* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2019-09-26 3:12 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2019-09-26 3:12 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage1.spec
26 Sep 2019 03:12:00 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
26 Sep 2019 03:12:00 UTC: NOTICE : conf_values[options] = {'snapcache', 'seedcache', 'clear-autoresume', 'pkgcache', 'autoresume', 'kerncache', 'bindist'}
26 Sep 2019 03:12:00 UTC: NOTICE : Processing spec file: stage1.spec
26 Sep 2019 03:12:00 UTC: NOTICE : Using target: stage1
26 Sep 2019 03:12:00 UTC: NOTICE : Source file specification matching setting is: strict
26 Sep 2019 03:12:00 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
26 Sep 2019 03:12:02 UTC: NOTICE : Source path set to /var/tmp/catalyst/builds/default/stage3-ia64-latest.tar.bz2
26 Sep 2019 03:12:02 UTC: NOTICE : stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-ia64-20190926T031004Z/tmp/stage1root
26 Sep 2019 03:12:02 UTC: ERROR : CatalystError: Cannot locate specified distdir: /var/cache/distfiles
Command exited with non-zero status 2
1.98user 0.04system 0:02.05elapsed 98%CPU (0avgtext+0avgdata 23232maxresident)k
0inputs+0outputs (0major+4675minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190926T031004Z.ZS6m7J/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2020-08-13 3:35 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2020-08-13 3:35 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
13 Aug 2020 03:32:05 UTC: NOTICE : --- Running action sequence: bind
13 Aug 2020 03:32:05 UTC: NOTICE : --- Running action sequence: chroot_setup
13 Aug 2020 03:32:05 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
13 Aug 2020 03:32:05 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
13 Aug 2020 03:32:05 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
13 Aug 2020 03:32:05 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/stage1-ia64-20200813T030546Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/stage1-ia64-20200813T030546Z/etc/portage/make.conf
13 Aug 2020 03:32:05 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
13 Aug 2020 03:32:06 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
13 Aug 2020 03:32:06 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
Running chroot.sh in chroot:
chroot /home/catalyst/tmp/default/stage1-ia64-20200813T030546Z /tmp/chroot.sh
>>> Regenerating /etc/ld.so.cache...
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep --newuse @world
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) app-editors/nano-5.1::gentoo
>>> Emerging (2 of 2) sys-apps/hwids-20200813::gentoo
>>> Installing (2 of 2) sys-apps/hwids-20200813::gentoo
>>> Installing (1 of 2) app-editors/nano-5.1::gentoo
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot --nodeps sys-apps/baselayout
>>> Emerging binary (1 of 1) sys-apps/baselayout-2.7::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.7::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.7 merged to /tmp/stage1root/:
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot app-arch/bzip2 app-arch/gzip app-arch/xz-utils app-arch/tar app-shells/bash:0 net-misc/rsync net-misc/wget sys-devel/autoconf sys-devel/automake sys-devel/libtool sys-apps/baselayout sys-apps/makedev sys-apps/coreutils sys-apps/diffutils sys-apps/file sys-apps/findutils sys-apps/gawk sys-apps/grep sys-apps/less sys-apps/net-tools sys-apps/portage sys-apps/sed sys-apps/shadow sys-devel/binutils sys-devel/bison sys-devel/flex sys-devel/gcc sys-devel/gettext sys-devel/gnuconfig sys-devel/make sys-devel/patch virtual/editor virtual/libc virtual/os-headers virtual/pkgconfig sys-apps/which
[binary N ] sys-libs/zlib-1.2.11-r2 to /tmp/stage1root/
[binary N ] sys-libs/ncurses-6.2-r1 to /tmp/stage1root/
[binary N ] dev-libs/gmp-6.2.0-r1 to /tmp/stage1root/
[binary N ] sys-apps/gentoo-functions-0.13 to /tmp/stage1root/
[binary N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[binary N ] app-arch/bzip2-1.0.8-r1 to /tmp/stage1root/
[binary N ] app-arch/xz-utils-5.2.5 to /tmp/stage1root/
[binary N ] sys-devel/gnuconfig-20200621 to /tmp/stage1root/
[binary N ] app-misc/c_rehash-1.7-r1 to /tmp/stage1root/
[binary N ] app-arch/tar-1.32 to /tmp/stage1root/
[binary N ] sys-apps/coreutils-8.32-r1 to /tmp/stage1root/
[binary N ] sys-apps/file-5.39-r2 to /tmp/stage1root/
[binary N ] sys-apps/sed-4.8 to /tmp/stage1root/
[binary N ] sys-kernel/linux-headers-5.8 to /tmp/stage1root/
[binary N ] sys-libs/timezone-data-2020a to /tmp/stage1root/
[binary N ] dev-libs/libunistring-0.9.10 to /tmp/stage1root/
[binary N ] app-misc/editor-wrapper-4-r1 to /tmp/stage1root/
[binary N ] sys-apps/debianutils-4.11 to /tmp/stage1root/
[binary N ] dev-libs/popt-1.18 to /tmp/stage1root/
[binary N ] app-arch/gzip-1.10 to /tmp/stage1root/
[binary R ] sys-apps/baselayout-2.7 to /tmp/stage1root/
[binary N ] sys-apps/diffutils-3.7-r1 to /tmp/stage1root/
[binary N ] sys-apps/findutils-4.7.0 to /tmp/stage1root/
[binary N ] sys-apps/net-tools-1.60_p20180626073013 to /tmp/stage1root/
[binary N ] sys-devel/make-4.3 to /tmp/stage1root/
[binary N ] sys-devel/patch-2.7.6-r4 to /tmp/stage1root/
[binary N ] sys-apps/which-2.21 to /tmp/stage1root/
[binary N ] sys-devel/m4-1.4.18-r1 to /tmp/stage1root/
[binary N ] dev-libs/expat-2.2.9 to /tmp/stage1root/
[binary N ] dev-lang/python-exec-2.4.6-r1 to /tmp/stage1root/
[binary N ] virtual/libintl-0-r2 to /tmp/stage1root/
[binary N ] sys-apps/sandbox-2.20 to /tmp/stage1root/
[binary N ] app-misc/pax-utils-1.2.6 to /tmp/stage1root/
[binary N ] dev-libs/libffi-3.3-r2 to /tmp/stage1root/
[binary N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[binary N ] sys-devel/automake-wrapper-11 to /tmp/stage1root/
[binary N ] sys-devel/autoconf-wrapper-13-r1 to /tmp/stage1root/
[binary N ] app-portage/portage-utils-0.88 to /tmp/stage1root/
[binary N ] dev-util/pkgconf-1.7.3 to /tmp/stage1root/
[binary N ] sys-apps/makedev-3.23.1-r1 to /tmp/stage1root/
[binary N ] dev-libs/mpfr-4.1.0 to /tmp/stage1root/
[binary N ] net-dns/libidn2-2.3.0 to /tmp/stage1root/
[binary N ] sys-devel/gcc-config-2.3.1 to /tmp/stage1root/
[binary N ] sys-devel/binutils-config-5.3.2 to /tmp/stage1root/
[binary N ] app-misc/ca-certificates-20200601.3.53 to /tmp/stage1root/
[binary N ] sys-libs/readline-8.0_p4 to /tmp/stage1root/
[binary N ] net-misc/rsync-3.2.3 to /tmp/stage1root/
[binary N ] sys-apps/gawk-5.1.0 to /tmp/stage1root/
[binary N ] sys-apps/grep-3.4 to /tmp/stage1root/
[binary N ] sys-apps/less-563 to /tmp/stage1root/
[binary N ] virtual/os-headers-0-r2 to /tmp/stage1root/
[binary N ] dev-libs/libxml2-2.9.10 to /tmp/stage1root/
[binary N ] app-arch/zstd-1.4.5 to /tmp/stage1root/
[binary N ] app-admin/eselect-1.4.16 to /tmp/stage1root/
[binary N ] sys-devel/bison-3.7.1 to /tmp/stage1root/
[binary N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[binary N ] virtual/pkgconfig-2 to /tmp/stage1root/
[binary N ] sys-libs/glibc-2.31-r6 to /tmp/stage1root/
[binary N ] app-shells/bash-5.0_p18 to /tmp/stage1root/
[binary N ] dev-libs/mpc-1.1.0-r1 to /tmp/stage1root/
[binary N ] dev-libs/openssl-1.1.1g to /tmp/stage1root/
[ebuild N ] app-editors/nano-5.1 to /tmp/stage1root/
[binary N ] sys-devel/binutils-2.34-r2 to /tmp/stage1root/
[binary N ] app-eselect/eselect-python-20200719 to /tmp/stage1root/
[binary N ] sys-devel/gettext-0.21 to /tmp/stage1root/
[binary N ] virtual/libcrypt-1-r1 to /tmp/stage1root/
[binary N ] net-misc/wget-1.20.3-r3 to /tmp/stage1root/
[binary N ] sys-devel/gcc-10.2.0 to /tmp/stage1root/
[binary N ] virtual/editor-0-r3 to /tmp/stage1root/
[binary N ] virtual/libc-1-r1 to /tmp/stage1root/
[binary N ] sys-apps/util-linux-2.36 to /tmp/stage1root/
[binary N ] sys-apps/shadow-4.8.1-r2 to /tmp/stage1root/
[binary N ] dev-lang/perl-5.30.3-r1 to /tmp/stage1root/
[binary N ] virtual/perl-Test-Harness-3.420.0-r3 to /tmp/stage1root/
[binary N ] virtual/perl-Data-Dumper-2.174.0-r1 to /tmp/stage1root/
[binary N ] perl-core/File-Temp-0.230.900 to /tmp/stage1root/
[binary N ] virtual/perl-File-Temp-0.230.900 to /tmp/stage1root/
[binary N ] sys-devel/autoconf-2.69-r5 to /tmp/stage1root/
[binary N ] sys-devel/automake-1.16.2 to /tmp/stage1root/
[binary N ] sys-devel/libtool-2.4.6-r6 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.7.8-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-3.0.2 to /tmp/stage1root/
[binary N ] app-admin/perl-cleaner-2.28 to /tmp/stage1root/
The following USE changes are necessary to proceed:
(see "package.use" in the portage(5) man page for more details)
# required by sys-apps/portage-3.0.2::gentoo[python_targets_python3_7]
# required by app-admin/perl-cleaner-2.28::gentoo
# required by dev-lang/perl-5.30.3-r1::gentoo
# required by virtual/perl-Data-Dumper-2.174.0-r1::gentoo
>=dev-lang/python-3.7.8-r2:3.7 xml
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
* IMPORTANT: 3 news items need reading for repository 'gentoo'.
* Use eselect news read to view new items.
13 Aug 2020 03:35:16 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/controller.sh', 'run']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/stage1/controller.sh', 'run']) exited 1
13 Aug 2020 03:35:16 UTC: ERROR : CatalystError: Stage build aborting due to error.
ERROR:catalyst:CatalystError: Stage build aborting due to error.
13 Aug 2020 03:35:16 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1250, in run_local
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1352, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1259, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
ERROR:catalyst:Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1250, in run_local
env=self.env)
File "/usr/lib/python3.7/site-packages/catalyst/support.py", line 60, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1352, in run
getattr(self, x)()
File "/usr/lib/python3.7/site-packages/catalyst/base/stagebase.py", line 1259, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
13 Aug 2020 03:35:16 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
13 Aug 2020 03:35:16 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200813T030546Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200813T030546Z/tmp/kerncache is not a mount point. Skipping
13 Aug 2020 03:35:16 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200813T030546Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200813T030546Z/var/tmp/portage is not a mount point. Skipping
13 Aug 2020 03:35:16 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200813T030546Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200813T030546Z/var/cache/binpkgs is not a mount point. Skipping
13 Aug 2020 03:35:16 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200813T030546Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200813T030546Z/var/cache/distfiles is not a mount point. Skipping
13 Aug 2020 03:35:16 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200813T030546Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200813T030546Z/var/db/repos/gentoo is not a mount point. Skipping
13 Aug 2020 03:35:16 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200813T030546Z/run is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200813T030546Z/run is not a mount point. Skipping
13 Aug 2020 03:35:16 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200813T030546Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200813T030546Z/dev/shm does not exist. Skipping
13 Aug 2020 03:35:16 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200813T030546Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200813T030546Z/dev/pts does not exist. Skipping
13 Aug 2020 03:35:16 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200813T030546Z/dev is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200813T030546Z/dev is not a mount point. Skipping
13 Aug 2020 03:35:16 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200813T030546Z/proc is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200813T030546Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
234.86user 34.60system 3:31.85elapsed 127%CPU (0avgtext+0avgdata 219824maxresident)k
0inputs+0outputs (1major+3855480minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200813T030546Z.y23L35/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2020-05-15 4:08 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2020-05-15 4:08 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20200515T034804Z.WRVSga/specs/stage1.spec
15 May 2020 03:50:23 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
15 May 2020 03:50:23 UTC: NOTICE : conf_values[options] = {'autoresume', 'bindist', 'snapcache', 'kerncache', 'pkgcache', 'clear-autoresume'}
15 May 2020 03:50:23 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20200515T034804Z.WRVSga/specs/stage1.spec
15 May 2020 03:50:23 UTC: NOTICE : Using target: stage1
15 May 2020 03:50:23 UTC: NOTICE : Source file specification matching setting is: strict
15 May 2020 03:50:23 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
15 May 2020 03:50:24 UTC: NOTICE : Source path set to /home/catalyst/builds/default/stage3-ia64-latest.tar.xz
15 May 2020 03:50:24 UTC: NOTICE : stage1 stage path is /home/catalyst/tmp/default/stage1-ia64-20200515T034804Z/tmp/stage1root
15 May 2020 03:50:24 UTC: NOTICE : Removing AutoResume Points ...
15 May 2020 03:50:24 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-stage1-ia64-20200515T034804Z
15 May 2020 03:50:24 UTC: NOTICE : --- Running action sequence: unpack
15 May 2020 03:50:24 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
15 May 2020 03:50:24 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
15 May 2020 03:50:24 UTC: NOTICE : Removing AutoResume Points ...
15 May 2020 03:50:24 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-stage1-ia64-20200515T034804Z
15 May 2020 03:50:24 UTC: NOTICE : Clearing the chroot path ...
15 May 2020 03:50:24 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/stage1-ia64-20200515T034804Z
15 May 2020 03:50:24 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/stage3-ia64-latest.tar.xz
15 May 2020 03:50:24 UTC: NOTICE : to /home/catalyst/tmp/default/stage1-ia64-20200515T034804Z (this may take some time) ..
15 May 2020 03:50:48 UTC: NOTICE : --- Running action sequence: unpack_snapshot
15 May 2020 03:50:48 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
15 May 2020 03:53:22 UTC: NOTICE : --- Running action sequence: setup_confdir
15 May 2020 03:53:22 UTC: NOTICE : --- Running action sequence: portage_overlay
15 May 2020 03:53:22 UTC: NOTICE : --- Running action sequence: base_dirs
15 May 2020 03:53:22 UTC: NOTICE : --- Running action sequence: bind
15 May 2020 03:53:22 UTC: NOTICE : --- Running action sequence: chroot_setup
15 May 2020 03:53:22 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
15 May 2020 03:53:22 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
15 May 2020 03:53:22 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
15 May 2020 03:53:22 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/stage1-ia64-20200515T034804Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/stage1-ia64-20200515T034804Z/etc/portage/make.conf
15 May 2020 03:53:22 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
15 May 2020 03:53:22 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
15 May 2020 03:53:22 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
Running chroot.sh in chroot:
chroot /home/catalyst/tmp/default/stage1-ia64-20200515T034804Z /tmp/chroot.sh
>>> Regenerating /etc/ld.so.cache...
Adding USE="${USE} build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-apps/portage-2.3.99-r2
* Determining the location of the kernel source code
* Unable to find kernel sources at /usr/src/linux
* Please make sure that /usr/src/linux points at your running kernel,
* (or the kernel you wish to build against).
* Alternatively, set the KERNEL_DIR environment variable to the kernel sources location
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Checking for suitable kernel configuration options...
[ ok ]
>>> Emerging (1 of 1) sys-apps/portage-2.3.99-r2::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.99-r2::gentoo
* Messages for package sys-apps/portage-2.3.99-r2:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-apps/portage-2.3.99-r2:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep --newuse @world
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-libs/glibc-2.31-r3
* Checking general environment sanity.
cc -O2 -pipe -Wl,-O1 -Wl,--as-needed glibc-test.c -o glibc-test
* Checking gcc for __thread support ...
[ ok ]
* Checking running kernel version (4.19.86-gentoo >= 3.2.0) ...
[ ok ]
* Checking linux-headers version (5.6.0 >= 3.2.0) ...
[ ok ]
>>> Running pre-merge checks for sys-apps/portage-2.3.99-r2
* Determining the location of the kernel source code
* Unable to find kernel sources at /usr/src/linux
* Please make sure that /usr/src/linux points at your running kernel,
* (or the kernel you wish to build against).
* Alternatively, set the KERNEL_DIR environment variable to the kernel sources location
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Checking for suitable kernel configuration options...
[ ok ]
>>> Emerging (1 of 5) sys-libs/glibc-2.31-r3::gentoo
>>> Failed to emerge sys-libs/glibc-2.31-r3
* Messages for package sys-apps/portage-2.3.99-r2:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-libs/glibc-2.31-r3:
* Applying Gentoo Glibc Patchset 2.31-5
* ERROR: sys-libs/glibc-2.31-r3::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-libs/glibc-2.31-r3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/glibc-2.31-r3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.31-r3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.31-r3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-libs/glibc-2.31-r3/work/glibc-2.31'
* S: '/var/tmp/portage/sys-libs/glibc-2.31-r3/work/glibc-2.31'
15 May 2020 04:08:54 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/controller.sh', 'run']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/stage1/controller.sh', 'run']) exited 1
15 May 2020 04:08:54 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200515T034804Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200515T034804Z/var/tmp/portage is not a mount point. Skipping
15 May 2020 04:08:54 UTC: ERROR : CatalystError: Stage build aborting due to error.
ERROR:catalyst:CatalystError: Stage build aborting due to error.
15 May 2020 04:08:54 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1474, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1378, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
ERROR:catalyst:Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1474, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1378, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
15 May 2020 04:08:54 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
15 May 2020 04:08:54 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200515T034804Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200515T034804Z/tmp/kerncache is not a mount point. Skipping
15 May 2020 04:08:54 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200515T034804Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200515T034804Z/var/cache/binpkgs is not a mount point. Skipping
15 May 2020 04:08:54 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200515T034804Z/tmp/stage1root/proc is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200515T034804Z/tmp/stage1root/proc is not a mount point. Skipping
15 May 2020 04:08:54 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200515T034804Z/run is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200515T034804Z/run is not a mount point. Skipping
15 May 2020 04:08:54 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200515T034804Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200515T034804Z/dev/shm does not exist. Skipping
15 May 2020 04:08:54 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200515T034804Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200515T034804Z/dev/pts does not exist. Skipping
15 May 2020 04:08:54 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200515T034804Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200515T034804Z/var/tmp/portage is not a mount point. Skipping
15 May 2020 04:08:54 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200515T034804Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200515T034804Z/var/cache/distfiles is not a mount point. Skipping
15 May 2020 04:08:54 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200515T034804Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200515T034804Z/var/db/repos/gentoo is not a mount point. Skipping
15 May 2020 04:08:54 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200515T034804Z/dev is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200515T034804Z/dev is not a mount point. Skipping
15 May 2020 04:08:54 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200515T034804Z/proc is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200515T034804Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
2045.39user 420.49system 18:31.55elapsed 221%CPU (0avgtext+0avgdata 217184maxresident)k
0inputs+0outputs (0major+34925787minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200515T034804Z.WRVSga/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2020-05-14 3:46 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2020-05-14 3:46 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20200514T032604Z.ffUe7E/specs/stage1.spec
14 May 2020 03:28:17 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
14 May 2020 03:28:17 UTC: NOTICE : conf_values[options] = {'snapcache', 'kerncache', 'bindist', 'clear-autoresume', 'autoresume', 'pkgcache'}
14 May 2020 03:28:17 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20200514T032604Z.ffUe7E/specs/stage1.spec
14 May 2020 03:28:17 UTC: NOTICE : Using target: stage1
14 May 2020 03:28:17 UTC: NOTICE : Source file specification matching setting is: strict
14 May 2020 03:28:17 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
14 May 2020 03:28:18 UTC: NOTICE : Source path set to /home/catalyst/builds/default/stage3-ia64-latest.tar.xz
14 May 2020 03:28:18 UTC: NOTICE : stage1 stage path is /home/catalyst/tmp/default/stage1-ia64-20200514T032604Z/tmp/stage1root
14 May 2020 03:28:18 UTC: NOTICE : Removing AutoResume Points ...
14 May 2020 03:28:18 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-stage1-ia64-20200514T032604Z
14 May 2020 03:28:18 UTC: NOTICE : --- Running action sequence: unpack
14 May 2020 03:28:18 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
14 May 2020 03:28:18 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
14 May 2020 03:28:18 UTC: NOTICE : Removing AutoResume Points ...
14 May 2020 03:28:18 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-stage1-ia64-20200514T032604Z
14 May 2020 03:28:18 UTC: NOTICE : Clearing the chroot path ...
14 May 2020 03:28:18 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/stage1-ia64-20200514T032604Z
14 May 2020 03:28:18 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/stage3-ia64-latest.tar.xz
14 May 2020 03:28:18 UTC: NOTICE : to /home/catalyst/tmp/default/stage1-ia64-20200514T032604Z (this may take some time) ..
14 May 2020 03:28:42 UTC: NOTICE : --- Running action sequence: unpack_snapshot
14 May 2020 03:28:42 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
14 May 2020 03:31:14 UTC: NOTICE : --- Running action sequence: setup_confdir
14 May 2020 03:31:14 UTC: NOTICE : --- Running action sequence: portage_overlay
14 May 2020 03:31:14 UTC: NOTICE : --- Running action sequence: base_dirs
14 May 2020 03:31:14 UTC: NOTICE : --- Running action sequence: bind
14 May 2020 03:31:14 UTC: NOTICE : --- Running action sequence: chroot_setup
14 May 2020 03:31:14 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
14 May 2020 03:31:14 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
14 May 2020 03:31:14 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
14 May 2020 03:31:14 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/stage1-ia64-20200514T032604Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/stage1-ia64-20200514T032604Z/etc/portage/make.conf
14 May 2020 03:31:14 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
14 May 2020 03:31:14 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
14 May 2020 03:31:14 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
Running chroot.sh in chroot:
chroot /home/catalyst/tmp/default/stage1-ia64-20200514T032604Z /tmp/chroot.sh
>>> Regenerating /etc/ld.so.cache...
Adding USE="${USE} build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-apps/portage-2.3.99-r2
* Determining the location of the kernel source code
* Unable to find kernel sources at /usr/src/linux
* Please make sure that /usr/src/linux points at your running kernel,
* (or the kernel you wish to build against).
* Alternatively, set the KERNEL_DIR environment variable to the kernel sources location
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Checking for suitable kernel configuration options...
[ ok ]
>>> Emerging (1 of 1) sys-apps/portage-2.3.99-r2::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.99-r2::gentoo
* Messages for package sys-apps/portage-2.3.99-r2:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-apps/portage-2.3.99-r2:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep --newuse @world
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-libs/glibc-2.31-r3
* Checking general environment sanity.
cc -O2 -pipe -Wl,-O1 -Wl,--as-needed glibc-test.c -o glibc-test
* Checking gcc for __thread support ...
[ ok ]
* Checking running kernel version (4.19.86-gentoo >= 3.2.0) ...
[ ok ]
* Checking linux-headers version (5.6.0 >= 3.2.0) ...
[ ok ]
>>> Running pre-merge checks for sys-apps/portage-2.3.99-r2
* Determining the location of the kernel source code
* Unable to find kernel sources at /usr/src/linux
* Please make sure that /usr/src/linux points at your running kernel,
* (or the kernel you wish to build against).
* Alternatively, set the KERNEL_DIR environment variable to the kernel sources location
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Checking for suitable kernel configuration options...
[ ok ]
>>> Emerging (1 of 4) sys-libs/glibc-2.31-r3::gentoo
>>> Failed to emerge sys-libs/glibc-2.31-r3
* Messages for package sys-apps/portage-2.3.99-r2:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-libs/glibc-2.31-r3:
* Applying Gentoo Glibc Patchset 2.31-5
* ERROR: sys-libs/glibc-2.31-r3::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-libs/glibc-2.31-r3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/glibc-2.31-r3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.31-r3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.31-r3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-libs/glibc-2.31-r3/work/glibc-2.31'
* S: '/var/tmp/portage/sys-libs/glibc-2.31-r3/work/glibc-2.31'
14 May 2020 03:46:54 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/controller.sh', 'run']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/stage1/controller.sh', 'run']) exited 1
14 May 2020 03:46:55 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200514T032604Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200514T032604Z/var/tmp/portage is not a mount point. Skipping
14 May 2020 03:46:55 UTC: ERROR : CatalystError: Stage build aborting due to error.
ERROR:catalyst:CatalystError: Stage build aborting due to error.
14 May 2020 03:46:55 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1474, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1378, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
ERROR:catalyst:Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1474, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1378, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
14 May 2020 03:46:55 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
14 May 2020 03:46:55 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200514T032604Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200514T032604Z/tmp/kerncache is not a mount point. Skipping
14 May 2020 03:46:55 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200514T032604Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200514T032604Z/var/cache/binpkgs is not a mount point. Skipping
14 May 2020 03:46:55 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200514T032604Z/tmp/stage1root/proc is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200514T032604Z/tmp/stage1root/proc is not a mount point. Skipping
14 May 2020 03:46:55 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200514T032604Z/run is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200514T032604Z/run is not a mount point. Skipping
14 May 2020 03:46:55 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200514T032604Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200514T032604Z/dev/shm does not exist. Skipping
14 May 2020 03:46:55 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200514T032604Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200514T032604Z/dev/pts does not exist. Skipping
14 May 2020 03:46:55 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200514T032604Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200514T032604Z/var/tmp/portage is not a mount point. Skipping
14 May 2020 03:46:55 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200514T032604Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200514T032604Z/var/cache/distfiles is not a mount point. Skipping
14 May 2020 03:46:55 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200514T032604Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200514T032604Z/var/db/repos/gentoo is not a mount point. Skipping
14 May 2020 03:46:55 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200514T032604Z/dev is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200514T032604Z/dev is not a mount point. Skipping
14 May 2020 03:46:55 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200514T032604Z/proc is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200514T032604Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
2047.33user 420.12system 18:38.39elapsed 220%CPU (0avgtext+0avgdata 217184maxresident)k
0inputs+0outputs (0major+34926001minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200514T032604Z.ffUe7E/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2020-05-13 3:26 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2020-05-13 3:26 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f /tmp/catalyst-auto.20200513T030604Z.TAy2L3/specs/stage1.spec
13 May 2020 03:08:03 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
13 May 2020 03:08:03 UTC: NOTICE : conf_values[options] = {'kerncache', 'clear-autoresume', 'snapcache', 'pkgcache', 'bindist', 'autoresume'}
13 May 2020 03:08:03 UTC: NOTICE : Processing spec file: /tmp/catalyst-auto.20200513T030604Z.TAy2L3/specs/stage1.spec
13 May 2020 03:08:03 UTC: NOTICE : Using target: stage1
13 May 2020 03:08:03 UTC: NOTICE : Source file specification matching setting is: strict
13 May 2020 03:08:03 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
13 May 2020 03:08:05 UTC: NOTICE : Source path set to /home/catalyst/builds/default/stage3-ia64-latest.tar.xz
13 May 2020 03:08:05 UTC: NOTICE : stage1 stage path is /home/catalyst/tmp/default/stage1-ia64-20200513T030604Z/tmp/stage1root
13 May 2020 03:08:05 UTC: NOTICE : Removing AutoResume Points ...
13 May 2020 03:08:05 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-stage1-ia64-20200513T030604Z
13 May 2020 03:08:05 UTC: NOTICE : --- Running action sequence: unpack
13 May 2020 03:08:05 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
13 May 2020 03:08:05 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
13 May 2020 03:08:05 UTC: NOTICE : Removing AutoResume Points ...
13 May 2020 03:08:05 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-stage1-ia64-20200513T030604Z
13 May 2020 03:08:05 UTC: NOTICE : Clearing the chroot path ...
13 May 2020 03:08:05 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/stage1-ia64-20200513T030604Z
13 May 2020 03:08:05 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/stage3-ia64-latest.tar.xz
13 May 2020 03:08:05 UTC: NOTICE : to /home/catalyst/tmp/default/stage1-ia64-20200513T030604Z (this may take some time) ..
13 May 2020 03:08:39 UTC: NOTICE : --- Running action sequence: unpack_snapshot
13 May 2020 03:08:39 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
13 May 2020 03:11:09 UTC: NOTICE : --- Running action sequence: setup_confdir
13 May 2020 03:11:09 UTC: NOTICE : --- Running action sequence: portage_overlay
13 May 2020 03:11:09 UTC: NOTICE : --- Running action sequence: base_dirs
13 May 2020 03:11:09 UTC: NOTICE : --- Running action sequence: bind
13 May 2020 03:11:09 UTC: NOTICE : --- Running action sequence: chroot_setup
13 May 2020 03:11:09 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
13 May 2020 03:11:09 UTC: WARNING : env variables in catalystrc may cause catastrophic failure.
WARNING:catalyst:env variables in catalystrc may cause catastrophic failure.
13 May 2020 03:11:09 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
13 May 2020 03:11:09 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/stage1-ia64-20200513T030604Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /home/catalyst/tmp/default/stage1-ia64-20200513T030604Z/etc/portage/make.conf
13 May 2020 03:11:09 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
13 May 2020 03:11:09 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
13 May 2020 03:11:09 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
Running chroot.sh in chroot:
chroot /home/catalyst/tmp/default/stage1-ia64-20200513T030604Z /tmp/chroot.sh
>>> Regenerating /etc/ld.so.cache...
Adding USE="${USE} build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-apps/portage-2.3.99-r2
* Determining the location of the kernel source code
* Unable to find kernel sources at /usr/src/linux
* Please make sure that /usr/src/linux points at your running kernel,
* (or the kernel you wish to build against).
* Alternatively, set the KERNEL_DIR environment variable to the kernel sources location
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Checking for suitable kernel configuration options...
[ ok ]
>>> Emerging (1 of 1) sys-apps/portage-2.3.99-r2::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.99-r2::gentoo
* Messages for package sys-apps/portage-2.3.99-r2:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-apps/portage-2.3.99-r2:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep --newuse @world
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-libs/glibc-2.31-r3
* Checking general environment sanity.
cc -O2 -pipe -Wl,-O1 -Wl,--as-needed glibc-test.c -o glibc-test
* Checking gcc for __thread support ...
[ ok ]
* Checking running kernel version (4.19.86-gentoo >= 3.2.0) ...
[ ok ]
* Checking linux-headers version (5.6.0 >= 3.2.0) ...
[ ok ]
>>> Running pre-merge checks for sys-apps/portage-2.3.99-r2
* Determining the location of the kernel source code
* Unable to find kernel sources at /usr/src/linux
* Please make sure that /usr/src/linux points at your running kernel,
* (or the kernel you wish to build against).
* Alternatively, set the KERNEL_DIR environment variable to the kernel sources location
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Checking for suitable kernel configuration options...
[ ok ]
>>> Emerging (1 of 3) sys-libs/glibc-2.31-r3::gentoo
>>> Failed to emerge sys-libs/glibc-2.31-r3
* Messages for package sys-apps/portage-2.3.99-r2:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-libs/glibc-2.31-r3:
* Applying Gentoo Glibc Patchset 2.31-5
* ERROR: sys-libs/glibc-2.31-r3::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-libs/glibc-2.31-r3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/glibc-2.31-r3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.31-r3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.31-r3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-libs/glibc-2.31-r3/work/glibc-2.31'
* S: '/var/tmp/portage/sys-libs/glibc-2.31-r3/work/glibc-2.31'
13 May 2020 03:26:49 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/controller.sh', 'run']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/stage1/controller.sh', 'run']) exited 1
13 May 2020 03:26:49 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200513T030604Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200513T030604Z/var/tmp/portage is not a mount point. Skipping
13 May 2020 03:26:49 UTC: ERROR : CatalystError: Stage build aborting due to error.
ERROR:catalyst:CatalystError: Stage build aborting due to error.
13 May 2020 03:26:49 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1474, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1378, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
ERROR:catalyst:Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1474, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1378, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
13 May 2020 03:26:49 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
13 May 2020 03:26:49 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200513T030604Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200513T030604Z/tmp/kerncache is not a mount point. Skipping
13 May 2020 03:26:49 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200513T030604Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200513T030604Z/var/cache/binpkgs is not a mount point. Skipping
13 May 2020 03:26:49 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200513T030604Z/tmp/stage1root/proc is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200513T030604Z/tmp/stage1root/proc is not a mount point. Skipping
13 May 2020 03:26:49 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200513T030604Z/run is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200513T030604Z/run is not a mount point. Skipping
13 May 2020 03:26:49 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200513T030604Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200513T030604Z/dev/shm does not exist. Skipping
13 May 2020 03:26:49 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200513T030604Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200513T030604Z/dev/pts does not exist. Skipping
13 May 2020 03:26:49 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200513T030604Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200513T030604Z/var/tmp/portage is not a mount point. Skipping
13 May 2020 03:26:49 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200513T030604Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200513T030604Z/var/cache/distfiles is not a mount point. Skipping
13 May 2020 03:26:49 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200513T030604Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200513T030604Z/var/db/repos/gentoo is not a mount point. Skipping
13 May 2020 03:26:49 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200513T030604Z/dev is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200513T030604Z/dev is not a mount point. Skipping
13 May 2020 03:26:49 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200513T030604Z/proc is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200513T030604Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
2046.25user 422.14system 18:46.05elapsed 219%CPU (0avgtext+0avgdata 217184maxresident)k
0inputs+0outputs (1major+34928047minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200513T030604Z.TAy2L3/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2020-04-27 3:43 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2020-04-27 3:43 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Installing (12 of 82) sys-apps/file-5.38-r1::gentoo to /tmp/stage1root/
>>> Installing (13 of 82) sys-apps/sed-4.8::gentoo to /tmp/stage1root/
>>> Installing (14 of 82) sys-kernel/linux-headers-5.6::gentoo to /tmp/stage1root/
>>> Installing (15 of 82) sys-libs/timezone-data-2019c::gentoo to /tmp/stage1root/
>>> Installing (16 of 82) dev-libs/libunistring-0.9.10::gentoo to /tmp/stage1root/
>>> Installing (17 of 82) app-misc/editor-wrapper-4-r1::gentoo to /tmp/stage1root/
>>> Installing (18 of 82) sys-apps/debianutils-4.9.1::gentoo to /tmp/stage1root/
>>> Installing (19 of 82) dev-libs/popt-1.16-r2::gentoo to /tmp/stage1root/
>>> Installing (20 of 82) app-arch/gzip-1.10::gentoo to /tmp/stage1root/
>>> Installing (21 of 82) sys-apps/baselayout-2.7::gentoo to /tmp/stage1root/
>>> Installing (22 of 82) sys-apps/diffutils-3.7::gentoo to /tmp/stage1root/
>>> Installing (23 of 82) sys-apps/findutils-4.7.0::gentoo to /tmp/stage1root/
>>> Installing (24 of 82) sys-apps/net-tools-1.60_p20180626073013::gentoo to /tmp/stage1root/
>>> Installing (25 of 82) sys-devel/make-4.3::gentoo to /tmp/stage1root/
>>> Installing (26 of 82) sys-devel/patch-2.7.6-r4::gentoo to /tmp/stage1root/
>>> Installing (27 of 82) sys-apps/which-2.21::gentoo to /tmp/stage1root/
>>> Emerging binary (44 of 82) dev-libs/mpfr-4.0.2::gentoo for /tmp/stage1root/
>>> Emerging binary (45 of 82) net-dns/libidn2-2.3.0::gentoo for /tmp/stage1root/
>>> Emerging binary (46 of 82) sys-devel/gcc-config-2.2.1::gentoo for /tmp/stage1root/
>>> Emerging binary (47 of 82) sys-devel/binutils-config-5.2::gentoo for /tmp/stage1root/
>>> Emerging binary (48 of 82) app-misc/ca-certificates-20190110.3.43::gentoo for /tmp/stage1root/
>>> Emerging binary (49 of 82) sys-libs/readline-8.0_p4::gentoo for /tmp/stage1root/
>>> Emerging binary (50 of 82) app-editors/nano-4.9.2::gentoo for /tmp/stage1root/
>>> Emerging binary (51 of 82) net-misc/rsync-3.1.3::gentoo for /tmp/stage1root/
>>> Emerging binary (52 of 82) sys-apps/gawk-5.1.0::gentoo for /tmp/stage1root/
>>> Emerging binary (53 of 82) sys-apps/grep-3.4::gentoo for /tmp/stage1root/
>>> Emerging binary (54 of 82) sys-apps/less-557::gentoo for /tmp/stage1root/
>>> Emerging binary (55 of 82) virtual/os-headers-0-r2::gentoo for /tmp/stage1root/
>>> Emerging binary (56 of 82) dev-libs/libxml2-2.9.9-r3::gentoo for /tmp/stage1root/
>>> Emerging binary (57 of 82) app-admin/eselect-1.4.16::gentoo for /tmp/stage1root/
>>> Installing (56 of 82) dev-libs/libxml2-2.9.9-r3::gentoo to /tmp/stage1root/
>>> Installing (57 of 82) app-admin/eselect-1.4.16::gentoo to /tmp/stage1root/
>>> Emerging binary (58 of 82) app-eselect/eselect-python-20190417::gentoo for /tmp/stage1root/
>>> Emerging binary (59 of 82) sys-devel/gettext-0.20.2::gentoo for /tmp/stage1root/
>>> Installing (58 of 82) app-eselect/eselect-python-20190417::gentoo to /tmp/stage1root/
>>> Installing (59 of 82) sys-devel/gettext-0.20.2::gentoo to /tmp/stage1root/
>>> Installing (44 of 82) dev-libs/mpfr-4.0.2::gentoo to /tmp/stage1root/
>>> Installing (45 of 82) net-dns/libidn2-2.3.0::gentoo to /tmp/stage1root/
>>> Installing (46 of 82) sys-devel/gcc-config-2.2.1::gentoo to /tmp/stage1root/
>>> Installing (47 of 82) sys-devel/binutils-config-5.2::gentoo to /tmp/stage1root/
>>> Installing (48 of 82) app-misc/ca-certificates-20190110.3.43::gentoo to /tmp/stage1root/
>>> Installing (49 of 82) sys-libs/readline-8.0_p4::gentoo to /tmp/stage1root/
>>> Installing (50 of 82) app-editors/nano-4.9.2::gentoo to /tmp/stage1root/
>>> Installing (51 of 82) net-misc/rsync-3.1.3::gentoo to /tmp/stage1root/
>>> Installing (52 of 82) sys-apps/gawk-5.1.0::gentoo to /tmp/stage1root/
>>> Installing (53 of 82) sys-apps/grep-3.4::gentoo to /tmp/stage1root/
>>> Installing (54 of 82) sys-apps/less-557::gentoo to /tmp/stage1root/
>>> Installing (55 of 82) virtual/os-headers-0-r2::gentoo to /tmp/stage1root/
>>> Emerging binary (60 of 82) sys-libs/glibc-2.31-r2::gentoo for /tmp/stage1root/
>>> Emerging (61 of 82) app-shells/bash-5.0_p17::gentoo for /tmp/stage1root/
>>> Emerging binary (62 of 82) dev-libs/mpc-1.1.0-r1::gentoo for /tmp/stage1root/
>>> Emerging binary (63 of 82) dev-libs/openssl-1.1.1g::gentoo for /tmp/stage1root/
>>> Emerging binary (64 of 82) sys-devel/binutils-2.34::gentoo for /tmp/stage1root/
>>> Emerging binary (65 of 82) virtual/editor-0-r3::gentoo for /tmp/stage1root/
>>> Installing (60 of 82) sys-libs/glibc-2.31-r2::gentoo to /tmp/stage1root/
>>> Installing (62 of 82) dev-libs/mpc-1.1.0-r1::gentoo to /tmp/stage1root/
>>> Installing (63 of 82) dev-libs/openssl-1.1.1g::gentoo to /tmp/stage1root/
>>> Installing (64 of 82) sys-devel/binutils-2.34::gentoo to /tmp/stage1root/
>>> Installing (65 of 82) virtual/editor-0-r3::gentoo to /tmp/stage1root/
>>> Installing (61 of 82) app-shells/bash-5.0_p17::gentoo to /tmp/stage1root/
>>> Emerging binary (66 of 82) virtual/libcrypt-1::gentoo for /tmp/stage1root/
>>> Installing (66 of 82) virtual/libcrypt-1::gentoo to /tmp/stage1root/
>>> Emerging binary (67 of 82) net-misc/wget-1.20.3-r3::gentoo for /tmp/stage1root/
>>> Emerging binary (68 of 82) sys-devel/gcc-9.3.0::gentoo for /tmp/stage1root/
>>> Emerging binary (69 of 82) virtual/libc-1-r1::gentoo for /tmp/stage1root/
>>> Emerging binary (70 of 82) sys-apps/util-linux-2.35.1-r1::gentoo for /tmp/stage1root/
>>> Emerging binary (71 of 82) sys-apps/shadow-4.8.1-r2::gentoo for /tmp/stage1root/
>>> Emerging binary (72 of 82) dev-lang/python-3.6.10-r2::gentoo for /tmp/stage1root/
>>> Installing (72 of 82) dev-lang/python-3.6.10-r2::gentoo to /tmp/stage1root/
>>> Installing (67 of 82) net-misc/wget-1.20.3-r3::gentoo to /tmp/stage1root/
>>> Installing (69 of 82) virtual/libc-1-r1::gentoo to /tmp/stage1root/
>>> Installing (68 of 82) sys-devel/gcc-9.3.0::gentoo to /tmp/stage1root/
>>> Installing (70 of 82) sys-apps/util-linux-2.35.1-r1::gentoo to /tmp/stage1root/
>>> Installing (71 of 82) sys-apps/shadow-4.8.1-r2::gentoo to /tmp/stage1root/
>>> Emerging binary (73 of 82) sys-apps/portage-2.3.99-r2::gentoo for /tmp/stage1root/
>>> Installing (73 of 82) sys-apps/portage-2.3.99-r2::gentoo to /tmp/stage1root/
>>> Emerging binary (74 of 82) dev-lang/perl-5.30.2::gentoo for /tmp/stage1root/
>>> Installing (74 of 82) dev-lang/perl-5.30.2::gentoo to /tmp/stage1root/
>>> Emerging binary (75 of 82) virtual/perl-Data-Dumper-2.174.0::gentoo for /tmp/stage1root/
>>> Installing (75 of 82) virtual/perl-Data-Dumper-2.174.0::gentoo to /tmp/stage1root/
>>> Emerging binary (76 of 82) app-admin/perl-cleaner-2.28::gentoo for /tmp/stage1root/
>>> Installing (76 of 82) app-admin/perl-cleaner-2.28::gentoo to /tmp/stage1root/
>>> Emerging binary (77 of 82) virtual/perl-Test-Harness-3.420.0-r2::gentoo for /tmp/stage1root/
>>> Installing (77 of 82) virtual/perl-Test-Harness-3.420.0-r2::gentoo to /tmp/stage1root/
>>> Emerging binary (78 of 82) perl-core/File-Temp-0.230.900::gentoo for /tmp/stage1root/
>>> Installing (78 of 82) perl-core/File-Temp-0.230.900::gentoo to /tmp/stage1root/
>>> Emerging binary (79 of 82) virtual/perl-File-Temp-0.230.900::gentoo for /tmp/stage1root/
>>> Installing (79 of 82) virtual/perl-File-Temp-0.230.900::gentoo to /tmp/stage1root/
>>> Emerging binary (80 of 82) sys-devel/autoconf-2.69-r5::gentoo for /tmp/stage1root/
>>> Installing (80 of 82) sys-devel/autoconf-2.69-r5::gentoo to /tmp/stage1root/
>>> Emerging binary (81 of 82) sys-devel/automake-1.16.2::gentoo for /tmp/stage1root/
>>> Installing (81 of 82) sys-devel/automake-1.16.2::gentoo to /tmp/stage1root/
>>> Emerging binary (82 of 82) sys-devel/libtool-2.4.6-r6::gentoo for /tmp/stage1root/
>>> Installing (82 of 82) sys-devel/libtool-2.4.6-r6::gentoo to /tmp/stage1root/
* Messages for package sys-apps/coreutils-8.32-r1 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-libs/timezone-data-2019c merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package dev-libs/libxml2-2.9.9-r3 merged to /tmp/stage1root/:
* Skipping XML catalog creation for stage building (bug #208887).
* Messages for package sys-devel/gcc-9.3.0 merged to /tmp/stage1root/:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package sys-apps/util-linux-2.35.1-r1 merged to /tmp/stage1root/:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* IMPORTANT: 4 news items need reading for repository 'gentoo'.
* Use eselect news read to view new items.
* Building locales in DESTDIR '/tmp/stage1root/'
* Generating 2 locales (this might take a while) with 4 jobs
* (1/2) Generating C.UTF-8 ...[error] cannot write output files to `C.UTF8': File exists
[ !! ]
* (2/2) Generating C.UTF-8 ... [ ok ]
* Generation complete
* Adding locales to archive ... [ !! ]
locale-gen failed
27 Apr 2020 03:43:43 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/controller.sh', 'run']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/stage1/controller.sh', 'run']) exited 1
27 Apr 2020 03:43:43 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200427T032205Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200427T032205Z/var/tmp/portage is not a mount point. Skipping
27 Apr 2020 03:43:43 UTC: ERROR : CatalystError: Stage build aborting due to error.
ERROR:catalyst:CatalystError: Stage build aborting due to error.
27 Apr 2020 03:43:43 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1474, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1378, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
ERROR:catalyst:Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1474, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1378, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
27 Apr 2020 03:43:43 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
27 Apr 2020 03:43:43 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200427T032205Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200427T032205Z/tmp/kerncache is not a mount point. Skipping
27 Apr 2020 03:43:43 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200427T032205Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200427T032205Z/var/cache/binpkgs is not a mount point. Skipping
27 Apr 2020 03:43:43 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200427T032205Z/tmp/stage1root/proc is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200427T032205Z/tmp/stage1root/proc is not a mount point. Skipping
27 Apr 2020 03:43:43 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200427T032205Z/run is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200427T032205Z/run is not a mount point. Skipping
27 Apr 2020 03:43:43 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200427T032205Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200427T032205Z/dev/shm does not exist. Skipping
27 Apr 2020 03:43:43 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200427T032205Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200427T032205Z/dev/pts does not exist. Skipping
27 Apr 2020 03:43:43 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200427T032205Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200427T032205Z/var/tmp/portage is not a mount point. Skipping
27 Apr 2020 03:43:43 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200427T032205Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200427T032205Z/var/cache/distfiles is not a mount point. Skipping
27 Apr 2020 03:43:43 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200427T032205Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200427T032205Z/var/db/repos/gentoo is not a mount point. Skipping
27 Apr 2020 03:43:43 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200427T032205Z/dev is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200427T032205Z/dev is not a mount point. Skipping
27 Apr 2020 03:43:43 UTC: NOTICE : /home/catalyst/tmp/default/stage1-ia64-20200427T032205Z/proc is not a mount point. Skipping
NOTICE:catalyst:/home/catalyst/tmp/default/stage1-ia64-20200427T032205Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
1204.83user 161.43system 20:17.61elapsed 112%CPU (0avgtext+0avgdata 222080maxresident)k
0inputs+0outputs (17major+17644030minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200427T032205Z.lq5YYV/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2019-10-06 20:06 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2019-10-06 20:06 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage1.spec
06 Oct 2019 20:05:42 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
06 Oct 2019 20:05:42 UTC: NOTICE : conf_values[options] = {'pkgcache', 'snapcache', 'kerncache', 'autoresume', 'bindist', 'clear-autoresume'}
06 Oct 2019 20:05:42 UTC: NOTICE : Processing spec file: stage1.spec
06 Oct 2019 20:05:42 UTC: NOTICE : Using target: stage1
06 Oct 2019 20:05:42 UTC: NOTICE : Source file specification matching setting is: strict
06 Oct 2019 20:05:42 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
06 Oct 2019 20:05:43 UTC: NOTICE : Source path set to /home/catalyst/builds/default/stage3-ia64-latest.tar.xz
06 Oct 2019 20:05:43 UTC: NOTICE : stage1 stage path is /home/catalyst/tmp/default/stage1-ia64-20191006T200327Z/tmp/stage1root
06 Oct 2019 20:05:43 UTC: NOTICE : Removing AutoResume Points ...
06 Oct 2019 20:05:43 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-stage1-ia64-20191006T200327Z
06 Oct 2019 20:05:43 UTC: NOTICE : --- Running action sequence: unpack
06 Oct 2019 20:05:43 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
06 Oct 2019 20:05:43 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
06 Oct 2019 20:05:43 UTC: NOTICE : Removing AutoResume Points ...
06 Oct 2019 20:05:43 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/.autoresume-stage1-ia64-20191006T200327Z
06 Oct 2019 20:05:43 UTC: NOTICE : Clearing the chroot path ...
06 Oct 2019 20:05:43 UTC: NOTICE : Emptying directory: /home/catalyst/tmp/default/stage1-ia64-20191006T200327Z
06 Oct 2019 20:05:43 UTC: NOTICE : Starting auto from /home/catalyst/builds/default/stage3-ia64-latest.tar.xz
06 Oct 2019 20:05:43 UTC: NOTICE : to /home/catalyst/tmp/default/stage1-ia64-20191006T200327Z (this may take some time) ..
06 Oct 2019 20:06:01 UTC: NOTICE : --- Running action sequence: unpack_snapshot
06 Oct 2019 20:06:01 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
Decompression Error: No mode was passed in or automatically detected
06 Oct 2019 20:06:01 UTC: ERROR : Error unpacking snapshot using mode None
06 Oct 2019 20:06:01 UTC: NOTICE : --- Running action sequence: setup_confdir
06 Oct 2019 20:06:01 UTC: NOTICE : --- Running action sequence: portage_overlay
06 Oct 2019 20:06:01 UTC: NOTICE : --- Running action sequence: base_dirs
06 Oct 2019 20:06:01 UTC: NOTICE : --- Running action sequence: bind
06 Oct 2019 20:06:01 UTC: NOTICE : --- Running action sequence: chroot_setup
06 Oct 2019 20:06:01 UTC: NOTICE : Setting up chroot...
06 Oct 2019 20:06:01 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
06 Oct 2019 20:06:01 UTC: WARNING : If your build fails look here first as the possible problem.
06 Oct 2019 20:06:01 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
06 Oct 2019 20:06:01 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
06 Oct 2019 20:06:01 UTC: WARNING : You have been warned.
06 Oct 2019 20:06:01 UTC: NOTICE : Writing the stage make.conf to: /home/catalyst/tmp/default/stage1-ia64-20191006T200327Z/etc/portage/make.conf
06 Oct 2019 20:06:01 UTC: NOTICE : STICKY-CONFIG is enabled
06 Oct 2019 20:06:01 UTC: NOTICE : --- Running action sequence: setup_environment
06 Oct 2019 20:06:01 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/catalyst/tmp/default/stage1-ia64-20191006T200327Z/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/catalyst/tmp/default/stage1-ia64-20191006T200327Z/tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/stage1-ia64-20191006T200327Z/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
chroot /home/catalyst/tmp/default/stage1-ia64-20191006T200327Z /tmp/stage1-chroot.sh
sed: can't read /var/db/repos/gentoo/profiles/profiles.desc: No such file or directory
!!! Error: default/linux/ia64/17.0 is not a valid profile for ia64
exiting
>>> Regenerating /etc/ld.so.cache...
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
06 Oct 2019 20:06:06 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
06 Oct 2019 20:06:07 UTC: WARNING : /home/catalyst/tmp/default/stage1-ia64-20191006T200327Z/var/tmp/portage is not a mount point. Skipping.
06 Oct 2019 20:06:07 UTC: ERROR : CatalystError: Stage build aborting due to error.
06 Oct 2019 20:06:07 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1362, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1467, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1371, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
06 Oct 2019 20:06:07 UTC: NOTICE : Cleaning up... Running unbind()
06 Oct 2019 20:06:07 UTC: WARNING : /home/catalyst/tmp/default/stage1-ia64-20191006T200327Z/tmp/kerncache is not a mount point. Skipping.
06 Oct 2019 20:06:07 UTC: WARNING : /home/catalyst/tmp/default/stage1-ia64-20191006T200327Z/var/cache/binpkgs is not a mount point. Skipping.
06 Oct 2019 20:06:07 UTC: WARNING : /home/catalyst/tmp/default/stage1-ia64-20191006T200327Z/tmp/stage1root/proc is not a mount point. Skipping.
06 Oct 2019 20:06:07 UTC: WARNING : /home/catalyst/tmp/default/stage1-ia64-20191006T200327Z/dev/shm does not exist. Skipping.
06 Oct 2019 20:06:07 UTC: WARNING : /home/catalyst/tmp/default/stage1-ia64-20191006T200327Z/dev/pts does not exist. Skipping.
06 Oct 2019 20:06:07 UTC: WARNING : /home/catalyst/tmp/default/stage1-ia64-20191006T200327Z/var/tmp/portage is not a mount point. Skipping.
06 Oct 2019 20:06:07 UTC: WARNING : /home/catalyst/tmp/default/stage1-ia64-20191006T200327Z/var/cache/distfiles is not a mount point. Skipping.
06 Oct 2019 20:06:07 UTC: WARNING : /home/catalyst/tmp/default/stage1-ia64-20191006T200327Z/var/db/repos/gentoo is not a mount point. Skipping.
06 Oct 2019 20:06:07 UTC: WARNING : /home/catalyst/tmp/default/stage1-ia64-20191006T200327Z/dev is not a mount point. Skipping.
06 Oct 2019 20:06:07 UTC: WARNING : /home/catalyst/tmp/default/stage1-ia64-20191006T200327Z/proc is not a mount point. Skipping.
Command exited with non-zero status 2
57.68user 4.57system 0:25.32elapsed 245%CPU (0avgtext+0avgdata 223024maxresident)k
0inputs+0outputs (0major+49568minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191006T200327Z.AnCsrL/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2019-10-04 20:03 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2019-10-04 20:03 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
04 Oct 2019 18:54:38 UTC: NOTICE : STICKY-CONFIG is enabled
04 Oct 2019 18:54:38 UTC: NOTICE : --- Running action sequence: setup_environment
04 Oct 2019 18:54:38 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-ia64-20191004T184823Z/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-ia64-20191004T184823Z/tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-ia64-20191004T184823Z/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
chroot /var/tmp/catalyst/tmp/default/stage1-ia64-20191004T184823Z /tmp/stage1-chroot.sh
>>> Regenerating /etc/ld.so.cache...
Adding USE="${USE} build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-apps/portage-2.3.76
* Determining the location of the kernel source code
* Unable to find kernel sources at /usr/src/linux
* Please make sure that /usr/src/linux points at your running kernel,
* (or the kernel you wish to build against).
* Alternatively, set the KERNEL_DIR environment variable to the kernel sources location
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Checking for suitable kernel configuration options...
[ ok ]
>>> Emerging (1 of 1) sys-apps/portage-2.3.76::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.76::gentoo
* Messages for package sys-apps/portage-2.3.76:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world
>>> Verifying ebuild manifests
>>> Emerging (1 of 4) sys-libs/e2fsprogs-libs-1.45.4::gentoo
>>> Emerging (2 of 4) dev-lang/python-3.6.9::gentoo
>>> Installing (1 of 4) sys-libs/e2fsprogs-libs-1.45.4::gentoo
>>> Installing (2 of 4) dev-lang/python-3.6.9::gentoo
>>> Emerging (3 of 4) sys-fs/e2fsprogs-1.45.4::gentoo
>>> Emerging (4 of 4) dev-lang/python-2.7.16::gentoo
>>> Installing (3 of 4) sys-fs/e2fsprogs-1.45.4::gentoo
>>> Installing (4 of 4) dev-lang/python-2.7.16::gentoo
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.6-r1::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.6-r1::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.6-r1 merged to /tmp/stage1root/:
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot app-arch/bzip2 app-arch/gzip app-arch/xz-utils app-arch/tar app-shells/bash:0 net-misc/rsync net-misc/wget sys-devel/autoconf sys-devel/automake sys-devel/libtool sys-apps/baselayout sys-apps/makedev sys-apps/coreutils sys-apps/diffutils sys-apps/file sys-apps/findutils sys-apps/gawk sys-apps/grep sys-apps/less sys-apps/net-tools sys-apps/portage sys-apps/sed sys-devel/binutils sys-devel/bison sys-devel/flex sys-devel/gcc sys-devel/gettext sys-devel/gnuconfig sys-devel/make sys-devel/patch virtual/editor virtual/libc virtual/os-headers virtual/pkgconfig virtual/shadow sys-apps/which
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-libs/glibc-2.29-r2
* Checking general environment sanity.
* Checking gcc for __thread support ...
[ ok ]
* Checking running kernel version (4.9.95-gentoo >= 3.2.0) ...
[ ok ]
* Checking linux-headers version (4.19.0 >= 3.2.0) ...
[ ok ]
>>> Running pre-merge checks for sys-apps/portage-2.3.76
* Determining the location of the kernel source code
* Unable to find kernel sources at /tmp/stage1root/usr/src/linux
* Please ensure that the KERNEL_DIR environment variable points at full Linux sources of the kernel you wish to compile against.
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Checking for suitable kernel configuration options...
[ ok ]
>>> Running pre-merge checks for sys-devel/gcc-8.3.0-r1
>>> Emerging (1 of 81) sys-libs/ncurses-6.1_p20181020::gentoo for /tmp/stage1root/
>>> Emerging (2 of 81) app-arch/bzip2-1.0.6-r11::gentoo for /tmp/stage1root/
>>> Emerging (3 of 81) sys-apps/gentoo-functions-0.12::gentoo for /tmp/stage1root/
>>> Emerging (4 of 81) virtual/libiconv-0-r2::gentoo for /tmp/stage1root/
>>> Emerging (5 of 81) sys-devel/gnuconfig-20180101::gentoo for /tmp/stage1root/
>>> Emerging (6 of 81) app-arch/tar-1.32::gentoo for /tmp/stage1root/
>>> Emerging (7 of 81) sys-apps/sed-4.5::gentoo for /tmp/stage1root/
>>> Emerging (8 of 81) sys-libs/timezone-data-2019b-r1::gentoo for /tmp/stage1root/
>>> Emerging (9 of 81) app-misc/editor-wrapper-4-r1::gentoo for /tmp/stage1root/
>>> Emerging (10 of 81) app-arch/gzip-1.9::gentoo for /tmp/stage1root/
>>> Emerging (11 of 81) sys-apps/baselayout-2.6-r1::gentoo for /tmp/stage1root/
>>> Emerging (12 of 81) sys-apps/findutils-4.6.0-r1::gentoo for /tmp/stage1root/
>>> Emerging (13 of 81) sys-devel/make-4.2.1-r4::gentoo for /tmp/stage1root/
>>> Emerging (14 of 81) sys-devel/patch-2.7.6-r4::gentoo for /tmp/stage1root/
>>> Emerging (15 of 81) sys-apps/which-2.21::gentoo for /tmp/stage1root/
>>> Emerging (16 of 81) virtual/libintl-0-r2::gentoo for /tmp/stage1root/
>>> Emerging (17 of 81) dev-lang/python-exec-2.4.6-r1::gentoo for /tmp/stage1root/
>>> Installing (16 of 81) virtual/libintl-0-r2::gentoo to /tmp/stage1root/
>>> Emerging (18 of 81) sys-devel/automake-wrapper-11::gentoo for /tmp/stage1root/
>>> Installing (17 of 81) dev-lang/python-exec-2.4.6-r1::gentoo to /tmp/stage1root/
>>> Installing (18 of 81) sys-devel/automake-wrapper-11::gentoo to /tmp/stage1root/
>>> Emerging (19 of 81) sys-devel/autoconf-wrapper-13-r1::gentoo for /tmp/stage1root/
>>> Emerging (20 of 81) dev-libs/libffi-3.3_rc0::gentoo for /tmp/stage1root/
>>> Emerging (21 of 81) dev-util/pkgconf-1.6.3::gentoo for /tmp/stage1root/
>>> Installing (19 of 81) sys-devel/autoconf-wrapper-13-r1::gentoo to /tmp/stage1root/
>>> Emerging (22 of 81) sys-apps/makedev-3.23.1-r1::gentoo for /tmp/stage1root/
>>> Installing (20 of 81) dev-libs/libffi-3.3_rc0::gentoo to /tmp/stage1root/
>>> Installing (21 of 81) dev-util/pkgconf-1.6.3::gentoo to /tmp/stage1root/
>>> Installing (22 of 81) sys-apps/makedev-3.23.1-r1::gentoo to /tmp/stage1root/
>>> Emerging (23 of 81) sys-apps/coreutils-8.30::gentoo for /tmp/stage1root/
>>> Emerging (24 of 81) sys-apps/diffutils-3.6-r1::gentoo for /tmp/stage1root/
>>> Emerging (25 of 81) sys-apps/net-tools-1.60_p20180626073013::gentoo for /tmp/stage1root/
>>> Emerging (26 of 81) sys-devel/m4-1.4.18-r1::gentoo for /tmp/stage1root/
>>> Emerging (27 of 81) virtual/libffi-3.3_rc0::gentoo for /tmp/stage1root/
>>> Installing (27 of 81) virtual/libffi-3.3_rc0::gentoo to /tmp/stage1root/
>>> Emerging (28 of 81) sys-apps/sandbox-2.13::gentoo for /tmp/stage1root/
>>> Installing (26 of 81) sys-devel/m4-1.4.18-r1::gentoo to /tmp/stage1root/
>>> Installing (28 of 81) sys-apps/sandbox-2.13::gentoo to /tmp/stage1root/
>>> Emerging (29 of 81) app-misc/pax-utils-1.2.3::gentoo for /tmp/stage1root/
>>> Emerging (30 of 81) dev-libs/libltdl-2.4.6::gentoo for /tmp/stage1root/
>>> Emerging (31 of 81) virtual/pkgconfig-1::gentoo for /tmp/stage1root/
>>> Installing (31 of 81) virtual/pkgconfig-1::gentoo to /tmp/stage1root/
>>> Installing (29 of 81) app-misc/pax-utils-1.2.3::gentoo to /tmp/stage1root/
>>> Installing (30 of 81) dev-libs/libltdl-2.4.6::gentoo to /tmp/stage1root/
>>> Installing (3 of 81) sys-apps/gentoo-functions-0.12::gentoo to /tmp/stage1root/
>>> Installing (4 of 81) virtual/libiconv-0-r2::gentoo to /tmp/stage1root/
>>> Installing (2 of 81) app-arch/bzip2-1.0.6-r11::gentoo to /tmp/stage1root/
>>> Installing (5 of 81) sys-devel/gnuconfig-20180101::gentoo to /tmp/stage1root/
>>> Installing (8 of 81) sys-libs/timezone-data-2019b-r1::gentoo to /tmp/stage1root/
>>> Installing (9 of 81) app-misc/editor-wrapper-4-r1::gentoo to /tmp/stage1root/
>>> Installing (10 of 81) app-arch/gzip-1.9::gentoo to /tmp/stage1root/
>>> Installing (7 of 81) sys-apps/sed-4.5::gentoo to /tmp/stage1root/
>>> Installing (6 of 81) app-arch/tar-1.32::gentoo to /tmp/stage1root/
>>> Installing (11 of 81) sys-apps/baselayout-2.6-r1::gentoo to /tmp/stage1root/
>>> Installing (1 of 81) sys-libs/ncurses-6.1_p20181020::gentoo to /tmp/stage1root/
>>> Installing (13 of 81) sys-devel/make-4.2.1-r4::gentoo to /tmp/stage1root/
>>> Installing (15 of 81) sys-apps/which-2.21::gentoo to /tmp/stage1root/
>>> Installing (14 of 81) sys-devel/patch-2.7.6-r4::gentoo to /tmp/stage1root/
>>> Installing (12 of 81) sys-apps/findutils-4.6.0-r1::gentoo to /tmp/stage1root/
>>> Installing (25 of 81) sys-apps/net-tools-1.60_p20180626073013::gentoo to /tmp/stage1root/
>>> Installing (24 of 81) sys-apps/diffutils-3.6-r1::gentoo to /tmp/stage1root/
>>> Installing (23 of 81) sys-apps/coreutils-8.30::gentoo to /tmp/stage1root/
>>> Emerging (32 of 81) sys-devel/gcc-config-2.0::gentoo for /tmp/stage1root/
>>> Emerging (33 of 81) sys-devel/binutils-config-5.1-r1::gentoo for /tmp/stage1root/
>>> Emerging (34 of 81) sys-apps/less-531::gentoo for /tmp/stage1root/
>>> Emerging (35 of 81) sys-libs/zlib-1.2.11-r2::gentoo for /tmp/stage1root/
>>> Emerging (36 of 81) dev-libs/gmp-6.1.2-r1::gentoo for /tmp/stage1root/
>>> Emerging (37 of 81) app-arch/xz-utils-5.2.4-r2::gentoo for /tmp/stage1root/
>>> Emerging (38 of 81) sys-apps/file-5.36::gentoo for /tmp/stage1root/
>>> Emerging (39 of 81) dev-libs/libunistring-0.9.10::gentoo for /tmp/stage1root/
>>> Emerging (40 of 81) sys-apps/util-linux-2.33.2::gentoo for /tmp/stage1root/
>>> Emerging (41 of 81) dev-libs/popt-1.16-r2::gentoo for /tmp/stage1root/
>>> Emerging (42 of 81) sys-libs/readline-7.0_p5::gentoo for /tmp/stage1root/
>>> Installing (32 of 81) sys-devel/gcc-config-2.0::gentoo to /tmp/stage1root/
>>> Installing (33 of 81) sys-devel/binutils-config-5.1-r1::gentoo to /tmp/stage1root/
>>> Installing (35 of 81) sys-libs/zlib-1.2.11-r2::gentoo to /tmp/stage1root/
>>> Installing (34 of 81) sys-apps/less-531::gentoo to /tmp/stage1root/
>>> Installing (37 of 81) app-arch/xz-utils-5.2.4-r2::gentoo to /tmp/stage1root/
>>> Installing (38 of 81) sys-apps/file-5.36::gentoo to /tmp/stage1root/
>>> Installing (36 of 81) dev-libs/gmp-6.1.2-r1::gentoo to /tmp/stage1root/
>>> Installing (41 of 81) dev-libs/popt-1.16-r2::gentoo to /tmp/stage1root/
>>> Installing (42 of 81) sys-libs/readline-7.0_p5::gentoo to /tmp/stage1root/
>>> Installing (39 of 81) dev-libs/libunistring-0.9.10::gentoo to /tmp/stage1root/
>>> Installing (40 of 81) sys-apps/util-linux-2.33.2::gentoo to /tmp/stage1root/
>>> Emerging (43 of 81) app-editors/nano-4.2::gentoo for /tmp/stage1root/
>>> Emerging (44 of 81) sys-apps/shadow-4.6::gentoo for /tmp/stage1root/
>>> Emerging (45 of 81) net-misc/wget-1.20.3-r1::gentoo for /tmp/stage1root/
>>> Emerging (46 of 81) sys-apps/grep-3.1-r1::gentoo for /tmp/stage1root/
>>> Installing (44 of 81) sys-apps/shadow-4.6::gentoo to /tmp/stage1root/
>>> Installing (43 of 81) app-editors/nano-4.2::gentoo to /tmp/stage1root/
>>> Installing (46 of 81) sys-apps/grep-3.1-r1::gentoo to /tmp/stage1root/
>>> Installing (45 of 81) net-misc/wget-1.20.3-r1::gentoo to /tmp/stage1root/
>>> Emerging (47 of 81) sys-devel/bison-3.1::gentoo for /tmp/stage1root/
>>> Emerging (48 of 81) sys-devel/flex-2.6.4-r1::gentoo for /tmp/stage1root/
>>> Emerging (49 of 81) dev-libs/mpfr-3.1.6::gentoo for /tmp/stage1root/
>>> Emerging (50 of 81) app-shells/bash-4.4_p23-r1::gentoo for /tmp/stage1root/
>>> Installing (48 of 81) sys-devel/flex-2.6.4-r1::gentoo to /tmp/stage1root/
>>> Installing (47 of 81) sys-devel/bison-3.1::gentoo to /tmp/stage1root/
>>> Installing (49 of 81) dev-libs/mpfr-3.1.6::gentoo to /tmp/stage1root/
>>> Installing (50 of 81) app-shells/bash-4.4_p23-r1::gentoo to /tmp/stage1root/
>>> Emerging (51 of 81) net-misc/rsync-3.1.3::gentoo for /tmp/stage1root/
>>> Emerging (52 of 81) sys-apps/gawk-4.2.1-r1::gentoo for /tmp/stage1root/
>>> Emerging (53 of 81) sys-devel/binutils-2.32-r1::gentoo for /tmp/stage1root/
>>> Emerging (54 of 81) virtual/editor-0-r2::gentoo for /tmp/stage1root/
>>> Emerging (55 of 81) virtual/shadow-0::gentoo for /tmp/stage1root/
>>> Emerging (56 of 81) dev-libs/mpc-1.0.3::gentoo for /tmp/stage1root/
>>> Emerging (57 of 81) app-admin/eselect-1.4.14::gentoo for /tmp/stage1root/
>>> Emerging (58 of 81) sys-kernel/linux-headers-4.19::gentoo for /tmp/stage1root/
>>> Installing (57 of 81) app-admin/eselect-1.4.14::gentoo to /tmp/stage1root/
>>> Installing (54 of 81) virtual/editor-0-r2::gentoo to /tmp/stage1root/
>>> Installing (51 of 81) net-misc/rsync-3.1.3::gentoo to /tmp/stage1root/
>>> Installing (52 of 81) sys-apps/gawk-4.2.1-r1::gentoo to /tmp/stage1root/
>>> Installing (55 of 81) virtual/shadow-0::gentoo to /tmp/stage1root/
>>> Installing (53 of 81) sys-devel/binutils-2.32-r1::gentoo to /tmp/stage1root/
>>> Installing (56 of 81) dev-libs/mpc-1.0.3::gentoo to /tmp/stage1root/
>>> Installing (58 of 81) sys-kernel/linux-headers-4.19::gentoo to /tmp/stage1root/
>>> Emerging (59 of 81) app-eselect/eselect-python-20171204::gentoo for /tmp/stage1root/
>>> Emerging (60 of 81) virtual/os-headers-0::gentoo for /tmp/stage1root/
>>> Emerging (61 of 81) net-dns/libidn2-2.1.1a-r1::gentoo for /tmp/stage1root/
>>> Emerging (62 of 81) dev-libs/libxml2-2.9.9::gentoo for /tmp/stage1root/
>>> Installing (59 of 81) app-eselect/eselect-python-20171204::gentoo to /tmp/stage1root/
>>> Emerging (63 of 81) dev-libs/expat-2.2.8::gentoo for /tmp/stage1root/
>>> Emerging (64 of 81) dev-libs/iniparser-3.1-r1::gentoo for /tmp/stage1root/
>>> Installing (64 of 81) dev-libs/iniparser-3.1-r1::gentoo to /tmp/stage1root/
>>> Installing (62 of 81) dev-libs/libxml2-2.9.9::gentoo to /tmp/stage1root/
>>> Installing (63 of 81) dev-libs/expat-2.2.8::gentoo to /tmp/stage1root/
>>> Emerging (65 of 81) dev-lang/python-3.6.9::gentoo for /tmp/stage1root/
>>> Emerging (66 of 81) dev-lang/python-2.7.16::gentoo for /tmp/stage1root/
>>> Emerging (67 of 81) app-portage/portage-utils-0.80::gentoo for /tmp/stage1root/
>>> Emerging (68 of 81) sys-devel/gettext-0.19.8.1::gentoo for /tmp/stage1root/
>>> Installing (67 of 81) app-portage/portage-utils-0.80::gentoo to /tmp/stage1root/
>>> Installing (66 of 81) dev-lang/python-2.7.16::gentoo to /tmp/stage1root/
>>> Installing (65 of 81) dev-lang/python-3.6.9::gentoo to /tmp/stage1root/
Full build log at /tmp/catalyst-auto.20191004T184823Z.T3wF9J/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2019-09-27 3:11 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2019-09-27 3:11 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage1.spec
27 Sep 2019 03:11:57 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
27 Sep 2019 03:11:57 UTC: NOTICE : conf_values[options] = {'kerncache', 'bindist', 'autoresume', 'clear-autoresume', 'snapcache', 'seedcache', 'pkgcache'}
27 Sep 2019 03:11:58 UTC: NOTICE : Processing spec file: stage1.spec
27 Sep 2019 03:11:58 UTC: NOTICE : Using target: stage1
27 Sep 2019 03:11:58 UTC: NOTICE : Source file specification matching setting is: strict
27 Sep 2019 03:11:58 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
27 Sep 2019 03:11:59 UTC: NOTICE : Source path set to /var/tmp/catalyst/builds/default/stage3-ia64-latest.tar.bz2
27 Sep 2019 03:11:59 UTC: NOTICE : stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-ia64-20190927T031005Z/tmp/stage1root
27 Sep 2019 03:11:59 UTC: ERROR : CatalystError: Cannot locate specified distdir: /var/cache/distfiles
Command exited with non-zero status 2
1.82user 0.20system 0:02.05elapsed 99%CPU (0avgtext+0avgdata 23232maxresident)k
0inputs+0outputs (0major+4665minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190927T031005Z.TCq3Gc/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2019-09-25 3:12 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2019-09-25 3:12 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage1.spec
25 Sep 2019 03:12:04 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
25 Sep 2019 03:12:04 UTC: NOTICE : conf_values[options] = {'clear-autoresume', 'kerncache', 'bindist', 'snapcache', 'autoresume', 'pkgcache', 'seedcache'}
25 Sep 2019 03:12:04 UTC: NOTICE : Processing spec file: stage1.spec
25 Sep 2019 03:12:05 UTC: NOTICE : Using target: stage1
25 Sep 2019 03:12:05 UTC: NOTICE : Source file specification matching setting is: strict
25 Sep 2019 03:12:05 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
25 Sep 2019 03:12:06 UTC: NOTICE : Source path set to /var/tmp/catalyst/builds/default/stage3-ia64-latest.tar.bz2
25 Sep 2019 03:12:06 UTC: NOTICE : stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-ia64-20190925T031004Z/tmp/stage1root
25 Sep 2019 03:12:06 UTC: ERROR : CatalystError: Cannot locate specified distdir: /var/cache/distfiles
Command exited with non-zero status 2
1.90user 0.12system 0:02.06elapsed 98%CPU (0avgtext+0avgdata 23232maxresident)k
0inputs+0outputs (0major+4673minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190925T031004Z.qN3ogi/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2019-09-24 3:11 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2019-09-24 3:11 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage1.spec
24 Sep 2019 03:11:52 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
24 Sep 2019 03:11:52 UTC: NOTICE : conf_values[options] = {'bindist', 'seedcache', 'autoresume', 'pkgcache', 'kerncache', 'clear-autoresume', 'snapcache'}
24 Sep 2019 03:11:53 UTC: NOTICE : Processing spec file: stage1.spec
24 Sep 2019 03:11:53 UTC: NOTICE : Using target: stage1
24 Sep 2019 03:11:53 UTC: NOTICE : Source file specification matching setting is: strict
24 Sep 2019 03:11:53 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
24 Sep 2019 03:11:54 UTC: NOTICE : Source path set to /var/tmp/catalyst/builds/default/stage3-ia64-latest.tar.bz2
24 Sep 2019 03:11:55 UTC: NOTICE : stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-ia64-20190924T031004Z/tmp/stage1root
24 Sep 2019 03:11:55 UTC: ERROR : CatalystError: Cannot locate specified distdir: /var/cache/distfiles
Command exited with non-zero status 2
1.99user 0.03system 0:02.91elapsed 69%CPU (0avgtext+0avgdata 23232maxresident)k
0inputs+0outputs (0major+4675minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190924T031004Z.9Nuzr2/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2019-09-23 3:11 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2019-09-23 3:11 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage1.spec
23 Sep 2019 03:11:56 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
23 Sep 2019 03:11:56 UTC: NOTICE : conf_values[options] = {'kerncache', 'snapcache', 'autoresume', 'clear-autoresume', 'bindist', 'seedcache', 'pkgcache'}
23 Sep 2019 03:11:56 UTC: NOTICE : Processing spec file: stage1.spec
23 Sep 2019 03:11:56 UTC: NOTICE : Using target: stage1
23 Sep 2019 03:11:56 UTC: NOTICE : Source file specification matching setting is: strict
23 Sep 2019 03:11:56 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
23 Sep 2019 03:11:57 UTC: NOTICE : Source path set to /var/tmp/catalyst/builds/default/stage3-ia64-latest.tar.bz2
23 Sep 2019 03:11:57 UTC: NOTICE : stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-ia64-20190923T031004Z/tmp/stage1root
23 Sep 2019 03:11:57 UTC: ERROR : CatalystError: Cannot locate specified distdir: /var/cache/distfiles
Command exited with non-zero status 2
1.69user 0.33system 0:02.23elapsed 90%CPU (0avgtext+0avgdata 23232maxresident)k
0inputs+0outputs (0major+4653minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190923T031004Z.ApHi8y/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2019-09-22 3:14 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2019-09-22 3:14 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage1.spec
22 Sep 2019 03:14:22 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
22 Sep 2019 03:14:22 UTC: NOTICE : conf_values[options] = {'autoresume', 'snapcache', 'bindist', 'seedcache', 'kerncache', 'pkgcache', 'clear-autoresume'}
22 Sep 2019 03:14:22 UTC: NOTICE : Processing spec file: stage1.spec
22 Sep 2019 03:14:23 UTC: NOTICE : Using target: stage1
22 Sep 2019 03:14:23 UTC: NOTICE : Source file specification matching setting is: strict
22 Sep 2019 03:14:23 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
22 Sep 2019 03:14:24 UTC: NOTICE : Source path set to /var/tmp/catalyst/builds/default/stage3-ia64-latest.tar.bz2
22 Sep 2019 03:14:24 UTC: NOTICE : stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-ia64-20190922T031004Z/tmp/stage1root
22 Sep 2019 03:14:24 UTC: ERROR : CatalystError: Cannot locate specified distdir: /var/cache/distfiles
Command exited with non-zero status 2
1.92user 0.10system 0:02.36elapsed 86%CPU (0avgtext+0avgdata 23232maxresident)k
0inputs+0outputs (0major+4669minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190922T031004Z.UN8Bz3/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2018-03-15 3:20 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2018-03-15 3:20 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage1.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/home/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/home/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for ia64
stage1 root path is /tmp/stage1root
Source path set to /home/catalyst/builds/default/stage3-ia64-latest.tar.bz2
Caching snapshot to /home/catalyst/snapshot_cache/20180315T031002Z/
The autoresume path is /home/catalyst/tmp/default/.autoresume-stage1-ia64-20180315T031002Z/
stage1 stage path is /home/catalyst/tmp/default/stage1-ia64-20180315T031002Z/tmp/stage1root
Location of the package cache is /home/catalyst/packages/default/stage1-ia64-20180315T031002Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /home/catalyst/tmp/default/.autoresume-stage1-ia64-20180315T031002Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /home/catalyst/tmp/default/.autoresume-stage1-ia64-20180315T031002Z/
Emptying directory /home/catalyst/tmp/default/stage1-ia64-20180315T031002Z/
Starting tar extract from /home/catalyst/builds/default/stage3-ia64-latest.tar.bz2
to /home/catalyst/tmp/default/stage1-ia64-20180315T031002Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/home/catalyst/snapshot_cache/20180315T031002Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/home/catalyst/snapshot_cache/20180315T031002Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /home/catalyst/tmp/default/stage1-ia64-20180315T031002Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/catalyst/tmp/default/stage1-ia64-20180315T031002Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/stage1-ia64-20180315T031002Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /home/catalyst/tmp/default/stage1-ia64-20180315T031002Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.24-r1::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.24-r1::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.24-r1::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.24-r1::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot virtual/pkgconfig sys-devel/flex sys-apps/file sys-apps/gawk sys-apps/net-tools virtual/os-headers sys-devel/patch app-arch/bzip2 sys-apps/findutils sys-apps/less sys-apps/which virtual/libc sys-devel/autoconf sys-devel/automake sys-devel/gettext net-misc/rsync sys-apps/portage app-arch/tar sys-apps/sed sys-devel/bison app-arch/xz-utils app-arch/gzip net-misc/wget sys-devel/libtool virtual/shadow sys-apps/grep sys-apps/coreutils app-shells/bash:0 sys-apps/makedev sys-apps/diffutils sys-apps/baselayout sys-devel/gcc virtual/editor sys-devel/binutils sys-devel/gnuconfig sys-devel/make
>>> Verifying ebuild manifests
!!! A file is not listed in the Manifest: '/usr/portage/sys-devel/automake/automake-1.10.3-r2.ebuild'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage1-ia64-20180315T031002Z/.catalyst_lock'
Command exited with non-zero status 1
246.52user 39.46system 5:33.26elapsed 85%CPU (0avgtext+0avgdata 92736maxresident)k
0inputs+0outputs (2major+2505343minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180315T031002Z.XyXhZT/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2018-01-31 3:16 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2018-01-31 3:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage1.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/home/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/home/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for ia64
stage1 root path is /tmp/stage1root
Source path set to /home/catalyst/builds/default/stage3-ia64-latest.tar.bz2
Caching snapshot to /home/catalyst/snapshot_cache/20180131T031004Z/
The autoresume path is /home/catalyst/tmp/default/.autoresume-stage1-ia64-20180131T031004Z/
stage1 stage path is /home/catalyst/tmp/default/stage1-ia64-20180131T031004Z/tmp/stage1root
Location of the package cache is /home/catalyst/packages/default/stage1-ia64-20180131T031004Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /home/catalyst/tmp/default/.autoresume-stage1-ia64-20180131T031004Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /home/catalyst/tmp/default/.autoresume-stage1-ia64-20180131T031004Z/
Emptying directory /home/catalyst/tmp/default/stage1-ia64-20180131T031004Z/
Starting tar extract from /home/catalyst/builds/default/stage3-ia64-latest.tar.bz2
to /home/catalyst/tmp/default/stage1-ia64-20180131T031004Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/home/catalyst/snapshot_cache/20180131T031004Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/home/catalyst/snapshot_cache/20180131T031004Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /home/catalyst/tmp/default/stage1-ia64-20180131T031004Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/catalyst/tmp/default/stage1-ia64-20180131T031004Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/stage1-ia64-20180131T031004Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /home/catalyst/tmp/default/stage1-ia64-20180131T031004Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
[ebuild N ] app-crypt/gentoo-keys-201607021514
[ebuild N ] dev-libs/libunistring-0.9.7
[ebuild N ] dev-libs/npth-1.3
[ebuild N ] app-eselect/eselect-lib-bin-symlink-0.1.1
[ebuild N ] app-eselect/eselect-pinentry-0.7
[ebuild N ] dev-libs/libassuan-2.5.1
[ebuild N ] dev-libs/libksba-1.3.5-r1
[ebuild N ] dev-python/bz2file-0.98
[ebuild N ] dev-libs/libtasn1-4.12-r1
[ebuild N ] net-dns/libidn2-2.0.4
[ebuild N ] dev-libs/nettle-3.3-r2
[ebuild N ] net-libs/gnutls-3.5.15
[ebuild N ] app-crypt/pinentry-1.0.0-r2
[ebuild N ] net-misc/curl-7.58.0
[ebuild N ] app-crypt/gnupg-2.2.4-r1
[ebuild N ] app-portage/gemato-10.3
[ebuild U ] sys-apps/portage-2.3.21 [2.3.13-r1]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-portage/gemato-10.3::gentoo[gpg]
# required by sys-apps/portage-2.3.21::gentoo[rsync-verify]
# required by sys-apps/portage (argument)
=app-crypt/gnupg-2.2.4-r1 ~ia64
# required by app-portage/gemato-10.3::gentoo[python_targets_python2_7,bzip2]
# required by sys-apps/portage-2.3.21::gentoo[rsync-verify]
# required by sys-apps/portage (argument)
=dev-python/bz2file-0.98 ~ia64
# required by sys-apps/portage-2.3.21::gentoo[rsync-verify]
# required by sys-apps/portage (argument)
=app-portage/gemato-10.3 ~ia64
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage1-ia64-20180131T031004Z/.catalyst_lock'
Command exited with non-zero status 1
93.32user 11.58system 1:57.29elapsed 89%CPU (0avgtext+0avgdata 87600maxresident)k
0inputs+0outputs (0major+94705minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180131T031004Z.FdV7kq/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2018-01-26 8:13 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2018-01-26 8:13 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package sys-apps/util-linux-2.30.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-libs/glibc-2.25-r9:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package dev-lang/perl-5.24.3:
* Removing dead symlink //usr/share/man/man1/ptar.1.bz2
* Removing dead symlink //usr/share/man/man1/ptardiff.1.bz2
* Removing dead symlink //usr/share/man/man1/ptargrep.1.bz2
* Removing dead symlink //usr/share/man/man1/cpan.1.bz2
* Removing dead symlink //usr/share/man/man1/shasum.1.bz2
* Removing dead symlink //usr/share/man/man1/enc2xs.1.bz2
* Removing dead symlink //usr/share/man/man1/piconv.1.bz2
* Removing dead symlink //usr/share/man/man1/instmodsh.1.bz2
* Removing dead symlink //usr/share/man/man1/xsubpp.1.bz2
* Removing dead symlink //usr/share/man/man1/zipdetails.1.bz2
* Removing dead symlink //usr/share/man/man1/json_pp.1.bz2
* Removing dead symlink //usr/share/man/man1/corelist.1.bz2
* Removing dead symlink //usr/share/man/man1/pod2usage.1.bz2
* Removing dead symlink //usr/share/man/man1/podchecker.1.bz2
* Removing dead symlink //usr/share/man/man1/podselect.1.bz2
* Removing dead symlink //usr/share/man/man1/perldoc.1.bz2
* Removing dead symlink //usr/share/man/man1/prove.1.bz2
* Removing dead symlink //usr/share/man/man1/pod2man.1.bz2
* Removing dead symlink //usr/share/man/man1/pod2text.1.bz2
* Removing dead symlink //usr/share/man/man1/perlpodstyle.1.bz2
* Messages for package dev-lang/perl-5.24.3:
* Unable to establish //usr/share/man/man1/ptar.1* symlink
* Unable to establish //usr/share/man/man1/ptardiff.1* symlink
* Unable to establish //usr/share/man/man1/ptargrep.1* symlink
* Unable to establish //usr/share/man/man1/cpan.1* symlink
* Unable to establish //usr/share/man/man1/shasum.1* symlink
* Unable to establish //usr/share/man/man1/enc2xs.1* symlink
* Unable to establish //usr/share/man/man1/piconv.1* symlink
* Unable to establish //usr/share/man/man1/instmodsh.1* symlink
* Unable to establish //usr/share/man/man1/xsubpp.1* symlink
* Unable to establish //usr/share/man/man1/zipdetails.1* symlink
* Unable to establish //usr/share/man/man1/json_pp.1* symlink
* Unable to establish //usr/share/man/man1/corelist.1* symlink
* Unable to establish //usr/share/man/man1/pod2usage.1* symlink
* Unable to establish //usr/share/man/man1/podchecker.1* symlink
* Unable to establish //usr/share/man/man1/podselect.1* symlink
* Unable to establish //usr/share/man/man1/perldoc.1* symlink
* Unable to establish //usr/share/man/man1/prove.1* symlink
* Unable to establish //usr/share/man/man1/pod2man.1* symlink
* Unable to establish //usr/share/man/man1/pod2text.1* symlink
* Unable to establish //usr/share/man/man1/perlpodstyle.1* symlink
* Messages for package sys-fs/eudev-3.1.5:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* CONFIG_IDE: should not be set. But it is.
* CONFIG_FHANDLE: is not set when it should be.
* Please check to make sure these options are set correctly.
* Failure to do so may cause unexpected problems.
*
* You need to restart eudev as soon as possible to make the
* upgrade go into effect:
* /etc/init.d/udev --nodeps restart
*
* For more information on eudev on Gentoo, writing udev rules, and
* fixing known issues visit: https://wiki.gentoo.org/wiki/Eudev
* Messages for package sys-libs/pam-1.2.1-r2:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-devel/gcc-6.4.0-r1:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package sys-apps/man-db-2.7.6.1-r2:
* Defaulting to USE=gdbm due to ambiguous berkdb/gdbm USE flag settings
* Messages for package dev-libs/glib-2.50.3-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/libtool sys-devel/gcc sys-apps/findutils virtual/shadow sys-apps/diffutils virtual/package-manager sys-devel/flex app-shells/bash:0 virtual/libc sys-devel/autoconf sys-apps/sed sys-devel/binutils sys-devel/automake net-misc/rsync sys-devel/gnuconfig sys-apps/makedev virtual/os-headers sys-apps/gawk net-misc/wget sys-devel/gettext app-arch/bzip2 sys-apps/file sys-apps/coreutils app-arch/gzip app-arch/tar sys-apps/baselayout sys-apps/net-tools virtual/editor sys-apps/less sys-apps/which sys-devel/bison virtual/pkgconfig sys-devel/make sys-devel/patch app-arch/xz-utils sys-apps/grep
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-libs/glibc-2.25-r9
>>> Running pre-merge checks for sys-devel/gcc-6.4.0-r1
>>> Emerging (1 of 81) sys-libs/ncurses-6.0-r1::gentoo for /tmp/stage1root/
>>> Installing (1 of 81) sys-libs/ncurses-6.0-r1::gentoo to /tmp/stage1root/
>>> Emerging (2 of 81) virtual/libintl-0-r2::gentoo for /tmp/stage1root/
>>> Installing (2 of 81) virtual/libintl-0-r2::gentoo to /tmp/stage1root/
>>> Emerging (3 of 81) app-arch/bzip2-1.0.6-r8::gentoo for /tmp/stage1root/
>>> Installing (3 of 81) app-arch/bzip2-1.0.6-r8::gentoo to /tmp/stage1root/
>>> Emerging (4 of 81) sys-apps/gentoo-functions-0.12::gentoo for /tmp/stage1root/
>>> Installing (4 of 81) sys-apps/gentoo-functions-0.12::gentoo to /tmp/stage1root/
>>> Emerging (5 of 81) virtual/libiconv-0-r2::gentoo for /tmp/stage1root/
>>> Installing (5 of 81) virtual/libiconv-0-r2::gentoo to /tmp/stage1root/
>>> Emerging (6 of 81) sys-devel/gnuconfig-20170101::gentoo for /tmp/stage1root/
>>> Installing (6 of 81) sys-devel/gnuconfig-20170101::gentoo to /tmp/stage1root/
>>> Emerging (7 of 81) dev-lang/python-exec-2.4.5::gentoo for /tmp/stage1root/
>>> Installing (7 of 81) dev-lang/python-exec-2.4.5::gentoo to /tmp/stage1root/
>>> Emerging (8 of 81) sys-apps/sed-4.2.2::gentoo for /tmp/stage1root/
>>> Installing (8 of 81) sys-apps/sed-4.2.2::gentoo to /tmp/stage1root/
>>> Emerging (9 of 81) app-arch/tar-1.29-r3::gentoo for /tmp/stage1root/
>>> Installing (9 of 81) app-arch/tar-1.29-r3::gentoo to /tmp/stage1root/
>>> Emerging (10 of 81) app-misc/editor-wrapper-4::gentoo for /tmp/stage1root/
>>> Installing (10 of 81) app-misc/editor-wrapper-4::gentoo to /tmp/stage1root/
>>> Emerging (11 of 81) sys-libs/timezone-data-2017c::gentoo for /tmp/stage1root/
>>> Installing (11 of 81) sys-libs/timezone-data-2017c::gentoo to /tmp/stage1root/
>>> Emerging (12 of 81) sys-apps/findutils-4.6.0-r1::gentoo for /tmp/stage1root/
>>> Installing (12 of 81) sys-apps/findutils-4.6.0-r1::gentoo to /tmp/stage1root/
>>> Emerging (13 of 81) sys-apps/gawk-4.1.4::gentoo for /tmp/stage1root/
>>> Installing (13 of 81) sys-apps/gawk-4.1.4::gentoo to /tmp/stage1root/
>>> Emerging (14 of 81) app-arch/gzip-1.8::gentoo for /tmp/stage1root/
>>> Installing (14 of 81) app-arch/gzip-1.8::gentoo to /tmp/stage1root/
>>> Emerging (15 of 81) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (15 of 81) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
>>> Emerging (16 of 81) sys-apps/which-2.21::gentoo for /tmp/stage1root/
>>> Installing (16 of 81) sys-apps/which-2.21::gentoo to /tmp/stage1root/
>>> Emerging (17 of 81) sys-devel/make-4.2.1::gentoo for /tmp/stage1root/
>>> Installing (17 of 81) sys-devel/make-4.2.1::gentoo to /tmp/stage1root/
>>> Emerging (18 of 81) sys-devel/patch-2.7.5::gentoo for /tmp/stage1root/
>>> Installing (18 of 81) sys-devel/patch-2.7.5::gentoo to /tmp/stage1root/
>>> Emerging (19 of 81) sys-devel/automake-wrapper-10::gentoo for /tmp/stage1root/
>>> Installing (19 of 81) sys-devel/automake-wrapper-10::gentoo to /tmp/stage1root/
>>> Emerging (20 of 81) sys-devel/autoconf-wrapper-13::gentoo for /tmp/stage1root/
>>> Installing (20 of 81) sys-devel/autoconf-wrapper-13::gentoo to /tmp/stage1root/
>>> Emerging (21 of 81) sys-apps/makedev-3.23.1::gentoo for /tmp/stage1root/
>>> Installing (21 of 81) sys-apps/makedev-3.23.1::gentoo to /tmp/stage1root/
>>> Emerging (22 of 81) sys-apps/coreutils-8.28-r1::gentoo for /tmp/stage1root/
>>> Installing (22 of 81) sys-apps/coreutils-8.28-r1::gentoo to /tmp/stage1root/
>>> Emerging (23 of 81) sys-devel/binutils-config-5-r4::gentoo for /tmp/stage1root/
>>> Installing (23 of 81) sys-devel/binutils-config-5-r4::gentoo to /tmp/stage1root/
>>> Emerging (24 of 81) sys-devel/gcc-config-1.8-r1::gentoo for /tmp/stage1root/
>>> Installing (24 of 81) sys-devel/gcc-config-1.8-r1::gentoo to /tmp/stage1root/
>>> Emerging (25 of 81) app-misc/pax-utils-1.1.7::gentoo for /tmp/stage1root/
>>> Installing (25 of 81) app-misc/pax-utils-1.1.7::gentoo to /tmp/stage1root/
>>> Emerging (26 of 81) sys-apps/sandbox-2.12::gentoo for /tmp/stage1root/
>>> Installing (26 of 81) sys-apps/sandbox-2.12::gentoo to /tmp/stage1root/
>>> Emerging (27 of 81) sys-apps/diffutils-3.5::gentoo for /tmp/stage1root/
>>> Installing (27 of 81) sys-apps/diffutils-3.5::gentoo to /tmp/stage1root/
>>> Emerging (28 of 81) sys-apps/net-tools-1.60_p20161110235919::gentoo for /tmp/stage1root/
>>> Installing (28 of 81) sys-apps/net-tools-1.60_p20161110235919::gentoo to /tmp/stage1root/
>>> Emerging (29 of 81) sys-apps/less-529::gentoo for /tmp/stage1root/
>>> Installing (29 of 81) sys-apps/less-529::gentoo to /tmp/stage1root/
>>> Emerging (30 of 81) sys-devel/m4-1.4.17::gentoo for /tmp/stage1root/
>>> Installing (30 of 81) sys-devel/m4-1.4.17::gentoo to /tmp/stage1root/
>>> Emerging (31 of 81) dev-libs/libltdl-2.4.6::gentoo for /tmp/stage1root/
>>> Installing (31 of 81) dev-libs/libltdl-2.4.6::gentoo to /tmp/stage1root/
>>> Emerging (32 of 81) sys-libs/zlib-1.2.11-r1::gentoo for /tmp/stage1root/
>>> Installing (32 of 81) sys-libs/zlib-1.2.11-r1::gentoo to /tmp/stage1root/
>>> Emerging (33 of 81) dev-libs/gmp-6.1.2::gentoo for /tmp/stage1root/
>>> Installing (33 of 81) dev-libs/gmp-6.1.2::gentoo to /tmp/stage1root/
>>> Emerging (34 of 81) sys-apps/file-5.32::gentoo for /tmp/stage1root/
>>> Installing (34 of 81) sys-apps/file-5.32::gentoo to /tmp/stage1root/
>>> Emerging (35 of 81) app-arch/xz-utils-5.2.3::gentoo for /tmp/stage1root/
>>> Installing (35 of 81) app-arch/xz-utils-5.2.3::gentoo to /tmp/stage1root/
>>> Emerging (36 of 81) dev-libs/popt-1.16-r2::gentoo for /tmp/stage1root/
>>> Installing (36 of 81) dev-libs/popt-1.16-r2::gentoo to /tmp/stage1root/
>>> Emerging (37 of 81) sys-apps/shadow-4.5::gentoo for /tmp/stage1root/
Command terminated by signal 15
74.95user 10.94system 4:53:42elapsed 0%CPU (0avgtext+0avgdata 85168maxresident)k
0inputs+0outputs (2major+69408minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180126T031007Z.AjA5m3/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2016-01-19 4:21 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2016-01-19 4:21 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
config.status: creating Makefile
config.status: creating data/Makefile
config.status: creating etc/Makefile
config.status: creating etc/sandbox.d/00default
config.status: creating etc/sandbox.d/Makefile
config.status: creating libsandbox/Makefile
config.status: creating libsbutil/Makefile
config.status: creating scripts/Makefile
config.status: creating src/Makefile
config.status: creating tests/atlocal
config.status: creating tests/Makefile
config.status: creating tests/package.m4
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing tests/atconfig commands
* Running sb_compile for ABI=ia64...
GEN libsbutil/headers.h.gch
GEN libsandbox/headers.h.gch
GEN headers.h.gch
make all-recursive
Making all in scripts
make[2]: Nothing to be done for 'all'.
Making all in etc
Making all in sandbox.d
make[3]: Nothing to be done for 'all'.
make[3]: Nothing to be done for 'all-am'.
Making all in data
make[2]: Nothing to be done for 'all'.
Making all in libsbutil
CC get_sandbox_conf.lo
CC get_sandbox_confd.lo
CC get_sandbox_lib.lo
CC get_sandbox_rc.lo
CC get_sandbox_log.lo
CC get_tmp_dir.lo
CC environment.lo
CC sb_backtrace.lo
CC sb_efuncs.lo
CC sb_gdb.lo
CC sb_open.lo
CC sb_read.lo
/var/tmp/portage/sys-apps/sandbox-2.10-r1/work/sandbox-2.10/libsbutil/sb_gdb.c: In function 'sb_gdb':
/var/tmp/portage/sys-apps/sandbox-2.10-r1/work/sandbox-2.10/libsbutil/sb_gdb.c:59:2: warning: implicit declaration of function '__clone2' [-Wimplicit-function-declaration]
if (clone(__sb_connect_gdb, stack + STACK_SIZE, 0, (void *)(uintptr_t)pid) !=
^
CC sb_write.lo
CC sb_write_fd.lo
CC sb_close.lo
CC sb_printf.lo
CC sb_proc.lo
CC sb_memory.lo
CC src/debug.lo
CC src/string.lo
CC src/file.lo
CC src/config.lo
CC src/dynbuf.lo
CC gnulib/areadlink-with-size.lo
CC gnulib/bitrotate.lo
CC gnulib/canonicalize.lo
CC gnulib/file-set.lo
CC gnulib/hash.lo
CC gnulib/hash-pjw.lo
CC gnulib/hash-triple.lo
CCLD libsbutil.la
Making all in libsandbox
GEN libsandbox.map
GEN symbols.h
CC libsandbox_la-memory.lo
CC libsandbox_la-lock.lo
GEN trace_syscalls.h
CC libsandbox_la-canonicalize.lo
GEN sb_nr.h
CC libsandbox_la-wrappers.lo
CC libsandbox_la-libsandbox.lo
CC libsandbox_la-trace.lo
In file included from /var/tmp/portage/sys-apps/sandbox-2.10-r1/work/sandbox-2.10/libsandbox/trace/os.c:6:0,
from /var/tmp/portage/sys-apps/sandbox-2.10-r1/work/sandbox-2.10/libsandbox/trace.c:25:
/var/tmp/portage/sys-apps/sandbox-2.10-r1/work/sandbox-2.10/libsandbox/trace/linux/arch.c:21:3: warning: #warning "trace: sorry, no support for your architecture" [-Wcpp]
# warning "trace: sorry, no support for your architecture"
^
In file included from /var/tmp/portage/sys-apps/sandbox-2.10-r1/work/sandbox-2.10/libsandbox/trace/os.c:1:0,
from /var/tmp/portage/sys-apps/sandbox-2.10-r1/work/sandbox-2.10/libsandbox/trace.c:25:
/var/tmp/portage/sys-apps/sandbox-2.10-r1/work/sandbox-2.10/libsandbox/trace/common.c:7:13: warning: 'trace_raw_ret' used but never defined
static long trace_raw_ret(void *vregs);
^
/var/tmp/portage/sys-apps/sandbox-2.10-r1/work/sandbox-2.10/libsandbox/trace.c:12:13: warning: '_do_ptrace' declared 'static' but never defined [-Wunused-function]
static long _do_ptrace(enum __ptrace_request request, const char *srequest, voi
^
In file included from /var/tmp/portage/sys-apps/sandbox-2.10-r1/work/sandbox-2.10/libsandbox/trace/os.c:1:0,
from /var/tmp/portage/sys-apps/sandbox-2.10-r1/work/sandbox-2.10/libsandbox/trace.c:25:
/var/tmp/portage/sys-apps/sandbox-2.10-r1/work/sandbox-2.10/libsandbox/trace/common.c:6:12: warning: 'trace_get_sysnum' declared 'static' but never defined [-Wunused-function]
static int trace_get_sysnum(void *vregs);
^
/var/tmp/portage/sys-apps/sandbox-2.10-r1/work/sandbox-2.10/libsandbox/trace/common.c:8:22: warning: 'trace_arg' declared 'static' but never defined [-Wunused-function]
static unsigned long trace_arg(void *vregs, int num);
^
In file included from /var/tmp/portage/sys-apps/sandbox-2.10-r1/work/sandbox-2.10/libsandbox/trace/linux/arch.c:1:0,
from /var/tmp/portage/sys-apps/sandbox-2.10-r1/work/sandbox-2.10/libsandbox/trace/os.c:6,
from /var/tmp/portage/sys-apps/sandbox-2.10-r1/work/sandbox-2.10/libsandbox/trace.c:25:
/var/tmp/portage/sys-apps/sandbox-2.10-r1/work/sandbox-2.10/libsandbox/trace/linux/common.c:13:13: warning: 'trace_result' defined but not used [-Wunused-function]
static long trace_result(void *vregs, int *error)
^
CCLD libsandbox.la
*** Warning: Linking the shared library libsandbox.la against the
*** static library ../libsbutil/.libs/libsbutil.a is not portable!
/usr/lib/gcc/ia64-unknown-linux-gnu/4.9.3/../../../../ia64-unknown-linux-gnu/bin/ld: Warning: gc-sections option ignored
../libsbutil/.libs/libsbutil.a(hash-triple.o): In function `triple_compare':
hash-triple.c:(.text.triple_compare+0xb2): undefined reference to `same_name'
collect2: error: ld returned 1 exit status
Makefile:459: recipe for target 'libsandbox.la' failed
make[2]: *** [libsandbox.la] Error 1
Makefile:484: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
Makefile:396: recipe for target 'all' failed
make: *** [all] Error 2
emake failed
* ERROR: sys-apps/sandbox-2.10-r1::gentoo failed (compile phase):
* (no error message)
*
* Call stack:
* ebuild.sh, line 133: Called src_compile
* environment, line 2609: Called sb_foreach_abi 'sb_compile'
* environment, line 2574: Called sb_compile
* environment, line 2555: Called die
* The specific snippet of code:
* emake || die
*
* If you need support, post the output of `emerge --info '=sys-apps/sandbox-2.10-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/sandbox-2.10-r1::gentoo'`.
* If configure failed with a 'cannot run C compiled programs' error, try this:
* FEATURES=-sandbox emerge sandbox
* The complete build log is located at '/var/tmp/portage/sys-apps/sandbox-2.10-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/sandbox-2.10-r1/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/sandbox-2.10-r1/work/build-ia64'
* S: '/var/tmp/portage/sys-apps/sandbox-2.10-r1/work/sandbox-2.10'
* Messages for package sys-libs/timezone-data-2015f merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package sys-apps/shadow-4.1.5.1-r1 merged to /tmp/stage1root/:
* Running 'grpck' returned errors. Please run it by hand, and then
* run 'grpconv' afterwards!
* Messages for package sys-apps/coreutils-8.23 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/sandbox-2.10-r1 merged to /tmp/stage1root/:
* ERROR: sys-apps/sandbox-2.10-r1::gentoo failed (compile phase):
* (no error message)
*
* Call stack:
* ebuild.sh, line 133: Called src_compile
* environment, line 2609: Called sb_foreach_abi 'sb_compile'
* environment, line 2574: Called sb_compile
* environment, line 2555: Called die
* The specific snippet of code:
* emake || die
*
* If you need support, post the output of `emerge --info '=sys-apps/sandbox-2.10-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/sandbox-2.10-r1::gentoo'`.
* If configure failed with a 'cannot run C compiled programs' error, try this:
* FEATURES=-sandbox emerge sandbox
* The complete build log is located at '/var/tmp/portage/sys-apps/sandbox-2.10-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/sandbox-2.10-r1/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/sandbox-2.10-r1/work/build-ia64'
* S: '/var/tmp/portage/sys-apps/sandbox-2.10-r1/work/sandbox-2.10'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage1-ia64-20160119/.catalyst_lock'
Full build log at /tmp/catalyst-auto.G6MyLp/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2015-12-22 5:10 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2015-12-22 5:10 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/unittest/test/test_runner.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/unittest/test/test_setups.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/unittest/test/test_skipping.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/unittest/test/test_suite.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/unittest/util.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/urllib.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/urllib2.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/urlparse.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/user.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/uu.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/uuid.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/warnings.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/wave.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/weakref.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/webbrowser.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/whichdb.py ...
Listing /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/wsgiref ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/wsgiref/__init__.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/wsgiref/handlers.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/wsgiref/headers.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/wsgiref/simple_server.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/wsgiref/util.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/wsgiref/validate.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xdrlib.py ...
Listing /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/__init__.py ...
Listing /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/dom ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/dom/NodeFilter.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/dom/__init__.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/dom/domreg.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/dom/expatbuilder.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/dom/minicompat.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/dom/minidom.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/dom/pulldom.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/dom/xmlbuilder.py ...
Listing /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/etree ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/etree/ElementInclude.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/etree/ElementPath.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/etree/ElementTree.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/etree/__init__.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/etree/cElementTree.py ...
Listing /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/parsers ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/parsers/__init__.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/parsers/expat.py ...
Listing /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/sax ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/sax/__init__.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/sax/_exceptions.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/sax/expatreader.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/sax/handler.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/sax/saxutils.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/sax/xmlreader.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xmllib.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xmlrpclib.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/zipfile.py ...
PYTHONPATH=/var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7 LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-2.7.10-r1/work/ia64-unknown-linux-gnu \
./python -E -Wi -t /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/compileall.py \
-d /usr/lib/python2.7/site-packages -f \
-x badsyntax /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/site-packages
Listing /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/site-packages ...
PYTHONPATH=/var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7 LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-2.7.10-r1/work/ia64-unknown-linux-gnu \
./python -E -Wi -t -O /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/compileall.py \
-d /usr/lib/python2.7/site-packages -f \
-x badsyntax /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/site-packages
Listing /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/site-packages ...
PYTHONPATH=/var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7 LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-2.7.10-r1/work/ia64-unknown-linux-gnu \
./python -E -m lib2to3.pgen2.driver /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/lib2to3/Grammar.txt
Generating grammar tables from /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/lib2to3/Grammar.txt
Writing grammar tables to /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/lib2to3/Grammar2.7.10.final.0.pickle
PYTHONPATH=/var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7 LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-2.7.10-r1/work/ia64-unknown-linux-gnu \
./python -E -m lib2to3.pgen2.driver /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/lib2to3/PatternGrammar.txt
Generating grammar tables from /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/lib2to3/PatternGrammar.txt
Writing grammar tables to /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/lib2to3/PatternGrammar2.7.10.final.0.pickle
if test "xno" != "xno" ; then \
case no in \
upgrade) ensurepip="--altinstall --upgrade --no-default-pip" ;; \
install|*) ensurepip="--altinstall --no-default-pip" ;; \
esac; \
LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-2.7.10-r1/work/ia64-unknown-linux-gnu ./python -E -m ensurepip \
$ensurepip --root=/var/tmp/portage/dev-lang/python-2.7.10-r1/image// ; \
fi
* ERROR: dev-lang/python-2.7.10-r1::gentoo failed (install phase):
* python_do* and python_new* helpers are banned in EAPIs older than 5.
*
* Call stack:
* ebuild.sh, line 93: Called src_install
* environment, line 4184: Called python_domodule 'epython.py'
* environment, line 3358: Called die
* The specific snippet of code:
* die "python_do* and python_new* helpers are banned in EAPIs older than 5.";
*
* If you need support, post the output of `emerge --info '=dev-lang/python-2.7.10-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-2.7.10-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-2.7.10-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-2.7.10-r1/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-2.7.10-r1/work/ia64-unknown-linux-gnu'
* S: '/var/tmp/portage/dev-lang/python-2.7.10-r1/work/Python-2.7.10'
* Messages for package sys-libs/timezone-data-2015f merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package sys-apps/shadow-4.1.5.1-r1 merged to /tmp/stage1root/:
* Running 'grpck' returned errors. Please run it by hand, and then
* run 'grpconv' afterwards!
* Messages for package sys-apps/coreutils-8.23 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/less-481 merged to /tmp/stage1root/:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package app-portage/portage-utils-0.56 merged to /tmp/stage1root/:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package dev-lang/perl-5.20.2 merged to /tmp/stage1root/:
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptar.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptardiff.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptargrep.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/shasum.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/cpan.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/enc2xs.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/piconv.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/instmodsh.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/xsubpp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/zipdetails.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/json_pp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/corelist.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2usage.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podchecker.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podselect.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perldoc.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/prove.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2man.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2text.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perlpodstyle.1.bz2 symlink
* Messages for package sys-libs/glibc-2.21-r1 merged to /tmp/stage1root/:
* Defaulting /etc/host.conf:multi to on
* Messages for package dev-libs/libxml2-2.9.2-r4 merged to /tmp/stage1root/:
* Skipping XML catalog creation for stage building (bug #208887).
* Messages for package dev-lang/python-2.7.10-r1 merged to /tmp/stage1root/:
* ERROR: dev-lang/python-2.7.10-r1::gentoo failed (install phase):
* python_do* and python_new* helpers are banned in EAPIs older than 5.
*
* Call stack:
* ebuild.sh, line 93: Called src_install
* environment, line 4184: Called python_domodule 'epython.py'
* environment, line 3358: Called die
* The specific snippet of code:
* die "python_do* and python_new* helpers are banned in EAPIs older than 5.";
*
* If you need support, post the output of `emerge --info '=dev-lang/python-2.7.10-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-2.7.10-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-2.7.10-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-2.7.10-r1/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-2.7.10-r1/work/ia64-unknown-linux-gnu'
* S: '/var/tmp/portage/dev-lang/python-2.7.10-r1/work/Python-2.7.10'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage1-ia64-20151222/.catalyst_lock'
Full build log at /tmp/catalyst-auto.TRzHWU/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2015-12-15 5:04 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2015-12-15 5:04 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/urllib/request.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/urllib/response.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/urllib/robotparser.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/uu.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/uuid.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/venv'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/venv/__init__.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/venv/__main__.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/venv/scripts'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/venv/scripts/posix'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/warnings.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wave.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/weakref.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/webbrowser.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wsgiref'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wsgiref/__init__.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wsgiref/handlers.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wsgiref/headers.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wsgiref/simple_server.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wsgiref/util.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wsgiref/validate.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xdrlib.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/__init__.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/NodeFilter.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/__init__.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/domreg.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/expatbuilder.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/minicompat.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/minidom.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/pulldom.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/xmlbuilder.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/etree'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/etree/ElementInclude.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/etree/ElementPath.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/etree/ElementTree.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/etree/__init__.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/etree/cElementTree.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/parsers'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/parsers/__init__.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/parsers/expat.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/sax'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/sax/__init__.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/sax/_exceptions.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/sax/expatreader.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/sax/handler.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/sax/saxutils.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/sax/xmlreader.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xmlrpc'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xmlrpc/__init__.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xmlrpc/client.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xmlrpc/server.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/zipfile.py'...
PYTHONPATH=/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4 LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-3.4.3/work/ia64-unknown-linux-gnu \
./python -E -Wi /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/compileall.py \
-d /usr/lib/python3.4/site-packages -f \
-x badsyntax /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/site-packages
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/site-packages'...
PYTHONPATH=/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4 LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-3.4.3/work/ia64-unknown-linux-gnu \
./python -E -Wi -O /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/compileall.py \
-d /usr/lib/python3.4/site-packages -f \
-x badsyntax /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/site-packages
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/site-packages'...
PYTHONPATH=/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4 LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-3.4.3/work/ia64-unknown-linux-gnu \
./python -E -m lib2to3.pgen2.driver /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/lib2to3/Grammar.txt
Generating grammar tables from /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/lib2to3/Grammar.txt
Writing grammar tables to /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/lib2to3/Grammar3.4.3.final.0.pickle
PYTHONPATH=/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4 LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-3.4.3/work/ia64-unknown-linux-gnu \
./python -E -m lib2to3.pgen2.driver /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/lib2to3/PatternGrammar.txt
Generating grammar tables from /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/lib2to3/PatternGrammar.txt
Writing grammar tables to /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/lib2to3/PatternGrammar3.4.3.final.0.pickle
if test "xno" != "xno" ; then \
case no in \
upgrade) ensurepip="--altinstall --upgrade" ;; \
install|*) ensurepip="--altinstall" ;; \
esac; \
LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-3.4.3/work/ia64-unknown-linux-gnu ./python -E -m ensurepip \
$ensurepip --root=/var/tmp/portage/dev-lang/python-3.4.3/image// ; \
fi
* ERROR: dev-lang/python-3.4.3::gentoo failed (install phase):
* python_do* and python_new* helpers are banned in EAPIs older than 5.
*
* Call stack:
* ebuild.sh, line 93: Called src_install
* environment, line 4132: Called python_domodule 'epython.py'
* environment, line 3318: Called die
* The specific snippet of code:
* die "python_do* and python_new* helpers are banned in EAPIs older than 5.";
*
* If you need support, post the output of `emerge --info '=dev-lang/python-3.4.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-3.4.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-3.4.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-3.4.3/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-3.4.3/work/ia64-unknown-linux-gnu'
* S: '/var/tmp/portage/dev-lang/python-3.4.3/work/Python-3.4.3'
* Messages for package sys-libs/timezone-data-2015f merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package sys-apps/shadow-4.1.5.1-r1 merged to /tmp/stage1root/:
* Running 'grpck' returned errors. Please run it by hand, and then
* run 'grpconv' afterwards!
* Messages for package sys-apps/coreutils-8.23 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/less-481 merged to /tmp/stage1root/:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package app-portage/portage-utils-0.56 merged to /tmp/stage1root/:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package dev-lang/perl-5.20.2 merged to /tmp/stage1root/:
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptar.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptardiff.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptargrep.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/shasum.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/cpan.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/enc2xs.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/piconv.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/instmodsh.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/xsubpp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/zipdetails.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/json_pp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/corelist.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2usage.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podchecker.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podselect.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perldoc.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/prove.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2man.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2text.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perlpodstyle.1.bz2 symlink
* Messages for package sys-libs/glibc-2.21-r1 merged to /tmp/stage1root/:
* Defaulting /etc/host.conf:multi to on
* Messages for package dev-libs/libxml2-2.9.2-r4 merged to /tmp/stage1root/:
* Skipping XML catalog creation for stage building (bug #208887).
* Messages for package dev-lang/python-3.4.3 merged to /tmp/stage1root/:
* ERROR: dev-lang/python-3.4.3::gentoo failed (install phase):
* python_do* and python_new* helpers are banned in EAPIs older than 5.
*
* Call stack:
* ebuild.sh, line 93: Called src_install
* environment, line 4132: Called python_domodule 'epython.py'
* environment, line 3318: Called die
* The specific snippet of code:
* die "python_do* and python_new* helpers are banned in EAPIs older than 5.";
*
* If you need support, post the output of `emerge --info '=dev-lang/python-3.4.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-3.4.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-3.4.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-3.4.3/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-3.4.3/work/ia64-unknown-linux-gnu'
* S: '/var/tmp/portage/dev-lang/python-3.4.3/work/Python-3.4.3'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage1-ia64-20151215/.catalyst_lock'
Full build log at /tmp/catalyst-auto.o5CflC/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2015-12-08 5:04 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2015-12-08 5:04 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/urllib/request.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/urllib/response.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/urllib/robotparser.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/uu.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/uuid.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/venv'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/venv/__init__.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/venv/__main__.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/venv/scripts'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/venv/scripts/posix'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/warnings.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wave.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/weakref.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/webbrowser.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wsgiref'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wsgiref/__init__.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wsgiref/handlers.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wsgiref/headers.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wsgiref/simple_server.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wsgiref/util.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wsgiref/validate.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xdrlib.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/__init__.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/NodeFilter.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/__init__.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/domreg.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/expatbuilder.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/minicompat.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/minidom.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/pulldom.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/xmlbuilder.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/etree'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/etree/ElementInclude.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/etree/ElementPath.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/etree/ElementTree.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/etree/__init__.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/etree/cElementTree.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/parsers'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/parsers/__init__.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/parsers/expat.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/sax'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/sax/__init__.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/sax/_exceptions.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/sax/expatreader.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/sax/handler.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/sax/saxutils.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/sax/xmlreader.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xmlrpc'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xmlrpc/__init__.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xmlrpc/client.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xmlrpc/server.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/zipfile.py'...
PYTHONPATH=/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4 LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-3.4.3/work/ia64-unknown-linux-gnu \
./python -E -Wi /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/compileall.py \
-d /usr/lib/python3.4/site-packages -f \
-x badsyntax /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/site-packages
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/site-packages'...
PYTHONPATH=/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4 LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-3.4.3/work/ia64-unknown-linux-gnu \
./python -E -Wi -O /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/compileall.py \
-d /usr/lib/python3.4/site-packages -f \
-x badsyntax /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/site-packages
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/site-packages'...
PYTHONPATH=/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4 LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-3.4.3/work/ia64-unknown-linux-gnu \
./python -E -m lib2to3.pgen2.driver /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/lib2to3/Grammar.txt
Generating grammar tables from /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/lib2to3/Grammar.txt
Writing grammar tables to /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/lib2to3/Grammar3.4.3.final.0.pickle
PYTHONPATH=/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4 LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-3.4.3/work/ia64-unknown-linux-gnu \
./python -E -m lib2to3.pgen2.driver /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/lib2to3/PatternGrammar.txt
Generating grammar tables from /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/lib2to3/PatternGrammar.txt
Writing grammar tables to /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/lib2to3/PatternGrammar3.4.3.final.0.pickle
if test "xno" != "xno" ; then \
case no in \
upgrade) ensurepip="--altinstall --upgrade" ;; \
install|*) ensurepip="--altinstall" ;; \
esac; \
LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-3.4.3/work/ia64-unknown-linux-gnu ./python -E -m ensurepip \
$ensurepip --root=/var/tmp/portage/dev-lang/python-3.4.3/image// ; \
fi
* ERROR: dev-lang/python-3.4.3::gentoo failed (install phase):
* python_do* and python_new* helpers are banned in EAPIs older than 5.
*
* Call stack:
* ebuild.sh, line 93: Called src_install
* environment, line 4132: Called python_domodule 'epython.py'
* environment, line 3318: Called die
* The specific snippet of code:
* die "python_do* and python_new* helpers are banned in EAPIs older than 5.";
*
* If you need support, post the output of `emerge --info '=dev-lang/python-3.4.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-3.4.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-3.4.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-3.4.3/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-3.4.3/work/ia64-unknown-linux-gnu'
* S: '/var/tmp/portage/dev-lang/python-3.4.3/work/Python-3.4.3'
* Messages for package sys-libs/timezone-data-2015f merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package sys-apps/shadow-4.1.5.1-r1 merged to /tmp/stage1root/:
* Running 'grpck' returned errors. Please run it by hand, and then
* run 'grpconv' afterwards!
* Messages for package sys-apps/coreutils-8.23 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/less-481 merged to /tmp/stage1root/:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package app-portage/portage-utils-0.56 merged to /tmp/stage1root/:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package dev-lang/perl-5.20.2 merged to /tmp/stage1root/:
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptar.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptardiff.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptargrep.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/shasum.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/cpan.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/enc2xs.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/piconv.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/instmodsh.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/xsubpp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/zipdetails.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/json_pp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/corelist.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2usage.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podchecker.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podselect.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perldoc.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/prove.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2man.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2text.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perlpodstyle.1.bz2 symlink
* Messages for package sys-libs/glibc-2.21-r1 merged to /tmp/stage1root/:
* Defaulting /etc/host.conf:multi to on
* Messages for package dev-libs/libxml2-2.9.2-r4 merged to /tmp/stage1root/:
* Skipping XML catalog creation for stage building (bug #208887).
* Messages for package dev-lang/python-3.4.3 merged to /tmp/stage1root/:
* ERROR: dev-lang/python-3.4.3::gentoo failed (install phase):
* python_do* and python_new* helpers are banned in EAPIs older than 5.
*
* Call stack:
* ebuild.sh, line 93: Called src_install
* environment, line 4132: Called python_domodule 'epython.py'
* environment, line 3318: Called die
* The specific snippet of code:
* die "python_do* and python_new* helpers are banned in EAPIs older than 5.";
*
* If you need support, post the output of `emerge --info '=dev-lang/python-3.4.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-3.4.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-3.4.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-3.4.3/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-3.4.3/work/ia64-unknown-linux-gnu'
* S: '/var/tmp/portage/dev-lang/python-3.4.3/work/Python-3.4.3'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage1-ia64-20151208/.catalyst_lock'
Full build log at /tmp/catalyst-auto.mmOkWI/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2015-12-01 5:04 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2015-12-01 5:04 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/unittest/test/test_runner.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/unittest/test/test_setups.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/unittest/test/test_skipping.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/unittest/test/test_suite.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/unittest/util.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/urllib.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/urllib2.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/urlparse.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/user.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/uu.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/uuid.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/warnings.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/wave.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/weakref.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/webbrowser.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/whichdb.py ...
Listing /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/wsgiref ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/wsgiref/__init__.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/wsgiref/handlers.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/wsgiref/headers.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/wsgiref/simple_server.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/wsgiref/util.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/wsgiref/validate.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xdrlib.py ...
Listing /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/__init__.py ...
Listing /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/dom ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/dom/NodeFilter.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/dom/__init__.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/dom/domreg.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/dom/expatbuilder.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/dom/minicompat.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/dom/minidom.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/dom/pulldom.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/dom/xmlbuilder.py ...
Listing /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/etree ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/etree/ElementInclude.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/etree/ElementPath.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/etree/ElementTree.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/etree/__init__.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/etree/cElementTree.py ...
Listing /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/parsers ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/parsers/__init__.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/parsers/expat.py ...
Listing /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/sax ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/sax/__init__.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/sax/_exceptions.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/sax/expatreader.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/sax/handler.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/sax/saxutils.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xml/sax/xmlreader.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xmllib.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/xmlrpclib.py ...
Compiling /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/zipfile.py ...
PYTHONPATH=/var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7 LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-2.7.10-r1/work/ia64-unknown-linux-gnu \
./python -E -Wi -t /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/compileall.py \
-d /usr/lib/python2.7/site-packages -f \
-x badsyntax /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/site-packages
Listing /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/site-packages ...
PYTHONPATH=/var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7 LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-2.7.10-r1/work/ia64-unknown-linux-gnu \
./python -E -Wi -t -O /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/compileall.py \
-d /usr/lib/python2.7/site-packages -f \
-x badsyntax /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/site-packages
Listing /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/site-packages ...
PYTHONPATH=/var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7 LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-2.7.10-r1/work/ia64-unknown-linux-gnu \
./python -E -m lib2to3.pgen2.driver /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/lib2to3/Grammar.txt
Generating grammar tables from /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/lib2to3/Grammar.txt
Writing grammar tables to /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/lib2to3/Grammar2.7.10.final.0.pickle
PYTHONPATH=/var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7 LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-2.7.10-r1/work/ia64-unknown-linux-gnu \
./python -E -m lib2to3.pgen2.driver /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/lib2to3/PatternGrammar.txt
Generating grammar tables from /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/lib2to3/PatternGrammar.txt
Writing grammar tables to /var/tmp/portage/dev-lang/python-2.7.10-r1/image//usr/lib/python2.7/lib2to3/PatternGrammar2.7.10.final.0.pickle
if test "xno" != "xno" ; then \
case no in \
upgrade) ensurepip="--altinstall --upgrade --no-default-pip" ;; \
install|*) ensurepip="--altinstall --no-default-pip" ;; \
esac; \
LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-2.7.10-r1/work/ia64-unknown-linux-gnu ./python -E -m ensurepip \
$ensurepip --root=/var/tmp/portage/dev-lang/python-2.7.10-r1/image// ; \
fi
* ERROR: dev-lang/python-2.7.10-r1::gentoo failed (install phase):
* python_do* and python_new* helpers are banned in EAPIs older than 5.
*
* Call stack:
* ebuild.sh, line 93: Called src_install
* environment, line 4184: Called python_domodule 'epython.py'
* environment, line 3358: Called die
* The specific snippet of code:
* die "python_do* and python_new* helpers are banned in EAPIs older than 5.";
*
* If you need support, post the output of `emerge --info '=dev-lang/python-2.7.10-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-2.7.10-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-2.7.10-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-2.7.10-r1/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-2.7.10-r1/work/ia64-unknown-linux-gnu'
* S: '/var/tmp/portage/dev-lang/python-2.7.10-r1/work/Python-2.7.10'
* Messages for package sys-libs/timezone-data-2015f merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package sys-apps/shadow-4.1.5.1-r1 merged to /tmp/stage1root/:
* Running 'grpck' returned errors. Please run it by hand, and then
* run 'grpconv' afterwards!
* Messages for package sys-apps/coreutils-8.23 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/less-481 merged to /tmp/stage1root/:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package app-portage/portage-utils-0.56 merged to /tmp/stage1root/:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package dev-lang/perl-5.20.2 merged to /tmp/stage1root/:
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptar.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptardiff.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptargrep.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/shasum.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/cpan.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/enc2xs.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/piconv.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/instmodsh.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/xsubpp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/zipdetails.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/json_pp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/corelist.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2usage.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podchecker.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podselect.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perldoc.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/prove.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2man.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2text.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perlpodstyle.1.bz2 symlink
* Messages for package sys-libs/glibc-2.21-r1 merged to /tmp/stage1root/:
* Defaulting /etc/host.conf:multi to on
* Messages for package dev-libs/libxml2-2.9.2-r4 merged to /tmp/stage1root/:
* Skipping XML catalog creation for stage building (bug #208887).
* Messages for package dev-lang/python-2.7.10-r1 merged to /tmp/stage1root/:
* ERROR: dev-lang/python-2.7.10-r1::gentoo failed (install phase):
* python_do* and python_new* helpers are banned in EAPIs older than 5.
*
* Call stack:
* ebuild.sh, line 93: Called src_install
* environment, line 4184: Called python_domodule 'epython.py'
* environment, line 3358: Called die
* The specific snippet of code:
* die "python_do* and python_new* helpers are banned in EAPIs older than 5.";
*
* If you need support, post the output of `emerge --info '=dev-lang/python-2.7.10-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-2.7.10-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-2.7.10-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-2.7.10-r1/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-2.7.10-r1/work/ia64-unknown-linux-gnu'
* S: '/var/tmp/portage/dev-lang/python-2.7.10-r1/work/Python-2.7.10'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage1-ia64-20151201/.catalyst_lock'
Full build log at /tmp/catalyst-auto.zuY5xy/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2015-03-24 4:56 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2015-03-24 4:56 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Cleaning up invalid snapshot cache at
/home/catalyst/snapshot_cache/20150324/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: XATTR support is not available
tar: SELinux support is not available
lockfile does not exist '/home/catalyst/snapshot_cache/20150324/.catalyst_lock'
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /home/catalyst/tmp/default/stage1-ia64-20150324///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/catalyst/tmp/default/stage1-ia64-20150324//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/stage1-ia64-20150324//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /home/catalyst/tmp/default/stage1-ia64-20150324/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Verifying ebuild manifests
>>> Emerging (1 of 3) sys-libs/timezone-data-2015a::gentoo
>>> Installing (1 of 3) sys-libs/timezone-data-2015a::gentoo
>>> Emerging (2 of 3) sys-libs/glibc-2.19-r1::gentoo
>>> Installing (2 of 3) sys-libs/glibc-2.19-r1::gentoo
>>> Emerging (3 of 3) sys-devel/gcc-4.7.3-r1::gentoo
>>> Installing (3 of 3) sys-devel/gcc-4.7.3-r1::gentoo
>>> Recording sys-devel/gcc in "world" favorites file...
* Messages for package sys-libs/timezone-data-2015a:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-libs/glibc-2.19-r1:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-devel/gcc-4.7.3-r1:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* http://www.gentoo.org/doc/en/gcc-upgrading.xml
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep virtual/shadow virtual/pkgconfig sys-devel/binutils app-shells/bash sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r3 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20140728 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.0.8 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2015a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-3-r3 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.4.2-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.0-r3 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-9 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-5.1.3-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.21 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.6-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-0.8.1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20130513023548 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-458 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.53 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.2-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.4.3 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.24-r3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-3.16 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.1-r4 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.13.4 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.19-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.2_p5-r1 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.2_p53 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.3.6 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.9-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.3.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.14 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.19 to /tmp/stage1root/
[ebuild N ] app-admin/python-updater-0.11 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.16 to /tmp/stage1root/
[ebuild N ] virtual/libc-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.7.3-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.3 to /tmp/stage1root/
[blocks B ] <sys-devel/libtool-2.4.3-r2:2 ("<sys-devel/libtool-2.4.3-r2:2" is blocking dev-libs/libltdl-2.4.6)
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
(dev-libs/libltdl-2.4.6:0/0::gentoo, ebuild scheduled for merge) pulled in by
dev-libs/libltdl:0 required by (sys-devel/libtool-2.4.6:2/2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
(sys-devel/libtool-2.4.2-r1:2/2::gentoo, installed) pulled in by
>=sys-devel/libtool-2.4 required by (net-misc/wget-1.16:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
>=sys-devel/libtool-2.4 required by (dev-libs/libxml2-2.9.2:2/2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage1-ia64-20150324/.catalyst_lock'
Full build log at /tmp/catalyst-auto.GXMQ8E/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2015-03-17 3:38 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2015-03-17 3:38 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /home/catalyst/tmp/default/.autoresume-stage1-ia64-20150317/
clearing chroot ...
Emptying directory /home/catalyst/tmp/default/stage1-ia64-20150317/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /home/catalyst/tmp/default/.autoresume-stage1-ia64-20150317/
Emptying directory /home/catalyst/tmp/default/stage1-ia64-20150317/
Starting tar extract from /home/catalyst/builds/default/stage3-ia64-latest.tar.bz2
to /home/catalyst/tmp/default/stage1-ia64-20150317/ (This may take some time) ...
tar: XATTR support is not available
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/home/catalyst/snapshot_cache/20150317/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: XATTR support is not available
tar: SELinux support is not available
lockfile does not exist '/home/catalyst/snapshot_cache/20150317/.catalyst_lock'
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /home/catalyst/tmp/default/stage1-ia64-20150317///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/catalyst/tmp/default/stage1-ia64-20150317//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/stage1-ia64-20150317//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /home/catalyst/tmp/default/stage1-ia64-20150317/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep virtual/shadow virtual/pkgconfig sys-devel/binutils app-shells/bash sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r3 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20140728 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.0.8 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2014j to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-3-r3 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.4.2-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.0-r3 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-9 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-5.1.3-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.21 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.6-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-0.8.1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20130513023548 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-458 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.4
[ebuild N ] dev-libs/libltdl-2.4.4 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.53 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.2-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.4.3 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.24-r3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-3.16 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.1-r4 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.13.4 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.19-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.2_p5-r1 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.2_p53 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.3.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.9-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.3.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.14 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.19 to /tmp/stage1root/
[ebuild N ] app-admin/python-updater-0.11 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.16 to /tmp/stage1root/
[ebuild N ] virtual/libc-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.7.3-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.3 to /tmp/stage1root/
[blocks B ] <sys-devel/libtool-2.4.3-r2:2 ("<sys-devel/libtool-2.4.3-r2:2" is blocking dev-libs/libltdl-2.4.4)
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
(dev-libs/libltdl-2.4.4:0/0::gentoo, ebuild scheduled for merge) pulled in by
dev-libs/libltdl:0 required by (sys-devel/libtool-2.4.4:2/2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
(sys-devel/libtool-2.4.2-r1:2/2::gentoo, installed) pulled in by
>=sys-devel/libtool-2.4 required by (app-editors/nano-2.3.2:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
>=sys-devel/libtool-2.4 required by (dev-libs/libxml2-2.9.2:2/2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
>=sys-devel/libtool-2.4 required by (net-misc/wget-1.16:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage1-ia64-20150317/.catalyst_lock'
Full build log at /tmp/catalyst-auto.bQWbam/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2015-02-03 4:58 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2015-02-03 4:58 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/descrobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/dictobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/dtoa.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/dynamic_annotations.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/enumobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/errcode.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/eval.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/fileobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/fileutils.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/floatobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/frameobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/funcobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/genobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/graminit.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/grammar.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/import.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/intrcheck.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/iterobject.h /usr/include/python3.3
Traceback (most recent call last):
File "/var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Lib/runpy.py", line 160, in _run_module_as_main
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/listobject.h /usr/include/python3.3
"__main__", fname, loader, pkg_name)
File "/var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Lib/runpy.py", line 73, in _run_code
exec(code, run_globals)
File "/var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Lib/sysconfig.py", line 721, in <module>
_main()
File "/var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Lib/sysconfig.py", line 709, in _main
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/longintrepr.h /usr/include/python3.3
_generate_posix_vars()
File "/var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Lib/sysconfig.py", line 414, in _generate_posix_vars
os.makedirs(pybuilddir, exist_ok=True)
File "/var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Lib/os.py", line 269, in makedirs
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/longobject.h /usr/include/python3.3
mkdir(name, mode)
FileExistsError: [Errno 17] File exists (mode 777 != expected mode 755): 'build/lib.linux-ia64-3.3'
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/marshal.h /usr/include/python3.3
Makefile:502: recipe for target 'pybuilddir.txt' failed
make: *** [pybuilddir.txt] Error 1
make: *** Waiting for unfinished jobs....
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/memoryobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/metagrammar.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/methodobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/modsupport.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/moduleobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/namespaceobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/node.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/object.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/objimpl.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/opcode.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/osdefs.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/parsetok.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/patchlevel.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pgen.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pgenheaders.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/py_curses.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pyarena.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pyatomic.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pycapsule.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pyctype.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pydebug.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pyerrors.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pyexpat.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pyfpe.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pygetopt.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pymacconfig.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pymacro.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pymath.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pymem.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pyport.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pystate.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pystrcmp.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pystrtod.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pythonrun.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pythread.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pytime.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/rangeobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/setobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/sliceobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/structmember.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/structseq.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/symtable.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/sysmodule.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/token.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/traceback.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/tupleobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/typeslots.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/ucnhash.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/unicodeobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/warnings.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/weakrefobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 pyconfig.h /var/tmp/portage/dev-lang/python-3.3.5-r1/image//usr/include/python3.3/pyconfig.h
* ERROR: dev-lang/python-3.3.5-r1::gentoo failed (install phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=dev-lang/python-3.3.5-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-3.3.5-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-3.3.5-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-3.3.5-r1/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-3.3.5-r1/work/ia64-unknown-linux-gnu'
* S: '/var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5'
* Messages for package sys-libs/timezone-data-2014i-r1 merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package sys-apps/shadow-4.1.5.1-r1 merged to /tmp/stage1root/:
* Running 'grpck' returned errors. Please run it by hand, and then
* run 'grpconv' afterwards!
* Messages for package sys-apps/coreutils-8.21 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/less-458 merged to /tmp/stage1root/:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package app-portage/portage-utils-0.53 merged to /tmp/stage1root/:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package dev-lang/perl-5.18.2-r2 merged to /tmp/stage1root/:
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptar.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptardiff.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptargrep.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/shasum.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/cpan.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/cpanp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/cpan2dist.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/enc2xs.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/piconv.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/instmodsh.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/xsubpp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/zipdetails.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/json_pp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/config_data.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/corelist.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2usage.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podchecker.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podselect.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perldoc.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/prove.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2man.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2text.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perlpodstyle.1.bz2 symlink
* Messages for package sys-libs/glibc-2.19-r1 merged to /tmp/stage1root/:
* Defaulting /etc/host.conf:multi to on
* Messages for package dev-libs/libxml2-2.9.2 merged to /tmp/stage1root/:
* Skipping XML catalog creation for stage building (bug #208887).
* Messages for package dev-lang/python-3.3.5-r1 merged to /tmp/stage1root/:
* ERROR: dev-lang/python-3.3.5-r1::gentoo failed (install phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=dev-lang/python-3.3.5-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-3.3.5-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-3.3.5-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-3.3.5-r1/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-3.3.5-r1/work/ia64-unknown-linux-gnu'
* S: '/var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage1-ia64-20150203/.catalyst_lock'
Full build log at /tmp/catalyst-auto.LWyOpB/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2015-01-27 5:06 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2015-01-27 5:06 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/descrobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/dictobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/dtoa.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/dynamic_annotations.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/enumobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/errcode.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/eval.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/fileobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/fileutils.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/floatobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/frameobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/funcobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/genobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/graminit.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/grammar.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/import.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/intrcheck.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/iterobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/listobject.h /usr/include/python3.3
Traceback (most recent call last):
File "/var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Lib/runpy.py", line 160, in _run_module_as_main
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/longintrepr.h /usr/include/python3.3
"__main__", fname, loader, pkg_name)
File "/var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Lib/runpy.py", line 73, in _run_code
exec(code, run_globals)
File "/var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Lib/sysconfig.py", line 721, in <module>
_main()
File "/var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Lib/sysconfig.py", line 709, in _main
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/longobject.h /usr/include/python3.3
_generate_posix_vars()
File "/var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Lib/sysconfig.py", line 414, in _generate_posix_vars
os.makedirs(pybuilddir, exist_ok=True)
File "/var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Lib/os.py", line 269, in makedirs
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/marshal.h /usr/include/python3.3
mkdir(name, mode)
FileExistsError: [Errno 17] File exists (mode 777 != expected mode 755): 'build/lib.linux-ia64-3.3'
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/memoryobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/metagrammar.h /usr/include/python3.3
Makefile:502: recipe for target 'pybuilddir.txt' failed
make: *** [pybuilddir.txt] Error 1
make: *** Waiting for unfinished jobs....
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/methodobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/modsupport.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/moduleobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/namespaceobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/node.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/object.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/objimpl.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/opcode.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/osdefs.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/parsetok.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/patchlevel.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pgen.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pgenheaders.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/py_curses.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pyarena.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pyatomic.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pycapsule.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pyctype.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pydebug.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pyerrors.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pyexpat.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pyfpe.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pygetopt.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pymacconfig.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pymacro.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pymath.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pymem.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pyport.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pystate.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pystrcmp.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pystrtod.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pythonrun.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pythread.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pytime.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/rangeobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/setobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/sliceobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/structmember.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/structseq.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/symtable.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/sysmodule.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/token.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/traceback.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/tupleobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/typeslots.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/ucnhash.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/unicodeobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/warnings.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/weakrefobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 pyconfig.h /var/tmp/portage/dev-lang/python-3.3.5-r1/image//usr/include/python3.3/pyconfig.h
* ERROR: dev-lang/python-3.3.5-r1::gentoo failed (install phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=dev-lang/python-3.3.5-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-3.3.5-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-3.3.5-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-3.3.5-r1/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-3.3.5-r1/work/ia64-unknown-linux-gnu'
* S: '/var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5'
* Messages for package sys-libs/timezone-data-2014i-r1 merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package sys-apps/shadow-4.1.5.1-r1 merged to /tmp/stage1root/:
* Running 'grpck' returned errors. Please run it by hand, and then
* run 'grpconv' afterwards!
* Messages for package sys-apps/coreutils-8.21 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/less-458 merged to /tmp/stage1root/:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package app-portage/portage-utils-0.53 merged to /tmp/stage1root/:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package dev-lang/perl-5.18.2-r2 merged to /tmp/stage1root/:
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptar.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptardiff.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptargrep.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/shasum.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/cpan.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/cpanp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/cpan2dist.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/enc2xs.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/piconv.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/instmodsh.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/xsubpp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/zipdetails.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/json_pp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/config_data.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/corelist.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2usage.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podchecker.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podselect.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perldoc.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/prove.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2man.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2text.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perlpodstyle.1.bz2 symlink
* Messages for package sys-libs/glibc-2.19-r1 merged to /tmp/stage1root/:
* Defaulting /etc/host.conf:multi to on
* Messages for package dev-libs/libxml2-2.9.2 merged to /tmp/stage1root/:
* Skipping XML catalog creation for stage building (bug #208887).
* Messages for package dev-lang/python-3.3.5-r1 merged to /tmp/stage1root/:
* ERROR: dev-lang/python-3.3.5-r1::gentoo failed (install phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=dev-lang/python-3.3.5-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-3.3.5-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-3.3.5-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-3.3.5-r1/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-3.3.5-r1/work/ia64-unknown-linux-gnu'
* S: '/var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage1-ia64-20150127/.catalyst_lock'
Full build log at /tmp/catalyst-auto.JBPoNm/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2015-01-20 5:00 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2015-01-20 5:00 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/descrobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/dictobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/dtoa.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/dynamic_annotations.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/enumobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/errcode.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/eval.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/fileobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/fileutils.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/floatobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/frameobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/funcobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/genobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/graminit.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/grammar.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/import.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/intrcheck.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/iterobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/listobject.h /usr/include/python3.3
Traceback (most recent call last):
File "/var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Lib/runpy.py", line 160, in _run_module_as_main
"__main__", fname, loader, pkg_name)
File "/var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Lib/runpy.py", line 73, in _run_code
exec(code, run_globals)
File "/var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Lib/sysconfig.py", line 721, in <module>
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/longintrepr.h /usr/include/python3.3
_main()
File "/var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Lib/sysconfig.py", line 709, in _main
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/longobject.h /usr/include/python3.3
_generate_posix_vars()
File "/var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Lib/sysconfig.py", line 414, in _generate_posix_vars
os.makedirs(pybuilddir, exist_ok=True)
File "/var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Lib/os.py", line 269, in makedirs
mkdir(name, mode)
FileExistsError: [Errno 17] File exists (mode 777 != expected mode 755): 'build/lib.linux-ia64-3.3'
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/marshal.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/memoryobject.h /usr/include/python3.3
Makefile:502: recipe for target 'pybuilddir.txt' failed
make: *** [pybuilddir.txt] Error 1
make: *** Waiting for unfinished jobs....
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/metagrammar.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/methodobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/modsupport.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/moduleobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/namespaceobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/node.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/object.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/objimpl.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/opcode.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/osdefs.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/parsetok.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/patchlevel.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pgen.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pgenheaders.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/py_curses.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pyarena.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pyatomic.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pycapsule.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pyctype.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pydebug.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pyerrors.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pyexpat.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pyfpe.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pygetopt.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pymacconfig.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pymacro.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pymath.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pymem.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pyport.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pystate.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pystrcmp.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pystrtod.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pythonrun.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pythread.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/pytime.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/rangeobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/setobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/sliceobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/structmember.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/structseq.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/symtable.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/sysmodule.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/token.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/traceback.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/tupleobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/typeslots.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/ucnhash.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/unicodeobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/warnings.h /usr/include/python3.3
/usr/bin/install -c -m 644 /var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5/Include/weakrefobject.h /usr/include/python3.3
/usr/bin/install -c -m 644 pyconfig.h /var/tmp/portage/dev-lang/python-3.3.5-r1/image//usr/include/python3.3/pyconfig.h
* ERROR: dev-lang/python-3.3.5-r1::gentoo failed (install phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=dev-lang/python-3.3.5-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-3.3.5-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-3.3.5-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-3.3.5-r1/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-3.3.5-r1/work/ia64-unknown-linux-gnu'
* S: '/var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5'
* Messages for package sys-libs/timezone-data-2014i-r1 merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package sys-apps/shadow-4.1.5.1-r1 merged to /tmp/stage1root/:
* Running 'grpck' returned errors. Please run it by hand, and then
* run 'grpconv' afterwards!
* Messages for package sys-apps/coreutils-8.21 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/less-458 merged to /tmp/stage1root/:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package app-portage/portage-utils-0.53 merged to /tmp/stage1root/:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package dev-lang/perl-5.18.2-r2 merged to /tmp/stage1root/:
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptar.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptardiff.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptargrep.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/shasum.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/cpan.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/cpanp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/cpan2dist.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/enc2xs.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/piconv.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/instmodsh.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/xsubpp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/zipdetails.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/json_pp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/config_data.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/corelist.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2usage.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podchecker.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podselect.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perldoc.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/prove.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2man.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2text.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perlpodstyle.1.bz2 symlink
* Messages for package sys-libs/glibc-2.19-r1 merged to /tmp/stage1root/:
* Defaulting /etc/host.conf:multi to on
* Messages for package dev-libs/libxml2-2.9.2 merged to /tmp/stage1root/:
* Skipping XML catalog creation for stage building (bug #208887).
* Messages for package dev-lang/python-3.3.5-r1 merged to /tmp/stage1root/:
* ERROR: dev-lang/python-3.3.5-r1::gentoo failed (install phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=dev-lang/python-3.3.5-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-3.3.5-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-3.3.5-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-3.3.5-r1/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-3.3.5-r1/work/ia64-unknown-linux-gnu'
* S: '/var/tmp/portage/dev-lang/python-3.3.5-r1/work/Python-3.3.5'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage1-ia64-20150120/.catalyst_lock'
Full build log at /tmp/catalyst-auto.rbbksk/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2014-04-08 3:25 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2014-04-08 3:25 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.16
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for ia64
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-ia64-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20140408/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20140408/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-ia64-20140408/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-ia64-20140408/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20140408/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20140408/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ia64-20140408/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20140408/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ia64-20140408/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-ia64-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-ia64-20140408/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20140408/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20140408/.catalyst_lock'
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-ia64-20140408///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to ./tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-ia64-20140408/./tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-ia64-20140408/./tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-ia64-20140408/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --oneshot --nodeps --update sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.2.8-r1
>>> Failed to emerge sys-apps/portage-2.2.8-r1, Log file:
>>> '/var/tmp/portage/sys-apps/portage-2.2.8-r1/temp/build.log'
* Package: sys-apps/portage-2.2.8-r1
* Repository: gentoo
* Maintainer: dev-portage@gentoo.org
* Upstream: dev-portage@gentoo.org
* USE: build elibc_glibc ia64 ipc kernel_linux python_targets_python2_7 python_targets_python3_3 userland_GNU
* FEATURES: preserve-libs sandbox userpriv usersandbox
install: cannot change permissions of '/var/tmp/portage/sys-apps/portage-2.2.8-r1/work': No such file or directory
/var/tmp/portage/._portage_reinstall_.wPs_fd/bin/isolated-functions.sh: line 246: echo: write error: No space left on device
* ERROR: sys-apps/portage-2.2.8-r1::gentoo failed (unpack phase):
/var/tmp/portage/._portage_reinstall_.wPs_fd/bin/isolated-functions.sh: line 246: echo: write error: No space left on device
* Failed to create dir '/var/tmp/portage/sys-apps/portage-2.2.8-r1/work'
/var/tmp/portage/._portage_reinstall_.wPs_fd/bin/isolated-functions.sh: line 246: echo: write error: No space left on device
*
/var/tmp/portage/._portage_reinstall_.wPs_fd/bin/isolated-functions.sh: line 246: echo: write error: No space left on device
* Call stack:
/var/tmp/portage/._portage_reinstall_.wPs_fd/bin/isolated-functions.sh: line 246: echo: write error: No space left on device
* ebuild.sh, line 714: Called __ebuild_main 'unpack'
/var/tmp/portage/._portage_reinstall_.wPs_fd/bin/isolated-functions.sh: line 246: echo: write error: No space left on device
* phase-functions.sh, line 955: Called __dyn_unpack
/var/tmp/portage/._portage_reinstall_.wPs_fd/bin/isolated-functions.sh: line 246: echo: write error: No space left on device
* phase-functions.sh, line 240: Called die
/var/tmp/portage/._portage_reinstall_.wPs_fd/bin/isolated-functions.sh: line 246: echo: write error: No space left on device
* The specific snippet of code:
/var/tmp/portage/._portage_reinstall_.wPs_fd/bin/isolated-functions.sh: line 246: echo: write error: No space left on device
* install -m${PORTAGE_WORKDIR_MODE:-0700} -d "${WORKDIR}" || die "Failed to create dir '${WORKDIR}'"
/var/tmp/portage/._portage_reinstall_.wPs_fd/bin/isolated-functions.sh: line 246: echo: write error: No space left on device
*
/var/tmp/portage/._portage_reinstall_.wPs_fd/bin/isolated-functions.sh: line 246: echo: write error: No space left on device
* If you need support, post the output of `emerge --info '=sys-apps/portage-2.2.8-r1::gentoo'`,
/var/tmp/portage/._portage_reinstall_.wPs_fd/bin/isolated-functions.sh: line 246: echo: write error: No space left on device
* the complete build log and the output of `emerge -pqv '=sys-apps/portage-2.2.8-r1::gentoo'`.
/var/tmp/portage/._portage_reinstall_.wPs_fd/bin/isolated-functions.sh: line 246: echo: write error: No space left on device
* The complete build log is located at '/var/tmp/portage/sys-apps/portage-2.2.8-r1/temp/build.log'.
/var/tmp/portage/._portage_reinstall_.wPs_fd/bin/isolated-functions.sh: line 246: echo: write error: No space left on device
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/portage-2.2.8-r1/temp/environment'.
/var/tmp/portage/._portage_reinstall_.wPs_fd/bin/isolated-functions.sh: line 246: echo: write error: No space left on device
* Working directory: '/var/tmp/portage/._portage_reinstall_.wPs_fd/pym'
/var/tmp/portage/._portage_reinstall_.wPs_fd/bin/isolated-functions.sh: line 246: echo: write error: No space left on device
* S: '/var/tmp/portage/sys-apps/portage-2.2.8-r1/work/portage-2.2.8'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1243, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1303, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1248, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20140408/.catalyst_lock'
Full build log at /tmp/catalyst-auto.32528/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2014-01-28 3:44 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2014-01-28 3:44 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: ./sbin/ipmaddr: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/nologin: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/debugfs: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/resize2fs: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/chcpu: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/ctrlaltdel: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/logsave: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/mkswap: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/rc-update: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/rarp: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/rc: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/rmmod: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/fstrim: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/cfdisk: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/swaplabel: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/iptunnel: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/e2undo: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/blkid: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/pam_timestamp_check: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/e2fsck: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/fsck.cramfs: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/unix_chkpwd: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/mkfs.ext4: Cannot hard link to `./sbin/mkfs.ext4dev': No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/mkfs.bfs: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/fstab-decode: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/swapoff: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/losetup: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/installkernel: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/halt: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/plipconfig: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/agetty: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/e2label: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/arping: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/modprobe: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/blockdev: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/bootlogd: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/fsck.ext4dev: Cannot hard link to `./sbin/e2fsck': No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/sysctl: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/swapon: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/fsck.ext4: Cannot hard link to `./sbin/e2fsck': No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/mkfs: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/raw: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/ldconfig: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/rc-service: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/fsck.ext2: Cannot hard link to `./sbin/e2fsck': No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/mkfs.minix: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/nameif: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/modinfo: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/tune2fs: Cannot hard link to `./sbin/e2label': No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/telinit: Cannot create symlink to `init': No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/init: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/reboot: Cannot create symlink to `halt': No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/start-stop-daemon: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/mkhomedir_helper: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/fsfreeze: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/lsmod: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/hwclock: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/mke2fs: Cannot hard link to `./sbin/mkfs.ext4dev': No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/pivot_root: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/pam_tally2: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/poweroff: Cannot create symlink to `halt': No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/slattach: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/mkfs.ext2: Cannot hard link to `./sbin/mkfs.ext4dev': No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/fsck.ext3: Cannot hard link to `./sbin/e2fsck': No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/depmod: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/runlevel: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/pam_tally: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/fsck: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/e2image: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/mii-tool: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/fsck.minix: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/insmod: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/switch_root: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/mkfs.ext3: Cannot hard link to `./sbin/mkfs.ext4dev': No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc: Cannot mkdir: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc/started: Cannot mkdir: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc/stopping: Cannot mkdir: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc/daemons: Cannot mkdir: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc/exclusive: Cannot mkdir: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc/tmp: Cannot mkdir: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc/starting: Cannot mkdir: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc/failed: Cannot mkdir: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc/deptree: Cannot open: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc/wasinactive: Cannot mkdir: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc/depconfig: Cannot open: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc/scheduled: Cannot mkdir: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc/inactive: Cannot mkdir: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc/options: Cannot mkdir: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc/hotplugged: Cannot mkdir: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/.keep: Cannot open: No such file or directory
tar: ./sys: Cannot mkdir: No space left on device
tar: ./sys: Cannot mkdir: No space left on device
tar: ./sys/.keep: Cannot open: No such file or directory
tar: Exiting with failure status due to previous errors
!!! catalyst: Tarball extraction of /var/tmp/catalyst/builds/default/stage3-ia64-2008.0.tar.bz2 to /var/tmp/catalyst/tmp/default/stage1-ia64-20140128/ failed.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 226, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1295, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 752, in unpack
cmd(unpack_cmd,error_msg,env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20140128/.catalyst_lock'
Full build log at /tmp/catalyst-auto.8020/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2014-01-21 3:48 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2014-01-21 3:48 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxrandr/ChangeLog: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxrandr/Manifest: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/metadata.xml: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxappearance: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxappearance/lxappearance-0.5.3.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxappearance/lxappearance-0.5.2.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxappearance/metadata.xml: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxappearance/files: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxappearance/files/lxappearance-0.2.1-intltool.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxappearance/files/lxappearance-0.4.0-linguas.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxappearance/ChangeLog: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxappearance/lxappearance-0.5.5.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxappearance/Manifest: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxappearance/lxappearance-0.5.4.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxsession-edit: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxsession-edit/metadata.xml: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxsession-edit/ChangeLog: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxsession-edit/Manifest: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxsession-edit/lxsession-edit-0.2.0.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/lxdm-0.4.1-r7.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/metadata.xml: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/lxdm-0.4.1-r5.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/files: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/files/lxdm-0.4.1-fix-optional-pam.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/files/lxdm-0.4.1-fix-pam-100-cpu.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/files/lxdm-0.4.1-git-fix-null-pointer-deref.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/files/lxdm-0.4.1-optional-consolekit.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/files/lxdm-0.4.1-pam_console-disable.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/files/lxdm-0.4.1-missing-pam-defines.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/files/lxdm-0.3.0-properly-load-session-settings-using-dmrc-entry-as-pointer-for-xsessions-dir-file.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/files/lxdm-0.4.1-event-check.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/files/lxdm.service: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/files/lxdm-0.4.1-pam-use-system-local-login.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/files/lxdm-0.4.1-configure-add-pam.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/files/lxdm-0.3.0-pam_console-disable.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/files/lxdm-0.4.1-selinux-support.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/files/lxdm-0.3.0-consolekit-disable.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/lxdm-0.4.1-r8.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/ChangeLog: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/Manifest: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/lxdm-0.4.1-r9.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxlauncher: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxlauncher/lxlauncher-0.2.2.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxlauncher/metadata.xml: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxlauncher/files: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxlauncher/files/lxlauncher-0.2.1-intltool.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxlauncher/files/lxlauncher-0.2.1-fix-segfault.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxlauncher/ChangeLog: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxlauncher/lxlauncher-0.2.1-r1.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxlauncher/Manifest: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxlauncher/lxlauncher-0.2.1.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxsession: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxsession/metadata.xml: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxsession/files: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxsession/files/lxsession-0.4.9.2-makefile.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxsession/files/lxsession-0.4.9.2-fix-logind-dbus-calls.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxsession/files/lxsession-0.4.9.2-configure.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxsession/lxsession-0.4.9.2-r2.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxsession/lxsession-0.4.9.2-r1.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxsession/ChangeLog: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxsession/lxsession-0.4.9.2-r3.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxsession/lxsession-0.4.9.2.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxsession/Manifest: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxsession/lxsession-0.4.6.1.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxmenu-data: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxmenu-data/lxmenu-data-0.1.2.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxmenu-data/metadata.xml: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxmenu-data/ChangeLog: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxmenu-data/Manifest: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/menu-cache: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/menu-cache/menu-cache-0.5.1.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/menu-cache/metadata.xml: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/menu-cache/menu-cache-0.4.1.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/menu-cache/ChangeLog: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/menu-cache/Manifest: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/menu-cache/menu-cache-0.3.3.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxpanel: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxpanel/lxpanel-0.6.1.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxpanel/metadata.xml: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxpanel/files: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxpanel/files/lxpanel-0.5.9-libwnck-check.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxpanel/files/lxpanel-0.5.9-sandbox.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxpanel/ChangeLog: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxpanel/Manifest: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxpanel/lxpanel-0.5.12.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxappearance-obconf: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxappearance-obconf/metadata.xml: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxappearance-obconf/ChangeLog: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxappearance-obconf/lxappearance-obconf-0.2.1.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxappearance-obconf/Manifest: Cannot open: No such file or directory
tar: Exiting with failure status due to previous errors
!!! catalyst: Error unpacking snapshot
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 226, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1295, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 821, in unpack_snapshot
cmd(unpack_cmd,unpack_errmsg,env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20140121/.catalyst_lock'
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20140121/.catalyst_lock'
Full build log at /tmp/catalyst-auto.8716/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2014-01-14 19:06 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2014-01-14 19:06 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
checking for resizeterm... yes
checking for /dev/ptmx... yes
checking for /dev/ptc... no
checking for %lld and %llu printf() format support... yes
checking for %zd printf() format support... yes
checking for socklen_t... yes
checking for broken mbstowcs... no
checking whether ia64-unknown-linux-gnu-gcc -pthread supports computed gotos... yes
checking for --with-computed-gotos... yes
checking for pipe2... yes
checking for build directories... done
configure: creating ./config.status
config.status: creating Makefile.pre
config.status: creating Modules/Setup.config
config.status: creating Misc/python.pc
config.status: creating Modules/ld_so_aix
config.status: creating pyconfig.h
creating Modules/Setup
creating Modules/Setup.local
creating Makefile
* configure has detected that the sem_open function is broken.
* Please ensure that /dev/shm is mounted as a tmpfs with mode 1777.
* ERROR: dev-lang/python-3.2.5-r3::gentoo failed (configure phase):
* Broken sem_open function (bug 496328)
*
* Call stack:
* ebuild.sh, line 93: Called src_configure
* environment, line 3709: Called die
* The specific snippet of code:
* die "Broken sem_open function (bug 496328)";
*
* If you need support, post the output of `emerge --info '=dev-lang/python-3.2.5-r3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-3.2.5-r3::gentoo'`.
/var/tmp/portage/._portage_reinstall_.z_r7aj/bin/isolated-functions.sh: line 188: wait: `Broken sem_open function (bug 496328)': not a pid or valid job spec
* The complete build log is located at '/var/tmp/portage/dev-lang/python-3.2.5-r3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-3.2.5-r3/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-3.2.5-r3/work/ia64-unknown-linux-gnu'
* S: '/var/tmp/portage/dev-lang/python-3.2.5-r3/work/Python-3.2.5'
* Messages for package sys-libs/glibc-2.16.0:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-libs/timezone-data-2013d:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package app-portage/portage-utils-0.41:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package sys-apps/util-linux-2.22.2:
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-devel/gcc-4.7.3-r1:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* http://www.gentoo.org/doc/en/gcc-upgrading.xml
* Messages for package sys-devel/gcc-4.6.3:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* http://www.gentoo.org/doc/en/gcc-upgrading.xml
* Messages for package sys-fs/e2fsprogs-1.42.7:
* No /etc/mtab file, creating one temporarily
* Messages for package sys-apps/coreutils-8.20:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-libs/gdbm-1.8.3-r4:
* 32bit systems might have to rebuild all gdbm databases due to
* LFS changes in the gdbm format. You can either delete the db
* and regenerate it from scratch, or use the converter:
* http://bugs.gentoo.org/attachment.cgi?id=215326
*
* See this comment for information on how to use it:
* http://bugs.gentoo.org/299390#c15
*
* You should be able to locate most gdbm db's on your system with:
* find /etc /var -type f -exec file {} + | grep 'GNU dbm 1.x or ndbm database'
*
* You could also try using this helper script:
* http://bugs.gentoo.org/attachment.cgi?id=222581
* Messages for package dev-lang/perl-5.12.4-r1:
* Removing dead symlink /usr/share/man/man1/ptar.1.bz2
* Removing dead symlink /usr/share/man/man1/ptardiff.1.bz2
* Removing dead symlink /usr/share/man/man1/shasum.1.bz2
* Removing dead symlink /usr/share/man/man1/cpan.1.bz2
* Removing dead symlink /usr/share/man/man1/cpanp.1.bz2
* Removing dead symlink /usr/share/man/man1/cpan2dist.1.bz2
* Removing dead symlink /usr/share/man/man1/enc2xs.1.bz2
* Removing dead symlink /usr/share/man/man1/piconv.1.bz2
* Removing dead symlink /usr/share/man/man1/instmodsh.1.bz2
* Removing dead symlink /usr/share/man/man1/xsubpp.1.bz2
* Removing dead symlink /usr/share/man/man1/config_data.1.bz2
* Removing dead symlink /usr/share/man/man1/corelist.1.bz2
* Removing dead symlink /usr/share/man/man1/pod2usage.1.bz2
* Removing dead symlink /usr/share/man/man1/podchecker.1.bz2
* Removing dead symlink /usr/share/man/man1/podselect.1.bz2
* Removing dead symlink /usr/share/man/man1/prove.1.bz2
* Removing dead symlink /usr/share/man/man1/pod2man.1.bz2
* Removing dead symlink /usr/share/man/man1/pod2text.1.bz2
* Messages for package dev-lang/perl-5.16.3:
* UPDATE THE PERL MODULES:
* After updating dev-lang/perl you must reinstall
* the installed perl modules.
* Use: perl-cleaner --all
* Unable to establish //usr/share/man/man1/ptar.1* symlink
* Unable to establish //usr/share/man/man1/ptardiff.1* symlink
* Unable to establish //usr/share/man/man1/ptargrep.1* symlink
* Unable to establish //usr/share/man/man1/shasum.1* symlink
* Unable to establish //usr/share/man/man1/cpan.1* symlink
* Unable to establish //usr/share/man/man1/cpanp.1* symlink
* Unable to establish //usr/share/man/man1/cpan2dist.1* symlink
* Unable to establish //usr/share/man/man1/enc2xs.1* symlink
* Unable to establish //usr/share/man/man1/piconv.1* symlink
* Unable to establish //usr/share/man/man1/instmodsh.1* symlink
* Unable to establish //usr/share/man/man1/xsubpp.1* symlink
* Unable to establish //usr/share/man/man1/zipdetails.1* symlink
* Unable to establish //usr/share/man/man1/json_pp.1* symlink
* Unable to establish //usr/share/man/man1/config_data.1* symlink
* Unable to establish //usr/share/man/man1/corelist.1* symlink
* Unable to establish //usr/share/man/man1/pod2usage.1* symlink
* Unable to establish //usr/share/man/man1/podchecker.1* symlink
* Unable to establish //usr/share/man/man1/podselect.1* symlink
* Unable to establish //usr/share/man/man1/perldoc.1* symlink
* Unable to establish //usr/share/man/man1/prove.1* symlink
* Unable to establish //usr/share/man/man1/pod2man.1* symlink
* Unable to establish //usr/share/man/man1/pod2text.1* symlink
* Unable to establish //usr/share/man/man1/perlpodstyle.1* symlink
* Messages for package dev-lang/python-3.2.5-r3:
* configure has detected that the sem_open function is broken.
* Please ensure that /dev/shm is mounted as a tmpfs with mode 1777.
* ERROR: dev-lang/python-3.2.5-r3::gentoo failed (configure phase):
* Broken sem_open function (bug 496328)
*
* Call stack:
* ebuild.sh, line 93: Called src_configure
* environment, line 3709: Called die
* The specific snippet of code:
* die "Broken sem_open function (bug 496328)";
*
* If you need support, post the output of `emerge --info '=dev-lang/python-3.2.5-r3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-3.2.5-r3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-3.2.5-r3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-3.2.5-r3/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-3.2.5-r3/work/ia64-unknown-linux-gnu'
* S: '/var/tmp/portage/dev-lang/python-3.2.5-r3/work/Python-3.2.5'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1235, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 226, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1295, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1240, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20140114/.catalyst_lock'
Full build log at /tmp/catalyst-auto.15522/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2014-01-07 18:19 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2014-01-07 18:19 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
checking for resizeterm... yes
checking for /dev/ptmx... yes
checking for /dev/ptc... no
checking for %lld and %llu printf() format support... yes
checking for %zd printf() format support... yes
checking for socklen_t... yes
checking for broken mbstowcs... no
checking whether ia64-unknown-linux-gnu-gcc -pthread supports computed gotos... yes
checking for --with-computed-gotos... yes
checking for pipe2... yes
checking for build directories... done
configure: creating ./config.status
config.status: creating Makefile.pre
config.status: creating Modules/Setup.config
config.status: creating Misc/python.pc
config.status: creating Modules/ld_so_aix
config.status: creating pyconfig.h
creating Modules/Setup
creating Modules/Setup.local
creating Makefile
* configure has detected that the sem_open function is broken.
* Please ensure that /dev/shm is mounted as a tmpfs with mode 1777.
* ERROR: dev-lang/python-3.2.5-r3::gentoo failed (configure phase):
* Broken sem_open function (bug 496328)
*
* Call stack:
* ebuild.sh, line 93: Called src_configure
* environment, line 4078: Called die
* The specific snippet of code:
* die "Broken sem_open function (bug 496328)";
*
* If you need support, post the output of `emerge --info '=dev-lang/python-3.2.5-r3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-3.2.5-r3::gentoo'`.
/var/tmp/portage/._portage_reinstall_.rk32uk/bin/isolated-functions.sh: line 188: wait: `Broken sem_open function (bug 496328)': not a pid or valid job spec
* The complete build log is located at '/var/tmp/portage/dev-lang/python-3.2.5-r3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-3.2.5-r3/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-3.2.5-r3/work/ia64-unknown-linux-gnu'
* S: '/var/tmp/portage/dev-lang/python-3.2.5-r3/work/Python-3.2.5'
* Messages for package sys-libs/glibc-2.16.0:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-libs/timezone-data-2013d:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package app-portage/portage-utils-0.30:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package sys-apps/util-linux-2.22.2:
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-devel/gcc-4.7.3-r1:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* http://www.gentoo.org/doc/en/gcc-upgrading.xml
* Messages for package sys-devel/gcc-4.6.3:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* http://www.gentoo.org/doc/en/gcc-upgrading.xml
* Messages for package sys-fs/e2fsprogs-1.42.7:
* No /etc/mtab file, creating one temporarily
* Messages for package sys-apps/coreutils-8.20:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-libs/gdbm-1.8.3-r4:
* 32bit systems might have to rebuild all gdbm databases due to
* LFS changes in the gdbm format. You can either delete the db
* and regenerate it from scratch, or use the converter:
* http://bugs.gentoo.org/attachment.cgi?id=215326
*
* See this comment for information on how to use it:
* http://bugs.gentoo.org/299390#c15
*
* You should be able to locate most gdbm db's on your system with:
* find /etc /var -type f -exec file {} + | grep 'GNU dbm 1.x or ndbm database'
*
* You could also try using this helper script:
* http://bugs.gentoo.org/attachment.cgi?id=222581
* Messages for package dev-lang/perl-5.12.4-r1:
* Removing dead symlink /usr/share/man/man1/ptar.1.bz2
* Removing dead symlink /usr/share/man/man1/ptardiff.1.bz2
* Removing dead symlink /usr/share/man/man1/shasum.1.bz2
* Removing dead symlink /usr/share/man/man1/cpan.1.bz2
* Removing dead symlink /usr/share/man/man1/cpanp.1.bz2
* Removing dead symlink /usr/share/man/man1/cpan2dist.1.bz2
* Removing dead symlink /usr/share/man/man1/enc2xs.1.bz2
* Removing dead symlink /usr/share/man/man1/piconv.1.bz2
* Removing dead symlink /usr/share/man/man1/instmodsh.1.bz2
* Removing dead symlink /usr/share/man/man1/xsubpp.1.bz2
* Removing dead symlink /usr/share/man/man1/config_data.1.bz2
* Removing dead symlink /usr/share/man/man1/corelist.1.bz2
* Removing dead symlink /usr/share/man/man1/pod2usage.1.bz2
* Removing dead symlink /usr/share/man/man1/podchecker.1.bz2
* Removing dead symlink /usr/share/man/man1/podselect.1.bz2
* Removing dead symlink /usr/share/man/man1/prove.1.bz2
* Removing dead symlink /usr/share/man/man1/pod2man.1.bz2
* Removing dead symlink /usr/share/man/man1/pod2text.1.bz2
* Messages for package dev-lang/perl-5.16.3:
* UPDATE THE PERL MODULES:
* After updating dev-lang/perl you must reinstall
* the installed perl modules.
* Use: perl-cleaner --all
* Unable to establish //usr/share/man/man1/ptar.1* symlink
* Unable to establish //usr/share/man/man1/ptardiff.1* symlink
* Unable to establish //usr/share/man/man1/ptargrep.1* symlink
* Unable to establish //usr/share/man/man1/shasum.1* symlink
* Unable to establish //usr/share/man/man1/cpan.1* symlink
* Unable to establish //usr/share/man/man1/cpanp.1* symlink
* Unable to establish //usr/share/man/man1/cpan2dist.1* symlink
* Unable to establish //usr/share/man/man1/enc2xs.1* symlink
* Unable to establish //usr/share/man/man1/piconv.1* symlink
* Unable to establish //usr/share/man/man1/instmodsh.1* symlink
* Unable to establish //usr/share/man/man1/xsubpp.1* symlink
* Unable to establish //usr/share/man/man1/zipdetails.1* symlink
* Unable to establish //usr/share/man/man1/json_pp.1* symlink
* Unable to establish //usr/share/man/man1/config_data.1* symlink
* Unable to establish //usr/share/man/man1/corelist.1* symlink
* Unable to establish //usr/share/man/man1/pod2usage.1* symlink
* Unable to establish //usr/share/man/man1/podchecker.1* symlink
* Unable to establish //usr/share/man/man1/podselect.1* symlink
* Unable to establish //usr/share/man/man1/perldoc.1* symlink
* Unable to establish //usr/share/man/man1/prove.1* symlink
* Unable to establish //usr/share/man/man1/pod2man.1* symlink
* Unable to establish //usr/share/man/man1/pod2text.1* symlink
* Unable to establish //usr/share/man/man1/perlpodstyle.1* symlink
* Messages for package dev-lang/python-3.2.5-r3:
* configure has detected that the sem_open function is broken.
* Please ensure that /dev/shm is mounted as a tmpfs with mode 1777.
* ERROR: dev-lang/python-3.2.5-r3::gentoo failed (configure phase):
* Broken sem_open function (bug 496328)
*
* Call stack:
* ebuild.sh, line 93: Called src_configure
* environment, line 4078: Called die
* The specific snippet of code:
* die "Broken sem_open function (bug 496328)";
*
* If you need support, post the output of `emerge --info '=dev-lang/python-3.2.5-r3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-3.2.5-r3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-3.2.5-r3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-3.2.5-r3/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-3.2.5-r3/work/ia64-unknown-linux-gnu'
* S: '/var/tmp/portage/dev-lang/python-3.2.5-r3/work/Python-3.2.5'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1235, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 226, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1295, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1240, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20140107/.catalyst_lock'
Full build log at /tmp/catalyst-auto.16254/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2013-12-31 18:21 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2013-12-31 18:21 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
checking for resizeterm... yes
checking for /dev/ptmx... yes
checking for /dev/ptc... no
checking for %lld and %llu printf() format support... yes
checking for %zd printf() format support... yes
checking for socklen_t... yes
checking for broken mbstowcs... no
checking whether ia64-unknown-linux-gnu-gcc -pthread supports computed gotos... yes
checking for --with-computed-gotos... yes
checking for pipe2... yes
checking for build directories... done
configure: creating ./config.status
config.status: creating Makefile.pre
config.status: creating Modules/Setup.config
config.status: creating Misc/python.pc
config.status: creating Modules/ld_so_aix
config.status: creating pyconfig.h
creating Modules/Setup
creating Modules/Setup.local
creating Makefile
* configure has detected that the sem_open function is broken.
* Please ensure that /dev/shm is mounted as a tmpfs with mode 1777.
* ERROR: dev-lang/python-3.2.5-r3::gentoo failed (configure phase):
* Broken sem_open function (bug 496328)
*
* Call stack:
* ebuild.sh, line 93: Called src_configure
* environment, line 4074: Called die
* The specific snippet of code:
* die "Broken sem_open function (bug 496328)";
*
* If you need support, post the output of `emerge --info '=dev-lang/python-3.2.5-r3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-3.2.5-r3::gentoo'`.
/var/tmp/portage/._portage_reinstall_.179u7w/bin/isolated-functions.sh: line 188: wait: `Broken sem_open function (bug 496328)': not a pid or valid job spec
* The complete build log is located at '/var/tmp/portage/dev-lang/python-3.2.5-r3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-3.2.5-r3/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-3.2.5-r3/work/ia64-unknown-linux-gnu'
* S: '/var/tmp/portage/dev-lang/python-3.2.5-r3/work/Python-3.2.5'
* Messages for package sys-libs/glibc-2.16.0:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-libs/timezone-data-2013d:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package app-portage/portage-utils-0.30:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package sys-apps/util-linux-2.22.2:
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-devel/gcc-4.7.3-r1:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* http://www.gentoo.org/doc/en/gcc-upgrading.xml
* Messages for package sys-devel/gcc-4.6.3:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* http://www.gentoo.org/doc/en/gcc-upgrading.xml
* Messages for package sys-fs/e2fsprogs-1.42.7:
* No /etc/mtab file, creating one temporarily
* Messages for package sys-apps/coreutils-8.20:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-libs/gdbm-1.8.3-r4:
* 32bit systems might have to rebuild all gdbm databases due to
* LFS changes in the gdbm format. You can either delete the db
* and regenerate it from scratch, or use the converter:
* http://bugs.gentoo.org/attachment.cgi?id=215326
*
* See this comment for information on how to use it:
* http://bugs.gentoo.org/299390#c15
*
* You should be able to locate most gdbm db's on your system with:
* find /etc /var -type f -exec file {} + | grep 'GNU dbm 1.x or ndbm database'
*
* You could also try using this helper script:
* http://bugs.gentoo.org/attachment.cgi?id=222581
* Messages for package dev-lang/perl-5.12.4-r1:
* Removing dead symlink /usr/share/man/man1/ptar.1.bz2
* Removing dead symlink /usr/share/man/man1/ptardiff.1.bz2
* Removing dead symlink /usr/share/man/man1/shasum.1.bz2
* Removing dead symlink /usr/share/man/man1/cpan.1.bz2
* Removing dead symlink /usr/share/man/man1/cpanp.1.bz2
* Removing dead symlink /usr/share/man/man1/cpan2dist.1.bz2
* Removing dead symlink /usr/share/man/man1/enc2xs.1.bz2
* Removing dead symlink /usr/share/man/man1/piconv.1.bz2
* Removing dead symlink /usr/share/man/man1/instmodsh.1.bz2
* Removing dead symlink /usr/share/man/man1/xsubpp.1.bz2
* Removing dead symlink /usr/share/man/man1/config_data.1.bz2
* Removing dead symlink /usr/share/man/man1/corelist.1.bz2
* Removing dead symlink /usr/share/man/man1/pod2usage.1.bz2
* Removing dead symlink /usr/share/man/man1/podchecker.1.bz2
* Removing dead symlink /usr/share/man/man1/podselect.1.bz2
* Removing dead symlink /usr/share/man/man1/prove.1.bz2
* Removing dead symlink /usr/share/man/man1/pod2man.1.bz2
* Removing dead symlink /usr/share/man/man1/pod2text.1.bz2
* Messages for package dev-lang/perl-5.16.3:
* UPDATE THE PERL MODULES:
* After updating dev-lang/perl you must reinstall
* the installed perl modules.
* Use: perl-cleaner --all
* Unable to establish //usr/share/man/man1/ptar.1* symlink
* Unable to establish //usr/share/man/man1/ptardiff.1* symlink
* Unable to establish //usr/share/man/man1/ptargrep.1* symlink
* Unable to establish //usr/share/man/man1/shasum.1* symlink
* Unable to establish //usr/share/man/man1/cpan.1* symlink
* Unable to establish //usr/share/man/man1/cpanp.1* symlink
* Unable to establish //usr/share/man/man1/cpan2dist.1* symlink
* Unable to establish //usr/share/man/man1/enc2xs.1* symlink
* Unable to establish //usr/share/man/man1/piconv.1* symlink
* Unable to establish //usr/share/man/man1/instmodsh.1* symlink
* Unable to establish //usr/share/man/man1/xsubpp.1* symlink
* Unable to establish //usr/share/man/man1/zipdetails.1* symlink
* Unable to establish //usr/share/man/man1/json_pp.1* symlink
* Unable to establish //usr/share/man/man1/config_data.1* symlink
* Unable to establish //usr/share/man/man1/corelist.1* symlink
* Unable to establish //usr/share/man/man1/pod2usage.1* symlink
* Unable to establish //usr/share/man/man1/podchecker.1* symlink
* Unable to establish //usr/share/man/man1/podselect.1* symlink
* Unable to establish //usr/share/man/man1/perldoc.1* symlink
* Unable to establish //usr/share/man/man1/prove.1* symlink
* Unable to establish //usr/share/man/man1/pod2man.1* symlink
* Unable to establish //usr/share/man/man1/pod2text.1* symlink
* Unable to establish //usr/share/man/man1/perlpodstyle.1* symlink
* Messages for package dev-lang/python-3.2.5-r3:
* configure has detected that the sem_open function is broken.
* Please ensure that /dev/shm is mounted as a tmpfs with mode 1777.
* ERROR: dev-lang/python-3.2.5-r3::gentoo failed (configure phase):
* Broken sem_open function (bug 496328)
*
* Call stack:
* ebuild.sh, line 93: Called src_configure
* environment, line 4074: Called die
* The specific snippet of code:
* die "Broken sem_open function (bug 496328)";
*
* If you need support, post the output of `emerge --info '=dev-lang/python-3.2.5-r3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-3.2.5-r3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-3.2.5-r3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-3.2.5-r3/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-3.2.5-r3/work/ia64-unknown-linux-gnu'
* S: '/var/tmp/portage/dev-lang/python-3.2.5-r3/work/Python-3.2.5'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1235, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 226, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1295, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1240, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20131231/.catalyst_lock'
Full build log at /tmp/catalyst-auto.27600/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2013-10-08 3:43 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2013-10-08 3:43 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: ./sbin/ipmaddr: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/nologin: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/debugfs: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/resize2fs: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/chcpu: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/ctrlaltdel: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/logsave: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/mkswap: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/rc-update: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/rarp: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/rc: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/rmmod: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/fstrim: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/cfdisk: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/swaplabel: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/iptunnel: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/e2undo: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/blkid: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/pam_timestamp_check: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/e2fsck: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/fsck.cramfs: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/unix_chkpwd: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/mkfs.ext4: Cannot hard link to `./sbin/mkfs.ext4dev': No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/mkfs.bfs: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/fstab-decode: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/swapoff: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/losetup: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/installkernel: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/halt: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/plipconfig: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/agetty: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/e2label: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/arping: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/modprobe: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/blockdev: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/bootlogd: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/fsck.ext4dev: Cannot hard link to `./sbin/e2fsck': No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/sysctl: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/swapon: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/fsck.ext4: Cannot hard link to `./sbin/e2fsck': No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/mkfs: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/raw: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/ldconfig: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/rc-service: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/fsck.ext2: Cannot hard link to `./sbin/e2fsck': No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/mkfs.minix: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/nameif: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/modinfo: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/tune2fs: Cannot hard link to `./sbin/e2label': No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/telinit: Cannot create symlink to `init': No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/init: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/reboot: Cannot create symlink to `halt': No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/start-stop-daemon: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/mkhomedir_helper: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/fsfreeze: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/lsmod: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/hwclock: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/mke2fs: Cannot hard link to `./sbin/mkfs.ext4dev': No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/pivot_root: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/pam_tally2: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/poweroff: Cannot create symlink to `halt': No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/slattach: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/mkfs.ext2: Cannot hard link to `./sbin/mkfs.ext4dev': No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/fsck.ext3: Cannot hard link to `./sbin/e2fsck': No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/depmod: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/runlevel: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/pam_tally: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/fsck: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/e2image: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/mii-tool: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/fsck.minix: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/insmod: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/switch_root: Cannot open: No such file or directory
tar: ./sbin: Cannot mkdir: No space left on device
tar: ./sbin/mkfs.ext3: Cannot hard link to `./sbin/mkfs.ext4dev': No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc: Cannot mkdir: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc/started: Cannot mkdir: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc/stopping: Cannot mkdir: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc/daemons: Cannot mkdir: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc/exclusive: Cannot mkdir: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc/tmp: Cannot mkdir: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc/starting: Cannot mkdir: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc/failed: Cannot mkdir: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc/deptree: Cannot open: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc/wasinactive: Cannot mkdir: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc/depconfig: Cannot open: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc/scheduled: Cannot mkdir: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc/inactive: Cannot mkdir: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc/options: Cannot mkdir: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/openrc/hotplugged: Cannot mkdir: No such file or directory
tar: ./run: Cannot mkdir: No space left on device
tar: ./run/.keep: Cannot open: No such file or directory
tar: ./sys: Cannot mkdir: No space left on device
tar: ./sys: Cannot mkdir: No space left on device
tar: ./sys/.keep: Cannot open: No such file or directory
tar: Exiting with failure status due to previous errors
!!! catalyst: Tarball extraction of /var/tmp/catalyst/builds/default/stage3-ia64-2008.0.tar.bz2 to /var/tmp/catalyst/tmp/default/stage1-ia64-20131008/ failed.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 226, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1295, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 752, in unpack
cmd(unpack_cmd,error_msg,env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20131008/.catalyst_lock'
Full build log at /tmp/catalyst-auto.8644/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2013-10-01 7:27 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2013-10-01 7:27 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: gcc-4.6.3/gcc/objcp: Cannot mkdir: No space left on device
tar: gcc-4.6.3/gcc/objcp/Make-lang.in: Cannot open: No such file or directory
tar: gcc-4.6.3/gcc/cppdefault.h: Cannot open: No space left on device
tar: gcc-4.6.3/gcc/gimple-iterator.c: Cannot open: No space left on device
tar: gcc-4.6.3/gcc/tree-into-ssa.c: Cannot open: No space left on device
tar: gcc-4.6.3/gcc/tree-chrec.h: Cannot open: No space left on device
tar: gcc-4.6.3/ylwrap: Cannot open: No space left on device
tar: gcc-4.6.3/MD5SUMS: Cannot open: No space left on device
tar: Exiting with failure status due to previous errors
/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/isolated-functions.sh: line 246: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* ERROR: sys-devel/gcc-4.6.3::gentoo failed (unpack phase):
/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/isolated-functions.sh: line 246: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* failure unpacking gcc-4.6.3.tar.bz2
/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/isolated-functions.sh: line 246: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
*
/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/isolated-functions.sh: line 246: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* Call stack:
/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/isolated-functions.sh: line 246: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* ebuild.sh, line 93: Called src_unpack
/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/isolated-functions.sh: line 246: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* environment, line 4291: Called toolchain_src_unpack
/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/isolated-functions.sh: line 246: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* environment, line 5081: Called gcc_quick_unpack
/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/isolated-functions.sh: line 246: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* environment, line 2592: Called unpack 'gcc-4.6.3.tar.bz2'
/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/isolated-functions.sh: line 246: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* phase-helpers.sh, line 345: Called __unpack_tar 'bzip2 -d'
/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/isolated-functions.sh: line 246: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* phase-helpers.sh, line 315: Called __assert_sigpipe_ok 'failure unpacking gcc-4.6.3.tar.bz2'
/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/isolated-functions.sh: line 246: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* isolated-functions.sh, line 39: Called die
/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/isolated-functions.sh: line 246: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* The specific snippet of code:
/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/isolated-functions.sh: line 246: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* [[ $x -ne 0 && $x -ne ${PORTAGE_SIGPIPE_STATUS:-141} ]] && die "$@"
/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/isolated-functions.sh: line 246: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
*
/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/isolated-functions.sh: line 246: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.6.3::gentoo'`,
/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/isolated-functions.sh: line 246: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.6.3::gentoo'`.
/var/tmp/portage/sys-devel/gcc-4.6.3/temp/environment: line 4882: pushd: /var/tmp/portage/sys-devel/gcc-4.6.3/work/build: No such file or directory
tar: Cowardly refusing to create an empty archive
Try `tar --help' or `tar --usage' for more information.
/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/isolated-functions.sh: line 246: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
*
/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/isolated-functions.sh: line 246: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* Please include /var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-build-logs.tar.bz2 in your bug report
/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/isolated-functions.sh: line 246: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
*
/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/isolated-functions.sh: line 190: /var/tmp/portage/sys-devel/gcc-4.6.3/.die_hooks: No space left on device
/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/isolated-functions.sh: line 246: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.6.3/temp/build.log'.
/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/isolated-functions.sh: line 246: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.6.3/temp/environment'.
/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/isolated-functions.sh: line 246: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.6.3/work'
/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/isolated-functions.sh: line 246: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* S: '/var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3'
Traceback (most recent call last):
File "/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/ebuild-ipc.py", line 228, in <module>
sys.exit(ebuild_ipc_main(sys.argv[1:]))
File "/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/ebuild-ipc.py", line 225, in ebuild_ipc_main
return ebuild_ipc.communicate(args)
File "/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/ebuild-ipc.py", line 82, in communicate
lock_obj = portage.locks.lockfile(self.ipc_lock_file, unlinkfile=True)
File "/var/tmp/portage/._portage_reinstall_.y6b3sa/pym/portage/locks.py", line 105, in lockfile
myfd = os.open(lockfilename, os.O_CREAT|os.O_RDWR, 0o660)
File "/var/tmp/portage/._portage_reinstall_.y6b3sa/pym/portage/__init__.py", line 259, in __call__
rval = self._func(*wrapped_args, **wrapped_kwargs)
OSError: [Errno 28] No space left on device: '/var/tmp/portage/sys-devel/gcc-4.6.3/.ipc_lock'
* The ebuild phase 'unpack' has exited unexpectedly. This type of behavior
* is known to be triggered by things such as failed variable assignments
* (bug #190128) or bad substitution errors (bug #200313). Normally, before
* exiting, bash should have displayed an error message above. If bash did
* not produce an error message above, it's possible that the ebuild has
* called `exit` when it should have called `die` instead. This behavior
* may also be triggered by a corrupt bash binary or a hardware problem
* such as memory or cpu malfunction. If the problem is not reproducible or
* it appears to occur randomly, then it is likely to be triggered by a
* hardware problem. If you suspect a hardware problem then you should try
* some basic hardware diagnostics such as memtest. Please do not report
* this as a bug unless it is consistently reproducible and you are sure
* that your bash binary and hardware are functioning properly.
/var/tmp/portage/sys-devel/gcc-4.6.3/temp/environment: line 4882: pushd: /var/tmp/portage/sys-devel/gcc-4.6.3/work/build: No such file or directory
tar: Cowardly refusing to create an empty archive
Try `tar --help' or `tar --usage' for more information.
/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/isolated-functions.sh: line 246: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/other: No space left on device
*
/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/isolated-functions.sh: line 246: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/other: No space left on device
* Please include /var/tmp/portage/._portage_reinstall_.y6b3sa/pym/gcc-build-logs.tar.bz2 in your bug report
/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/isolated-functions.sh: line 246: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/other: No space left on device
*
/var/tmp/portage/sys-devel/gcc-4.6.3/temp/environment: line 4887: popd: directory stack empty
/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/misc-functions.sh: line 1246: /var/tmp/portage/sys-devel/gcc-4.6.3/.die_hooks: No space left on device
Traceback (most recent call last):
File "/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/ebuild-ipc.py", line 228, in <module>
sys.exit(ebuild_ipc_main(sys.argv[1:]))
File "/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/ebuild-ipc.py", line 225, in ebuild_ipc_main
return ebuild_ipc.communicate(args)
File "/var/tmp/portage/._portage_reinstall_.y6b3sa/bin/ebuild-ipc.py", line 82, in communicate
lock_obj = portage.locks.lockfile(self.ipc_lock_file, unlinkfile=True)
File "/var/tmp/portage/._portage_reinstall_.y6b3sa/pym/portage/locks.py", line 105, in lockfile
myfd = os.open(lockfilename, os.O_CREAT|os.O_RDWR, 0o660)
File "/var/tmp/portage/._portage_reinstall_.y6b3sa/pym/portage/__init__.py", line 259, in __call__
rval = self._func(*wrapped_args, **wrapped_kwargs)
OSError: [Errno 28] No space left on device: '/var/tmp/portage/sys-devel/gcc-4.6.3/.ipc_lock'
* The ebuild phase 'die_hooks' has exited unexpectedly. This type of
* behavior is known to be triggered by things such as failed variable
* assignments (bug #190128) or bad substitution errors (bug #200313).
* Normally, before exiting, bash should have displayed an error message
* above. If bash did not produce an error message above, it's possible
* that the ebuild has called `exit` when it should have called `die`
* instead. This behavior may also be triggered by a corrupt bash binary or
* a hardware problem such as memory or cpu malfunction. If the problem is
* not reproducible or it appears to occur randomly, then it is likely to
* be triggered by a hardware problem. If you suspect a hardware problem
* then you should try some basic hardware diagnostics such as memtest.
* Please do not report this as a bug unless it is consistently
* reproducible and you are sure that your bash binary and hardware are
* functioning properly.
* Messages for package sys-libs/timezone-data-2013d:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package app-portage/portage-utils-0.30:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package sys-apps/util-linux-2.22.2:
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-fs/e2fsprogs-1.42.7:
* No /etc/mtab file, creating one temporarily
* Messages for package sys-apps/less-457:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package sys-apps/coreutils-8.20:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-libs/glibc-2.15-r3:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-devel/gcc-4.6.3:
* The ebuild phase 'unpack' has exited unexpectedly. This type of behavior
* is known to be triggered by things such as failed variable assignments
* (bug #190128) or bad substitution errors (bug #200313). Normally, before
* exiting, bash should have displayed an error message above. If bash did
* not produce an error message above, it's possible that the ebuild has
* called `exit` when it should have called `die` instead. This behavior
* may also be triggered by a corrupt bash binary or a hardware problem
* such as memory or cpu malfunction. If the problem is not reproducible or
* it appears to occur randomly, then it is likely to be triggered by a
* hardware problem. If you suspect a hardware problem then you should try
* some basic hardware diagnostics such as memtest. Please do not report
* this as a bug unless it is consistently reproducible and you are sure
* that your bash binary and hardware are functioning properly.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1235, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 226, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1295, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1240, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20131001/.catalyst_lock'
Full build log at /tmp/catalyst-auto.25424/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2013-08-20 9:07 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2013-08-20 9:07 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.12.2
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for ia64
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-ia64-2008.0.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20130820/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20130820/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-ia64-20130820/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-ia64-20130820/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-ia64-20130820/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20130820/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20130820/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ia64-20130820/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20130820/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ia64-20130820/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-ia64-2008.0.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-ia64-20130820/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20130820/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20130820/.catalyst_lock'
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-ia64-20130820///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to ./tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-ia64-20130820/./tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-ia64-20130820/./tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-ia64-20130820/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps --update sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.1.12.2
>>> Installing (1 of 1) sys-apps/portage-2.1.12.2
* Messages for package sys-apps/portage-2.1.12.2:
* skipping python_targets_python2_7, interpreter not found
Updating seed stage...
emerge --quiet --usepkg --buildpkg --newuse yes
emerge: there are no ebuilds to satisfy "yes".
emerge: searching for similar names...
emerge: Maybe you meant any of these: x11-apps/xeyes, www-apps/eyeos, net-im/ysm?
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1230, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 214, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1290, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1235, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20130820/.catalyst_lock'
Full build log at /tmp/catalyst-auto.2227/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2013-06-25 3:46 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2013-06-25 3:46 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxde-common/lxde-common-0.5.5-r3.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxde-common/Manifest: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxde-common/lxde-common-0.5.5-r2.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxinput: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxinput/metadata.xml: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxinput/lxinput-0.3.2.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxinput/ChangeLog: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxinput/Manifest: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxtask: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxtask/metadata.xml: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxtask/files: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxtask/files/lxtask-0.1.4-remove-broken-linguas.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxtask/ChangeLog: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxtask/Manifest: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxtask/lxtask-0.1.4.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxpolkit: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxpolkit/lxpolkit-0.1.0-r1.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxpolkit/metadata.xml: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxpolkit/ChangeLog: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxpolkit/Manifest: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxrandr: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxrandr/lxrandr-0.1.2.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxrandr/metadata.xml: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxrandr/ChangeLog: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxrandr/Manifest: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/metadata.xml: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxappearance: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxappearance/lxappearance-0.5.2.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxappearance/metadata.xml: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxappearance/files: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxappearance/files/lxappearance-0.2.1-intltool.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxappearance/files/lxappearance-0.4.0-linguas.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxappearance/ChangeLog: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxappearance/Manifest: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxsession-edit: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxsession-edit/metadata.xml: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxsession-edit/ChangeLog: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxsession-edit/Manifest: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxsession-edit/lxsession-edit-0.2.0.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/lxdm-0.4.1-r7.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/metadata.xml: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/lxdm-0.4.1-r5.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/files: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/files/lxdm-0.4.1-fix-pam-100-cpu.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/files/lxdm-0.4.1-git-fix-null-pointer-deref.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/files/lxdm-0.4.1-pam_console-disable.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/files/lxdm-0.4.1-missing-pam-defines.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/files/lxdm-0.3.0-properly-load-session-settings-using-dmrc-entry-as-pointer-for-xsessions-dir-file.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/files/lxdm-0.4.1-event-check.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/files/lxdm-0.4.1-pam-use-system-local-login.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/files/lxdm-0.4.1-configure-add-pam.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/files/lxdm-0.3.0-pam_console-disable.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/files/lxdm-0.4.1-selinux-support.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/files/lxdm-0.3.0-consolekit-disable.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/ChangeLog: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxdm/Manifest: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxlauncher: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxlauncher/lxlauncher-0.2.2.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxlauncher/metadata.xml: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxlauncher/files: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxlauncher/files/lxlauncher-0.2.1-intltool.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxlauncher/files/lxlauncher-0.2.1-fix-segfault.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxlauncher/ChangeLog: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxlauncher/lxlauncher-0.2.1-r1.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxlauncher/Manifest: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxlauncher/lxlauncher-0.2.1.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxsession: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxsession/metadata.xml: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxsession/ChangeLog: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxsession/Manifest: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxsession/lxsession-0.4.6.1.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxmenu-data: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxmenu-data/lxmenu-data-0.1.2.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxmenu-data/metadata.xml: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxmenu-data/ChangeLog: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxmenu-data/Manifest: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/menu-cache: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/menu-cache/metadata.xml: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/menu-cache/menu-cache-0.4.1.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/menu-cache/ChangeLog: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/menu-cache/Manifest: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/menu-cache/menu-cache-0.3.3.ebuild: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxpanel: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxpanel/metadata.xml: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxpanel/files: Cannot mkdir: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxpanel/files/lxpanel-0.5.9-libwnck-check.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxpanel/files/lxpanel-0.5.9-sandbox.patch: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxpanel/ChangeLog: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxpanel/Manifest: Cannot open: No such file or directory
tar: portage/lxde-base: Cannot mkdir: No space left on device
tar: portage/lxde-base/lxpanel/lxpanel-0.5.12.ebuild: Cannot open: No such file or directory
tar: Exiting with failure status due to previous errors
!!! catalyst: Error unpacking snapshot
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 214, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1290, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 820, in unpack_snapshot
cmd(unpack_cmd,unpack_errmsg,env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20130625/.catalyst_lock'
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20130625/.catalyst_lock'
Full build log at /tmp/catalyst-auto.31492/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2013-04-30 6:47 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2013-04-30 6:47 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: gcc-4.6.3/gcc/host-default.c: Cannot open: No space left on device
tar: gcc-4.6.3/gcc/objcp: Cannot mkdir: No space left on device
tar: gcc-4.6.3/gcc/objcp: Cannot mkdir: No space left on device
tar: gcc-4.6.3/gcc/objcp/objcp-lang.c: Cannot open: No such file or directory
tar: gcc-4.6.3/gcc/objcp: Cannot mkdir: No space left on device
tar: gcc-4.6.3/gcc/objcp/ChangeLog: Cannot open: No such file or directory
tar: gcc-4.6.3/gcc/objcp: Cannot mkdir: No space left on device
tar: gcc-4.6.3/gcc/objcp/config-lang.in: Cannot open: No such file or directory
tar: gcc-4.6.3/gcc/objcp: Cannot mkdir: No space left on device
tar: gcc-4.6.3/gcc/objcp/lang-specs.h: Cannot open: No such file or directory
tar: gcc-4.6.3/gcc/objcp: Cannot mkdir: No space left on device
tar: gcc-4.6.3/gcc/objcp/objcp-decl.c: Cannot open: No such file or directory
tar: gcc-4.6.3/gcc/objcp: Cannot mkdir: No space left on device
tar: gcc-4.6.3/gcc/objcp/objcp-decl.h: Cannot open: No such file or directory
tar: gcc-4.6.3/gcc/objcp: Cannot mkdir: No space left on device
tar: gcc-4.6.3/gcc/objcp/Make-lang.in: Cannot open: No such file or directory
tar: gcc-4.6.3/gcc/cppdefault.h: Cannot open: No space left on device
tar: gcc-4.6.3/gcc/gimple-iterator.c: Cannot open: No space left on device
tar: gcc-4.6.3/gcc/tree-into-ssa.c: Cannot open: No space left on device
tar: gcc-4.6.3/gcc/tree-chrec.h: Cannot open: No space left on device
tar: gcc-4.6.3/ylwrap: Cannot open: No space left on device
tar: gcc-4.6.3/MD5SUMS: Cannot open: No space left on device
tar: Exiting with failure status due to previous errors
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* ERROR: sys-devel/gcc-4.6.3 failed (unpack phase):
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* failure unpacking gcc-4.6.3.tar.bz2
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
*
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* Call stack:
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* ebuild.sh, line 93: Called src_unpack
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* environment, line 4195: Called toolchain_src_unpack
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* environment, line 4949: Called gcc_quick_unpack
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* environment, line 2490: Called unpack 'gcc-4.6.3.tar.bz2'
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* phase-helpers.sh, line 345: Called __unpack_tar 'bzip2 -d'
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* phase-helpers.sh, line 315: Called __assert_sigpipe_ok 'failure unpacking gcc-4.6.3.tar.bz2'
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* isolated-functions.sh, line 39: Called die
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* The specific snippet of code:
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* [[ $x -ne 0 && $x -ne ${PORTAGE_SIGPIPE_STATUS:-141} ]] && die "$@"
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
*
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.6.3'`,
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.6.3'`.
/var/tmp/portage/sys-devel/gcc-4.6.3/temp/environment: line 4757: pushd: /var/tmp/portage/sys-devel/gcc-4.6.3/work/build: No such file or directory
tar: Cowardly refusing to create an empty archive
Try `tar --help' or `tar --usage' for more information.
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
*
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* Please include /var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-build-logs.tar.bz2 in your bug report
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
*
/usr/lib/portage/bin/isolated-functions.sh: line 217: /var/tmp/portage/sys-devel/gcc-4.6.3/.die_hooks: No space left on device
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.6.3/temp/build.log'.
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.6.3/temp/environment'.
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.6.3/work'
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* S: '/var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3'
Traceback (most recent call last):
File "/usr/lib/portage/bin/ebuild-ipc.py", line 228, in <module>
sys.exit(ebuild_ipc_main(sys.argv[1:]))
File "/usr/lib/portage/bin/ebuild-ipc.py", line 225, in ebuild_ipc_main
return ebuild_ipc.communicate(args)
File "/usr/lib/portage/bin/ebuild-ipc.py", line 82, in communicate
lock_obj = portage.locks.lockfile(self.ipc_lock_file, unlinkfile=True)
File "/usr/lib/portage/pym/portage/locks.py", line 103, in lockfile
myfd = os.open(lockfilename, os.O_CREAT|os.O_RDWR, 0o660)
File "/usr/lib/portage/pym/portage/__init__.py", line 246, in __call__
rval = self._func(*wrapped_args, **wrapped_kwargs)
OSError: [Errno 28] No space left on device: '/var/tmp/portage/sys-devel/gcc-4.6.3/.ipc_lock'
* The ebuild phase 'unpack' has exited unexpectedly. This type of behavior
* is known to be triggered by things such as failed variable assignments
* (bug #190128) or bad substitution errors (bug #200313). Normally, before
* exiting, bash should have displayed an error message above. If bash did
* not produce an error message above, it's possible that the ebuild has
* called `exit` when it should have called `die` instead. This behavior
* may also be triggered by a corrupt bash binary or a hardware problem
* such as memory or cpu malfunction. If the problem is not reproducible or
* it appears to occur randomly, then it is likely to be triggered by a
* hardware problem. If you suspect a hardware problem then you should try
* some basic hardware diagnostics such as memtest. Please do not report
* this as a bug unless it is consistently reproducible and you are sure
* that your bash binary and hardware are functioning properly.
/var/tmp/portage/sys-devel/gcc-4.6.3/temp/environment: line 4757: pushd: /var/tmp/portage/sys-devel/gcc-4.6.3/work/build: No such file or directory
tar: Cowardly refusing to create an empty archive
Try `tar --help' or `tar --usage' for more information.
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/other: No space left on device
*
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/other: No space left on device
* Please include /var/tmp/portage/sys-devel/gcc-4.6.3/gcc-build-logs.tar.bz2 in your bug report
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/other: No space left on device
*
/var/tmp/portage/sys-devel/gcc-4.6.3/temp/environment: line 4762: popd: directory stack empty
/usr/lib/portage/bin/misc-functions.sh: line 1245: /var/tmp/portage/sys-devel/gcc-4.6.3/.die_hooks: No space left on device
Traceback (most recent call last):
File "/usr/lib/portage/bin/ebuild-ipc.py", line 228, in <module>
sys.exit(ebuild_ipc_main(sys.argv[1:]))
File "/usr/lib/portage/bin/ebuild-ipc.py", line 225, in ebuild_ipc_main
return ebuild_ipc.communicate(args)
File "/usr/lib/portage/bin/ebuild-ipc.py", line 82, in communicate
lock_obj = portage.locks.lockfile(self.ipc_lock_file, unlinkfile=True)
File "/usr/lib/portage/pym/portage/locks.py", line 103, in lockfile
myfd = os.open(lockfilename, os.O_CREAT|os.O_RDWR, 0o660)
File "/usr/lib/portage/pym/portage/__init__.py", line 246, in __call__
rval = self._func(*wrapped_args, **wrapped_kwargs)
OSError: [Errno 28] No space left on device: '/var/tmp/portage/sys-devel/gcc-4.6.3/.ipc_lock'
* The ebuild phase 'die_hooks' has exited unexpectedly. This type of
* behavior is known to be triggered by things such as failed variable
* assignments (bug #190128) or bad substitution errors (bug #200313).
* Normally, before exiting, bash should have displayed an error message
* above. If bash did not produce an error message above, it's possible
* that the ebuild has called `exit` when it should have called `die`
* instead. This behavior may also be triggered by a corrupt bash binary or
* a hardware problem such as memory or cpu malfunction. If the problem is
* not reproducible or it appears to occur randomly, then it is likely to
* be triggered by a hardware problem. If you suspect a hardware problem
* then you should try some basic hardware diagnostics such as memtest.
* Please do not report this as a bug unless it is consistently
* reproducible and you are sure that your bash binary and hardware are
* functioning properly.
* Messages for package sys-libs/timezone-data-2013b merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package sys-apps/coreutils-8.20 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.22.2 merged to /tmp/stage1root/:
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-libs/glibc-2.15-r3 merged to /tmp/stage1root/:
* Defaulting /etc/host.conf:multi to on
* Messages for package sys-devel/gcc-4.6.3 merged to /tmp/stage1root/:
*
* LTO support is still experimental and unstable.
* Any bugs resulting from the use of LTO will not be fixed.
*
* The ebuild phase 'unpack' has exited unexpectedly. This type of behavior
* is known to be triggered by things such as failed variable assignments
* (bug #190128) or bad substitution errors (bug #200313). Normally, before
* exiting, bash should have displayed an error message above. If bash did
* not produce an error message above, it's possible that the ebuild has
* called `exit` when it should have called `die` instead. This behavior
* may also be triggered by a corrupt bash binary or a hardware problem
* such as memory or cpu malfunction. If the problem is not reproducible or
* it appears to occur randomly, then it is likely to be triggered by a
* hardware problem. If you suspect a hardware problem then you should try
* some basic hardware diagnostics such as memtest. Please do not report
* this as a bug unless it is consistently reproducible and you are sure
* that your bash binary and hardware are functioning properly.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1230, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 214, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1290, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1235, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20130430/.catalyst_lock'
Full build log at /tmp/catalyst-auto.29009/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2013-04-02 7:16 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2013-04-02 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Applying io_quotes_use to linux/input.h
Applying io_quotes_use to linux/auto_fs.h
Applying io_quotes_use to linux/auto_fs4.h
Applying io_quotes_use to linux/omapfb.h
Applying io_quotes_use to linux/spi/spidev.h
Applying io_quotes_use to linux/agpgart.h
Applying io_quotes_use to linux/kvm.h
Applying io_quotes_use to linux/cm4000_cs.h
Applying io_quotes_use to linux/hsi/hsi_char.h
Applying io_quotes_use to linux/synclink.h
Applying io_quotes_use to linux/vhost.h
Applying io_quotes_use to linux/blkpg.h
Applying io_quotes_def to linux/pci_regs.h
Applying io_quotes_use to linux/nbd.h
Applying io_quotes_use to linux/atmbr2684.h
Applying pthread_incomplete_struct_argument to pthread.h
Applying glibc_stdint to stdint.h
Applying io_quotes_use to video/sisfb.h
Applying linux_ia64_ucontext to sys/ucontext.h
Fixed: sys/ucontext.h
Applying io_quotes_use to sys/raw.h
Applying io_quotes_use to sys/mount.h
Applying ctrl_quotes_def to readline/chardefs.h
Cleaning up unneeded directories:
fixincludes is done
echo timestamp > stmp-fixinc
if [ -d include ] ; then true; else mkdir include; chmod a+rx include; fi
if [ -d include-fixed ] ; then true; else mkdir include-fixed; chmod a+rx include-fixed; fi
for file in .. /var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/ginclude/float.h /var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/ginclude/iso646.h /var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/ginclude/stdarg.h /var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/ginclude/stdbool.h /var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/ginclude/stddef.h /var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/ginclude/varargs.h /var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/ginclude/stdfix.h /var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/config/ia64/ia64intrin.h; do \
if [ X$file != X.. ]; then \
realfile=`echo $file | sed -e 's|.*/\([^/]*\)$|\1|'`; \
echo timestamp > include/$realfile; \
rm -f include/$realfile; \
cp $file include; \
chmod a+r include/$realfile; \
fi; \
done
for file in .. ; do \
if [ X$file != X.. ]; then \
mv include/$file include/x_$file; \
echo "#include_next <$file>" >include/$file; \
cat include/x_$file >>include/$file; \
rm -f include/x_$file; \
chmod a+r include/$file; \
fi; \
done
for file in .. ; do \
if [ X$file != X.. ]; then \
echo "#include_next <$file>" >>include/$file; \
chmod a+r include/$file; \
fi; \
done
rm -f include/unwind.h
cp /var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/unwind-generic.h include/unwind.h
chmod a+r include/unwind.h
rm -f include/stdint.h
if [ wrap = wrap ]; then \
rm -f include/stdint-gcc.h; \
cp /var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/ginclude/stdint-gcc.h include/stdint-gcc.h; \
chmod a+r include/stdint-gcc.h; \
cp /var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/ginclude/stdint-wrap.h include/stdint.h; \
chmod a+r include/stdint.h; \
elif [ wrap = provide ]; then \
cp /var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/ginclude/stdint-gcc.h include/stdint.h; \
chmod a+r include/stdint.h; \
fi
set -e; for ml in `cat fixinc_list`; do \
sysroot_headers_suffix=`echo ${ml} | sed -e 's/;.*$//'`; \
multi_dir=`echo ${ml} | sed -e 's/^[^;]*;//'`; \
fix_dir=include-fixed${multi_dir}; \
if [ -f `echo /usr/include | sed -e :a -e 's,[^/]*/\.\.\/,,' -e ta`/limits.h ] ; then \
cat /var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/limitx.h /var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/glimits.h /var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/limity.h > tmp-xlimits.h; \
else \
cat /var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/glimits.h > tmp-xlimits.h; \
fi; \
/bin/sh /var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/../mkinstalldirs ${fix_dir}; \
chmod a+rx ${fix_dir} || true; \
rm -f ${fix_dir}/limits.h; \
mv tmp-xlimits.h ${fix_dir}/limits.h; \
chmod a+r ${fix_dir}/limits.h; \
done
rm -f include-fixed/README
cp /var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/../fixincludes/README-fixinc include-fixed/README
chmod a+r include-fixed/README
echo timestamp > stmp-int-hdrs
TARGET_CPU_DEFAULT="" \
HEADERS="auto-host.h ansidecl.h" DEFINES="USED_FOR_TARGET " \
/bin/sh /var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/mkconfig.sh tconfig.h
cp /var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/config/ia64/sfp-machine.h sfp-machine.h
ia64-unknown-linux-gnu-gcc -c -DUSE_LIBUNWIND_EXCEPTIONS -DIN_GCC -W -Wall -Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -Wold-style-definition -Wc++-compat -DHAVE_CONFIG_H -I. -Ilto -I/var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/lto -I/var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/../libdecnumber/dpd -I../libdecnumber /var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/lto/lto-lang.c -o lto/lto-lang.o
ia64-unknown-linux-gnu-gcc -c -DUSE_LIBUNWIND_EXCEPTIONS -DIN_GCC -W -Wall -Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -Wold-style-definition -Wc++-compat -DHAVE_CONFIG_H -I. -Ilto -I/var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/lto -I/var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/../libdecnumber/dpd -I../libdecnumber /var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/lto/lto.c -o lto/lto.o
ia64-unknown-linux-gnu-gcc -c -DUSE_LIBUNWIND_EXCEPTIONS -DIN_GCC -W -Wall -Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -Wold-style-definition -Wc++-compat -DHAVE_CONFIG_H -I. -Ilto -I/var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/lto -I/var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/../libdecnumber/dpd -I../libdecnumber /var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/lto/lto-object.c -o lto/lto-object.o
ia64-unknown-linux-gnu-gcc -DUSE_LIBUNWIND_EXCEPTIONS -DIN_GCC -W -Wall -Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -Wold-style-definition -Wc++-compat -DHAVE_CONFIG_H -Wl,-O1 -Wl,--as-needed -o lto1 \
lto/lto-lang.o lto/lto.o lto/lto-object.o attribs.o main.o libbackend.a ../libcpp/libcpp.a ../libdecnumber/libdecnumber.a -lmpc -lmpfr -lgmp -rdynamic -ldl -lz ../libcpp/libcpp.a ../libiberty/libiberty.a ../libdecnumber/libdecnumber.a
if [ xinfo = xinfo ]; then \
makeinfo --split-size=5000000 --split-size=5000000 --split-size=5000000 --no-split -I . -I /var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/doc \
-I /var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/doc/include -o doc/cpp.info /var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/doc/cpp.texi; \
fi
/var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3/gcc/doc/include/gcc-common.texi:12: @include `gcc-vers.texi': No such file or directory.
makeinfo: Removing output file `doc/cpp.info' due to errors; use --force to preserve.
make[3]: *** [doc/cpp.info] Error 1
make[3]: Leaving directory `/var/tmp/portage/sys-devel/gcc-4.6.3/work/build/gcc'
make[2]: *** [all-stage1-gcc] Error 2
make[2]: Leaving directory `/var/tmp/portage/sys-devel/gcc-4.6.3/work/build'
make[1]: *** [stage1-bubble] Error 2
make[1]: Leaving directory `/var/tmp/portage/sys-devel/gcc-4.6.3/work/build'
make: *** [bootstrap-lean] Error 2
emake failed
* ERROR: sys-devel/gcc-4.6.3 failed (compile phase):
* emake failed with bootstrap-lean
*
* Call stack:
* ebuild.sh, line 93: Called src_compile
* environment, line 4127: Called toolchain_src_compile
* environment, line 4787: Called gcc_do_make
* environment, line 2426: Called die
* The specific snippet of code:
* emake LDFLAGS="${LDFLAGS}" STAGE1_CFLAGS="${STAGE1_CFLAGS}" LIBPATH="${LIBPATH}" BOOT_CFLAGS="${BOOT_CFLAGS}" ${GCC_MAKE_TARGET} || die "emake failed with ${GCC_MAKE_TARGET}";
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.6.3'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.6.3'`.
*
* Please include /var/tmp/portage/sys-devel/gcc-4.6.3/work/build/gcc-build-logs.tar.bz2 in your bug report
*
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.6.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.6.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.6.3/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.6.3/work/build'
* Messages for package sys-libs/timezone-data-2012j merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package sys-apps/coreutils-8.20 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.22.2 merged to /tmp/stage1root/:
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-libs/glibc-2.15-r3 merged to /tmp/stage1root/:
* Defaulting /etc/host.conf:multi to on
* Messages for package sys-devel/gcc-4.6.3 merged to /tmp/stage1root/:
*
* LTO support is still experimental and unstable.
* Any bugs resulting from the use of LTO will not be fixed.
*
* ERROR: sys-devel/gcc-4.6.3 failed (compile phase):
* emake failed with bootstrap-lean
*
* Call stack:
* ebuild.sh, line 93: Called src_compile
* environment, line 4127: Called toolchain_src_compile
* environment, line 4787: Called gcc_do_make
* environment, line 2426: Called die
* The specific snippet of code:
* emake LDFLAGS="${LDFLAGS}" STAGE1_CFLAGS="${STAGE1_CFLAGS}" LIBPATH="${LIBPATH}" BOOT_CFLAGS="${BOOT_CFLAGS}" ${GCC_MAKE_TARGET} || die "emake failed with ${GCC_MAKE_TARGET}";
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.6.3'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.6.3'`.
*
* Please include /var/tmp/portage/sys-devel/gcc-4.6.3/work/build/gcc-build-logs.tar.bz2 in your bug report
*
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.6.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.6.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.6.3/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.6.3/work/build'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1230, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 214, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1290, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1235, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20130402/.catalyst_lock'
Full build log at /tmp/catalyst-auto.17528/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2013-03-05 7:02 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2013-03-05 7:02 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: gcc-4.6.3/gcc/host-default.c: Cannot open: No space left on device
tar: gcc-4.6.3/gcc/objcp: Cannot mkdir: No space left on device
tar: gcc-4.6.3/gcc/objcp: Cannot mkdir: No space left on device
tar: gcc-4.6.3/gcc/objcp/objcp-lang.c: Cannot open: No such file or directory
tar: gcc-4.6.3/gcc/objcp: Cannot mkdir: No space left on device
tar: gcc-4.6.3/gcc/objcp/ChangeLog: Cannot open: No such file or directory
tar: gcc-4.6.3/gcc/objcp: Cannot mkdir: No space left on device
tar: gcc-4.6.3/gcc/objcp/config-lang.in: Cannot open: No such file or directory
tar: gcc-4.6.3/gcc/objcp: Cannot mkdir: No space left on device
tar: gcc-4.6.3/gcc/objcp/lang-specs.h: Cannot open: No such file or directory
tar: gcc-4.6.3/gcc/objcp: Cannot mkdir: No space left on device
tar: gcc-4.6.3/gcc/objcp/objcp-decl.c: Cannot open: No such file or directory
tar: gcc-4.6.3/gcc/objcp: Cannot mkdir: No space left on device
tar: gcc-4.6.3/gcc/objcp/objcp-decl.h: Cannot open: No such file or directory
tar: gcc-4.6.3/gcc/objcp: Cannot mkdir: No space left on device
tar: gcc-4.6.3/gcc/objcp/Make-lang.in: Cannot open: No such file or directory
tar: gcc-4.6.3/gcc/cppdefault.h: Cannot open: No space left on device
tar: gcc-4.6.3/gcc/gimple-iterator.c: Cannot open: No space left on device
tar: gcc-4.6.3/gcc/tree-into-ssa.c: Cannot open: No space left on device
tar: gcc-4.6.3/gcc/tree-chrec.h: Cannot open: No space left on device
tar: gcc-4.6.3/ylwrap: Cannot open: No space left on device
tar: gcc-4.6.3/MD5SUMS: Cannot open: No space left on device
tar: Exiting with failure status due to previous errors
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* ERROR: sys-devel/gcc-4.6.3 failed (unpack phase):
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* failure unpacking gcc-4.6.3.tar.bz2
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
*
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* Call stack:
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* ebuild.sh, line 93: Called src_unpack
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* environment, line 4107: Called toolchain_src_unpack
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* environment, line 4860: Called gcc_quick_unpack
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* environment, line 2468: Called unpack 'gcc-4.6.3.tar.bz2'
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* phase-helpers.sh, line 345: Called __unpack_tar 'bzip2 -d'
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* phase-helpers.sh, line 315: Called __assert_sigpipe_ok 'failure unpacking gcc-4.6.3.tar.bz2'
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* isolated-functions.sh, line 39: Called die
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* The specific snippet of code:
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* [[ $x -ne 0 && $x -ne ${PORTAGE_SIGPIPE_STATUS:-141} ]] && die "$@"
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
*
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.6.3'`,
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.6.3'`.
/var/tmp/portage/sys-devel/gcc-4.6.3/temp/environment: line 4669: pushd: /var/tmp/portage/sys-devel/gcc-4.6.3/work/build: No such file or directory
tar: Cowardly refusing to create an empty archive
Try `tar --help' or `tar --usage' for more information.
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
*
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* Please include /var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-build-logs.tar.bz2 in your bug report
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
*
/usr/lib/portage/bin/isolated-functions.sh: line 217: /var/tmp/portage/sys-devel/gcc-4.6.3/.die_hooks: No space left on device
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.6.3/temp/build.log'.
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.6.3/temp/environment'.
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.6.3/work'
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/unpack: No space left on device
* S: '/var/tmp/portage/sys-devel/gcc-4.6.3/work/gcc-4.6.3'
Traceback (most recent call last):
File "/usr/lib/portage/bin/ebuild-ipc.py", line 228, in <module>
sys.exit(ebuild_ipc_main(sys.argv[1:]))
File "/usr/lib/portage/bin/ebuild-ipc.py", line 225, in ebuild_ipc_main
return ebuild_ipc.communicate(args)
File "/usr/lib/portage/bin/ebuild-ipc.py", line 82, in communicate
lock_obj = portage.locks.lockfile(self.ipc_lock_file, unlinkfile=True)
File "/usr/lib/portage/pym/portage/locks.py", line 103, in lockfile
myfd = os.open(lockfilename, os.O_CREAT|os.O_RDWR, 0o660)
File "/usr/lib/portage/pym/portage/__init__.py", line 246, in __call__
rval = self._func(*wrapped_args, **wrapped_kwargs)
OSError: [Errno 28] No space left on device: '/var/tmp/portage/sys-devel/gcc-4.6.3/.ipc_lock'
* The ebuild phase 'unpack' has exited unexpectedly. This type of behavior
* is known to be triggered by things such as failed variable assignments
* (bug #190128) or bad substitution errors (bug #200313). Normally, before
* exiting, bash should have displayed an error message above. If bash did
* not produce an error message above, it's possible that the ebuild has
* called `exit` when it should have called `die` instead. This behavior
* may also be triggered by a corrupt bash binary or a hardware problem
* such as memory or cpu malfunction. If the problem is not reproducible or
* it appears to occur randomly, then it is likely to be triggered by a
* hardware problem. If you suspect a hardware problem then you should try
* some basic hardware diagnostics such as memtest. Please do not report
* this as a bug unless it is consistently reproducible and you are sure
* that your bash binary and hardware are functioning properly.
/var/tmp/portage/sys-devel/gcc-4.6.3/temp/environment: line 4669: pushd: /var/tmp/portage/sys-devel/gcc-4.6.3/work/build: No such file or directory
tar: Cowardly refusing to create an empty archive
Try `tar --help' or `tar --usage' for more information.
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/other: No space left on device
*
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/other: No space left on device
* Please include /var/tmp/portage/sys-devel/gcc-4.6.3/gcc-build-logs.tar.bz2 in your bug report
/usr/lib/portage/bin/isolated-functions.sh: line 273: /var/tmp/portage/sys-devel/gcc-4.6.3/temp/logging/other: No space left on device
*
/var/tmp/portage/sys-devel/gcc-4.6.3/temp/environment: line 4674: popd: directory stack empty
/usr/lib/portage/bin/misc-functions.sh: line 1265: /var/tmp/portage/sys-devel/gcc-4.6.3/.die_hooks: No space left on device
Traceback (most recent call last):
File "/usr/lib/portage/bin/ebuild-ipc.py", line 228, in <module>
sys.exit(ebuild_ipc_main(sys.argv[1:]))
File "/usr/lib/portage/bin/ebuild-ipc.py", line 225, in ebuild_ipc_main
return ebuild_ipc.communicate(args)
File "/usr/lib/portage/bin/ebuild-ipc.py", line 82, in communicate
lock_obj = portage.locks.lockfile(self.ipc_lock_file, unlinkfile=True)
File "/usr/lib/portage/pym/portage/locks.py", line 103, in lockfile
myfd = os.open(lockfilename, os.O_CREAT|os.O_RDWR, 0o660)
File "/usr/lib/portage/pym/portage/__init__.py", line 246, in __call__
rval = self._func(*wrapped_args, **wrapped_kwargs)
OSError: [Errno 28] No space left on device: '/var/tmp/portage/sys-devel/gcc-4.6.3/.ipc_lock'
* The ebuild phase 'die_hooks' has exited unexpectedly. This type of
* behavior is known to be triggered by things such as failed variable
* assignments (bug #190128) or bad substitution errors (bug #200313).
* Normally, before exiting, bash should have displayed an error message
* above. If bash did not produce an error message above, it's possible
* that the ebuild has called `exit` when it should have called `die`
* instead. This behavior may also be triggered by a corrupt bash binary or
* a hardware problem such as memory or cpu malfunction. If the problem is
* not reproducible or it appears to occur randomly, then it is likely to
* be triggered by a hardware problem. If you suspect a hardware problem
* then you should try some basic hardware diagnostics such as memtest.
* Please do not report this as a bug unless it is consistently
* reproducible and you are sure that your bash binary and hardware are
* functioning properly.
* Messages for package sys-libs/timezone-data-2012j merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package sys-apps/coreutils-8.20 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.22.2 merged to /tmp/stage1root/:
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-libs/glibc-2.15-r3 merged to /tmp/stage1root/:
* Defaulting /etc/host.conf:multi to on
* Messages for package sys-devel/gcc-4.6.3 merged to /tmp/stage1root/:
*
* LTO support is still experimental and unstable.
* Any bugs resulting from the use of LTO will not be fixed.
*
* The ebuild phase 'unpack' has exited unexpectedly. This type of behavior
* is known to be triggered by things such as failed variable assignments
* (bug #190128) or bad substitution errors (bug #200313). Normally, before
* exiting, bash should have displayed an error message above. If bash did
* not produce an error message above, it's possible that the ebuild has
* called `exit` when it should have called `die` instead. This behavior
* may also be triggered by a corrupt bash binary or a hardware problem
* such as memory or cpu malfunction. If the problem is not reproducible or
* it appears to occur randomly, then it is likely to be triggered by a
* hardware problem. If you suspect a hardware problem then you should try
* some basic hardware diagnostics such as memtest. Please do not report
* this as a bug unless it is consistently reproducible and you are sure
* that your bash binary and hardware are functioning properly.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1230, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 214, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1290, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1235, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20130305/.catalyst_lock'
Full build log at /tmp/catalyst-auto.21010/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2013-02-19 3:26 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2013-02-19 3:26 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.12.2
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for ia64
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-ia64-2008.0.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20130219/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20130219/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-ia64-20130219/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-ia64-20130219/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-ia64-20130219/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20130219/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20130219/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ia64-20130219/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20130219/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ia64-20130219/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-ia64-2008.0.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-ia64-20130219/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20130219/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20130219/.catalyst_lock'
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-ia64-20130219///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to ./tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-ia64-20130219/./tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-ia64-20130219/./tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-ia64-20130219/
!!! Unable to parse profile: '/etc/make.profile'
!!! ParseError: Profile contains unsupported EAPI '5': '/usr/portage/profiles/eapi-5-files/eapi'
>>> Regenerating /etc/ld.so.cache...
!!! Unable to parse profile: '/etc/make.profile'
!!! ParseError: Profile contains unsupported EAPI '5': '/usr/portage/profiles/eapi-5-files/eapi'
!!! Unable to parse profile: '/etc/make.profile'
!!! ParseError: Profile contains unsupported EAPI '5': '/usr/portage/profiles/eapi-5-files/eapi'
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1230, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 214, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1290, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1235, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20130219/.catalyst_lock'
Full build log at /tmp/catalyst-auto.9174/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2012-11-06 6:22 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2012-11-06 6:22 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
File "/usr/lib/portage/bin/ebuild-ipc.py", line 296, in ebuild_ipc_main
return ebuild_ipc.communicate(args)
File "/usr/lib/portage/bin/ebuild-ipc.py", line 71, in communicate
lock_obj = portage.locks.lockfile(self.ipc_lock_file, unlinkfile=True)
File "/usr/lib/portage/pym/portage/locks.py", line 103, in lockfile
myfd = os.open(lockfilename, os.O_CREAT|os.O_RDWR, 0o660)
File "/usr/lib/portage/pym/portage/__init__.py", line 230, in __call__
rval = self._func(*wrapped_args, **wrapped_kwargs)
OSError: [Errno 28] No space left on device: '/var/tmp/portage/sys-devel/gcc-4.5.3-r2/.ipc_lock'
* The ebuild phase 'unpack' has exited unexpectedly. This type of behavior
* is known to be triggered by things such as failed variable assignments
* (bug #190128) or bad substitution errors (bug #200313). Normally, before
* exiting, bash should have displayed an error message above. If bash did
* not produce an error message above, it's possible that the ebuild has
* called `exit` when it should have called `die` instead. This behavior
* may also be triggered by a corrupt bash binary or a hardware problem
* such as memory or cpu malfunction. If the problem is not reproducible or
* it appears to occur randomly, then it is likely to be triggered by a
* hardware problem. If you suspect a hardware problem then you should try
* some basic hardware diagnostics such as memtest. Please do not report
* this as a bug unless it is consistently reproducible and you are sure
* that your bash binary and hardware are functioning properly.
/var/tmp/portage/sys-devel/gcc-4.5.3-r2/temp/environment: line 4624: pushd: /var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/build: No such file or directory
tar: Cowardly refusing to create an empty archive
Try `tar --help' or `tar --usage' for more information.
/usr/lib/portage/bin/isolated-functions.sh: line 277: /var/tmp/portage/sys-devel/gcc-4.5.3-r2/temp/logging/other: No space left on device
*
/usr/lib/portage/bin/isolated-functions.sh: line 277: /var/tmp/portage/sys-devel/gcc-4.5.3-r2/temp/logging/other: No space left on device
* Please include /var/tmp/portage/sys-devel/gcc-4.5.3-r2/gcc-build-logs.tar.bz2 in your bug report
/usr/lib/portage/bin/isolated-functions.sh: line 277: /var/tmp/portage/sys-devel/gcc-4.5.3-r2/temp/logging/other: No space left on device
*
/var/tmp/portage/sys-devel/gcc-4.5.3-r2/temp/environment: line 4629: popd: directory stack empty
/usr/lib/portage/bin/misc-functions.sh: line 1231: /var/tmp/portage/sys-devel/gcc-4.5.3-r2/.die_hooks: No space left on device
Traceback (most recent call last):
File "/usr/lib/portage/bin/ebuild-ipc.py", line 299, in <module>
sys.exit(ebuild_ipc_main(sys.argv[1:]))
File "/usr/lib/portage/bin/ebuild-ipc.py", line 296, in ebuild_ipc_main
return ebuild_ipc.communicate(args)
File "/usr/lib/portage/bin/ebuild-ipc.py", line 71, in communicate
lock_obj = portage.locks.lockfile(self.ipc_lock_file, unlinkfile=True)
File "/usr/lib/portage/pym/portage/locks.py", line 103, in lockfile
myfd = os.open(lockfilename, os.O_CREAT|os.O_RDWR, 0o660)
File "/usr/lib/portage/pym/portage/__init__.py", line 230, in __call__
rval = self._func(*wrapped_args, **wrapped_kwargs)
OSError: [Errno 28] No space left on device: '/var/tmp/portage/sys-devel/gcc-4.5.3-r2/.ipc_lock'
* The ebuild phase 'die_hooks' has exited unexpectedly. This type of
* behavior is known to be triggered by things such as failed variable
* assignments (bug #190128) or bad substitution errors (bug #200313).
* Normally, before exiting, bash should have displayed an error message
* above. If bash did not produce an error message above, it's possible
* that the ebuild has called `exit` when it should have called `die`
* instead. This behavior may also be triggered by a corrupt bash binary or
* a hardware problem such as memory or cpu malfunction. If the problem is
* not reproducible or it appears to occur randomly, then it is likely to
* be triggered by a hardware problem. If you suspect a hardware problem
* then you should try some basic hardware diagnostics such as memtest.
* Please do not report this as a bug unless it is consistently
* reproducible and you are sure that your bash binary and hardware are
* functioning properly.
* Messages for package sys-libs/timezone-data-2012f merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package sys-apps/coreutils-8.16 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.21.2 merged to /tmp/stage1root/:
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-libs/glibc-2.15-r3 merged to /tmp/stage1root/:
* Defaulting /etc/host.conf:multi to on
* Messages for package sys-devel/gcc-4.5.3-r2 merged to /tmp/stage1root/:
* The ebuild phase 'unpack' has exited unexpectedly. This type of behavior
* is known to be triggered by things such as failed variable assignments
* (bug #190128) or bad substitution errors (bug #200313). Normally, before
* exiting, bash should have displayed an error message above. If bash did
* not produce an error message above, it's possible that the ebuild has
* called `exit` when it should have called `die` instead. This behavior
* may also be triggered by a corrupt bash binary or a hardware problem
* such as memory or cpu malfunction. If the problem is not reproducible or
* it appears to occur randomly, then it is likely to be triggered by a
* hardware problem. If you suspect a hardware problem then you should try
* some basic hardware diagnostics such as memtest. Please do not report
* this as a bug unless it is consistently reproducible and you are sure
* that your bash binary and hardware are functioning properly.
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20121106/tmp/kerncache: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1199, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
/proc is still mounted; performing auto-bind-umount... !!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/stage1-ia64-20121106//tmp/kerncache failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20121106/tmp/kerncache: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20121106/tmp/stage1root/proc: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/stage1-ia64-20121106//tmp/kerncache
!!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/stage1-ia64-20121106//tmp/stage1root/proc failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20121106/tmp/stage1root/proc: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20121106/usr/portage: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/stage1-ia64-20121106//tmp/stage1root/proc
!!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/stage1-ia64-20121106//usr/portage failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20121106/usr/portage: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20121106/dev: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/stage1-ia64-20121106//usr/portage
!!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/stage1-ia64-20121106//dev failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20121106/dev: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20121106/proc: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/stage1-ia64-20121106//dev
!!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/stage1-ia64-20121106//proc failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20121106/proc: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/stage1-ia64-20121106//proc
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1259, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1204, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
None
!!! catalyst: Couldn't umount one or more bind-mounts; aborting for safety.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 614, in mount_safety_check
self.unbind()
File "modules/generic_stage_target.py", line 940, in unbind
"Couldn't umount one or more bind-mounts; aborting for safety."
CatalystError
None
!!! catalyst: Unable to auto-unbind /proc
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 208, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1261, in run
self.mount_safety_check()
File "modules/generic_stage_target.py", line 620, in mount_safety_check
raise CatalystError, "Unable to auto-unbind "+x
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20121106/.catalyst_lock'
Full build log at /catalyst-auto.6180/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2012-09-11 6:14 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2012-09-11 6:14 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
mv -f /var/tmp/portage/sys-libs/glibc-2.15-r2/image//usr/bin/sotruss.new /var/tmp/portage/sys-libs/glibc-2.15-r2/image//usr/bin/sotruss
.././scripts/mkinstalldirs /var/tmp/portage/sys-libs/glibc-2.15-r2/image//sbin
mkdir /var/tmp/portage/sys-libs/glibc-2.15-r2/image/sbin
/usr/bin/install -c /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/elf/sln /var/tmp/portage/sys-libs/glibc-2.15-r2/image//sbin/sln.new
mv -f /var/tmp/portage/sys-libs/glibc-2.15-r2/image//sbin/sln.new /var/tmp/portage/sys-libs/glibc-2.15-r2/image//sbin/sln
/usr/bin/install -c /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/elf/ldconfig /var/tmp/portage/sys-libs/glibc-2.15-r2/image//sbin/ldconfig.new
mv -f /var/tmp/portage/sys-libs/glibc-2.15-r2/image//sbin/ldconfig.new /var/tmp/portage/sys-libs/glibc-2.15-r2/image//sbin/ldconfig
(cd /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/elf/.; /usr/lib/gcc/ia64-unknown-linux-gnu/4.5.3/../../../../ia64-unknown-linux-gnu/bin/objdump -h dl-load.o dl-cache.o dl-lookup.o dl-object.o dl-reloc.o dl-deps.o dl-runtime.o dl-error.o dl-init.o dl-fini.o dl-debug.o dl-misc.o dl-version.o dl-profile.o dl-conflict.o dl-tls.o dl-origin.o dl-scope.o dl-execstack.o dl-open.o dl-close.o dl-trampoline.o dl-support.o dl-iteratephdr.o dl-addr.o enbl-secure.o dl-profstub.o dl-libc.o dl-sym.o dl-tsd.o dl-sysdep.o dl-static.o dl-symaddr.o dl-fptr.o dl-iteratephdr.os dl-addr.os dl-profstub.os dl-libc.os dl-sym.os dl-tsd.os rtld.os dl-load.os dl-cache.os dl-lookup.os dl-object.os dl-reloc.os dl-deps.os dl-runtime.os dl-error.os dl-init.os dl-fini.os dl-debug.os dl-misc.os dl-version.os dl-profile.os dl-conflict.os dl-tls.os dl-origin.os dl-scope.os dl-execstack.os dl-caller.os dl-open.os dl-close.os dl-trampoline.os dl-sysdep.os dl-environ.os dl-minimal
.os dl-static.os dl-symaddr.os dl-fptr.os dl-brk.os dl-sbrk.os dl-getcwd.os dl-openat64.os dl-opendir.os dl-fxstatat64.os soinit.os sofini.os interp.os cache.o readlib.o xmalloc.o xstrdup.o chroot_canon.o sotruss-lib.os sotruss-lib.so) | \
gawk '/\.gnu\.glibc-stub\./ { \
sub(/\.gnu\.glibc-stub\./, "", $2); \
stubs[$2] = 1; } \
END { for (s in stubs) print "#define __stub_" s }' > /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/elf/stubsT
mv -f /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/elf/stubsT /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/elf/stubs
make[2]: Leaving directory `/var/tmp/portage/sys-libs/glibc-2.15-r2/work/glibc-2.15/elf'
(sed '/^@/d' include/stubs-prologue.h; LC_ALL=C sort /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/csu/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/iconv/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/locale/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/localedata/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/iconvdata/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/assert/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/ctype/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/intl/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/catgets/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work
/build-default-ia64-unknown-linux-gnu-nptl/math/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/setjmp/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/signal/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/stdlib/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/stdio-common/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/libio/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/dlfcn/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/malloc/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/string/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/wcsmbs/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2
/work/build-default-ia64-unknown-linux-gnu-nptl/time/\0stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/dirent/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/grp/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/pwd/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/posix/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/io/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/termios/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/resource/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/misc/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/socket/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/bu
ild-default-ia64-unknown-linux-gnu-nptl/sysvipc/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/gmon/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/gnulib/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/wctype/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/manual/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/shadow/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/gshadow/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/po/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/argp/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/crypt/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-
default-ia64-unknown-linux-gnu-nptl/nptl/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia\064-unknown-linux-gnu-nptl/resolv/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/nss/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/rt/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/conform/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/debug/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/c_stubs/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/libidn/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/nptl_db/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/inet/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-defau
lt-ia64-unknown-linux-gnu-nptl/hesiod/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/sunrpc/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/nis/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/nscd/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/streams/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/login/stubs /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/elf/stubs) > /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/stubs.h
if test -r /var/tmp/portage/sys-libs/glibc-2.15-r2/image//usr/include/gnu/stubs.h && cmp -s /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/stubs.h /var/tmp/portage/sys-libs/glibc-2.15-r2/image//usr/include/gnu/stubs.h; \
then echo 'stubs.h unchanged'; \
else /usr/bin/install -c -m 644 /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/stubs.h /var/tmp/portage/sys-libs/glibc-2.15-r2/image//usr/include/gnu/stubs.h; fi
rm -f /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/stubs.h
/var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/elf/sln /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/elf/symlink.list
rm -f /var/tmp/portage/sys-libs/glibc-2.15-r2/work/build-default-ia64-unknown-linux-gnu-nptl/elf/symlink.list
make[1]: Leaving directory `/var/tmp/portage/sys-libs/glibc-2.15-r2/work/glibc-2.15'
ia64-unknown-linux-gnu-strip:/var/tmp/portage/sys-libs/glibc-2.15-r2/image/usr/lib/stT9Nd3s/wcswidth.o: No space left on device
ia64-unknown-linux-gnu-strip: cannot create tempdir for archive copying (error: No space left on device)
ia64-unknown-linux-gnu-strip:/var/tmp/portage/sys-libs/glibc-2.15-r2/image/usr/lib/libg.a: could not create temporary file to hold stripped copy: No error
ia64-unknown-linux-gnu-strip:/var/tmp/portage/sys-libs/glibc-2.15-r2/image/usr/lib/libcrypt.a: could not create temporary file to hold stripped copy: No error
ia64-unknown-linux-gnu-strip:/var/tmp/portage/sys-libs/glibc-2.15-r2/image/usr/lib/libc_stubs.a: could not create temporary file to hold stripped copy: No error
ia64-unknown-linux-gnu-strip:/var/tmp/portage/sys-libs/glibc-2.15-r2/image/usr/lib/libutil.a: could not create temporary file to hold stripped copy: No error
ia64-unknown-linux-gnu-strip:/var/tmp/portage/sys-libs/glibc-2.15-r2/image/usr/lib/libc_nonshared.a: could not create temporary file to hold stripped copy: No error
ia64-unknown-linux-gnu-strip:/var/tmp/portage/sys-libs/glibc-2.15-r2/image/usr/lib/librpcsvc.a: could not create temporary file to hold stripped copy: No error
ia64-unknown-linux-gnu-strip:/var/tmp/portage/sys-libs/glibc-2.15-r2/image/usr/lib/libieee.a: could not create temporary file to hold stripped copy: No error
ia64-unknown-linux-gnu-strip:/var/tmp/portage/sys-libs/glibc-2.15-r2/image/usr/lib/libBrokenLocale.a: could not create temporary file to hold stripped copy: No error
ia64-unknown-linux-gnu-strip:/var/tmp/portage/sys-libs/glibc-2.15-r2/image/usr/lib/libnsl.a: could not create temporary file to hold stripped copy: No error
ia64-unknown-linux-gnu-strip:/var/tmp/portage/sys-libs/glibc-2.15-r2/image/usr/lib/libdl.a: could not create temporary file to hold stripped copy: No error
ia64-unknown-linux-gnu-strip:/var/tmp/portage/sys-libs/glibc-2.15-r2/image/usr/lib/libm.a: could not create temporary file to hold stripped copy: No error
ia64-unknown-linux-gnu-strip:/var/tmp/portage/sys-libs/glibc-2.15-r2/image/usr/lib/librt.a: could not create temporary file to hold stripped copy: No error
ia64-unknown-linux-gnu-strip:/var/tmp/portage/sys-libs/glibc-2.15-r2/image/usr/lib/libmcheck.a: could not create temporary file to hold stripped copy: No error
/usr/lib/portage/bin/ebuild-helpers/prepstrip: line 300: /var/tmp/portage/sys-libs/glibc-2.15-r2/temp/prepstrip/debug.sources: No space left on device
/usr/lib/portage/bin/phase-functions.sh: line 558: IUSE: No space left on device
/usr/lib/portage/bin/phase-functions.sh: line 558: PF: No space left on device
/usr/lib/portage/bin/phase-functions.sh: line 558: SLOT: No space left on device
/usr/lib/portage/bin/phase-functions.sh: line 558: KEYWORDS: No space left on device
/usr/lib/portage/bin/phase-functions.sh: line 558: HOMEPAGE: No space left on device
/usr/lib/portage/bin/phase-functions.sh: line 558: DESCRIPTION: No space left on device
/usr/lib/portage/bin/phase-functions.sh: line 565: CBUILD: No space left on device
/usr/lib/portage/bin/phase-functions.sh: line 565: CC: No space left on device
/usr/lib/portage/bin/phase-functions.sh: line 565: CFLAGS: No space left on device
/usr/lib/portage/bin/phase-functions.sh: line 565: CHOST: No space left on device
/usr/lib/portage/bin/phase-functions.sh: line 565: CTARGET: No space left on device
/usr/lib/portage/bin/phase-functions.sh: line 565: CXXFLAGS: No space left on device
/usr/lib/portage/bin/phase-functions.sh: line 565: LDFLAGS: No space left on device
/usr/lib/portage/bin/phase-functions.sh: line 568: USE: No space left on device
/usr/lib/portage/bin/phase-functions.sh: line 569: EAPI: No space left on device
/usr/lib/portage/bin/phase-functions.sh: line 590: environment: No space left on device
* ERROR: sys-libs/glibc-2.15-r2 failed (install phase):
* save_ebuild_env failed
*
* Call stack:
* ebuild.sh, line 708: Called ebuild_main 'install'
* phase-functions.sh, line 955: Called dyn_install
* phase-functions.sh, line 591: Called assert 'save_ebuild_env failed'
* isolated-functions.sh, line 14: Called die
* The specific snippet of code:
* [[ $x -eq 0 ]] || die "$@"
*
* If you need support, post the output of `emerge --info '=sys-libs/glibc-2.15-r2'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/glibc-2.15-r2'`.
/usr/lib/portage/bin/isolated-functions.sh: line 216: /var/tmp/portage/sys-libs/glibc-2.15-r2/.die_hooks: No space left on device
* The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.15-r2/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.15-r2/temp/environment'.
* Working directory: '/var/tmp/portage/sys-libs/glibc-2.15-r2/build-info'
* S: '/var/tmp/portage/sys-libs/glibc-2.15-r2/work/glibc-2.15'
Traceback (most recent call last):
File "/usr/lib/portage/bin/ebuild-ipc.py", line 299, in <module>
sys.exit(ebuild_ipc_main(sys.argv[1:]))
File "/usr/lib/portage/bin/ebuild-ipc.py", line 296, in ebuild_ipc_main
return ebuild_ipc.communicate(args)
File "/usr/lib/portage/bin/ebuild-ipc.py", line 71, in communicate
lock_obj = portage.locks.lockfile(self.ipc_lock_file, unlinkfile=True)
File "/usr/lib/portage/pym/portage/locks.py", line 103, in lockfile
myfd = os.open(lockfilename, os.O_CREAT|os.O_RDWR, 0o660)
File "/usr/lib/portage/pym/portage/__init__.py", line 230, in __call__
rval = self._func(*wrapped_args, **wrapped_kwargs)
OSError: [Errno 28] No space left on device: '/var/tmp/portage/sys-libs/glibc-2.15-r2/.ipc_lock'
* The ebuild phase 'install' has exited unexpectedly. This type of
* behavior is known to be triggered by things such as failed variable
* assignments (bug #190128) or bad substitution errors (bug #200313).
* Normally, before exiting, bash should have displayed an error message
* above. If bash did not produce an error message above, it's possible
* that the ebuild has called `exit` when it should have called `die`
* instead. This behavior may also be triggered by a corrupt bash binary or
* a hardware problem such as memory or cpu malfunction. If the problem is
* not reproducible or it appears to occur randomly, then it is likely to
* be triggered by a hardware problem. If you suspect a hardware problem
* then you should try some basic hardware diagnostics such as memtest.
* Please do not report this as a bug unless it is consistently
* reproducible and you are sure that your bash binary and hardware are
* functioning properly.
/usr/lib/portage/bin/misc-functions.sh: line 1231: /var/tmp/portage/sys-libs/glibc-2.15-r2/.die_hooks: No space left on device
Traceback (most recent call last):
File "/usr/lib/portage/bin/ebuild-ipc.py", line 299, in <module>
sys.exit(ebuild_ipc_main(sys.argv[1:]))
File "/usr/lib/portage/bin/ebuild-ipc.py", line 296, in ebuild_ipc_main
return ebuild_ipc.communicate(args)
File "/usr/lib/portage/bin/ebuild-ipc.py", line 71, in communicate
lock_obj = portage.locks.lockfile(self.ipc_lock_file, unlinkfile=True)
File "/usr/lib/portage/pym/portage/locks.py", line 103, in lockfile
myfd = os.open(lockfilename, os.O_CREAT|os.O_RDWR, 0o660)
File "/usr/lib/portage/pym/portage/__init__.py", line 230, in __call__
rval = self._func(*wrapped_args, **wrapped_kwargs)
OSError: [Errno 28] No space left on device: '/var/tmp/portage/sys-libs/glibc-2.15-r2/.ipc_lock'
* The ebuild phase 'die_hooks' has exited unexpectedly. This type of
* behavior is known to be triggered by things such as failed variable
* assignments (bug #190128) or bad substitution errors (bug #200313).
* Normally, before exiting, bash should have displayed an error message
* above. If bash did not produce an error message above, it's possible
* that the ebuild has called `exit` when it should have called `die`
* instead. This behavior may also be triggered by a corrupt bash binary or
* a hardware problem such as memory or cpu malfunction. If the problem is
* not reproducible or it appears to occur randomly, then it is likely to
* be triggered by a hardware problem. If you suspect a hardware problem
* then you should try some basic hardware diagnostics such as memtest.
* Please do not report this as a bug unless it is consistently
* reproducible and you are sure that your bash binary and hardware are
* functioning properly.
* Messages for package sys-libs/timezone-data-2012c merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package sys-apps/coreutils-8.14 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.20.1-r2 merged to /tmp/stage1root/:
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-libs/glibc-2.15-r2 merged to /tmp/stage1root/:
* The ebuild phase 'install' has exited unexpectedly. This type of
* behavior is known to be triggered by things such as failed variable
* assignments (bug #190128) or bad substitution errors (bug #200313).
* Normally, before exiting, bash should have displayed an error message
* above. If bash did not produce an error message above, it's possible
* that the ebuild has called `exit` when it should have called `die`
* instead. This behavior may also be triggered by a corrupt bash binary or
* a hardware problem such as memory or cpu malfunction. If the problem is
* not reproducible or it appears to occur randomly, then it is likely to
* be triggered by a hardware problem. If you suspect a hardware problem
* then you should try some basic hardware diagnostics such as memtest.
* Please do not report this as a bug unless it is consistently
* reproducible and you are sure that your bash binary and hardware are
* functioning properly.
* ERROR: sys-libs/glibc-2.15-r2 failed (install phase):
* save_ebuild_env failed
*
* Call stack:
* ebuild.sh, line 708: Called ebuild_main 'install'
* phase-functions.sh, line 955: Called dyn_install
* phase-functions.sh, line 591: Called assert 'save_ebuild_env failed'
* isolated-functions.sh, line 14: Called die
* The specific snippet of code:
* [[ $x -eq 0 ]] || die "$@"
*
* If you need support, post the output of `emerge --info '=sys-libs/glibc-2.15-r2'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/glibc-2.15-r2'`.
* The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.15-r2/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.15-r2/temp/environment'.
* Working directory: '/var/tmp/portage/sys-libs/glibc-2.15-r2/build-info'
* S: '/var/tmp/portage/sys-libs/glibc-2.15-r2/work/glibc-2.15'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1194, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 206, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1254, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1199, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20120911/.catalyst_lock'
Full build log at /tmp/catalyst-auto.6297/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2012-06-19 3:38 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2012-06-19 3:38 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
ia64-unknown-linux-gnu-gcc -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -o lrtest ../obj_s/lrtest.o -Wl,-rpath,/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/lib -Wl,-O1 -Wl,--as-needed -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline
-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC `echo "-L../lib -lform -lmenu -lpanel -lncurses " | sed -e 's/-lform.*-lpanel[^ ]*//'` -lutil -lm
ia64-unknown-linux-gnu-gcc -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/movewindow.c -o ../obj_s/movewindow.o
ia64-unknown-linux-gnu-gcc -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -o movewindow ../obj_s/movewindow.o -Wl,-rpath,/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/lib -Wl,-O1 -Wl,--as-needed -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param ma
x-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC `echo "-L../lib -lform -lmenu -lpanel -lncurses " | sed -e 's/-lform.*-lpanel[^ ]*//'` -lutil -lm
ia64-unknown-linux-gnu-gcc -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/ncurses.c -o ../obj_s/ncurses.o
/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/ncurses.c: In function 'ShellOut':
/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/ncurses.c:493:11: warning: ignoring return value of 'system', declared with attribute warn_unused_result
ia64-unknown-linux-gnu-gcc -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -o ncurses ../obj_s/ncurses.o -Wl,-rpath,/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/lib -Wl,-O1 -Wl,--as-needed -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inli
ne-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC -L../lib -lform -lmenu -lpanel -lncurses -lutil -lm
ia64-unknown-linux-gnu-gcc -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/newdemo.c -o ../obj_s/newdemo.o
ia64-unknown-linux-gnu-gcc -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -o newdemo ../obj_s/newdemo.o -Wl,-rpath,/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/lib -Wl,-O1 -Wl,--as-needed -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inli
ne-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC `echo "-L../lib -lform -lmenu -lpanel -lncurses " | sed -e 's/-lform.*-lpanel[^ ]*//'` -lutil -lm
ia64-unknown-linux-gnu-gcc -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/railroad.c -o ../obj_s/railroad.o
ia64-unknown-linux-gnu-gcc -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -o railroad ../obj_s/railroad.o -Wl,-rpath,/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/lib -Wl,-O1 -Wl,--as-needed -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-in
line-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC -L../lib -lncurses -lutil -lm
ia64-unknown-linux-gnu-gcc -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/rain.c -o ../obj_s/rain.o
ia64-unknown-linux-gnu-gcc -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -o rain ../obj_s/rain.o -Wl,-rpath,/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/lib -Wl,-O1 -Wl,--as-needed -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline-ins
ns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC `echo "-L../lib -lform -lmenu -lpanel -lncurses " | sed -e 's/-lform.*-lpanel[^ ]*//'` -lutil -lm
ia64-unknown-linux-gnu-gcc -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/redraw.c -o ../obj_s/redraw.o
/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/redraw.c: In function 'test_redraw':
/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/redraw.c:116:12: warning: ignoring return value of 'system', declared with attribute warn_unused_result
ia64-unknown-linux-gnu-gcc -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -o redraw ../obj_s/redraw.o -Wl,-rpath,/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/lib -Wl,-O1 -Wl,--as-needed -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline
-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC `echo "-L../lib -lform -lmenu -lpanel -lncurses " | sed -e 's/-lform.*-lpanel[^ ]*//'` -lutil -lm
ia64-unknown-linux-gnu-gcc -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/savescreen.c -o ../obj_s/savescreen.o
ia64-unknown-linux-gnu-gcc -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -o savescreen ../obj_s/savescreen.o -Wl,-rpath,/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/lib -Wl,-O1 -Wl,--as-needed -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param ma
x-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC `echo "-L../lib -lform -lmenu -lpanel -lncurses " | sed -e 's/-lform.*-lpanel[^ ]*//'` -lutil -lm
ia64-unknown-linux-gnu-gcc -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/tclock.c -o ../obj_s/tclock.o
ia64-unknown-linux-gnu-gcc -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -o tclock ../obj_s/tclock.o -Wl,-rpath,/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/lib -Wl,-O1 -Wl,--as-needed -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline
-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC `echo "-L../lib -lform -lmenu -lpanel -lncurses " | sed -e 's/-lform.*-lpanel[^ ]*//'` -lutil -lm
ia64-unknown-linux-gnu-gcc -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/test_add_wchstr.c -o ../obj_s/test_add_wchstr.o
ia64-unknown-linux-gnu-gcc -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -o test_add_wchstr ../obj_s/test_add_wchstr.o -Wl,-rpath,/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/lib -Wl,-O1 -Wl,--as-needed -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe
--param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC `echo "-L../lib -lform -lmenu -lpanel -lncurses " | sed -e 's/-lform.*-lpanel[^ ]*//'` -lutil -lm
ia64-unknown-linux-gnu-gcc -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/test_addchstr.c -o ../obj_s/test_addchstr.o
ia64-unknown-linux-gnu-gcc -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -o test_addchstr ../obj_s/test_addchstr.o -Wl,-rpath,/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/lib -Wl,-O1 -Wl,--as-needed -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --pa
ram max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC `echo "-L../lib -lform -lmenu -lpanel -lncurses " | sed -e 's/-lform.*-lpanel[^ ]*//'` -lutil -lm
ia64-unknown-linux-gnu-gcc -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/test_addstr.c -o ../obj_s/test_addstr.o
ia64-unknown-linux-gnu-gcc -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -o test_addstr ../obj_s/test_addstr.o -Wl,-rpath,/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/lib -Wl,-O1 -Wl,--as-needed -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param
max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC `echo "-L../lib -lform -lmenu -lpanel -lncurses " | sed -e 's/-lform.*-lpanel[^ ]*//'` -lutil -lm
ia64-unknown-linux-gnu-gcc -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/test_addwstr.c -o ../obj_s/test_addwstr.o
ia64-unknown-linux-gnu-gcc -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -o test_addwstr ../obj_s/test_addwstr.o -Wl,-rpath,/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/lib -Wl,-O1 -Wl,--as-needed -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --para
m max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC `echo "-L../lib -lform -lmenu -lpanel -lncurses " | sed -e 's/-lform.*-lpanel[^ ]*//'` -lutil -lm
ia64-unknown-linux-gnu-gcc -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/test_arrays.c -o ../obj_s/test_arrays.o
ia64-unknown-linux-gnu-gcc -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -o test_arrays ../obj_s/test_arrays.o -Wl,-rpath,/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/lib -Wl,-O1 -Wl,--as-needed -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param
max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC -L../lib -lncurses -lutil -lm
ia64-unknown-linux-gnu-gcc -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/test_get_wstr.c -o ../obj_s/test_get_wstr.o
ia64-unknown-linux-gnu-gcc -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -o test_get_wstr ../obj_s/test_get_wstr.o -Wl,-rpath,/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/lib -Wl,-O1 -Wl,--as-needed -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --pa
ram max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC `echo "-L../lib -lform -lmenu -lpanel -lncurses " | sed -e 's/-lform.*-lpanel[^ ]*//'` -lutil -lm
ia64-unknown-linux-gnu-gcc -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/test_getstr.c -o ../obj_s/test_getstr.o
ia64-unknown-linux-gnu-gcc -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -o test_getstr ../obj_s/test_getstr.o -Wl,-rpath,/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/lib -Wl,-O1 -Wl,--as-needed -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param
max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC `echo "-L../lib -lform -lmenu -lpanel -lncurses " | sed -e 's/-lform.*-lpanel[^ ]*//'` -lutil -lm
ia64-unknown-linux-gnu-gcc -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/test_instr.c -o ../obj_s/test_instr.o
ia64-unknown-linux-gnu-gcc -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -o test_instr ../obj_s/test_instr.o -Wl,-rpath,/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/lib -Wl,-O1 -Wl,--as-needed -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param ma
x-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC `echo "-L../lib -lform -lmenu -lpanel -lncurses " | sed -e 's/-lform.*-lpanel[^ ]*//'` -lutil -lm
ia64-unknown-linux-gnu-gcc -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/test_inwstr.c -o ../obj_s/test_inwstr.o
ia64-unknown-linux-gnu-gcc -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -o test_inwstr ../obj_s/test_inwstr.o -Wl,-rpath,/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/lib -Wl,-O1 -Wl,--as-needed -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param
max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC `echo "-L../lib -lform -lmenu -lpanel -lncurses " | sed -e 's/-lform.*-lpanel[^ ]*//'` -lutil -lm
ia64-unknown-linux-gnu-gcc -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/test_opaque.c -o ../obj_s/test_opaque.o
ia64-unknown-linux-gnu-gcc -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -o test_opaque ../obj_s/test_opaque.o -Wl,-rpath,/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/lib -Wl,-O1 -Wl,--as-needed -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param
max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC `echo "-L../lib -lform -lmenu -lpanel -lncurses " | sed -e 's/-lform.*-lpanel[^ ]*//'` -lutil -lm
ia64-unknown-linux-gnu-gcc -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/testaddch.c -o ../obj_s/testaddch.o
ia64-unknown-linux-gnu-gcc -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -o testaddch ../obj_s/testaddch.o -Wl,-rpath,/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/lib -Wl,-O1 -Wl,--as-needed -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-
inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC `echo "-L../lib -lform -lmenu -lpanel -lncurses " | sed -e 's/-lform.*-lpanel[^ ]*//'` -lutil -lm
ia64-unknown-linux-gnu-gcc -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/testcurs.c -o ../obj_s/testcurs.o
ia64-unknown-linux-gnu-gcc -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -o testcurs ../obj_s/testcurs.o -Wl,-rpath,/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/lib -Wl,-O1 -Wl,--as-needed -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-in
line-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC `echo "-L../lib -lform -lmenu -lpanel -lncurses " | sed -e 's/-lform.*-lpanel[^ ]*//'` -lutil -lm
ia64-unknown-linux-gnu-gcc -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/testscanw.c -o ../obj_s/testscanw.o
ia64-unknown-linux-gnu-gcc -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -o testscanw ../obj_s/testscanw.o -Wl,-rpath,/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/lib -Wl,-O1 -Wl,--as-needed -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-
inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC `echo "-L../lib -lform -lmenu -lpanel -lncurses " | sed -e 's/-lform.*-lpanel[^ ]*//'` -lutil -lm
ia64-unknown-linux-gnu-gcc -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/view.c -o ../obj_s/view.o
ia64-unknown-linux-gnu-gcc -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -o view ../obj_s/view.o -Wl,-rpath,/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/lib -Wl,-O1 -Wl,--as-needed -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline-ins
ns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC `echo "-L../lib -lform -lmenu -lpanel -lncurses " | sed -e 's/-lform.*-lpanel[^ ]*//'` -lutil -lm
ia64-unknown-linux-gnu-gcc -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/worm.c -o ../obj_s/worm.o
ia64-unknown-linux-gnu-gcc -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -o worm ../obj_s/worm.o -Wl,-rpath,/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/lib -Wl,-O1 -Wl,--as-needed -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline-ins
ns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC `echo "-L../lib -lform -lmenu -lpanel -lncurses " | sed -e 's/-lform.*-lpanel[^ ]*//'` -lutil -lm
ia64-unknown-linux-gnu-gcc -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/xmas.c -o ../obj_s/xmas.o
ia64-unknown-linux-gnu-gcc -O2 -pipe --param max-inline-insns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -o xmas ../obj_s/xmas.o -Wl,-rpath,/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/lib -Wl,-O1 -Wl,--as-needed -I. -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test -I../test -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/test/../include -O2 -pipe --param max-inline-ins
ns-single=1200 -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wwrite-strings -Wdeclaration-after-statement -Wextra -Wno-unknown-pragmas -Wswitch-enum -fPIC `echo "-L../lib -lform -lmenu -lpanel -lncurses " | sed -e 's/-lform.*-lpanel[^ ]*//'` -lutil -lm
make[1]: Leaving directory `/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/test'
cd misc && make DESTDIR="" all
make[1]: Entering directory `/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/misc'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/misc'
cd c++ && make DESTDIR="" all
make[1]: Entering directory `/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/c++'
ia64-unknown-linux-gnu-g++ -I../c++ -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/c++ -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/c++/../include -O2 -pipe -W -Wall -Wabi -fabi-version=0 -Woverloaded-virtual -Wsign-promo -Wsynth -Wold-style-cast -Wcast-align -Wcast-qual -Wpointer-arith -Wshadow -Wundef -Wwrite-strings -Weffc++ -Wno-unused -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/c++/cursesf.cc -o ../obj_s/cursesf.o
ia64-unknown-linux-gnu-g++ -I../c++ -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/c++ -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/c++/../include -O2 -pipe -W -Wall -Wabi -fabi-version=0 -Woverloaded-virtual -Wsign-promo -Wsynth -Wold-style-cast -Wcast-align -Wcast-qual -Wpointer-arith -Wshadow -Wundef -Wwrite-strings -Weffc++ -Wno-unused -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/c++/cursesm.cc -o ../obj_s/cursesm.o
ia64-unknown-linux-gnu-g++ -I../c++ -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/c++ -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/c++/../include -O2 -pipe -W -Wall -Wabi -fabi-version=0 -Woverloaded-virtual -Wsign-promo -Wsynth -Wold-style-cast -Wcast-align -Wcast-qual -Wpointer-arith -Wshadow -Wundef -Wwrite-strings -Weffc++ -Wno-unused -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/c++/cursesw.cc -o ../obj_s/cursesw.o
ia64-unknown-linux-gnu-g++ -I../c++ -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/c++ -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/c++/../include -O2 -pipe -W -Wall -Wabi -fabi-version=0 -Woverloaded-virtual -Wsign-promo -Wsynth -Wold-style-cast -Wcast-align -Wcast-qual -Wpointer-arith -Wshadow -Wundef -Wwrite-strings -Weffc++ -Wno-unused -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/c++/cursespad.cc -o ../obj_s/cursespad.o
ia64-unknown-linux-gnu-g++ -I../c++ -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/c++ -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/c++/../include -O2 -pipe -W -Wall -Wabi -fabi-version=0 -Woverloaded-virtual -Wsign-promo -Wsynth -Wold-style-cast -Wcast-align -Wcast-qual -Wpointer-arith -Wshadow -Wundef -Wwrite-strings -Weffc++ -Wno-unused -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/c++/cursesp.cc -o ../obj_s/cursesp.o
ia64-unknown-linux-gnu-g++ -I../c++ -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/c++ -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/c++/../include -O2 -pipe -W -Wall -Wabi -fabi-version=0 -Woverloaded-virtual -Wsign-promo -Wsynth -Wold-style-cast -Wcast-align -Wcast-qual -Wpointer-arith -Wshadow -Wundef -Wwrite-strings -Weffc++ -Wno-unused -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/c++/cursslk.cc -o ../obj_s/cursslk.o
ia64-unknown-linux-gnu-g++ -I../c++ -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/c++ -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/c++/../include -O2 -pipe -W -Wall -Wabi -fabi-version=0 -Woverloaded-virtual -Wsign-promo -Wsynth -Wold-style-cast -Wcast-align -Wcast-qual -Wpointer-arith -Wshadow -Wundef -Wwrite-strings -Weffc++ -Wno-unused -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/c++/cursesapp.cc -o ../obj_s/cursesapp.o
ia64-unknown-linux-gnu-g++ -I../c++ -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/c++ -DHAVE_CONFIG_H -D_GNU_SOURCE -DXTSTRINGDEFINES -DNDEBUG -I. -I../include -I/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/c++/../include -O2 -pipe -W -Wall -Wabi -fabi-version=0 -Woverloaded-virtual -Wsign-promo -Wsynth -Wold-style-cast -Wcast-align -Wcast-qual -Wpointer-arith -Wshadow -Wundef -Wwrite-strings -Weffc++ -Wno-unused -fPIC -c /var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9/c++/cursesmain.cc -o ../obj_s/cursesmain.o
Assembler messages:
Fatal error: can't create ../obj_s/cursesmain.o: No space left on device
make[1]: *** [../obj_s/cursesmain.o] Error 2
make[1]: Leaving directory `/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/narrowc/c++'
make: *** [all] Error 2
emake failed
* ERROR: sys-libs/ncurses-5.9-r2 failed (compile phase):
* (no error message)
*
* Call stack:
* ebuild.sh, line 85: Called src_compile
* environment, line 2277: Called do_compile 'narrowc'
* environment, line 450: Called die
* The specific snippet of code:
* emake ${make_flags} || die
*
* If you need support, post the output of 'emerge --info =sys-libs/ncurses-5.9-r2',
* the complete build log and the output of 'emerge -pqv =sys-libs/ncurses-5.9-r2'.
/usr/lib/portage/bin/isolated-functions.sh: line 216: /var/tmp/portage/sys-libs/ncurses-5.9-r2/.die_hooks: No space left on device
* The complete build log is located at '/var/tmp/portage/sys-libs/ncurses-5.9-r2/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/ncurses-5.9-r2/temp/environment'.
* S: '/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9'
Traceback (most recent call last):
File "/usr/lib/portage/bin/ebuild-ipc.py", line 292, in <module>
sys.exit(ebuild_ipc_main(sys.argv[1:]))
File "/usr/lib/portage/bin/ebuild-ipc.py", line 289, in ebuild_ipc_main
return ebuild_ipc.communicate(args)
File "/usr/lib/portage/bin/ebuild-ipc.py", line 64, in communicate
lock_obj = portage.locks.lockfile(self.ipc_lock_file, unlinkfile=True)
File "/usr/lib/portage/pym/portage/locks.py", line 90, in lockfile
myfd = os.open(lockfilename, os.O_CREAT|os.O_RDWR, 0o660)
File "/usr/lib/portage/pym/portage/__init__.py", line 230, in __call__
rval = self._func(*wrapped_args, **wrapped_kwargs)
OSError: [Errno 28] No space left on device: '/var/tmp/portage/sys-libs/ncurses-5.9-r2/.ipc_lock'
* The ebuild phase 'compile' has exited unexpectedly. This type of
* behavior is known to be triggered by things such as failed variable
* assignments (bug #190128) or bad substitution errors (bug #200313).
* Normally, before exiting, bash should have displayed an error message
* above. If bash did not produce an error message above, it's possible
* that the ebuild has called `exit` when it should have called `die`
* instead. This behavior may also be triggered by a corrupt bash binary or
* a hardware problem such as memory or cpu malfunction. If the problem is
* not reproducible or it appears to occur randomly, then it is likely to
* be triggered by a hardware problem. If you suspect a hardware problem
* then you should try some basic hardware diagnostics such as memtest.
* Please do not report this as a bug unless it is consistently
* reproducible and you are sure that your bash binary and hardware are
* functioning properly.
/usr/lib/portage/bin/misc-functions.sh: line 1220: /var/tmp/portage/sys-libs/ncurses-5.9-r2/.die_hooks: No space left on device
Traceback (most recent call last):
File "/usr/lib/portage/bin/ebuild-ipc.py", line 292, in <module>
sys.exit(ebuild_ipc_main(sys.argv[1:]))
File "/usr/lib/portage/bin/ebuild-ipc.py", line 289, in ebuild_ipc_main
return ebuild_ipc.communicate(args)
File "/usr/lib/portage/bin/ebuild-ipc.py", line 64, in communicate
lock_obj = portage.locks.lockfile(self.ipc_lock_file, unlinkfile=True)
File "/usr/lib/portage/pym/portage/locks.py", line 90, in lockfile
myfd = os.open(lockfilename, os.O_CREAT|os.O_RDWR, 0o660)
File "/usr/lib/portage/pym/portage/__init__.py", line 230, in __call__
rval = self._func(*wrapped_args, **wrapped_kwargs)
OSError: [Errno 28] No space left on device: '/var/tmp/portage/sys-libs/ncurses-5.9-r2/.ipc_lock'
* The ebuild phase 'die_hooks' has exited unexpectedly. This type of
* behavior is known to be triggered by things such as failed variable
* assignments (bug #190128) or bad substitution errors (bug #200313).
* Normally, before exiting, bash should have displayed an error message
* above. If bash did not produce an error message above, it's possible
* that the ebuild has called `exit` when it should have called `die`
* instead. This behavior may also be triggered by a corrupt bash binary or
* a hardware problem such as memory or cpu malfunction. If the problem is
* not reproducible or it appears to occur randomly, then it is likely to
* be triggered by a hardware problem. If you suspect a hardware problem
* then you should try some basic hardware diagnostics such as memtest.
* Please do not report this as a bug unless it is consistently
* reproducible and you are sure that your bash binary and hardware are
* functioning properly.
* Messages for package sys-libs/ncurses-5.9-r2:
* The ebuild phase 'compile' has exited unexpectedly. This type of
* behavior is known to be triggered by things such as failed variable
* assignments (bug #190128) or bad substitution errors (bug #200313).
* Normally, before exiting, bash should have displayed an error message
* above. If bash did not produce an error message above, it's possible
* that the ebuild has called `exit` when it should have called `die`
* instead. This behavior may also be triggered by a corrupt bash binary or
* a hardware problem such as memory or cpu malfunction. If the problem is
* not reproducible or it appears to occur randomly, then it is likely to
* be triggered by a hardware problem. If you suspect a hardware problem
* then you should try some basic hardware diagnostics such as memtest.
* Please do not report this as a bug unless it is consistently
* reproducible and you are sure that your bash binary and hardware are
* functioning properly.
* ERROR: sys-libs/ncurses-5.9-r2 failed (compile phase):
* (no error message)
*
* Call stack:
* ebuild.sh, line 85: Called src_compile
* environment, line 2277: Called do_compile 'narrowc'
* environment, line 450: Called die
* The specific snippet of code:
* emake ${make_flags} || die
*
* If you need support, post the output of 'emerge --info =sys-libs/ncurses-5.9-r2',
* the complete build log and the output of 'emerge -pqv =sys-libs/ncurses-5.9-r2'.
* The complete build log is located at '/var/tmp/portage/sys-libs/ncurses-5.9-r2/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/ncurses-5.9-r2/temp/environment'.
* S: '/var/tmp/portage/sys-libs/ncurses-5.9-r2/work/ncurses-5.9'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1196, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 206, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1256, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1201, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20120619/.catalyst_lock'
Full build log at /tmp/catalyst-auto.9394/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2012-05-08 6:29 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2012-05-08 6:29 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* Checking linux-headers version (2.6.36 >= 2.6.9) ...
[ ok ]
* Applying Gentoo Glibc Patchset 2.14.1-8 ...
* 0020_all_glibc-tweak-rfc1918-lookup.patch ...
[ ok ]
* 0030_all_glibc-respect-env-CPPFLAGS.patch ...
[ ok ]
* 0050_all_glibc-2.14-leak-revert-crash.patch ...
[ ok ]
* 0052_all_glibc-2.14-resolv-hp-assert.patch ...
[ ok ]
* 0055_all_glibc-2.12-static-shared-getpagesize.patch ...
[ ok ]
* 0061_all_glibc-2.13-static-memset.patch ...
[ ok ]
* 0068_all_glibc-2.14-glibc-revert-fseek-on-fclose.patch ...
/var/tmp/portage/sys-libs/glibc-2.14.1-r3/temp/environment: line 1496: 7453 Aborted ${patch_cmd} --dry-run -f < "${PATCH_TARGET}" 2>&1
/var/tmp/portage/sys-libs/glibc-2.14.1-r3/temp/environment: line 1496: 7455 Aborted ${patch_cmd} --dry-run -f < "${PATCH_TARGET}" 2>&1
* Failed Patch: 0068_all_glibc-2.14-glibc-revert-fseek-on-fclose.patch !
* ( /var/tmp/portage/sys-libs/glibc-2.14.1-r3/work/patches/0068_all_glibc-2.14-glibc-revert-fseek-on-fclose.patch )
*
* Include in your bugreport the contents of:
*
* /var/tmp/portage/sys-libs/glibc-2.14.1-r3/temp/0068_all_glibc-2.14-glibc-revert-fseek-on-fclose.patch.out
* ERROR: sys-libs/glibc-2.14.1-r3 failed (unpack phase):
* Failed Patch: 0068_all_glibc-2.14-glibc-revert-fseek-on-fclose.patch!
*
* Call stack:
* ebuild.sh, line 85: Called src_unpack
* environment, line 3216: Called eblit-run 'src_unpack'
* environment, line 755: Called eblit-glibc-src_unpack
* src_unpack.eblit, line 168: Called toolchain-glibc_src_unpack
* src_unpack.eblit, line 142: Called epatch '/var/tmp/portage/sys-libs/glibc-2.14.1-r3/work/patches'
* environment, line 1602: Called die
* The specific snippet of code:
* die "Failed Patch: ${patchname}!";
*
* If you need support, post the output of 'emerge --info =sys-libs/glibc-2.14.1-r3',
* the complete build log and the output of 'emerge -pqv =sys-libs/glibc-2.14.1-r3'.
* The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.14.1-r3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.14.1-r3/temp/environment'.
* S: '/var/tmp/portage/sys-libs/glibc-2.14.1-r3/work/glibc-2.14.1'
* Messages for package sys-libs/timezone-data-2012c merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package dev-libs/libffi-3.0.10 merged to /tmp/stage1root/:
* Found a copy of second libffi in your system. Uninstall it before continuing.
* Messages for package net-misc/wget-1.12-r3 merged to /tmp/stage1root/:
* The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
* Messages for package sys-apps/coreutils-8.14 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-fs/udev-164-r2 merged to /tmp/stage1root/:
* Unable to find kernel sources at /tmp/stage1root/usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* CONFIG_BLK_DEV_BSG: is not set when it should be.
* Please check to make sure these options are set correctly.
* Failure to do so may cause unexpected problems.
*
* udev-164 does not support Linux kernel before version 2.6.25!
* For a reliable udev, use at least kernel 2.6.27
* Auto-adding 'udev-postmount' service to your default runlevel
*
* persistent-net does assigning fixed names to network devices.
* If you have problems with the persistent-net rules,
* just delete the rules file
* rm /tmp/stage1root/etc/udev/rules.d/70-persistent-net.rules
* and then reboot.
*
* This may however number your devices in a different way than they are now.
*
* If you build an initramfs including udev, then please
* make sure that the /sbin/udevadm binary gets included,
* and your scripts changed to use it,as it replaces the
* old helper apps udevinfo, udevtrigger, ...
*
* mount options for directory /dev are no longer
* set in /etc/udev/udev.conf, but in /etc/fstab
* as for other directories.
*
* If you use /dev/md/*, /dev/loop/* or /dev/rd/*,
* then please migrate over to using the device names
* /dev/md*, /dev/loop* and /dev/ram*.
* The devfs-compat rules have been removed.
* For reference see Bug #269359.
*
* Rules for /dev/hd* devices have been removed
* Please migrate to libata.
*
* For more information on udev on Gentoo, writing udev rules, and
* fixing known issues visit:
* http://www.gentoo.org/doc/en/udev-guide.xml
* Messages for package dev-libs/libxml2-2.7.8-r5 merged to /tmp/stage1root/:
* Skipping XML catalog creation for stage building (bug #208887).
* Messages for package dev-lang/perl-5.12.4-r1 merged to /tmp/stage1root/:
* Unable to establish /tmp/stage1root/usr/bin/ptar symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/ptar.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/ptardiff symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/ptardiff.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/shasum symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/shasum.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/cpan symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/cpan.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/cpanp symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/cpanp.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/cpan2dist symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/cpan2dist.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/cpanp-run-perl symlink
* Unable to establish /tmp/stage1root/usr/bin/enc2xs symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/enc2xs.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/piconv symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/piconv.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/instmodsh symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/instmodsh.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/xsubpp symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/xsubpp.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/config_data symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/config_data.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/corelist symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/corelist.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/pod2usage symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/pod2usage.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/podchecker symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/podchecker.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/podselect symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/podselect.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/prove symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/prove.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/pod2man.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/pod2text symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/pod2text.1.bz2 symlink
* Messages for package sys-libs/glibc-2.14.1-r3 merged to /tmp/stage1root/:
* Failed Patch: 0068_all_glibc-2.14-glibc-revert-fseek-on-fclose.patch !
* ( /var/tmp/portage/sys-libs/glibc-2.14.1-r3/work/patches/0068_all_glibc-2.14-glibc-revert-fseek-on-fclose.patch )
*
* Include in your bugreport the contents of:
*
* /var/tmp/portage/sys-libs/glibc-2.14.1-r3/temp/0068_all_glibc-2.14-glibc-revert-fseek-on-fclose.patch.out
* ERROR: sys-libs/glibc-2.14.1-r3 failed (unpack phase):
* Failed Patch: 0068_all_glibc-2.14-glibc-revert-fseek-on-fclose.patch!
*
* Call stack:
* ebuild.sh, line 85: Called src_unpack
* environment, line 3216: Called eblit-run 'src_unpack'
* environment, line 755: Called eblit-glibc-src_unpack
* src_unpack.eblit, line 168: Called toolchain-glibc_src_unpack
* src_unpack.eblit, line 142: Called epatch '/var/tmp/portage/sys-libs/glibc-2.14.1-r3/work/patches'
* environment, line 1602: Called die
* The specific snippet of code:
* die "Failed Patch: ${patchname}!";
*
* If you need support, post the output of 'emerge --info =sys-libs/glibc-2.14.1-r3',
* the complete build log and the output of 'emerge -pqv =sys-libs/glibc-2.14.1-r3'.
* The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.14.1-r3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.14.1-r3/temp/environment'.
* S: '/var/tmp/portage/sys-libs/glibc-2.14.1-r3/work/glibc-2.14.1'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1196, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 206, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1256, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1201, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20120508/.catalyst_lock'
Full build log at /tmp/catalyst-auto.13405/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2012-05-01 5:13 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2012-05-01 5:13 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Installing (14 of 73) app-misc/pax-utils-0.2.3 to /tmp/stage1root/
>>> Emerging (15 of 73) virtual/libintl-0 for /tmp/stage1root/
>>> Installing (15 of 73) virtual/libintl-0 to /tmp/stage1root/
>>> Emerging (16 of 73) dev-libs/libffi-3.0.10 for /tmp/stage1root/
>>> Installing (16 of 73) dev-libs/libffi-3.0.10 to /tmp/stage1root/
>>> Emerging (17 of 73) sys-kernel/linux-headers-2.6.39 for /tmp/stage1root/
>>> Installing (17 of 73) sys-kernel/linux-headers-2.6.39 to /tmp/stage1root/
>>> Emerging (18 of 73) sys-apps/net-tools-1.60_p20110409135728 for /tmp/stage1root/
>>> Installing (18 of 73) sys-apps/net-tools-1.60_p20110409135728 to /tmp/stage1root/
>>> Emerging (19 of 73) sys-devel/patch-2.6.1 for /tmp/stage1root/
>>> Installing (19 of 73) sys-devel/patch-2.6.1 to /tmp/stage1root/
>>> Emerging (20 of 73) sys-apps/gawk-3.1.8 for /tmp/stage1root/
>>> Installing (20 of 73) sys-apps/gawk-3.1.8 to /tmp/stage1root/
>>> Emerging (21 of 73) app-arch/tar-1.26 for /tmp/stage1root/
>>> Installing (21 of 73) app-arch/tar-1.26 to /tmp/stage1root/
>>> Emerging (22 of 73) sys-devel/make-3.82-r1 for /tmp/stage1root/
>>> Installing (22 of 73) sys-devel/make-3.82-r1 to /tmp/stage1root/
>>> Emerging (23 of 73) app-arch/gzip-1.4 for /tmp/stage1root/
>>> Installing (23 of 73) app-arch/gzip-1.4 to /tmp/stage1root/
>>> Emerging (24 of 73) net-misc/wget-1.12-r3 for /tmp/stage1root/
>>> Installing (24 of 73) net-misc/wget-1.12-r3 to /tmp/stage1root/
>>> Emerging (25 of 73) sys-apps/diffutils-3.0 for /tmp/stage1root/
>>> Installing (25 of 73) sys-apps/diffutils-3.0 to /tmp/stage1root/
>>> Emerging (26 of 73) sys-devel/m4-1.4.15 for /tmp/stage1root/
>>> Installing (26 of 73) sys-devel/m4-1.4.15 to /tmp/stage1root/
>>> Emerging (27 of 73) sys-devel/autoconf-wrapper-12 for /tmp/stage1root/
>>> Installing (27 of 73) sys-devel/autoconf-wrapper-12 to /tmp/stage1root/
>>> Emerging (28 of 73) dev-libs/expat-2.1.0_beta3 for /tmp/stage1root/
>>> Installing (28 of 73) dev-libs/expat-2.1.0_beta3 to /tmp/stage1root/
>>> Emerging (29 of 73) sys-devel/automake-wrapper-6 for /tmp/stage1root/
>>> Installing (29 of 73) sys-devel/automake-wrapper-6 to /tmp/stage1root/
>>> Emerging (30 of 73) sys-apps/makedev-3.23.1 for /tmp/stage1root/
>>> Installing (30 of 73) sys-apps/makedev-3.23.1 to /tmp/stage1root/
>>> Emerging (31 of 73) dev-libs/gmp-5.0.2_p1 for /tmp/stage1root/
>>> Installing (31 of 73) dev-libs/gmp-5.0.2_p1 to /tmp/stage1root/
>>> Emerging (32 of 73) sys-apps/texinfo-4.13 for /tmp/stage1root/
>>> Installing (32 of 73) sys-apps/texinfo-4.13 to /tmp/stage1root/
>>> Emerging (33 of 73) sys-process/psmisc-22.14 for /tmp/stage1root/
>>> Installing (33 of 73) sys-process/psmisc-22.14 to /tmp/stage1root/
>>> Emerging (34 of 73) sys-libs/readline-6.2_p1 for /tmp/stage1root/
>>> Installing (34 of 73) sys-libs/readline-6.2_p1 to /tmp/stage1root/
>>> Emerging (35 of 73) sys-devel/binutils-config-2-r1 for /tmp/stage1root/
>>> Installing (35 of 73) sys-devel/binutils-config-2-r1 to /tmp/stage1root/
>>> Emerging (36 of 73) sys-apps/sandbox-2.5 for /tmp/stage1root/
>>> Installing (36 of 73) sys-apps/sandbox-2.5 to /tmp/stage1root/
>>> Emerging (37 of 73) app-admin/eselect-1.2.18 for /tmp/stage1root/
>>> Installing (37 of 73) app-admin/eselect-1.2.18 to /tmp/stage1root/
>>> Emerging (38 of 73) virtual/libffi-0 for /tmp/stage1root/
>>> Installing (38 of 73) virtual/libffi-0 to /tmp/stage1root/
>>> Emerging (39 of 73) app-editors/nano-2.2.5 for /tmp/stage1root/
>>> Installing (39 of 73) app-editors/nano-2.2.5 to /tmp/stage1root/
>>> Emerging (40 of 73) sys-apps/grep-2.9 for /tmp/stage1root/
>>> Installing (40 of 73) sys-apps/grep-2.9 to /tmp/stage1root/
>>> Emerging (41 of 73) virtual/shadow-0 for /tmp/stage1root/
>>> Installing (41 of 73) virtual/shadow-0 to /tmp/stage1root/
>>> Emerging (42 of 73) net-misc/rsync-3.0.9 for /tmp/stage1root/
>>> Installing (42 of 73) net-misc/rsync-3.0.9 to /tmp/stage1root/
>>> Emerging (43 of 73) virtual/os-headers-0 for /tmp/stage1root/
>>> Installing (43 of 73) virtual/os-headers-0 to /tmp/stage1root/
>>> Emerging (44 of 73) sys-apps/less-444 for /tmp/stage1root/
>>> Installing (44 of 73) sys-apps/less-444 to /tmp/stage1root/
>>> Emerging (45 of 73) dev-libs/libxml2-2.7.8-r5 for /tmp/stage1root/
>>> Installing (45 of 73) dev-libs/libxml2-2.7.8-r5 to /tmp/stage1root/
>>> Emerging (46 of 73) sys-devel/flex-2.5.35_p10 for /tmp/stage1root/
>>> Installing (46 of 73) sys-devel/flex-2.5.35_p10 to /tmp/stage1root/
>>> Emerging (47 of 73) sys-devel/bison-2.4.3 for /tmp/stage1root/
>>> Installing (47 of 73) sys-devel/bison-2.4.3 to /tmp/stage1root/
>>> Emerging (48 of 73) sys-devel/libtool-2.4-r1 for /tmp/stage1root/
>>> Installing (48 of 73) sys-devel/libtool-2.4-r1 to /tmp/stage1root/
>>> Emerging (49 of 73) sys-libs/glibc-2.14.1-r3 for /tmp/stage1root/
>>> Failed to emerge sys-libs/glibc-2.14.1-r3 for /tmp/stage1root/, Log file:
>>> '/var/tmp/portage/sys-libs/glibc-2.14.1-r3/temp/build.log'
* Package: sys-libs/glibc-2.14.1-r3
* Repository: gentoo
* Maintainer: toolchain@gentoo.org
* USE: build elibc_glibc ia64 kernel_linux userland_GNU
* FEATURES: sandbox
* Checking gcc for __thread support ...
[ ok ]
* Checking kernel version (3.0.6 >= 2.6.9) ...
[ ok ]
* Checking linux-headers version (2.6.36 >= 2.6.9) ...
[ ok ]
* Applying Gentoo Glibc Patchset 2.14.1-7 ...
* 0020_all_glibc-tweak-rfc1918-lookup.patch ...
[ ok ]
* 0030_all_glibc-respect-env-CPPFLAGS.patch ...
[ ok ]
* 0050_all_glibc-2.14-leak-revert-crash.patch ...
[ ok ]
* 0052_all_glibc-2.14-resolv-hp-assert.patch ...
[ ok ]
* 0055_all_glibc-2.12-static-shared-getpagesize.patch ...
[ ok ]
* 0061_all_glibc-2.13-static-memset.patch ...
[ ok ]
* 0068_all_glibc-2.14-glibc-revert-fseek-on-fclose.patch ...
/var/tmp/portage/sys-libs/glibc-2.14.1-r3/temp/environment: line 1492: 17803 Aborted ${patch_cmd} --dry-run -f < "${PATCH_TARGET}" 2>&1
/var/tmp/portage/sys-libs/glibc-2.14.1-r3/temp/environment: line 1492: 17805 Aborted ${patch_cmd} --dry-run -f < "${PATCH_TARGET}" 2>&1
* Failed Patch: 0068_all_glibc-2.14-glibc-revert-fseek-on-fclose.patch !
* ( /var/tmp/portage/sys-libs/glibc-2.14.1-r3/work/patches/0068_all_glibc-2.14-glibc-revert-fseek-on-fclose.patch )
*
* Include in your bugreport the contents of:
*
* /var/tmp/portage/sys-libs/glibc-2.14.1-r3/temp/0068_all_glibc-2.14-glibc-revert-fseek-on-fclose.patch.out
* ERROR: sys-libs/glibc-2.14.1-r3 failed (unpack phase):
* Failed Patch: 0068_all_glibc-2.14-glibc-revert-fseek-on-fclose.patch!
*
* Call stack:
* ebuild.sh, line 85: Called src_unpack
* environment, line 3212: Called eblit-run 'src_unpack'
* environment, line 754: Called eblit-glibc-src_unpack
* src_unpack.eblit, line 168: Called toolchain-glibc_src_unpack
* src_unpack.eblit, line 142: Called epatch '/var/tmp/portage/sys-libs/glibc-2.14.1-r3/work/patches'
* environment, line 1598: Called die
* The specific snippet of code:
* die "Failed Patch: ${patchname}!";
*
* If you need support, post the output of 'emerge --info =sys-libs/glibc-2.14.1-r3',
* the complete build log and the output of 'emerge -pqv =sys-libs/glibc-2.14.1-r3'.
* The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.14.1-r3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.14.1-r3/temp/environment'.
* S: '/var/tmp/portage/sys-libs/glibc-2.14.1-r3/work/glibc-2.14.1'
* Messages for package sys-apps/coreutils-8.14 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-libs/timezone-data-2012c merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package dev-libs/libffi-3.0.10 merged to /tmp/stage1root/:
* Found a copy of second libffi in your system. Uninstall it before continuing.
* Messages for package net-misc/wget-1.12-r3 merged to /tmp/stage1root/:
* The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
* Messages for package dev-libs/libxml2-2.7.8-r5 merged to /tmp/stage1root/:
* Skipping XML catalog creation for stage building (bug #208887).
* Messages for package sys-libs/glibc-2.14.1-r3 merged to /tmp/stage1root/:
* Failed Patch: 0068_all_glibc-2.14-glibc-revert-fseek-on-fclose.patch !
* ( /var/tmp/portage/sys-libs/glibc-2.14.1-r3/work/patches/0068_all_glibc-2.14-glibc-revert-fseek-on-fclose.patch )
*
* Include in your bugreport the contents of:
*
* /var/tmp/portage/sys-libs/glibc-2.14.1-r3/temp/0068_all_glibc-2.14-glibc-revert-fseek-on-fclose.patch.out
* ERROR: sys-libs/glibc-2.14.1-r3 failed (unpack phase):
* Failed Patch: 0068_all_glibc-2.14-glibc-revert-fseek-on-fclose.patch!
*
* Call stack:
* ebuild.sh, line 85: Called src_unpack
* environment, line 3212: Called eblit-run 'src_unpack'
* environment, line 754: Called eblit-glibc-src_unpack
* src_unpack.eblit, line 168: Called toolchain-glibc_src_unpack
* src_unpack.eblit, line 142: Called epatch '/var/tmp/portage/sys-libs/glibc-2.14.1-r3/work/patches'
* environment, line 1598: Called die
* The specific snippet of code:
* die "Failed Patch: ${patchname}!";
*
* If you need support, post the output of 'emerge --info =sys-libs/glibc-2.14.1-r3',
* the complete build log and the output of 'emerge -pqv =sys-libs/glibc-2.14.1-r3'.
* The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.14.1-r3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.14.1-r3/temp/environment'.
* S: '/var/tmp/portage/sys-libs/glibc-2.14.1-r3/work/glibc-2.14.1'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1196, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 206, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1256, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1201, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20120501/.catalyst_lock'
Full build log at /tmp/catalyst-auto.4029/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2012-04-24 3:53 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2012-04-24 3:53 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.8
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2011 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for ia64
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-ia64-2008.0.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20120424/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20120424/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-ia64-20120424/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-ia64-20120424/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-ia64-20120424/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20120424/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20120424/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ia64-20120424/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20120424/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ia64-20120424/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-ia64-2008.0.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-ia64-20120424/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20120424/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20120424/.catalyst_lock'
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-ia64-20120424///tmp/stage1root/etc
copying make.profile to /var/tmp/catalyst/tmp/default/stage1-ia64-20120424///tmp/stage1root/etc
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-ia64-20120424/tmp/
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-ia64-20120424/tmp/
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-ia64-20120424/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.0.3 for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.0.3 to /tmp/stage1root/
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps --update sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.1.10.49
>>> Installing (1 of 1) sys-apps/portage-2.1.10.49
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep virtual/shadow sys-devel/binutils app-shells/bash sys-apps/net-tools sys-devel/patch sys-devel/flex sys-apps/gawk app-arch/tar sys-apps/sed sys-fs/udev sys-devel/bison sys-apps/texinfo sys-apps/file app-arch/bzip2 virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
>>> Verifying ebuild manifests
>>> Starting parallel fetch
>>> Emerging (1 of 73) sys-libs/ncurses-5.9 for /tmp/stage1root/
>>> Installing (1 of 73) sys-libs/ncurses-5.9 to /tmp/stage1root/
>>> Emerging (2 of 73) sys-libs/zlib-1.2.5-r2 for /tmp/stage1root/
>>> Installing (2 of 73) sys-libs/zlib-1.2.5-r2 to /tmp/stage1root/
>>> Emerging (3 of 73) virtual/libiconv-0 for /tmp/stage1root/
>>> Installing (3 of 73) virtual/libiconv-0 to /tmp/stage1root/
>>> Emerging (4 of 73) app-arch/bzip2-1.0.6-r3 for /tmp/stage1root/
>>> Installing (4 of 73) app-arch/bzip2-1.0.6-r3 to /tmp/stage1root/
>>> Emerging (5 of 73) sys-devel/gnuconfig-20120116 for /tmp/stage1root/
>>> Failed to emerge sys-devel/gnuconfig-20120116 for /tmp/stage1root/, Log file:
>>> '/var/tmp/portage/sys-devel/gnuconfig-20120116/temp/build.log'
!!! Insufficient space to store gnuconfig-20120116.tar.bz2 in /usr/portage/distfiles
!!! Insufficient privileges to use remaining space.
!!! You may set FEATURES="-userfetch" in /etc/make.conf in order to fetch with
!!! superuser privileges.
!!! Couldn't download 'gnuconfig-20120116.tar.bz2'. Aborting.
* Fetch failed for 'sys-devel/gnuconfig-20120116', Log file:
* '/var/tmp/portage/sys-devel/gnuconfig-20120116/temp/build.log'
* Messages for package sys-devel/gnuconfig-20120116 merged to /tmp/stage1root/:
* Fetch failed for 'sys-devel/gnuconfig-20120116', Log file:
* '/var/tmp/portage/sys-devel/gnuconfig-20120116/temp/build.log'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1196, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 206, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1256, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1201, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20120424/.catalyst_lock'
Full build log at /tmp/catalyst-auto.5251/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2012-04-17 3:34 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2012-04-17 3:34 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.7.1
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2011 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache metadata_overlay pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Use of metadata_overlay module for portage enabled.
Envscript support enabled.
Using target: stage1
Building natively for ia64
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-ia64-2008.0.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20120417/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20120417/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-ia64-20120417/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-ia64-20120417/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-ia64-20120417/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20120417/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20120417/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ia64-20120417/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20120417/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ia64-20120417/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-ia64-2008.0.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-ia64-20120417/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20120417/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20120417/.catalyst_lock'
--- Running action sequence: config_profile_link
Configuring profile link...
mkdir: cannot create directory `/var/tmp/catalyst/tmp/default/stage1-ia64-20120417//etc/portage/': File exists
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 210, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1268, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 818, in config_profile_link
cmd("mkdir "+self.settings["chroot_path"]+"/etc/portage/")
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20120417/.catalyst_lock'
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20120417/.catalyst_lock'
Full build log at /tmp/catalyst-auto.32471/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2012-04-10 3:34 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2012-04-10 3:34 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.7.1
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2011 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache metadata_overlay pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Use of metadata_overlay module for portage enabled.
Envscript support enabled.
Using target: stage1
Building natively for ia64
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-ia64-2008.0.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20120410/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20120410/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-ia64-20120410/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-ia64-20120410/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-ia64-20120410/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20120410/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20120410/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ia64-20120410/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20120410/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ia64-20120410/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-ia64-2008.0.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-ia64-20120410/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20120410/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20120410/.catalyst_lock'
--- Running action sequence: config_profile_link
Configuring profile link...
mkdir: cannot create directory `/var/tmp/catalyst/tmp/default/stage1-ia64-20120410//etc/portage/': File exists
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 210, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1268, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 818, in config_profile_link
cmd("mkdir "+self.settings["chroot_path"]+"/etc/portage/")
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20120410/.catalyst_lock'
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20120410/.catalyst_lock'
Full build log at /tmp/catalyst-auto.3138/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2012-01-10 6:07 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2012-01-10 6:07 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
File "/usr/lib/portage/pym/portage/__init__.py", line 215, in __call__
rval = self._func(*wrapped_args, **wrapped_kwargs)
OSError: [Errno 28] No space left on device: '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/.ipc_lock'
* The ebuild phase 'unpack' has exited unexpectedly. This type of behavior
* is known to be triggered by things such as failed variable assignments
* (bug #190128) or bad substitution errors (bug #200313). Normally, before
* exiting, bash should have displayed an error message above. If bash did
* not produce an error message above, it's possible that the ebuild has
* called `exit` when it should have called `die` instead. This behavior
* may also be triggered by a corrupt bash binary or a hardware problem
* such as memory or cpu malfunction. If the problem is not reproducible or
* it appears to occur randomly, then it is likely to be triggered by a
* hardware problem. If you suspect a hardware problem then you should try
* some basic hardware diagnostics such as memtest. Please do not report
* this as a bug unless it is consistently reproducible and you are sure
* that your bash binary and hardware are functioning properly.
/var/tmp/portage/sys-devel/gcc-4.5.3-r1/temp/environment: line 4699: pushd: /var/tmp/portage/sys-devel/gcc-4.5.3-r1/work/build: No such file or directory
tar: Cowardly refusing to create an empty archive
Try `tar --help' or `tar --usage' for more information.
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-devel/gcc-4.5.3-r1/temp/logging/other: No space left on device
*
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-devel/gcc-4.5.3-r1/temp/logging/other: No space left on device
* Please include /var/tmp/portage/sys-devel/gcc-4.5.3-r1/gcc-build-logs.tar.bz2 in your bug report
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-devel/gcc-4.5.3-r1/temp/logging/other: No space left on device
*
/var/tmp/portage/sys-devel/gcc-4.5.3-r1/temp/environment: line 4704: popd: directory stack empty
/usr/lib/portage/bin/misc-functions.sh: line 978: /var/tmp/portage/sys-devel/gcc-4.5.3-r1/.die_hooks: No space left on device
Traceback (most recent call last):
File "/usr/lib/portage/bin/ebuild-ipc.py", line 276, in <module>
sys.exit(ebuild_ipc_main(sys.argv[1:]))
File "/usr/lib/portage/bin/ebuild-ipc.py", line 273, in ebuild_ipc_main
return ebuild_ipc.communicate(args)
File "/usr/lib/portage/bin/ebuild-ipc.py", line 63, in communicate
lock_obj = portage.locks.lockfile(self.ipc_lock_file, unlinkfile=True)
File "/usr/lib/portage/pym/portage/locks.py", line 73, in lockfile
myfd = os.open(lockfilename, os.O_CREAT|os.O_RDWR, 0o660)
File "/usr/lib/portage/pym/portage/__init__.py", line 215, in __call__
rval = self._func(*wrapped_args, **wrapped_kwargs)
OSError: [Errno 28] No space left on device: '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/.ipc_lock'
* The ebuild phase 'die_hooks' has exited unexpectedly. This type of
* behavior is known to be triggered by things such as failed variable
* assignments (bug #190128) or bad substitution errors (bug #200313).
* Normally, before exiting, bash should have displayed an error message
* above. If bash did not produce an error message above, it's possible
* that the ebuild has called `exit` when it should have called `die`
* instead. This behavior may also be triggered by a corrupt bash binary or
* a hardware problem such as memory or cpu malfunction. If the problem is
* not reproducible or it appears to occur randomly, then it is likely to
* be triggered by a hardware problem. If you suspect a hardware problem
* then you should try some basic hardware diagnostics such as memtest.
* Please do not report this as a bug unless it is consistently
* reproducible and you are sure that your bash binary and hardware are
* functioning properly.
* Messages for package sys-apps/coreutils-8.7 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-libs/timezone-data-2011n merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package net-misc/wget-1.12-r3 merged to /tmp/stage1root/:
* The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
* Messages for package sys-devel/gcc-4.5.3-r1 merged to /tmp/stage1root/:
* The ebuild phase 'unpack' has exited unexpectedly. This type of behavior
* is known to be triggered by things such as failed variable assignments
* (bug #190128) or bad substitution errors (bug #200313). Normally, before
* exiting, bash should have displayed an error message above. If bash did
* not produce an error message above, it's possible that the ebuild has
* called `exit` when it should have called `die` instead. This behavior
* may also be triggered by a corrupt bash binary or a hardware problem
* such as memory or cpu malfunction. If the problem is not reproducible or
* it appears to occur randomly, then it is likely to be triggered by a
* hardware problem. If you suspect a hardware problem then you should try
* some basic hardware diagnostics such as memtest. Please do not report
* this as a bug unless it is consistently reproducible and you are sure
* that your bash binary and hardware are functioning properly.
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20120110/var/tmp/ccache: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1207, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
/proc is still mounted; performing auto-bind-umount... !!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/stage1-ia64-20120110//var/tmp/ccache failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20120110/var/tmp/ccache: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20120110/tmp/kerncache: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/stage1-ia64-20120110//var/tmp/ccache
!!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/stage1-ia64-20120110//tmp/kerncache failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20120110/tmp/kerncache: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20120110/tmp/stage1root/proc: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/stage1-ia64-20120110//tmp/kerncache
!!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/stage1-ia64-20120110//tmp/stage1root/proc failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20120110/tmp/stage1root/proc: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20120110/usr/portage: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/stage1-ia64-20120110//tmp/stage1root/proc
!!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/stage1-ia64-20120110//usr/portage failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20120110/usr/portage: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20120110/dev: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/stage1-ia64-20120110//usr/portage
!!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/stage1-ia64-20120110//dev failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20120110/dev: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20120110/proc: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/stage1-ia64-20120110//dev
!!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/stage1-ia64-20120110//proc failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20120110/proc: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/stage1-ia64-20120110//proc
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1212, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
None
!!! catalyst: Couldn't umount one or more bind-mounts; aborting for safety.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 609, in mount_safety_check
self.unbind()
File "modules/generic_stage_target.py", line 936, in unbind
"Couldn't umount one or more bind-mounts; aborting for safety."
CatalystError
None
!!! catalyst: Unable to auto-unbind /proc
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1265, in run
self.mount_safety_check()
File "modules/generic_stage_target.py", line 615, in mount_safety_check
raise CatalystError, "Unable to auto-unbind "+x
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20120110/.catalyst_lock'
Full build log at /tmp/catalyst-auto.2430/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2011-11-15 6:18 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2011-11-15 6:18 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* Applying Gentoo patches ...
* 00_all_gcc-4.1-alpha-mieee-default.patch ...
[ ok ]
* 01_all_gcc-4.1-alpha-asm-mcpu.patch ...
[ ok ]
* 03_all_gcc43-java-nomulti.patch ...
[ ok ]
* 08_all_gcc-4.1-cross-compile.patch ...
[ ok ]
* 09_all_gcc-4.5-Wtrampolines.patch ...
[ ok ]
* 10_all_gcc-default-format-security.patch ...
[ ok ]
* 10_all_gcc-default-fortify-source.patch ...
[ ok ]
* 11_all_gcc-netbsd-symbolic.patch ...
[ ok ]
* 14_all_gcc-sparc64-bsd.patch ...
[ ok ]
* 15_all_gcc-libgomp-no-werror.patch ...
[ ok ]
* 22_all_4.6_pr45094_arm-dword-move.patch ...
[ ok ]
* 23_all_4.6_pr45886_ARM_PCS_VFP.patch ...
[ ok ]
* 30_all_gcc-4.5-ppc-msingle-pic-base.patch ...
[ ok ]
* 31_all_gcc-4.4-ppc-fpic-mrelocatable.patch ...
[ ok ]
* 40_all_gcc-4.4-libiberty.h-asprintf.patch ...
[ ok ]
* 47_all_arm-unbreak-armv4t.patch ...
[ ok ]
* 51_all_gcc-3.4-libiberty-pic.patch ...
[ ok ]
* 53_all_gcc4-superh-default-multilib.patch ...
[ ok ]
* 61_all_gcc4-ia64-noteGNUstack.patch ...
[ ok ]
* 74_all_sh-pr24836.patch ...
[ ok ]
* 93_all_gcc-4.5-cloog-dl.patch ...
[ ok ]
* 94_all_gcc-4.5-pch-nostdinc.patch ...
[ ok ]
* 95_all_arm-pr43440.patch ...
[ ok ]
* 99_all_testsuite-01-Wformat.patch ...
[ ok ]
* 99_all_testsuite-02-Wtrampolines.patch ...
[ ok ]
* 99_all_testsuite-03-check-lto.patch ...
[ ok ]
* Done with patching
* Applying uClibc patches ...
* 90_all_100-uclibc-conf.patch ...
[ ok ]
* 90_all_301-missing-execinfo_h.patch ...
[ ok ]
* 90_all_302-c99-snprintf.patch ...
[ ok ]
* 90_all_305-libmudflap-susv3-legacy.patch ...
[ ok ]
* Done with patching
* Applying pie patches ...
* 10_all_gcc45_configure.patch ...
[ ok ]
* 11_all_gcc44_config.in.patch ...
[ ok ]
* 12_all_gcc45_Makefile.in.patch ...
[ ok ]
* 20_all_gcc45_gcc.c.patch ...
[ ok ]
* 21_all_gcc44_decl-tls-model.patch ...
[ ok ]
* 30_all_gcc44_esp.h.patch ...
[ ok ]
* 33_all_gcc45_config_rs6000_linux64.h.patch ...
[ ok ]
* 35_all_gcc44_config_crtbegints.patch ...
[ ok ]
* 40_all_gcc44_cp_lang-specs.h.patch ...
[ ok ]
* 41_all_gcc44_objc_lang-specs.h.patch ...
[ ok ]
* 42_all_gcc44_objcp_lang-specs.h.patch ...
[ ok ]
* 60_all_gcc44_invoke.texi.patch ...
[ ok ]
* Done with patching
* Running elibtoolize in: gcc-4.5.3/
* Applying portage/2.2 patch ...
* Applying sed/1.5.6 patch ...
* Applying as-needed/2.2.6 patch ...
* Using GNU config files from /usr/share/gnuconfig
* Updating libjava/libltdl/config.sub
[ ok ]
* Updating libjava/classpath/config.sub
[ ok ]
* Updating config.sub
[ ok ]
* Updating config.guess
[ ok ]
* Updating libjava/libltdl/config.guess
[ ok ]
* Updating libjava/classpath/config.guess
[ ok ]
* Fixing misc issues in configure files
* Applying gcc-configure-texinfo.patch ...
[ ok ]
* Touching generated files
* Touching gcc/cstamp-h.in
* Touching gcc/config.in
* Touching libjava/aclocal.m4
* Touching libjava/Makefile.in
* Touching libjava/configure
* Applying gcc-spec-env.patch ...
[ ok ]
* CFLAGS="-O2 -pipe"
* CXXFLAGS="-O2 -pipe"
* Configuring gcc ...
* We are migrating USE=nocxx to USE=cxx, but your USE settings do not make
* sense. Please make sure these two flags line up logically in your setup.
* ERROR: sys-devel/gcc-4.5.3-r1 failed (compile phase):
* USE='cxx nocxx' and USE='-cxx -nocxx' make no sense
*
* Call stack:
* ebuild.sh, line 56: Called src_compile
* environment, line 4592: Called toolchain_src_compile
* environment, line 5287: Called gcc_do_configure
* environment, line 2528: Called die
* The specific snippet of code:
* die "USE='cxx nocxx' and USE='-cxx -nocxx' make no sense";
*
* If you need support, post the output of 'emerge --info =sys-devel/gcc-4.5.3-r1',
* the complete build log and the output of 'emerge -pqv =sys-devel/gcc-4.5.3-r1'.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/temp/environment'.
* S: '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/work/gcc-4.5.3'
* Messages for package sys-apps/coreutils-8.7 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-libs/timezone-data-2011l merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package net-misc/wget-1.12-r3 merged to /tmp/stage1root/:
* The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
* Messages for package sys-devel/gcc-4.5.3-r1 merged to /tmp/stage1root/:
* We are migrating USE=nocxx to USE=cxx, but your USE settings do not make
* sense. Please make sure these two flags line up logically in your setup.
* ERROR: sys-devel/gcc-4.5.3-r1 failed (compile phase):
* USE='cxx nocxx' and USE='-cxx -nocxx' make no sense
*
* Call stack:
* ebuild.sh, line 56: Called src_compile
* environment, line 4592: Called toolchain_src_compile
* environment, line 5287: Called gcc_do_configure
* environment, line 2528: Called die
* The specific snippet of code:
* die "USE='cxx nocxx' and USE='-cxx -nocxx' make no sense";
*
* If you need support, post the output of 'emerge --info =sys-devel/gcc-4.5.3-r1',
* the complete build log and the output of 'emerge -pqv =sys-devel/gcc-4.5.3-r1'.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/temp/environment'.
* S: '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/work/gcc-4.5.3'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1207, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1212, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20111115/.catalyst_lock'
Full build log at /tmp/catalyst-auto.31163/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2011-10-11 6:41 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2011-10-11 6:41 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* error processing environment
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-devel/gcc-4.4.5/temp/logging/other: No space left on device
*
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-devel/gcc-4.4.5/temp/logging/other: No space left on device
* Call stack:
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-devel/gcc-4.4.5/temp/logging/other: No space left on device
* misc-functions.sh, line 17: Called source '/usr/lib/portage/bin/ebuild.sh'
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-devel/gcc-4.4.5/temp/logging/other: No space left on device
* ebuild.sh, line 1951: Called die
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-devel/gcc-4.4.5/temp/logging/other: No space left on device
* The specific snippet of code:
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-devel/gcc-4.4.5/temp/logging/other: No space left on device
* preprocess_ebuild_env || \
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-devel/gcc-4.4.5/temp/logging/other: No space left on device
* die "error processing environment"
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-devel/gcc-4.4.5/temp/logging/other: No space left on device
*
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-devel/gcc-4.4.5/temp/logging/other: No space left on device
* If you need support, post the output of 'emerge --info =sys-devel/gcc-4.4.5',
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-devel/gcc-4.4.5/temp/logging/other: No space left on device
* the complete build log and the output of 'emerge -pqv =sys-devel/gcc-4.4.5'.
/usr/lib/portage/bin/isolated-functions.sh: line 211: /var/tmp/portage/sys-devel/gcc-4.4.5/.die_hooks: No space left on device
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-devel/gcc-4.4.5/temp/logging/other: No space left on device
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.4.5/temp/build.log'.
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-devel/gcc-4.4.5/temp/logging/other: No space left on device
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.4.5/temp/environment'.
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-devel/gcc-4.4.5/temp/logging/other: No space left on device
* S: '/var/tmp/portage/sys-devel/gcc-4.4.5/work/gcc-4.4.5'
Traceback (most recent call last):
File "/usr/lib/portage/bin/ebuild-ipc.py", line 250, in <module>
sys.exit(ebuild_ipc_main(sys.argv[1:]))
File "/usr/lib/portage/bin/ebuild-ipc.py", line 247, in ebuild_ipc_main
return ebuild_ipc.communicate(args)
File "/usr/lib/portage/bin/ebuild-ipc.py", line 63, in communicate
lock_obj = portage.locks.lockfile(self.ipc_lock_file, unlinkfile=True)
File "/usr/lib/portage/pym/portage/locks.py", line 72, in lockfile
myfd = os.open(lockfilename, os.O_CREAT|os.O_RDWR, 0o660)
File "/usr/lib/portage/pym/portage/__init__.py", line 226, in __call__
rval = self._func(*wrapped_args, **wrapped_kwargs)
OSError: [Errno 28] No space left on device: '/var/tmp/portage/sys-devel/gcc-4.4.5/.ipc_lock'
* The ebuild phase 'die_hooks' has exited unexpectedly. This type of
* behavior is known to be triggered by things such as failed variable
* assignments (bug #190128) or bad substitution errors (bug #200313).
* Normally, before exiting, bash should have displayed an error message
* above. If bash did not produce an error message above, it's possible
* that the ebuild has called `exit` when it should have called `die`
* instead. This behavior may also be triggered by a corrupt bash binary or
* a hardware problem such as memory or cpu malfunction. If the problem is
* not reproducible or it appears to occur randomly, then it is likely to
* be triggered by a hardware problem. If you suspect a hardware problem
* then you should try some basic hardware diagnostics such as memtest.
* Please do not report this as a bug unless it is consistently
* reproducible and you are sure that your bash binary and hardware are
* functioning properly.
* Messages for package sys-libs/timezone-data-2011h merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package net-misc/wget-1.12-r3 merged to /tmp/stage1root/:
* The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
* Messages for package sys-apps/coreutils-8.7 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-devel/gcc-4.4.5 merged to /tmp/stage1root/:
* The ebuild phase 'unpack' has exited unexpectedly. This type of behavior
* is known to be triggered by things such as failed variable assignments
* (bug #190128) or bad substitution errors (bug #200313). Normally, before
* exiting, bash should have displayed an error message above. If bash did
* not produce an error message above, it's possible that the ebuild has
* called `exit` when it should have called `die` instead. This behavior
* may also be triggered by a corrupt bash binary or a hardware problem
* such as memory or cpu malfunction. If the problem is not reproducible or
* it appears to occur randomly, then it is likely to be triggered by a
* hardware problem. If you suspect a hardware problem then you should try
* some basic hardware diagnostics such as memtest. Please do not report
* this as a bug unless it is consistently reproducible and you are sure
* that your bash binary and hardware are functioning properly.
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20111011/tmp/kerncache: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1207, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
/proc is still mounted; performing auto-bind-umount... !!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/stage1-ia64-20111011//tmp/kerncache failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20111011/tmp/kerncache: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20111011/tmp/stage1root/proc: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/stage1-ia64-20111011//tmp/kerncache
!!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/stage1-ia64-20111011//tmp/stage1root/proc failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20111011/tmp/stage1root/proc: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20111011/dev/pts: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/stage1-ia64-20111011//tmp/stage1root/proc
!!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/stage1-ia64-20111011//dev/pts failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20111011/dev/pts: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20111011/usr/portage: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/stage1-ia64-20111011//dev/pts
!!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/stage1-ia64-20111011//usr/portage failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20111011/usr/portage: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20111011/dev: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/stage1-ia64-20111011//usr/portage
!!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/stage1-ia64-20111011//dev failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20111011/dev: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20111011/proc: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/stage1-ia64-20111011//dev
!!! catalyst: First attempt to unmount: /var/tmp/catalyst/tmp/default/stage1-ia64-20111011//proc failed.
!!! catalyst: Killing any pids still running in the chroot
Checking for processes running in chroot and killing them.
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
umount: /var/tmp/catalyst/tmp/default/stage1-ia64-20111011/proc: not mounted
cannot open /etc/mtab.tmp (No space left on device) - mtab not updated
!!! catalyst: Couldn't umount bind mount: /var/tmp/catalyst/tmp/default/stage1-ia64-20111011//proc
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1212, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
None
!!! catalyst: Couldn't umount one or more bind-mounts; aborting for safety.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 609, in mount_safety_check
self.unbind()
File "modules/generic_stage_target.py", line 936, in unbind
"Couldn't umount one or more bind-mounts; aborting for safety."
CatalystError
None
!!! catalyst: Unable to auto-unbind /proc
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1265, in run
self.mount_safety_check()
File "modules/generic_stage_target.py", line 615, in mount_safety_check
raise CatalystError, "Unable to auto-unbind "+x
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20111011/.catalyst_lock'
Full build log at /tmp/catalyst-auto.10712/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2011-08-09 3:29 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2011-08-09 3:29 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.6.918
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2011 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache metadata_overlay pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Use of metadata_overlay module for portage enabled.
Envscript support enabled.
Using target: stage1
Building natively for ia64
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-ia64-2008.0.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20110809/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20110809/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-ia64-20110809/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-ia64-20110809/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-ia64-20110809/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20110809/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20110809/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ia64-20110809/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20110809/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ia64-20110809/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-ia64-2008.0.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-ia64-20110809/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20110809/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20110809/.catalyst_lock'
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-ia64-20110809///tmp/stage1root/etc
copying make.profile to /var/tmp/catalyst/tmp/default/stage1-ia64-20110809///tmp/stage1root/etc
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-ia64-20110809/tmp/
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-ia64-20110809/tmp/
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-ia64-20110809/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.0.3 for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.0.3 to /tmp/stage1root/
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep >=sys-devel/binutils-2.18-r1 app-shells/bash sys-apps/net-tools sys-devel/patch sys-devel/flex sys-apps/gawk app-arch/tar sys-apps/sed sys-fs/udev sys-devel/bison sys-apps/texinfo sys-apps/file app-arch/bzip2 virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/shadow sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less >=sys-apps/baselayout-1.12.10-r5 virtual/libc sys-devel/autoconf sys-devel/gnuconfig >=sys-devel/gcc-3.2
[nomerge ] virtual/package-manager-0 to /tmp/stage1root/
[nomerge ] sys-apps/portage-2.1.10.3 to /tmp/stage1root/ USE="build (ipc) -doc -epydoc -less -python2 (-python3) (-selinux)" LINGUAS="-pl"
[nomerge ] dev-lang/python-2.7.1-r1 to /tmp/stage1root/ USE="build (wide-unicode) -berkdb -doc -examples -gdbm -ipv6 -ncurses -readline -sqlite -ssl -threads -tk -wininst -xml"
[nomerge ] dev-util/pkgconfig-0.26 USE="-hardened"
[ebuild N ] dev-libs/glib-2.28.6 USE="-debug -doc -fam (-introspection) (-selinux) -static-libs -test -xattr" 0 kB
[ebuild N ] dev-util/gtk-doc-am-1.16 0 kB
[ebuild N ] dev-util/pkgconfig-0.26 USE="-hardened" 0 kB
[ebuild N ] app-admin/python-updater-0.9 to /tmp/stage1root/ 0 kB
[ebuild N ] dev-lang/python-2.7.1-r1 to /tmp/stage1root/ USE="build (wide-unicode) -berkdb -doc -examples -gdbm -ipv6 -ncurses -readline -sqlite -ssl -threads -tk -wininst -xml" 0 kB
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/ 0 kB
[ebuild N ] sys-apps/portage-2.1.10.3 to /tmp/stage1root/ USE="build (ipc) -doc -epydoc -less -python2 (-python3) (-selinux)" LINGUAS="-pl" 0 kB
Total: 7 packages (7 new), Size of downloads: 0 kB
* Error: circular dependencies:
(dev-util/gtk-doc-am-1.16, ebuild scheduled for merge) depends on
(dev-util/pkgconfig-0.26, ebuild scheduled for merge) (buildtime)
(dev-libs/glib-2.28.6, ebuild scheduled for merge) (buildtime)
(dev-util/gtk-doc-am-1.16, ebuild scheduled for merge) (buildtime)
* Note that circular dependencies can often be avoided by temporarily
* disabling USE flags that trigger optional dependencies.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1207, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1212, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20110809/.catalyst_lock'
Full build log at /tmp/catalyst-auto.21223/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2011-08-02 3:28 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2011-08-02 3:28 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.6.918
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2011 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache metadata_overlay pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Use of metadata_overlay module for portage enabled.
Envscript support enabled.
Using target: stage1
Building natively for ia64
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-ia64-2008.0.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20110802/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20110802/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-ia64-20110802/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-ia64-20110802/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-ia64-20110802/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20110802/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20110802/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ia64-20110802/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20110802/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ia64-20110802/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-ia64-2008.0.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-ia64-20110802/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20110802/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20110802/.catalyst_lock'
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-ia64-20110802///tmp/stage1root/etc
copying make.profile to /var/tmp/catalyst/tmp/default/stage1-ia64-20110802///tmp/stage1root/etc
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-ia64-20110802/tmp/
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-ia64-20110802/tmp/
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-ia64-20110802/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.0.3 for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.0.3 to /tmp/stage1root/
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep >=sys-devel/binutils-2.18-r1 app-shells/bash sys-apps/net-tools sys-devel/patch sys-devel/flex sys-apps/gawk app-arch/tar sys-apps/sed sys-fs/udev sys-devel/bison sys-apps/texinfo sys-apps/file app-arch/bzip2 virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/shadow sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less >=sys-apps/baselayout-1.12.10-r5 virtual/libc sys-devel/autoconf sys-devel/gnuconfig >=sys-devel/gcc-3.2
[nomerge ] virtual/package-manager-0 to /tmp/stage1root/
[nomerge ] sys-apps/portage-2.1.10.3 to /tmp/stage1root/ USE="build (ipc) -doc -epydoc -less -python2 (-python3) (-selinux)" LINGUAS="-pl"
[nomerge ] dev-lang/python-2.7.1-r1 to /tmp/stage1root/ USE="build (wide-unicode) -berkdb -doc -examples -gdbm -ipv6 -ncurses -readline -sqlite -ssl -threads -tk -wininst -xml"
[nomerge ] dev-util/pkgconfig-0.26 USE="-hardened"
[ebuild N ] dev-libs/glib-2.28.6 USE="-debug -doc -fam (-introspection) (-selinux) -static-libs -test -xattr" 0 kB
[ebuild N ] dev-util/gtk-doc-am-1.16 0 kB
[ebuild N ] dev-util/pkgconfig-0.26 USE="-hardened" 0 kB
[ebuild N ] app-admin/python-updater-0.9 to /tmp/stage1root/ 0 kB
[ebuild N ] dev-lang/python-2.7.1-r1 to /tmp/stage1root/ USE="build (wide-unicode) -berkdb -doc -examples -gdbm -ipv6 -ncurses -readline -sqlite -ssl -threads -tk -wininst -xml" 0 kB
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/ 0 kB
[ebuild N ] sys-apps/portage-2.1.10.3 to /tmp/stage1root/ USE="build (ipc) -doc -epydoc -less -python2 (-python3) (-selinux)" LINGUAS="-pl" 0 kB
Total: 7 packages (7 new), Size of downloads: 0 kB
* Error: circular dependencies:
(dev-util/gtk-doc-am-1.16, ebuild scheduled for merge) depends on
(dev-util/pkgconfig-0.26, ebuild scheduled for merge) (buildtime)
(dev-libs/glib-2.28.6, ebuild scheduled for merge) (buildtime)
(dev-util/gtk-doc-am-1.16, ebuild scheduled for merge) (buildtime)
* Note that circular dependencies can often be avoided by temporarily
* disabling USE flags that trigger optional dependencies.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1207, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1212, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20110802/.catalyst_lock'
Full build log at /tmp/catalyst-auto.9813/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2011-07-26 3:28 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2011-07-26 3:28 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.6.916
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2011 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache metadata_overlay pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Use of metadata_overlay module for portage enabled.
Envscript support enabled.
Using target: stage1
Building natively for ia64
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-ia64-2008.0.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20110726/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20110726/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-ia64-20110726/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-ia64-20110726/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-ia64-20110726/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20110726/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20110726/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ia64-20110726/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20110726/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ia64-20110726/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-ia64-2008.0.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-ia64-20110726/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20110726/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20110726/.catalyst_lock'
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-ia64-20110726///tmp/stage1root/etc
copying make.profile to /var/tmp/catalyst/tmp/default/stage1-ia64-20110726///tmp/stage1root/etc
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-ia64-20110726/tmp/
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-ia64-20110726/tmp/
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-ia64-20110726/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.0.3 for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.0.3 to /tmp/stage1root/
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
* IMPORTANT: 2 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
* IMPORTANT: 2 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep >=sys-devel/binutils-2.18-r1 app-shells/bash sys-apps/net-tools sys-devel/patch sys-devel/flex sys-apps/gawk app-arch/tar sys-apps/sed sys-fs/udev sys-devel/bison sys-apps/texinfo sys-apps/file app-arch/bzip2 virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/shadow sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less >=sys-apps/baselayout-1.12.10-r5 virtual/libc sys-devel/autoconf sys-devel/gnuconfig >=sys-devel/gcc-3.2
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
[nomerge ] virtual/package-manager-0 to /tmp/stage1root/
[nomerge ] sys-apps/portage-2.1.10.3 to /tmp/stage1root/ USE="build (ipc) -doc -epydoc -less -python2 (-python3) (-selinux)" LINGUAS="-pl"
[nomerge ] dev-lang/python-2.7.1-r1 to /tmp/stage1root/ USE="build (wide-unicode) -berkdb -doc -examples -gdbm -ipv6 -ncurses -readline -sqlite -ssl -threads -tk -wininst -xml"
[nomerge ] dev-util/pkgconfig-0.26 USE="-hardened"
[ebuild N ] dev-libs/glib-2.28.6 USE="-debug -doc -fam (-introspection) (-selinux) -static-libs -test -xattr" 0 kB
[ebuild N ] dev-util/gtk-doc-am-1.16 0 kB
[ebuild N ] dev-util/pkgconfig-0.26 USE="-hardened" 0 kB
[ebuild N ] app-admin/python-updater-0.9 to /tmp/stage1root/ 0 kB
[ebuild N ] dev-lang/python-2.7.1-r1 to /tmp/stage1root/ USE="build (wide-unicode) -berkdb -doc -examples -gdbm -ipv6 -ncurses -readline -sqlite -ssl -threads -tk -wininst -xml" 0 kB
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/ 0 kB
[ebuild N ] sys-apps/portage-2.1.10.3 to /tmp/stage1root/ USE="build (ipc) -doc -epydoc -less -python2 (-python3) (-selinux)" LINGUAS="-pl" 0 kB
Total: 7 packages (7 new), Size of downloads: 0 kB
* Error: circular dependencies:
(dev-util/gtk-doc-am-1.16, ebuild scheduled for merge) depends on
(dev-util/pkgconfig-0.26, ebuild scheduled for merge) (buildtime)
(dev-libs/glib-2.28.6, ebuild scheduled for merge) (buildtime)
(dev-util/gtk-doc-am-1.16, ebuild scheduled for merge) (buildtime)
* Note that circular dependencies can often be avoided by temporarily
* disabling USE flags that trigger optional dependencies.
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1207, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1212, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20110726/.catalyst_lock'
Full build log at /tmp/catalyst-auto.6024/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2011-06-07 6:02 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2011-06-07 6:02 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
gzip -9n /var/tmp/portage/sys-libs/glibc-2.11.3/image//usr/share/i18n/charmaps/CSN_369103
.././scripts/mkinstalldirs /var/tmp/portage/sys-libs/glibc-2.11.3/image//usr/share/i18n/charmaps
rm -f /var/tmp/portage/sys-libs/glibc-2.11.3/image//usr/share/i18n/charmaps/CWI /var/tmp/portage/sys-libs/glibc-2.11.3/image//usr/share/i18n/charmaps/CWI.gz
/usr/bin/install -c -m 644 charmaps/CWI /var/tmp/portage/sys-libs/glibc-2.11.3/image//usr/share/i18n/charmaps/CWI
gzip -9n /var/tmp/portage/sys-libs/glibc-2.11.3/image//usr/share/i18n/charmaps/CWI
.././scripts/mkinstalldirs /var/tmp/portage/sys-libs/glibc-2.11.3/image//usr/share/i18n/charmaps
rm -f /var/tmp/portage/sys-libs/glibc-2.11.3/image//usr/share/i18n/charmaps/DEC-MCS /var/tmp/portage/sys-libs/glibc-2.11.3/image//usr/share/i18n/charmaps/DEC-MCS.gz
/usr/bin/install -c -m 644 charmaps/DEC-MCS /var/tmp/portage/sys-libs/glibc-2.11.3/image//usr/share/i18n/charmaps/DEC-MCS
gzip -9n /var/tmp/portage/sys-libs/glibc-2.11.3/image//usr/share/i18n/charmaps/DEC-MCS
.././scripts/mkinstalldirs /var/tmp/portage/sys-libs/glibc-2.11.3/image//usr/share/i18n/charmaps
rm -f /var/tmp/portage/sys-libs/glibc-2.11.3/image//usr/share/i18n/charmaps/DIN_66003 /var/tmp/portage/sys-libs/glibc-2.11.3/image//usr/share/i18n/charmaps/DIN_66003.gz
/usr/bin/install -c -m 644 charmaps/DIN_66003 /var/tmp/portage/sys-libs/glibc-2.11.3/image//usr/share/i18n/charmaps/DIN_66003
gzip -9n /var/tmp/portage/sys-libs/glibc-2.11.3/image//usr/share/i18n/charmaps/DIN_66003
gzip: /var/tmp/portage/sys-libs/glibc-2.11.3/image//usr/share/i18n/charmaps/DIN_66003.gz: No space left on device
make[2]: *** [/var/tmp/portage/sys-libs/glibc-2.11.3/image//usr/share/i18n/charmaps/DIN_66003.gz] Error 1
make[2]: Leaving directory `/var/tmp/portage/sys-libs/glibc-2.11.3/work/glibc-2.11.3/localedata'
make[1]: *** [localedata/subdir_install] Error 2
make[1]: Leaving directory `/var/tmp/portage/sys-libs/glibc-2.11.3/work/glibc-2.11.3'
make: *** [install] Error 2
emake failed
* ERROR: sys-libs/glibc-2.11.3 failed (install phase):
* (no error message)
*
* Call stack:
* ebuild.sh, line 56: Called src_install
* environment, line 3826: Called eblit-run 'src_install'
* environment, line 1164: Called eblit-glibc-src_install
* src_install.eblit, line 238: Called toolchain-glibc_src_install
* src_install.eblit, line 22: Called die
* The specific snippet of code:
* emake install_root="${install_root}" install || die
*
* If you need support, post the output of 'emerge --info =sys-libs/glibc-2.11.3',
* the complete build log and the output of 'emerge -pqv =sys-libs/glibc-2.11.3'.
/usr/lib/portage/bin/isolated-functions.sh: line 211: /var/tmp/portage/sys-libs/glibc-2.11.3/.die_hooks: No space left on device
* The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.11.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.11.3/temp/environment'.
* S: '/var/tmp/portage/sys-libs/glibc-2.11.3/work/glibc-2.11.3'
Traceback (most recent call last):
File "/usr/lib/portage/bin/ebuild-ipc.py", line 250, in <module>
sys.exit(ebuild_ipc_main(sys.argv[1:]))
File "/usr/lib/portage/bin/ebuild-ipc.py", line 247, in ebuild_ipc_main
return ebuild_ipc.communicate(args)
File "/usr/lib/portage/bin/ebuild-ipc.py", line 63, in communicate
lock_obj = portage.locks.lockfile(self.ipc_lock_file, unlinkfile=True)
File "/usr/lib/portage/pym/portage/locks.py", line 72, in lockfile
myfd = os.open(lockfilename, os.O_CREAT|os.O_RDWR, 0o660)
File "/usr/lib/portage/pym/portage/__init__.py", line 226, in __call__
rval = self._func(*wrapped_args, **wrapped_kwargs)
OSError: [Errno 28] No space left on device: '/var/tmp/portage/sys-libs/glibc-2.11.3/.ipc_lock'
* The ebuild phase 'install' has exited unexpectedly. This type of
* behavior is known to be triggered by things such as failed variable
* assignments (bug #190128) or bad substitution errors (bug #200313).
* Normally, before exiting, bash should have displayed an error message
* above. If bash did not produce an error message above, it's possible
* that the ebuild has called `exit` when it should have called `die`
* instead. This behavior may also be triggered by a corrupt bash binary or
* a hardware problem such as memory or cpu malfunction. If the problem is
* not reproducible or it appears to occur randomly, then it is likely to
* be triggered by a hardware problem. If you suspect a hardware problem
* then you should try some basic hardware diagnostics such as memtest.
* Please do not report this as a bug unless it is consistently
* reproducible and you are sure that your bash binary and hardware are
* functioning properly.
/usr/lib/portage/bin/ebuild.sh: line 1837: /var/tmp/portage/sys-libs/glibc-2.11.3/temp/environment.filtered: No space left on device
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-libs/glibc-2.11.3/temp/logging/other: No space left on device
* ERROR: sys-libs/glibc-2.11.3 failed:
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-libs/glibc-2.11.3/temp/logging/other: No space left on device
* error processing environment
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-libs/glibc-2.11.3/temp/logging/other: No space left on device
*
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-libs/glibc-2.11.3/temp/logging/other: No space left on device
* Call stack:
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-libs/glibc-2.11.3/temp/logging/other: No space left on device
* misc-functions.sh, line 17: Called source '/usr/lib/portage/bin/ebuild.sh'
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-libs/glibc-2.11.3/temp/logging/other: No space left on device
* ebuild.sh, line 1951: Called die
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-libs/glibc-2.11.3/temp/logging/other: No space left on device
* The specific snippet of code:
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-libs/glibc-2.11.3/temp/logging/other: No space left on device
* preprocess_ebuild_env || \
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-libs/glibc-2.11.3/temp/logging/other: No space left on device
* die "error processing environment"
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-libs/glibc-2.11.3/temp/logging/other: No space left on device
*
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-libs/glibc-2.11.3/temp/logging/other: No space left on device
* If you need support, post the output of 'emerge --info =sys-libs/glibc-2.11.3',
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-libs/glibc-2.11.3/temp/logging/other: No space left on device
* the complete build log and the output of 'emerge -pqv =sys-libs/glibc-2.11.3'.
/usr/lib/portage/bin/isolated-functions.sh: line 211: /var/tmp/portage/sys-libs/glibc-2.11.3/.die_hooks: No space left on device
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-libs/glibc-2.11.3/temp/logging/other: No space left on device
* The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.11.3/temp/build.log'.
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-libs/glibc-2.11.3/temp/logging/other: No space left on device
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.11.3/temp/environment'.
/usr/lib/portage/bin/isolated-functions.sh: line 264: /var/tmp/portage/sys-libs/glibc-2.11.3/temp/logging/other: No space left on device
* S: '/var/tmp/portage/sys-libs/glibc-2.11.3/work/glibc-2.11.3'
Traceback (most recent call last):
File "/usr/lib/portage/bin/ebuild-ipc.py", line 250, in <module>
sys.exit(ebuild_ipc_main(sys.argv[1:]))
File "/usr/lib/portage/bin/ebuild-ipc.py", line 247, in ebuild_ipc_main
return ebuild_ipc.communicate(args)
File "/usr/lib/portage/bin/ebuild-ipc.py", line 63, in communicate
lock_obj = portage.locks.lockfile(self.ipc_lock_file, unlinkfile=True)
File "/usr/lib/portage/pym/portage/locks.py", line 72, in lockfile
myfd = os.open(lockfilename, os.O_CREAT|os.O_RDWR, 0o660)
File "/usr/lib/portage/pym/portage/__init__.py", line 226, in __call__
rval = self._func(*wrapped_args, **wrapped_kwargs)
OSError: [Errno 28] No space left on device: '/var/tmp/portage/sys-libs/glibc-2.11.3/.ipc_lock'
* The ebuild phase 'die_hooks' has exited unexpectedly. This type of
* behavior is known to be triggered by things such as failed variable
* assignments (bug #190128) or bad substitution errors (bug #200313).
* Normally, before exiting, bash should have displayed an error message
* above. If bash did not produce an error message above, it's possible
* that the ebuild has called `exit` when it should have called `die`
* instead. This behavior may also be triggered by a corrupt bash binary or
* a hardware problem such as memory or cpu malfunction. If the problem is
* not reproducible or it appears to occur randomly, then it is likely to
* be triggered by a hardware problem. If you suspect a hardware problem
* then you should try some basic hardware diagnostics such as memtest.
* Please do not report this as a bug unless it is consistently
* reproducible and you are sure that your bash binary and hardware are
* functioning properly.
* Messages for package sys-apps/coreutils-8.7 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-libs/timezone-data-2011e merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package net-misc/wget-1.12-r3 merged to /tmp/stage1root/:
* The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
* Messages for package sys-libs/glibc-2.11.3 merged to /tmp/stage1root/:
* The ebuild phase 'install' has exited unexpectedly. This type of
* behavior is known to be triggered by things such as failed variable
* assignments (bug #190128) or bad substitution errors (bug #200313).
* Normally, before exiting, bash should have displayed an error message
* above. If bash did not produce an error message above, it's possible
* that the ebuild has called `exit` when it should have called `die`
* instead. This behavior may also be triggered by a corrupt bash binary or
* a hardware problem such as memory or cpu malfunction. If the problem is
* not reproducible or it appears to occur randomly, then it is likely to
* be triggered by a hardware problem. If you suspect a hardware problem
* then you should try some basic hardware diagnostics such as memtest.
* Please do not report this as a bug unless it is consistently
* reproducible and you are sure that your bash binary and hardware are
* functioning properly.
* ERROR: sys-libs/glibc-2.11.3 failed (install phase):
* (no error message)
*
* Call stack:
* ebuild.sh, line 56: Called src_install
* environment, line 3826: Called eblit-run 'src_install'
* environment, line 1164: Called eblit-glibc-src_install
* src_install.eblit, line 238: Called toolchain-glibc_src_install
* src_install.eblit, line 22: Called die
* The specific snippet of code:
* emake install_root="${install_root}" install || die
*
* If you need support, post the output of 'emerge --info =sys-libs/glibc-2.11.3',
* the complete build log and the output of 'emerge -pqv =sys-libs/glibc-2.11.3'.
* The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.11.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.11.3/temp/environment'.
* S: '/var/tmp/portage/sys-libs/glibc-2.11.3/work/glibc-2.11.3'
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1207, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1212, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20110607/.catalyst_lock'
Full build log at /tmp/catalyst-auto.9197/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2011-04-12 3:45 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2011-04-12 3:45 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: portage/media-sound/audio-entropyd/files/audio-entropyd.conf-2: Cannot open: No such file or directory
tar: portage/media-sound/audio-entropyd/files/audio-entropyd-2.0.1-ldflags.patch: Cannot open: No such file or directory
tar: portage/media-sound/audio-entropyd/files/audio-entropyd.init-2: Cannot open: No such file or directory
tar: portage/media-sound/audio-entropyd/files/audio-entropyd.init-1: Cannot open: No such file or directory
tar: portage/media-sound/audio-entropyd/files/audio-entropyd.conf-1: Cannot open: No such file or directory
tar: portage/media-sound/audio-entropyd/files/audio-entropyd-1.0.5-uclibc.patch: Cannot open: No such file or directory
tar: portage/media-sound/audio-entropyd/files/audio-entropyd-1.0.5-ldflags.patch: Cannot open: No such file or directory
tar: portage/media-sound/audio-entropyd/files/audio-entropyd-2.0.1-uclibc.patch: Cannot open: No such file or directory
tar: portage/media-sound/setmixer: Cannot mkdir: No such file or directory
tar: portage/media-sound/setmixer/Manifest: Cannot open: No such file or directory
tar: portage/media-sound/setmixer/setmixer-19941227_p1.ebuild: Cannot open: No such file or directory
tar: portage/media-sound/setmixer/ChangeLog: Cannot open: No such file or directory
tar: portage/media-sound/setmixer/metadata.xml: Cannot open: No such file or directory
tar: portage/media-sound/setmixer/files: Cannot mkdir: No such file or directory
tar: portage/media-sound/setmixer/files/setmixer.rc: Cannot open: No such file or directory
tar: portage/media-sound/aqualung: Cannot mkdir: No such file or directory
tar: portage/media-sound/aqualung/Manifest: Cannot open: No such file or directory
tar: portage/media-sound/aqualung/ChangeLog: Cannot open: No such file or directory
tar: portage/media-sound/aqualung/aqualung-0.9_beta11.ebuild: Cannot open: No such file or directory
tar: portage/media-sound/aqualung/metadata.xml: Cannot open: No such file or directory
tar: portage/media-sound/aqualung/aqualung-0.9_beta11-r1.ebuild: Cannot open: No such file or directory
tar: portage/media-sound/gtkguitune: Cannot mkdir: No such file or directory
tar: portage/media-sound/gtkguitune/gtkguitune-0.8.ebuild: Cannot open: No such file or directory
tar: portage/media-sound/gtkguitune/Manifest: Cannot open: No such file or directory
tar: portage/media-sound/gtkguitune/ChangeLog: Cannot open: No such file or directory
tar: portage/media-sound/gtkguitune/metadata.xml: Cannot open: No such file or directory
tar: portage/media-sound/edna: Cannot mkdir: No such file or directory
tar: portage/media-sound/edna/Manifest: Cannot open: No such file or directory
tar: portage/media-sound/edna/edna-0.5-r4.ebuild: Cannot open: No such file or directory
tar: portage/media-sound/edna/ChangeLog: Cannot open: No such file or directory
tar: portage/media-sound/edna/edna-0.6.ebuild: Cannot open: No such file or directory
tar: portage/media-sound/edna/metadata.xml: Cannot open: No such file or directory
tar: portage/media-sound/edna/files: Cannot mkdir: No such file or directory
tar: portage/media-sound/edna/files/edna-0.6-daemon.patch: Cannot open: No such file or directory
tar: portage/media-sound/edna/files/edna-0.6-syslog.patch: Cannot open: No such file or directory
tar: portage/media-sound/edna/files/edna.gentoo: Cannot open: No such file or directory
tar: portage/media-sound/edna/files/edna-0.6-SystemExit.patch: Cannot open: No such file or directory
tar: portage/media-sound/edna/files/edna-0.6-flac.patch: Cannot open: No such file or directory
tar: portage/media-sound/pitchtune: Cannot mkdir: No such file or directory
tar: portage/media-sound/pitchtune/Manifest: Cannot open: No such file or directory
tar: portage/media-sound/pitchtune/pitchtune-0.0.4.ebuild: Cannot open: No such file or directory
tar: portage/media-sound/pitchtune/ChangeLog: Cannot open: No such file or directory
tar: portage/media-sound/pitchtune/metadata.xml: Cannot open: No such file or directory
tar: portage/media-sound/bpmdetect: Cannot mkdir: No such file or directory
tar: portage/media-sound/bpmdetect/Manifest: Cannot open: No such file or directory
tar: portage/media-sound/bpmdetect/ChangeLog: Cannot open: No such file or directory
tar: portage/media-sound/bpmdetect/bpmdetect-0.6.1.ebuild: Cannot open: No such file or directory
tar: portage/media-sound/bpmdetect/metadata.xml: Cannot open: No such file or directory
tar: portage/media-sound/bpmdetect/files: Cannot mkdir: No such file or directory
tar: portage/media-sound/bpmdetect/files/bpmdetect-0.6.1-gcc44_and_fmodex_path.patch: Cannot open: No such file or directory
tar: portage/media-sound/alac_decoder: Cannot mkdir: No such file or directory
tar: portage/media-sound/alac_decoder/alac_decoder-0.1.3.ebuild: Cannot open: No such file or directory
tar: portage/media-sound/alac_decoder/Manifest: Cannot open: No such file or directory
tar: portage/media-sound/alac_decoder/ChangeLog: Cannot open: No such file or directory
tar: portage/media-sound/alac_decoder/alac_decoder-0.2.0.ebuild: Cannot open: No such file or directory
tar: portage/media-sound/alac_decoder/metadata.xml: Cannot open: No such file or directory
tar: portage/media-sound/amsynth: Cannot mkdir: No such file or directory
tar: portage/media-sound/amsynth/amsynth-1.2.3.ebuild: Cannot open: No such file or directory
tar: portage/media-sound/amsynth/amsynth-1.2.2.ebuild: Cannot open: No such file or directory
tar: portage/media-sound/amsynth/Manifest: Cannot open: No such file or directory
tar: portage/media-sound/amsynth/ChangeLog: Cannot open: No such file or directory
tar: portage/media-sound/amsynth/amsynth-1.2.0.ebuild: Cannot open: No such file or directory
tar: portage/media-sound/amsynth/metadata.xml: Cannot open: No such file or directory
tar: portage/media-sound/amsynth/files: Cannot mkdir: No such file or directory
tar: portage/media-sound/amsynth/files/amsynth-1.2.0-debug.patch: Cannot open: No such file or directory
tar: portage/media-sound/amsynth/files/amsynth-1.2.2-asneeded.patch: Cannot open: No such file or directory
tar: portage/media-sound/amsynth/files/amsynth-1.2.0-asneeded.patch: Cannot open: No such file or directory
tar: portage/media-sound/amsynth/files/amsynth-1.2.0-cflags.patch: Cannot open: No such file or directory
tar: portage/media-sound/amsynth/files/amsynth-1.2.0+gcc-4.3.patch: Cannot open: No such file or directory
tar: portage/media-sound/mimd: Cannot mkdir: No such file or directory
tar: portage/media-sound/mimd/mimd-0.30.1.ebuild: Cannot open: No such file or directory
tar: portage/media-sound/mimd/Manifest: Cannot open: No such file or directory
tar: portage/media-sound/mimd/ChangeLog: Cannot open: No such file or directory
tar: portage/media-sound/mimd/metadata.xml: Cannot open: No such file or directory
tar: portage/media-sound/mimd/files: Cannot mkdir: No such file or directory
tar: portage/media-sound/mimd/files/mimd-0.30.1+live-2006.12.08.patch: Cannot open: No such file or directory
tar: portage/media-sound/mimd/files/mimd-0.30.1-fortify_sources.patch: Cannot open: No such file or directory
tar: portage/media-sound/sonic-visualiser: Cannot mkdir: No such file or directory
tar: portage/media-sound/sonic-visualiser/sonic-visualiser-1.7.2.ebuild: Cannot open: No such file or directory
tar: portage/media-sound/sonic-visualiser/Manifest: Cannot open: No such file or directory
tar: portage/media-sound/sonic-visualiser/ChangeLog: Cannot open: No such file or directory
tar: portage/media-sound/sonic-visualiser/metadata.xml: Cannot open: No such file or directory
tar: portage/media-sound/sonic-visualiser/files: Cannot mkdir: No such file or directory
tar: portage/media-sound/sonic-visualiser/files/sonic-visualiser-1.7.1-liboggz11.patch: Cannot open: No such file or directory
tar: portage/media-sound/spek: Cannot mkdir: No such file or directory
tar: portage/media-sound/spek/Manifest: Cannot open: No such file or directory
tar: portage/media-sound/spek/ChangeLog: Cannot open: No such file or directory
tar: portage/media-sound/spek/metadata.xml: Cannot open: No such file or directory
tar: portage/media-sound/spek/spek-0.6.ebuild: Cannot open: No such file or directory
tar: portage/media-sound/mangler: Cannot mkdir: No such file or directory
tar: portage/media-sound/mangler/mangler-1.2.0.ebuild: Cannot open: No such file or directory
tar: portage/media-sound/mangler/Manifest: Cannot open: No such file or directory
tar: portage/media-sound/mangler/ChangeLog: Cannot open: No such file or directory
tar: portage/media-sound/mangler/mangler-1.2.1.ebuild: Cannot open: No such file or directory
tar: portage/media-sound/mangler/metadata.xml: Cannot open: No such file or directory
tar: portage/media-sound/mp3wrap: Cannot mkdir: No such file or directory
tar: portage/media-sound/mp3wrap/Manifest: Cannot open: No such file or directory
tar: portage/media-sound/mp3wrap/ChangeLog: Cannot open: No such file or directory
tar: portage/media-sound/mp3wrap/metadata.xml: Cannot open: No such file or directory
tar: portage/media-sound/mp3wrap/mp3wrap-0.5.ebuild: Cannot open: No such file or directory
tar: portage/media-sound/easytag: Cannot mkdir: No such file or directory
tar: portage/media-sound/easytag/easytag-2.1.6-r3.ebuild: Cannot open: No such file or directory
tar: portage/media-sound/easytag/Manifest: Cannot open: No such file or directory
tar: portage/media-sound/easytag/ChangeLog: Cannot open: No such file or directory
tar: portage/media-sound/easytag/easytag-2.1.6-r4.ebuild: Cannot open: No such file or directory
tar: portage/media-sound/easytag/metadata.xml: Cannot open: No such file or directory
tar: portage/media-sound/easytag/files: Cannot mkdir: No such file or directory
tar: portage/media-sound/easytag/files/easytag-2.1.6-cddb.patch: Cannot open: No such file or directory
tar: portage/media-sound/easytag/files/easytag-2.1.6-desktop_entry.patch: Cannot open: No such file or directory
tar: portage/media-sound/easytag/files/easytag-2.1.6-new_libmp4v2.patch: Cannot open: No such file or directory
tar: portage/media-sound/easytag/files/easytag-2.1.6-load-from-txt.patch: Cannot open: No such file or directory
tar: portage/media-sound/karlyriceditor: Cannot mkdir: No such file or directory
tar: portage/media-sound/karlyriceditor/karlyriceditor-0.7.ebuild: Cannot open: No such file or directory
tar: portage/media-sound/karlyriceditor/Manifest: Cannot open: No such file or directory
tar: portage/media-sound/karlyriceditor/ChangeLog: Cannot open: No such file or directory
tar: portage/media-sound/karlyriceditor/metadata.xml: Cannot open: No such file or directory
tar: portage/media-sound/tagtool: Cannot mkdir: No such file or directory
tar: portage/media-sound/tagtool/Manifest: Cannot open: No such file or directory
tar: portage/media-sound/tagtool/ChangeLog: Cannot open: No such file or directory
tar: portage/media-sound/tagtool/tagtool-0.12.3.ebuild: Cannot open: No such file or directory
tar: portage/media-sound/tagtool/metadata.xml: Cannot open: No such file or directory
tar: portage/java-virtuals: Cannot mkdir: No space left on device
tar: portage/java-virtuals/jmx: Cannot mkdir: No such file or directory
tar: portage/java-virtuals/jmx/Manifest: Cannot open: No such file or directory
tar: portage/java-virtuals/jmx/jmx-1.0.ebuild: Cannot open: No such file or directory
tar: portage/java-virtuals/jmx/ChangeLog: Cannot open: No such file or directory
tar: portage/java-virtuals/jmx/jmx-1.0-r1.ebuild: Cannot open: No such file or directory
tar: portage/java-virtuals/jmx/metadata.xml: Cannot open: No such file or directory
tar: portage/java-virtuals/jaf: Cannot mkdir: No such file or directory
tar: portage/java-virtuals/jaf/jaf-1.1-r1.ebuild: Cannot open: No such file or directory
tar: portage/java-virtuals/jaf/Manifest: Cannot open: No such file or directory
tar: portage/java-virtuals/jaf/ChangeLog: Cannot open: No such file or directory
tar: portage/java-virtuals/jaf/metadata.xml: Cannot open: No such file or directory
tar: portage/java-virtuals/jaxp-virtual: Cannot mkdir: No such file or directory
tar: portage/java-virtuals/jaxp-virtual/Manifest: Cannot open: No such file or directory
tar: portage/java-virtuals/jaxp-virtual/jaxp-virtual-1.4.ebuild: Cannot open: No such file or directory
tar: portage/java-virtuals/jaxp-virtual/ChangeLog: Cannot open: No such file or directory
tar: portage/java-virtuals/jaxp-virtual/metadata.xml: Cannot open: No such file or directory
tar: portage/java-virtuals/jaxp-virtual/jaxp-virtual-1.4-r1.ebuild: Cannot open: No such file or directory
tar: portage/java-virtuals/jdk-with-com-sun: Cannot mkdir: No such file or directory
tar: portage/java-virtuals/jdk-with-com-sun/jdk-with-com-sun-20100419.ebuild: Cannot open: No such file or directory
tar: portage/java-virtuals/jdk-with-com-sun/Manifest: Cannot open: No such file or directory
tar: portage/java-virtuals/jdk-with-com-sun/ChangeLog: Cannot open: No such file or directory
tar: portage/java-virtuals/jdk-with-com-sun/metadata.xml: Cannot open: No such file or directory
tar: portage/java-virtuals/jdk-with-com-sun/jdk-with-com-sun-20080505-r1.ebuild: Cannot open: No such file or directory
tar: portage/java-virtuals/servlet-api: Cannot mkdir: No such file or directory
tar: portage/java-virtuals/servlet-api/Manifest: Cannot open: No such file or directory
tar: portage/java-virtuals/servlet-api/ChangeLog: Cannot open: No such file or directory
tar: portage/java-virtuals/servlet-api/servlet-api-2.3.ebuild: Cannot open: No such file or directory
tar: portage/java-virtuals/servlet-api/servlet-api-2.4.ebuild: Cannot open: No such file or directory
tar: portage/java-virtuals/servlet-api/servlet-api-3.0.ebuild: Cannot open: No such file or directory
tar: portage/java-virtuals/servlet-api/servlet-api-2.5.ebuild: Cannot open: No such file or directory
tar: portage/java-virtuals/servlet-api/metadata.xml: Cannot open: No such file or directory
tar: portage/java-virtuals/servlet-api/servlet-api-2.2.ebuild: Cannot open: No such file or directory
tar: portage/java-virtuals/saaj-api: Cannot mkdir: No such file or directory
tar: portage/java-virtuals/saaj-api/saaj-api-1.3.ebuild: Cannot open: No such file or directory
tar: portage/java-virtuals/saaj-api/Manifest: Cannot open: No such file or directory
tar: portage/java-virtuals/saaj-api/ChangeLog: Cannot open: No such file or directory
tar: portage/java-virtuals/saaj-api/saaj-api-1.3-r1.ebuild: Cannot open: No such file or directory
tar: portage/java-virtuals/saaj-api/metadata.xml: Cannot open: No such file or directory
tar: portage/java-virtuals/transaction-api: Cannot mkdir: No such file or directory
tar: portage/java-virtuals/transaction-api/Manifest: Cannot open: No such file or directory
tar: portage/java-virtuals/transaction-api/ChangeLog: Cannot open: No such file or directory
tar: portage/java-virtuals/transaction-api/transaction-api-1.1.ebuild: Cannot open: No such file or directory
tar: portage/java-virtuals/transaction-api/metadata.xml: Cannot open: No such file or directory
tar: portage/java-virtuals/javamail: Cannot mkdir: No such file or directory
tar: portage/java-virtuals/javamail/Manifest: Cannot open: No such file or directory
tar: portage/java-virtuals/javamail/ChangeLog: Cannot open: No such file or directory
tar: portage/java-virtuals/javamail/javamail-1.0.ebuild: Cannot open: No such file or directory
tar: portage/java-virtuals/javamail/metadata.xml: Cannot open: No such file or directory
tar: portage/java-virtuals/javamail/javamail-1.0-r1.ebuild: Cannot open: No such file or directory
tar: portage/java-virtuals/jms: Cannot mkdir: No such file or directory
tar: portage/java-virtuals/jms/jms-1.1.ebuild: Cannot open: No such file or directory
tar: portage/java-virtuals/jms/Manifest: Cannot open: No such file or directory
tar: portage/java-virtuals/jms/ChangeLog: Cannot open: No such file or directory
tar: portage/java-virtuals/jms/metadata.xml: Cannot open: No such file or directory
tar: portage/java-virtuals/metadata.xml: Cannot open: No such file or directory
tar: portage/java-virtuals/stax-api: Cannot mkdir: No such file or directory
tar: portage/java-virtuals/stax-api/Manifest: Cannot open: No such file or directory
tar: portage/java-virtuals/stax-api/ChangeLog: Cannot open: No such file or directory
tar: portage/java-virtuals/stax-api/stax-api-1-r1.ebuild: Cannot open: No such file or directory
tar: portage/java-virtuals/stax-api/metadata.xml: Cannot open: No such file or directory
tar: Exiting with failure status due to previous errors
!!! catalyst: Error unpacking snapshot
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 791, in unpack_snapshot
cmd(unpack_cmd,unpack_errmsg,env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ia64-20110412/.catalyst_lock'
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20110412/.catalyst_lock'
Full build log at /tmp/catalyst-auto.21719/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec
@ 2011-02-01 3:20 catalyst
0 siblings, 0 replies; 57+ messages in thread
From: catalyst @ 2011-02-01 3:20 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.6.913
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2010 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume ccache kerncache metadata_overlay pkgcache seedcache snapcache"
Autoresuming support enabled.
Compiler cache support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Use of metadata_overlay module for portage enabled.
Envscript support enabled.
Using target: stage1
Building natively for ia64
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-ia64-2008.0.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20110201/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-ia64-20110201/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-ia64-20110201/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-ia64-20110201/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-ia64-20110201/
!!! catalyst: Compiler cache support can't be enabled (can't find /root/.ccache)
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 207, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/stage1_target.py", line 13, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 221, in __init__
ccdir+")"
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.18758/log/stage1.log
^ permalink raw reply [flat|nested] 57+ messages in thread
end of thread, other threads:[~2020-08-13 3:35 UTC | newest]
Thread overview: 57+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-09-26 3:12 [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage1.spec catalyst
-- strict thread matches above, loose matches on Subject: below --
2020-08-13 3:35 catalyst
2020-05-15 4:08 catalyst
2020-05-14 3:46 catalyst
2020-05-13 3:26 catalyst
2020-04-27 3:43 catalyst
2019-10-06 20:06 catalyst
2019-10-04 20:03 catalyst
2019-09-27 3:11 catalyst
2019-09-25 3:12 catalyst
2019-09-24 3:11 catalyst
2019-09-23 3:11 catalyst
2019-09-22 3:14 catalyst
2018-03-15 3:20 catalyst
2018-01-31 3:16 catalyst
2018-01-26 8:13 catalyst
2016-01-19 4:21 catalyst
2015-12-22 5:10 catalyst
2015-12-15 5:04 catalyst
2015-12-08 5:04 catalyst
2015-12-01 5:04 catalyst
2015-03-24 4:56 catalyst
2015-03-17 3:38 catalyst
2015-02-03 4:58 catalyst
2015-01-27 5:06 catalyst
2015-01-20 5:00 catalyst
2014-04-08 3:25 catalyst
2014-01-28 3:44 catalyst
2014-01-21 3:48 catalyst
2014-01-14 19:06 catalyst
2014-01-07 18:19 catalyst
2013-12-31 18:21 catalyst
2013-10-08 3:43 catalyst
2013-10-01 7:27 catalyst
2013-08-20 9:07 catalyst
2013-06-25 3:46 catalyst
2013-04-30 6:47 catalyst
2013-04-02 7:16 catalyst
2013-03-05 7:02 catalyst
2013-02-19 3:26 catalyst
2012-11-06 6:22 catalyst
2012-09-11 6:14 catalyst
2012-06-19 3:38 catalyst
2012-05-08 6:29 catalyst
2012-05-01 5:13 catalyst
2012-04-24 3:53 catalyst
2012-04-17 3:34 catalyst
2012-04-10 3:34 catalyst
2012-01-10 6:07 catalyst
2011-11-15 6:18 catalyst
2011-10-11 6:41 catalyst
2011-08-09 3:29 catalyst
2011-08-02 3:28 catalyst
2011-07-26 3:28 catalyst
2011-06-07 6:02 catalyst
2011-04-12 3:45 catalyst
2011-02-01 3:20 catalyst
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox