From: "root" <vapier@gentoo.org>
To: releng@gentoo.org,gentoo-releng-autobuilds@lists.gentoo.org
Subject: [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
Date: Mon, 09 Apr 2018 03:16:57 -0400 [thread overview]
Message-ID: <20180409071657.BEFAF201C5@nightheron.gentoo.org> (raw)
to /var/tmp/catalyst/tmp/default/stage1-s390-20180409T071228Z/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20180409T071228Z/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20180409T071228Z/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390-20180409T071228Z///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180409T071228Z//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20180409T071228Z//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20180409T071228Z/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 4) sys-apps/portage-2.3.8::gentoo
>>> Emerging (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Installing (2 of 4) sys-devel/automake-1.15.1-r2::gentoo
>>> Emerging (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Installing (3 of 4) dev-python/setuptools-34.0.2-r1::gentoo
>>> Emerging (4 of 4) dev-python/six-1.11.0::gentoo
>>> Installing (4 of 4) dev-python/six-1.11.0::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/makedev sys-apps/net-tools sys-apps/findutils app-arch/bzip2 sys-devel/automake sys-devel/gettext sys-devel/flex sys-apps/which app-arch/xz-utils sys-apps/less virtual/libc sys-apps/sed sys-apps/portage sys-apps/coreutils sys-devel/binutils virtual/editor sys-devel/gnuconfig sys-apps/grep sys-devel/autoconf net-misc/rsync virtual/os-headers app-arch/gzip net-misc/wget sys-apps/file sys-devel/bison app-shells/bash:0 sys-apps/baselayout sys-apps/diffutils sys-devel/make sys-devel/libtool virtual/shadow sys-devel/gcc sys-apps/gawk app-arch/tar sys-devel/patch virtual/pkgconfig
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20170101 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017c to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.4.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.26 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.8-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r4 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20161110235919 to /tmp/stage1root/
[ebuild N ] sys-apps/less-529 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.2.3-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.2 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.13 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.29.2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.29.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r3 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.25-r9 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.7 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.5.4-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.14-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2-r2 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r4 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.7 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=sys-apps/sandbox-2.13 ~s390
# required by sys-apps/portage-2.3.8::gentoo
# required by app-admin/perl-cleaner-2.25::gentoo
# required by dev-lang/perl-5.24.3::gentoo
# required by perl-core/File-Temp-0.230.400-r1::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=app-misc/pax-utils-1.2.3-r1 ~s390
# required by virtual/shadow-0::gentoo
# required by @system
# required by @world (argument)
=sys-apps/shadow-4.5-r1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20180409T071228Z/.catalyst_lock'
Command exited with non-zero status 1
81.50user 22.24system 2:12.65elapsed 78%CPU (0avgtext+0avgdata 227936maxresident)k
0inputs+0outputs (710major+7301241minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180409T071228Z.N5IyXn/log/stage1.log
next reply other threads:[~2018-04-09 7:17 UTC|newest]
Thread overview: 233+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-09 7:16 root [this message]
-- strict thread matches above, loose matches on Subject: below --
2020-01-08 12:15 [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec root
2019-10-27 7:15 root
2019-10-26 7:15 root
2019-10-04 7:20 root
2019-10-03 7:15 root
2019-10-02 7:14 root
2019-06-03 7:14 root
2018-08-16 7:27 root
2018-08-15 7:27 root
2018-08-14 7:28 root
2018-08-13 7:27 root
2018-08-12 7:27 root
2018-08-11 7:27 root
2018-08-10 7:27 root
2018-08-09 7:54 root
2018-08-08 7:28 root
2018-08-07 7:27 root
2018-08-06 7:27 root
2018-08-05 7:32 root
2018-08-04 7:28 root
2018-08-03 7:27 root
2018-08-02 7:27 root
2018-08-01 7:27 root
2018-07-31 7:49 root
2018-07-30 7:27 root
2018-07-29 7:26 root
2018-07-28 7:28 root
2018-07-27 7:28 root
2018-07-26 7:27 root
2018-05-31 7:15 root
2018-05-30 7:17 root
2018-05-29 7:16 root
2018-05-28 7:15 root
2018-05-27 7:15 root
2018-05-26 7:15 root
2018-05-25 7:15 root
2018-05-22 7:15 root
2018-05-21 7:16 root
2018-05-20 7:23 root
2018-05-19 7:16 root
2018-05-18 7:15 root
2018-05-17 7:15 root
2018-05-16 7:16 root
2018-05-15 7:23 root
2018-05-14 7:16 root
2018-05-13 7:15 root
2018-05-12 7:15 root
2018-05-11 7:16 root
2018-05-10 7:15 root
2018-05-09 7:15 root
2018-05-08 7:15 root
2018-05-07 7:15 root
2018-05-06 7:15 root
2018-05-05 7:15 root
2018-05-04 7:15 root
2018-05-03 7:16 root
2018-05-02 7:15 root
2018-05-01 7:15 root
2018-04-30 8:17 root
2018-04-29 8:22 root
2018-04-28 8:24 root
2018-04-27 8:26 root
2018-04-26 8:25 root
2018-04-25 8:24 root
2018-04-24 8:24 root
2018-04-23 8:23 root
2018-04-22 8:23 root
2018-04-21 7:28 root
2018-04-20 7:28 root
2018-04-19 7:15 root
2018-04-18 7:28 root
2018-04-17 7:16 root
2018-04-16 7:16 root
2018-04-15 7:16 root
2018-04-14 7:16 root
2018-04-13 7:16 root
2018-04-12 7:16 root
2018-04-11 7:16 root
2018-04-10 7:16 root
2018-04-08 7:16 root
2018-04-07 7:16 root
2018-04-06 7:16 root
2018-04-05 7:16 root
2018-04-04 7:16 root
2018-04-03 7:18 root
2018-04-02 7:16 root
2018-04-01 7:16 root
2018-03-31 7:16 root
2018-03-30 7:20 root
2018-03-29 7:16 root
2018-03-28 7:15 root
2018-03-27 7:15 root
2018-03-26 7:15 root
2018-03-25 7:15 root
2018-03-24 7:15 root
2018-03-23 7:15 root
2018-03-22 7:16 root
2018-03-21 7:15 root
2018-03-20 7:14 root
2018-03-19 7:15 root
2018-03-18 7:15 root
2018-03-17 7:15 root
2018-03-16 7:15 root
2018-03-15 7:15 root
2018-03-05 8:15 root
2018-03-04 8:14 root
2018-03-03 8:15 root
2018-01-14 19:56 root
2018-01-14 9:53 root
2018-01-14 9:39 root
2018-01-14 9:18 root
2018-01-14 8:20 root
2018-01-13 8:20 root
2018-01-12 8:20 root
2018-01-11 8:21 root
2018-01-10 8:20 root
2018-01-09 8:14 root
2018-01-08 8:14 root
2018-01-07 8:17 root
2018-01-07 5:45 root
2017-08-07 7:15 root
2017-08-06 7:15 root
2017-08-05 7:15 root
2017-08-04 7:15 root
2017-08-03 7:15 root
2017-08-02 7:15 root
2017-08-01 7:15 root
2017-07-31 7:15 root
2017-07-30 7:15 root
2017-07-29 7:15 root
2017-07-28 7:15 root
2017-07-27 7:15 root
2017-07-26 7:15 root
2017-07-25 7:16 root
2017-07-24 7:15 root
2017-07-23 7:15 root
2017-07-22 7:15 root
2017-07-21 7:15 root
2017-07-20 7:15 root
2017-07-19 7:15 root
2017-07-18 7:15 root
2017-07-17 7:14 root
2017-07-16 7:15 root
2017-07-15 7:15 root
2017-07-14 7:15 root
2017-07-13 7:15 root
2017-07-12 7:15 root
2017-07-11 7:15 root
2017-07-10 7:15 root
2017-07-09 7:15 root
2017-07-08 7:15 root
2017-07-07 7:15 root
2017-07-06 7:15 root
2017-07-05 7:15 root
2017-07-04 7:15 root
2017-07-03 7:15 root
2017-07-02 7:14 root
2017-07-01 7:15 root
2017-06-30 7:15 root
2017-06-29 7:15 root
2017-06-28 7:15 root
2017-06-27 7:15 root
2017-06-26 7:15 root
2017-06-25 7:15 root
2017-06-24 7:15 root
2017-06-23 7:15 root
2017-06-22 7:15 root
2017-06-21 7:15 root
2017-06-20 7:15 root
2017-06-19 7:15 root
2017-06-18 7:14 root
2017-04-10 7:15 root
2017-04-09 7:17 root
2017-04-08 7:17 root
2017-04-07 7:16 root
2017-04-06 7:16 root
2017-04-05 7:15 root
2017-04-04 7:15 root
2017-04-03 7:15 root
2017-04-02 7:15 root
2017-04-01 7:15 root
2017-03-31 7:15 root
2017-01-20 9:08 root
2017-01-19 8:15 root
2017-01-18 8:15 root
2017-01-17 8:15 root
2017-01-16 8:15 root
2017-01-15 8:15 root
2017-01-14 8:15 root
2017-01-13 8:14 root
2016-12-08 8:43 root
2016-12-07 8:19 root
2016-11-24 8:27 root
2016-11-23 17:32 root
2016-11-23 8:21 root
2016-11-17 8:44 root
2016-11-10 8:57 root
2016-11-09 9:25 root
2016-11-08 9:13 root
2016-11-07 11:39 root
2016-11-06 9:29 root
2016-11-06 7:36 root
2016-11-05 8:34 root
2016-11-04 10:51 root
2016-11-03 7:37 root
2016-11-02 7:41 root
2016-11-01 7:35 root
2016-10-31 7:35 root
2016-10-30 9:20 root
2016-10-29 7:51 root
2016-10-28 8:20 root
2016-10-27 7:31 root
2016-10-26 7:52 root
2016-10-25 8:51 root
2016-10-22 7:21 root
2016-10-21 7:26 root
2016-10-20 7:50 root
2016-10-19 7:50 root
2016-10-18 7:47 root
2016-10-17 7:31 root
2016-10-16 7:51 root
2016-10-15 7:36 root
2016-10-14 8:26 root
2016-10-13 7:31 root
2016-10-12 7:33 root
2016-10-11 7:36 root
2016-10-10 7:25 root
2016-10-09 8:07 root
2016-08-03 7:21 root
2016-05-29 9:20 root
2016-05-28 7:18 root
2016-05-04 7:17 root
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180409071657.BEFAF201C5@nightheron.gentoo.org \
--to=vapier@gentoo.org \
--cc=gentoo-releng-autobuilds@lists.gentoo.org \
--cc=releng@gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox