[gentoo-releng-autobuilds] [s390x-auto] Catalyst fatal build error - stage1.spec

["root" <vapier@gentoo.org>]

>>> Emerging (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Installing (19 of 20) dev-libs/glib-2.52.3::gentoo
>>> Emerging (20 of 20) sys-fs/udev-238::gentoo
>>> Installing (20 of 20) sys-fs/udev-238::gentoo
 * Messages for package sys-apps/coreutils-8.29-r1:
 * Make sure you run 'hash -r' in your active shells.
 * You should also re-source your shell settings for LS_COLORS
 *   changes, such as: source /etc/profile
 * Messages for package sys-apps/util-linux-2.32-r4:
 * The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
 * Messages for package dev-libs/glib-2.52.3:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Unable to check for the following kernel config options due
 * to absence of any configured kernel sources or compiled
 * config:
 *  - INOTIFY_USER
 * You're on your own to make sure they are set if needed.
 * Messages for package sys-fs/udev-238:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Unable to check for the following kernel config options due
 * to absence of any configured kernel sources or compiled
 * config:
 *  - BLK_DEV_BSG
 *  - DEVTMPFS
 *  - IDE
 *  - INOTIFY_USER
 *  - SYSFS_DEPRECATED
 *  - SYSFS_DEPRECATED_V2
 *  - SIGNALFD
 *  - EPOLL
 *  - FHANDLE
 *  - NET
 *  - FW_LOADER_USER_HELPER
 *  - UNIX
 * You're on your own to make sure they are set if needed.
 * 
 * Starting from version >= 197 the new predictable network interface names are
 * used by default, see:
 * https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
 * https://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
 * 
 * Example command to get the information for the new interface name before booting
 * (replace <ifname> with, for example, eth0):
 * # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
 * 
 * You can use either kernel parameter "net.ifnames=0", create empty
 * file /etc/systemd/network/99-default.link, or symlink it to /dev/null
 * to disable the feature.
 * 
 * You need to restart udev as soon as possible to make the upgrade go
 * into effect.
 * The method you use to do this depends on your init system.
 * For sys-apps/openrc users it is:
 * # /etc/init.d/udev --nodeps restart
 * 
 * For more information on udev on Gentoo, upgrading, writing udev rules, and
 * fixing known issues visit:
 * https://wiki.gentoo.org/wiki/Udev
 * https://wiki.gentoo.org/wiki/Udev/upgrade








emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
 * Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
 * Initializing /tmp/stage1root/lib as a dir
 * Initializing /tmp/stage1root/usr/lib as a dir
 * Initializing /tmp/stage1root/usr/local/lib as a dir
 * You should reboot now to get /run mounted with tmpfs!


emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep virtual/pkgconfig app-shells/bash:0 app-arch/gzip sys-devel/gnuconfig sys-apps/diffutils app-arch/bzip2 virtual/shadow sys-apps/gawk sys-apps/net-tools sys-apps/less sys-apps/which net-misc/rsync sys-devel/make sys-devel/automake sys-apps/coreutils sys-devel/bison virtual/libc sys-devel/flex sys-apps/baselayout sys-apps/portage sys-devel/autoconf sys-devel/libtool sys-devel/binutils sys-apps/makedev sys-devel/gcc sys-apps/findutils net-misc/wget sys-devel/patch sys-devel/gettext virtual/editor virtual/os-headers sys-apps/file app-arch/tar sys-apps/sed app-arch/xz-utils 
[ebuild  N    ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild  N    ] app-arch/bzip2-1.0.6-r9 to /tmp/stage1root/
[ebuild  N    ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild  N    ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild  N    ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild  N    ] app-arch/tar-1.30 to /tmp/stage1root/
[ebuild  N    ] sys-apps/sed-4.5 to /tmp/stage1root/
[ebuild  N    ] sys-libs/timezone-data-2018d to /tmp/stage1root/
[ebuild  N    ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild  N    ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild  N    ] sys-apps/gawk-4.1.4 to /tmp/stage1root/
[ebuild  N    ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild  N    ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild   R   ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild  N    ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild  N    ] sys-devel/patch-2.7.6-r1 to /tmp/stage1root/
[ebuild  N    ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild  N    ] dev-lang/python-exec-2.4.5 to /tmp/stage1root/
[ebuild  N    ] sys-devel/autoconf-wrapper-13-r1 to /tmp/stage1root/
[ebuild  N    ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild  N    ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild  N    ] sys-apps/coreutils-8.29-r1 to /tmp/stage1root/
[ebuild  N    ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild  N    ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild  N    ] sys-apps/diffutils-3.5 to /tmp/stage1root/
[ebuild  N    ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild  N    ] sys-apps/less-529 to /tmp/stage1root/
[ebuild  N    ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild  N    ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild  N    ] app-misc/pax-utils-1.2.3 to /tmp/stage1root/
[ebuild  N    ] sys-libs/zlib-1.2.11-r2 to /tmp/stage1root/
[ebuild  N    ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild  N    ] sys-apps/file-5.33-r4 to /tmp/stage1root/
[ebuild  N    ] app-arch/xz-utils-5.2.3 to /tmp/stage1root/
[ebuild  N    ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild  N    ] sys-apps/shadow-4.6 to /tmp/stage1root/
[ebuild  N    ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild  N    ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild  N    ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild  N    ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild  N    ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild  N    ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild  N    ] virtual/shadow-0 to /tmp/stage1root/
[ebuild  N    ] sys-devel/binutils-2.30-r2 to /tmp/stage1root/
[ebuild  N    ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild  N    ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild  N    ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild  N    ] app-admin/eselect-1.4.12 to /tmp/stage1root/
[ebuild  N    ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild  N    ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild  N    ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild  N    ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild  N    ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild  N    ] app-portage/portage-utils-0.64 to /tmp/stage1root/
[ebuild  N    ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild  N    ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild  N    ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild  N    ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild  N    ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild  N    ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild  N    ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild  N    ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild  N    ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild  N    ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild  N    ] sys-libs/glibc-2.26-r7 to /tmp/stage1root/
[ebuild  N    ] sys-libs/readline-7.0_p3 to /tmp/stage1root/
[ebuild  N    ] app-shells/bash-4.4_p12 to /tmp/stage1root/
[ebuild  N    ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild  N    ] dev-libs/libxml2-2.9.8 to /tmp/stage1root/
[ebuild  N    ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild  N    ] dev-lang/python-3.6.5 to /tmp/stage1root/
[ebuild  N    ] sys-apps/portage-2.3.40-r1 to /tmp/stage1root/
[ebuild  N    ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild  N    ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild  N    ] net-misc/rsync-3.1.3 to /tmp/stage1root/
[ebuild  N    ] virtual/libc-1 to /tmp/stage1root/
[ebuild  N    ] sys-devel/gcc-7.3.0-r3 to /tmp/stage1root/
[ebuild  N    ] net-misc/wget-1.19.5 to /tmp/stage1root/
[ebuild  N    ] virtual/editor-0-r1 to /tmp/stage1root/
[ebuild  N    ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/

The following keyword changes are necessary to proceed:
 (see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.8.1::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.8 ~s390

Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.

!!! catalyst: run script failed.


Traceback (most recent call last):
  File "modules/generic_stage_target.py", line 1244, in run_local
    "run script failed.",env=self.env)
  File "/usr/lib64/catalyst/modules/catalyst_support.py", line 541, in cmd
    raise CatalystError,myexc
CatalystError
None

!!! catalyst: Stage build aborting due to error.

Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
    mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
    apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
    raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390x-20180801T091425Z/.catalyst_lock'
Command exited with non-zero status 1
782.54user 220.78system 13:29.58elapsed 123%CPU (0avgtext+0avgdata 707472maxresident)k
0inputs+0outputs (717major+114989663minor)pagefaults 0swaps



Full build log at /tmp/catalyst-auto.20180801T091425Z.oBaTiN/log/stage1.log