0m
^[[32;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191203T031006Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191203T031006Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191203T031006Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191203T031006Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m4.19.82-gentoo^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 4.19.82-gentoo ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Thermal Zone (ACPI_THERMAL) [Y/n/m/?] y
^[[31;01m*^[[0m NUMA support (ACPI_NUMA) [Y/?] y
^[[31;01m*^[[0m Debug Statements (ACPI_DEBUG) [N/y/?] n
^[[31;01m*^[[0m PCI slot detection driver (ACPI_PCI_SLOT) [N/y/?] n
^[[31;01m*^[[0m Container and Module Devices (ACPI_CONTAINER) [Y/?] y
^[[31;01m*^[[0m Hardware ^[[1m^[[KError ^[[m^[[KDevice (ACPI_HED) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Bus options (PCI, PCMCIA)
^[[31;01m*^[[0m
^[[31;01m*^[[0mPCI support (PCI) [Y/?] y
^[[31;01m*^[[0mPCI Express Port Bus support (PCIEPORTBUS) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Hotplug driver (HOTPLUG_PCI_PCIE) [Y/n/?] y
^[[31;01m*^[[0m PCI Express Advanced ^[[1m^[[KError ^[[m^[[KReporting support (PCIEAER) [Y/n/?] y
^[[31;01m*^[[0m PCI Express ^[[1m^[[Kerror ^[[m^[[Kinjection support (PCIEAER_INJECT) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Inter-FE based on IETF ForCES InterFE LFB
^[[31;01m*^[[0m *
^[[31;01m*^[[0m Inter-FE based on IETF ForCES InterFE LFB (NET_IFE) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Network light weight tunnels (LWTUNNEL) [N/y/?] (NEW)
^[[31;01m*^[[0m Network physical/parent device Netlink interface (NET_DEVLINK) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Generic ^[[1m^[[Kfail^[[m^[[Kover module (^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSCSI OnStream SC-x0 tape support (CHR_DEV_OSST) [N/m/y/?] n
^[[31;01m*^[[0mSCSI CDROM support (BLK_DEV_SR) [Y/n/m/?] y
^[[31;01m*^[[0m Enable vendor-specific extensions (for SCSI CDROM) (BLK_DEV_SR_VENDOR) [Y/n/?] y
^[[31;01m*^[[0mSCSI generic support (CHR_DEV_SG) [Y/n/m/?] y
^[[31;01m*^[[0mSCSI media changer support (CHR_DEV_SCH) [N/m/y/?] n
^[[31;01m*^[[0mVerbose SCSI ^[[1m^[[Kerror ^[[m^[[Kreporting (kernel size += 36K) (SCSI_CONSTANTS) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mOSD-Initiator library (SCSI_OSD_INITIATOR) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers (libata)
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (libata) (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m * Enable WiMAX (Networking options) to see the WiMAX drivers
^[[31;01m*^[[0m *
^[[31;01m*^[[0m VMware VMXNET3 ethernet driver (VMXNET3) [N/m/y/?] n
^[[31;01m*^[[0m FUJITSU Extended Socket Network Device driver (FUJITSU_ES) [N/m/y/?] (NEW)
^[[31;01m*^[[0m Simulated networking device (NETDEVSIM) [N/m/y/?] (NEW)
^[[31;01m*^[[0m ^[[1m^[[KFail^[[m^[[Kover driver (NET_^[[1m^[[KFAIL^[[m^[[KOVER) [N/m/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS online metadata check support (XFS_ONLINE_SCRUB) [N/y/?] (NEW)
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mEnable tracing for RCU (RCU_TRACE) [N/y/?] n
^[[31;01m*^[[0mProvide debugging asserts for adding NO_HZ support to an arch (RCU_EQS_DEBUG) [N/y/?] (NEW)
^[[31;01m*^[[0mForce round-robin CPU selection for unbound work items (DEBUG_WQ_FORCE_RR_CPU) [N/y/?] (NEW)
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mEnable CPU hotplug state control (CPU_HOTPLUG_STATE_CONTROL) [N/y/?] (NEW)
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m UPD include/generated/timeconst.h
^[[31;01m*^[[0m UPD include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m UPD include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m HOSTCC scripts/genksyms/genksyms.o
^[[31;01m*^[[0m CC scripts/mod/empty.o
^[[31;01m*^[[0m HOSTCC scripts/mod/mk_elfconfig
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m HOSTCC scripts/kallsyms
^[[31;01m*^[[0m<stdin>:1185:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1239:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall seccomp not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1317:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_mprotect not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1320:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_alloc not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1323:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall pkey_free not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1326:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall statx not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1332:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall io_pgetevents not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1335:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall rseq not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/fork.o
^[[31;01m*^[[0m CC kernel/time/timecounter.o
^[[31;01m*^[[0m CC kernel/time/alarmtimer.o
^[[31;01m*^[[0m CC [M] crypto/ctr.o
^[[31;01m*^[[0m CC fs/ext4/indirect.o
^[[31;01m*^[[0mkernel/fork.c:723:13: ^[[1m^[[Kwarning^[[m^[[K: 'task_struct_whitelist' defined but not used [-Wunused-function]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./include/linux/wait.h:7,
^[[31;01m*^[[0m from ./include/linux/wait_bit.h:8,
^[[31;01m*^[[0m from ./include/linux/fs.h:6,
^[[31;01m*^[[0m from fs/ocfs2/file.c:27:
^[[31;01m*^[[0mfs/ocfs2/file.c: In function 'ocfs2_file_write_iter':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC drivers/message/fusion/mptsas.o
^[[31;01m*^[[0m CC [M] net/sunrpc/sysctl.o
^[[31;01m*^[[0m CC fs/xfs/libxfs/xfs_dir2_data.o
^[[31;01m*^[[0mduring RTL pass: mach
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c: In function 'LZ4_decompress_fast':
^[[31;01m*^[[0mlib/lz4/lz4_decompress.c:358:1: internal compiler ^[[1m^[[Kerror:^[[m^[[K in sel_target_adjust_priority, at sel-sched.c:3334
^[[31;01m*^[[0m 358 | }
^[[31;01m*^[[0m | ^
^[[31;01m*^[[0mPlease submit a full bug report,
^[[31;01m*^[[0mwith preprocessed source if appropriate.
^[[31;01m*^[[0mSee <https://bugs.gentoo.org/> for instructions.
^[[31;01m*^[[0mmake[2]: *** [scripts/Makefile.build:304: lib/lz4/lz4_decompress.o] ^[[1m^[[KError ^[[m^[[K1
^[[31;01m*^[[0mmake[1]: *** [scripts/Makefile.build:544: lib/lz4] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0mmake: *** [Makefile:1046: lib] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m from ./arch/ia64/include/asm/intrinsics.h:11,
^[[31;01m*^[[0m from ./arch/ia64/include/asm/bitops.h:19,
^[[31;01m*^[[0m from ./include/linux/bitops.h:19,
^[[31;01m*^[[0m from drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:11:
^[[31;01m*^[[0mdrivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function 'ixgbevf_xdp_setup':
^[[31;01m*^[[0m./arch/ia64/include/uapi/asm/cmpxchg.h:57:2: ^[[1m^[[Kwarning^[[m^[[K: value computed is not used [-Wunused-value]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20191203T031006Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20191203T031006Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20191203T031006Z.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20191203T031006Z.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
03 Dec 2019 22:15:30 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
03 Dec 2019 22:15:30 UTC: ERROR : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
03 Dec 2019 22:15:30 UTC: ERROR : Exception running action sequence build_kernel
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
self._build_kernel(kname = kname)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
03 Dec 2019 22:15:30 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
4576.30user 178.24system 55:51.58elapsed 141%CPU (0avgtext+0avgdata 231872maxresident)k
0inputs+0outputs (320major+19602609minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191203T031006Z.TPvccl/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2019-05-24 20:15 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2019-05-24 20:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/home/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/home/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage2
Building natively for ia64
Caching snapshot to /home/catalyst/snapshot_cache/20190524T031002Z/
The autoresume path is /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20190524T031002Z/
Location of the package cache is /home/catalyst/packages/default/livecd-stage2-ia64-20190524T031002Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20190524T031002Z/
--- Running action sequence: unpack
Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20190524T031002Z/
to /home/catalyst/tmp/default/livecd-stage2-ia64-20190524T031002Z/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
--- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20190524T031002Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20190524T031002Z//tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20190524T031002Z/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot genkernel
[ebuild N ] app-arch/cpio-2.12-r1
[ebuild N ] sys-kernel/linux-firmware-20190514
[ebuild N ] sys-kernel/genkernel-3.5.3.3
The following license changes are necessary to proceed:
(see "package.license" in the portage(5) man page for more details)
# required by sys-kernel/genkernel-3.5.3.3::gentoo[firmware]
# required by genkernel (argument)
=sys-kernel/linux-firmware-20190514 linux-fw-redistributable no-source-code
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: Runscript pre-kmerge failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1426, in build_kernel
env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1433, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/livecd-stage2-ia64-20190524T031002Z/.catalyst_lock'
Full build log at /tmp/catalyst-auto.20190524T031002Z.t7WmZP/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2018-06-27 17:57 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2018-06-27 17:57 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/home/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/home/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage2
Building natively for ia64
Caching snapshot to /home/catalyst/snapshot_cache/20180627T031002Z/
The autoresume path is /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20180627T031002Z/
Location of the package cache is /home/catalyst/packages/default/livecd-stage2-ia64-20180627T031002Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20180627T031002Z/
--- Running action sequence: unpack
Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20180627T031002Z/
to /home/catalyst/tmp/default/livecd-stage2-ia64-20180627T031002Z/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
--- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180627T031002Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180627T031002Z//tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20180627T031002Z/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot genkernel
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-kernel/genkernel-3.5.3.3
>>> Emerging (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging (2 of 3) sys-kernel/linux-firmware-20180103-r1::gentoo
>>> Installing (2 of 3) sys-kernel/linux-firmware-20180103-r1::gentoo
>>> Emerging (3 of 3) sys-kernel/genkernel-3.5.3.3::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-3.5.3.3::gentoo
* Messages for package sys-kernel/linux-firmware-20180103-r1:
* Your configuration for sys-kernel/linux-firmware-20180103-r1 has been saved in
* /etc/portage/savedconfig/sys-kernel/linux-firmware-20180103-r1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-3.5.3.3:
* Documentation is available in the genkernel manual page
* as well as the following URL:
* https://wiki.gentoo.org/wiki/Genkernel
* This package is known to not work with reiser4. If you are running
* reiser4 and have a problem, do not file a bug. We know it does not
* work and we don't plan on fixing it since reiser4 is the one that is
* broken in this regard. Try using a sane filesystem like ext4.
* The LUKS support has changed from versions prior to 3.4.4. Now,
* you use crypt_root=/dev/blah instead of real_root=luks:/dev/blah.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20180627T031002Z//tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20180627T031002Z//tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180627T031002Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180627T031002Z//tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20180627T031002Z/
>>> Regenerating /etc/ld.so.cache...
Genkernel version 3.5.3.3 found ... continuing
emerge --quiet --usepkg --buildpkg --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.06.95-r2::gentoo
>>> Emerging (2 of 2) sys-kernel/gentoo-sources-4.9.95::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-4.9.95::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.9.95:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Error: --dmraid requires sys-fs/dmraid
to be installed on the host system.
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1428, in build_kernel
self._build_kernel(kname=kname)
File "modules/generic_stage_target.py", line 1472, in _build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1433, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/livecd-stage2-ia64-20180627T031002Z/.catalyst_lock'
Command exited with non-zero status 1
711.29user 113.62system 17:28.57elapsed 78%CPU (0avgtext+0avgdata 447472maxresident)k
0inputs+0outputs (132major+8675616minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180627T031002Z.BXlkOE/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2018-06-26 17:52 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2018-06-26 17:52 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/home/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/home/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage2
Building natively for ia64
Caching snapshot to /home/catalyst/snapshot_cache/20180626T031004Z/
The autoresume path is /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20180626T031004Z/
Location of the package cache is /home/catalyst/packages/default/livecd-stage2-ia64-20180626T031004Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20180626T031004Z/
--- Running action sequence: unpack
Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20180626T031004Z/
to /home/catalyst/tmp/default/livecd-stage2-ia64-20180626T031004Z/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
--- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180626T031004Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180626T031004Z//tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20180626T031004Z/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot genkernel
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-kernel/genkernel-3.5.3.3
>>> Emerging (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging (2 of 3) sys-kernel/linux-firmware-20180103-r1::gentoo
>>> Installing (2 of 3) sys-kernel/linux-firmware-20180103-r1::gentoo
>>> Emerging (3 of 3) sys-kernel/genkernel-3.5.3.3::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-3.5.3.3::gentoo
* Messages for package sys-kernel/linux-firmware-20180103-r1:
* Your configuration for sys-kernel/linux-firmware-20180103-r1 has been saved in
* /etc/portage/savedconfig/sys-kernel/linux-firmware-20180103-r1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-3.5.3.3:
* Documentation is available in the genkernel manual page
* as well as the following URL:
* https://wiki.gentoo.org/wiki/Genkernel
* This package is known to not work with reiser4. If you are running
* reiser4 and have a problem, do not file a bug. We know it does not
* work and we don't plan on fixing it since reiser4 is the one that is
* broken in this regard. Try using a sane filesystem like ext4.
* The LUKS support has changed from versions prior to 3.4.4. Now,
* you use crypt_root=/dev/blah instead of real_root=luks:/dev/blah.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20180626T031004Z//tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20180626T031004Z//tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180626T031004Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180626T031004Z//tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20180626T031004Z/
>>> Regenerating /etc/ld.so.cache...
Genkernel version 3.5.3.3 found ... continuing
emerge --quiet --usepkg --buildpkg --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.06.95-r2::gentoo
>>> Emerging (2 of 2) sys-kernel/gentoo-sources-4.9.95::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-4.9.95::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.9.95:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Error: --dmraid requires sys-fs/dmraid
to be installed on the host system.
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1428, in build_kernel
self._build_kernel(kname=kname)
File "modules/generic_stage_target.py", line 1472, in _build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1433, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/livecd-stage2-ia64-20180626T031004Z/.catalyst_lock'
Command exited with non-zero status 1
710.52user 115.22system 17:22.73elapsed 79%CPU (0avgtext+0avgdata 447488maxresident)k
0inputs+0outputs (330major+8671158minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180626T031004Z.Gp6Laf/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2018-06-25 18:22 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2018-06-25 18:22 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/home/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/home/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage2
Building natively for ia64
Caching snapshot to /home/catalyst/snapshot_cache/20180625T031015Z/
The autoresume path is /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20180625T031015Z/
Location of the package cache is /home/catalyst/packages/default/livecd-stage2-ia64-20180625T031015Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20180625T031015Z/
--- Running action sequence: unpack
Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20180625T031015Z/
to /home/catalyst/tmp/default/livecd-stage2-ia64-20180625T031015Z/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
--- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180625T031015Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180625T031015Z//tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20180625T031015Z/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot genkernel
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-kernel/genkernel-3.5.3.3
>>> Emerging (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging (2 of 3) sys-kernel/linux-firmware-20180103-r1::gentoo
>>> Installing (2 of 3) sys-kernel/linux-firmware-20180103-r1::gentoo
>>> Emerging (3 of 3) sys-kernel/genkernel-3.5.3.3::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-3.5.3.3::gentoo
* Messages for package sys-kernel/linux-firmware-20180103-r1:
* Your configuration for sys-kernel/linux-firmware-20180103-r1 has been saved in
* /etc/portage/savedconfig/sys-kernel/linux-firmware-20180103-r1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-3.5.3.3:
* Documentation is available in the genkernel manual page
* as well as the following URL:
* https://wiki.gentoo.org/wiki/Genkernel
* This package is known to not work with reiser4. If you are running
* reiser4 and have a problem, do not file a bug. We know it does not
* work and we don't plan on fixing it since reiser4 is the one that is
* broken in this regard. Try using a sane filesystem like ext4.
* The LUKS support has changed from versions prior to 3.4.4. Now,
* you use crypt_root=/dev/blah instead of real_root=luks:/dev/blah.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20180625T031015Z//tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20180625T031015Z//tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180625T031015Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180625T031015Z//tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20180625T031015Z/
>>> Regenerating /etc/ld.so.cache...
Genkernel version 3.5.3.3 found ... continuing
emerge --quiet --usepkg --buildpkg --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.06.95-r2::gentoo
>>> Emerging (2 of 2) sys-kernel/gentoo-sources-4.9.95::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-4.9.95::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.9.95:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Error: --dmraid requires sys-fs/dmraid
to be installed on the host system.
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1428, in build_kernel
self._build_kernel(kname=kname)
File "modules/generic_stage_target.py", line 1472, in _build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1433, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/livecd-stage2-ia64-20180625T031015Z/.catalyst_lock'
Command exited with non-zero status 1
713.12user 114.38system 18:10.12elapsed 75%CPU (0avgtext+0avgdata 446688maxresident)k
0inputs+0outputs (487major+8663960minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180625T031015Z.MfJvxz/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2018-06-24 18:18 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2018-06-24 18:18 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/home/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/home/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage2
Building natively for ia64
Caching snapshot to /home/catalyst/snapshot_cache/20180624T031003Z/
The autoresume path is /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20180624T031003Z/
Location of the package cache is /home/catalyst/packages/default/livecd-stage2-ia64-20180624T031003Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20180624T031003Z/
--- Running action sequence: unpack
Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20180624T031003Z/
to /home/catalyst/tmp/default/livecd-stage2-ia64-20180624T031003Z/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
--- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180624T031003Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180624T031003Z//tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20180624T031003Z/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot genkernel
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-kernel/genkernel-3.5.3.3
>>> Emerging (1 of 3) sys-kernel/linux-firmware-20180103-r1::gentoo
>>> Installing (1 of 3) sys-kernel/linux-firmware-20180103-r1::gentoo
>>> Emerging (2 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (2 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging (3 of 3) sys-kernel/genkernel-3.5.3.3::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-3.5.3.3::gentoo
* Messages for package sys-kernel/linux-firmware-20180103-r1:
* Your configuration for sys-kernel/linux-firmware-20180103-r1 has been saved in
* /etc/portage/savedconfig/sys-kernel/linux-firmware-20180103-r1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-3.5.3.3:
* Documentation is available in the genkernel manual page
* as well as the following URL:
* https://wiki.gentoo.org/wiki/Genkernel
* This package is known to not work with reiser4. If you are running
* reiser4 and have a problem, do not file a bug. We know it does not
* work and we don't plan on fixing it since reiser4 is the one that is
* broken in this regard. Try using a sane filesystem like ext4.
* The LUKS support has changed from versions prior to 3.4.4. Now,
* you use crypt_root=/dev/blah instead of real_root=luks:/dev/blah.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20180624T031003Z//tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20180624T031003Z//tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180624T031003Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180624T031003Z//tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20180624T031003Z/
>>> Regenerating /etc/ld.so.cache...
Genkernel version 3.5.3.3 found ... continuing
emerge --quiet --usepkg --buildpkg --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.06.95-r2::gentoo
>>> Emerging (2 of 2) sys-kernel/gentoo-sources-4.9.95::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-4.9.95::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.9.95:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Error: --dmraid requires sys-fs/dmraid
to be installed on the host system.
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1428, in build_kernel
self._build_kernel(kname=kname)
File "modules/generic_stage_target.py", line 1472, in _build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1433, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/livecd-stage2-ia64-20180624T031003Z/.catalyst_lock'
Command exited with non-zero status 1
711.00user 113.42system 17:01.09elapsed 80%CPU (0avgtext+0avgdata 444832maxresident)k
0inputs+0outputs (593major+8676030minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180624T031003Z.hzDWPc/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2018-06-22 17:50 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2018-06-22 17:50 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/home/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/home/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage2
Building natively for ia64
Caching snapshot to /home/catalyst/snapshot_cache/20180622T031002Z/
The autoresume path is /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20180622T031002Z/
Location of the package cache is /home/catalyst/packages/default/livecd-stage2-ia64-20180622T031002Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20180622T031002Z/
--- Running action sequence: unpack
Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20180622T031002Z/
to /home/catalyst/tmp/default/livecd-stage2-ia64-20180622T031002Z/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
--- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180622T031002Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180622T031002Z//tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20180622T031002Z/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot genkernel
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-kernel/genkernel-3.5.3.3
>>> Emerging (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging (2 of 3) sys-kernel/linux-firmware-20180103-r1::gentoo
>>> Installing (2 of 3) sys-kernel/linux-firmware-20180103-r1::gentoo
>>> Emerging (3 of 3) sys-kernel/genkernel-3.5.3.3::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-3.5.3.3::gentoo
* Messages for package sys-kernel/linux-firmware-20180103-r1:
* Your configuration for sys-kernel/linux-firmware-20180103-r1 has been saved in
* /etc/portage/savedconfig/sys-kernel/linux-firmware-20180103-r1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-3.5.3.3:
* Documentation is available in the genkernel manual page
* as well as the following URL:
* https://wiki.gentoo.org/wiki/Genkernel
* This package is known to not work with reiser4. If you are running
* reiser4 and have a problem, do not file a bug. We know it does not
* work and we don't plan on fixing it since reiser4 is the one that is
* broken in this regard. Try using a sane filesystem like ext4.
* The LUKS support has changed from versions prior to 3.4.4. Now,
* you use crypt_root=/dev/blah instead of real_root=luks:/dev/blah.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20180622T031002Z//tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20180622T031002Z//tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180622T031002Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180622T031002Z//tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20180622T031002Z/
>>> Regenerating /etc/ld.so.cache...
Genkernel version 3.5.3.3 found ... continuing
emerge --quiet --usepkg --buildpkg --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.06.95-r2::gentoo
>>> Emerging (2 of 2) sys-kernel/gentoo-sources-4.9.95::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-4.9.95::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.9.95:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Error: --dmraid requires sys-fs/dmraid
to be installed on the host system.
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1428, in build_kernel
self._build_kernel(kname=kname)
File "modules/generic_stage_target.py", line 1472, in _build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1433, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/livecd-stage2-ia64-20180622T031002Z/.catalyst_lock'
Command exited with non-zero status 1
697.82user 112.43system 16:25.67elapsed 82%CPU (0avgtext+0avgdata 447440maxresident)k
0inputs+0outputs (346major+8672425minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180622T031002Z.PNl3kv/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2018-06-21 21:48 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2018-06-21 21:48 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/home/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/home/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage2
Building natively for ia64
Caching snapshot to /home/catalyst/snapshot_cache/20180621T031002Z/
The autoresume path is /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20180621T031002Z/
Location of the package cache is /home/catalyst/packages/default/livecd-stage2-ia64-20180621T031002Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20180621T031002Z/
--- Running action sequence: unpack
Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20180621T031002Z/
to /home/catalyst/tmp/default/livecd-stage2-ia64-20180621T031002Z/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
--- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180621T031002Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180621T031002Z//tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20180621T031002Z/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot genkernel
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-kernel/genkernel-3.5.3.3
>>> Emerging (1 of 3) sys-kernel/linux-firmware-20180103-r1::gentoo
>>> Installing (1 of 3) sys-kernel/linux-firmware-20180103-r1::gentoo
>>> Emerging (2 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (2 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging (3 of 3) sys-kernel/genkernel-3.5.3.3::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-3.5.3.3::gentoo
* Messages for package sys-kernel/linux-firmware-20180103-r1:
* Your configuration for sys-kernel/linux-firmware-20180103-r1 has been saved in
* /etc/portage/savedconfig/sys-kernel/linux-firmware-20180103-r1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-3.5.3.3:
* Documentation is available in the genkernel manual page
* as well as the following URL:
* https://wiki.gentoo.org/wiki/Genkernel
* This package is known to not work with reiser4. If you are running
* reiser4 and have a problem, do not file a bug. We know it does not
* work and we don't plan on fixing it since reiser4 is the one that is
* broken in this regard. Try using a sane filesystem like ext4.
* The LUKS support has changed from versions prior to 3.4.4. Now,
* you use crypt_root=/dev/blah instead of real_root=luks:/dev/blah.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20180621T031002Z//tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20180621T031002Z//tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180621T031002Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180621T031002Z//tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20180621T031002Z/
>>> Regenerating /etc/ld.so.cache...
Genkernel version 3.5.3.3 found ... continuing
emerge --quiet --usepkg --buildpkg --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.06.95-r2::gentoo
>>> Emerging (2 of 2) sys-kernel/gentoo-sources-4.9.95::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-4.9.95::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.9.95:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Error: --dmraid requires sys-fs/dmraid
to be installed on the host system.
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1428, in build_kernel
self._build_kernel(kname=kname)
File "modules/generic_stage_target.py", line 1472, in _build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1433, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/livecd-stage2-ia64-20180621T031002Z/.catalyst_lock'
Command exited with non-zero status 1
709.24user 123.93system 15:43.13elapsed 88%CPU (0avgtext+0avgdata 447856maxresident)k
0inputs+0outputs (3major+8677032minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180621T031002Z.s3MtVm/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2018-06-19 18:28 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2018-06-19 18:28 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/home/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/home/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage2
Building natively for ia64
Caching snapshot to /home/catalyst/snapshot_cache/20180619T031004Z/
The autoresume path is /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20180619T031004Z/
Location of the package cache is /home/catalyst/packages/default/livecd-stage2-ia64-20180619T031004Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20180619T031004Z/
--- Running action sequence: unpack
Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20180619T031004Z/
to /home/catalyst/tmp/default/livecd-stage2-ia64-20180619T031004Z/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
--- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180619T031004Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180619T031004Z//tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20180619T031004Z/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot genkernel
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-kernel/genkernel-3.5.3.3
>>> Emerging (1 of 3) sys-kernel/linux-firmware-20180103-r1::gentoo
>>> Installing (1 of 3) sys-kernel/linux-firmware-20180103-r1::gentoo
>>> Emerging (2 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (2 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging (3 of 3) sys-kernel/genkernel-3.5.3.3::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-3.5.3.3::gentoo
* Messages for package sys-kernel/linux-firmware-20180103-r1:
* Your configuration for sys-kernel/linux-firmware-20180103-r1 has been saved in
* /etc/portage/savedconfig/sys-kernel/linux-firmware-20180103-r1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-3.5.3.3:
* Documentation is available in the genkernel manual page
* as well as the following URL:
* https://wiki.gentoo.org/wiki/Genkernel
* This package is known to not work with reiser4. If you are running
* reiser4 and have a problem, do not file a bug. We know it does not
* work and we don't plan on fixing it since reiser4 is the one that is
* broken in this regard. Try using a sane filesystem like ext4.
* The LUKS support has changed from versions prior to 3.4.4. Now,
* you use crypt_root=/dev/blah instead of real_root=luks:/dev/blah.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20180619T031004Z//tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20180619T031004Z//tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180619T031004Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180619T031004Z//tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20180619T031004Z/
>>> Regenerating /etc/ld.so.cache...
Genkernel version 3.5.3.3 found ... continuing
emerge --quiet --usepkg --buildpkg --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.06.95-r2::gentoo
>>> Emerging (2 of 2) sys-kernel/gentoo-sources-4.9.95::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-4.9.95::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.9.95:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Error: --dmraid requires sys-fs/dmraid
to be installed on the host system.
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1428, in build_kernel
self._build_kernel(kname=kname)
File "modules/generic_stage_target.py", line 1472, in _build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1433, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/livecd-stage2-ia64-20180619T031004Z/.catalyst_lock'
Command exited with non-zero status 1
689.70user 120.22system 15:23.51elapsed 87%CPU (0avgtext+0avgdata 447200maxresident)k
0inputs+0outputs (10major+8647934minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180619T031004Z.4HGHYL/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2018-06-18 17:28 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2018-06-18 17:28 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f installcd-stage2-minimal.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/home/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/home/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage2
Building natively for ia64
Caching snapshot to /home/catalyst/snapshot_cache/20180618T031003Z/
The autoresume path is /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20180618T031003Z/
Location of the package cache is /home/catalyst/packages/default/livecd-stage2-ia64-20180618T031003Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /home/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20180618T031003Z/
--- Running action sequence: unpack
Starting rsync from /home/catalyst/tmp/default/livecd-stage1-ia64-20180618T031003Z/
to /home/catalyst/tmp/default/livecd-stage2-ia64-20180618T031003Z/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
--- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180618T031003Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180618T031003Z//tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20180618T031003Z/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot genkernel
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-kernel/genkernel-3.5.3.3
>>> Emerging (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging (2 of 3) sys-kernel/linux-firmware-20180103-r1::gentoo
>>> Installing (2 of 3) sys-kernel/linux-firmware-20180103-r1::gentoo
>>> Emerging (3 of 3) sys-kernel/genkernel-3.5.3.3::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-3.5.3.3::gentoo
* Messages for package sys-kernel/linux-firmware-20180103-r1:
* Your configuration for sys-kernel/linux-firmware-20180103-r1 has been saved in
* /etc/portage/savedconfig/sys-kernel/linux-firmware-20180103-r1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* If you are only interested in particular firmware files, edit the saved
* configfile and remove those that you do not want.
* Messages for package sys-kernel/genkernel-3.5.3.3:
* Documentation is available in the genkernel manual page
* as well as the following URL:
* https://wiki.gentoo.org/wiki/Genkernel
* This package is known to not work with reiser4. If you are running
* reiser4 and have a problem, do not file a bug. We know it does not
* work and we don't plan on fixing it since reiser4 is the one that is
* broken in this regard. Try using a sane filesystem like ext4.
* The LUKS support has changed from versions prior to 3.4.4. Now,
* you use crypt_root=/dev/blah instead of real_root=luks:/dev/blah.
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20180618T031003Z//tmp/pre-kmerge.sh from the chroot
removing /home/catalyst/tmp/default/livecd-stage2-ia64-20180618T031003Z//tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180618T031003Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/livecd-stage2-ia64-20180618T031003Z//tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot /home/catalyst/tmp/default/livecd-stage2-ia64-20180618T031003Z/
>>> Regenerating /etc/ld.so.cache...
Genkernel version 3.5.3.3 found ... continuing
emerge --quiet --usepkg --buildpkg --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.06.95-r2::gentoo
>>> Emerging (2 of 2) sys-kernel/gentoo-sources-4.9.95::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-4.9.95::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-4.9.95:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Error: --dmraid requires sys-fs/dmraid
to be installed on the host system.
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1428, in build_kernel
self._build_kernel(kname=kname)
File "modules/generic_stage_target.py", line 1472, in _build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1433, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/livecd-stage2-ia64-20180618T031003Z/.catalyst_lock'
Command exited with non-zero status 1
703.51user 113.58system 17:43.70elapsed 76%CPU (0avgtext+0avgdata 446928maxresident)k
0inputs+0outputs (1705major+8637569minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180618T031003Z.ZFLhYk/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2014-06-24 13:11 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2014-06-24 13:11 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
livecd: removing /usr/lib*/perl5/site_perl
livecd: removing /usr/lib*/gcc-lib/*/*/libgcj*
livecd: removing /usr/sbin/archive-conf
livecd: removing /usr/sbin/dispatch-conf
livecd: removing /usr/sbin/emaint
livecd: removing /usr/sbin/emerge-webrsync
livecd: removing /usr/sbin/env-update
livecd: removing /usr/sbin/fb*
livecd: removing /usr/sbin/fixpackages
livecd: removing /usr/sbin/quickpkg
livecd: removing /usr/sbin/regenworld
livecd: removing /usr/share/consolefonts/1*
livecd: removing /usr/share/consolefonts/7*
livecd: removing /usr/share/consolefonts/8*
livecd: removing /usr/share/consolefonts/9*
livecd: removing /usr/share/consolefonts/A*
livecd: removing /usr/share/consolefonts/C*
livecd: removing /usr/share/consolefonts/E*
livecd: removing /usr/share/consolefonts/G*
livecd: removing /usr/share/consolefonts/L*
livecd: removing /usr/share/consolefonts/M*
livecd: removing /usr/share/consolefonts/R*
livecd: removing /usr/share/consolefonts/a*
livecd: removing /usr/share/consolefonts/c*
livecd: removing /usr/share/consolefonts/dr*
livecd: removing /usr/share/consolefonts/g*
livecd: removing /usr/share/consolefonts/i*
livecd: removing /usr/share/consolefonts/k*
livecd: removing /usr/share/consolefonts/l*
livecd: removing /usr/share/consolefonts/r*
livecd: removing /usr/share/consolefonts/s*
livecd: removing /usr/share/consolefonts/t*
livecd: removing /usr/share/consolefonts/v*
livecd: removing /usr/share/misc/*.old
--- Running action sequence: empty
Emptying directory /etc/cron.daily
/etc/cron.hourly not a directory or does not exist, skipping 'empty' operation.
/etc/cron.monthly not a directory or does not exist, skipping 'empty' operation.
/etc/cron.weekly not a directory or does not exist, skipping 'empty' operation.
Emptying directory /etc/logrotate.d
/etc/modules.autoload.d not a directory or does not exist, skipping 'empty' operation.
/etc/runlevels/single not a directory or does not exist, skipping 'empty' operation.
Emptying directory /etc/skel
/lib/dev-state not a directory or does not exist, skipping 'empty' operation.
/lib/udev-state not a directory or does not exist, skipping 'empty' operation.
/lib64/dev-state not a directory or does not exist, skipping 'empty' operation.
/lib64/udev-state not a directory or does not exist, skipping 'empty' operation.
/root/.ccache not a directory or does not exist, skipping 'empty' operation.
Emptying directory /tmp
/usr/diet/include not a directory or does not exist, skipping 'empty' operation.
/usr/diet/man not a directory or does not exist, skipping 'empty' operation.
/usr/i386-gentoo-linux-uclibc not a directory or does not exist, skipping 'empty' operation.
/usr/i386-pc-linux-gnu not a directory or does not exist, skipping 'empty' operation.
/usr/i386-pc-linux-uclibc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/config not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/doc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/etc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/awk not a directory or does not exist, skipping 'empty' operation.
/usr/lib/ccache not a directory or does not exist, skipping 'empty' operation.
/usr/lib/gcc-config not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/lib/gconv
Emptying directory /usr/lib/nfs
/usr/lib/perl5/site_perl not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/lib/portage
/usr/lib/python2.2 not a directory or does not exist, skipping 'empty' operation.
/usr/lib/python2.3 not a directory or does not exist, skipping 'empty' operation.
/usr/lib/python2.4/test not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/config not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/doc not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/etc not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/awk not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/ccache not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/gcc-config not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/gconv not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/nfs not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/perl5/site_perl not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/portage not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.2 not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.3 not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.4/test not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/local
Emptying directory /usr/portage
/usr/powerpc-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
/usr/powerpc64-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/aclocal
Emptying directory /usr/share/baselayout
/usr/share/binutils-data not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/consolefonts/partialfonts
Emptying directory /usr/share/consoletrans
Emptying directory /usr/share/dict
Emptying directory /usr/share/doc
/usr/share/emacs not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/et
Emptying directory /usr/share/gcc-data
/usr/share/genkernel not a directory or does not exist, skipping 'empty' operation.
/usr/share/gettext not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/glib-2.0
/usr/share/gnuconfig not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/gtk-doc
Emptying directory /usr/share/i18n
Emptying directory /usr/share/info
/usr/share/lcms not a directory or does not exist, skipping 'empty' operation.
/usr/share/libtool not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/locale
Emptying directory /usr/share/man
/usr/share/rfc not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/ss
/usr/share/state not a directory or does not exist, skipping 'empty' operation.
/usr/share/texinfo not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/unimaps
Emptying directory /usr/share/zoneinfo
/usr/sparc-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/src
/usr/x86_64-pc-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /var/cache
Emptying directory /var/empty
Emptying directory /var/lib/portage
Emptying directory /var/log
Emptying directory /var/spool
/var/state not a directory or does not exist, skipping 'empty' operation.
Emptying directory /var/tmp
--- Running action sequence: target_setup
Setting up filesystems per filesystem type
Creating squashfs...
Parallel mksquashfs: Using 4 processors
Creating 4.0 filesystem on /home/catalyst/builds/default/livecd-stage2-ia64-20140624//image.squashfs, block size 131072.
\r[\ ] 400/33224 1%\r[| ] 500/33224 1%\r[=| ] 600/33224 1%\r[=| ] 700/33224 2%\r[=| ] 800/33224 2%\r[=/ ] 1100/33224 3%\r[==| ] 1600/33224 4%\r[===| ] 2000/33224 6%\r[====- ] 2600/33224 7%\r[=====\ ] 2900/33224 8%\r[======| ] 3600/33224 10%\r[======| ] 3700/33224 11%\r[======|
] 3800/33224 11%\r[======/ ] 3900/33224 11%\r[=======/ ] 4000/33224 12%\r[=======/ ] 4100/33224 12%\r[=======/ ] 4200/33224 12%\r[=======/ ] 4300/33224 12%\r[=======/ ] 4400/33224 13%\r[=======/ ] 4500/33224 13%\r[========/ ] 4600/33224 13%\r[========/ ] 4700/33224 14%\r[========/ ] 4800/33224 14%\r[========/ ] 4900/33224 14%\r[========/ ] 5000/33224
15%\r[=========/ \0 ] 5100/33224 15%\r[=========/ ] 5200/33224 15%\r[=========/ ] 5300/33224 15%\r[=========/ ] 5500/33224 16%\r[==========- ] 5800/33224 17%\r[==========- ] 5900/33224 17%\r[==========- ] 6000/33224 18%\r[==========- ] 6100/33224 18%\r[===========- ] 6200/33224 18%\r[===========- ] 6300/33224 18%\r[===========- ] 6400/33224 19%\r[===========- ] 6500/33224 19%\r[===========-
] 6600/33224 19%\r[===========- ] 6700/33224 20%\r[============- ] 7000/33224 21%\r[============- ] 7100/33224 21%\r[============\ ] 7200/33224 21%\r[============\ ] 7300/33224 21%\r[=============\ ] 7400/33224 22%\r[=============\ ] 7500/33224 22%\r[=============\ ] 7600/33224 22%\r[=============\ ] 7700/33224 23%\r[=============\ ] 7800/33224 23%\r[==============\ ] 7900/33224 23%\r[==============\ ] 800
0/33224 24%\r[==============\ ] 8100/33224 24%\r[==============\0\ ] 8200/33224 24%\r[==============\ ] 8300/33224 24%\r[==============\ ] 8400/33224 25%\r[===============\ ] 8500/33224 25%\r[===============\ ] 8600/33224 25%\r[===============\ ] 8700/33224 26%\r[===============\ ] 8800/33224 26%\r[===============\ ] 8900/33224 26%\r[===============\ ] 9000/33224 27%\r[================| ] 9200/33224 27%\r[================| ] 9300/33224 27%\r[================/
] 9400/33224 28%\r[================/ ] 9500/33224 28%\r[=================/ ] 9600/33224 28%\r[=================/ ] 9700/33224 29%\r[=================/ ] 9800/33224 29%\r[=================/ ] 9900/33224 29%\r[=================/ ] 10000/33224 30%\r[=================/ ] 10100/33224 30%\r[==================/ ] 10200/33224 30%\r[==================/ ] 10300/33224 31%\r[==================/ ] 10400/33224 31%\r[==================/ ] 10500/33224 31%\r[==================/
] 10600/33224 31%\r[===================/ ] 10700/33224 32%\r[===================- ] \010800/33224 32%\r[===================- ] 10900/33224 32%\r[===================- ] 11000/33224 33%\r[===================- ] 11100/33224 33%\r[===================- ] 11200/33224 33%\r[====================- ] 11300/33224 34%\r[====================- ] 11400/33224 34%\r[====================- ] 11500/33224 34%\r[====================- ] 11600/33224 34%\r[====================- ] 11700/33224 35%\r[====================- ] 11800/33224 35%\r[===============
======- ] 12000/33224 36%\r[=====================- ] 12100/33224 36%\r[=====================- ] 12300/33224 37%\r[======================- ] 12400/33224 37%\r[======================\ ] 12500/33224 37%\r[======================\ ] 12600/33224 37%\r[======================\ ] 12700/33224 38%\r[======================\ ] 12800/33224 38%\r[======================\ ] 12900/33224 38%\r[=======================\ ] 13000/33224 39%\r[=======================\ ] 13100/33224 39%\r[=======================\ ] 13200/33224 39%\r[=======================\
] 13300/33224 40%\r[=======================\ ] 13400/33224 40%\r[========================\ ] 13600/33224 40%\r[========================\ \0 ] 13700/33224 41%\r[========================\ ] 13900/33224 41%\r[========================\ ] 14000/33224 42%\r[=========================\ ] 14100/33224 42%\r[=========================/ ] 14200/33224 42%\r[=========================| ] 14300/33224 43%\r[=========================\ ] 14400/33224 43%\r[==========================/ ] 15100/33224 45%\r[==========================/ ] 15200/33224 45%\r[===========================/ ] 15300/33224 46%\r[========
===================/ ] 15400/33224 46%\r[===========================/ ] 15500/33224 46%\r[===========================/ ] 15600/33224 46%\r[============================\ ] 15900/33224 47%\r[============================- ] 16300/33224 49%\r[=============================\ ] 16500/33224 49%\r[=============================\ ] 16600/33224 49%\r[=============================\ ] 16700/33224 50%\r[=============================\ ] 16800/33224 50%\r[==============================\ ] 17000/33224 51%\r[==============================\ ] 17100/33224 51%\r[==============================\ ] 17200/33224 51%\r[==============================\
] 17300/33224 52%\r[==============================\ ] 17400/33224 52%\r[===============================| ] 17600/33224 52%\r[===============================| ] 17800/33224 53%\0\r[===============================/ ] 17900/33224 53%\r[===============================/ ] 18000/33224 54%\r[================================| ] 18300/33224 55%\r[================================| ] 18400/33224 55%\r[================================/ ] 18500/33224 55%\r[=================================/ ] 18600/33224 55%\r[=================================/ ] 18700/33224 56%\r[=================================/ ] 18800/33224 56%\r[=================================/ ] 18900/33224 56%\r[=
================================/ ] 19000/33224 57%\r[=================================/ ] 19100/33224 57%\r[==================================/ ] 19200/33224 57%\r[==================================/ ] 19400/33224 58%\r[===================================/ ] 19800/33224 59%\r[===================================- ] 19900/33224 59%\r[====================================\ ] 20400/33224 61%\r[====================================\ ] 20600/33224 62%\r[====================================\ ] 20700/33224 62%\r[====================================\ ] 20800/33224 62%\r[=====================================- ] 21000/33224 63%\r[=====================================| ] 21100/33224 63%\r[======================================
\ ] 21500/33224 64%\r[======================================\ ] 21600/33224 65%\r[======================================\ ] 21700/33224 65%\r[=======================================\ ] 22000/33224 66%\r[=======================================\ \0 ] 22100/33224 66%\r[=======================================| ] 22200/33224 66%\r[=======================================| ] 22300/33224 67%\r[=======================================| ] 22400/33224 67%\r[=======================================| ] 22500/33224 67%\r[========================================| ] 22600/33224 68%\r[========================================| ] 22700/33224 68%\r[========================================| ] 22800/33224 68%\r[========================================\ ] 22900/33224
68%\r[========================================\ ] 23000/33224 69%\r[=========================================\ ] 23200/33224 69%\r[=========================================\ ] 23300/33224 70%\r[=========================================| ] 23400/33224 70%\r[==========================================| ] 23800/33224 71%\r[============================================| ] 24800/33224 74%\r[============================================| ] 24900/33224 74%\r[============================================/ ] 25000/33224 75%\r[============================================/ ] 25100/33224 75%\r[============================================/ ] 25200/33224 75%\r[============================================/ ] 25300/33224 76%\r[=============================================/ ] 25400/33224 76%\r[===============================
==============/ ] 25500/33224 76%\r[=============================================/ ] 25600/33224 77%\r[=============================================/ ] 25700/33224 77%\r[=============================================/ ] 25800/33224 77%\r[=============================================/ ] 25900/33224 77%\r[==============\0================================/ ] 26000/33224 78%\r[==============================================/ ] 26100/33224 78%\r[==============================================/ ] 26200/33224 78%\r[==============================================/ ] 26300/33224 79%\r[==============================================/ ] 26400/33224 79%\r[===============================================/ ] 26500/33224 79%\r[===============================================/ ] 26600/33224 80%\r[===============================================/ ] 26700
/33224 80%\r[===============================================/ ] 26800/33224 80%\r[===============================================/ ] 26900/33224 80%\r[===============================================/ ] 27000/33224 81%\r[================================================/ ] 27100/33224 81%\r[================================================/ ] 27200/33224 81%\r[================================================/ ] 27300/33224 82%\r[================================================/ ] 27400/33224 82%\r[================================================/ ] 27500/33224 82%\r[=================================================/ ] 27600/33224 83%\r[=================================================/ ] 27700/33224 83%\r[=================================================- ] 28000/33224 84%\r[=================================================- ] 28100/33224 84%\r[========================
==========================- ] 28200/33224 84%\r[==================================================- ] 28300/33224 85%\r[==================================================- ] 28400/33224 85%\r[==================================================- ] 28500/33224 85%\r[==================================================- ] 28600/33224 86%\r[==================================================- ] \028700/33224 86%\r[===================================================- ] 28800/33224 86%\r[===================================================- ] 28900/33224 86%\r[===================================================- ] 29000/33224 87%\r[===================================================- ] 29100/33224 87%\r[===================================================- ] 29200/33224 87%\r[====================================================- ] 29300/33224 88%\r[====================================================-
] 29400/33224 88%\r[====================================================- ] 29500/33224 88%\r[====================================================- ] 29600/33224 89%\r[====================================================- ] 29700/33224 89%\r[====================================================- ] 29800/33224 89%\r[=====================================================- ] 29900/33224 89%\r[=====================================================- ] 30000/33224 90%\r[=====================================================- ] 30100/33224 90%\r[=====================================================\ ] 30200/33224 90%\r[=====================================================\ ] 30300/33224 91%\r[=====================================================\ ] 30400/33224 91%\r[======================================================\ ] 30500/33224 91%\r[======================================================\ ] 30600/33224 92%\r[=================
=====================================\ ] 30700/33224 92%\r[======================================================\ ] 30800/33224 92%\r[======================================================\ ] 30900/33224 93%\r[=======================================================\ ] 31000/33224 93%\r[=======================================================\ ] 31100/33224 93%\r[=======================================================\ ] 31200/33224 93%\r[==============================\0=========================\ ] 31300/33224 94%\r[=======================================================\ ] 31400/33224 94%\r[========================================================| ] 31800/33224 95%\r[=========================================================| ] 32100/33224 96%\r[=========================================================| ] 32200/33224 96%\r[=========================================================| ] 32300/33224 97%\r[=====================================================
====| ] 32400/33224 97%\r[=========================================================| ] 32500/33224 97%\r[=========================================================| ] 32600/33224 98%\r[==========================================================| ] 32700/33224 98%\r[==========================================================| ] 32800/33224 98%\r[==========================================================| ] 32900/33224 99%\r[==========================================================| ] 33000/33224 99%\r[==========================================================| ] 33100/33224 99%\r[==========================================================| ] 33200/33224 99%\r[===========================================================|] 33224/33224 100%
Exportable Squashfs 4.0 filesystem, gzip compressed, data block size 131072
compressed data, compressed metadata, compressed fragments, no xattrs
duplicates are removed
Filesystem size 166894.28 Kbytes (162.98 Mbytes)
25.07% of uncompressed filesystem size (665736.43 Kbytes)
Inode table size 340681 bytes (332.70 Kbytes)
28.41% of uncompressed inode table size (1199068 bytes)
Directory table size 324985 bytes (317.37 Kbytes)
44.29% of uncompressed directory table size (733719 bytes)
Number of duplicate files found 4091
Number of inodes 35371
Number of files 30039
Number of fragments 1806
Number of symbolic links 2661
Number of device nodes 271
Number of fifo nodes 0
Number of socket nodes 0
Number of directories 2400
Number of ids (unique uids + gids) 12
Number of uids 4
root (0)
man (13)
nobody (65534)
ntp (123)
Number of gids 10
root (0)
disk (6)
kmem (9)
tty (5)
unknown (248)
wheel (10)
utmp (406)
unknown (249)
portage (250)
ntp (123)
--- Running action sequence: setup_overlay
--- Running action sequence: create_iso
17500+0 records in
17500+0 records out
17920000 bytes (18 MB) copied, 0.108575 s, 165 MB/s
mkfs.fat 3.0.26 (2014-03-07)
>> Populating EFI image...
'/home/catalyst/builds/default/livecd-stage2-ia64-20140624//boot/System-gentoo.map' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140624//gentoo.efimg.mountPoint/System-gentoo.map'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140624//boot/efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140624//gentoo.efimg.mountPoint/efi'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140624//boot/efi/boot' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140624//gentoo.efimg.mountPoint/efi/boot'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140624//boot/efi/boot/gentoo.igz' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140624//gentoo.efimg.mountPoint/efi/boot/gentoo.igz'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140624//boot/efi/boot/bootia64.efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140624//gentoo.efimg.mountPoint/efi/boot/bootia64.efi'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140624//boot/efi/boot/elilo.msg' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140624//gentoo.efimg.mountPoint/efi/boot/elilo.msg'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140624//boot/efi/boot/gentoo' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140624//gentoo.efimg.mountPoint/efi/boot/gentoo'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140624//boot/efi/boot/elilo.conf' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140624//gentoo.efimg.mountPoint/efi/boot/elilo.conf'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140624//boot/elilo.conf' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140624//gentoo.efimg.mountPoint/elilo.conf'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140624//boot/elilo.efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140624//gentoo.efimg.mountPoint/elilo.efi'
>> Removing /boot...
>> Running mkisofs to create iso image....
>> mkisofs -R -l -b gentoo.efimg -c boot.cat -no-emul-boot -J -V "Gentoo Linux IA64 20140624" -o /var/tmp/catalyst/builds/default/install-ia64-minimal-20140624.iso /home/catalyst/builds/default/livecd-stage2-ia64-20140624/
mkisofs: No such file or directory. Unable to open disc image file '/var/tmp/catalyst/builds/default/install-ia64-minimal-20140624.iso'.
Cannot make ISO image
!!! catalyst: ISO creation script failed.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1377, in create_iso
env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/livecd-stage2-ia64-20140624/.catalyst_lock'
Full build log at /tmp/catalyst-auto.24066/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2014-06-17 12:37 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2014-06-17 12:37 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
livecd: removing /usr/lib*/perl5/site_perl
livecd: removing /usr/lib*/gcc-lib/*/*/libgcj*
livecd: removing /usr/sbin/archive-conf
livecd: removing /usr/sbin/dispatch-conf
livecd: removing /usr/sbin/emaint
livecd: removing /usr/sbin/emerge-webrsync
livecd: removing /usr/sbin/env-update
livecd: removing /usr/sbin/fb*
livecd: removing /usr/sbin/fixpackages
livecd: removing /usr/sbin/quickpkg
livecd: removing /usr/sbin/regenworld
livecd: removing /usr/share/consolefonts/1*
livecd: removing /usr/share/consolefonts/7*
livecd: removing /usr/share/consolefonts/8*
livecd: removing /usr/share/consolefonts/9*
livecd: removing /usr/share/consolefonts/A*
livecd: removing /usr/share/consolefonts/C*
livecd: removing /usr/share/consolefonts/E*
livecd: removing /usr/share/consolefonts/G*
livecd: removing /usr/share/consolefonts/L*
livecd: removing /usr/share/consolefonts/M*
livecd: removing /usr/share/consolefonts/R*
livecd: removing /usr/share/consolefonts/a*
livecd: removing /usr/share/consolefonts/c*
livecd: removing /usr/share/consolefonts/dr*
livecd: removing /usr/share/consolefonts/g*
livecd: removing /usr/share/consolefonts/i*
livecd: removing /usr/share/consolefonts/k*
livecd: removing /usr/share/consolefonts/l*
livecd: removing /usr/share/consolefonts/r*
livecd: removing /usr/share/consolefonts/s*
livecd: removing /usr/share/consolefonts/t*
livecd: removing /usr/share/consolefonts/v*
livecd: removing /usr/share/misc/*.old
--- Running action sequence: empty
Emptying directory /etc/cron.daily
/etc/cron.hourly not a directory or does not exist, skipping 'empty' operation.
/etc/cron.monthly not a directory or does not exist, skipping 'empty' operation.
/etc/cron.weekly not a directory or does not exist, skipping 'empty' operation.
Emptying directory /etc/logrotate.d
/etc/modules.autoload.d not a directory or does not exist, skipping 'empty' operation.
/etc/runlevels/single not a directory or does not exist, skipping 'empty' operation.
Emptying directory /etc/skel
/lib/dev-state not a directory or does not exist, skipping 'empty' operation.
/lib/udev-state not a directory or does not exist, skipping 'empty' operation.
/lib64/dev-state not a directory or does not exist, skipping 'empty' operation.
/lib64/udev-state not a directory or does not exist, skipping 'empty' operation.
/root/.ccache not a directory or does not exist, skipping 'empty' operation.
Emptying directory /tmp
/usr/diet/include not a directory or does not exist, skipping 'empty' operation.
/usr/diet/man not a directory or does not exist, skipping 'empty' operation.
/usr/i386-gentoo-linux-uclibc not a directory or does not exist, skipping 'empty' operation.
/usr/i386-pc-linux-gnu not a directory or does not exist, skipping 'empty' operation.
/usr/i386-pc-linux-uclibc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/config not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/doc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/etc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/awk not a directory or does not exist, skipping 'empty' operation.
/usr/lib/ccache not a directory or does not exist, skipping 'empty' operation.
/usr/lib/gcc-config not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/lib/gconv
Emptying directory /usr/lib/nfs
/usr/lib/perl5/site_perl not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/lib/portage
/usr/lib/python2.2 not a directory or does not exist, skipping 'empty' operation.
/usr/lib/python2.3 not a directory or does not exist, skipping 'empty' operation.
/usr/lib/python2.4/test not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/config not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/doc not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/etc not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/awk not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/ccache not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/gcc-config not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/gconv not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/nfs not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/perl5/site_perl not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/portage not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.2 not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.3 not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.4/test not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/local
Emptying directory /usr/portage
/usr/powerpc-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
/usr/powerpc64-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/aclocal
Emptying directory /usr/share/baselayout
/usr/share/binutils-data not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/consolefonts/partialfonts
Emptying directory /usr/share/consoletrans
Emptying directory /usr/share/dict
Emptying directory /usr/share/doc
/usr/share/emacs not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/et
Emptying directory /usr/share/gcc-data
/usr/share/genkernel not a directory or does not exist, skipping 'empty' operation.
/usr/share/gettext not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/glib-2.0
/usr/share/gnuconfig not a directory or does not exist, skipping 'empty' operation.
/usr/share/gtk-doc not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/i18n
Emptying directory /usr/share/info
/usr/share/lcms not a directory or does not exist, skipping 'empty' operation.
/usr/share/libtool not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/locale
Emptying directory /usr/share/man
/usr/share/rfc not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/ss
/usr/share/state not a directory or does not exist, skipping 'empty' operation.
/usr/share/texinfo not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/unimaps
Emptying directory /usr/share/zoneinfo
/usr/sparc-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/src
/usr/x86_64-pc-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /var/cache
Emptying directory /var/empty
Emptying directory /var/lib/portage
Emptying directory /var/log
Emptying directory /var/spool
/var/state not a directory or does not exist, skipping 'empty' operation.
Emptying directory /var/tmp
--- Running action sequence: target_setup
Setting up filesystems per filesystem type
Creating squashfs...
Parallel mksquashfs: Using 4 processors
Creating 4.0 filesystem on /home/catalyst/builds/default/livecd-stage2-ia64-20140617//image.squashfs, block size 131072.
\r[\ ] 300/33224 0%\r[\ ] 400/33224 1%\r[=| ] 600/33224 1%\r[=| ] 700/33224 2%\r[=| ] 800/33224 2%\r[==| ] 1600/33224 4%\r[===| ] 2000/33224 6%\r[====/ ] 2600/33224 7%\r[====| ] 2700/33224 8%\r[=====\ ] 2900/33224 8%\r[======/ ] 3900/33224 11%\r[=======/ ] 4000/33224 12%\r[=======/
] 4100/33224 12%\r[=======/ ] 4200/33224 12%\r[=======/ ] 4300/33224 12%\r[=======/ ] 4400/33224 13%\r[=======/ ] 4500/33224 13%\r[========/ ] 4600/33224 13%\r[========/ ] 4700/33224 14%\r[========/ ] 4800/33224 14%\r[========/ ] 4900/33224 14%\r[========/ ] 5000/33224 15%\r[=========/ ] 5100/33224 15%\r[=========/ ] 5200/33224 15%\r[=========- ] 5300/33224
15%\r[==========- \0 ] 6000/33224 18%\r[==========- ] 6100/33224 18%\r[===========- ] 6200/33224 18%\r[===========- ] 6300/33224 18%\r[===========- ] 6400/33224 19%\r[===========\ ] 6500/33224 19%\r[===========\ ] 6600/33224 19%\r[===========\ ] 6700/33224 20%\r[============\ ] 6800/33224 20%\r[============\ ] 6900/33224 20%\r[============\ ] 7000/33224 21%\r[============\ ] 7200/33224 21%\r[============\
] 7300/33224 21%\r[=============\ ] 7400/33224 22%\r[=============\ ] 7500/33224 22%\r[=============\ ] 7600/33224 22%\r[=============| ] 7700/33224 23%\r[=============| ] 7800/33224 23%\r[==============| ] 7900/33224 23%\r[==============| ] 8000/33224 24%\r[==============| ] 8100/33224 24%\r[==============| ] 8200/33224 24%\r[==============| ] 8300/33224 24%\r[==============| ] 8400/33224 25%\r[===============| ] 850
0/33224 25%\r[===============| ] 8700/33224 26%\r[==============\0=| ] 8900/33224 26%\r[================/ ] 9200/33224 27%\r[================- ] 9500/33224 28%\r[=================- ] 9900/33224 29%\r[=================- ] 10000/33224 30%\r[=================- ] 10100/33224 30%\r[==================- ] 10400/33224 31%\r[==================- ] 10600/33224 31%\r[====================\ ] 11600/33224 34%\r[====================\ ] 11700/33224 35%\r[====================\ ] 11800/33224 35%\r[=====================\
] 11900/33224 35%\r[=====================\ ] 12000/33224 36%\r[=====================\ ] 12100/33224 36%\r[=====================\ ] 12200/33224 36%\r[=====================\ ] 12300/33224 37%\r[======================\ ] 12400/33224 37%\r[======================\ ] 12500/33224 37%\r[======================\ ] 12600/33224 37%\r[======================\ ] 12700/33224 38%\r[======================\ ] 12800/33224 38%\r[======================\ ] 12900/33224 38%\r[=======================\ ] 13000/33224 39%\r[=======================\
] 13100/33224 39%\r[=======================| ] 13200/33224 39%\r[=======================| ] \013300/33224 40%\r[=======================| ] 13400/33224 40%\r[========================| ] 13600/33224 40%\r[========================| ] 13700/33224 41%\r[========================| ] 13800/33224 41%\r[========================| ] 13900/33224 41%\r[========================| ] 14000/33224 42%\r[=========================/ ] 14200/33224 42%\r[=========================\ ] 14400/33224 43%\r[==========================/ ] 15100/33224 45%\r[==========================/ ] 15200/33224 45%\r[===============
============/ ] 15300/33224 46%\r[===========================/ ] 15400/33224 46%\r[===========================/ ] 15500/33224 46%\r[===========================/ ] 15600/33224 46%\r[===========================- ] 15700/33224 47%\r[============================\ ] 15800/33224 47%\r[============================\ ] 15900/33224 47%\r[============================- ] 16200/33224 48%\r[============================- ] 16300/33224 49%\r[=============================\ ] 16400/33224 49%\r[=============================\ ] 16500/33224 49%\r[=============================\ ] 16600/33224 49%\r[=============================\
] 16700/33224 50%\r[=============================\ ] 16800/33224 50%\r[==============================\ ] 16900/33224 50%\r[==============================\0\ ] 17000/33224 51%\r[==============================\ ] 17100/33224 51%\r[==============================\ ] 17200/33224 51%\r[==============================\ ] 17300/33224 52%\r[==============================\ ] 17400/33224 52%\r[===============================| ] 17600/33224 52%\r[===============================| ] 17700/33224 53%\r[===============================| ] 17800/33224 53%\r[===============================| ] 18000/33224 54%\r[================================/ ] 18100/33224 54%\r[========
========================| ] 18200/33224 54%\r[================================| ] 18300/33224 55%\r[================================| ] 18400/33224 55%\r[================================| ] 18500/33224 55%\r[=================================/ ] 18600/33224 55%\r[=================================/ ] 18700/33224 56%\r[=================================/ ] 18900/33224 56%\r[=================================/ ] 19000/33224 57%\r[=================================/ ] 19100/33224 57%\r[==================================/ ] 19200/33224 57%\r[==================================/ ] 19400/33224 58%\r[==================================/ ] 19500/33224 58%\r[==================================-
] 19600/33224 58%\r[==================================/ ] 19700/33224 59%\r[===================================/ ] 19800/33224 59%\r[===================================/ ] 19900/33224 59%\0\r[===================================- ] 20100/33224 60%\r[===================================- ] 20200/33224 60%\r[====================================\ ] 20600/33224 62%\r[====================================\ ] 20700/33224 62%\r[====================================\ ] 20800/33224 62%\r[======================================\ ] 21500/33224 64%\r[======================================\ ] 21600/33224 65%\r[======================================\ ] 21700/33224 65%\r[=======================================\ ] 22100/33224 66%\r[=
======================================\ ] 22200/33224 66%\r[=======================================| ] 22300/33224 67%\r[=======================================| ] 22500/33224 67%\r[========================================- ] 22900/33224 68%\r[=========================================\ ] 23100/33224 69%\r[=========================================\ ] 23200/33224 69%\r[=========================================\ ] 23300/33224 70%\r[=========================================| ] 23400/33224 70%\r[=========================================| ] 23500/33224 70%\r[=========================================| ] 23600/33224 71%\r[==========================================| ] 23700/33224 71%\r[==========================================| ] 23800/33224 71%\r[======================================
====| ] 23900/33224 71%\r[==========================================| ] 24000/33224 72%\r[==========================================| ] 24100/33224 72%\r[==========================================| ] 24200/33224 72%\r[===========================================| \0 ] 24400/33224 73%\r[===========================================| ] 24600/33224 74%\r[===========================================| ] 24700/33224 74%\r[============================================| ] 24900/33224 74%\r[============================================| ] 25000/33224 75%\r[============================================| ] 25100/33224 75%\r[============================================| ] 25200/33224 75%\r[============================================| ] 25300/33224 76%\r[=============================================| ] 25400/33224
76%\r[=============================================/ ] 25500/33224 76%\r[=============================================/ ] 25600/33224 77%\r[=============================================/ ] 25700/33224 77%\r[=============================================/ ] 25800/33224 77%\r[=============================================/ ] 25900/33224 77%\r[==============================================/ ] 26000/33224 78%\r[==============================================/ ] 26100/33224 78%\r[==============================================/ ] 26200/33224 78%\r[==============================================/ ] 26300/33224 79%\r[==============================================/ ] 26400/33224 79%\r[===============================================/ ] 26500/33224 79%\r[===============================================/ ] 26600/33224 80%\r[===============================
================/ ] 26700/33224 80%\r[===============================================/ ] 26800/33224 80%\r[================================================/ ] 27100/33224 81%\r[================================================/ ] 27200/33224 81%\r[================================================/ ] 27300/33224 82%\r[==============\0==================================/ ] 27400/33224 82%\r[================================================/ ] 27500/33224 82%\r[=================================================/ ] 27600/33224 83%\r[=================================================- ] 27800/33224 83%\r[==================================================- ] 28500/33224 85%\r[===================================================- ] 28800/33224 86%\r[===================================================- ] 29000/33224 87%\r[===================================================- ] 29200
/33224 87%\r[====================================================- ] 29300/33224 88%\r[====================================================- ] 29600/33224 89%\r[====================================================- ] 29800/33224 89%\r[=====================================================- ] 29900/33224 89%\r[=====================================================- ] 30000/33224 90%\r[=====================================================- ] 30300/33224 91%\r[=====================================================- ] 30400/33224 91%\r[======================================================- ] 30500/33224 91%\r[======================================================- ] 30600/33224 92%\r[======================================================- ] 30800/33224 92%\r[=======================================================- ] 31100/33224 93%\r[=======================================================- ] 31200/33224 93%\r[========================
===============================\ ] 31300/33224 94%\r[=======================================================\ ] 31400/33224 94%\r[========================================================\ ] 31800/33224 95%\r[=========================================================| ] 32100/33224 96%\r[=========================================================| ] 32200/33224 96%\r[=========================================================| ] \032300/33224 97%\r[=========================================================| ] 32400/33224 97%\r[=========================================================| ] 32500/33224 97%\r[=========================================================| ] 32600/33224 98%\r[==========================================================| ] 32700/33224 98%\r[==========================================================| ] 32800/33224 98%\r[==========================================================| ] 32900/33224 99%\r[==========================================================|
] 33000/33224 99%\r[==========================================================| ] 33100/33224 99%\r[==========================================================| ] 33200/33224 99%\r[===========================================================|] 33224/33224 100%
Exportable Squashfs 4.0 filesystem, gzip compressed, data block size 131072
compressed data, compressed metadata, compressed fragments, no xattrs
duplicates are removed
Filesystem size 166879.45 Kbytes (162.97 Mbytes)
25.07% of uncompressed filesystem size (665676.73 Kbytes)
Inode table size 340800 bytes (332.81 Kbytes)
28.42% of uncompressed inode table size (1199036 bytes)
Directory table size 324954 bytes (317.34 Kbytes)
44.29% of uncompressed directory table size (733704 bytes)
Number of duplicate files found 4091
Number of inodes 35370
Number of files 30039
Number of fragments 1805
Number of symbolic links 2661
Number of device nodes 271
Number of fifo nodes 0
Number of socket nodes 0
Number of directories 2399
Number of ids (unique uids + gids) 12
Number of uids 4
root (0)
man (13)
nobody (65534)
ntp (123)
Number of gids 10
root (0)
disk (6)
kmem (9)
tty (5)
unknown (248)
wheel (10)
utmp (406)
unknown (249)
portage (250)
ntp (123)
--- Running action sequence: setup_overlay
--- Running action sequence: create_iso
17500+0 records in
17500+0 records out
17920000 bytes (18 MB) copied, 0.108794 s, 165 MB/s
mkfs.fat 3.0.26 (2014-03-07)
>> Populating EFI image...
'/home/catalyst/builds/default/livecd-stage2-ia64-20140617//boot/System-gentoo.map' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140617//gentoo.efimg.mountPoint/System-gentoo.map'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140617//boot/efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140617//gentoo.efimg.mountPoint/efi'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140617//boot/efi/boot' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140617//gentoo.efimg.mountPoint/efi/boot'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140617//boot/efi/boot/gentoo.igz' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140617//gentoo.efimg.mountPoint/efi/boot/gentoo.igz'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140617//boot/efi/boot/bootia64.efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140617//gentoo.efimg.mountPoint/efi/boot/bootia64.efi'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140617//boot/efi/boot/elilo.msg' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140617//gentoo.efimg.mountPoint/efi/boot/elilo.msg'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140617//boot/efi/boot/gentoo' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140617//gentoo.efimg.mountPoint/efi/boot/gentoo'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140617//boot/efi/boot/elilo.conf' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140617//gentoo.efimg.mountPoint/efi/boot/elilo.conf'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140617//boot/elilo.conf' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140617//gentoo.efimg.mountPoint/elilo.conf'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140617//boot/elilo.efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140617//gentoo.efimg.mountPoint/elilo.efi'
>> Removing /boot...
>> Running mkisofs to create iso image....
>> mkisofs -R -l -b gentoo.efimg -c boot.cat -no-emul-boot -J -V "Gentoo Linux IA64 20140617" -o /var/tmp/catalyst/builds/default/install-ia64-minimal-20140617.iso /home/catalyst/builds/default/livecd-stage2-ia64-20140617/
mkisofs: No such file or directory. Unable to open disc image file '/var/tmp/catalyst/builds/default/install-ia64-minimal-20140617.iso'.
Cannot make ISO image
!!! catalyst: ISO creation script failed.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1377, in create_iso
env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/livecd-stage2-ia64-20140617/.catalyst_lock'
Full build log at /tmp/catalyst-auto.32371/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2014-06-10 13:08 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2014-06-10 13:08 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
livecd: removing /usr/lib*/perl5/site_perl
livecd: removing /usr/lib*/gcc-lib/*/*/libgcj*
livecd: removing /usr/sbin/archive-conf
livecd: removing /usr/sbin/dispatch-conf
livecd: removing /usr/sbin/emaint
livecd: removing /usr/sbin/emerge-webrsync
livecd: removing /usr/sbin/env-update
livecd: removing /usr/sbin/fb*
livecd: removing /usr/sbin/fixpackages
livecd: removing /usr/sbin/quickpkg
livecd: removing /usr/sbin/regenworld
livecd: removing /usr/share/consolefonts/1*
livecd: removing /usr/share/consolefonts/7*
livecd: removing /usr/share/consolefonts/8*
livecd: removing /usr/share/consolefonts/9*
livecd: removing /usr/share/consolefonts/A*
livecd: removing /usr/share/consolefonts/C*
livecd: removing /usr/share/consolefonts/E*
livecd: removing /usr/share/consolefonts/G*
livecd: removing /usr/share/consolefonts/L*
livecd: removing /usr/share/consolefonts/M*
livecd: removing /usr/share/consolefonts/R*
livecd: removing /usr/share/consolefonts/a*
livecd: removing /usr/share/consolefonts/c*
livecd: removing /usr/share/consolefonts/dr*
livecd: removing /usr/share/consolefonts/g*
livecd: removing /usr/share/consolefonts/i*
livecd: removing /usr/share/consolefonts/k*
livecd: removing /usr/share/consolefonts/l*
livecd: removing /usr/share/consolefonts/r*
livecd: removing /usr/share/consolefonts/s*
livecd: removing /usr/share/consolefonts/t*
livecd: removing /usr/share/consolefonts/v*
livecd: removing /usr/share/misc/*.old
--- Running action sequence: empty
Emptying directory /etc/cron.daily
/etc/cron.hourly not a directory or does not exist, skipping 'empty' operation.
/etc/cron.monthly not a directory or does not exist, skipping 'empty' operation.
/etc/cron.weekly not a directory or does not exist, skipping 'empty' operation.
Emptying directory /etc/logrotate.d
/etc/modules.autoload.d not a directory or does not exist, skipping 'empty' operation.
/etc/runlevels/single not a directory or does not exist, skipping 'empty' operation.
Emptying directory /etc/skel
/lib/dev-state not a directory or does not exist, skipping 'empty' operation.
/lib/udev-state not a directory or does not exist, skipping 'empty' operation.
/lib64/dev-state not a directory or does not exist, skipping 'empty' operation.
/lib64/udev-state not a directory or does not exist, skipping 'empty' operation.
/root/.ccache not a directory or does not exist, skipping 'empty' operation.
Emptying directory /tmp
/usr/diet/include not a directory or does not exist, skipping 'empty' operation.
/usr/diet/man not a directory or does not exist, skipping 'empty' operation.
/usr/i386-gentoo-linux-uclibc not a directory or does not exist, skipping 'empty' operation.
/usr/i386-pc-linux-gnu not a directory or does not exist, skipping 'empty' operation.
/usr/i386-pc-linux-uclibc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/config not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/doc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/etc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/awk not a directory or does not exist, skipping 'empty' operation.
/usr/lib/ccache not a directory or does not exist, skipping 'empty' operation.
/usr/lib/gcc-config not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/lib/gconv
Emptying directory /usr/lib/nfs
/usr/lib/perl5/site_perl not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/lib/portage
/usr/lib/python2.2 not a directory or does not exist, skipping 'empty' operation.
/usr/lib/python2.3 not a directory or does not exist, skipping 'empty' operation.
/usr/lib/python2.4/test not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/config not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/doc not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/etc not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/awk not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/ccache not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/gcc-config not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/gconv not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/nfs not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/perl5/site_perl not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/portage not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.2 not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.3 not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.4/test not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/local
Emptying directory /usr/portage
/usr/powerpc-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
/usr/powerpc64-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/aclocal
Emptying directory /usr/share/baselayout
/usr/share/binutils-data not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/consolefonts/partialfonts
Emptying directory /usr/share/consoletrans
Emptying directory /usr/share/dict
Emptying directory /usr/share/doc
/usr/share/emacs not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/et
Emptying directory /usr/share/gcc-data
/usr/share/genkernel not a directory or does not exist, skipping 'empty' operation.
/usr/share/gettext not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/glib-2.0
/usr/share/gnuconfig not a directory or does not exist, skipping 'empty' operation.
/usr/share/gtk-doc not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/i18n
Emptying directory /usr/share/info
/usr/share/lcms not a directory or does not exist, skipping 'empty' operation.
/usr/share/libtool not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/locale
Emptying directory /usr/share/man
/usr/share/rfc not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/ss
/usr/share/state not a directory or does not exist, skipping 'empty' operation.
/usr/share/texinfo not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/unimaps
Emptying directory /usr/share/zoneinfo
/usr/sparc-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/src
/usr/x86_64-pc-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /var/cache
Emptying directory /var/empty
Emptying directory /var/lib/portage
Emptying directory /var/log
Emptying directory /var/spool
/var/state not a directory or does not exist, skipping 'empty' operation.
Emptying directory /var/tmp
--- Running action sequence: target_setup
Setting up filesystems per filesystem type
Creating squashfs...
Parallel mksquashfs: Using 4 processors
Creating 4.0 filesystem on /home/catalyst/builds/default/livecd-stage2-ia64-20140610//image.squashfs, block size 131072.
\r[\ ] 200/33193 0%\r[\ ] 300/33193 0%\r[\ ] 400/33193 1%\r[=| ] 700/33193 2%\r[=| ] 800/33193 2%\r[=/ ] 1100/33193 3%\r[==\ ] 1300/33193 3%\r[==| ] 1600/33193 4%\r[===- ] 1900/33193 5%\r[====\ ] 2600/33193 7%\r[=====\ ] 2900/33193 8%\r[======| ] 3600/33193 10%\r[======|
] 3700/33193 11%\r[======| ] 3800/33193 11%\r[======/ ] 3900/33193 11%\r[=======/ ] 4000/33193 12%\r[=======/ ] 4100/33193 12%\r[=======/ ] 4200/33193 12%\r[=======/ ] 4300/33193 12%\r[=======/ ] 4400/33193 13%\r[=======/ ] 4500/33193 13%\r[========/ ] 4600/33193 13%\r[========/ ] 4700/33193 14%\r[=========/ ] 5100/33193 15%\r[=========/ ] 5300/33193
15%\r[=========- \0 ] 5500/33193 16%\r[==========- ] 5800/33193 17%\r[==========- ] 5900/33193 17%\r[==========- ] 6000/33193 18%\r[==========- ] 6100/33193 18%\r[===========- ] 6200/33193 18%\r[===========- ] 6300/33193 18%\r[===========- ] 6400/33193 19%\r[===========- ] 6500/33193 19%\r[===========- ] 6600/33193 19%\r[===========- ] 6700/33193 20%\r[============- ] 6800/33193 20%\r[============\
] 6900/33193 20%\r[============\ ] 7000/33193 21%\r[============\ ] 7100/33193 21%\r[============\ ] 7200/33193 21%\r[============\ ] 7300/33193 21%\r[=============\ ] 7400/33193 22%\r[=============\ ] 7500/33193 22%\r[=============\ ] 7600/33193 22%\r[=============\ ] 7700/33193 23%\r[=============\ ] 7800/33193 23%\r[==============\ ] 7900/33193 23%\r[==============\ ] 8000/33193 24%\r[==============\ ] 810
0/33193 24%\r[==============\ ] 8200/33193 24%\r[==============\0\ ] 8300/33193 25%\r[==============\ ] 8400/33193 25%\r[===============\ ] 8500/33193 25%\r[===============\ ] 8600/33193 25%\r[===============\ ] 8700/33193 26%\r[===============| ] 8800/33193 26%\r[===============| ] 8900/33193 26%\r[===============| ] 9000/33193 27%\r[================| ] 9300/33193 28%\r[================/ ] 9400/33193 28%\r[=================/ ] 9600/33193 28%\r[=================/
] 9700/33193 29%\r[=================/ ] 9800/33193 29%\r[=================/ ] 9900/33193 29%\r[=================/ ] 10000/33193 30%\r[=================/ ] 10100/33193 30%\r[==================/ ] 10200/33193 30%\r[==================/ ] 10300/33193 31%\r[==================/ ] 10400/33193 31%\r[==================/ ] 10500/33193 31%\r[==================/ ] 10600/33193 31%\r[===================/ ] 10800/33193 32%\r[===================- ] 10900/33193 32%\r[===================-
] 11000/33193 33%\r[===================- ] 11100/33193 33%\r[===================- ] \011200/33193 33%\r[====================- ] 11300/33193 34%\r[====================- ] 11400/33193 34%\r[====================- ] 11500/33193 34%\r[====================- ] 11600/33193 34%\r[====================- ] 11700/33193 35%\r[====================- ] 11800/33193 35%\r[=====================- ] 12000/33193 36%\r[=====================- ] 12300/33193 37%\r[======================- ] 12400/33193 37%\r[======================- ] 12500/33193 37%\r[===============
=======- ] 12600/33193 37%\r[======================\ ] 12700/33193 38%\r[======================\ ] 12800/33193 38%\r[======================\ ] 12900/33193 38%\r[=======================\ ] 13000/33193 39%\r[=======================\ ] 13100/33193 39%\r[=======================\ ] 13200/33193 39%\r[=======================\ ] 13300/33193 40%\r[=======================\ ] 13400/33193 40%\r[=======================\ ] 13500/33193 40%\r[========================\ ] 13600/33193 40%\r[========================\ ] 13800/33193 41%\r[========================\
] 13900/33193 41%\r[=========================/ ] 14200/33193 42%\r[=========================\ ] 14600/33193 43%\r[==========================/ \0 ] 15100/33193 45%\r[===========================/ ] 15200/33193 45%\r[===========================/ ] 15300/33193 46%\r[===========================/ ] 15400/33193 46%\r[===========================/ ] 15600/33193 46%\r[============================/ ] 16200/33193 48%\r[============================- ] 16300/33193 49%\r[=============================\ ] 16700/33193 50%\r[=============================\ ] 16800/33193 50%\r[==============================\ ] 16900/33193 50%\r[========
======================\ ] 17000/33193 51%\r[==============================\ ] 17100/33193 51%\r[==============================\ ] 17200/33193 51%\r[==============================\ ] 17400/33193 52%\r[===============================| ] 17500/33193 52%\r[===============================| ] 17700/33193 53%\r[===============================| ] 17800/33193 53%\r[===============================| ] 17900/33193 53%\r[===============================| ] 18000/33193 54%\r[================================/ ] 18100/33193 54%\r[================================| ] 18200/33193 54%\r[================================| ] 18300/33193 55%\r[================================|
] 18400/33193 55%\r[================================| ] 18500/33193 55%\r[=================================| ] 18600/33193 56%\r[=================================| ] 18700/33193 56%\0\r[=================================/ ] 18900/33193 56%\r[=================================/ ] 19000/33193 57%\r[=================================/ ] 19100/33193 57%\r[==================================/ ] 19200/33193 57%\r[==================================/ ] 19400/33193 58%\r[==================================/ ] 19500/33193 58%\r[===================================/ ] 19800/33193 59%\r[===================================/ ] 19900/33193 59%\r[===================================/ ] 20000/33193 60%\r[=
==================================- ] 20200/33193 60%\r[====================================\ ] 20600/33193 62%\r[====================================\ ] 20700/33193 62%\r[====================================\ ] 20800/33193 62%\r[=====================================| ] 20900/33193 62%\r[======================================\ ] 21500/33193 64%\r[======================================\ ] 21600/33193 65%\r[======================================\ ] 21700/33193 65%\r[======================================\ ] 21800/33193 65%\r[======================================\ ] 21900/33193 65%\r[=======================================\ ] 22000/33193 66%\r[=======================================\ ] 22100/33193 66%\r[======================================
==\ ] 22800/33193 68%\r[========================================- ] 23000/33193 69%\r[=========================================- ] 23100/33193 69%\r[==========================================\ ] 23700/33193 71%\r[==========================================\ \0 ] 23800/33193 71%\r[==========================================\ ] 23900/33193 72%\r[==========================================\ ] 24000/33193 72%\r[==========================================\ ] 24100/33193 72%\r[===========================================\ ] 24200/33193 72%\r[===========================================\ ] 24300/33193 73%\r[===========================================\ ] 24500/33193 73%\r[===========================================\ ] 24700/33193 74%\r[============================================| ] 24900/33193
75%\r[============================================| ] 25000/33193 75%\r[============================================| ] 25100/33193 75%\r[============================================| ] 25200/33193 75%\r[============================================| ] 25300/33193 76%\r[=============================================| ] 25400/33193 76%\r[=============================================| ] 25500/33193 76%\r[=============================================| ] 25600/33193 77%\r[=============================================| ] 25700/33193 77%\r[=============================================| ] 25800/33193 77%\r[==============================================| ] 25900/33193 78%\r[==============================================| ] 26000/33193 78%\r[==============================================| ] 26100/33193 78%\r[===============================
===============| ] 26200/33193 78%\r[==============================================| ] 26300/33193 79%\r[==============================================| ] 26400/33193 79%\r[===============================================| ] 26500/33193 79%\r[===============================================| ] 26600/33193 80%\r[==============\0=================================| ] 26700/33193 80%\r[===============================================| ] 26800/33193 80%\r[===============================================| ] 26900/33193 81%\r[===============================================| ] 27000/33193 81%\r[================================================/ ] 27100/33193 81%\r[================================================/ ] 27400/33193 82%\r[================================================/ ] 27500/33193 82%\r[=================================================/ ] 27900
/33193 84%\r[=================================================/ ] 28000/33193 84%\r[=================================================/ ] 28100/33193 84%\r[==================================================/ ] 28200/33193 84%\r[==================================================/ ] 28300/33193 85%\r[==================================================/ ] 28400/33193 85%\r[==================================================/ ] 28500/33193 85%\r[==================================================/ ] 28600/33193 86%\r[===================================================/ ] 28700/33193 86%\r[===================================================/ ] 28900/33193 87%\r[===================================================- ] 29100/33193 87%\r[===================================================- ] 29200/33193 87%\r[====================================================- ] 29300/33193 88%\r[========================
============================- ] 29500/33193 88%\r[====================================================- ] 29800/33193 89%\r[=====================================================- ] 29900/33193 90%\r[=====================================================- ] 30000/33193 90%\r[=====================================================- ] 30100/33193 90%\r[=====================================================- ] \030200/33193 90%\r[======================================================- ] 30400/33193 91%\r[======================================================- ] 30500/33193 91%\r[======================================================- ] 30600/33193 92%\r[======================================================- ] 30700/33193 92%\r[======================================================- ] 30900/33193 93%\r[=======================================================- ] 31300/33193 94%\r[=======================================================-
] 31400/33193 94%\r[=======================================================- ] 31500/33193 94%\r[=========================================================| ] 32600/33193 98%\r[==========================================================| ] 32700/33193 98%\r[==========================================================| ] 32800/33193 98%\r[==========================================================| ] 32900/33193 99%\r[==========================================================| ] 33000/33193 99%\r[==========================================================| ] 33100/33193 99%\r[===========================================================|] 33193/33193 100%
Exportable Squashfs 4.0 filesystem, gzip compressed, data block size 131072
compressed data, compressed metadata, compressed fragments, no xattrs
duplicates are removed
Filesystem size 166534.37 Kbytes (162.63 Mbytes)
25.07% of uncompressed filesystem size (664161.47 Kbytes)
Inode table size 340829 bytes (332.84 Kbytes)
28.44% of uncompressed inode table size (1198379 bytes)
Directory table size 324590 bytes (316.98 Kbytes)
44.27% of uncompressed directory table size (733142 bytes)
Number of duplicate files found 4072
Number of inodes 35350
Number of files 30018
Number of fragments 1804
Number of symbolic links 2663
Number of device nodes 271
Number of fifo nodes 0
Number of socket nodes 0
Number of directories 2398
Number of ids (unique uids + gids) 12
Number of uids 4
root (0)
man (13)
nobody (65534)
ntp (123)
Number of gids 10
root (0)
disk (6)
kmem (9)
tty (5)
unknown (248)
wheel (10)
utmp (406)
unknown (249)
portage (250)
ntp (123)
--- Running action sequence: setup_overlay
--- Running action sequence: create_iso
17500+0 records in
17500+0 records out
17920000 bytes (18 MB) copied, 0.109075 s, 164 MB/s
mkfs.fat 3.0.26 (2014-03-07)
>> Populating EFI image...
'/home/catalyst/builds/default/livecd-stage2-ia64-20140610//boot/System-gentoo.map' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140610//gentoo.efimg.mountPoint/System-gentoo.map'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140610//boot/efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140610//gentoo.efimg.mountPoint/efi'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140610//boot/efi/boot' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140610//gentoo.efimg.mountPoint/efi/boot'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140610//boot/efi/boot/gentoo.igz' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140610//gentoo.efimg.mountPoint/efi/boot/gentoo.igz'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140610//boot/efi/boot/bootia64.efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140610//gentoo.efimg.mountPoint/efi/boot/bootia64.efi'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140610//boot/efi/boot/elilo.msg' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140610//gentoo.efimg.mountPoint/efi/boot/elilo.msg'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140610//boot/efi/boot/gentoo' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140610//gentoo.efimg.mountPoint/efi/boot/gentoo'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140610//boot/efi/boot/elilo.conf' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140610//gentoo.efimg.mountPoint/efi/boot/elilo.conf'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140610//boot/elilo.conf' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140610//gentoo.efimg.mountPoint/elilo.conf'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140610//boot/elilo.efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140610//gentoo.efimg.mountPoint/elilo.efi'
>> Removing /boot...
>> Running mkisofs to create iso image....
>> mkisofs -R -l -b gentoo.efimg -c boot.cat -no-emul-boot -J -V "Gentoo Linux IA64 20140610" -o /var/tmp/catalyst/builds/default/install-ia64-minimal-20140610.iso /home/catalyst/builds/default/livecd-stage2-ia64-20140610/
mkisofs: No such file or directory. Unable to open disc image file '/var/tmp/catalyst/builds/default/install-ia64-minimal-20140610.iso'.
Cannot make ISO image
!!! catalyst: ISO creation script failed.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1377, in create_iso
env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/livecd-stage2-ia64-20140610/.catalyst_lock'
Full build log at /tmp/catalyst-auto.19569/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2014-06-03 13:00 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2014-06-03 13:00 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
livecd: removing /usr/lib*/perl5/site_perl
livecd: removing /usr/lib*/gcc-lib/*/*/libgcj*
livecd: removing /usr/sbin/archive-conf
livecd: removing /usr/sbin/dispatch-conf
livecd: removing /usr/sbin/emaint
livecd: removing /usr/sbin/emerge-webrsync
livecd: removing /usr/sbin/env-update
livecd: removing /usr/sbin/fb*
livecd: removing /usr/sbin/fixpackages
livecd: removing /usr/sbin/quickpkg
livecd: removing /usr/sbin/regenworld
livecd: removing /usr/share/consolefonts/1*
livecd: removing /usr/share/consolefonts/7*
livecd: removing /usr/share/consolefonts/8*
livecd: removing /usr/share/consolefonts/9*
livecd: removing /usr/share/consolefonts/A*
livecd: removing /usr/share/consolefonts/C*
livecd: removing /usr/share/consolefonts/E*
livecd: removing /usr/share/consolefonts/G*
livecd: removing /usr/share/consolefonts/L*
livecd: removing /usr/share/consolefonts/M*
livecd: removing /usr/share/consolefonts/R*
livecd: removing /usr/share/consolefonts/a*
livecd: removing /usr/share/consolefonts/c*
livecd: removing /usr/share/consolefonts/dr*
livecd: removing /usr/share/consolefonts/g*
livecd: removing /usr/share/consolefonts/i*
livecd: removing /usr/share/consolefonts/k*
livecd: removing /usr/share/consolefonts/l*
livecd: removing /usr/share/consolefonts/r*
livecd: removing /usr/share/consolefonts/s*
livecd: removing /usr/share/consolefonts/t*
livecd: removing /usr/share/consolefonts/v*
livecd: removing /usr/share/misc/*.old
--- Running action sequence: empty
Emptying directory /etc/cron.daily
/etc/cron.hourly not a directory or does not exist, skipping 'empty' operation.
/etc/cron.monthly not a directory or does not exist, skipping 'empty' operation.
/etc/cron.weekly not a directory or does not exist, skipping 'empty' operation.
Emptying directory /etc/logrotate.d
/etc/modules.autoload.d not a directory or does not exist, skipping 'empty' operation.
/etc/runlevels/single not a directory or does not exist, skipping 'empty' operation.
Emptying directory /etc/skel
/lib/dev-state not a directory or does not exist, skipping 'empty' operation.
/lib/udev-state not a directory or does not exist, skipping 'empty' operation.
/lib64/dev-state not a directory or does not exist, skipping 'empty' operation.
/lib64/udev-state not a directory or does not exist, skipping 'empty' operation.
/root/.ccache not a directory or does not exist, skipping 'empty' operation.
Emptying directory /tmp
/usr/diet/include not a directory or does not exist, skipping 'empty' operation.
/usr/diet/man not a directory or does not exist, skipping 'empty' operation.
/usr/i386-gentoo-linux-uclibc not a directory or does not exist, skipping 'empty' operation.
/usr/i386-pc-linux-gnu not a directory or does not exist, skipping 'empty' operation.
/usr/i386-pc-linux-uclibc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/config not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/doc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/etc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/awk not a directory or does not exist, skipping 'empty' operation.
/usr/lib/ccache not a directory or does not exist, skipping 'empty' operation.
/usr/lib/gcc-config not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/lib/gconv
Emptying directory /usr/lib/nfs
/usr/lib/perl5/site_perl not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/lib/portage
/usr/lib/python2.2 not a directory or does not exist, skipping 'empty' operation.
/usr/lib/python2.3 not a directory or does not exist, skipping 'empty' operation.
/usr/lib/python2.4/test not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/config not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/doc not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/etc not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/awk not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/ccache not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/gcc-config not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/gconv not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/nfs not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/perl5/site_perl not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/portage not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.2 not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.3 not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.4/test not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/local
Emptying directory /usr/portage
/usr/powerpc-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
/usr/powerpc64-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/aclocal
Emptying directory /usr/share/baselayout
/usr/share/binutils-data not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/consolefonts/partialfonts
Emptying directory /usr/share/consoletrans
Emptying directory /usr/share/dict
Emptying directory /usr/share/doc
/usr/share/emacs not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/et
Emptying directory /usr/share/gcc-data
/usr/share/genkernel not a directory or does not exist, skipping 'empty' operation.
/usr/share/gettext not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/glib-2.0
/usr/share/gnuconfig not a directory or does not exist, skipping 'empty' operation.
/usr/share/gtk-doc not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/i18n
Emptying directory /usr/share/info
/usr/share/lcms not a directory or does not exist, skipping 'empty' operation.
/usr/share/libtool not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/locale
Emptying directory /usr/share/man
/usr/share/rfc not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/ss
/usr/share/state not a directory or does not exist, skipping 'empty' operation.
/usr/share/texinfo not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/unimaps
Emptying directory /usr/share/zoneinfo
/usr/sparc-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/src
/usr/x86_64-pc-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /var/cache
Emptying directory /var/empty
Emptying directory /var/lib/portage
Emptying directory /var/log
Emptying directory /var/spool
/var/state not a directory or does not exist, skipping 'empty' operation.
Emptying directory /var/tmp
--- Running action sequence: target_setup
Setting up filesystems per filesystem type
Creating squashfs...
Parallel mksquashfs: Using 4 processors
Creating 4.0 filesystem on /home/catalyst/builds/default/livecd-stage2-ia64-20140603//image.squashfs, block size 131072.
\r[- ] 200/33193 0%\r[- ] 300/33193 0%\r[=| ] 600/33193 1%\r[=| ] 700/33193 2%\r[=| ] 800/33193 2%\r[=/ ] 1100/33193 3%\r[==| ] 1600/33193 4%\r[===| ] 2000/33193 6%\r[====/ ] 2600/33193 7%\r[====\ ] 2700/33193 8%\r[=====\ ] 2900/33193 8%\r[======/ ] 3600/33193 10%\r[======/
] 3700/33193 11%\r[======/ ] 3800/33193 11%\r[======/ ] 3900/33193 11%\r[=======/ ] 4000/33193 12%\r[=======/ ] 4100/33193 12%\r[=======/ ] 4200/33193 12%\r[=======/ ] 4300/33193 12%\r[=======/ ] 4400/33193 13%\r[=======/ ] 4500/33193 13%\r[========/ ] 4600/33193 13%\r[========/ ] 4700/33193 14%\r[========/ ] 4800/33193 14%\r[========/ ] 4900/33193
14%\r[========/ \0 ] 5000/33193 15%\r[=========- ] 5200/33193 15%\r[=========- ] 5500/33193 16%\r[==========- ] 5900/33193 17%\r[==========- ] 6000/33193 18%\r[==========- ] 6100/33193 18%\r[===========- ] 6200/33193 18%\r[===========- ] 6300/33193 18%\r[===========- ] 6400/33193 19%\r[===========- ] 6500/33193 19%\r[===========- ] 6600/33193 19%\r[===========- ] 6700/33193 20%\r[============-
] 6800/33193 20%\r[============- ] 6900/33193 20%\r[============\ ] 7000/33193 21%\r[============\ ] 7100/33193 21%\r[============\ ] 7200/33193 21%\r[============\ ] 7300/33193 21%\r[=============\ ] 7400/33193 22%\r[=============\ ] 7500/33193 22%\r[=============\ ] 7600/33193 22%\r[=============\ ] 7700/33193 23%\r[=============\ ] 7800/33193 23%\r[==============\ ] 7900/33193 23%\r[==============\ ] 800
0/33193 24%\r[==============\ ] 8100/33193 24%\r[==============\0\ ] 8200/33193 24%\r[==============\ ] 8400/33193 25%\r[===============\ ] 8500/33193 25%\r[===============\ ] 8600/33193 25%\r[===============\ ] 8700/33193 26%\r[===============| ] 8800/33193 26%\r[===============| ] 8900/33193 26%\r[===============| ] 9000/33193 27%\r[================| ] 9300/33193 28%\r[================/ ] 9400/33193 28%\r[================/ ] 9500/33193 28%\r[=================/
] 9600/33193 28%\r[=================/ ] 9700/33193 29%\r[=================/ ] 9800/33193 29%\r[=================/ ] 9900/33193 29%\r[=================/ ] 10000/33193 30%\r[=================/ ] 10100/33193 30%\r[==================/ ] 10200/33193 30%\r[==================/ ] 10300/33193 31%\r[==================/ ] 10400/33193 31%\r[==================/ ] 10500/33193 31%\r[==================/ ] 10600/33193 31%\r[===================/ ] 10700/33193 32%\r[===================/
] 10800/33193 32%\r[===================/ ] 10900/33193 32%\r[===================/ ] \011000/33193 33%\r[===================/ ] 11100/33193 33%\r[===================- ] 11200/33193 33%\r[====================- ] 11300/33193 34%\r[====================- ] 11400/33193 34%\r[====================- ] 11600/33193 34%\r[====================- ] 11700/33193 35%\r[====================- ] 11800/33193 35%\r[=====================- ] 12000/33193 36%\r[=====================- ] 12100/33193 36%\r[=====================- ] 12200/33193 36%\r[===============
======- ] 12300/33193 37%\r[======================- ] 12400/33193 37%\r[======================- ] 12500/33193 37%\r[======================- ] 12600/33193 37%\r[======================- ] 12700/33193 38%\r[======================- ] 12800/33193 38%\r[======================- ] 12900/33193 38%\r[=======================- ] 13000/33193 39%\r[=======================- ] 13100/33193 39%\r[=======================- ] 13200/33193 39%\r[=======================\ ] 13300/33193 40%\r[=======================\ ] 13400/33193 40%\r[=======================\
] 13500/33193 40%\r[========================\ ] 13600/33193 40%\r[========================\ ] 13700/33193 41%\r[========================\ \0 ] 13800/33193 41%\r[========================\ ] 13900/33193 41%\r[========================\ ] 14000/33193 42%\r[=========================\ ] 14100/33193 42%\r[=========================| ] 14200/33193 42%\r[==========================/ ] 15100/33193 45%\r[===========================/ ] 15200/33193 45%\r[===========================/ ] 15300/33193 46%\r[===========================- ] 15400/33193 46%\r[===========================- ] 15500/33193 46%\r[========
===================- ] 15600/33193 46%\r[===========================\ ] 15700/33193 47%\r[============================\ ] 15900/33193 47%\r[============================| ] 16000/33193 48%\r[============================- ] 16100/33193 48%\r[============================- ] 16200/33193 48%\r[============================- ] 16300/33193 49%\r[=============================\ ] 16400/33193 49%\r[=============================\ ] 16500/33193 49%\r[=============================\ ] 16600/33193 50%\r[=============================\ ] 16700/33193 50%\r[=============================\ ] 16800/33193 50%\r[==============================\
] 17100/33193 51%\r[==============================\ ] 17200/33193 51%\r[==============================| ] 17300/33193 52%\r[==============================| ] 17400/33193 52%\0\r[===============================| ] 17700/33193 53%\r[===============================/ ] 17900/33193 53%\r[===============================/ ] 18000/33193 54%\r[================================- ] 18100/33193 54%\r[================================| ] 18200/33193 54%\r[================================| ] 18300/33193 55%\r[================================/ ] 18500/33193 55%\r[=================================/ ] 18600/33193 56%\r[=================================/ ] 18700/33193 56%\r[=
================================/ ] 18800/33193 56%\r[=================================/ ] 18900/33193 56%\r[=================================/ ] 19000/33193 57%\r[=================================/ ] 19100/33193 57%\r[==================================/ ] 19200/33193 57%\r[==================================- ] 19300/33193 58%\r[==================================- ] 19400/33193 58%\r[==================================- ] 19500/33193 58%\r[===================================/ ] 19800/33193 59%\r[===================================- ] 19900/33193 59%\r[===================================- ] 20100/33193 60%\r[====================================\ ] 20600/33193 62%\r[====================================\
] 20700/33193 62%\r[======================================\ ] 21500/33193 64%\r[======================================\ ] 21600/33193 65%\r[======================================\ ] 21700/33193 65%\r[=======================================\ \0 ] 22100/33193 66%\r[=======================================| ] 22500/33193 67%\r[========================================| ] 22600/33193 68%\r[========================================\ ] 23000/33193 69%\r[=========================================\ ] 23200/33193 69%\r[=========================================\ ] 23300/33193 70%\r[=========================================| ] 23400/33193 70%\r[==========================================| ] 23700/33193 71%\r[==========================================| ] 23800/33193
71%\r[==========================================| ] 23900/33193 72%\r[==========================================| ] 24000/33193 72%\r[==========================================| ] 24100/33193 72%\r[===========================================| ] 24200/33193 72%\r[===========================================| ] 24300/33193 73%\r[===========================================| ] 24500/33193 73%\r[===========================================| ] 24700/33193 74%\r[============================================| ] 24900/33193 75%\r[============================================/ ] 25000/33193 75%\r[============================================/ ] 25100/33193 75%\r[============================================/ ] 25200/33193 75%\r[============================================/ ] 25300/33193 76%\r[===============================
==============/ ] 25400/33193 76%\r[=============================================/ ] 25500/33193 76%\r[=============================================/ ] 25600/33193 77%\r[=============================================/ ] 25700/33193 77%\r[=============================================/ ] 25800/33193 77%\r[==============\0================================/ ] 25900/33193 78%\r[==============================================/ ] 26000/33193 78%\r[==============================================/ ] 26100/33193 78%\r[==============================================/ ] 26200/33193 78%\r[==============================================/ ] 26300/33193 79%\r[==============================================/ ] 26400/33193 79%\r[===============================================/ ] 26500/33193 79%\r[===============================================/ ] 26600
/33193 80%\r[===============================================/ ] 26800/33193 80%\r[===============================================/ ] 27000/33193 81%\r[================================================/ ] 27100/33193 81%\r[================================================/ ] 27300/33193 82%\r[================================================/ ] 27400/33193 82%\r[================================================/ ] 27500/33193 82%\r[=================================================- ] 27600/33193 83%\r[====================================================- ] 29600/33193 89%\r[====================================================- ] 29700/33193 89%\r[====================================================- ] 29800/33193 89%\r[=====================================================- ] 29900/33193 90%\r[=====================================================- ] 30000/33193 90%\r[========================
=============================- ] 30100/33193 90%\r[=====================================================- ] 30200/33193 90%\r[=====================================================- ] 30300/33193 91%\r[======================================================- ] 30500/33193 91%\r[======================================================\ ] 30600/33193 92%\r[======================================================\ ] \030700/33193 92%\r[======================================================\ ] 30800/33193 92%\r[======================================================\ ] 30900/33193 93%\r[=======================================================\ ] 31000/33193 93%\r[=======================================================\ ] 31300/33193 94%\r[=======================================================\ ] 31400/33193 94%\r[=======================================================\ ] 31500/33193 94%\r[=========================================================|
] 32100/33193 96%\r[=========================================================| ] 32200/33193 97%\r[=========================================================| ] 32300/33193 97%\r[=========================================================| ] 32400/33193 97%\r[=========================================================| ] 32500/33193 97%\r[=========================================================| ] 32600/33193 98%\r[==========================================================| ] 32700/33193 98%\r[==========================================================| ] 32800/33193 98%\r[==========================================================| ] 32900/33193 99%\r[==========================================================| ] 33000/33193 99%\r[==========================================================| ] 33100/33193 99%\r[===========================================================|] 33193/33193 100%
Exportable Squashfs 4.0 filesystem, gzip compressed, data block size 131072
compressed data, compressed metadata, compressed fragments, no xattrs
duplicates are removed
Filesystem size 166515.23 Kbytes (162.61 Mbytes)
25.07% of uncompressed filesystem size (664131.48 Kbytes)
Inode table size 340831 bytes (332.84 Kbytes)
28.44% of uncompressed inode table size (1198379 bytes)
Directory table size 324567 bytes (316.96 Kbytes)
44.27% of uncompressed directory table size (733136 bytes)
Number of duplicate files found 4073
Number of inodes 35350
Number of files 30018
Number of fragments 1804
Number of symbolic links 2663
Number of device nodes 271
Number of fifo nodes 0
Number of socket nodes 0
Number of directories 2398
Number of ids (unique uids + gids) 12
Number of uids 4
root (0)
man (13)
nobody (65534)
ntp (123)
Number of gids 10
root (0)
disk (6)
kmem (9)
tty (5)
unknown (248)
wheel (10)
utmp (406)
unknown (249)
portage (250)
ntp (123)
--- Running action sequence: setup_overlay
--- Running action sequence: create_iso
17496+0 records in
17496+0 records out
17915904 bytes (18 MB) copied, 0.10891 s, 165 MB/s
mkfs.fat 3.0.22 (2013-07-19)
>> Populating EFI image...
'/home/catalyst/builds/default/livecd-stage2-ia64-20140603//boot/System.map-gentoo' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140603//gentoo.efimg.mountPoint/System.map-gentoo'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140603//boot/efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140603//gentoo.efimg.mountPoint/efi'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140603//boot/efi/boot' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140603//gentoo.efimg.mountPoint/efi/boot'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140603//boot/efi/boot/gentoo.igz' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140603//gentoo.efimg.mountPoint/efi/boot/gentoo.igz'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140603//boot/efi/boot/bootia64.efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140603//gentoo.efimg.mountPoint/efi/boot/bootia64.efi'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140603//boot/efi/boot/elilo.msg' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140603//gentoo.efimg.mountPoint/efi/boot/elilo.msg'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140603//boot/efi/boot/gentoo' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140603//gentoo.efimg.mountPoint/efi/boot/gentoo'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140603//boot/efi/boot/elilo.conf' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140603//gentoo.efimg.mountPoint/efi/boot/elilo.conf'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140603//boot/elilo.conf' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140603//gentoo.efimg.mountPoint/elilo.conf'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140603//boot/elilo.efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140603//gentoo.efimg.mountPoint/elilo.efi'
>> Removing /boot...
>> Running mkisofs to create iso image....
>> mkisofs -R -l -b gentoo.efimg -c boot.cat -no-emul-boot -J -V "Gentoo Linux IA64 20140603" -o /var/tmp/catalyst/builds/default/install-ia64-minimal-20140603.iso /home/catalyst/builds/default/livecd-stage2-ia64-20140603/
mkisofs: No such file or directory. Unable to open disc image file '/var/tmp/catalyst/builds/default/install-ia64-minimal-20140603.iso'.
Cannot make ISO image
!!! catalyst: ISO creation script failed.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1303, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1376, in create_iso
env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/livecd-stage2-ia64-20140603/.catalyst_lock'
Full build log at /tmp/catalyst-auto.3032/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2014-05-27 12:31 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2014-05-27 12:31 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
livecd: removing /usr/lib*/perl5/site_perl
livecd: removing /usr/lib*/gcc-lib/*/*/libgcj*
livecd: removing /usr/sbin/archive-conf
livecd: removing /usr/sbin/dispatch-conf
livecd: removing /usr/sbin/emaint
livecd: removing /usr/sbin/emerge-webrsync
livecd: removing /usr/sbin/env-update
livecd: removing /usr/sbin/fb*
livecd: removing /usr/sbin/fixpackages
livecd: removing /usr/sbin/quickpkg
livecd: removing /usr/sbin/regenworld
livecd: removing /usr/share/consolefonts/1*
livecd: removing /usr/share/consolefonts/7*
livecd: removing /usr/share/consolefonts/8*
livecd: removing /usr/share/consolefonts/9*
livecd: removing /usr/share/consolefonts/A*
livecd: removing /usr/share/consolefonts/C*
livecd: removing /usr/share/consolefonts/E*
livecd: removing /usr/share/consolefonts/G*
livecd: removing /usr/share/consolefonts/L*
livecd: removing /usr/share/consolefonts/M*
livecd: removing /usr/share/consolefonts/R*
livecd: removing /usr/share/consolefonts/a*
livecd: removing /usr/share/consolefonts/c*
livecd: removing /usr/share/consolefonts/dr*
livecd: removing /usr/share/consolefonts/g*
livecd: removing /usr/share/consolefonts/i*
livecd: removing /usr/share/consolefonts/k*
livecd: removing /usr/share/consolefonts/l*
livecd: removing /usr/share/consolefonts/r*
livecd: removing /usr/share/consolefonts/s*
livecd: removing /usr/share/consolefonts/t*
livecd: removing /usr/share/consolefonts/v*
livecd: removing /usr/share/misc/*.old
--- Running action sequence: empty
Emptying directory /etc/cron.daily
/etc/cron.hourly not a directory or does not exist, skipping 'empty' operation.
/etc/cron.monthly not a directory or does not exist, skipping 'empty' operation.
/etc/cron.weekly not a directory or does not exist, skipping 'empty' operation.
Emptying directory /etc/logrotate.d
/etc/modules.autoload.d not a directory or does not exist, skipping 'empty' operation.
/etc/runlevels/single not a directory or does not exist, skipping 'empty' operation.
Emptying directory /etc/skel
/lib/dev-state not a directory or does not exist, skipping 'empty' operation.
/lib/udev-state not a directory or does not exist, skipping 'empty' operation.
/lib64/dev-state not a directory or does not exist, skipping 'empty' operation.
/lib64/udev-state not a directory or does not exist, skipping 'empty' operation.
/root/.ccache not a directory or does not exist, skipping 'empty' operation.
Emptying directory /tmp
/usr/diet/include not a directory or does not exist, skipping 'empty' operation.
/usr/diet/man not a directory or does not exist, skipping 'empty' operation.
/usr/i386-gentoo-linux-uclibc not a directory or does not exist, skipping 'empty' operation.
/usr/i386-pc-linux-gnu not a directory or does not exist, skipping 'empty' operation.
/usr/i386-pc-linux-uclibc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/config not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/doc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/etc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/awk not a directory or does not exist, skipping 'empty' operation.
/usr/lib/ccache not a directory or does not exist, skipping 'empty' operation.
/usr/lib/gcc-config not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/lib/gconv
Emptying directory /usr/lib/nfs
/usr/lib/perl5/site_perl not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/lib/portage
/usr/lib/python2.2 not a directory or does not exist, skipping 'empty' operation.
/usr/lib/python2.3 not a directory or does not exist, skipping 'empty' operation.
/usr/lib/python2.4/test not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/config not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/doc not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/etc not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/awk not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/ccache not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/gcc-config not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/gconv not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/nfs not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/perl5/site_perl not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/portage not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.2 not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.3 not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.4/test not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/local
Emptying directory /usr/portage
/usr/powerpc-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
/usr/powerpc64-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/aclocal
Emptying directory /usr/share/baselayout
/usr/share/binutils-data not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/consolefonts/partialfonts
Emptying directory /usr/share/consoletrans
Emptying directory /usr/share/dict
Emptying directory /usr/share/doc
/usr/share/emacs not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/et
Emptying directory /usr/share/gcc-data
/usr/share/genkernel not a directory or does not exist, skipping 'empty' operation.
/usr/share/gettext not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/glib-2.0
/usr/share/gnuconfig not a directory or does not exist, skipping 'empty' operation.
/usr/share/gtk-doc not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/i18n
Emptying directory /usr/share/info
/usr/share/lcms not a directory or does not exist, skipping 'empty' operation.
/usr/share/libtool not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/locale
Emptying directory /usr/share/man
/usr/share/rfc not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/ss
/usr/share/state not a directory or does not exist, skipping 'empty' operation.
/usr/share/texinfo not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/unimaps
Emptying directory /usr/share/zoneinfo
/usr/sparc-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/src
/usr/x86_64-pc-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /var/cache
Emptying directory /var/empty
Emptying directory /var/lib/portage
Emptying directory /var/log
Emptying directory /var/spool
/var/state not a directory or does not exist, skipping 'empty' operation.
Emptying directory /var/tmp
--- Running action sequence: target_setup
Setting up filesystems per filesystem type
Creating squashfs...
Parallel mksquashfs: Using 4 processors
Creating 4.0 filesystem on /home/catalyst/builds/default/livecd-stage2-ia64-20140527//image.squashfs, block size 131072.
\r[- ] 400/33114 1%\r[| ] 500/33114 1%\r[=| ] 700/33114 2%\r[=| ] 800/33114 2%\r[=/ ] 1100/33114 3%\r[==- ] 1200/33114 3%\r[====\ ] 2400/33114 7%\r[====/ ] 2500/33114 7%\r[======\ ] 3500/33114 10%\r[======\ ] 3600/33114 10%\r[======\ ] 3700/33114 11%\r[======\ ] 3800/33114 11%\r[======\
] 3900/33114 11%\r[=======\ ] 4000/33114 12%\r[=======\ ] 4100/33114 12%\r[=======\ ] 4200/33114 12%\r[=======\ ] 4300/33114 12%\r[=======| ] 4400/33114 13%\r[========| ] 4500/33114 13%\r[========| ] 4800/33114 14%\r[========| ] 4900/33114 14%\r[=========| ] 5100/33114 15%\r[=========| ] 5200/33114 15%\r[=========| ] 5300/33114 16%\r[=========| ] 5400/33114
16%\r[==========/ \0 ] 5800/33114 17%\r[==========/ ] 5900/33114 17%\r[==========/ ] 6000/33114 18%\r[==========/ ] 6100/33114 18%\r[===========/ ] 6200/33114 18%\r[===========/ ] 6300/33114 19%\r[===========/ ] 6400/33114 19%\r[===========/ ] 6500/33114 19%\r[===========/ ] 6600/33114 19%\r[===========/ ] 6700/33114 20%\r[============/ ] 6800/33114 20%\r[============/ ] 6900/33114 20%\r[============/
] 7000/33114 21%\r[============/ ] 7100/33114 21%\r[============/ ] 7200/33114 21%\r[=============/ ] 7300/33114 22%\r[=============- ] 7400/33114 22%\r[=============- ] 7500/33114 22%\r[=============- ] 7600/33114 22%\r[=============- ] 7700/33114 23%\r[=============- ] 7800/33114 23%\r[==============- ] 7900/33114 23%\r[==============- ] 8000/33114 24%\r[==============- ] 8100/33114 24%\r[==============- ] 820
0/33114 24%\r[==============- ] 8300/33114 25%\r[==============\0- ] 8400/33114 25%\r[===============- ] 8500/33114 25%\r[===============- ] 8600/33114 25%\r[===============- ] 8800/33114 26%\r[===============- ] 8900/33114 26%\r[================- ] 9000/33114 27%\r[================\ ] 9200/33114 27%\r[================\ ] 9300/33114 28%\r[================| ] 9500/33114 28%\r[=================| ] 9600/33114 28%\r[=================| ] 9800/33114 29%\r[=================|
] 9900/33114 29%\r[==================| ] 10200/33114 30%\r[==================| ] 10400/33114 31%\r[==================| ] 10500/33114 31%\r[==================| ] 10600/33114 32%\r[===================| ] 10700/33114 32%\r[===================| ] 10800/33114 32%\r[===================| ] 10900/33114 32%\r[===================| ] 11000/33114 33%\r[===================| ] 11100/33114 33%\r[====================| ] 11300/33114 34%\r[====================| ] 11400/33114 34%\r[====================/
] 11500/33114 34%\r[====================/ ] 11600/33114 35%\r[====================/ ] \011700/33114 35%\r[=====================/ ] 12000/33114 36%\r[=====================/ ] 12100/33114 36%\r[=====================/ ] 12300/33114 37%\r[======================/ ] 12400/33114 37%\r[======================/ ] 12500/33114 37%\r[======================/ ] 12600/33114 38%\r[======================/ ] 12700/33114 38%\r[======================/ ] 12900/33114 38%\r[=======================/ ] 13000/33114 39%\r[=======================/ ] 13100/33114 39%\r[===============
========/ ] 13200/33114 39%\r[=======================/ ] 13300/33114 40%\r[=======================- ] 13400/33114 40%\r[========================- ] 13500/33114 40%\r[========================- ] 13600/33114 41%\r[========================- ] 13700/33114 41%\r[========================- ] 13800/33114 41%\r[========================- ] 13900/33114 41%\r[========================- ] 14000/33114 42%\r[=========================- ] 14100/33114 42%\r[=========================/ ] 14300/33114 43%\r[==========================| ] 15100/33114 45%\r[===========================|
] 15200/33114 45%\r[===========================| ] 15500/33114 46%\r[===========================| ] 15600/33114 47%\r[============================/ \0 ] 16200/33114 48%\r[=============================/ ] 16300/33114 49%\r[=============================- ] 16500/33114 49%\r[=============================- ] 16600/33114 50%\r[=============================- ] 16700/33114 50%\r[=============================- ] 16800/33114 50%\r[==============================- ] 16900/33114 51%\r[==============================- ] 17000/33114 51%\r[==============================- ] 17100/33114 51%\r[==============================- ] 17200/33114 51%\r[========
======================- ] 17300/33114 52%\r[===============================\ ] 17700/33114 53%\r[===============================\ ] 17800/33114 53%\r[================================\ ] 18000/33114 54%\r[================================\ ] 18300/33114 55%\r[================================| ] 18400/33114 55%\r[=================================| ] 18600/33114 56%\r[=================================| ] 18700/33114 56%\r[=================================| ] 18900/33114 57%\r[=================================| ] 19000/33114 57%\r[==================================| ] 19200/33114 57%\r[==================================/ ] 19300/33114 58%\r[==================================/
] 19400/33114 58%\r[==================================| ] 19600/33114 59%\r[===================================/ ] 19800/33114 59%\r[===================================/ ] 20000/33114 60%\0\r[====================================- ] 20600/33114 62%\r[=====================================| ] 20900/33114 63%\r[=====================================| ] 21200/33114 64%\r[======================================- ] 21700/33114 65%\r[=======================================- ] 22000/33114 66%\r[=======================================- ] 22100/33114 66%\r[=======================================- ] 22200/33114 67%\r[=======================================- ] 22300/33114 67%\r[=======================================- ] 22400/33114 67%\r[=
=======================================- ] 22600/33114 68%\r[========================================- ] 22700/33114 68%\r[========================================/ ] 23000/33114 69%\r[=========================================/ ] 23100/33114 69%\r[=========================================- ] 23400/33114 70%\r[=========================================- ] 23500/33114 70%\r[==========================================- ] 23700/33114 71%\r[==========================================- ] 23800/33114 71%\r[==========================================- ] 23900/33114 72%\r[==========================================- ] 24000/33114 72%\r[==========================================- ] 24100/33114 72%\r[===========================================- ] 24200/33114 73%\r[======================================
=====- ] 24300/33114 73%\r[============================================\ ] 24700/33114 74%\r[============================================\ ] 24800/33114 74%\r[============================================\ ] 24900/33114 75%\r[============================================\ \0 ] 25000/33114 75%\r[============================================\ ] 25100/33114 75%\r[============================================\ ] 25200/33114 76%\r[=============================================\ ] 25300/33114 76%\r[=============================================\ ] 25400/33114 76%\r[=============================================\ ] 25500/33114 77%\r[=============================================\ ] 25600/33114 77%\r[=============================================\ ] 25700/33114 77%\r[=============================================\ ] 25800/33114
77%\r[==============================================\ ] 25900/33114 78%\r[==============================================\ ] 26100/33114 78%\r[==============================================\ ] 26200/33114 79%\r[==============================================\ ] 26300/33114 79%\r[===============================================\ ] 26400/33114 79%\r[===============================================\ ] 26500/33114 80%\r[===============================================\ ] 26600/33114 80%\r[===============================================\ ] 26700/33114 80%\r[===============================================\ ] 26800/33114 80%\r[================================================\ ] 27000/33114 81%\r[================================================| ] 27300/33114 82%\r[================================================| ] 27400/33114 82%\r[===============================
==================| ] 27900/33114 84%\r[=================================================| ] 28000/33114 84%\r[==================================================| ] 28100/33114 84%\r[==================================================| ] 28200/33114 85%\r[==================================================| ] 28300/33114 85%\r[==============\0====================================| ] 28400/33114 85%\r[==================================================| ] 28500/33114 86%\r[===================================================| ] 28700/33114 86%\r[===================================================| ] 28800/33114 86%\r[===================================================| ] 28900/33114 87%\r[===================================================| ] 29000/33114 87%\r[====================================================| ] 29200/33114 88%\r[====================================================| ] 29400
/33114 88%\r[====================================================| ] 29500/33114 89%\r[====================================================/ ] 29600/33114 89%\r[====================================================/ ] 29700/33114 89%\r[=====================================================/ ] 30200/33114 91%\r[======================================================/ ] 30600/33114 92%\r[======================================================/ ] 30800/33114 93%\r[=======================================================/ ] 30900/33114 93%\r[=======================================================/ ] 31100/33114 93%\r[=======================================================/ ] 31200/33114 94%\r[=======================================================/ ] 31300/33114 94%\r[========================================================/ ] 31500/33114 95%\r[========================================================- ] 31600/33114 95%\r[========================
================================- ] 31800/33114 96%\r[========================================================- ] 31900/33114 96%\r[==========================================================- ] 32700/33114 98%\r[==========================================================- ] 32900/33114 99%\r[==========================================================- ] 33000/33114 99%\r[==========================================================- ] \033100/33114 99%\r[===========================================================-] 33114/33114 100%
Exportable Squashfs 4.0 filesystem, gzip compressed, data block size 131072
compressed data, compressed metadata, compressed fragments, no xattrs
duplicates are removed
Filesystem size 165894.04 Kbytes (162.01 Mbytes)
25.06% of uncompressed filesystem size (662111.09 Kbytes)
Inode table size 339692 bytes (331.73 Kbytes)
28.40% of uncompressed inode table size (1196113 bytes)
Directory table size 324303 bytes (316.70 Kbytes)
44.30% of uncompressed directory table size (732010 bytes)
Number of duplicate files found 4044
Number of inodes 35281
Number of files 29952
Number of fragments 1802
Number of symbolic links 2663
Number of device nodes 271
Number of fifo nodes 0
Number of socket nodes 0
Number of directories 2395
Number of ids (unique uids + gids) 12
Number of uids 4
root (0)
man (13)
nobody (65534)
ntp (123)
Number of gids 10
root (0)
disk (6)
kmem (9)
tty (5)
unknown (248)
wheel (10)
utmp (406)
unknown (249)
portage (250)
ntp (123)
--- Running action sequence: setup_overlay
--- Running action sequence: create_iso
17496+0 records in
17496+0 records out
17915904 bytes (18 MB) copied, 0.548006 s, 32.7 MB/s
mkfs.fat 3.0.22 (2013-07-19)
>> Populating EFI image...
'/home/catalyst/builds/default/livecd-stage2-ia64-20140527//boot/System.map-gentoo' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140527//gentoo.efimg.mountPoint/System.map-gentoo'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140527//boot/efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140527//gentoo.efimg.mountPoint/efi'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140527//boot/efi/boot' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140527//gentoo.efimg.mountPoint/efi/boot'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140527//boot/efi/boot/gentoo.igz' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140527//gentoo.efimg.mountPoint/efi/boot/gentoo.igz'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140527//boot/efi/boot/bootia64.efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140527//gentoo.efimg.mountPoint/efi/boot/bootia64.efi'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140527//boot/efi/boot/elilo.msg' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140527//gentoo.efimg.mountPoint/efi/boot/elilo.msg'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140527//boot/efi/boot/gentoo' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140527//gentoo.efimg.mountPoint/efi/boot/gentoo'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140527//boot/efi/boot/elilo.conf' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140527//gentoo.efimg.mountPoint/efi/boot/elilo.conf'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140527//boot/elilo.conf' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140527//gentoo.efimg.mountPoint/elilo.conf'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140527//boot/elilo.efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140527//gentoo.efimg.mountPoint/elilo.efi'
>> Removing /boot...
>> Running mkisofs to create iso image....
>> mkisofs -R -l -b gentoo.efimg -c boot.cat -no-emul-boot -J -V "Gentoo Linux IA64 20140527" -o /var/tmp/catalyst/builds/default/install-ia64-minimal-20140527.iso /home/catalyst/builds/default/livecd-stage2-ia64-20140527/
mkisofs: No such file or directory. Unable to open disc image file '/var/tmp/catalyst/builds/default/install-ia64-minimal-20140527.iso'.
Cannot make ISO image
!!! catalyst: ISO creation script failed.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1303, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1376, in create_iso
env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/livecd-stage2-ia64-20140527/.catalyst_lock'
Full build log at /tmp/catalyst-auto.25223/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2014-05-20 14:42 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2014-05-20 14:42 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
livecd: removing /usr/lib*/perl5/site_perl
livecd: removing /usr/lib*/gcc-lib/*/*/libgcj*
livecd: removing /usr/sbin/archive-conf
livecd: removing /usr/sbin/dispatch-conf
livecd: removing /usr/sbin/emaint
livecd: removing /usr/sbin/emerge-webrsync
livecd: removing /usr/sbin/env-update
livecd: removing /usr/sbin/fb*
livecd: removing /usr/sbin/fixpackages
livecd: removing /usr/sbin/quickpkg
livecd: removing /usr/sbin/regenworld
livecd: removing /usr/share/consolefonts/1*
livecd: removing /usr/share/consolefonts/7*
livecd: removing /usr/share/consolefonts/8*
livecd: removing /usr/share/consolefonts/9*
livecd: removing /usr/share/consolefonts/A*
livecd: removing /usr/share/consolefonts/C*
livecd: removing /usr/share/consolefonts/E*
livecd: removing /usr/share/consolefonts/G*
livecd: removing /usr/share/consolefonts/L*
livecd: removing /usr/share/consolefonts/M*
livecd: removing /usr/share/consolefonts/R*
livecd: removing /usr/share/consolefonts/a*
livecd: removing /usr/share/consolefonts/c*
livecd: removing /usr/share/consolefonts/dr*
livecd: removing /usr/share/consolefonts/g*
livecd: removing /usr/share/consolefonts/i*
livecd: removing /usr/share/consolefonts/k*
livecd: removing /usr/share/consolefonts/l*
livecd: removing /usr/share/consolefonts/r*
livecd: removing /usr/share/consolefonts/s*
livecd: removing /usr/share/consolefonts/t*
livecd: removing /usr/share/consolefonts/v*
livecd: removing /usr/share/misc/*.old
--- Running action sequence: empty
Emptying directory /etc/cron.daily
/etc/cron.hourly not a directory or does not exist, skipping 'empty' operation.
/etc/cron.monthly not a directory or does not exist, skipping 'empty' operation.
/etc/cron.weekly not a directory or does not exist, skipping 'empty' operation.
Emptying directory /etc/logrotate.d
/etc/modules.autoload.d not a directory or does not exist, skipping 'empty' operation.
/etc/runlevels/single not a directory or does not exist, skipping 'empty' operation.
Emptying directory /etc/skel
/lib/dev-state not a directory or does not exist, skipping 'empty' operation.
/lib/udev-state not a directory or does not exist, skipping 'empty' operation.
/lib64/dev-state not a directory or does not exist, skipping 'empty' operation.
/lib64/udev-state not a directory or does not exist, skipping 'empty' operation.
/root/.ccache not a directory or does not exist, skipping 'empty' operation.
Emptying directory /tmp
/usr/diet/include not a directory or does not exist, skipping 'empty' operation.
/usr/diet/man not a directory or does not exist, skipping 'empty' operation.
/usr/i386-gentoo-linux-uclibc not a directory or does not exist, skipping 'empty' operation.
/usr/i386-pc-linux-gnu not a directory or does not exist, skipping 'empty' operation.
/usr/i386-pc-linux-uclibc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/config not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/doc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/etc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/awk not a directory or does not exist, skipping 'empty' operation.
/usr/lib/ccache not a directory or does not exist, skipping 'empty' operation.
/usr/lib/gcc-config not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/lib/gconv
Emptying directory /usr/lib/nfs
/usr/lib/perl5/site_perl not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/lib/portage
/usr/lib/python2.2 not a directory or does not exist, skipping 'empty' operation.
/usr/lib/python2.3 not a directory or does not exist, skipping 'empty' operation.
/usr/lib/python2.4/test not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/config not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/doc not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/etc not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/awk not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/ccache not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/gcc-config not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/gconv not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/nfs not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/perl5/site_perl not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/portage not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.2 not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.3 not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.4/test not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/local
Emptying directory /usr/portage
/usr/powerpc-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
/usr/powerpc64-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/aclocal
Emptying directory /usr/share/baselayout
/usr/share/binutils-data not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/consolefonts/partialfonts
Emptying directory /usr/share/consoletrans
Emptying directory /usr/share/dict
Emptying directory /usr/share/doc
/usr/share/emacs not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/et
Emptying directory /usr/share/gcc-data
/usr/share/genkernel not a directory or does not exist, skipping 'empty' operation.
/usr/share/gettext not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/glib-2.0
/usr/share/gnuconfig not a directory or does not exist, skipping 'empty' operation.
/usr/share/gtk-doc not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/i18n
Emptying directory /usr/share/info
/usr/share/lcms not a directory or does not exist, skipping 'empty' operation.
/usr/share/libtool not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/locale
Emptying directory /usr/share/man
/usr/share/rfc not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/ss
/usr/share/state not a directory or does not exist, skipping 'empty' operation.
/usr/share/texinfo not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/unimaps
Emptying directory /usr/share/zoneinfo
/usr/sparc-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/src
/usr/x86_64-pc-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /var/cache
Emptying directory /var/empty
Emptying directory /var/lib/portage
Emptying directory /var/log
Emptying directory /var/spool
/var/state not a directory or does not exist, skipping 'empty' operation.
Emptying directory /var/tmp
--- Running action sequence: target_setup
Setting up filesystems per filesystem type
Creating squashfs...
Parallel mksquashfs: Using 4 processors
Creating 4.0 filesystem on /home/catalyst/builds/default/livecd-stage2-ia64-20140520//image.squashfs, block size 131072.
\r[\ ] 400/33114 1%\r[| ] 500/33114 1%\r[=| ] 700/33114 2%\r[=| ] 800/33114 2%\r[=| ] 900/33114 2%\r[=/ ] 1100/33114 3%\r[==- ] 1200/33114 3%\r[==\ ] 1300/33114 3%\r[==- ] 1400/33114 4%\r[===- ] 1900/33114 5%\r[===/ ] 2100/33114 6%\r[======| ] 3600/33114 10%\r[======|
] 3700/33114 11%\r[======| ] 3800/33114 11%\r[======| ] 3900/33114 11%\r[=======| ] 4000/33114 12%\r[=======| ] 4100/33114 12%\r[=======| ] 4200/33114 12%\r[=======| ] 4300/33114 12%\r[=======| ] 4400/33114 13%\r[========| ] 4500/33114 13%\r[========| ] 4600/33114 13%\r[========| ] 4700/33114 14%\r[========| ] 4900/33114 14%\r[=========| ] 5100/33114
15%\r[=========/ \0 ] 5200/33114 15%\r[=========/ ] 5300/33114 16%\r[=========/ ] 5500/33114 16%\r[==========/ ] 5900/33114 17%\r[==========/ ] 6000/33114 18%\r[==========/ ] 6100/33114 18%\r[===========/ ] 6300/33114 19%\r[===========/ ] 6400/33114 19%\r[===========/ ] 6500/33114 19%\r[===========- ] 6700/33114 20%\r[============- ] 6800/33114 20%\r[============- ] 6900/33114 20%\r[============-
] 7000/33114 21%\r[============- ] 7100/33114 21%\r[============- ] 7200/33114 21%\r[=============- ] 7300/33114 22%\r[=============- ] 7400/33114 22%\r[=============- ] 7500/33114 22%\r[=============- ] 7600/33114 22%\r[=============- ] 7700/33114 23%\r[=============- ] 7800/33114 23%\r[==============- ] 7900/33114 23%\r[==============- ] 8000/33114 24%\r[==============- ] 8100/33114 24%\r[==============- ] 820
0/33114 24%\r[==============- ] 8300/33114 25%\r[==============\0\ ] 8400/33114 25%\r[===============\ ] 8500/33114 25%\r[===============\ ] 8600/33114 25%\r[===============\ ] 8700/33114 26%\r[===============\ ] 8800/33114 26%\r[===============\ ] 8900/33114 26%\r[================\ ] 9000/33114 27%\r[================| ] 9500/33114 28%\r[=================| ] 9600/33114 28%\r[=================| ] 9700/33114 29%\r[=================| ] 9800/33114 29%\r[=================|
] 9900/33114 29%\r[=================| ] 10000/33114 30%\r[=================/ ] 10100/33114 30%\r[==================/ ] 10200/33114 30%\r[==================/ ] 10300/33114 31%\r[==================/ ] 10400/33114 31%\r[==================/ ] 10500/33114 31%\r[==================/ ] 10600/33114 32%\r[===================/ ] 10800/33114 32%\r[===================/ ] 10900/33114 32%\r[===================/ ] 11000/33114 33%\r[===================/ ] 11100/33114 33%\r[===================/
] 11200/33114 33%\r[====================/ ] 11300/33114 34%\r[====================/ ] \011400/33114 34%\r[====================/ ] 11500/33114 34%\r[====================/ ] 11600/33114 35%\r[====================/ ] 11700/33114 35%\r[=====================/ ] 12000/33114 36%\r[=====================/ ] 12100/33114 36%\r[======================- ] 12500/33114 37%\r[======================- ] 12600/33114 38%\r[======================- ] 12700/33114 38%\r[======================- ] 12800/33114 38%\r[======================- ] 12900/33114 38%\r[===============
========- ] 13000/33114 39%\r[=======================- ] 13100/33114 39%\r[=======================- ] 13200/33114 39%\r[=======================- ] 13300/33114 40%\r[=======================- ] 13400/33114 40%\r[========================- ] 13600/33114 41%\r[========================- ] 13700/33114 41%\r[========================- ] 13800/33114 41%\r[========================\ ] 13900/33114 41%\r[========================\ ] 14000/33114 42%\r[=========================\ ] 14100/33114 42%\r[==========================| ] 15000/33114 45%\r[==========================|
] 15100/33114 45%\r[===========================| ] 15200/33114 45%\r[===========================/ ] 15500/33114 46%\r[===========================/ \0 ] 15600/33114 47%\r[============================/ ] 16000/33114 48%\r[=============================\ ] 16600/33114 50%\r[=============================\ ] 16700/33114 50%\r[=============================\ ] 16800/33114 50%\r[==============================\ ] 16900/33114 51%\r[==============================\ ] 17000/33114 51%\r[==============================\ ] 17100/33114 51%\r[==============================\ ] 17300/33114 52%\r[===============================| ] 17600/33114 53%\r[========
=======================| ] 17700/33114 53%\r[===============================| ] 17800/33114 53%\r[===============================| ] 17900/33114 54%\r[================================| ] 18300/33114 55%\r[================================| ] 18400/33114 55%\r[=================================| ] 18600/33114 56%\r[=================================/ ] 18900/33114 57%\r[=================================/ ] 19000/33114 57%\r[==================================/ ] 19100/33114 57%\r[==================================/ ] 19200/33114 57%\r[==================================/ ] 19300/33114 58%\r[==================================/ ] 19400/33114 58%\r[==================================/
] 19500/33114 58%\r[==================================| ] 19600/33114 59%\r[===================================/ ] 19700/33114 59%\r[===================================/ ] 19800/33114 59%\0\r[===================================/ ] 19900/33114 60%\r[===================================/ ] 20000/33114 60%\r[===================================- ] 20100/33114 60%\r[===================================- ] 20200/33114 61%\r[====================================- ] 20300/33114 61%\r[====================================- ] 20400/33114 61%\r[====================================- ] 20500/33114 61%\r[====================================- ] 20600/33114 62%\r[====================================\ ] 20700/33114 62%\r[=
====================================\ ] 20800/33114 62%\r[=====================================/ ] 20900/33114 63%\r[=====================================| ] 21200/33114 64%\r[======================================- ] 21400/33114 64%\r[======================================\ ] 21500/33114 64%\r[======================================\ ] 21600/33114 65%\r[======================================\ ] 21700/33114 65%\r[======================================\ ] 21800/33114 65%\r[=======================================\ ] 21900/33114 66%\r[=======================================\ ] 22000/33114 66%\r[=======================================\ ] 22100/33114 66%\r[=======================================\ ] 22200/33114 67%\r[======================================
=\ ] 22300/33114 67%\r[=======================================\ ] 22400/33114 67%\r[========================================\ ] 22500/33114 67%\r[========================================\ ] 22600/33114 68%\r[========================================- \0 ] 22900/33114 69%\r[=========================================- ] 23100/33114 69%\r[=========================================\ ] 23300/33114 70%\r[=========================================\ ] 23400/33114 70%\r[==========================================\ ] 23700/33114 71%\r[==========================================\ ] 23800/33114 71%\r[==========================================\ ] 23900/33114 72%\r[==========================================\ ] 24000/33114 72%\r[==========================================\ ] 24100/33114
72%\r[===========================================\ ] 24200/33114 73%\r[===========================================\ ] 24300/33114 73%\r[===========================================\ ] 24400/33114 73%\r[===========================================\ ] 24500/33114 73%\r[============================================| ] 24800/33114 74%\r[============================================| ] 24900/33114 75%\r[============================================| ] 25000/33114 75%\r[============================================| ] 25100/33114 75%\r[============================================| ] 25200/33114 76%\r[=============================================| ] 25300/33114 76%\r[=============================================| ] 25400/33114 76%\r[=============================================| ] 25500/33114 77%\r[===============================
==============| ] 25600/33114 77%\r[=============================================| ] 25700/33114 77%\r[=============================================| ] 25800/33114 77%\r[==============================================| ] 25900/33114 78%\r[==============================================| ] 26000/33114 78%\r[==============\0================================| ] 26100/33114 78%\r[==============================================| ] 26200/33114 79%\r[==============================================| ] 26300/33114 79%\r[===============================================| ] 26400/33114 79%\r[===============================================| ] 26500/33114 80%\r[===============================================| ] 26600/33114 80%\r[===============================================| ] 26700/33114 80%\r[===============================================| ] 26800
/33114 80%\r[===============================================| ] 26900/33114 81%\r[================================================| ] 27000/33114 81%\r[================================================| ] 27100/33114 81%\r[================================================| ] 27200/33114 82%\r[================================================| ] 27300/33114 82%\r[================================================| ] 27400/33114 82%\r[================================================| ] 27500/33114 83%\r[=================================================/ ] 28000/33114 84%\r[==================================================/ ] 28100/33114 84%\r[==================================================/ ] 28200/33114 85%\r[==================================================/ ] 28300/33114 85%\r[==================================================/ ] 28400/33114 85%\r[========================
==========================/ ] 28500/33114 86%\r[==================================================/ ] 28600/33114 86%\r[===================================================/ ] 28700/33114 86%\r[===================================================/ ] 28800/33114 86%\r[===================================================/ ] 28900/33114 87%\r[===================================================/ ] \029000/33114 87%\r[===================================================/ ] 29100/33114 87%\r[====================================================/ ] 29200/33114 88%\r[====================================================/ ] 29300/33114 88%\r[====================================================/ ] 29400/33114 88%\r[====================================================/ ] 29500/33114 89%\r[====================================================/ ] 29600/33114 89%\r[====================================================/
] 29700/33114 89%\r[=====================================================/ ] 29800/33114 89%\r[=====================================================/ ] 29900/33114 90%\r[=====================================================/ ] 30000/33114 90%\r[=====================================================- ] 30100/33114 90%\r[=====================================================- ] 30200/33114 91%\r[=====================================================- ] 30300/33114 91%\r[======================================================- ] 30400/33114 91%\r[======================================================- ] 30500/33114 92%\r[======================================================- ] 30600/33114 92%\r[======================================================- ] 30700/33114 92%\r[======================================================- ] 30800/33114 93%\r[=======================================================- ] 30900/33114 93%\r[=================
======================================- ] 31000/33114 93%\r[=======================================================- ] 31100/33114 93%\r[=======================================================- ] 31200/33114 94%\r[=======================================================- ] 31300/33114 94%\r[=======================================================- ] 31400/33114 94%\r[========================================================- ] 31500/33114 95%\r[==============================\0==========================\ ] 31900/33114 96%\r[=========================================================\ ] 32000/33114 96%\r[=========================================================\ ] 32100/33114 96%\r[=========================================================\ ] 32200/33114 97%\r[=========================================================\ ] 32300/33114 97%\r[=========================================================\ ] 32400/33114 97%\r[=====================================================
====\ ] 32500/33114 98%\r[==========================================================\ ] 32600/33114 98%\r[==========================================================\ ] 32700/33114 98%\r[==========================================================\ ] 32800/33114 99%\r[==========================================================\ ] 32900/33114 99%\r[==========================================================\ ] 33000/33114 99%\r[==========================================================\ ] 33100/33114 99%\r[===========================================================\] 33114/33114 100%
Exportable Squashfs 4.0 filesystem, gzip compressed, data block size 131072
compressed data, compressed metadata, compressed fragments, no xattrs
duplicates are removed
Filesystem size 165887.84 Kbytes (162.00 Mbytes)
25.05% of uncompressed filesystem size (662111.38 Kbytes)
Inode table size 340035 bytes (332.07 Kbytes)
28.43% of uncompressed inode table size (1196113 bytes)
Directory table size 324298 bytes (316.70 Kbytes)
44.30% of uncompressed directory table size (732010 bytes)
Number of duplicate files found 4045
Number of inodes 35281
Number of files 29952
Number of fragments 1802
Number of symbolic links 2663
Number of device nodes 271
Number of fifo nodes 0
Number of socket nodes 0
Number of directories 2395
Number of ids (unique uids + gids) 12
Number of uids 4
root (0)
man (13)
nobody (65534)
ntp (123)
Number of gids 10
root (0)
disk (6)
kmem (9)
tty (5)
unknown (248)
wheel (10)
utmp (406)
unknown (249)
portage (250)
ntp (123)
--- Running action sequence: setup_overlay
--- Running action sequence: create_iso
17500+0 records in
17500+0 records out
17920000 bytes (18 MB) copied, 0.115547 s, 155 MB/s
mkfs.fat 3.0.22 (2013-07-19)
>> Populating EFI image...
'/home/catalyst/builds/default/livecd-stage2-ia64-20140520//boot/System.map-gentoo' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140520//gentoo.efimg.mountPoint/System.map-gentoo'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140520//boot/efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140520//gentoo.efimg.mountPoint/efi'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140520//boot/efi/boot' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140520//gentoo.efimg.mountPoint/efi/boot'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140520//boot/efi/boot/gentoo.igz' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140520//gentoo.efimg.mountPoint/efi/boot/gentoo.igz'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140520//boot/efi/boot/bootia64.efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140520//gentoo.efimg.mountPoint/efi/boot/bootia64.efi'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140520//boot/efi/boot/elilo.msg' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140520//gentoo.efimg.mountPoint/efi/boot/elilo.msg'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140520//boot/efi/boot/gentoo' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140520//gentoo.efimg.mountPoint/efi/boot/gentoo'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140520//boot/efi/boot/elilo.conf' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140520//gentoo.efimg.mountPoint/efi/boot/elilo.conf'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140520//boot/elilo.conf' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140520//gentoo.efimg.mountPoint/elilo.conf'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140520//boot/elilo.efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140520//gentoo.efimg.mountPoint/elilo.efi'
>> Removing /boot...
>> Running mkisofs to create iso image....
>> mkisofs -R -l -b gentoo.efimg -c boot.cat -no-emul-boot -J -V "Gentoo Linux IA64 20140520" -o /var/tmp/catalyst/builds/default/install-ia64-minimal-20140520.iso /home/catalyst/builds/default/livecd-stage2-ia64-20140520/
mkisofs: No such file or directory. Unable to open disc image file '/var/tmp/catalyst/builds/default/install-ia64-minimal-20140520.iso'.
Cannot make ISO image
!!! catalyst: ISO creation script failed.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1303, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1376, in create_iso
env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/livecd-stage2-ia64-20140520/.catalyst_lock'
Full build log at /tmp/catalyst-auto.9852/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2014-05-13 12:32 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2014-05-13 12:32 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
livecd: removing /usr/lib*/perl5/site_perl
livecd: removing /usr/lib*/gcc-lib/*/*/libgcj*
livecd: removing /usr/sbin/archive-conf
livecd: removing /usr/sbin/dispatch-conf
livecd: removing /usr/sbin/emaint
livecd: removing /usr/sbin/emerge-webrsync
livecd: removing /usr/sbin/env-update
livecd: removing /usr/sbin/fb*
livecd: removing /usr/sbin/fixpackages
livecd: removing /usr/sbin/quickpkg
livecd: removing /usr/sbin/regenworld
livecd: removing /usr/share/consolefonts/1*
livecd: removing /usr/share/consolefonts/7*
livecd: removing /usr/share/consolefonts/8*
livecd: removing /usr/share/consolefonts/9*
livecd: removing /usr/share/consolefonts/A*
livecd: removing /usr/share/consolefonts/C*
livecd: removing /usr/share/consolefonts/E*
livecd: removing /usr/share/consolefonts/G*
livecd: removing /usr/share/consolefonts/L*
livecd: removing /usr/share/consolefonts/M*
livecd: removing /usr/share/consolefonts/R*
livecd: removing /usr/share/consolefonts/a*
livecd: removing /usr/share/consolefonts/c*
livecd: removing /usr/share/consolefonts/dr*
livecd: removing /usr/share/consolefonts/g*
livecd: removing /usr/share/consolefonts/i*
livecd: removing /usr/share/consolefonts/k*
livecd: removing /usr/share/consolefonts/l*
livecd: removing /usr/share/consolefonts/r*
livecd: removing /usr/share/consolefonts/s*
livecd: removing /usr/share/consolefonts/t*
livecd: removing /usr/share/consolefonts/v*
livecd: removing /usr/share/misc/*.old
--- Running action sequence: empty
Emptying directory /etc/cron.daily
/etc/cron.hourly not a directory or does not exist, skipping 'empty' operation.
/etc/cron.monthly not a directory or does not exist, skipping 'empty' operation.
/etc/cron.weekly not a directory or does not exist, skipping 'empty' operation.
Emptying directory /etc/logrotate.d
/etc/modules.autoload.d not a directory or does not exist, skipping 'empty' operation.
/etc/runlevels/single not a directory or does not exist, skipping 'empty' operation.
Emptying directory /etc/skel
/lib/dev-state not a directory or does not exist, skipping 'empty' operation.
/lib/udev-state not a directory or does not exist, skipping 'empty' operation.
/lib64/dev-state not a directory or does not exist, skipping 'empty' operation.
/lib64/udev-state not a directory or does not exist, skipping 'empty' operation.
/root/.ccache not a directory or does not exist, skipping 'empty' operation.
Emptying directory /tmp
/usr/diet/include not a directory or does not exist, skipping 'empty' operation.
/usr/diet/man not a directory or does not exist, skipping 'empty' operation.
/usr/i386-gentoo-linux-uclibc not a directory or does not exist, skipping 'empty' operation.
/usr/i386-pc-linux-gnu not a directory or does not exist, skipping 'empty' operation.
/usr/i386-pc-linux-uclibc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/config not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/doc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/etc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/awk not a directory or does not exist, skipping 'empty' operation.
/usr/lib/ccache not a directory or does not exist, skipping 'empty' operation.
/usr/lib/gcc-config not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/lib/gconv
Emptying directory /usr/lib/nfs
/usr/lib/perl5/site_perl not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/lib/portage
/usr/lib/python2.2 not a directory or does not exist, skipping 'empty' operation.
/usr/lib/python2.3 not a directory or does not exist, skipping 'empty' operation.
/usr/lib/python2.4/test not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/config not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/doc not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/etc not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/awk not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/ccache not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/gcc-config not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/gconv not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/nfs not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/perl5/site_perl not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/portage not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.2 not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.3 not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.4/test not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/local
Emptying directory /usr/portage
/usr/powerpc-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
/usr/powerpc64-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/aclocal
Emptying directory /usr/share/baselayout
/usr/share/binutils-data not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/consolefonts/partialfonts
Emptying directory /usr/share/consoletrans
Emptying directory /usr/share/dict
Emptying directory /usr/share/doc
/usr/share/emacs not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/et
Emptying directory /usr/share/gcc-data
/usr/share/genkernel not a directory or does not exist, skipping 'empty' operation.
/usr/share/gettext not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/glib-2.0
/usr/share/gnuconfig not a directory or does not exist, skipping 'empty' operation.
/usr/share/gtk-doc not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/i18n
Emptying directory /usr/share/info
/usr/share/lcms not a directory or does not exist, skipping 'empty' operation.
/usr/share/libtool not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/locale
Emptying directory /usr/share/man
/usr/share/rfc not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/ss
/usr/share/state not a directory or does not exist, skipping 'empty' operation.
/usr/share/texinfo not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/unimaps
Emptying directory /usr/share/zoneinfo
/usr/sparc-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/src
/usr/x86_64-pc-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /var/cache
Emptying directory /var/empty
Emptying directory /var/lib/portage
Emptying directory /var/log
Emptying directory /var/spool
/var/state not a directory or does not exist, skipping 'empty' operation.
Emptying directory /var/tmp
--- Running action sequence: target_setup
Setting up filesystems per filesystem type
Creating squashfs...
Parallel mksquashfs: Using 4 processors
Creating 4.0 filesystem on /home/catalyst/builds/default/livecd-stage2-ia64-20140513//image.squashfs, block size 131072.
\r[/ ] 100/33112 0%\r[- ] 200/33112 0%\r[- ] 300/33112 0%\r[- ] 400/33112 1%\r[=| ] 700/33112 2%\r[=| ] 800/33112 2%\r[=| ] 900/33112 2%\r[==- ] 1200/33112 3%\r[==\ ] 1500/33112 4%\r[===/ ] 1900/33112 5%\r[===/ ] 2000/33112 6%\r[===/ ] 2100/33112 6%\r[====/
] 2700/33112 8%\r[======| ] 3500/33112 10%\r[======| ] 3600/33112 10%\r[======| ] 3700/33112 11%\r[======| ] 3800/33112 11%\r[======| ] 3900/33112 11%\r[=======| ] 4000/33112 12%\r[=======| ] 4100/33112 12%\r[=======| ] 4200/33112 12%\r[=======| ] 4300/33112 12%\r[=======| ] 4400/33112 13%\r[========| ] 4500/33112 13%\r[========| ] 4600/33112
13%\r[========| \0 ] 4700/33112 14%\r[========| ] 4800/33112 14%\r[========| ] 4900/33112 14%\r[========| ] 5000/33112 15%\r[=========| ] 5100/33112 15%\r[=========| ] 5300/33112 16%\r[=========/ ] 5500/33112 16%\r[==========/ ] 5800/33112 17%\r[==========/ ] 5900/33112 17%\r[==========/ ] 6000/33112 18%\r[==========/ ] 6100/33112 18%\r[===========/ ] 6200/33112 18%\r[===========/
] 6300/33112 19%\r[===========/ ] 6400/33112 19%\r[===========/ ] 6500/33112 19%\r[===========/ ] 6600/33112 19%\r[===========/ ] 6700/33112 20%\r[============- ] 6800/33112 20%\r[============- ] 6900/33112 20%\r[============- ] 7000/33112 21%\r[============- ] 7100/33112 21%\r[============- ] 7200/33112 21%\r[=============- ] 7300/33112 22%\r[=============- ] 7400/33112 22%\r[=============- ] 750
0/33112 22%\r[=============- ] 7600/33112 22%\r[=============-\0 ] 7700/33112 23%\r[=============- ] 7800/33112 23%\r[==============- ] 7900/33112 23%\r[==============- ] 8000/33112 24%\r[==============- ] 8100/33112 24%\r[==============- ] 8200/33112 24%\r[===============- ] 8500/33112 25%\r[===============\ ] 8700/33112 26%\r[===============\ ] 8800/33112 26%\r[===============\ ] 8900/33112 26%\r[================| ] 9400/33112 28%\r[================|
] 9500/33112 28%\r[=================| ] 9600/33112 28%\r[=================/ ] 9700/33112 29%\r[=================/ ] 9800/33112 29%\r[=================/ ] 9900/33112 29%\r[=================/ ] 10000/33112 30%\r[=================/ ] 10100/33112 30%\r[==================/ ] 10200/33112 30%\r[==================/ ] 10300/33112 31%\r[==================/ ] 10400/33112 31%\r[==================/ ] 10500/33112 31%\r[==================/ ] 10600/33112 32%\r[===================/
] 10700/33112 32%\r[===================/ ] 10800/33112 32%\r[===================/ ] \010900/33112 32%\r[===================/ ] 11000/33112 33%\r[===================/ ] 11100/33112 33%\r[===================/ ] 11200/33112 33%\r[====================/ ] 11600/33112 35%\r[=====================- ] 11800/33112 35%\r[=====================- ] 11900/33112 35%\r[=====================- ] 12100/33112 36%\r[=====================- ] 12300/33112 37%\r[======================- ] 12500/33112 37%\r[======================- ] 12600/33112 38%\r[===============
=======- ] 12900/33112 38%\r[=======================- ] 13000/33112 39%\r[=======================- ] 13100/33112 39%\r[=======================- ] 13200/33112 39%\r[========================\ ] 13700/33112 41%\r[========================\ ] 13800/33112 41%\r[========================\ ] 13900/33112 41%\r[========================\ ] 14000/33112 42%\r[=========================/ ] 14300/33112 43%\r[==========================/ ] 14700/33112 44%\r[==========================| ] 15100/33112 45%\r[===========================| ] 15200/33112 45%\r[===========================/
] 15500/33112 46%\r[===========================/ ] 15600/33112 47%\r[=============================- ] 16500/33112 49%\r[=============================-\0 ] 16600/33112 50%\r[=============================- ] 16700/33112 50%\r[=============================- ] 16800/33112 50%\r[==============================\ ] 16900/33112 51%\r[==============================\ ] 17000/33112 51%\r[==============================\ ] 17200/33112 51%\r[==============================\ ] 17300/33112 52%\r[===============================\ ] 17400/33112 52%\r[===============================\ ] 17500/33112 52%\r[===============================\ ] 17600/33112 53%\r[========
=======================| ] 17700/33112 53%\r[===============================| ] 17900/33112 54%\r[================================| ] 18000/33112 54%\r[================================| ] 18300/33112 55%\r[================================| ] 18400/33112 55%\r[================================| ] 18500/33112 55%\r[=================================| ] 18600/33112 56%\r[=================================| ] 18700/33112 56%\r[=================================| ] 18800/33112 56%\r[=================================| ] 18900/33112 57%\r[=================================| ] 19000/33112 57%\r[==================================/ ] 19100/33112 57%\r[==================================/
] 19200/33112 57%\r[==================================/ ] 19300/33112 58%\r[==================================/ ] 19400/33112 58%\r[==================================/ ] 19500/33112 58%\0\r[===================================/ ] 19900/33112 60%\r[===================================/ ] 20000/33112 60%\r[===================================/ ] 20200/33112 61%\r[====================================- ] 20300/33112 61%\r[====================================- ] 20400/33112 61%\r[====================================- ] 20600/33112 62%\r[====================================- ] 20700/33112 62%\r[=====================================- ] 20800/33112 62%\r[======================================- ] 21500/33112 64%\r[=
=====================================- ] 21600/33112 65%\r[======================================- ] 21700/33112 65%\r[=======================================- ] 22000/33112 66%\r[=======================================- ] 22100/33112 66%\r[=======================================\ ] 22200/33112 67%\r[=======================================\ ] 22300/33112 67%\r[=======================================\ ] 22400/33112 67%\r[========================================\ ] 22500/33112 67%\r[========================================\ ] 22600/33112 68%\r[========================================\ ] 22700/33112 68%\r[========================================/ ] 22900/33112 69%\r[========================================- ] 23000/33112 69%\r[======================================
===- ] 23100/33112 69%\r[=========================================\ ] 23300/33112 70%\r[==========================================\ ] 23700/33112 71%\r[==========================================\ ] 23800/33112 71%\r[==========================================\ \0 ] 23900/33112 72%\r[==========================================\ ] 24000/33112 72%\r[==========================================\ ] 24100/33112 72%\r[===========================================\ ] 24200/33112 73%\r[===========================================\ ] 24300/33112 73%\r[===========================================\ ] 24400/33112 73%\r[===========================================\ ] 24500/33112 73%\r[============================================\ ] 24700/33112 74%\r[============================================\ ] 24800/33112
74%\r[============================================| ] 24900/33112 75%\r[============================================| ] 25000/33112 75%\r[============================================| ] 25100/33112 75%\r[============================================| ] 25200/33112 76%\r[=============================================| ] 25300/33112 76%\r[=============================================| ] 25400/33112 76%\r[=============================================| ] 25500/33112 77%\r[=============================================| ] 25600/33112 77%\r[=============================================| ] 25700/33112 77%\r[=============================================| ] 25800/33112 77%\r[==============================================| ] 25900/33112 78%\r[==============================================| ] 26000/33112 78%\r[===============================
===============| ] 26100/33112 78%\r[==============================================| ] 26200/33112 79%\r[==============================================| ] 26300/33112 79%\r[===============================================| ] 26400/33112 79%\r[===============================================| ] 26500/33112 80%\r[==============\0=================================| ] 26600/33112 80%\r[===============================================| ] 26700/33112 80%\r[===============================================| ] 26900/33112 81%\r[================================================| ] 27000/33112 81%\r[================================================| ] 27300/33112 82%\r[================================================| ] 27400/33112 82%\r[=================================================| ] 27500/33112 83%\r[=================================================/ ] 27800
/33112 83%\r[=================================================/ ] 27900/33112 84%\r[=================================================/ ] 28000/33112 84%\r[==================================================/ ] 28100/33112 84%\r[==================================================/ ] 28200/33112 85%\r[==================================================/ ] 28300/33112 85%\r[==================================================/ ] 28400/33112 85%\r[==================================================/ ] 28600/33112 86%\r[===================================================/ ] 28700/33112 86%\r[===================================================/ ] 28800/33112 86%\r[===================================================/ ] 28900/33112 87%\r[===================================================/ ] 29000/33112 87%\r[===================================================/ ] 29100/33112 87%\r[========================
============================/ ] 29300/33112 88%\r[====================================================/ ] 29400/33112 88%\r[====================================================/ ] 29500/33112 89%\r[====================================================/ ] 29600/33112 89%\r[====================================================/ ] 29700/33112 89%\r[=====================================================/ ] \029800/33112 89%\r[=====================================================/ ] 29900/33112 90%\r[=====================================================/ ] 30000/33112 90%\r[=====================================================/ ] 30100/33112 90%\r[=====================================================/ ] 30200/33112 91%\r[=====================================================/ ] 30300/33112 91%\r[======================================================/ ] 30400/33112 91%\r[======================================================/
] 30500/33112 92%\r[======================================================- ] 30600/33112 92%\r[======================================================- ] 30700/33112 92%\r[======================================================- ] 30800/33112 93%\r[=======================================================- ] 30900/33112 93%\r[=========================================================\ ] 32100/33112 96%\r[=========================================================\ ] 32200/33112 97%\r[=========================================================\ ] 32300/33112 97%\r[=========================================================\ ] 32400/33112 97%\r[=========================================================\ ] 32500/33112 98%\r[==========================================================\ ] 32600/33112 98%\r[==========================================================\ ] 32700/33112 98%\r[==========================================================\ ] 32800/33112 99%\r[=================
=========================================\ ] 33000/33112 99%\r[==========================================================\ ] 33100/33112 99%\r[===========================================================\] 33112/33112 100%
Exportable Squashfs 4.0 filesystem, gzip compressed, data block size 131072
compressed data, compressed metadata, compressed fragments, no xattrs
duplicates are removed
Filesystem size 165924.50 Kbytes (162.04 Mbytes)
25.06% of uncompressed filesystem size (662234.97 Kbytes)
Inode table size 339605 bytes (331.65 Kbytes)
28.39% of uncompressed inode table size (1196059 bytes)
Directory table size 324276 bytes (316.68 Kbytes)
44.30% of uncompressed directory table size (731942 bytes)
Number of duplicate files found 4047
Number of inodes 35279
Number of files 29949
Number of fragments 1803
Number of symbolic links 2664
Number of device nodes 271
Number of fifo nodes 0
Number of socket nodes 0
Number of directories 2395
Number of ids (unique uids + gids) 12
Number of uids 4
root (0)
man (13)
nobody (65534)
ntp (123)
Number of gids 10
root (0)
disk (6)
kmem (9)
tty (5)
unknown (248)
wheel (10)
utmp (406)
unknown (249)
portage (250)
ntp (123)
--- Running action sequence: setup_overlay
--- Running action sequence: create_iso
17500+0 records in
17500+0 records out
17920000 bytes (18 MB) copied, 0.109495 s, 164 MB/s
mkfs.fat 3.0.22 (2013-07-19)
>> Populating EFI image...
'/home/catalyst/builds/default/livecd-stage2-ia64-20140513//boot/System.map-gentoo' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140513//gentoo.efimg.mountPoint/System.map-gentoo'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140513//boot/efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140513//gentoo.efimg.mountPoint/efi'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140513//boot/efi/boot' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140513//gentoo.efimg.mountPoint/efi/boot'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140513//boot/efi/boot/gentoo.igz' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140513//gentoo.efimg.mountPoint/efi/boot/gentoo.igz'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140513//boot/efi/boot/bootia64.efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140513//gentoo.efimg.mountPoint/efi/boot/bootia64.efi'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140513//boot/efi/boot/elilo.msg' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140513//gentoo.efimg.mountPoint/efi/boot/elilo.msg'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140513//boot/efi/boot/gentoo' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140513//gentoo.efimg.mountPoint/efi/boot/gentoo'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140513//boot/efi/boot/elilo.conf' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140513//gentoo.efimg.mountPoint/efi/boot/elilo.conf'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140513//boot/elilo.conf' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140513//gentoo.efimg.mountPoint/elilo.conf'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140513//boot/elilo.efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140513//gentoo.efimg.mountPoint/elilo.efi'
>> Removing /boot...
>> Running mkisofs to create iso image....
>> mkisofs -R -l -b gentoo.efimg -c boot.cat -no-emul-boot -J -V "Gentoo Linux IA64 20140513" -o /var/tmp/catalyst/builds/default/install-ia64-minimal-20140513.iso /home/catalyst/builds/default/livecd-stage2-ia64-20140513/
mkisofs: No such file or directory. Unable to open disc image file '/var/tmp/catalyst/builds/default/install-ia64-minimal-20140513.iso'.
Cannot make ISO image
!!! catalyst: ISO creation script failed.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1303, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1376, in create_iso
env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/livecd-stage2-ia64-20140513/.catalyst_lock'
Full build log at /tmp/catalyst-auto.10811/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2014-05-06 12:58 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2014-05-06 12:58 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
livecd: removing /usr/lib*/perl5/site_perl
livecd: removing /usr/lib*/gcc-lib/*/*/libgcj*
livecd: removing /usr/sbin/archive-conf
livecd: removing /usr/sbin/dispatch-conf
livecd: removing /usr/sbin/emaint
livecd: removing /usr/sbin/emerge-webrsync
livecd: removing /usr/sbin/env-update
livecd: removing /usr/sbin/fb*
livecd: removing /usr/sbin/fixpackages
livecd: removing /usr/sbin/quickpkg
livecd: removing /usr/sbin/regenworld
livecd: removing /usr/share/consolefonts/1*
livecd: removing /usr/share/consolefonts/7*
livecd: removing /usr/share/consolefonts/8*
livecd: removing /usr/share/consolefonts/9*
livecd: removing /usr/share/consolefonts/A*
livecd: removing /usr/share/consolefonts/C*
livecd: removing /usr/share/consolefonts/E*
livecd: removing /usr/share/consolefonts/G*
livecd: removing /usr/share/consolefonts/L*
livecd: removing /usr/share/consolefonts/M*
livecd: removing /usr/share/consolefonts/R*
livecd: removing /usr/share/consolefonts/a*
livecd: removing /usr/share/consolefonts/c*
livecd: removing /usr/share/consolefonts/dr*
livecd: removing /usr/share/consolefonts/g*
livecd: removing /usr/share/consolefonts/i*
livecd: removing /usr/share/consolefonts/k*
livecd: removing /usr/share/consolefonts/l*
livecd: removing /usr/share/consolefonts/r*
livecd: removing /usr/share/consolefonts/s*
livecd: removing /usr/share/consolefonts/t*
livecd: removing /usr/share/consolefonts/v*
livecd: removing /usr/share/misc/*.old
--- Running action sequence: empty
Emptying directory /etc/cron.daily
/etc/cron.hourly not a directory or does not exist, skipping 'empty' operation.
/etc/cron.monthly not a directory or does not exist, skipping 'empty' operation.
/etc/cron.weekly not a directory or does not exist, skipping 'empty' operation.
Emptying directory /etc/logrotate.d
/etc/modules.autoload.d not a directory or does not exist, skipping 'empty' operation.
/etc/runlevels/single not a directory or does not exist, skipping 'empty' operation.
Emptying directory /etc/skel
/lib/dev-state not a directory or does not exist, skipping 'empty' operation.
/lib/udev-state not a directory or does not exist, skipping 'empty' operation.
/lib64/dev-state not a directory or does not exist, skipping 'empty' operation.
/lib64/udev-state not a directory or does not exist, skipping 'empty' operation.
/root/.ccache not a directory or does not exist, skipping 'empty' operation.
Emptying directory /tmp
/usr/diet/include not a directory or does not exist, skipping 'empty' operation.
/usr/diet/man not a directory or does not exist, skipping 'empty' operation.
/usr/i386-gentoo-linux-uclibc not a directory or does not exist, skipping 'empty' operation.
/usr/i386-pc-linux-gnu not a directory or does not exist, skipping 'empty' operation.
/usr/i386-pc-linux-uclibc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/config not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/doc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/etc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/awk not a directory or does not exist, skipping 'empty' operation.
/usr/lib/ccache not a directory or does not exist, skipping 'empty' operation.
/usr/lib/gcc-config not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/lib/gconv
Emptying directory /usr/lib/nfs
/usr/lib/perl5/site_perl not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/lib/portage
/usr/lib/python2.2 not a directory or does not exist, skipping 'empty' operation.
/usr/lib/python2.3 not a directory or does not exist, skipping 'empty' operation.
/usr/lib/python2.4/test not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/config not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/doc not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/etc not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/awk not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/ccache not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/gcc-config not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/gconv not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/nfs not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/perl5/site_perl not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/portage not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.2 not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.3 not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.4/test not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/local
Emptying directory /usr/portage
/usr/powerpc-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
/usr/powerpc64-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/aclocal
Emptying directory /usr/share/baselayout
/usr/share/binutils-data not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/consolefonts/partialfonts
Emptying directory /usr/share/consoletrans
Emptying directory /usr/share/dict
Emptying directory /usr/share/doc
/usr/share/emacs not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/et
Emptying directory /usr/share/gcc-data
/usr/share/genkernel not a directory or does not exist, skipping 'empty' operation.
/usr/share/gettext not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/glib-2.0
/usr/share/gnuconfig not a directory or does not exist, skipping 'empty' operation.
/usr/share/gtk-doc not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/i18n
Emptying directory /usr/share/info
/usr/share/lcms not a directory or does not exist, skipping 'empty' operation.
/usr/share/libtool not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/locale
Emptying directory /usr/share/man
/usr/share/rfc not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/ss
/usr/share/state not a directory or does not exist, skipping 'empty' operation.
/usr/share/texinfo not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/unimaps
Emptying directory /usr/share/zoneinfo
/usr/sparc-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/src
/usr/x86_64-pc-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /var/cache
Emptying directory /var/empty
Emptying directory /var/lib/portage
Emptying directory /var/log
Emptying directory /var/spool
/var/state not a directory or does not exist, skipping 'empty' operation.
Emptying directory /var/tmp
--- Running action sequence: target_setup
Setting up filesystems per filesystem type
Creating squashfs...
Parallel mksquashfs: Using 4 processors
Creating 4.0 filesystem on /home/catalyst/builds/default/livecd-stage2-ia64-20140506//image.squashfs, block size 131072.
\r[- ] 200/33119 0%\r[- ] 300/33119 0%\r[=| ] 800/33119 2%\r[=| ] 900/33119 2%\r[==\ ] 1500/33119 4%\r[===/ ] 2100/33119 6%\r[===\ ] 2200/33119 6%\r[======| ] 3600/33119 10%\r[======| ] 3700/33119 11%\r[======| ] 3800/33119 11%\r[======| ] 3900/33119 11%\r[=======| ] 4000/33119 12%\r[=======|
] 4100/33119 12%\r[=======| ] 4200/33119 12%\r[=======| ] 4300/33119 12%\r[=======| ] 4400/33119 13%\r[========| ] 4500/33119 13%\r[========/ ] 4600/33119 13%\r[========/ ] 4700/33119 14%\r[========/ ] 4800/33119 14%\r[========/ ] 4900/33119 14%\r[=========/ ] 5100/33119 15%\r[=========/ ] 5200/33119 15%\r[=========/ ] 5300/33119 16%\r[=========/ ] 5500/33119
16%\r[==========- \0 ] 5800/33119 17%\r[==========- ] 5900/33119 17%\r[==========- ] 6100/33119 18%\r[===========- ] 6200/33119 18%\r[===========- ] 6300/33119 19%\r[===========- ] 6400/33119 19%\r[===========- ] 6500/33119 19%\r[===========- ] 6600/33119 19%\r[===========- ] 6700/33119 20%\r[============- ] 6800/33119 20%\r[============- ] 6900/33119 20%\r[============- ] 7000/33119 21%\r[============-
] 7100/33119 21%\r[============- ] 7200/33119 21%\r[=============\ ] 7300/33119 22%\r[=============\ ] 7400/33119 22%\r[=============\ ] 7500/33119 22%\r[=============\ ] 7600/33119 22%\r[=============\ ] 7700/33119 23%\r[=============\ ] 7800/33119 23%\r[==============\ ] 7900/33119 23%\r[==============\ ] 8000/33119 24%\r[==============\ ] 8100/33119 24%\r[==============\ ] 8200/33119 24%\r[===============\ ] 870
0/33119 26%\r[===============\ ] 8900/33119 26%\r[==============\0==| ] 9000/33119 27%\r[================/ ] 9500/33119 28%\r[=================/ ] 9600/33119 28%\r[=================/ ] 9700/33119 29%\r[=================/ ] 9800/33119 29%\r[=================/ ] 9900/33119 29%\r[=================/ ] 10000/33119 30%\r[=================/ ] 10100/33119 30%\r[==================/ ] 10200/33119 30%\r[==================/ ] 10300/33119 31%\r[==================- ] 10400/33119 31%\r[==================-
] 10500/33119 31%\r[==================- ] 10600/33119 32%\r[===================- ] 10700/33119 32%\r[===================- ] 10800/33119 32%\r[===================- ] 10900/33119 32%\r[===================- ] 11000/33119 33%\r[===================- ] 11100/33119 33%\r[===================- ] 11200/33119 33%\r[====================- ] 11300/33119 34%\r[====================- ] 11400/33119 34%\r[====================- ] 11500/33119 34%\r[====================- ] 11600/33119 35%\r[====================-
] 11700/33119 35%\r[=====================- ] 11800/33119 35%\r[=====================- ] \011900/33119 35%\r[=====================- ] 12000/33119 36%\r[=====================- ] 12300/33119 37%\r[======================- ] 12400/33119 37%\r[======================\ ] 12500/33119 37%\r[======================\ ] 12600/33119 38%\r[======================\ ] 12700/33119 38%\r[======================\ ] 12900/33119 38%\r[=======================\ ] 13000/33119 39%\r[=======================\ ] 13100/33119 39%\r[=======================\ ] 13200/33119 39%\r[===============
========\ ] 13300/33119 40%\r[=======================\ ] 13400/33119 40%\r[========================\ ] 13500/33119 40%\r[========================\ ] 13600/33119 41%\r[========================\ ] 13700/33119 41%\r[========================\ ] 13800/33119 41%\r[========================| ] 13900/33119 41%\r[========================| ] 14000/33119 42%\r[=========================| ] 14100/33119 42%\r[=========================/ ] 14200/33119 42%\r[=========================- ] 14300/33119 43%\r[==========================/ ] 15100/33119 45%\r[===========================/
] 15200/33119 45%\r[===========================/ ] 15500/33119 46%\r[===========================/ ] 15600/33119 47%\r[============================- \0 ] 16200/33119 48%\r[=============================| ] 16300/33119 49%\r[=============================| ] 16400/33119 49%\r[=============================/ ] 16500/33119 49%\r[=============================/ ] 16600/33119 50%\r[=============================/ ] 16700/33119 50%\r[=============================/ ] 16800/33119 50%\r[==============================/ ] 17000/33119 51%\r[==============================/ ] 17300/33119 52%\r[===============================- ] 17700/33119 53%\r[========
=======================- ] 17800/33119 53%\r[===============================- ] 17900/33119 54%\r[================================- ] 18000/33119 54%\r[================================| ] 18100/33119 54%\r[================================- ] 18200/33119 54%\r[================================- ] 18300/33119 55%\r[================================- ] 18400/33119 55%\r[================================- ] 18500/33119 55%\r[=================================- ] 18600/33119 56%\r[=================================- ] 18700/33119 56%\r[=================================\ ] 18900/33119 57%\r[=================================\ ] 19000/33119 57%\r[==================================\
] 19100/33119 57%\r[==================================\ ] 19200/33119 57%\r[==================================\ ] 19300/33119 58%\r[==================================\ ] 19400/33119 58%\0\r[==================================\ ] 19500/33119 58%\r[===================================\ ] 19800/33119 59%\r[===================================\ ] 19900/33119 60%\r[===================================\ ] 20000/33119 60%\r[====================================| ] 20300/33119 61%\r[====================================| ] 20500/33119 61%\r[=====================================/ ] 20800/33119 62%\r[======================================/ ] 21500/33119 64%\r[======================================/ ] 21600/33119 65%\r[=
=====================================/ ] 21700/33119 65%\r[======================================/ ] 21800/33119 65%\r[=======================================/ ] 21900/33119 66%\r[=======================================/ ] 22000/33119 66%\r[=======================================/ ] 22100/33119 66%\r[=======================================/ ] 22200/33119 67%\r[========================================/ ] 22500/33119 67%\r[========================================/ ] 22600/33119 68%\r[========================================| ] 22900/33119 69%\r[========================================| ] 23000/33119 69%\r[=========================================| ] 23100/33119 69%\r[=========================================/ ] 23300/33119 70%\r[======================================
===/ ] 23400/33119 70%\r[==========================================/ ] 23700/33119 71%\r[==========================================/ ] 23800/33119 71%\r[==========================================/ ] 23900/33119 72%\r[==========================================/ \0 ] 24000/33119 72%\r[==========================================/ ] 24100/33119 72%\r[===========================================/ ] 24200/33119 73%\r[===========================================/ ] 24300/33119 73%\r[===========================================/ ] 24400/33119 73%\r[===========================================/ ] 24500/33119 73%\r[============================================- ] 24700/33119 74%\r[============================================- ] 24800/33119 74%\r[============================================- ] 24900/33119
75%\r[============================================- ] 25000/33119 75%\r[============================================- ] 25100/33119 75%\r[============================================- ] 25200/33119 76%\r[=============================================- ] 25300/33119 76%\r[=============================================- ] 25400/33119 76%\r[=============================================- ] 25500/33119 76%\r[=============================================- ] 25600/33119 77%\r[=============================================- ] 25700/33119 77%\r[=============================================- ] 25800/33119 77%\r[==============================================- ] 25900/33119 78%\r[==============================================- ] 26000/33119 78%\r[==============================================- ] 26100/33119 78%\r[===============================
===============- ] 26200/33119 79%\r[==============================================- ] 26300/33119 79%\r[===============================================- ] 26400/33119 79%\r[===============================================- ] 26500/33119 80%\r[===============================================- ] 26600/33119 80%\r[==============\0=================================- ] 26900/33119 81%\r[================================================- ] 27000/33119 81%\r[================================================\ ] 27100/33119 81%\r[================================================\ ] 27200/33119 82%\r[================================================\ ] 27300/33119 82%\r[================================================\ ] 27400/33119 82%\r[================================================\ ] 27500/33119 83%\r[=================================================\ ] 27600
/33119 83%\r[=================================================\ ] 27900/33119 84%\r[=================================================\ ] 28000/33119 84%\r[==================================================\ ] 28100/33119 84%\r[==================================================\ ] 28200/33119 85%\r[==================================================\ ] 28300/33119 85%\r[==================================================\ ] 28400/33119 85%\r[==================================================\ ] 28500/33119 86%\r[==================================================\ ] 28600/33119 86%\r[===================================================\ ] 28700/33119 86%\r[===================================================\ ] 28800/33119 86%\r[===================================================\ ] 28900/33119 87%\r[===================================================\ ] 29000/33119 87%\r[========================
===========================| ] 29100/33119 87%\r[====================================================| ] 29200/33119 88%\r[====================================================| ] 29300/33119 88%\r[====================================================| ] 29400/33119 88%\r[====================================================| ] 29500/33119 89%\r[====================================================| ] \029600/33119 89%\r[====================================================| ] 29700/33119 89%\r[=====================================================| ] 29800/33119 89%\r[=====================================================| ] 29900/33119 90%\r[=====================================================| ] 30000/33119 90%\r[=====================================================| ] 30100/33119 90%\r[=====================================================| ] 30200/33119 91%\r[=====================================================|
] 30300/33119 91%\r[======================================================| ] 30400/33119 91%\r[======================================================| ] 30500/33119 92%\r[======================================================| ] 30600/33119 92%\r[======================================================| ] 30700/33119 92%\r[======================================================| ] 30800/33119 92%\r[=======================================================| ] 30900/33119 93%\r[=======================================================| ] 31200/33119 94%\r[=======================================================| ] 31300/33119 94%\r[=======================================================| ] 31400/33119 94%\r[========================================================| ] 31500/33119 95%\r[========================================================/ ] 31600/33119 95%\r[========================================================/ ] 31700/33119 95%\r[=================
=======================================/ ] 31800/33119 96%\r[========================================================/ ] 31900/33119 96%\r[=========================================================/ ] 32000/33119 96%\r[=========================================================/ ] 32100/33119 96%\r[=========================================================/ ] 32200/33119 97%\r[=========================================================/ ] 32300/33119 97%\r[==============================\0===========================/ ] 32400/33119 97%\r[=========================================================- ] 32500/33119 98%\r[==========================================================- ] 32600/33119 98%\r[==========================================================- ] 32700/33119 98%\r[==========================================================- ] 32800/33119 99%\r[==========================================================- ] 32900/33119 99%\r[=====================================================
=====- ] 33000/33119 99%\r[==========================================================- ] 33100/33119 99%\r[===========================================================-] 33119/33119 100%
Exportable Squashfs 4.0 filesystem, gzip compressed, data block size 131072
compressed data, compressed metadata, compressed fragments, no xattrs
duplicates are removed
Filesystem size 165926.74 Kbytes (162.04 Mbytes)
25.06% of uncompressed filesystem size (662249.88 Kbytes)
Inode table size 340086 bytes (332.12 Kbytes)
28.43% of uncompressed inode table size (1196283 bytes)
Directory table size 324429 bytes (316.83 Kbytes)
44.32% of uncompressed directory table size (732028 bytes)
Number of duplicate files found 4052
Number of inodes 35286
Number of files 29956
Number of fragments 1803
Number of symbolic links 2664
Number of device nodes 271
Number of fifo nodes 0
Number of socket nodes 0
Number of directories 2395
Number of ids (unique uids + gids) 12
Number of uids 4
root (0)
man (13)
nobody (65534)
ntp (123)
Number of gids 10
root (0)
disk (6)
kmem (9)
tty (5)
unknown (248)
wheel (10)
utmp (406)
unknown (249)
portage (250)
ntp (123)
--- Running action sequence: setup_overlay
--- Running action sequence: create_iso
17500+0 records in
17500+0 records out
17920000 bytes (18 MB) copied, 0.112525 s, 159 MB/s
mkfs.fat 3.0.22 (2013-07-19)
>> Populating EFI image...
'/home/catalyst/builds/default/livecd-stage2-ia64-20140506//boot/System.map-gentoo' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140506//gentoo.efimg.mountPoint/System.map-gentoo'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140506//boot/efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140506//gentoo.efimg.mountPoint/efi'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140506//boot/efi/boot' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140506//gentoo.efimg.mountPoint/efi/boot'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140506//boot/efi/boot/gentoo.igz' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140506//gentoo.efimg.mountPoint/efi/boot/gentoo.igz'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140506//boot/efi/boot/bootia64.efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140506//gentoo.efimg.mountPoint/efi/boot/bootia64.efi'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140506//boot/efi/boot/elilo.msg' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140506//gentoo.efimg.mountPoint/efi/boot/elilo.msg'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140506//boot/efi/boot/gentoo' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140506//gentoo.efimg.mountPoint/efi/boot/gentoo'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140506//boot/efi/boot/elilo.conf' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140506//gentoo.efimg.mountPoint/efi/boot/elilo.conf'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140506//boot/elilo.conf' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140506//gentoo.efimg.mountPoint/elilo.conf'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140506//boot/elilo.efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140506//gentoo.efimg.mountPoint/elilo.efi'
>> Removing /boot...
>> Running mkisofs to create iso image....
>> mkisofs -R -l -b gentoo.efimg -c boot.cat -no-emul-boot -J -V "Gentoo Linux IA64 20140506" -o /var/tmp/catalyst/builds/default/install-ia64-minimal-20140506.iso /home/catalyst/builds/default/livecd-stage2-ia64-20140506/
mkisofs: No such file or directory. Unable to open disc image file '/var/tmp/catalyst/builds/default/install-ia64-minimal-20140506.iso'.
Cannot make ISO image
!!! catalyst: ISO creation script failed.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1303, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1376, in create_iso
env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/livecd-stage2-ia64-20140506/.catalyst_lock'
Full build log at /tmp/catalyst-auto.8666/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2014-04-29 12:30 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2014-04-29 12:30 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
livecd: removing /usr/lib*/perl5/site_perl
livecd: removing /usr/lib*/gcc-lib/*/*/libgcj*
livecd: removing /usr/sbin/archive-conf
livecd: removing /usr/sbin/dispatch-conf
livecd: removing /usr/sbin/emaint
livecd: removing /usr/sbin/emerge-webrsync
livecd: removing /usr/sbin/env-update
livecd: removing /usr/sbin/fb*
livecd: removing /usr/sbin/fixpackages
livecd: removing /usr/sbin/quickpkg
livecd: removing /usr/sbin/regenworld
livecd: removing /usr/share/consolefonts/1*
livecd: removing /usr/share/consolefonts/7*
livecd: removing /usr/share/consolefonts/8*
livecd: removing /usr/share/consolefonts/9*
livecd: removing /usr/share/consolefonts/A*
livecd: removing /usr/share/consolefonts/C*
livecd: removing /usr/share/consolefonts/E*
livecd: removing /usr/share/consolefonts/G*
livecd: removing /usr/share/consolefonts/L*
livecd: removing /usr/share/consolefonts/M*
livecd: removing /usr/share/consolefonts/R*
livecd: removing /usr/share/consolefonts/a*
livecd: removing /usr/share/consolefonts/c*
livecd: removing /usr/share/consolefonts/dr*
livecd: removing /usr/share/consolefonts/g*
livecd: removing /usr/share/consolefonts/i*
livecd: removing /usr/share/consolefonts/k*
livecd: removing /usr/share/consolefonts/l*
livecd: removing /usr/share/consolefonts/r*
livecd: removing /usr/share/consolefonts/s*
livecd: removing /usr/share/consolefonts/t*
livecd: removing /usr/share/consolefonts/v*
livecd: removing /usr/share/misc/*.old
--- Running action sequence: empty
Emptying directory /etc/cron.daily
/etc/cron.hourly not a directory or does not exist, skipping 'empty' operation.
/etc/cron.monthly not a directory or does not exist, skipping 'empty' operation.
/etc/cron.weekly not a directory or does not exist, skipping 'empty' operation.
Emptying directory /etc/logrotate.d
/etc/modules.autoload.d not a directory or does not exist, skipping 'empty' operation.
/etc/runlevels/single not a directory or does not exist, skipping 'empty' operation.
Emptying directory /etc/skel
/lib/dev-state not a directory or does not exist, skipping 'empty' operation.
/lib/udev-state not a directory or does not exist, skipping 'empty' operation.
/lib64/dev-state not a directory or does not exist, skipping 'empty' operation.
/lib64/udev-state not a directory or does not exist, skipping 'empty' operation.
/root/.ccache not a directory or does not exist, skipping 'empty' operation.
Emptying directory /tmp
/usr/diet/include not a directory or does not exist, skipping 'empty' operation.
/usr/diet/man not a directory or does not exist, skipping 'empty' operation.
/usr/i386-gentoo-linux-uclibc not a directory or does not exist, skipping 'empty' operation.
/usr/i386-pc-linux-gnu not a directory or does not exist, skipping 'empty' operation.
/usr/i386-pc-linux-uclibc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/config not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/doc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/etc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/awk not a directory or does not exist, skipping 'empty' operation.
/usr/lib/ccache not a directory or does not exist, skipping 'empty' operation.
/usr/lib/gcc-config not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/lib/gconv
Emptying directory /usr/lib/nfs
/usr/lib/perl5/site_perl not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/lib/portage
/usr/lib/python2.2 not a directory or does not exist, skipping 'empty' operation.
/usr/lib/python2.3 not a directory or does not exist, skipping 'empty' operation.
/usr/lib/python2.4/test not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/config not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/doc not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/etc not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/awk not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/ccache not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/gcc-config not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/gconv not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/nfs not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/perl5/site_perl not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/portage not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.2 not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.3 not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.4/test not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/local
Emptying directory /usr/portage
/usr/powerpc-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
/usr/powerpc64-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/aclocal
Emptying directory /usr/share/baselayout
/usr/share/binutils-data not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/consolefonts/partialfonts
Emptying directory /usr/share/consoletrans
Emptying directory /usr/share/dict
Emptying directory /usr/share/doc
/usr/share/emacs not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/et
Emptying directory /usr/share/gcc-data
/usr/share/genkernel not a directory or does not exist, skipping 'empty' operation.
/usr/share/gettext not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/glib-2.0
/usr/share/gnuconfig not a directory or does not exist, skipping 'empty' operation.
/usr/share/gtk-doc not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/i18n
Emptying directory /usr/share/info
/usr/share/lcms not a directory or does not exist, skipping 'empty' operation.
/usr/share/libtool not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/locale
Emptying directory /usr/share/man
/usr/share/rfc not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/ss
/usr/share/state not a directory or does not exist, skipping 'empty' operation.
/usr/share/texinfo not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/unimaps
Emptying directory /usr/share/zoneinfo
/usr/sparc-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/src
/usr/x86_64-pc-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /var/cache
Emptying directory /var/empty
Emptying directory /var/lib/portage
Emptying directory /var/log
Emptying directory /var/spool
/var/state not a directory or does not exist, skipping 'empty' operation.
Emptying directory /var/tmp
--- Running action sequence: target_setup
Setting up filesystems per filesystem type
Creating squashfs...
Parallel mksquashfs: Using 4 processors
Creating 4.0 filesystem on /home/catalyst/builds/default/livecd-stage2-ia64-20140429//image.squashfs, block size 131072.
\r[- ] 200/33120 0%\r[- ] 300/33120 0%\r[\ ] 400/33120 1%\r[| ] 500/33120 1%\r[=| ] 700/33120 2%\r[=| ] 800/33120 2%\r[==/ ] 1400/33120 4%\r[==\ ] 1500/33120 4%\r[===| ] 2000/33120 6%\r[===| ] 2100/33120 6%\r[======| ] 3600/33120 10%\r[======| ] 3700/33120 11%\r[======|
] 3800/33120 11%\r[======| ] 3900/33120 11%\r[=======| ] 4000/33120 12%\r[=======| ] 4100/33120 12%\r[=======| ] 4200/33120 12%\r[=======| ] 4300/33120 12%\r[=======| ] 4400/33120 13%\r[========| ] 4500/33120 13%\r[========| ] 4600/33120 13%\r[========| ] 4700/33120 14%\r[========| ] 4800/33120 14%\r[========| ] 5000/33120 15%\r[=========/ ] 5200/33120
15%\r[=========/ \0 ] 5300/33120 16%\r[=========/ ] 5600/33120 16%\r[==========/ ] 5700/33120 17%\r[==========/ ] 5800/33120 17%\r[==========/ ] 5900/33120 17%\r[==========/ ] 6100/33120 18%\r[===========/ ] 6200/33120 18%\r[===========/ ] 6300/33120 19%\r[===========/ ] 6400/33120 19%\r[===========/ ] 6500/33120 19%\r[===========/ ] 6600/33120 19%\r[===========- ] 6700/33120 20%\r[============-
] 6800/33120 20%\r[============- ] 7000/33120 21%\r[============- ] 7100/33120 21%\r[============- ] 7200/33120 21%\r[=============- ] 7300/33120 22%\r[=============- ] 7400/33120 22%\r[=============- ] 7500/33120 22%\r[=============- ] 7600/33120 22%\r[=============- ] 7700/33120 23%\r[=============- ] 7800/33120 23%\r[==============- ] 7900/33120 23%\r[==============- ] 8000/33120 24%\r[==============- ] 810
0/33120 24%\r[==============- ] 8200/33120 24%\r[==============\0\ ] 8400/33120 25%\r[===============\ ] 8500/33120 25%\r[===============\ ] 8600/33120 25%\r[===============\ ] 8700/33120 26%\r[===============\ ] 8800/33120 26%\r[===============\ ] 8900/33120 26%\r[=================| ] 9600/33120 28%\r[=================/ ] 10000/33120 30%\r[==================/ ] 10300/33120 31%\r[==================/ ] 10600/33120 32%\r[===================/ ] 10700/33120 32%\r[===================/
] 10800/33120 32%\r[===================/ ] 10900/33120 32%\r[===================/ ] 11000/33120 33%\r[===================/ ] 11100/33120 33%\r[====================/ ] 11300/33120 34%\r[====================/ ] 11400/33120 34%\r[====================/ ] 11500/33120 34%\r[====================/ ] 11600/33120 35%\r[=====================- ] 11800/33120 35%\r[=====================- ] 12000/33120 36%\r[=====================- ] 12100/33120 36%\r[======================- ] 12400/33120 37%\r[======================-
] 12500/33120 37%\r[======================- ] 12600/33120 38%\r[======================- ] \012700/33120 38%\r[=======================- ] 13000/33120 39%\r[=======================- ] 13100/33120 39%\r[=======================\ ] 13400/33120 40%\r[========================\ ] 13500/33120 40%\r[========================\ ] 13600/33120 41%\r[========================\ ] 13700/33120 41%\r[========================\ ] 13900/33120 41%\r[========================\ ] 14000/33120 42%\r[=========================| ] 14200/33120 42%\r[=========================/ ] 14300/33120 43%\r[===============
===========| ] 15000/33120 45%\r[==========================| ] 15100/33120 45%\r[===========================| ] 15200/33120 45%\r[===========================| ] 15400/33120 46%\r[===========================/ ] 15500/33120 46%\r[===========================/ ] 15600/33120 47%\r[===========================- ] 15700/33120 47%\r[============================- ] 15800/33120 47%\r[============================- ] 15900/33120 48%\r[============================/ ] 16200/33120 48%\r[=============================/ ] 16300/33120 49%\r[=============================- ] 16500/33120 49%\r[=============================-
] 16600/33120 50%\r[=============================- ] 16700/33120 50%\r[=============================- ] 16800/33120 50%\r[==============================\0- ] 17000/33120 51%\r[==============================- ] 17100/33120 51%\r[==============================- ] 17200/33120 51%\r[==============================- ] 17300/33120 52%\r[==============================\ ] 17400/33120 52%\r[===============================\ ] 17600/33120 53%\r[===============================\ ] 17700/33120 53%\r[===============================\ ] 17800/33120 53%\r[===============================\ ] 17900/33120 54%\r[================================| ] 18000/33120 54%\r[========
========================\ ] 18200/33120 54%\r[================================\ ] 18300/33120 55%\r[================================| ] 18400/33120 55%\r[================================| ] 18500/33120 55%\r[=================================| ] 18600/33120 56%\r[=================================| ] 18700/33120 56%\r[=================================| ] 18800/33120 56%\r[=================================| ] 18900/33120 57%\r[=================================| ] 19000/33120 57%\r[==================================| ] 19200/33120 57%\r[==================================| ] 19300/33120 58%\r[==================================| ] 19400/33120 58%\r[==================================|
] 19500/33120 58%\r[===================================| ] 19800/33120 59%\r[===================================/ ] 19900/33120 60%\r[===================================/ ] 20000/33120 60%\0\r[====================================/ ] 20300/33120 61%\r[====================================/ ] 20400/33120 61%\r[====================================- ] 20600/33120 62%\r[====================================- ] 20700/33120 62%\r[=====================================- ] 20800/33120 62%\r[======================================- ] 21500/33120 64%\r[======================================- ] 21600/33120 65%\r[======================================- ] 21700/33120 65%\r[=======================================- ] 22000/33120 66%\r[=
======================================- ] 22100/33120 66%\r[=======================================- ] 22200/33120 67%\r[=======================================- ] 22300/33120 67%\r[=======================================- ] 22400/33120 67%\r[========================================- ] 22500/33120 67%\r[========================================\ ] 22600/33120 68%\r[========================================/ ] 22900/33120 69%\r[========================================/ ] 23000/33120 69%\r[=========================================- ] 23100/33120 69%\r[==========================================\ ] 23700/33120 71%\r[==========================================\ ] 23800/33120 71%\r[==========================================\ ] 23900/33120 72%\r[======================================
====\ ] 24000/33120 72%\r[==========================================\ ] 24100/33120 72%\r[===========================================\ ] 24200/33120 73%\r[===========================================\ ] 24300/33120 73%\r[===========================================\ \0 ] 24500/33120 73%\r[============================================\ ] 24900/33120 75%\r[============================================\ ] 25000/33120 75%\r[============================================\ ] 25100/33120 75%\r[============================================\ ] 25200/33120 76%\r[=============================================| ] 25300/33120 76%\r[=============================================| ] 25400/33120 76%\r[=============================================| ] 25500/33120 76%\r[=============================================| ] 25600/33120
77%\r[=============================================| ] 25700/33120 77%\r[=============================================| ] 25800/33120 77%\r[==============================================| ] 25900/33120 78%\r[==============================================| ] 26000/33120 78%\r[==============================================| ] 26100/33120 78%\r[==============================================| ] 26200/33120 79%\r[==============================================| ] 26300/33120 79%\r[===============================================| ] 26400/33120 79%\r[===============================================| ] 26500/33120 80%\r[===============================================| ] 26600/33120 80%\r[===============================================| ] 26700/33120 80%\r[===============================================| ] 26800/33120 80%\r[===============================
=================| ] 27100/33120 81%\r[================================================| ] 27300/33120 82%\r[=================================================| ] 27700/33120 83%\r[=================================================/ ] 27800/33120 83%\r[=================================================/ ] 27900/33120 84%\r[==============\0===================================/ ] 28000/33120 84%\r[==================================================/ ] 28200/33120 85%\r[==================================================/ ] 28300/33120 85%\r[==================================================/ ] 28400/33120 85%\r[==================================================/ ] 28500/33120 86%\r[==================================================/ ] 28600/33120 86%\r[===================================================/ ] 28700/33120 86%\r[===================================================/ ] 28800
/33120 86%\r[===================================================/ ] 29000/33120 87%\r[====================================================/ ] 29400/33120 88%\r[====================================================/ ] 29600/33120 89%\r[====================================================/ ] 29700/33120 89%\r[=====================================================/ ] 29800/33120 89%\r[=====================================================/ ] 29900/33120 90%\r[=====================================================/ ] 30300/33120 91%\r[======================================================/ ] 30400/33120 91%\r[======================================================/ ] 30500/33120 92%\r[======================================================/ ] 30700/33120 92%\r[======================================================/ ] 30800/33120 92%\r[=======================================================/ ] 30900/33120 93%\r[========================
===============================/ ] 31000/33120 93%\r[=======================================================- ] 31200/33120 94%\r[=======================================================- ] 31300/33120 94%\r[=======================================================- ] 31400/33120 94%\r[========================================================\ ] 31800/33120 96%\r[========================================================\ ] \031900/33120 96%\r[=========================================================\ ] 32000/33120 96%\r[=========================================================\ ] 32100/33120 96%\r[=========================================================\ ] 32200/33120 97%\r[=========================================================\ ] 32300/33120 97%\r[=========================================================\ ] 32400/33120 97%\r[=========================================================\ ] 32500/33120 98%\r[==========================================================\
] 32600/33120 98%\r[==========================================================\ ] 32700/33120 98%\r[==========================================================\ ] 32800/33120 99%\r[==========================================================\ ] 32900/33120 99%\r[==========================================================\ ] 33000/33120 99%\r[==========================================================\ ] 33100/33120 99%\r[===========================================================\] 33120/33120 100%
Exportable Squashfs 4.0 filesystem, gzip compressed, data block size 131072
compressed data, compressed metadata, compressed fragments, no xattrs
duplicates are removed
Filesystem size 165919.96 Kbytes (162.03 Mbytes)
25.05% of uncompressed filesystem size (662229.74 Kbytes)
Inode table size 339836 bytes (331.87 Kbytes)
28.41% of uncompressed inode table size (1196315 bytes)
Directory table size 324475 bytes (316.87 Kbytes)
44.32% of uncompressed directory table size (732038 bytes)
Number of duplicate files found 4051
Number of inodes 35287
Number of files 29957
Number of fragments 1803
Number of symbolic links 2664
Number of device nodes 271
Number of fifo nodes 0
Number of socket nodes 0
Number of directories 2395
Number of ids (unique uids + gids) 12
Number of uids 4
root (0)
man (13)
nobody (65534)
ntp (123)
Number of gids 10
root (0)
disk (6)
kmem (9)
tty (5)
unknown (248)
wheel (10)
utmp (406)
unknown (249)
portage (250)
ntp (123)
--- Running action sequence: setup_overlay
--- Running action sequence: create_iso
17500+0 records in
17500+0 records out
17920000 bytes (18 MB) copied, 0.108712 s, 165 MB/s
mkfs.fat 3.0.22 (2013-07-19)
>> Populating EFI image...
'/home/catalyst/builds/default/livecd-stage2-ia64-20140429//boot/System.map-gentoo' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140429//gentoo.efimg.mountPoint/System.map-gentoo'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140429//boot/efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140429//gentoo.efimg.mountPoint/efi'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140429//boot/efi/boot' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140429//gentoo.efimg.mountPoint/efi/boot'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140429//boot/efi/boot/gentoo.igz' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140429//gentoo.efimg.mountPoint/efi/boot/gentoo.igz'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140429//boot/efi/boot/bootia64.efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140429//gentoo.efimg.mountPoint/efi/boot/bootia64.efi'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140429//boot/efi/boot/elilo.msg' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140429//gentoo.efimg.mountPoint/efi/boot/elilo.msg'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140429//boot/efi/boot/gentoo' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140429//gentoo.efimg.mountPoint/efi/boot/gentoo'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140429//boot/efi/boot/elilo.conf' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140429//gentoo.efimg.mountPoint/efi/boot/elilo.conf'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140429//boot/elilo.conf' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140429//gentoo.efimg.mountPoint/elilo.conf'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140429//boot/elilo.efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140429//gentoo.efimg.mountPoint/elilo.efi'
>> Removing /boot...
>> Running mkisofs to create iso image....
>> mkisofs -R -l -b gentoo.efimg -c boot.cat -no-emul-boot -J -V "Gentoo Linux IA64 20140429" -o /var/tmp/catalyst/builds/default/install-ia64-minimal-20140429.iso /home/catalyst/builds/default/livecd-stage2-ia64-20140429/
mkisofs: No such file or directory. Unable to open disc image file '/var/tmp/catalyst/builds/default/install-ia64-minimal-20140429.iso'.
Cannot make ISO image
!!! catalyst: ISO creation script failed.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1303, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1376, in create_iso
env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/livecd-stage2-ia64-20140429/.catalyst_lock'
Full build log at /tmp/catalyst-auto.5242/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2014-04-22 12:59 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2014-04-22 12:59 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
livecd: removing /usr/lib*/perl5/site_perl
livecd: removing /usr/lib*/gcc-lib/*/*/libgcj*
livecd: removing /usr/sbin/archive-conf
livecd: removing /usr/sbin/dispatch-conf
livecd: removing /usr/sbin/emaint
livecd: removing /usr/sbin/emerge-webrsync
livecd: removing /usr/sbin/env-update
livecd: removing /usr/sbin/fb*
livecd: removing /usr/sbin/fixpackages
livecd: removing /usr/sbin/quickpkg
livecd: removing /usr/sbin/regenworld
livecd: removing /usr/share/consolefonts/1*
livecd: removing /usr/share/consolefonts/7*
livecd: removing /usr/share/consolefonts/8*
livecd: removing /usr/share/consolefonts/9*
livecd: removing /usr/share/consolefonts/A*
livecd: removing /usr/share/consolefonts/C*
livecd: removing /usr/share/consolefonts/E*
livecd: removing /usr/share/consolefonts/G*
livecd: removing /usr/share/consolefonts/L*
livecd: removing /usr/share/consolefonts/M*
livecd: removing /usr/share/consolefonts/R*
livecd: removing /usr/share/consolefonts/a*
livecd: removing /usr/share/consolefonts/c*
livecd: removing /usr/share/consolefonts/dr*
livecd: removing /usr/share/consolefonts/g*
livecd: removing /usr/share/consolefonts/i*
livecd: removing /usr/share/consolefonts/k*
livecd: removing /usr/share/consolefonts/l*
livecd: removing /usr/share/consolefonts/r*
livecd: removing /usr/share/consolefonts/s*
livecd: removing /usr/share/consolefonts/t*
livecd: removing /usr/share/consolefonts/v*
livecd: removing /usr/share/misc/*.old
--- Running action sequence: empty
Emptying directory /etc/cron.daily
/etc/cron.hourly not a directory or does not exist, skipping 'empty' operation.
/etc/cron.monthly not a directory or does not exist, skipping 'empty' operation.
/etc/cron.weekly not a directory or does not exist, skipping 'empty' operation.
Emptying directory /etc/logrotate.d
/etc/modules.autoload.d not a directory or does not exist, skipping 'empty' operation.
/etc/runlevels/single not a directory or does not exist, skipping 'empty' operation.
Emptying directory /etc/skel
/lib/dev-state not a directory or does not exist, skipping 'empty' operation.
/lib/udev-state not a directory or does not exist, skipping 'empty' operation.
/lib64/dev-state not a directory or does not exist, skipping 'empty' operation.
/lib64/udev-state not a directory or does not exist, skipping 'empty' operation.
/root/.ccache not a directory or does not exist, skipping 'empty' operation.
Emptying directory /tmp
/usr/diet/include not a directory or does not exist, skipping 'empty' operation.
/usr/diet/man not a directory or does not exist, skipping 'empty' operation.
/usr/i386-gentoo-linux-uclibc not a directory or does not exist, skipping 'empty' operation.
/usr/i386-pc-linux-gnu not a directory or does not exist, skipping 'empty' operation.
/usr/i386-pc-linux-uclibc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/config not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/doc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/etc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/awk not a directory or does not exist, skipping 'empty' operation.
/usr/lib/ccache not a directory or does not exist, skipping 'empty' operation.
/usr/lib/gcc-config not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/lib/gconv
Emptying directory /usr/lib/nfs
/usr/lib/perl5/site_perl not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/lib/portage
/usr/lib/python2.2 not a directory or does not exist, skipping 'empty' operation.
/usr/lib/python2.3 not a directory or does not exist, skipping 'empty' operation.
/usr/lib/python2.4/test not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/config not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/doc not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/etc not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/awk not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/ccache not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/gcc-config not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/gconv not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/nfs not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/perl5/site_perl not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/portage not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.2 not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.3 not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.4/test not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/local
Emptying directory /usr/portage
/usr/powerpc-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
/usr/powerpc64-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/aclocal
Emptying directory /usr/share/baselayout
/usr/share/binutils-data not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/consolefonts/partialfonts
Emptying directory /usr/share/consoletrans
Emptying directory /usr/share/dict
Emptying directory /usr/share/doc
/usr/share/emacs not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/et
Emptying directory /usr/share/gcc-data
/usr/share/genkernel not a directory or does not exist, skipping 'empty' operation.
/usr/share/gettext not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/glib-2.0
/usr/share/gnuconfig not a directory or does not exist, skipping 'empty' operation.
/usr/share/gtk-doc not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/i18n
Emptying directory /usr/share/info
/usr/share/lcms not a directory or does not exist, skipping 'empty' operation.
/usr/share/libtool not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/locale
Emptying directory /usr/share/man
/usr/share/rfc not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/ss
/usr/share/state not a directory or does not exist, skipping 'empty' operation.
/usr/share/texinfo not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/unimaps
Emptying directory /usr/share/zoneinfo
/usr/sparc-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/src
/usr/x86_64-pc-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /var/cache
Emptying directory /var/empty
Emptying directory /var/lib/portage
Emptying directory /var/log
Emptying directory /var/spool
/var/state not a directory or does not exist, skipping 'empty' operation.
Emptying directory /var/tmp
--- Running action sequence: target_setup
Setting up filesystems per filesystem type
Creating squashfs...
Parallel mksquashfs: Using 4 processors
Creating 4.0 filesystem on /home/catalyst/builds/default/livecd-stage2-ia64-20140422//image.squashfs, block size 131072.
\r[/ ] 200/33120 0%\r[/ ] 300/33120 0%\r[/ ] 400/33120 1%\r[/ ] 500/33120 1%\r[=/ ] 600/33120 1%\r[=/ ] 700/33120 2%\r[=- ] 800/33120 2%\r[=/ ] 1100/33120 3%\r[==\ ] 1500/33120 4%\r[===/ ] 1900/33120 5%\r[===| ] 2100/33120 6%\r[===\ ] 2200/33120 6%\r[====|
] 2700/33120 8%\r[======\ ] 3700/33120 11%\r[======| ] 3800/33120 11%\r[======| ] 3900/33120 11%\r[=======| ] 4000/33120 12%\r[=======| ] 4100/33120 12%\r[=======| ] 4200/33120 12%\r[=======| ] 4300/33120 12%\r[=======| ] 4400/33120 13%\r[========| ] 4500/33120 13%\r[========| ] 4600/33120 13%\r[========| ] 4700/33120 14%\r[========| ] 4800/33120
14%\r[========| \0 ] 4900/33120 14%\r[========| ] 5000/33120 15%\r[=========| ] 5200/33120 15%\r[=========| ] 5300/33120 16%\r[=========/ ] 5500/33120 16%\r[==========/ ] 5800/33120 17%\r[==========/ ] 5900/33120 17%\r[==========/ ] 6000/33120 18%\r[==========/ ] 6100/33120 18%\r[===========/ ] 6200/33120 18%\r[===========/ ] 6300/33120 19%\r[===========/ ] 6400/33120 19%\r[===========/
] 6500/33120 19%\r[===========/ ] 6600/33120 19%\r[===========/ ] 6700/33120 20%\r[============/ ] 6800/33120 20%\r[============/ ] 6900/33120 20%\r[============- ] 7000/33120 21%\r[============- ] 7100/33120 21%\r[============- ] 7200/33120 21%\r[=============- ] 7300/33120 22%\r[=============- ] 7400/33120 22%\r[=============- ] 7500/33120 22%\r[=============- ] 7600/33120 22%\r[=============- ] 770
0/33120 23%\r[=============- ] 7800/33120 23%\r[==============\0- ] 7900/33120 23%\r[==============- ] 8000/33120 24%\r[==============- ] 8100/33120 24%\r[==============- ] 8200/33120 24%\r[==============- ] 8300/33120 25%\r[==============- ] 8400/33120 25%\r[===============- ] 8500/33120 25%\r[===============- ] 8600/33120 25%\r[===============- ] 8700/33120 26%\r[===============- ] 8800/33120 26%\r[===============- ] 8900/33120 26%\r[================\
] 9200/33120 27%\r[================\ ] 9300/33120 28%\r[================| ] 9400/33120 28%\r[================| ] 9500/33120 28%\r[=================| ] 9600/33120 28%\r[=================| ] 9700/33120 29%\r[=================| ] 9800/33120 29%\r[=================| ] 9900/33120 29%\r[=================| ] 10000/33120 30%\r[=================| ] 10100/33120 30%\r[==================| ] 10200/33120 30%\r[==================/ ] 10300/33120 31%\r[==================/
] 10400/33120 31%\r[==================/ ] 10500/33120 31%\r[==================/ ] \010600/33120 32%\r[===================/ ] 10700/33120 32%\r[===================/ ] 10800/33120 32%\r[===================/ ] 10900/33120 32%\r[===================/ ] 11000/33120 33%\r[===================/ ] 11100/33120 33%\r[===================/ ] 11200/33120 33%\r[====================/ ] 11300/33120 34%\r[====================/ ] 11400/33120 34%\r[====================/ ] 11500/33120 34%\r[====================/ ] 11600/33120 35%\r[===============
=====/ ] 11700/33120 35%\r[=====================/ ] 11800/33120 35%\r[=====================- ] 12200/33120 36%\r[=====================- ] 12300/33120 37%\r[======================- ] 12500/33120 37%\r[======================- ] 12600/33120 38%\r[======================- ] 12700/33120 38%\r[======================- ] 12900/33120 38%\r[=======================- ] 13000/33120 39%\r[=======================- ] 13100/33120 39%\r[=======================- ] 13200/33120 39%\r[=======================- ] 13300/33120 40%\r[=======================-
] 13400/33120 40%\r[========================- ] 13500/33120 40%\r[========================- ] 13600/33120 41%\r[========================\ \0 ] 13700/33120 41%\r[========================\ ] 13800/33120 41%\r[========================\ ] 13900/33120 41%\r[========================\ ] 14000/33120 42%\r[=========================\ ] 14100/33120 42%\r[=========================| ] 14200/33120 42%\r[=========================/ ] 14300/33120 43%\r[==========================| ] 14700/33120 44%\r[==========================| ] 15100/33120 45%\r[===========================| ] 15200/33120 45%\r[========
===================/ ] 15500/33120 46%\r[=============================- ] 16500/33120 49%\r[=============================- ] 16600/33120 50%\r[=============================- ] 16700/33120 50%\r[=============================- ] 16800/33120 50%\r[==============================\ ] 16900/33120 51%\r[==============================\ ] 17000/33120 51%\r[==============================\ ] 17100/33120 51%\r[==============================\ ] 17200/33120 51%\r[==============================\ ] 17300/33120 52%\r[===============================\ ] 17600/33120 53%\r[===============================\ ] 17700/33120 53%\r[===============================|
] 17800/33120 53%\r[===============================| ] 17900/33120 54%\r[================================| ] 18000/33120 54%\r[================================- ] 18100/33120 54%\0\r[================================| ] 18300/33120 55%\r[================================| ] 18400/33120 55%\r[================================| ] 18500/33120 55%\r[=================================| ] 18600/33120 56%\r[=================================| ] 18700/33120 56%\r[=================================| ] 18900/33120 57%\r[=================================| ] 19000/33120 57%\r[==================================/ ] 19100/33120 57%\r[==================================/ ] 19200/33120 57%\r[=
=================================/ ] 19300/33120 58%\r[==================================/ ] 19400/33120 58%\r[==================================/ ] 19500/33120 58%\r[===================================/ ] 19800/33120 59%\r[===================================/ ] 19900/33120 60%\r[===================================/ ] 20000/33120 60%\r[====================================- ] 20300/33120 61%\r[====================================- ] 20400/33120 61%\r[====================================- ] 20500/33120 61%\r[====================================- ] 20600/33120 62%\r[=====================================- ] 20800/33120 62%\r[======================================- ] 21500/33120 64%\r[======================================
- ] 21600/33120 65%\r[======================================\ ] 21700/33120 65%\r[=======================================\ ] 22000/33120 66%\r[=======================================\ ] 22100/33120 66%\r[=======================================\ \0 ] 22300/33120 67%\r[=======================================\ ] 22400/33120 67%\r[========================================\ ] 22700/33120 68%\r[========================================- ] 22900/33120 69%\r[========================================- ] 23000/33120 69%\r[=========================================- ] 23100/33120 69%\r[=========================================\ ] 23200/33120 70%\r[=========================================\ ] 23300/33120 70%\r[=========================================\ ] 23400/33120
70%\r[=========================================\ ] 23500/33120 70%\r[==========================================\ ] 23600/33120 71%\r[==========================================\ ] 23700/33120 71%\r[==========================================\ ] 23800/33120 71%\r[===========================================\ ] 24400/33120 73%\r[===========================================\ ] 24500/33120 73%\r[============================================| ] 24900/33120 75%\r[============================================| ] 25000/33120 75%\r[============================================| ] 25100/33120 75%\r[============================================| ] 25200/33120 76%\r[=============================================| ] 25300/33120 76%\r[=============================================| ] 25400/33120 76%\r[===============================
==============| ] 25500/33120 76%\r[=============================================| ] 25600/33120 77%\r[=============================================| ] 25700/33120 77%\r[=============================================| ] 25800/33120 77%\r[==============================================| ] 25900/33120 78%\r[==============\0================================| ] 26000/33120 78%\r[==============================================| ] 26100/33120 78%\r[==============================================| ] 26200/33120 79%\r[==============================================| ] 26300/33120 79%\r[===============================================| ] 26400/33120 79%\r[===============================================| ] 26500/33120 80%\r[===============================================| ] 26600/33120 80%\r[===============================================| ] 26700
/33120 80%\r[===============================================| ] 26800/33120 80%\r[================================================| ] 27300/33120 82%\r[================================================| ] 27400/33120 82%\r[================================================| ] 27500/33120 83%\r[=================================================| ] 27600/33120 83%\r[=================================================/ ] 27800/33120 83%\r[=================================================/ ] 28000/33120 84%\r[==================================================/ ] 28100/33120 84%\r[==================================================/ ] 28200/33120 85%\r[==================================================/ ] 28300/33120 85%\r[==================================================/ ] 28400/33120 85%\r[==================================================/ ] 28500/33120 86%\r[========================
==========================/ ] 28600/33120 86%\r[===================================================/ ] 28700/33120 86%\r[===================================================/ ] 28800/33120 86%\r[===================================================/ ] 28900/33120 87%\r[===================================================/ ] 29000/33120 87%\r[===================================================/ ] \029100/33120 87%\r[====================================================/ ] 29200/33120 88%\r[====================================================/ ] 29300/33120 88%\r[====================================================/ ] 29400/33120 88%\r[====================================================/ ] 29500/33120 89%\r[====================================================/ ] 29600/33120 89%\r[====================================================/ ] 29700/33120 89%\r[=====================================================/
] 29800/33120 89%\r[=====================================================/ ] 29900/33120 90%\r[=====================================================/ ] 30000/33120 90%\r[=====================================================/ ] 30100/33120 90%\r[=====================================================/ ] 30200/33120 91%\r[=====================================================/ ] 30300/33120 91%\r[======================================================/ ] 30500/33120 92%\r[======================================================/ ] 30600/33120 92%\r[======================================================/ ] 30700/33120 92%\r[======================================================/ ] 30800/33120 92%\r[=======================================================/ ] 30900/33120 93%\r[=======================================================/ ] 31000/33120 93%\r[=======================================================/ ] 31100/33120 93%\r[=================
======================================/ ] 31200/33120 94%\r[=======================================================- ] 31300/33120 94%\r[=======================================================- ] 31400/33120 94%\r[========================================================- ] 31500/33120 95%\r[========================================================\ ] 31900/33120 96%\r[=========================================================\ ] 32000/33120 96%\r[==============================\0===========================\ ] 32100/33120 96%\r[=========================================================\ ] 32200/33120 97%\r[=========================================================\ ] 32300/33120 97%\r[=========================================================\ ] 32400/33120 97%\r[=========================================================\ ] 32500/33120 98%\r[==========================================================\ ] 32600/33120 98%\r[=====================================================
=====\ ] 32700/33120 98%\r[==========================================================\ ] 32800/33120 99%\r[==========================================================\ ] 32900/33120 99%\r[===========================================================\] 33120/33120 100%
Exportable Squashfs 4.0 filesystem, gzip compressed, data block size 131072
compressed data, compressed metadata, compressed fragments, no xattrs
duplicates are removed
Filesystem size 165919.36 Kbytes (162.03 Mbytes)
25.05% of uncompressed filesystem size (662231.60 Kbytes)
Inode table size 339998 bytes (332.03 Kbytes)
28.42% of uncompressed inode table size (1196315 bytes)
Directory table size 324462 bytes (316.86 Kbytes)
44.32% of uncompressed directory table size (732038 bytes)
Number of duplicate files found 4051
Number of inodes 35287
Number of files 29957
Number of fragments 1803
Number of symbolic links 2664
Number of device nodes 271
Number of fifo nodes 0
Number of socket nodes 0
Number of directories 2395
Number of ids (unique uids + gids) 12
Number of uids 4
root (0)
man (13)
nobody (65534)
ntp (123)
Number of gids 10
root (0)
disk (6)
kmem (9)
tty (5)
unknown (248)
wheel (10)
utmp (406)
unknown (249)
portage (250)
ntp (123)
--- Running action sequence: setup_overlay
--- Running action sequence: create_iso
17500+0 records in
17500+0 records out
17920000 bytes (18 MB) copied, 0.114168 s, 157 MB/s
mkfs.fat 3.0.22 (2013-07-19)
>> Populating EFI image...
'/home/catalyst/builds/default/livecd-stage2-ia64-20140422//boot/System.map-gentoo' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140422//gentoo.efimg.mountPoint/System.map-gentoo'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140422//boot/efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140422//gentoo.efimg.mountPoint/efi'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140422//boot/efi/boot' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140422//gentoo.efimg.mountPoint/efi/boot'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140422//boot/efi/boot/gentoo.igz' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140422//gentoo.efimg.mountPoint/efi/boot/gentoo.igz'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140422//boot/efi/boot/bootia64.efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140422//gentoo.efimg.mountPoint/efi/boot/bootia64.efi'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140422//boot/efi/boot/elilo.msg' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140422//gentoo.efimg.mountPoint/efi/boot/elilo.msg'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140422//boot/efi/boot/gentoo' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140422//gentoo.efimg.mountPoint/efi/boot/gentoo'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140422//boot/efi/boot/elilo.conf' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140422//gentoo.efimg.mountPoint/efi/boot/elilo.conf'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140422//boot/elilo.conf' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140422//gentoo.efimg.mountPoint/elilo.conf'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140422//boot/elilo.efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140422//gentoo.efimg.mountPoint/elilo.efi'
>> Removing /boot...
>> Running mkisofs to create iso image....
>> mkisofs -R -l -b gentoo.efimg -c boot.cat -no-emul-boot -J -V "Gentoo Linux IA64 20140422" -o /var/tmp/catalyst/builds/default/install-ia64-minimal-20140422.iso /home/catalyst/builds/default/livecd-stage2-ia64-20140422/
mkisofs: No such file or directory. Unable to open disc image file '/var/tmp/catalyst/builds/default/install-ia64-minimal-20140422.iso'.
Cannot make ISO image
!!! catalyst: ISO creation script failed.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1303, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1376, in create_iso
env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/livecd-stage2-ia64-20140422/.catalyst_lock'
Full build log at /tmp/catalyst-auto.19904/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2014-04-15 12:29 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2014-04-15 12:29 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
livecd: removing /usr/lib*/perl5/site_perl
livecd: removing /usr/lib*/gcc-lib/*/*/libgcj*
livecd: removing /usr/sbin/archive-conf
livecd: removing /usr/sbin/dispatch-conf
livecd: removing /usr/sbin/emaint
livecd: removing /usr/sbin/emerge-webrsync
livecd: removing /usr/sbin/env-update
livecd: removing /usr/sbin/fb*
livecd: removing /usr/sbin/fixpackages
livecd: removing /usr/sbin/quickpkg
livecd: removing /usr/sbin/regenworld
livecd: removing /usr/share/consolefonts/1*
livecd: removing /usr/share/consolefonts/7*
livecd: removing /usr/share/consolefonts/8*
livecd: removing /usr/share/consolefonts/9*
livecd: removing /usr/share/consolefonts/A*
livecd: removing /usr/share/consolefonts/C*
livecd: removing /usr/share/consolefonts/E*
livecd: removing /usr/share/consolefonts/G*
livecd: removing /usr/share/consolefonts/L*
livecd: removing /usr/share/consolefonts/M*
livecd: removing /usr/share/consolefonts/R*
livecd: removing /usr/share/consolefonts/a*
livecd: removing /usr/share/consolefonts/c*
livecd: removing /usr/share/consolefonts/dr*
livecd: removing /usr/share/consolefonts/g*
livecd: removing /usr/share/consolefonts/i*
livecd: removing /usr/share/consolefonts/k*
livecd: removing /usr/share/consolefonts/l*
livecd: removing /usr/share/consolefonts/r*
livecd: removing /usr/share/consolefonts/s*
livecd: removing /usr/share/consolefonts/t*
livecd: removing /usr/share/consolefonts/v*
livecd: removing /usr/share/misc/*.old
--- Running action sequence: empty
Emptying directory /etc/cron.daily
/etc/cron.hourly not a directory or does not exist, skipping 'empty' operation.
/etc/cron.monthly not a directory or does not exist, skipping 'empty' operation.
/etc/cron.weekly not a directory or does not exist, skipping 'empty' operation.
Emptying directory /etc/logrotate.d
/etc/modules.autoload.d not a directory or does not exist, skipping 'empty' operation.
/etc/runlevels/single not a directory or does not exist, skipping 'empty' operation.
Emptying directory /etc/skel
/lib/dev-state not a directory or does not exist, skipping 'empty' operation.
/lib/udev-state not a directory or does not exist, skipping 'empty' operation.
/lib64/dev-state not a directory or does not exist, skipping 'empty' operation.
/lib64/udev-state not a directory or does not exist, skipping 'empty' operation.
/root/.ccache not a directory or does not exist, skipping 'empty' operation.
Emptying directory /tmp
/usr/diet/include not a directory or does not exist, skipping 'empty' operation.
/usr/diet/man not a directory or does not exist, skipping 'empty' operation.
/usr/i386-gentoo-linux-uclibc not a directory or does not exist, skipping 'empty' operation.
/usr/i386-pc-linux-gnu not a directory or does not exist, skipping 'empty' operation.
/usr/i386-pc-linux-uclibc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/config not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/doc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/etc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/awk not a directory or does not exist, skipping 'empty' operation.
/usr/lib/ccache not a directory or does not exist, skipping 'empty' operation.
/usr/lib/gcc-config not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/lib/gconv
Emptying directory /usr/lib/nfs
/usr/lib/perl5/site_perl not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/lib/portage
/usr/lib/python2.2 not a directory or does not exist, skipping 'empty' operation.
/usr/lib/python2.3 not a directory or does not exist, skipping 'empty' operation.
/usr/lib/python2.4/test not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/config not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/doc not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/etc not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/awk not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/ccache not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/gcc-config not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/gconv not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/nfs not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/perl5/site_perl not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/portage not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.2 not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.3 not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.4/test not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/local
Emptying directory /usr/portage
/usr/powerpc-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
/usr/powerpc64-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/aclocal
Emptying directory /usr/share/baselayout
/usr/share/binutils-data not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/consolefonts/partialfonts
Emptying directory /usr/share/consoletrans
Emptying directory /usr/share/dict
Emptying directory /usr/share/doc
/usr/share/emacs not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/et
Emptying directory /usr/share/gcc-data
/usr/share/genkernel not a directory or does not exist, skipping 'empty' operation.
/usr/share/gettext not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/glib-2.0
/usr/share/gnuconfig not a directory or does not exist, skipping 'empty' operation.
/usr/share/gtk-doc not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/i18n
Emptying directory /usr/share/info
/usr/share/lcms not a directory or does not exist, skipping 'empty' operation.
/usr/share/libtool not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/locale
Emptying directory /usr/share/man
/usr/share/rfc not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/ss
/usr/share/state not a directory or does not exist, skipping 'empty' operation.
/usr/share/texinfo not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/unimaps
Emptying directory /usr/share/zoneinfo
/usr/sparc-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/src
/usr/x86_64-pc-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /var/cache
Emptying directory /var/empty
Emptying directory /var/lib/portage
Emptying directory /var/log
Emptying directory /var/spool
/var/state not a directory or does not exist, skipping 'empty' operation.
Emptying directory /var/tmp
--- Running action sequence: target_setup
Setting up filesystems per filesystem type
Creating squashfs...
Parallel mksquashfs: Using 4 processors
Creating 4.0 filesystem on /home/catalyst/builds/default/livecd-stage2-ia64-20140415//image.squashfs, block size 131072.
\r[/ ] 100/33117 0%\r[- ] 300/33117 0%\r[- ] 400/33117 1%\r[| ] 500/33117 1%\r[=| ] 600/33117 1%\r[=| ] 700/33117 2%\r[=| ] 800/33117 2%\r[==- ] 1400/33117 4%\r[==\ ] 1500/33117 4%\r[===/ ] 1900/33117 5%\r[===/ ] 2000/33117 6%\r[===| ] 2100/33117 6%\r[====|
] 2700/33117 8%\r[======| ] 3600/33117 10%\r[======| ] 3700/33117 11%\r[======| ] 3800/33117 11%\r[======| ] 3900/33117 11%\r[=======| ] 4000/33117 12%\r[=======| ] 4100/33117 12%\r[=======| ] 4200/33117 12%\r[=======| ] 4300/33117 12%\r[=======| ] 4400/33117 13%\r[========| ] 4500/33117 13%\r[========| ] 4600/33117 13%\r[========| ] 4700/33117
14%\r[========| \0 ] 4800/33117 14%\r[========| ] 4900/33117 14%\r[=========| ] 5100/33117 15%\r[=========| ] 5200/33117 15%\r[=========/ ] 5300/33117 16%\r[=========/ ] 5500/33117 16%\r[=========/ ] 5600/33117 16%\r[==========/ ] 5700/33117 17%\r[==========/ ] 5800/33117 17%\r[==========/ ] 6000/33117 18%\r[==========/ ] 6100/33117 18%\r[===========/ ] 6200/33117 18%\r[===========-
] 6300/33117 19%\r[===========- ] 6400/33117 19%\r[===========- ] 6500/33117 19%\r[===========- ] 6700/33117 20%\r[============- ] 6800/33117 20%\r[============- ] 6900/33117 20%\r[============- ] 7000/33117 21%\r[============- ] 7100/33117 21%\r[============- ] 7200/33117 21%\r[=============- ] 7300/33117 22%\r[=============- ] 7600/33117 22%\r[=============- ] 7700/33117 23%\r[=============- ] 780
0/33117 23%\r[==============- ] 7900/33117 23%\r[==============\0- ] 8000/33117 24%\r[==============\ ] 8100/33117 24%\r[==============\ ] 8200/33117 24%\r[==============\ ] 8400/33117 25%\r[===============\ ] 8500/33117 25%\r[===============\ ] 8600/33117 25%\r[===============\ ] 8700/33117 26%\r[===============\ ] 8800/33117 26%\r[===============\ ] 8900/33117 26%\r[================| ] 9400/33117 28%\r[================| ] 9500/33117 28%\r[=================/
] 9600/33117 28%\r[=================/ ] 9700/33117 29%\r[=================/ ] 9800/33117 29%\r[=================/ ] 9900/33117 29%\r[=================/ ] 10000/33117 30%\r[=================/ ] 10100/33117 30%\r[==================/ ] 10200/33117 30%\r[==================/ ] 10300/33117 31%\r[==================/ ] 10400/33117 31%\r[==================/ ] 10500/33117 31%\r[==================/ ] 10600/33117 32%\r[===================/ ] 10700/33117 32%\r[===================/
] 10800/33117 32%\r[===================/ ] 10900/33117 32%\r[===================/ ] \011000/33117 33%\r[===================/ ] 11100/33117 33%\r[====================/ ] 11700/33117 35%\r[=====================- ] 11800/33117 35%\r[=====================- ] 11900/33117 35%\r[=====================- ] 12000/33117 36%\r[=====================- ] 12100/33117 36%\r[=====================- ] 12200/33117 36%\r[======================- ] 12400/33117 37%\r[======================- ] 12500/33117 37%\r[======================- ] 12700/33117 38%\r[===============
=======- ] 12900/33117 38%\r[=======================- ] 13000/33117 39%\r[=======================- ] 13100/33117 39%\r[=======================- ] 13200/33117 39%\r[=======================\ ] 13300/33117 40%\r[=======================\ ] 13400/33117 40%\r[========================\ ] 13500/33117 40%\r[========================\ ] 13600/33117 41%\r[========================\ ] 13700/33117 41%\r[========================\ ] 13800/33117 41%\r[========================\ ] 14000/33117 42%\r[==========================| ] 15100/33117 45%\r[===========================|
] 15200/33117 45%\r[===========================- ] 15400/33117 46%\r[===========================- ] 15500/33117 46%\r[===========================- \0 ] 15600/33117 47%\r[===========================- ] 15700/33117 47%\r[============================- ] 15800/33117 47%\r[============================- ] 15900/33117 48%\r[============================| ] 16000/33117 48%\r[============================/ ] 16200/33117 48%\r[=============================- ] 16400/33117 49%\r[=============================- ] 16500/33117 49%\r[=============================- ] 16600/33117 50%\r[=============================- ] 16700/33117 50%\r[========
=====================- ] 16800/33117 50%\r[==============================\ ] 17000/33117 51%\r[==============================\ ] 17100/33117 51%\r[==============================\ ] 17200/33117 51%\r[==============================\ ] 17300/33117 52%\r[===============================\ ] 17600/33117 53%\r[===============================| ] 17800/33117 53%\r[===============================| ] 17900/33117 54%\r[================================| ] 18000/33117 54%\r[================================| ] 18400/33117 55%\r[================================| ] 18500/33117 55%\r[=================================| ] 18700/33117 56%\r[=================================|
] 18800/33117 56%\r[=================================| ] 18900/33117 57%\r[=================================| ] 19000/33117 57%\r[==================================| ] 19100/33117 57%\0\r[==================================/ ] 19200/33117 57%\r[==================================/ ] 19300/33117 58%\r[==================================/ ] 19400/33117 58%\r[==================================/ ] 19500/33117 58%\r[==================================| ] 19600/33117 59%\r[===================================| ] 19700/33117 59%\r[===================================/ ] 19800/33117 59%\r[===================================/ ] 19900/33117 60%\r[===================================/ ] 20000/33117 60%\r[=
==================================/ ] 20100/33117 60%\r[===================================/ ] 20200/33117 60%\r[====================================- ] 20300/33117 61%\r[====================================- ] 20400/33117 61%\r[====================================- ] 20500/33117 61%\r[====================================- ] 20600/33117 62%\r[====================================- ] 20700/33117 62%\r[=====================================- ] 20800/33117 62%\r[=====================================| ] 20900/33117 63%\r[======================================- ] 21500/33117 64%\r[======================================- ] 21600/33117 65%\r[=======================================- ] 22000/33117 66%\r[======================================
=- ] 22100/33117 66%\r[=======================================\ ] 22200/33117 67%\r[=======================================\ ] 22300/33117 67%\r[=======================================\ ] 22400/33117 67%\r[========================================\ \0 ] 22500/33117 67%\r[========================================\ ] 22600/33117 68%\r[========================================- ] 22900/33117 69%\r[========================================- ] 23000/33117 69%\r[=========================================- ] 23100/33117 69%\r[=========================================\ ] 23400/33117 70%\r[==========================================\ ] 23700/33117 71%\r[==========================================\ ] 23800/33117 71%\r[==========================================\ ] 23900/33117
72%\r[==========================================\ ] 24000/33117 72%\r[==========================================\ ] 24100/33117 72%\r[===========================================\ ] 24200/33117 73%\r[===========================================\ ] 24300/33117 73%\r[===========================================\ ] 24400/33117 73%\r[===========================================\ ] 24500/33117 73%\r[===========================================\ ] 24600/33117 74%\r[============================================\ ] 24800/33117 74%\r[============================================\ ] 24900/33117 75%\r[============================================| ] 25000/33117 75%\r[============================================| ] 25200/33117 76%\r[=============================================| ] 25400/33117 76%\r[===============================
==============| ] 25500/33117 76%\r[=============================================| ] 25600/33117 77%\r[=============================================| ] 25700/33117 77%\r[=============================================| ] 25800/33117 77%\r[==============================================| ] 25900/33117 78%\r[==============\0================================| ] 26100/33117 78%\r[==============================================| ] 26200/33117 79%\r[==============================================| ] 26300/33117 79%\r[===============================================| ] 26400/33117 79%\r[===============================================| ] 26500/33117 80%\r[===============================================| ] 26600/33117 80%\r[===============================================| ] 26700/33117 80%\r[===============================================| ] 26800
/33117 80%\r[================================================| ] 27000/33117 81%\r[================================================| ] 27500/33117 83%\r[=================================================/ ] 27800/33117 83%\r[=================================================/ ] 27900/33117 84%\r[=================================================/ ] 28000/33117 84%\r[==================================================/ ] 28100/33117 84%\r[==================================================/ ] 28200/33117 85%\r[==================================================/ ] 28300/33117 85%\r[==================================================/ ] 28600/33117 86%\r[===================================================/ ] 28700/33117 86%\r[===================================================/ ] 28900/33117 87%\r[===================================================/ ] 29000/33117 87%\r[========================
===========================/ ] 29100/33117 87%\r[====================================================/ ] 29200/33117 88%\r[====================================================/ ] 29300/33117 88%\r[====================================================/ ] 29400/33117 88%\r[====================================================/ ] 29500/33117 89%\r[=====================================================/ ] \029900/33117 90%\r[=====================================================/ ] 30000/33117 90%\r[=======================================================- ] 31300/33117 94%\r[========================================================- ] 31500/33117 95%\r[========================================================\ ] 31600/33117 95%\r[========================================================\ ] 31700/33117 95%\r[========================================================\ ] 31900/33117 96%\r[=========================================================\
] 32100/33117 96%\r[=========================================================\ ] 32200/33117 97%\r[=========================================================\ ] 32500/33117 98%\r[==========================================================\ ] 32900/33117 99%\r[==========================================================\ ] 33100/33117 99%\r[===========================================================\] 33117/33117 100%
Exportable Squashfs 4.0 filesystem, gzip compressed, data block size 131072
compressed data, compressed metadata, compressed fragments, no xattrs
duplicates are removed
Filesystem size 165873.72 Kbytes (161.99 Mbytes)
25.05% of uncompressed filesystem size (662040.22 Kbytes)
Inode table size 339700 bytes (331.74 Kbytes)
28.40% of uncompressed inode table size (1196247 bytes)
Directory table size 324303 bytes (316.70 Kbytes)
44.30% of uncompressed directory table size (732029 bytes)
Number of duplicate files found 4052
Number of inodes 35285
Number of files 29955
Number of fragments 1803
Number of symbolic links 2664
Number of device nodes 271
Number of fifo nodes 0
Number of socket nodes 0
Number of directories 2395
Number of ids (unique uids + gids) 12
Number of uids 4
root (0)
man (13)
nobody (65534)
ntp (123)
Number of gids 10
root (0)
disk (6)
kmem (9)
tty (5)
unknown (248)
wheel (10)
utmp (406)
unknown (249)
portage (250)
ntp (123)
--- Running action sequence: setup_overlay
--- Running action sequence: create_iso
17496+0 records in
17496+0 records out
17915904 bytes (18 MB) copied, 0.130187 s, 138 MB/s
mkfs.fat 3.0.22 (2013-07-19)
>> Populating EFI image...
'/home/catalyst/builds/default/livecd-stage2-ia64-20140415//boot/System.map-gentoo' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140415//gentoo.efimg.mountPoint/System.map-gentoo'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140415//boot/efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140415//gentoo.efimg.mountPoint/efi'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140415//boot/efi/boot' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140415//gentoo.efimg.mountPoint/efi/boot'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140415//boot/efi/boot/gentoo.igz' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140415//gentoo.efimg.mountPoint/efi/boot/gentoo.igz'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140415//boot/efi/boot/bootia64.efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140415//gentoo.efimg.mountPoint/efi/boot/bootia64.efi'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140415//boot/efi/boot/elilo.msg' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140415//gentoo.efimg.mountPoint/efi/boot/elilo.msg'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140415//boot/efi/boot/gentoo' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140415//gentoo.efimg.mountPoint/efi/boot/gentoo'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140415//boot/efi/boot/elilo.conf' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140415//gentoo.efimg.mountPoint/efi/boot/elilo.conf'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140415//boot/elilo.conf' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140415//gentoo.efimg.mountPoint/elilo.conf'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140415//boot/elilo.efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140415//gentoo.efimg.mountPoint/elilo.efi'
>> Removing /boot...
>> Running mkisofs to create iso image....
>> mkisofs -R -l -b gentoo.efimg -c boot.cat -no-emul-boot -J -V "Gentoo Linux IA64 20140415" -o /var/tmp/catalyst/builds/default/install-ia64-minimal-20140415.iso /home/catalyst/builds/default/livecd-stage2-ia64-20140415/
mkisofs: No such file or directory. Unable to open disc image file '/var/tmp/catalyst/builds/default/install-ia64-minimal-20140415.iso'.
Cannot make ISO image
!!! catalyst: ISO creation script failed.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1303, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1376, in create_iso
env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/livecd-stage2-ia64-20140415/.catalyst_lock'
Full build log at /tmp/catalyst-auto.18564/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2014-04-08 23:36 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2014-04-08 23:36 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
livecd: removing /usr/lib*/perl5/site_perl
livecd: removing /usr/lib*/gcc-lib/*/*/libgcj*
livecd: removing /usr/sbin/archive-conf
livecd: removing /usr/sbin/dispatch-conf
livecd: removing /usr/sbin/emaint
livecd: removing /usr/sbin/emerge-webrsync
livecd: removing /usr/sbin/env-update
livecd: removing /usr/sbin/fb*
livecd: removing /usr/sbin/fixpackages
livecd: removing /usr/sbin/quickpkg
livecd: removing /usr/sbin/regenworld
livecd: removing /usr/share/consolefonts/1*
livecd: removing /usr/share/consolefonts/7*
livecd: removing /usr/share/consolefonts/8*
livecd: removing /usr/share/consolefonts/9*
livecd: removing /usr/share/consolefonts/A*
livecd: removing /usr/share/consolefonts/C*
livecd: removing /usr/share/consolefonts/E*
livecd: removing /usr/share/consolefonts/G*
livecd: removing /usr/share/consolefonts/L*
livecd: removing /usr/share/consolefonts/M*
livecd: removing /usr/share/consolefonts/R*
livecd: removing /usr/share/consolefonts/a*
livecd: removing /usr/share/consolefonts/c*
livecd: removing /usr/share/consolefonts/dr*
livecd: removing /usr/share/consolefonts/g*
livecd: removing /usr/share/consolefonts/i*
livecd: removing /usr/share/consolefonts/k*
livecd: removing /usr/share/consolefonts/l*
livecd: removing /usr/share/consolefonts/r*
livecd: removing /usr/share/consolefonts/s*
livecd: removing /usr/share/consolefonts/t*
livecd: removing /usr/share/consolefonts/v*
livecd: removing /usr/share/misc/*.old
--- Running action sequence: empty
Emptying directory /etc/cron.daily
/etc/cron.hourly not a directory or does not exist, skipping 'empty' operation.
/etc/cron.monthly not a directory or does not exist, skipping 'empty' operation.
/etc/cron.weekly not a directory or does not exist, skipping 'empty' operation.
Emptying directory /etc/logrotate.d
/etc/modules.autoload.d not a directory or does not exist, skipping 'empty' operation.
/etc/runlevels/single not a directory or does not exist, skipping 'empty' operation.
Emptying directory /etc/skel
/lib/dev-state not a directory or does not exist, skipping 'empty' operation.
/lib/udev-state not a directory or does not exist, skipping 'empty' operation.
/lib64/dev-state not a directory or does not exist, skipping 'empty' operation.
/lib64/udev-state not a directory or does not exist, skipping 'empty' operation.
/root/.ccache not a directory or does not exist, skipping 'empty' operation.
Emptying directory /tmp
/usr/diet/include not a directory or does not exist, skipping 'empty' operation.
/usr/diet/man not a directory or does not exist, skipping 'empty' operation.
/usr/i386-gentoo-linux-uclibc not a directory or does not exist, skipping 'empty' operation.
/usr/i386-pc-linux-gnu not a directory or does not exist, skipping 'empty' operation.
/usr/i386-pc-linux-uclibc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/config not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/doc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/X11/etc not a directory or does not exist, skipping 'empty' operation.
/usr/lib/awk not a directory or does not exist, skipping 'empty' operation.
/usr/lib/ccache not a directory or does not exist, skipping 'empty' operation.
/usr/lib/gcc-config not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/lib/gconv
Emptying directory /usr/lib/nfs
/usr/lib/perl5/site_perl not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/lib/portage
/usr/lib/python2.2 not a directory or does not exist, skipping 'empty' operation.
/usr/lib/python2.3 not a directory or does not exist, skipping 'empty' operation.
/usr/lib/python2.4/test not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/config not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/doc not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/X11/etc not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/awk not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/ccache not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/gcc-config not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/gconv not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/nfs not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/perl5/site_perl not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/portage not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.2 not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.3 not a directory or does not exist, skipping 'empty' operation.
/usr/lib64/python2.4/test not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/local
Emptying directory /usr/portage
/usr/powerpc-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
/usr/powerpc64-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/aclocal
Emptying directory /usr/share/baselayout
/usr/share/binutils-data not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/consolefonts/partialfonts
Emptying directory /usr/share/consoletrans
Emptying directory /usr/share/dict
Emptying directory /usr/share/doc
/usr/share/emacs not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/et
Emptying directory /usr/share/gcc-data
/usr/share/genkernel not a directory or does not exist, skipping 'empty' operation.
/usr/share/gettext not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/glib-2.0
/usr/share/gnuconfig not a directory or does not exist, skipping 'empty' operation.
/usr/share/gtk-doc not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/i18n
Emptying directory /usr/share/info
/usr/share/lcms not a directory or does not exist, skipping 'empty' operation.
/usr/share/libtool not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/locale
Emptying directory /usr/share/man
/usr/share/rfc not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/ss
/usr/share/state not a directory or does not exist, skipping 'empty' operation.
/usr/share/texinfo not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/share/unimaps
Emptying directory /usr/share/zoneinfo
/usr/sparc-unknown-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /usr/src
/usr/x86_64-pc-linux-gnu not a directory or does not exist, skipping 'empty' operation.
Emptying directory /var/cache
Emptying directory /var/empty
Emptying directory /var/lib/portage
Emptying directory /var/log
Emptying directory /var/spool
/var/state not a directory or does not exist, skipping 'empty' operation.
Emptying directory /var/tmp
--- Running action sequence: target_setup
Setting up filesystems per filesystem type
Creating squashfs...
Parallel mksquashfs: Using 4 processors
Creating 4.0 filesystem on /home/catalyst/builds/default/livecd-stage2-ia64-20140408//image.squashfs, block size 131072.
\r[- ] 400/33117 1%\r[=| ] 700/33117 2%\r[=| ] 800/33117 2%\r[=| ] 900/33117 2%\r[==- ] 1200/33117 3%\r[==\ ] 1500/33117 4%\r[===/ ] 1900/33117 5%\r[===| ] 2000/33117 6%\r[===| ] 2100/33117 6%\r[===- ] 2200/33117 6%\r[====| ] 2700/33117 8%\r[======\ ] 3600/33117 10%\r[======\
] 3700/33117 11%\r[======\ ] 3800/33117 11%\r[======\ ] 3900/33117 11%\r[=======\ ] 4000/33117 12%\r[=======\ ] 4100/33117 12%\r[=======\ ] 4200/33117 12%\r[=======\ ] 4300/33117 12%\r[=======| ] 4400/33117 13%\r[========| ] 4500/33117 13%\r[========| ] 4600/33117 13%\r[========| ] 4700/33117 14%\r[========| ] 4900/33117 14%\r[========| ] 5000/33117
15%\r[=========| \0 ] 5100/33117 15%\r[=========| ] 5200/33117 15%\r[=========| ] 5300/33117 16%\r[=========| ] 5500/33117 16%\r[==========/ ] 5800/33117 17%\r[==========/ ] 5900/33117 17%\r[==========/ ] 6100/33117 18%\r[===========/ ] 6200/33117 18%\r[===========/ ] 6300/33117 19%\r[===========/ ] 6400/33117 19%\r[===========/ ] 6500/33117 19%\r[===========/ ] 6700/33117 20%\r[============/
] 6800/33117 20%\r[============/ ] 6900/33117 20%\r[============/ ] 7000/33117 21%\r[============/ ] 7100/33117 21%\r[============/ ] 7200/33117 21%\r[=============- ] 7400/33117 22%\r[=============- ] 7500/33117 22%\r[=============- ] 7600/33117 22%\r[=============- ] 7700/33117 23%\r[=============- ] 7800/33117 23%\r[==============- ] 7900/33117 23%\r[==============- ] 8000/33117 24%\r[==============- ] 810
0/33117 24%\r[==============- ] 8200/33117 24%\r[==============\0- ] 8300/33117 25%\r[==============- ] 8400/33117 25%\r[===============- ] 8500/33117 25%\r[===============- ] 8600/33117 25%\r[===============- ] 8700/33117 26%\r[===============- ] 8800/33117 26%\r[===============- ] 8900/33117 26%\r[=================| ] 9700/33117 29%\r[=================| ] 10000/33117 30%\r[==================| ] 10300/33117 31%\r[==================| ] 10600/33117 32%\r[===================|
] 10800/33117 32%\r[===================| ] 10900/33117 32%\r[===================| ] 11000/33117 33%\r[===================/ ] 11100/33117 33%\r[===================/ ] 11200/33117 33%\r[====================/ ] 11300/33117 34%\r[====================/ ] 11400/33117 34%\r[====================/ ] 11700/33117 35%\r[=====================/ ] 11800/33117 35%\r[=====================/ ] 12000/33117 36%\r[=====================/ ] 12100/33117 36%\r[=====================/ ] 12300/33117 37%\r[======================/
] 12400/33117 37%\r[======================/ ] 12500/33117 37%\r[======================/ ] \012600/33117 38%\r[======================/ ] 12700/33117 38%\r[======================/ ] 12900/33117 38%\r[=======================- ] 13000/33117 39%\r[=======================- ] 13200/33117 39%\r[=======================- ] 13300/33117 40%\r[=======================- ] 13400/33117 40%\r[========================- ] 13500/33117 40%\r[========================- ] 13600/33117 41%\r[========================- ] 13700/33117 41%\r[========================- ] 13800/33117 41%\r[===============
=========- ] 13900/33117 41%\r[========================- ] 14000/33117 42%\r[=========================- ] 14100/33117 42%\r[=========================/ ] 14300/33117 43%\r[=========================| ] 14400/33117 43%\r[==========================| ] 14700/33117 44%\r[==========================\ ] 15100/33117 45%\r[===========================| ] 15200/33117 45%\r[===========================| ] 15500/33117 46%\r[===========================| ] 15600/33117 47%\r[============================| ] 16000/33117 48%\r[============================| ] 16200/33117 48%\r[=============================-
] 16400/33117 49%\r[=============================- ] 16500/33117 49%\r[=============================- ] 16600/33117 50%\r[=============================-\0 ] 16700/33117 50%\r[=============================- ] 16800/33117 50%\r[==============================- ] 16900/33117 51%\r[==============================- ] 17000/33117 51%\r[==============================- ] 17100/33117 51%\r[==============================- ] 17200/33117 51%\r[==============================- ] 17300/33117 52%\r[===============================\ ] 17800/33117 53%\r[===============================\ ] 17900/33117 54%\r[================================\ ] 18000/33117 54%\r[========
========================/ ] 18100/33117 54%\r[================================\ ] 18300/33117 55%\r[================================\ ] 18400/33117 55%\r[=================================\ ] 18600/33117 56%\r[=================================| ] 18700/33117 56%\r[=================================| ] 18800/33117 56%\r[=================================| ] 18900/33117 57%\r[=================================| ] 19000/33117 57%\r[==================================| ] 19100/33117 57%\r[==================================| ] 19200/33117 57%\r[==================================| ] 19300/33117 58%\r[==================================| ] 19400/33117 58%\r[==================================|
] 19500/33117 58%\r[===================================| ] 19800/33117 59%\r[===================================| ] 19900/33117 60%\r[===================================/ ] 20200/33117 60%\0\r[====================================/ ] 20300/33117 61%\r[====================================- ] 20600/33117 62%\r[=====================================- ] 20800/33117 62%\r[=====================================| ] 20900/33117 63%\r[=====================================/ ] 21000/33117 63%\r[======================================- ] 21500/33117 64%\r[======================================- ] 21600/33117 65%\r[======================================- ] 21700/33117 65%\r[=======================================- ] 22000/33117 66%\r[=
======================================- ] 22100/33117 66%\r[=======================================- ] 22200/33117 67%\r[=======================================- ] 22300/33117 67%\r[=======================================- ] 22400/33117 67%\r[========================================- ] 22500/33117 67%\r[========================================- ] 22600/33117 68%\r[========================================- ] 22700/33117 68%\r[========================================/ ] 22900/33117 69%\r[========================================/ ] 23000/33117 69%\r[=========================================/ ] 23100/33117 69%\r[=========================================- ] 23300/33117 70%\r[==========================================- ] 24100/33117 72%\r[======================================
=====- ] 24400/33117 73%\r[============================================\ ] 24800/33117 74%\r[============================================\ ] 24900/33117 75%\r[============================================\ ] 25000/33117 75%\r[=============================================\\0 ] 25300/33117 76%\r[=============================================\ ] 25400/33117 76%\r[=============================================\ ] 25500/33117 76%\r[=============================================\ ] 25600/33117 77%\r[=============================================\ ] 25700/33117 77%\r[=============================================\ ] 25800/33117 77%\r[==============================================\ ] 25900/33117 78%\r[==============================================\ ] 26100/33117 78%\r[==============================================\ ] 26200/33117
79%\r[==============================================\ ] 26300/33117 79%\r[===============================================\ ] 26400/33117 79%\r[===============================================\ ] 26500/33117 80%\r[===============================================\ ] 26600/33117 80%\r[===============================================\ ] 26700/33117 80%\r[===============================================\ ] 26800/33117 80%\r[================================================\ ] 27100/33117 81%\r[================================================\ ] 27200/33117 82%\r[================================================\ ] 27300/33117 82%\r[================================================\ ] 27400/33117 82%\r[=================================================| ] 27600/33117 83%\r[=================================================| ] 27700/33117 83%\r[===============================
==================| ] 28000/33117 84%\r[==================================================| ] 28100/33117 84%\r[==================================================| ] 28200/33117 85%\r[==================================================| ] 28300/33117 85%\r[==================================================| ] 28400/33117 85%\r[==============\0====================================| ] 28500/33117 86%\r[==================================================| ] 28600/33117 86%\r[===================================================| ] 28700/33117 86%\r[===================================================| ] 28800/33117 86%\r[===================================================| ] 28900/33117 87%\r[===================================================| ] 29100/33117 87%\r[====================================================| ] 29200/33117 88%\r[====================================================| ] 29300
/33117 88%\r[====================================================| ] 29400/33117 88%\r[====================================================| ] 29600/33117 89%\r[====================================================| ] 29700/33117 89%\r[=====================================================| ] 29800/33117 89%\r[=====================================================| ] 30000/33117 90%\r[=====================================================| ] 30100/33117 90%\r[======================================================/ ] 30500/33117 92%\r[======================================================/ ] 30600/33117 92%\r[======================================================/ ] 30800/33117 93%\r[=======================================================/ ] 30900/33117 93%\r[=======================================================/ ] 31300/33117 94%\r[=======================================================/ ] 31400/33117 94%\r[========================
================================/ ] 31500/33117 95%\r[========================================================- ] 31900/33117 96%\r[=========================================================- ] 32000/33117 96%\r[=========================================================- ] 32100/33117 96%\r[=========================================================- ] 32200/33117 97%\r[=========================================================- ] \032300/33117 97%\r[=========================================================- ] 32400/33117 97%\r[=========================================================- ] 32500/33117 98%\r[==========================================================- ] 32600/33117 98%\r[==========================================================- ] 32700/33117 98%\r[==========================================================- ] 32800/33117 99%\r[==========================================================- ] 32900/33117 99%\r[==========================================================-
] 33000/33117 99%\r[==========================================================- ] 33100/33117 99%\r[===========================================================-] 33117/33117 100%
Exportable Squashfs 4.0 filesystem, gzip compressed, data block size 131072
compressed data, compressed metadata, compressed fragments, no xattrs
duplicates are removed
Filesystem size 165874.21 Kbytes (161.99 Mbytes)
25.05% of uncompressed filesystem size (662050.41 Kbytes)
Inode table size 340046 bytes (332.08 Kbytes)
28.43% of uncompressed inode table size (1196247 bytes)
Directory table size 324290 bytes (316.69 Kbytes)
44.30% of uncompressed directory table size (732029 bytes)
Number of duplicate files found 4053
Number of inodes 35285
Number of files 29955
Number of fragments 1803
Number of symbolic links 2664
Number of device nodes 271
Number of fifo nodes 0
Number of socket nodes 0
Number of directories 2395
Number of ids (unique uids + gids) 12
Number of uids 4
root (0)
man (13)
nobody (65534)
ntp (123)
Number of gids 10
root (0)
disk (6)
kmem (9)
tty (5)
unknown (248)
wheel (10)
utmp (406)
unknown (249)
portage (250)
ntp (123)
--- Running action sequence: setup_overlay
--- Running action sequence: create_iso
17500+0 records in
17500+0 records out
17920000 bytes (18 MB) copied, 0.10865 s, 165 MB/s
mkfs.fat 3.0.22 (2013-07-19)
>> Populating EFI image...
'/home/catalyst/builds/default/livecd-stage2-ia64-20140408//boot/System.map-gentoo' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140408//gentoo.efimg.mountPoint/System.map-gentoo'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140408//boot/efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140408//gentoo.efimg.mountPoint/efi'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140408//boot/efi/boot' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140408//gentoo.efimg.mountPoint/efi/boot'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140408//boot/efi/boot/gentoo.igz' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140408//gentoo.efimg.mountPoint/efi/boot/gentoo.igz'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140408//boot/efi/boot/bootia64.efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140408//gentoo.efimg.mountPoint/efi/boot/bootia64.efi'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140408//boot/efi/boot/elilo.msg' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140408//gentoo.efimg.mountPoint/efi/boot/elilo.msg'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140408//boot/efi/boot/gentoo' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140408//gentoo.efimg.mountPoint/efi/boot/gentoo'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140408//boot/efi/boot/elilo.conf' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140408//gentoo.efimg.mountPoint/efi/boot/elilo.conf'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140408//boot/elilo.conf' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140408//gentoo.efimg.mountPoint/elilo.conf'
'/home/catalyst/builds/default/livecd-stage2-ia64-20140408//boot/elilo.efi' -> '/home/catalyst/builds/default/livecd-stage2-ia64-20140408//gentoo.efimg.mountPoint/elilo.efi'
>> Removing /boot...
>> Running mkisofs to create iso image....
>> mkisofs -R -l -b gentoo.efimg -c boot.cat -no-emul-boot -J -V "Gentoo Linux IA64 20140408" -o /var/tmp/catalyst/builds/default/install-ia64-minimal-20140408.iso /home/catalyst/builds/default/livecd-stage2-ia64-20140408/
mkisofs: No such file or directory. Unable to open disc image file '/var/tmp/catalyst/builds/default/install-ia64-minimal-20140408.iso'.
Cannot make ISO image
!!! catalyst: ISO creation script failed.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1303, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1376, in create_iso
env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/livecd-stage2-ia64-20140408/.catalyst_lock'
Full build log at /tmp/catalyst-auto.29037/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2014-02-18 16:47 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2014-02-18 16:47 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.16
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage2
Building natively for ia64
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20140218/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20140218/
Location of the package cache is /var/tmp/catalyst/packages/default/livecd-stage2-ia64-20140218/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/livecd-stage2-ia64-20140218/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20140218/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20140218/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20140218/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /var/tmp/catalyst/tmp/default/livecd-stage1-ia64-20140218/
to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20140218/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
--- Running action sequence: build_kernel
Copying pre-kmerge.sh to ./tmp
copying pre-kmerge.sh to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20140218/./tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20140218/./tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20140218/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot genkernel
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) app-arch/cpio-2.11-r1
>>> Installing (1 of 2) app-arch/cpio-2.11-r1
>>> Emerging (2 of 2) sys-kernel/genkernel-3.4.45.1
>>> Installing (2 of 2) sys-kernel/genkernel-3.4.45.1
* Messages for package sys-kernel/genkernel-3.4.45.1:
* Copying files to /var/cache/genkernel/src...
* Documentation is available in the genkernel manual page
* as well as the following URL:
* http://www.gentoo.org/doc/en/genkernel.xml
* This package is known to not work with reiser4. If you are running
* reiser4 and have a problem, do not file a bug. We know it does not
* work and we don't plan on fixing it since reiser4 is the one that is
* broken in this regard. Try using a sane filesystem like ext3 or
* even reiser3.
* The LUKS support has changed from versions prior to 3.4.4. Now,
* you use crypt_root=/dev/blah instead of real_root=luks:/dev/blah.
* Local use flag 'crypt' has been renamed to 'cryptsetup' (bug #414523).
* Please set flag 'cryptsetup' for this very package if you would like
* to have genkernel create an initramfs with LUKS support.
* Sorry for the inconvenience.
removing /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20140218/./tmp/pre-kmerge.sh from the chroot
removing /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20140218/./tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to ./tmp
copying kmerge.sh to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20140218/./tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20140218/./tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20140218/
>>> Regenerating /etc/ld.so.cache...
Genkernel version 3.4.45.1 found ... continuing
emerge --quiet --update --newuse gentoo-sources
[ebuild N ] sys-libs/ncurses-5.9-r2 to /tmp/kerncache/gentoo/
[ebuild N ] virtual/libintl-0 to /tmp/kerncache/gentoo/
[ebuild N ] app-arch/bzip2-1.0.6-r3 to /tmp/kerncache/gentoo/
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/kerncache/gentoo/
[ebuild N ] sys-libs/readline-6.2_p1 to /tmp/kerncache/gentoo/
[ebuild N ] sys-devel/make-3.82-r4 to /tmp/kerncache/gentoo/
[ebuild N ] app-shells/bash-4.2_p45 to /tmp/kerncache/gentoo/
[ebuild N ] sys-apps/util-linux-2.22.2 to /tmp/kerncache/gentoo/
[ebuild N ] sys-apps/hwids-20130915.1 to /tmp/kerncache/gentoo/
[ebuild N ] sys-devel/bc-1.06.95 to /tmp/kerncache/gentoo/
[ebuild N ] sys-fs/udev-208 to /tmp/kerncache/gentoo/
[ebuild N ] virtual/udev-208 to /tmp/kerncache/gentoo/
[ebuild N ] virtual/dev-manager-0 to /tmp/kerncache/gentoo/
[ebuild N ] dev-lang/perl-5.16.3 to /tmp/kerncache/gentoo/
[ebuild N ] app-admin/perl-cleaner-2.7 to /tmp/kerncache/gentoo/
[ebuild N ] sys-kernel/gentoo-sources-3.10.25 to /tmp/kerncache/gentoo/
The following USE changes are necessary to proceed:
(see "package.use" in the portage(5) man page for more details)
# required by sys-fs/udev-208
# required by virtual/udev-208
# required by virtual/dev-manager-0
# required by sys-kernel/gentoo-sources-3.10.25[-build]
# required by gentoo-sources (argument)
=sys-apps/hwids-20130915.1 udev
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1427, in build_kernel
self._build_kernel(kname=kname)
File "modules/generic_stage_target.py", line 1471, in _build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1303, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1432, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20140218/.catalyst_lock'
Full build log at /tmp/catalyst-auto.24600/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2013-12-26 11:34 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2013-12-26 11:34 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging (4 of 15) sys-libs/zlib-1.2.7 for /tmp/kerncache/gentoo/
>>> Installing (4 of 15) sys-libs/zlib-1.2.7 to /tmp/kerncache/gentoo/
>>> Emerging (5 of 15) sys-libs/readline-6.2_p1 for /tmp/kerncache/gentoo/
>>> Installing (5 of 15) sys-libs/readline-6.2_p1 to /tmp/kerncache/gentoo/
>>> Emerging (6 of 15) sys-devel/make-3.82-r4 for /tmp/kerncache/gentoo/
>>> Installing (6 of 15) sys-devel/make-3.82-r4 to /tmp/kerncache/gentoo/
>>> Emerging (7 of 15) app-shells/bash-4.2_p45 for /tmp/kerncache/gentoo/
>>> Installing (7 of 15) app-shells/bash-4.2_p45 to /tmp/kerncache/gentoo/
>>> Emerging (8 of 15) sys-apps/util-linux-2.22.2 for /tmp/kerncache/gentoo/
>>> Installing (8 of 15) sys-apps/util-linux-2.22.2 to /tmp/kerncache/gentoo/
>>> Emerging (9 of 15) sys-devel/bc-1.06.95 for /tmp/kerncache/gentoo/
>>> Installing (9 of 15) sys-devel/bc-1.06.95 to /tmp/kerncache/gentoo/
>>> Emerging (10 of 15) sys-fs/udev-204 for /tmp/kerncache/gentoo/
>>> Installing (10 of 15) sys-fs/udev-204 to /tmp/kerncache/gentoo/
>>> Emerging (11 of 15) virtual/udev-200 for /tmp/kerncache/gentoo/
>>> Installing (11 of 15) virtual/udev-200 to /tmp/kerncache/gentoo/
>>> Emerging (12 of 15) virtual/dev-manager-0 for /tmp/kerncache/gentoo/
>>> Installing (12 of 15) virtual/dev-manager-0 to /tmp/kerncache/gentoo/
>>> Emerging (13 of 15) dev-lang/perl-5.16.3 for /tmp/kerncache/gentoo/
>>> Installing (13 of 15) dev-lang/perl-5.16.3 to /tmp/kerncache/gentoo/
>>> Emerging (14 of 15) app-admin/perl-cleaner-2.7 for /tmp/kerncache/gentoo/
>>> Installing (14 of 15) app-admin/perl-cleaner-2.7 to /tmp/kerncache/gentoo/
>>> Emerging (15 of 15) sys-kernel/gentoo-sources-3.10.7-r1 for /tmp/kerncache/gentoo/
>>> Installing (15 of 15) sys-kernel/gentoo-sources-3.10.7-r1 to /tmp/kerncache/gentoo/
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-apps/util-linux-2.22.2 merged to /tmp/kerncache/gentoo/:
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-fs/udev-204 merged to /tmp/kerncache/gentoo/:
* Unable to find kernel sources at /tmp/kerncache/gentoo/usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* The new predictable network interface names are used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use kernel commandline net.ifnames=0 to disable this feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-kernel/gentoo-sources-3.10.7-r1 merged to /tmp/kerncache/gentoo/:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: http://www.gentoo.org/doc/en/kernel-upgrade.xml
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.4.45.1^[[0m
^[[32;01m*^[[0m Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20131224 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20131224.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20131224.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20131224.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m3.10.7-gentoo-r1^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[33;01m*^[[0m ^[[0;01mWARNING^[[0m: No mounted /boot partition detected!
^[[33;01m*^[[0m Run mount /boot to mount it!
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 3.10.7-gentoo-r1 ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m Linux Kernel 3.10.7-gentoo-r1^[[0m for ia64^[[0m...
^[[31;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[31;01m*^[[0m ^[[1m^[[KWARNING^[[m^[[K: No mounted /boot partition detected!
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m SHIPPED scripts/kconfig/zconf.lex.c
^[[31;01m*^[[0m SHIPPED scripts/kconfig/zconf.hash.c
^[[31;01m*^[[0m HOSTCC scripts/kconfig/zconf.tab.o
^[[31;01m*^[[0m HOSTLD scripts/kconfig/conf
^[[31;01m*^[[0mscripts/kconfig/conf --oldconfig Kconfig
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mAltera FPGA firmware download module (ALTERA_STAPL) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mJFS filesystem support (JFS_FS) [N/m/y/?] n
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSelf test for the backtrace code (BACKTRACE_SELF_TEST) [N/m/y/?] n
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mForce weak per-cpu definitions (DEBUG_FORCE_WEAK_PER_CPU) [N/y/?] n
^[[31;01m*^[[0mDebug access to per_cpu maps (DEBUG_PER_CPU_MAPS) [N/y/?] n
^[[31;01m*^[[0mLinux Kernel Dump Test Tool Module (LKDTM) [N/m/y/?] n
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m HOSTCC scripts/basic/fixdep
^[[31;01m*^[[0m HOSTCC scripts/kconfig/conf.o
^[[31;01m*^[[0m HOSTCC scripts/kconfig/zconf.tab.o
^[[31;01m*^[[0m HOSTLD scripts/kconfig/conf
^[[31;01m*^[[0mscripts/kconfig/conf --silentoldconfig Kconfig
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/bounds.s
^[[31;01m*^[[0m GEN include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m GEN include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1181:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1220:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall kcmp not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m SHIPPED scripts/genksyms/keywords.hash.c
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m SHIPPED scripts/genksyms/parse.tab.h
^[[31;01m*^[[0m SHIPPED scripts/genksyms/parse.tab.c
^[[31;01m*^[[0m HOSTCC scripts/genksyms/lex.lex.o
^[[31;01m*^[[0m<stdin>:1181:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1220:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall kcmp not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/utsname_sysctl.o
^[[31;01m*^[[0m CC kernel/elfcore.o
^[[31;01m*^[[0m CC kernel/irq_work.o
^[[31;01m*^[[0m BC kernel/timeconst.h
^[[31;01m*^[[0m/bin/sh: bc: command not found
^[[31;01m*^[[0mmake[1]: *** [kernel/timeconst.h] ^[[1m^[[KError ^[[m^[[K127
^[[31;01m*^[[0mmake: *** [kernel] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20131224 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20131224.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20131224.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20131224.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1419, in build_kernel
self._build_kernel(kname=kname)
File "modules/generic_stage_target.py", line 1463, in _build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 226, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1295, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1424, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20131224/.catalyst_lock'
Full build log at /tmp/catalyst-auto.13515/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2013-12-11 20:59 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2013-12-11 20:59 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Installing (12 of 16) virtual/dev-manager-0 to /tmp/kerncache/gentoo/
>>> Emerging (13 of 16) sys-devel/libperl-5.10.1 for /tmp/kerncache/gentoo/
>>> Installing (13 of 16) sys-devel/libperl-5.10.1 to /tmp/kerncache/gentoo/
>>> Emerging (14 of 16) dev-lang/perl-5.12.4-r1 for /tmp/kerncache/gentoo/
>>> Installing (14 of 16) dev-lang/perl-5.12.4-r1 to /tmp/kerncache/gentoo/
>>> Emerging (15 of 16) app-admin/perl-cleaner-2.7 for /tmp/kerncache/gentoo/
>>> Installing (15 of 16) app-admin/perl-cleaner-2.7 to /tmp/kerncache/gentoo/
>>> Emerging (16 of 16) sys-kernel/gentoo-sources-3.10.7-r1 for /tmp/kerncache/gentoo/
>>> Installing (16 of 16) sys-kernel/gentoo-sources-3.10.7-r1 to /tmp/kerncache/gentoo/
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-apps/util-linux-2.22.2 merged to /tmp/kerncache/gentoo/:
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-fs/udev-204 merged to /tmp/kerncache/gentoo/:
* Unable to find kernel sources at /tmp/kerncache/gentoo/usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* The new predictable network interface names are used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use kernel commandline net.ifnames=0 to disable this feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-kernel/gentoo-sources-3.10.7-r1 merged to /tmp/kerncache/gentoo/:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: http://www.gentoo.org/doc/en/kernel-upgrade.xml
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.4.45.1^[[0m
^[[32;01m*^[[0m Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20131210 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20131210.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20131210.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20131210.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m3.10.7-gentoo-r1^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[33;01m*^[[0m ^[[0;01mWARNING^[[0m: No mounted /boot partition detected!
^[[33;01m*^[[0m Run mount /boot to mount it!
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 3.10.7-gentoo-r1 ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m Linux Kernel 3.10.7-gentoo-r1^[[0m for ia64^[[0m...
^[[31;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[31;01m*^[[0m ^[[1m^[[KWARNING^[[m^[[K: No mounted /boot partition detected!
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m SHIPPED scripts/kconfig/zconf.lex.c
^[[31;01m*^[[0m SHIPPED scripts/kconfig/zconf.hash.c
^[[31;01m*^[[0m HOSTCC scripts/kconfig/zconf.tab.o
^[[31;01m*^[[0m HOSTLD scripts/kconfig/conf
^[[31;01m*^[[0mscripts/kconfig/conf --oldconfig Kconfig
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mAltera FPGA firmware download module (ALTERA_STAPL) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mJFS filesystem support (JFS_FS) [N/m/y/?] n
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSelf test for the backtrace code (BACKTRACE_SELF_TEST) [N/m/y/?] n
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mForce weak per-cpu definitions (DEBUG_FORCE_WEAK_PER_CPU) [N/y/?] n
^[[31;01m*^[[0mDebug access to per_cpu maps (DEBUG_PER_CPU_MAPS) [N/y/?] n
^[[31;01m*^[[0mLinux Kernel Dump Test Tool Module (LKDTM) [N/m/y/?] n
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m HOSTCC scripts/basic/fixdep
^[[31;01m*^[[0m HOSTCC scripts/kconfig/conf.o
^[[31;01m*^[[0m HOSTCC scripts/kconfig/zconf.tab.o
^[[31;01m*^[[0m HOSTLD scripts/kconfig/conf
^[[31;01m*^[[0mscripts/kconfig/conf --silentoldconfig Kconfig
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/bounds.s
^[[31;01m*^[[0m GEN include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m GEN include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1181:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1220:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall kcmp not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m SHIPPED scripts/genksyms/keywords.hash.c
^[[31;01m*^[[0m SHIPPED scripts/genksyms/parse.tab.h
^[[31;01m*^[[0m SHIPPED scripts/genksyms/parse.tab.c
^[[31;01m*^[[0m HOSTCC scripts/genksyms/lex.lex.o
^[[31;01m*^[[0mscripts/genksyms/lex.lex.c_shipped: In function 'yylex1':
^[[31;01m*^[[0mscripts/genksyms/lex.lex.c_shipped:904:1: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'fwrite', declared with attribute warn_unused_result [-Wunused-result]
^[[31;01m*^[[0m<stdin>:1181:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1220:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall kcmp not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC arch/ia64/kernel/time.o
^[[31;01m*^[[0m CC kernel/exit.o
^[[31;01m*^[[0m CC arch/ia64/kernel/traps.o
^[[31;01m*^[[0m CC arch/ia64/kernel/unaligned.o
^[[31;01m*^[[0march/ia64/kernel/unaligned.c: In function 'ia64_handle_unaligned':
^[[31;01m*^[[0march/ia64/kernel/unaligned.c:1382:16: ^[[1m^[[Kwarning^[[m^[[K: 'u.l' may be used uninitialized in this function [-Wuninitialized]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/posix-timers.o
^[[31;01m*^[[0m CC kernel/kthread.o
^[[31;01m*^[[0m CC kernel/wait.o
^[[31;01m*^[[0m CC kernel/sys_ni.o
^[[31;01m*^[[0mmm/page_alloc.c: In function '__free_pages_ok.part.51':
^[[31;01m*^[[0mmm/page_alloc.c:589:31: ^[[1m^[[Kwarning^[[m^[[K: 'buddy' may be used uninitialized in this function [-Wuninitialized]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/utsname_sysctl.o
^[[31;01m*^[[0m CC kernel/elfcore.o
^[[31;01m*^[[0m CC kernel/irq_work.o
^[[31;01m*^[[0m BC kernel/timeconst.h
^[[31;01m*^[[0m/bin/sh: bc: command not found
^[[31;01m*^[[0mmake[1]: *** [kernel/timeconst.h] ^[[1m^[[KError ^[[m^[[K127
^[[31;01m*^[[0mmake: *** [kernel] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20131210 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20131210.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20131210.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20131210.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1419, in build_kernel
self._build_kernel(kname=kname)
File "modules/generic_stage_target.py", line 1463, in _build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 226, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1295, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1424, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20131210/.catalyst_lock'
Full build log at /tmp/catalyst-auto.3656/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2013-12-04 21:15 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2013-12-04 21:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Installing (12 of 16) virtual/dev-manager-0 to /tmp/kerncache/gentoo/
>>> Emerging (13 of 16) sys-devel/libperl-5.10.1 for /tmp/kerncache/gentoo/
>>> Installing (13 of 16) sys-devel/libperl-5.10.1 to /tmp/kerncache/gentoo/
>>> Emerging (14 of 16) dev-lang/perl-5.12.4-r1 for /tmp/kerncache/gentoo/
>>> Installing (14 of 16) dev-lang/perl-5.12.4-r1 to /tmp/kerncache/gentoo/
>>> Emerging (15 of 16) app-admin/perl-cleaner-2.7 for /tmp/kerncache/gentoo/
>>> Installing (15 of 16) app-admin/perl-cleaner-2.7 to /tmp/kerncache/gentoo/
>>> Emerging (16 of 16) sys-kernel/gentoo-sources-3.10.7-r1 for /tmp/kerncache/gentoo/
>>> Installing (16 of 16) sys-kernel/gentoo-sources-3.10.7-r1 to /tmp/kerncache/gentoo/
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-apps/util-linux-2.22.2 merged to /tmp/kerncache/gentoo/:
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-fs/udev-204 merged to /tmp/kerncache/gentoo/:
* Unable to find kernel sources at /tmp/kerncache/gentoo/usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* The new predictable network interface names are used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use kernel commandline net.ifnames=0 to disable this feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-kernel/gentoo-sources-3.10.7-r1 merged to /tmp/kerncache/gentoo/:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: http://www.gentoo.org/doc/en/kernel-upgrade.xml
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.4.45.1^[[0m
^[[32;01m*^[[0m Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20131203 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20131203.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20131203.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20131203.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m3.10.7-gentoo-r1^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[33;01m*^[[0m ^[[0;01mWARNING^[[0m: No mounted /boot partition detected!
^[[33;01m*^[[0m Run mount /boot to mount it!
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 3.10.7-gentoo-r1 ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m Linux Kernel 3.10.7-gentoo-r1^[[0m for ia64^[[0m...
^[[31;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[31;01m*^[[0m ^[[1m^[[KWARNING^[[m^[[K: No mounted /boot partition detected!
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m SHIPPED scripts/kconfig/zconf.lex.c
^[[31;01m*^[[0m SHIPPED scripts/kconfig/zconf.hash.c
^[[31;01m*^[[0m HOSTCC scripts/kconfig/zconf.tab.o
^[[31;01m*^[[0m HOSTLD scripts/kconfig/conf
^[[31;01m*^[[0mscripts/kconfig/conf --oldconfig Kconfig
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mAltera FPGA firmware download module (ALTERA_STAPL) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mJFS filesystem support (JFS_FS) [N/m/y/?] n
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSelf test for the backtrace code (BACKTRACE_SELF_TEST) [N/m/y/?] n
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mForce weak per-cpu definitions (DEBUG_FORCE_WEAK_PER_CPU) [N/y/?] n
^[[31;01m*^[[0mDebug access to per_cpu maps (DEBUG_PER_CPU_MAPS) [N/y/?] n
^[[31;01m*^[[0mLinux Kernel Dump Test Tool Module (LKDTM) [N/m/y/?] n
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m HOSTCC scripts/basic/fixdep
^[[31;01m*^[[0m HOSTCC scripts/kconfig/conf.o
^[[31;01m*^[[0m HOSTCC scripts/kconfig/zconf.tab.o
^[[31;01m*^[[0m HOSTLD scripts/kconfig/conf
^[[31;01m*^[[0mscripts/kconfig/conf --silentoldconfig Kconfig
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/bounds.s
^[[31;01m*^[[0m GEN include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m GEN include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1181:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1220:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall kcmp not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m SHIPPED scripts/genksyms/parse.tab.h
^[[31;01m*^[[0m SHIPPED scripts/genksyms/parse.tab.c
^[[31;01m*^[[0m HOSTCC scripts/genksyms/lex.lex.o
^[[31;01m*^[[0mscripts/genksyms/lex.lex.c_shipped: In function 'yylex1':
^[[31;01m*^[[0mscripts/genksyms/lex.lex.c_shipped:904:1: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'fwrite', declared with attribute warn_unused_result [-Wunused-result]
^[[31;01m*^[[0m<stdin>:1181:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1220:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall kcmp not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC arch/ia64/kernel/time.o
^[[31;01m*^[[0m CC arch/ia64/kernel/traps.o
^[[31;01m*^[[0m CC arch/ia64/kernel/unaligned.o
^[[31;01m*^[[0m CC kernel/itimer.o
^[[31;01m*^[[0march/ia64/kernel/unaligned.c: In function 'ia64_handle_unaligned':
^[[31;01m*^[[0march/ia64/kernel/unaligned.c:1382:16: ^[[1m^[[Kwarning^[[m^[[K: 'u.l' may be used uninitialized in this function [-Wuninitialized]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/kthread.o
^[[31;01m*^[[0m CC kernel/wait.o
^[[31;01m*^[[0m CC kernel/sys_ni.o
^[[31;01m*^[[0m CC kernel/posix-cpu-timers.o
^[[31;01m*^[[0mmm/page_alloc.c: In function '__free_pages_ok.part.51':
^[[31;01m*^[[0mmm/page_alloc.c:589:31: ^[[1m^[[Kwarning^[[m^[[K: 'buddy' may be used uninitialized in this function [-Wuninitialized]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC mm/mempolicy.o
^[[31;01m*^[[0m CC kernel/elfcore.o
^[[31;01m*^[[0m CC kernel/irq_work.o
^[[31;01m*^[[0m BC kernel/timeconst.h
^[[31;01m*^[[0m/bin/sh: bc: command not found
^[[31;01m*^[[0mmake[1]: *** [kernel/timeconst.h] ^[[1m^[[KError ^[[m^[[K127
^[[31;01m*^[[0mmake: *** [kernel] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20131203 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20131203.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20131203.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20131203.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1419, in build_kernel
self._build_kernel(kname=kname)
File "modules/generic_stage_target.py", line 1463, in _build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 226, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1295, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1424, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20131203/.catalyst_lock'
Full build log at /tmp/catalyst-auto.18444/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2013-11-27 20:50 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2013-11-27 20:50 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Making ExtUtils::Manifest (all)
Creating Makefile.PL in cpan/ExtUtils-Manifest for ExtUtils::Manifest
Running Makefile.PL in cpan/ExtUtils-Manifest
../../miniperl Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.so.5.12.4
Writing Makefile for ExtUtils::Manifest
make[1]: Entering directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/cpan/ExtUtils-Manifest'
make[1]: Leaving directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/cpan/ExtUtils-Manifest'
Making all in cpan/ExtUtils-Manifest
make all PERL_CORE=1 LIBPERL_A=libperl.so.5.12.4
make[1]: Entering directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/cpan/ExtUtils-Manifest'
cp lib/ExtUtils/MANIFEST.SKIP ../../lib/ExtUtils/MANIFEST.SKIP
cp lib/ExtUtils/Manifest.pm ../../lib/ExtUtils/Manifest.pm
make[1]: Leaving directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/cpan/ExtUtils-Manifest'
LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4 /var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/preload /var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/libperl.so.5.12.4 ./miniperl -Ilib make_ext.pl cpan/ExtUtils-ParseXS/pm_to_blib MAKE=make LIBPERL_A=libperl.so.5.12.4
Making ExtUtils::ParseXS (all)
Creating Makefile.PL in cpan/ExtUtils-ParseXS for ExtUtils::ParseXS
Running Makefile.PL in cpan/ExtUtils-ParseXS
../../miniperl Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.so.5.12.4
Writing Makefile for ExtUtils::ParseXS
make[1]: Entering directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/cpan/ExtUtils-ParseXS'
make[1]: Leaving directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/cpan/ExtUtils-ParseXS'
Making all in cpan/ExtUtils-ParseXS
make all PERL_CORE=1 LIBPERL_A=libperl.so.5.12.4
make[1]: Entering directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/cpan/ExtUtils-ParseXS'
cp lib/ExtUtils/ParseXS.pm ../../lib/ExtUtils/ParseXS.pm
cp lib/ExtUtils/xsubpp ../../lib/ExtUtils/xsubpp
make[1]: Leaving directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/cpan/ExtUtils-ParseXS'
LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4 /var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/preload /var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/libperl.so.5.12.4 ./miniperl -Ilib make_ext.pl cpan/File-Fetch/pm_to_blib MAKE=make LIBPERL_A=libperl.so.5.12.4
Making File::Fetch (all)
Creating Makefile.PL in cpan/File-Fetch for File::Fetch
Running Makefile.PL in cpan/File-Fetch
../../miniperl Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.so.5.12.4
Writing Makefile for File::Fetch
make[1]: Entering directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/cpan/File-Fetch'
make[1]: Leaving directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/cpan/File-Fetch'
Making all in cpan/File-Fetch
make all PERL_CORE=1 LIBPERL_A=libperl.so.5.12.4
make[1]: Entering directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/cpan/File-Fetch'
cp lib/File/Fetch.pm ../../lib/File/Fetch.pm
make[1]: Leaving directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/cpan/File-Fetch'
LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4 /var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/preload /var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/libperl.so.5.12.4 ./miniperl -Ilib make_ext.pl cpan/File-Path/pm_to_blib MAKE=make LIBPERL_A=libperl.so.5.12.4
Making File::Path (all)
Creating Makefile.PL in cpan/File-Path for File::Path
Running Makefile.PL in cpan/File-Path
../../miniperl Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.so.5.12.4
Writing Makefile for File::Path
make[1]: Entering directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/cpan/File-Path'
make[1]: Leaving directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/cpan/File-Path'
Making all in cpan/File-Path
make all PERL_CORE=1 LIBPERL_A=libperl.so.5.12.4
make[1]: Entering directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/cpan/File-Path'
cp lib/File/Path.pm ../../lib/File/Path.pm
make[1]: Leaving directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/cpan/File-Path'
LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4 /var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/preload /var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/libperl.so.5.12.4 ./miniperl -Ilib make_ext.pl cpan/File-Temp/pm_to_blib MAKE=make LIBPERL_A=libperl.so.5.12.4
Making File::Temp (all)
Creating Makefile.PL in cpan/File-Temp for File::Temp
Running Makefile.PL in cpan/File-Temp
../../miniperl Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.so.5.12.4
Writing Makefile for File::Temp
make[1]: Entering directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/cpan/File-Temp'
make[1]: Leaving directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/cpan/File-Temp'
Making all in cpan/File-Temp
make all PERL_CORE=1 LIBPERL_A=libperl.so.5.12.4
make[1]: Entering directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/cpan/File-Temp'
cp Temp.pm ../../lib/File/Temp.pm
make[1]: Leaving directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/cpan/File-Temp'
LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4 /var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/preload /var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/libperl.so.5.12.4 ./miniperl -Ilib make_ext.pl ext/FileCache/pm_to_blib MAKE=make LIBPERL_A=libperl.so.5.12.4
Making FileCache (all)
Creating Makefile.PL in ext/FileCache for FileCache
Running Makefile.PL in ext/FileCache
../../miniperl Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.so.5.12.4
Writing Makefile for FileCache
make[1]: Entering directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/ext/FileCache'
make[1]: Leaving directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/ext/FileCache'
Making all in ext/FileCache
make all PERL_CORE=1 LIBPERL_A=libperl.so.5.12.4
make[1]: Entering directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/ext/FileCache'
cp lib/FileCache.pm ../../lib/FileCache.pm
make[1]: Leaving directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/ext/FileCache'
LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4 /var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/preload /var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/libperl.so.5.12.4 ./miniperl -Ilib make_ext.pl dist/Filter-Simple/pm_to_blib MAKE=make LIBPERL_A=libperl.so.5.12.4
Making Filter::Simple (all)
Creating Makefile.PL in dist/Filter-Simple for Filter::Simple
Running Makefile.PL in dist/Filter-Simple
../../miniperl Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.so.5.12.4
Writing Makefile for Filter::Simple
make[1]: Entering directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/dist/Filter-Simple'
make[1]: Leaving directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/dist/Filter-Simple'
Making all in dist/Filter-Simple
make all PERL_CORE=1 LIBPERL_A=libperl.so.5.12.4
make[1]: Entering directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/dist/Filter-Simple'
cp lib/Filter/Simple.pm ../../lib/Filter/Simple.pm
make[1]: Leaving directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/dist/Filter-Simple'
LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4 /var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/preload /var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/libperl.so.5.12.4 ./miniperl -Ilib make_ext.pl cpan/Getopt-Long/pm_to_blib MAKE=make LIBPERL_A=libperl.so.5.12.4
Making Getopt::Long (all)
Creating Makefile.PL in cpan/Getopt-Long for Getopt::Long
Running Makefile.PL in cpan/Getopt-Long
../../miniperl Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.so.5.12.4
Writing Makefile for Getopt::Long
make[1]: Entering directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/cpan/Getopt-Long'
make[1]: Leaving directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/cpan/Getopt-Long'
Making all in cpan/Getopt-Long
make all PERL_CORE=1 LIBPERL_A=libperl.so.5.12.4
make[1]: Entering directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/cpan/Getopt-Long'
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Cannot copy 'lib/Getopt/Long.pm' to '../../lib/Getopt/Long.pm': No space left on device
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
at -e line 1
make[1]: *** [pm_to_blib] Error 28
make[1]: Leaving directory `/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4/cpan/Getopt-Long'
Unsuccessful make(cpan/Getopt-Long): code=512 at make_ext.pl line 449.
make: *** [cpan/Getopt-Long/pm_to_blib] Error 25
/usr/lib/portage/bin/isolated-functions.sh: line 246: echo: write error: No space left on device
* ERROR: dev-lang/perl-5.12.4-r1::gentoo failed (compile phase):
/usr/lib/portage/bin/isolated-functions.sh: line 246: echo: write error: No space left on device
* emake failed
/usr/lib/portage/bin/isolated-functions.sh: line 246: echo: write error: No space left on device
*
/usr/lib/portage/bin/isolated-functions.sh: line 246: echo: write error: No space left on device
* If you need support, post the output of `emerge --info '=dev-lang/perl-5.12.4-r1::gentoo'`,
/usr/lib/portage/bin/isolated-functions.sh: line 246: echo: write error: No space left on device
* the complete build log and the output of `emerge -pqv '=dev-lang/perl-5.12.4-r1::gentoo'`.
/usr/lib/portage/bin/isolated-functions.sh: line 246: echo: write error: No space left on device
* The complete build log is located at '/var/tmp/portage/dev-lang/perl-5.12.4-r1/temp/build.log'.
/usr/lib/portage/bin/isolated-functions.sh: line 246: echo: write error: No space left on device
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/perl-5.12.4-r1/temp/environment'.
/usr/lib/portage/bin/isolated-functions.sh: line 246: echo: write error: No space left on device
* Working directory: '/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4'
/usr/lib/portage/bin/isolated-functions.sh: line 246: echo: write error: No space left on device
* S: '/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4'
* Messages for package sys-apps/util-linux-2.22.2 merged to /tmp/kerncache/gentoo/:
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-fs/udev-204 merged to /tmp/kerncache/gentoo/:
* Unable to find kernel sources at /tmp/kerncache/gentoo/usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* The new predictable network interface names are used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use kernel commandline net.ifnames=0 to disable this feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1419, in build_kernel
self._build_kernel(kname=kname)
File "modules/generic_stage_target.py", line 1463, in _build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 226, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1295, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1424, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20131126/.catalyst_lock'
Full build log at /tmp/catalyst-auto.7484/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2013-11-20 21:07 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2013-11-20 21:07 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging (15 of 16) app-admin/perl-cleaner-2.7 for /tmp/kerncache/gentoo/
>>> Installing (15 of 16) app-admin/perl-cleaner-2.7 to /tmp/kerncache/gentoo/
>>> Emerging (16 of 16) sys-kernel/gentoo-sources-3.10.7-r1 for /tmp/kerncache/gentoo/
>>> Installing (16 of 16) sys-kernel/gentoo-sources-3.10.7-r1 to /tmp/kerncache/gentoo/
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-apps/util-linux-2.22.2 merged to /tmp/kerncache/gentoo/:
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-fs/udev-204 merged to /tmp/kerncache/gentoo/:
* Unable to find kernel sources at /tmp/kerncache/gentoo/usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* The new predictable network interface names are used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use kernel commandline net.ifnames=0 to disable this feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-kernel/gentoo-sources-3.10.7-r1 merged to /tmp/kerncache/gentoo/:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: http://www.gentoo.org/doc/en/kernel-upgrade.xml
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.4.45.1^[[0m
^[[32;01m*^[[0m Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20131119 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20131119.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20131119.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20131119.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m3.10.7-gentoo-r1^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[33;01m*^[[0m ^[[0;01mWARNING^[[0m: No mounted /boot partition detected!
^[[33;01m*^[[0m Run mount /boot to mount it!
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 3.10.7-gentoo-r1 ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m Linux Kernel 3.10.7-gentoo-r1^[[0m for ia64^[[0m...
^[[31;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[31;01m*^[[0m ^[[1m^[[KWARNING^[[m^[[K: No mounted /boot partition detected!
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m SHIPPED scripts/kconfig/zconf.lex.c
^[[31;01m*^[[0m SHIPPED scripts/kconfig/zconf.hash.c
^[[31;01m*^[[0m HOSTCC scripts/kconfig/zconf.tab.o
^[[31;01m*^[[0m HOSTLD scripts/kconfig/conf
^[[31;01m*^[[0mscripts/kconfig/conf --oldconfig Kconfig
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mAltera FPGA firmware download module (ALTERA_STAPL) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mJFS filesystem support (JFS_FS) [N/m/y/?] n
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSelf test for the backtrace code (BACKTRACE_SELF_TEST) [N/m/y/?] n
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mForce weak per-cpu definitions (DEBUG_FORCE_WEAK_PER_CPU) [N/y/?] n
^[[31;01m*^[[0mDebug access to per_cpu maps (DEBUG_PER_CPU_MAPS) [N/y/?] n
^[[31;01m*^[[0mLinux Kernel Dump Test Tool Module (LKDTM) [N/m/y/?] n
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m HOSTCC scripts/basic/fixdep
^[[31;01m*^[[0m HOSTCC scripts/kconfig/conf.o
^[[31;01m*^[[0m HOSTCC scripts/kconfig/zconf.tab.o
^[[31;01m*^[[0m HOSTLD scripts/kconfig/conf
^[[31;01m*^[[0mscripts/kconfig/conf --silentoldconfig Kconfig
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/bounds.s
^[[31;01m*^[[0m GEN include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m GEN include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1181:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1220:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall kcmp not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m SHIPPED scripts/genksyms/keywords.hash.c
^[[31;01m*^[[0m SHIPPED scripts/genksyms/parse.tab.h
^[[31;01m*^[[0m SHIPPED scripts/genksyms/parse.tab.c
^[[31;01m*^[[0m HOSTCC scripts/genksyms/lex.lex.o
^[[31;01m*^[[0mscripts/genksyms/lex.lex.c_shipped: In function 'yylex1':
^[[31;01m*^[[0mscripts/genksyms/lex.lex.c_shipped:904:1: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'fwrite', declared with attribute warn_unused_result [-Wunused-result]
^[[31;01m*^[[0m HOSTCC scripts/mod/sumversion.o
^[[31;01m*^[[0m HOSTCC scripts/genksyms/parse.tab.o
^[[31;01m*^[[0m HOSTCC scripts/mod/file2alias.o
^[[31;01m*^[[0m HOSTLD scripts/genksyms/genksyms
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1181:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1220:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall kcmp not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC arch/ia64/kernel/time.o
^[[31;01m*^[[0m CC kernel/exit.o
^[[31;01m*^[[0m CC arch/ia64/kernel/traps.o
^[[31;01m*^[[0m CC arch/ia64/kernel/unaligned.o
^[[31;01m*^[[0march/ia64/kernel/unaligned.c: In function 'ia64_handle_unaligned':
^[[31;01m*^[[0march/ia64/kernel/unaligned.c:1382:16: ^[[1m^[[Kwarning^[[m^[[K: 'u.l' may be used uninitialized in this function [-Wuninitialized]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/posix-timers.o
^[[31;01m*^[[0m CC kernel/kthread.o
^[[31;01m*^[[0m CC kernel/wait.o
^[[31;01m*^[[0m CC kernel/sys_ni.o
^[[31;01m*^[[0mmm/page_alloc.c: In function '__free_pages_ok.part.51':
^[[31;01m*^[[0mmm/page_alloc.c:589:31: ^[[1m^[[Kwarning^[[m^[[K: 'buddy' may be used uninitialized in this function [-Wuninitialized]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/elfcore.o
^[[31;01m*^[[0m CC kernel/irq_work.o
^[[31;01m*^[[0m CC mm/slab.o
^[[31;01m*^[[0m BC kernel/timeconst.h
^[[31;01m*^[[0m/bin/sh: bc: command not found
^[[31;01m*^[[0mmake[1]: *** [kernel/timeconst.h] ^[[1m^[[KError ^[[m^[[K127
^[[31;01m*^[[0mmake: *** [kernel] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20131119 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20131119.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20131119.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20131119.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1419, in build_kernel
self._build_kernel(kname=kname)
File "modules/generic_stage_target.py", line 1463, in _build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 226, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1295, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1424, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20131119/.catalyst_lock'
Full build log at /tmp/catalyst-auto.28600/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2013-11-13 21:10 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2013-11-13 21:10 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging (15 of 16) app-admin/perl-cleaner-2.7 for /tmp/kerncache/gentoo/
>>> Installing (15 of 16) app-admin/perl-cleaner-2.7 to /tmp/kerncache/gentoo/
>>> Emerging (16 of 16) sys-kernel/gentoo-sources-3.10.7-r1 for /tmp/kerncache/gentoo/
>>> Installing (16 of 16) sys-kernel/gentoo-sources-3.10.7-r1 to /tmp/kerncache/gentoo/
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-apps/util-linux-2.22.2 merged to /tmp/kerncache/gentoo/:
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-fs/udev-204 merged to /tmp/kerncache/gentoo/:
* Unable to find kernel sources at /tmp/kerncache/gentoo/usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* The new predictable network interface names are used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use kernel commandline net.ifnames=0 to disable this feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-kernel/gentoo-sources-3.10.7-r1 merged to /tmp/kerncache/gentoo/:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: http://www.gentoo.org/doc/en/kernel-upgrade.xml
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.4.45.1^[[0m
^[[32;01m*^[[0m Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20131112 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20131112.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20131112.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20131112.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m3.10.7-gentoo-r1^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[33;01m*^[[0m ^[[0;01mWARNING^[[0m: No mounted /boot partition detected!
^[[33;01m*^[[0m Run mount /boot to mount it!
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 3.10.7-gentoo-r1 ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m Linux Kernel 3.10.7-gentoo-r1^[[0m for ia64^[[0m...
^[[31;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[31;01m*^[[0m ^[[1m^[[KWARNING^[[m^[[K: No mounted /boot partition detected!
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m SHIPPED scripts/kconfig/zconf.lex.c
^[[31;01m*^[[0m SHIPPED scripts/kconfig/zconf.hash.c
^[[31;01m*^[[0m HOSTCC scripts/kconfig/zconf.tab.o
^[[31;01m*^[[0m HOSTLD scripts/kconfig/conf
^[[31;01m*^[[0mscripts/kconfig/conf --oldconfig Kconfig
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mAltera FPGA firmware download module (ALTERA_STAPL) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mJFS filesystem support (JFS_FS) [N/m/y/?] n
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSelf test for the backtrace code (BACKTRACE_SELF_TEST) [N/m/y/?] n
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mForce weak per-cpu definitions (DEBUG_FORCE_WEAK_PER_CPU) [N/y/?] n
^[[31;01m*^[[0mDebug access to per_cpu maps (DEBUG_PER_CPU_MAPS) [N/y/?] n
^[[31;01m*^[[0mLinux Kernel Dump Test Tool Module (LKDTM) [N/m/y/?] n
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m HOSTCC scripts/basic/fixdep
^[[31;01m*^[[0m HOSTCC scripts/kconfig/conf.o
^[[31;01m*^[[0m HOSTCC scripts/kconfig/zconf.tab.o
^[[31;01m*^[[0m HOSTLD scripts/kconfig/conf
^[[31;01m*^[[0mscripts/kconfig/conf --silentoldconfig Kconfig
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/bounds.s
^[[31;01m*^[[0m GEN include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m GEN include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1181:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1220:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall kcmp not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m SHIPPED scripts/genksyms/keywords.hash.c
^[[31;01m*^[[0m SHIPPED scripts/genksyms/parse.tab.h
^[[31;01m*^[[0m SHIPPED scripts/genksyms/parse.tab.c
^[[31;01m*^[[0m HOSTCC scripts/genksyms/lex.lex.o
^[[31;01m*^[[0mscripts/genksyms/lex.lex.c_shipped: In function 'yylex1':
^[[31;01m*^[[0mscripts/genksyms/lex.lex.c_shipped:904:1: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'fwrite', declared with attribute warn_unused_result [-Wunused-result]
^[[31;01m*^[[0m HOSTCC scripts/mod/sumversion.o
^[[31;01m*^[[0m HOSTCC scripts/mod/file2alias.o
^[[31;01m*^[[0m HOSTCC scripts/genksyms/parse.tab.o
^[[31;01m*^[[0m HOSTLD scripts/genksyms/genksyms
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1181:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1220:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall kcmp not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC arch/ia64/kernel/time.o
^[[31;01m*^[[0m CC kernel/exit.o
^[[31;01m*^[[0m CC arch/ia64/kernel/traps.o
^[[31;01m*^[[0m CC arch/ia64/kernel/unaligned.o
^[[31;01m*^[[0march/ia64/kernel/unaligned.c: In function 'ia64_handle_unaligned':
^[[31;01m*^[[0march/ia64/kernel/unaligned.c:1382:16: ^[[1m^[[Kwarning^[[m^[[K: 'u.l' may be used uninitialized in this function [-Wuninitialized]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/kthread.o
^[[31;01m*^[[0m CC kernel/wait.o
^[[31;01m*^[[0m CC kernel/sys_ni.o
^[[31;01m*^[[0m CC kernel/posix-cpu-timers.o
^[[31;01m*^[[0mmm/page_alloc.c: In function '__free_pages_ok.part.51':
^[[31;01m*^[[0mmm/page_alloc.c:589:31: ^[[1m^[[Kwarning^[[m^[[K: 'buddy' may be used uninitialized in this function [-Wuninitialized]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/utsname_sysctl.o
^[[31;01m*^[[0m CC kernel/elfcore.o
^[[31;01m*^[[0m CC kernel/irq_work.o
^[[31;01m*^[[0m BC kernel/timeconst.h
^[[31;01m*^[[0m/bin/sh: bc: command not found
^[[31;01m*^[[0mmake[1]: *** [kernel/timeconst.h] ^[[1m^[[KError ^[[m^[[K127
^[[31;01m*^[[0mmake: *** [kernel] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20131112 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20131112.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20131112.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20131112.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1419, in build_kernel
self._build_kernel(kname=kname)
File "modules/generic_stage_target.py", line 1463, in _build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 226, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1295, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1424, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20131112/.catalyst_lock'
Full build log at /tmp/catalyst-auto.17779/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2013-10-30 21:11 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2013-10-30 21:11 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Installing (12 of 16) virtual/dev-manager-0 to /tmp/kerncache/gentoo/
>>> Emerging (13 of 16) sys-devel/libperl-5.10.1 for /tmp/kerncache/gentoo/
>>> Installing (13 of 16) sys-devel/libperl-5.10.1 to /tmp/kerncache/gentoo/
>>> Emerging (14 of 16) dev-lang/perl-5.12.4-r1 for /tmp/kerncache/gentoo/
>>> Installing (14 of 16) dev-lang/perl-5.12.4-r1 to /tmp/kerncache/gentoo/
>>> Emerging (15 of 16) app-admin/perl-cleaner-2.7 for /tmp/kerncache/gentoo/
>>> Installing (15 of 16) app-admin/perl-cleaner-2.7 to /tmp/kerncache/gentoo/
>>> Emerging (16 of 16) sys-kernel/gentoo-sources-3.10.7-r1 for /tmp/kerncache/gentoo/
>>> Installing (16 of 16) sys-kernel/gentoo-sources-3.10.7-r1 to /tmp/kerncache/gentoo/
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-apps/util-linux-2.22.2 merged to /tmp/kerncache/gentoo/:
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-fs/udev-204 merged to /tmp/kerncache/gentoo/:
* Unable to find kernel sources at /tmp/kerncache/gentoo/usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* The new predictable network interface names are used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use kernel commandline net.ifnames=0 to disable this feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-kernel/gentoo-sources-3.10.7-r1 merged to /tmp/kerncache/gentoo/:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: http://www.gentoo.org/doc/en/kernel-upgrade.xml
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.4.45.1^[[0m
^[[32;01m*^[[0m Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20131029 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20131029.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20131029.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20131029.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m3.10.7-gentoo-r1^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[33;01m*^[[0m ^[[0;01mWARNING^[[0m: No mounted /boot partition detected!
^[[33;01m*^[[0m Run mount /boot to mount it!
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 3.10.7-gentoo-r1 ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m Linux Kernel 3.10.7-gentoo-r1^[[0m for ia64^[[0m...
^[[31;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[31;01m*^[[0m ^[[1m^[[KWARNING^[[m^[[K: No mounted /boot partition detected!
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m SHIPPED scripts/kconfig/zconf.lex.c
^[[31;01m*^[[0m SHIPPED scripts/kconfig/zconf.hash.c
^[[31;01m*^[[0m HOSTCC scripts/kconfig/zconf.tab.o
^[[31;01m*^[[0m HOSTLD scripts/kconfig/conf
^[[31;01m*^[[0mscripts/kconfig/conf --oldconfig Kconfig
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mAltera FPGA firmware download module (ALTERA_STAPL) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mJFS filesystem support (JFS_FS) [N/m/y/?] n
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSelf test for the backtrace code (BACKTRACE_SELF_TEST) [N/m/y/?] n
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mForce weak per-cpu definitions (DEBUG_FORCE_WEAK_PER_CPU) [N/y/?] n
^[[31;01m*^[[0mDebug access to per_cpu maps (DEBUG_PER_CPU_MAPS) [N/y/?] n
^[[31;01m*^[[0mLinux Kernel Dump Test Tool Module (LKDTM) [N/m/y/?] n
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m HOSTCC scripts/basic/fixdep
^[[31;01m*^[[0m HOSTCC scripts/kconfig/conf.o
^[[31;01m*^[[0m HOSTCC scripts/kconfig/zconf.tab.o
^[[31;01m*^[[0m HOSTLD scripts/kconfig/conf
^[[31;01m*^[[0mscripts/kconfig/conf --silentoldconfig Kconfig
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/bounds.s
^[[31;01m*^[[0m GEN include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m GEN include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1181:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1220:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall kcmp not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m SHIPPED scripts/genksyms/parse.tab.h
^[[31;01m*^[[0m SHIPPED scripts/genksyms/parse.tab.c
^[[31;01m*^[[0m HOSTCC scripts/genksyms/lex.lex.o
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0mscripts/genksyms/lex.lex.c_shipped: In function 'yylex1':
^[[31;01m*^[[0mscripts/genksyms/lex.lex.c_shipped:904:1: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'fwrite', declared with attribute warn_unused_result [-Wunused-result]
^[[31;01m*^[[0m<stdin>:1181:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1220:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall kcmp not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/exit.o
^[[31;01m*^[[0m CC arch/ia64/kernel/traps.o
^[[31;01m*^[[0m CC arch/ia64/kernel/unaligned.o
^[[31;01m*^[[0m CC kernel/itimer.o
^[[31;01m*^[[0march/ia64/kernel/unaligned.c: In function 'ia64_handle_unaligned':
^[[31;01m*^[[0march/ia64/kernel/unaligned.c:1382:16: ^[[1m^[[Kwarning^[[m^[[K: 'u.l' may be used uninitialized in this function [-Wuninitialized]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/kthread.o
^[[31;01m*^[[0m CC kernel/wait.o
^[[31;01m*^[[0m CC kernel/sys_ni.o
^[[31;01m*^[[0m CC kernel/posix-cpu-timers.o
^[[31;01m*^[[0mmm/page_alloc.c: In function '__free_pages_ok.part.51':
^[[31;01m*^[[0mmm/page_alloc.c:589:31: ^[[1m^[[Kwarning^[[m^[[K: 'buddy' may be used uninitialized in this function [-Wuninitialized]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/utsname_sysctl.o
^[[31;01m*^[[0m CC kernel/elfcore.o
^[[31;01m*^[[0m CC kernel/irq_work.o
^[[31;01m*^[[0m BC kernel/timeconst.h
^[[31;01m*^[[0m/bin/sh: bc: command not found
^[[31;01m*^[[0mmake[1]: *** [kernel/timeconst.h] ^[[1m^[[KError ^[[m^[[K127
^[[31;01m*^[[0mmake: *** [kernel] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20131029 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20131029.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20131029.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20131029.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1419, in build_kernel
self._build_kernel(kname=kname)
File "modules/generic_stage_target.py", line 1463, in _build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 226, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1295, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1424, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20131029/.catalyst_lock'
Full build log at /tmp/catalyst-auto.15172/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2013-10-23 21:28 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2013-10-23 21:28 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging (13 of 16) sys-devel/libperl-5.10.1 for /tmp/kerncache/gentoo/
>>> Installing (13 of 16) sys-devel/libperl-5.10.1 to /tmp/kerncache/gentoo/
>>> Emerging (14 of 16) dev-lang/perl-5.12.4-r1 for /tmp/kerncache/gentoo/
>>> Installing (14 of 16) dev-lang/perl-5.12.4-r1 to /tmp/kerncache/gentoo/
>>> Emerging (15 of 16) app-admin/perl-cleaner-2.7 for /tmp/kerncache/gentoo/
>>> Installing (15 of 16) app-admin/perl-cleaner-2.7 to /tmp/kerncache/gentoo/
>>> Emerging (16 of 16) sys-kernel/gentoo-sources-3.10.7-r1 for /tmp/kerncache/gentoo/
>>> Installing (16 of 16) sys-kernel/gentoo-sources-3.10.7-r1 to /tmp/kerncache/gentoo/
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-apps/util-linux-2.22.2 merged to /tmp/kerncache/gentoo/:
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-fs/udev-204 merged to /tmp/kerncache/gentoo/:
* Unable to find kernel sources at /tmp/kerncache/gentoo/usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* The new predictable network interface names are used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use kernel commandline net.ifnames=0 to disable this feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-kernel/gentoo-sources-3.10.7-r1 merged to /tmp/kerncache/gentoo/:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: http://www.gentoo.org/doc/en/kernel-upgrade.xml
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.4.45.1^[[0m
^[[32;01m*^[[0m Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20131022 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20131022.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20131022.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20131022.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m3.10.7-gentoo-r1^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[33;01m*^[[0m ^[[0;01mWARNING^[[0m: No mounted /boot partition detected!
^[[33;01m*^[[0m Run mount /boot to mount it!
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 3.10.7-gentoo-r1 ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m Linux Kernel 3.10.7-gentoo-r1^[[0m for ia64^[[0m...
^[[31;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[31;01m*^[[0m ^[[1m^[[KWARNING^[[m^[[K: No mounted /boot partition detected!
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m SHIPPED scripts/kconfig/zconf.lex.c
^[[31;01m*^[[0m SHIPPED scripts/kconfig/zconf.hash.c
^[[31;01m*^[[0m HOSTCC scripts/kconfig/zconf.tab.o
^[[31;01m*^[[0m HOSTLD scripts/kconfig/conf
^[[31;01m*^[[0mscripts/kconfig/conf --oldconfig Kconfig
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mAltera FPGA firmware download module (ALTERA_STAPL) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mJFS filesystem support (JFS_FS) [N/m/y/?] n
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSelf test for the backtrace code (BACKTRACE_SELF_TEST) [N/m/y/?] n
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mForce weak per-cpu definitions (DEBUG_FORCE_WEAK_PER_CPU) [N/y/?] n
^[[31;01m*^[[0mDebug access to per_cpu maps (DEBUG_PER_CPU_MAPS) [N/y/?] n
^[[31;01m*^[[0mLinux Kernel Dump Test Tool Module (LKDTM) [N/m/y/?] n
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m HOSTCC scripts/basic/fixdep
^[[31;01m*^[[0m HOSTCC scripts/kconfig/conf.o
^[[31;01m*^[[0m HOSTCC scripts/kconfig/zconf.tab.o
^[[31;01m*^[[0m HOSTLD scripts/kconfig/conf
^[[31;01m*^[[0mscripts/kconfig/conf --silentoldconfig Kconfig
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/bounds.s
^[[31;01m*^[[0m GEN include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m GEN include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1181:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1220:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall kcmp not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m SHIPPED scripts/genksyms/keywords.hash.c
^[[31;01m*^[[0m SHIPPED scripts/genksyms/parse.tab.h
^[[31;01m*^[[0m SHIPPED scripts/genksyms/parse.tab.c
^[[31;01m*^[[0m HOSTCC scripts/genksyms/lex.lex.o
^[[31;01m*^[[0mscripts/genksyms/lex.lex.c_shipped: In function 'yylex1':
^[[31;01m*^[[0mscripts/genksyms/lex.lex.c_shipped:904:1: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'fwrite', declared with attribute warn_unused_result [-Wunused-result]
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1181:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1220:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall kcmp not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC arch/ia64/kernel/time.o
^[[31;01m*^[[0m CC arch/ia64/kernel/traps.o
^[[31;01m*^[[0m CC arch/ia64/kernel/unaligned.o
^[[31;01m*^[[0m CC arch/ia64/kernel/unwind.o
^[[31;01m*^[[0march/ia64/kernel/unaligned.c: In function 'ia64_handle_unaligned':
^[[31;01m*^[[0march/ia64/kernel/unaligned.c:1382:16: ^[[1m^[[Kwarning^[[m^[[K: 'u.l' may be used uninitialized in this function [-Wuninitialized]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/itimer.o
^[[31;01m*^[[0m HZFILE kernel/hz.bc
^[[31;01m*^[[0m CC kernel/softirq.o
^[[31;01m*^[[0m CC kernel/resource.o
^[[31;01m*^[[0mmm/page_alloc.c: In function '__free_pages_ok.part.51':
^[[31;01m*^[[0mmm/page_alloc.c:589:31: ^[[1m^[[Kwarning^[[m^[[K: 'buddy' may be used uninitialized in this function [-Wuninitialized]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/utsname_sysctl.o
^[[31;01m*^[[0m CC kernel/elfcore.o
^[[31;01m*^[[0m CC kernel/irq_work.o
^[[31;01m*^[[0m BC kernel/timeconst.h
^[[31;01m*^[[0m/bin/sh: bc: command not found
^[[31;01m*^[[0mmake[1]: *** [kernel/timeconst.h] ^[[1m^[[KError ^[[m^[[K127
^[[31;01m*^[[0mmake: *** [kernel] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20131022 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20131022.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20131022.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20131022.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1419, in build_kernel
self._build_kernel(kname=kname)
File "modules/generic_stage_target.py", line 1463, in _build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 226, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1295, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1424, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20131022/.catalyst_lock'
Full build log at /tmp/catalyst-auto.4544/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2013-10-16 21:12 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2013-10-16 21:12 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Installing (12 of 16) virtual/dev-manager-0 to /tmp/kerncache/gentoo/
>>> Emerging (13 of 16) sys-devel/libperl-5.10.1 for /tmp/kerncache/gentoo/
>>> Installing (13 of 16) sys-devel/libperl-5.10.1 to /tmp/kerncache/gentoo/
>>> Emerging (14 of 16) dev-lang/perl-5.12.4-r1 for /tmp/kerncache/gentoo/
>>> Installing (14 of 16) dev-lang/perl-5.12.4-r1 to /tmp/kerncache/gentoo/
>>> Emerging (15 of 16) app-admin/perl-cleaner-2.7 for /tmp/kerncache/gentoo/
>>> Installing (15 of 16) app-admin/perl-cleaner-2.7 to /tmp/kerncache/gentoo/
>>> Emerging (16 of 16) sys-kernel/gentoo-sources-3.10.7-r1 for /tmp/kerncache/gentoo/
>>> Installing (16 of 16) sys-kernel/gentoo-sources-3.10.7-r1 to /tmp/kerncache/gentoo/
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-apps/util-linux-2.22.2 merged to /tmp/kerncache/gentoo/:
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-fs/udev-204 merged to /tmp/kerncache/gentoo/:
* Unable to find kernel sources at /tmp/kerncache/gentoo/usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* The new predictable network interface names are used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use kernel commandline net.ifnames=0 to disable this feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-kernel/gentoo-sources-3.10.7-r1 merged to /tmp/kerncache/gentoo/:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: http://www.gentoo.org/doc/en/kernel-upgrade.xml
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.4.45.1^[[0m
^[[32;01m*^[[0m Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20131015 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20131015.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20131015.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20131015.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m3.10.7-gentoo-r1^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[33;01m*^[[0m ^[[0;01mWARNING^[[0m: No mounted /boot partition detected!
^[[33;01m*^[[0m Run mount /boot to mount it!
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 3.10.7-gentoo-r1 ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m Linux Kernel 3.10.7-gentoo-r1^[[0m for ia64^[[0m...
^[[31;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[31;01m*^[[0m ^[[1m^[[KWARNING^[[m^[[K: No mounted /boot partition detected!
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m SHIPPED scripts/kconfig/zconf.lex.c
^[[31;01m*^[[0m SHIPPED scripts/kconfig/zconf.hash.c
^[[31;01m*^[[0m HOSTCC scripts/kconfig/zconf.tab.o
^[[31;01m*^[[0m HOSTLD scripts/kconfig/conf
^[[31;01m*^[[0mscripts/kconfig/conf --oldconfig Kconfig
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mAltera FPGA firmware download module (ALTERA_STAPL) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mJFS filesystem support (JFS_FS) [N/m/y/?] n
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSelf test for the backtrace code (BACKTRACE_SELF_TEST) [N/m/y/?] n
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mForce weak per-cpu definitions (DEBUG_FORCE_WEAK_PER_CPU) [N/y/?] n
^[[31;01m*^[[0mDebug access to per_cpu maps (DEBUG_PER_CPU_MAPS) [N/y/?] n
^[[31;01m*^[[0mLinux Kernel Dump Test Tool Module (LKDTM) [N/m/y/?] n
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m HOSTCC scripts/basic/fixdep
^[[31;01m*^[[0m HOSTCC scripts/kconfig/conf.o
^[[31;01m*^[[0m HOSTCC scripts/kconfig/zconf.tab.o
^[[31;01m*^[[0m HOSTLD scripts/kconfig/conf
^[[31;01m*^[[0mscripts/kconfig/conf --silentoldconfig Kconfig
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/bounds.s
^[[31;01m*^[[0m GEN include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m GEN include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1181:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1220:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall kcmp not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m SHIPPED scripts/genksyms/parse.tab.h
^[[31;01m*^[[0m SHIPPED scripts/genksyms/parse.tab.c
^[[31;01m*^[[0m HOSTCC scripts/genksyms/lex.lex.o
^[[31;01m*^[[0mscripts/genksyms/lex.lex.c_shipped: In function 'yylex1':
^[[31;01m*^[[0mscripts/genksyms/lex.lex.c_shipped:904:1: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'fwrite', declared with attribute warn_unused_result [-Wunused-result]
^[[31;01m*^[[0m<stdin>:1181:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1220:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall kcmp not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC arch/ia64/kernel/time.o
^[[31;01m*^[[0m CC kernel/exit.o
^[[31;01m*^[[0m CC arch/ia64/kernel/traps.o
^[[31;01m*^[[0m CC arch/ia64/kernel/unaligned.o
^[[31;01m*^[[0march/ia64/kernel/unaligned.c: In function 'ia64_handle_unaligned':
^[[31;01m*^[[0march/ia64/kernel/unaligned.c:1382:16: ^[[1m^[[Kwarning^[[m^[[K: 'u.l' may be used uninitialized in this function [-Wuninitialized]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/kthread.o
^[[31;01m*^[[0m CC kernel/wait.o
^[[31;01m*^[[0m CC kernel/sys_ni.o
^[[31;01m*^[[0m CC kernel/posix-cpu-timers.o
^[[31;01m*^[[0mmm/page_alloc.c: In function '__free_pages_ok.part.51':
^[[31;01m*^[[0mmm/page_alloc.c:589:31: ^[[1m^[[Kwarning^[[m^[[K: 'buddy' may be used uninitialized in this function [-Wuninitialized]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/utsname_sysctl.o
^[[31;01m*^[[0m CC kernel/elfcore.o
^[[31;01m*^[[0m CC kernel/irq_work.o
^[[31;01m*^[[0m BC kernel/timeconst.h
^[[31;01m*^[[0m/bin/sh: bc: command not found
^[[31;01m*^[[0mmake[1]: *** [kernel/timeconst.h] ^[[1m^[[KError ^[[m^[[K127
^[[31;01m*^[[0mmake: *** [kernel] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20131015 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20131015.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20131015.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20131015.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1419, in build_kernel
self._build_kernel(kname=kname)
File "modules/generic_stage_target.py", line 1463, in _build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 226, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1295, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1424, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20131015/.catalyst_lock'
Full build log at /tmp/catalyst-auto.9993/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2013-09-18 21:50 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2013-09-18 21:50 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Installing (12 of 16) virtual/dev-manager-0 to /tmp/kerncache/gentoo/
>>> Emerging (13 of 16) sys-devel/libperl-5.10.1 for /tmp/kerncache/gentoo/
>>> Installing (13 of 16) sys-devel/libperl-5.10.1 to /tmp/kerncache/gentoo/
>>> Emerging (14 of 16) dev-lang/perl-5.12.4-r1 for /tmp/kerncache/gentoo/
>>> Installing (14 of 16) dev-lang/perl-5.12.4-r1 to /tmp/kerncache/gentoo/
>>> Emerging (15 of 16) app-admin/perl-cleaner-2.7 for /tmp/kerncache/gentoo/
>>> Installing (15 of 16) app-admin/perl-cleaner-2.7 to /tmp/kerncache/gentoo/
>>> Emerging (16 of 16) sys-kernel/gentoo-sources-3.10.7 for /tmp/kerncache/gentoo/
>>> Installing (16 of 16) sys-kernel/gentoo-sources-3.10.7 to /tmp/kerncache/gentoo/
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-apps/util-linux-2.22.2 merged to /tmp/kerncache/gentoo/:
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-fs/udev-204 merged to /tmp/kerncache/gentoo/:
* Unable to find kernel sources at /tmp/kerncache/gentoo/usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* The new predictable network interface names are used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use kernel commandline net.ifnames=0 to disable this feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-kernel/gentoo-sources-3.10.7 merged to /tmp/kerncache/gentoo/:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: http://www.gentoo.org/doc/en/kernel-upgrade.xml
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.4.45.1^[[0m
^[[32;01m*^[[0m Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20130917 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20130917.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20130917.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20130917.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m3.10.7-gentoo^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[33;01m*^[[0m ^[[0;01mWARNING^[[0m: No mounted /boot partition detected!
^[[33;01m*^[[0m Run mount /boot to mount it!
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 3.10.7-gentoo ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m Linux Kernel 3.10.7-gentoo^[[0m for ia64^[[0m...
^[[31;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[31;01m*^[[0m ^[[1m^[[KWARNING^[[m^[[K: No mounted /boot partition detected!
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m SHIPPED scripts/kconfig/zconf.lex.c
^[[31;01m*^[[0m SHIPPED scripts/kconfig/zconf.hash.c
^[[31;01m*^[[0m HOSTCC scripts/kconfig/zconf.tab.o
^[[31;01m*^[[0m HOSTLD scripts/kconfig/conf
^[[31;01m*^[[0mscripts/kconfig/conf --oldconfig Kconfig
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mAltera FPGA firmware download module (ALTERA_STAPL) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mJFS filesystem support (JFS_FS) [N/m/y/?] n
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSelf test for the backtrace code (BACKTRACE_SELF_TEST) [N/m/y/?] n
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mForce weak per-cpu definitions (DEBUG_FORCE_WEAK_PER_CPU) [N/y/?] n
^[[31;01m*^[[0mDebug access to per_cpu maps (DEBUG_PER_CPU_MAPS) [N/y/?] n
^[[31;01m*^[[0mLinux Kernel Dump Test Tool Module (LKDTM) [N/m/y/?] n
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m HOSTCC scripts/basic/fixdep
^[[31;01m*^[[0m HOSTCC scripts/kconfig/conf.o
^[[31;01m*^[[0m HOSTCC scripts/kconfig/zconf.tab.o
^[[31;01m*^[[0m HOSTLD scripts/kconfig/conf
^[[31;01m*^[[0mscripts/kconfig/conf --silentoldconfig Kconfig
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/bounds.s
^[[31;01m*^[[0m GEN include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m GEN include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1181:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1220:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall kcmp not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m SHIPPED scripts/genksyms/parse.tab.h
^[[31;01m*^[[0m SHIPPED scripts/genksyms/parse.tab.c
^[[31;01m*^[[0m HOSTCC scripts/genksyms/lex.lex.o
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0mscripts/genksyms/lex.lex.c_shipped: In function 'yylex1':
^[[31;01m*^[[0mscripts/genksyms/lex.lex.c_shipped:904:1: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'fwrite', declared with attribute warn_unused_result [-Wunused-result]
^[[31;01m*^[[0m<stdin>:1181:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1220:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall kcmp not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC arch/ia64/kernel/time.o
^[[31;01m*^[[0m CC kernel/exit.o
^[[31;01m*^[[0m CC arch/ia64/kernel/traps.o
^[[31;01m*^[[0m CC arch/ia64/kernel/unaligned.o
^[[31;01m*^[[0march/ia64/kernel/unaligned.c: In function 'ia64_handle_unaligned':
^[[31;01m*^[[0march/ia64/kernel/unaligned.c:1382:16: ^[[1m^[[Kwarning^[[m^[[K: 'u.l' may be used uninitialized in this function [-Wuninitialized]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/kthread.o
^[[31;01m*^[[0m CC kernel/wait.o
^[[31;01m*^[[0m CC kernel/sys_ni.o
^[[31;01m*^[[0m CC kernel/posix-cpu-timers.o
^[[31;01m*^[[0mmm/page_alloc.c: In function '__free_pages_ok.part.51':
^[[31;01m*^[[0mmm/page_alloc.c:589:31: ^[[1m^[[Kwarning^[[m^[[K: 'buddy' may be used uninitialized in this function [-Wuninitialized]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/utsname_sysctl.o
^[[31;01m*^[[0m CC kernel/elfcore.o
^[[31;01m*^[[0m CC kernel/irq_work.o
^[[31;01m*^[[0m BC kernel/timeconst.h
^[[31;01m*^[[0m/bin/sh: bc: command not found
^[[31;01m*^[[0mmake[1]: *** [kernel/timeconst.h] ^[[1m^[[KError ^[[m^[[K127
^[[31;01m*^[[0mmake: *** [kernel] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20130917 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20130917.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20130917.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20130917.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1419, in build_kernel
self._build_kernel(kname=kname)
File "modules/generic_stage_target.py", line 1463, in _build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 226, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1295, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1424, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130917/.catalyst_lock'
Full build log at /tmp/catalyst-auto.24666/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2013-09-11 21:42 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2013-09-11 21:42 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Installing (12 of 16) virtual/dev-manager-0 to /tmp/kerncache/gentoo/
>>> Emerging (13 of 16) sys-devel/libperl-5.10.1 for /tmp/kerncache/gentoo/
>>> Installing (13 of 16) sys-devel/libperl-5.10.1 to /tmp/kerncache/gentoo/
>>> Emerging (14 of 16) dev-lang/perl-5.12.4-r1 for /tmp/kerncache/gentoo/
>>> Installing (14 of 16) dev-lang/perl-5.12.4-r1 to /tmp/kerncache/gentoo/
>>> Emerging (15 of 16) app-admin/perl-cleaner-2.7 for /tmp/kerncache/gentoo/
>>> Installing (15 of 16) app-admin/perl-cleaner-2.7 to /tmp/kerncache/gentoo/
>>> Emerging (16 of 16) sys-kernel/gentoo-sources-3.10.7 for /tmp/kerncache/gentoo/
>>> Installing (16 of 16) sys-kernel/gentoo-sources-3.10.7 to /tmp/kerncache/gentoo/
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-apps/util-linux-2.22.2 merged to /tmp/kerncache/gentoo/:
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-fs/udev-204 merged to /tmp/kerncache/gentoo/:
* Unable to find kernel sources at /tmp/kerncache/gentoo/usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* The new predictable network interface names are used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use kernel commandline net.ifnames=0 to disable this feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-kernel/gentoo-sources-3.10.7 merged to /tmp/kerncache/gentoo/:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: http://www.gentoo.org/doc/en/kernel-upgrade.xml
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.4.45.1^[[0m
^[[32;01m*^[[0m Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20130910 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20130910.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20130910.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20130910.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m3.10.7-gentoo^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[33;01m*^[[0m ^[[0;01mWARNING^[[0m: No mounted /boot partition detected!
^[[33;01m*^[[0m Run mount /boot to mount it!
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 3.10.7-gentoo ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m Linux Kernel 3.10.7-gentoo^[[0m for ia64^[[0m...
^[[31;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[31;01m*^[[0m ^[[1m^[[KWARNING^[[m^[[K: No mounted /boot partition detected!
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m SHIPPED scripts/kconfig/zconf.lex.c
^[[31;01m*^[[0m SHIPPED scripts/kconfig/zconf.hash.c
^[[31;01m*^[[0m HOSTCC scripts/kconfig/zconf.tab.o
^[[31;01m*^[[0m HOSTLD scripts/kconfig/conf
^[[31;01m*^[[0mscripts/kconfig/conf --oldconfig Kconfig
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mAltera FPGA firmware download module (ALTERA_STAPL) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mJFS filesystem support (JFS_FS) [N/m/y/?] n
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSelf test for the backtrace code (BACKTRACE_SELF_TEST) [N/m/y/?] n
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mForce weak per-cpu definitions (DEBUG_FORCE_WEAK_PER_CPU) [N/y/?] n
^[[31;01m*^[[0mDebug access to per_cpu maps (DEBUG_PER_CPU_MAPS) [N/y/?] n
^[[31;01m*^[[0mLinux Kernel Dump Test Tool Module (LKDTM) [N/m/y/?] n
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m HOSTCC scripts/basic/fixdep
^[[31;01m*^[[0m HOSTCC scripts/kconfig/conf.o
^[[31;01m*^[[0m HOSTCC scripts/kconfig/zconf.tab.o
^[[31;01m*^[[0m HOSTLD scripts/kconfig/conf
^[[31;01m*^[[0mscripts/kconfig/conf --silentoldconfig Kconfig
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/bounds.s
^[[31;01m*^[[0m GEN include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m GEN include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1181:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1220:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall kcmp not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m SHIPPED scripts/genksyms/parse.tab.h
^[[31;01m*^[[0m SHIPPED scripts/genksyms/parse.tab.c
^[[31;01m*^[[0m HOSTCC scripts/genksyms/lex.lex.o
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0mscripts/genksyms/lex.lex.c_shipped: In function 'yylex1':
^[[31;01m*^[[0mscripts/genksyms/lex.lex.c_shipped:904:1: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'fwrite', declared with attribute warn_unused_result [-Wunused-result]
^[[31;01m*^[[0m<stdin>:1181:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1220:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall kcmp not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/sysctl.o
^[[31;01m*^[[0m CC arch/ia64/kernel/traps.o
^[[31;01m*^[[0m CC arch/ia64/kernel/unaligned.o
^[[31;01m*^[[0m CC kernel/sysctl_binary.o
^[[31;01m*^[[0march/ia64/kernel/unaligned.c: In function 'ia64_handle_unaligned':
^[[31;01m*^[[0march/ia64/kernel/unaligned.c:1382:16: ^[[1m^[[Kwarning^[[m^[[K: 'u.l' may be used uninitialized in this function [-Wuninitialized]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/nsproxy.o
^[[31;01m*^[[0m CC kernel/srcu.o
^[[31;01m*^[[0m CC kernel/semaphore.o
^[[31;01m*^[[0m CC kernel/notifier.o
^[[31;01m*^[[0mmm/page_alloc.c: In function '__free_pages_ok.part.51':
^[[31;01m*^[[0mmm/page_alloc.c:589:31: ^[[1m^[[Kwarning^[[m^[[K: 'buddy' may be used uninitialized in this function [-Wuninitialized]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/elfcore.o
^[[31;01m*^[[0m CC kernel/irq_work.o
^[[31;01m*^[[0m CC mm/dmapool.o
^[[31;01m*^[[0m BC kernel/timeconst.h
^[[31;01m*^[[0m/bin/sh: bc: command not found
^[[31;01m*^[[0mmake[1]: *** [kernel/timeconst.h] ^[[1m^[[KError ^[[m^[[K127
^[[31;01m*^[[0mmake: *** [kernel] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20130910 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20130910.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20130910.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20130910.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1419, in build_kernel
self._build_kernel(kname=kname)
File "modules/generic_stage_target.py", line 1463, in _build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 226, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1295, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1424, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130910/.catalyst_lock'
Full build log at /tmp/catalyst-auto.14492/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2013-09-04 21:34 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2013-09-04 21:34 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Installing (15 of 16) app-admin/perl-cleaner-2.7 to /tmp/kerncache/gentoo/
>>> Emerging (16 of 16) sys-kernel/gentoo-sources-3.10.7 for /tmp/kerncache/gentoo/
>>> Installing (16 of 16) sys-kernel/gentoo-sources-3.10.7 to /tmp/kerncache/gentoo/
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-apps/util-linux-2.22.2 merged to /tmp/kerncache/gentoo/:
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-fs/udev-204 merged to /tmp/kerncache/gentoo/:
* Unable to find kernel sources at /tmp/kerncache/gentoo/usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* The new predictable network interface names are used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use kernel commandline net.ifnames=0 to disable this feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-kernel/gentoo-sources-3.10.7 merged to /tmp/kerncache/gentoo/:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: http://www.gentoo.org/doc/en/kernel-upgrade.xml
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.4.45.1^[[0m
^[[32;01m*^[[0m Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20130903 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20130903.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20130903.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20130903.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m3.10.7-gentoo^[[0m for ^[[0;01mia64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[33;01m*^[[0m ^[[0;01mWARNING^[[0m: No mounted /boot partition detected!
^[[33;01m*^[[0m Run mount /boot to mount it!
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m >> Compiling 3.10.7-gentoo ...
^[[31;01m*^[[0m ERROR: Failed to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- Grepping log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m Linux Kernel 3.10.7-gentoo^[[0m for ia64^[[0m...
^[[31;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[31;01m*^[[0m ^[[1m^[[KWARNING^[[m^[[K: No mounted /boot partition detected!
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m SHIPPED scripts/kconfig/zconf.lex.c
^[[31;01m*^[[0m SHIPPED scripts/kconfig/zconf.hash.c
^[[31;01m*^[[0m HOSTCC scripts/kconfig/zconf.tab.o
^[[31;01m*^[[0m HOSTLD scripts/kconfig/conf
^[[31;01m*^[[0mscripts/kconfig/conf --oldconfig Kconfig
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mAltera FPGA firmware download module (ALTERA_STAPL) [N/m/y/?] n
^[[31;01m*^[[0m
^[[31;01m*^[[0m Serial ATA and Parallel ATA drivers
^[[31;01m*^[[0m
^[[31;01m*^[[0mSerial ATA and Parallel ATA drivers (ATA) [Y/n/m/?] y
^[[31;01m*^[[0m Verbose ATA ^[[1m^[[Kerror ^[[m^[[Kreporting (ATA_VERBOSE_ERROR) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mJFS filesystem support (JFS_FS) [N/m/y/?] n
^[[31;01m*^[[0mXFS filesystem support (XFS_FS) [Y/n/m/?] y
^[[31;01m*^[[0m XFS Quota support (XFS_QUOTA) [Y/n/?] y
^[[31;01m*^[[0m XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
^[[31;01m*^[[0m XFS Realtime subvolume support (XFS_RT) [N/y/?] n
^[[31;01m*^[[0m XFS Verbose ^[[1m^[[KWarning^[[m^[[Ks (XFS_WARN) [N/y/?] (NEW)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mDnotify support (DNOTIFY) [Y/n/?] y
^[[31;01m*^[[0mInotify support for userspace (INOTIFY_USER) [Y/n/?] y
^[[31;01m*^[[0mFilesystem wide access notification (FANOTIFY) [N/y/?] n
^[[31;01m*^[[0mQuota support (QUOTA) [Y/?] y
^[[31;01m*^[[0mReport quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
^[[31;01m*^[[0mPrint quota ^[[1m^[[Kwarning^[[m^[[Ks to console (OBSOLETE) (PRINT_QUOTA_^[[1m^[[KWARNING^[[m^[[K) [Y/n/?] y
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mSelf test for the backtrace code (BACKTRACE_SELF_TEST) [N/m/y/?] n
^[[31;01m*^[[0mForce extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
^[[31;01m*^[[0mForce weak per-cpu definitions (DEBUG_FORCE_WEAK_PER_CPU) [N/y/?] n
^[[31;01m*^[[0mDebug access to per_cpu maps (DEBUG_PER_CPU_MAPS) [N/y/?] n
^[[31;01m*^[[0mLinux Kernel Dump Test Tool Module (LKDTM) [N/m/y/?] n
^[[31;01m*^[[0mNotifier ^[[1m^[[Kerror ^[[m^[[Kinjection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m HOSTCC scripts/basic/fixdep
^[[31;01m*^[[0m HOSTCC scripts/kconfig/conf.o
^[[31;01m*^[[0m HOSTCC scripts/kconfig/zconf.tab.o
^[[31;01m*^[[0m HOSTLD scripts/kconfig/conf
^[[31;01m*^[[0mscripts/kconfig/conf --silentoldconfig Kconfig
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[1m^[[Kwarning^[[m^[[K: (IA64) selects PM which has unmet direct dependencies (PM_SLEEP || PM_RUNTIME)
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/bounds.s
^[[31;01m*^[[0m GEN include/generated/bounds.h
^[[31;01m*^[[0m CC arch/ia64/kernel/asm-offsets.s
^[[31;01m*^[[0m GEN include/generated/asm-offsets.h
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1181:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1220:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall kcmp not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0mmake[1]: `include/generated/nr-irqs.h' is up to date.
^[[31;01m*^[[0m CHK include/generated/uapi/linux/version.h
^[[31;01m*^[[0m CHK include/generated/utsrelease.h
^[[31;01m*^[[0m HOSTCC scripts/genksyms/genksyms.o
^[[31;01m*^[[0m CALL scripts/checksyscalls.sh
^[[31;01m*^[[0m<stdin>:1181:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall perf_event_open not implemented [-Wcpp]
^[[31;01m*^[[0m<stdin>:1220:2: ^[[1m^[[Kwarning^[[m^[[K: #^[[1m^[[Kwarning^[[m^[[K syscall kcmp not implemented [-Wcpp]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m SHIPPED scripts/genksyms/keywords.hash.c
^[[31;01m*^[[0m SHIPPED scripts/genksyms/parse.tab.h
^[[31;01m*^[[0m SHIPPED scripts/genksyms/parse.tab.c
^[[31;01m*^[[0m HOSTCC scripts/genksyms/lex.lex.o
^[[31;01m*^[[0mscripts/genksyms/lex.lex.c_shipped: In function 'yylex1':
^[[31;01m*^[[0mscripts/genksyms/lex.lex.c_shipped:904:1: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'fwrite', declared with attribute warn_unused_result [-Wunused-result]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC arch/ia64/kernel/time.o
^[[31;01m*^[[0m CC kernel/exit.o
^[[31;01m*^[[0m CC arch/ia64/kernel/traps.o
^[[31;01m*^[[0m CC arch/ia64/kernel/unaligned.o
^[[31;01m*^[[0march/ia64/kernel/unaligned.c: In function 'ia64_handle_unaligned':
^[[31;01m*^[[0march/ia64/kernel/unaligned.c:1382:16: ^[[1m^[[Kwarning^[[m^[[K: 'u.l' may be used uninitialized in this function [-Wuninitialized]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC kernel/kthread.o
^[[31;01m*^[[0m CC kernel/wait.o
^[[31;01m*^[[0m CC kernel/sys_ni.o
^[[31;01m*^[[0m CC kernel/posix-cpu-timers.o
^[[31;01m*^[[0mmm/page_alloc.c: In function '__free_pages_ok.part.51':
^[[31;01m*^[[0mmm/page_alloc.c:589:31: ^[[1m^[[Kwarning^[[m^[[K: 'buddy' may be used uninitialized in this function [-Wuninitialized]
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m CC mm/mempolicy.o
^[[31;01m*^[[0m CC kernel/elfcore.o
^[[31;01m*^[[0m CC kernel/irq_work.o
^[[31;01m*^[[0m BC kernel/timeconst.h
^[[31;01m*^[[0m/bin/sh: bc: command not found
^[[31;01m*^[[0mmake[1]: *** [kernel/timeconst.h] ^[[1m^[[KError ^[[m^[[K127
^[[31;01m*^[[0mmake: *** [kernel] ^[[1m^[[KError ^[[m^[[K2
^[[31;01m*^[[0m^[[36m^[[K--^[[m^[[K
^[[31;01m*^[[0m Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20130903 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20130903.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20130903.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20130903.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[31;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/ia64/config.sh ..
^[[31;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/ia64/modules_load ..
^[[31;01m*^[[0m
^[[31;01m*^[[0m ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[31;01m*^[[0m
^[[31;01m*^[[0m -- End log... --
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[31;01m*^[[0m errors that were reported above.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[31;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[31;01m*^[[0m as much information as you can in your bug report; attaching
^[[31;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[31;01m*^[[0m
^[[31;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[31;01m*^[[0m
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1419, in build_kernel
self._build_kernel(kname=kname)
File "modules/generic_stage_target.py", line 1463, in _build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 226, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1295, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1424, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130903/.catalyst_lock'
Full build log at /tmp/catalyst-auto.28343/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2013-06-19 10:50 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2013-06-19 10:50 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-kernel/gentoo-sources-3.7.10/temp/logging/unpack: No space left on device
* [[ $x -ne 0 && $x -ne ${PORTAGE_SIGPIPE_STATUS:-141} ]] && die "$@"
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-kernel/gentoo-sources-3.7.10/temp/logging/unpack: No space left on device
*
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-kernel/gentoo-sources-3.7.10/temp/logging/unpack: No space left on device
* If you need support, post the output of `emerge --info '=sys-kernel/gentoo-sources-3.7.10'`,
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-kernel/gentoo-sources-3.7.10/temp/logging/unpack: No space left on device
* the complete build log and the output of `emerge -pqv '=sys-kernel/gentoo-sources-3.7.10'`.
/usr/lib/portage/bin/isolated-functions.sh: line 217: /var/tmp/portage/sys-kernel/gentoo-sources-3.7.10/.die_hooks: No space left on device
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-kernel/gentoo-sources-3.7.10/temp/logging/unpack: No space left on device
* The complete build log is located at '/var/tmp/portage/sys-kernel/gentoo-sources-3.7.10/temp/build.log'.
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-kernel/gentoo-sources-3.7.10/temp/logging/unpack: No space left on device
* The ebuild environment file is located at '/var/tmp/portage/sys-kernel/gentoo-sources-3.7.10/temp/environment'.
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-kernel/gentoo-sources-3.7.10/temp/logging/unpack: No space left on device
* Working directory: '/var/tmp/portage/sys-kernel/gentoo-sources-3.7.10/work'
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-kernel/gentoo-sources-3.7.10/temp/logging/unpack: No space left on device
* S: '/var/tmp/portage/sys-kernel/gentoo-sources-3.7.10/work/linux-3.7.10-gentoo'
Traceback (most recent call last):
File "/usr/lib/portage/bin/ebuild-ipc.py", line 228, in <module>
sys.exit(ebuild_ipc_main(sys.argv[1:]))
File "/usr/lib/portage/bin/ebuild-ipc.py", line 225, in ebuild_ipc_main
return ebuild_ipc.communicate(args)
File "/usr/lib/portage/bin/ebuild-ipc.py", line 82, in communicate
lock_obj = portage.locks.lockfile(self.ipc_lock_file, unlinkfile=True)
File "/usr/lib/portage/pym/portage/locks.py", line 103, in lockfile
myfd = os.open(lockfilename, os.O_CREAT|os.O_RDWR, 0o660)
File "/usr/lib/portage/pym/portage/__init__.py", line 246, in __call__
rval = self._func(*wrapped_args, **wrapped_kwargs)
OSError: [Errno 28] No space left on device: '/var/tmp/portage/sys-kernel/gentoo-sources-3.7.10/.ipc_lock'
* The ebuild phase 'unpack' has exited unexpectedly. This type of behavior
* is known to be triggered by things such as failed variable assignments
* (bug #190128) or bad substitution errors (bug #200313). Normally, before
* exiting, bash should have displayed an error message above. If bash did
* not produce an error message above, it's possible that the ebuild has
* called `exit` when it should have called `die` instead. This behavior
* may also be triggered by a corrupt bash binary or a hardware problem
* such as memory or cpu malfunction. If the problem is not reproducible or
* it appears to occur randomly, then it is likely to be triggered by a
* hardware problem. If you suspect a hardware problem then you should try
* some basic hardware diagnostics such as memtest. Please do not report
* this as a bug unless it is consistently reproducible and you are sure
* that your bash binary and hardware are functioning properly.
/usr/lib/portage/bin/misc-functions.sh: line 1246: /var/tmp/portage/sys-kernel/gentoo-sources-3.7.10/.die_hooks: No space left on device
Traceback (most recent call last):
File "/usr/lib/portage/bin/ebuild-ipc.py", line 228, in <module>
sys.exit(ebuild_ipc_main(sys.argv[1:]))
File "/usr/lib/portage/bin/ebuild-ipc.py", line 225, in ebuild_ipc_main
return ebuild_ipc.communicate(args)
File "/usr/lib/portage/bin/ebuild-ipc.py", line 82, in communicate
lock_obj = portage.locks.lockfile(self.ipc_lock_file, unlinkfile=True)
File "/usr/lib/portage/pym/portage/locks.py", line 103, in lockfile
myfd = os.open(lockfilename, os.O_CREAT|os.O_RDWR, 0o660)
File "/usr/lib/portage/pym/portage/__init__.py", line 246, in __call__
rval = self._func(*wrapped_args, **wrapped_kwargs)
OSError: [Errno 28] No space left on device: '/var/tmp/portage/sys-kernel/gentoo-sources-3.7.10/.ipc_lock'
* The ebuild phase 'die_hooks' has exited unexpectedly. This type of
* behavior is known to be triggered by things such as failed variable
* assignments (bug #190128) or bad substitution errors (bug #200313).
* Normally, before exiting, bash should have displayed an error message
* above. If bash did not produce an error message above, it's possible
* that the ebuild has called `exit` when it should have called `die`
* instead. This behavior may also be triggered by a corrupt bash binary or
* a hardware problem such as memory or cpu malfunction. If the problem is
* not reproducible or it appears to occur randomly, then it is likely to
* be triggered by a hardware problem. If you suspect a hardware problem
* then you should try some basic hardware diagnostics such as memtest.
* Please do not report this as a bug unless it is consistently
* reproducible and you are sure that your bash binary and hardware are
* functioning properly.
* Messages for package sys-kernel/gentoo-sources-3.7.10 merged to /tmp/kerncache/gentoo/:
* The ebuild phase 'unpack' has exited unexpectedly. This type of behavior
* is known to be triggered by things such as failed variable assignments
* (bug #190128) or bad substitution errors (bug #200313). Normally, before
* exiting, bash should have displayed an error message above. If bash did
* not produce an error message above, it's possible that the ebuild has
* called `exit` when it should have called `die` instead. This behavior
* may also be triggered by a corrupt bash binary or a hardware problem
* such as memory or cpu malfunction. If the problem is not reproducible or
* it appears to occur randomly, then it is likely to be triggered by a
* hardware problem. If you suspect a hardware problem then you should try
* some basic hardware diagnostics such as memtest. Please do not report
* this as a bug unless it is consistently reproducible and you are sure
* that your bash binary and hardware are functioning properly.
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618/tmp/kerncache: filesystem umounted, but mount(8) failed: No space left on device
!!! catalyst: Runscript kernel build failed
!!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618//tmp/kerncache failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618/tmp/kerncache: not mounted
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618/usr/portage/packages: filesystem umounted, but mount(8) failed: No space left on device
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618//tmp/kerncache
!!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618//usr/portage/packages failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618/usr/portage/packages: not mounted
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618/dev/pts: filesystem umounted, but mount(8) failed: No space left on device
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618//usr/portage/packages
!!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618//dev/pts failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618/dev/pts: not mounted
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618/usr/portage/distfiles: filesystem umounted, but mount(8) failed: No space left on device
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618//dev/pts
!!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618//usr/portage/distfiles failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618/usr/portage/distfiles: not mounted
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618/usr/portage: filesystem umounted, but mount(8) failed: No space left on device
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618//usr/portage/distfiles
!!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618//usr/portage failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618/usr/portage: not mounted
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618/dev: filesystem umounted, but mount(8) failed: No space left on device
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618//usr/portage
!!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618//dev failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618/dev: not mounted
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618/proc: filesystem umounted, but mount(8) failed: No space left on device
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618//dev
!!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618//proc failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618/proc: not mounted
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618/tmp/kerncache: not mounted
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618//proc
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1492, in build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Couldn't umount one or more bind-mounts; aborting for safety.
/proc is still mounted; performing auto-bind-umount... !!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618//tmp/kerncache failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618/tmp/kerncache: not mounted
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618/usr/portage: not mounted
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618//tmp/kerncache
!!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618//usr/portage failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618/usr/portage: not mounted
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618/dev: not mounted
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618//usr/portage
!!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618//dev failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618/dev: not mounted
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618/proc: not mounted
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618//dev
!!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618//proc failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618/proc: not mounted
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618//proc
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1290, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1516, in build_kernel
self.unbind()
File "modules/generic_stage_target.py", line 971, in unbind
"Couldn't umount one or more bind-mounts; aborting for safety."
CatalystError
None
!!! catalyst: Couldn't umount one or more bind-mounts; aborting for safety.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 623, in mount_safety_check
self.unbind()
File "modules/generic_stage_target.py", line 971, in unbind
"Couldn't umount one or more bind-mounts; aborting for safety."
CatalystError
None
!!! catalyst: Unable to auto-unbind /proc
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 214, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1292, in run
self.mount_safety_check()
File "modules/generic_stage_target.py", line 629, in mount_safety_check
raise CatalystError, "Unable to auto-unbind "+x
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20130618/.catalyst_lock'
Full build log at /tmp/catalyst-auto.27619/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2012-07-25 6:33 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2012-07-25 6:33 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
LD loginutils/built-in.o
CC loginutils/chpasswd.o
loginutils/chpasswd.c: In function 'chpasswd_main':
loginutils/chpasswd.c:40:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
CC libbb/create_icmp_socket.o
AR loginutils/lib.a
LD mailutils/built-in.o
CC mailutils/mail.o
libbb/create_icmp_socket.c: In function 'create_icmp_socket':
libbb/create_icmp_socket.c:28:4: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/create_icmp_socket.c:29:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
CC libbb/default_error_retval.o
mailutils/mail.c: In function 'encode_base64':
mailutils/mail.c:159:9: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'fwrite', declared with attribute warn_unused_result
CC libbb/device_open.o
CC mailutils/makemime.o
CC libbb/dump.o
mailutils/makemime.c: In function 'makemime_main':
mailutils/makemime.c:175:10: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'freopen', declared with attribute warn_unused_result
CC mailutils/popmaildir.o
libbb/dump.c: In function 'display':
libbb/dump.c:613:8: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/dump.c:663:5: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
AR mailutils/lib.a
LD miscutils/built-in.o
CC miscutils/beep.o
CC libbb/fflush_stdout_and_exit.o
libbb/fflush_stdout_and_exit.c: In function 'fflush_stdout_and_exit':
libbb/fflush_stdout_and_exit.c:19:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
CC miscutils/makedevs.o
CC libbb/get_cpu_count.o
CC miscutils/man.o
CC libbb/get_last_path_component.o
miscutils/man.c: In function 'run_pipe':
miscutils/man.c:122:8: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'system', declared with attribute warn_unused_result
CC libbb/get_line_from_file.o
CC miscutils/microcom.o
CC libbb/get_shell_name.o
miscutils/microcom.c: In function 'microcom_main':
miscutils/microcom.c:152:9: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'write', declared with attribute warn_unused_result
^[[36m^[[K--^[[m^[[K
CC networking/brctl.o
CC libbb/isdirectory.o
CC libbb/kernel_version.o
CC networking/ftpd.o
networking/ftpd.c: In function 'ftpd_main':
networking/ftpd.c:1183:9: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'chroot', declared with attribute warn_unused_result
CC libbb/last_char_is.o
networking/ftpd.c: In function 'popen_ls':
networking/ftpd.c:672:6: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'dup', declared with attribute warn_unused_result
^[[36m^[[K--^[[m^[[K
CC libbb/make_directory.o
CC networking/interface.o
CC libbb/makedev.o
CC libbb/match_fstype.o
networking/interface.c: In function 'if_readlist_proc':
networking/interface.c:572:2: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'fgets_unlocked', declared with attribute warn_unused_result
networking/interface.c:573:2: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'fgets_unlocked', declared with attribute warn_unused_result
CC libbb/messages.o
CC libbb/mode_string.o
CC libbb/mtab.o
CC networking/nbd-client.o
networking/nbd-client.c: In function 'nbdclient_main':
networking/nbd-client.c:133:10: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'daemon', declared with attribute warn_unused_result
CC libbb/parse_config.o
CC networking/ntpd.o
networking/ntpd.c: In function 'ntp_init':
networking/ntpd.c:1906:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
CC networking/tftp.o
CC networking/tunctl.o
CC networking/wget.o
CC libbb/progress.o
networking/wget.c: In function 'open_socket':
networking/wget.c:202:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
LD networking/libiproute/built-in.o
AR networking/libiproute/lib.a
LD networking/udhcp/built-in.o
CC networking/udhcp/arpping.o
networking/udhcp/arpping.c: In function 'arpping':
networking/udhcp/arpping.c:53:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
CC libbb/u_signal_names.o
CC printutils/lpd.o
CC libbb/udp_io.o
CC printutils/lpr.o
printutils/lpr.c: In function 'lpqr_main':
printutils/lpr.c:252:8: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'write', declared with attribute warn_unused_result
^[[36m^[[K--^[[m^[[K
LD procps/built-in.o
CC procps/free.o
CC libbb/update_passwd.o
CC procps/iostat.o
libbb/update_passwd.c: In function 'update_passwd':
libbb/update_passwd.c:138:9: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'fchown', declared with attribute warn_unused_result
^[[36m^[[K--^[[m^[[K
CC libbb/vfork_daemon_rexec.o
CC procps/mpstat.o
CC libbb/warn_ignoring_args.o
CC libbb/wfopen.o
libbb/wfopen.c: In function 'xfdopen_helper':
libbb/wfopen.c:46:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
CC libbb/xfuncs.o
CC procps/ps.o
CC procps/pstree.o
CC libbb/xfuncs_printf.o
libbb/xfuncs_printf.c: In function 'malloc_or_warn':
libbb/xfuncs_printf.c:40:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'xmalloc':
libbb/xfuncs_printf.c:49:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'xrealloc':
libbb/xfuncs_printf.c:60:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'xstrdup':
libbb/xfuncs_printf.c:84:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'xasprintf':
libbb/xfuncs_printf.c:302:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'xsetenv':
libbb/xfuncs_printf.c:309:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'generate_uuid':
libbb/xfuncs_printf.c:592:7: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'read', declared with attribute warn_unused_result
^[[36m^[[K--^[[m^[[K
AR selinux/lib.a
LD shell/built-in.o
CC shell/ash.o
CC libbb/xrealloc_vector.o
shell/ash.c: In function 'sprint_status':
shell/ash.c:3929:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
CC util-linux/hexdump.o
CC util-linux/losetup.o
CC util-linux/lspci.o
CC util-linux/lsusb.o
CC util-linux/mdStart.o
util-linux/mdStart.c:37:1: ^[[1m^[[Kwarning^[[m^[[K: no previous prototype for 'mdstart_main'
util-linux/mdStart.c: In function 'mdstart_main':
util-linux/mdStart.c:43:3: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'bb_show_usage'
util-linux/mdStart.c:48:3: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'sscanf'
util-linux/mdStart.c:48:6: ^[[1m^[[Kwarning^[[m^[[K: incompatible implicit declaration of built-in function 'sscanf'
util-linux/mdStart.c:55:4: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'close'
util-linux/mdStart.c:58:4: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'printf'
util-linux/mdStart.c:58:4: ^[[1m^[[Kwarning^[[m^[[K: incompatible implicit declaration of built-in function 'printf'
CC util-linux/mdev.o
util-linux/mdev.c: In function 'make_device':
util-linux/mdev.c:394:13: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'symlink', declared with attribute warn_unused_result
util-linux/mdev.c:397:11: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'chown', declared with attribute warn_unused_result
util-linux/mdev.c:401:14: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'symlink', declared with attribute warn_unused_result
CC util-linux/mkfs_ext2.o
util-linux/mkfs_ext2.c:51:27: fatal ^[[1m^[[Kerror:^[[m^[[K linux/ext2_fs.h: No such file or directory
compilation terminated.
make[1]: *** [util-linux/mkfs_ext2.o] ^[[1m^[[KError ^[[m^[[K1
make: *** [util-linux] ^[[1m^[[KError ^[[m^[[K2
^[[36m^[[K--^[[m^[[K
CC shell/shell_common.o
AR shell/lib.a
* Gentoo Linux Genkernel; Version 3.4.24_p1^[[0m
* Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20120724 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20120724.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20120724.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20120724.tar.bz2 --kernel-config=/var/tmp/gentoo.config
* ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "all" target...
^[[32;01m*^[[0m -- End log... --
^[[32;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[32;01m*^[[0m errors that were reported above.
^[[32;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[32;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[32;01m*^[[0m as much information as you can in your bug report; attaching
^[[32;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[32;01m*^[[0m
^[[32;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[32;01m*^[[0m
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1456, in build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 206, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1254, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1482, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120724/.catalyst_lock'
Full build log at /tmp/catalyst-auto.4094/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2012-06-27 4:03 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2012-06-27 4:03 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.8.1
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2011 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage2
Building natively for ia64
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20120626/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20120626/
Location of the package cache is /var/tmp/catalyst/packages/default/livecd-stage2-ia64-20120626/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/livecd-stage2-ia64-20120626/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20120626/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20120626/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120626/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /var/tmp/catalyst/tmp/default/livecd-stage1-ia64-20120626/
to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120626/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
--- Running action sequence: build_kernel
copying pre-kmerge.sh to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120626/tmp/
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120626/tmp/
Running pre-kmerge.sh in chroot /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120626/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot genkernel
>>> Verifying ebuild manifests
>>> Starting parallel fetch
>>> Emerging (1 of 2) app-arch/cpio-2.11
>>> Installing (1 of 2) app-arch/cpio-2.11
>>> Emerging (2 of 2) sys-kernel/genkernel-3.4.20
>>> Installing (2 of 2) sys-kernel/genkernel-3.4.20
* Messages for package sys-kernel/genkernel-3.4.20:
* Copying files to /var/cache/genkernel/src...
* Documentation is available in the genkernel manual page
* as well as the following URL:
* http://www.gentoo.org/doc/en/genkernel.xml
* This package is known to not work with reiser4. If you are running
* reiser4 and have a problem, do not file a bug. We know it does not
* work and we don't plan on fixing it since reiser4 is the one that is
* broken in this regard. Try using a sane filesystem like ext3 or
* even reiser3.
* The LUKS support has changed from versions prior to 3.4.4. Now,
* you use crypt_root=/dev/blah instead of real_root=luks:/dev/blah.
removing /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120626/tmp/chroot-functions.sh from the chroot
copying kmerge.sh to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120626/tmp/
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120626/tmp/
Running kmerge.sh in chroot /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120626/
>>> Regenerating /etc/ld.so.cache...
Genkernel version 3.4.20 found ... continuing
emerge --quiet --nodeps --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-3.2.1-r2 for /tmp/kerncache/gentoo/
>>> Installing (1 of 1) sys-kernel/gentoo-sources-3.2.1-r2 to /tmp/kerncache/gentoo/
>>> Failed to install sys-kernel/gentoo-sources-3.2.1-r2 to /tmp/kerncache/gentoo/, Log file:
>>> '/var/tmp/portage/sys-kernel/gentoo-sources-3.2.1-r2/temp/build.log'
* Package: sys-kernel/gentoo-sources-3.2.1-r2
* Repository: gentoo
* Maintainer: kernel@gentoo.org
* USE: build elibc_glibc ia64 kernel_linux userland_GNU
* FEATURES: sandbox
>>> Preparing to unpack ...
* Applying 1000_linux-3.2.1.patch (-p0+) ...
[ ok ]
* Applying 2100_proc-mem-handling-fix.patch (-p0+) ...
[ ok ]
* Applying 2600_Input-ALPS-synaptics-touchpad.patch (-p0+) ...
[ ok ]
* Applying 4200_fbcondecor-0.9.6.patch (-p0+) ...
[ ok ]
>>> Copying sources ...
Traceback (most recent call last):
File "/usr/lib/portage/pym/portage/dbapi/_MergeProcess.py", line 216, in _spawn
prev_mtimes=self.prev_mtimes, counter=counter)
File "/usr/lib/portage/pym/portage/dbapi/vartree.py", line 4526, in merge
counter=counter)
File "/usr/lib/portage/pym/portage/dbapi/vartree.py", line 3825, in treewalk
rval = self._merge_contents(srcroot, destroot, cfgfiledict)
File "/usr/lib/portage/pym/portage/dbapi/vartree.py", line 4099, in _merge_contents
self.settings["EPREFIX"].lstrip(os.sep), cfgfiledict, mymtime):
File "/usr/lib/portage/pym/portage/dbapi/vartree.py", line 4396, in mergeme
join(offset, x), cfgfiledict, thismtime):
File "/usr/lib/portage/pym/portage/dbapi/vartree.py", line 4396, in mergeme
join(offset, x), cfgfiledict, thismtime):
File "/usr/lib/portage/pym/portage/dbapi/vartree.py", line 4396, in mergeme
join(offset, x), cfgfiledict, thismtime):
File "/usr/lib/portage/pym/portage/dbapi/vartree.py", line 4396, in mergeme
join(offset, x), cfgfiledict, thismtime):
File "/usr/lib/portage/pym/portage/dbapi/vartree.py", line 4396, in mergeme
join(offset, x), cfgfiledict, thismtime):
File "/usr/lib/portage/pym/portage/dbapi/vartree.py", line 4396, in mergeme
join(offset, x), cfgfiledict, thismtime):
File "/usr/lib/portage/pym/portage/dbapi/vartree.py", line 4400, in mergeme
mymd5 = perform_md5(mysrc, calc_prelink=calc_prelink)
File "/usr/lib/portage/pym/portage/checksum.py", line 184, in _perform_md5_merge
encoding=_encodings['merge'], errors='strict'), **kwargs)
File "/usr/lib/portage/pym/portage/checksum.py", line 180, in perform_md5
return perform_checksum(x, "MD5", calc_prelink)[0]
File "/usr/lib/portage/pym/portage/checksum.py", line 306, in perform_checksum
myhash, mysize = hashfunc_map[hashname](myfilename)
File "/usr/lib/portage/pym/portage/checksum.py", line 53, in __call__
data = f.read(blocksize)
IOError: [Errno 5] Input/output error
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1456, in build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 206, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1254, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1482, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120626/.catalyst_lock'
Full build log at /tmp/catalyst-auto.31767/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2012-06-13 4:33 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2012-06-13 4:33 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
applets/applet_tables.c: In function 'main':
applets/applet_tables.c:138:9: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'fgets', declared with attribute warn_unused_result
GEN include/usage_compressed.h
GEN include/applet_tables.h
HOSTCC applets/usage_pod
CC applets/applets.o
applets/usage_pod.c: In function 'main':
applets/usage_pod.c:74:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
CC archival/bbunzip.o
LD archival/libarchive/built-in.o
CC archival/libarchive/data_align.o
CC archival/libarchive/data_extract_all.o
archival/libarchive/data_extract_all.c: In function 'data_extract_all':
archival/libarchive/data_extract_all.c:176:9: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'chown', declared with attribute warn_unused_result
^[[36m^[[K--^[[m^[[K
CC archival/libarchive/find_list_entry.o
CC console-tools/clear.o
CC archival/libarchive/get_header_tar.o
CC console-tools/dumpkmap.o
archival/libarchive/get_header_tar.c: In function 'get_header_tar':
archival/libarchive/get_header_tar.c:202:3: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
console-tools/dumpkmap.c: In function 'dumpkmap_main':
console-tools/dumpkmap.c:42:7: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'write', declared with attribute warn_unused_result
console-tools/dumpkmap.c:51:7: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'write', declared with attribute warn_unused_result
console-tools/dumpkmap.c:64:11: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'write', declared with attribute warn_unused_result
archival/libarchive/get_header_tar.c:253:34: ^[[1m^[[Kwarning^[[m^[[K: array subscript is above array bounds
^[[36m^[[K--^[[m^[[K
CC console-tools/kbd_mode.o
CC archival/libarchive/get_header_tar_bz2.o
CC archival/libarchive/get_header_tar_gz.o
CC console-tools/loadfont.o
console-tools/loadfont.c: In function 'setfont_main':
console-tools/loadfont.c:384:9: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'chdir', declared with attribute warn_unused_result
console-tools/loadfont.c:402:10: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'chdir', declared with attribute warn_unused_result
^[[36m^[[K--^[[m^[[K
LD e2fsprogs/built-in.o
AR e2fsprogs/lib.a
LD editors/built-in.o
CC editors/sed.o
editors/sed.c: In function 'sed_main':
editors/sed.c:1381:10: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'fchown', declared with attribute warn_unused_result
^[[36m^[[K--^[[m^[[K
CC findutils/xargs.o
AR findutils/lib.a
LD init/built-in.o
CC init/bootchartd.o
init/bootchartd.c: In function 'finalize':
init/bootchartd.c:310:8: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'system', declared with attribute warn_unused_result
^[[36m^[[K--^[[m^[[K
CC libbb/create_icmp6_socket.o
CC coreutils/tty.o
CC libbb/create_icmp_socket.o
CC coreutils/uname.o
libbb/create_icmp_socket.c: In function 'create_icmp_socket':
libbb/create_icmp_socket.c:28:4: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/create_icmp_socket.c:29:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
CC coreutils/uniq.o
CC libbb/device_open.o
CC coreutils/uudecode.o
CC libbb/dump.o
libbb/dump.c: In function 'display':
libbb/dump.c:616:8: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/dump.c:666:5: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
AR libpwdgrp/lib.a
LD loginutils/built-in.o
CC loginutils/chpasswd.o
CC libbb/execable.o
loginutils/chpasswd.c: In function 'chpasswd_main':
loginutils/chpasswd.c:29:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
AR loginutils/lib.a
LD mailutils/built-in.o
CC libbb/fclose_nonstdin.o
CC mailutils/mail.o
mailutils/mail.c: In function 'encode_base64':
mailutils/mail.c:156:9: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'fwrite', declared with attribute warn_unused_result
CC libbb/fflush_stdout_and_exit.o
libbb/fflush_stdout_and_exit.c: In function 'fflush_stdout_and_exit':
libbb/fflush_stdout_and_exit.c:19:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
CC mailutils/mime.o
CC libbb/fgets_str.o
mailutils/mime.c: In function 'makemime_main':
mailutils/mime.c:133:10: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'freopen', declared with attribute warn_unused_result
^[[36m^[[K--^[[m^[[K
CC libbb/getpty.o
CC miscutils/makedevs.o
CC libbb/hash_md5_sha.o
CC miscutils/man.o
miscutils/man.c: In function 'run_pipe':
miscutils/man.c:115:8: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'system', declared with attribute warn_unused_result
CC miscutils/microcom.o
CC libbb/herror_msg.o
miscutils/microcom.c: In function 'microcom_main':
miscutils/microcom.c:141:9: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'write', declared with attribute warn_unused_result
^[[36m^[[K--^[[m^[[K
AR modutils/lib.a
LD networking/built-in.o
CC networking/brctl.o
CC networking/ftpd.o
networking/ftpd.c: In function 'ftpd_main':
networking/ftpd.c:1167:9: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'chroot', declared with attribute warn_unused_result
networking/ftpd.c: In function 'popen_ls':
networking/ftpd.c:656:6: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'dup', declared with attribute warn_unused_result
^[[36m^[[K--^[[m^[[K
CC libbb/mtab.o
CC libbb/obscure.o
CC networking/interface.o
CC libbb/parse_config.o
networking/interface.c: In function 'if_readlist_proc':
networking/interface.c:573:7: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'fgets', declared with attribute warn_unused_result
networking/interface.c:574:7: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'fgets', declared with attribute warn_unused_result
CC libbb/parse_mode.o
CC libbb/perror_msg.o
CC networking/nbd-client.o
CC libbb/perror_nomsg.o
networking/nbd-client.c: In function 'nbdclient_main':
networking/nbd-client.c:133:10: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'daemon', declared with attribute warn_unused_result
CC libbb/perror_nomsg_and_die.o
CC libbb/pidfile.o
CC networking/ntpd.o
CC libbb/platform.o
networking/ntpd.c: In function 'ntp_init':
networking/ntpd.c:1888:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
CC libbb/printable.o
CC libbb/printable_string.o
CC libbb/process_escape_sequence.o
CC networking/ping.o
CC libbb/procps.o
libbb/procps.c:157:13: ^[[1m^[[Kwarning^[[m^[[K: 'fast_strtol_10' defined but not used
^[[36m^[[K--^[[m^[[K
AR networking/libiproute/lib.a
CC libbb/read_key.o
LD networking/udhcp/built-in.o
CC networking/udhcp/arpping.o
networking/udhcp/arpping.c: In function 'arpping':
networking/udhcp/arpping.c:53:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
CC networking/udhcp/common.o
CC libbb/recursive_action.o
CC networking/udhcp/dhcpc.o
CC libbb/remove_file.o
Assembler messages:
Fatal ^[[1m^[[Kerror:^[[m^[[K can't create libbb/remove_file.o: No space left on device
make[1]: *** [libbb/remove_file.o] ^[[1m^[[KError ^[[m^[[K1
make: *** [libbb] ^[[1m^[[KError ^[[m^[[K2
make: *** Waiting for unfinished jobs....
CC networking/udhcp/dhcpd.o
networking/udhcp/dhcpd.c:645:1: fatal ^[[1m^[[Kerror:^[[m^[[K opening dependency file networking/udhcp/.dhcpd.o.d: No space left on device
compilation terminated.
make[1]: *** [networking/udhcp/dhcpd.o] ^[[1m^[[KError ^[[m^[[K1
make[1]: *** Waiting for unfinished jobs....
Assembler messages:
Fatal ^[[1m^[[Kerror:^[[m^[[K can't create networking/udhcp/dhcpc.o: No space left on device
make[1]: *** [networking/udhcp/dhcpc.o] ^[[1m^[[KError ^[[m^[[K1
make: *** [networking/udhcp] ^[[1m^[[KError ^[[m^[[K2
* Gentoo Linux Genkernel; Version 3.4.20^[[0m
* Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20120612 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20120612.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20120612.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20120612.tar.bz2 --kernel-config=/var/tmp/gentoo.config
* ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "all" target...
^[[32;01m*^[[0m -- End log... --
^[[32;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[32;01m*^[[0m errors that were reported above.
^[[32;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[32;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[32;01m*^[[0m as much information as you can in your bug report; attaching
^[[32;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[32;01m*^[[0m
^[[32;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[32;01m*^[[0m
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1458, in build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 206, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1256, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1484, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120612/.catalyst_lock'
Full build log at /tmp/catalyst-auto.31186/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2012-06-06 4:50 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2012-06-06 4:50 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
networking/interface.c: In function 'if_readlist_proc':
networking/interface.c:573:7: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'fgets', declared with attribute warn_unused_result
networking/interface.c:574:7: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'fgets', declared with attribute warn_unused_result
CC libbb/process_escape_sequence.o
CC libbb/procps.o
libbb/procps.c:157:13: ^[[1m^[[Kwarning^[[m^[[K: 'fast_strtol_10' defined but not used
CC networking/nbd-client.o
networking/nbd-client.c: In function 'nbdclient_main':
networking/nbd-client.c:133:10: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'daemon', declared with attribute warn_unused_result
CC libbb/progress.o
CC networking/ntpd.o
networking/ntpd.c: In function 'ntp_init':
networking/ntpd.c:1888:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
AR networking/libiproute/lib.a
CC libbb/safe_poll.o
LD networking/udhcp/built-in.o
CC networking/udhcp/arpping.o
networking/udhcp/arpping.c: In function 'arpping':
networking/udhcp/arpping.c:53:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
CC libbb/strrstr.o
CC libbb/time.o
CC libbb/trim.o
CC networking/udhcp/dhcprelay.o
networking/udhcp/dhcprelay.c: In function 'xid_add':
networking/udhcp/dhcprelay.c:44:15: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
networking/udhcp/dhcprelay.c:45:2: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
networking/udhcp/dhcprelay.c: In function 'xid_expire':
networking/udhcp/dhcprelay.c:52:26: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
networking/udhcp/dhcprelay.c:53:27: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
networking/udhcp/dhcprelay.c: In function 'xid_find':
networking/udhcp/dhcprelay.c:70:26: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
networking/udhcp/dhcprelay.c: In function 'xid_del':
networking/udhcp/dhcprelay.c:82:26: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
networking/udhcp/dhcprelay.c:83:27: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
^[[36m^[[K--^[[m^[[K
CC libbb/unicode.o
CC networking/udhcp/dumpleases.o
CC networking/udhcp/files.o
CC libbb/update_passwd.o
libbb/update_passwd.c: In function 'update_passwd':
libbb/update_passwd.c:138:9: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'fchown', declared with attribute warn_unused_result
^[[36m^[[K--^[[m^[[K
CC networking/udhcp/socket.o
CC libbb/warn_ignoring_args.o
CC libbb/wfopen.o
CC networking/udhcp/static_leases.o
libbb/wfopen.c: In function 'xfdopen_helper':
libbb/wfopen.c:46:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
CC printutils/lpd.o
CC libbb/write.o
CC printutils/lpr.o
CC libbb/xatonum.o
printutils/lpr.c: In function 'lpqr_main':
printutils/lpr.c:233:8: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'write', declared with attribute warn_unused_result
AR printutils/lib.a
LD procps/built-in.o
CC procps/free.o
CC libbb/xconnect.o
procps/free.c: In function 'scale':
procps/free.c:29:34: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
procps/free.c: In function 'free_main':
procps/free.c:65:2: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
^[[36m^[[K--^[[m^[[K
CC libbb/xfunc_die.o
CC libbb/xfuncs.o
CC procps/kill.o
CC libbb/xfuncs_printf.o
libbb/xfuncs_printf.c: In function 'malloc_or_warn':
libbb/xfuncs_printf.c:40:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'xmalloc':
libbb/xfuncs_printf.c:49:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'xrealloc':
libbb/xfuncs_printf.c:60:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'xstrdup':
libbb/xfuncs_printf.c:84:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'xasprintf':
libbb/xfuncs_printf.c:302:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'xsetenv':
libbb/xfuncs_printf.c:309:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'generate_uuid':
libbb/xfuncs_printf.c:592:7: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'read', declared with attribute warn_unused_result
^[[36m^[[K--^[[m^[[K
LD selinux/built-in.o
AR selinux/lib.a
LD shell/built-in.o
CC shell/ash.o
shell/ash.c: In function 'sprint_status':
shell/ash.c:3883:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
CC util-linux/hexdump.o
CC util-linux/losetup.o
CC util-linux/lspci.o
CC util-linux/lsusb.o
CC util-linux/mdStart.o
util-linux/mdStart.c:30:1: ^[[1m^[[Kwarning^[[m^[[K: no previous prototype for 'mdstart_main'
util-linux/mdStart.c: In function 'mdstart_main':
util-linux/mdStart.c:36:3: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'bb_show_usage'
util-linux/mdStart.c:41:3: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'sscanf'
util-linux/mdStart.c:41:6: ^[[1m^[[Kwarning^[[m^[[K: incompatible implicit declaration of built-in function 'sscanf'
util-linux/mdStart.c:48:4: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'close'
util-linux/mdStart.c:51:4: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'printf'
util-linux/mdStart.c:51:4: ^[[1m^[[Kwarning^[[m^[[K: incompatible implicit declaration of built-in function 'printf'
CC util-linux/mdev.o
util-linux/mdev.c: In function 'make_device':
util-linux/mdev.c:359:13: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'symlink', declared with attribute warn_unused_result
util-linux/mdev.c:362:11: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'chown', declared with attribute warn_unused_result
util-linux/mdev.c:366:14: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'symlink', declared with attribute warn_unused_result
CC util-linux/mkfs_ext2.o
CC util-linux/mkfs_vfat.o
CC util-linux/more.o
CC util-linux/mount.o
util-linux/mount.c: In function 'mount_it_now':
util-linux/mount.c:487:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
util-linux/mount.c: In function 'singlemount':
util-linux/mount.c:1692:6: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
util-linux/mount.c: In function 'mount_main':
util-linux/mount.c:1876:5: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
util-linux/mount.c:1893:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
util-linux/mount.c:1956:5: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
util-linux/mount.c:2036:5: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
CC util-linux/volume_id/volume_id.o
CC util-linux/volume_id/xfs.o
AR util-linux/volume_id/lib.a
LINK busybox_unstripped
Trying libraries: crypt m
^[[1m^[[KFailed^[[m^[[K: -Wl,--start-group -lcrypt -lm -Wl,--end-group
Output of:
gcc -Wall -Wshadow -Wwrite-strings -Wundef -Wstrict-prototypes -Wunused -Wunused-parameter -Wunused-function -Wunused-value -Wmissing-prototypes -Wmissing-declarations -Wdeclaration-after-statement -Wold-style-definition -fno-builtin-strlen -finline-limit=0 -fomit-frame-pointer -ffunction-sections -fdata-sections -fno-guess-branch-probability -funsigned-char -static-libgcc -falign-functions=1 -falign-jumps=1 -falign-labels=1 -falign-loops=1 -Os -static -o busybox_unstripped -Wl,--sort-common -Wl,--sort-section,alignment -Wl,--start-group applets/built-in.o archival/lib.a archival/libarchive/lib.a console-tools/lib.a coreutils/lib.a coreutils/libcoreutils/lib.a debianutils/lib.a e2fsprogs/lib.a editors/lib.a findutils/lib.a init/lib.a libbb/lib.a libpwdgrp/lib.a loginutils/lib.a mailutils/lib.a miscutils/lib.a modutils/lib.a networking/lib.a networking/libiproute/lib.a networking/udhcp/lib.a printutils/lib.a procps/lib.a runit/lib.a selinux/lib.a shell/lib.a sysklogd/lib.a uti
l-linux/lib.a util-linux/volume_id/lib.a archival/built-in.o archival/libarchive/built-in.o console-tools/built-in.o coreutils/built-in.o coreutils/libcoreutils/built-in.o debianutils/built-in.o e2fsprogs/built-in.o editors/built-in.o findutils/built-in.o init/built-in.o libbb/built-in.o libpwdgrp/built-in.o loginutils/built-in.o mailutils/built-in.o miscutils/built-in.o modutils/built-in.o networking/built-in.o networking/libiproute/built-in.o networking/udhcp/built-in.o printutils/built-in.o procps/built-in.o runit/built-in.o selinux/built-in.o shell/built-in.o sysklogd/built-in.o util-linux/built-in.o util-linux/volume_id/built-in.o -Wl,--end-group -Wl,--start-group -lcrypt -lm -Wl,--end-group
==========
coreutils/lib.a(id.o): In function `get_groups':
id.c:(.text.get_groups+0x32): ^[[1m^[[Kwarning^[[m^[[K: Using 'getgrouplist' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
libbb/lib.a(bb_pwd.o): In function `xgetgrgid':
bb_pwd.c:(.text.xgetgrgid+0x22): ^[[1m^[[Kwarning^[[m^[[K: Using 'getgrgid' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
archival/libarchive/lib.a(data_extract_all.o): In function `data_extract_all':
data_extract_all.c:(.text.data_extract_all+0x912): ^[[1m^[[Kwarning^[[m^[[K: Using 'getgrnam' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
shell/lib.a(ash.o): In function `argstr':
ash.c:(.text.argstr+0x2a2): ^[[1m^[[Kwarning^[[m^[[K: Using 'getpwnam' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
libbb/lib.a(bb_pwd.o): In function `xgetpwuid':
bb_pwd.c:(.text.xgetpwuid+0x22): ^[[1m^[[Kwarning^[[m^[[K: Using 'getpwuid' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
libbb/lib.a(xconnect.o): In function `str2sockaddr':
xconnect.c:(.text.str2sockaddr+0x252): ^[[1m^[[Kwarning^[[m^[[K: Using 'getaddrinfo' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
libbb/lib.a(inet_common.o): In function `INET_rresolve':
inet_common.c:(.text.INET_rresolve+0x222): ^[[1m^[[Kwarning^[[m^[[K: Using 'gethostbyaddr' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
util-linux/lib.a(mount.o): In function `nfsmount':
mount.c:(.text.nfsmount+0x1c2): ^[[1m^[[Kwarning^[[m^[[K: Using 'gethostbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
libbb/lib.a(xconnect.o): In function `bb_lookup_port':
xconnect.c:(.text.bb_lookup_port+0x92): ^[[1m^[[Kwarning^[[m^[[K: Using 'getservbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
^[[36m^[[K--^[[m^[[K
mount.c:(.text.nfsmount+0x14d2): undefined reference to `clnt_sperror'
mount.c:(.text.nfsmount+0x1552): undefined reference to `clnt_sperror'
mount.c:(.text.nfsmount+0x1952): undefined reference to `bindresvport'
mount.c:(.text.nfsmount+0x19f2): undefined reference to `pmap_getport'
collect2: ld returned 1 exit status
make: *** [busybox_unstripped] ^[[1m^[[KError ^[[m^[[K1
* Gentoo Linux Genkernel; Version 3.4.20^[[0m
* Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20120605 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20120605.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20120605.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20120605.tar.bz2 --kernel-config=/var/tmp/gentoo.config
* ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "all" target...
^[[32;01m*^[[0m -- End log... --
^[[32;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[32;01m*^[[0m errors that were reported above.
^[[32;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[32;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[32;01m*^[[0m as much information as you can in your bug report; attaching
^[[32;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[32;01m*^[[0m
^[[32;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[32;01m*^[[0m
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1458, in build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 206, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1256, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1484, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120605/.catalyst_lock'
Full build log at /tmp/catalyst-auto.22397/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2012-05-30 4:52 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2012-05-30 4:52 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
CC libbb/perror_nomsg_and_die.o
CC libbb/pidfile.o
CC networking/nbd-client.o
CC libbb/platform.o
networking/nbd-client.c: In function 'nbdclient_main':
networking/nbd-client.c:133:10: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'daemon', declared with attribute warn_unused_result
CC libbb/print_flags.o
CC networking/ntpd.o
CC libbb/printable.o
networking/ntpd.c: In function 'ntp_init':
networking/ntpd.c:1888:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
CC libbb/printable_string.o
CC libbb/process_escape_sequence.o
CC libbb/procps.o
libbb/procps.c:157:13: ^[[1m^[[Kwarning^[[m^[[K: 'fast_strtol_10' defined but not used
^[[36m^[[K--^[[m^[[K
LD networking/libiproute/built-in.o
AR networking/libiproute/lib.a
LD networking/udhcp/built-in.o
CC networking/udhcp/arpping.o
networking/udhcp/arpping.c: In function 'arpping':
networking/udhcp/arpping.c:53:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
CC libbb/signals.o
CC libbb/simplify_path.o
CC networking/udhcp/dhcprelay.o
CC libbb/single_argv.o
networking/udhcp/dhcprelay.c: In function 'xid_add':
networking/udhcp/dhcprelay.c:44:15: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
networking/udhcp/dhcprelay.c:45:2: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
networking/udhcp/dhcprelay.c: In function 'xid_expire':
networking/udhcp/dhcprelay.c:52:26: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
networking/udhcp/dhcprelay.c:53:27: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
networking/udhcp/dhcprelay.c: In function 'xid_find':
networking/udhcp/dhcprelay.c:70:26: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
networking/udhcp/dhcprelay.c: In function 'xid_del':
networking/udhcp/dhcprelay.c:82:26: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
networking/udhcp/dhcprelay.c:83:27: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
^[[36m^[[K--^[[m^[[K
CC libbb/unicode.o
CC networking/udhcp/signalpipe.o
CC networking/udhcp/socket.o
CC libbb/update_passwd.o
libbb/update_passwd.c: In function 'update_passwd':
libbb/update_passwd.c:138:9: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'fchown', declared with attribute warn_unused_result
^[[36m^[[K--^[[m^[[K
CC printutils/lpd.o
CC libbb/vdprintf.o
CC libbb/verror_msg.o
CC printutils/lpr.o
printutils/lpr.c: In function 'lpqr_main':
printutils/lpr.c:233:8: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'write', declared with attribute warn_unused_result
^[[36m^[[K--^[[m^[[K
AR printutils/lib.a
LD procps/built-in.o
CC procps/free.o
CC libbb/warn_ignoring_args.o
procps/free.c: In function 'scale':
procps/free.c:29:34: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
procps/free.c: In function 'free_main':
procps/free.c:65:2: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
CC procps/iostat.o
CC libbb/wfopen.o
libbb/wfopen.c: In function 'xfdopen_helper':
libbb/wfopen.c:46:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
CC libbb/xfuncs.o
CC procps/pgrep.o
CC libbb/xfuncs_printf.o
CC procps/pmap.o
libbb/xfuncs_printf.c: In function 'malloc_or_warn':
libbb/xfuncs_printf.c:40:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'xmalloc':
libbb/xfuncs_printf.c:49:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'xrealloc':
libbb/xfuncs_printf.c:60:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'xstrdup':
libbb/xfuncs_printf.c:84:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'xasprintf':
libbb/xfuncs_printf.c:302:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'xsetenv':
libbb/xfuncs_printf.c:309:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'generate_uuid':
libbb/xfuncs_printf.c:592:7: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'read', declared with attribute warn_unused_result
^[[36m^[[K--^[[m^[[K
CC shell/ash.o
AR sysklogd/lib.a
LD util-linux/built-in.o
CC util-linux/acpid.o
shell/ash.c: In function 'sprint_status':
shell/ash.c:3883:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
CC util-linux/hexdump.o
CC util-linux/losetup.o
CC util-linux/lspci.o
CC util-linux/lsusb.o
CC util-linux/mdStart.o
util-linux/mdStart.c:30:1: ^[[1m^[[Kwarning^[[m^[[K: no previous prototype for 'mdstart_main'
util-linux/mdStart.c: In function 'mdstart_main':
util-linux/mdStart.c:36:3: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'bb_show_usage'
util-linux/mdStart.c:41:3: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'sscanf'
util-linux/mdStart.c:41:6: ^[[1m^[[Kwarning^[[m^[[K: incompatible implicit declaration of built-in function 'sscanf'
util-linux/mdStart.c:48:4: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'close'
util-linux/mdStart.c:51:4: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'printf'
util-linux/mdStart.c:51:4: ^[[1m^[[Kwarning^[[m^[[K: incompatible implicit declaration of built-in function 'printf'
CC util-linux/mdev.o
util-linux/mdev.c: In function 'make_device':
util-linux/mdev.c:359:13: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'symlink', declared with attribute warn_unused_result
util-linux/mdev.c:362:11: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'chown', declared with attribute warn_unused_result
util-linux/mdev.c:366:14: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'symlink', declared with attribute warn_unused_result
CC util-linux/mkfs_ext2.o
CC util-linux/mkfs_vfat.o
CC util-linux/more.o
CC util-linux/mount.o
util-linux/mount.c: In function 'mount_it_now':
util-linux/mount.c:487:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
util-linux/mount.c: In function 'singlemount':
util-linux/mount.c:1692:6: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
util-linux/mount.c: In function 'mount_main':
util-linux/mount.c:1876:5: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
util-linux/mount.c:1893:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
util-linux/mount.c:1956:5: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
util-linux/mount.c:2036:5: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
CC util-linux/volume_id/volume_id.o
CC util-linux/volume_id/xfs.o
AR util-linux/volume_id/lib.a
LINK busybox_unstripped
Trying libraries: crypt m
^[[1m^[[KFailed^[[m^[[K: -Wl,--start-group -lcrypt -lm -Wl,--end-group
Output of:
gcc -Wall -Wshadow -Wwrite-strings -Wundef -Wstrict-prototypes -Wunused -Wunused-parameter -Wunused-function -Wunused-value -Wmissing-prototypes -Wmissing-declarations -Wdeclaration-after-statement -Wold-style-definition -fno-builtin-strlen -finline-limit=0 -fomit-frame-pointer -ffunction-sections -fdata-sections -fno-guess-branch-probability -funsigned-char -static-libgcc -falign-functions=1 -falign-jumps=1 -falign-labels=1 -falign-loops=1 -Os -static -o busybox_unstripped -Wl,--sort-common -Wl,--sort-section,alignment -Wl,--start-group applets/built-in.o archival/lib.a archival/libarchive/lib.a console-tools/lib.a coreutils/lib.a coreutils/libcoreutils/lib.a debianutils/lib.a e2fsprogs/lib.a editors/lib.a findutils/lib.a init/lib.a libbb/lib.a libpwdgrp/lib.a loginutils/lib.a mailutils/lib.a miscutils/lib.a modutils/lib.a networking/lib.a networking/libiproute/lib.a networking/udhcp/lib.a printutils/lib.a procps/lib.a runit/lib.a selinux/lib.a shell/lib.a sysklogd/lib.a uti
l-linux/lib.a util-linux/volume_id/lib.a archival/built-in.o archival/libarchive/built-in.o console-tools/built-in.o coreutils/built-in.o coreutils/libcoreutils/built-in.o debianutils/built-in.o e2fsprogs/built-in.o editors/built-in.o findutils/built-in.o init/built-in.o libbb/built-in.o libpwdgrp/built-in.o loginutils/built-in.o mailutils/built-in.o miscutils/built-in.o modutils/built-in.o networking/built-in.o networking/libiproute/built-in.o networking/udhcp/built-in.o printutils/built-in.o procps/built-in.o runit/built-in.o selinux/built-in.o shell/built-in.o sysklogd/built-in.o util-linux/built-in.o util-linux/volume_id/built-in.o -Wl,--end-group -Wl,--start-group -lcrypt -lm -Wl,--end-group
==========
coreutils/lib.a(id.o): In function `get_groups':
id.c:(.text.get_groups+0x32): ^[[1m^[[Kwarning^[[m^[[K: Using 'getgrouplist' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
libbb/lib.a(bb_pwd.o): In function `xgetgrgid':
bb_pwd.c:(.text.xgetgrgid+0x22): ^[[1m^[[Kwarning^[[m^[[K: Using 'getgrgid' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
archival/libarchive/lib.a(data_extract_all.o): In function `data_extract_all':
data_extract_all.c:(.text.data_extract_all+0x912): ^[[1m^[[Kwarning^[[m^[[K: Using 'getgrnam' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
shell/lib.a(ash.o): In function `argstr':
ash.c:(.text.argstr+0x2a2): ^[[1m^[[Kwarning^[[m^[[K: Using 'getpwnam' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
libbb/lib.a(bb_pwd.o): In function `xgetpwuid':
bb_pwd.c:(.text.xgetpwuid+0x22): ^[[1m^[[Kwarning^[[m^[[K: Using 'getpwuid' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
libbb/lib.a(xconnect.o): In function `str2sockaddr':
xconnect.c:(.text.str2sockaddr+0x252): ^[[1m^[[Kwarning^[[m^[[K: Using 'getaddrinfo' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
libbb/lib.a(inet_common.o): In function `INET_rresolve':
inet_common.c:(.text.INET_rresolve+0x222): ^[[1m^[[Kwarning^[[m^[[K: Using 'gethostbyaddr' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
util-linux/lib.a(mount.o): In function `nfsmount':
mount.c:(.text.nfsmount+0x1c2): ^[[1m^[[Kwarning^[[m^[[K: Using 'gethostbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
libbb/lib.a(xconnect.o): In function `bb_lookup_port':
xconnect.c:(.text.bb_lookup_port+0x92): ^[[1m^[[Kwarning^[[m^[[K: Using 'getservbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
^[[36m^[[K--^[[m^[[K
mount.c:(.text.nfsmount+0x14d2): undefined reference to `clnt_sperror'
mount.c:(.text.nfsmount+0x1552): undefined reference to `clnt_sperror'
mount.c:(.text.nfsmount+0x1952): undefined reference to `bindresvport'
mount.c:(.text.nfsmount+0x19f2): undefined reference to `pmap_getport'
collect2: ld returned 1 exit status
make: *** [busybox_unstripped] ^[[1m^[[KError ^[[m^[[K1
* Gentoo Linux Genkernel; Version 3.4.20^[[0m
* Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20120529 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20120529.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20120529.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20120529.tar.bz2 --kernel-config=/var/tmp/gentoo.config
* ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "all" target...
^[[32;01m*^[[0m -- End log... --
^[[32;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[32;01m*^[[0m errors that were reported above.
^[[32;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[32;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[32;01m*^[[0m as much information as you can in your bug report; attaching
^[[32;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[32;01m*^[[0m
^[[32;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[32;01m*^[[0m
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1458, in build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 206, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1256, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1484, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120529/.catalyst_lock'
Full build log at /tmp/catalyst-auto.789/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2012-05-23 4:50 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2012-05-23 4:50 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
^[[36m^[[K--^[[m^[[K
CC libbb/perror_nomsg_and_die.o
CC libbb/pidfile.o
CC libbb/platform.o
CC networking/nbd-client.o
networking/nbd-client.c: In function 'nbdclient_main':
networking/nbd-client.c:133:10: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'daemon', declared with attribute warn_unused_result
CC libbb/print_flags.o
CC networking/ntpd.o
CC libbb/printable.o
networking/ntpd.c: In function 'ntp_init':
networking/ntpd.c:1888:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
CC libbb/printable_string.o
CC libbb/process_escape_sequence.o
CC libbb/procps.o
libbb/procps.c:157:13: ^[[1m^[[Kwarning^[[m^[[K: 'fast_strtol_10' defined but not used
^[[36m^[[K--^[[m^[[K
AR networking/libiproute/lib.a
LD networking/udhcp/built-in.o
CC networking/udhcp/arpping.o
CC libbb/recursive_action.o
networking/udhcp/arpping.c: In function 'arpping':
networking/udhcp/arpping.c:53:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
CC libbb/simplify_path.o
CC libbb/single_argv.o
CC networking/udhcp/dhcprelay.o
CC libbb/skip_whitespace.o
networking/udhcp/dhcprelay.c: In function 'xid_add':
networking/udhcp/dhcprelay.c:44:15: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
networking/udhcp/dhcprelay.c:45:2: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
networking/udhcp/dhcprelay.c: In function 'xid_expire':
networking/udhcp/dhcprelay.c:52:26: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
networking/udhcp/dhcprelay.c:53:27: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
networking/udhcp/dhcprelay.c: In function 'xid_find':
networking/udhcp/dhcprelay.c:70:26: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
networking/udhcp/dhcprelay.c: In function 'xid_del':
networking/udhcp/dhcprelay.c:82:26: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
networking/udhcp/dhcprelay.c:83:27: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
^[[36m^[[K--^[[m^[[K
CC libbb/unicode.o
CC networking/udhcp/signalpipe.o
CC libbb/update_passwd.o
CC networking/udhcp/socket.o
libbb/update_passwd.c: In function 'update_passwd':
libbb/update_passwd.c:138:9: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'fchown', declared with attribute warn_unused_result
^[[36m^[[K--^[[m^[[K
CC printutils/lpd.o
CC libbb/verror_msg.o
CC printutils/lpr.o
CC libbb/vfork_daemon_rexec.o
printutils/lpr.c: In function 'lpqr_main':
printutils/lpr.c:233:8: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'write', declared with attribute warn_unused_result
AR printutils/lib.a
LD procps/built-in.o
CC procps/free.o
CC libbb/warn_ignoring_args.o
procps/free.c: In function 'scale':
procps/free.c:29:34: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
procps/free.c: In function 'free_main':
procps/free.c:65:2: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
CC libbb/wfopen.o
CC procps/iostat.o
libbb/wfopen.c: In function 'xfdopen_helper':
libbb/wfopen.c:46:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
CC libbb/xfuncs.o
CC procps/pgrep.o
CC libbb/xfuncs_printf.o
CC procps/pmap.o
libbb/xfuncs_printf.c: In function 'malloc_or_warn':
libbb/xfuncs_printf.c:40:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'xmalloc':
libbb/xfuncs_printf.c:49:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'xrealloc':
libbb/xfuncs_printf.c:60:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'xstrdup':
libbb/xfuncs_printf.c:84:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'xasprintf':
libbb/xfuncs_printf.c:302:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'xsetenv':
libbb/xfuncs_printf.c:309:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'generate_uuid':
libbb/xfuncs_printf.c:592:7: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'read', declared with attribute warn_unused_result
^[[36m^[[K--^[[m^[[K
CC shell/ash.o
AR sysklogd/lib.a
LD util-linux/built-in.o
CC util-linux/acpid.o
shell/ash.c: In function 'sprint_status':
shell/ash.c:3883:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
CC util-linux/hexdump.o
CC util-linux/losetup.o
CC util-linux/lspci.o
CC util-linux/lsusb.o
CC util-linux/mdStart.o
util-linux/mdStart.c:30:1: ^[[1m^[[Kwarning^[[m^[[K: no previous prototype for 'mdstart_main'
util-linux/mdStart.c: In function 'mdstart_main':
util-linux/mdStart.c:36:3: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'bb_show_usage'
util-linux/mdStart.c:41:3: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'sscanf'
util-linux/mdStart.c:41:6: ^[[1m^[[Kwarning^[[m^[[K: incompatible implicit declaration of built-in function 'sscanf'
util-linux/mdStart.c:48:4: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'close'
util-linux/mdStart.c:51:4: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'printf'
util-linux/mdStart.c:51:4: ^[[1m^[[Kwarning^[[m^[[K: incompatible implicit declaration of built-in function 'printf'
CC util-linux/mdev.o
util-linux/mdev.c: In function 'make_device':
util-linux/mdev.c:359:13: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'symlink', declared with attribute warn_unused_result
util-linux/mdev.c:362:11: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'chown', declared with attribute warn_unused_result
util-linux/mdev.c:366:14: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'symlink', declared with attribute warn_unused_result
CC util-linux/mkfs_ext2.o
CC util-linux/mkfs_vfat.o
CC util-linux/more.o
CC util-linux/mount.o
util-linux/mount.c: In function 'mount_it_now':
util-linux/mount.c:487:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
util-linux/mount.c: In function 'singlemount':
util-linux/mount.c:1692:6: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
util-linux/mount.c: In function 'mount_main':
util-linux/mount.c:1876:5: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
util-linux/mount.c:1893:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
util-linux/mount.c:1956:5: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
util-linux/mount.c:2036:5: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
CC util-linux/volume_id/volume_id.o
CC util-linux/volume_id/xfs.o
AR util-linux/volume_id/lib.a
LINK busybox_unstripped
Trying libraries: crypt m
^[[1m^[[KFailed^[[m^[[K: -Wl,--start-group -lcrypt -lm -Wl,--end-group
Output of:
gcc -Wall -Wshadow -Wwrite-strings -Wundef -Wstrict-prototypes -Wunused -Wunused-parameter -Wunused-function -Wunused-value -Wmissing-prototypes -Wmissing-declarations -Wdeclaration-after-statement -Wold-style-definition -fno-builtin-strlen -finline-limit=0 -fomit-frame-pointer -ffunction-sections -fdata-sections -fno-guess-branch-probability -funsigned-char -static-libgcc -falign-functions=1 -falign-jumps=1 -falign-labels=1 -falign-loops=1 -Os -static -o busybox_unstripped -Wl,--sort-common -Wl,--sort-section,alignment -Wl,--start-group applets/built-in.o archival/lib.a archival/libarchive/lib.a console-tools/lib.a coreutils/lib.a coreutils/libcoreutils/lib.a debianutils/lib.a e2fsprogs/lib.a editors/lib.a findutils/lib.a init/lib.a libbb/lib.a libpwdgrp/lib.a loginutils/lib.a mailutils/lib.a miscutils/lib.a modutils/lib.a networking/lib.a networking/libiproute/lib.a networking/udhcp/lib.a printutils/lib.a procps/lib.a runit/lib.a selinux/lib.a shell/lib.a sysklogd/lib.a uti
l-linux/lib.a util-linux/volume_id/lib.a archival/built-in.o archival/libarchive/built-in.o console-tools/built-in.o coreutils/built-in.o coreutils/libcoreutils/built-in.o debianutils/built-in.o e2fsprogs/built-in.o editors/built-in.o findutils/built-in.o init/built-in.o libbb/built-in.o libpwdgrp/built-in.o loginutils/built-in.o mailutils/built-in.o miscutils/built-in.o modutils/built-in.o networking/built-in.o networking/libiproute/built-in.o networking/udhcp/built-in.o printutils/built-in.o procps/built-in.o runit/built-in.o selinux/built-in.o shell/built-in.o sysklogd/built-in.o util-linux/built-in.o util-linux/volume_id/built-in.o -Wl,--end-group -Wl,--start-group -lcrypt -lm -Wl,--end-group
==========
coreutils/lib.a(id.o): In function `get_groups':
id.c:(.text.get_groups+0x32): ^[[1m^[[Kwarning^[[m^[[K: Using 'getgrouplist' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
libbb/lib.a(bb_pwd.o): In function `xgetgrgid':
bb_pwd.c:(.text.xgetgrgid+0x22): ^[[1m^[[Kwarning^[[m^[[K: Using 'getgrgid' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
archival/libarchive/lib.a(data_extract_all.o): In function `data_extract_all':
data_extract_all.c:(.text.data_extract_all+0x912): ^[[1m^[[Kwarning^[[m^[[K: Using 'getgrnam' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
shell/lib.a(ash.o): In function `argstr':
ash.c:(.text.argstr+0x2a2): ^[[1m^[[Kwarning^[[m^[[K: Using 'getpwnam' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
libbb/lib.a(bb_pwd.o): In function `xgetpwuid':
bb_pwd.c:(.text.xgetpwuid+0x22): ^[[1m^[[Kwarning^[[m^[[K: Using 'getpwuid' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
libbb/lib.a(xconnect.o): In function `str2sockaddr':
xconnect.c:(.text.str2sockaddr+0x252): ^[[1m^[[Kwarning^[[m^[[K: Using 'getaddrinfo' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
libbb/lib.a(inet_common.o): In function `INET_rresolve':
inet_common.c:(.text.INET_rresolve+0x222): ^[[1m^[[Kwarning^[[m^[[K: Using 'gethostbyaddr' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
util-linux/lib.a(mount.o): In function `nfsmount':
mount.c:(.text.nfsmount+0x1c2): ^[[1m^[[Kwarning^[[m^[[K: Using 'gethostbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
libbb/lib.a(xconnect.o): In function `bb_lookup_port':
xconnect.c:(.text.bb_lookup_port+0x92): ^[[1m^[[Kwarning^[[m^[[K: Using 'getservbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
^[[36m^[[K--^[[m^[[K
mount.c:(.text.nfsmount+0x14d2): undefined reference to `clnt_sperror'
mount.c:(.text.nfsmount+0x1552): undefined reference to `clnt_sperror'
mount.c:(.text.nfsmount+0x1952): undefined reference to `bindresvport'
mount.c:(.text.nfsmount+0x19f2): undefined reference to `pmap_getport'
collect2: ld returned 1 exit status
make: *** [busybox_unstripped] ^[[1m^[[KError ^[[m^[[K1
* Gentoo Linux Genkernel; Version 3.4.20^[[0m
* Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20120522 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20120522.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20120522.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20120522.tar.bz2 --kernel-config=/var/tmp/gentoo.config
* ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "all" target...
^[[32;01m*^[[0m -- End log... --
^[[32;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[32;01m*^[[0m errors that were reported above.
^[[32;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[32;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[32;01m*^[[0m as much information as you can in your bug report; attaching
^[[32;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[32;01m*^[[0m
^[[32;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[32;01m*^[[0m
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1458, in build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 206, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1256, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1484, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120522/.catalyst_lock'
Full build log at /tmp/catalyst-auto.19921/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2012-05-16 4:59 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2012-05-16 4:59 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
CC libbb/perror_nomsg_and_die.o
networking/nbd-client.c: In function 'nbdclient_main':
networking/nbd-client.c:133:10: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'daemon', declared with attribute warn_unused_result
CC libbb/pidfile.o
CC networking/ntpd.o
CC libbb/platform.o
networking/ntpd.c: In function 'ntp_init':
networking/ntpd.c:1888:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
CC libbb/printable.o
CC libbb/printable_string.o
CC libbb/process_escape_sequence.o
CC libbb/procps.o
CC networking/ping.o
libbb/procps.c:157:13: ^[[1m^[[Kwarning^[[m^[[K: 'fast_strtol_10' defined but not used
^[[36m^[[K--^[[m^[[K
LD networking/libiproute/built-in.o
AR networking/libiproute/lib.a
LD networking/udhcp/built-in.o
CC networking/udhcp/arpping.o
networking/udhcp/arpping.c: In function 'arpping':
networking/udhcp/arpping.c:53:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
CC libbb/safe_write.o
CC libbb/setup_environment.o
CC libbb/signals.o
CC networking/udhcp/dhcprelay.o
networking/udhcp/dhcprelay.c: In function 'xid_add':
networking/udhcp/dhcprelay.c:44:15: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
networking/udhcp/dhcprelay.c:45:2: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
networking/udhcp/dhcprelay.c: In function 'xid_expire':
networking/udhcp/dhcprelay.c:52:26: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
networking/udhcp/dhcprelay.c:53:27: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
networking/udhcp/dhcprelay.c: In function 'xid_find':
networking/udhcp/dhcprelay.c:70:26: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
networking/udhcp/dhcprelay.c: In function 'xid_del':
networking/udhcp/dhcprelay.c:82:26: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
networking/udhcp/dhcprelay.c:83:27: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
^[[36m^[[K--^[[m^[[K
AR networking/udhcp/lib.a
LD printutils/built-in.o
CC printutils/lpd.o
CC libbb/update_passwd.o
libbb/update_passwd.c: In function 'update_passwd':
libbb/update_passwd.c:138:9: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'fchown', declared with attribute warn_unused_result
CC printutils/lpr.o
CC libbb/uuencode.o
printutils/lpr.c: In function 'lpqr_main':
printutils/lpr.c:233:8: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'write', declared with attribute warn_unused_result
^[[36m^[[K--^[[m^[[K
AR printutils/lib.a
LD procps/built-in.o
CC procps/free.o
CC libbb/verror_msg.o
procps/free.c: In function 'scale':
procps/free.c:29:34: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
procps/free.c: In function 'free_main':
procps/free.c:65:2: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
^[[36m^[[K--^[[m^[[K
CC libbb/vfork_daemon_rexec.o
CC libbb/warn_ignoring_args.o
CC libbb/wfopen.o
CC procps/kill.o
libbb/wfopen.c: In function 'xfdopen_helper':
libbb/wfopen.c:46:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
CC procps/pmap.o
CC libbb/xfuncs.o
CC procps/powertop.o
CC libbb/xfuncs_printf.o
libbb/xfuncs_printf.c: In function 'malloc_or_warn':
libbb/xfuncs_printf.c:40:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'xmalloc':
libbb/xfuncs_printf.c:49:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'xrealloc':
libbb/xfuncs_printf.c:60:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'xstrdup':
libbb/xfuncs_printf.c:84:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'xasprintf':
libbb/xfuncs_printf.c:302:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'xsetenv':
libbb/xfuncs_printf.c:309:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs_printf.c: In function 'generate_uuid':
libbb/xfuncs_printf.c:592:7: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'read', declared with attribute warn_unused_result
^[[36m^[[K--^[[m^[[K
AR selinux/lib.a
LD shell/built-in.o
CC shell/ash.o
CC libbb/xregcomp.o
shell/ash.c: In function 'sprint_status':
shell/ash.c:3883:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
CC util-linux/hexdump.o
CC util-linux/losetup.o
CC util-linux/lspci.o
CC util-linux/lsusb.o
CC util-linux/mdStart.o
util-linux/mdStart.c:30:1: ^[[1m^[[Kwarning^[[m^[[K: no previous prototype for 'mdstart_main'
util-linux/mdStart.c: In function 'mdstart_main':
util-linux/mdStart.c:36:3: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'bb_show_usage'
util-linux/mdStart.c:41:3: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'sscanf'
util-linux/mdStart.c:41:6: ^[[1m^[[Kwarning^[[m^[[K: incompatible implicit declaration of built-in function 'sscanf'
util-linux/mdStart.c:48:4: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'close'
util-linux/mdStart.c:51:4: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'printf'
util-linux/mdStart.c:51:4: ^[[1m^[[Kwarning^[[m^[[K: incompatible implicit declaration of built-in function 'printf'
CC util-linux/mdev.o
util-linux/mdev.c: In function 'make_device':
util-linux/mdev.c:359:13: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'symlink', declared with attribute warn_unused_result
util-linux/mdev.c:362:11: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'chown', declared with attribute warn_unused_result
util-linux/mdev.c:366:14: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'symlink', declared with attribute warn_unused_result
CC util-linux/mkfs_ext2.o
CC util-linux/mkfs_vfat.o
CC util-linux/more.o
CC util-linux/mount.o
util-linux/mount.c: In function 'mount_it_now':
util-linux/mount.c:487:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
util-linux/mount.c: In function 'singlemount':
util-linux/mount.c:1692:6: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
util-linux/mount.c: In function 'mount_main':
util-linux/mount.c:1876:5: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
util-linux/mount.c:1893:3: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
util-linux/mount.c:1956:5: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
util-linux/mount.c:2036:5: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
CC util-linux/volume_id/volume_id.o
CC util-linux/volume_id/xfs.o
AR util-linux/volume_id/lib.a
LINK busybox_unstripped
Trying libraries: crypt m
^[[1m^[[KFailed^[[m^[[K: -Wl,--start-group -lcrypt -lm -Wl,--end-group
Output of:
gcc -Wall -Wshadow -Wwrite-strings -Wundef -Wstrict-prototypes -Wunused -Wunused-parameter -Wunused-function -Wunused-value -Wmissing-prototypes -Wmissing-declarations -Wdeclaration-after-statement -Wold-style-definition -fno-builtin-strlen -finline-limit=0 -fomit-frame-pointer -ffunction-sections -fdata-sections -fno-guess-branch-probability -funsigned-char -static-libgcc -falign-functions=1 -falign-jumps=1 -falign-labels=1 -falign-loops=1 -Os -static -o busybox_unstripped -Wl,--sort-common -Wl,--sort-section,alignment -Wl,--start-group applets/built-in.o archival/lib.a archival/libarchive/lib.a console-tools/lib.a coreutils/lib.a coreutils/libcoreutils/lib.a debianutils/lib.a e2fsprogs/lib.a editors/lib.a findutils/lib.a init/lib.a libbb/lib.a libpwdgrp/lib.a loginutils/lib.a mailutils/lib.a miscutils/lib.a modutils/lib.a networking/lib.a networking/libiproute/lib.a networking/udhcp/lib.a printutils/lib.a procps/lib.a runit/lib.a selinux/lib.a shell/lib.a sysklogd/lib.a uti
l-linux/lib.a util-linux/volume_id/lib.a archival/built-in.o archival/libarchive/built-in.o console-tools/built-in.o coreutils/built-in.o coreutils/libcoreutils/built-in.o debianutils/built-in.o e2fsprogs/built-in.o editors/built-in.o findutils/built-in.o init/built-in.o libbb/built-in.o libpwdgrp/built-in.o loginutils/built-in.o mailutils/built-in.o miscutils/built-in.o modutils/built-in.o networking/built-in.o networking/libiproute/built-in.o networking/udhcp/built-in.o printutils/built-in.o procps/built-in.o runit/built-in.o selinux/built-in.o shell/built-in.o sysklogd/built-in.o util-linux/built-in.o util-linux/volume_id/built-in.o -Wl,--end-group -Wl,--start-group -lcrypt -lm -Wl,--end-group
==========
coreutils/lib.a(id.o): In function `get_groups':
id.c:(.text.get_groups+0x32): ^[[1m^[[Kwarning^[[m^[[K: Using 'getgrouplist' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
libbb/lib.a(bb_pwd.o): In function `xgetgrgid':
bb_pwd.c:(.text.xgetgrgid+0x22): ^[[1m^[[Kwarning^[[m^[[K: Using 'getgrgid' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
archival/libarchive/lib.a(data_extract_all.o): In function `data_extract_all':
data_extract_all.c:(.text.data_extract_all+0x912): ^[[1m^[[Kwarning^[[m^[[K: Using 'getgrnam' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
shell/lib.a(ash.o): In function `argstr':
ash.c:(.text.argstr+0x2a2): ^[[1m^[[Kwarning^[[m^[[K: Using 'getpwnam' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
libbb/lib.a(bb_pwd.o): In function `xgetpwuid':
bb_pwd.c:(.text.xgetpwuid+0x22): ^[[1m^[[Kwarning^[[m^[[K: Using 'getpwuid' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
libbb/lib.a(xconnect.o): In function `str2sockaddr':
xconnect.c:(.text.str2sockaddr+0x252): ^[[1m^[[Kwarning^[[m^[[K: Using 'getaddrinfo' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
libbb/lib.a(inet_common.o): In function `INET_rresolve':
inet_common.c:(.text.INET_rresolve+0x222): ^[[1m^[[Kwarning^[[m^[[K: Using 'gethostbyaddr' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
util-linux/lib.a(mount.o): In function `nfsmount':
mount.c:(.text.nfsmount+0x1c2): ^[[1m^[[Kwarning^[[m^[[K: Using 'gethostbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
libbb/lib.a(xconnect.o): In function `bb_lookup_port':
xconnect.c:(.text.bb_lookup_port+0x92): ^[[1m^[[Kwarning^[[m^[[K: Using 'getservbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
^[[36m^[[K--^[[m^[[K
mount.c:(.text.nfsmount+0x14d2): undefined reference to `clnt_sperror'
mount.c:(.text.nfsmount+0x1552): undefined reference to `clnt_sperror'
mount.c:(.text.nfsmount+0x1952): undefined reference to `bindresvport'
mount.c:(.text.nfsmount+0x19f2): undefined reference to `pmap_getport'
collect2: ld returned 1 exit status
make: *** [busybox_unstripped] ^[[1m^[[KError ^[[m^[[K1
* Gentoo Linux Genkernel; Version 3.4.20^[[0m
* Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20120515 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20120515.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20120515.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20120515.tar.bz2 --kernel-config=/var/tmp/gentoo.config
* ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "all" target...
^[[32;01m*^[[0m -- End log... --
^[[32;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[32;01m*^[[0m errors that were reported above.
^[[32;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[32;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[32;01m*^[[0m as much information as you can in your bug report; attaching
^[[32;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[32;01m*^[[0m
^[[32;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[32;01m*^[[0m
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1458, in build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 206, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1256, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1484, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120515/.catalyst_lock'
Full build log at /tmp/catalyst-auto.27570/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2012-02-15 3:58 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2012-02-15 3:58 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.7.1
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2011 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache metadata_overlay pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Use of metadata_overlay module for portage enabled.
Envscript support enabled.
Using target: livecd-stage2
Building natively for ia64
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20120214/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20120214/
Location of the package cache is /var/tmp/catalyst/packages/default/livecd-stage2-ia64-20120214/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/livecd-stage2-ia64-20120214/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20120214/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20120214/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120214/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /var/tmp/catalyst/tmp/default/livecd-stage1-ia64-20120214/
to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120214/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
--- Running action sequence: build_kernel
copying pre-kmerge.sh to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120214/tmp/
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120214/tmp/
Running pre-kmerge.sh in chroot /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120214/
/usr/lib/portage/pym/portage/package/ebuild/config.py:353: UserWarning: 'cache.metadata_overlay.database' is deprecated: /etc/portage/modules
(user_auxdbmodule, modules_file))
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot genkernel
/usr/lib/portage/pym/portage/package/ebuild/config.py:353: UserWarning: 'cache.metadata_overlay.database' is deprecated: /etc/portage/modules
(user_auxdbmodule, modules_file))
>>> Verifying ebuild manifests
>>> Starting parallel fetch
>>> Emerging (1 of 2) app-arch/cpio-2.11
>>> Installing (1 of 2) app-arch/cpio-2.11
>>> Emerging (2 of 2) sys-kernel/genkernel-3.4.16
>>> Installing (2 of 2) sys-kernel/genkernel-3.4.16
* Messages for package sys-kernel/genkernel-3.4.16:
* Copying files to /var/cache/genkernel/src...
* Documentation is available in the genkernel manual page
* as well as the following URL:
* http://www.gentoo.org/doc/en/genkernel.xml
* This package is known to not work with reiser4. If you are running
* reiser4 and have a problem, do not file a bug. We know it does not
* work and we don't plan on fixing it since reiser4 is the one that is
* broken in this regard. Try using a sane filesystem like ext3 or
* even reiser3.
* The LUKS support has changed from versions prior to 3.4.4. Now,
* you use crypt_root=/dev/blah instead of real_root=luks:/dev/blah.
removing /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120214/tmp/chroot-functions.sh from the chroot
copying kmerge.sh to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120214/tmp/
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120214/tmp/
Running kmerge.sh in chroot /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120214/
/usr/lib/portage/pym/portage/package/ebuild/config.py:353: UserWarning: 'cache.metadata_overlay.database' is deprecated: /etc/portage/modules
(user_auxdbmodule, modules_file))
>>> Regenerating /etc/ld.so.cache...
Genkernel version 3.4.16 found ... continuing
emerge --quiet --nodeps --update --newuse gentoo-sources
/usr/lib/portage/pym/portage/package/ebuild/config.py:353: UserWarning: 'cache.metadata_overlay.database' is deprecated: /etc/portage/modules
(user_auxdbmodule, modules_file))
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-3.1.10-r1 for /tmp/kerncache/gentoo/
Traceback (most recent call last):
File "/usr/bin/emerge", line 43, in <module>
retval = emerge_main()
File "/usr/lib/portage/pym/_emerge/main.py", line 2028, in emerge_main
myopts, myaction, myfiles, spinner)
File "/usr/lib/portage/pym/_emerge/actions.py", line 442, in action_build
retval = mergetask.merge()
File "/usr/lib/portage/pym/_emerge/Scheduler.py", line 1054, in merge
rval = self._merge()
File "/usr/lib/portage/pym/_emerge/Scheduler.py", line 1399, in _merge
self._main_loop()
File "/usr/lib/portage/pym/_emerge/Scheduler.py", line 1546, in _main_loop
self._poll_loop()
File "/usr/lib/portage/pym/_emerge/PollScheduler.py", line 193, in _poll_loop
handler(f, event)
File "/usr/lib/portage/pym/_emerge/SpawnProcess.py", line 217, in _output_handler
files.log.flush()
IOError: [Errno 28] No space left on device
error writing /etc/mtab.tmp: No space left on device
error writing /etc/mtab.tmp: No space left on device
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120214/dev/pts: device is busy.
(In some cases useful info about processes that use
the device is found by lsof(8) or fuser(1))
!!! catalyst: Runscript kernel build failed
!!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120214//dev/pts failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
Killing process(es)
pid: process name
32166: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120214/usr/bin/sandbox
32167: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120214/bin/bash
32186: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120214/bin/bash
32194: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120214/bin/bzip2
32195: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120214/bin/tar
Press Ctrl-C within 10 seconds to abort
error writing /etc/mtab.tmp: No space left on device
error writing /etc/mtab.tmp: No space left on device
error writing /etc/mtab.tmp: No space left on device
error writing /etc/mtab.tmp: No space left on device
error writing /etc/mtab.tmp: No space left on device
error writing /etc/mtab.tmp: No space left on device
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120214/tmp/kerncache: not mounted
error writing /etc/mtab.tmp: No space left on device
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20120214/.catalyst_lock'
Full build log at /tmp/catalyst-auto.955/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2011-10-05 2:26 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2011-10-05 2:26 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.6.918
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2011 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache metadata_overlay pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Use of metadata_overlay module for portage enabled.
Envscript support enabled.
Using target: livecd-stage2
Building natively for ia64
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20111004/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20111004/
Location of the package cache is /var/tmp/catalyst/packages/default/livecd-stage2-ia64-20111004/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/livecd-stage2-ia64-20111004/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20111004/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20111004/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20111004/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /var/tmp/catalyst/tmp/default/livecd-stage1-ia64-20111004/
to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20111004/ (This may take some time) ...
rsync: writefd_unbuffered failed to write 4 bytes to socket [sender]: Broken pipe (32)
rsync: write failed on "/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20111004/usr/share/locale/da/LC_MESSAGES/libc.mo": No space left on device (28)
rsync error: error in file IO (code 11) at receiver.c(322) [receiver=3.0.8]
rsync: connection unexpectedly closed (287426 bytes received so far) [sender]
rsync error: error in rsync protocol data stream (code 12) at io.c(601) [sender=3.0.8]
!!! catalyst: Rsync of /var/tmp/catalyst/tmp/default/livecd-stage1-ia64-20111004/ to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20111004/ failed.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/livecd_stage2_target.py", line 117, in unpack
cmd(unpack_cmd,error_msg,env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20111004/.catalyst_lock'
Full build log at /tmp/catalyst-auto.28136/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2011-09-28 2:24 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2011-09-28 2:24 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.6.918
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2011 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache metadata_overlay pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Use of metadata_overlay module for portage enabled.
Envscript support enabled.
Using target: livecd-stage2
Building natively for ia64
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20110927/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20110927/
Location of the package cache is /var/tmp/catalyst/packages/default/livecd-stage2-ia64-20110927/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/livecd-stage2-ia64-20110927/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20110927/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20110927/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110927/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /var/tmp/catalyst/tmp/default/livecd-stage1-ia64-20110927/
to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110927/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
--- Running action sequence: build_kernel
copying pre-kmerge.sh to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110927/tmp/
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110927/tmp/
Running pre-kmerge.sh in chroot /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110927/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot genkernel
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/genkernel-3.4.16
>>> Installing (1 of 1) sys-kernel/genkernel-3.4.16
* Messages for package sys-kernel/genkernel-3.4.16:
* Copying files to /var/cache/genkernel/src...
* Documentation is available in the genkernel manual page
* as well as the following URL:
* http://www.gentoo.org/doc/en/genkernel.xml
* This package is known to not work with reiser4. If you are running
* reiser4 and have a problem, do not file a bug. We know it does not
* work and we don't plan on fixing it since reiser4 is the one that is
* broken in this regard. Try using a sane filesystem like ext3 or
* even reiser3.
* The LUKS support has changed from versions prior to 3.4.4. Now,
* you use crypt_root=/dev/blah instead of real_root=luks:/dev/blah.
removing /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110927/tmp/chroot-functions.sh from the chroot
copying kmerge.sh to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110927/tmp/
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110927/tmp/
Running kmerge.sh in chroot /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110927/
>>> Regenerating /etc/ld.so.cache...
Genkernel version 3.4.16 found ... continuing
emerge --quiet --nodeps --update --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-2.6.39-r3 for /tmp/kerncache/gentoo/
Traceback (most recent call last):
File "/usr/bin/emerge", line 43, in <module>
retval = emerge_main()
File "/usr/lib/portage/pym/_emerge/main.py", line 1906, in emerge_main
myopts, myaction, myfiles, spinner)
File "/usr/lib/portage/pym/_emerge/actions.py", line 437, in action_build
retval = mergetask.merge()
File "/usr/lib/portage/pym/_emerge/Scheduler.py", line 1073, in merge
rval = self._merge()
File "/usr/lib/portage/pym/_emerge/Scheduler.py", line 1423, in _merge
self._main_loop()
File "/usr/lib/portage/pym/_emerge/Scheduler.py", line 1573, in _main_loop
self._poll_loop()
File "/usr/lib/portage/pym/_emerge/PollScheduler.py", line 193, in _poll_loop
handler(f, event)
File "/usr/lib/portage/pym/_emerge/SpawnProcess.py", line 210, in _output_handler
files.log.flush()
IOError: [Errno 28] No space left on device
error writing /etc/mtab.tmp: No space left on device
error writing /etc/mtab.tmp: No space left on device
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110927/dev/pts: device is busy.
(In some cases useful info about processes that use
the device is found by lsof(8) or fuser(1))
!!! catalyst: Runscript kernel build failed
!!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110927//dev/pts failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
Killing process(es)
pid: process name
12994: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110927/usr/bin/sandbox
12995: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110927/bin/bash
13014: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110927/bin/bash
13022: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110927/bin/bzip2
13023: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110927/bin/tar
Press Ctrl-C within 10 seconds to abort
error writing /etc/mtab.tmp: No space left on device
error writing /etc/mtab.tmp: No space left on device
error writing /etc/mtab.tmp: No space left on device
error writing /etc/mtab.tmp: No space left on device
error writing /etc/mtab.tmp: No space left on device
error writing /etc/mtab.tmp: No space left on device
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110927/tmp/kerncache: not mounted
error writing /etc/mtab.tmp: No space left on device
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1465, in build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
/proc is still mounted; performing auto-bind-umount... !!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110927//tmp/kerncache failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
error writing /etc/mtab.tmp: No space left on device
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110927/tmp/kerncache: not mounted
error writing /etc/mtab.tmp: No space left on device
error writing /etc/mtab.tmp: No space left on device
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110927/usr/portage: not mounted
sys.excepthook is missing
Full build log at /tmp/catalyst-auto.7253/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2011-09-14 3:05 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2011-09-14 3:05 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
CC libbb/xconnect.o
CC libbb/xfuncs.o
libbb/xfuncs.c: In function 'malloc_or_warn':
libbb/xfuncs.c:28: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs.c: In function 'xmalloc':
libbb/xfuncs.c:37: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs.c: In function 'xrealloc':
libbb/xfuncs.c:48: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs.c: In function 'xstrdup':
libbb/xfuncs.c:72: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs.c: In function 'xfflush_stdout':
libbb/xfuncs.c:228: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs.c: In function 'xsetenv':
libbb/xfuncs.c:277: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs.c: In function 'xasprintf':
libbb/xfuncs.c:473: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
LD sysklogd/built-in.o
AR sysklogd/lib.a
LD util-linux/built-in.o
CC util-linux/dmesg.o
util-linux/dmesg.c: In function 'dmesg_main':
util-linux/dmesg.c:45: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'write', declared with attribute warn_unused_result
CC util-linux/freeramdisk.o
CC util-linux/hexdump.o
CC util-linux/losetup.o
CC util-linux/mdStart.o
util-linux/mdStart.c:30: ^[[1m^[[Kwarning^[[m^[[K: no previous prototype for 'mdstart_main'
util-linux/mdStart.c: In function 'mdstart_main':
util-linux/mdStart.c:36: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'bb_show_usage'
util-linux/mdStart.c:41: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'sscanf'
util-linux/mdStart.c:41: ^[[1m^[[Kwarning^[[m^[[K: incompatible implicit declaration of built-in function 'sscanf'
util-linux/mdStart.c:48: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'close'
util-linux/mdStart.c:51: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'printf'
util-linux/mdStart.c:51: ^[[1m^[[Kwarning^[[m^[[K: incompatible implicit declaration of built-in function 'printf'
CC util-linux/mdev.o
util-linux/mdev.c: In function 'make_device':
util-linux/mdev.c:182: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/mdev.c:182: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/mdev.c:183: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'symlink', declared with attribute warn_unused_result
util-linux/mdev.c:185: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'chown', declared with attribute warn_unused_result
util-linux/mdev.c: In function 'load_firmware':
util-linux/mdev.c:278: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'write', declared with attribute warn_unused_result
util-linux/mdev.c:280: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'write', declared with attribute warn_unused_result
util-linux/mdev.c: In function 'mdev_main':
util-linux/mdev.c:305: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/mdev.c:306: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
CC util-linux/more.o
util-linux/more.c: In function 'gotsig':
util-linux/more.c:44: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:44: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c: In function 'more_main':
util-linux/more.c:82: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:83: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:83: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:84: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:84: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:85: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:86: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:87: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:88: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:89: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:89: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:158: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:203: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:203: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
CC util-linux/mount.o
util-linux/mount.c: In function 'mount_it_now':
util-linux/mount.c:273: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
util-linux/mount.c: In function 'singlemount':
util-linux/mount.c:1464: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
CC util-linux/rdate.o
CC util-linux/swaponoff.o
CC util-linux/switch_root.o
CC util-linux/umount.o
util-linux/umount.c: In function 'umount_main':
util-linux/umount.c:96: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'realpath', declared with attribute warn_unused_result
^[[36m^[[K--^[[m^[[K
checking for kernel version... UNKNOWN
checking for kernel interface choice... ioctl
configure: creating ./config.status
config.status: creating Makefile
config.status: creating make.tmpl
config.status: ^[[1m^[[KWARNING^[[m^[[K: make.tmpl.in seems to ignore the --datarootdir setting
^[[36m^[[K--^[[m^[[K
gcc -c -Iioctl -I. -I../include -DDEVICE_UID=0 -DDEVICE_GID=0 -DDEVICE_MODE=0600 -DHAVE_CONFIG_H -DDM_IOCTLS -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -O2 regex/matcher.c -o regex/matcher.o
gcc -c -Iioctl -I. -I../include -DDEVICE_UID=0 -DDEVICE_GID=0 -DDEVICE_MODE=0600 -DHAVE_CONFIG_H -DDM_IOCTLS -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -O2 regex/parse_rx.c -o regex/parse_rx.o
gcc -c -Iioctl -I. -I../include -DDEVICE_UID=0 -DDEVICE_GID=0 -DDEVICE_MODE=0600 -DHAVE_CONFIG_H -DDM_IOCTLS -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -O2 regex/ttree.c -o regex/ttree.o
gcc -c -Iioctl -I. -I../include -DDEVICE_UID=0 -DDEVICE_GID=0 -DDEVICE_MODE=0600 -DHAVE_CONFIG_H -DDM_IOCTLS -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -O2 ioctl/libdm-iface.c -o ioctl/libdm-iface.o
ioctl/libdm-iface.c: In function '_unmarshal_status':
ioctl/libdm-iface.c:859: ^[[1m^[[Kwarning^[[m^[[K: cast increases required alignment of target type
^[[36m^[[K--^[[m^[[K
sed "s/\(.*\)\.o[ :]*/$FILE.o $FILE.d $FILE.pot: $DEPS /g" > dmsetup.d; \
[ -s dmsetup.d ] || rm -f dmsetup.d
make[1]: Leaving directory `/var/tmp/genkernel/1033.8189.15431.28883/device-mapper.1.02.22/dmsetup'
make[1]: Entering directory `/var/tmp/genkernel/1033.8189.15431.28883/device-mapper.1.02.22/dmsetup'
gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -O2 dmsetup.c -o dmsetup.o
dmsetup.c:1853: ^[[1m^[[Kwarning^[[m^[[K: cast from pointer to integer of different size
dmsetup.c:1854: ^[[1m^[[Kwarning^[[m^[[K: cast from pointer to integer of different size
dmsetup.c:1855: ^[[1m^[[Kwarning^[[m^[[K: cast from pointer to integer of different size
dmsetup.c:1856: ^[[1m^[[Kwarning^[[m^[[K: cast from pointer to integer of different size
dmsetup.c:1857: ^[[1m^[[Kwarning^[[m^[[K: cast from pointer to integer of different size
dmsetup.c:1859: ^[[1m^[[Kwarning^[[m^[[K: cast from pointer to integer of different size
^[[36m^[[K--^[[m^[[K
checking for rmdir... yes
checking for uname... yes
checking for dlopen in -ldl... yes
checking for sepol_check_context in -lsepol... no
checking for is_selinux_enabled in -lselinux... no
configure: ^[[1m^[[KWARNING^[[m^[[K: Disabling selinux
^[[36m^[[K--^[[m^[[K
checking for libdevmapper.h... yes
checking for modprobe... /sbin/modprobe
configure: creating ./config.status
config.status: creating Makefile
config.status: creating make.tmpl
config.status: ^[[1m^[[KWARNING^[[m^[[K: make.tmpl.in seems to ignore the --datarootdir setting
^[[36m^[[K--^[[m^[[K
gcc -c -I../include -DHAVE_CONFIG_H -I/var/tmp/genkernel/1033.8189.15431.28883/device-mapper/include -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -O2 device/dev-cache.c -o device/dev-cache.o
gcc -c -I../include -DHAVE_CONFIG_H -I/var/tmp/genkernel/1033.8189.15431.28883/device-mapper/include -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -O2 device/dev-io.c -o device/dev-io.o
gcc -c -I../include -DHAVE_CONFIG_H -I/var/tmp/genkernel/1033.8189.15431.28883/device-mapper/include -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -O2 device/dev-md.c -o device/dev-md.o
gcc -c -I../include -DHAVE_CONFIG_H -I/var/tmp/genkernel/1033.8189.15431.28883/device-mapper/include -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -O2 device/device.c -o device/device.o
device/device.c: In function '_has_partition_table':
device/device.c:83: ^[[1m^[[Kwarning^[[m^[[K: dereferencing pointer 'part' does break strict-aliasing rules
device/device.c:78: ^[[1m^[[Kwarning^[[m^[[K: dereferencing pointer 'part' does break strict-aliasing rules
^[[36m^[[K--^[[m^[[K
gcc -c -I../include -DHAVE_CONFIG_H -I/var/tmp/genkernel/1033.8189.15431.28883/device-mapper/include -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -O2 filters/filter-persistent.c -o filters/filter-persistent.o
gcc -c -I../include -DHAVE_CONFIG_H -I/var/tmp/genkernel/1033.8189.15431.28883/device-mapper/include -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -O2 filters/filter-regex.c -o filters/filter-regex.o
gcc -c -I../include -DHAVE_CONFIG_H -I/var/tmp/genkernel/1033.8189.15431.28883/device-mapper/include -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -O2 filters/filter-sysfs.c -o filters/filter-sysfs.o
gcc -c -I../include -DHAVE_CONFIG_H -I/var/tmp/genkernel/1033.8189.15431.28883/device-mapper/include -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -O2 filters/filter-md.c -o filters/filter-md.o
filters/filter-sysfs.c: In function '_read_devs':
filters/filter-sysfs.c:200: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'lstat'
filters/filter-sysfs.c:200: ^[[1m^[[Kwarning^[[m^[[K: nested extern declaration of 'lstat'
filters/filter-sysfs.c:201: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'S_ISLNK'
filters/filter-sysfs.c:201: ^[[1m^[[Kwarning^[[m^[[K: nested extern declaration of 'S_ISLNK'
filters/filter-sysfs.c:203: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'S_ISDIR'
filters/filter-sysfs.c:203: ^[[1m^[[Kwarning^[[m^[[K: nested extern declaration of 'S_ISDIR'
filters/filter-sysfs.c:205: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'S_ISREG'
filters/filter-sysfs.c:205: ^[[1m^[[Kwarning^[[m^[[K: nested extern declaration of 'S_ISREG'
^[[36m^[[K--^[[m^[[K
../lib/liblvm.a(filter-sysfs.o): In function `_read_devs':
filter-sysfs.c:(.text+0x632): undefined reference to `S_ISLNK'
filter-sysfs.c:(.text+0x652): undefined reference to `S_ISDIR'
filter-sysfs.c:(.text+0x7d2): undefined reference. to `S_ISREG'
./lib/liblvm.a(sharedlib.o): In function `load_shared_library':
sharedlib.c:(.text+0x1f2): collect2: ^[[1m^[[Kwarning^[[m^[[K: Using 'dlopen' in statically linked applications requires ld returned 1 exit status
^[[36m^[[K--^[[m^[[K
../lib/liblvm.a(filter-sysfs.o): In function `_read_devs':
filter-sysfs.c:(.text+0x632): undefined reference to `S_ISLNK'
filter-sysfs.c:(.text+0x652): undefined reference to `S_ISDIR'
filter-sysfs.c:(.text+0x7d2): undefined reference to `S_ISREG'
collect2: ld returned 1 exit status
make[1]: *** [lvm] ^[[1m^[[KError ^[[m^[[K1
make[1]: *** Waiting for unfinished jobs....
make[1]: *** [lvm.static] ^[[1m^[[KError ^[[m^[[K1
make[1]: Leaving directory `/var/tmp/genkernel/1033.8189.15431.28883/LVM2.2.02.28/tools'
make: *** [tools] ^[[1m^[[KError ^[[m^[[K2
* Gentoo Linux Genkernel; Version 3.4.10.907^[[0m
* Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20110913 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20110913.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20110913.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20110913.tar.bz2 --kernel-config=/var/tmp/gentoo.config
* ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[32;01m*^[[0m -- End log... --
^[[32;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[32;01m*^[[0m errors that were reported above.
^[[32;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[32;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[32;01m*^[[0m as much information as you can in your bug report; attaching
^[[32;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[32;01m*^[[0m
^[[32;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[32;01m*^[[0m
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1465, in build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1491, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110913/.catalyst_lock'
Full build log at /tmp/catalyst-auto.10494/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2011-09-07 3:05 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2011-09-07 3:05 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
libbb/xfuncs.c: In function 'xmalloc':
libbb/xfuncs.c:37: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs.c: In function 'xrealloc':
libbb/xfuncs.c:48: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs.c: In function 'xstrdup':
libbb/xfuncs.c:72: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs.c: In function 'xfflush_stdout':
libbb/xfuncs.c:228: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs.c: In function 'xsetenv':
libbb/xfuncs.c:277: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs.c: In function 'xasprintf':
libbb/xfuncs.c:473: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
LD sysklogd/built-in.o
AR sysklogd/lib.a
LD util-linux/built-in.o
CC util-linux/dmesg.o
util-linux/dmesg.c: In function 'dmesg_main':
util-linux/dmesg.c:45: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'write', declared with attribute warn_unused_result
CC util-linux/freeramdisk.o
CC util-linux/hexdump.o
CC util-linux/losetup.o
CC util-linux/mdStart.o
util-linux/mdStart.c:30: ^[[1m^[[Kwarning^[[m^[[K: no previous prototype for 'mdstart_main'
util-linux/mdStart.c: In function 'mdstart_main':
util-linux/mdStart.c:36: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'bb_show_usage'
util-linux/mdStart.c:41: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'sscanf'
util-linux/mdStart.c:41: ^[[1m^[[Kwarning^[[m^[[K: incompatible implicit declaration of built-in function 'sscanf'
util-linux/mdStart.c:48: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'close'
util-linux/mdStart.c:51: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'printf'
util-linux/mdStart.c:51: ^[[1m^[[Kwarning^[[m^[[K: incompatible implicit declaration of built-in function 'printf'
CC util-linux/mdev.o
util-linux/mdev.c: In function 'make_device':
util-linux/mdev.c:182: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/mdev.c:182: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/mdev.c:183: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'symlink', declared with attribute warn_unused_result
util-linux/mdev.c:185: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'chown', declared with attribute warn_unused_result
util-linux/mdev.c: In function 'load_firmware':
util-linux/mdev.c:278: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'write', declared with attribute warn_unused_result
util-linux/mdev.c:280: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'write', declared with attribute warn_unused_result
util-linux/mdev.c: In function 'mdev_main':
util-linux/mdev.c:305: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/mdev.c:306: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
CC util-linux/more.o
util-linux/more.c: In function 'gotsig':
util-linux/more.c:44: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:44: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c: In function 'more_main':
util-linux/more.c:82: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:83: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:83: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:84: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:84: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:85: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:86: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:87: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:88: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:89: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:89: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:158: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:203: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:203: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
CC util-linux/mount.o
util-linux/mount.c: In function 'mount_it_now':
util-linux/mount.c:273: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
util-linux/mount.c: In function 'singlemount':
util-linux/mount.c:1464: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
CC util-linux/rdate.o
CC util-linux/swaponoff.o
CC util-linux/switch_root.o
CC util-linux/umount.o
util-linux/umount.c: In function 'umount_main':
util-linux/umount.c:96: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'realpath', declared with attribute warn_unused_result
^[[36m^[[K--^[[m^[[K
checking for kernel version... UNKNOWN
checking for kernel interface choice... ioctl
configure: creating ./config.status
config.status: creating Makefile
config.status: creating make.tmpl
config.status: ^[[1m^[[KWARNING^[[m^[[K: make.tmpl.in seems to ignore the --datarootdir setting
^[[36m^[[K--^[[m^[[K
gcc -c -Iioctl -I. -I../include -DDEVICE_UID=0 -DDEVICE_GID=0 -DDEVICE_MODE=0600 -DHAVE_CONFIG_H -DDM_IOCTLS -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -O2 regex/matcher.c -o regex/matcher.o
gcc -c -Iioctl -I. -I../include -DDEVICE_UID=0 -DDEVICE_GID=0 -DDEVICE_MODE=0600 -DHAVE_CONFIG_H -DDM_IOCTLS -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -O2 regex/parse_rx.c -o regex/parse_rx.o
gcc -c -Iioctl -I. -I../include -DDEVICE_UID=0 -DDEVICE_GID=0 -DDEVICE_MODE=0600 -DHAVE_CONFIG_H -DDM_IOCTLS -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -O2 regex/ttree.c -o regex/ttree.o
gcc -c -Iioctl -I. -I../include -DDEVICE_UID=0 -DDEVICE_GID=0 -DDEVICE_MODE=0600 -DHAVE_CONFIG_H -DDM_IOCTLS -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -O2 ioctl/libdm-iface.c -o ioctl/libdm-iface.o
ioctl/libdm-iface.c: In function '_unmarshal_status':
ioctl/libdm-iface.c:859: ^[[1m^[[Kwarning^[[m^[[K: cast increases required alignment of target type
^[[36m^[[K--^[[m^[[K
sed "s/\(.*\)\.o[ :]*/$FILE.o $FILE.d $FILE.pot: $DEPS /g" > dmsetup.d; \
[ -s dmsetup.d ] || rm -f dmsetup.d
make[1]: Leaving directory `/var/tmp/genkernel/5392.27484.27216.3739/device-mapper.1.02.22/dmsetup'
make[1]: Entering directory `/var/tmp/genkernel/5392.27484.27216.3739/device-mapper.1.02.22/dmsetup'
gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -O2 dmsetup.c -o dmsetup.o
dmsetup.c:1853: ^[[1m^[[Kwarning^[[m^[[K: cast from pointer to integer of different size
dmsetup.c:1854: ^[[1m^[[Kwarning^[[m^[[K: cast from pointer to integer of different size
dmsetup.c:1855: ^[[1m^[[Kwarning^[[m^[[K: cast from pointer to integer of different size
dmsetup.c:1856: ^[[1m^[[Kwarning^[[m^[[K: cast from pointer to integer of different size
dmsetup.c:1857: ^[[1m^[[Kwarning^[[m^[[K: cast from pointer to integer of different size
dmsetup.c:1859: ^[[1m^[[Kwarning^[[m^[[K: cast from pointer to integer of different size
^[[36m^[[K--^[[m^[[K
checking for rmdir... yes
checking for uname... yes
checking for dlopen in -ldl... yes
checking for sepol_check_context in -lsepol... no
checking for is_selinux_enabled in -lselinux... no
configure: ^[[1m^[[KWARNING^[[m^[[K: Disabling selinux
^[[36m^[[K--^[[m^[[K
checking for libdevmapper.h... yes
checking for modprobe... /sbin/modprobe
configure: creating ./config.status
config.status: creating Makefile
config.status: creating make.tmpl
config.status: ^[[1m^[[KWARNING^[[m^[[K: make.tmpl.in seems to ignore the --datarootdir setting
^[[36m^[[K--^[[m^[[K
gcc -c -I../include -DHAVE_CONFIG_H -I/var/tmp/genkernel/5392.27484.27216.3739/device-mapper/include -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -O2 device/dev-cache.c -o device/dev-cache.o
gcc -c -I../include -DHAVE_CONFIG_H -I/var/tmp/genkernel/5392.27484.27216.3739/device-mapper/include -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -O2 device/dev-io.c -o device/dev-io.o
gcc -c -I../include -DHAVE_CONFIG_H -I/var/tmp/genkernel/5392.27484.27216.3739/device-mapper/include -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -O2 device/dev-md.c -o device/dev-md.o
gcc -c -I../include -DHAVE_CONFIG_H -I/var/tmp/genkernel/5392.27484.27216.3739/device-mapper/include -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -O2 device/device.c -o device/device.o
device/device.c: In function '_has_partition_table':
device/device.c:83: ^[[1m^[[Kwarning^[[m^[[K: dereferencing pointer 'part' does break strict-aliasing rules
device/device.c:78: ^[[1m^[[Kwarning^[[m^[[K: dereferencing pointer 'part' does break strict-aliasing rules
^[[36m^[[K--^[[m^[[K
gcc -c -I../include -DHAVE_CONFIG_H -I/var/tmp/genkernel/5392.27484.27216.3739/device-mapper/include -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -O2 filters/filter-persistent.c -o filters/filter-persistent.o
gcc -c -I../include -DHAVE_CONFIG_H -I/var/tmp/genkernel/5392.27484.27216.3739/device-mapper/include -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -O2 filters/filter-regex.c -o filters/filter-regex.o
gcc -c -I../include -DHAVE_CONFIG_H -I/var/tmp/genkernel/5392.27484.27216.3739/device-mapper/include -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -O2 filters/filter-sysfs.c -o filters/filter-sysfs.o
gcc -c -I../include -DHAVE_CONFIG_H -I/var/tmp/genkernel/5392.27484.27216.3739/device-mapper/include -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -O2 filters/filter-md.c -o filters/filter-md.o
filters/filter-sysfs.c: In function '_read_devs':
filters/filter-sysfs.c:200: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'lstat'
filters/filter-sysfs.c:200: ^[[1m^[[Kwarning^[[m^[[K: nested extern declaration of 'lstat'
filters/filter-sysfs.c:201: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'S_ISLNK'
filters/filter-sysfs.c:201: ^[[1m^[[Kwarning^[[m^[[K: nested extern declaration of 'S_ISLNK'
filters/filter-sysfs.c:203: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'S_ISDIR'
filters/filter-sysfs.c:203: ^[[1m^[[Kwarning^[[m^[[K: nested extern declaration of 'S_ISDIR'
filters/filter-sysfs.c:205: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'S_ISREG'
filters/filter-sysfs.c:205: ^[[1m^[[Kwarning^[[m^[[K: nested extern declaration of 'S_ISREG'
^[[36m^[[K--^[[m^[[K
gcc -o lvm -I/var/tmp/genkernel/5392.27484.27216.3739/device-mapper/include -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -O2 dumpconfig.o formats.o lvchange.o lvconvert.o lvcreate.o lvdisplay.o lvextend.o lvmchange.o lvmcmdline.o lvmdiskscan.o lvreduce.o lvremove.o lvrename.o lvresize.o lvscan.o polldaemon.o pvchange.o pvck.o pvcreate.o pvdisplay.o pvmove.o pvremove.o pvresize.o pvscan.o reporter.o segtypes.o toollib.o vgcfgbackup.o vgcfgrestore.o vgchange.o vgck.o vgcreate.o vgconvert.o vgdisplay.o vgexport.o vgextend.o vgimport.o vgmerge.o vgmknodes.o vgreduce.o vgremove.o vgrename.o vgscan.o vgsplit.o lvm.o \
-L/var/tmp/genkernel/5392.27484.27216.3739/device-mapper/lib -Wl,--export-dynamic -L../lib -L/var/tmp/genkernel/5392.27484.27216.3739/lvm/lib -llvm -ldevmapper -lrt -ldl -rdynamic
gcc -o lvm.static -I/var/tmp/genkernel/5392.27484.27216.3739/device-mapper/include -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -O2 dumpconfig.o formats.o lvchange.o lvconvert.o lvcreate.o lvdisplay.o lvextend.o lvmchange.o lvmcmdline.o lvmdiskscan.o lvreduce.o lvremove.o lvrename.o lvresize.o lvscan.o polldaemon.o pvchange.o pvck.o pvcreate.o pvdisplay.o pvmove.o pvremove.o pvresize.o pvscan.o reporter.o segtypes.o toollib.o vgcfgbackup.o vgcfgrestore.o vgchange.o vgck.o vgcreate.o vgconvert.o vgdisplay.o vgexport.o vgextend.o vgimport.o vgmerge.o vgmknodes.o vgreduce.o vgremove.o vgrename.o vgscan.o vgsplit.o lvm-static.o -static \
-L/var/tmp/genkernel/5392.27484.27216.3739/device-mapper/lib -Wl,--export-dynamic -L../lib -L/var/tmp/genkernel/5392.27484.27216.3739/lvm/lib -llvm -ldevmapper -lrt -ldl -rdynamic
../lib/liblvm.a(sharedlib.o): In function `load_shared_library':
sharedlib.c:(.text+0x1f2): ^[[1m^[[Kwarning^[[m^[[K: Using 'dlopen' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
../lib/liblvm.a(filter-sysfs.o): In function `_read_devs':
filter-sysfs.c:(.text+0x632): undefined reference to `S_ISLNK'
filter-sysfs.c:(.text+0x652): undefined reference to `S_ISDIR'
filter-sysfs.c:(.text+0x7d2): undefined reference to `S_ISREG'
collect2: ld returned 1 exit status
make[1]: *** [lvm.static] ^[[1m^[[KError ^[[m^[[K1
^[[36m^[[K--^[[m^[[K
../lib/liblvm.a(filter-sysfs.o): In function `_read_devs':
filter-sysfs.c:(.text+0x632): undefined reference to `S_ISLNK'
filter-sysfs.c:(.text+0x652): undefined reference to `S_ISDIR'
filter-sysfs.c:(.text+0x7d2): undefined reference to `S_ISREG'
collect2: ld returned 1 exit status
make[1]: *** [lvm] ^[[1m^[[KError ^[[m^[[K1
make[1]: Leaving directory `/var/tmp/genkernel/5392.27484.27216.3739/LVM2.2.02.28/tools'
make: *** [tools] ^[[1m^[[KError ^[[m^[[K2
* Gentoo Linux Genkernel; Version 3.4.10.907^[[0m
* Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20110906 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20110906.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20110906.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20110906.tar.bz2 --kernel-config=/var/tmp/gentoo.config
* ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[32;01m*^[[0m -- End log... --
^[[32;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[32;01m*^[[0m errors that were reported above.
^[[32;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[32;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[32;01m*^[[0m as much information as you can in your bug report; attaching
^[[32;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[32;01m*^[[0m
^[[32;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[32;01m*^[[0m
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1465, in build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1491, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110906/.catalyst_lock'
Full build log at /tmp/catalyst-auto.13898/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2011-08-31 3:07 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2011-08-31 3:07 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
CC libbb/xconnect.o
CC libbb/xfuncs.o
libbb/xfuncs.c: In function 'malloc_or_warn':
libbb/xfuncs.c:28: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs.c: In function 'xmalloc':
libbb/xfuncs.c:37: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs.c: In function 'xrealloc':
libbb/xfuncs.c:48: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs.c: In function 'xstrdup':
libbb/xfuncs.c:72: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs.c: In function 'xfflush_stdout':
libbb/xfuncs.c:228: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs.c: In function 'xsetenv':
libbb/xfuncs.c:277: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
libbb/xfuncs.c: In function 'xasprintf':
libbb/xfuncs.c:473: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
LD sysklogd/built-in.o
AR sysklogd/lib.a
LD util-linux/built-in.o
CC util-linux/dmesg.o
util-linux/dmesg.c: In function 'dmesg_main':
util-linux/dmesg.c:45: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'write', declared with attribute warn_unused_result
CC util-linux/freeramdisk.o
CC util-linux/hexdump.o
CC util-linux/losetup.o
CC util-linux/mdStart.o
util-linux/mdStart.c:30: ^[[1m^[[Kwarning^[[m^[[K: no previous prototype for 'mdstart_main'
util-linux/mdStart.c: In function 'mdstart_main':
util-linux/mdStart.c:36: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'bb_show_usage'
util-linux/mdStart.c:41: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'sscanf'
util-linux/mdStart.c:41: ^[[1m^[[Kwarning^[[m^[[K: incompatible implicit declaration of built-in function 'sscanf'
util-linux/mdStart.c:48: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'close'
util-linux/mdStart.c:51: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'printf'
util-linux/mdStart.c:51: ^[[1m^[[Kwarning^[[m^[[K: incompatible implicit declaration of built-in function 'printf'
CC util-linux/mdev.o
util-linux/mdev.c: In function 'make_device':
util-linux/mdev.c:182: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/mdev.c:182: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/mdev.c:183: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'symlink', declared with attribute warn_unused_result
util-linux/mdev.c:185: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'chown', declared with attribute warn_unused_result
util-linux/mdev.c: In function 'load_firmware':
util-linux/mdev.c:278: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'write', declared with attribute warn_unused_result
util-linux/mdev.c:280: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'write', declared with attribute warn_unused_result
util-linux/mdev.c: In function 'mdev_main':
util-linux/mdev.c:305: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/mdev.c:306: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
CC util-linux/more.o
util-linux/more.c: In function 'gotsig':
util-linux/more.c:44: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:44: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c: In function 'more_main':
util-linux/more.c:82: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:83: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:83: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:84: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:84: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:85: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:86: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:87: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:88: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:89: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:89: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:158: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:203: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
util-linux/more.c:203: ^[[1m^[[Kwarning^[[m^[[K: dereferencing type-punned pointer will break strict-aliasing rules
CC util-linux/mount.o
util-linux/mount.c: In function 'mount_it_now':
util-linux/mount.c:273: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
util-linux/mount.c: In function 'singlemount':
util-linux/mount.c:1464: ^[[1m^[[Kwarning^[[m^[[K: format not a string literal and no format arguments
^[[36m^[[K--^[[m^[[K
CC util-linux/rdate.o
CC util-linux/swaponoff.o
CC util-linux/switch_root.o
CC util-linux/umount.o
util-linux/umount.c: In function 'umount_main':
util-linux/umount.c:96: ^[[1m^[[Kwarning^[[m^[[K: ignoring return value of 'realpath', declared with attribute warn_unused_result
^[[36m^[[K--^[[m^[[K
checking for kernel version... UNKNOWN
checking for kernel interface choice... ioctl
configure: creating ./config.status
config.status: creating Makefile
config.status: creating make.tmpl
config.status: ^[[1m^[[KWARNING^[[m^[[K: make.tmpl.in seems to ignore the --datarootdir setting
^[[36m^[[K--^[[m^[[K
gcc -c -Iioctl -I. -I../include -DDEVICE_UID=0 -DDEVICE_GID=0 -DDEVICE_MODE=0600 -DHAVE_CONFIG_H -DDM_IOCTLS -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -O2 regex/matcher.c -o regex/matcher.o
gcc -c -Iioctl -I. -I../include -DDEVICE_UID=0 -DDEVICE_GID=0 -DDEVICE_MODE=0600 -DHAVE_CONFIG_H -DDM_IOCTLS -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -O2 regex/parse_rx.c -o regex/parse_rx.o
gcc -c -Iioctl -I. -I../include -DDEVICE_UID=0 -DDEVICE_GID=0 -DDEVICE_MODE=0600 -DHAVE_CONFIG_H -DDM_IOCTLS -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -O2 regex/ttree.c -o regex/ttree.o
gcc -c -Iioctl -I. -I../include -DDEVICE_UID=0 -DDEVICE_GID=0 -DDEVICE_MODE=0600 -DHAVE_CONFIG_H -DDM_IOCTLS -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -O2 ioctl/libdm-iface.c -o ioctl/libdm-iface.o
ioctl/libdm-iface.c: In function '_unmarshal_status':
ioctl/libdm-iface.c:859: ^[[1m^[[Kwarning^[[m^[[K: cast increases required alignment of target type
^[[36m^[[K--^[[m^[[K
sed "s/\(.*\)\.o[ :]*/$FILE.o $FILE.d $FILE.pot: $DEPS /g" > dmsetup.d; \
[ -s dmsetup.d ] || rm -f dmsetup.d
make[1]: Leaving directory `/var/tmp/genkernel/18896.6127.29773.22382/device-mapper.1.02.22/dmsetup'
make[1]: Entering directory `/var/tmp/genkernel/18896.6127.29773.22382/device-mapper.1.02.22/dmsetup'
gcc -c -I. -I../include -DHAVE_CONFIG_H -DDM_IOCTLS -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -O2 dmsetup.c -o dmsetup.o
dmsetup.c:1853: ^[[1m^[[Kwarning^[[m^[[K: cast from pointer to integer of different size
dmsetup.c:1854: ^[[1m^[[Kwarning^[[m^[[K: cast from pointer to integer of different size
dmsetup.c:1855: ^[[1m^[[Kwarning^[[m^[[K: cast from pointer to integer of different size
dmsetup.c:1856: ^[[1m^[[Kwarning^[[m^[[K: cast from pointer to integer of different size
dmsetup.c:1857: ^[[1m^[[Kwarning^[[m^[[K: cast from pointer to integer of different size
dmsetup.c:1859: ^[[1m^[[Kwarning^[[m^[[K: cast from pointer to integer of different size
^[[36m^[[K--^[[m^[[K
checking for rmdir... yes
checking for uname... yes
checking for dlopen in -ldl... yes
checking for sepol_check_context in -lsepol... no
checking for is_selinux_enabled in -lselinux... no
configure: ^[[1m^[[KWARNING^[[m^[[K: Disabling selinux
^[[36m^[[K--^[[m^[[K
checking for libdevmapper.h... yes
checking for modprobe... /sbin/modprobe
configure: creating ./config.status
config.status: creating Makefile
config.status: creating make.tmpl
config.status: ^[[1m^[[KWARNING^[[m^[[K: make.tmpl.in seems to ignore the --datarootdir setting
^[[36m^[[K--^[[m^[[K
gcc -c -I../include -DHAVE_CONFIG_H -I/var/tmp/genkernel/18896.6127.29773.22382/device-mapper/include -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -O2 device/dev-cache.c -o device/dev-cache.o
gcc -c -I../include -DHAVE_CONFIG_H -I/var/tmp/genkernel/18896.6127.29773.22382/device-mapper/include -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -O2 device/dev-io.c -o device/dev-io.o
gcc -c -I../include -DHAVE_CONFIG_H -I/var/tmp/genkernel/18896.6127.29773.22382/device-mapper/include -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -O2 device/dev-md.c -o device/dev-md.o
gcc -c -I../include -DHAVE_CONFIG_H -I/var/tmp/genkernel/18896.6127.29773.22382/device-mapper/include -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -O2 device/device.c -o device/device.o
device/device.c: In function '_has_partition_table':
device/device.c:83: ^[[1m^[[Kwarning^[[m^[[K: dereferencing pointer 'part' does break strict-aliasing rules
device/device.c:78: ^[[1m^[[Kwarning^[[m^[[K: dereferencing pointer 'part' does break strict-aliasing rules
^[[36m^[[K--^[[m^[[K
gcc -c -I../include -DHAVE_CONFIG_H -I/var/tmp/genkernel/18896.6127.29773.22382/device-mapper/include -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -O2 filters/filter-persistent.c -o filters/filter-persistent.o
gcc -c -I../include -DHAVE_CONFIG_H -I/var/tmp/genkernel/18896.6127.29773.22382/device-mapper/include -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -O2 filters/filter-regex.c -o filters/filter-regex.o
gcc -c -I../include -DHAVE_CONFIG_H -I/var/tmp/genkernel/18896.6127.29773.22382/device-mapper/include -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -O2 filters/filter-sysfs.c -o filters/filter-sysfs.o
gcc -c -I../include -DHAVE_CONFIG_H -I/var/tmp/genkernel/18896.6127.29773.22382/device-mapper/include -fPIC -Wall -Wundef -Wshadow -Wcast-align -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wmissing-noreturn -Wformat-security -O2 filters/filter-md.c -o filters/filter-md.o
filters/filter-sysfs.c: In function '_read_devs':
filters/filter-sysfs.c:200: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'lstat'
filters/filter-sysfs.c:200: ^[[1m^[[Kwarning^[[m^[[K: nested extern declaration of 'lstat'
filters/filter-sysfs.c:201: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'S_ISLNK'
filters/filter-sysfs.c:201: ^[[1m^[[Kwarning^[[m^[[K: nested extern declaration of 'S_ISLNK'
filters/filter-sysfs.c:203: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'S_ISDIR'
filters/filter-sysfs.c:203: ^[[1m^[[Kwarning^[[m^[[K: nested extern declaration of 'S_ISDIR'
filters/filter-sysfs.c:205: ^[[1m^[[Kwarning^[[m^[[K: implicit declaration of function 'S_ISREG'
filters/filter-sysfs.c:205: ^[[1m^[[Kwarning^[[m^[[K: nested extern declaration of 'S_ISREG'
^[[36m^[[K--^[[m^[[K
../lib/liblvm.a(filter-sysfs.o): In function `_read_devs':
filter-sysfs.c:(.text+0x632): undefined reference to `S_ISLNK'
filter-sysfs.c:(.text+0x652): undefined reference to `S_ISDIR'
filter-sysfs.c:(.text+0x7d2): undefined reference to `S_ISREG'
collect2: ld returned 1 exit status
make[1]: *** [lvm] ^[[1m^[[KError ^[[m^[[K1
make[1]: *** Waiting for unfinished jobs....
../lib/liblvm.a(sharedlib.o): In function `load_shared_library':
sharedlib.c:(.text+0x1f2): ^[[1m^[[Kwarning^[[m^[[K: Using 'dlopen' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
../lib/liblvm.a(filter-sysfs.o): In function `_read_devs':
filter-sysfs.c:(.text+0x632): undefined reference to `S_ISLNK'
filter-sysfs.c:(.text+0x652): undefined reference to `S_ISDIR'
filter-sysfs.c:(.text+0x7d2): undefined reference to `S_ISREG'
collect2: ld returned 1 exit status
make[1]: *** [lvm.static] ^[[1m^[[KError ^[[m^[[K1
make[1]: Leaving directory `/var/tmp/genkernel/18896.6127.29773.22382/LVM2.2.02.28/tools'
make: *** [tools] ^[[1m^[[KError ^[[m^[[K2
* Gentoo Linux Genkernel; Version 3.4.10.907^[[0m
* Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20110830 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20110830.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20110830.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20110830.tar.bz2 --kernel-config=/var/tmp/gentoo.config
* ^[[1m^[[KERROR:^[[m^[[K ^[[1m^[[KFailed^[[m^[[K to compile the "" target...
^[[32;01m*^[[0m -- End log... --
^[[32;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[32;01m*^[[0m errors that were reported above.
^[[32;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[32;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[32;01m*^[[0m as much information as you can in your bug report; attaching
^[[32;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[32;01m*^[[0m
^[[32;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[32;01m*^[[0m
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1465, in build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1491, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110830/.catalyst_lock'
Full build log at /tmp/catalyst-auto.27944/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2011-08-24 2:30 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2011-08-24 2:30 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* ERROR: sys-kernel/gentoo-sources-2.6.39-r3 failed (unpack phase):
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-kernel/gentoo-sources-2.6.39-r3/temp/logging/unpack: No space left on device
* failure unpacking linux-2.6.39.tar.bz2
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-kernel/gentoo-sources-2.6.39-r3/temp/logging/unpack: No space left on device
*
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-kernel/gentoo-sources-2.6.39-r3/temp/logging/unpack: No space left on device
* Call stack:
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-kernel/gentoo-sources-2.6.39-r3/temp/logging/unpack: No space left on device
* ebuild.sh, line 56: Called src_unpack
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-kernel/gentoo-sources-2.6.39-r3/temp/logging/unpack: No space left on device
* environment, line 3222: Called kernel-2_src_unpack
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-kernel/gentoo-sources-2.6.39-r3/temp/logging/unpack: No space left on device
* environment, line 2402: Called universal_unpack
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-kernel/gentoo-sources-2.6.39-r3/temp/logging/unpack: No space left on device
* environment, line 3821: Called unpack 'linux-2.6.39.tar.bz2'
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-kernel/gentoo-sources-2.6.39-r3/temp/logging/unpack: No space left on device
* ebuild.sh, line 397: Called _unpack_tar 'bzip2 -d'
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-kernel/gentoo-sources-2.6.39-r3/temp/logging/unpack: No space left on device
* ebuild.sh, line 369: Called assert_sigpipe_ok 'failure unpacking linux-2.6.39.tar.bz2'
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-kernel/gentoo-sources-2.6.39-r3/temp/logging/unpack: No space left on device
* isolated-functions.sh, line 37: Called die
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-kernel/gentoo-sources-2.6.39-r3/temp/logging/unpack: No space left on device
* The specific snippet of code:
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-kernel/gentoo-sources-2.6.39-r3/temp/logging/unpack: No space left on device
* [[ $x -ne 0 && $x -ne ${PORTAGE_SIGPIPE_STATUS:-141} ]] && die "$@"
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-kernel/gentoo-sources-2.6.39-r3/temp/logging/unpack: No space left on device
*
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-kernel/gentoo-sources-2.6.39-r3/temp/logging/unpack: No space left on device
* If you need support, post the output of 'emerge --info =sys-kernel/gentoo-sources-2.6.39-r3',
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-kernel/gentoo-sources-2.6.39-r3/temp/logging/unpack: No space left on device
* the complete build log and the output of 'emerge -pqv =sys-kernel/gentoo-sources-2.6.39-r3'.
/usr/lib/portage/bin/isolated-functions.sh: line 211: /var/tmp/portage/sys-kernel/gentoo-sources-2.6.39-r3/.die_hooks: No space left on device
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-kernel/gentoo-sources-2.6.39-r3/temp/logging/unpack: No space left on device
* The complete build log is located at '/var/tmp/portage/sys-kernel/gentoo-sources-2.6.39-r3/temp/build.log'.
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-kernel/gentoo-sources-2.6.39-r3/temp/logging/unpack: No space left on device
* The ebuild environment file is located at '/var/tmp/portage/sys-kernel/gentoo-sources-2.6.39-r3/temp/environment'.
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-kernel/gentoo-sources-2.6.39-r3/temp/logging/unpack: No space left on device
* S: '/var/tmp/portage/sys-kernel/gentoo-sources-2.6.39-r3/work/linux-2.6.39-gentoo-r3'
Traceback (most recent call last):
File "/usr/lib/portage/bin/ebuild-ipc.py", line 276, in <module>
sys.exit(ebuild_ipc_main(sys.argv[1:]))
File "/usr/lib/portage/bin/ebuild-ipc.py", line 273, in ebuild_ipc_main
return ebuild_ipc.communicate(args)
File "/usr/lib/portage/bin/ebuild-ipc.py", line 63, in communicate
lock_obj = portage.locks.lockfile(self.ipc_lock_file, unlinkfile=True)
File "/usr/lib/portage/pym/portage/locks.py", line 73, in lockfile
myfd = os.open(lockfilename, os.O_CREAT|os.O_RDWR, 0o660)
File "/usr/lib/portage/pym/portage/__init__.py", line 222, in __call__
rval = self._func(*wrapped_args, **wrapped_kwargs)
OSError: [Errno 28] No space left on device: '/var/tmp/portage/sys-kernel/gentoo-sources-2.6.39-r3/.ipc_lock'
* The ebuild phase 'unpack' has exited unexpectedly. This type of behavior
* is known to be triggered by things such as failed variable assignments
* (bug #190128) or bad substitution errors (bug #200313). Normally, before
* exiting, bash should have displayed an error message above. If bash did
* not produce an error message above, it's possible that the ebuild has
* called `exit` when it should have called `die` instead. This behavior
* may also be triggered by a corrupt bash binary or a hardware problem
* such as memory or cpu malfunction. If the problem is not reproducible or
* it appears to occur randomly, then it is likely to be triggered by a
* hardware problem. If you suspect a hardware problem then you should try
* some basic hardware diagnostics such as memtest. Please do not report
* this as a bug unless it is consistently reproducible and you are sure
* that your bash binary and hardware are functioning properly.
/usr/lib/portage/bin/misc-functions.sh: line 967: /var/tmp/portage/sys-kernel/gentoo-sources-2.6.39-r3/.die_hooks: No space left on device
Traceback (most recent call last):
File "/usr/lib/portage/bin/ebuild-ipc.py", line 276, in <module>
sys.exit(ebuild_ipc_main(sys.argv[1:]))
File "/usr/lib/portage/bin/ebuild-ipc.py", line 273, in ebuild_ipc_main
return ebuild_ipc.communicate(args)
File "/usr/lib/portage/bin/ebuild-ipc.py", line 63, in communicate
lock_obj = portage.locks.lockfile(self.ipc_lock_file, unlinkfile=True)
File "/usr/lib/portage/pym/portage/locks.py", line 73, in lockfile
myfd = os.open(lockfilename, os.O_CREAT|os.O_RDWR, 0o660)
File "/usr/lib/portage/pym/portage/__init__.py", line 222, in __call__
rval = self._func(*wrapped_args, **wrapped_kwargs)
OSError: [Errno 28] No space left on device: '/var/tmp/portage/sys-kernel/gentoo-sources-2.6.39-r3/.ipc_lock'
* The ebuild phase 'die_hooks' has exited unexpectedly. This type of
* behavior is known to be triggered by things such as failed variable
* assignments (bug #190128) or bad substitution errors (bug #200313).
* Normally, before exiting, bash should have displayed an error message
* above. If bash did not produce an error message above, it's possible
* that the ebuild has called `exit` when it should have called `die`
* instead. This behavior may also be triggered by a corrupt bash binary or
* a hardware problem such as memory or cpu malfunction. If the problem is
* not reproducible or it appears to occur randomly, then it is likely to
* be triggered by a hardware problem. If you suspect a hardware problem
* then you should try some basic hardware diagnostics such as memtest.
* Please do not report this as a bug unless it is consistently
* reproducible and you are sure that your bash binary and hardware are
* functioning properly.
* Messages for package sys-kernel/gentoo-sources-2.6.39-r3 merged to /tmp/kerncache/gentoo/:
* The ebuild phase 'unpack' has exited unexpectedly. This type of behavior
* is known to be triggered by things such as failed variable assignments
* (bug #190128) or bad substitution errors (bug #200313). Normally, before
* exiting, bash should have displayed an error message above. If bash did
* not produce an error message above, it's possible that the ebuild has
* called `exit` when it should have called `die` instead. This behavior
* may also be triggered by a corrupt bash binary or a hardware problem
* such as memory or cpu malfunction. If the problem is not reproducible or
* it appears to occur randomly, then it is likely to be triggered by a
* hardware problem. If you suspect a hardware problem then you should try
* some basic hardware diagnostics such as memtest. Please do not report
* this as a bug unless it is consistently reproducible and you are sure
* that your bash binary and hardware are functioning properly.
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110823/tmp/kerncache: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1465, in build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
/proc is still mounted; performing auto-bind-umount... !!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110823//tmp/kerncache failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110823/tmp/kerncache: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110823/usr/portage: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110823//tmp/kerncache
!!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110823//usr/portage failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110823/usr/portage: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110823/dev: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110823//usr/portage
!!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110823//dev failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110823/dev: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110823/proc: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110823//dev
!!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110823//proc failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110823/proc: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110823//proc
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1491, in build_kernel
"build aborting due to kernel build error."
CatalystError
None
!!! catalyst: Couldn't umount one or more bind-mounts; aborting for safety.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 609, in mount_safety_check
self.unbind()
File "modules/generic_stage_target.py", line 936, in unbind
"Couldn't umount one or more bind-mounts; aborting for safety."
CatalystError
None
!!! catalyst: Unable to auto-unbind /proc
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1265, in run
self.mount_safety_check()
File "modules/generic_stage_target.py", line 615, in mount_safety_check
raise CatalystError, "Unable to auto-unbind "+x
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110823/.catalyst_lock'
Full build log at /tmp/catalyst-auto.17314/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2011-07-06 1:40 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2011-07-06 1:40 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.6.916
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2011 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache metadata_overlay pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Use of metadata_overlay module for portage enabled.
Envscript support enabled.
Using target: livecd-stage2
Building natively for ia64
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20110705/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20110705/
Location of the package cache is /var/tmp/catalyst/packages/default/livecd-stage2-ia64-20110705/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/livecd-stage2-ia64-20110705/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20110705/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20110705/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110705/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /var/tmp/catalyst/tmp/default/livecd-stage1-ia64-20110705/
to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110705/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
--- Running action sequence: build_kernel
copying pre-kmerge.sh to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110705/tmp/
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110705/tmp/
Running pre-kmerge.sh in chroot /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110705/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot genkernel
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/genkernel-3.4.10.907-r1
>>> Installing (1 of 1) sys-kernel/genkernel-3.4.10.907-r1
* Messages for package sys-kernel/genkernel-3.4.10.907-r1:
* Copying files to /var/cache/genkernel/src...
* Documentation is available in the genkernel manual page
* as well as the following URL:
* http://www.gentoo.org/doc/en/genkernel.xml
* This package is known to not work with reiser4. If you are running
* reiser4 and have a problem, do not file a bug. We know it does not
* work and we don't plan on fixing it since reiser4 is the one that is
* broken in this regard. Try using a sane filesystem like ext3 or
* even reiser3.
* The LUKS support has changed from versions prior to 3.4.4. Now,
* you use crypt_root=/dev/blah instead of real_root=luks:/dev/blah.
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
removing /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110705/tmp/chroot-functions.sh from the chroot
copying kmerge.sh to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110705/tmp/
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110705/tmp/
Running kmerge.sh in chroot /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110705/
>>> Regenerating /etc/ld.so.cache...
Genkernel version 3.4.10.907 found ... continuing
emerge --quiet --nodeps --update --newuse gentoo-sources
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-2.6.38-r6 for /tmp/kerncache/gentoo/
>>> Installing (1 of 1) sys-kernel/gentoo-sources-2.6.38-r6 to /tmp/kerncache/gentoo/
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-2.6.38-r6 merged to /tmp/kerncache/gentoo/:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: http://www.gentoo.org/doc/en/kernel-upgrade.xml
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
ln: failed to create symbolic link `/usr/src/linux': No such file or directory
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.4.10.907^[[0m
^[[32;01m*^[[0m Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20110705 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20110705.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20110705.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20110705.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m ERROR: kernel source directory "/usr/src/linux" was not found!
^[[32;01m*^[[0m -- Grepping log... --
* Gentoo Linux Genkernel; Version 3.4.10.907^[[0m
* Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20110705 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20110705.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20110705.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20110705.tar.bz2 --kernel-config=/var/tmp/gentoo.config
* ^[[1m^[[KERROR:^[[m^[[K kernel source directory "/usr/src/linux" was not found!
^[[32;01m*^[[0m -- End log... --
^[[32;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[32;01m*^[[0m errors that were reported above.
^[[32;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[32;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[32;01m*^[[0m as much information as you can in your bug report; attaching
^[[32;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[32;01m*^[[0m
^[[32;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[32;01m*^[[0m
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1465, in build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1491, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110705/.catalyst_lock'
Full build log at /tmp/catalyst-auto.7522/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2011-06-15 1:37 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2011-06-15 1:37 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.6.916
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2011 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache metadata_overlay pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Use of metadata_overlay module for portage enabled.
Envscript support enabled.
Using target: livecd-stage2
Building natively for ia64
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20110614/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20110614/
Location of the package cache is /var/tmp/catalyst/packages/default/livecd-stage2-ia64-20110614/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/livecd-stage2-ia64-20110614/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20110614/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20110614/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110614/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /var/tmp/catalyst/tmp/default/livecd-stage1-ia64-20110614/
to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110614/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
--- Running action sequence: build_kernel
copying pre-kmerge.sh to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110614/tmp/
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110614/tmp/
Running pre-kmerge.sh in chroot /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110614/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot genkernel
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/genkernel-3.4.10.907
>>> Installing (1 of 1) sys-kernel/genkernel-3.4.10.907
* Messages for package sys-kernel/genkernel-3.4.10.907:
* Copying files to /var/cache/genkernel/src...
* Documentation is available in the genkernel manual page
* as well as the following URL:
* http://www.gentoo.org/doc/en/genkernel.xml
* This package is known to not work with reiser4. If you are running
* reiser4 and have a problem, do not file a bug. We know it does not
* work and we don't plan on fixing it since reiser4 is the one that is
* broken in this regard. Try using a sane filesystem like ext3 or
* even reiser3.
* The LUKS support has changed from versions prior to 3.4.4. Now,
* you use crypt_root=/dev/blah instead of real_root=luks:/dev/blah.
* GNU info directory index is up-to-date.
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
removing /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110614/tmp/chroot-functions.sh from the chroot
copying kmerge.sh to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110614/tmp/
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110614/tmp/
Running kmerge.sh in chroot /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110614/
>>> Regenerating /etc/ld.so.cache...
Genkernel version 3.4.10.907 found ... continuing
emerge --quiet --nodeps --update --newuse gentoo-sources
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-2.6.38-r6 for /tmp/kerncache/gentoo/
>>> Installing (1 of 1) sys-kernel/gentoo-sources-2.6.38-r6 to /tmp/kerncache/gentoo/
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-2.6.38-r6 merged to /tmp/kerncache/gentoo/:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: http://www.gentoo.org/doc/en/kernel-upgrade.xml
* GNU info directory index is up-to-date.
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
ln: failed to create symbolic link `/usr/src/linux': No such file or directory
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.4.10.907^[[0m
^[[32;01m*^[[0m Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20110614 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20110614.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20110614.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20110614.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m ERROR: kernel source directory "/usr/src/linux" was not found!
^[[32;01m*^[[0m -- Grepping log... --
* Gentoo Linux Genkernel; Version 3.4.10.907^[[0m
* Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20110614 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20110614.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20110614.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20110614.tar.bz2 --kernel-config=/var/tmp/gentoo.config
* ^[[1m^[[KERROR:^[[m^[[K kernel source directory "/usr/src/linux" was not found!
^[[32;01m*^[[0m -- End log... --
^[[32;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[32;01m*^[[0m errors that were reported above.
^[[32;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[32;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[32;01m*^[[0m as much information as you can in your bug report; attaching
^[[32;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[32;01m*^[[0m
^[[32;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[32;01m*^[[0m
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1465, in build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1491, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110614/.catalyst_lock'
Full build log at /tmp/catalyst-auto.15239/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec
@ 2011-05-25 1:35 catalyst
0 siblings, 0 replies; 156+ messages in thread
From: catalyst @ 2011-05-25 1:35 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.6.916
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2011 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache metadata_overlay pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Use of metadata_overlay module for portage enabled.
Envscript support enabled.
Using target: livecd-stage2
Building natively for ia64
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20110524/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20110524/
Location of the package cache is /var/tmp/catalyst/packages/default/livecd-stage2-ia64-20110524/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/livecd-stage2-ia64-20110524/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20110524/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-livecd-stage2-ia64-20110524/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110524/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /var/tmp/catalyst/tmp/default/livecd-stage1-ia64-20110524/
to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110524/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
--- Running action sequence: build_kernel
copying pre-kmerge.sh to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110524/tmp/
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110524/tmp/
Running pre-kmerge.sh in chroot /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110524/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot genkernel
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/genkernel-3.4.10.907
>>> Installing (1 of 1) sys-kernel/genkernel-3.4.10.907
* Messages for package sys-kernel/genkernel-3.4.10.907:
* Copying files to /var/cache/genkernel/src...
* Documentation is available in the genkernel manual page
* as well as the following URL:
* http://www.gentoo.org/doc/en/genkernel.xml
* This package is known to not work with reiser4. If you are running
* reiser4 and have a problem, do not file a bug. We know it does not
* work and we don't plan on fixing it since reiser4 is the one that is
* broken in this regard. Try using a sane filesystem like ext3 or
* even reiser3.
* The LUKS support has changed from versions prior to 3.4.4. Now,
* you use crypt_root=/dev/blah instead of real_root=luks:/dev/blah.
* GNU info directory index is up-to-date.
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
removing /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110524/tmp/chroot-functions.sh from the chroot
copying kmerge.sh to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110524/tmp/
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110524/tmp/
Running kmerge.sh in chroot /var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110524/
>>> Regenerating /etc/ld.so.cache...
Genkernel version 3.4.10.907 found ... continuing
emerge --quiet --nodeps --update --newuse gentoo-sources
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-2.6.37-r4 for /tmp/kerncache/gentoo/
>>> Installing (1 of 1) sys-kernel/gentoo-sources-2.6.37-r4 to /tmp/kerncache/gentoo/
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
* Messages for package sys-kernel/gentoo-sources-2.6.37-r4 merged to /tmp/kerncache/gentoo/:
* If you are upgrading from a previous kernel, you may be interested
* in the following document:
* - General upgrade guide: http://www.gentoo.org/doc/en/kernel-upgrade.xml
* GNU info directory index is up-to-date.
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
ln: failed to create symbolic link `/usr/src/linux': No such file or directory
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.4.10.907^[[0m
^[[32;01m*^[[0m Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20110524 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20110524.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20110524.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20110524.tar.bz2 --kernel-config=/var/tmp/gentoo.config
^[[31;01m*^[[0m ERROR: kernel source directory "/usr/src/linux" was not found!
^[[32;01m*^[[0m -- Grepping log... --
* Gentoo Linux Genkernel; Version 3.4.10.907^[[0m
* Running with options: --lvm --dmraid --mdadm --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20110524 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20110524.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20110524.tar.bz2 all --kerncache=/tmp/kerncache/gentoo-kerncache-20110524.tar.bz2 --kernel-config=/var/tmp/gentoo.config
* ^[[1m^[[KERROR:^[[m^[[K kernel source directory "/usr/src/linux" was not found!
^[[32;01m*^[[0m -- End log... --
^[[32;01m*^[[0m Please consult /var/log/genkernel.log for more information and any
^[[32;01m*^[[0m errors that were reported above.
^[[32;01m*^[[0m Report any genkernel bugs to bugs.gentoo.org and
^[[32;01m*^[[0m assign your bug to genkernel@gentoo.org. Please include
^[[32;01m*^[[0m as much information as you can in your bug report; attaching
^[[32;01m*^[[0m /var/log/genkernel.log so that your issue can be dealt with effectively.
^[[32;01m*^[[0m
^[[32;01m*^[[0m Please do *not* report compilation failures as genkernel bugs!
^[[32;01m*^[[0m
!!! catalyst: Runscript kernel build failed
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1465, in build_kernel
"Runscript kernel build failed",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: build aborting due to kernel build error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1491, in build_kernel
"build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/livecd-stage2-ia64-20110524/.catalyst_lock'
Full build log at /tmp/catalyst-auto.7364/log/installcd-stage2-minimal.log
^ permalink raw reply [flat|nested] 156+ messages in thread
end of thread, other threads:[~2024-02-17 18:06 UTC | newest]
Thread overview: 156+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-12-08 5:59 [gentoo-releng-autobuilds] [ia64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec catalyst
-- strict thread matches above, loose matches on Subject: below --
2024-02-17 18:06 catalyst
2024-01-26 14:08 catalyst
2023-10-09 9:23 catalyst
2023-07-05 8:11 catalyst
2022-07-20 9:04 catalyst
2022-05-16 1:44 catalyst
2022-05-15 21:59 catalyst
2022-05-11 8:21 catalyst
2022-05-04 15:30 catalyst
2022-04-20 11:31 catalyst
2022-04-13 10:37 catalyst
2022-04-06 11:11 catalyst
2022-03-30 9:50 catalyst
2022-03-23 13:18 catalyst
2022-03-16 8:56 catalyst
2022-03-09 11:00 catalyst
2022-03-02 9:38 catalyst
2022-02-23 12:07 catalyst
2022-02-16 8:27 catalyst
2022-02-09 9:41 catalyst
2022-02-02 7:34 catalyst
2022-01-26 11:29 catalyst
2022-01-24 23:33 catalyst
2022-01-23 8:35 catalyst
2022-01-22 23:28 catalyst
2020-08-17 5:59 catalyst
2020-08-16 5:46 catalyst
2020-08-15 8:25 catalyst
2020-08-14 6:17 catalyst
2020-08-12 5:43 catalyst
2020-08-11 12:52 catalyst
2020-06-29 5:03 catalyst
2020-06-28 5:35 catalyst
2020-06-27 5:36 catalyst
2020-06-26 5:08 catalyst
2020-06-25 4:52 catalyst
2020-06-24 5:48 catalyst
2020-05-18 6:14 catalyst
2020-05-17 5:50 catalyst
2020-05-16 7:39 catalyst
2020-02-06 6:38 catalyst
2020-02-05 6:22 catalyst
2020-02-04 6:07 catalyst
2020-02-03 6:16 catalyst
2020-02-02 6:53 catalyst
2020-02-01 6:22 catalyst
2020-01-31 6:12 catalyst
2020-01-30 6:31 catalyst
2020-01-29 6:42 catalyst
2020-01-28 6:33 catalyst
2020-01-27 6:30 catalyst
2020-01-26 6:32 catalyst
2020-01-25 6:12 catalyst
2020-01-24 6:14 catalyst
2020-01-23 6:53 catalyst
2020-01-22 6:41 catalyst
2020-01-21 7:16 catalyst
2020-01-20 6:28 catalyst
2020-01-19 6:51 catalyst
2020-01-18 6:42 catalyst
2020-01-17 6:50 catalyst
2020-01-16 7:05 catalyst
2020-01-15 6:41 catalyst
2020-01-14 6:36 catalyst
2020-01-11 6:29 catalyst
2020-01-10 6:33 catalyst
2020-01-09 6:46 catalyst
2020-01-08 6:38 catalyst
2020-01-07 6:10 catalyst
2020-01-06 6:36 catalyst
2020-01-05 6:31 catalyst
2020-01-04 6:50 catalyst
2020-01-03 6:52 catalyst
2020-01-02 6:42 catalyst
2020-01-01 6:34 catalyst
2019-12-31 7:11 catalyst
2019-12-30 6:22 catalyst
2019-12-29 6:14 catalyst
2019-12-28 6:19 catalyst
2019-12-27 6:29 catalyst
2019-12-26 6:49 catalyst
2019-12-25 6:09 catalyst
2019-12-24 6:23 catalyst
2019-12-23 6:56 catalyst
2019-12-22 6:33 catalyst
2019-12-21 6:38 catalyst
2019-12-20 6:51 catalyst
2019-12-19 5:59 catalyst
2019-12-18 6:01 catalyst
2019-12-17 5:57 catalyst
2019-12-16 6:20 catalyst
2019-12-15 5:59 catalyst
2019-12-14 6:08 catalyst
2019-12-13 7:19 catalyst
2019-12-12 6:01 catalyst
2019-12-11 6:31 catalyst
2019-12-10 6:49 catalyst
2019-12-09 6:01 catalyst
2019-12-07 6:01 catalyst
2019-12-06 6:11 catalyst
2019-12-05 6:59 catalyst
2019-12-04 6:38 catalyst
2019-12-03 22:15 catalyst
2019-05-24 20:15 catalyst
2018-06-27 17:57 catalyst
2018-06-26 17:52 catalyst
2018-06-25 18:22 catalyst
2018-06-24 18:18 catalyst
2018-06-22 17:50 catalyst
2018-06-21 21:48 catalyst
2018-06-19 18:28 catalyst
2018-06-18 17:28 catalyst
2014-06-24 13:11 catalyst
2014-06-17 12:37 catalyst
2014-06-10 13:08 catalyst
2014-06-03 13:00 catalyst
2014-05-27 12:31 catalyst
2014-05-20 14:42 catalyst
2014-05-13 12:32 catalyst
2014-05-06 12:58 catalyst
2014-04-29 12:30 catalyst
2014-04-22 12:59 catalyst
2014-04-15 12:29 catalyst
2014-04-08 23:36 catalyst
2014-02-18 16:47 catalyst
2013-12-26 11:34 catalyst
2013-12-11 20:59 catalyst
2013-12-04 21:15 catalyst
2013-11-27 20:50 catalyst
2013-11-20 21:07 catalyst
2013-11-13 21:10 catalyst
2013-10-30 21:11 catalyst
2013-10-23 21:28 catalyst
2013-10-16 21:12 catalyst
2013-09-18 21:50 catalyst
2013-09-11 21:42 catalyst
2013-09-04 21:34 catalyst
2013-06-19 10:50 catalyst
2012-07-25 6:33 catalyst
2012-06-27 4:03 catalyst
2012-06-13 4:33 catalyst
2012-06-06 4:50 catalyst
2012-05-30 4:52 catalyst
2012-05-23 4:50 catalyst
2012-05-16 4:59 catalyst
2012-02-15 3:58 catalyst
2011-10-05 2:26 catalyst
2011-09-28 2:24 catalyst
2011-09-14 3:05 catalyst
2011-09-07 3:05 catalyst
2011-08-31 3:07 catalyst
2011-08-24 2:30 catalyst
2011-07-06 1:40 catalyst
2011-06-15 1:37 catalyst
2011-05-25 1:35 catalyst
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox