* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage2.spec
@ 2011-03-29 7:22 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2011-03-29 7:22 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /release/buildroot/x86-dev/tmp/default/.autoresume-stage2-i686-20110329/
clearing chroot ...
Emptying directory /release/buildroot/x86-dev/tmp/default/stage2-i686-20110329/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /release/buildroot/x86-dev/tmp/default/stage1-i686-20110329/tmp/stage1root/
to /release/buildroot/x86-dev/tmp/default/stage2-i686-20110329/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying stage2-chroot.sh to /release/buildroot/x86-dev/tmp/default/stage2-i686-20110329/tmp/
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/default/stage2-i686-20110329/tmp/
Running stage2-chroot.sh in chroot /release/buildroot/x86-dev/tmp/default/stage2-i686-20110329/
>>> Regenerating /etc/ld.so.cache...
Gentoo Linux; http://www.gentoo.org/
Copyright 1999-2010 Gentoo Foundation; Distributed under the GPLv2
-------------------------------------------------------------------------------
[[ (0/3) Locating packages ]]
* Using baselayout : sys-apps/baselayout
* Using portage : virtual/portage
* Using os-headers : >=sys-kernel/linux-headers-2.6.36.1
* Using binutils : sys-devel/binutils
* Using gcc : sys-devel/gcc
* Using gettext : gettext
* Using libc : virtual/libc
* Using texinfo : sys-apps/texinfo
* Using zlib : sys-libs/zlib
* Using ncurses : sys-libs/ncurses
-------------------------------------------------------------------------------
[[ (1/3) Configuring environment ]]
* GENTOO_MIRRORS="http://gentoo.osuosl.org/"
* PORTDIR="/usr/portage"
* DISTDIR="/usr/portage/distfiles"
* PKGDIR="/usr/portage/packages"
* PORTAGE_TMPDIR="/var/tmp"
* CFLAGS="-O2 -march=i686 -pipe"
* CHOST="i686-pc-linux-gnu"
* CXXFLAGS="-O2 -march=i686 -pipe"
* ACCEPT_KEYWORDS="x86"
* FEATURES="assume-digests binpkg-logs distlocks fixlafiles fixpackages news nodoc noinfo noman parallel-fetch protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch"
-------------------------------------------------------------------------------
[[ (2/3) Updating portage ]]
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
* IMPORTANT: 2 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.1.9.42
>>> Installing (1 of 1) sys-apps/portage-2.1.9.42
* IMPORTANT: 2 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
-------------------------------------------------------------------------------
[[ (3/3) Emerging packages ]]
* IMPORTANT: 2 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
>>> Verifying ebuild manifests
>>> Starting parallel fetch
>>> Emerging (1 of 9) app-arch/xz-utils-5.0.1
>>> Failed to emerge app-arch/xz-utils-5.0.1, Log file:
>>> '/var/tmp/portage/app-arch/xz-utils-5.0.1/temp/build.log'
* Package: app-arch/xz-utils-5.0.1
* Repository: gentoo
* USE: bootstrap elibc_glibc kernel_linux nls userland_GNU x86
* FEATURES: sandbox
XZ Utils 5.0.1
System type:
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
Configure options:
checking if debugging code should be compiled... no
checking which encoders to build... lzma1 lzma2 delta x86 powerpc ia64 arm armthumb sparc
checking which decoders to build... lzma1 lzma2 delta x86 powerpc ia64 arm armthumb sparc
checking which match finders to build... hc3 hc4 bt2 bt3 bt4
checking which integrity checks to build... crc32 crc64 sha256
checking if assembler optimizations should be used... x86
checking if small size is preferred over speed... no
checking if threading support is wanted... no
checking how much RAM to assume if the real amount is unknown... 128 MiB
checking for a shell that conforms to POSIX... /bin/sh
Initializing Automake:
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether ln -s works... yes
checking for style of include used by make... GNU
checking for i686-pc-linux-gnu-gcc... i686-pc-linux-gnu-gcc
checking whether the C compiler works... no
configure: error: in `/var/tmp/portage/app-arch/xz-utils-5.0.1/work/xz-5.0.1':
configure: error: C compiler cannot create executables
See `config.log' for more details
!!! Please attach the following file when seeking support:
!!! /var/tmp/portage/app-arch/xz-utils-5.0.1/work/xz-5.0.1/config.log
* ERROR: app-arch/xz-utils-5.0.1 failed (configure phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 56: Called src_configure
* environment, line 2204: Called econf '--enable-nls' '--disable-threads' '--disable-static'
* ebuild.sh, line 557: Called die
* The specific snippet of code:
* die "econf failed"
*
* If you need support, post the output of 'emerge --info =app-arch/xz-utils-5.0.1',
* the complete build log and the output of 'emerge -pqv =app-arch/xz-utils-5.0.1'.
* The complete build log is located at '/var/tmp/portage/app-arch/xz-utils-5.0.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-arch/xz-utils-5.0.1/temp/environment'.
* S: '/var/tmp/portage/app-arch/xz-utils-5.0.1/work/xz-5.0.1'
* Messages for package app-arch/xz-utils-5.0.1:
* ERROR: app-arch/xz-utils-5.0.1 failed (configure phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 56: Called src_configure
* environment, line 2204: Called econf '--enable-nls' '--disable-threads' '--disable-static'
* ebuild.sh, line 557: Called die
* The specific snippet of code:
* die "econf failed"
*
* If you need support, post the output of 'emerge --info =app-arch/xz-utils-5.0.1',
* the complete build log and the output of 'emerge -pqv =app-arch/xz-utils-5.0.1'.
* The complete build log is located at '/var/tmp/portage/app-arch/xz-utils-5.0.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-arch/xz-utils-5.0.1/temp/environment'.
* S: '/var/tmp/portage/app-arch/xz-utils-5.0.1/work/xz-5.0.1'
* IMPORTANT: 2 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1207, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1212, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage2
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/default/stage2-i686-20110329/.catalyst_lock'
Full build log at /tmp/catalyst-auto.27069/log/i686_stage2.log
^ permalink raw reply [flat|nested] 15+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage2.spec
@ 2011-09-06 8:26 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2011-09-06 8:26 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Setting snapshot_cache to default value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/release/buildroot/x86-dev"
Setting portdir to config file value "/release/trees/portage-auto"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "pkgcache metadata_overlay autoresume snapcache seedcache kerncache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Use of metadata_overlay module for portage enabled.
Envscript support enabled.
Using target: stage2
Building on amd64 for alternate personality type x86
Source path set to /release/buildroot/x86-dev/tmp/default/stage1-i686-20110906/tmp/stage1root/
If this is not desired, remove this directory or turn of seedcache in the options of catalyst.conf
the source path will then be /release/buildroot/x86-dev/builds/default/stage1-i686-20110906.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20110906/
The autoresume path is /release/buildroot/x86-dev/tmp/default/.autoresume-stage2-i686-20110906/
Location of the package cache is /release/buildroot/x86-dev/packages/default/stage2-i686-20110906/
Location of the kerncache is /release/buildroot/x86-dev/kerncache/default/stage2-i686-20110906/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /release/buildroot/x86-dev/tmp/default/.autoresume-stage2-i686-20110906/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /release/buildroot/x86-dev/tmp/default/.autoresume-stage2-i686-20110906/
clearing chroot ...
Emptying directory /release/buildroot/x86-dev/tmp/default/stage2-i686-20110906/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Starting rsync from /release/buildroot/x86-dev/tmp/default/stage1-i686-20110906/tmp/stage1root/
to /release/buildroot/x86-dev/tmp/default/stage2-i686-20110906/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying stage2-chroot.sh to /release/buildroot/x86-dev/tmp/default/stage2-i686-20110906/tmp/
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/default/stage2-i686-20110906/tmp/
Running stage2-chroot.sh in chroot /release/buildroot/x86-dev/tmp/default/stage2-i686-20110906/
>>> Regenerating /etc/ld.so.cache...
Gentoo Linux; http://www.gentoo.org/
Copyright 1999-2011 Gentoo Foundation; Distributed under the GPLv2
-------------------------------------------------------------------------------
[[ (0/3) Locating packages ]]
* Using baselayout : sys-apps/baselayout
* Using portage : portage
* Using os-headers : >=sys-kernel/linux-headers-2.6.36.1
* Using binutils : sys-devel/binutils
* Using gcc : sys-devel/gcc
* Using gettext : gettext
* Using libc : virtual/libc
* Using texinfo : sys-apps/texinfo
* Using zlib : sys-libs/zlib
* Using ncurses : sys-libs/ncurses
-------------------------------------------------------------------------------
[[ (1/3) Configuring environment ]]
-------------------------------------------------------------------------------
[[ (2/3) Updating portage ]]
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.1.10.11
>>> Installing (1 of 1) sys-apps/portage-2.1.10.11
-------------------------------------------------------------------------------
[[ (3/3) Emerging packages ]]
>>> Verifying ebuild manifests
>>> Starting parallel fetch
>>> Emerging (1 of 10) app-arch/xz-utils-5.0.3
>>> Failed to emerge app-arch/xz-utils-5.0.3, Log file:
>>> '/var/tmp/portage/app-arch/xz-utils-5.0.3/temp/build.log'
* Package: app-arch/xz-utils-5.0.3
* Repository: gentoo
* USE: bootstrap elibc_glibc kernel_linux nls userland_GNU x86
* FEATURES: sandbox
XZ Utils 5.0.3
System type:
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
Configure options:
checking if debugging code should be compiled... no
checking which encoders to build... lzma1 lzma2 delta x86 powerpc ia64 arm armthumb sparc
checking which decoders to build... lzma1 lzma2 delta x86 powerpc ia64 arm armthumb sparc
checking which match finders to build... hc3 hc4 bt2 bt3 bt4
checking which integrity checks to build... crc32 crc64 sha256
checking if assembler optimizations should be used... x86
checking if small size is preferred over speed... no
checking if threading support is wanted... no
checking how much RAM to assume if the real amount is unknown... 128 MiB
checking for a shell that conforms to POSIX... /bin/sh
Initializing Automake:
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether ln -s works... yes
checking for style of include used by make... GNU
checking for i686-pc-linux-gnu-gcc... i686-pc-linux-gnu-gcc
checking whether the C compiler works... no
configure: error: in `/var/tmp/portage/app-arch/xz-utils-5.0.3/work/xz-5.0.3':
configure: error: C compiler cannot create executables
See `config.log' for more details
!!! Please attach the following file when seeking support:
!!! /var/tmp/portage/app-arch/xz-utils-5.0.3/work/xz-5.0.3/config.log
* ERROR: app-arch/xz-utils-5.0.3 failed (configure phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 56: Called src_configure
* environment, line 2215: Called econf '--enable-nls' '--disable-threads' '--disable-static'
* ebuild.sh, line 561: Called die
* The specific snippet of code:
* die "econf failed"
*
* If you need support, post the output of 'emerge --info =app-arch/xz-utils-5.0.3',
* the complete build log and the output of 'emerge -pqv =app-arch/xz-utils-5.0.3'.
* The complete build log is located at '/var/tmp/portage/app-arch/xz-utils-5.0.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-arch/xz-utils-5.0.3/temp/environment'.
* S: '/var/tmp/portage/app-arch/xz-utils-5.0.3/work/xz-5.0.3'
* Messages for package app-arch/xz-utils-5.0.3:
* ERROR: app-arch/xz-utils-5.0.3 failed (configure phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 56: Called src_configure
* environment, line 2215: Called econf '--enable-nls' '--disable-threads' '--disable-static'
* ebuild.sh, line 561: Called die
* The specific snippet of code:
* die "econf failed"
*
* If you need support, post the output of 'emerge --info =app-arch/xz-utils-5.0.3',
* the complete build log and the output of 'emerge -pqv =app-arch/xz-utils-5.0.3'.
* The complete build log is located at '/var/tmp/portage/app-arch/xz-utils-5.0.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-arch/xz-utils-5.0.3/temp/environment'.
* S: '/var/tmp/portage/app-arch/xz-utils-5.0.3/work/xz-5.0.3'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1207, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1212, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage2
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/default/stage2-i686-20110906/.catalyst_lock'
Full build log at /tmp/catalyst-auto.32370/log/i686_stage2.log
^ permalink raw reply [flat|nested] 15+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage2.spec
@ 2014-11-05 5:34 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2014-11-05 5:34 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
checking assembler for working .subsection -1... yes
checking assembler for .weak... yes
checking assembler for .weakref... yes
checking assembler for .nsubspa comdat... no
checking assembler for .hidden... yes
checking linker for .hidden support... yes
checking linker read-only and read-write section mixing... read-write
checking for .preinit_array/.init_array/.fini_array support... yes
checking assembler for .sleb128 and .uleb128... yes
checking assembler for cfi directives... yes
checking assembler for working cfi advance... yes
checking assembler for cfi personality directive... yes
checking assembler for cfi sections directive... yes
checking assembler for eh_frame optimization... yes
checking assembler for section merging support... yes
checking assembler for COMDAT group support (GNU as)... yes
checking assembler for line table discriminator support... yes
checking assembler for thread-local storage support... yes
checking linker -Bstatic/-Bdynamic option... yes
checking linker --demangle support... yes
checking linker plugin support... 2
checking assembler for filds and fists mnemonics... yes
checking assembler for fildq and fistpq mnemonics... yes
checking assembler for cmov syntax... no
checking assembler for ffreep mnemonic... yes
checking assembler for .quad directive... yes
checking assembler for sahf mnemonic... yes
checking assembler for hle prefixes... yes
checking assembler for swap suffix... yes
checking assembler for different section symbol subtraction... yes
checking assembler for GOTOFF in data... yes
checking assembler for rep and lock prefix... yes
checking assembler for ud2 mnemonic... yes
checking assembler for R_386_TLS_GD_PLT reloc... no
checking assembler for R_386_TLS_LDM_PLT reloc... no
checking assembler for dwarf2 debug_line support... yes
checking assembler for buggy dwarf2 .file directive... no
checking assembler for --gdwarf2 option... yes
checking assembler for --gstabs option... yes
checking assembler for --debug-prefix-map option... yes
checking assembler for .lcomm with alignment... no
checking assembler for gnu_unique_object... yes
ldd (Gentoo 2.19-r1 p3) 2.19
Copyright (C) 2014 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Written by Roland McGrath and Ulrich Drepper.
checking assembler for tolerance to line number 0... yes
checking linker PT_GNU_EH_FRAME support... yes
checking linker position independent executable support... yes
checking linker EH-compatible garbage collection of sections... yes
checking linker EH garbage collection of sections bug... no
checking linker --as-needed support... yes
checking linker --build-id support... yes
checking linker *_sol2 emulation support... no
checking linker --sysroot support... yes
checking __stack_chk_fail in target C library... (cached) yes
checking sys/sdt.h in the target C library... no
checking dl_iterate_phdr in target C library... unknown
checking whether to enable maintainer-specific portions of Makefiles... no
Links are now set up to build a native compiler for i686-pc-linux-gnu.
checking for exported symbols... yes
checking for -rdynamic... yes
checking for library containing dlopen... -ldl
checking for -fPIC -shared... yes
configure: updating cache ./config.cache
configure: creating ./config.status
config.status: creating as
config.status: creating collect-ld
config.status: creating nm
config.status: creating Makefile
config.status: creating ada/gcc-interface/Makefile
config.status: creating ada/Makefile
config.status: creating auto-host.h
config.status: executing default commands
make[3]: Entering directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/gcc'
TARGET_CPU_DEFAULT="" \
HEADERS="auto-host.h ansidecl.h" DEFINES="" \
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/mkconfig.sh config.h
i686-pc-linux-gnu-g++ -c -DEFAULT_SSP -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -DGENERATOR_FILE -I. -Ibuild -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/build -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include \
-DBASEVER="\"4.8.3\"" -DDATESTAMP="\"\"" \
-DREVISION="\"\"" \
-DDEVPHASE="\"\"" -DPKGVERSION="\"(Gentoo 4.8.3 p1.1, pie-0.5.9) \"" \
-DBUGURL="\"<https://bugs.gentoo.org/>\"" -o build/version.o /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/version.c
rm -f tmp-all-tree.def
echo '#include "tree.def"' > tmp-all-tree.def
echo 'END_OF_BASE_TREE_CODES' >> tmp-all-tree.def
echo '#include "c-family/c-common.def"' >> tmp-all-tree.def
ltf="/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/ada/gcc-interface/ada-tree.def /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/cp/cp-tree.def /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/java/java-tree.def /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/objc/objc-tree.def"; for f in $ltf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/||' >> tmp-all-tree.def
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-all-tree.def all-tree.def
echo timestamp > s-alltree
lsf="/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/cp/lang-specs.h /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/lto/lang-specs.h"; for f in $lsf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/||' > tmp-specs.h
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-specs.h specs.h
echo timestamp > s-specs
echo "i686-pc-linux-gnu-g++ -DEFAULT_SSP -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -static-libstdc++ -static-libgcc -Wl,-O1 -Wl,--as-needed" > checksum-options.tmp \
&& /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change checksum-options.tmp checksum-options
gawk -f /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/config/i386/i386-builtin-types.awk /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/config/i386/i386-builtin-types.def > tmp-bt.inc
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-bt.inc i386-builtin-types.inc
echo timestamp > s-i386-bt
cp /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c gcc-nm.c
cp /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c gcc-ranlib.c
rm -f mm_malloc.h
cat /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/config/i386/pmm_malloc.h > mm_malloc.h
TARGET_CPU_DEFAULT="" \
HEADERS="auto-host.h ansidecl.h" DEFINES="USED_FOR_TARGET " \
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/mkconfig.sh tconfig.h
(echo "@set version-GCC 4.8.3"; \
if [ "" = "experimental" ]; \
then echo "@set DEVELOPMENT"; \
else echo "@clear DEVELOPMENT"; \
fi) > gcc-vers.texiT
echo @set srcdir /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc >> gcc-vers.texiT
if [ -n "(Gentoo 4.8.3 p1.1, pie-0.5.9) " ]; then \
echo "@set VERSION_PACKAGE (Gentoo 4.8.3 p1.1, pie-0.5.9) " >> gcc-vers.texiT; \
fi
echo "@set BUGURL @uref{https://bugs.gentoo.org/}" >> gcc-vers.texiT; \
mv -f gcc-vers.texiT gcc-vers.texi
echo timestamp > gpl.pod
perl /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../contrib/texi2pod.pl /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/doc/include/gpl_v3.texi > gpl.pod
i686-pc-linux-gnu-g++ -c -DEFAULT_SSP -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\" -DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"i686-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/i686-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"i686-pc-linux-gnu\" -DPERSONALITY=\"ar\" -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/wo
rk/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c -o gcc-ar.o
i686-pc-linux-gnu-g++ -c -DEFAULT_SSP -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\" -DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"i686-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/i686-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"i686-pc-linux-gnu\" -DPERSONALITY=\"nm\" -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/wo
rk/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace gcc-nm.c -o gcc-nm.o
i686-pc-linux-gnu-g++ -c -DEFAULT_SSP -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\" -DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"i686-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/i686-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"i686-pc-linux-gnu\" -DPERSONALITY=\"ranlib\" -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.
3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace gcc-ranlib.c -o gcc-ranlib.o
i686-pc-linux-gnu-g++ -c -DEFAULT_SSP -DGENERATOR_FILE -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gengtype.c -o gengtype.o
/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gengtype.c:21:21: fatal error: bconfig.h: No such file or directory
#include "bconfig.h"
^
compilation terminated.
Makefile:1070: recipe for target 'gengtype.o' failed
make[3]: *** [gengtype.o] Error 1
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/gcc'
Makefile:4152: recipe for target 'all-stage1-gcc' failed
make[2]: *** [all-stage1-gcc] Error 2
make[2]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
Makefile:16150: recipe for target 'stage1-bubble' failed
make[1]: *** [stage1-bubble] Error 2
make[1]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
Makefile:16465: recipe for target 'bootstrap-lean' failed
make: *** [bootstrap-lean] Error 2
* ERROR: sys-devel/gcc-4.8.3::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-build-logs.tar.bz2 in your bug report.
*
* Messages for package sys-apps/baselayout-2.2:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package sys-devel/gcc-4.8.3:
* ERROR: sys-devel/gcc-4.8.3::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-build-logs.tar.bz2 in your bug report.
*
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage2
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/default/stage2-i686-20141105/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.xRHw33/log/i686_stage2.log
^ permalink raw reply [flat|nested] 15+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage2.spec
@ 2014-11-26 5:49 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2014-11-26 5:49 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
checking assembler for working .subsection -1... yes
checking assembler for .weak... yes
checking assembler for .weakref... yes
checking assembler for .nsubspa comdat... no
checking assembler for .hidden... yes
checking linker for .hidden support... yes
checking linker read-only and read-write section mixing... read-write
checking for .preinit_array/.init_array/.fini_array support... yes
checking assembler for .sleb128 and .uleb128... yes
checking assembler for cfi directives... yes
checking assembler for working cfi advance... yes
checking assembler for cfi personality directive... yes
checking assembler for cfi sections directive... yes
checking assembler for eh_frame optimization... yes
checking assembler for section merging support... yes
checking assembler for COMDAT group support (GNU as)... yes
checking assembler for line table discriminator support... yes
checking assembler for thread-local storage support... yes
checking linker -Bstatic/-Bdynamic option... yes
checking linker --demangle support... yes
checking linker plugin support... 2
checking assembler for filds and fists mnemonics... yes
checking assembler for fildq and fistpq mnemonics... yes
checking assembler for cmov syntax... no
checking assembler for ffreep mnemonic... yes
checking assembler for .quad directive... yes
checking assembler for sahf mnemonic... yes
checking assembler for hle prefixes... yes
checking assembler for swap suffix... yes
checking assembler for different section symbol subtraction... yes
checking assembler for GOTOFF in data... yes
checking assembler for rep and lock prefix... yes
checking assembler for ud2 mnemonic... yes
checking assembler for R_386_TLS_GD_PLT reloc... no
checking assembler for R_386_TLS_LDM_PLT reloc... no
checking assembler for dwarf2 debug_line support... yes
checking assembler for buggy dwarf2 .file directive... no
checking assembler for --gdwarf2 option... yes
checking assembler for --gstabs option... yes
checking assembler for --debug-prefix-map option... yes
checking assembler for .lcomm with alignment... no
checking assembler for gnu_unique_object... yes
ldd (Gentoo 2.19-r1 p3) 2.19
Copyright (C) 2014 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Written by Roland McGrath and Ulrich Drepper.
checking assembler for tolerance to line number 0... yes
checking linker PT_GNU_EH_FRAME support... yes
checking linker position independent executable support... yes
checking linker EH-compatible garbage collection of sections... yes
checking linker EH garbage collection of sections bug... no
checking linker --as-needed support... yes
checking linker --build-id support... yes
checking linker *_sol2 emulation support... no
checking linker --sysroot support... yes
checking __stack_chk_fail in target C library... (cached) yes
checking sys/sdt.h in the target C library... no
checking dl_iterate_phdr in target C library... unknown
checking whether to enable maintainer-specific portions of Makefiles... no
Links are now set up to build a native compiler for i686-pc-linux-gnu.
checking for exported symbols... yes
checking for -rdynamic... yes
checking for library containing dlopen... -ldl
checking for -fPIC -shared... yes
configure: updating cache ./config.cache
configure: creating ./config.status
config.status: creating as
config.status: creating collect-ld
config.status: creating nm
config.status: creating Makefile
config.status: creating ada/gcc-interface/Makefile
config.status: creating ada/Makefile
config.status: creating auto-host.h
config.status: executing default commands
make[3]: Entering directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/gcc'
TARGET_CPU_DEFAULT="" \
HEADERS="auto-host.h ansidecl.h" DEFINES="" \
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/mkconfig.sh config.h
i686-pc-linux-gnu-g++ -c -DEFAULT_SSP -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -DGENERATOR_FILE -I. -Ibuild -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/build -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include \
-DBASEVER="\"4.8.3\"" -DDATESTAMP="\"\"" \
-DREVISION="\"\"" \
-DDEVPHASE="\"\"" -DPKGVERSION="\"(Gentoo 4.8.3 p1.1, pie-0.5.9) \"" \
-DBUGURL="\"<https://bugs.gentoo.org/>\"" -o build/version.o /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/version.c
rm -f tmp-all-tree.def
echo '#include "tree.def"' > tmp-all-tree.def
echo 'END_OF_BASE_TREE_CODES' >> tmp-all-tree.def
echo '#include "c-family/c-common.def"' >> tmp-all-tree.def
ltf="/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/ada/gcc-interface/ada-tree.def /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/cp/cp-tree.def /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/java/java-tree.def /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/objc/objc-tree.def"; for f in $ltf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/||' >> tmp-all-tree.def
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-all-tree.def all-tree.def
echo timestamp > s-alltree
lsf="/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/cp/lang-specs.h /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/lto/lang-specs.h"; for f in $lsf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/||' > tmp-specs.h
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-specs.h specs.h
echo timestamp > s-specs
echo "i686-pc-linux-gnu-g++ -DEFAULT_SSP -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -static-libstdc++ -static-libgcc -Wl,-O1 -Wl,--as-needed" > checksum-options.tmp \
&& /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change checksum-options.tmp checksum-options
gawk -f /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/config/i386/i386-builtin-types.awk /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/config/i386/i386-builtin-types.def > tmp-bt.inc
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-bt.inc i386-builtin-types.inc
echo timestamp > s-i386-bt
cp /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c gcc-nm.c
cp /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c gcc-ranlib.c
rm -f mm_malloc.h
cat /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/config/i386/pmm_malloc.h > mm_malloc.h
TARGET_CPU_DEFAULT="" \
HEADERS="auto-host.h ansidecl.h" DEFINES="USED_FOR_TARGET " \
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/mkconfig.sh tconfig.h
(echo "@set version-GCC 4.8.3"; \
if [ "" = "experimental" ]; \
then echo "@set DEVELOPMENT"; \
else echo "@clear DEVELOPMENT"; \
fi) > gcc-vers.texiT
echo @set srcdir /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc >> gcc-vers.texiT
if [ -n "(Gentoo 4.8.3 p1.1, pie-0.5.9) " ]; then \
echo "@set VERSION_PACKAGE (Gentoo 4.8.3 p1.1, pie-0.5.9) " >> gcc-vers.texiT; \
fi
echo "@set BUGURL @uref{https://bugs.gentoo.org/}" >> gcc-vers.texiT; \
mv -f gcc-vers.texiT gcc-vers.texi
echo timestamp > gpl.pod
perl /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../contrib/texi2pod.pl /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/doc/include/gpl_v3.texi > gpl.pod
i686-pc-linux-gnu-g++ -c -DEFAULT_SSP -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\" -DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"i686-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/i686-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"i686-pc-linux-gnu\" -DPERSONALITY=\"ar\" -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/wo
rk/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c -o gcc-ar.o
i686-pc-linux-gnu-g++ -c -DEFAULT_SSP -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\" -DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"i686-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/i686-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"i686-pc-linux-gnu\" -DPERSONALITY=\"nm\" -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/wo
rk/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace gcc-nm.c -o gcc-nm.o
i686-pc-linux-gnu-g++ -c -DEFAULT_SSP -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\" -DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"i686-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/i686-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"i686-pc-linux-gnu\" -DPERSONALITY=\"ranlib\" -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.
3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace gcc-ranlib.c -o gcc-ranlib.o
i686-pc-linux-gnu-g++ -c -DEFAULT_SSP -DGENERATOR_FILE -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gengtype.c -o gengtype.o
/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gengtype.c:21:21: fatal error: bconfig.h: No such file or directory
#include "bconfig.h"
^
compilation terminated.
Makefile:1070: recipe for target 'gengtype.o' failed
make[3]: *** [gengtype.o] Error 1
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/gcc'
Makefile:4152: recipe for target 'all-stage1-gcc' failed
make[2]: *** [all-stage1-gcc] Error 2
make[2]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
Makefile:16150: recipe for target 'stage1-bubble' failed
make[1]: *** [stage1-bubble] Error 2
make[1]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
Makefile:16465: recipe for target 'bootstrap-lean' failed
make: *** [bootstrap-lean] Error 2
* ERROR: sys-devel/gcc-4.8.3::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-build-logs.tar.bz2 in your bug report.
*
* Messages for package sys-apps/baselayout-2.2:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package sys-devel/gcc-4.8.3:
* ERROR: sys-devel/gcc-4.8.3::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-build-logs.tar.bz2 in your bug report.
*
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage2
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/default/stage2-i686-20141126/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.sWBQgf/log/i686_stage2.log
^ permalink raw reply [flat|nested] 15+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage2.spec
@ 2015-06-19 4:36 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2015-06-19 4:36 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
checking assembler for different section symbol subtraction... yes
checking assembler for GOTOFF in data... yes
checking assembler for rep and lock prefix... yes
checking assembler for ud2 mnemonic... yes
checking assembler for R_386_TLS_GD_PLT reloc... no
checking assembler for R_386_TLS_LDM_PLT reloc... no
checking assembler for dwarf2 debug_line support... yes
checking assembler for buggy dwarf2 .file directive... no
checking assembler for --gdwarf2 option... yes
checking assembler for --gstabs option... yes
checking assembler for --debug-prefix-map option... yes
checking assembler for .lcomm with alignment... no
checking assembler for gnu_unique_object... yes
ldd (Gentoo 2.20-r2 p4) 2.20
Copyright (C) 2014 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Written by Roland McGrath and Ulrich Drepper.
checking assembler for tolerance to line number 0... yes
checking linker PT_GNU_EH_FRAME support... yes
checking linker position independent executable support... yes
checking linker EH-compatible garbage collection of sections... yes
checking linker EH garbage collection of sections bug... no
checking linker --as-needed support... yes
checking linker --build-id support... yes
checking linker *_sol2 emulation support... no
checking linker --sysroot support... yes
checking __stack_chk_fail in target C library... (cached) yes
checking sys/sdt.h in the target C library... no
checking dl_iterate_phdr in target C library... unknown
checking whether to enable maintainer-specific portions of Makefiles... no
Links are now set up to build a native compiler for i686-pc-linux-gnu.
checking for exported symbols... yes
checking for -rdynamic... yes
checking for library containing dlopen... -ldl
checking for -fPIC -shared... yes
configure: updating cache ./config.cache
configure: creating ./config.status
config.status: creating as
config.status: creating collect-ld
config.status: creating nm
config.status: creating Makefile
config.status: creating ada/gcc-interface/Makefile
config.status: creating ada/Makefile
config.status: creating auto-host.h
config.status: executing default commands
make[3]: Entering directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/gcc'
gawk -f /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/opt-gather.awk /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/ada/gcc-interface/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/fortran/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/go/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/java/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/lto/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/c-family/c.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/common.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/fused-madd.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/gnu-user.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/linux.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/linux-android.opt > tmp-optionlist
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-optionlist optionlist
echo timestamp > s-options
TARGET_CPU_DEFAULT="" \
HEADERS="config/i386/i386-protos.h tm-preds.h" DEFINES="" \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/mkconfig.sh tm_p.h
rm -f tmp-all-tree.def
echo '#include "tree.def"' > tmp-all-tree.def
echo 'END_OF_BASE_TREE_CODES' >> tmp-all-tree.def
echo '#include "c-family/c-common.def"' >> tmp-all-tree.def
ltf="/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/ada/gcc-interface/ada-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/cp/cp-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/java/java-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/objc/objc-tree.def"; for f in $ltf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/||' >> tmp-all-tree.def
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-all-tree.def all-tree.def
echo timestamp > s-alltree
if test no = yes \
|| test -n "m64=../lib64 m32=../lib mx32=../libx32"; then \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/genmultilib \
"m64/m32" \
" 64 32" \
"" \
"" \
"" \
"" \
"m64=../lib64 m32=../lib mx32=../libx32" \
"" \
"" \
"" \
"no" \
> tmp-mlib.h; \
else \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/genmultilib '' '' '' '' '' '' '' '' \
"" '' no \
> tmp-mlib.h; \
fi
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-mlib.h multilib.h
echo timestamp > s-mlib
lsf="/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/cp/lang-specs.h /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/lto/lang-specs.h"; for f in $lsf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/||' > tmp-specs.h
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-specs.h specs.h
echo timestamp > s-specs
echo "/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/ -B/usr/i686-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/i686-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -DEFAULT_SSP -O2 -march=i686 -pipe -gtoggle -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrit
e-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -static-libstdc++ -static-libgcc " > checksum-options.tmp \
&& /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change checksum-options.tmp checksum-options
gawk -f /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386-builtin-types.awk /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386-builtin-types.def > tmp-bt.inc
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-bt.inc i386-builtin-types.inc
echo timestamp > s-i386-bt
cp /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gcc-ar.c gcc-nm.c
cp /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gcc-ar.c gcc-ranlib.c
/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/ -B/usr/i686-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/i686-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -c -DEFAULT_SSP -DHOST_GENERATOR_FILE -O2 -march=i686 -pipe -gtoggle -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wn
o-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c -o gengtype.o
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:0:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:500:34: error: declaration of C function 'const char* strsignal(int)' conflicts with
extern const char *strsignal (int);
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/cstring:42:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:205,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/usr/include/string.h:563:14: error: previous declaration 'char* strsignal(int)' here
extern char *strsignal (int __sig) __THROW;
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:645:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include/libiberty.h:110:36: error: new declaration 'char* basename(const char*)'
extern char *basename (const char *);
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/cstring:42:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:205,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/usr/include/string.h:600:26: error: ambiguates old declaration 'const char* basename(const char*)'
extern "C++" const char *basename (const char *__filename)
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:0:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:289:56: error: 'CHAR_BIT' was not declared in this scope
? ~ (t) 0 << (sizeof(t) * CHAR_BIT - 1) : (t) 0))
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:290:44: note: in expansion of macro 'INTTYPE_MINIMUM'
#define INTTYPE_MAXIMUM(t) ((t) (~ (t) 0 - INTTYPE_MINIMUM (t)))
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:294:20: note: in expansion of macro 'INTTYPE_MAXIMUM'
# define UCHAR_MAX INTTYPE_MAXIMUM (unsigned char)
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.h:455:23: note: in expansion of macro 'UCHAR_MAX'
CHAR_TOKEN_OFFSET = UCHAR_MAX + 1,
^
Makefile:1070: recipe for target 'gengtype.o' failed
make[3]: *** [gengtype.o] Error 1
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/gcc'
Makefile:4192: recipe for target 'all-stage2-gcc' failed
make[2]: *** [all-stage2-gcc] Error 2
make[2]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
Makefile:16259: recipe for target 'stage2-bubble' failed
make[1]: *** [stage2-bubble] Error 2
make[1]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
Makefile:16465: recipe for target 'bootstrap-lean' failed
make: *** [bootstrap-lean] Error 2
* ERROR: sys-devel/gcc-4.8.4::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.4::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-build-logs.tar.bz2 in your bug report.
*
* Messages for package sys-apps/baselayout-2.2:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package sys-devel/gcc-4.8.4:
* ERROR: sys-devel/gcc-4.8.4::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.4::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-build-logs.tar.bz2 in your bug report.
*
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1253, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1333, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1258, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage2
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/default/stage2-i686-20150619/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.HFJ99O/log/i686_stage2.log
^ permalink raw reply [flat|nested] 15+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage2.spec
@ 2015-07-01 5:02 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2015-07-01 5:02 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
checking assembler for different section symbol subtraction... yes
checking assembler for GOTOFF in data... yes
checking assembler for rep and lock prefix... yes
checking assembler for ud2 mnemonic... yes
checking assembler for R_386_TLS_GD_PLT reloc... no
checking assembler for R_386_TLS_LDM_PLT reloc... no
checking assembler for dwarf2 debug_line support... yes
checking assembler for buggy dwarf2 .file directive... no
checking assembler for --gdwarf2 option... yes
checking assembler for --gstabs option... yes
checking assembler for --debug-prefix-map option... yes
checking assembler for .lcomm with alignment... no
checking assembler for gnu_unique_object... yes
ldd (Gentoo 2.20-r2 p4) 2.20
Copyright (C) 2014 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Written by Roland McGrath and Ulrich Drepper.
checking assembler for tolerance to line number 0... yes
checking linker PT_GNU_EH_FRAME support... yes
checking linker position independent executable support... yes
checking linker EH-compatible garbage collection of sections... yes
checking linker EH garbage collection of sections bug... no
checking linker --as-needed support... yes
checking linker --build-id support... yes
checking linker *_sol2 emulation support... no
checking linker --sysroot support... yes
checking __stack_chk_fail in target C library... (cached) yes
checking sys/sdt.h in the target C library... no
checking dl_iterate_phdr in target C library... unknown
checking whether to enable maintainer-specific portions of Makefiles... no
Links are now set up to build a native compiler for i686-pc-linux-gnu.
checking for exported symbols... yes
checking for -rdynamic... yes
checking for library containing dlopen... -ldl
checking for -fPIC -shared... yes
configure: updating cache ./config.cache
configure: creating ./config.status
config.status: creating as
config.status: creating collect-ld
config.status: creating nm
config.status: creating Makefile
config.status: creating ada/gcc-interface/Makefile
config.status: creating ada/Makefile
config.status: creating auto-host.h
config.status: executing default commands
make[3]: Entering directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/gcc'
gawk -f /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/opt-gather.awk /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/ada/gcc-interface/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/fortran/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/go/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/java/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/lto/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/c-family/c.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/common.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/fused-madd.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/gnu-user.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/linux.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/linux-android.opt > tmp-optionlist
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-optionlist optionlist
echo timestamp > s-options
TARGET_CPU_DEFAULT="" \
HEADERS="config/i386/i386-protos.h tm-preds.h" DEFINES="" \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/mkconfig.sh tm_p.h
rm -f tmp-all-tree.def
echo '#include "tree.def"' > tmp-all-tree.def
echo 'END_OF_BASE_TREE_CODES' >> tmp-all-tree.def
echo '#include "c-family/c-common.def"' >> tmp-all-tree.def
ltf="/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/ada/gcc-interface/ada-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/cp/cp-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/java/java-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/objc/objc-tree.def"; for f in $ltf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/||' >> tmp-all-tree.def
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-all-tree.def all-tree.def
echo timestamp > s-alltree
if test no = yes \
|| test -n "m64=../lib64 m32=../lib mx32=../libx32"; then \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/genmultilib \
"m64/m32" \
" 64 32" \
"" \
"" \
"" \
"" \
"m64=../lib64 m32=../lib mx32=../libx32" \
"" \
"" \
"" \
"no" \
> tmp-mlib.h; \
else \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/genmultilib '' '' '' '' '' '' '' '' \
"" '' no \
> tmp-mlib.h; \
fi
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-mlib.h multilib.h
echo timestamp > s-mlib
lsf="/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/cp/lang-specs.h /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/lto/lang-specs.h"; for f in $lsf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/||' > tmp-specs.h
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-specs.h specs.h
echo timestamp > s-specs
echo "/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/ -B/usr/i686-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/i686-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -DEFAULT_SSP -O2 -march=i686 -pipe -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings
-Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -static-libstdc++ -static-libgcc " > checksum-options.tmp \
&& /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change checksum-options.tmp checksum-options
gawk -f /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386-builtin-types.awk /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386-builtin-types.def > tmp-bt.inc
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-bt.inc i386-builtin-types.inc
echo timestamp > s-i386-bt
cp /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gcc-ar.c gcc-nm.c
cp /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gcc-ar.c gcc-ranlib.c
/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/ -B/usr/i686-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/i686-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -c -DEFAULT_SSP -DHOST_GENERATOR_FILE -O2 -march=i686 -pipe -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowi
ng -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c -o gengtype.o
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:0:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:500:34: error: declaration of C function 'const char* strsignal(int)' conflicts with
extern const char *strsignal (int);
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/cstring:42:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:205,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/usr/include/string.h:563:14: error: previous declaration 'char* strsignal(int)' here
extern char *strsignal (int __sig) __THROW;
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:645:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include/libiberty.h:110:36: error: new declaration 'char* basename(const char*)'
extern char *basename (const char *);
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/cstring:42:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:205,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/usr/include/string.h:600:26: error: ambiguates old declaration 'const char* basename(const char*)'
extern "C++" const char *basename (const char *__filename)
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:0:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:289:56: error: 'CHAR_BIT' was not declared in this scope
? ~ (t) 0 << (sizeof(t) * CHAR_BIT - 1) : (t) 0))
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:290:44: note: in expansion of macro 'INTTYPE_MINIMUM'
#define INTTYPE_MAXIMUM(t) ((t) (~ (t) 0 - INTTYPE_MINIMUM (t)))
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:294:20: note: in expansion of macro 'INTTYPE_MAXIMUM'
# define UCHAR_MAX INTTYPE_MAXIMUM (unsigned char)
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.h:455:23: note: in expansion of macro 'UCHAR_MAX'
CHAR_TOKEN_OFFSET = UCHAR_MAX + 1,
^
Makefile:1070: recipe for target 'gengtype.o' failed
make[3]: *** [gengtype.o] Error 1
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/gcc'
Makefile:4231: recipe for target 'all-stage3-gcc' failed
make[2]: *** [all-stage3-gcc] Error 2
make[2]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
Makefile:16391: recipe for target 'stage3-bubble' failed
make[1]: *** [stage3-bubble] Error 2
make[1]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
Makefile:16465: recipe for target 'bootstrap-lean' failed
make: *** [bootstrap-lean] Error 2
* ERROR: sys-devel/gcc-4.8.4::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.4::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-build-logs.tar.bz2 in your bug report.
*
* Messages for package sys-apps/baselayout-2.2:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package sys-devel/gcc-4.8.4:
* ERROR: sys-devel/gcc-4.8.4::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.4::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-build-logs.tar.bz2 in your bug report.
*
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1253, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1333, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1258, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage2
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/default/stage2-i686-20150701/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.zjq1nh/log/i686_stage2.log
^ permalink raw reply [flat|nested] 15+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage2.spec
@ 2015-07-29 7:33 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2015-07-29 7:33 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
checking assembler for different section symbol subtraction... yes
checking assembler for GOTOFF in data... yes
checking assembler for rep and lock prefix... yes
checking assembler for ud2 mnemonic... yes
checking assembler for R_386_TLS_GD_PLT reloc... no
checking assembler for R_386_TLS_LDM_PLT reloc... no
checking assembler for dwarf2 debug_line support... yes
checking assembler for buggy dwarf2 .file directive... no
checking assembler for --gdwarf2 option... yes
checking assembler for --gstabs option... yes
checking assembler for --debug-prefix-map option... yes
checking assembler for .lcomm with alignment... no
checking assembler for gnu_unique_object... yes
ldd (Gentoo 2.20-r2 p5) 2.20
Copyright (C) 2014 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Written by Roland McGrath and Ulrich Drepper.
checking assembler for tolerance to line number 0... yes
checking linker PT_GNU_EH_FRAME support... yes
checking linker position independent executable support... yes
checking linker EH-compatible garbage collection of sections... yes
checking linker EH garbage collection of sections bug... no
checking linker --as-needed support... yes
checking linker --build-id support... yes
checking linker *_sol2 emulation support... no
checking linker --sysroot support... yes
checking __stack_chk_fail in target C library... (cached) yes
checking sys/sdt.h in the target C library... no
checking dl_iterate_phdr in target C library... unknown
checking whether to enable maintainer-specific portions of Makefiles... no
Links are now set up to build a native compiler for i686-pc-linux-gnu.
checking for exported symbols... yes
checking for -rdynamic... yes
checking for library containing dlopen... -ldl
checking for -fPIC -shared... yes
configure: updating cache ./config.cache
configure: creating ./config.status
config.status: creating as
config.status: creating collect-ld
config.status: creating nm
config.status: creating Makefile
config.status: creating ada/gcc-interface/Makefile
config.status: creating ada/Makefile
config.status: creating auto-host.h
config.status: executing default commands
make[3]: Entering directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/gcc'
gawk -f /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/opt-gather.awk /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/ada/gcc-interface/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/fortran/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/go/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/java/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/lto/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/c-family/c.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/common.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/fused-madd.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/gnu-user.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/linux.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/linux-android.opt > tmp-optionlist
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-optionlist optionlist
echo timestamp > s-options
TARGET_CPU_DEFAULT="" \
HEADERS="config/i386/i386-protos.h tm-preds.h" DEFINES="" \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/mkconfig.sh tm_p.h
rm -f tmp-all-tree.def
echo '#include "tree.def"' > tmp-all-tree.def
echo 'END_OF_BASE_TREE_CODES' >> tmp-all-tree.def
echo '#include "c-family/c-common.def"' >> tmp-all-tree.def
ltf="/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/ada/gcc-interface/ada-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/cp/cp-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/java/java-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/objc/objc-tree.def"; for f in $ltf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/||' >> tmp-all-tree.def
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-all-tree.def all-tree.def
echo timestamp > s-alltree
if test no = yes \
|| test -n "m64=../lib64 m32=../lib mx32=../libx32"; then \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/genmultilib \
"m64/m32" \
" 64 32" \
"" \
"" \
"" \
"" \
"m64=../lib64 m32=../lib mx32=../libx32" \
"" \
"" \
"" \
"no" \
> tmp-mlib.h; \
else \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/genmultilib '' '' '' '' '' '' '' '' \
"" '' no \
> tmp-mlib.h; \
fi
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-mlib.h multilib.h
echo timestamp > s-mlib
lsf="/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/cp/lang-specs.h /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/lto/lang-specs.h"; for f in $lsf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/||' > tmp-specs.h
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-specs.h specs.h
echo timestamp > s-specs
echo "/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/ -B/usr/i686-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/i686-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -DEFAULT_SSP -O2 -march=i686 -pipe -gtoggle -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrit
e-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -static-libstdc++ -static-libgcc " > checksum-options.tmp \
&& /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change checksum-options.tmp checksum-options
gawk -f /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386-builtin-types.awk /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386-builtin-types.def > tmp-bt.inc
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-bt.inc i386-builtin-types.inc
echo timestamp > s-i386-bt
cp /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gcc-ar.c gcc-nm.c
cp /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gcc-ar.c gcc-ranlib.c
/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/ -B/usr/i686-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/i686-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -c -DEFAULT_SSP -DHOST_GENERATOR_FILE -O2 -march=i686 -pipe -gtoggle -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wn
o-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c -o gengtype.o
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:0:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:500:34: error: declaration of C function 'const char* strsignal(int)' conflicts with
extern const char *strsignal (int);
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/cstring:42:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:205,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/usr/include/string.h:563:14: error: previous declaration 'char* strsignal(int)' here
extern char *strsignal (int __sig) __THROW;
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:645:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include/libiberty.h:110:36: error: new declaration 'char* basename(const char*)'
extern char *basename (const char *);
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/cstring:42:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:205,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/usr/include/string.h:600:26: error: ambiguates old declaration 'const char* basename(const char*)'
extern "C++" const char *basename (const char *__filename)
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:0:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:289:56: error: 'CHAR_BIT' was not declared in this scope
? ~ (t) 0 << (sizeof(t) * CHAR_BIT - 1) : (t) 0))
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:290:44: note: in expansion of macro 'INTTYPE_MINIMUM'
#define INTTYPE_MAXIMUM(t) ((t) (~ (t) 0 - INTTYPE_MINIMUM (t)))
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:294:20: note: in expansion of macro 'INTTYPE_MAXIMUM'
# define UCHAR_MAX INTTYPE_MAXIMUM (unsigned char)
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.h:455:23: note: in expansion of macro 'UCHAR_MAX'
CHAR_TOKEN_OFFSET = UCHAR_MAX + 1,
^
Makefile:1070: recipe for target 'gengtype.o' failed
make[3]: *** [gengtype.o] Error 1
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/gcc'
Makefile:4192: recipe for target 'all-stage2-gcc' failed
make[2]: *** [all-stage2-gcc] Error 2
make[2]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
Makefile:16259: recipe for target 'stage2-bubble' failed
make[1]: *** [stage2-bubble] Error 2
make[1]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
Makefile:16465: recipe for target 'bootstrap-lean' failed
make: *** [bootstrap-lean] Error 2
* ERROR: sys-devel/gcc-4.8.4::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.4::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-build-logs.tar.bz2 in your bug report.
*
* Messages for package sys-apps/baselayout-2.2:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package sys-devel/gcc-4.8.4:
* ERROR: sys-devel/gcc-4.8.4::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.4::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-build-logs.tar.bz2 in your bug report.
*
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1253, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1333, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1258, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage2
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/default/stage2-i686-20150729/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.rR35es/log/i686_stage2.log
^ permalink raw reply [flat|nested] 15+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage2.spec
@ 2015-08-12 9:20 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2015-08-12 9:20 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
checking assembler for different section symbol subtraction... yes
checking assembler for GOTOFF in data... yes
checking assembler for rep and lock prefix... yes
checking assembler for ud2 mnemonic... yes
checking assembler for R_386_TLS_GD_PLT reloc... no
checking assembler for R_386_TLS_LDM_PLT reloc... no
checking assembler for dwarf2 debug_line support... yes
checking assembler for buggy dwarf2 .file directive... no
checking assembler for --gdwarf2 option... yes
checking assembler for --gstabs option... yes
checking assembler for --debug-prefix-map option... yes
checking assembler for .lcomm with alignment... no
checking assembler for gnu_unique_object... yes
ldd (Gentoo 2.20-r2 p5) 2.20
Copyright (C) 2014 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Written by Roland McGrath and Ulrich Drepper.
checking assembler for tolerance to line number 0... yes
checking linker PT_GNU_EH_FRAME support... yes
checking linker position independent executable support... yes
checking linker EH-compatible garbage collection of sections... yes
checking linker EH garbage collection of sections bug... no
checking linker --as-needed support... yes
checking linker --build-id support... yes
checking linker *_sol2 emulation support... no
checking linker --sysroot support... yes
checking __stack_chk_fail in target C library... (cached) yes
checking sys/sdt.h in the target C library... no
checking dl_iterate_phdr in target C library... unknown
checking whether to enable maintainer-specific portions of Makefiles... no
Links are now set up to build a native compiler for i686-pc-linux-gnu.
checking for exported symbols... yes
checking for -rdynamic... yes
checking for library containing dlopen... -ldl
checking for -fPIC -shared... yes
configure: updating cache ./config.cache
configure: creating ./config.status
config.status: creating as
config.status: creating collect-ld
config.status: creating nm
config.status: creating Makefile
config.status: creating ada/gcc-interface/Makefile
config.status: creating ada/Makefile
config.status: creating auto-host.h
config.status: executing default commands
make[3]: Entering directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/gcc'
gawk -f /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/opt-gather.awk /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/ada/gcc-interface/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/fortran/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/go/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/java/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/lto/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/c-family/c.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/common.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/fused-madd.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/gnu-user.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/linux.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/linux-android.opt > tmp-optionlist
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-optionlist optionlist
echo timestamp > s-options
TARGET_CPU_DEFAULT="" \
HEADERS="config/i386/i386-protos.h tm-preds.h" DEFINES="" \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/mkconfig.sh tm_p.h
rm -f tmp-all-tree.def
echo '#include "tree.def"' > tmp-all-tree.def
echo 'END_OF_BASE_TREE_CODES' >> tmp-all-tree.def
echo '#include "c-family/c-common.def"' >> tmp-all-tree.def
ltf="/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/ada/gcc-interface/ada-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/cp/cp-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/java/java-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/objc/objc-tree.def"; for f in $ltf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/||' >> tmp-all-tree.def
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-all-tree.def all-tree.def
echo timestamp > s-alltree
if test no = yes \
|| test -n "m64=../lib64 m32=../lib mx32=../libx32"; then \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/genmultilib \
"m64/m32" \
" 64 32" \
"" \
"" \
"" \
"" \
"m64=../lib64 m32=../lib mx32=../libx32" \
"" \
"" \
"" \
"no" \
> tmp-mlib.h; \
else \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/genmultilib '' '' '' '' '' '' '' '' \
"" '' no \
> tmp-mlib.h; \
fi
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-mlib.h multilib.h
echo timestamp > s-mlib
lsf="/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/cp/lang-specs.h /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/lto/lang-specs.h"; for f in $lsf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/||' > tmp-specs.h
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-specs.h specs.h
echo timestamp > s-specs
echo "i686-pc-linux-gnu-g++ -DEFAULT_SSP -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -static-libstdc++ -static-libgcc -Wl,-O1 -Wl,--as-needed" > checksum-options.tmp \
&& /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change checksum-options.tmp checksum-options
gawk -f /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386-builtin-types.awk /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386-builtin-types.def > tmp-bt.inc
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-bt.inc i386-builtin-types.inc
echo timestamp > s-i386-bt
cp /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gcc-ar.c gcc-nm.c
cp /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gcc-ar.c gcc-ranlib.c
i686-pc-linux-gnu-g++ -c -DEFAULT_SSP -DHOST_GENERATOR_FILE -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c -o gengtype.o
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:0:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:500:34: error: declaration of C function 'const char* strsignal(int)' conflicts with
extern const char *strsignal (int);
^
In file included from /usr/lib/gcc/i686-pc-linux-gnu/4.8.4/include/g++-v4/cstring:42:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:205,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/usr/include/string.h:563:14: error: previous declaration 'char* strsignal(int)' here
extern char *strsignal (int __sig) __THROW;
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:645:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include/libiberty.h:110:36: error: new declaration 'char* basename(const char*)'
extern char *basename (const char *);
^
In file included from /usr/lib/gcc/i686-pc-linux-gnu/4.8.4/include/g++-v4/cstring:42:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:205,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/usr/include/string.h:600:26: error: ambiguates old declaration 'const char* basename(const char*)'
extern "C++" const char *basename (const char *__filename)
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:0:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:289:56: error: 'CHAR_BIT' was not declared in this scope
? ~ (t) 0 << (sizeof(t) * CHAR_BIT - 1) : (t) 0))
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:290:44: note: in expansion of macro 'INTTYPE_MINIMUM'
#define INTTYPE_MAXIMUM(t) ((t) (~ (t) 0 - INTTYPE_MINIMUM (t)))
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:294:20: note: in expansion of macro 'INTTYPE_MAXIMUM'
# define UCHAR_MAX INTTYPE_MAXIMUM (unsigned char)
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.h:455:23: note: in expansion of macro 'UCHAR_MAX'
CHAR_TOKEN_OFFSET = UCHAR_MAX + 1,
^
Makefile:1070: recipe for target 'gengtype.o' failed
make[3]: *** [gengtype.o] Error 1
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/gcc'
Makefile:4152: recipe for target 'all-stage1-gcc' failed
make[2]: *** [all-stage1-gcc] Error 2
make[2]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
Makefile:16150: recipe for target 'stage1-bubble' failed
make[1]: *** [stage1-bubble] Error 2
make[1]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
Makefile:16465: recipe for target 'bootstrap-lean' failed
make: *** [bootstrap-lean] Error 2
* ERROR: sys-devel/gcc-4.8.4::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.4::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-build-logs.tar.bz2 in your bug report.
*
* Messages for package sys-apps/baselayout-2.2:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package sys-devel/gcc-4.8.4:
* ERROR: sys-devel/gcc-4.8.4::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.4::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-build-logs.tar.bz2 in your bug report.
*
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1253, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1333, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1258, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage2
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/default/stage2-i686-20150812/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.l5nGh1/log/i686_stage2.log
^ permalink raw reply [flat|nested] 15+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage2.spec
@ 2015-10-28 5:42 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2015-10-28 5:42 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
28 Oct 2015 05:41:49 UTC: NOTICE : Using command line specified Catalyst configuration file: /etc/catalyst/release/x86-auto.conf
ContentsMap: __init__(), search_order = ['pixz', 'lbzip2', 'isoinfo_l', 'squashfs', 'gzip', 'xz', 'bzip2', 'tar', 'isoinfo_f']
28 Oct 2015 05:41:49 UTC: NOTICE : Using target: stage2
28 Oct 2015 05:41:49 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20151028/tmp/stage1root
28 Oct 2015 05:41:49 UTC: WARNING : If this is not desired, remove this directory or turn off seedcache in the
28 Oct 2015 05:41:49 UTC: WARNING : options of catalyst.conf. The source path will then be:
28 Oct 2015 05:41:49 UTC: WARNING : /home/release/buildroot/x86-dev/builds/default/stage1-i686-20151028
COMPRESS: __init__(), search_order = ['pixz_x', 'lbzip2_x', 'squashfs', 'gzip_x', 'xz_x', 'bzip2_x', 'tar_x']
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
28 Oct 2015 05:41:59 UTC: NOTICE : purge(); clearing autoresume ...
28 Oct 2015 05:41:59 UTC: NOTICE : purge(); clearing chroot ...
28 Oct 2015 05:41:59 UTC: NOTICE : Clearing the chroot path ...
28 Oct 2015 05:42:00 UTC: NOTICE : purge(); clearing package cache ...
28 Oct 2015 05:42:00 UTC: NOTICE : purging the pkgcache ...
28 Oct 2015 05:42:00 UTC: NOTICE : purge(); clearing kerncache ...
28 Oct 2015 05:42:00 UTC: NOTICE : --- Running action sequence: unpack
28 Oct 2015 05:42:00 UTC: NOTICE : Starting rsync from /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20151028/tmp/stage1root
28 Oct 2015 05:42:00 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage2-i686-20151028 (this may take some time) ..
28 Oct 2015 05:42:01 UTC: NOTICE : --- Running action sequence: unpack_snapshot
COMPRESS: determine_mode(), source = /home/release/buildroot/x86-dev/snapshots/portage-20151028.tar.bz2
COMPRESS: determine_mode(), mode = pixz_x ['pixz_x', 'lbzip2_x', 'squashfs', 'gzip_x', 'xz_x', 'bzip2_x', 'tar_x']
COMPRESS: determine_mode(), mode = lbzip2_x ['pixz_x', 'lbzip2_x', 'squashfs', 'gzip_x', 'xz_x', 'bzip2_x', 'tar_x']
28 Oct 2015 05:42:01 UTC: NOTICE : --- Running action sequence: setup_confdir
rsync: mkdir "/home/release/buildroot/x86-dev/tmp/default/stage2-i686-20151028/etc/portage" failed: No such file or directory (2)
rsync error: error in file IO (code 11) at main.c(656) [Receiver=3.1.1]
28 Oct 2015 05:42:01 UTC: ERROR : CatalystError: cmd() NON-zero return value from: Error copying /etc/portage
28 Oct 2015 05:42:01 UTC: ERROR : Exception running action sequence setup_confdir
Traceback (most recent call last):
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1405, in run
getattr(self, x)()
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 899, in setup_confdir
env=self.env)
File "/usr/lib64/python2.7/site-packages/catalyst/support.py", line 56, in cmd
print_traceback=False)
CatalystError
28 Oct 2015 05:42:01 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /home/release/tmp/run/catalyst-auto.pHUM8J/log/i686_stage2.log
^ permalink raw reply [flat|nested] 15+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage2.spec
@ 2015-11-04 23:40 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2015-11-04 23:40 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
04 Nov 2015 23:40:31 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
ContentsMap: __init__(), search_order = ['pixz', 'lbzip2', 'isoinfo_l', 'squashfs', 'gzip', 'xz', 'bzip2', 'tar', 'isoinfo_f']
04 Nov 2015 23:40:31 UTC: NOTICE : Using target: stage2
04 Nov 2015 23:40:31 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage1-i686-20151104
04 Nov 2015 23:40:31 UTC: WARNING : If this is not desired, remove this directory or turn off seedcache in the
04 Nov 2015 23:40:31 UTC: WARNING : options of catalyst.conf. The source path will then be:
04 Nov 2015 23:40:31 UTC: WARNING : /home/release/buildroot/x86-dev/builds/default/stage1-i686-20151104
COMPRESS: __init__(), search_order = ['bzip2', 'tar', 'pixz', 'xz', 'gzip', 'lbzip2']
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
04 Nov 2015 23:40:41 UTC: NOTICE : purge(); clearing autoresume ...
04 Nov 2015 23:40:41 UTC: NOTICE : purge(); clearing chroot ...
04 Nov 2015 23:40:41 UTC: NOTICE : Clearing the chroot path ...
04 Nov 2015 23:40:41 UTC: NOTICE : purge(); clearing package cache ...
04 Nov 2015 23:40:41 UTC: NOTICE : purging the pkgcache ...
04 Nov 2015 23:40:41 UTC: NOTICE : purge(); clearing kerncache ...
04 Nov 2015 23:40:41 UTC: NOTICE : --- Running action sequence: unpack
04 Nov 2015 23:40:41 UTC: ERROR : CatalystError: source path is a dir but seedcache is not enabled
04 Nov 2015 23:40:41 UTC: ERROR : Exception running action sequence unpack
Traceback (most recent call last):
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1401, in run
getattr(self, x)()
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 752, in unpack
"source path is a dir but seedcache is not enabled")
CatalystError
04 Nov 2015 23:40:41 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /home/release/tmp/run/catalyst-auto.aCMNNb/log/i686_stage2.log
^ permalink raw reply [flat|nested] 15+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage2.spec
@ 2015-11-11 6:41 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2015-11-11 6:41 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
11 Nov 2015 06:41:23 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
ContentsMap: __init__(), search_order = ['pixz', 'lbzip2', 'isoinfo_l', 'squashfs', 'gzip', 'xz', 'bzip2', 'tar', 'isoinfo_f']
11 Nov 2015 06:41:23 UTC: NOTICE : Using target: stage2
11 Nov 2015 06:41:23 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage1-i686-20151111
11 Nov 2015 06:41:23 UTC: WARNING : If this is not desired, remove this directory or turn off seedcache in the
11 Nov 2015 06:41:23 UTC: WARNING : options of catalyst.conf. The source path will then be:
11 Nov 2015 06:41:23 UTC: WARNING : /home/release/buildroot/x86-dev/builds/default/stage1-i686-20151111
COMPRESS: __init__(), search_order = ['bzip2', 'tar', 'pixz', 'xz', 'gzip', 'lbzip2']
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
11 Nov 2015 06:41:33 UTC: NOTICE : purge(); clearing autoresume ...
11 Nov 2015 06:41:33 UTC: NOTICE : purge(); clearing chroot ...
11 Nov 2015 06:41:33 UTC: NOTICE : Clearing the chroot path ...
11 Nov 2015 06:41:33 UTC: NOTICE : purge(); clearing package cache ...
11 Nov 2015 06:41:33 UTC: NOTICE : purging the pkgcache ...
11 Nov 2015 06:41:33 UTC: NOTICE : purge(); clearing kerncache ...
11 Nov 2015 06:41:33 UTC: NOTICE : --- Running action sequence: unpack
11 Nov 2015 06:41:33 UTC: ERROR : CatalystError: source path is a dir but seedcache is not enabled
11 Nov 2015 06:41:33 UTC: ERROR : Exception running action sequence unpack
Traceback (most recent call last):
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1399, in run
getattr(self, x)()
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 752, in unpack
"source path is a dir but seedcache is not enabled")
CatalystError
11 Nov 2015 06:41:33 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /home/release/tmp/run/catalyst-auto.k8okCx/log/i686_stage2.log
^ permalink raw reply [flat|nested] 15+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage2.spec
@ 2015-11-18 6:51 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2015-11-18 6:51 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
18 Nov 2015 06:51:32 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
ContentsMap: __init__(), search_order = ['pixz', 'lbzip2', 'isoinfo_l', 'squashfs', 'gzip', 'xz', 'bzip2', 'tar', 'isoinfo_f']
18 Nov 2015 06:51:32 UTC: NOTICE : Using target: stage2
18 Nov 2015 06:51:32 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage1-i686-20151118
18 Nov 2015 06:51:32 UTC: WARNING : If this is not desired, remove this directory or turn off seedcache in the
18 Nov 2015 06:51:32 UTC: WARNING : options of catalyst.conf. The source path will then be:
18 Nov 2015 06:51:32 UTC: WARNING : /home/release/buildroot/x86-dev/builds/default/stage1-i686-20151118
COMPRESS: __init__(), search_order = ['bzip2', 'tar', 'pixz', 'xz', 'gzip', 'lbzip2']
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
18 Nov 2015 06:51:42 UTC: NOTICE : purge(); clearing autoresume ...
18 Nov 2015 06:51:42 UTC: NOTICE : purge(); clearing chroot ...
18 Nov 2015 06:51:42 UTC: NOTICE : Clearing the chroot path ...
18 Nov 2015 06:51:42 UTC: NOTICE : purge(); clearing package cache ...
18 Nov 2015 06:51:42 UTC: NOTICE : purging the pkgcache ...
18 Nov 2015 06:51:42 UTC: NOTICE : purge(); clearing kerncache ...
18 Nov 2015 06:51:42 UTC: NOTICE : --- Running action sequence: unpack
18 Nov 2015 06:51:42 UTC: ERROR : CatalystError: source path is a dir but seedcache is not enabled
18 Nov 2015 06:51:42 UTC: ERROR : Exception running action sequence unpack
Traceback (most recent call last):
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1399, in run
getattr(self, x)()
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 752, in unpack
"source path is a dir but seedcache is not enabled")
CatalystError
18 Nov 2015 06:51:42 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /home/release/tmp/run/catalyst-auto.EOvd6X/log/i686_stage2.log
^ permalink raw reply [flat|nested] 15+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage2.spec
@ 2017-12-03 20:36 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2017-12-03 20:36 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
03 Dec 2017 20:36:05 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
03 Dec 2017 20:36:05 UTC: NOTICE : Processing spec file: i686/stage2.spec
03 Dec 2017 20:36:05 UTC: NOTICE : Using target: stage2
03 Dec 2017 20:36:05 UTC: NOTICE : Source file specification matching setting is: strict
03 Dec 2017 20:36:05 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
03 Dec 2017 20:36:05 UTC: NOTICE : Source path set to /release/buildroot/x86-dev/tmp/default/stage1-i686-20171203/
03 Dec 2017 20:36:05 UTC: NOTICE : Removing AutoResume Points ...
03 Dec 2017 20:36:05 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/.autoresume-stage2-i686-20171203
03 Dec 2017 20:36:05 UTC: NOTICE : purge(); clearing autoresume ...
03 Dec 2017 20:36:05 UTC: NOTICE : Removing AutoResume Points ...
03 Dec 2017 20:36:05 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/.autoresume-stage2-i686-20171203
03 Dec 2017 20:36:05 UTC: NOTICE : purge(); clearing chroot ...
03 Dec 2017 20:36:05 UTC: NOTICE : Clearing the chroot path ...
03 Dec 2017 20:36:05 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/stage2-i686-20171203
03 Dec 2017 20:36:05 UTC: NOTICE : purge(); clearing package cache ...
03 Dec 2017 20:36:05 UTC: NOTICE : purging the pkgcache ...
03 Dec 2017 20:36:05 UTC: NOTICE : purge(); clearing kerncache ...
03 Dec 2017 20:36:05 UTC: NOTICE : --- Running action sequence: unpack
03 Dec 2017 20:36:05 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
03 Dec 2017 20:36:05 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
03 Dec 2017 20:36:05 UTC: NOTICE : Removing AutoResume Points ...
03 Dec 2017 20:36:05 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/.autoresume-stage2-i686-20171203
03 Dec 2017 20:36:05 UTC: NOTICE : Clearing the chroot path ...
03 Dec 2017 20:36:05 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/stage2-i686-20171203
03 Dec 2017 20:36:05 UTC: NOTICE : Starting rsync from /release/buildroot/x86-dev/tmp/default/stage1-i686-20171203/
03 Dec 2017 20:36:05 UTC: NOTICE : to /release/buildroot/x86-dev/tmp/default/stage2-i686-20171203 (this may take some time) ..
03 Dec 2017 20:36:06 UTC: NOTICE : --- Running action sequence: unpack_snapshot
03 Dec 2017 20:36:06 UTC: NOTICE : --- Running action sequence: setup_confdir
03 Dec 2017 20:36:06 UTC: NOTICE : --- Running action sequence: portage_overlay
03 Dec 2017 20:36:06 UTC: NOTICE : --- Running action sequence: base_dirs
03 Dec 2017 20:36:06 UTC: NOTICE : --- Running action sequence: bind
03 Dec 2017 20:36:06 UTC: NOTICE : --- Running action sequence: chroot_setup
03 Dec 2017 20:36:06 UTC: NOTICE : Setting up chroot...
03 Dec 2017 20:36:06 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
03 Dec 2017 20:36:06 UTC: WARNING : If your build fails look here first as the possible problem.
03 Dec 2017 20:36:06 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
03 Dec 2017 20:36:06 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
03 Dec 2017 20:36:06 UTC: WARNING : You have been warned.
03 Dec 2017 20:36:06 UTC: ERROR : Exception running action sequence chroot_setup
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1437, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1054, in chroot_setup
self.settings['chroot_path'] + '/tmp/envscript')
File "/usr/lib64/python3.4/shutil.py", line 229, in copy
copyfile(src, dst, follow_symlinks=follow_symlinks)
File "/usr/lib64/python3.4/shutil.py", line 109, in copyfile
with open(dst, 'wb') as fdst:
FileNotFoundError: [Errno 2] No such file or directory: '/release/buildroot/x86-dev/tmp/default/stage2-i686-20171203/tmp/envscript'
03 Dec 2017 20:36:06 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
0.45user 0.05system 0:00.69elapsed 72%CPU (0avgtext+0avgdata 70128maxresident)k
0inputs+56outputs (0major+21507minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20171203.dlFkLA/log/i686_stage2.log
^ permalink raw reply [flat|nested] 15+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage2.spec
@ 2018-02-21 7:04 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2018-02-21 7:04 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage2.spec
21 Feb 2018 07:03:26 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
21 Feb 2018 07:03:26 UTC: NOTICE : conf_values[options] = {'pkgcache', 'preserve_libs', 'bindist', 'clear-autoresume'}
21 Feb 2018 07:03:26 UTC: NOTICE : Processing spec file: i686/stage2.spec
21 Feb 2018 07:03:26 UTC: NOTICE : Using target: stage2
21 Feb 2018 07:03:26 UTC: NOTICE : Source file specification matching setting is: loose
21 Feb 2018 07:03:26 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
21 Feb 2018 07:03:27 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage1-i686-20180221T030003Z.tar.xz
21 Feb 2018 07:03:27 UTC: NOTICE : --- Running action sequence: unpack
21 Feb 2018 07:03:27 UTC: NOTICE : Clearing the chroot path ...
21 Feb 2018 07:03:27 UTC: NOTICE : Emptying directory: /home/release/buildroot/x86-dev/tmp/default/stage2-i686-20180221T030003Z
21 Feb 2018 07:03:27 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage1-i686-20180221T030003Z.tar.xz
21 Feb 2018 07:03:27 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage2-i686-20180221T030003Z (this may take some time) ..
21 Feb 2018 07:03:28 UTC: NOTICE : --- Running action sequence: unpack_snapshot
21 Feb 2018 07:03:28 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
21 Feb 2018 07:03:42 UTC: NOTICE : --- Running action sequence: setup_confdir
21 Feb 2018 07:03:42 UTC: NOTICE : --- Running action sequence: portage_overlay
21 Feb 2018 07:03:42 UTC: NOTICE : --- Running action sequence: base_dirs
21 Feb 2018 07:03:42 UTC: NOTICE : --- Running action sequence: bind
21 Feb 2018 07:03:42 UTC: NOTICE : --- Running action sequence: chroot_setup
21 Feb 2018 07:03:42 UTC: NOTICE : Setting up chroot...
21 Feb 2018 07:03:42 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
21 Feb 2018 07:03:42 UTC: WARNING : If your build fails look here first as the possible problem.
21 Feb 2018 07:03:42 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
21 Feb 2018 07:03:42 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
21 Feb 2018 07:03:42 UTC: WARNING : You have been warned.
21 Feb 2018 07:03:42 UTC: NOTICE : Writing the stage make.conf to: /home/release/buildroot/x86-dev/tmp/default/stage2-i686-20180221T030003Z/etc/portage/make.conf
21 Feb 2018 07:03:42 UTC: NOTICE : STICKY-CONFIG is enabled
21 Feb 2018 07:03:42 UTC: NOTICE : --- Running action sequence: setup_environment
21 Feb 2018 07:03:42 UTC: NOTICE : --- Running action sequence: run_local
Copying stage2-chroot.sh to /tmp
copying stage2-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage2-i686-20180221T030003Z/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage2-i686-20180221T030003Z/tmp
Ensure the file has the executable bit set
Running stage2-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage2-i686-20180221T030003Z /tmp/stage2-chroot.sh
>>> Regenerating /etc/ld.so.cache...
Gentoo Linux; http://www.gentoo.org/
Copyright 1999-$ Gentoo Foundation; Distributed under the GPLv2
-------------------------------------------------------------------------------
[[ (0/3) Locating packages ]]
* Using baselayout : >=sys-apps/baselayout-2
* Using portage : portage
* Using os-headers : >=sys-kernel/linux-headers-4.13
* Using binutils : sys-devel/binutils
* Using gcc : sys-devel/gcc
* Using gettext : gettext
* Using libc : virtual/libc
* Using texinfo : sys-apps/texinfo
* Using zlib : zlib
* Using ncurses : ncurses
-------------------------------------------------------------------------------
[[ (1/3) Configuring environment ]]
-------------------------------------------------------------------------------
[[ (2/3) Updating portage ]]
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.24-r1::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.24-r1::gentoo
* Messages for package sys-apps/portage-2.3.24-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
-------------------------------------------------------------------------------
[[ (3/3) Emerging packages ]]
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-devel/gcc-6.4.0-r1
>>> Emerging (1 of 15) sys-apps/baselayout-2.4.1-r2::gentoo
>>> Installing (1 of 15) sys-apps/baselayout-2.4.1-r2::gentoo
>>> Emerging (2 of 15) app-portage/elt-patches-20170815::gentoo
>>> Installing (2 of 15) app-portage/elt-patches-20170815::gentoo
>>> Emerging (3 of 15) sys-libs/zlib-1.2.11-r1::gentoo
>>> Failed to emerge sys-libs/zlib-1.2.11-r1, Log file:
>>> '/var/tmp/portage/sys-libs/zlib-1.2.11-r1/temp/build.log'
* Package: sys-libs/zlib-1.2.11-r1
* Repository: gentoo
* USE: abi_x86_32 elibc_glibc kernel_linux userland_GNU x86
* FEATURES: preserve-libs sandbox userpriv usersandbox
gzip: error while loading shared libraries: cannot make segment writable for relocation: Permission denied
tar: This does not look like a tar archive
tar: Exiting with failure status due to previous errors
* ERROR: sys-libs/zlib-1.2.11-r1::gentoo failed (unpack phase):
* unpack: failure unpacking zlib-1.2.11.tar.gz
*
* Call stack:
* ebuild.sh, line 124: Called src_unpack
* environment, line 2771: Called default
* phase-functions.sh, line 853: Called default_src_unpack
* phase-functions.sh, line 880: Called __eapi0_src_unpack
* phase-helpers.sh, line 740: Called unpack 'zlib-1.2.11.tar.gz'
* phase-helpers.sh, line 387: Called __unpack_tar 'gzip -d'
* phase-helpers.sh, line 318: Called __assert_sigpipe_ok 'unpack: failure unpacking zlib-1.2.11.tar.gz'
* isolated-functions.sh, line 41: Called __helpers_die 'unpack: failure unpacking zlib-1.2.11.tar.gz'
* isolated-functions.sh, line 117: Called die
* The specific snippet of code:
* die "$@"
*
* If you need support, post the output of `emerge --info '=sys-libs/zlib-1.2.11-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/zlib-1.2.11-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-libs/zlib-1.2.11-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/zlib-1.2.11-r1/temp/environment'.
* Working directory: '/var/tmp/portage/sys-libs/zlib-1.2.11-r1/work'
* S: '/var/tmp/portage/sys-libs/zlib-1.2.11-r1/work/zlib-1.2.11'
* Messages for package sys-apps/baselayout-2.4.1-r2:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* You should reboot now to get /run mounted with tmpfs!
* Messages for package sys-libs/zlib-1.2.11-r1:
* ERROR: sys-libs/zlib-1.2.11-r1::gentoo failed (unpack phase):
* unpack: failure unpacking zlib-1.2.11.tar.gz
*
* Call stack:
* ebuild.sh, line 124: Called src_unpack
* environment, line 2771: Called default
* phase-functions.sh, line 853: Called default_src_unpack
* phase-functions.sh, line 880: Called __eapi0_src_unpack
* phase-helpers.sh, line 740: Called unpack 'zlib-1.2.11.tar.gz'
* phase-helpers.sh, line 387: Called __unpack_tar 'gzip -d'
* phase-helpers.sh, line 318: Called __assert_sigpipe_ok 'unpack: failure unpacking zlib-1.2.11.tar.gz'
* isolated-functions.sh, line 41: Called __helpers_die 'unpack: failure unpacking zlib-1.2.11.tar.gz'
* isolated-functions.sh, line 117: Called die
* The specific snippet of code:
* die "$@"
*
* If you need support, post the output of `emerge --info '=sys-libs/zlib-1.2.11-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/zlib-1.2.11-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-libs/zlib-1.2.11-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/zlib-1.2.11-r1/temp/environment'.
* Working directory: '/var/tmp/portage/sys-libs/zlib-1.2.11-r1/work'
* S: '/var/tmp/portage/sys-libs/zlib-1.2.11-r1/work/zlib-1.2.11'
21 Feb 2018 07:04:45 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1
21 Feb 2018 07:04:45 UTC: ERROR : CatalystError: Stage build aborting due to error.
21 Feb 2018 07:04:45 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.5/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
21 Feb 2018 07:04:45 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
41.23user 18.55system 1:19.09elapsed 75%CPU (0avgtext+0avgdata 321616maxresident)k
8inputs+2176416outputs (0major+2500474minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20180221T030003Z.Pb6BBV/log/i686_stage2.log
^ permalink raw reply [flat|nested] 15+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage2.spec
@ 2020-06-15 22:41 catalyst
0 siblings, 0 replies; 15+ messages in thread
From: catalyst @ 2020-06-15 22:41 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
15 Jun 2020 22:38:22 UTC: NOTICE : --- Running action sequence: unpack_snapshot
15 Jun 2020 22:38:22 UTC: NOTICE : --- Running action sequence: setup_confdir
15 Jun 2020 22:38:22 UTC: NOTICE : --- Running action sequence: portage_overlay
15 Jun 2020 22:38:22 UTC: NOTICE : --- Running action sequence: base_dirs
15 Jun 2020 22:38:22 UTC: NOTICE : --- Running action sequence: bind
15 Jun 2020 22:38:22 UTC: NOTICE : --- Running action sequence: chroot_setup
15 Jun 2020 22:38:22 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
15 Jun 2020 22:38:22 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
WARNING:catalyst:Overriding certain env variables may cause catastrophic failure.
15 Jun 2020 22:38:22 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
15 Jun 2020 22:38:22 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
WARNING:catalyst:Catalyst assumes you know what you are doing when setting these variables.
15 Jun 2020 22:38:22 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
WARNING:catalyst:Catalyst Maintainers use VERY minimal envscripts, if used at all.
15 Jun 2020 22:38:22 UTC: WARNING : You have been warned.
WARNING:catalyst:You have been warned.
15 Jun 2020 22:38:22 UTC: NOTICE : Writing the stage make.conf to: /release/buildroot/x86-dev/tmp/default/stage2-i686-20200615T214503Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /release/buildroot/x86-dev/tmp/default/stage2-i686-20200615T214503Z/etc/portage/make.conf
15 Jun 2020 22:38:22 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
15 Jun 2020 22:38:22 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
15 Jun 2020 22:38:22 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
Copying stage2-chroot.sh to /tmp
copying stage2-chroot.sh to /release/buildroot/x86-dev/tmp/default/stage2-i686-20200615T214503Z/tmp
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/default/stage2-i686-20200615T214503Z/tmp
Ensure the file has the executable bit set
Running stage2-chroot.sh in chroot:
setarch linux32 chroot /release/buildroot/x86-dev/tmp/default/stage2-i686-20200615T214503Z /tmp/stage2-chroot.sh
>>> Regenerating /etc/ld.so.cache...
Gentoo Linux; http://www.gentoo.org/
Copyright 1999-2020 Gentoo Authors; Distributed under the GPLv2
-------------------------------------------------------------------------------
[[ (0/3) Locating packages ]]
* Using baselayout : >=sys-apps/baselayout-2
* Using portage : sys-apps/portage
* Using os-headers : >=sys-kernel/linux-headers-5.4-r1
* Using binutils : sys-devel/binutils
* Using gcc : sys-devel/gcc
* Using gettext : sys-devel/gettext
* Using libc : sys-libs/glibc:2.2
* Using texinfo : sys-apps/texinfo
* Using zlib : sys-libs/zlib
* Using ncurses : sys-libs/ncurses
-------------------------------------------------------------------------------
[[ (1/3) Configuring environment ]]
-------------------------------------------------------------------------------
[[ (2/3) Updating portage ]]
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Running pre-merge checks for sys-apps/portage-2.3.99-r2
* Checking for suitable kernel configuration options...
[ ok ]
>>> Emerging binary (1 of 1) sys-apps/portage-2.3.99-r2::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.99-r2::gentoo
-------------------------------------------------------------------------------
[[ (3/3) Emerging packages ]]
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-libs/glibc-2.30-r8
* Checking general environment sanity.
i686-pc-linux-gnu-gcc -march=i686 -pipe -O2 -Wl,-O1 -Wl,--as-needed glibc-test.c -o glibc-test
* Checking gcc for __thread support ...
[ ok ]
* Checking running kernel version (4.14.34-gentoo-infra38 >= 3.2.0) ...
[ ok ]
* Checking linux-headers version (5.4.0 >= 3.2.0) ...
[ ok ]
>>> Running pre-merge checks for sys-devel/gcc-9.3.0
>>> Emerging binary (1 of 16) sys-libs/zlib-1.2.11-r2::gentoo
>>> Installing (1 of 16) sys-libs/zlib-1.2.11-r2::gentoo
>>> Emerging binary (2 of 16) sys-apps/baselayout-2.6-r1::gentoo
>>> Installing (2 of 16) sys-apps/baselayout-2.6-r1::gentoo
>>> Emerging binary (3 of 16) sys-kernel/linux-headers-5.4-r1::gentoo
>>> Installing (3 of 16) sys-kernel/linux-headers-5.4-r1::gentoo
>>> Emerging binary (4 of 16) sys-libs/glibc-2.30-r8::gentoo
>>> Emerging binary (5 of 16) sys-devel/binutils-2.33.1-r1::gentoo
>>> Installing (4 of 16) sys-libs/glibc-2.30-r8::gentoo
>>> Installing (5 of 16) sys-devel/binutils-2.33.1-r1::gentoo
>>> Emerging binary (6 of 16) sys-devel/gettext-0.20.1::gentoo
>>> Installing (6 of 16) sys-devel/gettext-0.20.1::gentoo
>>> Emerging binary (7 of 16) sys-devel/gcc-9.3.0::gentoo
>>> Emerging binary (8 of 16) virtual/perl-File-Spec-3.780.0::gentoo
>>> Emerging binary (9 of 16) dev-perl/Text-Unidecode-1.300.0::gentoo
>>> Installing (8 of 16) virtual/perl-File-Spec-3.780.0::gentoo
>>> Emerging binary (10 of 16) virtual/perl-Carp-1.500.0-r2::gentoo
>>> Installing (9 of 16) dev-perl/Text-Unidecode-1.300.0::gentoo
>>> Emerging binary (11 of 16) virtual/perl-version-0.992.400::gentoo
>>> Emerging binary (12 of 16) dev-perl/Unicode-EastAsianWidth-1.330.0-r1::gentoo
>>> Installing (10 of 16) virtual/perl-Carp-1.500.0-r2::gentoo
>>> Emerging binary (13 of 16) dev-perl/Class-Inspector-1.320.0::gentoo
>>> Installing (11 of 16) virtual/perl-version-0.992.400::gentoo
>>> Installing (12 of 16) dev-perl/Unicode-EastAsianWidth-1.330.0-r1::gentoo
>>> Installing (13 of 16) dev-perl/Class-Inspector-1.320.0::gentoo
>>> Installing (7 of 16) sys-devel/gcc-9.3.0::gentoo
>>> Emerging binary (14 of 16) dev-perl/File-ShareDir-1.104.0::gentoo
>>> Installing (14 of 16) dev-perl/File-ShareDir-1.104.0::gentoo
>>> Emerging binary (15 of 16) dev-perl/libintl-perl-1.310.0::gentoo
>>> Installing (15 of 16) dev-perl/libintl-perl-1.310.0::gentoo
>>> Emerging (16 of 16) sys-apps/texinfo-6.7::gentoo
>>> Failed to emerge sys-apps/texinfo-6.7
* Messages for package sys-apps/baselayout-2.6-r1:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package sys-devel/gcc-9.3.0:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package sys-apps/texinfo-6.7:
* ERROR: sys-apps/texinfo-6.7::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-apps/texinfo-6.7::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/texinfo-6.7::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/texinfo-6.7/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/texinfo-6.7/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/texinfo-6.7/work/texinfo-6.7'
* S: '/var/tmp/portage/sys-apps/texinfo-6.7/work/texinfo-6.7'
* IMPORTANT: config file '/etc/locale.gen' needs updating.
* See the CONFIGURATION FILES and CONFIGURATION FILES UPDATE TOOLS
* sections of the emerge man page to learn how to update config files.
15 Jun 2020 22:41:10 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1
15 Jun 2020 22:41:10 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage2-i686-20200615T214503Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage2-i686-20200615T214503Z/var/tmp/portage is not a mount point. Skipping
15 Jun 2020 22:41:10 UTC: ERROR : CatalystError: Stage build aborting due to error.
ERROR:catalyst:CatalystError: Stage build aborting due to error.
15 Jun 2020 22:41:10 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1366, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1375, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
ERROR:catalyst:Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1366, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1375, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
15 Jun 2020 22:41:10 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
15 Jun 2020 22:41:10 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage2-i686-20200615T214503Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage2-i686-20200615T214503Z/tmp/kerncache is not a mount point. Skipping
15 Jun 2020 22:41:10 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage2-i686-20200615T214503Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage2-i686-20200615T214503Z/var/cache/binpkgs is not a mount point. Skipping
15 Jun 2020 22:41:10 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage2-i686-20200615T214503Z/run is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage2-i686-20200615T214503Z/run is not a mount point. Skipping
15 Jun 2020 22:41:10 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage2-i686-20200615T214503Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage2-i686-20200615T214503Z/dev/shm does not exist. Skipping
15 Jun 2020 22:41:10 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage2-i686-20200615T214503Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage2-i686-20200615T214503Z/dev/pts does not exist. Skipping
15 Jun 2020 22:41:10 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage2-i686-20200615T214503Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage2-i686-20200615T214503Z/var/tmp/portage is not a mount point. Skipping
15 Jun 2020 22:41:10 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage2-i686-20200615T214503Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage2-i686-20200615T214503Z/var/cache/distfiles is not a mount point. Skipping
15 Jun 2020 22:41:10 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage2-i686-20200615T214503Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage2-i686-20200615T214503Z/var/db/repos/gentoo is not a mount point. Skipping
15 Jun 2020 22:41:10 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage2-i686-20200615T214503Z/dev is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage2-i686-20200615T214503Z/dev is not a mount point. Skipping
15 Jun 2020 22:41:10 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage2-i686-20200615T214503Z/proc is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage2-i686-20200615T214503Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
160.74user 60.42system 2:51.33elapsed 129%CPU (0avgtext+0avgdata 69528maxresident)k
139480inputs+1696624outputs (2major+8723723minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20200615T214503Z.pZFfqI/log/i686_stage2.log
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2020-06-15 22:41 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-02-21 7:04 [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage2.spec catalyst
-- strict thread matches above, loose matches on Subject: below --
2020-06-15 22:41 catalyst
2017-12-03 20:36 catalyst
2015-11-18 6:51 catalyst
2015-11-11 6:41 catalyst
2015-11-04 23:40 catalyst
2015-10-28 5:42 catalyst
2015-08-12 9:20 catalyst
2015-07-29 7:33 catalyst
2015-07-01 5:02 catalyst
2015-06-19 4:36 catalyst
2014-11-26 5:49 catalyst
2014-11-05 5:34 catalyst
2011-09-06 8:26 catalyst
2011-03-29 7:22 catalyst
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox