From: "root" <vapier@gentoo.org>
To: releng@gentoo.org,gentoo-releng-autobuilds@lists.gentoo.org
Subject: [gentoo-releng-autobuilds] [s390x-auto] Catalyst fatal build error - stage1.spec
Date: Sat, 28 Jul 2018 05:27:26 -0400 [thread overview]
Message-ID: <20180728092726.A78D32040D@nightheron.gentoo.org> (raw)
* Messages for package sys-apps/coreutils-8.29-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/util-linux-2.32-r4:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - INOTIFY_USER
* You're on your own to make sure they are set if needed.
* Messages for package sys-fs/udev-238:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Unable to check for the following kernel config options due
* to absence of any configured kernel sources or compiled
* config:
* - BLK_DEV_BSG
* - DEVTMPFS
* - IDE
* - INOTIFY_USER
* - SYSFS_DEPRECATED
* - SYSFS_DEPRECATED_V2
* - SIGNALFD
* - EPOLL
* - FHANDLE
* - NET
* - FW_LOADER_USER_HELPER
* - UNIX
* You're on your own to make sure they are set if needed.
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* https://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* https://wiki.gentoo.org/wiki/Udev
* https://wiki.gentoo.org/wiki/Udev/upgrade
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
--- Invalid atom in /usr/portage/profiles/arch/s390/package.use.mask: net-analyzer/nmap/nmap
--- Invalid atom in /usr/portage/profiles/arch/s390/package.use.mask: net-analyzer/nmap/nmap
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot net-misc/wget sys-devel/automake sys-apps/coreutils sys-devel/gnuconfig virtual/pkgconfig net-misc/rsync sys-apps/makedev app-arch/gzip sys-devel/autoconf virtual/os-headers sys-devel/gcc sys-apps/portage virtual/shadow app-shells/bash:0 sys-apps/sed sys-devel/flex sys-devel/bison sys-apps/file sys-apps/which sys-devel/libtool app-arch/xz-utils app-arch/bzip2 sys-devel/gettext sys-apps/findutils sys-apps/gawk sys-apps/baselayout virtual/editor sys-apps/diffutils app-arch/tar sys-apps/net-tools sys-devel/make sys-devel/patch sys-devel/binutils sys-apps/less sys-apps/grep virtual/libc
--- Invalid atom in /usr/portage/profiles/arch/s390/package.use.mask: net-analyzer/nmap/nmap
--- Invalid atom in /usr/portage/profiles/arch/s390/package.use.mask: net-analyzer/nmap/nmap
[ebuild N ] sys-libs/ncurses-6.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r9 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.5 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.30 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2018d to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.4 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.6-r1 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.5 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.5 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.33-r4 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.6 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.30-r2 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.12 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20171204 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.64 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.26-r7 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-7.0_p3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.4_p12 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.8 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.6.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.40-r1 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.5 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-7.3.0-r3 to /tmp/stage1root/
[ebuild N ] virtual/editor-0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-devel/gettext-0.19.8.1::gentoo
# required by sys-devel/gettext (argument)
=dev-libs/libxml2-2.9.8 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390x-20180728T091321Z/.catalyst_lock'
Command exited with non-zero status 1
779.36user 208.36system 12:36.36elapsed 130%CPU (0avgtext+0avgdata 707424maxresident)k
0inputs+0outputs (750major+115091377minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180728T091321Z.8npsJT/log/stage1.log
next reply other threads:[~2018-07-28 9:27 UTC|newest]
Thread overview: 257+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-28 9:27 root [this message]
-- strict thread matches above, loose matches on Subject: below --
2020-01-06 6:47 [gentoo-releng-autobuilds] [s390x-auto] Catalyst fatal build error - stage1.spec root
2019-11-19 11:06 root
2019-11-19 9:04 root
2019-10-27 9:15 root
2019-10-27 7:37 root
2019-10-26 9:15 root
2019-10-26 7:32 root
2019-10-04 9:21 root
2019-10-03 9:21 root
2019-10-02 9:15 root
2019-09-10 10:46 root
2019-06-03 9:15 root
2018-11-26 11:45 root
2018-11-25 11:20 root
2018-11-24 11:28 root
2018-11-23 11:25 root
2018-11-22 11:30 root
2018-11-21 11:33 root
2018-11-20 11:28 root
2018-11-19 11:34 root
2018-11-18 11:55 root
2018-11-17 11:29 root
2018-11-16 11:27 root
2018-11-15 11:20 root
2018-11-14 11:20 root
2018-11-13 11:20 root
2018-11-12 11:20 root
2018-11-11 11:20 root
2018-11-10 11:20 root
2018-11-09 11:20 root
2018-11-08 11:20 root
2018-11-07 11:35 root
2018-11-06 12:04 root
2018-11-05 11:22 root
2018-10-24 10:23 root
2018-08-16 9:32 root
2018-08-15 9:23 root
2018-08-14 9:18 root
2018-08-13 9:27 root
2018-08-12 9:26 root
2018-08-11 9:27 root
2018-08-10 9:27 root
2018-08-09 9:29 root
2018-08-08 9:27 root
2018-08-07 9:27 root
2018-08-06 9:27 root
2018-08-05 9:27 root
2018-08-04 9:28 root
2018-08-03 9:46 root
2018-08-02 9:28 root
2018-08-01 9:29 root
2018-07-31 9:29 root
2018-07-30 9:33 root
2018-07-29 9:27 root
2018-07-27 9:27 root
2018-07-26 9:42 root
2018-05-31 9:15 root
2018-05-30 9:19 root
2018-05-29 9:16 root
2018-05-28 9:17 root
2018-05-27 9:15 root
2018-05-26 9:15 root
2018-05-25 9:15 root
2018-05-23 9:19 root
2018-05-22 9:15 root
2018-05-21 9:15 root
2018-05-20 9:22 root
2018-05-19 9:23 root
2018-05-18 9:16 root
2018-05-17 9:17 root
2018-05-16 9:15 root
2018-05-15 9:21 root
2018-05-14 9:19 root
2018-05-13 9:20 root
2018-05-12 9:15 root
2018-05-11 9:17 root
2018-05-10 9:15 root
2018-05-09 9:17 root
2018-05-08 9:15 root
2018-05-07 9:15 root
2018-05-06 9:15 root
2018-05-05 9:15 root
2018-05-04 9:18 root
2018-05-03 9:18 root
2018-05-02 9:14 root
2018-05-01 9:15 root
2018-04-30 10:18 root
2018-04-29 10:15 root
2018-04-28 10:22 root
2018-04-27 10:24 root
2018-04-26 10:24 root
2018-04-25 10:21 root
2018-04-24 10:22 root
2018-04-23 10:23 root
2018-04-22 10:21 root
2018-04-21 9:27 root
2018-04-20 9:28 root
2018-04-19 9:29 root
2018-04-18 9:30 root
2018-04-17 9:16 root
2018-04-16 9:16 root
2018-04-15 9:15 root
2018-04-14 9:16 root
2018-04-13 9:16 root
2018-04-12 9:16 root
2018-04-11 9:16 root
2018-04-10 9:17 root
2018-04-09 9:19 root
2018-04-08 9:15 root
2018-04-07 9:16 root
2018-04-06 9:17 root
2018-04-05 9:16 root
2018-04-04 9:14 root
2018-04-03 9:16 root
2018-04-02 9:16 root
2018-04-01 9:15 root
2018-03-31 9:16 root
2018-03-30 9:16 root
2018-03-29 9:16 root
2018-03-28 9:15 root
2018-03-27 9:15 root
2018-03-26 9:15 root
2018-03-25 9:15 root
2018-03-24 9:15 root
2018-03-23 9:15 root
2018-03-22 9:15 root
2018-03-21 9:15 root
2018-03-20 9:15 root
2018-03-19 9:16 root
2018-03-18 9:14 root
2018-03-17 9:15 root
2018-03-16 9:15 root
2018-03-15 9:18 root
2018-03-05 10:15 root
2018-03-04 10:14 root
2018-03-03 10:15 root
2018-01-15 11:21 root
2018-01-14 20:24 root
2018-01-14 10:13 root
2018-01-14 9:51 root
2018-01-14 9:36 root
2018-01-14 9:33 root
2018-01-13 10:13 root
2018-01-12 10:20 root
2018-01-11 10:20 root
2018-01-10 10:20 root
2018-01-09 10:15 root
2018-01-08 10:14 root
2018-01-07 10:14 root
2018-01-07 5:45 root
2017-08-07 9:15 root
2017-08-06 9:15 root
2017-08-05 9:15 root
2017-08-04 9:15 root
2017-08-03 9:15 root
2017-08-02 9:15 root
2017-08-01 9:15 root
2017-07-31 9:15 root
2017-07-30 9:15 root
2017-07-29 9:14 root
2017-07-28 9:15 root
2017-07-27 9:15 root
2017-07-26 9:14 root
2017-07-25 9:15 root
2017-07-24 9:15 root
2017-07-23 9:15 root
2017-07-22 9:16 root
2017-07-21 9:14 root
2017-07-20 9:15 root
2017-07-19 9:15 root
2017-07-18 9:14 root
2017-07-17 9:14 root
2017-07-16 9:15 root
2017-07-15 9:15 root
2017-07-14 9:15 root
2017-07-13 9:15 root
2017-07-12 9:15 root
2017-07-11 9:15 root
2017-07-10 9:15 root
2017-07-09 9:15 root
2017-07-08 9:15 root
2017-07-07 9:15 root
2017-07-06 9:15 root
2017-07-05 9:15 root
2017-07-04 9:15 root
2017-07-03 9:15 root
2017-07-02 9:15 root
2017-07-01 9:15 root
2017-06-30 9:15 root
2017-06-29 9:15 root
2017-06-28 9:15 root
2017-06-27 9:15 root
2017-06-26 9:15 root
2017-06-25 9:15 root
2017-06-24 9:15 root
2017-06-23 9:15 root
2017-06-22 9:15 root
2017-06-21 9:15 root
2017-06-20 9:15 root
2017-06-19 9:15 root
2017-06-18 9:14 root
2017-04-10 9:14 root
2017-04-10 3:05 root
2017-04-06 9:16 root
2017-04-05 9:15 root
2017-04-04 9:15 root
2017-04-03 9:15 root
2017-04-02 9:15 root
2017-04-01 9:15 root
2017-03-31 9:15 root
2017-01-20 11:08 root
2017-01-19 10:17 root
2017-01-18 10:15 root
2017-01-17 10:15 root
2017-01-16 10:14 root
2017-01-15 10:15 root
2017-01-14 10:15 root
2017-01-13 10:14 root
2016-12-08 10:47 root
2016-12-07 10:18 root
2016-11-10 10:43 root
2016-11-09 11:56 root
2016-11-08 11:28 root
2016-11-07 13:16 root
2016-11-06 10:55 root
2016-11-05 13:10 root
2016-11-04 11:45 root
2016-11-03 9:26 root
2016-11-02 10:11 root
2016-11-01 9:23 root
2016-10-31 9:28 root
2016-10-30 10:39 root
2016-10-29 10:17 root
2016-10-28 10:22 root
2016-10-27 9:27 root
2016-10-26 9:34 root
2016-10-25 10:01 root
2016-10-22 9:31 root
2016-10-21 9:24 root
2016-10-20 10:04 root
2016-10-19 10:11 root
2016-10-18 10:03 root
2016-10-17 9:20 root
2016-10-16 9:20 root
2016-10-15 9:26 root
2016-10-14 9:44 root
2016-10-13 9:24 root
2016-10-12 10:16 root
2016-10-11 9:25 root
2016-10-10 9:20 root
2016-10-09 9:29 root
2016-10-08 9:28 root
2016-08-03 9:17 root
2016-05-29 10:48 root
2016-05-28 9:24 root
2016-05-04 9:17 root
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180728092726.A78D32040D@nightheron.gentoo.org \
--to=vapier@gentoo.org \
--cc=gentoo-releng-autobuilds@lists.gentoo.org \
--cc=releng@gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox