* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-05-04 7:17 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-05-04 7:17 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20160504/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20160504/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20160504/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20160504/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20160504/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20160504/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20160504/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20160504///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20160504//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20160504//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20160504/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/binutils sys-apps/file sys-apps/which sys-devel/gnuconfig sys-apps/findutils app-arch/gzip sys-devel/patch virtual/editor sys-apps/sed virtual/package-manager sys-devel/gettext sys-devel/automake sys-apps/diffutils sys-apps/grep net-misc/rsync sys-apps/net-tools sys-devel/autoconf net-misc/wget virtual/os-headers sys-apps/baselayout sys-apps/coreutils virtual/libc sys-devel/bison app-arch/tar app-arch/xz-utils app-arch/bzip2 sys-devel/libtool sys-devel/make sys-apps/gawk app-shells/bash:0 sys-apps/makedev virtual/shadow sys-apps/less sys-devel/flex sys-devel/gcc virtual/pkgconfig
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.0-r5 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.56 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r3 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r2 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p42-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.4.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.19 to /tmp/stage1root/
[ebuild N ] app-admin/python-updater-0.11 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.16.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/libc-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.4 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-libs/glibc-2.22-r4::gentoo
# required by virtual/libc-0::gentoo
# required by virtual/libc (argument)
=sys-apps/gentoo-functions-0.10 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20160504/.catalyst_lock'
Command exited with non-zero status 1
83.91user 19.85system 1:41.84elapsed 101%CPU (0avgtext+0avgdata 170064maxresident)k
0inputs+0outputs (395major+2194077minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.bFrTNZ/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-05-28 7:18 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-05-28 7:18 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20160528/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20160528/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20160528/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20160528/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20160528/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20160528/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20160528/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20160528///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20160528//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20160528//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20160528/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/patch sys-devel/gcc sys-devel/autoconf virtual/os-headers virtual/editor sys-devel/binutils sys-devel/libtool sys-apps/net-tools sys-devel/gnuconfig app-arch/xz-utils sys-apps/gawk sys-devel/automake sys-apps/diffutils sys-apps/less net-misc/wget app-arch/gzip sys-apps/makedev app-arch/bzip2 sys-devel/bison sys-devel/gettext sys-devel/make virtual/shadow sys-devel/flex sys-apps/which sys-apps/coreutils app-shells/bash:0 sys-apps/findutils sys-apps/file sys-apps/grep sys-apps/baselayout sys-apps/sed app-arch/tar virtual/pkgconfig virtual/libc virtual/package-manager net-misc/rsync
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.0-r5 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.56 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r2 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p42-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.4.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.21 to /tmp/stage1root/
[ebuild N ] app-admin/python-updater-0.11 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.16.3-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/libc-0 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.4 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by dev-lang/perl-5.20.2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r4::gentoo
=app-admin/perl-cleaner-2.21 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20160528/.catalyst_lock'
Command exited with non-zero status 1
89.27user 21.16system 1:53.93elapsed 96%CPU (0avgtext+0avgdata 168784maxresident)k
0inputs+0outputs (394major+2400222minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20160528.U9RLoY/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-05-29 9:20 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-05-29 9:20 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20160529/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20160529/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20160529/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20160529/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20160529/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20160529/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20160529/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20160529///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20160529//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20160529//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20160529/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot virtual/package-manager sys-devel/libtool sys-apps/grep virtual/os-headers net-misc/rsync virtual/shadow sys-apps/baselayout sys-devel/flex sys-devel/make sys-devel/gettext virtual/libc sys-apps/gawk app-arch/xz-utils sys-devel/patch virtual/editor sys-apps/net-tools sys-devel/autoconf sys-apps/findutils app-arch/gzip sys-devel/automake app-shells/bash:0 app-arch/tar sys-apps/makedev sys-devel/gnuconfig sys-apps/which sys-apps/diffutils sys-apps/sed sys-apps/coreutils virtual/pkgconfig sys-devel/binutils sys-devel/bison app-arch/bzip2 sys-apps/file sys-devel/gcc sys-apps/less net-misc/wget
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016c to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.0-r5 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.56 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r2 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p42-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.4.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.22 to /tmp/stage1root/
[ebuild N ] app-admin/python-updater-0.11 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/libc-0 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.16.3-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.4 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by dev-lang/perl-5.20.2::gentoo
# required by perl-core/Data-Dumper-2.154.0::gentoo
# required by virtual/perl-Data-Dumper-2.154.0::gentoo
=app-admin/perl-cleaner-2.22 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20160529/.catalyst_lock'
Command exited with non-zero status 1
110.60user 32.74system 27:13.87elapsed 8%CPU (0avgtext+0avgdata 169920maxresident)k
0inputs+0outputs (391major+2410843minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20160529.di0WFd/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-08-03 7:21 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-08-03 7:21 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20160803/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20160803/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20160803/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20160803/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20160803/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20160803///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20160803//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20160803//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20160803/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-libs/timezone-data-2016e::gentoo
>>> Installing (1 of 1) sys-libs/timezone-data-2016e::gentoo
* Messages for package sys-libs/timezone-data-2016e:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot net-misc/wget app-arch/xz-utils sys-devel/patch net-misc/rsync app-arch/bzip2 sys-apps/gawk sys-apps/which virtual/package-manager sys-devel/gnuconfig sys-apps/net-tools app-arch/tar virtual/editor virtual/os-headers virtual/libc sys-devel/gcc app-arch/gzip sys-apps/findutils sys-apps/coreutils sys-apps/grep virtual/shadow sys-devel/gettext sys-apps/baselayout sys-devel/flex sys-devel/binutils sys-devel/make app-shells/bash:0 sys-apps/makedev sys-devel/automake sys-devel/libtool sys-apps/less sys-apps/file sys-devel/bison sys-apps/diffutils sys-devel/autoconf virtual/pkgconfig sys-apps/sed
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r2 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p42-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] virtual/libc-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.7::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/expat-2.2.0-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20160803/.catalyst_lock'
Command exited with non-zero status 1
106.43user 25.42system 2:03.85elapsed 106%CPU (0avgtext+0avgdata 171712maxresident)k
0inputs+0outputs (544major+3177716minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20160803.9QUgdg/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-10-09 8:07 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-10-09 8:07 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20161009/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161009///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161009//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161009//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161009/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0_rc2:0= required by (app-shells/bash-4.4:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4 ~s390
# required by app-shells/bash-4.4::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161009/.catalyst_lock'
Command exited with non-zero status 1
104.45user 25.21system 2:23.60elapsed 90%CPU (0avgtext+0avgdata 225360maxresident)k
0inputs+0outputs (410major+2421285minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161009.fK1wXH/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-10-10 7:25 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-10-10 7:25 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20161010/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161010///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161010//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161010//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161010/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0_rc2:0= required by (app-shells/bash-4.4:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4 ~s390
# required by app-shells/bash-4.4::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161010/.catalyst_lock'
Command exited with non-zero status 1
102.26user 24.74system 2:16.22elapsed 93%CPU (0avgtext+0avgdata 226432maxresident)k
0inputs+0outputs (407major+2422913minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161010.vdGLO7/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-10-11 7:36 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-10-11 7:36 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20161011/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161011///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161011//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161011//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161011/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0_rc2:0= required by (app-shells/bash-4.4:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4 ~s390
# required by app-shells/bash-4.4::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161011/.catalyst_lock'
Command exited with non-zero status 1
113.82user 29.69system 3:50.44elapsed 62%CPU (0avgtext+0avgdata 225376maxresident)k
0inputs+0outputs (420major+2425607minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161011.ErJQJq/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-10-12 7:33 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-10-12 7:33 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20161012/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161012///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161012//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161012//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161012/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0_rc2:0= required by (app-shells/bash-4.4:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4 ~s390
# required by app-shells/bash-4.4::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161012/.catalyst_lock'
Command exited with non-zero status 1
109.51user 28.74system 2:46.88elapsed 82%CPU (0avgtext+0avgdata 226048maxresident)k
0inputs+0outputs (403major+2418465minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161012.MLLlAU/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-10-13 7:31 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-10-13 7:31 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20161013/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161013///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161013//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161013//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161013/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0_rc2:0= required by (app-shells/bash-4.4:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4 ~s390
# required by app-shells/bash-4.4::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161013/.catalyst_lock'
Command exited with non-zero status 1
108.37user 27.94system 2:38.10elapsed 86%CPU (0avgtext+0avgdata 225760maxresident)k
0inputs+0outputs (421major+2419683minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161013.XGSjzo/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-10-14 8:26 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-10-14 8:26 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20161014/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161014///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161014//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161014//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161014/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4-r1:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4-r1 ~s390
# required by app-shells/bash-4.4-r1::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161014/.catalyst_lock'
Command exited with non-zero status 1
112.86user 29.94system 4:21.87elapsed 54%CPU (0avgtext+0avgdata 226016maxresident)k
0inputs+0outputs (414major+2419381minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161014.E96czi/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-10-15 7:36 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-10-15 7:36 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20161015/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161015///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161015//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161015//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161015/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4-r1:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4-r1 ~s390
# required by app-shells/bash-4.4-r1::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161015/.catalyst_lock'
Command exited with non-zero status 1
104.11user 25.46system 2:10.56elapsed 99%CPU (0avgtext+0avgdata 226064maxresident)k
0inputs+0outputs (418major+2419497minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161015.saqIYo/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-10-16 7:51 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-10-16 7:51 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20161016/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161016///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161016//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161016//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161016/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4-r1:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4-r1 ~s390
# required by app-shells/bash-4.4-r1::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161016/.catalyst_lock'
Command exited with non-zero status 1
114.84user 30.52system 7:24.75elapsed 32%CPU (0avgtext+0avgdata 226272maxresident)k
0inputs+0outputs (411major+2425449minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161016.qfyX03/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-10-17 7:31 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-10-17 7:31 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20161017/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161017///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161017//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161017//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161017/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4-r1:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4-r1 ~s390
# required by app-shells/bash-4.4-r1::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161017/.catalyst_lock'
Command exited with non-zero status 1
105.18user 26.22system 2:15.31elapsed 97%CPU (0avgtext+0avgdata 226784maxresident)k
0inputs+0outputs (413major+2420052minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161017.FImOXF/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-10-18 7:47 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-10-18 7:47 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20161018/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161018///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161018//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161018//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161018/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4-r1:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4-r1 ~s390
# required by app-shells/bash-4.4-r1::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161018/.catalyst_lock'
Command exited with non-zero status 1
109.44user 27.83system 3:33.04elapsed 64%CPU (0avgtext+0avgdata 226512maxresident)k
0inputs+0outputs (406major+2431096minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161018.ODvWA0/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-10-19 7:50 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-10-19 7:50 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20161019/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161019///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161019//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161019//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161019/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4-r1:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4-r1 ~s390
# required by app-shells/bash-4.4-r1::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161019/.catalyst_lock'
Command exited with non-zero status 1
118.36user 31.45system 4:47.23elapsed 52%CPU (0avgtext+0avgdata 228656maxresident)k
0inputs+0outputs (417major+2432480minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161019.QCx0Wk/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-10-20 7:50 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-10-20 7:50 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20161020/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161020///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161020//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161020//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161020/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4-r1:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4-r1 ~s390
# required by app-shells/bash-4.4-r1::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161020/.catalyst_lock'
Command exited with non-zero status 1
119.53user 32.27system 5:05.60elapsed 49%CPU (0avgtext+0avgdata 228272maxresident)k
0inputs+0outputs (413major+2432850minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161020.yqaRPJ/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-10-21 7:26 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-10-21 7:26 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20161021/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161021///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161021//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161021//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161021/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4-r1:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4-r1 ~s390
# required by app-shells/bash-4.4-r1::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161021/.catalyst_lock'
Command exited with non-zero status 1
114.94user 29.96system 3:52.82elapsed 62%CPU (0avgtext+0avgdata 227792maxresident)k
0inputs+0outputs (411major+2434726minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161021.j4LW5t/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-10-22 7:21 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-10-22 7:21 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20161022/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161022///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161022//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161022//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161022/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4-r1:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4-r1 ~s390
# required by app-shells/bash-4.4-r1::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161022/.catalyst_lock'
Command exited with non-zero status 1
104.70user 26.49system 2:10.02elapsed 100%CPU (0avgtext+0avgdata 227904maxresident)k
0inputs+0outputs (412major+2423980minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161022.zDTJga/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-10-25 8:51 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-10-25 8:51 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20161025/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161025///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161025//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161025//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161025/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4-r1:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4-r1 ~s390
# required by app-shells/bash-4.4-r1::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161025/.catalyst_lock'
Command exited with non-zero status 1
106.29user 26.94system 6:59.46elapsed 31%CPU (0avgtext+0avgdata 228880maxresident)k
0inputs+0outputs (421major+2432082minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161025.2PwpdZ/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-10-26 7:52 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-10-26 7:52 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20161026/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161026///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161026//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161026//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161026/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4-r1:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4-r1 ~s390
# required by app-shells/bash-4.4-r1::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161026/.catalyst_lock'
Command exited with non-zero status 1
101.82user 23.85system 3:38.67elapsed 57%CPU (0avgtext+0avgdata 228480maxresident)k
0inputs+0outputs (405major+2428835minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161026.oY3Z7B/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-10-27 7:31 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-10-27 7:31 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20161027/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161027///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161027//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161027//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161027/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4-r1:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4-r1 ~s390
# required by app-shells/bash-4.4-r1::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161027/.catalyst_lock'
Command exited with non-zero status 1
102.36user 22.25system 2:21.54elapsed 88%CPU (0avgtext+0avgdata 227968maxresident)k
0inputs+0outputs (414major+2425493minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161027.SDboXR/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-10-28 8:20 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-10-28 8:20 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161028///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161028//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161028//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161028/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.2.26::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.2.26::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4-r1:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4-r1 ~s390
# required by app-shells/bash-4.4-r1::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161028/.catalyst_lock'
Command exited with non-zero status 1
130.03user 34.61system 3:05.89elapsed 88%CPU (0avgtext+0avgdata 226208maxresident)k
0inputs+0outputs (448major+4452696minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161028.Z5YAIp/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-10-29 7:51 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-10-29 7:51 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161029///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161029//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161029//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161029/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.2.26::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.2.26::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4-r1:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4-r1 ~s390
# required by app-shells/bash-4.4-r1::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161029/.catalyst_lock'
Command exited with non-zero status 1
133.52user 37.96system 4:30.80elapsed 63%CPU (0avgtext+0avgdata 226624maxresident)k
0inputs+0outputs (451major+4462934minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161029.xonHDl/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-10-30 9:20 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-10-30 9:20 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161030///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161030//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161030//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161030/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.2.26::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.2.26::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4-r1:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4-r1 ~s390
# required by app-shells/bash-4.4-r1::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161030/.catalyst_lock'
Command exited with non-zero status 1
143.64user 44.10system 17:22.04elapsed 18%CPU (0avgtext+0avgdata 226336maxresident)k
0inputs+0outputs (456major+4466684minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161030.5cBAQ1/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-10-31 7:35 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-10-31 7:35 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161031///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161031//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161031//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161031/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.2.26::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.2.26::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4-r1:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4-r1 ~s390
# required by app-shells/bash-4.4-r1::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161031/.catalyst_lock'
Command exited with non-zero status 1
130.10user 34.77system 3:07.89elapsed 87%CPU (0avgtext+0avgdata 227072maxresident)k
0inputs+0outputs (438major+4456035minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161031.dVse61/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-11-01 7:35 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-11-01 7:35 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161101///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161101//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161101//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161101/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.2.26::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.2.26::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4-r1:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4-r1 ~s390
# required by app-shells/bash-4.4-r1::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161101/.catalyst_lock'
Command exited with non-zero status 1
130.40user 35.04system 3:06.49elapsed 88%CPU (0avgtext+0avgdata 226656maxresident)k
0inputs+0outputs (463major+4455374minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161101.yY8vFk/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-11-02 7:41 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-11-02 7:41 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161102///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161102//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161102//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161102/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.2.26::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.2.26::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4-r1:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4-r1 ~s390
# required by app-shells/bash-4.4-r1::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161102/.catalyst_lock'
Command exited with non-zero status 1
145.41user 43.17system 18:26.41elapsed 17%CPU (0avgtext+0avgdata 227360maxresident)k
0inputs+0outputs (443major+4464980minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161102.v4Etmo/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-11-03 7:37 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-11-03 7:37 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161103///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161103//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161103//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161103/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.2.26::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.2.26::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4-r1:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4-r1 ~s390
# required by app-shells/bash-4.4-r1::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161103/.catalyst_lock'
Command exited with non-zero status 1
131.24user 35.23system 3:34.08elapsed 77%CPU (0avgtext+0avgdata 227520maxresident)k
0inputs+0outputs (462major+4454699minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161103.EGfkrq/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-11-04 10:51 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-11-04 10:51 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161104///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161104//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161104//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161104/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.2.26::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.2.26::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4-r1:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4-r1 ~s390
# required by app-shells/bash-4.4-r1::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161104/.catalyst_lock'
Command exited with non-zero status 1
148.31user 45.60system 49:31.72elapsed 6%CPU (0avgtext+0avgdata 227264maxresident)k
0inputs+0outputs (434major+4460156minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161104.ur0Bo6/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-11-05 8:34 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-11-05 8:34 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161105///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161105//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161105//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161105/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.2.26::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.2.26::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4-r1:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4-r1 ~s390
# required by app-shells/bash-4.4-r1::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161105/.catalyst_lock'
Command exited with non-zero status 1
134.23user 37.95system 4:27.04elapsed 64%CPU (0avgtext+0avgdata 227760maxresident)k
0inputs+0outputs (452major+4456598minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161105.y8AfSq/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-11-06 7:36 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-11-06 7:36 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161106///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161106//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161106//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161106/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.2.26::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.2.26::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4-r1:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4-r1 ~s390
# required by app-shells/bash-4.4-r1::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161106/.catalyst_lock'
Command exited with non-zero status 1
131.79user 35.48system 3:37.79elapsed 76%CPU (0avgtext+0avgdata 227328maxresident)k
0inputs+0outputs (450major+4453152minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161106.JQ690O/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-11-06 9:29 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-11-06 9:29 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161106///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161106//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161106//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161106/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.2.26::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.2.26::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4-r1:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4-r1 ~s390
# required by app-shells/bash-4.4-r1::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161106/.catalyst_lock'
Command exited with non-zero status 1
139.44user 41.04system 8:08.09elapsed 36%CPU (0avgtext+0avgdata 227824maxresident)k
0inputs+0outputs (469major+4454386minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161106.gXbHw4/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-11-07 11:39 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-11-07 11:39 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161107///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161107//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161107//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161107/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.2.26::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.2.26::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4-r1:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4-r1 ~s390
# required by app-shells/bash-4.4-r1::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161107/.catalyst_lock'
Command exited with non-zero status 1
150.11user 45.77system 29:16.88elapsed 11%CPU (0avgtext+0avgdata 227920maxresident)k
0inputs+0outputs (442major+4465894minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161107.X9d1zO/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-11-08 9:13 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-11-08 9:13 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161108///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161108//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161108//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161108/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.2.26::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.2.26::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4-r1:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4-r1 ~s390
# required by app-shells/bash-4.4-r1::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161108/.catalyst_lock'
Command exited with non-zero status 1
131.88user 35.61system 3:42.59elapsed 75%CPU (0avgtext+0avgdata 227088maxresident)k
0inputs+0outputs (449major+4449589minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161108.Mwqmre/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-11-09 9:25 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-11-09 9:25 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161109///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161109//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161109//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161109/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.2.26::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.2.26::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016e to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4-r1:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.38:3/3::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4-r1 ~s390
# required by app-shells/bash-4.4-r1::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161109/.catalyst_lock'
Command exited with non-zero status 1
142.35user 43.40system 5:01.57elapsed 61%CPU (0avgtext+0avgdata 227456maxresident)k
0inputs+0outputs (450major+4447677minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161109.MmQ99M/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-11-10 8:57 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-11-10 8:57 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161110///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161110//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161110//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161110/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.2.26::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.2.26::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-libs/timezone-data-2016h::gentoo
>>> Installing (1 of 1) sys-libs/timezone-data-2016h::gentoo
* Messages for package sys-libs/timezone-data-2016h:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r5 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20151214 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016h to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.0.0a to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r99 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20141019041918-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-7.0-r1 [6.3_p8-r2]
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0-r1 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.26 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0-r1:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4-r1:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r2:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libxml2-2.9.2-r4:2/2::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-shells/bash:0 (argument)
=app-shells/bash-4.4-r1 ~s390
# required by app-shells/bash-4.4-r1::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=sys-libs/readline-7.0-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161110/.catalyst_lock'
Command exited with non-zero status 1
160.80user 51.15system 5:59.33elapsed 58%CPU (0avgtext+0avgdata 228080maxresident)k
0inputs+0outputs (577major+5216963minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161110.FSOamB/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-11-17 8:44 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-11-17 8:44 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20161117/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20161117/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20161117/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20161117/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20161117/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20161117/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20161117/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20161117/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20161117/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20161117/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20161117/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20161117/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20161117/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161117///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161117//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161117//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161117/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
The following packages are causing rebuilds:
(sys-libs/ncurses-6.0-r1:0/6::gentoo, ebuild scheduled for merge) causes rebuilds for:
(sys-apps/less-481:0/0::gentoo, ebuild scheduled for merge)
(sys-apps/util-linux-2.26.2:0/0::gentoo, ebuild scheduled for merge)
(app-editors/nano-2.5.3:0/0::gentoo, ebuild scheduled for merge)
(sys-devel/gettext-0.19.7:0/0::gentoo, ebuild scheduled for merge)
(sys-apps/openrc-0.19.1:0/0::gentoo, ebuild scheduled for merge)
>>> Verifying ebuild manifests
>>> Emerging (1 of 9) sys-libs/ncurses-6.0-r1::gentoo
>>> Installing (1 of 9) sys-libs/ncurses-6.0-r1::gentoo
>>> Emerging (2 of 9) sys-process/runit-2.1.1-r1::gentoo
>>> Failed to emerge sys-process/runit-2.1.1-r1
* Messages for package sys-libs/ncurses-6.0-r1:
* The ebuild phase 'other' has exited unexpectedly. This type of behavior
* is known to be triggered by things such as failed variable assignments
* (bug #190128) or bad substitution errors (bug #200313). Normally, before
* exiting, bash should have displayed an error message above. If bash did
* not produce an error message above, it's possible that the ebuild has
* called `exit` when it should have called `die` instead. This behavior
* may also be triggered by a corrupt bash binary or a hardware problem
* such as memory or cpu malfunction. If the problem is not reproducible or
* it appears to occur randomly, then it is likely to be triggered by a
* hardware problem. If you suspect a hardware problem then you should try
* some basic hardware diagnostics such as memtest. Please do not report
* this as a bug unless it is consistently reproducible and you are sure
* that your bash binary and hardware are functioning properly.
* Messages for package sys-process/runit-2.1.1-r1:
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161117/.catalyst_lock'
Command exited with non-zero status 1
387.35user 151.84system 8:20.46elapsed 107%CPU (0avgtext+0avgdata 193552maxresident)k
0inputs+0outputs (669major+31755264minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161117.9TEXFc/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-11-23 8:21 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-11-23 8:21 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20161123/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20161123/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20161123/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20161123/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20161123/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20161123/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20161123/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20161123/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20161123/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20161123/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20161123/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20161123/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20161123/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161123///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161123//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161123//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161123/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
The following packages are causing rebuilds:
(sys-libs/ncurses-6.0-r1:0/6::gentoo, ebuild scheduled for merge) causes rebuilds for:
(sys-apps/less-481:0/0::gentoo, ebuild scheduled for merge)
(sys-apps/util-linux-2.26.2:0/0::gentoo, ebuild scheduled for merge)
(app-editors/nano-2.5.3:0/0::gentoo, ebuild scheduled for merge)
(sys-devel/gettext-0.19.7:0/0::gentoo, ebuild scheduled for merge)
(sys-apps/openrc-0.19.1:0/0::gentoo, ebuild scheduled for merge)
>>> Verifying ebuild manifests
>>> Emerging (1 of 9) sys-libs/ncurses-6.0-r1::gentoo
>>> Installing (1 of 9) sys-libs/ncurses-6.0-r1::gentoo
>>> Emerging (2 of 9) sys-process/runit-2.1.1-r1::gentoo
>>> Failed to emerge sys-process/runit-2.1.1-r1
* Messages for package sys-libs/ncurses-6.0-r1:
* The ebuild phase 'other' has exited unexpectedly. This type of behavior
* is known to be triggered by things such as failed variable assignments
* (bug #190128) or bad substitution errors (bug #200313). Normally, before
* exiting, bash should have displayed an error message above. If bash did
* not produce an error message above, it's possible that the ebuild has
* called `exit` when it should have called `die` instead. This behavior
* may also be triggered by a corrupt bash binary or a hardware problem
* such as memory or cpu malfunction. If the problem is not reproducible or
* it appears to occur randomly, then it is likely to be triggered by a
* hardware problem. If you suspect a hardware problem then you should try
* some basic hardware diagnostics such as memtest. Please do not report
* this as a bug unless it is consistently reproducible and you are sure
* that your bash binary and hardware are functioning properly.
* Messages for package sys-process/runit-2.1.1-r1:
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161123/.catalyst_lock'
Command exited with non-zero status 1
369.46user 126.05system 5:35.48elapsed 147%CPU (0avgtext+0avgdata 192288maxresident)k
0inputs+0outputs (690major+31741708minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161123.0QSemO/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-11-23 17:32 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-11-23 17:32 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20161123/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20161123/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20161123/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20161123/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20161123/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20161123/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20161123/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20161123/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20161123/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20161123/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20161123/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20161123/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20161123/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161123///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161123//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161123//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161123/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
The following packages are causing rebuilds:
(sys-libs/ncurses-6.0-r1:0/6::gentoo, ebuild scheduled for merge) causes rebuilds for:
(sys-apps/less-481:0/0::gentoo, ebuild scheduled for merge)
(sys-apps/util-linux-2.26.2:0/0::gentoo, ebuild scheduled for merge)
(app-editors/nano-2.5.3:0/0::gentoo, ebuild scheduled for merge)
(sys-devel/gettext-0.19.7:0/0::gentoo, ebuild scheduled for merge)
(sys-apps/openrc-0.19.1:0/0::gentoo, ebuild scheduled for merge)
>>> Verifying ebuild manifests
>>> Emerging (1 of 9) sys-libs/ncurses-6.0-r1::gentoo
>>> Installing (1 of 9) sys-libs/ncurses-6.0-r1::gentoo
>>> Emerging (2 of 9) sys-process/runit-2.1.1-r1::gentoo
>>> Failed to emerge sys-process/runit-2.1.1-r1
* Messages for package sys-libs/ncurses-6.0-r1:
* The ebuild phase 'other' has exited unexpectedly. This type of behavior
* is known to be triggered by things such as failed variable assignments
* (bug #190128) or bad substitution errors (bug #200313). Normally, before
* exiting, bash should have displayed an error message above. If bash did
* not produce an error message above, it's possible that the ebuild has
* called `exit` when it should have called `die` instead. This behavior
* may also be triggered by a corrupt bash binary or a hardware problem
* such as memory or cpu malfunction. If the problem is not reproducible or
* it appears to occur randomly, then it is likely to be triggered by a
* hardware problem. If you suspect a hardware problem then you should try
* some basic hardware diagnostics such as memtest. Please do not report
* this as a bug unless it is consistently reproducible and you are sure
* that your bash binary and hardware are functioning properly.
* Messages for package sys-process/runit-2.1.1-r1:
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161123/.catalyst_lock'
Command exited with non-zero status 1
377.74user 138.13system 5:52.94elapsed 146%CPU (0avgtext+0avgdata 192352maxresident)k
0inputs+0outputs (647major+31781445minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161123.2s1J7s/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-11-24 8:27 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-11-24 8:27 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20161124/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20161124/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20161124/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20161124/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20161124/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20161124/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20161124/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20161124/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20161124/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20161124/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20161124/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20161124/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20161124/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161124///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161124//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161124//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161124/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
The following packages are causing rebuilds:
(sys-libs/ncurses-6.0-r1:0/6::gentoo, ebuild scheduled for merge) causes rebuilds for:
(sys-apps/less-481:0/0::gentoo, ebuild scheduled for merge)
(sys-apps/util-linux-2.26.2:0/0::gentoo, ebuild scheduled for merge)
(app-editors/nano-2.5.3:0/0::gentoo, ebuild scheduled for merge)
(sys-devel/gettext-0.19.7:0/0::gentoo, ebuild scheduled for merge)
(sys-apps/openrc-0.19.1:0/0::gentoo, ebuild scheduled for merge)
>>> Verifying ebuild manifests
>>> Emerging (1 of 9) sys-libs/ncurses-6.0-r1::gentoo
>>> Installing (1 of 9) sys-libs/ncurses-6.0-r1::gentoo
>>> Emerging (2 of 9) sys-process/runit-2.1.1-r1::gentoo
>>> Failed to emerge sys-process/runit-2.1.1-r1
* Messages for package sys-libs/ncurses-6.0-r1:
* The ebuild phase 'other' has exited unexpectedly. This type of behavior
* is known to be triggered by things such as failed variable assignments
* (bug #190128) or bad substitution errors (bug #200313). Normally, before
* exiting, bash should have displayed an error message above. If bash did
* not produce an error message above, it's possible that the ebuild has
* called `exit` when it should have called `die` instead. This behavior
* may also be triggered by a corrupt bash binary or a hardware problem
* such as memory or cpu malfunction. If the problem is not reproducible or
* it appears to occur randomly, then it is likely to be triggered by a
* hardware problem. If you suspect a hardware problem then you should try
* some basic hardware diagnostics such as memtest. Please do not report
* this as a bug unless it is consistently reproducible and you are sure
* that your bash binary and hardware are functioning properly.
* Messages for package sys-process/runit-2.1.1-r1:
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161124/.catalyst_lock'
Command exited with non-zero status 1
377.47user 139.50system 6:00.93elapsed 143%CPU (0avgtext+0avgdata 192608maxresident)k
0inputs+0outputs (663major+31736418minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161124.yPO6Zj/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-12-07 8:19 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-12-07 8:19 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20161207/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20161207/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20161207/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20161207/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20161207/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20161207/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20161207/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20161207///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161207//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20161207//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20161207/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20160402 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016h to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-481 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.3 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.3-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.10-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.0 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by @system
# required by @world (argument)
=sys-devel/patch-2.7.5 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161207/.catalyst_lock'
Command exited with non-zero status 1
83.21user 18.57system 1:36.36elapsed 105%CPU (0avgtext+0avgdata 210464maxresident)k
0inputs+0outputs (402major+2410771minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161207.2DLu4j/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2016-12-08 8:43 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2016-12-08 8:43 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep app-shells/bash:0 virtual/shadow virtual/pkgconfig sys-devel/binutils sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-devel/gcc-4.9.4
>>> Emerging (1 of 79) sys-libs/zlib-1.2.8-r1::gentoo for /tmp/stage1root/
>>> Installing (1 of 79) sys-libs/zlib-1.2.8-r1::gentoo to /tmp/stage1root/
>>> Emerging (2 of 79) sys-libs/ncurses-6.0-r1::gentoo for /tmp/stage1root/
>>> Installing (2 of 79) sys-libs/ncurses-6.0-r1::gentoo to /tmp/stage1root/
>>> Emerging (3 of 79) app-arch/bzip2-1.0.6-r6::gentoo for /tmp/stage1root/
>>> Installing (3 of 79) app-arch/bzip2-1.0.6-r6::gentoo to /tmp/stage1root/
>>> Emerging (4 of 79) virtual/libiconv-0-r2::gentoo for /tmp/stage1root/
>>> Installing (4 of 79) virtual/libiconv-0-r2::gentoo to /tmp/stage1root/
>>> Emerging (5 of 79) virtual/libintl-0-r2::gentoo for /tmp/stage1root/
>>> Installing (5 of 79) virtual/libintl-0-r2::gentoo to /tmp/stage1root/
>>> Emerging (6 of 79) sys-devel/gnuconfig-20160402::gentoo for /tmp/stage1root/
>>> Installing (6 of 79) sys-devel/gnuconfig-20160402::gentoo to /tmp/stage1root/
>>> Emerging (7 of 79) sys-apps/gentoo-functions-0.10::gentoo for /tmp/stage1root/
>>> Installing (7 of 79) sys-apps/gentoo-functions-0.10::gentoo to /tmp/stage1root/
>>> Emerging (8 of 79) app-arch/xz-utils-5.2.2::gentoo for /tmp/stage1root/
>>> Installing (8 of 79) app-arch/xz-utils-5.2.2::gentoo to /tmp/stage1root/
>>> Emerging (9 of 79) sys-apps/sed-4.2.2::gentoo for /tmp/stage1root/
>>> Installing (9 of 79) sys-apps/sed-4.2.2::gentoo to /tmp/stage1root/
>>> Emerging (10 of 79) sys-apps/file-5.22::gentoo for /tmp/stage1root/
>>> Installing (10 of 79) sys-apps/file-5.22::gentoo to /tmp/stage1root/
>>> Emerging (11 of 79) app-arch/tar-1.29-r1::gentoo for /tmp/stage1root/
>>> Installing (11 of 79) app-arch/tar-1.29-r1::gentoo to /tmp/stage1root/
>>> Emerging (12 of 79) sys-devel/gcc-config-1.7.3::gentoo for /tmp/stage1root/
>>> Installing (12 of 79) sys-devel/gcc-config-1.7.3::gentoo to /tmp/stage1root/
>>> Emerging (13 of 79) sys-libs/timezone-data-2016h::gentoo for /tmp/stage1root/
>>> Installing (13 of 79) sys-libs/timezone-data-2016h::gentoo to /tmp/stage1root/
>>> Emerging (14 of 79) app-misc/editor-wrapper-4::gentoo for /tmp/stage1root/
>>> Installing (14 of 79) app-misc/editor-wrapper-4::gentoo to /tmp/stage1root/
>>> Emerging (15 of 79) dev-libs/popt-1.16-r2::gentoo for /tmp/stage1root/
>>> Installing (15 of 79) dev-libs/popt-1.16-r2::gentoo to /tmp/stage1root/
>>> Emerging (16 of 79) sys-apps/shadow-4.1.5.1-r1::gentoo for /tmp/stage1root/
>>> Installing (16 of 79) sys-apps/shadow-4.1.5.1-r1::gentoo to /tmp/stage1root/
>>> Emerging (17 of 79) dev-lang/python-exec-2.0.1-r1::gentoo for /tmp/stage1root/
>>> Installing (17 of 79) dev-lang/python-exec-2.0.1-r1::gentoo to /tmp/stage1root/
>>> Emerging (18 of 79) dev-libs/libffi-3.0.13-r1::gentoo for /tmp/stage1root/
>>> Installing (18 of 79) dev-libs/libffi-3.0.13-r1::gentoo to /tmp/stage1root/
>>> Emerging (19 of 79) sys-apps/gawk-4.1.3::gentoo for /tmp/stage1root/
>>> Installing (19 of 79) sys-apps/gawk-4.1.3::gentoo to /tmp/stage1root/
>>> Emerging (20 of 79) sys-devel/patch-2.7.5::gentoo for /tmp/stage1root/
>>> Installing (20 of 79) sys-devel/patch-2.7.5::gentoo to /tmp/stage1root/
>>> Emerging (21 of 79) sys-devel/make-4.1-r1::gentoo for /tmp/stage1root/
>>> Installing (21 of 79) sys-devel/make-4.1-r1::gentoo to /tmp/stage1root/
>>> Emerging (22 of 79) sys-apps/findutils-4.6.0-r1::gentoo for /tmp/stage1root/
>>> Installing (22 of 79) sys-apps/findutils-4.6.0-r1::gentoo to /tmp/stage1root/
>>> Emerging (23 of 79) app-arch/gzip-1.8::gentoo for /tmp/stage1root/
>>> Installing (23 of 79) app-arch/gzip-1.8::gentoo to /tmp/stage1root/
>>> Emerging (24 of 79) sys-apps/which-2.20-r1::gentoo for /tmp/stage1root/
>>> Installing (24 of 79) sys-apps/which-2.20-r1::gentoo to /tmp/stage1root/
>>> Emerging (25 of 79) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (25 of 79) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
>>> Emerging (26 of 79) sys-devel/autoconf-wrapper-13::gentoo for /tmp/stage1root/
>>> Installing (26 of 79) sys-devel/autoconf-wrapper-13::gentoo to /tmp/stage1root/
>>> Emerging (27 of 79) dev-libs/expat-2.1.1-r2::gentoo for /tmp/stage1root/
>>> Installing (27 of 79) dev-libs/expat-2.1.1-r2::gentoo to /tmp/stage1root/
>>> Emerging (28 of 79) sys-devel/automake-wrapper-10::gentoo for /tmp/stage1root/
>>> Installing (28 of 79) sys-devel/automake-wrapper-10::gentoo to /tmp/stage1root/
>>> Emerging (29 of 79) dev-util/pkgconfig-0.28-r2::gentoo for /tmp/stage1root/
>>> Installing (29 of 79) dev-util/pkgconfig-0.28-r2::gentoo to /tmp/stage1root/
>>> Emerging (30 of 79) sys-apps/makedev-3.23.1::gentoo for /tmp/stage1root/
>>> Installing (30 of 79) sys-apps/makedev-3.23.1::gentoo to /tmp/stage1root/
>>> Emerging (31 of 79) dev-libs/gmp-6.1.0::gentoo for /tmp/stage1root/
>>> Failed to emerge dev-libs/gmp-6.1.0 for /tmp/stage1root/, Log file:
>>> '/var/tmp/portage/dev-libs/gmp-6.1.0/temp/build.log'
* Package: dev-libs/gmp-6.1.0
* Repository: gentoo
* Maintainer: toolchain@gentoo.org
* USE: abi_s390_32 cxx elibc_glibc kernel_linux s390 userland_GNU
* FEATURES: preserve-libs sandbox userpriv usersandbox
* Applying gmp-6.1.0-udiv.patch ...
[ ok ]
* Applying gmp-6.1.0-tune-printf.patch ...
[ ok ]
* Running elibtoolize in: gmp-6.1.0/
* Applying portage/1.2.0 patch ...
* Applying sed/1.5.6 patch ...
* Applying as-needed/2.4.3 patch ...
* Applying gmp-6.1.0-noexecstack-detect.patch ...
[ ok ]
* abi_s390_32.s390: running multilib-minimal_abi_src_configure
env: /var/tmp/portage/dev-libs/gmp-6.1.0/work/gmp-6.1.0/configure.wrapped: Permission denied
* ERROR: dev-libs/gmp-6.1.0::gentoo failed (configure phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 115: Called src_configure
* environment, line 3211: Called multilib-minimal_src_configure
* environment, line 2390: Called multilib_foreach_abi 'multilib-minimal_abi_src_configure'
* environment, line 2604: Called multibuild_foreach_variant '_multilib_multibuild_wrapper' 'multilib-minimal_abi_src_configure'
* environment, line 2320: Called _multibuild_run '_multilib_multibuild_wrapper' 'multilib-minimal_abi_src_configure'
* environment, line 2318: Called _multilib_multibuild_wrapper 'multilib-minimal_abi_src_configure'
* environment, line 500: Called multilib-minimal_abi_src_configure
* environment, line 2384: Called multilib_src_configure
* environment, line 2846: Called econf '--localstatedir=/var/state/gmp' '--enable-shared' '--disable-assembly' '--enable-cxx' '--disable-static'
* phase-helpers.sh, line 662: Called __helpers_die 'econf failed'
* isolated-functions.sh, line 117: Called die
* The specific snippet of code:
* die "$@"
*
* If you need support, post the output of `emerge --info '=dev-libs/gmp-6.1.0::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-libs/gmp-6.1.0::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-libs/gmp-6.1.0/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-libs/gmp-6.1.0/temp/environment'.
* Working directory: '/var/tmp/portage/dev-libs/gmp-6.1.0/work/gmp-6.1.0-abi_s390_32.s390'
* S: '/var/tmp/portage/dev-libs/gmp-6.1.0/work/gmp-6.1.0'
* Messages for package sys-libs/timezone-data-2016h merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package sys-apps/shadow-4.1.5.1-r1 merged to /tmp/stage1root/:
* Running 'grpck' returned errors. Please run it by hand, and then
* run 'grpconv' afterwards!
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* You should reboot the system now to get /run mounted with tmpfs!
* Messages for package dev-libs/gmp-6.1.0 merged to /tmp/stage1root/:
* ERROR: dev-libs/gmp-6.1.0::gentoo failed (configure phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 115: Called src_configure
* environment, line 3211: Called multilib-minimal_src_configure
* environment, line 2390: Called multilib_foreach_abi 'multilib-minimal_abi_src_configure'
* environment, line 2604: Called multibuild_foreach_variant '_multilib_multibuild_wrapper' 'multilib-minimal_abi_src_configure'
* environment, line 2320: Called _multibuild_run '_multilib_multibuild_wrapper' 'multilib-minimal_abi_src_configure'
* environment, line 2318: Called _multilib_multibuild_wrapper 'multilib-minimal_abi_src_configure'
* environment, line 500: Called multilib-minimal_abi_src_configure
* environment, line 2384: Called multilib_src_configure
* environment, line 2846: Called econf '--localstatedir=/var/state/gmp' '--enable-shared' '--disable-assembly' '--enable-cxx' '--disable-static'
* phase-helpers.sh, line 662: Called __helpers_die 'econf failed'
* isolated-functions.sh, line 117: Called die
* The specific snippet of code:
* die "$@"
*
* If you need support, post the output of `emerge --info '=dev-libs/gmp-6.1.0::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-libs/gmp-6.1.0::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-libs/gmp-6.1.0/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-libs/gmp-6.1.0/temp/environment'.
* Working directory: '/var/tmp/portage/dev-libs/gmp-6.1.0/work/gmp-6.1.0-abi_s390_32.s390'
* S: '/var/tmp/portage/dev-libs/gmp-6.1.0/work/gmp-6.1.0'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20161208/.catalyst_lock'
Command exited with non-zero status 1
1087.93user 589.94system 22:03.94elapsed 126%CPU (0avgtext+0avgdata 211152maxresident)k
0inputs+0outputs (840major+141136103minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20161208.76q10t/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-01-13 8:14 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-01-13 8:14 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170113///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170113//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170113//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170113/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/coreutils app-arch/tar sys-apps/file sys-devel/gcc sys-devel/gettext sys-apps/makedev sys-apps/less sys-devel/binutils app-arch/xz-utils sys-devel/autoconf sys-apps/grep sys-apps/net-tools virtual/pkgconfig app-arch/gzip net-misc/rsync sys-apps/baselayout sys-devel/bison app-arch/bzip2 sys-devel/libtool virtual/editor virtual/package-manager sys-apps/sed virtual/libc net-misc/wget sys-devel/make app-shells/bash:0 sys-devel/automake sys-apps/diffutils sys-devel/gnuconfig virtual/os-headers sys-apps/findutils sys-apps/gawk sys-devel/flex virtual/shadow sys-devel/patch sys-apps/which
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016h to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.3 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.0 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.7::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/expat-2.2.0-r1 ~s390
# required by sys-apps/portage-2.3.0::gentoo[python_targets_python3_4]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/autoconf-2.69::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=dev-lang/python-3.4.5 ~s390
# required by sys-apps/portage-2.3.0::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/autoconf-2.69::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=dev-lang/python-2.7.12 ~s390
# required by sys-apps/portage-2.3.0::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/autoconf-2.69::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=dev-lang/python-exec-2.4.4 ~s390
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.0::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by sys-devel/autoconf-2.69::gentoo
# required by sys-devel/libtool-2.4.6::gentoo
# required by sys-devel/libtool (argument)
=app-eselect/eselect-python-20160516 ~s390
# required by sys-devel/flex (argument)
=sys-devel/flex-2.6.3 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170113/.catalyst_lock'
Command exited with non-zero status 1
33.66user 5.28system 0:50.49elapsed 77%CPU (0avgtext+0avgdata 171040maxresident)k
0inputs+0outputs (412major+1377891minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170113.mV1jMU/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-01-14 8:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-01-14 8:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
/var/tmp/catalyst/snapshot_cache/20170114/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170114/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170114///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170114//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170114//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170114/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-arch/xz-utils sys-devel/gettext sys-apps/grep virtual/libc sys-devel/flex app-arch/gzip sys-devel/autoconf app-shells/bash:0 virtual/package-manager sys-apps/file sys-devel/libtool virtual/shadow virtual/os-headers sys-apps/net-tools sys-apps/makedev sys-apps/which sys-devel/patch net-misc/wget sys-apps/less virtual/editor sys-apps/baselayout app-arch/bzip2 sys-apps/findutils sys-devel/gcc sys-devel/make virtual/pkgconfig sys-apps/coreutils sys-devel/automake sys-devel/binutils sys-apps/diffutils sys-apps/gawk sys-apps/sed sys-devel/bison net-misc/rsync app-arch/tar sys-devel/gnuconfig
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016h to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.3 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.0 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/portage-2.3.0::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by virtual/perl-Data-Dumper-2.154.0-r1::gentoo
=dev-lang/python-exec-2.4.4 ~s390
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.0::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by virtual/perl-Data-Dumper-2.154.0-r1::gentoo
=app-eselect/eselect-python-20160516 ~s390
# required by sys-devel/flex (argument)
=sys-devel/flex-2.6.3 ~s390
# required by sys-apps/portage-2.3.0::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by virtual/perl-Data-Dumper-2.154.0-r1::gentoo
=dev-lang/python-2.7.12 ~s390
# required by sys-devel/gettext-0.19.7::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/expat-2.2.0-r1 ~s390
# required by sys-apps/portage-2.3.0::gentoo[python_targets_python3_4]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by virtual/perl-Data-Dumper-2.154.0-r1::gentoo
=dev-lang/python-3.4.5 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170114/.catalyst_lock'
Command exited with non-zero status 1
33.22user 5.24system 0:47.28elapsed 81%CPU (0avgtext+0avgdata 170160maxresident)k
0inputs+0outputs (412major+1379279minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170114.OXwnHZ/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-01-15 8:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-01-15 8:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
/var/tmp/catalyst/snapshot_cache/20170115/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170115/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170115///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170115//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170115//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170115/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-arch/gzip app-arch/xz-utils sys-apps/makedev sys-apps/diffutils sys-apps/grep sys-apps/which sys-devel/gcc virtual/shadow sys-apps/baselayout virtual/os-headers app-arch/tar sys-apps/findutils sys-apps/gawk sys-apps/file sys-apps/coreutils virtual/package-manager net-misc/rsync app-arch/bzip2 sys-devel/patch virtual/editor sys-apps/sed sys-devel/bison sys-devel/automake sys-apps/net-tools sys-devel/gnuconfig sys-devel/gettext sys-devel/flex virtual/libc sys-devel/binutils sys-devel/libtool app-shells/bash:0 sys-devel/make net-misc/wget sys-apps/less virtual/pkgconfig sys-devel/autoconf
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016h to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.3 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.0 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/flex (argument)
=sys-devel/flex-2.6.3 ~s390
# required by sys-apps/portage-2.3.0::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=dev-lang/python-2.7.12 ~s390
# required by sys-apps/portage-2.3.0::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=dev-lang/python-exec-2.4.4 ~s390
# required by sys-apps/portage-2.3.0::gentoo[python_targets_python3_4]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=dev-lang/python-3.4.5 ~s390
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.0::gentoo[python_targets_python3_4]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.20.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=app-eselect/eselect-python-20160516 ~s390
# required by sys-devel/gettext-0.19.7::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/expat-2.2.0-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170115/.catalyst_lock'
Command exited with non-zero status 1
33.16user 5.45system 0:47.40elapsed 81%CPU (0avgtext+0avgdata 170768maxresident)k
0inputs+0outputs (411major+1380612minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170115.h0l2vU/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-01-16 8:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-01-16 8:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20170116/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170116/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170116///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170116//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170116//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170116/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/gnuconfig sys-apps/findutils virtual/pkgconfig sys-apps/grep net-misc/wget sys-devel/automake virtual/editor app-arch/xz-utils app-arch/bzip2 sys-devel/make virtual/libc sys-devel/autoconf sys-devel/binutils sys-devel/gcc sys-apps/gawk sys-devel/gettext app-arch/gzip sys-devel/flex sys-apps/baselayout sys-apps/makedev sys-apps/which sys-apps/file sys-devel/bison sys-apps/coreutils app-shells/bash:0 virtual/os-headers virtual/shadow sys-apps/sed sys-devel/patch app-arch/tar net-misc/rsync sys-devel/libtool sys-apps/net-tools sys-apps/diffutils virtual/package-manager sys-apps/less
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016h to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.3 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.0 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.0::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=app-eselect/eselect-python-20160516 ~s390
# required by sys-apps/portage-2.3.0::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=dev-lang/python-2.7.12 ~s390
# required by sys-apps/portage-2.3.0::gentoo
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=dev-lang/python-exec-2.4.4 ~s390
# required by sys-devel/gettext-0.19.7::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/expat-2.2.0-r1 ~s390
# required by sys-apps/portage-2.3.0::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=dev-lang/python-3.4.5 ~s390
# required by sys-devel/flex (argument)
=sys-devel/flex-2.6.3 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170116/.catalyst_lock'
Command exited with non-zero status 1
33.21user 5.53system 0:46.79elapsed 82%CPU (0avgtext+0avgdata 170576maxresident)k
0inputs+0outputs (404major+1379674minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170116.gbcMmd/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-01-17 8:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-01-17 8:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170117///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170117//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170117//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170117/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/gawk sys-apps/makedev sys-devel/gnuconfig virtual/package-manager sys-apps/diffutils sys-devel/libtool app-arch/xz-utils sys-apps/coreutils virtual/editor virtual/pkgconfig sys-devel/gettext sys-devel/make sys-apps/file sys-apps/net-tools net-misc/rsync sys-apps/less sys-devel/binutils sys-devel/flex sys-apps/grep app-arch/tar net-misc/wget app-arch/bzip2 sys-apps/sed sys-devel/gcc sys-devel/autoconf app-shells/bash:0 sys-devel/automake sys-devel/patch sys-apps/baselayout sys-devel/bison virtual/shadow virtual/os-headers virtual/libc sys-apps/which sys-apps/findutils app-arch/gzip
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2016h to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.23 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.3 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.7.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.25.1-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.22-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.0 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.5.3 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.18 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.0::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=sys-libs/zlib-1.2.11 ~s390
# required by sys-apps/portage-2.3.0::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=dev-lang/python-3.4.5 ~s390
# required by sys-devel/gettext-0.19.7::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/expat-2.2.0-r1 ~s390
# required by sys-devel/flex (argument)
=sys-devel/flex-2.6.3 ~s390
# required by sys-apps/portage-2.3.0::gentoo
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=dev-lang/python-exec-2.4.4 ~s390
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.0::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=app-eselect/eselect-python-20160516 ~s390
# required by sys-apps/portage-2.3.0::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=dev-lang/python-2.7.12 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170117/.catalyst_lock'
Command exited with non-zero status 1
33.14user 5.85system 0:48.20elapsed 80%CPU (0avgtext+0avgdata 170720maxresident)k
0inputs+0outputs (410major+1379832minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170117.iIwYuJ/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-01-18 8:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-01-18 8:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20170118/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170118/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20170118/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20170118/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20170118/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170118/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170118/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20170118/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170118/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20170118/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20170118/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20170118/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170118/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170118///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170118//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170118//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170118/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
[ebuild U ] sys-libs/zlib-1.2.11 [1.2.8-r1]
[ebuild U ] dev-libs/expat-2.2.0-r1 [2.1.1-r2]
[ebuild rR ] sys-libs/cracklib-2.9.6-r1
[ebuild r U ] sys-apps/file-5.29 [5.22]
[ebuild rR ] sys-devel/gettext-0.19.7
[ebuild U ] sys-devel/flex-2.6.1 [2.5.39-r1]
[ebuild rR ] sys-devel/bison-2.7.1
[ebuild rR ] sys-devel/binutils-2.25.1-r1
[ebuild rR ] sys-devel/gcc-4.9.4
[ebuild rR ] dev-lang/perl-5.20.2
[ebuild rR ] dev-libs/openssl-1.0.2j
[ebuild rR ] dev-perl/XML-Parser-2.410.0-r2
[ebuild rR ] sys-libs/pam-1.2.1
[ebuild U ] dev-lang/python-exec-2.4.4 [2.0.1-r1]
[ebuild U ] app-eselect/eselect-python-20160516 [20111108]
[blocks b ] <app-eselect/eselect-python-20160206 ("<app-eselect/eselect-python-20160206" is blocking dev-lang/python-exec-2.4.4)
[ebuild rR ] sys-apps/util-linux-2.26.2
[ebuild r U ] dev-libs/libpcre-8.40 [8.38-r1]
[ebuild rR ] sys-apps/iproute2-4.4.0
[ebuild rR ] sys-apps/s390-tools-1.23.1
[ebuild r U ] dev-lang/python-3.4.5 [3.4.3-r1]
[blocks b ] <dev-lang/python-3.4.3-r4:3.4 ("<dev-lang/python-3.4.3-r4:3.4" is blocking dev-lang/python-exec-2.4.4)
[ebuild r U ] dev-lang/python-2.7.12 [2.7.10-r1]
[blocks b ] <dev-lang/python-2.7.10-r4:2.7 ("<dev-lang/python-2.7.10-r4:2.7" is blocking dev-lang/python-exec-2.4.4)
[ebuild rR ] sys-apps/kmod-22
[ebuild r U ] net-misc/openssh-7.4_p1 [7.3_p1-r6]
[ebuild rR ] sys-apps/man-db-2.7.5
[ebuild rR ] net-misc/wget-1.18
[ebuild rR ] dev-python/packaging-15.3-r2
[ebuild rR ] dev-python/setuptools-18.4
[ebuild rR ] dev-python/certifi-2015.11.20
[ebuild rR ] dev-python/pyxattr-0.5.3
[ebuild rR ] sys-apps/portage-2.3.0
[ebuild rR ] dev-libs/glib-2.44.1-r1
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by @__auto_rebuild__ (argument)
=net-misc/openssh-7.4_p1 ~s390
# required by @__auto_rebuild__ (argument)
=sys-apps/file-5.29 ~s390
# required by @__auto_rebuild__ (argument)
=dev-libs/libpcre-8.40 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170118/.catalyst_lock'
Command exited with non-zero status 1
31.12user 4.60system 0:43.81elapsed 81%CPU (0avgtext+0avgdata 179600maxresident)k
0inputs+0outputs (342major+1013896minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170118.pxDhXP/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-01-19 8:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-01-19 8:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20170119/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170119/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20170119/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20170119/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20170119/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170119/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170119/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20170119/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170119/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20170119/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20170119/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20170119/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170119/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170119///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170119//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170119//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170119/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
[ebuild U ] sys-libs/zlib-1.2.11 [1.2.8-r1]
[ebuild U ] dev-libs/expat-2.2.0-r1 [2.1.1-r2]
[ebuild rR ] sys-libs/cracklib-2.9.6-r1
[ebuild r U ] sys-apps/file-5.25 [5.22]
[ebuild rR ] sys-devel/gettext-0.19.7
[ebuild U ] sys-devel/flex-2.6.1 [2.5.39-r1]
[ebuild rR ] sys-devel/bison-2.7.1
[ebuild rR ] sys-devel/binutils-2.25.1-r1
[ebuild rR ] sys-devel/gcc-4.9.4
[ebuild rR ] dev-lang/perl-5.20.2
[ebuild rR ] dev-libs/openssl-1.0.2j
[ebuild rR ] dev-perl/XML-Parser-2.410.0-r2
[ebuild rR ] sys-libs/pam-1.2.1
[ebuild U ] dev-lang/python-exec-2.4.4 [2.0.1-r1]
[ebuild U ] app-eselect/eselect-python-20160516 [20111108]
[blocks b ] <app-eselect/eselect-python-20160206 ("<app-eselect/eselect-python-20160206" is blocking dev-lang/python-exec-2.4.4)
[ebuild rR ] sys-apps/util-linux-2.26.2
[ebuild r U ] dev-libs/libpcre-8.39 [8.38-r1]
[ebuild rR ] sys-apps/iproute2-4.4.0
[ebuild rR ] sys-apps/s390-tools-1.23.1
[ebuild r U ] dev-lang/python-3.4.5 [3.4.3-r1]
[blocks b ] <dev-lang/python-3.4.3-r4:3.4 ("<dev-lang/python-3.4.3-r4:3.4" is blocking dev-lang/python-exec-2.4.4)
[ebuild r U ] dev-lang/python-2.7.12 [2.7.10-r1]
[blocks b ] <dev-lang/python-2.7.10-r4:2.7 ("<dev-lang/python-2.7.10-r4:2.7" is blocking dev-lang/python-exec-2.4.4)
[ebuild rR ] sys-apps/kmod-22
[ebuild r U ] net-misc/openssh-7.3_p1-r7 [7.3_p1-r6]
[ebuild r U ] sys-apps/man-db-2.7.6.1-r1 [2.7.5]
[ebuild rR ] net-misc/wget-1.18
[ebuild rR ] dev-python/packaging-15.3-r2
[ebuild rR ] dev-libs/glib-2.44.1-r1
[ebuild rR ] dev-python/setuptools-18.4
[ebuild rR ] dev-python/pyxattr-0.5.3
[ebuild rR ] dev-python/certifi-2015.11.20
[ebuild rR ] sys-apps/portage-2.3.0
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by @__auto_rebuild__ (argument)
=sys-apps/man-db-2.7.6.1-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170119/.catalyst_lock'
Command exited with non-zero status 1
31.40user 4.77system 0:43.82elapsed 82%CPU (0avgtext+0avgdata 179184maxresident)k
0inputs+0outputs (341major+1016077minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170119.X1pKVR/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-01-20 9:08 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-01-20 9:08 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* Removing dead symlink //usr/share/man/man1/zipdetails.1.bz2
* Removing dead symlink //usr/share/man/man1/json_pp.1.bz2
* Removing dead symlink //usr/share/man/man1/corelist.1.bz2
* Removing dead symlink //usr/share/man/man1/pod2usage.1.bz2
* Removing dead symlink //usr/share/man/man1/podchecker.1.bz2
* Removing dead symlink //usr/share/man/man1/podselect.1.bz2
* Removing dead symlink //usr/share/man/man1/perldoc.1.bz2
* Removing dead symlink //usr/share/man/man1/prove.1.bz2
* Removing dead symlink //usr/share/man/man1/pod2man.1.bz2
* Removing dead symlink //usr/share/man/man1/pod2text.1.bz2
* Removing dead symlink //usr/share/man/man1/perlpodstyle.1.bz2
* Messages for package dev-lang/perl-5.20.2:
* Unable to establish //usr/share/man/man1/ptar.1* symlink
* Unable to establish //usr/share/man/man1/ptardiff.1* symlink
* Unable to establish //usr/share/man/man1/ptargrep.1* symlink
* Unable to establish //usr/share/man/man1/shasum.1* symlink
* Unable to establish //usr/share/man/man1/cpan.1* symlink
* Unable to establish //usr/share/man/man1/enc2xs.1* symlink
* Unable to establish //usr/share/man/man1/piconv.1* symlink
* Unable to establish //usr/share/man/man1/instmodsh.1* symlink
* Unable to establish //usr/share/man/man1/xsubpp.1* symlink
* Unable to establish //usr/share/man/man1/zipdetails.1* symlink
* Unable to establish //usr/share/man/man1/json_pp.1* symlink
* Unable to establish //usr/share/man/man1/corelist.1* symlink
* Unable to establish //usr/share/man/man1/pod2usage.1* symlink
* Unable to establish //usr/share/man/man1/podchecker.1* symlink
* Unable to establish //usr/share/man/man1/podselect.1* symlink
* Unable to establish //usr/share/man/man1/perldoc.1* symlink
* Unable to establish //usr/share/man/man1/prove.1* symlink
* Unable to establish //usr/share/man/man1/pod2man.1* symlink
* Unable to establish //usr/share/man/man1/pod2text.1* symlink
* Unable to establish //usr/share/man/man1/perlpodstyle.1* symlink
* Messages for package sys-libs/pam-1.2.1:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package dev-lang/python-exec-2.4.4:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /usr/bin/pydoc
* /usr/bin/2to3
* /usr/bin/python-config
* /usr/bin/python3
* /usr/bin/python2
* /usr/bin/python
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'dev-lang/python-exec-2.4.4' merged despite file collisions.
* If necessary, refer to your elog messages for the whole content of the
* above message.
* You seem to have just upgraded into the new version of python-exec
* that uses python-exec.conf for configuration. The ebuild has attempted
* to convert your previous configuration to the new format, resulting
* in the following preferences (most preferred version first):
*
* python3.4
*
* Those interpreters will be preferred when running Python scripts or
* calling wrapped Python executables (python, python2, pydoc...).
* If none of the preferred interpreters are supported, python-exec will
* fall back to the newest supported Python version.
*
* Please note that due to the ambiguous character of the old settings,
* you may want to modify the preference list yourself. In order to do so,
* open the following file in your favorite editor:
*
* /etc/python-exec/python-exec.conf
*
* For more information on the new configuration format, please read
* the comment on top of the installed configuration file.
* Messages for package sys-apps/util-linux-2.26.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-apps/man-db-2.7.6.1-r1:
* Defaulting to USE=gdbm due to ambiguous berkdb/gdbm USE flag settings
* Messages for package dev-libs/glib-2.44.1-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - INOTIFY_USER
* You're on your own to make sure they are set if needed.
* Messages for package sys-fs/udev-225-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - BLK_DEV_BSG
* - DEVTMPFS
* - IDE
* - INOTIFY_USER
* - SYSFS_DEPRECATED
* - SYSFS_DEPRECATED_V2
* - SIGNALFD
* - EPOLL
* - FHANDLE
* - NET
* - FW_LOADER_USER_HELPER
* - UNIX
* You're on your own to make sure they are set if needed.
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* https://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
[ebuild N ] sys-apps/baselayout-2.3 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/baselayout (argument)
=sys-apps/baselayout-2.3 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170120/.catalyst_lock'
Command exited with non-zero status 1
4350.97user 821.34system 54:27.01elapsed 158%CPU (0avgtext+0avgdata 1642896maxresident)k
0inputs+0outputs (2752major+472968817minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170120.pZzDx8/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-03-31 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-03-31 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170331/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170331/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20170331/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170331/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20170331/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20170331/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20170331/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170331/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170331///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170331//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170331//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170331/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.3::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.3::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/automake sys-apps/gawk virtual/os-headers sys-devel/flex sys-apps/makedev sys-devel/bison sys-apps/baselayout virtual/shadow app-shells/bash:0 sys-apps/file sys-apps/findutils sys-devel/gettext app-arch/bzip2 net-misc/wget sys-devel/autoconf sys-devel/gnuconfig sys-devel/binutils app-arch/xz-utils virtual/package-manager sys-apps/grep app-arch/gzip sys-apps/coreutils sys-devel/libtool sys-devel/gcc net-misc/rsync app-arch/tar sys-devel/make virtual/editor sys-devel/patch sys-apps/less virtual/pkgconfig sys-apps/which virtual/libc sys-apps/net-tools sys-apps/diffutils sys-apps/sed
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] app-portage/elt-patches-20170317
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.22.3_rc4 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.350.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.6.3 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.7::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.4-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170331/.catalyst_lock'
Command exited with non-zero status 1
45.21user 9.07system 1:04.63elapsed 83%CPU (0avgtext+0avgdata 173808maxresident)k
0inputs+0outputs (556major+2807891minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170331.SjHOmo/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-04-01 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-04-01 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170401/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170401/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20170401/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170401/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20170401/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20170401/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20170401/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170401/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170401///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170401//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170401//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170401/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.3::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.3::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/autoconf sys-devel/bison sys-apps/gawk sys-devel/binutils sys-apps/diffutils sys-devel/patch virtual/package-manager sys-apps/which sys-apps/makedev virtual/libc sys-apps/baselayout app-arch/gzip app-shells/bash:0 sys-apps/net-tools virtual/pkgconfig sys-devel/gnuconfig sys-devel/gcc sys-apps/less virtual/shadow sys-apps/findutils sys-apps/coreutils app-arch/xz-utils net-misc/wget sys-devel/libtool sys-devel/flex virtual/os-headers net-misc/rsync sys-apps/grep app-arch/bzip2 sys-devel/make sys-apps/sed sys-devel/automake virtual/editor app-arch/tar sys-devel/gettext sys-apps/file
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] app-portage/elt-patches-20170317
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.22.3_rc4 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.350.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.6.3 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.7::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.4-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170401/.catalyst_lock'
Command exited with non-zero status 1
45.28user 9.29system 1:03.45elapsed 86%CPU (0avgtext+0avgdata 173088maxresident)k
0inputs+0outputs (558major+2815503minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170401.sy92SW/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-04-02 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-04-02 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170402/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170402/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20170402/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170402/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20170402/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20170402/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20170402/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170402/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170402///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170402//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170402//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170402/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.3::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.3::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/sed sys-apps/grep sys-devel/patch app-shells/bash:0 virtual/shadow sys-devel/gcc net-misc/rsync virtual/os-headers virtual/pkgconfig virtual/package-manager sys-apps/which app-arch/bzip2 sys-devel/libtool sys-apps/findutils sys-devel/flex sys-devel/gettext sys-apps/makedev net-misc/wget sys-apps/coreutils sys-apps/gawk app-arch/xz-utils sys-apps/file sys-apps/diffutils app-arch/gzip sys-apps/net-tools sys-devel/bison sys-apps/less sys-devel/binutils virtual/editor sys-devel/make sys-devel/automake virtual/libc app-arch/tar sys-devel/autoconf sys-devel/gnuconfig sys-apps/baselayout
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] app-portage/elt-patches-20170317
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.22.3_rc4 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.350.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.6.3 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.7::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.4-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170402/.catalyst_lock'
Command exited with non-zero status 1
45.26user 9.25system 1:04.49elapsed 84%CPU (0avgtext+0avgdata 173088maxresident)k
0inputs+0outputs (561major+2812900minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170402.aXgIG1/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-04-03 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-04-03 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170403/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170403/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20170403/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170403/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20170403/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20170403/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20170403/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170403/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170403///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170403//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170403//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170403/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.3::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.3::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot virtual/editor net-misc/wget app-arch/xz-utils sys-apps/file sys-apps/diffutils virtual/package-manager sys-devel/bison sys-devel/flex app-arch/gzip net-misc/rsync sys-apps/makedev sys-apps/grep virtual/shadow sys-apps/net-tools sys-apps/less sys-devel/autoconf sys-devel/make sys-devel/automake virtual/pkgconfig sys-devel/gcc sys-devel/patch virtual/libc sys-apps/baselayout virtual/os-headers sys-apps/which sys-devel/gettext sys-devel/binutils sys-devel/gnuconfig app-shells/bash:0 sys-devel/libtool sys-apps/sed app-arch/tar sys-apps/findutils sys-apps/coreutils app-arch/bzip2 sys-apps/gawk
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] app-portage/elt-patches-20170317
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.22.3_rc4 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.350.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.6.3 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.7::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.4-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170403/.catalyst_lock'
Command exited with non-zero status 1
45.05user 8.88system 1:03.01elapsed 85%CPU (0avgtext+0avgdata 172960maxresident)k
0inputs+0outputs (551major+2817776minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170403.hLyiOO/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-04-04 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-04-04 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170404/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170404/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20170404/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170404/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20170404/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20170404/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20170404/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170404/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170404///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170404//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170404//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170404/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.3::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.3::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-arch/tar sys-apps/file sys-devel/autoconf virtual/editor app-arch/xz-utils sys-devel/bison sys-apps/baselayout sys-apps/which sys-apps/coreutils app-shells/bash:0 virtual/os-headers sys-apps/grep sys-apps/makedev sys-devel/libtool sys-devel/gettext sys-devel/gcc sys-devel/binutils sys-apps/diffutils sys-apps/sed sys-devel/automake sys-devel/patch app-arch/gzip sys-devel/flex sys-apps/net-tools sys-apps/less net-misc/wget sys-devel/make virtual/libc net-misc/rsync virtual/shadow sys-devel/gnuconfig sys-apps/gawk app-arch/bzip2 virtual/package-manager sys-apps/findutils virtual/pkgconfig
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] app-portage/elt-patches-20170317
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.22.3_rc4 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.350.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.6.3 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.7::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.4-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170404/.catalyst_lock'
Command exited with non-zero status 1
45.47user 9.49system 1:03.40elapsed 86%CPU (0avgtext+0avgdata 172672maxresident)k
0inputs+0outputs (562major+2820575minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170404.VOe0uU/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-04-05 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-04-05 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170405/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170405/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20170405/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170405/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20170405/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20170405/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20170405/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170405/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170405///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170405//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170405//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170405/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.3::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.3::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot virtual/shadow sys-devel/patch app-arch/bzip2 virtual/package-manager app-arch/gzip virtual/os-headers sys-apps/makedev sys-devel/gettext virtual/editor sys-devel/binutils sys-apps/sed app-arch/xz-utils sys-apps/diffutils sys-apps/baselayout sys-apps/grep sys-devel/make net-misc/wget sys-apps/gawk sys-devel/gcc sys-devel/libtool sys-apps/findutils sys-apps/less virtual/libc sys-devel/gnuconfig sys-apps/which sys-devel/automake sys-apps/file sys-devel/flex app-shells/bash:0 sys-apps/coreutils virtual/pkgconfig sys-devel/autoconf net-misc/rsync app-arch/tar sys-apps/net-tools sys-devel/bison
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] app-portage/elt-patches-20170317
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.22.3_rc4 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.350.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.6.3 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.7::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.4-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170405/.catalyst_lock'
Command exited with non-zero status 1
45.52user 9.80system 1:05.43elapsed 84%CPU (0avgtext+0avgdata 172368maxresident)k
0inputs+0outputs (565major+2814562minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170405.PHHmXY/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-04-06 7:16 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-04-06 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170406/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170406/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20170406/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170406/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20170406/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20170406/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20170406/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170406/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170406///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170406//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170406//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170406/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.3::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.3::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/automake sys-devel/autoconf sys-devel/gnuconfig app-arch/xz-utils net-misc/rsync virtual/libc sys-apps/makedev sys-apps/baselayout virtual/os-headers sys-apps/diffutils sys-apps/grep app-arch/tar virtual/pkgconfig app-arch/bzip2 net-misc/wget sys-devel/flex virtual/editor sys-devel/gcc sys-devel/binutils sys-apps/sed sys-apps/less sys-devel/gettext sys-apps/which sys-apps/gawk virtual/shadow sys-devel/make sys-devel/bison sys-apps/file virtual/package-manager app-arch/gzip sys-devel/patch app-shells/bash:0 sys-devel/libtool sys-apps/findutils sys-apps/coreutils sys-apps/net-tools
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] app-portage/elt-patches-20170317
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.22.3_rc4 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.350.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.6.3 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.7::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.4-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170406/.catalyst_lock'
Command exited with non-zero status 1
45.23user 9.48system 1:02.71elapsed 87%CPU (0avgtext+0avgdata 172496maxresident)k
0inputs+0outputs (559major+2815145minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170406.SEC8aI/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-04-07 7:16 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-04-07 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170407/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170407/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20170407/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170407/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20170407/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20170407/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20170407/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170407/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170407///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170407//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170407//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170407/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.3::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.3::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-arch/tar sys-devel/make virtual/libc sys-devel/binutils app-shells/bash:0 sys-apps/findutils app-arch/gzip sys-devel/gcc sys-apps/sed virtual/package-manager virtual/shadow virtual/editor virtual/pkgconfig sys-apps/baselayout sys-devel/libtool sys-apps/makedev sys-apps/less sys-apps/diffutils sys-apps/grep sys-devel/gnuconfig sys-devel/gettext sys-devel/bison sys-apps/coreutils sys-apps/which net-misc/rsync virtual/os-headers sys-devel/autoconf sys-apps/file sys-devel/automake sys-devel/patch sys-apps/gawk net-misc/wget app-arch/bzip2 app-arch/xz-utils sys-devel/flex sys-apps/net-tools
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] app-portage/elt-patches-20170317
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.22.3_rc4 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.350.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.6.3 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.7::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.4-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170407/.catalyst_lock'
Command exited with non-zero status 1
45.55user 9.60system 1:05.29elapsed 84%CPU (0avgtext+0avgdata 172400maxresident)k
0inputs+0outputs (562major+2821057minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170407.dfL62j/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-04-08 7:17 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-04-08 7:17 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170408/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170408/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20170408/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170408/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20170408/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20170408/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20170408/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170408/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170408///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170408//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170408//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170408/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.3::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.3::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/gnuconfig virtual/shadow sys-devel/gcc app-arch/gzip net-misc/wget virtual/pkgconfig app-arch/bzip2 sys-devel/automake app-shells/bash:0 sys-apps/file virtual/libc sys-apps/findutils app-arch/xz-utils sys-devel/make virtual/package-manager sys-apps/less net-misc/rsync app-arch/tar sys-apps/baselayout virtual/os-headers sys-devel/patch sys-apps/gawk sys-apps/makedev sys-apps/diffutils sys-devel/autoconf virtual/editor sys-apps/sed sys-apps/coreutils sys-apps/grep sys-devel/flex sys-apps/net-tools sys-devel/bison sys-devel/gettext sys-devel/libtool sys-apps/which sys-devel/binutils
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] app-portage/elt-patches-20170317
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.22.3_rc4 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.350.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.6.3 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.7::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.4-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170408/.catalyst_lock'
Command exited with non-zero status 1
45.29user 9.48system 1:03.51elapsed 86%CPU (0avgtext+0avgdata 172480maxresident)k
0inputs+0outputs (557major+2815809minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170408.KUIZty/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-04-09 7:17 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-04-09 7:17 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170409/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170409/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20170409/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170409/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20170409/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20170409/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20170409/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170409/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170409///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170409//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170409//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170409/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.3::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.3::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/makedev sys-devel/gcc sys-apps/gawk sys-devel/bison app-arch/xz-utils sys-apps/file net-misc/wget app-arch/bzip2 sys-apps/which virtual/pkgconfig sys-devel/binutils app-shells/bash:0 sys-devel/gnuconfig sys-devel/autoconf virtual/shadow sys-apps/diffutils virtual/package-manager sys-devel/flex app-arch/tar sys-devel/automake sys-apps/baselayout sys-apps/net-tools virtual/editor virtual/os-headers sys-apps/grep virtual/libc sys-apps/sed sys-devel/libtool sys-apps/coreutils sys-devel/gettext sys-devel/patch sys-apps/less sys-apps/findutils sys-devel/make net-misc/rsync app-arch/gzip
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] app-portage/elt-patches-20170317
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.22.3_rc4 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.350.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.6.3 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.7::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.4-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170409/.catalyst_lock'
Command exited with non-zero status 1
45.53user 9.94system 1:10.51elapsed 78%CPU (0avgtext+0avgdata 172448maxresident)k
0inputs+0outputs (557major+2820692minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170409.r4kSTM/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-04-10 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-04-10 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170410/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170410/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20170410/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170410/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20170410/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20170410/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20170410/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170410/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170410///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170410//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170410//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170410/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.3::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.3::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/flex app-arch/bzip2 sys-apps/file net-misc/wget sys-devel/gettext sys-devel/automake app-arch/tar sys-apps/makedev virtual/package-manager virtual/editor sys-devel/binutils sys-devel/libtool virtual/os-headers sys-apps/net-tools sys-apps/findutils app-shells/bash:0 sys-devel/bison sys-apps/gawk sys-apps/which sys-devel/patch virtual/pkgconfig sys-apps/diffutils sys-devel/make sys-devel/autoconf sys-apps/coreutils sys-apps/less net-misc/rsync app-arch/gzip app-arch/xz-utils sys-devel/gnuconfig sys-devel/gcc sys-apps/sed sys-apps/baselayout virtual/shadow virtual/libc sys-apps/grep
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] app-portage/elt-patches-20170317
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.5 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.22.3_rc4 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.350.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.6.3 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.7 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.7::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.4-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170410/.catalyst_lock'
Command exited with non-zero status 1
45.34user 9.29system 1:04.63elapsed 84%CPU (0avgtext+0avgdata 172880maxresident)k
0inputs+0outputs (557major+2822083minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170410.Fj4tEe/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-06-18 7:14 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-06-18 7:14 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20170618/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20170618/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170618/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170618///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170618//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170618//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170618/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/automake sys-devel/flex sys-devel/bison net-misc/rsync sys-apps/sed virtual/package-manager virtual/os-headers virtual/libc sys-devel/libtool sys-apps/findutils sys-apps/file sys-apps/gawk sys-devel/gnuconfig sys-devel/gettext sys-apps/makedev sys-apps/grep sys-devel/autoconf virtual/editor sys-devel/gcc app-arch/tar app-arch/xz-utils sys-devel/make sys-devel/binutils virtual/shadow sys-apps/baselayout app-arch/gzip sys-apps/coreutils sys-devel/patch net-misc/wget sys-apps/net-tools app-shells/bash:0 virtual/pkgconfig app-arch/bzip2 sys-apps/diffutils sys-apps/less sys-apps/which
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.6.3 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=app-admin/eselect-1.4.9 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=dev-lang/perl-5.24.1-r2 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=virtual/perl-Test-Harness-3.360.100_rc ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by perl-core/File-Path-2.130.0::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170618/.catalyst_lock'
Command exited with non-zero status 1
33.01user 5.75system 0:47.97elapsed 80%CPU (0avgtext+0avgdata 167152maxresident)k
0inputs+0outputs (406major+1448260minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170618.wJuPjq/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-06-19 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-06-19 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170619/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170619///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170619//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170619//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170619/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-arch/tar sys-apps/less sys-apps/which sys-devel/libtool sys-devel/automake app-arch/bzip2 sys-apps/file virtual/package-manager virtual/os-headers sys-apps/grep net-misc/rsync sys-devel/flex virtual/libc sys-devel/gcc sys-devel/binutils sys-devel/bison sys-devel/gnuconfig app-shells/bash:0 sys-devel/patch virtual/editor app-arch/gzip sys-apps/coreutils sys-apps/sed sys-devel/gettext net-misc/wget sys-apps/baselayout sys-devel/autoconf sys-devel/make sys-apps/findutils sys-apps/diffutils app-arch/xz-utils sys-apps/gawk virtual/shadow sys-apps/makedev sys-apps/net-tools virtual/pkgconfig
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.6.3 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=virtual/perl-File-Path-2.130.0 ~s390
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.1-r2 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=perl-core/File-Path-2.130.0 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=app-admin/eselect-1.4.9 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=virtual/perl-Test-Harness-3.360.100_rc ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170619/.catalyst_lock'
Command exited with non-zero status 1
32.83user 5.55system 0:46.51elapsed 82%CPU (0avgtext+0avgdata 167280maxresident)k
0inputs+0outputs (406major+1445427minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170619.Ta4qN7/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-06-20 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-06-20 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20170620/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170620/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170620///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170620//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170620//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170620/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep sys-devel/flex sys-apps/sed sys-devel/automake virtual/libc sys-apps/coreutils sys-devel/gnuconfig sys-apps/diffutils app-arch/xz-utils app-arch/tar sys-apps/less sys-devel/patch sys-apps/findutils sys-apps/file app-arch/gzip sys-apps/makedev net-misc/rsync sys-devel/make net-misc/wget virtual/package-manager sys-devel/gcc sys-apps/which virtual/shadow sys-devel/autoconf virtual/editor sys-apps/gawk app-shells/bash:0 virtual/pkgconfig sys-devel/libtool sys-devel/bison app-arch/bzip2 sys-apps/net-tools sys-apps/baselayout sys-devel/gettext sys-devel/binutils virtual/os-headers
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.6.3 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-Test-Harness-3.360.100_rc ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.1-r2 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=app-admin/eselect-1.4.9 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170620/.catalyst_lock'
Command exited with non-zero status 1
32.85user 5.64system 0:46.70elapsed 82%CPU (0avgtext+0avgdata 167344maxresident)k
0inputs+0outputs (409major+1446487minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170620.wjCHHJ/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-06-21 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-06-21 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20170621/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20170621/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20170621/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20170621/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170621/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170621///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170621//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170621//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170621/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-arch/gzip sys-devel/libtool app-arch/tar sys-devel/flex net-misc/rsync virtual/libc sys-apps/makedev sys-devel/gettext sys-devel/automake sys-apps/grep sys-apps/sed sys-devel/gcc virtual/package-manager sys-devel/gnuconfig virtual/shadow sys-apps/which sys-devel/binutils sys-devel/patch sys-apps/less sys-apps/findutils sys-apps/diffutils sys-devel/bison sys-apps/net-tools net-misc/wget virtual/pkgconfig app-arch/xz-utils sys-devel/autoconf app-shells/bash:0 app-arch/bzip2 sys-apps/coreutils virtual/os-headers sys-devel/make sys-apps/gawk sys-apps/file sys-apps/baselayout virtual/editor
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.6.3 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=app-admin/eselect-1.4.9 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=dev-lang/perl-5.24.1-r2 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=virtual/perl-Test-Harness-3.360.100_rc ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170621/.catalyst_lock'
Command exited with non-zero status 1
32.90user 5.76system 0:46.99elapsed 82%CPU (0avgtext+0avgdata 167216maxresident)k
0inputs+0outputs (410major+1445876minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170621.lE6r5n/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-06-22 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-06-22 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20170622/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170622/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170622///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170622//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170622//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170622/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/gettext sys-devel/gnuconfig sys-devel/make sys-devel/libtool virtual/pkgconfig virtual/os-headers sys-devel/bison app-arch/gzip virtual/shadow sys-devel/flex sys-apps/findutils app-shells/bash:0 sys-apps/coreutils sys-apps/less virtual/editor sys-apps/file app-arch/xz-utils net-misc/wget sys-apps/grep virtual/package-manager app-arch/bzip2 sys-devel/gcc sys-apps/baselayout app-arch/tar virtual/libc sys-apps/which sys-devel/binutils sys-apps/net-tools sys-apps/gawk net-misc/rsync sys-devel/automake sys-apps/sed sys-devel/autoconf sys-devel/patch sys-apps/diffutils sys-apps/makedev
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.6.3 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.1-r2 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=app-admin/eselect-1.4.9 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=dev-libs/libffi-3.2.1 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=virtual/perl-Test-Harness-3.360.100_rc ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170622/.catalyst_lock'
Command exited with non-zero status 1
33.07user 5.62system 0:47.01elapsed 82%CPU (0avgtext+0avgdata 167568maxresident)k
0inputs+0outputs (401major+1448504minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170622.dnib1F/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-06-23 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-06-23 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170623/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170623///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170623//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170623//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170623/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/gettext sys-apps/findutils sys-apps/coreutils sys-devel/patch sys-apps/file sys-apps/baselayout virtual/editor sys-apps/sed app-arch/xz-utils sys-devel/make virtual/pkgconfig net-misc/rsync sys-devel/bison sys-apps/gawk sys-devel/autoconf sys-devel/automake app-arch/bzip2 sys-devel/binutils sys-apps/less app-arch/tar sys-devel/gnuconfig virtual/os-headers sys-devel/libtool sys-apps/makedev virtual/package-manager sys-devel/flex app-shells/bash:0 net-misc/wget sys-apps/grep app-arch/gzip sys-apps/which sys-apps/diffutils sys-apps/net-tools sys-devel/gcc virtual/shadow virtual/libc
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.6.3 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.1-r2 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=app-admin/eselect-1.4.9 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-Test-Harness-3.360.100_rc ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170623/.catalyst_lock'
Command exited with non-zero status 1
33.32user 5.90system 0:47.72elapsed 82%CPU (0avgtext+0avgdata 167520maxresident)k
0inputs+0outputs (409major+1448718minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170623.iKcdzY/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-06-24 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-06-24 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20170624/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170624/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170624///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170624//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170624//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170624/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/sed sys-apps/less virtual/package-manager sys-devel/gcc sys-apps/coreutils sys-apps/gawk sys-apps/file virtual/libc sys-devel/libtool net-misc/wget sys-devel/bison virtual/os-headers app-shells/bash:0 virtual/pkgconfig sys-apps/grep sys-devel/gettext sys-apps/makedev sys-devel/make sys-devel/patch app-arch/xz-utils sys-apps/net-tools sys-apps/findutils sys-devel/automake sys-apps/baselayout sys-apps/which sys-apps/diffutils sys-devel/flex net-misc/rsync sys-devel/gnuconfig app-arch/tar virtual/editor sys-devel/binutils app-arch/bzip2 sys-devel/autoconf app-arch/gzip virtual/shadow
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.6.3 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=virtual/perl-Test-Harness-3.360.100_rc ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=dev-libs/libffi-3.2.1 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=app-admin/eselect-1.4.9 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.1-r2 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170624/.catalyst_lock'
Command exited with non-zero status 1
33.13user 5.85system 0:47.55elapsed 81%CPU (0avgtext+0avgdata 167264maxresident)k
0inputs+0outputs (407major+1450157minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170624.RJJPJ3/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-06-25 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-06-25 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20170625/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170625/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170625///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170625//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170625//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170625/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/flex sys-devel/autoconf sys-devel/gettext sys-apps/which sys-devel/gnuconfig sys-apps/coreutils sys-apps/gawk net-misc/rsync sys-apps/diffutils sys-devel/binutils virtual/libc sys-devel/automake sys-apps/findutils sys-apps/baselayout sys-devel/bison virtual/editor sys-apps/file app-arch/gzip app-shells/bash:0 virtual/shadow sys-devel/patch sys-apps/sed sys-apps/net-tools app-arch/bzip2 virtual/pkgconfig sys-apps/less sys-apps/grep sys-devel/libtool sys-devel/make virtual/package-manager app-arch/xz-utils sys-devel/gcc net-misc/wget virtual/os-headers sys-apps/makedev app-arch/tar
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.6.3 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=app-admin/eselect-1.4.9 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=dev-lang/perl-5.24.1-r2 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=virtual/perl-Test-Harness-3.360.100_rc ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170625/.catalyst_lock'
Command exited with non-zero status 1
33.10user 5.84system 0:47.38elapsed 82%CPU (0avgtext+0avgdata 167728maxresident)k
0inputs+0outputs (407major+1445819minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170625.N9DVQM/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-06-26 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-06-26 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170626/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170626///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170626//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170626//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170626/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-arch/gzip sys-devel/bison sys-devel/libtool virtual/pkgconfig sys-apps/makedev sys-devel/flex sys-apps/coreutils sys-devel/autoconf app-arch/tar net-misc/wget sys-apps/findutils sys-apps/gawk sys-apps/diffutils sys-devel/gcc sys-devel/gnuconfig sys-apps/file sys-apps/grep sys-devel/gettext sys-apps/net-tools virtual/libc app-shells/bash:0 virtual/editor sys-apps/sed app-arch/xz-utils sys-devel/patch sys-apps/which sys-devel/make sys-devel/binutils sys-devel/automake virtual/package-manager virtual/shadow app-arch/bzip2 virtual/os-headers sys-apps/baselayout sys-apps/less net-misc/rsync
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=dev-libs/libffi-3.2.1 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-Test-Harness-3.360.100_rc ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.1-r2 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=app-admin/eselect-1.4.9 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.8.5 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=perl-core/File-Path-2.130.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170626/.catalyst_lock'
Command exited with non-zero status 1
32.95user 5.67system 0:46.50elapsed 83%CPU (0avgtext+0avgdata 166960maxresident)k
0inputs+0outputs (405major+1447828minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170626.c98wHK/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-06-27 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-06-27 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170627/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170627///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170627//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170627//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170627/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/which sys-apps/baselayout sys-devel/bison virtual/editor sys-apps/coreutils sys-apps/less app-arch/tar sys-devel/gettext sys-apps/grep sys-apps/makedev sys-devel/make app-arch/xz-utils sys-apps/sed net-misc/wget virtual/package-manager sys-apps/findutils app-shells/bash:0 virtual/pkgconfig sys-apps/net-tools sys-apps/file sys-devel/binutils sys-devel/gnuconfig sys-devel/flex sys-devel/gcc sys-apps/diffutils virtual/shadow net-misc/rsync sys-devel/autoconf app-arch/gzip app-arch/bzip2 virtual/os-headers sys-devel/libtool virtual/libc sys-apps/gawk sys-devel/patch sys-devel/automake
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=dev-lang/perl-5.24.1-r2 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Test-Harness-3.360.100_rc ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by virtual/editor-0::gentoo
# required by @system
# required by @world (argument)
=app-editors/nano-2.8.5 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=app-admin/eselect-1.4.9 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170627/.catalyst_lock'
Command exited with non-zero status 1
32.72user 5.61system 0:46.92elapsed 81%CPU (0avgtext+0avgdata 166832maxresident)k
0inputs+0outputs (406major+1448702minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170627.oda371/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-06-28 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-06-28 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170628/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170628///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170628//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170628//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170628/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/gnuconfig sys-devel/make virtual/os-headers net-misc/wget sys-apps/diffutils sys-apps/makedev sys-apps/file sys-devel/gcc sys-apps/which sys-devel/autoconf sys-devel/bison app-shells/bash:0 sys-apps/gawk virtual/shadow app-arch/gzip virtual/package-manager sys-apps/grep sys-apps/coreutils sys-devel/flex sys-apps/net-tools sys-devel/binutils sys-devel/libtool app-arch/xz-utils sys-devel/automake sys-apps/sed virtual/pkgconfig sys-apps/baselayout sys-devel/patch sys-apps/less app-arch/bzip2 sys-apps/findutils net-misc/rsync virtual/libc virtual/editor sys-devel/gettext app-arch/tar
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.5 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=app-admin/eselect-1.4.9 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-Test-Harness-3.360.100_rc ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.8.5 ~s390
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=dev-lang/perl-5.24.1-r2 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170628/.catalyst_lock'
Command exited with non-zero status 1
33.09user 5.71system 0:47.98elapsed 80%CPU (0avgtext+0avgdata 166864maxresident)k
0inputs+0outputs (410major+1445797minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170628.PqXZKs/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-06-29 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-06-29 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170629/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170629///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170629//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170629//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170629/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot net-misc/wget sys-apps/grep app-arch/xz-utils sys-apps/coreutils sys-devel/bison app-arch/tar sys-apps/file sys-devel/make virtual/package-manager sys-devel/gcc sys-devel/autoconf sys-apps/net-tools net-misc/rsync virtual/shadow sys-apps/gawk sys-apps/baselayout sys-apps/sed sys-devel/gettext virtual/pkgconfig sys-apps/diffutils virtual/libc app-shells/bash:0 sys-devel/flex app-arch/gzip sys-apps/which sys-devel/libtool app-arch/bzip2 sys-devel/gnuconfig sys-apps/less sys-apps/makedev virtual/editor sys-apps/findutils sys-devel/binutils sys-devel/patch sys-devel/automake virtual/os-headers
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.5 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=app-admin/eselect-1.4.9 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=virtual/perl-Test-Harness-3.360.100_rc ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by virtual/editor-0::gentoo
# required by @system
# required by @world (argument)
=app-editors/nano-2.8.5 ~s390
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.1-r2 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-libs/libffi-3.2.1 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=perl-core/File-Path-2.130.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170629/.catalyst_lock'
Command exited with non-zero status 1
33.17user 6.05system 0:47.83elapsed 82%CPU (0avgtext+0avgdata 166752maxresident)k
0inputs+0outputs (406major+1446274minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170629.JQlWH2/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-06-30 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-06-30 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170630///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170630//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170630//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170630/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/less sys-apps/findutils sys-devel/binutils sys-devel/gcc sys-apps/file virtual/os-headers sys-devel/automake sys-apps/net-tools sys-devel/flex sys-apps/gawk sys-devel/bison sys-apps/grep sys-devel/gettext app-arch/tar virtual/editor sys-apps/sed sys-devel/autoconf app-arch/gzip sys-devel/libtool net-misc/rsync net-misc/wget virtual/libc virtual/pkgconfig sys-apps/which app-arch/bzip2 sys-apps/baselayout sys-devel/patch sys-apps/makedev virtual/package-manager app-arch/xz-utils sys-devel/gnuconfig sys-apps/coreutils sys-devel/make virtual/shadow app-shells/bash:0 sys-apps/diffutils
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by virtual/editor-0::gentoo
# required by @system
# required by @world (argument)
=app-editors/nano-2.8.5 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=dev-libs/libffi-3.2.1 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=virtual/perl-Test-Harness-3.360.100_rc ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=dev-lang/perl-5.24.1-r2 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=app-admin/eselect-1.4.9 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170630/.catalyst_lock'
Command exited with non-zero status 1
32.92user 5.69system 0:46.37elapsed 83%CPU (0avgtext+0avgdata 166784maxresident)k
0inputs+0outputs (405major+1445404minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170630.F5CfHV/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-01 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-01 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170701///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170701//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170701//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170701/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-arch/tar sys-devel/make virtual/os-headers sys-apps/which sys-devel/patch sys-devel/libtool app-shells/bash:0 sys-devel/gettext sys-apps/less sys-apps/gawk sys-apps/sed app-arch/xz-utils sys-apps/diffutils virtual/shadow net-misc/rsync sys-devel/bison sys-devel/gcc virtual/pkgconfig sys-apps/net-tools net-misc/wget app-arch/gzip virtual/package-manager sys-apps/coreutils sys-apps/grep sys-devel/binutils app-arch/bzip2 sys-devel/flex sys-apps/makedev virtual/editor sys-devel/automake sys-apps/baselayout virtual/libc sys-devel/gnuconfig sys-devel/autoconf sys-apps/file sys-apps/findutils
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.5 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.8.5 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-Test-Harness-3.360.100_rc ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=dev-libs/libffi-3.2.1 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=app-admin/eselect-1.4.9 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.1-r2 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=perl-core/File-Path-2.130.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170701/.catalyst_lock'
Command exited with non-zero status 1
32.93user 5.64system 0:46.90elapsed 82%CPU (0avgtext+0avgdata 167376maxresident)k
0inputs+0outputs (408major+1446979minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170701.Iz1OAl/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-02 7:14 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-02 7:14 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170702/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170702///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170702//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170702//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170702/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot virtual/package-manager app-arch/xz-utils sys-apps/file sys-apps/less sys-apps/coreutils virtual/editor sys-devel/autoconf sys-apps/sed sys-apps/gawk sys-devel/gcc virtual/shadow virtual/pkgconfig sys-devel/libtool sys-apps/which sys-apps/findutils app-arch/bzip2 sys-devel/binutils net-misc/wget virtual/os-headers sys-devel/gettext sys-devel/gnuconfig sys-apps/diffutils sys-devel/flex sys-devel/bison virtual/libc sys-devel/automake sys-apps/makedev net-misc/rsync sys-devel/make sys-apps/net-tools app-shells/bash:0 app-arch/tar sys-devel/patch sys-apps/grep app-arch/gzip sys-apps/baselayout
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.5 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.1-r2 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=dev-libs/libffi-3.2.1 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Test-Harness-3.360.100_rc ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.8.5 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=app-admin/eselect-1.4.9 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170702/.catalyst_lock'
Command exited with non-zero status 1
32.87user 5.65system 0:46.20elapsed 83%CPU (0avgtext+0avgdata 166784maxresident)k
0inputs+0outputs (408major+1446567minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170702.YbcHoC/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-03 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-03 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170703/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170703///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170703//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170703//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170703/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-arch/tar virtual/pkgconfig sys-devel/libtool sys-devel/binutils app-arch/xz-utils sys-apps/file sys-devel/gettext sys-devel/gnuconfig sys-devel/make sys-apps/sed virtual/libc sys-apps/makedev app-arch/gzip sys-apps/gawk app-arch/bzip2 sys-apps/less sys-apps/which virtual/editor virtual/package-manager sys-devel/autoconf net-misc/rsync virtual/shadow virtual/os-headers sys-devel/gcc sys-devel/bison sys-devel/patch net-misc/wget sys-apps/diffutils sys-devel/automake sys-apps/findutils sys-apps/net-tools sys-devel/flex app-shells/bash:0 sys-apps/coreutils sys-apps/grep sys-apps/baselayout
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.25 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=dev-libs/libffi-3.2.1 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.8.5 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-Test-Harness-3.360.100_rc ~s390
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.1-r2 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=app-admin/eselect-1.4.9 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170703/.catalyst_lock'
Command exited with non-zero status 1
32.72user 5.50system 0:46.16elapsed 82%CPU (0avgtext+0avgdata 166960maxresident)k
0inputs+0outputs (408major+1446447minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170703.qp9H1e/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-04 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-04 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170704///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170704//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170704//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170704/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/gawk app-arch/tar net-misc/wget app-arch/gzip sys-devel/gettext sys-devel/binutils virtual/package-manager sys-apps/coreutils virtual/editor sys-apps/file sys-devel/automake sys-devel/autoconf virtual/libc sys-devel/gcc sys-devel/patch app-arch/bzip2 app-shells/bash:0 sys-apps/net-tools sys-devel/bison virtual/shadow sys-apps/makedev sys-apps/grep virtual/pkgconfig sys-devel/gnuconfig sys-apps/findutils sys-apps/sed sys-apps/which net-misc/rsync sys-apps/baselayout sys-apps/diffutils sys-apps/less sys-devel/libtool sys-devel/make app-arch/xz-utils virtual/os-headers sys-devel/flex
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.5 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=app-admin/eselect-1.4.9 ~s390
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.1-r2 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=virtual/perl-Test-Harness-3.360.100_rc ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by virtual/editor-0::gentoo
# required by @system
# required by @world (argument)
=app-editors/nano-2.8.5 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170704/.catalyst_lock'
Command exited with non-zero status 1
33.14user 5.97system 0:47.66elapsed 82%CPU (0avgtext+0avgdata 167136maxresident)k
0inputs+0outputs (384major+1445448minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170704.IP9RME/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-05 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-05 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170705///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170705//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170705//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170705/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/flex sys-devel/automake net-misc/wget sys-apps/grep virtual/package-manager sys-devel/bison virtual/libc sys-apps/file sys-apps/findutils app-arch/bzip2 virtual/editor sys-apps/less virtual/os-headers app-arch/xz-utils sys-apps/makedev sys-devel/binutils virtual/pkgconfig sys-apps/sed sys-devel/gettext sys-devel/patch sys-devel/libtool sys-apps/net-tools virtual/shadow sys-devel/gcc app-arch/tar sys-apps/which sys-apps/baselayout sys-devel/autoconf net-misc/rsync sys-devel/make sys-apps/diffutils sys-apps/gawk sys-apps/coreutils sys-devel/gnuconfig app-shells/bash:0 app-arch/gzip
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.5 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=dev-lang/perl-5.24.1-r2 ~s390
# required by virtual/editor-0::gentoo
# required by @system
# required by @world (argument)
=app-editors/nano-2.8.5 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=virtual/perl-Test-Harness-3.360.100_rc ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=virtual/perl-File-Path-2.130.0 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=perl-core/File-Path-2.130.0 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=app-admin/eselect-1.4.9 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170705/.catalyst_lock'
Command exited with non-zero status 1
32.96user 5.63system 0:47.29elapsed 81%CPU (0avgtext+0avgdata 167008maxresident)k
0inputs+0outputs (413major+1445536minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170705.RuntFb/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-06 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-06 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170706///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170706//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170706//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170706/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/patch sys-apps/net-tools sys-apps/sed virtual/editor sys-apps/makedev sys-apps/baselayout sys-devel/gnuconfig sys-devel/autoconf sys-apps/gawk sys-devel/make sys-devel/bison sys-devel/libtool sys-devel/gettext app-arch/bzip2 net-misc/wget virtual/package-manager sys-apps/which app-arch/xz-utils sys-devel/flex sys-devel/automake sys-devel/binutils sys-devel/gcc virtual/os-headers app-arch/tar virtual/libc sys-apps/coreutils sys-apps/findutils sys-apps/file net-misc/rsync sys-apps/less app-arch/gzip sys-apps/diffutils app-shells/bash:0 virtual/shadow sys-apps/grep virtual/pkgconfig
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by perl-core/File-Path-2.130.0::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=app-admin/eselect-1.4.9 ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.8.5 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by perl-core/File-Path-2.130.0::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Test-Harness-3.360.100_rc ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by perl-core/File-Path-2.130.0::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by perl-core/File-Path-2.130.0::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=dev-lang/perl-5.24.1-r2 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by perl-core/File-Path-2.130.0::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=dev-libs/libffi-3.2.1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170706/.catalyst_lock'
Command exited with non-zero status 1
33.59user 6.01system 0:48.50elapsed 81%CPU (0avgtext+0avgdata 167040maxresident)k
0inputs+0outputs (407major+1448539minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170706.joIkUn/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-07 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-07 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170707///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170707//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170707//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170707/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/findutils sys-devel/flex sys-apps/makedev sys-devel/automake sys-apps/sed sys-devel/gcc virtual/libc sys-devel/make sys-apps/baselayout sys-devel/patch sys-apps/diffutils net-misc/rsync sys-apps/gawk sys-devel/libtool sys-apps/less sys-devel/binutils virtual/shadow sys-apps/net-tools sys-apps/grep app-shells/bash:0 virtual/editor sys-devel/gettext app-arch/xz-utils sys-devel/bison sys-apps/which app-arch/bzip2 sys-devel/gnuconfig virtual/pkgconfig sys-apps/file sys-apps/coreutils app-arch/gzip sys-devel/autoconf virtual/package-manager net-misc/wget app-arch/tar virtual/os-headers
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=virtual/perl-Test-Harness-3.360.100_rc ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=dev-lang/perl-5.24.1-r2 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=app-admin/eselect-1.4.9 ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.8.5 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170707/.catalyst_lock'
Command exited with non-zero status 1
33.22user 5.90system 0:48.11elapsed 81%CPU (0avgtext+0avgdata 167152maxresident)k
0inputs+0outputs (404major+1445220minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170707.gNyHsN/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-08 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-08 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170708///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170708//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170708//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170708/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/less virtual/package-manager sys-apps/gawk sys-apps/baselayout sys-apps/findutils sys-devel/make sys-devel/gcc sys-apps/makedev sys-devel/flex sys-devel/autoconf sys-apps/sed sys-devel/gettext sys-apps/coreutils virtual/shadow sys-devel/libtool app-arch/tar sys-apps/diffutils sys-apps/net-tools sys-apps/grep sys-devel/patch sys-devel/automake app-arch/xz-utils virtual/os-headers net-misc/rsync virtual/libc sys-devel/bison sys-apps/which virtual/pkgconfig app-arch/gzip sys-devel/gnuconfig virtual/editor sys-apps/file net-misc/wget sys-devel/binutils app-shells/bash:0 app-arch/bzip2
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.5 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.1-r2 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Test-Harness-3.360.100_rc ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.8.5 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=app-admin/eselect-1.4.9 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170708/.catalyst_lock'
Command exited with non-zero status 1
32.83user 5.61system 0:46.45elapsed 82%CPU (0avgtext+0avgdata 167520maxresident)k
0inputs+0outputs (403major+1447345minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170708.kGNyFJ/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-09 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-09 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170709///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170709//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170709//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170709/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/libtool sys-apps/gawk sys-devel/flex net-misc/rsync net-misc/wget app-arch/bzip2 virtual/shadow sys-apps/grep sys-apps/diffutils sys-devel/automake sys-apps/net-tools sys-devel/autoconf sys-devel/bison sys-devel/binutils virtual/editor sys-apps/which app-arch/xz-utils sys-devel/gnuconfig virtual/os-headers sys-apps/baselayout virtual/libc app-shells/bash:0 sys-apps/findutils app-arch/gzip app-arch/tar sys-devel/make virtual/package-manager sys-devel/gettext sys-apps/file virtual/pkgconfig sys-devel/patch sys-apps/less sys-apps/coreutils sys-devel/gcc sys-apps/makedev sys-apps/sed
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.5 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=virtual/perl-Test-Harness-3.360.100_rc ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=app-admin/eselect-1.4.9 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.8.5 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=dev-lang/perl-5.24.1-r2 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=virtual/perl-File-Path-2.130.0 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=perl-core/File-Path-2.130.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170709/.catalyst_lock'
Command exited with non-zero status 1
33.02user 5.62system 0:47.84elapsed 80%CPU (0avgtext+0avgdata 166864maxresident)k
0inputs+0outputs (407major+1444872minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170709.jG4xhx/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-10 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-10 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170710///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170710//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170710//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170710/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/file sys-devel/automake sys-apps/sed sys-devel/bison sys-apps/which app-arch/tar sys-apps/makedev sys-apps/gawk sys-devel/libtool sys-apps/less sys-apps/net-tools sys-devel/autoconf virtual/shadow sys-devel/gnuconfig sys-devel/patch virtual/pkgconfig virtual/editor sys-apps/coreutils sys-devel/make virtual/os-headers app-arch/xz-utils sys-apps/grep net-misc/wget virtual/libc net-misc/rsync virtual/package-manager sys-apps/baselayout app-arch/bzip2 sys-devel/binutils sys-devel/flex app-arch/gzip sys-apps/findutils sys-apps/diffutils sys-devel/gettext app-shells/bash:0 sys-devel/gcc
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.5 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by sys-devel/autoconf-2.69::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=app-admin/eselect-1.4.9 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by sys-devel/autoconf-2.69::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by sys-devel/autoconf-2.69::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=perl-core/File-Path-2.130.0 ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.8.5 ~s390
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.1-r2 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by sys-devel/autoconf-2.69::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by sys-devel/autoconf-2.69::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=virtual/perl-File-Path-2.130.0 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by sys-devel/autoconf-2.69::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=virtual/perl-Test-Harness-3.360.100_rc ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170710/.catalyst_lock'
Command exited with non-zero status 1
33.11user 5.77system 0:48.15elapsed 80%CPU (0avgtext+0avgdata 167552maxresident)k
0inputs+0outputs (384major+1447756minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170710.wuXtAf/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-11 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-11 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170711///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170711//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170711//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170711/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/make app-arch/bzip2 sys-apps/sed sys-apps/baselayout virtual/editor sys-devel/autoconf net-misc/wget sys-devel/gcc virtual/os-headers app-arch/xz-utils sys-apps/grep sys-apps/less sys-devel/flex sys-devel/libtool sys-devel/gnuconfig app-arch/tar sys-apps/which app-shells/bash:0 sys-devel/gettext sys-apps/makedev app-arch/gzip sys-apps/gawk virtual/shadow sys-apps/net-tools sys-devel/binutils sys-apps/findutils virtual/libc sys-devel/patch virtual/package-manager sys-apps/file net-misc/rsync sys-devel/bison virtual/pkgconfig sys-devel/automake sys-apps/diffutils sys-apps/coreutils
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=dev-lang/perl-5.24.1-r2 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Test-Harness-3.360.100_rc ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=app-admin/eselect-1.4.9 ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.8.5 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170711/.catalyst_lock'
Command exited with non-zero status 1
33.09user 6.14system 0:47.64elapsed 82%CPU (0avgtext+0avgdata 166512maxresident)k
0inputs+0outputs (406major+1449607minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170711.44Ncs5/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-12 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-12 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170712/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170712///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170712//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170712//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170712/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-shells/bash:0 sys-devel/gnuconfig sys-apps/grep sys-devel/gcc sys-devel/make app-arch/tar sys-devel/automake sys-devel/patch sys-devel/binutils virtual/pkgconfig sys-devel/flex sys-devel/bison sys-apps/file app-arch/xz-utils net-misc/wget sys-apps/baselayout virtual/editor virtual/package-manager sys-apps/makedev sys-devel/autoconf sys-devel/libtool sys-apps/less sys-apps/coreutils virtual/libc sys-apps/which sys-apps/gawk virtual/shadow sys-apps/diffutils sys-devel/gettext app-arch/gzip sys-apps/findutils net-misc/rsync virtual/os-headers sys-apps/net-tools app-arch/bzip2 sys-apps/sed
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=app-admin/eselect-1.4.9 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by virtual/editor-0::gentoo
# required by @system
# required by @world (argument)
=app-editors/nano-2.8.5 ~s390
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.1-r2 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=virtual/perl-Test-Harness-3.360.100_rc ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170712/.catalyst_lock'
Command exited with non-zero status 1
33.20user 5.76system 0:48.27elapsed 80%CPU (0avgtext+0avgdata 166848maxresident)k
0inputs+0outputs (407major+1447187minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170712.dFSLoV/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-13 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-13 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170713///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170713//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170713//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170713/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/gnuconfig sys-apps/baselayout app-arch/gzip sys-devel/bison sys-apps/grep sys-devel/automake app-shells/bash:0 virtual/pkgconfig virtual/os-headers sys-apps/coreutils sys-devel/gettext sys-apps/which sys-apps/sed app-arch/tar virtual/libc sys-devel/flex net-misc/wget sys-apps/findutils sys-devel/patch app-arch/xz-utils virtual/editor sys-devel/make sys-devel/libtool sys-devel/gcc sys-apps/less app-arch/bzip2 sys-devel/autoconf sys-apps/file sys-apps/makedev virtual/shadow sys-apps/gawk sys-apps/net-tools net-misc/rsync sys-devel/binutils sys-apps/diffutils virtual/package-manager
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=app-admin/eselect-1.4.9 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=virtual/perl-Test-Harness-3.360.100_rc ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.8.5 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=dev-libs/libffi-3.2.1 ~s390
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.1-r2 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170713/.catalyst_lock'
Command exited with non-zero status 1
33.81user 6.46system 0:48.65elapsed 82%CPU (0avgtext+0avgdata 166816maxresident)k
0inputs+0outputs (406major+1449296minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170713.fdBbZZ/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-14 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-14 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170714///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170714//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170714//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170714/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/net-tools virtual/shadow sys-devel/automake virtual/os-headers virtual/libc sys-devel/autoconf virtual/package-manager sys-apps/baselayout sys-apps/diffutils app-arch/tar sys-apps/grep sys-devel/libtool sys-apps/gawk sys-devel/gcc app-arch/xz-utils sys-apps/sed app-arch/gzip sys-apps/coreutils app-arch/bzip2 sys-apps/less sys-devel/patch sys-apps/findutils sys-devel/gettext sys-devel/gnuconfig app-shells/bash:0 sys-devel/bison sys-devel/flex net-misc/wget virtual/editor net-misc/rsync virtual/pkgconfig sys-devel/binutils sys-devel/make sys-apps/which sys-apps/file sys-apps/makedev
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.5 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by perl-core/File-Path-2.130.0::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=app-admin/eselect-1.4.9 ~s390
# required by virtual/editor-0::gentoo
# required by @system
# required by @world (argument)
=app-editors/nano-2.8.5 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=perl-core/File-Path-2.130.0 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by perl-core/File-Path-2.130.0::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Test-Harness-3.360.100_rc ~s390
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=dev-lang/perl-5.24.1-r2 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by perl-core/File-Path-2.130.0::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170714/.catalyst_lock'
Command exited with non-zero status 1
33.02user 5.66system 0:48.36elapsed 79%CPU (0avgtext+0avgdata 166752maxresident)k
0inputs+0outputs (408major+1453163minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170714.LkTCSG/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-15 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-15 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170715/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170715///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170715//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170715//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170715/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/which sys-devel/autoconf app-arch/bzip2 virtual/os-headers virtual/libc virtual/shadow sys-devel/binutils sys-apps/gawk sys-apps/file sys-apps/less app-arch/gzip sys-apps/grep sys-devel/libtool app-arch/xz-utils net-misc/rsync virtual/editor sys-apps/diffutils sys-apps/sed sys-apps/findutils sys-devel/bison sys-devel/flex sys-devel/gnuconfig virtual/pkgconfig sys-devel/automake sys-devel/make net-misc/wget sys-devel/patch sys-devel/gcc sys-devel/gettext app-shells/bash:0 virtual/package-manager sys-apps/makedev app-arch/tar sys-apps/coreutils sys-apps/baselayout sys-apps/net-tools
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by virtual/perl-Test-Harness-3.360.100_rc::gentoo
=dev-lang/perl-5.24.1-r2 ~s390
# required by virtual/editor-0::gentoo
# required by @system
# required by @world (argument)
=app-editors/nano-2.8.5 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=app-admin/eselect-1.4.9 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by dev-lang/perl-5.24.1-r2::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Test-Harness-3.360.100_rc ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170715/.catalyst_lock'
Command exited with non-zero status 1
32.87user 5.50system 0:47.58elapsed 80%CPU (0avgtext+0avgdata 167088maxresident)k
0inputs+0outputs (410major+1447069minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170715.T7priD/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-16 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-16 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170716/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170716///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170716//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170716//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170716/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/file sys-devel/gcc sys-apps/baselayout app-shells/bash:0 net-misc/wget sys-apps/grep sys-devel/libtool sys-apps/less sys-apps/net-tools virtual/libc app-arch/xz-utils sys-devel/binutils virtual/package-manager app-arch/bzip2 sys-devel/gettext sys-devel/automake net-misc/rsync sys-apps/sed virtual/shadow sys-apps/gawk app-arch/tar sys-devel/patch virtual/editor sys-devel/gnuconfig sys-apps/diffutils sys-devel/flex virtual/pkgconfig sys-apps/coreutils sys-devel/bison sys-devel/make sys-devel/autoconf sys-apps/findutils sys-apps/makedev app-arch/gzip virtual/os-headers sys-apps/which
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.5 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-Test-Harness-3.360.100_rc-r1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.8.5 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=app-admin/eselect-1.4.9 ~s390
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.2 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=perl-core/File-Path-2.130.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170716/.catalyst_lock'
Command exited with non-zero status 1
32.88user 5.66system 0:47.78elapsed 80%CPU (0avgtext+0avgdata 167296maxresident)k
0inputs+0outputs (407major+1445435minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170716.lkEDeZ/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-17 7:14 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-17 7:14 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170717///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170717//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170717//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170717/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/gawk sys-devel/binutils sys-apps/diffutils sys-devel/gettext sys-apps/makedev virtual/shadow sys-devel/autoconf sys-apps/findutils sys-devel/flex sys-devel/make sys-devel/patch sys-apps/file virtual/package-manager net-misc/wget sys-apps/coreutils virtual/os-headers sys-devel/gnuconfig sys-apps/which sys-devel/gcc sys-apps/less virtual/libc app-arch/gzip sys-apps/grep app-arch/bzip2 sys-apps/baselayout app-shells/bash:0 sys-devel/automake sys-devel/libtool app-arch/tar net-misc/rsync sys-apps/net-tools sys-devel/bison sys-apps/sed virtual/editor app-arch/xz-utils virtual/pkgconfig
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.5 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-Test-Harness-3.360.100_rc-r1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=app-admin/eselect-1.4.9 ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.8.5 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=dev-libs/libffi-3.2.1 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.2 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170717/.catalyst_lock'
Command exited with non-zero status 1
32.83user 5.52system 0:46.34elapsed 82%CPU (0avgtext+0avgdata 167008maxresident)k
0inputs+0outputs (400major+1447129minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170717.JMCgdG/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-18 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-18 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170718/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170718///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170718//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170718//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170718/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/coreutils sys-apps/findutils sys-apps/grep sys-apps/gawk sys-devel/autoconf sys-devel/make sys-apps/makedev net-misc/rsync virtual/editor virtual/shadow sys-apps/file sys-apps/net-tools sys-apps/less virtual/libc sys-devel/patch virtual/package-manager sys-devel/gettext app-shells/bash:0 virtual/pkgconfig virtual/os-headers net-misc/wget sys-apps/baselayout app-arch/bzip2 sys-devel/flex app-arch/tar sys-devel/binutils app-arch/gzip sys-apps/sed app-arch/xz-utils sys-devel/libtool sys-apps/which sys-devel/bison sys-devel/automake sys-apps/diffutils sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=app-admin/eselect-1.4.9 ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.8.5 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=virtual/perl-Test-Harness-3.360.100_rc-r1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.2 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170718/.catalyst_lock'
Command exited with non-zero status 1
33.00user 5.61system 0:47.73elapsed 80%CPU (0avgtext+0avgdata 167392maxresident)k
0inputs+0outputs (391major+1442896minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170718.gO37ll/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-19 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-19 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170719///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170719//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170719//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170719/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot net-misc/wget sys-devel/patch sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/sed app-arch/tar sys-apps/baselayout sys-devel/flex virtual/os-headers sys-apps/file virtual/editor sys-apps/gawk sys-devel/automake sys-devel/binutils virtual/package-manager app-arch/gzip virtual/pkgconfig app-arch/bzip2 sys-apps/coreutils sys-apps/net-tools virtual/shadow app-shells/bash:0 sys-apps/less sys-devel/gnuconfig net-misc/rsync sys-apps/findutils sys-apps/which sys-devel/bison sys-apps/grep sys-apps/makedev sys-devel/autoconf sys-devel/make sys-devel/gcc virtual/libc app-arch/xz-utils
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-Test-Harness-3.360.100_rc-r1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by virtual/perl-Test-Harness-3.360.100_rc-r1::gentoo
=dev-lang/perl-5.24.2 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=app-admin/eselect-1.4.9 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by virtual/editor-0::gentoo
# required by @system
# required by @world (argument)
=app-editors/nano-2.8.5 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170719/.catalyst_lock'
Command exited with non-zero status 1
33.02user 5.53system 0:47.38elapsed 81%CPU (0avgtext+0avgdata 167184maxresident)k
0inputs+0outputs (395major+1444179minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170719.baORcG/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-20 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-20 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170720///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170720//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170720//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170720/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/less sys-apps/diffutils sys-apps/file virtual/editor virtual/shadow net-misc/rsync sys-devel/libtool sys-apps/makedev net-misc/wget sys-apps/baselayout sys-devel/binutils sys-apps/sed sys-devel/gcc virtual/libc sys-devel/patch app-arch/xz-utils sys-devel/bison sys-devel/gettext app-arch/gzip sys-apps/net-tools virtual/package-manager sys-apps/findutils sys-devel/make app-arch/tar sys-apps/grep sys-devel/automake virtual/pkgconfig sys-apps/gawk sys-devel/gnuconfig sys-apps/coreutils sys-devel/autoconf app-shells/bash:0 app-arch/bzip2 sys-devel/flex sys-apps/which virtual/os-headers
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by perl-core/File-Path-2.130.0::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by virtual/perl-Test-Harness-3.360.100_rc-r1::gentoo
=dev-lang/perl-5.24.2 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by perl-core/File-Path-2.130.0::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Test-Harness-3.360.100_rc-r1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by perl-core/File-Path-2.130.0::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.8.5 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=app-admin/eselect-1.4.9 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=perl-core/File-Path-2.130.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170720/.catalyst_lock'
Command exited with non-zero status 1
32.96user 5.50system 0:47.31elapsed 81%CPU (0avgtext+0avgdata 167456maxresident)k
0inputs+0outputs (396major+1449692minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170720.41uoPe/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-21 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-21 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170721///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170721//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170721//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170721/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-arch/bzip2 sys-apps/less sys-apps/makedev sys-apps/sed sys-apps/coreutils sys-devel/gettext app-arch/tar sys-devel/libtool net-misc/wget sys-apps/net-tools sys-devel/bison app-shells/bash:0 virtual/shadow sys-apps/baselayout sys-devel/binutils net-misc/rsync sys-devel/gnuconfig sys-apps/gawk sys-devel/patch sys-apps/which virtual/package-manager virtual/libc virtual/pkgconfig sys-devel/make sys-devel/automake app-arch/gzip virtual/editor sys-apps/diffutils sys-apps/findutils sys-devel/flex virtual/os-headers sys-devel/gcc sys-apps/file sys-devel/autoconf app-arch/xz-utils sys-apps/grep
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.5 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=virtual/perl-Test-Harness-3.360.100_rc-r1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc-r1::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=app-admin/eselect-1.4.9 ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.8.5 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.2 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170721/.catalyst_lock'
Command exited with non-zero status 1
33.17user 5.91system 0:47.72elapsed 81%CPU (0avgtext+0avgdata 167888maxresident)k
0inputs+0outputs (403major+1447230minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170721.162GCN/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-22 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-22 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170722///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170722//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170722//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170722/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-arch/gzip sys-apps/file virtual/os-headers sys-devel/gettext app-arch/bzip2 app-shells/bash:0 sys-devel/gcc sys-apps/grep sys-apps/coreutils sys-apps/findutils sys-devel/patch sys-devel/automake sys-devel/make sys-devel/autoconf sys-apps/sed virtual/editor sys-devel/binutils sys-apps/net-tools app-arch/xz-utils sys-apps/diffutils sys-apps/baselayout virtual/pkgconfig sys-apps/makedev sys-apps/which sys-devel/flex sys-apps/gawk virtual/package-manager net-misc/wget virtual/shadow virtual/libc sys-devel/libtool net-misc/rsync app-arch/tar sys-apps/less sys-devel/gnuconfig sys-devel/bison
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.6 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by dev-lang/perl-5.24.2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc-r1::gentoo
=dev-libs/libffi-3.2.1 ~s390
# required by virtual/editor-0::gentoo
# required by @system
# required by @world (argument)
=app-editors/nano-2.8.6 ~s390
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.2 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=virtual/perl-Test-Harness-3.360.100_rc-r1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc-r1::gentoo
=app-admin/eselect-1.4.9 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170722/.catalyst_lock'
Command exited with non-zero status 1
33.03user 5.59system 0:47.74elapsed 80%CPU (0avgtext+0avgdata 167392maxresident)k
0inputs+0outputs (409major+1446102minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170722.u2zH28/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-23 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-23 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170723///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170723//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170723//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170723/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep sys-apps/sed app-shells/bash:0 sys-devel/gettext sys-apps/coreutils sys-devel/libtool sys-devel/gcc sys-devel/flex sys-apps/file sys-devel/binutils virtual/editor net-misc/rsync sys-devel/bison app-arch/xz-utils sys-apps/findutils sys-apps/which virtual/os-headers app-arch/bzip2 virtual/package-manager sys-apps/makedev sys-apps/diffutils sys-devel/automake app-arch/gzip sys-devel/make virtual/libc sys-devel/patch sys-apps/net-tools net-misc/wget sys-devel/autoconf sys-devel/gnuconfig sys-apps/baselayout virtual/shadow app-arch/tar virtual/pkgconfig sys-apps/less sys-apps/gawk
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.6 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=app-admin/eselect-1.4.9 ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.8.6 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.2 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Test-Harness-3.360.100_rc-r1 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170723/.catalyst_lock'
Command exited with non-zero status 1
33.00user 5.62system 0:48.64elapsed 79%CPU (0avgtext+0avgdata 167792maxresident)k
0inputs+0outputs (398major+1446528minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170723.f2kp3c/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-24 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-24 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170724///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170724//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170724//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170724/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/less net-misc/rsync virtual/pkgconfig sys-apps/findutils sys-apps/makedev sys-devel/patch virtual/package-manager sys-apps/net-tools app-shells/bash:0 sys-devel/binutils virtual/editor sys-apps/file sys-apps/gawk sys-apps/diffutils sys-apps/sed sys-devel/libtool net-misc/wget sys-devel/gettext app-arch/bzip2 sys-devel/make sys-apps/coreutils sys-devel/autoconf sys-devel/automake app-arch/xz-utils sys-devel/bison sys-devel/gnuconfig virtual/shadow sys-devel/flex sys-apps/which sys-apps/baselayout virtual/os-headers app-arch/tar sys-apps/grep sys-devel/gcc app-arch/gzip virtual/libc
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.6 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.2 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-Test-Harness-3.360.100_rc-r1 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=app-admin/eselect-1.4.9 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by virtual/editor-0::gentoo
# required by @system
# required by @world (argument)
=app-editors/nano-2.8.6 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170724/.catalyst_lock'
Command exited with non-zero status 1
33.04user 5.63system 0:47.74elapsed 81%CPU (0avgtext+0avgdata 167696maxresident)k
0inputs+0outputs (403major+1448047minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170724.4nvjaG/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-25 7:16 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-25 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170725///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170725//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170725//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170725/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/bison sys-apps/gawk sys-devel/make app-shells/bash:0 sys-apps/findutils virtual/pkgconfig sys-apps/grep sys-devel/binutils virtual/libc sys-apps/less sys-apps/net-tools virtual/package-manager virtual/editor sys-devel/automake sys-apps/sed net-misc/wget sys-apps/file app-arch/bzip2 sys-apps/makedev app-arch/tar net-misc/rsync sys-devel/gcc sys-devel/flex app-arch/xz-utils sys-devel/libtool sys-devel/autoconf virtual/shadow virtual/os-headers sys-devel/patch app-arch/gzip sys-apps/baselayout sys-apps/coreutils sys-devel/gnuconfig sys-apps/diffutils sys-devel/gettext sys-apps/which
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.6 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=app-admin/eselect-1.4.9 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Test-Harness-3.360.100_rc-r1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.8.6 ~s390
# required by virtual/perl-Test-Harness-3.360.100_rc-r1::gentoo
=dev-lang/perl-5.24.2 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170725/.catalyst_lock'
Command exited with non-zero status 1
33.37user 5.98system 0:50.25elapsed 78%CPU (0avgtext+0avgdata 167872maxresident)k
0inputs+0outputs (409major+1446951minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170725.1EeGxE/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-26 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-26 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170726///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170726//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170726//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170726/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep sys-devel/gnuconfig sys-apps/makedev app-arch/bzip2 sys-apps/coreutils sys-devel/binutils sys-apps/which sys-apps/less virtual/shadow app-shells/bash:0 app-arch/gzip sys-devel/gcc sys-apps/baselayout sys-apps/net-tools virtual/libc sys-devel/gettext net-misc/rsync sys-devel/libtool virtual/package-manager app-arch/tar virtual/editor sys-devel/flex sys-apps/findutils sys-devel/bison virtual/os-headers sys-apps/diffutils sys-apps/sed sys-apps/file virtual/pkgconfig sys-devel/patch net-misc/wget sys-apps/gawk sys-devel/autoconf app-arch/xz-utils sys-devel/make sys-devel/automake
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.6 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by dev-lang/perl-5.24.2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=virtual/perl-Test-Harness-3.360.100_rc-r1 ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.8.6 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=app-admin/eselect-1.4.9 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.2 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=dev-libs/libffi-3.2.1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170726/.catalyst_lock'
Command exited with non-zero status 1
33.07user 5.94system 0:48.05elapsed 81%CPU (0avgtext+0avgdata 167440maxresident)k
0inputs+0outputs (398major+1443380minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170726.Ohgad0/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-27 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-27 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170727///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170727//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170727//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170727/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/gcc sys-apps/findutils sys-devel/gettext app-arch/bzip2 app-shells/bash:0 sys-apps/net-tools sys-apps/less virtual/os-headers virtual/package-manager sys-devel/flex sys-devel/autoconf sys-devel/bison sys-apps/coreutils sys-apps/which sys-apps/baselayout virtual/editor sys-devel/automake sys-apps/diffutils sys-devel/gnuconfig net-misc/wget sys-devel/patch sys-apps/sed virtual/shadow app-arch/xz-utils virtual/pkgconfig sys-apps/gawk sys-devel/libtool app-arch/gzip sys-apps/grep virtual/libc sys-apps/file sys-apps/makedev app-arch/tar net-misc/rsync sys-devel/make sys-devel/binutils
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.6 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=app-admin/eselect-1.4.9 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=virtual/perl-Test-Harness-3.360.100_rc-r1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by virtual/editor-0::gentoo
# required by @system
# required by @world (argument)
=app-editors/nano-2.8.6 ~s390
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.2 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by perl-core/File-Path-2.130.0::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170727/.catalyst_lock'
Command exited with non-zero status 1
33.59user 6.47system 0:52.65elapsed 76%CPU (0avgtext+0avgdata 167824maxresident)k
0inputs+0outputs (407major+1443354minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170727.tlZQ59/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-28 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-28 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170728///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170728//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170728//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170728/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-arch/bzip2 net-misc/wget sys-apps/net-tools sys-apps/findutils sys-devel/gcc sys-apps/grep virtual/libc sys-devel/bison virtual/editor sys-devel/gnuconfig app-arch/xz-utils sys-apps/which sys-devel/automake sys-devel/flex sys-devel/make sys-apps/diffutils sys-devel/binutils app-shells/bash:0 sys-apps/gawk app-arch/tar sys-apps/coreutils sys-apps/file sys-devel/autoconf net-misc/rsync sys-apps/less app-arch/gzip sys-devel/libtool sys-devel/gettext sys-devel/patch virtual/pkgconfig sys-apps/sed sys-apps/baselayout virtual/package-manager virtual/shadow virtual/os-headers sys-apps/makedev
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.6 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=perl-core/File-Path-2.130.0 ~s390
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.2 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=app-admin/eselect-1.4.9 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Test-Harness-3.360.100_rc-r1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=virtual/perl-File-Path-2.130.0 ~s390
# required by virtual/editor-0::gentoo
# required by @system
# required by @world (argument)
=app-editors/nano-2.8.6 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170728/.catalyst_lock'
Command exited with non-zero status 1
33.42user 6.64system 0:49.72elapsed 80%CPU (0avgtext+0avgdata 167392maxresident)k
0inputs+0outputs (406major+1446115minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170728.pnSPZp/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-29 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-29 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170729///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170729//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170729//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170729/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/gettext app-shells/bash:0 sys-apps/gawk sys-devel/gnuconfig virtual/shadow net-misc/wget sys-devel/patch sys-apps/diffutils sys-apps/net-tools virtual/pkgconfig sys-apps/grep app-arch/gzip virtual/editor app-arch/xz-utils sys-devel/autoconf virtual/package-manager sys-apps/findutils app-arch/tar sys-apps/baselayout sys-apps/which virtual/os-headers sys-apps/file app-arch/bzip2 sys-apps/makedev sys-devel/binutils sys-devel/flex sys-devel/gcc sys-apps/sed sys-apps/coreutils sys-devel/bison sys-apps/less sys-devel/make virtual/libc sys-devel/libtool sys-devel/automake net-misc/rsync
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.6 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by virtual/perl-Test-Harness-3.360.100_rc-r1::gentoo
=dev-lang/perl-5.24.2 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=dev-libs/libffi-3.2.1 ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.8.6 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=app-admin/eselect-1.4.9 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-Test-Harness-3.360.100_rc-r1 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170729/.catalyst_lock'
Command exited with non-zero status 1
32.90user 6.16system 0:47.34elapsed 82%CPU (0avgtext+0avgdata 167712maxresident)k
0inputs+0outputs (411major+1444862minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170729.hzD5IQ/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-30 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-30 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170730///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170730//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170730//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170730/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot virtual/package-manager sys-apps/file app-shells/bash:0 sys-devel/gnuconfig sys-apps/sed sys-apps/gawk sys-apps/coreutils virtual/libc app-arch/xz-utils sys-devel/autoconf sys-devel/libtool sys-apps/makedev sys-apps/baselayout virtual/editor sys-devel/flex sys-devel/patch sys-devel/make app-arch/bzip2 app-arch/gzip virtual/pkgconfig sys-devel/gcc sys-apps/which net-misc/rsync sys-apps/less virtual/os-headers sys-apps/diffutils sys-devel/binutils sys-apps/findutils net-misc/wget sys-apps/grep sys-apps/net-tools virtual/shadow app-arch/tar sys-devel/gettext sys-devel/automake sys-devel/bison
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.6 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by sys-devel/autoconf-2.69::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by sys-devel/autoconf-2.69::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by sys-devel/autoconf-2.69::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=app-admin/eselect-1.4.9 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by sys-devel/autoconf-2.69::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=virtual/perl-Test-Harness-3.360.100_rc-r1 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by sys-devel/autoconf-2.69::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=perl-core/File-Path-2.130.0 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by sys-devel/autoconf-2.69::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=virtual/perl-File-Path-2.130.0 ~s390
# required by virtual/perl-Test-Harness-3.360.100_rc-r1::gentoo
=dev-lang/perl-5.24.2 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.8.6 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170730/.catalyst_lock'
Command exited with non-zero status 1
33.12user 5.88system 0:47.19elapsed 82%CPU (0avgtext+0avgdata 167600maxresident)k
0inputs+0outputs (386major+1446261minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170730.MdrSaH/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-07-31 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-07-31 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170731///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170731//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170731//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170731/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-arch/gzip virtual/shadow sys-devel/gnuconfig virtual/editor sys-apps/file sys-devel/gettext sys-devel/make sys-devel/flex sys-devel/autoconf sys-apps/sed sys-devel/patch sys-devel/gcc virtual/package-manager net-misc/rsync sys-apps/findutils app-arch/bzip2 virtual/os-headers sys-devel/automake app-arch/tar sys-apps/grep virtual/libc sys-apps/diffutils sys-apps/baselayout virtual/pkgconfig sys-devel/libtool sys-apps/makedev sys-apps/coreutils sys-apps/which sys-apps/less net-misc/wget sys-apps/gawk sys-devel/bison sys-apps/net-tools app-shells/bash:0 sys-devel/binutils app-arch/xz-utils
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.6 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=app-admin/eselect-1.4.9 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=virtual/perl-Test-Harness-3.360.100_rc-r1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=virtual/perl-File-Path-2.130.0 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.2 ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.8.6 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=perl-core/File-Path-2.130.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170731/.catalyst_lock'
Command exited with non-zero status 1
33.26user 5.85system 0:47.65elapsed 82%CPU (0avgtext+0avgdata 167888maxresident)k
0inputs+0outputs (404major+1449074minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170731.RyxUTN/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-08-01 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-08-01 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170801///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170801//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170801//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170801/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/diffutils virtual/editor virtual/pkgconfig sys-apps/makedev virtual/libc sys-devel/flex sys-apps/gawk sys-apps/grep sys-apps/less sys-apps/net-tools sys-devel/libtool app-arch/gzip net-misc/rsync sys-devel/make virtual/os-headers sys-devel/autoconf net-misc/wget sys-devel/gnuconfig virtual/shadow virtual/package-manager sys-devel/patch app-arch/xz-utils sys-devel/automake sys-devel/bison sys-devel/gettext sys-devel/binutils sys-apps/sed sys-apps/file sys-apps/which sys-devel/gcc app-arch/tar sys-apps/findutils sys-apps/coreutils app-shells/bash:0 sys-apps/baselayout app-arch/bzip2
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.6 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.8.6 ~s390
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.2 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by perl-core/File-Path-2.130.0::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Test-Harness-3.360.100_rc-r1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by perl-core/File-Path-2.130.0::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=app-admin/eselect-1.4.9 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by perl-core/File-Path-2.130.0::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170801/.catalyst_lock'
Command exited with non-zero status 1
34.05user 6.65system 0:50.83elapsed 80%CPU (0avgtext+0avgdata 167728maxresident)k
0inputs+0outputs (402major+1443228minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170801.MOghP6/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-08-02 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-08-02 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170802/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20170802///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170802//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170802//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170802/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot net-misc/wget sys-devel/libtool sys-apps/gawk virtual/package-manager sys-apps/sed app-shells/bash:0 app-arch/bzip2 sys-apps/findutils sys-devel/binutils sys-devel/automake sys-devel/autoconf virtual/pkgconfig sys-apps/net-tools sys-apps/grep virtual/editor sys-devel/gcc sys-devel/gnuconfig app-arch/tar net-misc/rsync sys-apps/makedev sys-apps/coreutils sys-apps/baselayout sys-devel/flex virtual/os-headers sys-apps/less sys-devel/make virtual/shadow sys-apps/file sys-devel/patch app-arch/xz-utils sys-apps/which virtual/libc app-arch/gzip sys-apps/diffutils sys-devel/gettext sys-devel/bison
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.6 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by virtual/editor-0::gentoo
# required by @system
# required by @world (argument)
=app-editors/nano-2.8.6 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by virtual/perl-Test-Harness-3.360.100_rc-r1::gentoo
=dev-lang/perl-5.24.2 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc-r1::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by perl-core/File-Path-2.130.0::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=app-admin/eselect-1.4.9 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Test-Harness-3.360.100_rc-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170802/.catalyst_lock'
Command exited with non-zero status 1
33.85user 6.12system 0:50.66elapsed 78%CPU (0avgtext+0avgdata 168080maxresident)k
0inputs+0outputs (409major+1446432minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170802.kU6zx1/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-08-03 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-08-03 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 10865 bytes --]
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170803//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170803/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
!!! The following installed packages are masked:
- sys-libs/glibc-2.23-r3::gentoo (masked by: package.mask)
/usr/portage/profiles/package.mask:
# Michał Górny <mgorny@gentoo.org>, Andreas K. Hüttel <dilfridge@gentoo.org>,
# Matthias Maier <tamiko@gentoo.org> (21 May 2017)
# These old versions of toolchain packages (binutils, gcc, glibc) are no
# longer officially supported and are not suitable for general use. Using
# these packages can result in build failures (and possible breakage) for
# many packages, and may leave your system vulnerable to known security
# exploits.
#
# If you still use one of these old toolchain packages, please upgrade (and
# in case of gcc switch the compiler) ASAP. If you need them for a specific
# (isolated) use case, feel free to unmask them on your system.
For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot net-misc/wget sys-apps/coreutils sys-apps/grep net-misc/rsync sys-devel/libtool app-shells/bash:0 sys-devel/autoconf virtual/editor sys-devel/gnuconfig sys-apps/less sys-apps/makedev sys-devel/make app-arch/xz-utils app-arch/bzip2 sys-apps/net-tools sys-devel/bison sys-apps/which sys-devel/gcc app-arch/tar sys-apps/sed virtual/package-manager app-arch/gzip sys-devel/automake sys-devel/flex sys-apps/diffutils virtual/shadow sys-apps/baselayout sys-devel/patch virtual/pkgconfig sys-devel/gettext sys-apps/gawk sys-apps/file virtual/os-headers virtual/libc sys-devel/binutils sys-apps/findutils
[ebuild U ] sys-libs/glibc-2.24-r3 [2.23-r3]
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.24-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.6 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=app-admin/eselect-1.4.9 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-Test-Harness-3.360.100_rc-r1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by virtual/libc-1::gentoo
# required by virtual/libc (argument)
=sys-libs/glibc-2.24-r3 ~s390
# required by virtual/perl-Test-Harness-3.360.100_rc-r1::gentoo
=dev-lang/perl-5.24.2 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.8.6 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170803/.catalyst_lock'
Command exited with non-zero status 1
33.96user 6.72system 0:49.79elapsed 81%CPU (0avgtext+0avgdata 169200maxresident)k
0inputs+0outputs (400major+1442758minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170803.2dYGpB/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-08-04 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-08-04 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 10744 bytes --]
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
!!! The following installed packages are masked:
- sys-libs/glibc-2.23-r3::gentoo (masked by: package.mask)
/usr/portage/profiles/package.mask:
# Michał Górny <mgorny@gentoo.org>, Andreas K. Hüttel <dilfridge@gentoo.org>,
# Matthias Maier <tamiko@gentoo.org> (21 May 2017)
# These old versions of toolchain packages (binutils, gcc, glibc) are no
# longer officially supported and are not suitable for general use. Using
# these packages can result in build failures (and possible breakage) for
# many packages, and may leave your system vulnerable to known security
# exploits.
#
# If you still use one of these old toolchain packages, please upgrade (and
# in case of gcc switch the compiler) ASAP. If you need them for a specific
# (isolated) use case, feel free to unmask them on your system.
For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-arch/gzip sys-devel/patch app-shells/bash:0 sys-apps/grep sys-devel/flex sys-devel/automake virtual/package-manager virtual/editor sys-devel/make virtual/os-headers sys-apps/baselayout sys-devel/gcc app-arch/xz-utils sys-apps/net-tools sys-apps/sed net-misc/rsync virtual/libc sys-devel/bison sys-devel/gettext sys-apps/makedev sys-apps/which sys-apps/diffutils sys-apps/coreutils app-arch/bzip2 virtual/pkgconfig sys-devel/autoconf virtual/shadow sys-devel/gnuconfig sys-devel/binutils sys-apps/findutils app-arch/tar sys-apps/gawk sys-apps/less sys-apps/file sys-devel/libtool net-misc/wget
[ebuild U ] sys-libs/glibc-2.24-r3 [2.23-r3]
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.24-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.6 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by virtual/editor-0::gentoo
# required by @system
# required by @world (argument)
=app-editors/nano-2.8.6 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=virtual/perl-Test-Harness-3.360.100_rc-r1 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by virtual/libc-1::gentoo
# required by virtual/libc (argument)
=sys-libs/glibc-2.24-r3 ~s390
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.2 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by sys-devel/automake-1.15::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=app-admin/eselect-1.4.9 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170804/.catalyst_lock'
Command exited with non-zero status 1
34.05user 6.57system 0:51.34elapsed 79%CPU (0avgtext+0avgdata 168832maxresident)k
0inputs+0outputs (405major+1445028minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170804.eJbHFk/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-08-05 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-08-05 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 10825 bytes --]
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170805/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
!!! The following installed packages are masked:
- sys-libs/glibc-2.23-r3::gentoo (masked by: package.mask)
/usr/portage/profiles/package.mask:
# Michał Górny <mgorny@gentoo.org>, Andreas K. Hüttel <dilfridge@gentoo.org>,
# Matthias Maier <tamiko@gentoo.org> (21 May 2017)
# These old versions of toolchain packages (binutils, gcc, glibc) are no
# longer officially supported and are not suitable for general use. Using
# these packages can result in build failures (and possible breakage) for
# many packages, and may leave your system vulnerable to known security
# exploits.
#
# If you still use one of these old toolchain packages, please upgrade (and
# in case of gcc switch the compiler) ASAP. If you need them for a specific
# (isolated) use case, feel free to unmask them on your system.
For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep sys-apps/baselayout virtual/pkgconfig sys-apps/sed sys-apps/which sys-devel/patch sys-apps/less app-arch/tar net-misc/wget virtual/package-manager sys-apps/net-tools virtual/libc virtual/os-headers app-arch/xz-utils sys-apps/file sys-devel/gcc sys-devel/gnuconfig sys-apps/makedev sys-apps/diffutils sys-devel/binutils sys-devel/make virtual/shadow net-misc/rsync sys-devel/gettext app-arch/bzip2 sys-devel/automake sys-devel/autoconf sys-devel/flex sys-apps/gawk sys-devel/libtool sys-devel/bison virtual/editor app-arch/gzip sys-apps/coreutils app-shells/bash:0 sys-apps/findutils
[ebuild U ] sys-libs/glibc-2.24-r3 [2.23-r3]
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.24-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.6 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc-r1::gentoo
=app-admin/eselect-1.4.9 ~s390
# required by virtual/perl-Test-Harness-3.360.100_rc-r1::gentoo
=dev-lang/perl-5.24.2 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=virtual/perl-Test-Harness-3.360.100_rc-r1 ~s390
# required by virtual/libc-1::gentoo
# required by virtual/libc (argument)
=sys-libs/glibc-2.24-r3 ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.8.6 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by app-admin/perl-cleaner-2.20::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc-r1::gentoo
=dev-libs/libffi-3.2.1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170805/.catalyst_lock'
Command exited with non-zero status 1
33.75user 6.64system 0:50.43elapsed 80%CPU (0avgtext+0avgdata 168624maxresident)k
0inputs+0outputs (391major+1446328minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170805.GG2Hbz/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-08-06 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-08-06 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 10771 bytes --]
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
!!! The following installed packages are masked:
- sys-libs/glibc-2.23-r3::gentoo (masked by: package.mask)
/usr/portage/profiles/package.mask:
# Michał Górny <mgorny@gentoo.org>, Andreas K. Hüttel <dilfridge@gentoo.org>,
# Matthias Maier <tamiko@gentoo.org> (21 May 2017)
# These old versions of toolchain packages (binutils, gcc, glibc) are no
# longer officially supported and are not suitable for general use. Using
# these packages can result in build failures (and possible breakage) for
# many packages, and may leave your system vulnerable to known security
# exploits.
#
# If you still use one of these old toolchain packages, please upgrade (and
# in case of gcc switch the compiler) ASAP. If you need them for a specific
# (isolated) use case, feel free to unmask them on your system.
For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/binutils sys-apps/less sys-apps/makedev sys-apps/findutils net-misc/wget sys-devel/autoconf virtual/os-headers sys-devel/flex sys-apps/gawk virtual/shadow app-arch/xz-utils sys-apps/which sys-apps/diffutils sys-devel/gcc sys-apps/file app-arch/tar app-shells/bash:0 sys-devel/libtool sys-apps/sed sys-apps/coreutils sys-apps/grep sys-devel/patch virtual/libc sys-devel/bison app-arch/gzip sys-devel/gettext sys-apps/baselayout app-arch/bzip2 sys-apps/net-tools virtual/editor sys-devel/automake virtual/pkgconfig sys-devel/make net-misc/rsync virtual/package-manager sys-devel/gnuconfig
[ebuild U ] sys-libs/glibc-2.24-r3 [2.23-r3]
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.24-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.6 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.6 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.8.6 ~s390
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.2 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Test-Harness-3.360.100_rc-r1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by virtual/libc-1::gentoo
# required by virtual/libc (argument)
=sys-libs/glibc-2.24-r3 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.6::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.6::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=app-admin/eselect-1.4.9 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=sys-apps/portage-2.3.6 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170806/.catalyst_lock'
Command exited with non-zero status 1
33.67user 6.14system 0:48.89elapsed 81%CPU (0avgtext+0avgdata 166752maxresident)k
0inputs+0outputs (402major+1445678minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170806.YDI7sF/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2017-08-07 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2017-08-07 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 10986 bytes --]
!!! The following installed packages are masked:
- sys-libs/glibc-2.23-r3::gentoo (masked by: package.mask)
/usr/portage/profiles/package.mask:
# Michał Górny <mgorny@gentoo.org>, Andreas K. Hüttel <dilfridge@gentoo.org>,
# Matthias Maier <tamiko@gentoo.org> (21 May 2017)
# These old versions of toolchain packages (binutils, gcc, glibc) are no
# longer officially supported and are not suitable for general use. Using
# these packages can result in build failures (and possible breakage) for
# many packages, and may leave your system vulnerable to known security
# exploits.
#
# If you still use one of these old toolchain packages, please upgrade (and
# in case of gcc switch the compiler) ASAP. If you need them for a specific
# (isolated) use case, feel free to unmask them on your system.
For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot net-misc/wget sys-apps/less sys-devel/libtool virtual/os-headers sys-devel/automake virtual/libc app-arch/xz-utils sys-apps/which sys-apps/sed sys-apps/baselayout sys-devel/gettext sys-devel/make sys-devel/bison sys-devel/gcc sys-devel/flex sys-apps/diffutils sys-apps/net-tools virtual/pkgconfig sys-devel/patch app-shells/bash:0 sys-apps/coreutils sys-apps/file app-arch/bzip2 sys-devel/gnuconfig sys-apps/makedev net-misc/rsync app-arch/tar virtual/editor sys-apps/grep sys-apps/findutils sys-apps/gawk virtual/package-manager virtual/shadow sys-devel/autoconf app-arch/gzip sys-devel/binutils
[ebuild U ] sys-libs/glibc-2.24-r3 [2.23-r3]
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.24-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.6 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.6 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by dev-lang/perl-5.24.2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-Test-Harness-3.360.100_rc-r1 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.6::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=dev-libs/libffi-3.2.1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by virtual/libc-1::gentoo
# required by @system
# required by @world (argument)
=sys-libs/glibc-2.24-r3 ~s390
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=sys-apps/portage-2.3.6 ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.8.6 ~s390
# required by virtual/perl-Test-Harness-3.360.100_rc-r1::gentoo
=dev-lang/perl-5.24.2 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.6::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=app-admin/eselect-1.4.9 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170807/.catalyst_lock'
Command exited with non-zero status 1
33.76user 6.64system 0:49.93elapsed 80%CPU (0avgtext+0avgdata 166528maxresident)k
0inputs+0outputs (406major+1444288minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170807.e4OSmJ/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-01-07 5:45 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-01-07 5:45 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.9.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild U ] app-portage/elt-patches-20170826.1 [20170317]
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild r U ] sys-libs/zlib-1.2.11-r1 [1.2.11]
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild NS ] sys-devel/binutils-2.29.1-r1 [2.26.1]
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild NS ] sys-devel/gcc-7.2.0 [4.9.4]
[ebuild N ] dev-libs/mpc-1.0.3-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.10 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.5 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.26.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.167.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.380.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.26-r5 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.9.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild NS ] dev-lang/python-3.5.4-r1 [2.7.12, 3.4.5]
[ebuild N ] sys-apps/portage-2.3.13 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-7.2.0 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.12.6 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/zlib:0
(sys-libs/zlib-1.2.11-r1:0/1::gentoo, ebuild scheduled for merge) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(sys-libs/zlib-1.2.11:0/0::gentoo, installed) pulled in by
>=sys-libs/zlib-1.1.3:0/0= required by (dev-lang/python-3.4.5:3.4/3.4m::gentoo, installed)
^^^^^
(and 2 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by sys-devel/gcc-config-1.9.1::gentoo
# required by sys-devel/gcc-7.2.0::gentoo
# required by @system
# required by @world (argument)
=sys-apps/gentoo-functions-0.12 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.14-r1::gentoo
# required by sys-apps/portage-2.3.13::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=dev-libs/libffi-3.2.1-r1 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-3.5.4-r1::gentoo
# required by sys-apps/portage-2.3.13::gentoo[python_targets_python3_5]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=app-admin/eselect-1.4.10 ~s390
# required by sys-devel/binutils (argument)
=sys-devel/binutils-2.29.1-r1 ~s390
# required by virtual/libc-1::gentoo
# required by @system
# required by @world (argument)
=sys-libs/glibc-2.26-r5 ~s390
# required by sys-apps/portage-2.3.13::gentoo[python_targets_python3_5]
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=dev-lang/python-3.5.4-r1 ~s390
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-1.15.1-r1 ~s390
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.26.1-r1::gentoo
# required by sys-devel/automake-1.15.1-r1::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-apps/portage-2.3.13 ~s390
# required by dev-lang/perl-5.26.1-r1::gentoo
# required by sys-devel/automake-1.15.1-r1::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=virtual/perl-Data-Dumper-2.167.0 ~s390
# required by virtual/perl-Data-Dumper-2.167.0::gentoo
=dev-lang/perl-5.26.1-r1 ~s390
# required by dev-lang/perl-5.26.1-r1::gentoo
# required by sys-devel/automake-1.15.1-r1::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=virtual/perl-Test-Harness-3.380.0 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by sys-devel/gcc-7.2.0::gentoo
# required by @system
# required by @world (argument)
=dev-libs/mpc-1.0.3-r1 ~s390
# required by virtual/editor-0::gentoo
# required by @system
# required by @world (argument)
=app-editors/nano-2.9.2 ~s390
# required by sys-devel/gettext-0.19.8.1::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/expat-2.2.5 ~s390
# required by sys-devel/gcc (argument)
=sys-devel/gcc-7.2.0 ~s390
# required by sys-devel/gcc-7.2.0::gentoo
# required by @system
# required by @world (argument)
=sys-devel/gcc-config-1.9.1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180107T054253Z/.catalyst_lock'
Command exited with non-zero status 1
35.81user 5.17system 0:40.27elapsed 101%CPU (0avgtext+0avgdata 198352maxresident)k
0inputs+0outputs (409major+1448882minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180107T054253Z.HFWljV/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-01-07 8:17 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-01-07 8:17 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.9.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild U ] app-portage/elt-patches-20170826.1 [20170317]
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild r U ] sys-libs/zlib-1.2.11-r1 [1.2.11]
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild NS ] sys-devel/binutils-2.29.1-r1 [2.26.1]
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild NS ] sys-devel/gcc-7.2.0 [4.9.4]
[ebuild N ] dev-libs/mpc-1.0.3-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.10 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.5 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.26.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.167.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.380.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.26-r5 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.9.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild NS ] dev-lang/python-3.5.4-r1 [2.7.12, 3.4.5]
[ebuild N ] sys-apps/portage-2.3.13 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r1 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-7.2.0 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.12.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/zlib:0
(sys-libs/zlib-1.2.11-r1:0/1::gentoo, ebuild scheduled for merge) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(sys-libs/zlib-1.2.11:0/0::gentoo, installed) pulled in by
>=sys-libs/zlib-1.1.3:0/0= required by (dev-lang/python-2.7.12:2.7/2.7::gentoo, installed)
^^^^^
(and 2 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.9.2 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.14-r1::gentoo
# required by sys-apps/portage-2.3.13::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.26.1-r1::gentoo
# required by sys-devel/autoconf-2.69::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=app-admin/eselect-1.4.10 ~s390
# required by sys-devel/binutils (argument)
=sys-devel/binutils-2.29.1-r1 ~s390
# required by sys-apps/portage-2.3.13::gentoo[python_targets_python3_5]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.26.1-r1::gentoo
# required by sys-devel/autoconf-2.69::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=dev-lang/python-3.5.4-r1 ~s390
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=sys-apps/portage-2.3.13 ~s390
# required by virtual/perl-Test-Harness-3.380.0::gentoo
=dev-lang/perl-5.26.1-r1 ~s390
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-1.15.1-r1 ~s390
# required by sys-devel/gcc-7.2.0::gentoo
# required by @system
# required by @world (argument)
=sys-devel/gcc-config-1.9.1 ~s390
# required by sys-devel/gcc-7.2.0::gentoo
# required by @system
# required by @world (argument)
=dev-libs/mpc-1.0.3-r1 ~s390
# required by dev-lang/perl-5.26.1-r1::gentoo
# required by sys-devel/autoconf-2.69::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=virtual/perl-Test-Harness-3.380.0 ~s390
# required by sys-devel/gettext-0.19.8.1::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/expat-2.2.5 ~s390
# required by dev-lang/perl-5.26.1-r1::gentoo
# required by sys-devel/autoconf-2.69::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=virtual/perl-Data-Dumper-2.167.0 ~s390
# required by virtual/libc-1::gentoo
# required by @system
# required by @world (argument)
=sys-libs/glibc-2.26-r5 ~s390
# required by sys-devel/gcc-config-1.9.1::gentoo
# required by sys-devel/gcc-7.2.0::gentoo
# required by @system
# required by @world (argument)
=sys-apps/gentoo-functions-0.12 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.14-r1::gentoo
# required by sys-apps/portage-2.3.13::gentoo[python_targets_python2_7]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.26.1-r1::gentoo
# required by sys-devel/autoconf-2.69::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=dev-libs/libffi-3.2.1-r1 ~s390
# required by sys-devel/gcc (argument)
=sys-devel/gcc-7.2.0 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180107T081233Z/.catalyst_lock'
Command exited with non-zero status 1
35.93user 5.48system 1:09.72elapsed 59%CPU (0avgtext+0avgdata 197072maxresident)k
0inputs+0outputs (370major+1443545minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180107T081233Z.067tJB/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-01-08 8:14 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-01-08 8:14 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.9.1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild U ] app-portage/elt-patches-20170826.1 [20170317]
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild r U ] sys-libs/zlib-1.2.11-r1 [1.2.11]
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1-r1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild NS ] sys-devel/binutils-2.29.1-r1 [2.26.1]
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild NS ] sys-devel/gcc-7.2.0 [4.9.4]
[ebuild N ] dev-libs/mpc-1.0.3-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.10 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.5 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.26.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.167.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.380.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.26-r5 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.9.2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild NS ] dev-lang/python-3.5.4-r1 [2.7.12, 3.4.5]
[ebuild N ] sys-apps/portage-2.3.13 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-7.2.0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.12.6 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/zlib:0
(sys-libs/zlib-1.2.11-r1:0/1::gentoo, ebuild scheduled for merge) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(sys-libs/zlib-1.2.11:0/0::gentoo, installed) pulled in by
>=sys-libs/zlib-1.2.8-r1:0/0=[abi_s390_32(-)] required by (dev-libs/libxml2-2.9.4-r1:2/2::gentoo, installed)
^^^^^
(and 2 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/portage-2.3.13::gentoo[python_targets_python3_5]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=dev-lang/python-3.5.4-r1 ~s390
# required by virtual/libc-1::gentoo
# required by virtual/libc (argument)
=sys-libs/glibc-2.26-r5 ~s390
# required by virtual/perl-Test-Harness-3.380.0::gentoo
=dev-lang/perl-5.26.1-r1 ~s390
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=sys-apps/portage-2.3.13 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.14-r1::gentoo
# required by sys-apps/portage-2.3.13::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=app-admin/eselect-1.4.10 ~s390
# required by sys-devel/gcc-7.2.0::gentoo
# required by @system
# required by @world (argument)
=dev-libs/mpc-1.0.3-r1 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by dev-lang/perl-5.26.1-r1::gentoo
# required by sys-devel/automake-1.15.1-r1::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=virtual/perl-Test-Harness-3.380.0 ~s390
# required by sys-devel/gcc (argument)
=sys-devel/gcc-7.2.0 ~s390
# required by sys-devel/gcc-config-1.9.1::gentoo
# required by sys-devel/gcc-7.2.0::gentoo
# required by @system
# required by @world (argument)
=sys-apps/gentoo-functions-0.12 ~s390
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-1.15.1-r1 ~s390
# required by sys-devel/gcc-7.2.0::gentoo
# required by @system
# required by @world (argument)
=sys-devel/gcc-config-1.9.1 ~s390
# required by sys-devel/gettext-0.19.8.1::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/expat-2.2.5 ~s390
# required by sys-devel/binutils (argument)
=sys-devel/binutils-2.29.1-r1 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.14-r1::gentoo
# required by sys-apps/portage-2.3.13::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=dev-libs/libffi-3.2.1-r1 ~s390
# required by dev-lang/perl-5.26.1-r1::gentoo
# required by sys-devel/automake-1.15.1-r1::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=virtual/perl-Data-Dumper-2.167.0 ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.9.2 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180108T081149Z/.catalyst_lock'
Command exited with non-zero status 1
35.72user 5.09system 0:38.12elapsed 107%CPU (0avgtext+0avgdata 196912maxresident)k
0inputs+0outputs (400major+1446945minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180108T081149Z.IkvYwx/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-01-09 8:14 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-01-09 8:14 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.9.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild U ] app-portage/elt-patches-20170826.1 [20170317]
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild r U ] sys-libs/zlib-1.2.11-r1 [1.2.11]
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild NS ] sys-devel/binutils-2.29.1-r1 [2.26.1]
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild NS ] sys-devel/gcc-7.2.0 [4.9.4]
[ebuild N ] dev-libs/mpc-1.0.3-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.10 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.5 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.26.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.167.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.380.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.26-r5 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.9.2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild NS ] dev-lang/python-3.5.4-r1 [2.7.12, 3.4.5]
[ebuild N ] sys-apps/portage-2.3.13 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-7.2.0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.12.6 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/zlib:0
(sys-libs/zlib-1.2.11-r1:0/1::gentoo, ebuild scheduled for merge) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(sys-libs/zlib-1.2.11:0/0::gentoo, installed) pulled in by
>=sys-libs/zlib-1.1.3:0/0= required by (dev-lang/python-2.7.12:2.7/2.7::gentoo, installed)
^^^^^
(and 2 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gcc-7.2.0::gentoo
# required by @system
# required by @world (argument)
=dev-libs/mpc-1.0.3-r1 ~s390
# required by sys-devel/gettext-0.19.8.1::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/expat-2.2.5 ~s390
# required by sys-devel/gcc-config-1.9.1::gentoo
# required by sys-devel/gcc-7.2.0::gentoo
# required by @system
# required by @world (argument)
=sys-apps/gentoo-functions-0.12 ~s390
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-1.15.1-r1 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by virtual/perl-Data-Dumper-2.167.0::gentoo
=dev-lang/perl-5.26.1-r1 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-3.5.4-r1::gentoo
# required by sys-apps/portage-2.3.13::gentoo[python_targets_python3_5]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.26.1-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=dev-libs/libffi-3.2.1-r1 ~s390
# required by sys-devel/gcc-7.2.0::gentoo
# required by @system
# required by @world (argument)
=sys-devel/gcc-config-1.9.1 ~s390
# required by sys-devel/gcc (argument)
=sys-devel/gcc-7.2.0 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-3.5.4-r1::gentoo
# required by sys-apps/portage-2.3.13::gentoo[python_targets_python3_5]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.26.1-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=app-admin/eselect-1.4.10 ~s390
# required by dev-lang/perl-5.26.1-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-Test-Harness-3.380.0 ~s390
# required by sys-devel/binutils (argument)
=sys-devel/binutils-2.29.1-r1 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by virtual/editor-0::gentoo
# required by @system
# required by @world (argument)
=app-editors/nano-2.9.2 ~s390
# required by virtual/libc-1::gentoo
# required by @system
# required by @world (argument)
=sys-libs/glibc-2.26-r5 ~s390
# required by sys-apps/portage-2.3.13::gentoo[python_targets_python3_5]
# required by app-admin/perl-cleaner-2.20::gentoo
# required by dev-lang/perl-5.26.1-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=dev-lang/python-3.5.4-r1 ~s390
# required by dev-lang/perl-5.26.1-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-Data-Dumper-2.167.0 ~s390
# required by virtual/package-manager-0::gentoo
# required by @system
# required by @world (argument)
=sys-apps/portage-2.3.13 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180109T081215Z/.catalyst_lock'
Command exited with non-zero status 1
35.77user 5.26system 0:38.25elapsed 107%CPU (0avgtext+0avgdata 197104maxresident)k
0inputs+0outputs (375major+1447596minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180109T081215Z.8qwtg9/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-01-10 8:20 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-01-10 8:20 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 9729 bytes --]
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180110T081028Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180110T081028Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180110T081028Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180110T081028Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180110T081028Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180110T081028Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180110T081028Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180110T081028Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180110T081028Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180110T081028Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
The following packages are causing rebuilds:
(app-arch/bzip2-1.0.6-r8:0/1::gentoo, ebuild scheduled for merge) causes rebuilds for:
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.4.5-r1:3.4/3.4m::gentoo, ebuild scheduled for merge)
(sys-libs/zlib-1.2.11-r1:0/1::gentoo, ebuild scheduled for merge) causes rebuilds for:
(dev-libs/libxml2-2.9.4-r1:2/2::gentoo, ebuild scheduled for merge)
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.4.5-r1:3.4/3.4m::gentoo, ebuild scheduled for merge)
!!! The following installed packages are masked:
- sys-devel/gcc-4.9.4::gentoo (masked by: package.mask)
/usr/portage/profiles/package.mask:
# Michał Górny <mgorny@gentoo.org>, Andreas K. Hüttel <dilfridge@gentoo.org>,
# Matthias Maier <tamiko@gentoo.org> (21 May 2017)
# These old versions of toolchain packages (binutils, gcc, glibc) are no
# longer officially supported and are not suitable for general use. Using
# these packages can result in build failures (and possible breakage) for
# many packages, and may leave your system vulnerable to known security
# exploits.
# If you still use one of these old toolchain packages, please upgrade (and
# switch the compiler / the binutils) ASAP. If you need them for a specific
# (isolated) use case, feel free to unmask them on your system.
# (updated 27 Dec 2017 with gcc < 5.4)
- sys-libs/glibc-2.23-r3::gentoo (masked by: package.mask)
- sys-devel/binutils-2.26.1::gentoo (masked by: package.mask)
For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.
>>> Verifying ebuild manifests
>>> Emerging (1 of 8) app-arch/bzip2-1.0.6-r8::gentoo
>>> Installing (1 of 8) app-arch/bzip2-1.0.6-r8::gentoo
>>> Emerging (2 of 8) app-portage/elt-patches-20170815::gentoo
>>> Installing (2 of 8) app-portage/elt-patches-20170815::gentoo
>>> Emerging (3 of 8) sys-libs/zlib-1.2.11-r1::gentoo
>>> Installing (3 of 8) sys-libs/zlib-1.2.11-r1::gentoo
>>> Emerging (4 of 8) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (4 of 8) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (5 of 8) dev-lang/python-3.4.5-r1::gentoo
>>> Installing (5 of 8) dev-lang/python-3.4.5-r1::gentoo
>>> Emerging (6 of 8) dev-libs/libxml2-2.9.4-r1::gentoo
>>> Installing (6 of 8) dev-libs/libxml2-2.9.4-r1::gentoo
>>> Emerging (7 of 8) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (7 of 8) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (8 of 8) sys-apps/portage-2.3.8::gentoo
>>> Installing (8 of 8) sys-apps/portage-2.3.8::gentoo
* Messages for package dev-lang/python-3.5.4-r1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
[ebuild U ] sys-apps/gentoo-functions-0.12 [0.10]
[ebuild U ] app-text/sgml-common-0.6.3-r6 [0.6.3-r5]
[ebuild U ] sys-devel/binutils-config-5-r4 [5-r3]
[ebuild U ] dev-libs/libffi-3.2.1 [3.0.13-r1]
[ebuild R ] sys-libs/cracklib-2.9.6-r1
[ebuild U ] sys-apps/file-5.32 [5.29]
[ebuild U ] dev-libs/mpc-1.0.2-r1 [1.0.1]
[ebuild U ] sys-apps/coreutils-8.26 [8.25]
[ebuild U ] app-admin/eselect-1.4.8 [1.4.5]
[ebuild R ] sys-kernel/linux-headers-4.4
[ebuild U ] dev-libs/openssl-1.0.2n [1.0.2k]
[ebuild U ] dev-libs/expat-2.2.1 [2.2.0-r1]
[ebuild U ] sys-devel/gettext-0.19.8.1 [0.19.7]
[ebuild NS ] sys-devel/gcc-5.4.0-r4 [4.9.4]
[ebuild U ] sys-libs/pam-1.2.1-r2 [1.2.1]
[ebuild U ] app-text/docbook-xsl-stylesheets-1.79.1-r2 [1.79.1-r1]
[ebuild U ] net-misc/rsync-3.1.2-r1 [3.1.2]
[ebuild U ] dev-python/setuptools-36.0.1 [30.4.0]
[ebuild R ] dev-python/certifi-2016.9.26
[ebuild R ] dev-python/pyxattr-0.5.5
[ebuild U ] app-admin/perl-cleaner-2.25 [2.20]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by dev-python/pyxattr-0.5.5::gentoo
# required by sys-apps/portage-2.3.8::gentoo[python_targets_python2_7,xattr]
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.22.3_rc4::gentoo
# required by sys-kernel/linux-headers-4.4::gentoo
# required by sys-apps/busybox-1.25.1::gentoo
# required by @system
# required by @world (argument)
=dev-python/setuptools-36.0.1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
* In order to avoid wasting time, backtracking has terminated early
* due to the above autounmask change(s). The --autounmask-backtrack=y
* option can be used to force further backtracking, but there is no
* guarantee that it will produce a solution.
!!! The following installed packages are masked:
- sys-devel/gcc-4.9.4::gentoo (masked by: package.mask)
/usr/portage/profiles/package.mask:
# Michał Górny <mgorny@gentoo.org>, Andreas K. Hüttel <dilfridge@gentoo.org>,
# Matthias Maier <tamiko@gentoo.org> (21 May 2017)
# These old versions of toolchain packages (binutils, gcc, glibc) are no
# longer officially supported and are not suitable for general use. Using
# these packages can result in build failures (and possible breakage) for
# many packages, and may leave your system vulnerable to known security
# exploits.
# If you still use one of these old toolchain packages, please upgrade (and
# switch the compiler / the binutils) ASAP. If you need them for a specific
# (isolated) use case, feel free to unmask them on your system.
# (updated 27 Dec 2017 with gcc < 5.4)
- sys-libs/glibc-2.23-r3::gentoo (masked by: package.mask)
- sys-devel/binutils-2.26.1::gentoo (masked by: package.mask)
For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180110T081028Z/.catalyst_lock'
Command exited with non-zero status 1
420.15user 76.83system 6:43.64elapsed 123%CPU (0avgtext+0avgdata 465088maxresident)k
0inputs+0outputs (549major+37537421minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180110T081028Z.Jju9gB/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-01-11 8:21 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-01-11 8:21 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 10426 bytes --]
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180111T081044Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180111T081044Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180111T081044Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180111T081044Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
The following packages are causing rebuilds:
(sys-libs/zlib-1.2.11-r1:0/1::gentoo, ebuild scheduled for merge) causes rebuilds for:
(dev-lang/python-3.4.5-r1:3.4/3.4m::gentoo, ebuild scheduled for merge)
(dev-libs/libxml2-2.9.4-r1:2/2::gentoo, ebuild scheduled for merge)
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
(app-arch/bzip2-1.0.6-r8:0/1::gentoo, ebuild scheduled for merge) causes rebuilds for:
(dev-lang/python-3.4.5-r1:3.4/3.4m::gentoo, ebuild scheduled for merge)
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
!!! The following installed packages are masked:
- sys-devel/gcc-4.9.4::gentoo (masked by: package.mask)
/usr/portage/profiles/package.mask:
# Michał Górny <mgorny@gentoo.org>, Andreas K. Hüttel <dilfridge@gentoo.org>,
# Matthias Maier <tamiko@gentoo.org> (21 May 2017)
# These old versions of toolchain packages (binutils, gcc, glibc) are no
# longer officially supported and are not suitable for general use. Using
# these packages can result in build failures (and possible breakage) for
# many packages, and may leave your system vulnerable to known security
# exploits.
# If you still use one of these old toolchain packages, please upgrade (and
# switch the compiler / the binutils) ASAP. If you need them for a specific
# (isolated) use case, feel free to unmask them on your system.
# (updated 27 Dec 2017 with gcc < 5.4)
- sys-libs/glibc-2.23-r3::gentoo (masked by: package.mask)
- sys-devel/binutils-2.26.1::gentoo (masked by: package.mask)
For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.
>>> Verifying ebuild manifests
>>> Emerging (1 of 8) app-arch/bzip2-1.0.6-r8::gentoo
>>> Installing (1 of 8) app-arch/bzip2-1.0.6-r8::gentoo
>>> Emerging (2 of 8) app-portage/elt-patches-20170815::gentoo
>>> Installing (2 of 8) app-portage/elt-patches-20170815::gentoo
>>> Emerging (3 of 8) sys-libs/zlib-1.2.11-r1::gentoo
>>> Installing (3 of 8) sys-libs/zlib-1.2.11-r1::gentoo
>>> Emerging (4 of 8) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (4 of 8) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (5 of 8) dev-libs/libxml2-2.9.4-r1::gentoo
>>> Installing (5 of 8) dev-libs/libxml2-2.9.4-r1::gentoo
>>> Emerging (6 of 8) dev-lang/python-3.4.5-r1::gentoo
>>> Installing (6 of 8) dev-lang/python-3.4.5-r1::gentoo
>>> Emerging (7 of 8) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (7 of 8) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (8 of 8) sys-apps/portage-2.3.8::gentoo
>>> Installing (8 of 8) sys-apps/portage-2.3.8::gentoo
* Messages for package dev-lang/python-3.5.4-r1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
[nomerge ] virtual/package-manager-0::gentoo
[nomerge ] sys-apps/portage-2.3.8::gentoo USE="(ipc) native-extensions xattr -build -doc -epydoc (-selinux)" PYTHON_TARGETS="python2_7 python3_5 (-pypy) -python3_4 -python3_6"
[nomerge ] dev-python/pyxattr-0.5.5::gentoo USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_5* (-pypy) -python3_4*"
[nomerge ] dev-python/setuptools-34.0.2-r1::gentoo [30.4.0::gentoo] USE="{-test}" PYTHON_TARGETS="python2_7 python3_5* (-pypy) (-pypy3) -python3_4* -python3_6"
[ebuild R ] dev-python/certifi-2016.9.26::gentoo PYTHON_TARGETS="python2_7 python3_5* (-pypy) (-pypy3) -python3_4* -python3_6" 0 KiB
[ebuild N ~] dev-python/packaging-16.8::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6" 44 KiB
[ebuild R ] dev-python/pyxattr-0.5.5::gentoo USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_5* (-pypy) -python3_4*" 0 KiB
[nomerge ] dev-python/packaging-16.8::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6"
[ebuild N ~] dev-python/six-1.11.0::gentoo USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6" 30 KiB
[ebuild U ] dev-python/setuptools-34.0.2-r1::gentoo [30.4.0::gentoo] USE="{-test}" PYTHON_TARGETS="python2_7 python3_5* (-pypy) (-pypy3) -python3_4* -python3_6" 604 KiB
Total: 5 packages (1 upgrade, 2 new, 2 reinstalls), Size of downloads: 677 KiB
* Error: circular dependencies:
(dev-python/setuptools-34.0.2-r1:0/0::gentoo, ebuild scheduled for merge) depends on
(dev-python/six-1.11.0:0/0::gentoo, ebuild scheduled for merge) (buildtime)
(dev-python/setuptools-34.0.2-r1:0/0::gentoo, ebuild scheduled for merge) (buildtime)
* Note that circular dependencies can often be avoided by temporarily
* disabling USE flags that trigger optional dependencies.
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/pyxattr-0.5.5::gentoo
# required by sys-apps/portage-2.3.8::gentoo[xattr,python_targets_python2_7]
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.22.3_rc4::gentoo
# required by sys-kernel/linux-headers-4.4::gentoo
# required by virtual/os-headers-0::gentoo
# required by sys-libs/glibc-2.25-r9::gentoo
# required by sys-devel/gcc-5.4.0-r4::gentoo
# required by @system
# required by @world (argument)
=dev-python/six-1.11.0 ~s390
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/pyxattr-0.5.5::gentoo
# required by sys-apps/portage-2.3.8::gentoo[xattr,python_targets_python2_7]
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.22.3_rc4::gentoo
# required by sys-kernel/linux-headers-4.4::gentoo
# required by virtual/os-headers-0::gentoo
# required by sys-libs/glibc-2.25-r9::gentoo
# required by sys-devel/gcc-5.4.0-r4::gentoo
# required by @system
# required by @world (argument)
=dev-python/packaging-16.8 ~s390
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/pyxattr-0.5.5::gentoo
# required by sys-apps/portage-2.3.8::gentoo[xattr,python_targets_python2_7]
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.22.3_rc4::gentoo
# required by sys-kernel/linux-headers-4.4::gentoo
# required by virtual/os-headers-0::gentoo
# required by sys-libs/glibc-2.25-r9::gentoo
# required by sys-devel/gcc-5.4.0-r4::gentoo
# required by @system
# required by @world (argument)
=dev-python/appdirs-1.4.3 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
* In order to avoid wasting time, backtracking has terminated early
* due to the above autounmask change(s). The --autounmask-backtrack=y
* option can be used to force further backtracking, but there is no
* guarantee that it will produce a solution.
!!! The following installed packages are masked:
- sys-devel/binutils-2.26.1::gentoo (masked by: package.mask)
/usr/portage/profiles/package.mask:
# Michał Górny <mgorny@gentoo.org>, Andreas K. Hüttel <dilfridge@gentoo.org>,
# Matthias Maier <tamiko@gentoo.org> (21 May 2017)
# These old versions of toolchain packages (binutils, gcc, glibc) are no
# longer officially supported and are not suitable for general use. Using
# these packages can result in build failures (and possible breakage) for
# many packages, and may leave your system vulnerable to known security
# exploits.
# If you still use one of these old toolchain packages, please upgrade (and
# switch the compiler / the binutils) ASAP. If you need them for a specific
# (isolated) use case, feel free to unmask them on your system.
# (updated 27 Dec 2017 with gcc < 5.4)
- sys-devel/gcc-4.9.4::gentoo (masked by: package.mask)
For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180111T081044Z/.catalyst_lock'
Command exited with non-zero status 1
420.79user 80.50system 7:21.03elapsed 113%CPU (0avgtext+0avgdata 465056maxresident)k
0inputs+0outputs (571major+37400833minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180111T081044Z.8Rss0u/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-01-12 8:20 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-01-12 8:20 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 10035 bytes --]
>>> Emerging (8 of 8) sys-apps/portage-2.3.8::gentoo
>>> Installing (8 of 8) sys-apps/portage-2.3.8::gentoo
* Messages for package dev-lang/python-3.5.4-r1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
The following packages are causing rebuilds:
(dev-lang/perl-5.24.3:0/5.24::gentoo, ebuild scheduled for merge) causes rebuilds for:
(dev-perl/Locale-gettext-1.70.0:0/0::gentoo, ebuild scheduled for merge)
(dev-perl/libintl-perl-1.200.0-r1:0/0::gentoo, ebuild scheduled for merge)
(virtual/perl-File-Temp-0.230.400-r5:0/0::gentoo, ebuild scheduled for merge)
(dev-perl/Unicode-EastAsianWidth-1.330.0-r1:0/0::gentoo, ebuild scheduled for merge)
(virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r2:0/0::gentoo, ebuild scheduled for merge)
(virtual/perl-File-Spec-3.630.100_rc-r2:0/0::gentoo, ebuild scheduled for merge)
(virtual/perl-File-Path-2.130.0:0/0::gentoo, ebuild scheduled for merge)
(sys-apps/texinfo-6.1:0/0::gentoo, ebuild scheduled for merge)
(perl-core/File-Path-2.130.0:0/0::gentoo, ebuild scheduled for merge)
(dev-perl/Text-Unidecode-0.40.0-r1:0/0::gentoo, ebuild scheduled for merge)
(virtual/perl-Test-Harness-3.360.100_rc-r2:0/0::gentoo, ebuild scheduled for merge)
(dev-perl/XML-Parser-2.440.0:0/0::gentoo, ebuild scheduled for merge)
(virtual/perl-Data-Dumper-2.160.0-r1:0/0::gentoo, ebuild scheduled for merge)
(perl-core/File-Temp-0.230.400-r1:0/0::gentoo, ebuild scheduled for merge)
[ebuild U ] sys-libs/glibc-2.25-r9 [2.23-r3]
[ebuild U ] sys-devel/gnuconfig-20170101 [20161104]
[ebuild U ] sys-apps/gentoo-functions-0.12 [0.10]
[ebuild U ] app-text/sgml-common-0.6.3-r6 [0.6.3-r5]
[ebuild U ] sys-devel/binutils-config-5-r4 [5-r3]
[ebuild U ] dev-libs/libffi-3.2.1 [3.0.13-r1]
[ebuild R ] sys-libs/cracklib-2.9.6-r1
[ebuild U ] sys-apps/file-5.32 [5.29]
[ebuild U ] dev-libs/mpc-1.0.3 [1.0.1]
[ebuild R ] sys-apps/kmod-23
[ebuild U ] app-text/docbook-xsl-stylesheets-1.79.1-r2 [1.79.1-r1]
[ebuild U ] sys-auth/pambase-20150213-r1 [20150213]
[ebuild rR ] virtual/perl-File-Temp-0.230.400-r5
[ebuild U ] app-admin/perl-cleaner-2.25 [2.20]
[ebuild rR ] sys-apps/attr-2.4.47-r2
[ebuild rR ] sys-apps/sed-4.2.2
[ebuild U ] dev-libs/openssl-1.0.2n [1.0.2k]
[ebuild rR ] net-misc/iputils-20151218
[ebuild R ] sys-kernel/linux-headers-4.4
[ebuild U ] sys-libs/libseccomp-2.3.2 [2.3.0]
[ebuild rR ] app-misc/pax-utils-1.1.7
[ebuild rR ] sys-apps/acl-2.2.52-r1
[ebuild U ] sys-apps/coreutils-8.26 [8.25]
[ebuild U ] app-admin/eselect-1.4.8 [1.4.5]
[ebuild rR ] sys-devel/binutils-2.26.1
[ebuild U ] sys-apps/util-linux-2.30.2 [2.26.2]
[ebuild rR ] sys-libs/db-4.8.30-r2
[ebuild r U ] dev-lang/perl-5.24.3 [5.22.3_rc4]
[ebuild N ] perl-core/File-Path-2.130.0
[ebuild N ] virtual/perl-File-Path-2.130.0
[ebuild rR ] dev-util/gtk-doc-am-1.25-r1
[ebuild rR ] dev-perl/Text-Unidecode-0.40.0-r1
[ebuild rR ] dev-perl/libintl-perl-1.200.0-r1
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r2 [7.40.200_rc]
[ebuild r U ] sys-apps/hwids-20170328 [20150717-r1]
[ebuild rR ] perl-core/File-Temp-0.230.400-r1
[ebuild U ] virtual/perl-File-Spec-3.630.100_rc-r2 [3.560.200_rc]
[ebuild U ] virtual/perl-Test-Harness-3.360.100_rc-r2 [3.350.100_rc]
[ebuild rR ] dev-perl/Unicode-EastAsianWidth-1.330.0-r1
[ebuild rR ] app-text/texi2html-5.0-r1
[ebuild NS ] sys-devel/autoconf-2.69-r4 [2.69]
[uninstall ] sys-devel/autoconf-2.69
[blocks b ] ~sys-devel/autoconf-2.69:2.5 ("~sys-devel/autoconf-2.69:2.5" is blocking sys-devel/autoconf-2.69-r4)
[ebuild U ] virtual/perl-Data-Dumper-2.160.0-r1 [2.154.0-r1]
[uninstall ] perl-core/Data-Dumper-2.154.0
[blocks b ] <perl-core/Data-Dumper-2.160.0 ("<perl-core/Data-Dumper-2.160.0" is blocking virtual/perl-Data-Dumper-2.160.0-r1)
[ebuild rR ] sys-devel/make-4.1-r1
[ebuild rR ] dev-libs/popt-1.16-r2
[ebuild U ] net-misc/rsync-3.1.2-r2 [3.1.2]
[ebuild rR ] sys-libs/e2fsprogs-libs-1.43.3
[ebuild rR ] app-arch/tar-1.29-r1
[ebuild N ] dev-libs/elfutils-0.170-r1
[ebuild N ] virtual/libelf-1
[ebuild U ] sys-devel/automake-1.15.1-r1 [1.15]
[ebuild rR ] sys-devel/libtool-2.4.6-r3
[ebuild rR ] dev-libs/libxml2-2.9.4-r1
[ebuild U ] dev-libs/expat-2.2.1 [2.2.0-r1]
[ebuild rR ] sys-apps/groff-1.22.2
[ebuild rR ] dev-libs/iniparser-3.1-r1
[ebuild r U ] net-misc/openssh-7.5_p1-r3 [7.3_p1-r7]
[ebuild U ] sys-devel/gettext-0.19.8.1 [0.19.7]
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild rR ] dev-perl/XML-Parser-2.440.0
[ebuild rR ] sys-apps/shadow-4.4-r2
[ebuild rR ] sys-process/psmisc-22.21-r3
[ebuild U ] app-misc/ca-certificates-20161130.3.30.2 [20161102.3.27.2-r2]
[ebuild rR ] sys-apps/findutils-4.6.0-r1
[ebuild rR ] sys-apps/diffutils-3.3
[ebuild r U ] net-misc/wget-1.19.1-r2 [1.19.1-r1]
[ebuild r U ] sys-apps/grep-3.0 [2.25]
[ebuild rR ] sys-apps/gawk-4.1.3
[ebuild rR ] sys-devel/flex-2.6.1
[ebuild U ] dev-util/intltool-0.51.0-r2 [0.50.2-r1]
[ebuild N ] dev-python/six-1.10.0
[ebuild rR ] dev-libs/libgpg-error-1.27-r1
[ebuild rR ] sys-apps/texinfo-6.1
[ebuild U ] dev-perl/Locale-gettext-1.70.0 [1.50.0-r1]
[ebuild N ] dev-python/appdirs-1.4.3
[ebuild N ] dev-python/pyparsing-2.2.0
[ebuild rR ] dev-util/indent-2.2.11-r1
[ebuild r U ] app-editors/nano-2.8.7 [2.6.3]
[ebuild rR ] sys-apps/man-1.6g
[ebuild U ] sys-libs/pam-1.2.1-r2 [1.2.1]
[ebuild rR ] sys-fs/e2fsprogs-1.43.3-r1
[ebuild rR ] sys-devel/bison-3.0.4-r1
[ebuild r U ] dev-libs/libgcrypt-1.8.2 [1.7.6]
[ebuild rR ] sys-apps/help2man-1.46.6
[ebuild N ] dev-python/packaging-16.8
[ebuild NS ] sys-devel/gcc-5.4.0-r4 [4.9.4]
[ebuild rR ] sys-devel/gcc-4.9.4
[ebuild rR ] sys-apps/iproute2-4.4.0
[ebuild rR ] dev-libs/libxslt-1.1.29-r1
[ebuild rR ] sys-fs/udev-225-r1
[ebuild rR ] dev-libs/glib-2.50.3-r1
[ebuild rR ] x11-misc/shared-mime-info-1.4
[ebuild U ] dev-python/setuptools-34.0.2-r1 [30.4.0]
[ebuild U ] dev-python/certifi-2017.4.17 [2016.9.26]
[ebuild R ] dev-python/pyxattr-0.5.5
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by @__auto_rebuild__ (argument)
=dev-libs/libgcrypt-1.8.2 ~s390
# required by virtual/libelf-1::gentoo
# required by sys-apps/iproute2-4.4.0::gentoo
# required by @__auto_rebuild__ (argument)
=dev-libs/elfutils-0.170-r1 ~s390
The following mask changes are necessary to proceed:
(see "package.unmask" in the portage(5) man page for more details)
# required by @__auto_rebuild__ (argument)
# /usr/portage/profiles/package.mask:
# Michał Górny <mgorny@gentoo.org>, Andreas K. Hüttel <dilfridge@gentoo.org>,
# Matthias Maier <tamiko@gentoo.org> (21 May 2017)
# These old versions of toolchain packages (binutils, gcc, glibc) are no
# longer officially supported and are not suitable for general use. Using
# these packages can result in build failures (and possible breakage) for
# many packages, and may leave your system vulnerable to known security
# exploits.
# If you still use one of these old toolchain packages, please upgrade (and
# switch the compiler / the binutils) ASAP. If you need them for a specific
# (isolated) use case, feel free to unmask them on your system.
# (updated 27 Dec 2017 with gcc < 5.4)
=sys-devel/binutils-2.26.1
# required by @__auto_rebuild__ (argument)
# /usr/portage/profiles/package.mask:
# Michał Górny <mgorny@gentoo.org>, Andreas K. Hüttel <dilfridge@gentoo.org>,
# Matthias Maier <tamiko@gentoo.org> (21 May 2017)
# These old versions of toolchain packages (binutils, gcc, glibc) are no
# longer officially supported and are not suitable for general use. Using
# these packages can result in build failures (and possible breakage) for
# many packages, and may leave your system vulnerable to known security
# exploits.
# If you still use one of these old toolchain packages, please upgrade (and
# switch the compiler / the binutils) ASAP. If you need them for a specific
# (isolated) use case, feel free to unmask them on your system.
# (updated 27 Dec 2017 with gcc < 5.4)
=sys-devel/gcc-4.9.4
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180112T081040Z/.catalyst_lock'
Command exited with non-zero status 1
422.58user 78.89system 7:00.06elapsed 119%CPU (0avgtext+0avgdata 465072maxresident)k
0inputs+0outputs (559major+37343057minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180112T081040Z.8OLbJv/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-01-13 8:20 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-01-13 8:20 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 10045 bytes --]
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
The following packages are causing rebuilds:
(dev-lang/perl-5.24.3:0/5.24::gentoo, ebuild scheduled for merge) causes rebuilds for:
(dev-perl/libintl-perl-1.200.0-r1:0/0::gentoo, ebuild scheduled for merge)
(dev-perl/Locale-gettext-1.70.0:0/0::gentoo, ebuild scheduled for merge)
(dev-perl/XML-Parser-2.440.0:0/0::gentoo, ebuild scheduled for merge)
(dev-perl/Text-Unidecode-0.40.0-r1:0/0::gentoo, ebuild scheduled for merge)
(virtual/perl-File-Path-2.130.0:0/0::gentoo, ebuild scheduled for merge)
(virtual/perl-Test-Harness-3.360.100_rc-r2:0/0::gentoo, ebuild scheduled for merge)
(perl-core/File-Temp-0.230.400-r1:0/0::gentoo, ebuild scheduled for merge)
(sys-apps/texinfo-6.1:0/0::gentoo, ebuild scheduled for merge)
(virtual/perl-File-Temp-0.230.400-r5:0/0::gentoo, ebuild scheduled for merge)
(virtual/perl-Data-Dumper-2.160.0-r1:0/0::gentoo, ebuild scheduled for merge)
(perl-core/File-Path-2.130.0:0/0::gentoo, ebuild scheduled for merge)
(dev-perl/Unicode-EastAsianWidth-1.330.0-r1:0/0::gentoo, ebuild scheduled for merge)
(virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r2:0/0::gentoo, ebuild scheduled for merge)
(virtual/perl-File-Spec-3.630.100_rc-r2:0/0::gentoo, ebuild scheduled for merge)
[ebuild U ] sys-libs/glibc-2.25-r9 [2.23-r3]
[ebuild U ] sys-devel/gnuconfig-20170101 [20161104]
[ebuild U ] sys-apps/gentoo-functions-0.12 [0.10]
[ebuild U ] app-text/sgml-common-0.6.3-r6 [0.6.3-r5]
[ebuild U ] sys-devel/binutils-config-5-r4 [5-r3]
[ebuild U ] dev-libs/libffi-3.2.1 [3.0.13-r1]
[ebuild U ] sys-apps/file-5.32 [5.29]
[ebuild R ] sys-libs/cracklib-2.9.6-r1
[ebuild U ] dev-libs/mpc-1.0.3 [1.0.1]
[ebuild R ] sys-apps/kmod-23
[ebuild U ] app-text/docbook-xsl-stylesheets-1.79.1-r2 [1.79.1-r1]
[ebuild U ] sys-auth/pambase-20150213-r1 [20150213]
[ebuild U ] virtual/udev-217 [215]
[ebuild rR ] virtual/perl-File-Temp-0.230.400-r5
[ebuild U ] app-admin/perl-cleaner-2.25 [2.20]
[ebuild rR ] sys-apps/attr-2.4.47-r2
[ebuild rR ] sys-apps/sed-4.2.2
[ebuild U ] dev-libs/openssl-1.0.2n [1.0.2k]
[ebuild rR ] net-misc/iputils-20151218
[ebuild R ] sys-kernel/linux-headers-4.4
[ebuild U ] sys-libs/libseccomp-2.3.2 [2.3.0]
[ebuild rR ] app-misc/pax-utils-1.1.7
[ebuild U ] sys-apps/sandbox-2.10-r4 [2.10-r3]
[ebuild rR ] sys-devel/binutils-2.26.1
[ebuild rR ] sys-apps/acl-2.2.52-r1
[ebuild U ] sys-apps/coreutils-8.26 [8.25]
[ebuild U ] app-admin/eselect-1.4.8 [1.4.5]
[ebuild U ] sys-apps/util-linux-2.30.2 [2.26.2]
[ebuild rR ] sys-libs/db-4.8.30-r2
[ebuild r U ] dev-lang/perl-5.24.3 [5.22.3_rc4]
[ebuild N ] perl-core/File-Path-2.130.0
[ebuild N ] virtual/perl-File-Path-2.130.0
[ebuild rR ] dev-util/gtk-doc-am-1.25-r1
[ebuild rR ] dev-perl/Text-Unidecode-0.40.0-r1
[ebuild rR ] dev-perl/libintl-perl-1.200.0-r1
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r2 [7.40.200_rc]
[ebuild r U ] sys-apps/hwids-20170328 [20150717-r1]
[ebuild rR ] perl-core/File-Temp-0.230.400-r1
[ebuild U ] virtual/perl-File-Spec-3.630.100_rc-r2 [3.560.200_rc]
[ebuild U ] virtual/perl-Test-Harness-3.360.100_rc-r2 [3.350.100_rc]
[ebuild rR ] dev-perl/Unicode-EastAsianWidth-1.330.0-r1
[ebuild rR ] app-text/texi2html-5.0-r1
[ebuild NS ] sys-devel/autoconf-2.69-r4 [2.69]
[uninstall ] sys-devel/autoconf-2.69
[blocks b ] ~sys-devel/autoconf-2.69:2.5 ("~sys-devel/autoconf-2.69:2.5" is blocking sys-devel/autoconf-2.69-r4)
[ebuild U ] virtual/perl-Data-Dumper-2.160.0-r1 [2.154.0-r1]
[uninstall ] perl-core/Data-Dumper-2.154.0
[blocks b ] <perl-core/Data-Dumper-2.160.0 ("<perl-core/Data-Dumper-2.160.0" is blocking virtual/perl-Data-Dumper-2.160.0-r1)
[ebuild rR ] sys-devel/make-4.1-r1
[ebuild rR ] sys-libs/e2fsprogs-libs-1.43.3
[ebuild rR ] dev-libs/popt-1.16-r2
[ebuild U ] net-misc/rsync-3.1.2-r2 [3.1.2]
[ebuild rR ] app-arch/tar-1.29-r1
[ebuild N ] dev-libs/elfutils-0.170-r1
[ebuild N ] virtual/libelf-3
[ebuild U ] sys-devel/automake-1.15.1-r1 [1.15]
[ebuild rR ] sys-devel/libtool-2.4.6-r3
[ebuild rR ] dev-libs/libxml2-2.9.4-r1
[ebuild U ] dev-libs/expat-2.2.1 [2.2.0-r1]
[ebuild rR ] sys-apps/groff-1.22.2
[ebuild rR ] dev-libs/iniparser-3.1-r1
[ebuild r U ] net-misc/openssh-7.5_p1-r3 [7.3_p1-r7]
[ebuild U ] sys-devel/gettext-0.19.8.1 [0.19.7]
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild rR ] dev-perl/XML-Parser-2.440.0
[ebuild rR ] sys-apps/shadow-4.4-r2
[ebuild rR ] sys-process/psmisc-22.21-r3
[ebuild U ] app-misc/ca-certificates-20161130.3.30.2 [20161102.3.27.2-r2]
[ebuild rR ] sys-apps/gawk-4.1.3
[ebuild rR ] sys-apps/diffutils-3.3
[ebuild rR ] sys-apps/findutils-4.6.0-r1
[ebuild r U ] net-misc/wget-1.19.1-r2 [1.19.1-r1]
[ebuild r U ] sys-apps/grep-3.0 [2.25]
[ebuild rR ] sys-devel/flex-2.6.1
[ebuild U ] dev-util/intltool-0.51.0-r2 [0.50.2-r1]
[ebuild N ] dev-python/six-1.10.0
[ebuild rR ] dev-libs/libgpg-error-1.27-r1
[ebuild rR ] sys-apps/texinfo-6.1
[ebuild U ] dev-perl/Locale-gettext-1.70.0 [1.50.0-r1]
[ebuild N ] dev-python/appdirs-1.4.3
[ebuild N ] dev-python/pyparsing-2.2.0
[ebuild r U ] app-editors/nano-2.8.7 [2.6.3]
[ebuild rR ] sys-apps/man-1.6g
[ebuild rR ] dev-util/indent-2.2.11-r1
[ebuild U ] sys-libs/pam-1.2.1-r2 [1.2.1]
[ebuild rR ] sys-fs/e2fsprogs-1.43.3-r1
[ebuild rR ] sys-devel/bison-3.0.4-r1
[ebuild rR ] sys-apps/help2man-1.46.6
[ebuild U ] dev-libs/libgcrypt-1.8.1 [1.7.6]
[ebuild N ] dev-python/packaging-16.8
[ebuild NS ] sys-devel/gcc-5.4.0-r4 [4.9.4]
[ebuild rR ] sys-devel/gcc-4.9.4
[ebuild rR ] sys-apps/iproute2-4.4.0
[ebuild rR ] dev-libs/libxslt-1.1.29-r1
[ebuild r U ] sys-fs/udev-233 [225-r1]
[ebuild rR ] dev-libs/glib-2.50.3-r1
[ebuild rR ] x11-misc/shared-mime-info-1.4
[ebuild U ] dev-python/setuptools-34.0.2-r1 [30.4.0]
[ebuild U ] dev-python/certifi-2017.4.17 [2016.9.26]
[ebuild R ] dev-python/pyxattr-0.5.5
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/iproute2-4.4.0::gentoo
# required by @__auto_rebuild__ (argument)
=virtual/libelf-3 ~s390
The following mask changes are necessary to proceed:
(see "package.unmask" in the portage(5) man page for more details)
# required by @__auto_rebuild__ (argument)
# /usr/portage/profiles/package.mask:
# Michał Górny <mgorny@gentoo.org>, Andreas K. Hüttel <dilfridge@gentoo.org>,
# Matthias Maier <tamiko@gentoo.org> (21 May 2017)
# These old versions of toolchain packages (binutils, gcc, glibc) are no
# longer officially supported and are not suitable for general use. Using
# these packages can result in build failures (and possible breakage) for
# many packages, and may leave your system vulnerable to known security
# exploits.
# If you still use one of these old toolchain packages, please upgrade (and
# switch the compiler / the binutils) ASAP. If you need them for a specific
# (isolated) use case, feel free to unmask them on your system.
# (updated 27 Dec 2017 with gcc < 5.4)
=sys-devel/gcc-4.9.4
# required by @__auto_rebuild__ (argument)
# /usr/portage/profiles/package.mask:
# Michał Górny <mgorny@gentoo.org>, Andreas K. Hüttel <dilfridge@gentoo.org>,
# Matthias Maier <tamiko@gentoo.org> (21 May 2017)
# These old versions of toolchain packages (binutils, gcc, glibc) are no
# longer officially supported and are not suitable for general use. Using
# these packages can result in build failures (and possible breakage) for
# many packages, and may leave your system vulnerable to known security
# exploits.
# If you still use one of these old toolchain packages, please upgrade (and
# switch the compiler / the binutils) ASAP. If you need them for a specific
# (isolated) use case, feel free to unmask them on your system.
# (updated 27 Dec 2017 with gcc < 5.4)
=sys-devel/binutils-2.26.1
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
* In order to avoid wasting time, backtracking has terminated early
* due to the above autounmask change(s). The --autounmask-backtrack=y
* option can be used to force further backtracking, but there is no
* guarantee that it will produce a solution.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180113T081021Z/.catalyst_lock'
Command exited with non-zero status 1
423.18user 79.85system 6:51.09elapsed 122%CPU (0avgtext+0avgdata 464208maxresident)k
0inputs+0outputs (742major+37449684minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180113T081021Z.fl1UUC/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-01-14 8:20 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-01-14 8:20 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 10546 bytes --]
(Could take a couple of minutes if you have a lot of binary packages.)
The following packages are causing rebuilds:
(sys-libs/zlib-1.2.11-r1:0/1::gentoo, ebuild scheduled for merge) causes rebuilds for:
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.4.5-r1:3.4/3.4m::gentoo, ebuild scheduled for merge)
(dev-libs/libxml2-2.9.4-r1:2/2::gentoo, ebuild scheduled for merge)
(app-arch/bzip2-1.0.6-r8:0/1::gentoo, ebuild scheduled for merge) causes rebuilds for:
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.4.5-r1:3.4/3.4m::gentoo, ebuild scheduled for merge)
!!! The following installed packages are masked:
- sys-libs/glibc-2.23-r3::gentoo (masked by: package.mask)
/usr/portage/profiles/package.mask:
# Michał Górny <mgorny@gentoo.org>, Andreas K. Hüttel <dilfridge@gentoo.org>,
# Matthias Maier <tamiko@gentoo.org> (21 May 2017)
# These old versions of toolchain packages (binutils, gcc, glibc) are no
# longer officially supported and are not suitable for general use. Using
# these packages can result in build failures (and possible breakage) for
# many packages, and may leave your system vulnerable to known security
# exploits.
# If you still use one of these old toolchain packages, please upgrade (and
# switch the compiler / the binutils) ASAP. If you need them for a specific
# (isolated) use case, feel free to unmask them on your system.
# (updated 27 Dec 2017 with gcc < 5.4)
- sys-devel/binutils-2.26.1::gentoo (masked by: package.mask)
- sys-devel/gcc-4.9.4::gentoo (masked by: package.mask)
For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.
>>> Verifying ebuild manifests
>>> Emerging (1 of 8) app-arch/bzip2-1.0.6-r8::gentoo
>>> Installing (1 of 8) app-arch/bzip2-1.0.6-r8::gentoo
>>> Emerging (2 of 8) app-portage/elt-patches-20170815::gentoo
>>> Installing (2 of 8) app-portage/elt-patches-20170815::gentoo
>>> Emerging (3 of 8) sys-libs/zlib-1.2.11-r1::gentoo
>>> Installing (3 of 8) sys-libs/zlib-1.2.11-r1::gentoo
>>> Emerging (4 of 8) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (4 of 8) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (5 of 8) dev-lang/python-3.4.5-r1::gentoo
>>> Installing (5 of 8) dev-lang/python-3.4.5-r1::gentoo
>>> Emerging (6 of 8) dev-libs/libxml2-2.9.4-r1::gentoo
>>> Installing (6 of 8) dev-libs/libxml2-2.9.4-r1::gentoo
>>> Emerging (7 of 8) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (7 of 8) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (8 of 8) sys-apps/portage-2.3.8::gentoo
>>> Installing (8 of 8) sys-apps/portage-2.3.8::gentoo
* Messages for package dev-lang/python-3.5.4-r1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
[ebuild U ] sys-libs/glibc-2.25-r9 [2.23-r3]
[ebuild U ] sys-devel/gnuconfig-20170101 [20161104]
[ebuild U ] sys-apps/gentoo-functions-0.12 [0.10]
[ebuild U ] app-text/sgml-common-0.6.3-r6 [0.6.3-r5]
[ebuild U ] sys-devel/binutils-config-5-r4 [5-r3]
[ebuild U ] dev-libs/gmp-6.1.2 [6.1.0]
[ebuild U ] dev-libs/libffi-3.2.1 [3.0.13-r1]
[ebuild U ] dev-libs/mpfr-3.1.6 [3.1.3_p4]
[ebuild R ] sys-libs/cracklib-2.9.6-r1
[ebuild U ] sys-apps/file-5.32 [5.29]
[ebuild U ] dev-libs/mpc-1.0.3 [1.0.1]
[ebuild U ] sys-apps/coreutils-8.26 [8.25]
[ebuild U ] app-admin/eselect-1.4.8 [1.4.5]
[ebuild U ] dev-lang/perl-5.24.3 [5.22.3_rc4]
[ebuild U ] virtual/perl-Test-Harness-3.360.100_rc-r2 [3.350.100_rc]
[ebuild R ] sys-kernel/linux-headers-4.4
[ebuild U ] sys-libs/libseccomp-2.3.2 [2.3.0]
[ebuild U ] sys-apps/sandbox-2.10-r4 [2.10-r3]
[ebuild N ] perl-core/File-Path-2.130.0
[ebuild N ] virtual/perl-File-Path-2.130.0
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r2 [7.40.200_rc]
[ebuild U ] dev-libs/openssl-1.0.2n [1.0.2k]
[ebuild NS ] sys-devel/autoconf-2.69-r4 [2.69]
[uninstall ] sys-devel/autoconf-2.69
[blocks b ] ~sys-devel/autoconf-2.69:2.5 ("~sys-devel/autoconf-2.69:2.5" is blocking sys-devel/autoconf-2.69-r4)
[ebuild U ] virtual/perl-Data-Dumper-2.160.0-r1 [2.154.0-r1]
[uninstall ] perl-core/Data-Dumper-2.154.0
[blocks b ] <perl-core/Data-Dumper-2.160.0 ("<perl-core/Data-Dumper-2.160.0" is blocking virtual/perl-Data-Dumper-2.160.0-r1)
[ebuild U ] sys-auth/pambase-20150213-r1 [20150213]
[ebuild U ] net-misc/rsync-3.1.2-r2 [3.1.2]
[ebuild U ] app-misc/ca-certificates-20161130.3.30.2 [20161102.3.27.2-r2]
[ebuild N ] dev-python/six-1.10.0
[ebuild N ] dev-python/appdirs-1.4.3
[ebuild N ] dev-python/pyparsing-2.2.0
[ebuild N ] dev-python/packaging-16.8
[ebuild U ] dev-python/setuptools-34.0.2-r1 [30.4.0]
[ebuild U ] dev-python/certifi-2017.4.17 [2016.9.26]
[ebuild R ] dev-python/pyxattr-0.5.5
[ebuild U ] app-admin/perl-cleaner-2.25 [2.20]
[ebuild U ] app-text/docbook-xsl-stylesheets-1.79.1-r2 [1.79.1-r1]
[ebuild U ] sys-devel/automake-1.15.1-r1 [1.15]
[ebuild U ] dev-libs/expat-2.2.1 [2.2.0-r1]
[ebuild U ] dev-libs/libgcrypt-1.8.1 [1.7.6]
[ebuild U ] sys-devel/gettext-0.19.8.1 [0.19.7]
[ebuild U ] sys-libs/pam-1.2.1-r2 [1.2.1]
[ebuild NS ] sys-devel/gcc-5.4.0-r4 [4.9.4]
[ebuild U ] dev-util/intltool-0.51.0-r2 [0.50.2-r1]
[ebuild U ] dev-perl/Locale-gettext-1.70.0 [1.50.0-r1]
[ebuild U ] sys-apps/util-linux-2.30.2 [2.26.2]
[blocks B ] <sys-apps/s390-tools-1.36.1-r1 ("<sys-apps/s390-tools-1.36.1-r1" is blocking sys-apps/util-linux-2.30.2)
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
dev-lang/perl:0
(dev-lang/perl-5.24.3:0/5.24::gentoo, ebuild scheduled for merge) pulled in by
=dev-lang/perl-5.24.3* required by (virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r2:0/0::gentoo, ebuild scheduled for merge)
^ ^^^^^^^
(and 2 more with the same problem)
(dev-lang/perl-5.22.3_rc4:0/5.22::gentoo, installed) pulled in by
=dev-lang/perl-5.22.3* required by (virtual/perl-File-Spec-3.560.200_rc:0/0::gentoo, installed)
^ ^^^^^^^
dev-lang/perl:0/5.22=[-build(-)] required by (perl-core/File-Temp-0.230.400-r1:0/0::gentoo, installed)
^^^^^^^^
dev-lang/perl:0/5.22= required by (virtual/perl-File-Spec-3.560.200_rc:0/0::gentoo, installed)
^^^^^^^^
(and 6 more with the same problems)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
!!! The slot conflict(s) shown above involve package(s) which may need to
!!! be rebuilt in order to solve the conflict(s). However, the following
!!! package(s) cannot be rebuilt for the reason(s) shown:
(virtual/perl-File-Spec-3.560.200_rc:0/0::gentoo, installed): ebuild is masked or unavailable
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
(sys-apps/util-linux-2.30.2:0/0::gentoo, ebuild scheduled for merge) pulled in by
sys-apps/util-linux required by (app-text/build-docbook-catalog-1.19.1:0/0::gentoo, installed)
sys-apps/util-linux required by @system
>=sys-apps/util-linux-2.16 required by (sys-fs/e2fsprogs-1.43.3-r1:0/0::gentoo, installed)
>=sys-apps/util-linux-2.24 required by (sys-fs/udev-225-r1:0/0::gentoo, installed)
sys-apps/util-linux[abi_x86_32(-)?,abi_x86_64(-)?,abi_x86_x32(-)?,abi_mips_n32(-)?,abi_mips_n64(-)?,abi_mips_o32(-)?,abi_ppc_32(-)?,abi_ppc_64(-)?,abi_s390_32(-)?,abi_s390_64(-)?] (sys-apps/util-linux[abi_s390_32(-)]) required by (dev-libs/glib-2.50.3-r1:2/2::gentoo, installed)
(sys-apps/s390-tools-1.23.1:0/0::gentoo, installed) pulled in by
sys-apps/s390-tools required by @system
!!! The following installed packages are masked:
- sys-devel/gcc-4.9.4::gentoo (masked by: package.mask)
/usr/portage/profiles/package.mask:
# Michał Górny <mgorny@gentoo.org>, Andreas K. Hüttel <dilfridge@gentoo.org>,
# Matthias Maier <tamiko@gentoo.org> (21 May 2017)
# These old versions of toolchain packages (binutils, gcc, glibc) are no
# longer officially supported and are not suitable for general use. Using
# these packages can result in build failures (and possible breakage) for
# many packages, and may leave your system vulnerable to known security
# exploits.
# If you still use one of these old toolchain packages, please upgrade (and
# switch the compiler / the binutils) ASAP. If you need them for a specific
# (isolated) use case, feel free to unmask them on your system.
# (updated 27 Dec 2017 with gcc < 5.4)
- sys-devel/binutils-2.26.1::gentoo (masked by: package.mask)
For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180114T081040Z/.catalyst_lock'
Command exited with non-zero status 1
421.89user 77.73system 6:47.62elapsed 122%CPU (0avgtext+0avgdata 465408maxresident)k
0inputs+0outputs (567major+37520194minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180114T081040Z.rL07z5/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-01-14 9:18 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-01-14 9:18 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 10534 bytes --]
(Could take a couple of minutes if you have a lot of binary packages.)
The following packages are causing rebuilds:
(app-arch/bzip2-1.0.6-r8:0/1::gentoo, ebuild scheduled for merge) causes rebuilds for:
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.4.5-r1:3.4/3.4m::gentoo, ebuild scheduled for merge)
(sys-libs/zlib-1.2.11-r1:0/1::gentoo, ebuild scheduled for merge) causes rebuilds for:
(dev-libs/libxml2-2.9.4-r1:2/2::gentoo, ebuild scheduled for merge)
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.4.5-r1:3.4/3.4m::gentoo, ebuild scheduled for merge)
!!! The following installed packages are masked:
- sys-devel/gcc-4.9.4::gentoo (masked by: package.mask)
/usr/portage/profiles/package.mask:
# Michał Górny <mgorny@gentoo.org>, Andreas K. Hüttel <dilfridge@gentoo.org>,
# Matthias Maier <tamiko@gentoo.org> (21 May 2017)
# These old versions of toolchain packages (binutils, gcc, glibc) are no
# longer officially supported and are not suitable for general use. Using
# these packages can result in build failures (and possible breakage) for
# many packages, and may leave your system vulnerable to known security
# exploits.
# If you still use one of these old toolchain packages, please upgrade (and
# switch the compiler / the binutils) ASAP. If you need them for a specific
# (isolated) use case, feel free to unmask them on your system.
# (updated 27 Dec 2017 with gcc < 5.4)
- sys-libs/glibc-2.23-r3::gentoo (masked by: package.mask)
- sys-devel/binutils-2.26.1::gentoo (masked by: package.mask)
For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.
>>> Verifying ebuild manifests
>>> Emerging (1 of 8) app-arch/bzip2-1.0.6-r8::gentoo
>>> Installing (1 of 8) app-arch/bzip2-1.0.6-r8::gentoo
>>> Emerging (2 of 8) app-portage/elt-patches-20170815::gentoo
>>> Installing (2 of 8) app-portage/elt-patches-20170815::gentoo
>>> Emerging (3 of 8) sys-libs/zlib-1.2.11-r1::gentoo
>>> Installing (3 of 8) sys-libs/zlib-1.2.11-r1::gentoo
>>> Emerging (4 of 8) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (4 of 8) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (5 of 8) dev-libs/libxml2-2.9.4-r1::gentoo
>>> Installing (5 of 8) dev-libs/libxml2-2.9.4-r1::gentoo
>>> Emerging (6 of 8) dev-lang/python-3.4.5-r1::gentoo
>>> Installing (6 of 8) dev-lang/python-3.4.5-r1::gentoo
>>> Emerging (7 of 8) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (7 of 8) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (8 of 8) sys-apps/portage-2.3.8::gentoo
>>> Installing (8 of 8) sys-apps/portage-2.3.8::gentoo
* Messages for package dev-lang/python-3.5.4-r1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
[ebuild U ] sys-libs/glibc-2.25-r9 [2.23-r3]
[ebuild U ] sys-devel/gnuconfig-20170101 [20161104]
[ebuild U ] sys-apps/gentoo-functions-0.12 [0.10]
[ebuild U ] app-text/sgml-common-0.6.3-r6 [0.6.3-r5]
[ebuild U ] sys-devel/binutils-config-5-r4 [5-r3]
[ebuild U ] dev-libs/gmp-6.1.2 [6.1.0]
[ebuild U ] dev-libs/libffi-3.2.1 [3.0.13-r1]
[ebuild U ] dev-libs/mpfr-3.1.6 [3.1.3_p4]
[ebuild R ] sys-libs/cracklib-2.9.6-r1
[ebuild U ] sys-apps/file-5.32 [5.29]
[ebuild U ] dev-libs/mpc-1.0.3 [1.0.1]
[ebuild U ] sys-apps/coreutils-8.26 [8.25]
[ebuild U ] app-admin/eselect-1.4.8 [1.4.5]
[ebuild U ] dev-lang/perl-5.24.3 [5.22.3_rc4]
[ebuild U ] virtual/perl-Test-Harness-3.360.100_rc-r2 [3.350.100_rc]
[ebuild R ] sys-kernel/linux-headers-4.4
[ebuild U ] sys-libs/libseccomp-2.3.2 [2.3.0]
[ebuild U ] sys-apps/sandbox-2.10-r4 [2.10-r3]
[ebuild N ] perl-core/File-Path-2.130.0
[ebuild N ] virtual/perl-File-Path-2.130.0
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r2 [7.40.200_rc]
[ebuild U ] dev-libs/openssl-1.0.2n [1.0.2k]
[ebuild NS ] sys-devel/autoconf-2.69-r4 [2.69]
[uninstall ] sys-devel/autoconf-2.69
[blocks b ] ~sys-devel/autoconf-2.69:2.5 ("~sys-devel/autoconf-2.69:2.5" is blocking sys-devel/autoconf-2.69-r4)
[ebuild U ] virtual/perl-Data-Dumper-2.160.0-r1 [2.154.0-r1]
[uninstall ] perl-core/Data-Dumper-2.154.0
[blocks b ] <perl-core/Data-Dumper-2.160.0 ("<perl-core/Data-Dumper-2.160.0" is blocking virtual/perl-Data-Dumper-2.160.0-r1)
[ebuild U ] sys-auth/pambase-20150213-r1 [20150213]
[ebuild U ] net-misc/rsync-3.1.2-r2 [3.1.2]
[ebuild U ] app-misc/ca-certificates-20161130.3.30.2 [20161102.3.27.2-r2]
[ebuild N ] dev-python/six-1.10.0
[ebuild N ] dev-python/appdirs-1.4.3
[ebuild N ] dev-python/pyparsing-2.2.0
[ebuild N ] dev-python/packaging-16.8
[ebuild U ] dev-python/setuptools-34.0.2-r1 [30.4.0]
[ebuild U ] dev-python/certifi-2017.4.17 [2016.9.26]
[ebuild R ] dev-python/pyxattr-0.5.5
[ebuild U ] app-admin/perl-cleaner-2.25 [2.20]
[ebuild U ] app-text/docbook-xsl-stylesheets-1.79.1-r2 [1.79.1-r1]
[ebuild U ] sys-devel/automake-1.15.1-r1 [1.15]
[ebuild U ] dev-libs/expat-2.2.1 [2.2.0-r1]
[ebuild U ] dev-libs/libgcrypt-1.8.1 [1.7.6]
[ebuild U ] sys-devel/gettext-0.19.8.1 [0.19.7]
[ebuild U ] sys-libs/pam-1.2.1-r2 [1.2.1]
[ebuild NS ] sys-devel/gcc-5.4.0-r4 [4.9.4]
[ebuild U ] dev-util/intltool-0.51.0-r2 [0.50.2-r1]
[ebuild U ] dev-perl/Locale-gettext-1.70.0 [1.50.0-r1]
[ebuild U ] sys-apps/util-linux-2.30.2 [2.26.2]
[blocks B ] <sys-apps/s390-tools-1.36.1-r1 ("<sys-apps/s390-tools-1.36.1-r1" is blocking sys-apps/util-linux-2.30.2)
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
dev-lang/perl:0
(dev-lang/perl-5.24.3:0/5.24::gentoo, ebuild scheduled for merge) pulled in by
=dev-lang/perl-5.24.3* required by (virtual/perl-Test-Harness-3.360.100_rc-r2:0/0::gentoo, ebuild scheduled for merge)
^ ^^^^^^^
(and 2 more with the same problem)
(dev-lang/perl-5.22.3_rc4:0/5.22::gentoo, installed) pulled in by
dev-lang/perl:0/5.22=[-build(-)] required by (perl-core/File-Temp-0.230.400-r1:0/0::gentoo, installed)
^^^^^^^^
=dev-lang/perl-5.22.3* required by (virtual/perl-File-Spec-3.560.200_rc:0/0::gentoo, installed)
^ ^^^^^^^
dev-lang/perl:0/5.22= required by (virtual/perl-File-Spec-3.560.200_rc:0/0::gentoo, installed)
^^^^^^^^
(and 6 more with the same problems)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
!!! The slot conflict(s) shown above involve package(s) which may need to
!!! be rebuilt in order to solve the conflict(s). However, the following
!!! package(s) cannot be rebuilt for the reason(s) shown:
(virtual/perl-File-Spec-3.560.200_rc:0/0::gentoo, installed): ebuild is masked or unavailable
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
(sys-apps/util-linux-2.30.2:0/0::gentoo, ebuild scheduled for merge) pulled in by
>=sys-apps/util-linux-2.16 required by (sys-fs/e2fsprogs-1.43.3-r1:0/0::gentoo, installed)
sys-apps/util-linux required by (app-text/build-docbook-catalog-1.19.1:0/0::gentoo, installed)
>=sys-apps/util-linux-2.24 required by (sys-fs/udev-225-r1:0/0::gentoo, installed)
sys-apps/util-linux required by @system
sys-apps/util-linux[abi_x86_32(-)?,abi_x86_64(-)?,abi_x86_x32(-)?,abi_mips_n32(-)?,abi_mips_n64(-)?,abi_mips_o32(-)?,abi_ppc_32(-)?,abi_ppc_64(-)?,abi_s390_32(-)?,abi_s390_64(-)?] (sys-apps/util-linux[abi_s390_32(-)]) required by (dev-libs/glib-2.50.3-r1:2/2::gentoo, installed)
(sys-apps/s390-tools-1.23.1:0/0::gentoo, installed) pulled in by
sys-apps/s390-tools required by @system
!!! The following installed packages are masked:
- sys-devel/gcc-4.9.4::gentoo (masked by: package.mask)
/usr/portage/profiles/package.mask:
# Michał Górny <mgorny@gentoo.org>, Andreas K. Hüttel <dilfridge@gentoo.org>,
# Matthias Maier <tamiko@gentoo.org> (21 May 2017)
# These old versions of toolchain packages (binutils, gcc, glibc) are no
# longer officially supported and are not suitable for general use. Using
# these packages can result in build failures (and possible breakage) for
# many packages, and may leave your system vulnerable to known security
# exploits.
# If you still use one of these old toolchain packages, please upgrade (and
# switch the compiler / the binutils) ASAP. If you need them for a specific
# (isolated) use case, feel free to unmask them on your system.
# (updated 27 Dec 2017 with gcc < 5.4)
- sys-devel/binutils-2.26.1::gentoo (masked by: package.mask)
For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180114T090837Z/.catalyst_lock'
Command exited with non-zero status 1
429.43user 81.97system 7:13.73elapsed 117%CPU (0avgtext+0avgdata 464352maxresident)k
0inputs+0outputs (698major+37455716minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180114T090837Z.fpngaO/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-01-14 9:39 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-01-14 9:39 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180114T093635Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180114T093635Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180114T093635Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180114T093635Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180114T093635Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180114T093635Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180114T093635Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180114T093635Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180114T093635Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180114T093635Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180114T093635Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180114T093635Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180114T093635Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180114T093635Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180114T093635Z/
>>> Regenerating /etc/ld.so.cache...
Traceback (most recent call last):
File "/tmp/build.py", line 3, in <module>
import os,portage,sys
ImportError: No module named 'portage'
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180114T093635Z/.catalyst_lock'
Command exited with non-zero status 1
30.23user 5.63system 0:39.26elapsed 91%CPU (0avgtext+0avgdata 65264maxresident)k
0inputs+0outputs (358major+1406249minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180114T093635Z.qhKxYB/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-01-14 9:53 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-01-14 9:53 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o rijndael.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/rijndael.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/rijndael.c -fPIC -DPIC -o .libs/rijndael.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o twofish.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/twofish.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/twofish.c -fPIC -DPIC -o .libs/twofish.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o serpent.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/serpent.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/serpent.c -fPIC -DPIC -o .libs/serpent.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o rfc2268.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/rfc2268.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/rfc2268.c -fPIC -DPIC -o .libs/rfc2268.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o seed.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/seed.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/seed.c -fPIC -DPIC -o .libs/seed.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o camellia.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/camellia.c
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o camellia-glue.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/camellia-glue.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/camellia.c -fPIC -DPIC -o .libs/camellia.o
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/camellia-glue.c -fPIC -DPIC -o .libs/camellia-glue.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o idea.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/idea.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/idea.c -fPIC -DPIC -o .libs/idea.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o salsa20.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/salsa20.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/salsa20.c -fPIC -DPIC -o .libs/salsa20.o
s390-ibm-linux-gnu-gcc -o gost-s-box /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/gost-s-box.c
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o chacha20.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/chacha20.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/chacha20.c -fPIC -DPIC -o .libs/chacha20.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o dsa.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/dsa.c
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o rsa.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/rsa.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/dsa.c -fPIC -DPIC -o .libs/dsa.o
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/rsa.c -fPIC -DPIC -o .libs/rsa.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o elgamal.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/elgamal.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/elgamal.c -fPIC -DPIC -o .libs/elgamal.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o ecc.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/ecc.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/ecc.c -fPIC -DPIC -o .libs/ecc.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o ecc-curves.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/ecc-curves.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/ecc-curves.c -fPIC -DPIC -o .libs/ecc-curves.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o ecc-misc.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/ecc-misc.c
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o ecc-ecdsa.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/ecc-ecdsa.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/ecc-misc.c -fPIC -DPIC -o .libs/ecc-misc.o
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/ecc-ecdsa.c -fPIC -DPIC -o .libs/ecc-ecdsa.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o ecc-eddsa.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/ecc-eddsa.c
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o ecc-gost.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/ecc-gost.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/ecc-eddsa.c -fPIC -DPIC -o .libs/ecc-eddsa.o
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/ecc-gost.c -fPIC -DPIC -o .libs/ecc-gost.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o crc.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/crc.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/crc.c -fPIC -DPIC -o .libs/crc.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o gostr3411-94.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/gostr3411-94.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/gostr3411-94.c -fPIC -DPIC -o .libs/gostr3411-94.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o stribog.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/stribog.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/stribog.c -fPIC -DPIC -o .libs/stribog.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o md4.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/md4.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/md4.c -fPIC -DPIC -o .libs/md4.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o md5.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/md5.c
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o rmd160.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/rmd160.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/md5.c -fPIC -DPIC -o .libs/md5.o
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/rmd160.c -fPIC -DPIC -o .libs/rmd160.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o sha256.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/sha256.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/sha256.c -fPIC -DPIC -o .libs/sha256.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o sha512.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/sha512.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/sha512.c -fPIC -DPIC -o .libs/sha512.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o keccak.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/keccak.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/keccak.c -fPIC -DPIC -o .libs/keccak.o
`echo /bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/tiger.c | cat `
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/tiger.c -fPIC -DPIC -o .libs/tiger.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o whirlpool.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/whirlpool.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/whirlpool.c -fPIC -DPIC -o .libs/whirlpool.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o blake2.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/blake2.c
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o sha1.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/sha1.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/blake2.c -fPIC -DPIC -o .libs/blake2.o
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/sha1.c -fPIC -DPIC -o .libs/sha1.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o scrypt.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/scrypt.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/scrypt.c -fPIC -DPIC -o .libs/scrypt.o
./gost-s-box gost-sb.h
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o gost28147.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/gost28147.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/cipher/gost28147.c -fPIC -DPIC -o .libs/gost28147.o
/bin/sh ../libtool --tag=CC --mode=link s390-ibm-linux-gnu-gcc -O2 -pipe -fvisibility=hidden -Wall -Wl,-O1 -Wl,--as-needed -o libcipher.la cipher.lo cipher-cbc.lo cipher-cfb.lo cipher-ofb.lo cipher-ctr.lo cipher-aeswrap.lo cipher-ccm.lo cipher-cmac.lo cipher-gcm.lo cipher-gcm-intel-pclmul.lo cipher-gcm-armv8-aarch32-ce.lo cipher-gcm-armv8-aarch64-ce.lo cipher-poly1305.lo cipher-ocb.lo cipher-xts.lo cipher-selftest.lo pubkey.lo pubkey-util.lo md.lo mac.lo mac-hmac.lo mac-cmac.lo mac-gmac.lo mac-poly1305.lo poly1305.lo kdf.lo hmac-tests.lo primegen.lo hash-common.lo dsa-common.lo rsa-common.lo arcfour.lo blowfish.lo cast5.lo des.lo rijndael.lo twofish.lo serpent.lo rfc2268.lo seed.lo camellia.lo camellia-glue.lo idea.lo salsa20.lo gost28147.lo chacha20.lo dsa.lo rsa.lo elgamal.lo ecc.lo ecc-curves.lo ecc-misc.lo ecc-ecdsa.lo ecc-eddsa.lo ecc-gost.lo crc.lo gostr3411-94.lo stribog.lo md4.lo md5.lo rmd160.lo sha256.lo sha512.lo k
eccak.lo tiger.lo whirlpool.lo blake2.lo sha1.lo scrypt.lo
libtool: link: s390-ibm-linux-gnu-ar cru .libs/libcipher.a .libs/cipher.o .libs/cipher-cbc.o .libs/cipher-cfb.o .libs/cipher-ofb.o .libs/cipher-ctr.o .libs/cipher-aeswrap.o .libs/cipher-ccm.o .libs/cipher-cmac.o .libs/cipher-gcm.o .libs/cipher-gcm-intel-pclmul.o .libs/cipher-gcm-armv8-aarch32-ce.o .libs/cipher-gcm-armv8-aarch64-ce.o .libs/cipher-poly1305.o .libs/cipher-ocb.o .libs/cipher-xts.o .libs/cipher-selftest.o .libs/pubkey.o .libs/pubkey-util.o .libs/md.o .libs/mac.o .libs/mac-hmac.o .libs/mac-cmac.o .libs/mac-gmac.o .libs/mac-poly1305.o .libs/poly1305.o .libs/kdf.o .libs/hmac-tests.o .libs/primegen.o .libs/hash-common.o .libs/dsa-common.o .libs/rsa-common.o .libs/arcfour.o .libs/blowfish.o .libs/cast5.o .libs/des.o .libs/rijndael.o .libs/twofish.o .libs/serpent.o .libs/rfc2268.o .libs/seed.o .libs/camellia.o .libs/camellia-glue.o .libs/idea.o .libs/salsa20.o .libs/gost28147.o .libs/chacha20.o .libs/dsa.o .libs/rsa.o .libs/elgamal.o .libs/ecc.o .libs/ecc-curves.o .libs/ecc-mis
c.o .libs/ecc-ecdsa.o .libs/ecc-eddsa.o .libs/ecc-gost.o .libs/crc.o .libs/gostr3411-94.o .libs/stribog.o .libs/md4.o .libs/md5.o .libs/rmd160.o .libs/sha256.o .libs/sha512.o .libs/keccak.o .libs/tiger.o .libs/whirlpool.o .libs/blake2.o .libs/sha1.o .libs/scrypt.o
libtool: link: s390-ibm-linux-gnu-ranlib .libs/libcipher.a
libtool: link: ( cd ".libs" && rm -f "libcipher.la" && ln -s "../libcipher.la" "libcipher.la" )
make[2]: Leaving directory '/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1-abi_s390_32.s390/cipher'
Making all in random
make[2]: Entering directory '/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1-abi_s390_32.s390/random'
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o random.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random/random.c
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o random-csprng.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random/random-csprng.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random/random-csprng.c -fPIC -DPIC -o .libs/random-csprng.o
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random/random.c -fPIC -DPIC -o .libs/random.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o random-drbg.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random/random-drbg.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random/random-drbg.c -fPIC -DPIC -o .libs/random-drbg.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o random-system.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random/random-system.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random/random-system.c -fPIC -DPIC -o .libs/random-system.o
`echo /bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random/rndjent.c | cat `
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random/rndjent.c -fPIC -DPIC -o .libs/rndjent.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o rndhw.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random/rndhw.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random/rndhw.c -fPIC -DPIC -o .libs/rndhw.o
In file included from /usr/include/string.h:639:0,
from /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random/random-drbg.c:149:
In function 'memset',
inlined from 'drbg_hmac_update' at /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random/random-drbg.c:1003:7:
/usr/include/bits/string3.h:86:7: warning: call to '__warn_memset_zero_len' declared with attribute warning: memset used with constant zero length parameter; this could be due to transposed parameters
__warn_memset_zero_len ();
^
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c -o rndlinux.lo /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random/rndlinux.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random -I.. -I../src -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/random/rndlinux.c -fPIC -DPIC -o .libs/rndlinux.o
/bin/sh ../libtool --tag=CC --mode=link s390-ibm-linux-gnu-gcc -O2 -pipe -fvisibility=hidden -Wall -Wl,-O1 -Wl,--as-needed -o librandom.la random.lo random-csprng.lo random-drbg.lo random-system.lo rndjent.lo rndhw.lo rndlinux.lo
libtool: link: s390-ibm-linux-gnu-ar cru .libs/librandom.a .libs/random.o .libs/random-csprng.o .libs/random-drbg.o .libs/random-system.o .libs/rndjent.o .libs/rndhw.o .libs/rndlinux.o
libtool: link: s390-ibm-linux-gnu-ranlib .libs/librandom.a
libtool: link: ( cd ".libs" && rm -f "librandom.la" && ln -s "../librandom.la" "librandom.la" )
make[2]: Leaving directory '/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1-abi_s390_32.s390/random'
Making all in src
make[2]: Entering directory '/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1-abi_s390_32.s390/src'
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -I.. -O2 -pipe -fvisibility=hidden -Wall -c -o libgcrypt_la-visibility.lo `test -f 'visibility.c' || echo '/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src/'`visibility.c
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -I.. -O2 -pipe -fvisibility=hidden -Wall -c -o libgcrypt_la-misc.lo `test -f 'misc.c' || echo '/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src/'`misc.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -I.. -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src/visibility.c -fPIC -DPIC -o .libs/libgcrypt_la-visibility.o
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -I.. -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src/misc.c -fPIC -DPIC -o .libs/libgcrypt_la-misc.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -I.. -O2 -pipe -fvisibility=hidden -Wall -c -o libgcrypt_la-global.lo `test -f 'global.c' || echo '/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src/'`global.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -I.. -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src/global.c -fPIC -DPIC -o .libs/libgcrypt_la-global.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -I.. -O2 -pipe -fvisibility=hidden -Wall -c -o libgcrypt_la-sexp.lo `test -f 'sexp.c' || echo '/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src/'`sexp.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -I.. -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src/sexp.c -fPIC -DPIC -o .libs/libgcrypt_la-sexp.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -I.. -O2 -pipe -fvisibility=hidden -Wall -c -o libgcrypt_la-hwfeatures.lo `test -f 'hwfeatures.c' || echo '/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src/'`hwfeatures.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -I.. -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src/hwfeatures.c -fPIC -DPIC -o .libs/libgcrypt_la-hwfeatures.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -I.. -O2 -pipe -fvisibility=hidden -Wall -c -o libgcrypt_la-stdmem.lo `test -f 'stdmem.c' || echo '/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src/'`stdmem.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -I.. -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src/stdmem.c -fPIC -DPIC -o .libs/libgcrypt_la-stdmem.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -I.. -O2 -pipe -fvisibility=hidden -Wall -c -o libgcrypt_la-secmem.lo `test -f 'secmem.c' || echo '/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src/'`secmem.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -I.. -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src/secmem.c -fPIC -DPIC -o .libs/libgcrypt_la-secmem.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -I.. -O2 -pipe -fvisibility=hidden -Wall -c -o libgcrypt_la-missing-string.lo `test -f 'missing-string.c' || echo '/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src/'`missing-string.c
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -I.. -O2 -pipe -fvisibility=hidden -Wall -c -o libgcrypt_la-fips.lo `test -f 'fips.c' || echo '/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src/'`fips.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -I.. -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src/missing-string.c -fPIC -DPIC -o .libs/libgcrypt_la-missing-string.o
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -I.. -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src/fips.c -fPIC -DPIC -o .libs/libgcrypt_la-fips.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -I.. -O2 -pipe -fvisibility=hidden -Wall -c -o libgcrypt_la-hmac256.lo `test -f 'hmac256.c' || echo '/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src/'`hmac256.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -I.. -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src/hmac256.c -fPIC -DPIC -o .libs/libgcrypt_la-hmac256.o
/bin/sh ../libtool --tag=CC --mode=compile s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -I.. -O2 -pipe -fvisibility=hidden -Wall -c -o libgcrypt_la-context.lo `test -f 'context.c' || echo '/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src/'`context.c
s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -I.. -O2 -pipe -fvisibility=hidden -Wall -c -o dumpsexp-dumpsexp.o `test -f 'dumpsexp.c' || echo '/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src/'`dumpsexp.c
libtool: compile: s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -I.. -O2 -pipe -fvisibility=hidden -Wall -c /var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src/context.c -fPIC -DPIC -o .libs/libgcrypt_la-context.o
s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -I.. -DSTANDALONE -O2 -pipe -fvisibility=hidden -Wall -c -o hmac256-hmac256.o `test -f 'hmac256.c' || echo '/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src/'`hmac256.c
s390-ibm-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src -I.. -O2 -pipe -fvisibility=hidden -Wall -c -o mpicalc-mpicalc.o `test -f 'mpicalc.c' || echo '/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src/'`mpicalc.c
/bin/sh ../libtool --tag=CC --mode=link s390-ibm-linux-gnu-gcc -O2 -pipe -fvisibility=hidden -Wall -Wl,--version-script=/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src/libgcrypt.vers -version-info 22:1:2 -Wl,-O1 -Wl,--as-needed -o libgcrypt.la -rpath /usr/lib libgcrypt_la-visibility.lo libgcrypt_la-misc.lo libgcrypt_la-global.lo libgcrypt_la-sexp.lo libgcrypt_la-hwfeatures.lo libgcrypt_la-stdmem.lo libgcrypt_la-secmem.lo libgcrypt_la-missing-string.lo libgcrypt_la-fips.lo libgcrypt_la-hmac256.lo libgcrypt_la-context.lo ../cipher/libcipher.la ../random/librandom.la ../mpi/libmpi.la ../compat/libcompat.la -lgpg-error
/bin/sh ../libtool --tag=CC --mode=link s390-ibm-linux-gnu-gcc -O2 -pipe -fvisibility=hidden -Wall -Wl,-O1 -Wl,--as-needed -o dumpsexp dumpsexp-dumpsexp.o
libtool: link: s390-ibm-linux-gnu-gcc -O2 -pipe -fvisibility=hidden -Wall -Wl,-O1 -o dumpsexp dumpsexp-dumpsexp.o -Wl,--as-needed
libtool: link: s390-ibm-linux-gnu-gcc -shared -fPIC -DPIC .libs/libgcrypt_la-visibility.o .libs/libgcrypt_la-misc.o .libs/libgcrypt_la-global.o .libs/libgcrypt_la-sexp.o .libs/libgcrypt_la-hwfeatures.o .libs/libgcrypt_la-stdmem.o .libs/libgcrypt_la-secmem.o .libs/libgcrypt_la-missing-string.o .libs/libgcrypt_la-fips.o .libs/libgcrypt_la-hmac256.o .libs/libgcrypt_la-context.o -Wl,--whole-archive ../cipher/.libs/libcipher.a ../random/.libs/librandom.a ../mpi/.libs/libmpi.a ../compat/.libs/libcompat.a -Wl,--no-whole-archive -Wl,--as-needed -lgpg-error -O2 -Wl,--version-script=/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1/src/libgcrypt.vers -Wl,-O1 -Wl,-soname -Wl,libgcrypt.so.20 -o .libs/libgcrypt.so.20.2.1
/bin/sh ../libtool --tag=CC --mode=link s390-ibm-linux-gnu-gcc -DSTANDALONE -O2 -pipe -fvisibility=hidden -Wall -Wl,-O1 -Wl,--as-needed -o hmac256 hmac256-hmac256.o
libtool: link: (cd ".libs" && rm -f "libgcrypt.so.20" && ln -s "libgcrypt.so.20.2.1" "libgcrypt.so.20")
libtool: link: (cd ".libs" && rm -f "libgcrypt.so" && ln -s "libgcrypt.so.20.2.1" "libgcrypt.so")
libtool: link: ( cd ".libs" && rm -f "libgcrypt.la" && ln -s "../libgcrypt.la" "libgcrypt.la" )
/bin/sh ../libtool --tag=CC --mode=link s390-ibm-linux-gnu-gcc -O2 -pipe -fvisibility=hidden -Wall -Wl,-O1 -Wl,--as-needed -o mpicalc mpicalc-mpicalc.o libgcrypt.la -lgpg-error
libtool: link: s390-ibm-linux-gnu-gcc -DSTANDALONE -O2 -pipe -fvisibility=hidden -Wall -Wl,-O1 -o hmac256 hmac256-hmac256.o -Wl,--as-needed
libtool: link: s390-ibm-linux-gnu-gcc -O2 -pipe -fvisibility=hidden -Wall -Wl,-O1 -o .libs/mpicalc mpicalc-mpicalc.o -Wl,--as-needed ./.libs/libgcrypt.so -lgpg-error
./.libs/libgcrypt.so: undefined reference to `__warn_memset_zero_len'
collect2: error: ld returned 1 exit status
Makefile:723: recipe for target 'mpicalc' failed
make[2]: *** [mpicalc] Error 1
make[2]: Leaving directory '/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1-abi_s390_32.s390/src'
Makefile:488: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1-abi_s390_32.s390'
Makefile:420: recipe for target 'all' failed
make: *** [all] Error 2
* ERROR: dev-libs/libgcrypt-1.8.1::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=dev-libs/libgcrypt-1.8.1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-libs/libgcrypt-1.8.1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-libs/libgcrypt-1.8.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-libs/libgcrypt-1.8.1/temp/environment'.
* Working directory: '/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1-abi_s390_32.s390'
* S: '/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1'
* Messages for package dev-libs/libgcrypt-1.8.1:
* ERROR: dev-libs/libgcrypt-1.8.1::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=dev-libs/libgcrypt-1.8.1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-libs/libgcrypt-1.8.1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-libs/libgcrypt-1.8.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-libs/libgcrypt-1.8.1/temp/environment'.
* Working directory: '/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1-abi_s390_32.s390'
* S: '/var/tmp/portage/dev-libs/libgcrypt-1.8.1/work/libgcrypt-1.8.1'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180114T094433Z/.catalyst_lock'
Command exited with non-zero status 1
419.89user 111.56system 6:52.84elapsed 128%CPU (0avgtext+0avgdata 298128maxresident)k
0inputs+0outputs (730major+52812865minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180114T094433Z.23rzw6/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-01-14 19:56 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-01-14 19:56 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package dev-libs/glib-2.50.3-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - INOTIFY_USER
* You're on your own to make sure they are set if needed.
* Messages for package sys-fs/udev-233:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - BLK_DEV_BSG
* - DEVTMPFS
* - IDE
* - INOTIFY_USER
* - SYSFS_DEPRECATED
* - SYSFS_DEPRECATED_V2
* - SIGNALFD
* - EPOLL
* - FHANDLE
* - NET
* - FW_LOADER_USER_HELPER
* - UNIX
* You're on your own to make sure they are set if needed.
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* https://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/which sys-apps/less sys-devel/autoconf sys-devel/automake virtual/package-manager sys-apps/makedev sys-devel/gnuconfig virtual/os-headers sys-apps/net-tools virtual/pkgconfig sys-apps/findutils sys-apps/coreutils sys-devel/gcc sys-apps/grep app-arch/xz-utils net-misc/wget sys-apps/baselayout sys-devel/make app-arch/bzip2 sys-devel/libtool virtual/editor net-misc/rsync app-arch/tar sys-apps/file virtual/shadow app-arch/gzip sys-devel/patch virtual/libc sys-devel/flex sys-devel/bison sys-devel/gettext sys-apps/gawk sys-apps/diffutils app-shells/bash:0 sys-apps/sed sys-devel/binutils
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.9.1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r4 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/binutils (argument)
=sys-devel/binutils-2.29.1-r1 ~s390
# required by sys-devel/gcc-5.4.0-r4::gentoo
# required by sys-devel/gcc (argument)
=sys-devel/gcc-config-1.9.1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180114T193630Z/.catalyst_lock'
Command exited with non-zero status 1
1174.48user 249.38system 17:10.94elapsed 138%CPU (0avgtext+0avgdata 475632maxresident)k
0inputs+0outputs (825major+126623860minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180114T193630Z.HVSt4n/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-03-03 8:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-03-03 8:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180303T081211Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180303T081211Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180303T081211Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180303T081211Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180303T081211Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180303T081211Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180303T081211Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180303T081211Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180303T081211Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180303T081211Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180303T081211Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180303T081211Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180303T081211Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180303T081211Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180303T081211Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-arch/bzip2 app-arch/gzip sys-devel/flex sys-devel/bison app-arch/tar sys-devel/gettext virtual/os-headers sys-apps/baselayout sys-devel/binutils app-shells/bash:0 sys-apps/makedev sys-apps/gawk sys-apps/which sys-devel/gcc sys-apps/less sys-devel/patch virtual/shadow sys-apps/diffutils virtual/pkgconfig sys-devel/make sys-apps/sed sys-apps/file sys-devel/autoconf sys-apps/net-tools sys-apps/coreutils net-misc/wget sys-apps/portage sys-apps/findutils net-misc/rsync virtual/editor sys-devel/gnuconfig sys-devel/automake app-arch/xz-utils sys-devel/libtool sys-apps/grep virtual/libc
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r4 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.8.1::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.7 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180303T081211Z/.catalyst_lock'
Command exited with non-zero status 1
59.42user 14.04system 1:16.43elapsed 96%CPU (0avgtext+0avgdata 208144maxresident)k
0inputs+0outputs (577major+4321554minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180303T081211Z.ryd4sL/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-03-04 8:14 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-03-04 8:14 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage1.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180304T081120Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180304T081120Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180304T081120Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180304T081120Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180304T081120Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180304T081120Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180304T081120Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180304T081120Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180304T081120Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180304T081120Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180304T081120Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180304T081120Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180304T081120Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180304T081120Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180304T081120Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
[ebuild R ] sys-apps/portage-2.3.8
[ebuild U ] dev-libs/libxml2-2.9.7 [2.9.4-r1]
[ebuild rR ] sys-devel/gettext-0.19.8.1
[ebuild r U ] dev-libs/libxslt-1.1.30-r2 [1.1.29-r1]
[ebuild rR ] x11-misc/shared-mime-info-1.4
[ebuild rR ] app-text/docbook-xml-dtd-4.5-r1
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by @__auto_rebuild__ (argument)
=dev-libs/libxslt-1.1.30-r2 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180304T081120Z/.catalyst_lock'
Command exited with non-zero status 1
43.76user 9.30system 1:00.31elapsed 87%CPU (0avgtext+0avgdata 175840maxresident)k
0inputs+0outputs (560major+2480289minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180304T081120Z.7jzapn/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-03-05 8:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-03-05 8:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage1.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180305T081210Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180305T081210Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180305T081210Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180305T081210Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180305T081210Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180305T081210Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180305T081210Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180305T081210Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180305T081210Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180305T081210Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180305T081210Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180305T081210Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180305T081210Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180305T081210Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180305T081210Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
[ebuild R ] sys-apps/portage-2.3.8
[ebuild U ] dev-libs/libxml2-2.9.7 [2.9.4-r1]
[ebuild rR ] sys-devel/gettext-0.19.8.1
[ebuild r U ] dev-libs/libxslt-1.1.30-r2 [1.1.29-r1]
[ebuild rR ] app-text/docbook-xml-dtd-4.5-r1
[ebuild rR ] x11-misc/shared-mime-info-1.4
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by @__auto_rebuild__ (argument)
=dev-libs/libxslt-1.1.30-r2 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180305T081210Z/.catalyst_lock'
Command exited with non-zero status 1
43.95user 9.42system 1:01.44elapsed 86%CPU (0avgtext+0avgdata 176864maxresident)k
0inputs+0outputs (443major+2471533minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180305T081210Z.6alGO5/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-03-15 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-03-15 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180315T071244Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180315T071244Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180315T071244Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180315T071244Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180315T071244Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180315T071244Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180315T071244Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180315T071244Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180315T071244Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180315T071244Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180315T071244Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180315T071244Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180315T071244Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180315T071244Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180315T071244Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot net-misc/wget sys-devel/gcc sys-apps/makedev sys-devel/gettext virtual/libc sys-apps/less sys-apps/coreutils sys-apps/grep sys-devel/flex sys-apps/gawk app-shells/bash:0 sys-devel/make sys-devel/patch app-arch/xz-utils app-arch/bzip2 sys-apps/sed sys-devel/libtool sys-apps/portage app-arch/tar sys-devel/gnuconfig sys-apps/which sys-apps/file app-arch/gzip sys-apps/baselayout sys-apps/findutils virtual/pkgconfig virtual/editor sys-devel/bison sys-devel/autoconf sys-devel/binutils virtual/os-headers sys-devel/automake sys-apps/net-tools virtual/shadow net-misc/rsync sys-apps/diffutils
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild U ] sys-devel/automake-wrapper-11 [10]
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-11 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r4 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.16.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-1.16.1-r1 ~s390
# required by sys-devel/automake-1.16.1-r1::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-wrapper-11 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180315T071244Z/.catalyst_lock'
Command exited with non-zero status 1
59.51user 13.92system 1:18.08elapsed 94%CPU (0avgtext+0avgdata 209120maxresident)k
0inputs+0outputs (443major+4307350minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180315T071244Z.q5b6AT/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-03-16 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-03-16 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180316T071216Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180316T071216Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180316T071216Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180316T071216Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180316T071216Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180316T071216Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180316T071216Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180316T071216Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180316T071216Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180316T071216Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180316T071216Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180316T071216Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180316T071216Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180316T071216Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180316T071216Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/baselayout app-arch/xz-utils sys-apps/makedev sys-devel/make sys-apps/sed app-arch/bzip2 sys-apps/net-tools virtual/shadow sys-devel/autoconf sys-apps/grep sys-apps/which app-arch/tar app-arch/gzip sys-devel/libtool app-shells/bash:0 net-misc/wget virtual/os-headers sys-devel/gettext sys-apps/diffutils sys-devel/patch sys-apps/portage sys-apps/gawk net-misc/rsync sys-apps/coreutils sys-devel/gnuconfig sys-devel/automake sys-devel/binutils sys-apps/less virtual/pkgconfig sys-devel/flex sys-devel/bison sys-devel/gcc virtual/editor sys-apps/file virtual/libc sys-apps/findutils
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild U ] sys-devel/automake-wrapper-11 [10]
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-11 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r4 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.16.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-1.16.1-r1 ~s390
# required by sys-devel/automake-1.16.1-r1::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-wrapper-11 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180316T071216Z/.catalyst_lock'
Command exited with non-zero status 1
59.70user 13.91system 1:19.90elapsed 92%CPU (0avgtext+0avgdata 210800maxresident)k
0inputs+0outputs (447major+4301110minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180316T071216Z.KqJ4WM/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-03-17 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-03-17 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180317T071225Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180317T071225Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180317T071225Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180317T071225Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180317T071225Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180317T071225Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180317T071225Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180317T071225Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180317T071225Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180317T071225Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180317T071225Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180317T071225Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180317T071225Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180317T071225Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180317T071225Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-arch/bzip2 net-misc/wget sys-apps/portage sys-devel/autoconf sys-devel/gnuconfig sys-devel/libtool sys-apps/gawk app-shells/bash:0 sys-apps/less sys-devel/binutils virtual/editor virtual/libc app-arch/gzip sys-devel/make virtual/shadow sys-devel/gcc sys-apps/file sys-apps/coreutils sys-devel/gettext sys-apps/sed app-arch/tar app-arch/xz-utils sys-apps/which net-misc/rsync sys-devel/flex sys-apps/makedev virtual/os-headers sys-apps/grep sys-apps/findutils sys-apps/baselayout sys-apps/net-tools sys-devel/patch sys-devel/automake virtual/pkgconfig sys-apps/diffutils sys-devel/bison
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild U ] sys-devel/automake-wrapper-11 [10]
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-11 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r4 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.16.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-1.16.1-r1 ~s390
# required by sys-devel/automake-1.16.1-r1::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-wrapper-11 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180317T071225Z/.catalyst_lock'
Command exited with non-zero status 1
59.57user 14.09system 1:20.12elapsed 91%CPU (0avgtext+0avgdata 208176maxresident)k
0inputs+0outputs (425major+4310456minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180317T071225Z.jskw8R/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-03-18 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-03-18 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180318T071129Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180318T071129Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180318T071129Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180318T071129Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180318T071129Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180318T071129Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180318T071129Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180318T071129Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180318T071129Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180318T071129Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180318T071129Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180318T071129Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180318T071129Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180318T071129Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180318T071129Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/coreutils sys-devel/binutils sys-apps/baselayout net-misc/rsync sys-apps/sed sys-devel/gettext virtual/os-headers virtual/pkgconfig app-arch/xz-utils sys-apps/grep sys-apps/makedev sys-apps/gawk virtual/editor sys-devel/flex app-arch/gzip sys-devel/make sys-devel/gnuconfig virtual/libc sys-apps/file sys-apps/portage app-arch/tar sys-apps/net-tools sys-apps/less sys-apps/findutils sys-apps/which sys-apps/diffutils sys-devel/gcc net-misc/wget sys-devel/patch sys-devel/automake sys-devel/autoconf app-shells/bash:0 sys-devel/bison app-arch/bzip2 virtual/shadow sys-devel/libtool
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild U ] sys-devel/automake-wrapper-11 [10]
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-11 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r4 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.16.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/automake-1.16.1-r1::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-wrapper-11 ~s390
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-1.16.1-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180318T071129Z/.catalyst_lock'
Command exited with non-zero status 1
59.77user 14.02system 1:18.89elapsed 93%CPU (0avgtext+0avgdata 210048maxresident)k
0inputs+0outputs (428major+4305982minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180318T071129Z.4UpS9A/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-03-19 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-03-19 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180319T071236Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180319T071236Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180319T071236Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180319T071236Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180319T071236Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180319T071236Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180319T071236Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180319T071236Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180319T071236Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180319T071236Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180319T071236Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180319T071236Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180319T071236Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180319T071236Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180319T071236Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot virtual/libc app-arch/gzip sys-apps/findutils sys-apps/coreutils sys-apps/grep net-misc/rsync sys-apps/net-tools sys-devel/patch app-arch/bzip2 virtual/editor sys-devel/automake sys-apps/diffutils virtual/os-headers sys-devel/libtool sys-devel/binutils sys-apps/less sys-devel/autoconf app-arch/xz-utils sys-devel/gettext app-arch/tar sys-apps/gawk net-misc/wget sys-devel/flex sys-devel/gcc sys-apps/which sys-apps/file app-shells/bash:0 sys-apps/sed virtual/pkgconfig sys-devel/gnuconfig sys-devel/make sys-apps/baselayout virtual/shadow sys-apps/makedev sys-devel/bison sys-apps/portage
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild U ] sys-devel/automake-wrapper-11 [10]
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-11 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r4 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.16.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/automake-1.16.1-r1::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-wrapper-11 ~s390
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-1.16.1-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180319T071236Z/.catalyst_lock'
Command exited with non-zero status 1
59.86user 14.82system 1:20.11elapsed 93%CPU (0avgtext+0avgdata 214448maxresident)k
0inputs+0outputs (420major+4315877minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180319T071236Z.gdicPJ/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-03-20 7:14 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-03-20 7:14 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage1.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180320T071218Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180320T071218Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180320T071218Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180320T071218Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180320T071218Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180320T071218Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180320T071218Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180320T071218Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180320T071218Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180320T071218Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180320T071218Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
!!! catalyst: Error copying /etc/portage
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 871, in setup_confdir
"Error copying /etc/portage",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180320T071218Z/.catalyst_lock'
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180320T071218Z/.catalyst_lock'
Command exited with non-zero status 1
23.62user 4.81system 0:28.95elapsed 98%CPU (0avgtext+0avgdata 153600maxresident)k
0inputs+0outputs (40major+1020654minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180320T071218Z.P6CEGR/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-03-21 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-03-21 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180321T071222Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180321T071222Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180321T071222Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180321T071222Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180321T071222Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180321T071222Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180321T071222Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180321T071222Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180321T071222Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180321T071222Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180321T071222Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180321T071222Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180321T071222Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180321T071222Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180321T071222Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/net-tools app-arch/tar sys-apps/coreutils sys-devel/flex sys-devel/binutils sys-devel/gettext app-arch/xz-utils app-arch/gzip virtual/shadow sys-apps/which sys-devel/automake sys-apps/findutils sys-apps/baselayout sys-devel/patch sys-devel/make sys-apps/grep net-misc/wget net-misc/rsync sys-apps/sed virtual/editor sys-apps/diffutils virtual/pkgconfig sys-devel/libtool sys-devel/gcc sys-apps/makedev virtual/libc app-arch/bzip2 sys-apps/gawk virtual/os-headers sys-apps/portage app-shells/bash:0 sys-devel/gnuconfig sys-apps/file sys-devel/autoconf sys-apps/less sys-devel/bison
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild U ] sys-devel/automake-wrapper-11 [10]
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-11 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r4 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.16.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/automake-1.16.1-r1::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-wrapper-11 ~s390
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-1.16.1-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180321T071222Z/.catalyst_lock'
Command exited with non-zero status 1
59.67user 14.08system 1:19.73elapsed 92%CPU (0avgtext+0avgdata 204592maxresident)k
0inputs+0outputs (448major+4311771minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180321T071222Z.Bufmgg/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-03-22 7:16 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-03-22 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180322T071244Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180322T071244Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180322T071244Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180322T071244Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180322T071244Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180322T071244Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180322T071244Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180322T071244Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180322T071244Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180322T071244Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180322T071244Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180322T071244Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180322T071244Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180322T071244Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180322T071244Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/gawk sys-devel/gettext sys-devel/libtool app-arch/xz-utils app-arch/bzip2 app-arch/gzip virtual/shadow app-arch/tar sys-apps/diffutils net-misc/wget sys-devel/make sys-apps/coreutils sys-apps/less virtual/os-headers sys-apps/findutils sys-apps/which net-misc/rsync sys-apps/file sys-apps/grep sys-devel/gcc sys-devel/autoconf sys-apps/portage sys-devel/patch sys-devel/binutils sys-devel/automake sys-devel/flex virtual/pkgconfig app-shells/bash:0 sys-devel/bison virtual/libc sys-devel/gnuconfig sys-apps/sed sys-apps/baselayout sys-apps/makedev virtual/editor sys-apps/net-tools
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild U ] sys-devel/automake-wrapper-11 [10]
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-11 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r4 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.16.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/automake-1.16.1-r1::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-wrapper-11 ~s390
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-1.16.1-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180322T071244Z/.catalyst_lock'
Command exited with non-zero status 1
59.69user 13.94system 1:19.43elapsed 92%CPU (0avgtext+0avgdata 207024maxresident)k
0inputs+0outputs (599major+4308554minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180322T071244Z.pW8p2g/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-03-23 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-03-23 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180323T071213Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180323T071213Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180323T071213Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180323T071213Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180323T071213Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180323T071213Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180323T071213Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180323T071213Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180323T071213Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180323T071213Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180323T071213Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180323T071213Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180323T071213Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180323T071213Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180323T071213Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot virtual/editor app-arch/gzip sys-apps/makedev sys-apps/grep sys-apps/findutils app-shells/bash:0 sys-devel/gettext app-arch/xz-utils sys-devel/automake sys-apps/portage sys-devel/bison virtual/libc app-arch/tar sys-apps/baselayout sys-devel/autoconf sys-apps/sed sys-devel/patch sys-apps/which app-arch/bzip2 sys-devel/binutils net-misc/wget net-misc/rsync sys-devel/make sys-devel/flex sys-apps/less virtual/pkgconfig virtual/shadow sys-apps/gawk sys-apps/file sys-devel/gnuconfig sys-devel/gcc sys-apps/net-tools sys-devel/libtool virtual/os-headers sys-apps/coreutils sys-apps/diffutils
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild U ] sys-devel/automake-wrapper-11 [10]
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-11 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r4 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.16.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-1.16.1-r1 ~s390
# required by sys-devel/automake-1.16.1-r1::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-wrapper-11 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180323T071213Z/.catalyst_lock'
Command exited with non-zero status 1
60.37user 14.31system 1:19.07elapsed 94%CPU (0avgtext+0avgdata 207088maxresident)k
0inputs+0outputs (428major+4311385minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180323T071213Z.AiD13R/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-03-24 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-03-24 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180324T071234Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180324T071234Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180324T071234Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180324T071234Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180324T071234Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180324T071234Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180324T071234Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180324T071234Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180324T071234Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180324T071234Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180324T071234Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180324T071234Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180324T071234Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180324T071234Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180324T071234Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot virtual/pkgconfig sys-devel/gettext sys-apps/portage sys-devel/autoconf app-arch/gzip sys-apps/diffutils app-arch/xz-utils sys-devel/make sys-apps/findutils net-misc/wget sys-apps/makedev app-arch/bzip2 sys-devel/libtool sys-devel/binutils sys-apps/which sys-devel/flex app-shells/bash:0 app-arch/tar sys-devel/patch sys-devel/bison sys-apps/file net-misc/rsync virtual/shadow sys-apps/baselayout virtual/libc sys-devel/automake sys-devel/gcc virtual/os-headers sys-devel/gnuconfig sys-apps/sed sys-apps/less virtual/editor sys-apps/grep sys-apps/coreutils sys-apps/gawk sys-apps/net-tools
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild U ] sys-devel/automake-wrapper-11 [10]
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-11 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r4 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.16.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-1.16.1-r1 ~s390
# required by sys-devel/automake-1.16.1-r1::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-wrapper-11 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180324T071234Z/.catalyst_lock'
Command exited with non-zero status 1
60.18user 14.00system 1:19.35elapsed 93%CPU (0avgtext+0avgdata 205008maxresident)k
0inputs+0outputs (412major+4309546minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180324T071234Z.649dpx/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-03-25 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-03-25 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180325T071153Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180325T071153Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180325T071153Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180325T071153Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180325T071153Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180325T071153Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180325T071153Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180325T071153Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180325T071153Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180325T071153Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180325T071153Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180325T071153Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180325T071153Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/sed sys-apps/findutils sys-devel/libtool sys-devel/gettext sys-devel/flex net-misc/wget sys-devel/binutils sys-apps/which sys-apps/net-tools app-arch/tar sys-apps/file app-arch/gzip sys-apps/gawk virtual/pkgconfig sys-apps/makedev sys-apps/portage sys-devel/patch virtual/os-headers sys-apps/baselayout virtual/libc virtual/shadow app-arch/xz-utils sys-devel/bison app-shells/bash:0 sys-devel/gnuconfig app-arch/bzip2 sys-apps/less sys-devel/autoconf virtual/editor sys-devel/make sys-devel/gcc sys-devel/automake sys-apps/grep net-misc/rsync sys-apps/diffutils sys-apps/coreutils
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild U ] sys-devel/automake-wrapper-11 [10]
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-11 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.16.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-1.16.1-r1 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=sys-apps/sandbox-2.13 ~s390
# required by sys-devel/automake-1.16.1-r1::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-wrapper-11 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180325T071153Z/.catalyst_lock'
Command exited with non-zero status 1
60.52user 14.62system 1:21.95elapsed 91%CPU (0avgtext+0avgdata 211056maxresident)k
0inputs+0outputs (426major+4312550minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180325T071153Z.lXZewE/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-03-26 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-03-26 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180326T071217Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180326T071217Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180326T071217Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180326T071217Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180326T071217Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180326T071217Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180326T071217Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180326T071217Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180326T071217Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/portage net-misc/rsync sys-devel/flex sys-devel/automake sys-apps/less virtual/shadow app-arch/gzip sys-apps/file sys-apps/which app-arch/xz-utils sys-devel/gettext sys-apps/findutils sys-apps/coreutils sys-devel/bison sys-devel/gnuconfig net-misc/wget sys-apps/grep sys-devel/libtool sys-apps/baselayout virtual/pkgconfig sys-devel/patch sys-apps/net-tools virtual/os-headers sys-apps/sed sys-devel/gcc sys-apps/makedev app-arch/tar app-arch/bzip2 sys-devel/make sys-apps/diffutils virtual/editor sys-devel/autoconf sys-apps/gawk sys-devel/binutils virtual/libc app-shells/bash:0
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild U ] sys-devel/automake-wrapper-11 [10]
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-11 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.16.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/automake-1.16.1-r1::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-wrapper-11 ~s390
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-1.16.1-r1 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by perl-core/File-Path-2.130.0::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=sys-apps/sandbox-2.13 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180326T071217Z/.catalyst_lock'
Command exited with non-zero status 1
59.69user 13.53system 1:20.44elapsed 91%CPU (0avgtext+0avgdata 206160maxresident)k
0inputs+0outputs (413major+4314475minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180326T071217Z.PgXnFJ/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-03-27 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-03-27 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180327T071230Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180327T071230Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180327T071230Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180327T071230Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180327T071230Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180327T071230Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180327T071230Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180327T071230Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180327T071230Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180327T071230Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-arch/tar virtual/libc sys-apps/gawk sys-devel/gnuconfig sys-apps/sed sys-devel/patch sys-devel/binutils sys-devel/autoconf sys-apps/baselayout sys-devel/flex app-arch/xz-utils sys-apps/less virtual/os-headers sys-apps/diffutils sys-apps/portage net-misc/wget virtual/pkgconfig sys-devel/make sys-apps/makedev sys-devel/libtool sys-apps/findutils sys-apps/net-tools sys-devel/bison sys-apps/grep virtual/editor app-arch/gzip app-shells/bash:0 sys-devel/gettext sys-apps/which sys-apps/file sys-devel/gcc app-arch/bzip2 net-misc/rsync sys-apps/coreutils sys-devel/automake virtual/shadow
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild U ] sys-devel/automake-wrapper-11 [10]
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-11 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.16.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=sys-apps/sandbox-2.13 ~s390
# required by sys-devel/automake-1.16.1-r1::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-wrapper-11 ~s390
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-1.16.1-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180327T071230Z/.catalyst_lock'
Command exited with non-zero status 1
59.99user 13.84system 1:21.14elapsed 90%CPU (0avgtext+0avgdata 209408maxresident)k
0inputs+0outputs (441major+4308571minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180327T071230Z.DUezIf/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-03-28 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-03-28 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180328T071239Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180328T071239Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180328T071239Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180328T071239Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180328T071239Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180328T071239Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180328T071239Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180328T071239Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180328T071239Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/autoconf sys-apps/gawk app-arch/bzip2 sys-apps/which net-misc/rsync sys-apps/diffutils sys-devel/gettext virtual/pkgconfig sys-apps/file sys-apps/portage sys-devel/bison sys-devel/automake app-arch/xz-utils sys-apps/grep sys-apps/net-tools sys-devel/patch app-shells/bash:0 virtual/editor sys-apps/sed sys-devel/gcc sys-devel/gnuconfig app-arch/tar sys-apps/makedev sys-apps/baselayout sys-devel/binutils sys-devel/flex sys-devel/make virtual/libc sys-apps/less sys-devel/libtool app-arch/gzip net-misc/wget virtual/shadow virtual/os-headers sys-apps/coreutils sys-apps/findutils
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild U ] sys-devel/automake-wrapper-11 [10]
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-11 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.16.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-1.16.1-r1 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=sys-apps/sandbox-2.13 ~s390
# required by sys-devel/automake-1.16.1-r1::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-devel/automake-wrapper-11 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180328T071239Z/.catalyst_lock'
Command exited with non-zero status 1
59.34user 13.43system 1:17.81elapsed 93%CPU (0avgtext+0avgdata 215264maxresident)k
0inputs+0outputs (562major+4311726minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180328T071239Z.gU0Id5/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-03-29 7:16 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-03-29 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180329T071243Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180329T071243Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180329T071243Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180329T071243Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180329T071243Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180329T071243Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180329T071243Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180329T071243Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180329T071243Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180329T071243Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180329T071243Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180329T071243Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180329T071243Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180329T071243Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 2) sys-apps/portage-2.3.8::gentoo
>>> Emerging (2 of 2) sys-devel/automake-1.15.1-r2::gentoo
>>> Installing (2 of 2) sys-devel/automake-1.15.1-r2::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/baselayout app-arch/tar sys-apps/findutils sys-apps/which net-misc/rsync virtual/os-headers sys-apps/diffutils sys-devel/libtool sys-devel/gcc virtual/shadow virtual/libc sys-devel/binutils net-misc/wget sys-devel/automake sys-apps/coreutils app-shells/bash:0 sys-devel/bison sys-apps/makedev sys-devel/gettext virtual/pkgconfig sys-apps/sed sys-devel/autoconf sys-apps/less sys-devel/make sys-apps/grep sys-devel/gnuconfig sys-apps/gawk sys-devel/flex sys-apps/file sys-apps/portage app-arch/xz-utils sys-devel/patch virtual/editor app-arch/bzip2 sys-apps/net-tools app-arch/gzip
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=sys-apps/sandbox-2.13 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180329T071243Z/.catalyst_lock'
Command exited with non-zero status 1
67.87user 19.00system 1:33.86elapsed 92%CPU (0avgtext+0avgdata 204720maxresident)k
0inputs+0outputs (753major+5712013minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180329T071243Z.WSxmOt/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-03-30 7:20 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-03-30 7:20 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180330T071310Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180330T071310Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180330T071310Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180330T071310Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180330T071310Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180330T071310Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180330T071310Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180330T071310Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180330T071310Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180330T071310Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180330T071310Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180330T071310Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180330T071310Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180330T071310Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 2) sys-apps/portage-2.3.8::gentoo
>>> Emerging (2 of 2) sys-devel/automake-1.15.1-r2::gentoo
>>> Installing (2 of 2) sys-devel/automake-1.15.1-r2::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot virtual/editor sys-apps/sed sys-devel/autoconf sys-devel/patch sys-devel/flex virtual/pkgconfig app-arch/bzip2 virtual/os-headers app-arch/xz-utils sys-devel/make sys-devel/binutils sys-apps/less sys-apps/which sys-devel/gettext net-misc/wget virtual/shadow sys-apps/file app-arch/tar virtual/libc sys-devel/libtool sys-devel/bison sys-apps/makedev net-misc/rsync app-arch/gzip sys-devel/gnuconfig sys-apps/grep sys-apps/findutils app-shells/bash:0 sys-devel/gcc sys-devel/automake sys-apps/baselayout sys-apps/net-tools sys-apps/coreutils sys-apps/gawk sys-apps/portage sys-apps/diffutils
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=sys-apps/sandbox-2.13 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180330T071310Z/.catalyst_lock'
Command exited with non-zero status 1
68.09user 18.53system 2:33.17elapsed 56%CPU (0avgtext+0avgdata 207296maxresident)k
0inputs+0outputs (851major+5725112minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180330T071310Z.UcF6pP/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-03-31 7:16 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-03-31 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180331T071208Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180331T071208Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180331T071208Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180331T071208Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180331T071208Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180331T071208Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180331T071208Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180331T071208Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180331T071208Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180331T071208Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Emerging (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Installing (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Emerging (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Installing (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Emerging (4 of 4) dev-python/six-1.11.0::gentoo
>>> Installing (4 of 4) dev-python/six-1.11.0::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/sed sys-devel/libtool sys-devel/automake app-shells/bash:0 sys-apps/file sys-apps/makedev sys-apps/less app-arch/xz-utils virtual/pkgconfig sys-apps/diffutils sys-devel/gnuconfig sys-apps/coreutils sys-devel/gcc sys-apps/portage sys-devel/patch sys-apps/gawk virtual/libc net-misc/wget sys-apps/grep sys-devel/binutils sys-apps/baselayout virtual/os-headers sys-devel/flex app-arch/gzip sys-devel/make virtual/shadow sys-devel/bison net-misc/rsync sys-devel/gettext sys-apps/which virtual/editor sys-apps/findutils sys-apps/net-tools app-arch/bzip2 app-arch/tar sys-devel/autoconf
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=sys-apps/sandbox-2.13 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180331T071208Z/.catalyst_lock'
Command exited with non-zero status 1
80.55user 20.17system 1:46.70elapsed 94%CPU (0avgtext+0avgdata 226976maxresident)k
0inputs+0outputs (742major+7294322minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180331T071208Z.QWKrKE/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-01 7:16 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-01 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180401T071147Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180401T071147Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180401T071147Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180401T071147Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180401T071147Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180401T071147Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180401T071147Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180401T071147Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180401T071147Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180401T071147Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Emerging (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Installing (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Emerging (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Installing (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Emerging (4 of 4) dev-python/six-1.11.0::gentoo
>>> Installing (4 of 4) dev-python/six-1.11.0::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/portage sys-apps/less app-arch/xz-utils virtual/shadow sys-devel/gcc net-misc/wget sys-apps/sed sys-devel/patch app-arch/bzip2 sys-apps/file sys-devel/flex sys-devel/gnuconfig sys-devel/gettext sys-apps/makedev app-arch/tar sys-apps/net-tools sys-devel/autoconf sys-apps/findutils virtual/pkgconfig virtual/libc sys-apps/gawk sys-devel/libtool virtual/os-headers app-arch/gzip sys-apps/grep app-shells/bash:0 sys-devel/automake sys-apps/coreutils sys-devel/bison net-misc/rsync sys-apps/diffutils sys-apps/which virtual/editor sys-devel/binutils sys-apps/baselayout sys-devel/make
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=sys-apps/sandbox-2.13 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180401T071147Z/.catalyst_lock'
Command exited with non-zero status 1
80.41user 20.31system 1:47.90elapsed 93%CPU (0avgtext+0avgdata 223536maxresident)k
0inputs+0outputs (746major+7294722minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180401T071147Z.ke2wh3/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-02 7:16 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-02 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180402T071222Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180402T071222Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180402T071222Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180402T071222Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180402T071222Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180402T071222Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180402T071222Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180402T071222Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180402T071222Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180402T071222Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Emerging (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Installing (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Emerging (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Installing (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Emerging (4 of 4) dev-python/six-1.11.0::gentoo
>>> Installing (4 of 4) dev-python/six-1.11.0::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/gcc virtual/shadow sys-devel/libtool app-shells/bash:0 sys-apps/file app-arch/tar sys-apps/gawk sys-apps/net-tools net-misc/rsync sys-apps/grep sys-apps/diffutils sys-apps/sed sys-devel/patch sys-apps/baselayout virtual/libc sys-apps/portage sys-apps/makedev net-misc/wget virtual/editor sys-apps/less virtual/os-headers sys-devel/binutils sys-devel/gettext sys-devel/gnuconfig sys-devel/flex sys-devel/autoconf sys-apps/which sys-apps/coreutils sys-devel/automake sys-devel/bison app-arch/xz-utils virtual/pkgconfig sys-apps/findutils sys-devel/make app-arch/bzip2 app-arch/gzip
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=sys-apps/sandbox-2.13 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180402T071222Z/.catalyst_lock'
Command exited with non-zero status 1
81.55user 22.28system 1:50.94elapsed 93%CPU (0avgtext+0avgdata 226608maxresident)k
0inputs+0outputs (782major+7300295minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180402T071222Z.SEiRnG/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-03 7:18 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-03 7:18 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180403T071256Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180403T071256Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180403T071256Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180403T071256Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180403T071256Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180403T071256Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180403T071256Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180403T071256Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180403T071256Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180403T071256Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Emerging (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Installing (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Emerging (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Installing (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Emerging (4 of 4) dev-python/six-1.11.0::gentoo
>>> Installing (4 of 4) dev-python/six-1.11.0::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/gcc sys-devel/gnuconfig sys-devel/flex sys-apps/portage virtual/pkgconfig sys-devel/make sys-apps/file app-shells/bash:0 sys-devel/automake virtual/shadow sys-apps/diffutils sys-apps/grep net-misc/wget sys-apps/net-tools sys-apps/coreutils sys-devel/bison sys-apps/baselayout sys-apps/which virtual/libc sys-devel/binutils app-arch/gzip net-misc/rsync sys-apps/gawk app-arch/xz-utils app-arch/bzip2 sys-devel/gettext sys-devel/libtool virtual/os-headers sys-apps/findutils sys-apps/sed sys-apps/makedev app-arch/tar virtual/editor sys-devel/patch sys-devel/autoconf sys-apps/less
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=sys-apps/sandbox-2.13 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180403T071256Z/.catalyst_lock'
Command exited with non-zero status 1
81.39user 22.02system 2:39.37elapsed 64%CPU (0avgtext+0avgdata 227520maxresident)k
0inputs+0outputs (739major+7312882minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180403T071256Z.9XFn16/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-04 7:16 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-04 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180404T071218Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180404T071218Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180404T071218Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180404T071218Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180404T071218Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180404T071218Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180404T071218Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180404T071218Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180404T071218Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180404T071218Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Emerging (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Installing (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Emerging (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Installing (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Emerging (4 of 4) dev-python/six-1.11.0::gentoo
>>> Installing (4 of 4) dev-python/six-1.11.0::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-shells/bash:0 sys-devel/gcc sys-apps/grep virtual/pkgconfig sys-apps/coreutils sys-devel/automake net-misc/rsync sys-devel/flex app-arch/xz-utils sys-devel/patch sys-apps/net-tools app-arch/gzip sys-devel/gnuconfig sys-apps/which app-arch/tar virtual/shadow sys-apps/portage sys-devel/binutils sys-apps/baselayout sys-devel/gettext sys-devel/bison sys-apps/sed sys-apps/less sys-devel/libtool sys-apps/diffutils sys-devel/make sys-apps/gawk virtual/editor virtual/os-headers sys-apps/makedev virtual/libc net-misc/wget sys-apps/findutils sys-devel/autoconf app-arch/bzip2 sys-apps/file
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by sys-devel/automake-1.15.1-r2::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-apps/sandbox-2.13 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180404T071218Z/.catalyst_lock'
Command exited with non-zero status 1
80.67user 20.19system 1:49.22elapsed 92%CPU (0avgtext+0avgdata 223344maxresident)k
0inputs+0outputs (881major+7292096minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180404T071218Z.X52tZY/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-05 7:16 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-05 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180405T071225Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180405T071225Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180405T071225Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180405T071225Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180405T071225Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180405T071225Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180405T071225Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180405T071225Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180405T071225Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180405T071225Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Emerging (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Installing (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Emerging (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Installing (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Emerging (4 of 4) dev-python/six-1.11.0::gentoo
>>> Installing (4 of 4) dev-python/six-1.11.0::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/which sys-apps/portage net-misc/rsync sys-apps/sed sys-apps/coreutils sys-devel/automake sys-devel/make sys-apps/baselayout sys-devel/patch app-shells/bash:0 app-arch/tar sys-devel/gcc sys-apps/less sys-apps/file virtual/pkgconfig sys-devel/gnuconfig app-arch/gzip virtual/shadow sys-devel/autoconf sys-apps/gawk app-arch/xz-utils sys-devel/binutils virtual/editor sys-devel/libtool virtual/libc sys-devel/gettext net-misc/wget sys-apps/net-tools sys-apps/makedev sys-apps/diffutils app-arch/bzip2 sys-apps/grep sys-devel/flex virtual/os-headers sys-apps/findutils sys-devel/bison
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by perl-core/File-Path-2.130.0::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=sys-apps/sandbox-2.13 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180405T071225Z/.catalyst_lock'
Command exited with non-zero status 1
80.16user 19.92system 1:46.35elapsed 94%CPU (0avgtext+0avgdata 227552maxresident)k
0inputs+0outputs (769major+7293075minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180405T071225Z.iq4kAJ/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-06 7:16 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-06 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180406T071219Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180406T071219Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180406T071219Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180406T071219Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180406T071219Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180406T071219Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180406T071219Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180406T071219Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180406T071219Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Emerging (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Installing (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Emerging (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Installing (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Emerging (4 of 4) dev-python/six-1.11.0::gentoo
>>> Installing (4 of 4) dev-python/six-1.11.0::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot virtual/libc sys-devel/automake sys-devel/gettext sys-devel/make app-arch/tar sys-devel/binutils app-arch/xz-utils sys-apps/net-tools sys-apps/which net-misc/wget sys-apps/portage sys-devel/libtool sys-apps/diffutils app-arch/bzip2 sys-apps/baselayout app-shells/bash:0 sys-apps/makedev app-arch/gzip sys-apps/findutils sys-devel/autoconf sys-apps/grep sys-apps/file sys-devel/bison virtual/editor virtual/pkgconfig sys-devel/patch sys-apps/coreutils sys-devel/gcc virtual/shadow sys-apps/sed sys-devel/flex sys-apps/gawk sys-apps/less sys-devel/gnuconfig net-misc/rsync virtual/os-headers
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.70 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by perl-core/File-Path-2.130.0::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=sys-apps/sandbox-2.13 ~s390
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by perl-core/File-Path-2.130.0::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=app-portage/portage-utils-0.70 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180406T071219Z/.catalyst_lock'
Command exited with non-zero status 1
80.34user 19.93system 1:45.52elapsed 95%CPU (0avgtext+0avgdata 227184maxresident)k
0inputs+0outputs (771major+7295936minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180406T071219Z.Q1L4Wa/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-07 7:16 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-07 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180407T071211Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180407T071211Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180407T071211Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180407T071211Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180407T071211Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180407T071211Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180407T071211Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180407T071211Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180407T071211Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180407T071211Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Emerging (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Installing (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Emerging (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Installing (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Emerging (4 of 4) dev-python/six-1.11.0::gentoo
>>> Installing (4 of 4) dev-python/six-1.11.0::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/makedev sys-apps/less app-arch/bzip2 virtual/libc sys-devel/gnuconfig sys-devel/libtool sys-devel/flex sys-apps/diffutils sys-devel/automake sys-apps/sed sys-devel/patch sys-devel/binutils sys-apps/net-tools sys-devel/autoconf app-shells/bash:0 sys-devel/gettext sys-apps/baselayout app-arch/tar app-arch/xz-utils virtual/pkgconfig sys-devel/gcc net-misc/rsync sys-apps/portage virtual/editor sys-apps/grep sys-apps/gawk sys-devel/bison net-misc/wget sys-devel/make virtual/shadow sys-apps/file virtual/os-headers sys-apps/findutils app-arch/gzip sys-apps/which sys-apps/coreutils
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by sys-devel/autoconf-2.69-r4::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-apps/sandbox-2.13 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180407T071211Z/.catalyst_lock'
Command exited with non-zero status 1
80.41user 20.79system 1:49.75elapsed 92%CPU (0avgtext+0avgdata 223424maxresident)k
0inputs+0outputs (772major+7304836minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180407T071211Z.uDaymX/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-08 7:16 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-08 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180408T071149Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180408T071149Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180408T071149Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180408T071149Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180408T071149Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180408T071149Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180408T071149Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180408T071149Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180408T071149Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180408T071149Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Emerging (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Installing (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Emerging (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Installing (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Emerging (4 of 4) dev-python/six-1.11.0::gentoo
>>> Installing (4 of 4) dev-python/six-1.11.0::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot virtual/libc app-arch/bzip2 sys-apps/portage sys-apps/sed sys-devel/make sys-apps/less sys-devel/libtool sys-apps/grep sys-apps/makedev app-arch/tar net-misc/wget app-arch/xz-utils sys-apps/gawk sys-apps/findutils sys-devel/automake sys-apps/file sys-devel/bison sys-apps/net-tools sys-devel/binutils app-shells/bash:0 sys-devel/patch sys-devel/gnuconfig sys-apps/which sys-devel/gettext net-misc/rsync virtual/pkgconfig app-arch/gzip virtual/editor sys-apps/diffutils virtual/shadow sys-apps/coreutils sys-apps/baselayout sys-devel/flex virtual/os-headers sys-devel/autoconf sys-devel/gcc
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=sys-apps/sandbox-2.13 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180408T071149Z/.catalyst_lock'
Command exited with non-zero status 1
80.66user 21.09system 1:50.50elapsed 92%CPU (0avgtext+0avgdata 229280maxresident)k
0inputs+0outputs (744major+7299068minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180408T071149Z.fXFqXd/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-09 7:16 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-09 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
to /var/tmp/catalyst/tmp/default/stage1-s390-20180409T071228Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180409T071228Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180409T071228Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180409T071228Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180409T071228Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180409T071228Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180409T071228Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Emerging (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Installing (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Emerging (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Installing (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Emerging (4 of 4) dev-python/six-1.11.0::gentoo
>>> Installing (4 of 4) dev-python/six-1.11.0::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/makedev sys-apps/net-tools sys-apps/findutils app-arch/bzip2 sys-devel/automake sys-devel/gettext sys-devel/flex sys-apps/which app-arch/xz-utils sys-apps/less virtual/libc sys-apps/sed sys-apps/portage sys-apps/coreutils sys-devel/binutils virtual/editor sys-devel/gnuconfig sys-apps/grep sys-devel/autoconf net-misc/rsync virtual/os-headers app-arch/gzip net-misc/wget sys-apps/file sys-devel/bison app-shells/bash:0 sys-apps/baselayout sys-apps/diffutils sys-devel/make sys-devel/libtool virtual/shadow sys-devel/gcc sys-apps/gawk app-arch/tar sys-devel/patch virtual/pkgconfig
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=sys-apps/sandbox-2.13 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=app-misc/pax-utils-1.2.3-r1 ~s390
# required by virtual/shadow-0::gentoo
# required by @system
# required by @world (argument)
=sys-apps/shadow-4.5-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180409T071228Z/.catalyst_lock'
Command exited with non-zero status 1
81.50user 22.24system 2:12.65elapsed 78%CPU (0avgtext+0avgdata 227936maxresident)k
0inputs+0outputs (710major+7301241minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180409T071228Z.N5IyXn/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-10 7:16 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-10 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180410T071218Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180410T071218Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180410T071218Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180410T071218Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180410T071218Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180410T071218Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180410T071218Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Emerging (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Installing (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Emerging (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Installing (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Emerging (4 of 4) dev-python/six-1.11.0::gentoo
>>> Installing (4 of 4) dev-python/six-1.11.0::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/autoconf sys-devel/gettext sys-devel/automake sys-apps/coreutils sys-apps/less virtual/libc virtual/shadow virtual/editor net-misc/rsync virtual/os-headers sys-devel/gnuconfig sys-apps/which sys-apps/file sys-apps/diffutils sys-devel/make app-arch/tar sys-devel/bison sys-apps/findutils sys-devel/libtool sys-apps/portage sys-apps/grep sys-apps/makedev sys-devel/flex sys-apps/sed sys-devel/binutils sys-apps/net-tools app-arch/gzip app-arch/xz-utils sys-apps/gawk sys-devel/gcc sys-devel/patch virtual/pkgconfig app-arch/bzip2 sys-apps/baselayout app-shells/bash:0 net-misc/wget
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by virtual/shadow-0::gentoo
# required by @system
# required by @world (argument)
=sys-apps/shadow-4.5-r1 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=app-misc/pax-utils-1.2.3-r1 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=sys-apps/sandbox-2.13 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180410T071218Z/.catalyst_lock'
Command exited with non-zero status 1
81.01user 20.89system 1:53.34elapsed 89%CPU (0avgtext+0avgdata 223488maxresident)k
0inputs+0outputs (881major+7297860minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180410T071218Z.tUWokD/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-11 7:16 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-11 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180411T071230Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180411T071230Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180411T071230Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180411T071230Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180411T071230Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180411T071230Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Emerging (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Installing (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Emerging (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Installing (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Emerging (4 of 4) dev-python/six-1.11.0::gentoo
>>> Installing (4 of 4) dev-python/six-1.11.0::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-arch/tar sys-devel/bison sys-apps/portage sys-apps/gawk virtual/libc sys-apps/less sys-apps/baselayout virtual/os-headers net-misc/rsync virtual/shadow virtual/editor app-shells/bash:0 sys-devel/automake sys-apps/coreutils sys-devel/flex sys-devel/autoconf sys-devel/make sys-devel/gnuconfig sys-apps/sed app-arch/gzip sys-apps/findutils sys-apps/net-tools sys-devel/binutils sys-apps/makedev sys-apps/which sys-apps/diffutils sys-devel/libtool sys-apps/file sys-devel/gettext app-arch/xz-utils sys-devel/patch app-arch/bzip2 net-misc/wget virtual/pkgconfig sys-devel/gcc sys-apps/grep
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by virtual/shadow-0::gentoo
# required by @system
# required by @world (argument)
=sys-apps/shadow-4.5-r1 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by sys-devel/autoconf-2.69-r4::gentoo
# required by sys-devel/automake-1.15.1-r2::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=app-misc/pax-utils-1.2.3-r1 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by sys-devel/autoconf-2.69-r4::gentoo
# required by sys-devel/automake-1.15.1-r2::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-apps/sandbox-2.13 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180411T071230Z/.catalyst_lock'
Command exited with non-zero status 1
80.42user 19.90system 1:47.38elapsed 93%CPU (0avgtext+0avgdata 223184maxresident)k
0inputs+0outputs (755major+7298023minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180411T071230Z.AEYtxC/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-12 7:16 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-12 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180412T071240Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180412T071240Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180412T071240Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180412T071240Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180412T071240Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180412T071240Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180412T071240Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Emerging (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Installing (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Emerging (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Installing (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Emerging (4 of 4) dev-python/six-1.11.0::gentoo
>>> Installing (4 of 4) dev-python/six-1.11.0::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/gnuconfig sys-devel/bison sys-devel/automake net-misc/rsync sys-apps/findutils virtual/shadow sys-apps/baselayout sys-apps/file app-shells/bash:0 sys-devel/autoconf sys-apps/makedev sys-devel/patch virtual/os-headers sys-apps/grep sys-devel/gcc virtual/editor sys-devel/binutils sys-devel/make sys-devel/libtool sys-apps/gawk virtual/pkgconfig app-arch/tar sys-apps/sed sys-apps/less app-arch/xz-utils sys-apps/net-tools sys-devel/gettext net-misc/wget sys-apps/portage sys-apps/diffutils app-arch/gzip sys-apps/which virtual/libc sys-apps/coreutils app-arch/bzip2 sys-devel/flex
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by virtual/shadow-0::gentoo
# required by @system
# required by @world (argument)
=sys-apps/shadow-4.5-r1 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=app-misc/pax-utils-1.2.3-r1 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=sys-apps/sandbox-2.13 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180412T071240Z/.catalyst_lock'
Command exited with non-zero status 1
81.03user 20.95system 1:50.66elapsed 92%CPU (0avgtext+0avgdata 227552maxresident)k
0inputs+0outputs (734major+7302494minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180412T071240Z.igbADT/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-13 7:16 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-13 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180413T071219Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180413T071219Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180413T071219Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180413T071219Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180413T071219Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180413T071219Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Emerging (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Installing (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Emerging (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Installing (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Emerging (4 of 4) dev-python/six-1.11.0::gentoo
>>> Installing (4 of 4) dev-python/six-1.11.0::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot net-misc/wget sys-apps/diffutils sys-apps/findutils app-arch/gzip sys-apps/net-tools virtual/shadow app-arch/tar app-arch/bzip2 sys-apps/coreutils sys-apps/baselayout sys-apps/portage sys-devel/patch virtual/pkgconfig sys-devel/autoconf sys-devel/flex sys-apps/file sys-devel/gettext sys-apps/grep sys-devel/make virtual/libc sys-apps/less virtual/editor sys-devel/binutils net-misc/rsync sys-devel/automake app-shells/bash:0 sys-devel/libtool sys-apps/gawk sys-devel/gnuconfig sys-apps/sed sys-apps/makedev sys-devel/gcc virtual/os-headers sys-devel/bison app-arch/xz-utils sys-apps/which
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by sys-devel/automake-1.15.1-r2::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-apps/sandbox-2.13 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by sys-devel/automake-1.15.1-r2::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=app-misc/pax-utils-1.2.3-r1 ~s390
# required by virtual/shadow-0::gentoo
# required by @system
# required by @world (argument)
=sys-apps/shadow-4.5-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180413T071219Z/.catalyst_lock'
Command exited with non-zero status 1
82.15user 21.18system 1:51.52elapsed 92%CPU (0avgtext+0avgdata 228224maxresident)k
0inputs+0outputs (749major+7306986minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180413T071219Z.6hBY0I/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-14 7:16 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-14 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180414T071215Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180414T071215Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180414T071215Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180414T071215Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180414T071215Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180414T071215Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180414T071215Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180414T071215Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Emerging (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Installing (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Emerging (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Installing (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Emerging (4 of 4) dev-python/six-1.11.0::gentoo
>>> Installing (4 of 4) dev-python/six-1.11.0::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot virtual/editor sys-devel/flex virtual/pkgconfig sys-apps/file app-arch/xz-utils sys-devel/patch app-arch/gzip sys-apps/findutils sys-devel/libtool sys-devel/gnuconfig virtual/shadow sys-devel/gettext virtual/os-headers sys-apps/coreutils net-misc/wget sys-devel/autoconf sys-apps/baselayout app-arch/tar net-misc/rsync virtual/libc sys-apps/less sys-apps/portage sys-devel/bison sys-devel/make sys-devel/gcc sys-apps/sed sys-apps/diffutils sys-apps/makedev app-arch/bzip2 sys-devel/binutils sys-apps/which sys-apps/net-tools sys-apps/grep sys-apps/gawk app-shells/bash:0 sys-devel/automake
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=app-misc/pax-utils-1.2.3-r1 ~s390
# required by virtual/shadow-0::gentoo
# required by virtual/shadow (argument)
=sys-apps/shadow-4.5-r1 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=sys-apps/sandbox-2.13 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180414T071215Z/.catalyst_lock'
Command exited with non-zero status 1
81.14user 20.34system 1:48.39elapsed 93%CPU (0avgtext+0avgdata 227504maxresident)k
0inputs+0outputs (754major+7294801minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180414T071215Z.iRH945/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-15 7:16 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-15 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180415T071142Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180415T071142Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180415T071142Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180415T071142Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180415T071142Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180415T071142Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Emerging (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Installing (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Emerging (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Installing (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Emerging (4 of 4) dev-python/six-1.11.0::gentoo
>>> Installing (4 of 4) dev-python/six-1.11.0::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/gawk sys-apps/net-tools sys-devel/make app-arch/bzip2 sys-apps/makedev app-shells/bash:0 sys-devel/autoconf sys-apps/findutils net-misc/wget sys-devel/libtool sys-devel/gettext virtual/pkgconfig app-arch/xz-utils sys-apps/coreutils app-arch/tar sys-apps/grep sys-devel/gcc sys-apps/baselayout sys-apps/sed app-arch/gzip sys-apps/portage sys-devel/automake virtual/editor virtual/shadow sys-devel/bison sys-apps/file sys-apps/less net-misc/rsync sys-devel/gnuconfig virtual/libc sys-apps/which virtual/os-headers sys-devel/flex sys-apps/diffutils sys-devel/binutils sys-devel/patch
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by virtual/shadow-0::gentoo
# required by @system
# required by @world (argument)
=sys-apps/shadow-4.5-r1 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by sys-devel/autoconf-2.69-r4::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=app-misc/pax-utils-1.2.3-r1 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by sys-devel/autoconf-2.69-r4::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-apps/sandbox-2.13 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180415T071142Z/.catalyst_lock'
Command exited with non-zero status 1
80.70user 20.93system 1:51.85elapsed 90%CPU (0avgtext+0avgdata 227904maxresident)k
0inputs+0outputs (757major+7288694minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180415T071142Z.S6D8zk/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-16 7:16 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-16 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180416T071241Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180416T071241Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180416T071241Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180416T071241Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180416T071241Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180416T071241Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Emerging (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Installing (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Emerging (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Installing (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Emerging (4 of 4) dev-python/six-1.11.0::gentoo
>>> Installing (4 of 4) dev-python/six-1.11.0::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-arch/tar sys-apps/coreutils sys-devel/binutils sys-apps/file net-misc/rsync sys-devel/bison virtual/shadow sys-devel/autoconf sys-apps/net-tools sys-devel/gnuconfig sys-devel/automake sys-devel/flex sys-apps/grep app-shells/bash:0 virtual/editor sys-devel/make virtual/pkgconfig app-arch/bzip2 app-arch/xz-utils sys-devel/gettext sys-apps/makedev sys-apps/sed app-arch/gzip sys-devel/libtool sys-apps/less sys-apps/findutils sys-apps/gawk sys-apps/baselayout sys-apps/portage sys-apps/diffutils sys-devel/patch virtual/os-headers net-misc/wget sys-devel/gcc virtual/libc sys-apps/which
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by virtual/shadow-0::gentoo
# required by virtual/shadow (argument)
=sys-apps/shadow-4.5-r1 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by sys-devel/automake-1.15.1-r2::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=app-misc/pax-utils-1.2.3-r1 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by sys-devel/automake-1.15.1-r2::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-apps/sandbox-2.13 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180416T071241Z/.catalyst_lock'
Command exited with non-zero status 1
80.58user 20.43system 1:49.27elapsed 92%CPU (0avgtext+0avgdata 225616maxresident)k
0inputs+0outputs (758major+7298226minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180416T071241Z.bZuqwP/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-17 7:16 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-17 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180417T071211Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180417T071211Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180417T071211Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180417T071211Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180417T071211Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180417T071211Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 5) app-eselect/eselect-python-20171204::gentoo
>>> Installing (1 of 5) app-eselect/eselect-python-20171204::gentoo
>>> Emerging (2 of 5) sys-apps/portage-2.3.8::gentoo
>>> Installing (2 of 5) sys-apps/portage-2.3.8::gentoo
>>> Emerging (3 of 5) sys-devel/automake-1.15.1-r2::gentoo
>>> Installing (3 of 5) sys-devel/automake-1.15.1-r2::gentoo
>>> Emerging (4 of 5) dev-python/setuptools-34.0.2-r1::gentoo
>>> Installing (4 of 5) dev-python/setuptools-34.0.2-r1::gentoo
>>> Emerging (5 of 5) dev-python/six-1.11.0::gentoo
>>> Installing (5 of 5) dev-python/six-1.11.0::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/findutils sys-apps/which sys-devel/flex sys-apps/less virtual/editor virtual/pkgconfig sys-devel/gettext app-arch/bzip2 sys-apps/gawk sys-apps/coreutils sys-apps/diffutils sys-apps/portage sys-devel/autoconf app-shells/bash:0 sys-devel/gcc virtual/os-headers sys-apps/net-tools app-arch/tar net-misc/rsync sys-devel/make net-misc/wget sys-devel/gnuconfig sys-apps/sed sys-devel/libtool sys-apps/baselayout virtual/libc sys-devel/automake sys-apps/grep sys-devel/bison sys-apps/file app-arch/xz-utils app-arch/gzip sys-devel/binutils sys-devel/patch sys-apps/makedev virtual/shadow
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by sys-devel/autoconf-2.69-r4::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=app-misc/pax-utils-1.2.3-r1 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by sys-devel/autoconf-2.69-r4::gentoo
# required by sys-devel/libtool-2.4.6-r3::gentoo
# required by sys-devel/libtool (argument)
=sys-apps/sandbox-2.13 ~s390
# required by virtual/shadow-0::gentoo
# required by virtual/shadow (argument)
=sys-apps/shadow-4.5-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180417T071211Z/.catalyst_lock'
Command exited with non-zero status 1
84.09user 21.77system 1:55.52elapsed 91%CPU (0avgtext+0avgdata 223696maxresident)k
0inputs+0outputs (860major+7825747minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180417T071211Z.YEspEV/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-18 7:28 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-18 7:28 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 19) sys-libs/ncurses-6.1-r2::gentoo
>>> Installing (1 of 19) sys-libs/ncurses-6.1-r2::gentoo
>>> Emerging (2 of 19) app-eselect/eselect-python-20171204::gentoo
>>> Installing (2 of 19) app-eselect/eselect-python-20171204::gentoo
>>> Emerging (3 of 19) sys-apps/less-529::gentoo
>>> Installing (3 of 19) sys-apps/less-529::gentoo
>>> Emerging (4 of 19) sys-libs/readline-6.3_p8-r3::gentoo
>>> Installing (4 of 19) sys-libs/readline-6.3_p8-r3::gentoo
>>> Emerging (5 of 19) sys-process/procps-3.3.12::gentoo
>>> Installing (5 of 19) sys-process/procps-3.3.12::gentoo
>>> Emerging (6 of 19) app-shells/bash-4.3_p48-r1::gentoo
>>> Installing (6 of 19) app-shells/bash-4.3_p48-r1::gentoo
>>> Emerging (7 of 19) sys-devel/gettext-0.19.8.1::gentoo
>>> Installing (7 of 19) sys-devel/gettext-0.19.8.1::gentoo
>>> Emerging (8 of 19) sys-apps/util-linux-2.30.2-r1::gentoo
>>> Installing (8 of 19) sys-apps/util-linux-2.30.2-r1::gentoo
>>> Emerging (9 of 19) app-editors/nano-2.8.7::gentoo
>>> Installing (9 of 19) app-editors/nano-2.8.7::gentoo
>>> Emerging (10 of 19) sys-apps/texinfo-6.3::gentoo
>>> Installing (10 of 19) sys-apps/texinfo-6.3::gentoo
>>> Emerging (11 of 19) sys-apps/s390-tools-1.36.1-r1::gentoo
>>> Installing (11 of 19) sys-apps/s390-tools-1.36.1-r1::gentoo
>>> Emerging (12 of 19) sys-devel/automake-1.15.1-r2::gentoo
>>> Installing (12 of 19) sys-devel/automake-1.15.1-r2::gentoo
>>> Emerging (13 of 19) sys-process/psmisc-22.21-r3::gentoo
>>> Installing (13 of 19) sys-process/psmisc-22.21-r3::gentoo
>>> Emerging (14 of 19) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (14 of 19) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (15 of 19) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (15 of 19) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (16 of 19) sys-apps/portage-2.3.8::gentoo
>>> Installing (16 of 19) sys-apps/portage-2.3.8::gentoo
>>> Emerging (17 of 19) sys-apps/openrc-0.34.11::gentoo
>>> Installing (17 of 19) sys-apps/openrc-0.34.11::gentoo
>>> Emerging (18 of 19) dev-python/setuptools-34.0.2-r1::gentoo
>>> Installing (18 of 19) dev-python/setuptools-34.0.2-r1::gentoo
>>> Emerging (19 of 19) dev-python/six-1.11.0::gentoo
>>> Installing (19 of 19) dev-python/six-1.11.0::gentoo
* Messages for package sys-apps/util-linux-2.30.2-r1:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-shells/bash:0 sys-apps/less sys-devel/libtool net-misc/rsync sys-apps/grep sys-devel/flex sys-devel/autoconf sys-devel/gettext sys-devel/gcc sys-apps/baselayout app-arch/gzip sys-devel/automake sys-devel/make sys-devel/binutils virtual/libc sys-apps/portage sys-devel/bison virtual/shadow sys-devel/patch sys-apps/file sys-devel/gnuconfig sys-apps/coreutils net-misc/wget virtual/editor sys-apps/makedev app-arch/tar virtual/pkgconfig sys-apps/sed sys-apps/diffutils virtual/os-headers sys-apps/net-tools app-arch/bzip2 app-arch/xz-utils sys-apps/findutils sys-apps/which sys-apps/gawk
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=sys-apps/sandbox-2.13 ~s390
# required by virtual/shadow-0::gentoo
# required by @system
# required by @world (argument)
=sys-apps/shadow-4.5-r1 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=app-misc/pax-utils-1.2.3-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180418T071236Z/.catalyst_lock'
Command exited with non-zero status 1
805.26user 267.26system 14:00.69elapsed 127%CPU (0avgtext+0avgdata 477968maxresident)k
0inputs+0outputs (872major+133151039minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180418T071236Z.ritC1C/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-19 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-19 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage1.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180419T071218Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180419T071218Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180419T071218Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180419T071218Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180419T071218Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180419T071218Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180419T071218Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180419T071218Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180419T071218Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180419T071218Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180419T071218Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
!!! catalyst: Could not copy envscript into place.
/proc is still mounted; performing auto-bind-umount... Auto-unbind successful...
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1018, in chroot_setup
"Could not copy envscript into place.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180419T071218Z/.catalyst_lock'
Command exited with non-zero status 1
23.69user 5.02system 0:31.33elapsed 91%CPU (0avgtext+0avgdata 154448maxresident)k
0inputs+0outputs (66major+1028275minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180419T071218Z.fT8omN/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-20 7:28 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-20 7:28 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 19) sys-libs/ncurses-6.1-r2::gentoo
>>> Installing (1 of 19) sys-libs/ncurses-6.1-r2::gentoo
>>> Emerging (2 of 19) app-eselect/eselect-python-20171204::gentoo
>>> Installing (2 of 19) app-eselect/eselect-python-20171204::gentoo
>>> Emerging (3 of 19) sys-apps/less-529::gentoo
>>> Installing (3 of 19) sys-apps/less-529::gentoo
>>> Emerging (4 of 19) sys-libs/readline-6.3_p8-r3::gentoo
>>> Installing (4 of 19) sys-libs/readline-6.3_p8-r3::gentoo
>>> Emerging (5 of 19) sys-process/procps-3.3.12::gentoo
>>> Installing (5 of 19) sys-process/procps-3.3.12::gentoo
>>> Emerging (6 of 19) app-shells/bash-4.3_p48-r1::gentoo
>>> Installing (6 of 19) app-shells/bash-4.3_p48-r1::gentoo
>>> Emerging (7 of 19) sys-devel/gettext-0.19.8.1::gentoo
>>> Installing (7 of 19) sys-devel/gettext-0.19.8.1::gentoo
>>> Emerging (8 of 19) sys-apps/util-linux-2.30.2-r1::gentoo
>>> Installing (8 of 19) sys-apps/util-linux-2.30.2-r1::gentoo
>>> Emerging (9 of 19) app-editors/nano-2.8.7::gentoo
>>> Installing (9 of 19) app-editors/nano-2.8.7::gentoo
>>> Emerging (10 of 19) sys-apps/texinfo-6.3::gentoo
>>> Installing (10 of 19) sys-apps/texinfo-6.3::gentoo
>>> Emerging (11 of 19) sys-apps/s390-tools-1.36.1-r1::gentoo
>>> Installing (11 of 19) sys-apps/s390-tools-1.36.1-r1::gentoo
>>> Emerging (12 of 19) sys-devel/automake-1.15.1-r2::gentoo
>>> Installing (12 of 19) sys-devel/automake-1.15.1-r2::gentoo
>>> Emerging (13 of 19) sys-process/psmisc-22.21-r3::gentoo
>>> Installing (13 of 19) sys-process/psmisc-22.21-r3::gentoo
>>> Emerging (14 of 19) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (14 of 19) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (15 of 19) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (15 of 19) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (16 of 19) sys-apps/portage-2.3.8::gentoo
>>> Installing (16 of 19) sys-apps/portage-2.3.8::gentoo
>>> Emerging (17 of 19) sys-apps/openrc-0.34.11::gentoo
>>> Installing (17 of 19) sys-apps/openrc-0.34.11::gentoo
>>> Emerging (18 of 19) dev-python/setuptools-34.0.2-r1::gentoo
>>> Installing (18 of 19) dev-python/setuptools-34.0.2-r1::gentoo
>>> Emerging (19 of 19) dev-python/six-1.11.0::gentoo
>>> Installing (19 of 19) dev-python/six-1.11.0::gentoo
* Messages for package sys-apps/util-linux-2.30.2-r1:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/gnuconfig sys-devel/flex sys-apps/findutils app-arch/gzip sys-apps/coreutils net-misc/rsync sys-apps/sed sys-devel/binutils app-arch/tar sys-apps/gawk virtual/shadow sys-apps/less sys-apps/which virtual/os-headers app-arch/bzip2 sys-apps/diffutils sys-devel/libtool sys-apps/file sys-devel/autoconf app-arch/xz-utils sys-apps/grep virtual/editor sys-devel/bison virtual/libc net-misc/wget sys-devel/gcc sys-devel/automake sys-apps/baselayout sys-apps/net-tools sys-devel/patch sys-devel/make virtual/pkgconfig sys-apps/portage sys-devel/gettext sys-apps/makedev app-shells/bash:0
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=sys-apps/sandbox-2.13 ~s390
# required by virtual/shadow-0::gentoo
# required by virtual/shadow (argument)
=sys-apps/shadow-4.5-r1 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=app-misc/pax-utils-1.2.3-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180420T071208Z/.catalyst_lock'
Command exited with non-zero status 1
803.00user 249.58system 13:40.99elapsed 128%CPU (0avgtext+0avgdata 477952maxresident)k
0inputs+0outputs (876major+133187616minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180420T071208Z.2MKGjh/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-21 7:28 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-21 7:28 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180421T071222Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 19) sys-libs/ncurses-6.1-r2::gentoo
>>> Installing (1 of 19) sys-libs/ncurses-6.1-r2::gentoo
>>> Emerging (2 of 19) app-eselect/eselect-python-20171204::gentoo
>>> Installing (2 of 19) app-eselect/eselect-python-20171204::gentoo
>>> Emerging (3 of 19) sys-apps/less-529::gentoo
>>> Installing (3 of 19) sys-apps/less-529::gentoo
>>> Emerging (4 of 19) sys-libs/readline-6.3_p8-r3::gentoo
>>> Installing (4 of 19) sys-libs/readline-6.3_p8-r3::gentoo
>>> Emerging (5 of 19) sys-process/procps-3.3.12::gentoo
>>> Installing (5 of 19) sys-process/procps-3.3.12::gentoo
>>> Emerging (6 of 19) app-shells/bash-4.3_p48-r1::gentoo
>>> Installing (6 of 19) app-shells/bash-4.3_p48-r1::gentoo
>>> Emerging (7 of 19) sys-devel/gettext-0.19.8.1::gentoo
>>> Installing (7 of 19) sys-devel/gettext-0.19.8.1::gentoo
>>> Emerging (8 of 19) sys-apps/util-linux-2.30.2-r1::gentoo
>>> Installing (8 of 19) sys-apps/util-linux-2.30.2-r1::gentoo
>>> Emerging (9 of 19) sys-apps/texinfo-6.3::gentoo
>>> Installing (9 of 19) sys-apps/texinfo-6.3::gentoo
>>> Emerging (10 of 19) app-editors/nano-2.8.7::gentoo
>>> Installing (10 of 19) app-editors/nano-2.8.7::gentoo
>>> Emerging (11 of 19) sys-apps/s390-tools-1.36.1-r1::gentoo
>>> Installing (11 of 19) sys-apps/s390-tools-1.36.1-r1::gentoo
>>> Emerging (12 of 19) sys-devel/automake-1.15.1-r2::gentoo
>>> Installing (12 of 19) sys-devel/automake-1.15.1-r2::gentoo
>>> Emerging (13 of 19) sys-process/psmisc-22.21-r3::gentoo
>>> Installing (13 of 19) sys-process/psmisc-22.21-r3::gentoo
>>> Emerging (14 of 19) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (14 of 19) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (15 of 19) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (15 of 19) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (16 of 19) sys-apps/portage-2.3.8::gentoo
>>> Installing (16 of 19) sys-apps/portage-2.3.8::gentoo
>>> Emerging (17 of 19) sys-apps/openrc-0.34.11::gentoo
>>> Installing (17 of 19) sys-apps/openrc-0.34.11::gentoo
>>> Emerging (18 of 19) dev-python/setuptools-34.0.2-r1::gentoo
>>> Installing (18 of 19) dev-python/setuptools-34.0.2-r1::gentoo
>>> Emerging (19 of 19) dev-python/six-1.11.0::gentoo
>>> Installing (19 of 19) dev-python/six-1.11.0::gentoo
* Messages for package sys-apps/util-linux-2.30.2-r1:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot virtual/pkgconfig app-arch/tar sys-devel/patch net-misc/rsync sys-apps/less virtual/os-headers sys-devel/binutils sys-devel/gettext net-misc/wget sys-apps/portage virtual/editor sys-apps/diffutils sys-devel/gnuconfig virtual/libc sys-devel/autoconf app-shells/bash:0 sys-apps/sed sys-apps/grep app-arch/gzip sys-devel/make sys-devel/libtool sys-apps/gawk sys-apps/net-tools sys-apps/which app-arch/xz-utils sys-devel/bison sys-apps/file sys-devel/gcc virtual/shadow sys-apps/coreutils sys-devel/flex sys-apps/findutils app-arch/bzip2 sys-apps/makedev sys-apps/baselayout sys-devel/automake
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=sys-apps/sandbox-2.13 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=app-misc/pax-utils-1.2.3-r1 ~s390
# required by virtual/shadow-0::gentoo
# required by virtual/shadow (argument)
=sys-apps/shadow-4.5-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180421T071222Z/.catalyst_lock'
Command exited with non-zero status 1
807.45user 254.61system 13:46.73elapsed 128%CPU (0avgtext+0avgdata 478128maxresident)k
0inputs+0outputs (861major+133245308minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180421T071222Z.4bH5gC/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-22 8:23 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-22 8:23 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* Removing dead symlink //usr/share/man/man1/xsubpp.1.bz2
* Removing dead symlink //usr/share/man/man1/zipdetails.1.bz2
* Removing dead symlink //usr/share/man/man1/json_pp.1.bz2
* Removing dead symlink //usr/share/man/man1/corelist.1.bz2
* Removing dead symlink //usr/share/man/man1/pod2usage.1.bz2
* Removing dead symlink //usr/share/man/man1/podchecker.1.bz2
* Removing dead symlink //usr/share/man/man1/podselect.1.bz2
* Removing dead symlink //usr/share/man/man1/perldoc.1.bz2
* Removing dead symlink //usr/share/man/man1/prove.1.bz2
* Removing dead symlink //usr/share/man/man1/pod2man.1.bz2
* Removing dead symlink //usr/share/man/man1/pod2text.1.bz2
* Removing dead symlink //usr/share/man/man1/perlpodstyle.1.bz2
* Messages for package dev-lang/perl-5.24.3-r1:
* Unable to establish //usr/share/man/man1/ptar.1* symlink
* Unable to establish //usr/share/man/man1/ptardiff.1* symlink
* Unable to establish //usr/share/man/man1/ptargrep.1* symlink
* Unable to establish //usr/share/man/man1/cpan.1* symlink
* Unable to establish //usr/share/man/man1/shasum.1* symlink
* Unable to establish //usr/share/man/man1/enc2xs.1* symlink
* Unable to establish //usr/share/man/man1/piconv.1* symlink
* Unable to establish //usr/share/man/man1/instmodsh.1* symlink
* Unable to establish //usr/share/man/man1/xsubpp.1* symlink
* Unable to establish //usr/share/man/man1/zipdetails.1* symlink
* Unable to establish //usr/share/man/man1/json_pp.1* symlink
* Unable to establish //usr/share/man/man1/corelist.1* symlink
* Unable to establish //usr/share/man/man1/pod2usage.1* symlink
* Unable to establish //usr/share/man/man1/podchecker.1* symlink
* Unable to establish //usr/share/man/man1/podselect.1* symlink
* Unable to establish //usr/share/man/man1/perldoc.1* symlink
* Unable to establish //usr/share/man/man1/prove.1* symlink
* Unable to establish //usr/share/man/man1/pod2man.1* symlink
* Unable to establish //usr/share/man/man1/pod2text.1* symlink
* Unable to establish //usr/share/man/man1/perlpodstyle.1* symlink
* Messages for package sys-libs/pam-1.2.1-r2:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-apps/util-linux-2.30.2-r1:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot net-misc/wget virtual/os-headers virtual/shadow sys-apps/baselayout app-arch/gzip sys-apps/less sys-apps/sed sys-apps/which sys-devel/gettext sys-devel/libtool sys-apps/coreutils net-misc/rsync sys-apps/findutils sys-devel/patch sys-apps/grep app-arch/bzip2 sys-apps/diffutils sys-devel/gnuconfig virtual/libc virtual/pkgconfig app-shells/bash:0 sys-apps/gawk app-arch/xz-utils sys-devel/autoconf virtual/editor sys-devel/make sys-devel/binutils sys-apps/makedev sys-apps/file app-arch/tar sys-apps/net-tools sys-devel/bison sys-devel/automake sys-devel/flex sys-devel/gcc sys-apps/portage
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.11 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r10 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3-r1::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=sys-apps/sandbox-2.13 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3-r1::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=app-misc/pax-utils-1.2.3-r1 ~s390
# required by virtual/shadow-0::gentoo
# required by @system
# required by @world (argument)
=sys-apps/shadow-4.5-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180422T071129Z/.catalyst_lock'
Command exited with non-zero status 1
6072.43user 920.41system 1:09:16elapsed 168%CPU (0avgtext+0avgdata 2572288maxresident)k
0inputs+0outputs (2796major+400507975minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180422T071129Z.e1CSFI/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-23 8:23 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-23 8:23 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* Removing dead symlink //usr/share/man/man1/prove.1.bz2
* Removing dead symlink //usr/share/man/man1/pod2man.1.bz2
* Removing dead symlink //usr/share/man/man1/pod2text.1.bz2
* Removing dead symlink //usr/share/man/man1/perlpodstyle.1.bz2
* Messages for package dev-lang/perl-5.24.3-r1:
* Unable to establish //usr/share/man/man1/ptar.1* symlink
* Unable to establish //usr/share/man/man1/ptardiff.1* symlink
* Unable to establish //usr/share/man/man1/ptargrep.1* symlink
* Unable to establish //usr/share/man/man1/cpan.1* symlink
* Unable to establish //usr/share/man/man1/shasum.1* symlink
* Unable to establish //usr/share/man/man1/enc2xs.1* symlink
* Unable to establish //usr/share/man/man1/piconv.1* symlink
* Unable to establish //usr/share/man/man1/instmodsh.1* symlink
* Unable to establish //usr/share/man/man1/xsubpp.1* symlink
* Unable to establish //usr/share/man/man1/zipdetails.1* symlink
* Unable to establish //usr/share/man/man1/json_pp.1* symlink
* Unable to establish //usr/share/man/man1/corelist.1* symlink
* Unable to establish //usr/share/man/man1/pod2usage.1* symlink
* Unable to establish //usr/share/man/man1/podchecker.1* symlink
* Unable to establish //usr/share/man/man1/podselect.1* symlink
* Unable to establish //usr/share/man/man1/perldoc.1* symlink
* Unable to establish //usr/share/man/man1/prove.1* symlink
* Unable to establish //usr/share/man/man1/pod2man.1* symlink
* Unable to establish //usr/share/man/man1/pod2text.1* symlink
* Unable to establish //usr/share/man/man1/perlpodstyle.1* symlink
* Messages for package sys-libs/pam-1.2.1-r2:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package app-misc/ca-certificates-20170717.3.36.1:
* To prevent applications relying on system's trusted root certificate store
* from using CAs where at least one major browser vendor Gentoo is following
* has decided to apply trust level restrictions, the following
* certificate(s) were removed:
*
* Messages for package sys-apps/util-linux-2.30.2-r1:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-arch/bzip2 sys-devel/flex sys-devel/gettext sys-devel/bison virtual/os-headers virtual/pkgconfig sys-apps/findutils sys-devel/make virtual/editor sys-devel/patch app-shells/bash:0 sys-apps/gawk sys-apps/portage sys-devel/autoconf sys-devel/binutils net-misc/rsync sys-apps/sed app-arch/gzip sys-apps/diffutils sys-apps/makedev app-arch/tar sys-devel/libtool net-misc/wget sys-devel/gcc sys-apps/which sys-apps/grep sys-apps/coreutils virtual/shadow sys-apps/less sys-devel/gnuconfig virtual/libc app-arch/xz-utils sys-devel/automake sys-apps/file sys-apps/baselayout sys-apps/net-tools
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.11 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r10 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3-r1::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=app-misc/pax-utils-1.2.3-r1 ~s390
# required by virtual/shadow-0::gentoo
# required by @system
# required by @world (argument)
=sys-apps/shadow-4.5-r1 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3-r1::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=sys-apps/sandbox-2.13 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180423T071226Z/.catalyst_lock'
Command exited with non-zero status 1
6078.47user 904.00system 1:08:58elapsed 168%CPU (0avgtext+0avgdata 2572288maxresident)k
0inputs+0outputs (2793major+401978974minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180423T071226Z.0ieuwI/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-24 8:24 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-24 8:24 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* Removing dead symlink //usr/share/man/man1/perldoc.1.bz2
* Removing dead symlink //usr/share/man/man1/prove.1.bz2
* Removing dead symlink //usr/share/man/man1/pod2man.1.bz2
* Removing dead symlink //usr/share/man/man1/pod2text.1.bz2
* Removing dead symlink //usr/share/man/man1/perlpodstyle.1.bz2
* Messages for package dev-lang/perl-5.24.3-r1:
* Unable to establish //usr/share/man/man1/ptar.1* symlink
* Unable to establish //usr/share/man/man1/ptardiff.1* symlink
* Unable to establish //usr/share/man/man1/ptargrep.1* symlink
* Unable to establish //usr/share/man/man1/cpan.1* symlink
* Unable to establish //usr/share/man/man1/shasum.1* symlink
* Unable to establish //usr/share/man/man1/enc2xs.1* symlink
* Unable to establish //usr/share/man/man1/piconv.1* symlink
* Unable to establish //usr/share/man/man1/instmodsh.1* symlink
* Unable to establish //usr/share/man/man1/xsubpp.1* symlink
* Unable to establish //usr/share/man/man1/zipdetails.1* symlink
* Unable to establish //usr/share/man/man1/json_pp.1* symlink
* Unable to establish //usr/share/man/man1/corelist.1* symlink
* Unable to establish //usr/share/man/man1/pod2usage.1* symlink
* Unable to establish //usr/share/man/man1/podchecker.1* symlink
* Unable to establish //usr/share/man/man1/podselect.1* symlink
* Unable to establish //usr/share/man/man1/perldoc.1* symlink
* Unable to establish //usr/share/man/man1/prove.1* symlink
* Unable to establish //usr/share/man/man1/pod2man.1* symlink
* Unable to establish //usr/share/man/man1/pod2text.1* symlink
* Unable to establish //usr/share/man/man1/perlpodstyle.1* symlink
* Messages for package sys-libs/pam-1.2.1-r2:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package app-misc/ca-certificates-20170717.3.36.1:
* To prevent applications relying on system's trusted root certificate store
* from using CAs where at least one major browser vendor Gentoo is following
* has decided to apply trust level restrictions, the following
* certificate(s) were removed:
*
* Messages for package sys-apps/util-linux-2.30.2-r1:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot virtual/pkgconfig app-shells/bash:0 sys-devel/automake app-arch/gzip sys-devel/gcc sys-apps/findutils virtual/libc sys-apps/file sys-apps/diffutils sys-apps/gawk sys-apps/net-tools sys-devel/binutils sys-devel/gettext sys-apps/less sys-apps/coreutils sys-apps/makedev sys-apps/which sys-apps/baselayout sys-devel/gnuconfig sys-devel/libtool net-misc/wget sys-devel/make sys-devel/patch app-arch/xz-utils sys-devel/bison virtual/shadow sys-apps/portage sys-devel/flex sys-apps/sed app-arch/tar app-arch/bzip2 sys-devel/autoconf net-misc/rsync virtual/editor sys-apps/grep virtual/os-headers
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.11 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r10 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by virtual/shadow-0::gentoo
# required by virtual/shadow (argument)
=sys-apps/shadow-4.5-r1 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3-r1::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo
=app-misc/pax-utils-1.2.3-r1 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3-r1::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo
=sys-apps/sandbox-2.13 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180424T071209Z/.catalyst_lock'
Command exited with non-zero status 1
6126.70user 910.20system 1:09:53elapsed 167%CPU (0avgtext+0avgdata 2572288maxresident)k
0inputs+0outputs (2828major+402826957minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180424T071209Z.NWzTLz/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-25 8:24 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-25 8:24 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* Removing dead symlink //usr/share/man/man1/pod2text.1.bz2
* Removing dead symlink //usr/share/man/man1/perlpodstyle.1.bz2
* Messages for package dev-lang/perl-5.24.3-r1:
* Unable to establish //usr/share/man/man1/ptar.1* symlink
* Unable to establish //usr/share/man/man1/ptardiff.1* symlink
* Unable to establish //usr/share/man/man1/ptargrep.1* symlink
* Unable to establish //usr/share/man/man1/cpan.1* symlink
* Unable to establish //usr/share/man/man1/shasum.1* symlink
* Unable to establish //usr/share/man/man1/enc2xs.1* symlink
* Unable to establish //usr/share/man/man1/piconv.1* symlink
* Unable to establish //usr/share/man/man1/instmodsh.1* symlink
* Unable to establish //usr/share/man/man1/xsubpp.1* symlink
* Unable to establish //usr/share/man/man1/zipdetails.1* symlink
* Unable to establish //usr/share/man/man1/json_pp.1* symlink
* Unable to establish //usr/share/man/man1/corelist.1* symlink
* Unable to establish //usr/share/man/man1/pod2usage.1* symlink
* Unable to establish //usr/share/man/man1/podchecker.1* symlink
* Unable to establish //usr/share/man/man1/podselect.1* symlink
* Unable to establish //usr/share/man/man1/perldoc.1* symlink
* Unable to establish //usr/share/man/man1/prove.1* symlink
* Unable to establish //usr/share/man/man1/pod2man.1* symlink
* Unable to establish //usr/share/man/man1/pod2text.1* symlink
* Unable to establish //usr/share/man/man1/perlpodstyle.1* symlink
* Messages for package sys-libs/pam-1.2.1-r2:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package app-misc/ca-certificates-20170717.3.36.1:
* To prevent applications relying on system's trusted root certificate store
* from using CAs where at least one major browser vendor Gentoo is following
* has decided to apply trust level restrictions, the following
* certificate(s) were removed:
*
* Messages for package sys-apps/util-linux-2.30.2-r1:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-shells/bash:0 sys-devel/autoconf net-misc/rsync sys-devel/gcc sys-devel/gettext sys-apps/net-tools sys-apps/portage sys-devel/binutils sys-apps/gawk sys-devel/libtool sys-apps/diffutils sys-devel/bison sys-devel/gnuconfig sys-apps/findutils net-misc/wget sys-apps/sed sys-apps/baselayout sys-apps/coreutils app-arch/xz-utils virtual/os-headers virtual/editor sys-apps/which app-arch/tar sys-devel/automake sys-devel/patch app-arch/bzip2 virtual/pkgconfig sys-devel/flex sys-apps/makedev virtual/shadow app-arch/gzip sys-apps/file sys-apps/grep sys-apps/less sys-devel/make virtual/libc
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.11 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r10 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3-r1::gentoo
# required by perl-core/File-Path-2.130.0::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=app-misc/pax-utils-1.2.3-r1 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3-r1::gentoo
# required by perl-core/File-Path-2.130.0::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=sys-apps/sandbox-2.13 ~s390
# required by virtual/shadow-0::gentoo
# required by @system
# required by @world (argument)
=sys-apps/shadow-4.5-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180425T071225Z/.catalyst_lock'
Command exited with non-zero status 1
6119.89user 907.48system 1:09:47elapsed 167%CPU (0avgtext+0avgdata 2572288maxresident)k
0inputs+0outputs (2792major+402718175minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180425T071225Z.zVgW3Y/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-26 8:25 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-26 8:25 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* Removing dead symlink //usr/share/man/man1/prove.1.bz2
* Removing dead symlink //usr/share/man/man1/pod2man.1.bz2
* Removing dead symlink //usr/share/man/man1/pod2text.1.bz2
* Removing dead symlink //usr/share/man/man1/perlpodstyle.1.bz2
* Messages for package dev-lang/perl-5.24.3-r1:
* Unable to establish //usr/share/man/man1/ptar.1* symlink
* Unable to establish //usr/share/man/man1/ptardiff.1* symlink
* Unable to establish //usr/share/man/man1/ptargrep.1* symlink
* Unable to establish //usr/share/man/man1/cpan.1* symlink
* Unable to establish //usr/share/man/man1/shasum.1* symlink
* Unable to establish //usr/share/man/man1/enc2xs.1* symlink
* Unable to establish //usr/share/man/man1/piconv.1* symlink
* Unable to establish //usr/share/man/man1/instmodsh.1* symlink
* Unable to establish //usr/share/man/man1/xsubpp.1* symlink
* Unable to establish //usr/share/man/man1/zipdetails.1* symlink
* Unable to establish //usr/share/man/man1/json_pp.1* symlink
* Unable to establish //usr/share/man/man1/corelist.1* symlink
* Unable to establish //usr/share/man/man1/pod2usage.1* symlink
* Unable to establish //usr/share/man/man1/podchecker.1* symlink
* Unable to establish //usr/share/man/man1/podselect.1* symlink
* Unable to establish //usr/share/man/man1/perldoc.1* symlink
* Unable to establish //usr/share/man/man1/prove.1* symlink
* Unable to establish //usr/share/man/man1/pod2man.1* symlink
* Unable to establish //usr/share/man/man1/pod2text.1* symlink
* Unable to establish //usr/share/man/man1/perlpodstyle.1* symlink
* Messages for package sys-libs/pam-1.2.1-r2:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package app-misc/ca-certificates-20170717.3.36.1:
* To prevent applications relying on system's trusted root certificate store
* from using CAs where at least one major browser vendor Gentoo is following
* has decided to apply trust level restrictions, the following
* certificate(s) were removed:
*
* Messages for package sys-apps/util-linux-2.30.2-r1:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-shells/bash:0 sys-apps/gawk virtual/editor sys-apps/baselayout app-arch/gzip sys-apps/sed net-misc/wget sys-apps/coreutils virtual/pkgconfig sys-apps/grep virtual/libc sys-devel/make sys-apps/makedev sys-devel/gettext app-arch/tar sys-apps/diffutils sys-devel/bison net-misc/rsync sys-devel/patch app-arch/xz-utils sys-devel/libtool sys-devel/autoconf sys-apps/findutils sys-devel/binutils virtual/shadow app-arch/bzip2 sys-apps/which virtual/os-headers sys-apps/net-tools sys-apps/portage sys-apps/file sys-devel/gnuconfig sys-devel/automake sys-apps/less sys-devel/flex sys-devel/gcc
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.11 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r10 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=sys-apps/sandbox-2.13 ~s390
# required by virtual/shadow-0::gentoo
# required by @system
# required by @world (argument)
=sys-apps/shadow-4.5-r1 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=app-misc/pax-utils-1.2.3-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180426T071208Z/.catalyst_lock'
Command exited with non-zero status 1
6114.68user 908.23system 1:11:29elapsed 163%CPU (0avgtext+0avgdata 2572288maxresident)k
0inputs+0outputs (2784major+402613664minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180426T071208Z.S63ntB/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-27 8:26 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-27 8:26 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* Removing dead symlink //usr/share/man/man1/perldoc.1.bz2
* Removing dead symlink //usr/share/man/man1/prove.1.bz2
* Removing dead symlink //usr/share/man/man1/pod2man.1.bz2
* Removing dead symlink //usr/share/man/man1/pod2text.1.bz2
* Removing dead symlink //usr/share/man/man1/perlpodstyle.1.bz2
* Messages for package dev-lang/perl-5.24.3-r1:
* Unable to establish //usr/share/man/man1/ptar.1* symlink
* Unable to establish //usr/share/man/man1/ptardiff.1* symlink
* Unable to establish //usr/share/man/man1/ptargrep.1* symlink
* Unable to establish //usr/share/man/man1/cpan.1* symlink
* Unable to establish //usr/share/man/man1/shasum.1* symlink
* Unable to establish //usr/share/man/man1/enc2xs.1* symlink
* Unable to establish //usr/share/man/man1/piconv.1* symlink
* Unable to establish //usr/share/man/man1/instmodsh.1* symlink
* Unable to establish //usr/share/man/man1/xsubpp.1* symlink
* Unable to establish //usr/share/man/man1/zipdetails.1* symlink
* Unable to establish //usr/share/man/man1/json_pp.1* symlink
* Unable to establish //usr/share/man/man1/corelist.1* symlink
* Unable to establish //usr/share/man/man1/pod2usage.1* symlink
* Unable to establish //usr/share/man/man1/podchecker.1* symlink
* Unable to establish //usr/share/man/man1/podselect.1* symlink
* Unable to establish //usr/share/man/man1/perldoc.1* symlink
* Unable to establish //usr/share/man/man1/prove.1* symlink
* Unable to establish //usr/share/man/man1/pod2man.1* symlink
* Unable to establish //usr/share/man/man1/pod2text.1* symlink
* Unable to establish //usr/share/man/man1/perlpodstyle.1* symlink
* Messages for package sys-libs/pam-1.2.1-r2:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package app-misc/ca-certificates-20170717.3.36.1:
* To prevent applications relying on system's trusted root certificate store
* from using CAs where at least one major browser vendor Gentoo is following
* has decided to apply trust level restrictions, the following
* certificate(s) were removed:
*
* Messages for package sys-apps/util-linux-2.30.2-r1:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot virtual/editor sys-apps/gawk sys-apps/baselayout sys-apps/file sys-devel/automake app-arch/bzip2 sys-devel/make sys-apps/findutils app-arch/gzip virtual/pkgconfig sys-apps/less sys-apps/grep virtual/libc sys-devel/flex sys-apps/coreutils sys-apps/which net-misc/wget sys-apps/net-tools net-misc/rsync sys-devel/libtool sys-apps/sed sys-apps/makedev virtual/os-headers app-shells/bash:0 sys-devel/gcc sys-devel/autoconf sys-apps/portage sys-devel/binutils sys-devel/gnuconfig sys-devel/patch sys-devel/gettext virtual/shadow app-arch/xz-utils sys-devel/bison sys-apps/diffutils app-arch/tar
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.11 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r10 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3-r1::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=sys-apps/sandbox-2.13 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3-r1::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=app-misc/pax-utils-1.2.3-r1 ~s390
# required by virtual/shadow-0::gentoo
# required by virtual/shadow (argument)
=sys-apps/shadow-4.5-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180427T071213Z/.catalyst_lock'
Command exited with non-zero status 1
6113.13user 929.12system 1:11:44elapsed 163%CPU (0avgtext+0avgdata 2572288maxresident)k
0inputs+0outputs (2890major+402982848minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180427T071213Z.QcGIDm/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-28 8:24 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-28 8:24 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* Removing dead symlink //usr/share/man/man1/perldoc.1.bz2
* Removing dead symlink //usr/share/man/man1/prove.1.bz2
* Removing dead symlink //usr/share/man/man1/pod2man.1.bz2
* Removing dead symlink //usr/share/man/man1/pod2text.1.bz2
* Removing dead symlink //usr/share/man/man1/perlpodstyle.1.bz2
* Messages for package dev-lang/perl-5.24.3-r1:
* Unable to establish //usr/share/man/man1/ptar.1* symlink
* Unable to establish //usr/share/man/man1/ptardiff.1* symlink
* Unable to establish //usr/share/man/man1/ptargrep.1* symlink
* Unable to establish //usr/share/man/man1/cpan.1* symlink
* Unable to establish //usr/share/man/man1/shasum.1* symlink
* Unable to establish //usr/share/man/man1/enc2xs.1* symlink
* Unable to establish //usr/share/man/man1/piconv.1* symlink
* Unable to establish //usr/share/man/man1/instmodsh.1* symlink
* Unable to establish //usr/share/man/man1/xsubpp.1* symlink
* Unable to establish //usr/share/man/man1/zipdetails.1* symlink
* Unable to establish //usr/share/man/man1/json_pp.1* symlink
* Unable to establish //usr/share/man/man1/corelist.1* symlink
* Unable to establish //usr/share/man/man1/pod2usage.1* symlink
* Unable to establish //usr/share/man/man1/podchecker.1* symlink
* Unable to establish //usr/share/man/man1/podselect.1* symlink
* Unable to establish //usr/share/man/man1/perldoc.1* symlink
* Unable to establish //usr/share/man/man1/prove.1* symlink
* Unable to establish //usr/share/man/man1/pod2man.1* symlink
* Unable to establish //usr/share/man/man1/pod2text.1* symlink
* Unable to establish //usr/share/man/man1/perlpodstyle.1* symlink
* Messages for package sys-libs/pam-1.2.1-r2:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package app-misc/ca-certificates-20170717.3.36.1:
* To prevent applications relying on system's trusted root certificate store
* from using CAs where at least one major browser vendor Gentoo is following
* has decided to apply trust level restrictions, the following
* certificate(s) were removed:
*
* Messages for package sys-apps/util-linux-2.30.2-r1:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-arch/xz-utils sys-apps/which sys-devel/bison virtual/libc sys-apps/coreutils net-misc/rsync virtual/os-headers sys-apps/net-tools virtual/shadow sys-apps/sed sys-apps/gawk sys-apps/baselayout sys-devel/autoconf sys-apps/diffutils virtual/editor sys-devel/binutils sys-devel/gettext sys-devel/make sys-devel/libtool sys-devel/gcc app-arch/tar virtual/pkgconfig app-shells/bash:0 net-misc/wget sys-devel/gnuconfig sys-apps/file sys-apps/makedev app-arch/bzip2 sys-apps/portage sys-devel/patch app-arch/gzip sys-devel/automake sys-devel/flex sys-apps/less sys-apps/grep sys-apps/findutils
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.11 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r10 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3-r1::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo
=sys-apps/sandbox-2.13 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3-r1::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo
=app-misc/pax-utils-1.2.3-r1 ~s390
# required by virtual/shadow-0::gentoo
# required by virtual/shadow (argument)
=sys-apps/shadow-4.5-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180428T071207Z/.catalyst_lock'
Command exited with non-zero status 1
6112.18user 915.36system 1:10:18elapsed 166%CPU (0avgtext+0avgdata 2572288maxresident)k
0inputs+0outputs (2810major+403062207minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180428T071207Z.wHefAf/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-29 8:22 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-29 8:22 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* Removing dead symlink //usr/share/man/man1/prove.1.bz2
* Removing dead symlink //usr/share/man/man1/pod2man.1.bz2
* Removing dead symlink //usr/share/man/man1/pod2text.1.bz2
* Removing dead symlink //usr/share/man/man1/perlpodstyle.1.bz2
* Messages for package dev-lang/perl-5.24.3-r1:
* Unable to establish //usr/share/man/man1/ptar.1* symlink
* Unable to establish //usr/share/man/man1/ptardiff.1* symlink
* Unable to establish //usr/share/man/man1/ptargrep.1* symlink
* Unable to establish //usr/share/man/man1/cpan.1* symlink
* Unable to establish //usr/share/man/man1/shasum.1* symlink
* Unable to establish //usr/share/man/man1/enc2xs.1* symlink
* Unable to establish //usr/share/man/man1/piconv.1* symlink
* Unable to establish //usr/share/man/man1/instmodsh.1* symlink
* Unable to establish //usr/share/man/man1/xsubpp.1* symlink
* Unable to establish //usr/share/man/man1/zipdetails.1* symlink
* Unable to establish //usr/share/man/man1/json_pp.1* symlink
* Unable to establish //usr/share/man/man1/corelist.1* symlink
* Unable to establish //usr/share/man/man1/pod2usage.1* symlink
* Unable to establish //usr/share/man/man1/podchecker.1* symlink
* Unable to establish //usr/share/man/man1/podselect.1* symlink
* Unable to establish //usr/share/man/man1/perldoc.1* symlink
* Unable to establish //usr/share/man/man1/prove.1* symlink
* Unable to establish //usr/share/man/man1/pod2man.1* symlink
* Unable to establish //usr/share/man/man1/pod2text.1* symlink
* Unable to establish //usr/share/man/man1/perlpodstyle.1* symlink
* Messages for package sys-libs/pam-1.2.1-r2:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package app-misc/ca-certificates-20170717.3.36.1:
* To prevent applications relying on system's trusted root certificate store
* from using CAs where at least one major browser vendor Gentoo is following
* has decided to apply trust level restrictions, the following
* certificate(s) were removed:
*
* Messages for package sys-apps/util-linux-2.30.2-r1:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/gettext sys-devel/patch sys-apps/net-tools virtual/os-headers sys-apps/makedev sys-apps/file sys-devel/binutils sys-apps/findutils virtual/pkgconfig virtual/libc sys-devel/libtool sys-apps/portage sys-devel/bison virtual/shadow sys-apps/coreutils sys-devel/autoconf sys-apps/sed sys-apps/diffutils sys-devel/gcc app-arch/bzip2 sys-apps/which virtual/editor app-arch/xz-utils sys-apps/less sys-devel/make sys-apps/baselayout net-misc/rsync sys-devel/flex app-shells/bash:0 sys-devel/gnuconfig app-arch/tar app-arch/gzip net-misc/wget sys-apps/grep sys-apps/gawk sys-devel/automake
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.11 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.26-r6 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by virtual/shadow-0::gentoo
# required by virtual/shadow (argument)
=sys-apps/shadow-4.5-r1 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3-r1::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=sys-apps/sandbox-2.13 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3-r1::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=app-misc/pax-utils-1.2.3-r1 ~s390
# required by virtual/libc-1::gentoo
# required by virtual/libc (argument)
=sys-libs/glibc-2.26-r6 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180429T071245Z/.catalyst_lock'
Command exited with non-zero status 1
5504.86user 810.10system 1:07:27elapsed 156%CPU (0avgtext+0avgdata 2572288maxresident)k
0inputs+0outputs (3084major+348417252minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180429T071245Z.qvi6lK/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-04-30 8:17 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-04-30 8:17 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* Removing dead symlink //usr/share/man/man1/prove.1.bz2
* Removing dead symlink //usr/share/man/man1/pod2man.1.bz2
* Removing dead symlink //usr/share/man/man1/pod2text.1.bz2
* Removing dead symlink //usr/share/man/man1/perlpodstyle.1.bz2
* Messages for package dev-lang/perl-5.24.3-r1:
* Unable to establish //usr/share/man/man1/ptar.1* symlink
* Unable to establish //usr/share/man/man1/ptardiff.1* symlink
* Unable to establish //usr/share/man/man1/ptargrep.1* symlink
* Unable to establish //usr/share/man/man1/cpan.1* symlink
* Unable to establish //usr/share/man/man1/shasum.1* symlink
* Unable to establish //usr/share/man/man1/enc2xs.1* symlink
* Unable to establish //usr/share/man/man1/piconv.1* symlink
* Unable to establish //usr/share/man/man1/instmodsh.1* symlink
* Unable to establish //usr/share/man/man1/xsubpp.1* symlink
* Unable to establish //usr/share/man/man1/zipdetails.1* symlink
* Unable to establish //usr/share/man/man1/json_pp.1* symlink
* Unable to establish //usr/share/man/man1/corelist.1* symlink
* Unable to establish //usr/share/man/man1/pod2usage.1* symlink
* Unable to establish //usr/share/man/man1/podchecker.1* symlink
* Unable to establish //usr/share/man/man1/podselect.1* symlink
* Unable to establish //usr/share/man/man1/perldoc.1* symlink
* Unable to establish //usr/share/man/man1/prove.1* symlink
* Unable to establish //usr/share/man/man1/pod2man.1* symlink
* Unable to establish //usr/share/man/man1/pod2text.1* symlink
* Unable to establish //usr/share/man/man1/perlpodstyle.1* symlink
* Messages for package sys-libs/pam-1.2.1-r2:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package app-misc/ca-certificates-20170717.3.36.1:
* To prevent applications relying on system's trusted root certificate store
* from using CAs where at least one major browser vendor Gentoo is following
* has decided to apply trust level restrictions, the following
* certificate(s) were removed:
*
* Messages for package sys-apps/util-linux-2.30.2-r1:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot virtual/editor sys-devel/gcc net-misc/rsync sys-apps/baselayout virtual/os-headers app-arch/bzip2 sys-apps/makedev virtual/libc sys-apps/less virtual/shadow sys-devel/autoconf app-arch/xz-utils sys-apps/net-tools sys-apps/which sys-devel/automake sys-apps/gawk sys-apps/grep sys-devel/patch sys-devel/binutils sys-apps/portage sys-apps/diffutils virtual/pkgconfig sys-devel/flex sys-devel/libtool sys-apps/coreutils sys-apps/sed app-arch/gzip app-arch/tar sys-apps/file app-shells/bash:0 net-misc/wget sys-apps/findutils sys-devel/bison sys-devel/gettext sys-devel/gnuconfig sys-devel/make
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.11 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.26-r6 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3-r1::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=app-misc/pax-utils-1.2.3-r1 ~s390
# required by virtual/shadow-0::gentoo
# required by virtual/shadow (argument)
=sys-apps/shadow-4.5-r1 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3-r1::gentoo
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=sys-apps/sandbox-2.13 ~s390
# required by virtual/libc-1::gentoo
# required by virtual/libc (argument)
=sys-libs/glibc-2.26-r6 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180430T071230Z/.catalyst_lock'
Command exited with non-zero status 1
5484.34user 830.95system 1:03:01elapsed 167%CPU (0avgtext+0avgdata 2572288maxresident)k
0inputs+0outputs (3001major+348296179minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180430T071230Z.KdqH48/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-05-01 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-05-01 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage1.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180501T071209Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180501T071209Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180501T071209Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180501T071209Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180501T071209Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180501T071209Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180501T071209Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180501T071209Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180501T071209Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180501T071209Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180501T071209Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180501T071209Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180501T071209Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180501T071209Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180501T071209Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
[ebuild U ] sys-libs/ncurses-6.1-r2 [6.0-r1]
[ebuild U ] sys-apps/debianutils-4.8.3 [4.7]
[ebuild U ] sys-devel/autoconf-wrapper-13-r1 [13]
[ebuild U ] net-libs/libnsl-0-r1 [0]
[ebuild rR ] sys-apps/less-529
[ebuild rR ] sys-libs/readline-6.3_p8-r3
[ebuild rR ] sys-process/procps-3.3.12
[ebuild U ] dev-lang/perl-5.24.3-r1 [5.24.3]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4 [7.100.200_rc-r3]
[ebuild U ] virtual/perl-File-Spec-3.630.100_rc-r4 [3.630.100_rc-r3]
[ebuild U ] virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r4 [1.441.700.100_rc-r3]
[ebuild U ] virtual/perl-JSON-PP-2.273.0.100_rc-r6 [2.273.0.100_rc-r5]
[ebuild U ] app-eselect/eselect-python-20171204 [20160516]
[ebuild U ] sys-devel/automake-1.15.1-r2 [1.15.1-r1]
[ebuild rR ] app-shells/bash-4.3_p48-r1
[ebuild U ] app-arch/xz-utils-5.2.3 [5.2.2]
[ebuild rR ] sys-kernel/linux-headers-4.13
[ebuild rR ] sys-apps/coreutils-8.26
[ebuild rR ] sys-apps/net-tools-1.60_p20161110235919
[ebuild rR ] app-portage/elt-patches-20170815
[ebuild rR ] sys-devel/m4-1.4.17
[ebuild r U ] app-misc/pax-utils-1.2.3-r1 [1.1.7]
[ebuild rR ] dev-util/gtk-doc-am-1.25-r1
[ebuild rR ] app-portage/portage-utils-0.62
[ebuild rR ] dev-libs/libltdl-2.4.6
[ebuild rR ] dev-libs/gmp-6.1.2
[ebuild rR ] sys-devel/gettext-0.19.8.1
[ebuild rR ] sys-devel/libtool-2.4.6-r3
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild U ] app-admin/eselect-1.4.11 [1.4.8]
[ebuild r U ] sys-apps/sandbox-2.13 [2.10-r4]
[ebuild rR ] sys-process/psmisc-22.21-r3
[ebuild U ] app-misc/ca-certificates-20170717.3.36.1 [20161130.3.30.2]
[ebuild rR ] sys-apps/diffutils-3.3
[ebuild rR ] net-misc/wget-1.19.1-r2
[ebuild U ] sys-devel/flex-2.6.4-r1 [2.6.1]
[ebuild R ] sys-apps/portage-2.3.8
[ebuild rR ] app-editors/nano-2.8.7
[ebuild rR ] sys-apps/man-db-2.7.6.1-r2
[ebuild rR ] sys-apps/texinfo-6.3
[ebuild rR ] sys-devel/binutils-2.29.1-r1
[ebuild rR ] dev-libs/elfutils-0.170-r1
[ebuild rR ] sys-devel/bison-3.0.4-r1
[ebuild rR ] sys-devel/gcc-5.4.0-r4
[ebuild rR ] sys-apps/iproute2-4.14.1-r2
[ebuild rR ] sys-libs/pam-1.2.1-r2
[ebuild rR ] sys-apps/util-linux-2.30.2-r1
[ebuild rR ] sys-auth/pambase-20150213-r1
[ebuild rR ] sys-apps/s390-tools-1.36.1-r1
[ebuild rR ] dev-libs/glib-2.50.3-r1
[ebuild rR ] sys-apps/openrc-0.34.11
[ebuild r U ] sys-apps/shadow-4.6 [4.4-r2]
[ebuild rR ] dev-python/setuptools-34.0.2-r1
[ebuild U ] dev-python/six-1.11.0 [1.10.0]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by @__auto_rebuild__ (argument)
=sys-apps/shadow-4.6 ~s390
# required by @__auto_rebuild__ (argument)
=sys-apps/sandbox-2.13 ~s390
# required by @__auto_rebuild__ (argument)
=app-misc/pax-utils-1.2.3-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180501T071209Z/.catalyst_lock'
Command exited with non-zero status 1
44.62user 9.63system 1:01.34elapsed 88%CPU (0avgtext+0avgdata 186928maxresident)k
0inputs+0outputs (451major+2473448minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180501T071209Z.K8Pgxi/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-05-02 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-05-02 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180502T071214Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180502T071214Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180502T071214Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180502T071214Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180502T071214Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180502T071214Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180502T071214Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180502T071214Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180502T071214Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180502T071214Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180502T071214Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180502T071214Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180502T071214Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180502T071214Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180502T071214Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
[ebuild r U ] sys-libs/glibc-2.25-r11 [2.25-r9]
[ebuild U ] sys-libs/ncurses-6.1-r2 [6.0-r1]
[ebuild U ] sys-apps/debianutils-4.8.3 [4.7]
[ebuild U ] dev-lang/python-exec-2.4.5 [2.4.4]
[ebuild U ] sys-devel/autoconf-wrapper-13-r1 [13]
[ebuild U ] net-libs/libnsl-0-r1 [0]
[ebuild N ] dev-util/re2c-0.13.5-r1
[ebuild rR ] sys-apps/less-529
[ebuild rR ] sys-libs/readline-6.3_p8-r3
[ebuild U ] net-misc/rsync-3.1.3 [3.1.2-r2]
[ebuild rR ] sys-process/procps-3.3.12
[ebuild U ] dev-lang/perl-5.24.3-r1 [5.24.3]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4 [7.100.200_rc-r3]
[ebuild U ] virtual/perl-File-Spec-3.630.100_rc-r4 [3.630.100_rc-r3]
[ebuild U ] virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r4 [1.441.700.100_rc-r3]
[ebuild U ] virtual/perl-JSON-PP-2.273.0.100_rc-r6 [2.273.0.100_rc-r5]
[ebuild U ] app-eselect/eselect-python-20171204 [20160516]
[ebuild U ] sys-devel/automake-1.15.1-r2 [1.15.1-r1]
[ebuild rR ] app-shells/bash-4.3_p48-r1
[ebuild U ] net-misc/netifrc-0.5.1 [0.2.2]
[ebuild U ] app-arch/xz-utils-5.2.3 [5.2.2]
[ebuild rR ] sys-kernel/linux-headers-4.13
[ebuild rR ] sys-apps/coreutils-8.26
[ebuild rR ] sys-apps/net-tools-1.60_p20161110235919
[ebuild rR ] app-portage/elt-patches-20170815
[ebuild rR ] sys-devel/m4-1.4.17
[ebuild U ] app-misc/pax-utils-1.2.3 [1.1.7]
[ebuild rR ] app-portage/portage-utils-0.62
[ebuild rR ] dev-util/gtk-doc-am-1.25-r1
[ebuild rR ] dev-libs/libltdl-2.4.6
[ebuild rR ] dev-libs/gmp-6.1.2
[ebuild rR ] sys-devel/gettext-0.19.8.1
[ebuild rR ] sys-devel/libtool-2.4.6-r3
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild U ] app-admin/eselect-1.4.11 [1.4.8]
[ebuild U ] sys-apps/kmod-24 [23]
[ebuild U ] sys-apps/sandbox-2.13 [2.10-r4]
[ebuild rR ] sys-process/psmisc-22.21-r3
[ebuild U ] app-misc/ca-certificates-20170717.3.36.1 [20161130.3.30.2]
[ebuild rR ] net-misc/wget-1.19.1-r2
[ebuild rR ] sys-apps/diffutils-3.3
[ebuild U ] sys-devel/flex-2.6.4-r1 [2.6.1]
[ebuild U ] dev-libs/libxslt-1.1.32 [1.1.30-r2]
[ebuild rR ] dev-python/pyparsing-2.2.0
[ebuild rR ] dev-python/appdirs-1.4.3
[ebuild N ] dev-util/ninja-1.8.2
[ebuild rR ] sys-apps/texinfo-6.3
[ebuild rR ] app-editors/nano-2.8.7
[ebuild rR ] sys-devel/binutils-2.29.1-r1
[ebuild rR ] dev-libs/elfutils-0.170-r1
[ebuild rR ] sys-devel/bison-3.0.4-r1
[ebuild rR ] app-text/po4a-0.47-r1
[ebuild rR ] sys-devel/gcc-5.4.0-r4
[ebuild rR ] sys-apps/iproute2-4.14.1-r2
[ebuild rR ] sys-apps/man-db-2.7.6.1-r2
[ebuild rR ] sys-libs/pam-1.2.1-r2
[ebuild rR ] sys-apps/util-linux-2.30.2-r1
[ebuild rR ] sys-auth/pambase-20150213-r1
[ebuild rR ] sys-apps/s390-tools-1.36.1-r1
[ebuild rR ] dev-libs/glib-2.50.3-r1
[ebuild rR ] sys-apps/openrc-0.34.11
[ebuild r U ] sys-apps/shadow-4.6 [4.4-r2]
[ebuild rR ] dev-python/packaging-16.8
[ebuild R ] sys-apps/portage-2.3.8
[ebuild rR ] dev-python/setuptools-34.0.2-r1
[ebuild U ] dev-python/six-1.11.0 [1.10.0]
[ebuild rR ] dev-python/certifi-2017.4.17
[ebuild rR ] dev-python/pyxattr-0.5.5
[ebuild N ] dev-util/meson-0.46.0
[ebuild r U ] sys-fs/udev-236-r1 [233]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-fs/udev-236-r1::gentoo
# required by @__auto_rebuild__ (argument)
=dev-util/meson-0.46.0 ~s390
# required by @__auto_rebuild__ (argument)
=sys-libs/glibc-2.25-r11 ~s390
# required by @__auto_rebuild__ (argument)
=sys-apps/shadow-4.6 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180502T071214Z/.catalyst_lock'
Command exited with non-zero status 1
44.64user 9.42system 0:59.80elapsed 90%CPU (0avgtext+0avgdata 188880maxresident)k
0inputs+0outputs (470major+2479145minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180502T071214Z.fI3aHt/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-05-03 7:16 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-05-03 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180503T071241Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180503T071241Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180503T071241Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180503T071241Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180503T071241Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180503T071241Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180503T071241Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180503T071241Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180503T071241Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180503T071241Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180503T071241Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180503T071241Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180503T071241Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180503T071241Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180503T071241Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
[ebuild r U ] sys-libs/glibc-2.25-r11 [2.25-r9]
[ebuild U ] sys-libs/ncurses-6.1-r2 [6.0-r1]
[ebuild U ] sys-apps/debianutils-4.8.3 [4.7]
[ebuild U ] dev-lang/python-exec-2.4.5 [2.4.4]
[ebuild U ] sys-devel/autoconf-wrapper-13-r1 [13]
[ebuild N ] dev-util/re2c-0.13.5-r1
[ebuild U ] net-libs/libnsl-0-r1 [0]
[ebuild rR ] sys-apps/less-529
[ebuild rR ] sys-libs/readline-6.3_p8-r3
[ebuild U ] net-misc/rsync-3.1.3 [3.1.2-r2]
[ebuild rR ] sys-process/procps-3.3.12
[ebuild U ] dev-lang/perl-5.24.3-r1 [5.24.3]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4 [7.100.200_rc-r3]
[ebuild U ] virtual/perl-File-Spec-3.630.100_rc-r4 [3.630.100_rc-r3]
[ebuild U ] virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r4 [1.441.700.100_rc-r3]
[ebuild U ] virtual/perl-JSON-PP-2.273.0.100_rc-r6 [2.273.0.100_rc-r5]
[ebuild U ] sys-devel/automake-1.15.1-r2 [1.15.1-r1]
[ebuild U ] app-eselect/eselect-python-20171204 [20160516]
[ebuild rR ] app-shells/bash-4.3_p48-r1
[ebuild U ] net-misc/netifrc-0.5.1 [0.2.2]
[ebuild U ] app-arch/xz-utils-5.2.3 [5.2.2]
[ebuild rR ] sys-kernel/linux-headers-4.13
[ebuild rR ] sys-apps/coreutils-8.26
[ebuild rR ] sys-apps/net-tools-1.60_p20161110235919
[ebuild rR ] app-portage/elt-patches-20170815
[ebuild rR ] sys-devel/m4-1.4.17
[ebuild U ] app-misc/pax-utils-1.2.3 [1.1.7]
[ebuild rR ] dev-util/gtk-doc-am-1.25-r1
[ebuild rR ] app-portage/portage-utils-0.62
[ebuild rR ] dev-libs/libltdl-2.4.6
[ebuild rR ] dev-libs/gmp-6.1.2
[ebuild rR ] sys-devel/gettext-0.19.8.1
[ebuild rR ] sys-devel/libtool-2.4.6-r3
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild U ] app-admin/eselect-1.4.11 [1.4.8]
[ebuild U ] sys-apps/kmod-24 [23]
[ebuild U ] sys-apps/sandbox-2.13 [2.10-r4]
[ebuild rR ] sys-process/psmisc-22.21-r3
[ebuild U ] app-misc/ca-certificates-20170717.3.36.1 [20161130.3.30.2]
[ebuild rR ] net-misc/wget-1.19.1-r2
[ebuild rR ] sys-apps/diffutils-3.3
[ebuild U ] sys-devel/flex-2.6.4-r1 [2.6.1]
[ebuild U ] dev-libs/libxslt-1.1.32 [1.1.30-r2]
[ebuild rR ] dev-python/pyparsing-2.2.0
[ebuild rR ] dev-python/appdirs-1.4.3
[ebuild N ] dev-util/ninja-1.8.2
[ebuild rR ] app-editors/nano-2.8.7
[ebuild rR ] sys-apps/texinfo-6.3
[ebuild rR ] sys-devel/binutils-2.29.1-r1
[ebuild rR ] dev-libs/elfutils-0.170-r1
[ebuild rR ] sys-devel/bison-3.0.4-r1
[ebuild rR ] app-text/po4a-0.47-r1
[ebuild rR ] sys-devel/gcc-5.4.0-r4
[ebuild rR ] sys-apps/iproute2-4.14.1-r2
[ebuild rR ] sys-apps/man-db-2.7.6.1-r2
[ebuild rR ] sys-libs/pam-1.2.1-r2
[ebuild rR ] sys-apps/util-linux-2.30.2-r1
[ebuild rR ] sys-auth/pambase-20150213-r1
[ebuild rR ] sys-apps/s390-tools-1.36.1-r1
[ebuild rR ] dev-libs/glib-2.50.3-r1
[ebuild rR ] sys-apps/openrc-0.34.11
[ebuild r U ] sys-apps/shadow-4.6 [4.4-r2]
[ebuild rR ] dev-python/packaging-16.8
[ebuild R ] sys-apps/portage-2.3.8
[ebuild rR ] dev-python/setuptools-34.0.2-r1
[ebuild U ] dev-python/six-1.11.0 [1.10.0]
[ebuild rR ] dev-python/certifi-2017.4.17
[ebuild rR ] dev-python/pyxattr-0.5.5
[ebuild N ] dev-util/meson-0.46.0
[ebuild r U ] sys-fs/udev-236-r1 [233]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by @__auto_rebuild__ (argument)
=sys-apps/shadow-4.6 ~s390
# required by @__auto_rebuild__ (argument)
=sys-libs/glibc-2.25-r11 ~s390
# required by sys-fs/udev-236-r1::gentoo
# required by @__auto_rebuild__ (argument)
=dev-util/meson-0.46.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180503T071241Z/.catalyst_lock'
Command exited with non-zero status 1
44.85user 9.79system 1:04.50elapsed 84%CPU (0avgtext+0avgdata 189072maxresident)k
0inputs+0outputs (426major+2475804minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180503T071241Z.pEQVGq/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-05-04 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-05-04 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180504T071215Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180504T071215Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180504T071215Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180504T071215Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180504T071215Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180504T071215Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180504T071215Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180504T071215Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180504T071215Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180504T071215Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180504T071215Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180504T071215Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180504T071215Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180504T071215Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180504T071215Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
[ebuild r U ] sys-libs/glibc-2.25-r11 [2.25-r9]
[ebuild U ] sys-libs/ncurses-6.1-r2 [6.0-r1]
[ebuild U ] sys-apps/debianutils-4.8.3 [4.7]
[ebuild U ] dev-lang/python-exec-2.4.5 [2.4.4]
[ebuild U ] sys-devel/autoconf-wrapper-13-r1 [13]
[ebuild N ] dev-util/re2c-0.13.5-r1
[ebuild U ] net-libs/libnsl-0-r1 [0]
[ebuild rR ] sys-apps/less-529
[ebuild rR ] sys-libs/readline-6.3_p8-r3
[ebuild U ] net-misc/rsync-3.1.3 [3.1.2-r2]
[ebuild rR ] sys-process/procps-3.3.12
[ebuild U ] dev-lang/perl-5.24.3-r1 [5.24.3]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4 [7.100.200_rc-r3]
[ebuild U ] virtual/perl-File-Spec-3.630.100_rc-r4 [3.630.100_rc-r3]
[ebuild U ] virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r4 [1.441.700.100_rc-r3]
[ebuild U ] virtual/perl-JSON-PP-2.273.0.100_rc-r6 [2.273.0.100_rc-r5]
[ebuild U ] sys-devel/automake-1.15.1-r2 [1.15.1-r1]
[ebuild U ] app-eselect/eselect-python-20171204 [20160516]
[ebuild rR ] app-shells/bash-4.3_p48-r1
[ebuild U ] net-misc/netifrc-0.5.1 [0.2.2]
[ebuild U ] app-arch/xz-utils-5.2.3 [5.2.2]
[ebuild rR ] sys-kernel/linux-headers-4.13
[ebuild rR ] sys-apps/coreutils-8.26
[ebuild rR ] sys-apps/net-tools-1.60_p20161110235919
[ebuild rR ] app-portage/elt-patches-20170815
[ebuild rR ] sys-devel/m4-1.4.17
[ebuild U ] app-misc/pax-utils-1.2.3 [1.1.7]
[ebuild rR ] dev-util/gtk-doc-am-1.25-r1
[ebuild rR ] app-portage/portage-utils-0.62
[ebuild rR ] dev-libs/libltdl-2.4.6
[ebuild rR ] dev-libs/gmp-6.1.2
[ebuild rR ] sys-devel/gettext-0.19.8.1
[ebuild rR ] sys-devel/libtool-2.4.6-r3
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild U ] app-admin/eselect-1.4.11 [1.4.8]
[ebuild U ] sys-apps/kmod-24 [23]
[ebuild U ] sys-apps/sandbox-2.13 [2.10-r4]
[ebuild rR ] sys-process/psmisc-22.21-r3
[ebuild U ] app-misc/ca-certificates-20170717.3.36.1 [20161130.3.30.2]
[ebuild rR ] net-misc/wget-1.19.1-r2
[ebuild rR ] sys-apps/diffutils-3.3
[ebuild U ] sys-devel/flex-2.6.4-r1 [2.6.1]
[ebuild U ] dev-libs/libxslt-1.1.32 [1.1.30-r2]
[ebuild rR ] dev-python/appdirs-1.4.3
[ebuild rR ] dev-python/pyparsing-2.2.0
[ebuild N ] dev-util/ninja-1.8.2
[ebuild rR ] app-editors/nano-2.8.7
[ebuild rR ] sys-apps/texinfo-6.3
[ebuild rR ] sys-devel/binutils-2.29.1-r1
[ebuild rR ] dev-libs/elfutils-0.170-r1
[ebuild rR ] sys-devel/bison-3.0.4-r1
[ebuild rR ] app-text/po4a-0.47-r1
[ebuild rR ] sys-devel/gcc-5.4.0-r4
[ebuild rR ] sys-apps/iproute2-4.14.1-r2
[ebuild rR ] sys-apps/man-db-2.7.6.1-r2
[ebuild rR ] sys-libs/pam-1.2.1-r2
[ebuild rR ] sys-apps/util-linux-2.30.2-r1
[ebuild rR ] sys-auth/pambase-20150213-r1
[ebuild rR ] sys-apps/s390-tools-1.36.1-r1
[ebuild rR ] dev-libs/glib-2.50.3-r1
[ebuild rR ] sys-apps/openrc-0.34.11
[ebuild r U ] sys-apps/shadow-4.6 [4.4-r2]
[ebuild rR ] dev-python/packaging-16.8
[ebuild R ] sys-apps/portage-2.3.8
[ebuild rR ] dev-python/setuptools-34.0.2-r1
[ebuild U ] dev-python/six-1.11.0 [1.10.0]
[ebuild rR ] dev-python/pyxattr-0.5.5
[ebuild rR ] dev-python/certifi-2017.4.17
[ebuild N ] dev-util/meson-0.46.0
[ebuild r U ] sys-fs/udev-236-r1 [233]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-fs/udev-236-r1::gentoo
# required by @__auto_rebuild__ (argument)
=dev-util/meson-0.46.0 ~s390
# required by @__auto_rebuild__ (argument)
=sys-apps/shadow-4.6 ~s390
# required by @__auto_rebuild__ (argument)
=sys-libs/glibc-2.25-r11 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180504T071215Z/.catalyst_lock'
Command exited with non-zero status 1
44.93user 9.56system 1:00.96elapsed 89%CPU (0avgtext+0avgdata 188336maxresident)k
0inputs+0outputs (410major+2477107minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180504T071215Z.WQIQGB/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-05-05 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-05-05 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180505T071220Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180505T071220Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180505T071220Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180505T071220Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180505T071220Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180505T071220Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180505T071220Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180505T071220Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180505T071220Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180505T071220Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180505T071220Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180505T071220Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180505T071220Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180505T071220Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180505T071220Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
[ebuild r U ] sys-libs/glibc-2.25-r11 [2.25-r9]
[ebuild U ] sys-libs/ncurses-6.1-r2 [6.0-r1]
[ebuild U ] sys-apps/debianutils-4.8.3 [4.7]
[ebuild U ] dev-lang/python-exec-2.4.5 [2.4.4]
[ebuild U ] sys-devel/autoconf-wrapper-13-r1 [13]
[ebuild N ] dev-util/re2c-0.13.5-r1
[ebuild U ] net-libs/libnsl-0-r1 [0]
[ebuild rR ] sys-apps/less-529
[ebuild rR ] sys-libs/readline-6.3_p8-r3
[ebuild U ] net-misc/rsync-3.1.3 [3.1.2-r2]
[ebuild rR ] sys-process/procps-3.3.12
[ebuild U ] dev-lang/perl-5.24.3-r1 [5.24.3]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4 [7.100.200_rc-r3]
[ebuild U ] virtual/perl-File-Spec-3.630.100_rc-r4 [3.630.100_rc-r3]
[ebuild U ] virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r4 [1.441.700.100_rc-r3]
[ebuild U ] virtual/perl-JSON-PP-2.273.0.100_rc-r6 [2.273.0.100_rc-r5]
[ebuild U ] sys-devel/automake-1.15.1-r2 [1.15.1-r1]
[ebuild U ] app-eselect/eselect-python-20171204 [20160516]
[ebuild rR ] app-shells/bash-4.3_p48-r1
[ebuild U ] net-misc/netifrc-0.5.1 [0.2.2]
[ebuild U ] app-arch/xz-utils-5.2.3 [5.2.2]
[ebuild rR ] sys-kernel/linux-headers-4.13
[ebuild rR ] sys-apps/coreutils-8.26
[ebuild rR ] sys-apps/net-tools-1.60_p20161110235919
[ebuild rR ] app-portage/elt-patches-20170815
[ebuild rR ] sys-devel/m4-1.4.17
[ebuild U ] app-misc/pax-utils-1.2.3 [1.1.7]
[ebuild rR ] dev-util/gtk-doc-am-1.25-r1
[ebuild rR ] app-portage/portage-utils-0.62
[ebuild rR ] dev-libs/libltdl-2.4.6
[ebuild rR ] dev-libs/gmp-6.1.2
[ebuild rR ] sys-devel/gettext-0.19.8.1
[ebuild rR ] sys-devel/libtool-2.4.6-r3
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild U ] app-admin/eselect-1.4.11 [1.4.8]
[ebuild U ] sys-apps/kmod-24 [23]
[ebuild U ] sys-apps/sandbox-2.13 [2.10-r4]
[ebuild rR ] sys-process/psmisc-22.21-r3
[ebuild U ] app-misc/ca-certificates-20170717.3.36.1 [20161130.3.30.2]
[ebuild rR ] sys-apps/diffutils-3.3
[ebuild rR ] net-misc/wget-1.19.1-r2
[ebuild U ] sys-devel/flex-2.6.4-r1 [2.6.1]
[ebuild U ] dev-libs/libxslt-1.1.32 [1.1.30-r2]
[ebuild rR ] dev-python/pyparsing-2.2.0
[ebuild rR ] dev-python/appdirs-1.4.3
[ebuild N ] dev-util/ninja-1.8.2
[ebuild rR ] app-editors/nano-2.8.7
[ebuild rR ] sys-apps/texinfo-6.3
[ebuild rR ] sys-devel/binutils-2.29.1-r1
[ebuild rR ] dev-libs/elfutils-0.170-r1
[ebuild rR ] sys-devel/bison-3.0.4-r1
[ebuild rR ] app-text/po4a-0.47-r1
[ebuild rR ] sys-devel/gcc-5.4.0-r4
[ebuild rR ] sys-apps/iproute2-4.14.1-r2
[ebuild rR ] sys-apps/man-db-2.7.6.1-r2
[ebuild rR ] sys-libs/pam-1.2.1-r2
[ebuild rR ] sys-apps/util-linux-2.30.2-r1
[ebuild rR ] sys-auth/pambase-20150213-r1
[ebuild rR ] sys-apps/s390-tools-1.36.1-r1
[ebuild rR ] dev-libs/glib-2.50.3-r1
[ebuild rR ] sys-apps/openrc-0.34.11
[ebuild r U ] sys-apps/shadow-4.6 [4.4-r2]
[ebuild rR ] dev-python/packaging-16.8
[ebuild R ] sys-apps/portage-2.3.8
[ebuild rR ] dev-python/setuptools-34.0.2-r1
[ebuild U ] dev-python/six-1.11.0 [1.10.0]
[ebuild rR ] dev-python/certifi-2017.4.17
[ebuild rR ] dev-python/pyxattr-0.5.5
[ebuild N ] dev-util/meson-0.46.0
[ebuild r U ] sys-fs/udev-236-r1 [233]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by @__auto_rebuild__ (argument)
=sys-libs/glibc-2.25-r11 ~s390
# required by @__auto_rebuild__ (argument)
=sys-apps/shadow-4.6 ~s390
# required by sys-fs/udev-236-r1::gentoo
# required by @__auto_rebuild__ (argument)
=dev-util/meson-0.46.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180505T071220Z/.catalyst_lock'
Command exited with non-zero status 1
44.98user 10.10system 1:07.11elapsed 82%CPU (0avgtext+0avgdata 189632maxresident)k
0inputs+0outputs (406major+2478858minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180505T071220Z.OUMzJG/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-05-06 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-05-06 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180506T071136Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180506T071136Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180506T071136Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180506T071136Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180506T071136Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180506T071136Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180506T071136Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180506T071136Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180506T071136Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180506T071136Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180506T071136Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180506T071136Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180506T071136Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180506T071136Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180506T071136Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
[ebuild r U ] sys-libs/glibc-2.25-r11 [2.25-r9]
[ebuild U ] sys-libs/ncurses-6.1-r2 [6.0-r1]
[ebuild U ] sys-apps/debianutils-4.8.3 [4.7]
[ebuild U ] dev-lang/python-exec-2.4.5 [2.4.4]
[ebuild U ] sys-devel/autoconf-wrapper-13-r1 [13]
[ebuild N ] dev-util/re2c-0.13.5-r1
[ebuild U ] net-libs/libnsl-0-r1 [0]
[ebuild rR ] sys-apps/less-529
[ebuild rR ] sys-libs/readline-6.3_p8-r3
[ebuild U ] net-misc/rsync-3.1.3 [3.1.2-r2]
[ebuild rR ] sys-process/procps-3.3.12
[ebuild U ] dev-lang/perl-5.24.3-r1 [5.24.3]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4 [7.100.200_rc-r3]
[ebuild U ] virtual/perl-File-Spec-3.630.100_rc-r4 [3.630.100_rc-r3]
[ebuild U ] virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r4 [1.441.700.100_rc-r3]
[ebuild U ] virtual/perl-JSON-PP-2.273.0.100_rc-r6 [2.273.0.100_rc-r5]
[ebuild U ] app-eselect/eselect-python-20171204 [20160516]
[ebuild U ] sys-devel/automake-1.15.1-r2 [1.15.1-r1]
[ebuild rR ] app-shells/bash-4.3_p48-r1
[ebuild U ] net-misc/netifrc-0.5.1 [0.2.2]
[ebuild U ] app-arch/xz-utils-5.2.3 [5.2.2]
[ebuild rR ] sys-kernel/linux-headers-4.13
[ebuild rR ] sys-apps/coreutils-8.26
[ebuild rR ] sys-apps/net-tools-1.60_p20161110235919
[ebuild rR ] app-portage/elt-patches-20170815
[ebuild rR ] sys-devel/m4-1.4.17
[ebuild U ] app-misc/pax-utils-1.2.3 [1.1.7]
[ebuild rR ] dev-util/gtk-doc-am-1.25-r1
[ebuild rR ] app-portage/portage-utils-0.62
[ebuild rR ] dev-libs/libltdl-2.4.6
[ebuild rR ] dev-libs/gmp-6.1.2
[ebuild rR ] sys-devel/gettext-0.19.8.1
[ebuild rR ] sys-devel/libtool-2.4.6-r3
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild U ] app-admin/eselect-1.4.11 [1.4.8]
[ebuild U ] sys-apps/kmod-24 [23]
[ebuild U ] sys-apps/sandbox-2.13 [2.10-r4]
[ebuild rR ] sys-process/psmisc-22.21-r3
[ebuild U ] app-misc/ca-certificates-20170717.3.36.1 [20161130.3.30.2]
[ebuild rR ] sys-apps/diffutils-3.3
[ebuild rR ] net-misc/wget-1.19.1-r2
[ebuild U ] sys-devel/flex-2.6.4-r1 [2.6.1]
[ebuild U ] dev-libs/libxslt-1.1.32 [1.1.30-r2]
[ebuild rR ] dev-python/pyparsing-2.2.0
[ebuild rR ] dev-python/appdirs-1.4.3
[ebuild N ] dev-util/ninja-1.8.2
[ebuild rR ] app-editors/nano-2.8.7
[ebuild rR ] sys-apps/texinfo-6.3
[ebuild rR ] sys-devel/binutils-2.29.1-r1
[ebuild rR ] dev-libs/elfutils-0.170-r1
[ebuild rR ] sys-devel/bison-3.0.4-r1
[ebuild rR ] app-text/po4a-0.47-r1
[ebuild rR ] sys-devel/gcc-5.4.0-r4
[ebuild rR ] sys-apps/iproute2-4.14.1-r2
[ebuild rR ] sys-apps/man-db-2.7.6.1-r2
[ebuild rR ] sys-libs/pam-1.2.1-r2
[ebuild rR ] sys-apps/util-linux-2.30.2-r1
[ebuild rR ] sys-auth/pambase-20150213-r1
[ebuild rR ] sys-apps/s390-tools-1.36.1-r1
[ebuild rR ] dev-libs/glib-2.50.3-r1
[ebuild rR ] sys-apps/openrc-0.34.11
[ebuild r U ] sys-apps/shadow-4.6 [4.4-r2]
[ebuild rR ] dev-python/packaging-16.8
[ebuild R ] sys-apps/portage-2.3.8
[ebuild rR ] dev-python/setuptools-34.0.2-r1
[ebuild U ] dev-python/six-1.11.0 [1.10.0]
[ebuild rR ] dev-python/certifi-2017.4.17
[ebuild rR ] dev-python/pyxattr-0.5.5
[ebuild N ] dev-util/meson-0.46.0
[ebuild r U ] sys-fs/udev-236-r1 [233]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by @__auto_rebuild__ (argument)
=sys-libs/glibc-2.25-r11 ~s390
# required by sys-fs/udev-236-r1::gentoo
# required by @__auto_rebuild__ (argument)
=dev-util/meson-0.46.0 ~s390
# required by @__auto_rebuild__ (argument)
=sys-apps/shadow-4.6 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180506T071136Z/.catalyst_lock'
Command exited with non-zero status 1
44.71user 9.70system 1:03.66elapsed 85%CPU (0avgtext+0avgdata 188352maxresident)k
0inputs+0outputs (425major+2475388minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180506T071136Z.eyEsZx/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-05-07 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-05-07 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180507T071215Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180507T071215Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180507T071215Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180507T071215Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180507T071215Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180507T071215Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180507T071215Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180507T071215Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180507T071215Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180507T071215Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180507T071215Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180507T071215Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180507T071215Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180507T071215Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180507T071215Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
[ebuild r U ] sys-libs/glibc-2.25-r11 [2.25-r9]
[ebuild U ] sys-libs/ncurses-6.1-r2 [6.0-r1]
[ebuild U ] sys-apps/debianutils-4.8.3 [4.7]
[ebuild U ] dev-lang/python-exec-2.4.5 [2.4.4]
[ebuild U ] sys-devel/autoconf-wrapper-13-r1 [13]
[ebuild N ] dev-util/re2c-0.13.5-r1
[ebuild U ] net-libs/libnsl-0-r1 [0]
[ebuild rR ] sys-apps/less-529
[ebuild rR ] sys-libs/readline-6.3_p8-r3
[ebuild U ] net-misc/rsync-3.1.3 [3.1.2-r2]
[ebuild rR ] sys-process/procps-3.3.12
[ebuild U ] dev-lang/perl-5.24.3-r1 [5.24.3]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4 [7.100.200_rc-r3]
[ebuild U ] virtual/perl-File-Spec-3.630.100_rc-r4 [3.630.100_rc-r3]
[ebuild U ] virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r4 [1.441.700.100_rc-r3]
[ebuild U ] virtual/perl-JSON-PP-2.273.0.100_rc-r6 [2.273.0.100_rc-r5]
[ebuild U ] sys-devel/automake-1.15.1-r2 [1.15.1-r1]
[ebuild U ] app-eselect/eselect-python-20171204 [20160516]
[ebuild rR ] app-shells/bash-4.3_p48-r1
[ebuild U ] net-misc/netifrc-0.5.1 [0.2.2]
[ebuild U ] app-arch/xz-utils-5.2.3 [5.2.2]
[ebuild rR ] sys-kernel/linux-headers-4.13
[ebuild rR ] sys-apps/coreutils-8.26
[ebuild rR ] sys-apps/net-tools-1.60_p20161110235919
[ebuild rR ] app-portage/elt-patches-20170815
[ebuild rR ] sys-devel/m4-1.4.17
[ebuild U ] app-misc/pax-utils-1.2.3 [1.1.7]
[ebuild rR ] app-portage/portage-utils-0.62
[ebuild rR ] dev-util/gtk-doc-am-1.25-r1
[ebuild rR ] dev-libs/libltdl-2.4.6
[ebuild rR ] dev-libs/gmp-6.1.2
[ebuild rR ] sys-devel/gettext-0.19.8.1
[ebuild rR ] sys-devel/libtool-2.4.6-r3
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild U ] app-admin/eselect-1.4.11 [1.4.8]
[ebuild U ] sys-apps/kmod-24 [23]
[ebuild U ] sys-apps/sandbox-2.13 [2.10-r4]
[ebuild rR ] sys-process/psmisc-22.21-r3
[ebuild U ] app-misc/ca-certificates-20170717.3.36.1 [20161130.3.30.2]
[ebuild rR ] net-misc/wget-1.19.1-r2
[ebuild rR ] sys-apps/diffutils-3.3
[ebuild U ] sys-devel/flex-2.6.4-r1 [2.6.1]
[ebuild U ] dev-libs/libxslt-1.1.32 [1.1.30-r2]
[ebuild rR ] dev-python/appdirs-1.4.3
[ebuild rR ] dev-python/pyparsing-2.2.0
[ebuild N ] dev-util/ninja-1.8.2
[ebuild rR ] app-editors/nano-2.8.7
[ebuild rR ] sys-apps/texinfo-6.3
[ebuild rR ] sys-devel/binutils-2.29.1-r1
[ebuild rR ] dev-libs/elfutils-0.170-r1
[ebuild rR ] sys-devel/bison-3.0.4-r1
[ebuild rR ] app-text/po4a-0.47-r1
[ebuild rR ] sys-devel/gcc-5.4.0-r4
[ebuild rR ] sys-apps/iproute2-4.14.1-r2
[ebuild rR ] sys-apps/man-db-2.7.6.1-r2
[ebuild rR ] sys-libs/pam-1.2.1-r2
[ebuild rR ] sys-apps/util-linux-2.30.2-r1
[ebuild rR ] sys-auth/pambase-20150213-r1
[ebuild rR ] sys-apps/s390-tools-1.36.1-r1
[ebuild rR ] dev-libs/glib-2.50.3-r1
[ebuild rR ] sys-apps/openrc-0.34.11
[ebuild r U ] sys-apps/shadow-4.6 [4.4-r2]
[ebuild rR ] dev-python/packaging-16.8
[ebuild R ] sys-apps/portage-2.3.8
[ebuild rR ] dev-python/setuptools-34.0.2-r1
[ebuild U ] dev-python/six-1.11.0 [1.10.0]
[ebuild rR ] dev-python/pyxattr-0.5.5
[ebuild rR ] dev-python/certifi-2017.4.17
[ebuild N ] dev-util/meson-0.46.0
[ebuild r U ] sys-fs/udev-236-r1 [233]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by @__auto_rebuild__ (argument)
=sys-apps/shadow-4.6 ~s390
# required by @__auto_rebuild__ (argument)
=sys-libs/glibc-2.25-r11 ~s390
# required by sys-fs/udev-236-r1::gentoo
# required by @__auto_rebuild__ (argument)
=dev-util/meson-0.46.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180507T071215Z/.catalyst_lock'
Command exited with non-zero status 1
44.71user 9.53system 1:01.16elapsed 88%CPU (0avgtext+0avgdata 188960maxresident)k
0inputs+0outputs (417major+2468495minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180507T071215Z.dIVfSF/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-05-08 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-05-08 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180508T071203Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180508T071203Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180508T071203Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180508T071203Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180508T071203Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180508T071203Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180508T071203Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180508T071203Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180508T071203Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180508T071203Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180508T071203Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180508T071203Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180508T071203Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180508T071203Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180508T071203Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
[ebuild r U ] sys-libs/glibc-2.25-r11 [2.25-r9]
[ebuild U ] sys-libs/ncurses-6.1-r2 [6.0-r1]
[ebuild U ] sys-apps/debianutils-4.8.3 [4.7]
[ebuild U ] dev-lang/python-exec-2.4.5 [2.4.4]
[ebuild U ] sys-devel/autoconf-wrapper-13-r1 [13]
[ebuild N ] dev-util/re2c-0.13.5-r1
[ebuild U ] net-libs/libnsl-0-r1 [0]
[ebuild rR ] sys-apps/less-529
[ebuild rR ] sys-libs/readline-6.3_p8-r3
[ebuild U ] net-misc/rsync-3.1.3 [3.1.2-r2]
[ebuild rR ] sys-process/procps-3.3.12
[ebuild U ] dev-lang/perl-5.24.3-r1 [5.24.3]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4 [7.100.200_rc-r3]
[ebuild U ] virtual/perl-File-Spec-3.630.100_rc-r4 [3.630.100_rc-r3]
[ebuild U ] virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r4 [1.441.700.100_rc-r3]
[ebuild U ] virtual/perl-JSON-PP-2.273.0.100_rc-r6 [2.273.0.100_rc-r5]
[ebuild U ] app-eselect/eselect-python-20171204 [20160516]
[ebuild U ] sys-devel/automake-1.15.1-r2 [1.15.1-r1]
[ebuild rR ] app-shells/bash-4.3_p48-r1
[ebuild U ] net-misc/netifrc-0.5.1 [0.2.2]
[ebuild U ] app-arch/xz-utils-5.2.3 [5.2.2]
[ebuild rR ] sys-kernel/linux-headers-4.13
[ebuild rR ] sys-apps/coreutils-8.26
[ebuild rR ] sys-apps/net-tools-1.60_p20161110235919
[ebuild rR ] app-portage/elt-patches-20170815
[ebuild rR ] sys-devel/m4-1.4.17
[ebuild U ] app-misc/pax-utils-1.2.3 [1.1.7]
[ebuild rR ] app-portage/portage-utils-0.62
[ebuild rR ] dev-util/gtk-doc-am-1.25-r1
[ebuild rR ] dev-libs/libltdl-2.4.6
[ebuild rR ] dev-libs/gmp-6.1.2
[ebuild rR ] sys-devel/gettext-0.19.8.1
[ebuild rR ] sys-devel/libtool-2.4.6-r3
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild U ] app-admin/eselect-1.4.11 [1.4.8]
[ebuild U ] sys-apps/kmod-24 [23]
[ebuild U ] sys-apps/sandbox-2.13 [2.10-r4]
[ebuild rR ] sys-process/psmisc-22.21-r3
[ebuild U ] app-misc/ca-certificates-20170717.3.36.1 [20161130.3.30.2]
[ebuild rR ] net-misc/wget-1.19.1-r2
[ebuild rR ] sys-apps/diffutils-3.3
[ebuild U ] sys-devel/flex-2.6.4-r1 [2.6.1]
[ebuild U ] dev-libs/libxslt-1.1.32 [1.1.30-r2]
[ebuild rR ] dev-python/appdirs-1.4.3
[ebuild rR ] dev-python/pyparsing-2.2.0
[ebuild N ] dev-util/ninja-1.8.2
[ebuild rR ] app-editors/nano-2.8.7
[ebuild rR ] sys-apps/texinfo-6.3
[ebuild rR ] sys-devel/binutils-2.29.1-r1
[ebuild rR ] dev-libs/elfutils-0.170-r1
[ebuild rR ] sys-devel/bison-3.0.4-r1
[ebuild rR ] app-text/po4a-0.47-r1
[ebuild rR ] sys-devel/gcc-5.4.0-r4
[ebuild rR ] sys-apps/iproute2-4.14.1-r2
[ebuild rR ] sys-apps/man-db-2.7.6.1-r2
[ebuild rR ] sys-libs/pam-1.2.1-r2
[ebuild rR ] sys-apps/util-linux-2.30.2-r1
[ebuild rR ] sys-auth/pambase-20150213-r1
[ebuild rR ] sys-apps/s390-tools-1.36.1-r1
[ebuild rR ] dev-libs/glib-2.50.3-r1
[ebuild rR ] sys-apps/openrc-0.34.11
[ebuild r U ] sys-apps/shadow-4.6 [4.4-r2]
[ebuild rR ] dev-python/packaging-16.8
[ebuild R ] sys-apps/portage-2.3.8
[ebuild rR ] dev-python/setuptools-34.0.2-r1
[ebuild U ] dev-python/six-1.11.0 [1.10.0]
[ebuild rR ] dev-python/pyxattr-0.5.5
[ebuild rR ] dev-python/certifi-2017.4.17
[ebuild N ] dev-util/meson-0.46.0
[ebuild r U ] sys-fs/udev-236-r1 [233]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by @__auto_rebuild__ (argument)
=sys-libs/glibc-2.25-r11 ~s390
# required by @__auto_rebuild__ (argument)
=sys-apps/shadow-4.6 ~s390
# required by sys-fs/udev-236-r1::gentoo
# required by @__auto_rebuild__ (argument)
=dev-util/meson-0.46.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180508T071203Z/.catalyst_lock'
Command exited with non-zero status 1
44.64user 9.33system 0:58.89elapsed 91%CPU (0avgtext+0avgdata 188112maxresident)k
0inputs+0outputs (423major+2474189minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180508T071203Z.vr1i6P/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-05-09 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-05-09 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180509T071204Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180509T071204Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180509T071204Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180509T071204Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180509T071204Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180509T071204Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180509T071204Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180509T071204Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180509T071204Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180509T071204Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180509T071204Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180509T071204Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180509T071204Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180509T071204Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180509T071204Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
[ebuild r U ] sys-libs/glibc-2.25-r11 [2.25-r9]
[ebuild U ] sys-libs/ncurses-6.1-r2 [6.0-r1]
[ebuild U ] sys-apps/debianutils-4.8.3 [4.7]
[ebuild U ] dev-lang/python-exec-2.4.5 [2.4.4]
[ebuild U ] sys-devel/autoconf-wrapper-13-r1 [13]
[ebuild N ] dev-util/re2c-0.13.5-r1
[ebuild U ] net-libs/libnsl-0-r1 [0]
[ebuild rR ] sys-apps/less-529
[ebuild rR ] sys-libs/readline-6.3_p8-r3
[ebuild U ] net-misc/rsync-3.1.3 [3.1.2-r2]
[ebuild rR ] sys-process/procps-3.3.12
[ebuild U ] dev-lang/perl-5.24.3-r1 [5.24.3]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4 [7.100.200_rc-r3]
[ebuild U ] virtual/perl-File-Spec-3.630.100_rc-r4 [3.630.100_rc-r3]
[ebuild U ] virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r4 [1.441.700.100_rc-r3]
[ebuild U ] virtual/perl-JSON-PP-2.273.0.100_rc-r6 [2.273.0.100_rc-r5]
[ebuild U ] app-eselect/eselect-python-20171204 [20160516]
[ebuild U ] sys-devel/automake-1.15.1-r2 [1.15.1-r1]
[ebuild rR ] app-shells/bash-4.3_p48-r1
[ebuild U ] net-misc/netifrc-0.5.1 [0.2.2]
[ebuild U ] app-arch/xz-utils-5.2.3 [5.2.2]
[ebuild rR ] sys-kernel/linux-headers-4.13
[ebuild rR ] sys-apps/coreutils-8.26
[ebuild rR ] sys-apps/net-tools-1.60_p20161110235919
[ebuild rR ] app-portage/elt-patches-20170815
[ebuild rR ] sys-devel/m4-1.4.17
[ebuild U ] app-misc/pax-utils-1.2.3 [1.1.7]
[ebuild rR ] app-portage/portage-utils-0.62
[ebuild rR ] dev-util/gtk-doc-am-1.25-r1
[ebuild rR ] dev-libs/libltdl-2.4.6
[ebuild rR ] dev-libs/gmp-6.1.2
[ebuild rR ] sys-devel/gettext-0.19.8.1
[ebuild rR ] sys-devel/libtool-2.4.6-r3
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild U ] app-admin/eselect-1.4.11 [1.4.8]
[ebuild U ] sys-apps/kmod-24 [23]
[ebuild U ] sys-apps/sandbox-2.13 [2.10-r4]
[ebuild rR ] sys-process/psmisc-22.21-r3
[ebuild U ] app-misc/ca-certificates-20170717.3.36.1 [20161130.3.30.2]
[ebuild rR ] net-misc/wget-1.19.1-r2
[ebuild rR ] sys-apps/diffutils-3.3
[ebuild U ] sys-devel/flex-2.6.4-r1 [2.6.1]
[ebuild U ] dev-libs/libxslt-1.1.32 [1.1.30-r2]
[ebuild rR ] dev-python/pyparsing-2.2.0
[ebuild rR ] dev-python/appdirs-1.4.3
[ebuild N ] dev-util/ninja-1.8.2
[ebuild rR ] sys-apps/texinfo-6.3
[ebuild rR ] app-editors/nano-2.8.7
[ebuild rR ] sys-devel/binutils-2.29.1-r1
[ebuild rR ] dev-libs/elfutils-0.170-r1
[ebuild rR ] sys-devel/bison-3.0.4-r1
[ebuild rR ] app-text/po4a-0.47-r1
[ebuild rR ] sys-devel/gcc-5.4.0-r4
[ebuild rR ] sys-apps/iproute2-4.14.1-r2
[ebuild rR ] sys-apps/man-db-2.7.6.1-r2
[ebuild rR ] sys-libs/pam-1.2.1-r2
[ebuild rR ] sys-apps/util-linux-2.30.2-r1
[ebuild rR ] sys-auth/pambase-20150213-r1
[ebuild rR ] sys-apps/s390-tools-1.36.1-r1
[ebuild rR ] dev-libs/glib-2.50.3-r1
[ebuild rR ] sys-apps/openrc-0.34.11
[ebuild r U ] sys-apps/shadow-4.6 [4.4-r2]
[ebuild rR ] dev-python/packaging-16.8
[ebuild R ] sys-apps/portage-2.3.8
[ebuild rR ] dev-python/setuptools-34.0.2-r1
[ebuild U ] dev-python/six-1.11.0 [1.10.0]
[ebuild rR ] dev-python/certifi-2017.4.17
[ebuild rR ] dev-python/pyxattr-0.5.5
[ebuild N ] dev-util/meson-0.46.0
[ebuild r U ] sys-fs/udev-236-r1 [233]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by @__auto_rebuild__ (argument)
=sys-apps/shadow-4.6 ~s390
# required by @__auto_rebuild__ (argument)
=sys-libs/glibc-2.25-r11 ~s390
# required by sys-fs/udev-236-r1::gentoo
# required by @__auto_rebuild__ (argument)
=dev-util/meson-0.46.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180509T071204Z/.catalyst_lock'
Command exited with non-zero status 1
45.45user 10.29system 1:16.14elapsed 73%CPU (0avgtext+0avgdata 188624maxresident)k
0inputs+0outputs (512major+2479500minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180509T071204Z.RIpeEk/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-05-10 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-05-10 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180510T071240Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180510T071240Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180510T071240Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180510T071240Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180510T071240Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180510T071240Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180510T071240Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180510T071240Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180510T071240Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180510T071240Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180510T071240Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180510T071240Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180510T071240Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180510T071240Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180510T071240Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
[ebuild r U ] sys-libs/glibc-2.25-r11 [2.25-r9]
[ebuild U ] sys-libs/ncurses-6.1-r2 [6.0-r1]
[ebuild U ] sys-apps/debianutils-4.8.3 [4.7]
[ebuild U ] dev-lang/python-exec-2.4.5 [2.4.4]
[ebuild U ] sys-devel/autoconf-wrapper-13-r1 [13]
[ebuild U ] net-libs/libnsl-0-r1 [0]
[ebuild N ] dev-util/re2c-0.13.5-r1
[ebuild rR ] sys-apps/less-529
[ebuild rR ] sys-libs/readline-6.3_p8-r3
[ebuild U ] net-misc/rsync-3.1.3 [3.1.2-r2]
[ebuild rR ] sys-process/procps-3.3.12
[ebuild U ] dev-lang/perl-5.24.3-r1 [5.24.3]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4 [7.100.200_rc-r3]
[ebuild U ] virtual/perl-File-Spec-3.630.100_rc-r4 [3.630.100_rc-r3]
[ebuild U ] virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r4 [1.441.700.100_rc-r3]
[ebuild U ] virtual/perl-JSON-PP-2.273.0.100_rc-r6 [2.273.0.100_rc-r5]
[ebuild U ] app-eselect/eselect-python-20171204 [20160516]
[ebuild U ] sys-devel/automake-1.15.1-r2 [1.15.1-r1]
[ebuild rR ] app-shells/bash-4.3_p48-r1
[ebuild U ] net-misc/netifrc-0.5.1 [0.2.2]
[ebuild U ] app-arch/xz-utils-5.2.3 [5.2.2]
[ebuild rR ] sys-kernel/linux-headers-4.13
[ebuild rR ] sys-apps/coreutils-8.26
[ebuild rR ] sys-apps/net-tools-1.60_p20161110235919
[ebuild rR ] app-portage/elt-patches-20170815
[ebuild rR ] sys-devel/m4-1.4.17
[ebuild U ] app-misc/pax-utils-1.2.3 [1.1.7]
[ebuild rR ] dev-util/gtk-doc-am-1.25-r1
[ebuild rR ] app-portage/portage-utils-0.62
[ebuild rR ] dev-libs/libltdl-2.4.6
[ebuild rR ] dev-libs/gmp-6.1.2
[ebuild rR ] sys-devel/gettext-0.19.8.1
[ebuild rR ] sys-devel/libtool-2.4.6-r3
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild U ] app-admin/eselect-1.4.11 [1.4.8]
[ebuild U ] sys-apps/kmod-24 [23]
[ebuild U ] sys-apps/sandbox-2.13 [2.10-r4]
[ebuild rR ] sys-process/psmisc-22.21-r3
[ebuild U ] app-misc/ca-certificates-20170717.3.36.1 [20161130.3.30.2]
[ebuild rR ] sys-apps/diffutils-3.3
[ebuild rR ] net-misc/wget-1.19.1-r2
[ebuild U ] sys-devel/flex-2.6.4-r1 [2.6.1]
[ebuild U ] dev-libs/libxslt-1.1.32 [1.1.30-r2]
[ebuild rR ] dev-python/appdirs-1.4.3
[ebuild rR ] dev-python/pyparsing-2.2.0
[ebuild N ] dev-util/ninja-1.8.2
[ebuild rR ] sys-apps/texinfo-6.3
[ebuild rR ] app-editors/nano-2.8.7
[ebuild rR ] sys-devel/binutils-2.29.1-r1
[ebuild rR ] dev-libs/elfutils-0.170-r1
[ebuild rR ] sys-devel/bison-3.0.4-r1
[ebuild rR ] app-text/po4a-0.47-r1
[ebuild rR ] sys-devel/gcc-5.4.0-r4
[ebuild rR ] sys-apps/iproute2-4.14.1-r2
[ebuild rR ] sys-apps/man-db-2.7.6.1-r2
[ebuild rR ] sys-libs/pam-1.2.1-r2
[ebuild rR ] sys-apps/util-linux-2.30.2-r1
[ebuild rR ] sys-auth/pambase-20150213-r1
[ebuild rR ] sys-apps/s390-tools-1.36.1-r1
[ebuild rR ] dev-libs/glib-2.50.3-r1
[ebuild rR ] sys-apps/openrc-0.34.11
[ebuild r U ] sys-apps/shadow-4.6 [4.4-r2]
[ebuild rR ] dev-python/packaging-16.8
[ebuild R ] sys-apps/portage-2.3.8
[ebuild rR ] dev-python/setuptools-34.0.2-r1
[ebuild U ] dev-python/six-1.11.0 [1.10.0]
[ebuild rR ] dev-python/pyxattr-0.5.5
[ebuild rR ] dev-python/certifi-2017.4.17
[ebuild N ] dev-util/meson-0.46.0
[ebuild r U ] sys-fs/udev-236-r1 [233]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by @__auto_rebuild__ (argument)
=sys-apps/shadow-4.6 ~s390
# required by sys-fs/udev-236-r1::gentoo
# required by @__auto_rebuild__ (argument)
=dev-util/meson-0.46.0 ~s390
# required by @__auto_rebuild__ (argument)
=sys-libs/glibc-2.25-r11 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180510T071240Z/.catalyst_lock'
Command exited with non-zero status 1
44.76user 9.61system 0:59.31elapsed 91%CPU (0avgtext+0avgdata 189440maxresident)k
0inputs+0outputs (410major+2478422minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180510T071240Z.dxu8gH/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-05-11 7:16 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-05-11 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180511T071250Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180511T071250Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180511T071250Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180511T071250Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180511T071250Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180511T071250Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180511T071250Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180511T071250Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180511T071250Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180511T071250Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180511T071250Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180511T071250Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180511T071250Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180511T071250Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180511T071250Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
[ebuild r U ] sys-libs/glibc-2.25-r11 [2.25-r9]
[ebuild U ] sys-libs/ncurses-6.1-r2 [6.0-r1]
[ebuild U ] sys-apps/debianutils-4.8.3 [4.7]
[ebuild U ] dev-lang/python-exec-2.4.5 [2.4.4]
[ebuild U ] sys-devel/autoconf-wrapper-13-r1 [13]
[ebuild N ] dev-util/re2c-0.13.5-r1
[ebuild U ] net-libs/libnsl-0-r1 [0]
[ebuild rR ] sys-apps/less-529
[ebuild rR ] sys-libs/readline-6.3_p8-r3
[ebuild U ] net-misc/rsync-3.1.3 [3.1.2-r2]
[ebuild rR ] sys-process/procps-3.3.12
[ebuild U ] dev-lang/perl-5.24.3-r1 [5.24.3]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4 [7.100.200_rc-r3]
[ebuild U ] virtual/perl-File-Spec-3.630.100_rc-r4 [3.630.100_rc-r3]
[ebuild U ] virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r4 [1.441.700.100_rc-r3]
[ebuild U ] virtual/perl-JSON-PP-2.273.0.100_rc-r6 [2.273.0.100_rc-r5]
[ebuild U ] app-eselect/eselect-python-20171204 [20160516]
[ebuild U ] sys-devel/automake-1.15.1-r2 [1.15.1-r1]
[ebuild rR ] app-shells/bash-4.3_p48-r1
[ebuild U ] net-misc/netifrc-0.5.1 [0.2.2]
[ebuild U ] app-arch/xz-utils-5.2.3 [5.2.2]
[ebuild rR ] sys-kernel/linux-headers-4.13
[ebuild rR ] sys-apps/coreutils-8.26
[ebuild rR ] sys-apps/net-tools-1.60_p20161110235919
[ebuild rR ] app-portage/elt-patches-20170815
[ebuild rR ] sys-devel/m4-1.4.17
[ebuild U ] app-misc/pax-utils-1.2.3 [1.1.7]
[ebuild rR ] dev-util/gtk-doc-am-1.25-r1
[ebuild rR ] app-portage/portage-utils-0.62
[ebuild rR ] dev-libs/libltdl-2.4.6
[ebuild rR ] dev-libs/gmp-6.1.2
[ebuild rR ] sys-devel/gettext-0.19.8.1
[ebuild rR ] sys-devel/libtool-2.4.6-r3
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild U ] app-admin/eselect-1.4.11 [1.4.8]
[ebuild U ] sys-apps/kmod-24 [23]
[ebuild U ] sys-apps/sandbox-2.13 [2.10-r4]
[ebuild rR ] sys-process/psmisc-22.21-r3
[ebuild U ] app-misc/ca-certificates-20170717.3.36.1 [20161130.3.30.2]
[ebuild rR ] sys-apps/diffutils-3.3
[ebuild rR ] net-misc/wget-1.19.1-r2
[ebuild U ] sys-devel/flex-2.6.4-r1 [2.6.1]
[ebuild U ] dev-libs/libxslt-1.1.32 [1.1.30-r2]
[ebuild rR ] dev-python/appdirs-1.4.3
[ebuild rR ] dev-python/pyparsing-2.2.0
[ebuild N ] dev-util/ninja-1.8.2
[ebuild rR ] sys-apps/texinfo-6.3
[ebuild rR ] app-editors/nano-2.8.7
[ebuild rR ] sys-devel/binutils-2.29.1-r1
[ebuild rR ] dev-libs/elfutils-0.170-r1
[ebuild rR ] sys-devel/bison-3.0.4-r1
[ebuild rR ] app-text/po4a-0.47-r1
[ebuild rR ] sys-devel/gcc-5.4.0-r4
[ebuild rR ] sys-apps/iproute2-4.14.1-r2
[ebuild rR ] sys-apps/man-db-2.7.6.1-r2
[ebuild rR ] sys-libs/pam-1.2.1-r2
[ebuild rR ] sys-apps/util-linux-2.30.2-r1
[ebuild rR ] sys-auth/pambase-20150213-r1
[ebuild rR ] sys-apps/s390-tools-1.36.1-r1
[ebuild rR ] dev-libs/glib-2.50.3-r1
[ebuild rR ] sys-apps/openrc-0.34.11
[ebuild r U ] sys-apps/shadow-4.6 [4.4-r2]
[ebuild rR ] dev-python/packaging-16.8
[ebuild R ] sys-apps/portage-2.3.8
[ebuild rR ] dev-python/setuptools-34.0.2-r1
[ebuild U ] dev-python/six-1.11.0 [1.10.0]
[ebuild rR ] dev-python/certifi-2017.4.17
[ebuild rR ] dev-python/pyxattr-0.5.5
[ebuild N ] dev-util/meson-0.46.0
[ebuild r U ] sys-fs/udev-236-r1 [233]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by @__auto_rebuild__ (argument)
=sys-apps/shadow-4.6 ~s390
# required by @__auto_rebuild__ (argument)
=sys-libs/glibc-2.25-r11 ~s390
# required by sys-fs/udev-236-r1::gentoo
# required by @__auto_rebuild__ (argument)
=dev-util/meson-0.46.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180511T071250Z/.catalyst_lock'
Command exited with non-zero status 1
44.93user 10.27system 1:03.75elapsed 86%CPU (0avgtext+0avgdata 189424maxresident)k
0inputs+0outputs (435major+2480990minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180511T071250Z.7MW5yP/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-05-12 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-05-12 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage1.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180512T071224Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180512T071224Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180512T071224Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180512T071224Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180512T071224Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180512T071224Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180512T071224Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180512T071224Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180512T071224Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180512T071224Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180512T071224Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180512T071224Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180512T071224Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180512T071224Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180512T071224Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
The following packages are causing rebuilds:
(sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) causes rebuilds for:
(sys-apps/util-linux-2.30.2-r1:0/0::gentoo, ebuild scheduled for merge)
(dev-libs/libxml2-2.9.7:2/2::gentoo, ebuild scheduled for merge)
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, ebuild scheduled for merge)
(dev-libs/libpcre-8.42:3/3::gentoo, ebuild scheduled for merge)
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
(app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
(sys-apps/gawk-4.1.4:0/0::gentoo, ebuild scheduled for merge)
[ebuild U ] sys-libs/ncurses-6.1-r2 [6.0-r1]
[ebuild U ] dev-lang/python-exec-2.4.5 [2.4.4]
[ebuild U ] sys-devel/autoconf-wrapper-13-r1 [13]
[ebuild U ] sys-apps/debianutils-4.8.3 [4.7]
[ebuild U ] app-admin/eselect-1.4.11 [1.4.8]
[ebuild U ] app-eselect/eselect-python-20171204 [20160516]
[ebuild U ] app-arch/xz-utils-5.2.3 [5.2.2]
[ebuild U ] sys-devel/flex-2.6.4-r1 [2.6.1]
[ebuild r U ] sys-libs/readline-7.0_p3 [6.3_p8-r3]
[ebuild U ] net-misc/rsync-3.1.3 [3.1.2-r2]
[ebuild U ] app-misc/pax-utils-1.2.3 [1.1.7]
[ebuild rR ] sys-apps/util-linux-2.30.2-r1
[ebuild U ] app-shells/bash-4.4_p12 [4.3_p48-r1]
[ebuild r U ] sys-apps/gawk-4.1.4 [4.1.3]
[ebuild r U ] dev-libs/libpcre-8.42 [8.40-r1]
[ebuild U ] sys-apps/sandbox-2.13 [2.10-r4]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4 [7.100.200_rc-r3]
[ebuild U ] dev-lang/perl-5.24.3-r1 [5.24.3]
[ebuild U ] sys-devel/automake-1.15.1-r2 [1.15.1-r1]
[ebuild rR ] dev-libs/libxml2-2.9.7
[ebuild rR ] sys-libs/gdbm-1.13-r2
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild U ] dev-libs/libxslt-1.1.32 [1.1.30-r2]
[ebuild U ] dev-python/six-1.11.0 [1.10.0]
[ebuild U ] app-misc/ca-certificates-20170717.3.36.1 [20161130.3.30.2]
[ebuild R ] sys-apps/portage-2.3.8
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by dev-libs/glib-2.50.3-r1::gentoo
# required by x11-misc/shared-mime-info-1.4::gentoo
=dev-libs/libpcre-8.42 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
* In order to avoid wasting time, backtracking has terminated early
* due to the above autounmask change(s). The --autounmask-backtrack=y
* option can be used to force further backtracking, but there is no
* guarantee that it will produce a solution.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180512T071224Z/.catalyst_lock'
Command exited with non-zero status 1
45.37user 10.87system 1:09.99elapsed 80%CPU (0avgtext+0avgdata 177712maxresident)k
0inputs+0outputs (445major+2486500minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180512T071224Z.WMh0OD/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-05-13 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-05-13 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage1.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180513T071135Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180513T071135Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180513T071135Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180513T071135Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180513T071135Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180513T071135Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180513T071135Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180513T071135Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180513T071135Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180513T071135Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180513T071135Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180513T071135Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180513T071135Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180513T071135Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180513T071135Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
The following packages are causing rebuilds:
(sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) causes rebuilds for:
(dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, ebuild scheduled for merge)
(dev-libs/libpcre-8.42:3/3::gentoo, ebuild scheduled for merge)
(sys-apps/gawk-4.1.4:0/0::gentoo, ebuild scheduled for merge)
(dev-libs/libxml2-2.9.7:2/2::gentoo, ebuild scheduled for merge)
(app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
(sys-apps/util-linux-2.30.2-r1:0/0::gentoo, ebuild scheduled for merge)
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge)
[ebuild U ] sys-libs/ncurses-6.1-r2 [6.0-r1]
[ebuild U ] dev-lang/python-exec-2.4.5 [2.4.4]
[ebuild U ] sys-devel/autoconf-wrapper-13-r1 [13]
[ebuild U ] sys-apps/debianutils-4.8.3 [4.7]
[ebuild U ] app-admin/eselect-1.4.11 [1.4.8]
[ebuild U ] app-eselect/eselect-python-20171204 [20160516]
[ebuild U ] app-arch/xz-utils-5.2.3 [5.2.2]
[ebuild U ] sys-devel/flex-2.6.4-r1 [2.6.1]
[ebuild r U ] sys-libs/readline-7.0_p3 [6.3_p8-r3]
[ebuild U ] net-misc/rsync-3.1.3 [3.1.2-r2]
[ebuild U ] app-misc/pax-utils-1.2.3 [1.1.7]
[ebuild rR ] sys-apps/util-linux-2.30.2-r1
[ebuild U ] app-shells/bash-4.4_p12 [4.3_p48-r1]
[ebuild r U ] sys-apps/gawk-4.1.4 [4.1.3]
[ebuild r U ] dev-libs/libpcre-8.42 [8.40-r1]
[ebuild U ] sys-apps/sandbox-2.13 [2.10-r4]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4 [7.100.200_rc-r3]
[ebuild U ] dev-lang/perl-5.24.3-r1 [5.24.3]
[ebuild U ] sys-devel/automake-1.15.1-r2 [1.15.1-r1]
[ebuild rR ] dev-libs/libxml2-2.9.7
[ebuild rR ] sys-libs/gdbm-1.13-r2
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild U ] dev-libs/libxslt-1.1.32 [1.1.30-r2]
[ebuild U ] dev-python/six-1.11.0 [1.10.0]
[ebuild U ] app-misc/ca-certificates-20170717.3.36.1 [20161130.3.30.2]
[ebuild R ] sys-apps/portage-2.3.8
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by dev-libs/glib-2.50.3-r1::gentoo
# required by dev-util/pkgconfig-0.29.2::gentoo[-internal-glib]
# required by virtual/pkgconfig-0-r1::gentoo
# required by app-misc/pax-utils-1.2.3::gentoo
# required by sys-apps/sandbox-2.13::gentoo
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3-r1::gentoo
# required by virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4::gentoo
# required by dev-perl/TermReadKey-2.330.0::gentoo
# required by app-text/po4a-0.47-r1::gentoo
# required by sys-apps/man-db-2.7.6.1-r2::gentoo[nls]
# required by virtual/man-0-r1::gentoo
# required by @system
# required by @world (argument)
=dev-libs/libpcre-8.42 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
* In order to avoid wasting time, backtracking has terminated early
* due to the above autounmask change(s). The --autounmask-backtrack=y
* option can be used to force further backtracking, but there is no
* guarantee that it will produce a solution.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180513T071135Z/.catalyst_lock'
Command exited with non-zero status 1
44.78user 11.11system 1:12.76elapsed 76%CPU (0avgtext+0avgdata 177616maxresident)k
0inputs+0outputs (427major+2476239minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180513T071135Z.JBudRO/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-05-14 7:16 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-05-14 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage1.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180514T071240Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180514T071240Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180514T071240Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180514T071240Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180514T071240Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180514T071240Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180514T071240Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180514T071240Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180514T071240Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180514T071240Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180514T071240Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180514T071240Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180514T071240Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180514T071240Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180514T071240Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
The following packages are causing rebuilds:
(sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) causes rebuilds for:
(app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
(dev-libs/libxml2-2.9.7:2/2::gentoo, ebuild scheduled for merge)
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, ebuild scheduled for merge)
(dev-libs/libpcre-8.42:3/3::gentoo, ebuild scheduled for merge)
(sys-apps/gawk-4.1.4:0/0::gentoo, ebuild scheduled for merge)
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
(sys-apps/util-linux-2.30.2-r1:0/0::gentoo, ebuild scheduled for merge)
[ebuild U ] sys-libs/ncurses-6.1-r2 [6.0-r1]
[ebuild U ] dev-lang/python-exec-2.4.5 [2.4.4]
[ebuild U ] sys-devel/autoconf-wrapper-13-r1 [13]
[ebuild U ] sys-apps/debianutils-4.8.3 [4.7]
[ebuild U ] app-admin/eselect-1.4.11 [1.4.8]
[ebuild U ] app-eselect/eselect-python-20171204 [20160516]
[ebuild U ] app-arch/xz-utils-5.2.3 [5.2.2]
[ebuild U ] sys-devel/flex-2.6.4-r1 [2.6.1]
[ebuild r U ] sys-libs/readline-7.0_p3 [6.3_p8-r3]
[ebuild U ] net-misc/rsync-3.1.3 [3.1.2-r2]
[ebuild U ] app-misc/pax-utils-1.2.3 [1.1.7]
[ebuild rR ] sys-apps/util-linux-2.30.2-r1
[ebuild U ] app-shells/bash-4.4_p12 [4.3_p48-r1]
[ebuild r U ] sys-apps/gawk-4.1.4 [4.1.3]
[ebuild r U ] dev-libs/libpcre-8.42 [8.40-r1]
[ebuild U ] sys-apps/sandbox-2.13 [2.10-r4]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4 [7.100.200_rc-r3]
[ebuild U ] dev-lang/perl-5.24.3-r1 [5.24.3]
[ebuild U ] sys-devel/automake-1.15.1-r2 [1.15.1-r1]
[ebuild rR ] dev-libs/libxml2-2.9.7
[ebuild rR ] sys-libs/gdbm-1.13-r2
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild U ] dev-libs/libxslt-1.1.32 [1.1.30-r2]
[ebuild U ] dev-python/six-1.11.0 [1.10.0]
[ebuild U ] app-misc/ca-certificates-20170717.3.36.1 [20161130.3.30.2]
[ebuild R ] sys-apps/portage-2.3.8
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by @__auto_slot_operator_replace_installed__ (argument)
=dev-libs/libpcre-8.42 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
* In order to avoid wasting time, backtracking has terminated early
* due to the above autounmask change(s). The --autounmask-backtrack=y
* option can be used to force further backtracking, but there is no
* guarantee that it will produce a solution.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180514T071240Z/.catalyst_lock'
Command exited with non-zero status 1
45.16user 11.33system 1:10.11elapsed 80%CPU (0avgtext+0avgdata 175824maxresident)k
0inputs+0outputs (431major+2478688minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180514T071240Z.q9f2VF/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-05-15 7:23 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-05-15 7:23 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage1.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180515T071525Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180515T071525Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180515T071525Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180515T071525Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180515T071525Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180515T071525Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180515T071525Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180515T071525Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180515T071525Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180515T071525Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180515T071525Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180515T071525Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180515T071525Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180515T071525Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180515T071525Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
The following packages are causing rebuilds:
(sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) causes rebuilds for:
(sys-apps/gawk-4.1.4:0/0::gentoo, ebuild scheduled for merge)
(dev-libs/libpcre-8.42:3/3::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, ebuild scheduled for merge)
(dev-libs/libxml2-2.9.7:2/2::gentoo, ebuild scheduled for merge)
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
(sys-apps/util-linux-2.30.2-r1:0/0::gentoo, ebuild scheduled for merge)
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge)
(app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
[ebuild U ] sys-libs/ncurses-6.1-r2 [6.0-r1]
[ebuild U ] dev-lang/python-exec-2.4.5 [2.4.4]
[ebuild U ] sys-devel/autoconf-wrapper-13-r1 [13]
[ebuild U ] sys-apps/debianutils-4.8.3 [4.7]
[ebuild U ] app-admin/eselect-1.4.11 [1.4.8]
[ebuild U ] app-eselect/eselect-python-20171204 [20160516]
[ebuild U ] app-arch/xz-utils-5.2.3 [5.2.2]
[ebuild U ] sys-devel/flex-2.6.4-r1 [2.6.1]
[ebuild r U ] sys-libs/readline-7.0_p3 [6.3_p8-r3]
[ebuild U ] net-misc/rsync-3.1.3 [3.1.2-r2]
[ebuild U ] app-misc/pax-utils-1.2.3 [1.1.7]
[ebuild rR ] sys-apps/util-linux-2.30.2-r1
[ebuild U ] app-shells/bash-4.4_p12 [4.3_p48-r1]
[ebuild r U ] sys-apps/gawk-4.1.4 [4.1.3]
[ebuild r U ] dev-libs/libpcre-8.42 [8.40-r1]
[ebuild U ] sys-apps/sandbox-2.13 [2.10-r4]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4 [7.100.200_rc-r3]
[ebuild U ] dev-lang/perl-5.24.3-r1 [5.24.3]
[ebuild U ] sys-devel/automake-1.15.1-r2 [1.15.1-r1]
[ebuild rR ] dev-libs/libxml2-2.9.7
[ebuild rR ] sys-libs/gdbm-1.13-r2
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild U ] dev-libs/libxslt-1.1.32 [1.1.30-r2]
[ebuild U ] dev-python/six-1.11.0 [1.10.0]
[ebuild U ] app-misc/ca-certificates-20170717.3.36.1 [20161130.3.30.2]
[ebuild R ] sys-apps/portage-2.3.8
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by @__auto_slot_operator_replace_installed__ (argument)
=dev-libs/libpcre-8.42 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
* In order to avoid wasting time, backtracking has terminated early
* due to the above autounmask change(s). The --autounmask-backtrack=y
* option can be used to force further backtracking, but there is no
* guarantee that it will produce a solution.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180515T071525Z/.catalyst_lock'
Command exited with non-zero status 1
45.74user 12.44system 3:00.23elapsed 32%CPU (0avgtext+0avgdata 176432maxresident)k
0inputs+0outputs (421major+2496179minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180515T071525Z.Tkone4/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-05-16 7:16 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-05-16 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage1.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180516T071320Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180516T071320Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180516T071320Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180516T071320Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180516T071320Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180516T071320Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180516T071320Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180516T071320Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180516T071320Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180516T071320Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180516T071320Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180516T071320Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180516T071320Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180516T071320Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180516T071320Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
The following packages are causing rebuilds:
(sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) causes rebuilds for:
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge)
(dev-libs/libxml2-2.9.7:2/2::gentoo, ebuild scheduled for merge)
(app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, ebuild scheduled for merge)
(dev-libs/libpcre-8.42:3/3::gentoo, ebuild scheduled for merge)
(sys-apps/gawk-4.1.4:0/0::gentoo, ebuild scheduled for merge)
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
(sys-apps/util-linux-2.30.2-r1:0/0::gentoo, ebuild scheduled for merge)
[ebuild U ] sys-libs/ncurses-6.1-r2 [6.0-r1]
[ebuild U ] dev-lang/python-exec-2.4.5 [2.4.4]
[ebuild U ] sys-devel/autoconf-wrapper-13-r1 [13]
[ebuild U ] sys-apps/debianutils-4.8.3 [4.7]
[ebuild U ] app-admin/eselect-1.4.11 [1.4.8]
[ebuild U ] app-eselect/eselect-python-20171204 [20160516]
[ebuild U ] app-arch/xz-utils-5.2.3 [5.2.2]
[ebuild U ] sys-devel/flex-2.6.4-r1 [2.6.1]
[ebuild r U ] sys-libs/readline-7.0_p3 [6.3_p8-r3]
[ebuild U ] net-misc/rsync-3.1.3 [3.1.2-r2]
[ebuild U ] app-misc/pax-utils-1.2.3 [1.1.7]
[ebuild rR ] sys-apps/util-linux-2.30.2-r1
[ebuild U ] app-shells/bash-4.4_p12 [4.3_p48-r1]
[ebuild r U ] sys-apps/gawk-4.1.4 [4.1.3]
[ebuild r U ] dev-libs/libpcre-8.42 [8.40-r1]
[ebuild U ] sys-apps/sandbox-2.13 [2.10-r4]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4 [7.100.200_rc-r3]
[ebuild U ] dev-lang/perl-5.24.3-r1 [5.24.3]
[ebuild U ] sys-devel/automake-1.15.1-r2 [1.15.1-r1]
[ebuild rR ] dev-libs/libxml2-2.9.7
[ebuild rR ] sys-libs/gdbm-1.13-r2
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild U ] dev-libs/libxslt-1.1.32 [1.1.30-r2]
[ebuild U ] dev-python/six-1.11.0 [1.10.0]
[ebuild U ] app-misc/ca-certificates-20170717.3.36.1 [20161130.3.30.2]
[ebuild R ] sys-apps/portage-2.3.8
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by @__auto_slot_operator_replace_installed__ (argument)
=dev-libs/libpcre-8.42 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
* In order to avoid wasting time, backtracking has terminated early
* due to the above autounmask change(s). The --autounmask-backtrack=y
* option can be used to force further backtracking, but there is no
* guarantee that it will produce a solution.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180516T071320Z/.catalyst_lock'
Command exited with non-zero status 1
43.64user 9.71system 1:00.63elapsed 88%CPU (0avgtext+0avgdata 175936maxresident)k
0inputs+0outputs (421major+2476115minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180516T071320Z.KdmSR2/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-05-17 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-05-17 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage1.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180517T071229Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180517T071229Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180517T071229Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180517T071229Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180517T071229Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180517T071229Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180517T071229Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180517T071229Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180517T071229Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180517T071229Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180517T071229Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180517T071229Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180517T071229Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180517T071229Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180517T071229Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
The following packages are causing rebuilds:
(sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) causes rebuilds for:
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
(sys-apps/util-linux-2.30.2-r1:0/0::gentoo, ebuild scheduled for merge)
(sys-apps/gawk-4.1.4:0/0::gentoo, ebuild scheduled for merge)
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge)
(dev-libs/libpcre-8.42:3/3::gentoo, ebuild scheduled for merge)
(dev-libs/libxml2-2.9.7:2/2::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, ebuild scheduled for merge)
(app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
[ebuild U ] sys-libs/ncurses-6.1-r2 [6.0-r1]
[ebuild U ] dev-lang/python-exec-2.4.5 [2.4.4]
[ebuild U ] sys-devel/autoconf-wrapper-13-r1 [13]
[ebuild U ] sys-apps/debianutils-4.8.3 [4.7]
[ebuild U ] app-admin/eselect-1.4.11 [1.4.8]
[ebuild U ] app-eselect/eselect-python-20171204 [20160516]
[ebuild U ] app-arch/xz-utils-5.2.3 [5.2.2]
[ebuild U ] sys-devel/flex-2.6.4-r1 [2.6.1]
[ebuild r U ] sys-libs/readline-7.0_p3 [6.3_p8-r3]
[ebuild U ] net-misc/rsync-3.1.3 [3.1.2-r2]
[ebuild U ] app-misc/pax-utils-1.2.3 [1.1.7]
[ebuild rR ] sys-apps/util-linux-2.30.2-r1
[ebuild U ] app-shells/bash-4.4_p12 [4.3_p48-r1]
[ebuild r U ] sys-apps/gawk-4.1.4 [4.1.3]
[ebuild r U ] dev-libs/libpcre-8.42 [8.40-r1]
[ebuild U ] sys-apps/sandbox-2.13 [2.10-r4]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4 [7.100.200_rc-r3]
[ebuild U ] dev-lang/perl-5.24.3-r1 [5.24.3]
[ebuild U ] sys-devel/automake-1.15.1-r2 [1.15.1-r1]
[ebuild rR ] dev-libs/libxml2-2.9.7
[ebuild rR ] sys-libs/gdbm-1.13-r2
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild U ] dev-libs/libxslt-1.1.32 [1.1.30-r2]
[ebuild U ] dev-python/six-1.11.0 [1.10.0]
[ebuild U ] app-misc/ca-certificates-20170717.3.36.1 [20161130.3.30.2]
[ebuild R ] sys-apps/portage-2.3.8
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by dev-libs/glib-2.50.3-r1::gentoo
# required by x11-misc/shared-mime-info-1.4::gentoo
=dev-libs/libpcre-8.42 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
* In order to avoid wasting time, backtracking has terminated early
* due to the above autounmask change(s). The --autounmask-backtrack=y
* option can be used to force further backtracking, but there is no
* guarantee that it will produce a solution.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180517T071229Z/.catalyst_lock'
Command exited with non-zero status 1
43.78user 9.74system 1:00.75elapsed 88%CPU (0avgtext+0avgdata 176496maxresident)k
0inputs+0outputs (418major+2477719minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180517T071229Z.mUNFTU/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-05-18 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-05-18 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage1.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180518T071223Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180518T071223Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180518T071223Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180518T071223Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180518T071223Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180518T071223Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180518T071223Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180518T071223Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180518T071223Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180518T071223Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180518T071223Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180518T071223Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180518T071223Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180518T071223Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180518T071223Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
The following packages are causing rebuilds:
(sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) causes rebuilds for:
(dev-libs/libpcre-8.42:3/3::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, ebuild scheduled for merge)
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
(sys-apps/gawk-4.1.4:0/0::gentoo, ebuild scheduled for merge)
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge)
(dev-libs/libxml2-2.9.7:2/2::gentoo, ebuild scheduled for merge)
(app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
(sys-apps/util-linux-2.30.2-r1:0/0::gentoo, ebuild scheduled for merge)
[ebuild U ] sys-libs/ncurses-6.1-r2 [6.0-r1]
[ebuild U ] dev-lang/python-exec-2.4.5 [2.4.4]
[ebuild U ] sys-devel/autoconf-wrapper-13-r1 [13]
[ebuild U ] sys-apps/debianutils-4.8.3 [4.7]
[ebuild U ] app-admin/eselect-1.4.11 [1.4.8]
[ebuild U ] app-eselect/eselect-python-20171204 [20160516]
[ebuild U ] app-arch/xz-utils-5.2.3 [5.2.2]
[ebuild U ] sys-devel/flex-2.6.4-r1 [2.6.1]
[ebuild r U ] sys-libs/readline-7.0_p3 [6.3_p8-r3]
[ebuild U ] net-misc/rsync-3.1.3 [3.1.2-r2]
[ebuild U ] app-misc/pax-utils-1.2.3 [1.1.7]
[ebuild rR ] sys-apps/util-linux-2.30.2-r1
[ebuild U ] app-shells/bash-4.4_p12 [4.3_p48-r1]
[ebuild r U ] sys-apps/gawk-4.1.4 [4.1.3]
[ebuild r U ] dev-libs/libpcre-8.42 [8.40-r1]
[ebuild U ] sys-apps/sandbox-2.13 [2.10-r4]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4 [7.100.200_rc-r3]
[ebuild U ] dev-lang/perl-5.24.3-r1 [5.24.3]
[ebuild U ] sys-devel/automake-1.15.1-r2 [1.15.1-r1]
[ebuild rR ] dev-libs/libxml2-2.9.7
[ebuild rR ] sys-libs/gdbm-1.13-r2
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild U ] dev-libs/libxslt-1.1.32 [1.1.30-r2]
[ebuild U ] dev-python/six-1.11.0 [1.10.0]
[ebuild U ] app-misc/ca-certificates-20170717.3.36.1 [20161130.3.30.2]
[ebuild R ] sys-apps/portage-2.3.8
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by @__auto_slot_operator_replace_installed__ (argument)
=dev-libs/libpcre-8.42 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
* In order to avoid wasting time, backtracking has terminated early
* due to the above autounmask change(s). The --autounmask-backtrack=y
* option can be used to force further backtracking, but there is no
* guarantee that it will produce a solution.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180518T071223Z/.catalyst_lock'
Command exited with non-zero status 1
43.88user 10.04system 1:02.48elapsed 86%CPU (0avgtext+0avgdata 176960maxresident)k
0inputs+0outputs (429major+2481654minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180518T071223Z.zbkZjR/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-05-19 7:16 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-05-19 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180519T071224Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180519T071224Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180519T071224Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180519T071224Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180519T071224Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180519T071224Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180519T071224Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180519T071224Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180519T071224Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180519T071224Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180519T071224Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180519T071224Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180519T071224Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180519T071224Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180519T071224Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
The following packages are causing rebuilds:
(sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) causes rebuilds for:
(sys-apps/gawk-4.1.4:0/0::gentoo, ebuild scheduled for merge)
(dev-libs/libpcre-8.41-r1:3/3::gentoo, ebuild scheduled for merge)
(app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge)
(dev-libs/libxml2-2.9.7:2/2::gentoo, ebuild scheduled for merge)
(sys-apps/util-linux-2.30.2-r1:0/0::gentoo, ebuild scheduled for merge)
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, ebuild scheduled for merge)
[ebuild r U ] sys-libs/glibc-2.25-r11 [2.25-r9]
[ebuild U ] sys-libs/ncurses-6.1-r2 [6.0-r1]
[ebuild U ] sys-apps/debianutils-4.8.3 [4.7]
[ebuild U ] dev-lang/python-exec-2.4.5 [2.4.4]
[ebuild U ] sys-devel/autoconf-wrapper-13-r1 [13]
[ebuild N ] dev-util/re2c-0.13.5-r1
[ebuild U ] net-libs/libnsl-0-r1 [0]
[ebuild r U ] sys-libs/readline-7.0_p3 [6.3_p8-r3]
[ebuild U ] net-misc/rsync-3.1.3 [3.1.2-r2]
[ebuild rR ] sys-process/procps-3.3.12
[ebuild U ] app-shells/bash-4.4_p12 [4.3_p48-r1]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4 [7.100.200_rc-r3]
[ebuild U ] app-eselect/eselect-python-20171204 [20160516]
[ebuild U ] virtual/perl-File-Spec-3.630.100_rc-r4 [3.630.100_rc-r3]
[ebuild U ] virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r4 [1.441.700.100_rc-r3]
[ebuild U ] sys-apps/hwids-20171003 [20170328]
[ebuild U ] net-misc/netifrc-0.5.1 [0.2.2]
[ebuild U ] virtual/perl-JSON-PP-2.273.0.100_rc-r6 [2.273.0.100_rc-r5]
[ebuild U ] app-arch/xz-utils-5.2.3 [5.2.2]
[ebuild rR ] sys-apps/coreutils-8.26
[ebuild rR ] sys-apps/net-tools-1.60_p20161110235919
[ebuild rR ] app-portage/elt-patches-20170815
[ebuild rR ] sys-devel/m4-1.4.17
[ebuild U ] app-misc/pax-utils-1.2.3 [1.1.7]
[ebuild rR ] app-portage/portage-utils-0.62
[ebuild rR ] dev-libs/libltdl-2.4.6
[ebuild U ] dev-libs/libpcre-8.41-r1 [8.40-r1]
[ebuild rR ] dev-libs/gmp-6.1.2
[ebuild U ] app-admin/eselect-1.4.11 [1.4.8]
[ebuild U ] sys-apps/kmod-24 [23]
[ebuild U ] sys-apps/sandbox-2.13 [2.10-r4]
[ebuild rR ] sys-apps/less-529
[ebuild rR ] sys-auth/pambase-20150213-r1
[ebuild rR ] sys-kernel/linux-headers-4.13
[ebuild rR ] sys-apps/util-linux-2.30.2-r1
[ebuild rR ] sys-apps/s390-tools-1.36.1-r1
[ebuild rR ] sys-devel/binutils-2.29.1-r1
[ebuild rR ] sys-process/psmisc-22.21-r3
[ebuild rR ] sys-apps/openrc-0.34.11
[ebuild U ] dev-lang/perl-5.24.3-r1 [5.24.3]
[ebuild U ] sys-devel/automake-1.15.1-r2 [1.15.1-r1]
[ebuild rR ] dev-util/gtk-doc-am-1.25-r1
[ebuild rR ] sys-devel/libtool-2.4.6-r3
[ebuild rR ] dev-libs/libxml2-2.9.7
[ebuild rR ] sys-libs/gdbm-1.13-r2
[ebuild rR ] sys-devel/gettext-0.19.8.1
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild U ] dev-libs/libxslt-1.1.32 [1.1.30-r2]
[ebuild U ] app-misc/ca-certificates-20170717.3.36.1 [20161130.3.30.2]
[ebuild rR ] sys-apps/grep-3.0
[ebuild r U ] net-misc/wget-1.19.5 [1.19.1-r2]
[ebuild rR ] sys-apps/diffutils-3.3
[ebuild r U ] sys-apps/gawk-4.1.4 [4.1.3]
[ebuild U ] sys-devel/flex-2.6.4-r1 [2.6.1]
[ebuild rR ] dev-libs/glib-2.50.3-r1
[ebuild rR ] app-text/po4a-0.47-r1
[ebuild rR ] dev-python/appdirs-1.4.3
[ebuild rR ] dev-python/pyparsing-2.2.0
[ebuild N ] dev-util/ninja-1.8.2
[ebuild rR ] app-editors/nano-2.8.7
[ebuild r U ] sys-apps/shadow-4.6 [4.4-r2]
[ebuild rR ] sys-apps/texinfo-6.3
[ebuild rR ] sys-libs/pam-1.2.1-r2
[ebuild rR ] dev-libs/elfutils-0.170-r1
[ebuild rR ] sys-devel/bison-3.0.4-r1
[ebuild rR ] sys-apps/man-db-2.7.6.1-r2
[ebuild rR ] sys-devel/gcc-5.4.0-r4
[ebuild rR ] sys-apps/iproute2-4.14.1-r2
[ebuild rR ] dev-python/packaging-16.8
[ebuild R ] sys-apps/portage-2.3.8
[ebuild rR ] dev-python/setuptools-34.0.2-r1
[ebuild U ] dev-python/six-1.11.0 [1.10.0]
[ebuild rR ] dev-python/pyxattr-0.5.5
[ebuild rR ] dev-python/certifi-2017.4.17
[ebuild N ] dev-util/meson-0.46.0
[ebuild r U ] sys-fs/udev-236-r1 [233]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by @__auto_rebuild__ (argument)
=sys-libs/glibc-2.25-r11 ~s390
# required by sys-fs/udev-236-r1::gentoo
# required by @__auto_rebuild__ (argument)
=dev-util/meson-0.46.0 ~s390
# required by @__auto_rebuild__ (argument)
=sys-apps/shadow-4.6 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
* In order to avoid wasting time, backtracking has terminated early
* due to the above autounmask change(s). The --autounmask-backtrack=y
* option can be used to force further backtracking, but there is no
* guarantee that it will produce a solution.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180519T071224Z/.catalyst_lock'
Command exited with non-zero status 1
47.39user 11.35system 1:22.21elapsed 71%CPU (0avgtext+0avgdata 178176maxresident)k
0inputs+0outputs (426major+2475423minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180519T071224Z.S9GVPj/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-05-20 7:23 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-05-20 7:23 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180520T071338Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180520T071338Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180520T071338Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180520T071338Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180520T071338Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180520T071338Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180520T071338Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180520T071338Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180520T071338Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180520T071338Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180520T071338Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180520T071338Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180520T071338Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180520T071338Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180520T071338Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
The following packages are causing rebuilds:
(sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) causes rebuilds for:
(dev-libs/libxml2-2.9.7:2/2::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, ebuild scheduled for merge)
(dev-libs/libpcre-8.41-r1:3/3::gentoo, ebuild scheduled for merge)
(sys-apps/util-linux-2.30.2-r1:0/0::gentoo, ebuild scheduled for merge)
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge)
(sys-apps/gawk-4.1.4:0/0::gentoo, ebuild scheduled for merge)
(app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
[ebuild r U ] sys-libs/glibc-2.25-r11 [2.25-r9]
[ebuild U ] sys-libs/ncurses-6.1-r2 [6.0-r1]
[ebuild U ] sys-apps/debianutils-4.8.3 [4.7]
[ebuild U ] dev-lang/python-exec-2.4.5 [2.4.4]
[ebuild U ] sys-devel/autoconf-wrapper-13-r1 [13]
[ebuild U ] net-libs/libnsl-0-r1 [0]
[ebuild N ] dev-util/re2c-0.13.5-r1
[ebuild r U ] sys-libs/readline-7.0_p3 [6.3_p8-r3]
[ebuild U ] net-misc/rsync-3.1.3 [3.1.2-r2]
[ebuild rR ] sys-process/procps-3.3.12
[ebuild U ] app-shells/bash-4.4_p12 [4.3_p48-r1]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4 [7.100.200_rc-r3]
[ebuild U ] app-eselect/eselect-python-20171204 [20160516]
[ebuild U ] sys-apps/hwids-20171003 [20170328]
[ebuild U ] virtual/perl-File-Spec-3.630.100_rc-r4 [3.630.100_rc-r3]
[ebuild U ] virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r4 [1.441.700.100_rc-r3]
[ebuild U ] net-misc/netifrc-0.5.1 [0.2.2]
[ebuild U ] virtual/perl-JSON-PP-2.273.0.100_rc-r6 [2.273.0.100_rc-r5]
[ebuild U ] app-arch/xz-utils-5.2.3 [5.2.2]
[ebuild rR ] sys-apps/coreutils-8.26
[ebuild rR ] sys-apps/net-tools-1.60_p20161110235919
[ebuild rR ] app-portage/elt-patches-20170815
[ebuild rR ] sys-devel/m4-1.4.17
[ebuild U ] app-misc/pax-utils-1.2.3 [1.1.7]
[ebuild rR ] app-portage/portage-utils-0.62
[ebuild rR ] dev-libs/libltdl-2.4.6
[ebuild U ] dev-libs/libpcre-8.41-r1 [8.40-r1]
[ebuild rR ] dev-libs/gmp-6.1.2
[ebuild U ] app-admin/eselect-1.4.11 [1.4.8]
[ebuild U ] sys-apps/kmod-24 [23]
[ebuild U ] sys-apps/sandbox-2.13 [2.10-r4]
[ebuild rR ] sys-apps/less-529
[ebuild rR ] sys-auth/pambase-20150213-r1
[ebuild rR ] sys-kernel/linux-headers-4.13
[ebuild rR ] sys-apps/util-linux-2.30.2-r1
[ebuild rR ] sys-apps/s390-tools-1.36.1-r1
[ebuild rR ] sys-devel/binutils-2.29.1-r1
[ebuild rR ] sys-process/psmisc-22.21-r3
[ebuild rR ] sys-apps/openrc-0.34.11
[ebuild U ] dev-lang/perl-5.24.3-r1 [5.24.3]
[ebuild U ] sys-devel/automake-1.15.1-r2 [1.15.1-r1]
[ebuild rR ] dev-util/gtk-doc-am-1.25-r1
[ebuild rR ] sys-devel/libtool-2.4.6-r3
[ebuild rR ] dev-libs/libxml2-2.9.7
[ebuild rR ] sys-libs/gdbm-1.13-r2
[ebuild rR ] sys-devel/gettext-0.19.8.1
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild U ] dev-libs/libxslt-1.1.32 [1.1.30-r2]
[ebuild U ] app-misc/ca-certificates-20170717.3.36.1 [20161130.3.30.2]
[ebuild r U ] sys-apps/gawk-4.1.4 [4.1.3]
[ebuild rR ] sys-apps/diffutils-3.3
[ebuild r U ] net-misc/wget-1.19.5 [1.19.1-r2]
[ebuild rR ] sys-apps/grep-3.0
[ebuild U ] sys-devel/flex-2.6.4-r1 [2.6.1]
[ebuild rR ] dev-libs/glib-2.50.3-r1
[ebuild rR ] dev-python/pyparsing-2.2.0
[ebuild rR ] app-text/po4a-0.47-r1
[ebuild rR ] dev-python/appdirs-1.4.3
[ebuild N ] dev-util/ninja-1.8.2
[ebuild r U ] sys-apps/shadow-4.6 [4.4-r2]
[ebuild rR ] app-editors/nano-2.8.7
[ebuild rR ] sys-apps/texinfo-6.3
[ebuild rR ] sys-libs/pam-1.2.1-r2
[ebuild rR ] dev-libs/elfutils-0.170-r1
[ebuild rR ] sys-devel/bison-3.0.4-r1
[ebuild rR ] sys-apps/man-db-2.7.6.1-r2
[ebuild rR ] sys-devel/gcc-5.4.0-r4
[ebuild rR ] sys-apps/iproute2-4.14.1-r2
[ebuild rR ] dev-python/packaging-16.8
[ebuild R ] sys-apps/portage-2.3.8
[ebuild rR ] dev-python/setuptools-34.0.2-r1
[ebuild U ] dev-python/six-1.11.0 [1.10.0]
[ebuild rR ] dev-python/certifi-2017.4.17
[ebuild rR ] dev-python/pyxattr-0.5.5
[ebuild N ] dev-util/meson-0.46.1
[ebuild r U ] sys-fs/udev-236-r1 [233]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by @__auto_rebuild__ (argument)
=sys-apps/shadow-4.6 ~s390
# required by sys-fs/udev-236-r1::gentoo
# required by @__auto_rebuild__ (argument)
=dev-util/meson-0.46.1 ~s390
# required by @__auto_rebuild__ (argument)
=sys-libs/glibc-2.25-r11 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
* In order to avoid wasting time, backtracking has terminated early
* due to the above autounmask change(s). The --autounmask-backtrack=y
* option can be used to force further backtracking, but there is no
* guarantee that it will produce a solution.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180520T071338Z/.catalyst_lock'
Command exited with non-zero status 1
48.49user 12.55system 3:03.66elapsed 33%CPU (0avgtext+0avgdata 178336maxresident)k
0inputs+0outputs (509major+2492415minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180520T071338Z.Tl0kKQ/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-05-21 7:16 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-05-21 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180521T071234Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180521T071234Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180521T071234Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180521T071234Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180521T071234Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180521T071234Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180521T071234Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180521T071234Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180521T071234Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180521T071234Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180521T071234Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180521T071234Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180521T071234Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180521T071234Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180521T071234Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
The following packages are causing rebuilds:
(sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) causes rebuilds for:
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
(sys-apps/util-linux-2.30.2-r1:0/0::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, ebuild scheduled for merge)
(dev-libs/libxml2-2.9.7:2/2::gentoo, ebuild scheduled for merge)
(dev-libs/libpcre-8.41-r1:3/3::gentoo, ebuild scheduled for merge)
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge)
(app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
(sys-apps/gawk-4.1.4:0/0::gentoo, ebuild scheduled for merge)
[ebuild r U ] sys-libs/glibc-2.25-r11 [2.25-r9]
[ebuild U ] sys-libs/ncurses-6.1-r2 [6.0-r1]
[ebuild U ] sys-apps/debianutils-4.8.3 [4.7]
[ebuild U ] dev-lang/python-exec-2.4.5 [2.4.4]
[ebuild U ] sys-devel/autoconf-wrapper-13-r1 [13]
[ebuild N ] dev-util/re2c-0.13.5-r1
[ebuild U ] net-libs/libnsl-0-r1 [0]
[ebuild r U ] sys-libs/readline-7.0_p3 [6.3_p8-r3]
[ebuild U ] net-misc/rsync-3.1.3 [3.1.2-r2]
[ebuild rR ] sys-process/procps-3.3.12
[ebuild U ] app-shells/bash-4.4_p12 [4.3_p48-r1]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4 [7.100.200_rc-r3]
[ebuild U ] app-eselect/eselect-python-20171204 [20160516]
[ebuild U ] virtual/perl-File-Spec-3.630.100_rc-r4 [3.630.100_rc-r3]
[ebuild U ] virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r4 [1.441.700.100_rc-r3]
[ebuild U ] sys-apps/hwids-20171003 [20170328]
[ebuild U ] net-misc/netifrc-0.5.1 [0.2.2]
[ebuild U ] virtual/perl-JSON-PP-2.273.0.100_rc-r6 [2.273.0.100_rc-r5]
[ebuild U ] app-arch/xz-utils-5.2.3 [5.2.2]
[ebuild rR ] sys-apps/coreutils-8.26
[ebuild rR ] sys-apps/net-tools-1.60_p20161110235919
[ebuild rR ] app-portage/elt-patches-20170815
[ebuild rR ] sys-devel/m4-1.4.17
[ebuild U ] app-misc/pax-utils-1.2.3 [1.1.7]
[ebuild rR ] app-portage/portage-utils-0.62
[ebuild rR ] dev-libs/libltdl-2.4.6
[ebuild U ] dev-libs/libpcre-8.41-r1 [8.40-r1]
[ebuild rR ] dev-libs/gmp-6.1.2
[ebuild U ] app-admin/eselect-1.4.11 [1.4.8]
[ebuild U ] sys-apps/kmod-24 [23]
[ebuild U ] sys-apps/sandbox-2.13 [2.10-r4]
[ebuild rR ] sys-apps/less-529
[ebuild rR ] sys-auth/pambase-20150213-r1
[ebuild rR ] sys-kernel/linux-headers-4.13
[ebuild rR ] sys-apps/util-linux-2.30.2-r1
[ebuild rR ] sys-apps/s390-tools-1.36.1-r1
[ebuild rR ] sys-devel/binutils-2.29.1-r1
[ebuild rR ] sys-process/psmisc-22.21-r3
[ebuild rR ] sys-apps/openrc-0.34.11
[ebuild U ] dev-lang/perl-5.24.3-r1 [5.24.3]
[ebuild U ] sys-devel/automake-1.15.1-r2 [1.15.1-r1]
[ebuild rR ] dev-util/gtk-doc-am-1.25-r1
[ebuild rR ] sys-devel/libtool-2.4.6-r3
[ebuild rR ] dev-libs/libxml2-2.9.7
[ebuild rR ] sys-libs/gdbm-1.13-r2
[ebuild rR ] sys-devel/gettext-0.19.8.1
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild U ] dev-libs/libxslt-1.1.32 [1.1.30-r2]
[ebuild U ] app-misc/ca-certificates-20170717.3.36.1 [20161130.3.30.2]
[ebuild r U ] sys-apps/gawk-4.1.4 [4.1.3]
[ebuild rR ] sys-apps/diffutils-3.3
[ebuild r U ] net-misc/wget-1.19.5 [1.19.1-r2]
[ebuild rR ] sys-apps/grep-3.0
[ebuild U ] sys-devel/flex-2.6.4-r1 [2.6.1]
[ebuild rR ] dev-libs/glib-2.50.3-r1
[ebuild rR ] app-text/po4a-0.47-r1
[ebuild rR ] dev-python/appdirs-1.4.3
[ebuild rR ] dev-python/pyparsing-2.2.0
[ebuild N ] dev-util/ninja-1.8.2
[ebuild rR ] app-editors/nano-2.8.7
[ebuild rR ] sys-apps/texinfo-6.3
[ebuild r U ] sys-apps/shadow-4.6 [4.4-r2]
[ebuild rR ] sys-libs/pam-1.2.1-r2
[ebuild rR ] dev-libs/elfutils-0.170-r1
[ebuild rR ] sys-devel/bison-3.0.4-r1
[ebuild rR ] sys-apps/man-db-2.7.6.1-r2
[ebuild rR ] sys-devel/gcc-5.4.0-r4
[ebuild rR ] sys-apps/iproute2-4.14.1-r2
[ebuild rR ] dev-python/packaging-16.8
[ebuild R ] sys-apps/portage-2.3.8
[ebuild rR ] dev-python/setuptools-34.0.2-r1
[ebuild U ] dev-python/six-1.11.0 [1.10.0]
[ebuild rR ] dev-python/pyxattr-0.5.5
[ebuild rR ] dev-python/certifi-2017.4.17
[ebuild N ] dev-util/meson-0.46.1
[ebuild r U ] sys-fs/udev-236-r1 [233]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-fs/udev-236-r1::gentoo
# required by @__auto_rebuild__ (argument)
=dev-util/meson-0.46.1 ~s390
# required by @__auto_rebuild__ (argument)
=sys-apps/shadow-4.6 ~s390
# required by @__auto_rebuild__ (argument)
=sys-libs/glibc-2.25-r11 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
* In order to avoid wasting time, backtracking has terminated early
* due to the above autounmask change(s). The --autounmask-backtrack=y
* option can be used to force further backtracking, but there is no
* guarantee that it will produce a solution.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180521T071234Z/.catalyst_lock'
Command exited with non-zero status 1
47.03user 10.57system 1:06.74elapsed 86%CPU (0avgtext+0avgdata 178688maxresident)k
0inputs+0outputs (437major+2478993minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180521T071234Z.8hGsC7/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-05-22 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-05-22 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180522T071228Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180522T071228Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180522T071228Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180522T071228Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180522T071228Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180522T071228Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180522T071228Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180522T071228Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180522T071228Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180522T071228Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180522T071228Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180522T071228Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180522T071228Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180522T071228Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180522T071228Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
The following packages are causing rebuilds:
(sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) causes rebuilds for:
(app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, ebuild scheduled for merge)
(sys-apps/gawk-4.1.4:0/0::gentoo, ebuild scheduled for merge)
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge)
(sys-apps/util-linux-2.30.2-r1:0/0::gentoo, ebuild scheduled for merge)
(dev-libs/libpcre-8.41-r1:3/3::gentoo, ebuild scheduled for merge)
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
(dev-libs/libxml2-2.9.7:2/2::gentoo, ebuild scheduled for merge)
[ebuild r U ] sys-libs/glibc-2.25-r11 [2.25-r9]
[ebuild U ] sys-libs/ncurses-6.1-r2 [6.0-r1]
[ebuild U ] sys-apps/debianutils-4.8.3 [4.7]
[ebuild U ] dev-lang/python-exec-2.4.5 [2.4.4]
[ebuild U ] sys-devel/autoconf-wrapper-13-r1 [13]
[ebuild U ] net-libs/libnsl-0-r1 [0]
[ebuild N ] dev-util/re2c-0.13.5-r1
[ebuild r U ] sys-libs/readline-7.0_p3 [6.3_p8-r3]
[ebuild U ] net-misc/rsync-3.1.3 [3.1.2-r2]
[ebuild rR ] sys-process/procps-3.3.12
[ebuild U ] app-shells/bash-4.4_p12 [4.3_p48-r1]
[ebuild U ] app-text/build-docbook-catalog-1.21 [1.19.1]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4 [7.100.200_rc-r3]
[ebuild U ] app-eselect/eselect-python-20171204 [20160516]
[ebuild U ] sys-apps/hwids-20171003 [20170328]
[ebuild U ] virtual/perl-File-Spec-3.630.100_rc-r4 [3.630.100_rc-r3]
[ebuild U ] virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r4 [1.441.700.100_rc-r3]
[ebuild U ] net-misc/netifrc-0.5.1 [0.2.2]
[ebuild U ] virtual/perl-JSON-PP-2.273.0.100_rc-r6 [2.273.0.100_rc-r5]
[ebuild U ] app-arch/xz-utils-5.2.3 [5.2.2]
[ebuild rR ] sys-apps/coreutils-8.26
[ebuild rR ] sys-apps/net-tools-1.60_p20161110235919
[ebuild rR ] app-portage/elt-patches-20170815
[ebuild rR ] sys-devel/m4-1.4.17
[ebuild U ] app-misc/pax-utils-1.2.3 [1.1.7]
[ebuild rR ] app-portage/portage-utils-0.62
[ebuild rR ] dev-libs/libltdl-2.4.6
[ebuild U ] dev-libs/libpcre-8.41-r1 [8.40-r1]
[ebuild rR ] dev-libs/gmp-6.1.2
[ebuild U ] app-admin/eselect-1.4.11 [1.4.8]
[ebuild U ] sys-apps/kmod-24 [23]
[ebuild U ] sys-apps/sandbox-2.13 [2.10-r4]
[ebuild rR ] sys-apps/less-529
[ebuild rR ] sys-auth/pambase-20150213-r1
[ebuild rR ] sys-kernel/linux-headers-4.13
[ebuild rR ] sys-apps/util-linux-2.30.2-r1
[ebuild rR ] sys-apps/s390-tools-1.36.1-r1
[ebuild rR ] sys-devel/binutils-2.29.1-r1
[ebuild rR ] sys-process/psmisc-22.21-r3
[ebuild rR ] sys-apps/openrc-0.34.11
[ebuild U ] dev-lang/perl-5.24.3-r1 [5.24.3]
[ebuild U ] sys-devel/automake-1.15.1-r2 [1.15.1-r1]
[ebuild rR ] dev-util/gtk-doc-am-1.25-r1
[ebuild rR ] sys-devel/libtool-2.4.6-r3
[ebuild rR ] dev-libs/libxml2-2.9.7
[ebuild rR ] sys-libs/gdbm-1.13-r2
[ebuild rR ] sys-devel/gettext-0.19.8.1
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild U ] dev-libs/libxslt-1.1.32 [1.1.30-r2]
[ebuild rR ] app-text/docbook-xml-dtd-4.5-r1
[ebuild U ] app-misc/ca-certificates-20170717.3.36.1 [20161130.3.30.2]
[ebuild rR ] sys-apps/diffutils-3.3
[ebuild rR ] sys-apps/grep-3.0
[ebuild r U ] net-misc/wget-1.19.5 [1.19.1-r2]
[ebuild r U ] sys-apps/gawk-4.1.4 [4.1.3]
[ebuild U ] sys-devel/flex-2.6.4-r1 [2.6.1]
[ebuild rR ] dev-libs/glib-2.50.3-r1
[ebuild rR ] app-text/po4a-0.47-r1
[ebuild rR ] dev-python/pyparsing-2.2.0
[ebuild rR ] dev-python/appdirs-1.4.3
[ebuild N ] dev-util/ninja-1.8.2
[ebuild r U ] sys-apps/shadow-4.6 [4.4-r2]
[ebuild rR ] sys-apps/texinfo-6.3
[ebuild rR ] app-editors/nano-2.8.7
[ebuild rR ] sys-libs/pam-1.2.1-r2
[ebuild rR ] dev-libs/elfutils-0.170-r1
[ebuild rR ] sys-devel/bison-3.0.4-r1
[ebuild rR ] sys-apps/man-db-2.7.6.1-r2
[ebuild rR ] sys-devel/gcc-5.4.0-r4
[ebuild rR ] sys-apps/iproute2-4.14.1-r2
[ebuild rR ] dev-python/packaging-16.8
[ebuild R ] sys-apps/portage-2.3.8
[ebuild rR ] dev-python/setuptools-34.0.2-r1
[ebuild U ] dev-python/six-1.11.0 [1.10.0]
[ebuild rR ] dev-python/pyxattr-0.5.5
[ebuild rR ] dev-python/certifi-2017.4.17
[ebuild N ] dev-util/meson-0.45.1
[ebuild r U ] sys-fs/udev-236-r1 [233]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by @__auto_rebuild__ (argument)
=sys-libs/glibc-2.25-r11 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
* In order to avoid wasting time, backtracking has terminated early
* due to the above autounmask change(s). The --autounmask-backtrack=y
* option can be used to force further backtracking, but there is no
* guarantee that it will produce a solution.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180522T071228Z/.catalyst_lock'
Command exited with non-zero status 1
46.61user 10.24system 1:02.91elapsed 90%CPU (0avgtext+0avgdata 177600maxresident)k
0inputs+0outputs (429major+2477841minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180522T071228Z.5vOSqt/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-05-25 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-05-25 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180525T071240Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180525T071240Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180525T071240Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180525T071240Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180525T071240Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180525T071240Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180525T071240Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180525T071240Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180525T071240Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180525T071240Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180525T071240Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180525T071240Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180525T071240Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180525T071240Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180525T071240Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
The following packages are causing rebuilds:
(sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) causes rebuilds for:
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
(dev-libs/libpcre-8.41-r1:3/3::gentoo, ebuild scheduled for merge)
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, ebuild scheduled for merge)
(app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
(sys-apps/gawk-4.1.4:0/0::gentoo, ebuild scheduled for merge)
(dev-libs/libxml2-2.9.7:2/2::gentoo, ebuild scheduled for merge)
(sys-apps/util-linux-2.30.2-r1:0/0::gentoo, ebuild scheduled for merge)
[ebuild U ] sys-libs/glibc-2.25-r11 [2.25-r9]
[ebuild U ] sys-libs/ncurses-6.1-r2 [6.0-r1]
[ebuild U ] sys-apps/debianutils-4.8.3 [4.7]
[ebuild U ] dev-lang/python-exec-2.4.5 [2.4.4]
[ebuild U ] sys-devel/autoconf-wrapper-13-r1 [13]
[ebuild N ] dev-util/re2c-0.13.5-r1
[ebuild U ] net-libs/libnsl-0-r1 [0]
[ebuild r U ] sys-libs/readline-7.0_p3 [6.3_p8-r3]
[ebuild U ] net-misc/rsync-3.1.3 [3.1.2-r2]
[ebuild rR ] sys-process/procps-3.3.12
[ebuild U ] app-shells/bash-4.4_p12 [4.3_p48-r1]
[ebuild U ] app-text/build-docbook-catalog-1.21 [1.19.1]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4 [7.100.200_rc-r3]
[ebuild U ] app-eselect/eselect-python-20171204 [20160516]
[ebuild U ] virtual/perl-File-Spec-3.630.100_rc-r4 [3.630.100_rc-r3]
[ebuild U ] virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r4 [1.441.700.100_rc-r3]
[ebuild U ] sys-apps/hwids-20171003 [20170328]
[ebuild U ] net-misc/netifrc-0.5.1 [0.2.2]
[ebuild U ] virtual/perl-JSON-PP-2.273.0.100_rc-r6 [2.273.0.100_rc-r5]
[ebuild U ] app-arch/xz-utils-5.2.3 [5.2.2]
[ebuild r U ] sys-apps/coreutils-8.29 [8.26]
[ebuild rR ] sys-apps/net-tools-1.60_p20161110235919
[ebuild rR ] app-portage/elt-patches-20170815
[ebuild rR ] sys-devel/m4-1.4.17
[ebuild U ] app-misc/pax-utils-1.2.3 [1.1.7]
[ebuild rR ] app-portage/portage-utils-0.62
[ebuild rR ] dev-libs/libltdl-2.4.6
[ebuild U ] dev-libs/libpcre-8.41-r1 [8.40-r1]
[ebuild rR ] dev-libs/gmp-6.1.2
[ebuild U ] app-admin/eselect-1.4.11 [1.4.8]
[ebuild U ] sys-apps/kmod-24 [23]
[ebuild U ] sys-apps/sandbox-2.13 [2.10-r4]
[ebuild rR ] sys-apps/less-529
[ebuild rR ] sys-auth/pambase-20150213-r1
[ebuild rR ] sys-kernel/linux-headers-4.13
[ebuild rR ] sys-apps/util-linux-2.30.2-r1
[ebuild rR ] sys-apps/s390-tools-1.36.1-r1
[ebuild rR ] sys-devel/binutils-2.29.1-r1
[ebuild rR ] sys-process/psmisc-22.21-r3
[ebuild rR ] sys-apps/openrc-0.34.11
[ebuild U ] dev-lang/perl-5.24.3-r1 [5.24.3]
[ebuild U ] sys-devel/automake-1.15.1-r2 [1.15.1-r1]
[ebuild rR ] dev-util/gtk-doc-am-1.25-r1
[ebuild rR ] sys-devel/libtool-2.4.6-r3
[ebuild rR ] dev-libs/libxml2-2.9.7
[ebuild rR ] sys-libs/gdbm-1.13-r2
[ebuild rR ] sys-devel/gettext-0.19.8.1
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild U ] dev-libs/libxslt-1.1.32 [1.1.30-r2]
[ebuild rR ] app-text/docbook-xml-dtd-4.5-r1
[ebuild U ] app-misc/ca-certificates-20170717.3.36.1 [20161130.3.30.2]
[ebuild r U ] net-misc/wget-1.19.5 [1.19.1-r2]
[ebuild rR ] sys-apps/diffutils-3.3
[ebuild rR ] sys-apps/grep-3.0
[ebuild r U ] sys-apps/gawk-4.1.4 [4.1.3]
[ebuild U ] sys-devel/flex-2.6.4-r1 [2.6.1]
[ebuild rR ] dev-python/pyparsing-2.2.0
[ebuild rR ] app-text/po4a-0.47-r1
[ebuild rR ] dev-python/appdirs-1.4.3
[ebuild N ] dev-util/ninja-1.8.2
[ebuild rR ] sys-apps/texinfo-6.3
[ebuild rR ] app-editors/nano-2.8.7
[ebuild r U ] sys-apps/shadow-4.6 [4.4-r2]
[ebuild rR ] sys-libs/pam-1.2.1-r2
[ebuild rR ] dev-libs/elfutils-0.170-r1
[ebuild rR ] sys-devel/bison-3.0.4-r1
[ebuild rR ] sys-apps/man-db-2.7.6.1-r2
[ebuild rR ] sys-devel/gcc-5.4.0-r4
[ebuild rR ] sys-apps/iproute2-4.14.1-r2
[ebuild rR ] dev-libs/glib-2.50.3-r1
[ebuild U ] x11-misc/shared-mime-info-1.9 [1.4]
[ebuild rR ] dev-python/packaging-16.8
[ebuild R ] sys-apps/portage-2.3.8
[ebuild rR ] dev-python/setuptools-34.0.2-r1
[ebuild U ] dev-python/six-1.11.0 [1.10.0]
[ebuild rR ] dev-python/pyxattr-0.5.5
[ebuild rR ] dev-python/certifi-2017.4.17
[ebuild N ] dev-util/meson-0.45.1
[ebuild r U ] sys-fs/udev-238 [233]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by @__auto_rebuild__ (argument)
=sys-apps/coreutils-8.29 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180525T071240Z/.catalyst_lock'
Command exited with non-zero status 1
46.61user 9.51system 1:00.24elapsed 93%CPU (0avgtext+0avgdata 178208maxresident)k
0inputs+0outputs (412major+2476669minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180525T071240Z.xYUmLS/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-05-26 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-05-26 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180526T071236Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180526T071236Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180526T071236Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180526T071236Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180526T071236Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180526T071236Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180526T071236Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180526T071236Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180526T071236Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180526T071236Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180526T071236Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180526T071236Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180526T071236Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180526T071236Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180526T071236Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
The following packages are causing rebuilds:
(sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) causes rebuilds for:
(app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
(dev-libs/libxml2-2.9.7:2/2::gentoo, ebuild scheduled for merge)
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge)
(dev-libs/libpcre-8.41-r1:3/3::gentoo, ebuild scheduled for merge)
(sys-apps/gawk-4.1.4:0/0::gentoo, ebuild scheduled for merge)
(sys-apps/util-linux-2.30.2-r1:0/0::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, ebuild scheduled for merge)
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
[ebuild U ] sys-libs/glibc-2.25-r11 [2.25-r9]
[ebuild U ] sys-libs/ncurses-6.1-r2 [6.0-r1]
[ebuild U ] sys-apps/debianutils-4.8.3 [4.7]
[ebuild U ] dev-lang/python-exec-2.4.5 [2.4.4]
[ebuild U ] sys-devel/autoconf-wrapper-13-r1 [13]
[ebuild U ] net-libs/libnsl-0-r1 [0]
[ebuild N ] dev-util/re2c-0.13.5-r1
[ebuild r U ] sys-libs/readline-7.0_p3 [6.3_p8-r3]
[ebuild U ] net-misc/rsync-3.1.3 [3.1.2-r2]
[ebuild rR ] sys-process/procps-3.3.12
[ebuild U ] app-shells/bash-4.4_p12 [4.3_p48-r1]
[ebuild U ] app-text/build-docbook-catalog-1.21 [1.19.1]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4 [7.100.200_rc-r3]
[ebuild U ] app-eselect/eselect-python-20171204 [20160516]
[ebuild U ] sys-apps/hwids-20171003 [20170328]
[ebuild U ] virtual/perl-File-Spec-3.630.100_rc-r4 [3.630.100_rc-r3]
[ebuild U ] virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r4 [1.441.700.100_rc-r3]
[ebuild U ] net-misc/netifrc-0.5.1 [0.2.2]
[ebuild U ] virtual/perl-JSON-PP-2.273.0.100_rc-r6 [2.273.0.100_rc-r5]
[ebuild U ] app-arch/xz-utils-5.2.3 [5.2.2]
[ebuild r U ] sys-apps/coreutils-8.29 [8.26]
[ebuild rR ] sys-apps/net-tools-1.60_p20161110235919
[ebuild rR ] app-portage/elt-patches-20170815
[ebuild rR ] sys-devel/m4-1.4.17
[ebuild U ] app-misc/pax-utils-1.2.3 [1.1.7]
[ebuild rR ] app-portage/portage-utils-0.62
[ebuild rR ] dev-libs/libltdl-2.4.6
[ebuild U ] dev-libs/libpcre-8.41-r1 [8.40-r1]
[ebuild rR ] dev-libs/gmp-6.1.2
[ebuild U ] app-admin/eselect-1.4.11 [1.4.8]
[ebuild U ] sys-apps/kmod-24 [23]
[ebuild U ] sys-apps/sandbox-2.13 [2.10-r4]
[ebuild rR ] sys-apps/less-529
[ebuild rR ] sys-auth/pambase-20150213-r1
[ebuild rR ] sys-kernel/linux-headers-4.13
[ebuild rR ] sys-apps/util-linux-2.30.2-r1
[ebuild rR ] sys-apps/s390-tools-1.36.1-r1
[ebuild rR ] sys-devel/binutils-2.29.1-r1
[ebuild rR ] sys-process/psmisc-22.21-r3
[ebuild rR ] sys-apps/openrc-0.34.11
[ebuild U ] dev-lang/perl-5.24.3-r1 [5.24.3]
[ebuild U ] sys-devel/automake-1.15.1-r2 [1.15.1-r1]
[ebuild rR ] dev-util/gtk-doc-am-1.25-r1
[ebuild rR ] sys-devel/libtool-2.4.6-r3
[ebuild rR ] dev-libs/libxml2-2.9.7
[ebuild rR ] sys-libs/gdbm-1.13-r2
[ebuild rR ] sys-devel/gettext-0.19.8.1
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild U ] dev-libs/libxslt-1.1.32 [1.1.30-r2]
[ebuild rR ] app-text/docbook-xml-dtd-4.5-r1
[ebuild U ] app-misc/ca-certificates-20170717.3.36.1 [20161130.3.30.2]
[ebuild rR ] sys-apps/grep-3.0
[ebuild r U ] net-misc/wget-1.19.5 [1.19.1-r2]
[ebuild rR ] sys-apps/diffutils-3.3
[ebuild r U ] sys-apps/gawk-4.1.4 [4.1.3]
[ebuild U ] sys-devel/flex-2.6.4-r1 [2.6.1]
[ebuild rR ] dev-python/appdirs-1.4.3
[ebuild rR ] dev-python/pyparsing-2.2.0
[ebuild rR ] app-text/po4a-0.47-r1
[ebuild N ] dev-util/ninja-1.8.2
[ebuild r U ] sys-apps/shadow-4.6 [4.4-r2]
[ebuild rR ] sys-apps/texinfo-6.3
[ebuild rR ] app-editors/nano-2.8.7
[ebuild rR ] sys-libs/pam-1.2.1-r2
[ebuild rR ] dev-libs/elfutils-0.170-r1
[ebuild rR ] sys-devel/bison-3.0.4-r1
[ebuild rR ] sys-apps/man-db-2.7.6.1-r2
[ebuild rR ] sys-devel/gcc-5.4.0-r4
[ebuild rR ] sys-apps/iproute2-4.14.1-r2
[ebuild rR ] dev-libs/glib-2.50.3-r1
[ebuild U ] x11-misc/shared-mime-info-1.9 [1.4]
[ebuild rR ] dev-python/packaging-16.8
[ebuild R ] sys-apps/portage-2.3.8
[ebuild rR ] dev-python/setuptools-34.0.2-r1
[ebuild U ] dev-python/six-1.11.0 [1.10.0]
[ebuild rR ] dev-python/certifi-2017.4.17
[ebuild rR ] dev-python/pyxattr-0.5.5
[ebuild N ] dev-util/meson-0.45.1
[ebuild r U ] sys-fs/udev-238 [233]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by @__auto_rebuild__ (argument)
=sys-apps/coreutils-8.29 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180526T071236Z/.catalyst_lock'
Command exited with non-zero status 1
46.28user 9.89system 1:01.26elapsed 91%CPU (0avgtext+0avgdata 178016maxresident)k
0inputs+0outputs (421major+2479102minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180526T071236Z.rHdQLJ/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-05-27 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-05-27 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180527T071152Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180527T071152Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180527T071152Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180527T071152Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180527T071152Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180527T071152Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180527T071152Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180527T071152Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180527T071152Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180527T071152Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180527T071152Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180527T071152Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180527T071152Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180527T071152Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180527T071152Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
The following packages are causing rebuilds:
(sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) causes rebuilds for:
(sys-apps/gawk-4.1.4:0/0::gentoo, ebuild scheduled for merge)
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, ebuild scheduled for merge)
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge)
(dev-libs/libpcre-8.41-r1:3/3::gentoo, ebuild scheduled for merge)
(sys-apps/util-linux-2.30.2-r1:0/0::gentoo, ebuild scheduled for merge)
(app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
(dev-libs/libxml2-2.9.7:2/2::gentoo, ebuild scheduled for merge)
[ebuild U ] sys-libs/glibc-2.25-r11 [2.25-r9]
[ebuild U ] sys-libs/ncurses-6.1-r2 [6.0-r1]
[ebuild U ] sys-apps/debianutils-4.8.3 [4.7]
[ebuild U ] dev-lang/python-exec-2.4.5 [2.4.4]
[ebuild U ] sys-devel/autoconf-wrapper-13-r1 [13]
[ebuild N ] dev-util/re2c-0.13.5-r1
[ebuild U ] net-libs/libnsl-0-r1 [0]
[ebuild r U ] sys-libs/readline-7.0_p3 [6.3_p8-r3]
[ebuild U ] net-misc/rsync-3.1.3 [3.1.2-r2]
[ebuild rR ] sys-process/procps-3.3.12
[ebuild U ] app-shells/bash-4.4_p12 [4.3_p48-r1]
[ebuild U ] app-text/build-docbook-catalog-1.21 [1.19.1]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4 [7.100.200_rc-r3]
[ebuild U ] app-eselect/eselect-python-20171204 [20160516]
[ebuild U ] virtual/perl-File-Spec-3.630.100_rc-r4 [3.630.100_rc-r3]
[ebuild U ] virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r4 [1.441.700.100_rc-r3]
[ebuild U ] sys-apps/hwids-20171003 [20170328]
[ebuild U ] net-misc/netifrc-0.5.1 [0.2.2]
[ebuild U ] virtual/perl-JSON-PP-2.273.0.100_rc-r6 [2.273.0.100_rc-r5]
[ebuild U ] app-arch/xz-utils-5.2.3 [5.2.2]
[ebuild r U ] sys-apps/coreutils-8.29 [8.26]
[ebuild rR ] sys-apps/net-tools-1.60_p20161110235919
[ebuild rR ] app-portage/elt-patches-20170815
[ebuild rR ] sys-devel/m4-1.4.17
[ebuild U ] app-misc/pax-utils-1.2.3 [1.1.7]
[ebuild rR ] app-portage/portage-utils-0.62
[ebuild rR ] dev-libs/libltdl-2.4.6
[ebuild U ] dev-libs/libpcre-8.41-r1 [8.40-r1]
[ebuild rR ] dev-libs/gmp-6.1.2
[ebuild U ] app-admin/eselect-1.4.11 [1.4.8]
[ebuild U ] sys-apps/kmod-24 [23]
[ebuild U ] sys-apps/sandbox-2.13 [2.10-r4]
[ebuild rR ] sys-apps/less-529
[ebuild rR ] sys-auth/pambase-20150213-r1
[ebuild rR ] sys-kernel/linux-headers-4.13
[ebuild rR ] sys-apps/util-linux-2.30.2-r1
[ebuild rR ] sys-apps/s390-tools-1.36.1-r1
[ebuild rR ] sys-devel/binutils-2.29.1-r1
[ebuild U ] app-misc/ca-certificates-20170717.3.36.1 [20161130.3.30.2]
[ebuild rR ] sys-process/psmisc-22.21-r3
[ebuild rR ] sys-apps/openrc-0.34.11
[ebuild U ] dev-lang/perl-5.24.3-r1 [5.24.3]
[ebuild U ] sys-devel/automake-1.15.1-r2 [1.15.1-r1]
[ebuild rR ] dev-util/gtk-doc-am-1.25-r1
[ebuild rR ] sys-devel/libtool-2.4.6-r3
[ebuild rR ] dev-libs/libxml2-2.9.7
[ebuild rR ] sys-libs/gdbm-1.13-r2
[ebuild rR ] sys-devel/gettext-0.19.8.1
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild U ] dev-libs/libxslt-1.1.32 [1.1.30-r2]
[ebuild rR ] app-text/docbook-xml-dtd-4.5-r1
[ebuild r U ] sys-apps/gawk-4.1.4 [4.1.3]
[ebuild rR ] sys-apps/grep-3.0
[ebuild r U ] net-misc/wget-1.19.5 [1.19.1-r2]
[ebuild rR ] sys-apps/diffutils-3.3
[ebuild U ] sys-devel/flex-2.6.4-r1 [2.6.1]
[ebuild rR ] dev-python/appdirs-1.4.3
[ebuild rR ] dev-python/pyparsing-2.2.0
[ebuild rR ] app-text/po4a-0.47-r1
[ebuild N ] dev-util/ninja-1.8.2
[ebuild rR ] sys-apps/texinfo-6.3
[ebuild r U ] sys-apps/shadow-4.6 [4.4-r2]
[ebuild rR ] app-editors/nano-2.8.7
[ebuild rR ] sys-libs/pam-1.2.1-r2
[ebuild rR ] dev-libs/elfutils-0.170-r1
[ebuild rR ] sys-devel/bison-3.0.4-r1
[ebuild rR ] sys-apps/man-db-2.7.6.1-r2
[ebuild rR ] sys-devel/gcc-5.4.0-r4
[ebuild rR ] sys-apps/iproute2-4.14.1-r2
[ebuild rR ] dev-libs/glib-2.50.3-r1
[ebuild U ] x11-misc/shared-mime-info-1.9 [1.4]
[ebuild rR ] dev-python/packaging-16.8
[ebuild R ] sys-apps/portage-2.3.8
[ebuild rR ] dev-python/setuptools-34.0.2-r1
[ebuild U ] dev-python/six-1.11.0 [1.10.0]
[ebuild rR ] dev-python/pyxattr-0.5.5
[ebuild U ] dev-python/certifi-2018.4.16 [2017.4.17]
[ebuild N ] dev-util/meson-0.45.1
[ebuild r U ] sys-fs/udev-238 [233]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by @__auto_rebuild__ (argument)
=sys-apps/coreutils-8.29 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180527T071152Z/.catalyst_lock'
Command exited with non-zero status 1
46.08user 9.99system 1:02.05elapsed 90%CPU (0avgtext+0avgdata 176960maxresident)k
0inputs+0outputs (416major+2467786minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180527T071152Z.lOfq2I/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-05-28 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-05-28 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180528T071230Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180528T071230Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180528T071230Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180528T071230Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180528T071230Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180528T071230Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180528T071230Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180528T071230Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180528T071230Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180528T071230Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180528T071230Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180528T071230Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180528T071230Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180528T071230Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180528T071230Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
The following packages are causing rebuilds:
(sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) causes rebuilds for:
(dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, ebuild scheduled for merge)
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge)
(sys-apps/gawk-4.1.4:0/0::gentoo, ebuild scheduled for merge)
(dev-libs/libxml2-2.9.7:2/2::gentoo, ebuild scheduled for merge)
(dev-libs/libpcre-8.41-r1:3/3::gentoo, ebuild scheduled for merge)
(app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
(sys-apps/util-linux-2.30.2-r1:0/0::gentoo, ebuild scheduled for merge)
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
[ebuild U ] sys-libs/glibc-2.25-r11 [2.25-r9]
[ebuild U ] sys-libs/ncurses-6.1-r2 [6.0-r1]
[ebuild U ] sys-apps/debianutils-4.8.3 [4.7]
[ebuild U ] dev-lang/python-exec-2.4.5 [2.4.4]
[ebuild U ] sys-devel/autoconf-wrapper-13-r1 [13]
[ebuild U ] net-libs/libnsl-0-r1 [0]
[ebuild N ] dev-util/re2c-0.13.5-r1
[ebuild U ] sys-devel/patch-2.7.6-r1 [2.7.5]
[ebuild r U ] sys-libs/readline-7.0_p3 [6.3_p8-r3]
[ebuild U ] net-misc/rsync-3.1.3 [3.1.2-r2]
[ebuild rR ] sys-process/procps-3.3.12
[ebuild U ] app-shells/bash-4.4_p12 [4.3_p48-r1]
[ebuild U ] app-text/build-docbook-catalog-1.21 [1.19.1]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4 [7.100.200_rc-r3]
[ebuild U ] app-eselect/eselect-python-20171204 [20160516]
[ebuild U ] virtual/perl-File-Spec-3.630.100_rc-r4 [3.630.100_rc-r3]
[ebuild U ] sys-apps/hwids-20171003 [20170328]
[ebuild U ] virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r4 [1.441.700.100_rc-r3]
[ebuild U ] net-misc/netifrc-0.5.1 [0.2.2]
[ebuild U ] virtual/perl-JSON-PP-2.273.0.100_rc-r6 [2.273.0.100_rc-r5]
[ebuild U ] app-arch/xz-utils-5.2.3 [5.2.2]
[ebuild r U ] sys-apps/coreutils-8.29 [8.26]
[ebuild rR ] sys-apps/net-tools-1.60_p20161110235919
[ebuild rR ] app-portage/elt-patches-20170815
[ebuild rR ] sys-devel/m4-1.4.17
[ebuild U ] app-misc/pax-utils-1.2.3 [1.1.7]
[ebuild rR ] app-portage/portage-utils-0.62
[ebuild rR ] dev-libs/libltdl-2.4.6
[ebuild U ] dev-libs/libpcre-8.41-r1 [8.40-r1]
[ebuild rR ] dev-libs/gmp-6.1.2
[ebuild U ] app-admin/eselect-1.4.12 [1.4.8]
[ebuild U ] sys-apps/kmod-24 [23]
[ebuild U ] sys-apps/sandbox-2.13 [2.10-r4]
[ebuild rR ] sys-apps/less-529
[ebuild rR ] sys-auth/pambase-20150213-r1
[ebuild rR ] sys-kernel/linux-headers-4.13
[ebuild rR ] sys-apps/util-linux-2.30.2-r1
[ebuild rR ] sys-apps/s390-tools-1.36.1-r1
[ebuild rR ] sys-devel/binutils-2.29.1-r1
[ebuild U ] app-misc/ca-certificates-20170717.3.36.1 [20161130.3.30.2]
[ebuild rR ] sys-process/psmisc-22.21-r3
[ebuild rR ] sys-apps/openrc-0.34.11
[ebuild U ] dev-lang/perl-5.24.3-r1 [5.24.3]
[ebuild U ] sys-devel/automake-1.15.1-r2 [1.15.1-r1]
[ebuild rR ] dev-util/gtk-doc-am-1.25-r1
[ebuild rR ] sys-devel/libtool-2.4.6-r3
[ebuild rR ] dev-libs/libxml2-2.9.7
[ebuild rR ] sys-libs/gdbm-1.13-r2
[ebuild rR ] sys-devel/gettext-0.19.8.1
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild U ] dev-libs/libxslt-1.1.32 [1.1.30-r2]
[ebuild rR ] app-text/docbook-xml-dtd-4.5-r1
[ebuild rR ] sys-apps/diffutils-3.3
[ebuild r U ] net-misc/wget-1.19.5 [1.19.1-r2]
[ebuild rR ] sys-apps/grep-3.0
[ebuild r U ] sys-apps/gawk-4.1.4 [4.1.3]
[ebuild U ] sys-devel/flex-2.6.4-r1 [2.6.1]
[ebuild rR ] dev-python/appdirs-1.4.3
[ebuild rR ] dev-python/pyparsing-2.2.0
[ebuild rR ] app-text/po4a-0.47-r1
[ebuild N ] dev-util/ninja-1.8.2
[ebuild r U ] sys-apps/shadow-4.6 [4.4-r2]
[ebuild rR ] sys-apps/texinfo-6.3
[ebuild rR ] app-editors/nano-2.8.7
[ebuild rR ] sys-libs/pam-1.2.1-r2
[ebuild rR ] dev-libs/elfutils-0.170-r1
[ebuild rR ] sys-devel/bison-3.0.4-r1
[ebuild rR ] sys-apps/man-db-2.7.6.1-r2
[ebuild rR ] sys-devel/gcc-5.4.0-r4
[ebuild rR ] sys-apps/iproute2-4.14.1-r2
[ebuild rR ] dev-libs/glib-2.50.3-r1
[ebuild U ] x11-misc/shared-mime-info-1.9 [1.4]
[ebuild rR ] dev-python/packaging-16.8
[ebuild R ] sys-apps/portage-2.3.8
[ebuild rR ] dev-python/setuptools-34.0.2-r1
[ebuild U ] dev-python/six-1.11.0 [1.10.0]
[ebuild rR ] dev-python/pyxattr-0.5.5
[ebuild N ] dev-util/meson-0.45.1
[ebuild U ] dev-python/certifi-2018.4.16 [2017.4.17]
[ebuild r U ] sys-fs/udev-238 [233]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by @__auto_rebuild__ (argument)
=sys-apps/coreutils-8.29 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180528T071230Z/.catalyst_lock'
Command exited with non-zero status 1
46.27user 10.17system 1:00.23elapsed 93%CPU (0avgtext+0avgdata 175872maxresident)k
0inputs+0outputs (441major+2478490minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180528T071230Z.cZL66y/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-05-29 7:16 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-05-29 7:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180529T071245Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180529T071245Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180529T071245Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180529T071245Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180529T071245Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180529T071245Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180529T071245Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180529T071245Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180529T071245Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180529T071245Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180529T071245Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180529T071245Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180529T071245Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180529T071245Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180529T071245Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
The following packages are causing rebuilds:
(sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) causes rebuilds for:
(dev-libs/libxml2-2.9.7:2/2::gentoo, ebuild scheduled for merge)
(sys-apps/util-linux-2.30.2-r1:0/0::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, ebuild scheduled for merge)
(sys-apps/gawk-4.1.4:0/0::gentoo, ebuild scheduled for merge)
(app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge)
(dev-libs/libpcre-8.41-r1:3/3::gentoo, ebuild scheduled for merge)
[ebuild U ] sys-libs/glibc-2.25-r11 [2.25-r9]
[ebuild U ] sys-libs/ncurses-6.1-r2 [6.0-r1]
[ebuild U ] sys-apps/debianutils-4.8.3 [4.7]
[ebuild U ] dev-lang/python-exec-2.4.5 [2.4.4]
[ebuild U ] sys-devel/autoconf-wrapper-13-r1 [13]
[ebuild U ] net-libs/libnsl-0-r1 [0]
[ebuild N ] dev-util/re2c-0.13.5-r1
[ebuild U ] sys-devel/patch-2.7.6-r1 [2.7.5]
[ebuild r U ] sys-libs/readline-7.0_p3 [6.3_p8-r3]
[ebuild U ] net-misc/rsync-3.1.3 [3.1.2-r2]
[ebuild rR ] sys-process/procps-3.3.12
[ebuild U ] app-shells/bash-4.4_p12 [4.3_p48-r1]
[ebuild U ] app-text/build-docbook-catalog-1.21 [1.19.1]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4 [7.100.200_rc-r3]
[ebuild U ] app-eselect/eselect-python-20171204 [20160516]
[ebuild U ] sys-apps/hwids-20171003 [20170328]
[ebuild U ] virtual/perl-File-Spec-3.630.100_rc-r4 [3.630.100_rc-r3]
[ebuild U ] virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r4 [1.441.700.100_rc-r3]
[ebuild U ] net-misc/netifrc-0.5.1 [0.2.2]
[ebuild U ] virtual/perl-JSON-PP-2.273.0.100_rc-r6 [2.273.0.100_rc-r5]
[ebuild U ] app-arch/xz-utils-5.2.3 [5.2.2]
[ebuild r U ] sys-apps/coreutils-8.29 [8.26]
[ebuild rR ] sys-apps/net-tools-1.60_p20161110235919
[ebuild rR ] app-portage/elt-patches-20170815
[ebuild rR ] sys-devel/m4-1.4.17
[ebuild U ] app-misc/pax-utils-1.2.3 [1.1.7]
[ebuild rR ] app-portage/portage-utils-0.62
[ebuild rR ] dev-libs/libltdl-2.4.6
[ebuild U ] dev-libs/libpcre-8.41-r1 [8.40-r1]
[ebuild rR ] dev-libs/gmp-6.1.2
[ebuild U ] app-admin/eselect-1.4.12 [1.4.8]
[ebuild U ] sys-apps/kmod-24 [23]
[ebuild U ] sys-apps/sandbox-2.13 [2.10-r4]
[ebuild rR ] sys-apps/less-529
[ebuild rR ] sys-auth/pambase-20150213-r1
[ebuild rR ] sys-kernel/linux-headers-4.13
[ebuild rR ] sys-apps/util-linux-2.30.2-r1
[ebuild rR ] sys-apps/s390-tools-1.36.1-r1
[ebuild rR ] sys-devel/binutils-2.29.1-r1
[ebuild U ] app-misc/ca-certificates-20170717.3.36.1 [20161130.3.30.2]
[ebuild rR ] sys-process/psmisc-22.21-r3
[ebuild rR ] sys-apps/openrc-0.34.11
[ebuild U ] dev-lang/perl-5.24.3-r1 [5.24.3]
[ebuild U ] sys-devel/automake-1.15.1-r2 [1.15.1-r1]
[ebuild rR ] dev-util/gtk-doc-am-1.25-r1
[ebuild rR ] sys-devel/libtool-2.4.6-r3
[ebuild rR ] dev-libs/libxml2-2.9.7
[ebuild rR ] sys-libs/gdbm-1.13-r2
[ebuild rR ] sys-devel/gettext-0.19.8.1
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild U ] dev-libs/libxslt-1.1.32 [1.1.30-r2]
[ebuild rR ] app-text/docbook-xml-dtd-4.5-r1
[ebuild r U ] sys-apps/gawk-4.1.4 [4.1.3]
[ebuild rR ] sys-apps/grep-3.0
[ebuild rR ] sys-apps/diffutils-3.3
[ebuild r U ] net-misc/wget-1.19.5 [1.19.1-r2]
[ebuild U ] sys-devel/flex-2.6.4-r1 [2.6.1]
[ebuild rR ] dev-python/appdirs-1.4.3
[ebuild rR ] dev-python/pyparsing-2.2.0
[ebuild rR ] app-text/po4a-0.47-r1
[ebuild N ] dev-util/ninja-1.8.2
[ebuild rR ] app-editors/nano-2.8.7
[ebuild r U ] sys-apps/shadow-4.6 [4.4-r2]
[ebuild rR ] sys-apps/texinfo-6.3
[ebuild rR ] sys-libs/pam-1.2.1-r2
[ebuild rR ] dev-libs/elfutils-0.170-r1
[ebuild rR ] sys-devel/bison-3.0.4-r1
[ebuild rR ] sys-apps/man-db-2.7.6.1-r2
[ebuild rR ] sys-devel/gcc-5.4.0-r4
[ebuild rR ] sys-apps/iproute2-4.14.1-r2
[ebuild rR ] dev-libs/glib-2.50.3-r1
[ebuild U ] x11-misc/shared-mime-info-1.9 [1.4]
[ebuild rR ] dev-python/packaging-16.8
[ebuild R ] sys-apps/portage-2.3.8
[ebuild rR ] dev-python/setuptools-34.0.2-r1
[ebuild U ] dev-python/six-1.11.0 [1.10.0]
[ebuild rR ] dev-python/pyxattr-0.5.5
[ebuild U ] dev-python/certifi-2018.4.16 [2017.4.17]
[ebuild N ] dev-util/meson-0.45.1
[ebuild r U ] sys-fs/udev-238 [233]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by @__auto_rebuild__ (argument)
=sys-apps/coreutils-8.29 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180529T071245Z/.catalyst_lock'
Command exited with non-zero status 1
46.65user 10.72system 1:05.18elapsed 88%CPU (0avgtext+0avgdata 176096maxresident)k
0inputs+0outputs (417major+2480791minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180529T071245Z.agU7mK/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-05-30 7:17 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-05-30 7:17 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180530T071321Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180530T071321Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180530T071321Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180530T071321Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180530T071321Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180530T071321Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180530T071321Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180530T071321Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180530T071321Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180530T071321Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180530T071321Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180530T071321Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180530T071321Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180530T071321Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180530T071321Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
The following packages are causing rebuilds:
(sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) causes rebuilds for:
(sys-apps/gawk-4.1.4:0/0::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, ebuild scheduled for merge)
(dev-libs/libxml2-2.9.7:2/2::gentoo, ebuild scheduled for merge)
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge)
(dev-libs/libpcre-8.41-r1:3/3::gentoo, ebuild scheduled for merge)
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
(sys-apps/util-linux-2.30.2-r1:0/0::gentoo, ebuild scheduled for merge)
(app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
[ebuild U ] sys-libs/glibc-2.25-r11 [2.25-r9]
[ebuild U ] sys-libs/ncurses-6.1-r2 [6.0-r1]
[ebuild U ] sys-apps/debianutils-4.8.3 [4.7]
[ebuild U ] dev-lang/python-exec-2.4.5 [2.4.4]
[ebuild U ] sys-devel/autoconf-wrapper-13-r1 [13]
[ebuild N ] dev-util/re2c-0.13.5-r1
[ebuild U ] net-libs/libnsl-0-r1 [0]
[ebuild U ] sys-libs/timezone-data-2018d [2017c]
[ebuild U ] sys-devel/patch-2.7.6-r1 [2.7.5]
[ebuild r U ] sys-libs/readline-7.0_p3 [6.3_p8-r3]
[ebuild U ] net-misc/rsync-3.1.3 [3.1.2-r2]
[ebuild r U ] sys-process/procps-3.3.15-r1 [3.3.12]
[ebuild U ] app-shells/bash-4.4_p12 [4.3_p48-r1]
[ebuild U ] app-text/build-docbook-catalog-1.21 [1.19.1]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4 [7.100.200_rc-r3]
[ebuild U ] app-eselect/eselect-python-20171204 [20160516]
[ebuild U ] virtual/perl-File-Spec-3.630.100_rc-r4 [3.630.100_rc-r3]
[ebuild U ] virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r4 [1.441.700.100_rc-r3]
[ebuild U ] sys-apps/hwids-20171003 [20170328]
[ebuild U ] net-misc/netifrc-0.5.1 [0.2.2]
[ebuild U ] virtual/perl-JSON-PP-2.273.0.100_rc-r6 [2.273.0.100_rc-r5]
[ebuild U ] app-arch/xz-utils-5.2.3 [5.2.2]
[ebuild U ] sys-apps/coreutils-8.28-r1 [8.26]
[ebuild rR ] sys-apps/net-tools-1.60_p20161110235919
[ebuild rR ] app-portage/elt-patches-20170815
[ebuild rR ] sys-devel/m4-1.4.17
[ebuild U ] app-misc/pax-utils-1.2.3 [1.1.7]
[ebuild rR ] app-portage/portage-utils-0.62
[ebuild rR ] dev-libs/libltdl-2.4.6
[ebuild U ] dev-libs/libpcre-8.41-r1 [8.40-r1]
[ebuild rR ] dev-libs/gmp-6.1.2
[ebuild U ] app-admin/eselect-1.4.12 [1.4.8]
[ebuild U ] sys-apps/kmod-24 [23]
[ebuild U ] sys-apps/sandbox-2.13 [2.10-r4]
[ebuild rR ] sys-apps/less-529
[ebuild rR ] sys-auth/pambase-20150213-r1
[ebuild rR ] sys-kernel/linux-headers-4.13
[ebuild rR ] sys-apps/util-linux-2.30.2-r1
[ebuild rR ] sys-apps/s390-tools-1.36.1-r1
[ebuild rR ] sys-devel/binutils-2.29.1-r1
[ebuild U ] app-misc/ca-certificates-20170717.3.36.1 [20161130.3.30.2]
[ebuild rR ] sys-process/psmisc-22.21-r3
[ebuild rR ] sys-apps/openrc-0.34.11
[ebuild U ] dev-lang/perl-5.24.3-r1 [5.24.3]
[ebuild U ] sys-devel/automake-1.15.1-r2 [1.15.1-r1]
[ebuild rR ] dev-util/gtk-doc-am-1.25-r1
[ebuild rR ] sys-devel/libtool-2.4.6-r3
[ebuild rR ] dev-libs/libxml2-2.9.7
[ebuild rR ] sys-libs/gdbm-1.13-r2
[ebuild rR ] sys-devel/gettext-0.19.8.1
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild U ] dev-libs/libxslt-1.1.32 [1.1.30-r2]
[ebuild rR ] app-text/docbook-xml-dtd-4.5-r1
[ebuild rR ] sys-apps/diffutils-3.3
[ebuild r U ] net-misc/wget-1.19.5 [1.19.1-r2]
[ebuild rR ] sys-apps/grep-3.0
[ebuild r U ] sys-apps/gawk-4.1.4 [4.1.3]
[ebuild U ] sys-devel/flex-2.6.4-r1 [2.6.1]
[ebuild rR ] app-text/po4a-0.47-r1
[ebuild rR ] dev-python/pyparsing-2.2.0
[ebuild rR ] dev-python/appdirs-1.4.3
[ebuild N ] dev-util/ninja-1.8.2
[ebuild rR ] sys-apps/texinfo-6.3
[ebuild rR ] app-editors/nano-2.8.7
[ebuild r U ] sys-apps/shadow-4.6 [4.4-r2]
[ebuild rR ] sys-libs/pam-1.2.1-r2
[ebuild rR ] dev-libs/elfutils-0.170-r1
[ebuild rR ] sys-devel/bison-3.0.4-r1
[ebuild rR ] sys-apps/man-db-2.7.6.1-r2
[ebuild rR ] sys-devel/gcc-5.4.0-r4
[ebuild rR ] sys-apps/iproute2-4.14.1-r2
[ebuild rR ] dev-libs/glib-2.50.3-r1
[ebuild U ] x11-misc/shared-mime-info-1.9 [1.4]
[ebuild rR ] dev-python/packaging-16.8
[ebuild R ] sys-apps/portage-2.3.8
[ebuild rR ] dev-python/setuptools-34.0.2-r1
[ebuild U ] dev-python/six-1.11.0 [1.10.0]
[ebuild rR ] dev-python/pyxattr-0.5.5
[ebuild U ] dev-python/certifi-2018.4.16 [2017.4.17]
[ebuild N ] dev-util/meson-0.45.1
[ebuild r U ] sys-fs/udev-238 [233]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by @__auto_rebuild__ (argument)
=sys-process/procps-3.3.15-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180530T071321Z/.catalyst_lock'
Command exited with non-zero status 1
46.56user 10.28system 1:27.92elapsed 64%CPU (0avgtext+0avgdata 176848maxresident)k
0inputs+0outputs (422major+2479128minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180530T071321Z.LCPkvk/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-05-31 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-05-31 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Building natively for s390
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20180531T071222Z/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180531T071222Z/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20180531T071222Z/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-s390-20180531T071222Z/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-s390-20180531T071222Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180531T071222Z/
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20180531T071222Z/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-s390-20180531T071222Z/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-s390-20180531T071222Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180531T071222Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180531T071222Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180531T071222Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180531T071222Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180531T071222Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180531T071222Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
The following packages are causing rebuilds:
(sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) causes rebuilds for:
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge)
(dev-libs/libpcre-8.41-r1:3/3::gentoo, ebuild scheduled for merge)
(sys-apps/gawk-4.1.4:0/0::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, ebuild scheduled for merge)
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
(sys-apps/util-linux-2.30.2-r1:0/0::gentoo, ebuild scheduled for merge)
(dev-libs/libxml2-2.9.7:2/2::gentoo, ebuild scheduled for merge)
(app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
[ebuild U ] sys-libs/glibc-2.25-r11 [2.25-r9]
[ebuild U ] sys-libs/ncurses-6.1-r2 [6.0-r1]
[ebuild U ] sys-apps/debianutils-4.8.3 [4.7]
[ebuild U ] dev-lang/python-exec-2.4.5 [2.4.4]
[ebuild U ] sys-devel/autoconf-wrapper-13-r1 [13]
[ebuild U ] net-libs/libnsl-0-r1 [0]
[ebuild N ] dev-util/re2c-0.13.5-r1
[ebuild U ] sys-libs/timezone-data-2018d [2017c]
[ebuild U ] sys-devel/patch-2.7.6-r1 [2.7.5]
[ebuild r U ] sys-libs/readline-7.0_p3 [6.3_p8-r3]
[ebuild U ] net-misc/rsync-3.1.3 [3.1.2-r2]
[ebuild r U ] sys-process/procps-3.3.15-r1 [3.3.12]
[ebuild U ] app-shells/bash-4.4_p12 [4.3_p48-r1]
[ebuild U ] app-text/build-docbook-catalog-1.21 [1.19.1]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4 [7.100.200_rc-r3]
[ebuild U ] app-eselect/eselect-python-20171204 [20160516]
[ebuild U ] sys-apps/hwids-20171003 [20170328]
[ebuild U ] virtual/perl-File-Spec-3.630.100_rc-r4 [3.630.100_rc-r3]
[ebuild U ] virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r4 [1.441.700.100_rc-r3]
[ebuild U ] net-misc/netifrc-0.5.1 [0.2.2]
[ebuild U ] virtual/perl-JSON-PP-2.273.0.100_rc-r6 [2.273.0.100_rc-r5]
[ebuild U ] app-arch/xz-utils-5.2.3 [5.2.2]
[ebuild U ] sys-apps/coreutils-8.28-r1 [8.26]
[ebuild rR ] sys-apps/net-tools-1.60_p20161110235919
[ebuild rR ] app-portage/elt-patches-20170815
[ebuild rR ] sys-devel/m4-1.4.17
[ebuild U ] app-misc/pax-utils-1.2.3 [1.1.7]
[ebuild rR ] app-portage/portage-utils-0.62
[ebuild rR ] dev-libs/libltdl-2.4.6
[ebuild U ] dev-libs/libpcre-8.41-r1 [8.40-r1]
[ebuild rR ] dev-libs/gmp-6.1.2
[ebuild U ] app-admin/eselect-1.4.12 [1.4.8]
[ebuild U ] sys-apps/kmod-24 [23]
[ebuild U ] sys-apps/sandbox-2.13 [2.10-r4]
[ebuild rR ] sys-apps/less-529
[ebuild rR ] sys-auth/pambase-20150213-r1
[ebuild rR ] sys-kernel/linux-headers-4.13
[ebuild U ] dev-libs/openssl-1.0.2o [1.0.2n]
[ebuild r U ] net-misc/iputils-20171016_pre-r1 [20151218]
[ebuild rR ] sys-apps/util-linux-2.30.2-r1
[ebuild rR ] sys-apps/s390-tools-1.36.1-r1
[ebuild rR ] sys-devel/binutils-2.29.1-r1
[ebuild U ] app-misc/ca-certificates-20170717.3.36.1 [20161130.3.30.2]
[ebuild rR ] sys-process/psmisc-22.21-r3
[ebuild rR ] sys-apps/openrc-0.34.11
[ebuild U ] dev-lang/perl-5.24.3-r1 [5.24.3]
[ebuild U ] sys-devel/automake-1.15.1-r2 [1.15.1-r1]
[ebuild rR ] dev-util/gtk-doc-am-1.25-r1
[ebuild rR ] sys-devel/libtool-2.4.6-r3
[ebuild rR ] dev-libs/libxml2-2.9.7
[ebuild rR ] sys-libs/gdbm-1.13-r2
[ebuild rR ] net-misc/openssh-7.5_p1-r4
[ebuild rR ] sys-devel/gettext-0.19.8.1
[ebuild rR ] dev-lang/python-3.5.4-r1
[ebuild rR ] dev-lang/python-2.7.14-r1
[ebuild U ] dev-libs/libxslt-1.1.32 [1.1.30-r2]
[ebuild rR ] app-text/docbook-xml-dtd-4.5-r1
[ebuild r U ] sys-apps/shadow-4.6 [4.4-r2]
[ebuild r U ] sys-apps/gawk-4.1.4 [4.1.3]
[ebuild rR ] sys-apps/diffutils-3.3
[ebuild rR ] sys-apps/grep-3.0
[ebuild r U ] net-misc/wget-1.19.5 [1.19.1-r2]
[ebuild U ] sys-devel/flex-2.6.4-r1 [2.6.1]
[ebuild rR ] dev-python/pyparsing-2.2.0
[ebuild rR ] app-text/po4a-0.47-r1
[ebuild rR ] dev-python/appdirs-1.4.3
[ebuild N ] dev-util/ninja-1.8.2
[ebuild rR ] app-editors/nano-2.8.7
[ebuild rR ] sys-apps/texinfo-6.3
[ebuild rR ] sys-libs/pam-1.2.1-r2
[ebuild rR ] dev-libs/elfutils-0.170-r1
[ebuild rR ] sys-devel/bison-3.0.4-r1
[ebuild rR ] sys-apps/man-db-2.7.6.1-r2
[ebuild rR ] sys-devel/gcc-5.4.0-r4
[ebuild rR ] sys-apps/iproute2-4.14.1-r2
[ebuild rR ] dev-libs/glib-2.50.3-r1
[ebuild U ] x11-misc/shared-mime-info-1.9 [1.4]
[ebuild rR ] dev-python/packaging-16.8
[ebuild R ] sys-apps/portage-2.3.8
[ebuild rR ] dev-python/setuptools-34.0.2-r1
[ebuild U ] dev-python/six-1.11.0 [1.10.0]
[ebuild rR ] dev-python/pyxattr-0.5.5
[ebuild U ] dev-python/certifi-2018.4.16 [2017.4.17]
[ebuild N ] dev-util/meson-0.45.1
[ebuild r U ] sys-fs/udev-238 [233]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by @__auto_rebuild__ (argument)
=net-misc/iputils-20171016_pre-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180531T071222Z/.catalyst_lock'
Command exited with non-zero status 1
46.26user 10.02system 1:01.84elapsed 91%CPU (0avgtext+0avgdata 179984maxresident)k
0inputs+0outputs (513major+2479866minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180531T071222Z.Cp0tRj/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-07-26 7:27 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-07-26 7:27 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Installing (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Emerging (20 of 20) sys-fs/udev-238::gentoo
>>> Installing (20 of 20) sys-fs/udev-238::gentoo
* Messages for package sys-apps/coreutils-8.29-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.32-r4:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - INOTIFY_USER
* You're on your own to make sure they are set if needed.
* Messages for package sys-fs/udev-238:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - BLK_DEV_BSG
* - DEVTMPFS
* - IDE
* - INOTIFY_USER
* - SYSFS_DEPRECATED
* - SYSFS_DEPRECATED_V2
* - SIGNALFD
* - EPOLL
* - FHANDLE
* - NET
* - FW_LOADER_USER_HELPER
* - UNIX
* You're on your own to make sure they are set if needed.
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* https://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/make sys-apps/gawk sys-apps/findutils sys-devel/flex sys-devel/gnuconfig sys-devel/gettext app-arch/tar sys-apps/portage sys-devel/libtool net-misc/wget app-shells/bash:0 sys-devel/automake sys-devel/autoconf virtual/libc virtual/os-headers app-arch/bzip2 sys-apps/net-tools sys-apps/baselayout sys-devel/bison sys-devel/gcc virtual/editor virtual/shadow app-arch/gzip sys-apps/grep sys-apps/makedev sys-devel/binutils sys-apps/coreutils sys-apps/sed sys-apps/file virtual/pkgconfig sys-devel/patch sys-apps/less net-misc/rsync sys-apps/which app-arch/xz-utils sys-apps/diffutils
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r9 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.30 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.5 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2018d to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.4 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.6-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.5 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.33-r4 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.6 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.30-r2 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.12 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.64 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.26-r7 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0_p3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4_p12 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.6.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.40-r1 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.5 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-7.3.0-r3 to /tmp/stage1root/
[ebuild N ] virtual/editor-0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.8 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.8.1::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.8 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180726T071337Z/.catalyst_lock'
Command exited with non-zero status 1
776.42user 196.94system 12:36.07elapsed 128%CPU (0avgtext+0avgdata 472560maxresident)k
0inputs+0outputs (838major+99569514minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180726T071337Z.6Roa4r/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-07-27 7:28 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-07-27 7:28 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Installing (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Emerging (20 of 20) sys-fs/udev-238::gentoo
>>> Installing (20 of 20) sys-fs/udev-238::gentoo
* Messages for package sys-apps/coreutils-8.29-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.32-r4:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - INOTIFY_USER
* You're on your own to make sure they are set if needed.
* Messages for package sys-fs/udev-238:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - BLK_DEV_BSG
* - DEVTMPFS
* - IDE
* - INOTIFY_USER
* - SYSFS_DEPRECATED
* - SYSFS_DEPRECATED_V2
* - SIGNALFD
* - EPOLL
* - FHANDLE
* - NET
* - FW_LOADER_USER_HELPER
* - UNIX
* You're on your own to make sure they are set if needed.
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* https://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-arch/xz-utils sys-devel/make sys-apps/which sys-devel/flex virtual/libc virtual/shadow app-shells/bash:0 sys-apps/sed sys-apps/coreutils virtual/editor sys-apps/findutils net-misc/wget sys-apps/file sys-apps/gawk sys-devel/gnuconfig virtual/pkgconfig sys-apps/grep sys-apps/net-tools sys-devel/automake virtual/os-headers sys-devel/bison net-misc/rsync app-arch/tar app-arch/gzip sys-apps/baselayout sys-devel/gcc sys-devel/binutils sys-apps/less sys-devel/gettext sys-apps/portage sys-devel/patch app-arch/bzip2 sys-apps/makedev sys-devel/libtool sys-devel/autoconf sys-apps/diffutils
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r9 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.5 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.30 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2018d to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.4 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.6-r1 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.5 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.33-r4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.6 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.30-r2 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.12 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.64 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.26-r7 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0_p3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4_p12 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.6.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.40-r1 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0-r1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.5 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-7.3.0-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.8 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.8.1::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.8 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180727T071348Z/.catalyst_lock'
Command exited with non-zero status 1
777.69user 200.96system 12:45.26elapsed 127%CPU (0avgtext+0avgdata 471952maxresident)k
0inputs+0outputs (716major+99556948minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180727T071348Z.SWvQSV/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-07-28 7:28 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-07-28 7:28 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* Messages for package sys-apps/coreutils-8.29-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.32-r4:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - INOTIFY_USER
* You're on your own to make sure they are set if needed.
* Messages for package sys-fs/udev-238:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - BLK_DEV_BSG
* - DEVTMPFS
* - IDE
* - INOTIFY_USER
* - SYSFS_DEPRECATED
* - SYSFS_DEPRECATED_V2
* - SIGNALFD
* - EPOLL
* - FHANDLE
* - NET
* - FW_LOADER_USER_HELPER
* - UNIX
* You're on your own to make sure they are set if needed.
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* https://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
--- Invalid atom in /usr/portage/profiles/arch/s390/package.use.mask: net-analyzer/nmap/nmap
--- Invalid atom in /usr/portage/profiles/arch/s390/package.use.mask: net-analyzer/nmap/nmap
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep virtual/pkgconfig sys-devel/gnuconfig sys-devel/libtool virtual/os-headers app-arch/gzip virtual/shadow app-arch/bzip2 virtual/editor net-misc/wget net-misc/rsync sys-devel/flex sys-apps/which sys-apps/portage sys-devel/autoconf sys-apps/file sys-apps/net-tools sys-devel/make sys-devel/bison sys-devel/gettext sys-apps/baselayout sys-apps/makedev sys-apps/sed sys-apps/gawk app-shells/bash:0 app-arch/xz-utils sys-devel/gcc virtual/libc sys-apps/less sys-apps/findutils sys-devel/patch app-arch/tar sys-apps/diffutils sys-devel/automake sys-devel/binutils sys-apps/coreutils
--- Invalid atom in /usr/portage/profiles/arch/s390/package.use.mask: net-analyzer/nmap/nmap
--- Invalid atom in /usr/portage/profiles/arch/s390/package.use.mask: net-analyzer/nmap/nmap
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r9 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.5 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.30 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2018d to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.4 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.6-r1 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.5 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.5 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.33-r4 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.6 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.30-r2 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.12 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.64 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.26-r7 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0_p3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4_p12 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.8 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.6.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.40-r1 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] virtual/editor-0-r1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.5 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-7.3.0-r3 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.8.1::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.8 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180728T071411Z/.catalyst_lock'
Command exited with non-zero status 1
775.72user 195.46system 12:27.00elapsed 130%CPU (0avgtext+0avgdata 472000maxresident)k
0inputs+0outputs (846major+99626530minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180728T071411Z.du7pey/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-07-29 7:26 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-07-29 7:26 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* Messages for package sys-apps/coreutils-8.29-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.32-r4:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - INOTIFY_USER
* You're on your own to make sure they are set if needed.
* Messages for package sys-fs/udev-238:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - BLK_DEV_BSG
* - DEVTMPFS
* - IDE
* - INOTIFY_USER
* - SYSFS_DEPRECATED
* - SYSFS_DEPRECATED_V2
* - SIGNALFD
* - EPOLL
* - FHANDLE
* - NET
* - FW_LOADER_USER_HELPER
* - UNIX
* You're on your own to make sure they are set if needed.
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* https://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
--- Invalid atom in /usr/portage/profiles/arch/s390/package.use.mask: net-analyzer/nmap/nmap
--- Invalid atom in /usr/portage/profiles/arch/s390/package.use.mask: net-analyzer/nmap/nmap
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/binutils app-arch/tar sys-devel/libtool sys-apps/diffutils sys-devel/make sys-devel/gnuconfig sys-devel/patch virtual/os-headers sys-apps/baselayout sys-devel/automake sys-apps/sed sys-apps/coreutils app-shells/bash:0 sys-devel/gettext net-misc/wget app-arch/gzip sys-apps/grep virtual/shadow sys-apps/portage net-misc/rsync sys-apps/net-tools virtual/pkgconfig sys-devel/autoconf sys-devel/flex sys-apps/gawk sys-devel/bison sys-apps/less sys-apps/findutils virtual/libc sys-apps/which sys-apps/makedev sys-apps/file app-arch/xz-utils app-arch/bzip2 virtual/editor sys-devel/gcc
--- Invalid atom in /usr/portage/profiles/arch/s390/package.use.mask: net-analyzer/nmap/nmap
--- Invalid atom in /usr/portage/profiles/arch/s390/package.use.mask: net-analyzer/nmap/nmap
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r9 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.30 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.5 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2018d to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.6-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.4 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.5 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.33-r4 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.6 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.30-r2 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.12 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.64 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.26-r7 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0_p3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4_p12 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.6.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.40-r1 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.5 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.3 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-7.3.0-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.8 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.8.1::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.8 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180729T071230Z/.catalyst_lock'
Command exited with non-zero status 1
774.11user 194.42system 12:31.58elapsed 128%CPU (0avgtext+0avgdata 472624maxresident)k
0inputs+0outputs (713major+99449596minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180729T071230Z.TcIZJE/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-07-30 7:27 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-07-30 7:27 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* Messages for package sys-apps/coreutils-8.29-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.32-r4:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - INOTIFY_USER
* You're on your own to make sure they are set if needed.
* Messages for package sys-fs/udev-238:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - BLK_DEV_BSG
* - DEVTMPFS
* - IDE
* - INOTIFY_USER
* - SYSFS_DEPRECATED
* - SYSFS_DEPRECATED_V2
* - SIGNALFD
* - EPOLL
* - FHANDLE
* - NET
* - FW_LOADER_USER_HELPER
* - UNIX
* You're on your own to make sure they are set if needed.
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* https://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
--- Invalid atom in /usr/portage/profiles/arch/s390/package.use.mask: net-analyzer/nmap/nmap
--- Invalid atom in /usr/portage/profiles/arch/s390/package.use.mask: net-analyzer/nmap/nmap
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/gettext sys-apps/findutils sys-devel/autoconf sys-apps/less sys-devel/flex virtual/os-headers net-misc/rsync sys-devel/gcc sys-apps/makedev virtual/shadow app-shells/bash:0 sys-devel/patch sys-apps/file app-arch/gzip sys-apps/sed sys-apps/baselayout virtual/libc app-arch/tar sys-devel/libtool sys-apps/which sys-devel/bison sys-apps/diffutils virtual/editor sys-devel/binutils net-misc/wget sys-apps/grep sys-devel/make virtual/pkgconfig sys-apps/portage sys-devel/gnuconfig sys-devel/automake sys-apps/net-tools app-arch/xz-utils sys-apps/coreutils app-arch/bzip2 sys-apps/gawk
--- Invalid atom in /usr/portage/profiles/arch/s390/package.use.mask: net-analyzer/nmap/nmap
--- Invalid atom in /usr/portage/profiles/arch/s390/package.use.mask: net-analyzer/nmap/nmap
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r9 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.5 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.30 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2018d to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.6-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.4 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.5 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.5 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.33-r4 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.6 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.30-r2 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.12 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.64 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.26-r7 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0_p3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4_p12 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.6.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.40-r1 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-7.3.0-r3 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0-r1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.5 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.8 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.8.1::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.8 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180730T071350Z/.catalyst_lock'
Command exited with non-zero status 1
773.80user 191.31system 12:21.89elapsed 130%CPU (0avgtext+0avgdata 473008maxresident)k
0inputs+0outputs (762major+99481812minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180730T071350Z.Og34aA/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-07-31 7:49 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-07-31 7:49 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* Messages for package sys-apps/coreutils-8.29-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.32-r4:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - INOTIFY_USER
* You're on your own to make sure they are set if needed.
* Messages for package sys-fs/udev-238:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - BLK_DEV_BSG
* - DEVTMPFS
* - IDE
* - INOTIFY_USER
* - SYSFS_DEPRECATED
* - SYSFS_DEPRECATED_V2
* - SIGNALFD
* - EPOLL
* - FHANDLE
* - NET
* - FW_LOADER_USER_HELPER
* - UNIX
* You're on your own to make sure they are set if needed.
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* https://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
--- Invalid atom in /usr/portage/profiles/arch/s390/package.use.mask: net-analyzer/nmap/nmap
--- Invalid atom in /usr/portage/profiles/arch/s390/package.use.mask: net-analyzer/nmap/nmap
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/autoconf app-arch/gzip sys-apps/coreutils app-arch/tar app-shells/bash:0 app-arch/bzip2 sys-apps/grep sys-devel/gcc sys-devel/gettext sys-apps/makedev virtual/shadow sys-devel/libtool sys-apps/file sys-apps/baselayout sys-devel/gnuconfig virtual/editor app-arch/xz-utils virtual/os-headers sys-apps/portage sys-apps/diffutils sys-apps/sed sys-devel/patch sys-devel/automake sys-apps/which sys-devel/bison sys-apps/gawk sys-devel/binutils sys-apps/less sys-devel/make sys-apps/findutils net-misc/wget virtual/libc sys-devel/flex virtual/pkgconfig sys-apps/net-tools net-misc/rsync
--- Invalid atom in /usr/portage/profiles/arch/s390/package.use.mask: net-analyzer/nmap/nmap
--- Invalid atom in /usr/portage/profiles/arch/s390/package.use.mask: net-analyzer/nmap/nmap
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r9 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.30 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.5 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2018d to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.6-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.4 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.5 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.5 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.33-r4 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.6 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.30-r2 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.12 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.64 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.26-r7 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0_p3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4_p12 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.6.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.40-r1 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-7.3.0-r3 to /tmp/stage1root/
[ebuild N ] virtual/editor-0-r1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.5 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.8 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.8.1::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.8 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180731T073515Z/.catalyst_lock'
Command exited with non-zero status 1
775.71user 194.56system 12:26.42elapsed 129%CPU (0avgtext+0avgdata 472304maxresident)k
0inputs+0outputs (839major+99582916minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180731T073515Z.UycCST/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-08-01 7:27 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-08-01 7:27 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Installing (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Emerging (20 of 20) sys-fs/udev-238::gentoo
>>> Installing (20 of 20) sys-fs/udev-238::gentoo
* Messages for package sys-apps/coreutils-8.29-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.32-r4:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - INOTIFY_USER
* You're on your own to make sure they are set if needed.
* Messages for package sys-fs/udev-238:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - BLK_DEV_BSG
* - DEVTMPFS
* - IDE
* - INOTIFY_USER
* - SYSFS_DEPRECATED
* - SYSFS_DEPRECATED_V2
* - SIGNALFD
* - EPOLL
* - FHANDLE
* - NET
* - FW_LOADER_USER_HELPER
* - UNIX
* You're on your own to make sure they are set if needed.
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* https://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot virtual/libc app-arch/tar sys-devel/flex sys-devel/autoconf virtual/shadow sys-apps/portage sys-devel/binutils sys-apps/less app-shells/bash:0 virtual/editor sys-apps/net-tools sys-devel/automake sys-apps/makedev sys-apps/grep sys-devel/libtool sys-devel/gcc sys-apps/gawk virtual/os-headers sys-devel/bison virtual/pkgconfig sys-devel/make sys-devel/gnuconfig sys-devel/gettext app-arch/gzip app-arch/xz-utils sys-apps/which sys-apps/diffutils sys-apps/file app-arch/bzip2 net-misc/rsync sys-devel/patch sys-apps/coreutils net-misc/wget sys-apps/findutils sys-apps/sed sys-apps/baselayout
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r9 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.30 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.5 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2018d to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.4 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.6-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.5 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.5 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.33-r4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.6 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.30-r2 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.12 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.64 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.26-r7 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0_p3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4_p12 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.8 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.6.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.40-r1 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-7.3.0-r3 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.3 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.5 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.8.1::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.8 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180801T071326Z/.catalyst_lock'
Command exited with non-zero status 1
772.46user 191.29system 12:19.56elapsed 130%CPU (0avgtext+0avgdata 473024maxresident)k
0inputs+0outputs (719major+99424143minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180801T071326Z.1qRJYe/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-08-02 7:27 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-08-02 7:27 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Installing (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Emerging (20 of 20) sys-fs/udev-238::gentoo
>>> Installing (20 of 20) sys-fs/udev-238::gentoo
* Messages for package sys-apps/coreutils-8.29-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.32-r4:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - INOTIFY_USER
* You're on your own to make sure they are set if needed.
* Messages for package sys-fs/udev-238:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - BLK_DEV_BSG
* - DEVTMPFS
* - IDE
* - INOTIFY_USER
* - SYSFS_DEPRECATED
* - SYSFS_DEPRECATED_V2
* - SIGNALFD
* - EPOLL
* - FHANDLE
* - NET
* - FW_LOADER_USER_HELPER
* - UNIX
* You're on your own to make sure they are set if needed.
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* https://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/diffutils sys-devel/gcc virtual/os-headers sys-devel/binutils sys-apps/which sys-devel/libtool sys-devel/gettext sys-apps/less sys-devel/automake sys-apps/baselayout sys-devel/flex net-misc/wget virtual/editor sys-devel/gnuconfig sys-devel/make sys-apps/findutils virtual/pkgconfig sys-apps/makedev sys-devel/patch app-arch/bzip2 virtual/libc app-shells/bash:0 app-arch/gzip sys-apps/portage net-misc/rsync app-arch/tar sys-apps/coreutils sys-devel/autoconf sys-apps/gawk sys-apps/grep sys-devel/bison app-arch/xz-utils sys-apps/net-tools sys-apps/file sys-apps/sed virtual/shadow
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r9 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.30 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.5 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2018d to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.6-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.4 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.5 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.33-r4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.6 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.30-r2 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.12 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.64 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.26-r7 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0_p3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4_p12 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.6.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.40-r1 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-7.3.0-r3 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.5 to /tmp/stage1root/
[ebuild N ] virtual/editor-0-r1 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.8 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.8.1::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.8 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180802T071336Z/.catalyst_lock'
Command exited with non-zero status 1
773.58user 192.19system 12:27.12elapsed 129%CPU (0avgtext+0avgdata 471792maxresident)k
0inputs+0outputs (829major+99501380minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180802T071336Z.Y6mzFS/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-08-03 7:27 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-08-03 7:27 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Installing (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Emerging (20 of 20) sys-fs/udev-238::gentoo
>>> Installing (20 of 20) sys-fs/udev-238::gentoo
* Messages for package sys-apps/coreutils-8.29-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.32-r4:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - INOTIFY_USER
* You're on your own to make sure they are set if needed.
* Messages for package sys-fs/udev-238:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - BLK_DEV_BSG
* - DEVTMPFS
* - IDE
* - INOTIFY_USER
* - SYSFS_DEPRECATED
* - SYSFS_DEPRECATED_V2
* - SIGNALFD
* - EPOLL
* - FHANDLE
* - NET
* - FW_LOADER_USER_HELPER
* - UNIX
* You're on your own to make sure they are set if needed.
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* https://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot virtual/libc sys-devel/automake sys-apps/makedev sys-devel/patch sys-devel/bison sys-devel/autoconf app-shells/bash:0 sys-apps/sed sys-apps/net-tools net-misc/rsync virtual/editor app-arch/bzip2 sys-apps/which app-arch/xz-utils app-arch/tar sys-devel/libtool app-arch/gzip sys-apps/baselayout net-misc/wget sys-apps/coreutils sys-devel/binutils sys-devel/flex sys-devel/gettext sys-apps/grep sys-apps/gawk sys-apps/portage virtual/shadow sys-apps/less sys-devel/make sys-devel/gcc virtual/pkgconfig sys-apps/diffutils virtual/os-headers sys-apps/file sys-apps/findutils sys-devel/gnuconfig
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r9 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.5 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.30 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2018d to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.6-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.4 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.5 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.33-r4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.6 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.30-r2 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.12 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.64 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.26-r7 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0_p3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4_p12 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.6.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.40-r1 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.3 to /tmp/stage1root/
[ebuild N ] virtual/editor-0-r1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.5 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-7.3.0-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.8 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.8.1::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.8 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180803T071315Z/.catalyst_lock'
Command exited with non-zero status 1
772.47user 190.94system 12:20.10elapsed 130%CPU (0avgtext+0avgdata 472352maxresident)k
0inputs+0outputs (847major+99587351minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180803T071315Z.IKxba4/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-08-04 7:28 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-08-04 7:28 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Installing (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Emerging (20 of 20) sys-fs/udev-238::gentoo
>>> Installing (20 of 20) sys-fs/udev-238::gentoo
* Messages for package sys-apps/coreutils-8.29-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.32-r4:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - INOTIFY_USER
* You're on your own to make sure they are set if needed.
* Messages for package sys-fs/udev-238:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - BLK_DEV_BSG
* - DEVTMPFS
* - IDE
* - INOTIFY_USER
* - SYSFS_DEPRECATED
* - SYSFS_DEPRECATED_V2
* - SIGNALFD
* - EPOLL
* - FHANDLE
* - NET
* - FW_LOADER_USER_HELPER
* - UNIX
* You're on your own to make sure they are set if needed.
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* https://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/baselayout sys-devel/libtool app-arch/tar sys-apps/diffutils sys-apps/net-tools sys-devel/patch sys-devel/gnuconfig sys-apps/coreutils sys-apps/gawk sys-devel/make app-arch/xz-utils sys-apps/grep app-arch/gzip net-misc/rsync sys-devel/gettext virtual/libc sys-devel/binutils sys-apps/findutils virtual/shadow sys-devel/autoconf app-shells/bash:0 sys-devel/automake sys-devel/flex sys-apps/less app-arch/bzip2 sys-apps/makedev sys-devel/gcc sys-devel/bison virtual/os-headers virtual/editor virtual/pkgconfig sys-apps/sed sys-apps/which net-misc/wget sys-apps/portage sys-apps/file
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r9 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.30 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.5 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2018d to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.6-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.4 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.5 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.5 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.33-r4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.6 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.30-r2 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.12 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.64 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.26-r7 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0_p3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4_p12 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.6.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.40-r1 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.3 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-7.3.0-r3 to /tmp/stage1root/
[ebuild N ] virtual/editor-0-r1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.5 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.8 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.8.1::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.8 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180804T071347Z/.catalyst_lock'
Command exited with non-zero status 1
778.74user 203.99system 12:39.85elapsed 129%CPU (0avgtext+0avgdata 471920maxresident)k
0inputs+0outputs (847major+99569362minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180804T071347Z.aS9SBp/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-08-05 7:32 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-08-05 7:32 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Installing (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Emerging (20 of 20) sys-fs/udev-238::gentoo
>>> Installing (20 of 20) sys-fs/udev-238::gentoo
* Messages for package sys-apps/coreutils-8.29-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.32-r4:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - INOTIFY_USER
* You're on your own to make sure they are set if needed.
* Messages for package sys-fs/udev-238:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - BLK_DEV_BSG
* - DEVTMPFS
* - IDE
* - INOTIFY_USER
* - SYSFS_DEPRECATED
* - SYSFS_DEPRECATED_V2
* - SIGNALFD
* - EPOLL
* - FHANDLE
* - NET
* - FW_LOADER_USER_HELPER
* - UNIX
* You're on your own to make sure they are set if needed.
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* https://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot net-misc/wget sys-devel/bison sys-devel/libtool sys-apps/gawk sys-apps/findutils sys-devel/patch sys-devel/flex sys-devel/automake sys-devel/gcc sys-apps/less app-arch/gzip sys-apps/baselayout virtual/os-headers sys-apps/sed virtual/shadow net-misc/rsync sys-apps/net-tools sys-devel/autoconf sys-apps/which app-arch/tar sys-apps/makedev sys-devel/gnuconfig sys-devel/gettext virtual/pkgconfig sys-apps/coreutils virtual/libc app-arch/bzip2 sys-apps/grep app-arch/xz-utils virtual/editor sys-devel/make sys-apps/diffutils sys-devel/binutils sys-apps/portage sys-apps/file app-shells/bash:0
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r9 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.5 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.30 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2018d to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.4 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.6-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.2.1-r3 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.5 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.33-r4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.6 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.30-r2 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.12 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.64 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.26-r7 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0_p3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4_p12 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.6.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.40-r1 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.5 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-7.3.0-r3 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.3 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] virtual/editor-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.8 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.8.1::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.8 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180805T071752Z/.catalyst_lock'
Command exited with non-zero status 1
775.64user 196.54system 12:35.40elapsed 128%CPU (0avgtext+0avgdata 472352maxresident)k
0inputs+0outputs (814major+99484176minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180805T071752Z.gaGMdX/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-08-06 7:27 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-08-06 7:27 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Installing (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Emerging (20 of 20) sys-fs/udev-238::gentoo
>>> Installing (20 of 20) sys-fs/udev-238::gentoo
* Messages for package sys-apps/coreutils-8.29-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.32-r4:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - INOTIFY_USER
* You're on your own to make sure they are set if needed.
* Messages for package sys-fs/udev-238:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - BLK_DEV_BSG
* - DEVTMPFS
* - IDE
* - INOTIFY_USER
* - SYSFS_DEPRECATED
* - SYSFS_DEPRECATED_V2
* - SIGNALFD
* - EPOLL
* - FHANDLE
* - NET
* - FW_LOADER_USER_HELPER
* - UNIX
* You're on your own to make sure they are set if needed.
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* https://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot virtual/os-headers sys-devel/gettext sys-devel/gcc sys-apps/makedev sys-apps/coreutils sys-devel/autoconf sys-devel/gnuconfig sys-apps/less sys-apps/sed sys-apps/baselayout sys-devel/binutils app-arch/bzip2 virtual/libc sys-apps/diffutils sys-devel/automake app-arch/gzip sys-apps/which net-misc/wget sys-devel/bison sys-apps/gawk sys-apps/grep sys-apps/file app-arch/tar virtual/shadow app-shells/bash:0 net-misc/rsync sys-apps/net-tools app-arch/xz-utils sys-devel/make virtual/pkgconfig sys-devel/patch sys-devel/libtool virtual/editor sys-devel/flex sys-apps/findutils sys-apps/portage
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r9 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.5 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.30 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2018d to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.4 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.2.1-r3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.6-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.5 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.5 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.33-r4 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.6 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.30-r2 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.12 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.64 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.26-r7 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0_p3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4_p12 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.6.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.40-r1 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-7.3.0-r3 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.5 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.3 to /tmp/stage1root/
[ebuild N ] virtual/editor-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.8 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.8.1::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.8 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180806T071331Z/.catalyst_lock'
Command exited with non-zero status 1
773.45user 192.44system 12:24.17elapsed 129%CPU (0avgtext+0avgdata 471808maxresident)k
0inputs+0outputs (822major+99765371minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180806T071331Z.c8Wht9/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-08-07 7:27 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-08-07 7:27 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Installing (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Emerging (20 of 20) sys-fs/udev-238::gentoo
>>> Installing (20 of 20) sys-fs/udev-238::gentoo
* Messages for package sys-apps/coreutils-8.29-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.32-r4:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - INOTIFY_USER
* You're on your own to make sure they are set if needed.
* Messages for package sys-fs/udev-238:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - BLK_DEV_BSG
* - DEVTMPFS
* - IDE
* - INOTIFY_USER
* - SYSFS_DEPRECATED
* - SYSFS_DEPRECATED_V2
* - SIGNALFD
* - EPOLL
* - FHANDLE
* - NET
* - FW_LOADER_USER_HELPER
* - UNIX
* You're on your own to make sure they are set if needed.
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* https://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot virtual/shadow sys-devel/binutils app-shells/bash:0 virtual/editor app-arch/tar sys-apps/baselayout sys-devel/autoconf sys-apps/portage sys-apps/grep sys-apps/file sys-apps/which sys-devel/gnuconfig sys-apps/makedev sys-devel/bison app-arch/bzip2 sys-devel/gcc sys-apps/gawk net-misc/wget sys-devel/gettext sys-devel/automake sys-devel/make sys-devel/libtool virtual/os-headers app-arch/gzip sys-apps/findutils net-misc/rsync sys-apps/coreutils virtual/pkgconfig sys-apps/sed sys-apps/diffutils sys-apps/less app-arch/xz-utils sys-apps/net-tools virtual/libc sys-devel/flex sys-devel/patch
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r9 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.30 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.5 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2018d to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.4 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.2.1-r3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.6-r1 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.5 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.5 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.33-r4 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.6 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.30-r2 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.12 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.64 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.26-r7 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0_p3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4_p12 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.8 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.6.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.40-r1 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] virtual/editor-0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-7.3.0-r3 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.5 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.3 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.8.1::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.8 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180807T071337Z/.catalyst_lock'
Command exited with non-zero status 1
774.36user 196.00system 12:29.06elapsed 129%CPU (0avgtext+0avgdata 472336maxresident)k
0inputs+0outputs (852major+99470090minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180807T071337Z.F9rrZN/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-08-08 7:28 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-08-08 7:28 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Installing (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Emerging (20 of 20) sys-fs/udev-238::gentoo
>>> Installing (20 of 20) sys-fs/udev-238::gentoo
* Messages for package sys-apps/coreutils-8.29-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.32-r4:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - INOTIFY_USER
* You're on your own to make sure they are set if needed.
* Messages for package sys-fs/udev-238:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - BLK_DEV_BSG
* - DEVTMPFS
* - IDE
* - INOTIFY_USER
* - SYSFS_DEPRECATED
* - SYSFS_DEPRECATED_V2
* - SIGNALFD
* - EPOLL
* - FHANDLE
* - NET
* - FW_LOADER_USER_HELPER
* - UNIX
* You're on your own to make sure they are set if needed.
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* https://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-arch/bzip2 virtual/pkgconfig sys-apps/which sys-devel/binutils sys-devel/gnuconfig sys-devel/autoconf sys-devel/libtool sys-apps/file virtual/editor sys-devel/bison sys-apps/baselayout sys-devel/gettext net-misc/wget app-arch/gzip app-shells/bash:0 sys-apps/makedev net-misc/rsync sys-apps/diffutils sys-apps/net-tools sys-apps/less sys-apps/findutils sys-devel/flex virtual/shadow sys-devel/automake virtual/libc sys-apps/sed sys-apps/portage app-arch/xz-utils sys-apps/coreutils sys-apps/grep sys-devel/gcc app-arch/tar virtual/os-headers sys-devel/make sys-devel/patch sys-apps/gawk
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r9 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.5 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.30 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2018d to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.2.1-r3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.6-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.4 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.5 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.5 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.33-r4 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.6 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.30-r2 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.12 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.64 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.26-r7 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0_p3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4_p12 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.6.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.40-r1 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] virtual/editor-0-r1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.5 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.3 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-7.3.0-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.8 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.8.1::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.8 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180808T071327Z/.catalyst_lock'
Command exited with non-zero status 1
778.76user 197.10system 13:33.07elapsed 120%CPU (0avgtext+0avgdata 472896maxresident)k
0inputs+0outputs (723major+99431534minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180808T071327Z.TwjEhb/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-08-09 7:54 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-08-09 7:54 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Installing (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Emerging (20 of 20) sys-fs/udev-238::gentoo
>>> Installing (20 of 20) sys-fs/udev-238::gentoo
* Messages for package sys-apps/coreutils-8.29-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.32-r4:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - INOTIFY_USER
* You're on your own to make sure they are set if needed.
* Messages for package sys-fs/udev-238:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - BLK_DEV_BSG
* - DEVTMPFS
* - IDE
* - INOTIFY_USER
* - SYSFS_DEPRECATED
* - SYSFS_DEPRECATED_V2
* - SIGNALFD
* - EPOLL
* - FHANDLE
* - NET
* - FW_LOADER_USER_HELPER
* - UNIX
* You're on your own to make sure they are set if needed.
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* https://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/portage virtual/os-headers sys-devel/binutils sys-apps/sed sys-devel/flex sys-apps/diffutils sys-apps/findutils sys-devel/make app-arch/tar sys-devel/gnuconfig virtual/shadow sys-devel/patch sys-apps/coreutils sys-apps/less app-arch/xz-utils sys-apps/which net-misc/rsync sys-devel/automake app-shells/bash:0 sys-apps/net-tools app-arch/gzip app-arch/bzip2 sys-devel/libtool net-misc/wget sys-apps/grep sys-devel/gettext sys-devel/bison sys-apps/file virtual/editor virtual/libc sys-apps/makedev sys-devel/gcc sys-apps/gawk sys-devel/autoconf sys-apps/baselayout virtual/pkgconfig
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r9 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.5 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.30 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2018d to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.2.1-r3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.6-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.4 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.5 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.33-r4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.6 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.30-r2 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.12 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.64 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.26-r7 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0_p3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4_p12 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.8 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.6.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.40-r1 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.3 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.5 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] virtual/editor-0-r1 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-7.3.0-r3 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.8.1::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.8 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180809T073959Z/.catalyst_lock'
Command exited with non-zero status 1
775.06user 197.66system 12:29.57elapsed 129%CPU (0avgtext+0avgdata 472544maxresident)k
0inputs+0outputs (815major+99503599minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180809T073959Z.rpAUtC/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-08-10 7:27 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-08-10 7:27 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Installing (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Emerging (20 of 20) sys-fs/udev-238::gentoo
>>> Installing (20 of 20) sys-fs/udev-238::gentoo
* Messages for package sys-apps/coreutils-8.29-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.32-r4:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - INOTIFY_USER
* You're on your own to make sure they are set if needed.
* Messages for package sys-fs/udev-238:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - BLK_DEV_BSG
* - DEVTMPFS
* - IDE
* - INOTIFY_USER
* - SYSFS_DEPRECATED
* - SYSFS_DEPRECATED_V2
* - SIGNALFD
* - EPOLL
* - FHANDLE
* - NET
* - FW_LOADER_USER_HELPER
* - UNIX
* You're on your own to make sure they are set if needed.
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* https://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/libtool virtual/pkgconfig sys-apps/findutils sys-apps/coreutils app-arch/tar sys-devel/flex sys-devel/patch sys-devel/binutils app-arch/xz-utils sys-apps/sed sys-apps/makedev sys-apps/diffutils app-arch/bzip2 sys-apps/file sys-apps/grep virtual/os-headers net-misc/wget sys-apps/less sys-devel/gcc app-shells/bash:0 app-arch/gzip sys-devel/autoconf sys-devel/automake virtual/editor sys-apps/baselayout sys-apps/gawk net-misc/rsync sys-apps/portage sys-devel/bison sys-devel/make virtual/shadow sys-devel/gettext sys-apps/which sys-devel/gnuconfig virtual/libc sys-apps/net-tools
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r9 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.30 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.5 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2018d to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.6-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.4 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.2.1-r3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.5 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.5 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.33-r4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.6 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.30-r2 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.12 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.64 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.26-r7 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0_p3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4_p12 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.8 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.6.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.40-r1 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.5 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-7.3.0-r3 to /tmp/stage1root/
[ebuild N ] virtual/editor-0-r1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.3 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.8.1::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.8 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180810T071322Z/.catalyst_lock'
Command exited with non-zero status 1
772.44user 189.61system 12:23.77elapsed 129%CPU (0avgtext+0avgdata 472304maxresident)k
0inputs+0outputs (811major+99488213minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180810T071322Z.d5m0yd/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-08-11 7:27 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-08-11 7:27 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Installing (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Emerging (20 of 20) sys-fs/udev-238::gentoo
>>> Installing (20 of 20) sys-fs/udev-238::gentoo
* Messages for package sys-apps/coreutils-8.29-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.32-r4:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - INOTIFY_USER
* You're on your own to make sure they are set if needed.
* Messages for package sys-fs/udev-238:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - BLK_DEV_BSG
* - DEVTMPFS
* - IDE
* - INOTIFY_USER
* - SYSFS_DEPRECATED
* - SYSFS_DEPRECATED_V2
* - SIGNALFD
* - EPOLL
* - FHANDLE
* - NET
* - FW_LOADER_USER_HELPER
* - UNIX
* You're on your own to make sure they are set if needed.
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* https://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot virtual/libc sys-devel/gettext sys-devel/binutils sys-apps/gawk net-misc/wget sys-apps/which sys-apps/findutils sys-devel/make virtual/pkgconfig net-misc/rsync sys-apps/baselayout sys-apps/less app-shells/bash:0 app-arch/xz-utils sys-devel/automake virtual/shadow sys-apps/sed app-arch/gzip sys-apps/grep sys-apps/portage app-arch/bzip2 sys-devel/patch sys-apps/coreutils virtual/os-headers sys-devel/bison sys-apps/diffutils virtual/editor app-arch/tar sys-devel/gnuconfig sys-devel/autoconf sys-devel/gcc sys-apps/net-tools sys-apps/file sys-devel/flex sys-apps/makedev sys-devel/libtool
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r9 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.5 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.30 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2018d to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.4 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.2.1-r3 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.6-r1 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.5 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.33-r4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.6 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.30-r2 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.12 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.64 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.26-r7 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0_p3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4_p12 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.6.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.40-r1 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.5 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] virtual/editor-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-7.3.0-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.8 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.8.1::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.8 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180811T071304Z/.catalyst_lock'
Command exited with non-zero status 1
775.81user 194.80system 12:32.05elapsed 129%CPU (0avgtext+0avgdata 472848maxresident)k
0inputs+0outputs (718major+99482579minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180811T071304Z.QCsAYo/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-08-12 7:27 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-08-12 7:27 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Installing (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Emerging (20 of 20) sys-fs/udev-238::gentoo
>>> Installing (20 of 20) sys-fs/udev-238::gentoo
* Messages for package sys-apps/coreutils-8.29-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.32-r4:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - INOTIFY_USER
* You're on your own to make sure they are set if needed.
* Messages for package sys-fs/udev-238:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - BLK_DEV_BSG
* - DEVTMPFS
* - IDE
* - INOTIFY_USER
* - SYSFS_DEPRECATED
* - SYSFS_DEPRECATED_V2
* - SIGNALFD
* - EPOLL
* - FHANDLE
* - NET
* - FW_LOADER_USER_HELPER
* - UNIX
* You're on your own to make sure they are set if needed.
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* https://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/file app-shells/bash:0 sys-devel/gnuconfig sys-devel/libtool sys-apps/which sys-devel/gettext sys-devel/bison app-arch/gzip net-misc/rsync sys-devel/automake sys-apps/less virtual/pkgconfig sys-apps/findutils virtual/editor sys-devel/binutils sys-devel/gcc sys-apps/diffutils app-arch/tar app-arch/bzip2 net-misc/wget virtual/os-headers sys-apps/net-tools sys-apps/sed sys-devel/flex sys-apps/gawk sys-apps/baselayout sys-apps/grep sys-apps/portage sys-devel/make virtual/shadow sys-devel/autoconf sys-devel/patch sys-apps/makedev app-arch/xz-utils virtual/libc sys-apps/coreutils
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r9 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.30 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.5 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2018d to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.4 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.2.1-r3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.6-r1 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.5 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.33-r4 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.6 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.30-r2 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.12 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.64 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.26-r7 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0_p3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4_p12 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.6.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.40-r1 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.3 to /tmp/stage1root/
[ebuild N ] virtual/editor-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-7.3.0-r3 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.5 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.8 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.8.1::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.8 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180812T071251Z/.catalyst_lock'
Command exited with non-zero status 1
776.45user 198.07system 12:50.45elapsed 126%CPU (0avgtext+0avgdata 472288maxresident)k
0inputs+0outputs (794major+99508452minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180812T071251Z.yIMSCc/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-08-13 7:27 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-08-13 7:27 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Installing (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Emerging (20 of 20) sys-fs/udev-238::gentoo
>>> Installing (20 of 20) sys-fs/udev-238::gentoo
* Messages for package sys-apps/coreutils-8.29-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.32-r4:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - INOTIFY_USER
* You're on your own to make sure they are set if needed.
* Messages for package sys-fs/udev-238:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - BLK_DEV_BSG
* - DEVTMPFS
* - IDE
* - INOTIFY_USER
* - SYSFS_DEPRECATED
* - SYSFS_DEPRECATED_V2
* - SIGNALFD
* - EPOLL
* - FHANDLE
* - NET
* - FW_LOADER_USER_HELPER
* - UNIX
* You're on your own to make sure they are set if needed.
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* https://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/libtool sys-devel/binutils sys-devel/gettext virtual/os-headers sys-apps/gawk net-misc/rsync sys-devel/gnuconfig app-arch/gzip app-arch/xz-utils virtual/editor sys-apps/makedev sys-devel/automake sys-devel/autoconf sys-devel/bison sys-apps/sed sys-apps/which sys-devel/make sys-apps/grep app-arch/bzip2 virtual/pkgconfig sys-devel/gcc sys-apps/coreutils sys-apps/net-tools virtual/shadow virtual/libc sys-apps/findutils sys-apps/diffutils sys-devel/patch sys-apps/baselayout net-misc/wget sys-apps/portage app-arch/tar app-shells/bash:0 sys-apps/file sys-apps/less sys-devel/flex
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r9 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.5 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.30 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2018d to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.4 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.2.1-r3 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.6-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.5 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.33-r4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.6 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.30-r2 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.12 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.64 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.26-r7 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0_p3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4_p12 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.6.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.40-r1 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.3 to /tmp/stage1root/
[ebuild N ] virtual/editor-0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-7.3.0-r3 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.5 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.8 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.8.1::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.8 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180813T071343Z/.catalyst_lock'
Command exited with non-zero status 1
775.64user 199.07system 12:32.16elapsed 129%CPU (0avgtext+0avgdata 472624maxresident)k
0inputs+0outputs (850major+99583547minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180813T071343Z.Qrm4gK/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-08-14 7:28 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-08-14 7:28 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Installing (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Emerging (20 of 20) sys-fs/udev-238::gentoo
>>> Installing (20 of 20) sys-fs/udev-238::gentoo
* Messages for package sys-apps/coreutils-8.29-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.32-r4:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - INOTIFY_USER
* You're on your own to make sure they are set if needed.
* Messages for package sys-fs/udev-238:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - BLK_DEV_BSG
* - DEVTMPFS
* - IDE
* - INOTIFY_USER
* - SYSFS_DEPRECATED
* - SYSFS_DEPRECATED_V2
* - SIGNALFD
* - EPOLL
* - FHANDLE
* - NET
* - FW_LOADER_USER_HELPER
* - UNIX
* You're on your own to make sure they are set if needed.
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* https://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/binutils virtual/shadow sys-devel/flex sys-apps/file sys-devel/gnuconfig sys-apps/which virtual/os-headers sys-devel/libtool sys-devel/patch sys-apps/diffutils sys-apps/less virtual/pkgconfig sys-apps/grep app-arch/gzip app-arch/xz-utils virtual/libc sys-devel/gcc sys-devel/bison sys-devel/make sys-apps/baselayout virtual/editor sys-apps/gawk net-misc/wget app-shells/bash:0 sys-apps/findutils sys-apps/net-tools app-arch/tar net-misc/rsync sys-devel/automake sys-apps/sed sys-devel/autoconf app-arch/bzip2 sys-apps/makedev sys-apps/coreutils sys-apps/portage sys-devel/gettext
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r9 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.30 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.5 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2018d to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.6-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.2.1-r3 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.4 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.5 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.33-r4 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.6 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.30-r2 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.12 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.64 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.26-r7 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0_p3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4_p12 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.8 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.6.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.40-r1 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-7.3.0-r3 to /tmp/stage1root/
[ebuild N ] virtual/editor-0-r1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.5 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.8.1::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.8 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180814T071332Z/.catalyst_lock'
Command exited with non-zero status 1
780.21user 201.00system 13:05.68elapsed 124%CPU (0avgtext+0avgdata 472384maxresident)k
0inputs+0outputs (847major+99649500minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180814T071332Z.Wvrz4q/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-08-15 7:27 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-08-15 7:27 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Installing (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Emerging (20 of 20) sys-fs/udev-238::gentoo
>>> Installing (20 of 20) sys-fs/udev-238::gentoo
* Messages for package sys-apps/coreutils-8.29-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.32-r4:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - INOTIFY_USER
* You're on your own to make sure they are set if needed.
* Messages for package sys-fs/udev-238:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - BLK_DEV_BSG
* - DEVTMPFS
* - IDE
* - INOTIFY_USER
* - SYSFS_DEPRECATED
* - SYSFS_DEPRECATED_V2
* - SIGNALFD
* - EPOLL
* - FHANDLE
* - NET
* - FW_LOADER_USER_HELPER
* - UNIX
* You're on your own to make sure they are set if needed.
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* https://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/patch sys-apps/findutils virtual/shadow sys-devel/gcc app-shells/bash:0 sys-apps/diffutils sys-apps/baselayout sys-apps/makedev app-arch/tar virtual/libc net-misc/wget app-arch/bzip2 sys-apps/grep sys-devel/autoconf virtual/pkgconfig sys-apps/portage sys-devel/gettext app-arch/xz-utils virtual/editor sys-devel/make sys-apps/file sys-apps/coreutils sys-apps/gawk sys-devel/bison net-misc/rsync sys-devel/binutils sys-apps/net-tools virtual/os-headers sys-devel/flex sys-apps/less sys-apps/sed sys-devel/libtool sys-devel/automake app-arch/gzip sys-devel/gnuconfig sys-apps/which
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r9 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.30 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.5 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2018d to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.6-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.2.1-r3 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.4 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.5 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.5 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.33-r4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.6 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.30-r2 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.12 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.64 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.26-r7 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0_p3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4_p12 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.8 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.6.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.40-r1 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-7.3.0-r3 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.5 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] virtual/editor-0-r1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.8.1::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.8 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180815T071334Z/.catalyst_lock'
Command exited with non-zero status 1
776.03user 195.30system 12:30.42elapsed 129%CPU (0avgtext+0avgdata 472320maxresident)k
0inputs+0outputs (853major+99547107minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180815T071334Z.bQbKaK/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2018-08-16 7:27 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2018-08-16 7:27 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Installing (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Emerging (20 of 20) sys-fs/udev-238::gentoo
>>> Installing (20 of 20) sys-fs/udev-238::gentoo
* Messages for package sys-apps/coreutils-8.29-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.32-r4:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - INOTIFY_USER
* You're on your own to make sure they are set if needed.
* Messages for package sys-fs/udev-238:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - BLK_DEV_BSG
* - DEVTMPFS
* - IDE
* - INOTIFY_USER
* - SYSFS_DEPRECATED
* - SYSFS_DEPRECATED_V2
* - SIGNALFD
* - EPOLL
* - FHANDLE
* - NET
* - FW_LOADER_USER_HELPER
* - UNIX
* You're on your own to make sure they are set if needed.
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* https://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/baselayout sys-devel/gettext sys-apps/portage sys-apps/which app-arch/tar net-misc/rsync sys-devel/patch sys-devel/gnuconfig sys-devel/libtool sys-devel/autoconf virtual/editor sys-apps/diffutils sys-apps/file sys-devel/binutils sys-apps/gawk app-arch/xz-utils sys-apps/coreutils sys-apps/less sys-devel/flex sys-devel/make app-arch/gzip app-arch/bzip2 app-shells/bash:0 virtual/pkgconfig sys-apps/makedev sys-apps/net-tools sys-devel/gcc net-misc/wget sys-apps/findutils sys-apps/grep virtual/libc sys-apps/sed sys-devel/automake virtual/os-headers virtual/shadow sys-devel/bison
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r9 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.30 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.5 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2018d to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.6-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.4 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.2.1-r3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.5 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.5 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.33-r4 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.6 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.30-r2 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.12 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.64 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.26-r7 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0_p3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4_p12 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.6.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.40-r1 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.3 to /tmp/stage1root/
[ebuild N ] virtual/editor-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-7.3.0-r3 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.5 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.8 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.8.1::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.8 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180816T071312Z/.catalyst_lock'
Command exited with non-zero status 1
779.02user 203.51system 12:38.93elapsed 129%CPU (0avgtext+0avgdata 472016maxresident)k
0inputs+0outputs (847major+99621872minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180816T071312Z.UWqAsx/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2019-06-03 7:14 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2019-06-03 7:14 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage1.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
!!! catalyst: Argument "compression_mode" not recognized.
Also: Argument "decompressor_search_order" not recognized.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/stage1_target.py", line 17, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 22, in __init__
generic_target.__init__(self,myspec,addlargs)
File "modules/generic_target.py", line 10, in __init__
addl_arg_parse(myspec,addlargs,self.required_values,self.valid_values)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 689, in addl_arg_parse
raise CatalystError, '
Also: '.join(messages)
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
Command exited with non-zero status 1
0.03user 0.00system 0:00.16elapsed 27%CPU (0avgtext+0avgdata 41440maxresident)k
0inputs+0outputs (26major+1837minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190603T071204Z.I49Fs7/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2019-10-02 7:14 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2019-10-02 7:14 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage1.spec
02 Oct 2019 03:13:24 EDT: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
02 Oct 2019 03:13:24 EDT: NOTICE : conf_values[options] = {'snapcache', 'kerncache', 'pkgcache', 'clear-autoresume', 'autoresume', 'seedcache', 'bindist'}
02 Oct 2019 03:13:24 EDT: NOTICE : Processing spec file: stage1.spec
02 Oct 2019 03:13:24 EDT: NOTICE : Using target: stage1
02 Oct 2019 03:13:24 EDT: NOTICE : Source file specification matching setting is: strict
02 Oct 2019 03:13:24 EDT: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
02 Oct 2019 03:13:25 EDT: NOTICE : Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.xz
02 Oct 2019 03:13:25 EDT: NOTICE : stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20191002T071210Z/tmp/stage1root
02 Oct 2019 03:13:25 EDT: NOTICE : Removing AutoResume Points ...
02 Oct 2019 03:13:25 EDT: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20191002T071210Z
02 Oct 2019 03:13:25 EDT: NOTICE : --- Running action sequence: unpack
02 Oct 2019 03:13:25 EDT: NOTICE : Referenced SEEDCACHE does not appear to be a directory, trying to untar...
02 Oct 2019 03:13:25 EDT: NOTICE : Resume: "seed source" unpack resume point is disabled
02 Oct 2019 03:13:25 EDT: NOTICE : Resume: Target chroot is invalid, cleaning up...
02 Oct 2019 03:13:25 EDT: NOTICE : Removing AutoResume Points ...
02 Oct 2019 03:13:25 EDT: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20191002T071210Z
02 Oct 2019 03:13:25 EDT: NOTICE : Clearing the chroot path ...
02 Oct 2019 03:13:25 EDT: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/stage1-s390-20191002T071210Z
02 Oct 2019 03:13:25 EDT: NOTICE : Starting auto from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.xz
02 Oct 2019 03:13:25 EDT: NOTICE : to /var/tmp/catalyst/tmp/default/stage1-s390-20191002T071210Z (this may take some time) ..
02 Oct 2019 03:13:36 EDT: NOTICE : --- Running action sequence: unpack_snapshot
02 Oct 2019 03:13:36 EDT: NOTICE : Unpacking portage tree (this can take a long time) ...
02 Oct 2019 03:13:47 EDT: NOTICE : --- Running action sequence: setup_confdir
02 Oct 2019 03:13:47 EDT: NOTICE : --- Running action sequence: portage_overlay
02 Oct 2019 03:13:47 EDT: NOTICE : --- Running action sequence: base_dirs
02 Oct 2019 03:13:47 EDT: NOTICE : --- Running action sequence: bind
02 Oct 2019 03:13:47 EDT: NOTICE : --- Running action sequence: chroot_setup
02 Oct 2019 03:13:47 EDT: NOTICE : Setting up chroot...
02 Oct 2019 03:13:47 EDT: WARNING : Overriding certain env variables may cause catastrophic failure.
02 Oct 2019 03:13:47 EDT: WARNING : If your build fails look here first as the possible problem.
02 Oct 2019 03:13:47 EDT: WARNING : Catalyst assumes you know what you are doing when setting these variables.
02 Oct 2019 03:13:47 EDT: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
02 Oct 2019 03:13:47 EDT: WARNING : You have been warned.
02 Oct 2019 03:13:47 EDT: NOTICE : Writing the stage make.conf to: /var/tmp/catalyst/tmp/default/stage1-s390-20191002T071210Z/etc/portage/make.conf
02 Oct 2019 03:13:47 EDT: NOTICE : STICKY-CONFIG is enabled
02 Oct 2019 03:13:47 EDT: NOTICE : --- Running action sequence: setup_environment
02 Oct 2019 03:13:47 EDT: NOTICE : --- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20191002T071210Z/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20191002T071210Z/tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20191002T071210Z/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
chroot /var/tmp/catalyst/tmp/default/stage1-s390-20191002T071210Z /tmp/stage1-chroot.sh
>>> Regenerating /etc/ld.so.cache...
Adding USE="${USE} build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-apps/portage-2.3.69
* Determining the location of the kernel source code
* Unable to find kernel sources at /usr/src/linux
* Please make sure that /usr/src/linux points at your running kernel,
* (or the kernel you wish to build against).
* Alternatively, set the KERNEL_DIR environment variable to the kernel sources location
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - IPC_NS
* - PID_NS
* - NET_NS
* You're on your own to make sure they are set if needed.
>>> Emerging (1 of 1) sys-apps/portage-2.3.69::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.69::gentoo
* Messages for package sys-apps/portage-2.3.69:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - IPC_NS
* - PID_NS
* - NET_NS
* You're on your own to make sure they are set if needed.
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world --jobs 2 --load-average 2
[ebuild U ] sys-libs/e2fsprogs-libs-1.45.4 [1.45.2]
[ebuild U ] dev-libs/libassuan-2.5.3 [2.5.1]
[ebuild N ] app-crypt/gpgme-1.13.1
[ebuild U ] sys-fs/e2fsprogs-1.45.4 [1.45.2]
[ebuild N ] app-crypt/libb2-0.98.1-r1
[ebuild U ] app-portage/portage-utils-0.80 [0.74]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-crypt/gpgme-1.13.1::gentoo
# required by app-portage/portage-utils-0.80::gentoo[-static,qmanifest]
# required by app-admin/perl-cleaner-2.27::gentoo
# required by dev-lang/perl-5.28.2-r1::gentoo
# required by virtual/perl-JSON-PP-2.970.10::gentoo
# required by virtual/perl-CPAN-Meta-2.150.10-r2::gentoo
# required by dev-perl/Module-Build-0.422.400::gentoo
# required by dev-perl/SGMLSpm-1.1-r1::gentoo
# required by app-text/po4a-0.47-r1::gentoo
# required by sys-apps/man-db-2.7.6.1-r2::gentoo[nls]
# required by virtual/man-0-r2::gentoo
# required by @system
# required by @world (argument)
=dev-libs/libassuan-2.5.3 ~s390
# required by app-portage/portage-utils-0.80::gentoo[-static,qmanifest]
# required by app-admin/perl-cleaner-2.27::gentoo
# required by dev-lang/perl-5.28.2-r1::gentoo
# required by virtual/perl-JSON-PP-2.970.10::gentoo
# required by virtual/perl-CPAN-Meta-2.150.10-r2::gentoo
# required by dev-perl/Module-Build-0.422.400::gentoo
# required by dev-perl/SGMLSpm-1.1-r1::gentoo
# required by app-text/po4a-0.47-r1::gentoo
# required by sys-apps/man-db-2.7.6.1-r2::gentoo[nls]
# required by virtual/man-0-r2::gentoo
# required by @system
# required by @world (argument)
=app-crypt/gpgme-1.13.1 **
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
02 Oct 2019 03:14:19 EDT: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
02 Oct 2019 03:14:20 EDT: ERROR : CatalystError: Stage build aborting due to error.
02 Oct 2019 03:14:20 EDT: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1360, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
02 Oct 2019 03:14:20 EDT: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
44.26user 8.68system 0:56.68elapsed 93%CPU (0avgtext+0avgdata 492640maxresident)k
0inputs+0outputs (364major+2286241minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191002T071210Z.x49hdN/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2019-10-03 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2019-10-03 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage1.spec
03 Oct 2019 03:14:57 EDT: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
03 Oct 2019 03:14:57 EDT: NOTICE : conf_values[options] = {'clear-autoresume', 'snapcache', 'autoresume', 'pkgcache', 'seedcache', 'kerncache', 'bindist'}
03 Oct 2019 03:14:57 EDT: NOTICE : Processing spec file: stage1.spec
03 Oct 2019 03:14:57 EDT: NOTICE : Using target: stage1
03 Oct 2019 03:14:57 EDT: NOTICE : Source file specification matching setting is: strict
03 Oct 2019 03:14:57 EDT: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
03 Oct 2019 03:14:58 EDT: NOTICE : Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.xz
03 Oct 2019 03:14:58 EDT: NOTICE : stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20191003T071357Z/tmp/stage1root
03 Oct 2019 03:14:59 EDT: NOTICE : Removing AutoResume Points ...
03 Oct 2019 03:14:59 EDT: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20191003T071357Z
03 Oct 2019 03:14:59 EDT: NOTICE : --- Running action sequence: unpack
03 Oct 2019 03:14:59 EDT: NOTICE : Referenced SEEDCACHE does not appear to be a directory, trying to untar...
03 Oct 2019 03:14:59 EDT: NOTICE : Resume: "seed source" unpack resume point is disabled
03 Oct 2019 03:14:59 EDT: NOTICE : Resume: Target chroot is invalid, cleaning up...
03 Oct 2019 03:14:59 EDT: NOTICE : Removing AutoResume Points ...
03 Oct 2019 03:14:59 EDT: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20191003T071357Z
03 Oct 2019 03:14:59 EDT: NOTICE : Clearing the chroot path ...
03 Oct 2019 03:14:59 EDT: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/stage1-s390-20191003T071357Z
03 Oct 2019 03:14:59 EDT: NOTICE : Starting auto from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.xz
03 Oct 2019 03:14:59 EDT: NOTICE : to /var/tmp/catalyst/tmp/default/stage1-s390-20191003T071357Z (this may take some time) ..
03 Oct 2019 03:15:09 EDT: NOTICE : --- Running action sequence: unpack_snapshot
03 Oct 2019 03:15:09 EDT: NOTICE : Unpacking portage tree (this can take a long time) ...
03 Oct 2019 03:15:20 EDT: NOTICE : --- Running action sequence: setup_confdir
03 Oct 2019 03:15:20 EDT: NOTICE : --- Running action sequence: portage_overlay
03 Oct 2019 03:15:20 EDT: NOTICE : --- Running action sequence: base_dirs
03 Oct 2019 03:15:20 EDT: NOTICE : --- Running action sequence: bind
03 Oct 2019 03:15:20 EDT: NOTICE : --- Running action sequence: chroot_setup
03 Oct 2019 03:15:20 EDT: NOTICE : Setting up chroot...
03 Oct 2019 03:15:20 EDT: WARNING : Overriding certain env variables may cause catastrophic failure.
03 Oct 2019 03:15:20 EDT: WARNING : If your build fails look here first as the possible problem.
03 Oct 2019 03:15:20 EDT: WARNING : Catalyst assumes you know what you are doing when setting these variables.
03 Oct 2019 03:15:20 EDT: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
03 Oct 2019 03:15:20 EDT: WARNING : You have been warned.
03 Oct 2019 03:15:20 EDT: NOTICE : Writing the stage make.conf to: /var/tmp/catalyst/tmp/default/stage1-s390-20191003T071357Z/etc/portage/make.conf
03 Oct 2019 03:15:20 EDT: NOTICE : STICKY-CONFIG is enabled
03 Oct 2019 03:15:20 EDT: NOTICE : --- Running action sequence: setup_environment
03 Oct 2019 03:15:20 EDT: NOTICE : --- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20191003T071357Z/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20191003T071357Z/tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20191003T071357Z/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
chroot /var/tmp/catalyst/tmp/default/stage1-s390-20191003T071357Z /tmp/stage1-chroot.sh
>>> Regenerating /etc/ld.so.cache...
Adding USE="${USE} build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-apps/portage-2.3.69
* Determining the location of the kernel source code
* Unable to find kernel sources at /usr/src/linux
* Please make sure that /usr/src/linux points at your running kernel,
* (or the kernel you wish to build against).
* Alternatively, set the KERNEL_DIR environment variable to the kernel sources location
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - IPC_NS
* - PID_NS
* - NET_NS
* You're on your own to make sure they are set if needed.
>>> Emerging (1 of 1) sys-apps/portage-2.3.69::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.69::gentoo
* Messages for package sys-apps/portage-2.3.69:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - IPC_NS
* - PID_NS
* - NET_NS
* You're on your own to make sure they are set if needed.
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world --jobs 2 --load-average 2
[ebuild U ] sys-libs/e2fsprogs-libs-1.45.4 [1.45.2]
[ebuild U ] dev-libs/libassuan-2.5.3 [2.5.1]
[ebuild N ] app-crypt/gpgme-1.13.1
[ebuild U ] sys-fs/e2fsprogs-1.45.4 [1.45.2]
[ebuild N ] app-crypt/libb2-0.98.1-r1
[ebuild U ] app-portage/portage-utils-0.80 [0.74]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-portage/portage-utils-0.80::gentoo[-static,qmanifest]
# required by app-admin/perl-cleaner-2.27::gentoo
# required by dev-lang/perl-5.28.2-r1::gentoo
# required by dev-perl/XML-Parser-2.440.0::gentoo
# required by dev-util/intltool-0.51.0-r2::gentoo
# required by sys-fs/eudev-3.2.5::gentoo
# required by virtual/udev-217::gentoo
# required by sys-apps/hwids-20190316::gentoo[udev]
=app-crypt/gpgme-1.13.1 **
# required by app-crypt/gpgme-1.13.1::gentoo
# required by app-portage/portage-utils-0.80::gentoo[-static,qmanifest]
# required by app-admin/perl-cleaner-2.27::gentoo
# required by dev-lang/perl-5.28.2-r1::gentoo
# required by dev-perl/XML-Parser-2.440.0::gentoo
# required by dev-util/intltool-0.51.0-r2::gentoo
# required by sys-fs/eudev-3.2.5::gentoo
# required by virtual/udev-217::gentoo
# required by sys-apps/hwids-20190316::gentoo[udev]
=dev-libs/libassuan-2.5.3 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
03 Oct 2019 03:15:52 EDT: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
03 Oct 2019 03:15:53 EDT: ERROR : CatalystError: Stage build aborting due to error.
03 Oct 2019 03:15:53 EDT: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1360, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
03 Oct 2019 03:15:53 EDT: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
44.36user 8.72system 0:55.76elapsed 95%CPU (0avgtext+0avgdata 492768maxresident)k
0inputs+0outputs (322major+2291882minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191003T071357Z.mWUSjM/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2019-10-04 7:20 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2019-10-04 7:20 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage1.spec
04 Oct 2019 03:18:51 EDT: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
04 Oct 2019 03:18:51 EDT: NOTICE : conf_values[options] = {'kerncache', 'bindist', 'autoresume', 'pkgcache', 'snapcache', 'clear-autoresume', 'seedcache'}
04 Oct 2019 03:18:51 EDT: NOTICE : Processing spec file: stage1.spec
04 Oct 2019 03:18:52 EDT: NOTICE : Using target: stage1
04 Oct 2019 03:18:52 EDT: NOTICE : Source file specification matching setting is: strict
04 Oct 2019 03:18:52 EDT: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
04 Oct 2019 03:18:54 EDT: NOTICE : Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.xz
04 Oct 2019 03:18:54 EDT: NOTICE : stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20191004T071614Z/tmp/stage1root
04 Oct 2019 03:18:54 EDT: NOTICE : Removing AutoResume Points ...
04 Oct 2019 03:18:54 EDT: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20191004T071614Z
04 Oct 2019 03:18:54 EDT: NOTICE : --- Running action sequence: unpack
04 Oct 2019 03:18:54 EDT: NOTICE : Referenced SEEDCACHE does not appear to be a directory, trying to untar...
04 Oct 2019 03:18:54 EDT: NOTICE : Resume: "seed source" unpack resume point is disabled
04 Oct 2019 03:18:54 EDT: NOTICE : Resume: Target chroot is invalid, cleaning up...
04 Oct 2019 03:18:54 EDT: NOTICE : Removing AutoResume Points ...
04 Oct 2019 03:18:54 EDT: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20191004T071614Z
04 Oct 2019 03:18:54 EDT: NOTICE : Clearing the chroot path ...
04 Oct 2019 03:18:54 EDT: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/stage1-s390-20191004T071614Z
04 Oct 2019 03:18:54 EDT: NOTICE : Starting auto from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.xz
04 Oct 2019 03:18:54 EDT: NOTICE : to /var/tmp/catalyst/tmp/default/stage1-s390-20191004T071614Z (this may take some time) ..
04 Oct 2019 03:19:07 EDT: NOTICE : --- Running action sequence: unpack_snapshot
04 Oct 2019 03:19:07 EDT: NOTICE : Unpacking portage tree (this can take a long time) ...
04 Oct 2019 03:19:28 EDT: NOTICE : --- Running action sequence: setup_confdir
04 Oct 2019 03:19:28 EDT: NOTICE : --- Running action sequence: portage_overlay
04 Oct 2019 03:19:28 EDT: NOTICE : --- Running action sequence: base_dirs
04 Oct 2019 03:19:28 EDT: NOTICE : --- Running action sequence: bind
04 Oct 2019 03:19:28 EDT: NOTICE : --- Running action sequence: chroot_setup
04 Oct 2019 03:19:29 EDT: NOTICE : Setting up chroot...
04 Oct 2019 03:19:29 EDT: WARNING : Overriding certain env variables may cause catastrophic failure.
04 Oct 2019 03:19:29 EDT: WARNING : If your build fails look here first as the possible problem.
04 Oct 2019 03:19:29 EDT: WARNING : Catalyst assumes you know what you are doing when setting these variables.
04 Oct 2019 03:19:29 EDT: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
04 Oct 2019 03:19:29 EDT: WARNING : You have been warned.
04 Oct 2019 03:19:29 EDT: NOTICE : Writing the stage make.conf to: /var/tmp/catalyst/tmp/default/stage1-s390-20191004T071614Z/etc/portage/make.conf
04 Oct 2019 03:19:29 EDT: NOTICE : STICKY-CONFIG is enabled
04 Oct 2019 03:19:29 EDT: NOTICE : --- Running action sequence: setup_environment
04 Oct 2019 03:19:29 EDT: NOTICE : --- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20191004T071614Z/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20191004T071614Z/tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20191004T071614Z/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
chroot /var/tmp/catalyst/tmp/default/stage1-s390-20191004T071614Z /tmp/stage1-chroot.sh
>>> Regenerating /etc/ld.so.cache...
Adding USE="${USE} build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-apps/portage-2.3.76
* Determining the location of the kernel source code
* Unable to find kernel sources at /usr/src/linux
* Please make sure that /usr/src/linux points at your running kernel,
* (or the kernel you wish to build against).
* Alternatively, set the KERNEL_DIR environment variable to the kernel sources location
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - IPC_NS
* - PID_NS
* - NET_NS
* You're on your own to make sure they are set if needed.
>>> Emerging (1 of 1) sys-apps/portage-2.3.76::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.76::gentoo
* Messages for package sys-apps/portage-2.3.76:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - IPC_NS
* - PID_NS
* - NET_NS
* You're on your own to make sure they are set if needed.
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world --jobs 2 --load-average 2
[ebuild U ] dev-libs/libffi-3.3_rc0 [3.2.1]
[ebuild U ] virtual/libffi-3.3_rc0 [3.0.13-r1]
[ebuild U ] sys-libs/e2fsprogs-libs-1.45.4 [1.45.2]
[ebuild N ] dev-libs/libbsd-0.9.1
[ebuild U ] dev-libs/libassuan-2.5.3 [2.5.1]
[ebuild U ] sys-apps/iproute2-5.2.0-r1 [4.19.0-r1]
[ebuild N ] app-crypt/gpgme-1.13.1
[ebuild U ] sys-fs/e2fsprogs-1.45.4 [1.45.2]
[ebuild U ] dev-lang/python-3.6.9 [3.6.5]
[ebuild U ] dev-lang/python-2.7.16 [2.7.15]
[ebuild N ] app-crypt/libb2-0.98.1-r1
[ebuild U ] app-portage/portage-utils-0.80 [0.74]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-portage/portage-utils-0.80::gentoo[-static,qmanifest]
# required by app-admin/perl-cleaner-2.27::gentoo
# required by dev-lang/perl-5.28.2-r1::gentoo
# required by virtual/perl-JSON-PP-2.970.10::gentoo
# required by virtual/perl-CPAN-Meta-2.150.10-r2::gentoo
# required by dev-perl/Module-Build-0.422.400::gentoo
# required by dev-perl/SGMLSpm-1.1-r1::gentoo
# required by app-text/po4a-0.47-r1::gentoo
# required by sys-apps/man-db-2.7.6.1-r2::gentoo[nls]
# required by virtual/man-0-r2::gentoo
# required by @system
# required by @world (argument)
=app-crypt/gpgme-1.13.1 **
# required by app-crypt/gpgme-1.13.1::gentoo
# required by app-portage/portage-utils-0.80::gentoo[-static,qmanifest]
# required by app-admin/perl-cleaner-2.27::gentoo
# required by dev-lang/perl-5.28.2-r1::gentoo
# required by virtual/perl-JSON-PP-2.970.10::gentoo
# required by virtual/perl-CPAN-Meta-2.150.10-r2::gentoo
# required by dev-perl/Module-Build-0.422.400::gentoo
# required by dev-perl/SGMLSpm-1.1-r1::gentoo
# required by app-text/po4a-0.47-r1::gentoo
# required by sys-apps/man-db-2.7.6.1-r2::gentoo[nls]
# required by virtual/man-0-r2::gentoo
# required by @system
# required by @world (argument)
=dev-libs/libassuan-2.5.3 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
04 Oct 2019 03:20:11 EDT: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
04 Oct 2019 03:20:11 EDT: ERROR : CatalystError: Stage build aborting due to error.
04 Oct 2019 03:20:11 EDT: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1360, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
04 Oct 2019 03:20:11 EDT: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
44.05user 8.94system 1:20.17elapsed 66%CPU (0avgtext+0avgdata 492672maxresident)k
0inputs+0outputs (326major+2320212minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191004T071614Z.5ih6xM/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2019-10-26 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2019-10-26 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage1.spec
26 Oct 2019 03:13:52 EDT: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
26 Oct 2019 03:13:52 EDT: NOTICE : conf_values[options] = {'snapcache', 'kerncache', 'clear-autoresume', 'bindist', 'autoresume', 'pkgcache'}
26 Oct 2019 03:13:52 EDT: NOTICE : Processing spec file: stage1.spec
26 Oct 2019 03:13:52 EDT: NOTICE : Using target: stage1
26 Oct 2019 03:13:52 EDT: NOTICE : Source file specification matching setting is: strict
26 Oct 2019 03:13:52 EDT: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
26 Oct 2019 03:13:55 EDT: NOTICE : Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.xz
26 Oct 2019 03:13:55 EDT: NOTICE : stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20191026T071008Z/tmp/stage1root
26 Oct 2019 03:13:55 EDT: NOTICE : Removing AutoResume Points ...
26 Oct 2019 03:13:55 EDT: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20191026T071008Z
26 Oct 2019 03:13:55 EDT: NOTICE : --- Running action sequence: unpack
26 Oct 2019 03:13:55 EDT: NOTICE : Resume: "seed source" unpack resume point is disabled
26 Oct 2019 03:13:55 EDT: NOTICE : Resume: Target chroot is invalid, cleaning up...
26 Oct 2019 03:13:55 EDT: NOTICE : Removing AutoResume Points ...
26 Oct 2019 03:13:55 EDT: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20191026T071008Z
26 Oct 2019 03:13:55 EDT: NOTICE : Clearing the chroot path ...
26 Oct 2019 03:13:55 EDT: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/stage1-s390-20191026T071008Z
26 Oct 2019 03:13:55 EDT: NOTICE : Starting auto from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.xz
26 Oct 2019 03:13:55 EDT: NOTICE : to /var/tmp/catalyst/tmp/default/stage1-s390-20191026T071008Z (this may take some time) ..
26 Oct 2019 03:14:15 EDT: NOTICE : --- Running action sequence: unpack_snapshot
26 Oct 2019 03:14:15 EDT: NOTICE : Unpacking portage tree (this can take a long time) ...
26 Oct 2019 03:14:43 EDT: NOTICE : --- Running action sequence: setup_confdir
26 Oct 2019 03:14:43 EDT: NOTICE : --- Running action sequence: portage_overlay
26 Oct 2019 03:14:43 EDT: NOTICE : --- Running action sequence: base_dirs
26 Oct 2019 03:14:43 EDT: NOTICE : --- Running action sequence: bind
26 Oct 2019 03:14:43 EDT: NOTICE : --- Running action sequence: chroot_setup
26 Oct 2019 03:14:44 EDT: NOTICE : Setting up chroot...
26 Oct 2019 03:14:44 EDT: WARNING : Overriding certain env variables may cause catastrophic failure.
26 Oct 2019 03:14:44 EDT: WARNING : If your build fails look here first as the possible problem.
26 Oct 2019 03:14:44 EDT: WARNING : Catalyst assumes you know what you are doing when setting these variables.
26 Oct 2019 03:14:44 EDT: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
26 Oct 2019 03:14:44 EDT: WARNING : You have been warned.
26 Oct 2019 03:14:44 EDT: NOTICE : Writing the stage make.conf to: /var/tmp/catalyst/tmp/default/stage1-s390-20191026T071008Z/etc/portage/make.conf
26 Oct 2019 03:14:44 EDT: NOTICE : STICKY-CONFIG is enabled
26 Oct 2019 03:14:44 EDT: NOTICE : --- Running action sequence: setup_environment
26 Oct 2019 03:14:44 EDT: NOTICE : --- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20191026T071008Z/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20191026T071008Z/tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20191026T071008Z/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
chroot /var/tmp/catalyst/tmp/default/stage1-s390-20191026T071008Z /tmp/stage1-chroot.sh
>>> Regenerating /etc/ld.so.cache...
Adding USE="${USE} build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-apps/portage-2.3.76
* Determining the location of the kernel source code
* Unable to find kernel sources at /usr/src/linux
* Please make sure that /usr/src/linux points at your running kernel,
* (or the kernel you wish to build against).
* Alternatively, set the KERNEL_DIR environment variable to the kernel sources location
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - IPC_NS
* - PID_NS
* - NET_NS
* You're on your own to make sure they are set if needed.
>>> Emerging (1 of 1) sys-apps/portage-2.3.76::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.76::gentoo
* Messages for package sys-apps/portage-2.3.76:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - IPC_NS
* - PID_NS
* - NET_NS
* You're on your own to make sure they are set if needed.
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world --jobs 2 --load-average 2
[ebuild U ] sys-libs/timezone-data-2019c [2019b-r1]
[ebuild N ] virtual/perl-Carp-1.500.0-r1
[ebuild N ] virtual/perl-IO-1.390.0
[ebuild N ] virtual/perl-Exporter-5.730.0-r1
[ebuild N ] dev-perl/Class-Inspector-1.320.0
[ebuild N ] dev-perl/File-ShareDir-Install-0.110.0
[ebuild N ] dev-perl/File-ShareDir-1.104.0
[ebuild U ] dev-perl/libintl-perl-1.310.0 [1.280.0]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by dev-perl/File-ShareDir-1.104.0::gentoo
# required by dev-perl/libintl-perl-1.310.0::gentoo[-minimal]
# required by app-text/texi2html-5.0-r1::gentoo
# required by dev-util/indent-2.2.11-r1::gentoo
# required by sys-apps/s390-tools-2.4.0-r1::gentoo
# required by @system
# required by @world (argument)
=dev-perl/File-ShareDir-Install-0.110.0 ~s390
# required by dev-perl/File-ShareDir-1.104.0::gentoo
# required by dev-perl/libintl-perl-1.310.0::gentoo[-minimal]
# required by app-text/texi2html-5.0-r1::gentoo
# required by dev-util/indent-2.2.11-r1::gentoo
# required by sys-apps/s390-tools-2.4.0-r1::gentoo
# required by @system
# required by @world (argument)
=dev-perl/Class-Inspector-1.320.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
26 Oct 2019 03:15:38 EDT: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
26 Oct 2019 03:15:39 EDT: ERROR : CatalystError: Stage build aborting due to error.
26 Oct 2019 03:15:39 EDT: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1360, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
26 Oct 2019 03:15:39 EDT: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
44.97user 9.15system 1:47.84elapsed 50%CPU (0avgtext+0avgdata 498992maxresident)k
0inputs+0outputs (362major+2331245minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191026T071008Z.1jf4v3/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2019-10-27 7:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2019-10-27 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage1.spec
27 Oct 2019 03:13:46 EDT: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
27 Oct 2019 03:13:46 EDT: NOTICE : conf_values[options] = {'autoresume', 'bindist', 'kerncache', 'snapcache', 'pkgcache', 'clear-autoresume'}
27 Oct 2019 03:13:46 EDT: NOTICE : Processing spec file: stage1.spec
27 Oct 2019 03:13:47 EDT: NOTICE : Using target: stage1
27 Oct 2019 03:13:47 EDT: NOTICE : Source file specification matching setting is: strict
27 Oct 2019 03:13:47 EDT: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
27 Oct 2019 03:13:50 EDT: NOTICE : Source path set to /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.xz
27 Oct 2019 03:13:50 EDT: NOTICE : stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-s390-20191027T071005Z/tmp/stage1root
27 Oct 2019 03:13:50 EDT: NOTICE : Removing AutoResume Points ...
27 Oct 2019 03:13:50 EDT: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20191027T071005Z
27 Oct 2019 03:13:50 EDT: NOTICE : --- Running action sequence: unpack
27 Oct 2019 03:13:50 EDT: NOTICE : Resume: "seed source" unpack resume point is disabled
27 Oct 2019 03:13:50 EDT: NOTICE : Resume: Target chroot is invalid, cleaning up...
27 Oct 2019 03:13:50 EDT: NOTICE : Removing AutoResume Points ...
27 Oct 2019 03:13:50 EDT: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage1-s390-20191027T071005Z
27 Oct 2019 03:13:50 EDT: NOTICE : Clearing the chroot path ...
27 Oct 2019 03:13:50 EDT: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/stage1-s390-20191027T071005Z
27 Oct 2019 03:13:50 EDT: NOTICE : Starting auto from /var/tmp/catalyst/builds/default/stage3-s390-latest.tar.xz
27 Oct 2019 03:13:50 EDT: NOTICE : to /var/tmp/catalyst/tmp/default/stage1-s390-20191027T071005Z (this may take some time) ..
27 Oct 2019 03:14:09 EDT: NOTICE : --- Running action sequence: unpack_snapshot
27 Oct 2019 03:14:09 EDT: NOTICE : Unpacking portage tree (this can take a long time) ...
27 Oct 2019 03:14:33 EDT: NOTICE : --- Running action sequence: setup_confdir
27 Oct 2019 03:14:33 EDT: NOTICE : --- Running action sequence: portage_overlay
27 Oct 2019 03:14:33 EDT: NOTICE : --- Running action sequence: base_dirs
27 Oct 2019 03:14:33 EDT: NOTICE : --- Running action sequence: bind
27 Oct 2019 03:14:33 EDT: NOTICE : --- Running action sequence: chroot_setup
27 Oct 2019 03:14:33 EDT: NOTICE : Setting up chroot...
27 Oct 2019 03:14:33 EDT: WARNING : Overriding certain env variables may cause catastrophic failure.
27 Oct 2019 03:14:33 EDT: WARNING : If your build fails look here first as the possible problem.
27 Oct 2019 03:14:33 EDT: WARNING : Catalyst assumes you know what you are doing when setting these variables.
27 Oct 2019 03:14:33 EDT: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
27 Oct 2019 03:14:33 EDT: WARNING : You have been warned.
27 Oct 2019 03:14:33 EDT: NOTICE : Writing the stage make.conf to: /var/tmp/catalyst/tmp/default/stage1-s390-20191027T071005Z/etc/portage/make.conf
27 Oct 2019 03:14:33 EDT: NOTICE : STICKY-CONFIG is enabled
27 Oct 2019 03:14:33 EDT: NOTICE : --- Running action sequence: setup_environment
27 Oct 2019 03:14:33 EDT: NOTICE : --- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20191027T071005Z/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20191027T071005Z/tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20191027T071005Z/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
chroot /var/tmp/catalyst/tmp/default/stage1-s390-20191027T071005Z /tmp/stage1-chroot.sh
>>> Regenerating /etc/ld.so.cache...
Adding USE="${USE} build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-apps/portage-2.3.76
* Determining the location of the kernel source code
* Unable to find kernel sources at /usr/src/linux
* Please make sure that /usr/src/linux points at your running kernel,
* (or the kernel you wish to build against).
* Alternatively, set the KERNEL_DIR environment variable to the kernel sources location
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - IPC_NS
* - PID_NS
* - NET_NS
* You're on your own to make sure they are set if needed.
>>> Emerging (1 of 1) sys-apps/portage-2.3.76::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.76::gentoo
* Messages for package sys-apps/portage-2.3.76:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - IPC_NS
* - PID_NS
* - NET_NS
* You're on your own to make sure they are set if needed.
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world --jobs 2 --load-average 2
[ebuild U ] sys-libs/timezone-data-2019c [2019b-r1]
[ebuild N ] virtual/perl-Carp-1.500.0-r1
[ebuild N ] virtual/perl-IO-1.390.0
[ebuild N ] virtual/perl-Exporter-5.730.0-r1
[ebuild N ] dev-perl/Class-Inspector-1.320.0
[ebuild N ] dev-perl/File-ShareDir-Install-0.110.0
[ebuild N ] dev-perl/File-ShareDir-1.104.0
[ebuild U ] dev-perl/libintl-perl-1.310.0 [1.280.0]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by dev-perl/File-ShareDir-1.104.0::gentoo
# required by dev-perl/libintl-perl-1.310.0::gentoo[-minimal]
# required by sys-apps/texinfo-6.6-r1::gentoo
# required by sys-fs/e2fsprogs-1.45.4::gentoo
# required by @system
# required by @world (argument)
=dev-perl/Class-Inspector-1.320.0 ~s390
# required by dev-perl/File-ShareDir-1.104.0::gentoo
# required by dev-perl/libintl-perl-1.310.0::gentoo[-minimal]
# required by sys-apps/texinfo-6.6-r1::gentoo
# required by sys-fs/e2fsprogs-1.45.4::gentoo
# required by @system
# required by @world (argument)
=dev-perl/File-ShareDir-Install-0.110.0 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
27 Oct 2019 03:15:24 EDT: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
27 Oct 2019 03:15:24 EDT: ERROR : CatalystError: Stage build aborting due to error.
27 Oct 2019 03:15:24 EDT: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1360, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
27 Oct 2019 03:15:24 EDT: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
44.75user 8.92system 1:38.19elapsed 54%CPU (0avgtext+0avgdata 499104maxresident)k
0inputs+0outputs (345major+2320186minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191027T071005Z.cpHvNZ/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
* [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
@ 2020-01-08 12:15 root
0 siblings, 0 replies; 233+ messages in thread
From: root @ 2020-01-08 12:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Applying io_quotes_use to linux/usb/tmc.h
Applying io_quotes_use to linux/fuse.h
Applying io_quotes_use to linux/vm_sockets.h
Applying io_quotes_use to linux/nbd.h
Applying io_quotes_use to linux/cm4000_cs.h
Applying io_quotes_use to linux/synclink.h
Applying io_quotes_def to linux/pci_regs.h
Applying io_quotes_use to linux/genwqe/genwqe_card.h
Applying io_quotes_use to linux/hsi/hsi_char.h
Applying io_quotes_use to linux/hsi/cs-protocol.h
Applying io_quotes_use to linux/auto_fs.h
Applying io_quotes_use to linux/phantom.h
Applying io_quotes_use to linux/blkzoned.h
Applying io_quotes_use to linux/aspeed-lpc-ctrl.h
Applying io_quotes_use to linux/uinput.h
Applying io_quotes_use to linux/lightnvm.h
Applying io_quotes_use to linux/vtpm_proxy.h
Applying io_quotes_use to linux/random.h
Applying io_quotes_use to linux/wmi.h
Applying io_quotes_use to linux/pktcdvd.h
Applying io_quotes_use to linux/vfio.h
Applying io_quotes_use to linux/ipmi_bmc.h
Applying io_quotes_use to linux/fd.h
Applying io_quotes_use to linux/fpga-dfl.h
Applying io_quotes_use to linux/psp-sev.h
Applying io_quotes_use to linux/cciss_ioctl.h
Applying io_quotes_use to linux/gpio.h
Applying io_quotes_use to linux/if_pppox.h
Applying io_quotes_use to linux/rfkill.h
Applying io_quotes_use to linux/btrfs.h
Applying io_quotes_use to linux/watchdog.h
Applying io_quotes_use to linux/omapfb.h
Applying io_quotes_use to linux/fs.h
Applying io_quotes_use to linux/dm-ioctl.h
Applying io_quotes_use to linux/dn.h
Applying io_quotes_def to linux/soundcard.h
Applying io_quotes_use to linux/rpmsg.h
Applying io_quotes_use to linux/vhost.h
Applying io_quotes_def to linux/version.h
Applying io_quotes_use to linux/userfaultfd.h
Applying io_quotes_use to linux/atmbr2684.h
Applying io_quotes_use to linux/ndctl.h
Applying io_quotes_use to linux/raw.h
Applying io_quotes_use to linux/vboxguest.h
Applying io_quotes_use to linux/dma-buf.h
Applying io_quotes_use to linux/sync_file.h
Applying io_quotes_use to linux/mmtimer.h
Applying io_quotes_use to linux/bt-bmc.h
Applying io_quotes_use to linux/kvm.h
Applying io_quotes_use to linux/ipmi.h
Applying io_quotes_use to linux/ppdev.h
Applying io_quotes_use to linux/gigaset_dev.h
Applying io_quotes_use to linux/agpgart.h
Applying io_quotes_use to linux/rio_cm_cdev.h
Applying io_quotes_use to asm/vmcp.h
Applying io_quotes_use to asm/dasd.h
Applying io_quotes_use to asm/cmb.h
Applying io_quotes_use to asm/pkey.h
Applying io_quotes_use to asm/chsc.h
Applying io_quotes_use to asm/zcrypt.h
Applying io_quotes_use to asm/clp.h
Applying io_quotes_use to sys/mount.h
Applying io_quotes_use to sys/raw.h
Applying ctrl_quotes_def to readline/chardefs.h
Applying io_quotes_def to proc/version.h
Applying pthread_incomplete_struct_argument to pthread.h
Applying io_quotes_use to mtd/ubi-user.h
Applying machine_name to openssl/e_os2.h
Applying glibc_stdint to stdint.h
Applying io_quotes_def to curl/curlver.h
Cleaning up unneeded directories:
fixincludes is done
echo timestamp > stmp-fixinc
rm gcc.pod
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-9.2.0-r2/work/build/gcc'
make[2]: *** [Makefile:4663: all-stage1-gcc] Error 2
make[2]: Leaving directory '/var/tmp/portage/sys-devel/gcc-9.2.0-r2/work/build'
make[1]: *** [Makefile:19715: stage1-bubble] Error 2
make[1]: Leaving directory '/var/tmp/portage/sys-devel/gcc-9.2.0-r2/work/build'
make: *** [Makefile:20047: bootstrap-lean] Error 2
* ERROR: sys-devel/gcc-9.2.0-r2::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-9.2.0-r2::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-9.2.0-r2::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-9.2.0-r2/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-9.2.0-r2/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-9.2.0-r2/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-9.2.0-r2/work/gcc-9.2.0'
*
* Please include /var/tmp/portage/sys-devel/gcc-9.2.0-r2/work/gcc-build-logs.tar.bz2 in your bug report.
*
* Messages for package sys-apps/portage-2.3.79 merged to /tmp/stage1root/:
* Unable to find kernel sources at /tmp/stage1root/usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - IPC_NS
* - PID_NS
* - NET_NS
* You're on your own to make sure they are set if needed.
* Messages for package sys-libs/timezone-data-2019c merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package sys-apps/coreutils-8.30 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.33.2 merged to /tmp/stage1root/:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-apps/shadow-4.6 merged to /tmp/stage1root/:
* Running 'grpck' returned errors. Please run it by hand, and then
* run 'grpconv' afterwards!
* Messages for package dev-lang/python-3.6.9 merged to /tmp/stage1root/:
* You have configured Python without XML support.
* This is NOT a recommended configuration as you
* may face problems parsing any XML documents.
* Messages for package dev-lang/python-2.7.17 merged to /tmp/stage1root/:
* You have configured Python without XML support.
* This is NOT a recommended configuration as you
* may face problems parsing any XML documents.
* Messages for package sys-libs/glibc-2.29-r7 merged to /tmp/stage1root/:
* Applying Gentoo Glibc Patchset 2.29-8
* Messages for package dev-libs/libxml2-2.9.9-r3 merged to /tmp/stage1root/:
* Skipping XML catalog creation for stage building (bug #208887).
* Messages for package sys-devel/gcc-9.2.0-r2 merged to /tmp/stage1root/:
* ERROR: sys-devel/gcc-9.2.0-r2::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-9.2.0-r2::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-9.2.0-r2::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-9.2.0-r2/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-9.2.0-r2/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-9.2.0-r2/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-9.2.0-r2/work/gcc-9.2.0'
*
* Please include /var/tmp/portage/sys-devel/gcc-9.2.0-r2/work/gcc-build-logs.tar.bz2 in your bug report.
*
08 Jan 2020 07:15:13 EST: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
08 Jan 2020 07:15:13 EST: ERROR : CatalystError: Stage build aborting due to error.
08 Jan 2020 07:15:13 EST: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1366, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1375, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
08 Jan 2020 07:15:13 EST: NOTICE : Cleaning up... Running unbind()
08 Jan 2020 07:15:13 EST: NOTICE : /var/tmp/catalyst/tmp/default/stage1-s390-20200108T111854Z/tmp/kerncache is not a mount point. Skipping
08 Jan 2020 07:15:13 EST: NOTICE : /var/tmp/catalyst/tmp/default/stage1-s390-20200108T111854Z/var/cache/binpkgs is not a mount point. Skipping
08 Jan 2020 07:15:13 EST: NOTICE : /var/tmp/catalyst/tmp/default/stage1-s390-20200108T111854Z/tmp/stage1root/proc is not a mount point. Skipping
08 Jan 2020 07:15:13 EST: NOTICE : /var/tmp/catalyst/tmp/default/stage1-s390-20200108T111854Z/run is not a mount point. Skipping
08 Jan 2020 07:15:13 EST: NOTICE : /var/tmp/catalyst/tmp/default/stage1-s390-20200108T111854Z/dev/shm does not exist. Skipping
08 Jan 2020 07:15:13 EST: NOTICE : /var/tmp/catalyst/tmp/default/stage1-s390-20200108T111854Z/dev/pts does not exist. Skipping
08 Jan 2020 07:15:13 EST: NOTICE : /var/tmp/catalyst/tmp/default/stage1-s390-20200108T111854Z/var/tmp/portage is not a mount point. Skipping
08 Jan 2020 07:15:13 EST: NOTICE : /var/tmp/catalyst/tmp/default/stage1-s390-20200108T111854Z/var/cache/distfiles is not a mount point. Skipping
08 Jan 2020 07:15:13 EST: NOTICE : /var/tmp/catalyst/tmp/default/stage1-s390-20200108T111854Z/var/db/repos/gentoo is not a mount point. Skipping
08 Jan 2020 07:15:13 EST: NOTICE : /var/tmp/catalyst/tmp/default/stage1-s390-20200108T111854Z/dev is not a mount point. Skipping
08 Jan 2020 07:15:13 EST: NOTICE : /var/tmp/catalyst/tmp/default/stage1-s390-20200108T111854Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
3293.67user 1173.58system 54:26.11elapsed 136%CPU (0avgtext+0avgdata 1650944maxresident)k
0inputs+0outputs (3354major+461915220minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200108T111854Z.iWGaHV/log/stage1.log
^ permalink raw reply [flat|nested] 233+ messages in thread
end of thread, other threads:[~2020-01-08 12:15 UTC | newest]
Thread overview: 233+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-08-12 7:27 [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec root
-- strict thread matches above, loose matches on Subject: below --
2020-01-08 12:15 root
2019-10-27 7:15 root
2019-10-26 7:15 root
2019-10-04 7:20 root
2019-10-03 7:15 root
2019-10-02 7:14 root
2019-06-03 7:14 root
2018-08-16 7:27 root
2018-08-15 7:27 root
2018-08-14 7:28 root
2018-08-13 7:27 root
2018-08-11 7:27 root
2018-08-10 7:27 root
2018-08-09 7:54 root
2018-08-08 7:28 root
2018-08-07 7:27 root
2018-08-06 7:27 root
2018-08-05 7:32 root
2018-08-04 7:28 root
2018-08-03 7:27 root
2018-08-02 7:27 root
2018-08-01 7:27 root
2018-07-31 7:49 root
2018-07-30 7:27 root
2018-07-29 7:26 root
2018-07-28 7:28 root
2018-07-27 7:28 root
2018-07-26 7:27 root
2018-05-31 7:15 root
2018-05-30 7:17 root
2018-05-29 7:16 root
2018-05-28 7:15 root
2018-05-27 7:15 root
2018-05-26 7:15 root
2018-05-25 7:15 root
2018-05-22 7:15 root
2018-05-21 7:16 root
2018-05-20 7:23 root
2018-05-19 7:16 root
2018-05-18 7:15 root
2018-05-17 7:15 root
2018-05-16 7:16 root
2018-05-15 7:23 root
2018-05-14 7:16 root
2018-05-13 7:15 root
2018-05-12 7:15 root
2018-05-11 7:16 root
2018-05-10 7:15 root
2018-05-09 7:15 root
2018-05-08 7:15 root
2018-05-07 7:15 root
2018-05-06 7:15 root
2018-05-05 7:15 root
2018-05-04 7:15 root
2018-05-03 7:16 root
2018-05-02 7:15 root
2018-05-01 7:15 root
2018-04-30 8:17 root
2018-04-29 8:22 root
2018-04-28 8:24 root
2018-04-27 8:26 root
2018-04-26 8:25 root
2018-04-25 8:24 root
2018-04-24 8:24 root
2018-04-23 8:23 root
2018-04-22 8:23 root
2018-04-21 7:28 root
2018-04-20 7:28 root
2018-04-19 7:15 root
2018-04-18 7:28 root
2018-04-17 7:16 root
2018-04-16 7:16 root
2018-04-15 7:16 root
2018-04-14 7:16 root
2018-04-13 7:16 root
2018-04-12 7:16 root
2018-04-11 7:16 root
2018-04-10 7:16 root
2018-04-09 7:16 root
2018-04-08 7:16 root
2018-04-07 7:16 root
2018-04-06 7:16 root
2018-04-05 7:16 root
2018-04-04 7:16 root
2018-04-03 7:18 root
2018-04-02 7:16 root
2018-04-01 7:16 root
2018-03-31 7:16 root
2018-03-30 7:20 root
2018-03-29 7:16 root
2018-03-28 7:15 root
2018-03-27 7:15 root
2018-03-26 7:15 root
2018-03-25 7:15 root
2018-03-24 7:15 root
2018-03-23 7:15 root
2018-03-22 7:16 root
2018-03-21 7:15 root
2018-03-20 7:14 root
2018-03-19 7:15 root
2018-03-18 7:15 root
2018-03-17 7:15 root
2018-03-16 7:15 root
2018-03-15 7:15 root
2018-03-05 8:15 root
2018-03-04 8:14 root
2018-03-03 8:15 root
2018-01-14 19:56 root
2018-01-14 9:53 root
2018-01-14 9:39 root
2018-01-14 9:18 root
2018-01-14 8:20 root
2018-01-13 8:20 root
2018-01-12 8:20 root
2018-01-11 8:21 root
2018-01-10 8:20 root
2018-01-09 8:14 root
2018-01-08 8:14 root
2018-01-07 8:17 root
2018-01-07 5:45 root
2017-08-07 7:15 root
2017-08-06 7:15 root
2017-08-05 7:15 root
2017-08-04 7:15 root
2017-08-03 7:15 root
2017-08-02 7:15 root
2017-08-01 7:15 root
2017-07-31 7:15 root
2017-07-30 7:15 root
2017-07-29 7:15 root
2017-07-28 7:15 root
2017-07-27 7:15 root
2017-07-26 7:15 root
2017-07-25 7:16 root
2017-07-24 7:15 root
2017-07-23 7:15 root
2017-07-22 7:15 root
2017-07-21 7:15 root
2017-07-20 7:15 root
2017-07-19 7:15 root
2017-07-18 7:15 root
2017-07-17 7:14 root
2017-07-16 7:15 root
2017-07-15 7:15 root
2017-07-14 7:15 root
2017-07-13 7:15 root
2017-07-12 7:15 root
2017-07-11 7:15 root
2017-07-10 7:15 root
2017-07-09 7:15 root
2017-07-08 7:15 root
2017-07-07 7:15 root
2017-07-06 7:15 root
2017-07-05 7:15 root
2017-07-04 7:15 root
2017-07-03 7:15 root
2017-07-02 7:14 root
2017-07-01 7:15 root
2017-06-30 7:15 root
2017-06-29 7:15 root
2017-06-28 7:15 root
2017-06-27 7:15 root
2017-06-26 7:15 root
2017-06-25 7:15 root
2017-06-24 7:15 root
2017-06-23 7:15 root
2017-06-22 7:15 root
2017-06-21 7:15 root
2017-06-20 7:15 root
2017-06-19 7:15 root
2017-06-18 7:14 root
2017-04-10 7:15 root
2017-04-09 7:17 root
2017-04-08 7:17 root
2017-04-07 7:16 root
2017-04-06 7:16 root
2017-04-05 7:15 root
2017-04-04 7:15 root
2017-04-03 7:15 root
2017-04-02 7:15 root
2017-04-01 7:15 root
2017-03-31 7:15 root
2017-01-20 9:08 root
2017-01-19 8:15 root
2017-01-18 8:15 root
2017-01-17 8:15 root
2017-01-16 8:15 root
2017-01-15 8:15 root
2017-01-14 8:15 root
2017-01-13 8:14 root
2016-12-08 8:43 root
2016-12-07 8:19 root
2016-11-24 8:27 root
2016-11-23 17:32 root
2016-11-23 8:21 root
2016-11-17 8:44 root
2016-11-10 8:57 root
2016-11-09 9:25 root
2016-11-08 9:13 root
2016-11-07 11:39 root
2016-11-06 9:29 root
2016-11-06 7:36 root
2016-11-05 8:34 root
2016-11-04 10:51 root
2016-11-03 7:37 root
2016-11-02 7:41 root
2016-11-01 7:35 root
2016-10-31 7:35 root
2016-10-30 9:20 root
2016-10-29 7:51 root
2016-10-28 8:20 root
2016-10-27 7:31 root
2016-10-26 7:52 root
2016-10-25 8:51 root
2016-10-22 7:21 root
2016-10-21 7:26 root
2016-10-20 7:50 root
2016-10-19 7:50 root
2016-10-18 7:47 root
2016-10-17 7:31 root
2016-10-16 7:51 root
2016-10-15 7:36 root
2016-10-14 8:26 root
2016-10-13 7:31 root
2016-10-12 7:33 root
2016-10-11 7:36 root
2016-10-10 7:25 root
2016-10-09 8:07 root
2016-08-03 7:21 root
2016-05-29 9:20 root
2016-05-28 7:18 root
2016-05-04 7:17 root
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox