* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2011-05-17 18:58 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2011-05-17 18:58 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Installing (110 of 134) sys-apps/module-init-tools-3.5
>>> Emerging (111 of 134) sys-apps/help2man-1.38.2
>>> Installing (111 of 134) sys-apps/help2man-1.38.2
>>> Emerging (112 of 134) sys-devel/automake-1.11.1
>>> Installing (112 of 134) sys-devel/automake-1.11.1
>>> Emerging (113 of 134) sys-apps/groff-1.21
>>> Installing (113 of 134) sys-apps/groff-1.21
>>> Emerging (114 of 134) sys-apps/man-1.6f-r4
>>> Failed to emerge sys-apps/man-1.6f-r4, Log file:
>>> '/var/tmp/portage/sys-apps/man-1.6f-r4/temp/build.log'
* Package: sys-apps/man-1.6f-r4
* Repository: gentoo
* Maintainer: base-system@gentoo.org
* USE: elibc_glibc ia64 kernel_linux nls userland_GNU
* FEATURES: sandbox
* Adding group 'man' to your system ...
* - Groupid: 15
/usr/portage/eclass/eutils.eclass: line 860: groupadd: command not found
* ERROR: sys-apps/man-1.6f-r4 failed (setup phase):
* enewgroup failed
*
* Call stack:
* ebuild.sh, line 56: Called pkg_setup
* man-1.6f-r4.ebuild, line 24: Called enewgroup 'man' '15'
* eutils.eclass, line 860: Called die
* The specific snippet of code:
* groupadd -r ${opts} ${egroup} || die "enewgroup failed"
*
* If you need support, post the output of 'emerge --info =sys-apps/man-1.6f-r4',
* the complete build log and the output of 'emerge -pqv =sys-apps/man-1.6f-r4'.
* The complete build log is located at '/var/tmp/portage/sys-apps/man-1.6f-r4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/man-1.6f-r4/temp/die.env'.
* S: '/var/tmp/portage/sys-apps/man-1.6f-r4/work/man-1.6f'
* Messages for package sys-libs/timezone-data-2011e:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package app-portage/portage-utils-0.3.1:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package sys-libs/glibc-2.11.3:
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-libs/gdbm-1.8.3-r4:
* 32bit systems might have to rebuild all gdbm databases due to
* LFS changes in the gdbm format. You can either delete the db
* and regenerate it from scratch, or use the converter:
* http://bugs.gentoo.org/attachment.cgi?id=215326
*
* See this comment for information on how to use it:
* http://bugs.gentoo.org/299390#c15
*
* You should be able to locate most gdbm db's on your system with:
* find /etc /var -type f -exec file {} + | grep 'GNU dbm 1.x or ndbm database'
*
* You could also try using this helper script:
* http://bugs.gentoo.org/attachment.cgi?id=222581
* Messages for package sys-fs/udev-151-r4:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* udev-151 does not support Linux kernel before version 2.6.25!
* For a reliable udev, use at least kernel 2.6.27
*
* You need to add the udev init script to the runlevel sysinit,
* else your system will not be able to boot
* after updating to >=openrc-0.4.0
* Run this to enable udev for >=openrc-0.4.0:
* rc-update add udev sysinit
*
* Auto-adding 'udev-postmount' service to your default runlevel
*
* If after the udev update removable devices or CD/DVD drives
* stop working, try re-emerging HAL before filling a bug report
*
* persistent-net does assigning fixed names to network devices.
* If you have problems with the persistent-net rules,
* just delete the rules file
* rm /etc/udev/rules.d/70-persistent-net.rules
* and then reboot.
*
* This may however number your devices in a different way than they are now.
*
* If you build an initramfs including udev, then please
* make sure that the /sbin/udevadm binary gets included,
* and your scripts changed to use it,as it replaces the
* old helper apps udevinfo, udevtrigger, ...
*
* mount options for directory /dev are no longer
* set in /etc/udev/udev.conf, but in /etc/fstab
* as for other directories.
*
* This version of udev no longer has devfs-compat enabled
* If you use /dev/md/*, /dev/loop/* or /dev/rd/*,
* then please migrate over to using the device names
* /dev/md*, /dev/loop* and /dev/ram*.
* The devfs-compat rules will be removed on the next udev update.
* For reference see Bug #269359.
*
* This version of udev no longer has use flag old-hd-rules enabled
* So all special rules for /dev/hd* devices are missing
* Please migrate to the new libata if you need these rules.
* They will be completely removed on the next udev update.
*
* For more information on udev on Gentoo, writing udev rules, and
* fixing known issues visit:
* http://www.gentoo.org/doc/en/udev-guide.xml
* Messages for package sys-apps/portage-2.1.9.42:
* If you are an ebuild developer and you plan to commit ebuilds
* with this system then please install dev-python/pycrypto or
* enable the ssl USE flag for >=dev-lang/python-2.6 in order
* to enable RMD160 hash support.
* See bug #198398 for more information.
* Messages for package app-misc/ca-certificates-20090709:
* You should run update-ca-certificates manually after etc-update
* Messages for package dev-vcs/git-1.7.3.4-r1:
* These additional scripts need some dependencies:
* git-quiltimport : dev-util/quilt
* git-instaweb : || ( www-servers/lighttpd www-servers/apache )
* Messages for package sys-apps/coreutils-8.7:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package net-misc/wget-1.12-r3:
* The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
* Messages for package sys-fs/e2fsprogs-1.41.12:
* No /etc/mtab file, creating one temporarily
* Messages for package sys-apps/man-1.6f-r4:
* ERROR: sys-apps/man-1.6f-r4 failed (setup phase):
* enewgroup failed
*
* Call stack:
* ebuild.sh, line 56: Called pkg_setup
* man-1.6f-r4.ebuild, line 24: Called enewgroup 'man' '15'
* eutils.eclass, line 860: Called die
* The specific snippet of code:
* groupadd -r ${opts} ${egroup} || die "enewgroup failed"
*
* If you need support, post the output of 'emerge --info =sys-apps/man-1.6f-r4',
* the complete build log and the output of 'emerge -pqv =sys-apps/man-1.6f-r4'.
* The complete build log is located at '/var/tmp/portage/sys-apps/man-1.6f-r4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/man-1.6f-r4/temp/die.env'.
* S: '/var/tmp/portage/sys-apps/man-1.6f-r4/work/man-1.6f'
* Regenerating GNU info directory index...
* Processed 74 info files.
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1207, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1212, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage3-ia64-20110517/.catalyst_lock'
Full build log at /tmp/catalyst-auto.2490/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2012-07-17 15:11 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2012-07-17 15:11 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying stage3-chroot.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20120717/tmp/
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20120717/tmp/
Running stage3-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage3-ia64-20120717/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps --update sys-apps/portage
emerge --quiet --usepkg --buildpkg --newuse -e system
>>> Verifying ebuild manifests
>>> Starting parallel fetch
>>> Emerging (1 of 118) app-arch/xz-utils-5.0.3
>>> Installing (1 of 118) app-arch/xz-utils-5.0.3
>>> Emerging (2 of 118) virtual/libintl-0
>>> Installing (2 of 118) virtual/libintl-0
>>> Emerging (3 of 118) sys-devel/gnuconfig-20120116
>>> Installing (3 of 118) sys-devel/gnuconfig-20120116
>>> Emerging (4 of 118) virtual/libiconv-0
>>> Installing (4 of 118) virtual/libiconv-0
>>> Emerging (5 of 118) app-arch/bzip2-1.0.6-r3
>>> Installing (5 of 118) app-arch/bzip2-1.0.6-r3
>>> Emerging (6 of 118) dev-libs/expat-2.1.0
>>> Installing (6 of 118) dev-libs/expat-2.1.0
>>> Emerging (7 of 118) sys-devel/gcc-config-1.6
>>> Installing (7 of 118) sys-devel/gcc-config-1.6
>>> Emerging (8 of 118) sys-libs/timezone-data-2012c
>>> Installing (8 of 118) sys-libs/timezone-data-2012c
>>> Emerging (9 of 118) dev-libs/libffi-3.0.11
>>> Installing (9 of 118) dev-libs/libffi-3.0.11
>>> Emerging (10 of 118) app-misc/mime-types-8
>>> Installing (10 of 118) app-misc/mime-types-8
>>> Emerging (11 of 118) sys-apps/tcp-wrappers-7.6-r8
>>> Installing (11 of 118) sys-apps/tcp-wrappers-7.6-r8
>>> Emerging (12 of 118) sys-apps/which-2.20
>>> Installing (12 of 118) sys-apps/which-2.20
>>> Emerging (13 of 118) sys-devel/patch-2.6.1
>>> Installing (13 of 118) sys-devel/patch-2.6.1
>>> Emerging (14 of 118) sys-devel/autoconf-wrapper-12
>>> Installing (14 of 118) sys-devel/autoconf-wrapper-12
>>> Emerging (15 of 118) app-portage/portage-utils-0.10
>>> Installing (15 of 118) app-portage/portage-utils-0.10
>>> Emerging (16 of 118) sys-devel/automake-wrapper-6
>>> Installing (16 of 118) sys-devel/automake-wrapper-6
>>> Emerging (17 of 118) app-misc/pax-utils-0.4
>>> Installing (17 of 118) app-misc/pax-utils-0.4
>>> Emerging (18 of 118) virtual/libffi-0
>>> Installing (18 of 118) virtual/libffi-0
>>> Emerging (19 of 118) sys-apps/net-tools-1.60_p20110409135728
>>> Failed to emerge sys-apps/net-tools-1.60_p20110409135728, Log file:
>>> '/var/tmp/portage/sys-apps/net-tools-1.60_p20110409135728/temp/build.log'
* Package: sys-apps/net-tools-1.60_p20110409135728
* Repository: gentoo
* USE: elibc_glibc ia64 kernel_linux nls userland_GNU
* FEATURES: sandbox
* Applying various patches (bugfixes/updates) ...
* 0001-prevent-overflows-in-interface-buffers.patch ...
[ ok ]
* 0002-revert-621a2f376334f8097604b9fee5783e0f1141e66d-for-.patch ...
[ ok ]
* Done with patching
* Setting option I18N to y
* Setting option HAVE_HWIB to y
*
*
* Internationalization
*
* The net-tools package has currently been translated to French,
* German and Brazilian Portugese. Other translations are, of
* course, welcome. Answer `n' here if you have no support for
* internationalization on your system.
*
Does your system support GNU gettext? (I18N) [y] *
*
* Protocol Families.
*
UNIX protocol family (HAVE_AFUNIX) [y] INET (TCP/IP) protocol family (HAVE_AFINET) [y] INET6 (IPv6) protocol family (HAVE_AFINET6) [y] Novell IPX/SPX protocol family (HAVE_AFIPX) [y] Appletalk DDP protocol family (HAVE_AFATALK) [y] AX25 (packet radio) protocol family (HAVE_AFAX25) [y] NET/ROM (packet radio) protocol family (HAVE_AFNETROM) [y] Rose (packet radio) protocol family (HAVE_AFROSE) [y] X.25 (CCITT) protocol family (HAVE_AFX25) [y] Econet protocol family (HAVE_AFECONET) [y] DECnet protocol family (HAVE_AFDECnet) [n] Ash protocol family (HAVE_AFASH) [y] *
*
* Device Hardware types.
*
Ethernet (generic) support (HAVE_HWETHER) [y] ARCnet support (HAVE_HWARC) [y] SLIP (serial line) support (HAVE_HWSLIP) [y] PPP (serial line) support (HAVE_HWPPP) [y] IPIP Tunnel support (HAVE_HWTUNNEL) [y] STRIP (Metricom radio) support (HAVE_HWSTRIP) [y] Token ring (generic) support (HAVE_HWTR) [y] AX25 (packet radio) support (HAVE_HWAX25) [y] Rose (packet radio) support (HAVE_HWROSE) [y] NET/ROM (packet radio) support (HAVE_HWNETROM) [y] X.25 (generic) support (HAVE_HWX25) [y] DLCI/FRAD (frame relay) support (HAVE_HWFR) [y] SIT (IPv6-in-IPv4) support (HAVE_HWSIT) [y] FDDI (generic) support (HAVE_HWFDDI) [y] HIPPI (generic) support (HAVE_HWHIPPI) [y] Ash hardware support (HAVE_HWASH) [y] (Cisco)-HDLC/LAPB support (HAVE_HWHDLCLAPB) [y] IrDA support (HAVE_HWIRDA) [y] Econet hardware support (HAVE_HWEC) [y] Generic EUI-64 hardware support (HAVE_HWEUI64) [y] InfiniBand hardware support (HAVE_HWIB) [y] *
*
* Other Features.
*
IP Masquerading support (HAVE_FW_MASQUERADE) [y] Build iptunnel and ipmaddr (HAVE_IP_TOOLS) [y] Build mii-tool (HAVE_MII) [y] make[1]: Entering directory `/var/tmp/portage/sys-apps/net-tools-1.60_p20110409135728/work/net-tools-1.60_p20110409135728/lib'
ia64-unknown-linux-gnu-gcc -O2 -pipe -Wall -fno-strict-aliasing -I.. -I../include -D_GNU_SOURCE -I. -I/var/tmp/portage/sys-apps/net-tools-1.60_p20110409135728/work/net-tools-1.60_p20110409135728/include -Ilib -c -o activate.o activate.c
ia64-unknown-linux-gnu-gcc -O2 -pipe -Wall -fno-strict-aliasing -I.. -I../include -D_GNU_SOURCE -I. -I/var/tmp/portage/sys-apps/net-tools-1.60_p20110409135728/work/net-tools-1.60_p20110409135728/include -Ilib -c -o af.o af.c
ia64-unknown-linux-gnu-gcc -O2 -pipe -Wall -fno-strict-aliasing -I.. -I../include -D_GNU_SOURCE -I. -I/var/tmp/portage/sys-apps/net-tools-1.60_p20110409135728/work/net-tools-1.60_p20110409135728/include -Ilib -c -o arcnet.o arcnet.c
arcnet.c: In function 'in_arcnet':
arcnet.c:55:9: warning: pointer targets in assignment differ in signedness
ia64-unknown-linux-gnu-gcc -O2 -pipe -Wall -fno-strict-aliasing -I.. -I../include -D_GNU_SOURCE -I. -I/var/tmp/portage/sys-apps/net-tools-1.60_p20110409135728/work/net-tools-1.60_p20110409135728/include -Ilib -c -o ash.o ash.c
ash.c: In function 'in_ash':
ash.c:67:9: warning: pointer targets in assignment differ in signedness
ash.c: In function 'pr_sash':
ash.c:112:5: warning: pointer targets in passing argument 1 of 'pr_ash' differ in signedness
ash.c:35:1: note: expected 'unsigned char *' but argument is of type 'char *'
ia64-unknown-linux-gnu-gcc -O2 -pipe -Wall -fno-strict-aliasing -I.. -I../include -D_GNU_SOURCE -I. -I/var/tmp/portage/sys-apps/net-tools-1.60_p20110409135728/work/net-tools-1.60_p20110409135728/include -Ilib -c -o ax25.o ax25.c
ax25.c: In function 'AX25_sprint':
ax25.c:76:33: warning: pointer targets in passing argument 1 of 'AX25_print' differ in signedness
ax25.c:50:14: note: expected 'unsigned char *' but argument is of type 'char *'
ax25.c: In function 'AX25_input':
ax25.c:87:9: warning: pointer targets in assignment differ in signedness
ia64-unknown-linux-gnu-gcc -O2 -pipe -Wall -fno-strict-aliasing -I.. -I../include -D_GNU_SOURCE -I. -I/var/tmp/portage/sys-apps/net-tools-1.60_p20110409135728/work/net-tools-1.60_p20110409135728/include -Ilib -c -o ax25_gr.o ax25_gr.c
ax25_gr.c: In function 'AX25_rprint':
ax25_gr.c:52:10: warning: ignoring return value of 'fgets', declared with attribute warn_unused_result
ia64-unknown-linux-gnu-gcc -O2 -pipe -Wall -fno-strict-aliasing -I.. -I../include -D_GNU_SOURCE -I. -I/var/tmp/portage/sys-apps/net-tools-1.60_p20110409135728/work/net-tools-1.60_p20110409135728/include -Ilib -c -o ddp.o ddp.c
In file included from /usr/include/asm/swab.h:10:0,
from /usr/include/linux/swab.h:6,
from /usr/include/linux/byteorder/little_endian.h:12,
from /usr/include/asm/byteorder.h:4,
from /usr/include/linux/atalk.h:5,
from ddp.c:21:
/usr/include/asm/intrinsics.h:21:25: fatal error: asm/cmpxchg.h: No such file or directory
compilation terminated.
make[1]: *** [ddp.o] Error 1
make[1]: Leaving directory `/var/tmp/portage/sys-apps/net-tools-1.60_p20110409135728/work/net-tools-1.60_p20110409135728/lib'
make: *** [libdir] Error 2
emake failed
* ERROR: sys-apps/net-tools-1.60_p20110409135728 failed (compile phase):
* emake failed
*
* Call stack:
* ebuild.sh, line 85: Called src_compile
* environment, line 2358: Called _eapi2_src_compile
* phase-helpers.sh, line 573: Called die
* The specific snippet of code:
* emake || die "emake failed"
*
* If you need support, post the output of `emerge --info '=sys-apps/net-tools-1.60_p20110409135728'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/net-tools-1.60_p20110409135728'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/net-tools-1.60_p20110409135728/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/net-tools-1.60_p20110409135728/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/net-tools-1.60_p20110409135728/work/net-tools-1.60_p20110409135728'
* S: '/var/tmp/portage/sys-apps/net-tools-1.60_p20110409135728/work/net-tools-1.60_p20110409135728'
* Messages for package sys-libs/timezone-data-2012c:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package app-portage/portage-utils-0.10:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package sys-apps/net-tools-1.60_p20110409135728:
* ERROR: sys-apps/net-tools-1.60_p20110409135728 failed (compile phase):
* emake failed
*
* Call stack:
* ebuild.sh, line 85: Called src_compile
* environment, line 2358: Called _eapi2_src_compile
* phase-helpers.sh, line 573: Called die
* The specific snippet of code:
* emake || die "emake failed"
*
* If you need support, post the output of `emerge --info '=sys-apps/net-tools-1.60_p20110409135728'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/net-tools-1.60_p20110409135728'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/net-tools-1.60_p20110409135728/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/net-tools-1.60_p20110409135728/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/net-tools-1.60_p20110409135728/work/net-tools-1.60_p20110409135728'
* S: '/var/tmp/portage/sys-apps/net-tools-1.60_p20110409135728/work/net-tools-1.60_p20110409135728'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1194, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 206, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1254, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1199, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage3-ia64-20120717/.catalyst_lock'
Full build log at /tmp/catalyst-auto.11276/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2013-08-28 1:09 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2013-08-28 1:09 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.14
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist kerncache pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage3
Building natively for ia64
Source path set to /var/tmp/catalyst/builds/default/stage2-ia64-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20130827/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20130827/
!!! catalyst: Cannot locate specified source_path: /var/tmp/catalyst/builds/default/stage2-ia64-latest.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 224, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/stage3_target.py", line 16, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 569, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
Full build log at /tmp/catalyst-auto.12795/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2015-02-24 7:28 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2015-02-24 7:28 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
[binary R ] sys-libs/gdbm-1.11
[binary R ] app-misc/mime-types-9
[ebuild R ] sys-devel/gcc-config-1.7.3
[ebuild R ] sys-libs/timezone-data-2014j
[ebuild R ] app-misc/editor-wrapper-4
[ebuild R ] sys-devel/binutils-config-3-r3
[ebuild R ] dev-libs/libffi-3.0.13-r1
[ebuild R ] dev-lang/python-exec-2.0.1-r1
[ebuild R ] sys-apps/which-2.20-r1
[ebuild R ] sys-apps/baselayout-2.2
[ebuild R ] sys-devel/patch-2.7.3
[ebuild N ] app-text/sgml-common-0.6.3-r5
[ebuild R ] sys-devel/autoconf-wrapper-13
[ebuild R ] sys-devel/automake-wrapper-9
[ebuild N ] dev-util/gperf-3.0.4
[ebuild R ] app-misc/pax-utils-0.8.1
[ebuild R ] virtual/libffi-3.0.13-r1
[ebuild R ] sys-apps/file-5.22
[ebuild N ] sys-libs/cracklib-2.9.1-r1
[ebuild R ] sys-apps/net-tools-1.60_p20130513023548
[ebuild R ] sys-devel/m4-1.4.16
[ebuild R ] app-portage/portage-utils-0.53
[ebuild N ] app-arch/unzip-6.0-r3
[ebuild R ] dev-libs/gmp-5.1.3-r1
[ebuild R ] sys-apps/sandbox-2.6-r1
[ebuild R ] dev-libs/mpfr-3.1.2-r1
[ebuild R ] dev-libs/mpc-1.0.1
[binary R ] dev-libs/openssl-1.0.1k
[binary R ] sys-apps/debianutils-4.4
[binary R ] app-misc/ca-certificates-20130906-r1
[ebuild R ] virtual/os-headers-0
[ebuild N ] sys-apps/sysvinit-2.88-r7
[binary R ] sys-apps/portage-2.2.14
[ebuild R ] app-admin/python-updater-0.11
[ebuild R ] virtual/package-manager-0
[ebuild R ] app-admin/eselect-python-20111108
[ebuild R ] virtual/shadow-0
[ebuild R ] virtual/pkgconfig-0-r1
[ebuild R ] sys-libs/readline-6.2_p5-r1
[ebuild N ] sys-apps/kmod-18-r1
[ebuild N ] net-firewall/iptables-1.4.21-r1
[ebuild N ] dev-libs/libpipeline-1.2.5
[ebuild N ] sys-process/procps-3.3.9
[binary R ] dev-lang/python-2.7.9-r1
[binary R ] dev-lang/python-3.3.5-r1
[ebuild N ] virtual/modutils-0
[ebuild R ] virtual/perl-File-Temp-0.230.400-r2
[ebuild R ] virtual/perl-Data-Dumper-2.154.0
[ebuild N ] virtual/perl-CPAN-Meta-YAML-0.12.0
[ebuild R ] app-admin/perl-cleaner-2.19
[ebuild N ] virtual/perl-version-0.990.900-r1
[ebuild N ] virtual/perl-Text-ParseWords-3.290.0-r1
[ebuild N ] virtual/perl-Test-Simple-1.1.2
[ebuild N ] virtual/perl-Test-Harness-3.330.0
[ebuild N ] virtual/perl-Perl-OSType-1.7.0
[ebuild N ] virtual/perl-Parse-CPAN-Meta-1.441.400
[ebuild N ] virtual/perl-Module-Metadata-1.0.19
[ebuild N ] virtual/perl-Getopt-Long-2.420.0-r1
[ebuild N ] virtual/perl-File-Spec-3.480.0
[ebuild N ] virtual/perl-ExtUtils-ParseXS-3.240.0
[ebuild N ] virtual/perl-ExtUtils-Manifest-1.630.0-r1
[ebuild N ] virtual/perl-ExtUtils-Install-1.670.0
[ebuild N ] virtual/perl-ExtUtils-CBuilder-0.280.217-r1
[ebuild N ] virtual/perl-JSON-PP-2.272.30
[ebuild N ] virtual/perl-CPAN-Meta-2.140.640
[ebuild N ] virtual/perl-Archive-Tar-1.960.0
[ebuild R ] sys-libs/glibc-2.19-r1
[ebuild R ] virtual/libc-0
[ebuild R ] sys-kernel/linux-headers-3.16
[ebuild N ] sys-libs/db-4.8.30-r2
[ebuild R ] dev-lang/perl-5.20.1-r4
[ebuild R ] sys-devel/autoconf-2.69
[ebuild N ] dev-util/gtk-doc-am-1.21
[ebuild N ] dev-perl/SGMLSpm-1.03-r7
[ebuild N ] dev-perl/TermReadKey-2.300.200-r1
[ebuild N ] dev-perl/Text-CharWidth-0.40.0-r1
[ebuild N ] dev-perl/XML-Parser-2.410.0-r2
[ebuild N ] perl-core/Module-Build-0.420.500
[ebuild R ] perl-core/File-Temp-0.230.400-r1
[ebuild R ] perl-core/Data-Dumper-2.154.0
[ebuild N ] dev-perl/Text-WrapI18N-0.60.0-r1
[ebuild N ] virtual/perl-Module-Build-0.420.500-r1
[ebuild N ] dev-util/intltool-0.50.2-r1
[ebuild R ] sys-devel/binutils-2.24-r3
[ebuild N ] dev-libs/libpcre-8.35
[ebuild R ] sys-apps/less-458
[ebuild N ] virtual/pager-0
[ebuild R ] virtual/editor-0
[ebuild N ] sys-apps/attr-2.4.47-r1
[ebuild N ] sys-apps/acl-2.2.52-r1
[ebuild R ] sys-apps/coreutils-8.21
[ebuild N ] virtual/acl-0-r1
[ebuild R ] sys-apps/sed-4.2.1-r1
[ebuild R ] app-admin/eselect-1.4.3
[ebuild R ] sys-apps/texinfo-4.13-r2
[ebuild N ] sys-process/psmisc-22.20
[ebuild R ] sys-devel/make-4.0-r1
[ebuild R ] dev-libs/popt-1.16-r2
[ebuild R ] net-misc/rsync-3.0.9-r3
[ebuild N ] sys-libs/e2fsprogs-libs-1.42.12
[ebuild N ] sys-apps/groff-1.22.2
[ebuild R ] sys-devel/gettext-0.19.3
[ebuild R ] sys-apps/findutils-4.4.2-r1
[ebuild R ] sys-apps/grep-2.21-r1
[ebuild R ] sys-apps/gawk-4.0.2
[ebuild R ] app-arch/tar-1.27.1-r2
[ebuild R ] app-arch/gzip-1.5
[ebuild R ] sys-apps/diffutils-3.3
[ebuild R ] sys-devel/flex-2.5.39-r1
[ebuild R ] sys-devel/bison-2.4.3
[ebuild N ] dev-perl/Locale-gettext-1.50.0-r1
[ebuild N ] dev-libs/libgpg-error-1.13
[ebuild N ] app-text/opensp-1.5.2-r3
[ebuild R ] sys-devel/gcc-4.7.3-r1
[ebuild N ] sys-apps/iproute2-3.8.0
[ebuild R ] virtual/yacc-0
[ebuild N ] dev-libs/elfutils-0.158
[ebuild N ] sys-apps/help2man-1.45.1
[ebuild R ] app-shells/bash-4.2_p53
[ebuild R ] sys-devel/automake-1.13.4
[ebuild R ] sys-devel/libtool-2.4.2-r1
[ebuild R ] app-editors/nano-2.3.2
[ebuild R ] net-misc/wget-1.16
[ebuild R ] dev-libs/libxml2-2.9.2
[ebuild N ] app-text/openjade-1.3.2-r6
[ebuild N ] dev-libs/libgcrypt-1.5.4-r1
[ebuild N ] dev-libs/libxslt-1.1.28-r4
[ebuild N ] sys-libs/pam-1.1.8-r2
[ebuild N ] sys-auth/pambase-20120417-r3
[ebuild N ] virtual/pam-0-r1
[ebuild N ] sys-apps/util-linux-2.24.1-r3
[ebuild N ] sys-apps/busybox-1.23.1
[ebuild R ] sys-apps/shadow-4.1.5.1-r1
[ebuild N ] net-misc/openssh-6.7_p1
[ebuild N ] sys-apps/kbd-1.15.5-r1
[ebuild N ] sys-fs/e2fsprogs-1.42.12
[ebuild N ] sys-libs/libcap-2.22-r2
[ebuild N ] app-text/build-docbook-catalog-1.19.1
[ebuild N ] virtual/ssh-0
[ebuild N ] net-misc/iputils-20121221-r1
[ebuild N ] app-text/docbook-xsl-stylesheets-1.78.0
[ebuild N ] app-text/docbook-xml-dtd-4.1.2-r6
[ebuild N ] app-text/po4a-0.45-r1
[ebuild N ] sys-apps/man-db-2.6.6
[ebuild N ] virtual/man-0-r1
[ebuild N ] sys-apps/man-pages-posix-2013a
[ebuild N ] sys-apps/man-pages-3.78
[ebuild N ] sys-apps/openrc-0.13.11
[ebuild N ] net-misc/netifrc-0.2.2
[ebuild N ] virtual/service-manager-0
[ebuild N ] sys-fs/udev-216
[ebuild N ] virtual/udev-215
[ebuild N ] sys-apps/hwids-20141010
[ebuild N ] sys-fs/udev-init-scripts-26-r2
[ebuild N ] virtual/dev-manager-0
[ebuild N ] dev-libs/glib-2.40.2
[ebuild N ] x11-misc/shared-mime-info-1.2-r1
[ebuild R ] dev-util/pkgconfig-0.28-r1
[blocks B ] <sys-process/procps-3.3.9-r2 ("<sys-process/procps-3.3.9-r2" is blocking sys-apps/openrc-0.13.11)
[blocks B ] <sys-fs/udev-init-scripts-27 ("<sys-fs/udev-init-scripts-27" is blocking sys-apps/openrc-0.13.11)
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
(sys-process/procps-3.3.9:0/0::gentoo, ebuild scheduled for merge) pulled in by
sys-process/procps required by @system
(sys-apps/openrc-0.13.11:0/0::gentoo, ebuild scheduled for merge) pulled in by
sys-apps/openrc required by @system
sys-apps/openrc required by (virtual/service-manager-0:0/0::gentoo, ebuild scheduled for merge)
>=sys-apps/openrc-0.12 required by (net-misc/netifrc-0.2.2:0/0::gentoo, ebuild scheduled for merge)
(sys-fs/udev-init-scripts-26-r2:0/0::gentoo, ebuild scheduled for merge) pulled in by
>=sys-fs/udev-init-scripts-26 required by (sys-fs/udev-216:0/0::gentoo, ebuild scheduled for merge)
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage3-ia64-20150224/.catalyst_lock'
Full build log at /tmp/catalyst-auto.g0E29w/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2016-01-12 12:19 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2016-01-12 12:19 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: error: '__NR_kcmp' undeclared (first use in this function)
return syscall(__NR_kcmp, pid1, pid2, type, idx1, idx2);
^
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: note: each undeclared identifier is reported only once for each function it appears in
Makefile:13318: recipe for target 'src/libudev/libudev.lo' failed
make: *** [src/libudev/libudev.lo] Error 1
make: *** Waiting for unfinished jobs....
In file included from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/util.h:46:0,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev-private.h:29,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev-list.c:25:
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h: In function 'kcmp':
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: error: '__NR_kcmp' undeclared (first use in this function)
return syscall(__NR_kcmp, pid1, pid2, type, idx1, idx2);
^
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: note: each undeclared identifier is reported only once for each function it appears in
In file included from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/util.h:46:0,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libsystemd/sd-device/device-util.h:24,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev-device.c:38:
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h: In function 'kcmp':
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: error: '__NR_kcmp' undeclared (first use in this function)
return syscall(__NR_kcmp, pid1, pid2, type, idx1, idx2);
^
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: note: each undeclared identifier is reported only once for each function it appears in
In file included from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/util.h:46:0,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev-private.h:29,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev-util.c:29:
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h: In function 'kcmp':
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: error: '__NR_kcmp' undeclared (first use in this function)
return syscall(__NR_kcmp, pid1, pid2, type, idx1, idx2);
^
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: note: each undeclared identifier is reported only once for each function it appears in
Makefile:13318: recipe for target 'src/libudev/libudev-list.lo' failed
make: *** [src/libudev/libudev-list.lo] Error 1
Makefile:13318: recipe for target 'src/libudev/libudev-device.lo' failed
make: *** [src/libudev/libudev-device.lo] Error 1
Makefile:13318: recipe for target 'src/libudev/libudev-util.lo' failed
make: *** [src/libudev/libudev-util.lo] Error 1
* ERROR: sys-fs/udev-225::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/udev-225::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/udev-225::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/udev-225/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/udev-225/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/udev-225/work/systemd-225-.ia64'
* S: '/var/tmp/portage/sys-fs/udev-225/work/systemd-225'
* Messages for package sys-libs/timezone-data-2015f:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-apps/baselayout-2.2:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package sys-apps/sysvinit-2.88-r7:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package sys-apps/busybox-1.24.1:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.24.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.24.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package sys-libs/glibc-2.21-r1:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-apps/coreutils-8.23:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/less-481:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package sys-devel/gcc-4.9.3:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package sys-libs/pam-1.2.1:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-apps/util-linux-2.26.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-apps/man-db-2.7.2:
* Defaulting to USE=gdbm due to ambiguous berkdb/gdbm USE flag settings
* Messages for package sys-apps/openrc-0.18.4:
* Auto-adding 'termencoding' service to your boot runlevel
* Auto-adding 'swapfiles' service to your boot runlevel
* Auto-adding 'sysfs' service to your sysinit runlevel
* Auto-adding 'tmpfiles.setup' service to your boot runlevel
* Auto-adding 'loopback' service to your boot runlevel
* Auto-adding 'tmpfiles.dev' service to your sysinit runlevel
* Auto-adding 'binfmt' service to your boot runlevel
* Auto-adding 'mtab' service to your boot runlevel
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package net-misc/netifrc-0.2.2:
* The network configuration scripts will use dhcp by
* default to set up your interfaces.
* If you need to set up something more complete, see
* //usr/share/doc/netifrc-0.2.2/README
* Messages for package sys-fs/udev-225:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* CONFIG_IDE: should not be set. But it is.
* CONFIG_FHANDLE: is not set when it should be.
* CONFIG_FW_LOADER_USER_HELPER: should not be set. But it is.
* Please check to make sure these options are set correctly.
* Failure to do so may cause unexpected problems.
* ERROR: sys-fs/udev-225::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/udev-225::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/udev-225::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/udev-225/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/udev-225/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/udev-225/work/systemd-225-.ia64'
* S: '/var/tmp/portage/sys-fs/udev-225/work/systemd-225'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage3-ia64-20160112/.catalyst_lock'
Full build log at /tmp/catalyst-auto.ezcqqw/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2016-01-26 12:48 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2016-01-26 12:48 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: error: '__NR_kcmp' undeclared (first use in this function)
return syscall(__NR_kcmp, pid1, pid2, type, idx1, idx2);
^
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: note: each undeclared identifier is reported only once for each function it appears in
Makefile:13318: recipe for target 'src/libudev/libudev-list.lo' failed
make: *** [src/libudev/libudev-list.lo] Error 1
make: *** Waiting for unfinished jobs....
In file included from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/util.h:46:0,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libsystemd/sd-device/device-util.h:24,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev-device.c:38:
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h: In function 'kcmp':
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: error: '__NR_kcmp' undeclared (first use in this function)
return syscall(__NR_kcmp, pid1, pid2, type, idx1, idx2);
^
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: note: each undeclared identifier is reported only once for each function it appears in
Makefile:13318: recipe for target 'src/libudev/libudev-device.lo' failed
make: *** [src/libudev/libudev-device.lo] Error 1
In file included from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/util.h:46:0,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev-private.h:29,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev-util.c:29:
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h: In function 'kcmp':
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: error: '__NR_kcmp' undeclared (first use in this function)
return syscall(__NR_kcmp, pid1, pid2, type, idx1, idx2);
^
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: note: each undeclared identifier is reported only once for each function it appears in
In file included from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/util.h:46:0,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev-private.h:29,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev.c:28:
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h: In function 'kcmp':
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: error: '__NR_kcmp' undeclared (first use in this function)
return syscall(__NR_kcmp, pid1, pid2, type, idx1, idx2);
^
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: note: each undeclared identifier is reported only once for each function it appears in
Makefile:13318: recipe for target 'src/libudev/libudev-util.lo' failed
make: *** [src/libudev/libudev-util.lo] Error 1
Makefile:13318: recipe for target 'src/libudev/libudev.lo' failed
make: *** [src/libudev/libudev.lo] Error 1
* ERROR: sys-fs/udev-225::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/udev-225::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/udev-225::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/udev-225/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/udev-225/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/udev-225/work/systemd-225-.ia64'
* S: '/var/tmp/portage/sys-fs/udev-225/work/systemd-225'
* Messages for package sys-libs/timezone-data-2015f:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-apps/baselayout-2.2:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package sys-apps/sysvinit-2.88-r7:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package sys-apps/busybox-1.24.1:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.24.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.24.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package sys-apps/coreutils-8.23:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-libs/glibc-2.21-r1:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-apps/less-481:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package sys-devel/gcc-4.9.3:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package sys-libs/pam-1.2.1:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-apps/util-linux-2.26.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-apps/man-db-2.7.2:
* Defaulting to USE=gdbm due to ambiguous berkdb/gdbm USE flag settings
* Messages for package sys-apps/openrc-0.18.4:
* Auto-adding 'termencoding' service to your boot runlevel
* Auto-adding 'swapfiles' service to your boot runlevel
* Auto-adding 'sysfs' service to your sysinit runlevel
* Auto-adding 'tmpfiles.setup' service to your boot runlevel
* Auto-adding 'loopback' service to your boot runlevel
* Auto-adding 'tmpfiles.dev' service to your sysinit runlevel
* Auto-adding 'binfmt' service to your boot runlevel
* Auto-adding 'mtab' service to your boot runlevel
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package net-misc/netifrc-0.2.2:
* The network configuration scripts will use dhcp by
* default to set up your interfaces.
* If you need to set up something more complete, see
* //usr/share/doc/netifrc-0.2.2/README
* Messages for package sys-fs/udev-225:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* CONFIG_IDE: should not be set. But it is.
* CONFIG_FHANDLE: is not set when it should be.
* CONFIG_FW_LOADER_USER_HELPER: should not be set. But it is.
* Please check to make sure these options are set correctly.
* Failure to do so may cause unexpected problems.
* ERROR: sys-fs/udev-225::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/udev-225::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/udev-225::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/udev-225/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/udev-225/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/udev-225/work/systemd-225-.ia64'
* S: '/var/tmp/portage/sys-fs/udev-225/work/systemd-225'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage3-ia64-20160126/.catalyst_lock'
Full build log at /tmp/catalyst-auto.vVp9RT/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2016-02-02 13:01 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2016-02-02 13:01 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: error: '__NR_kcmp' undeclared (first use in this function)
return syscall(__NR_kcmp, pid1, pid2, type, idx1, idx2);
^
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: note: each undeclared identifier is reported only once for each function it appears in
Makefile:13318: recipe for target 'src/libudev/libudev-list.lo' failed
make: *** [src/libudev/libudev-list.lo] Error 1
make: *** Waiting for unfinished jobs....
In file included from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/util.h:46:0,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev-private.h:29,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev.c:28:
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h: In function 'kcmp':
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: error: '__NR_kcmp' undeclared (first use in this function)
return syscall(__NR_kcmp, pid1, pid2, type, idx1, idx2);
^
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: note: each undeclared identifier is reported only once for each function it appears in
Makefile:13318: recipe for target 'src/libudev/libudev.lo' failed
make: *** [src/libudev/libudev.lo] Error 1
In file included from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/util.h:46:0,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libsystemd/sd-device/device-util.h:24,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev-device.c:38:
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h: In function 'kcmp':
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: error: '__NR_kcmp' undeclared (first use in this function)
return syscall(__NR_kcmp, pid1, pid2, type, idx1, idx2);
^
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: note: each undeclared identifier is reported only once for each function it appears in
Makefile:13318: recipe for target 'src/libudev/libudev-device.lo' failed
make: *** [src/libudev/libudev-device.lo] Error 1
In file included from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/util.h:46:0,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev-private.h:29,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev-util.c:29:
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h: In function 'kcmp':
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: error: '__NR_kcmp' undeclared (first use in this function)
return syscall(__NR_kcmp, pid1, pid2, type, idx1, idx2);
^
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: note: each undeclared identifier is reported only once for each function it appears in
Makefile:13318: recipe for target 'src/libudev/libudev-util.lo' failed
make: *** [src/libudev/libudev-util.lo] Error 1
* ERROR: sys-fs/udev-225::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/udev-225::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/udev-225::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/udev-225/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/udev-225/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/udev-225/work/systemd-225-.ia64'
* S: '/var/tmp/portage/sys-fs/udev-225/work/systemd-225'
* Messages for package sys-libs/timezone-data-2015f:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-apps/baselayout-2.2:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package sys-apps/sysvinit-2.88-r7:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package sys-apps/busybox-1.24.1:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.24.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.24.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package sys-apps/coreutils-8.23:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/less-481:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package sys-libs/glibc-2.21-r1:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-devel/gcc-4.9.3:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package sys-libs/pam-1.2.1:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-apps/util-linux-2.26.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-apps/man-db-2.7.2:
* Defaulting to USE=gdbm due to ambiguous berkdb/gdbm USE flag settings
* Messages for package sys-apps/openrc-0.18.4:
* Auto-adding 'termencoding' service to your boot runlevel
* Auto-adding 'swapfiles' service to your boot runlevel
* Auto-adding 'sysfs' service to your sysinit runlevel
* Auto-adding 'tmpfiles.setup' service to your boot runlevel
* Auto-adding 'loopback' service to your boot runlevel
* Auto-adding 'tmpfiles.dev' service to your sysinit runlevel
* Auto-adding 'binfmt' service to your boot runlevel
* Auto-adding 'mtab' service to your boot runlevel
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package net-misc/netifrc-0.2.2:
* The network configuration scripts will use dhcp by
* default to set up your interfaces.
* If you need to set up something more complete, see
* //usr/share/doc/netifrc-0.2.2/README
* Messages for package sys-fs/udev-225:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* CONFIG_IDE: should not be set. But it is.
* CONFIG_FHANDLE: is not set when it should be.
* CONFIG_FW_LOADER_USER_HELPER: should not be set. But it is.
* Please check to make sure these options are set correctly.
* Failure to do so may cause unexpected problems.
* ERROR: sys-fs/udev-225::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/udev-225::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/udev-225::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/udev-225/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/udev-225/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/udev-225/work/systemd-225-.ia64'
* S: '/var/tmp/portage/sys-fs/udev-225/work/systemd-225'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage3-ia64-20160202/.catalyst_lock'
Full build log at /tmp/catalyst-auto.fWiVqj/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2016-02-09 13:05 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2016-02-09 13:05 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: error: '__NR_kcmp' undeclared (first use in this function)
return syscall(__NR_kcmp, pid1, pid2, type, idx1, idx2);
^
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: note: each undeclared identifier is reported only once for each function it appears in
Makefile:13318: recipe for target 'src/libudev/libudev-device.lo' failed
make: *** [src/libudev/libudev-device.lo] Error 1
make: *** Waiting for unfinished jobs....
In file included from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/util.h:46:0,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev-private.h:29,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev-list.c:25:
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h: In function 'kcmp':
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: error: '__NR_kcmp' undeclared (first use in this function)
return syscall(__NR_kcmp, pid1, pid2, type, idx1, idx2);
^
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: note: each undeclared identifier is reported only once for each function it appears in
In file included from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/util.h:46:0,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev-private.h:29,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev.c:28:
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h: In function 'kcmp':
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: error: '__NR_kcmp' undeclared (first use in this function)
return syscall(__NR_kcmp, pid1, pid2, type, idx1, idx2);
^
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: note: each undeclared identifier is reported only once for each function it appears in
In file included from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/util.h:46:0,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev-private.h:29,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev-util.c:29:
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h: In function 'kcmp':
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: error: '__NR_kcmp' undeclared (first use in this function)
return syscall(__NR_kcmp, pid1, pid2, type, idx1, idx2);
^
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: note: each undeclared identifier is reported only once for each function it appears in
Makefile:13318: recipe for target 'src/libudev/libudev-list.lo' failed
make: *** [src/libudev/libudev-list.lo] Error 1
Makefile:13318: recipe for target 'src/libudev/libudev.lo' failed
make: *** [src/libudev/libudev.lo] Error 1
Makefile:13318: recipe for target 'src/libudev/libudev-util.lo' failed
make: *** [src/libudev/libudev-util.lo] Error 1
* ERROR: sys-fs/udev-225::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/udev-225::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/udev-225::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/udev-225/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/udev-225/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/udev-225/work/systemd-225-.ia64'
* S: '/var/tmp/portage/sys-fs/udev-225/work/systemd-225'
* Messages for package sys-libs/timezone-data-2015g:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-apps/baselayout-2.2:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package sys-apps/sysvinit-2.88-r7:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package sys-apps/busybox-1.24.1:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.24.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.24.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package sys-apps/coreutils-8.23:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-libs/glibc-2.21-r1:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-apps/less-481:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package sys-devel/gcc-4.9.3:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package sys-libs/pam-1.2.1:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-apps/util-linux-2.26.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-apps/man-db-2.7.2:
* Defaulting to USE=gdbm due to ambiguous berkdb/gdbm USE flag settings
* Messages for package sys-apps/openrc-0.18.4:
* Auto-adding 'termencoding' service to your boot runlevel
* Auto-adding 'swapfiles' service to your boot runlevel
* Auto-adding 'sysfs' service to your sysinit runlevel
* Auto-adding 'tmpfiles.setup' service to your boot runlevel
* Auto-adding 'loopback' service to your boot runlevel
* Auto-adding 'tmpfiles.dev' service to your sysinit runlevel
* Auto-adding 'binfmt' service to your boot runlevel
* Auto-adding 'mtab' service to your boot runlevel
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package net-misc/netifrc-0.2.2:
* The network configuration scripts will use dhcp by
* default to set up your interfaces.
* If you need to set up something more complete, see
* //usr/share/doc/netifrc-0.2.2/README
* Messages for package sys-fs/udev-225:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* CONFIG_IDE: should not be set. But it is.
* CONFIG_FHANDLE: is not set when it should be.
* CONFIG_FW_LOADER_USER_HELPER: should not be set. But it is.
* Please check to make sure these options are set correctly.
* Failure to do so may cause unexpected problems.
* ERROR: sys-fs/udev-225::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/udev-225::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/udev-225::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/udev-225/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/udev-225/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/udev-225/work/systemd-225-.ia64'
* S: '/var/tmp/portage/sys-fs/udev-225/work/systemd-225'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage3-ia64-20160209/.catalyst_lock'
Full build log at /tmp/catalyst-auto.CoRrLO/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2016-02-16 12:59 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2016-02-16 12:59 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: note: each undeclared identifier is reported only once for each function it appears in
libtool: compile: ia64-unknown-linux-gnu-gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I/var/tmp/portage/sys-fs/udev-225/work/systemd-225 -include ./config.h -DPKGSYSCONFDIR=\"/etc/systemd\" -DSYSTEM_CONFIG_UNIT_PATH=\"/etc/systemd/system\" -DSYSTEM_DATA_UNIT_PATH=\"/lib/systemd/system\" -DSYSTEM_SYSVINIT_PATH=\"/etc/init.d\" -DSYSTEM_SYSVRCND_PATH=\"/etc/rc.d\" -DUSER_CONFIG_UNIT_PATH=\"/etc/systemd/user\" -DUSER_DATA_UNIT_PATH=\"/usr/lib/systemd/user\" -DCERTIFICATE_ROOT=\"/etc/ssl\" -DCATALOG_DATABASE=\"/var/lib/lib/systemd/catalog/database\" -DSYSTEMD_CGROUP_AGENT_PATH=\"/lib/systemd/systemd-cgroups-agent\" -DSYSTEMD_BINARY_PATH=\"/lib/systemd/systemd\" -DSYSTEMD_FSCK_PATH=\"/lib/systemd/systemd-fsck\" -DSYSTEMD_SHUTDOWN_BINARY_PATH=\"/lib/systemd/systemd-shutdown\" -DSYSTEMD_SLEEP_BINARY_PATH=\"/lib/systemd/systemd-sleep\" -DSYSTEMCTL_BINARY_PATH=\"/bin/systemctl\" -DSYSTEMD_TTY_ASK_PASSWORD_AGENT_BINARY_PATH=\"/bin/systemd-tty-ask-password-agent\" -DSYSTEMD_STDIO_BRIDGE_BINARY_PATH=\"/u
sr/bin/systemd-stdio-bridge\" -DROOTPREFIX=\"\" -DRANDOM_SEED_DIR=\"/var/lib/lib/systemd/\" -DRANDOM_SEED=\"/var/lib/lib/systemd/random-seed\" -DSYSTEMD_CRYPTSETUP_PATH=\"/lib/systemd/systemd-cryptsetup\" -DSYSTEM_GENERATOR_PATH=\"/lib/systemd/system-generators\" -DUSER_GENERATOR_PATH=\"/usr/lib/systemd/user-generators\" -DSYSTEM_SHUTDOWN_PATH=\"/lib/systemd/system-shutdown\" -DSYSTEM_SLEEP_PATH=\"/lib/systemd/system-sleep\" -DSYSTEMD_KBD_MODEL_MAP=\"/usr/share/systemd/kbd-model-map\" -DSYSTEMD_LANGUAGE_FALLBACK_MAP=\"/usr/share/systemd/language-fallback-map\" -DUDEVLIBEXECDIR=\"/lib/udev\" -DPOLKIT_AGENT_BINARY_PATH=\"/usr/bin/pkttyagent\" -DQUOTACHECK=\"/usr/sbin/quotacheck\" -DKEXEC=\"/usr/sbin/kexec\" -DMOUNT_PATH=\"/bin/mount\" -DUMOUNT_PATH=\"/bin/umount\" -DLIBDIR=\"/usr/lib\" -DROOTLIBDIR=\"/lib\" -DROOTLIBEXECDIR=\"/lib/systemd\" -DTEST_DIR=\"/var/tmp/portage/sys-fs/udev-225/work/systemd-225/test\" -I /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src -I ./src/basic -I /
var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0
p/portage/sys-fs/udev-225/work/systemd-225/src/libsystemd/sd-event -I /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libsystemd/sd-login -I /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libsystemd/sd-netlink -I /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libsystemd/sd-network -I /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libsystemd/sd-hwdb -I /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libsystemd/sd-device -I /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libsystemd-network -pipe -Wall -Wextra -Wundef -Wformat=2 -Wformat-security -Wformat-nonliteral -Wlogical-op -Wmissing-include-dirs -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wsuggest-attribute=noreturn -Werror=missing-prototypes -Werror=implicit-function-declaration -Werror=missing-declarations -Werror=return-type -Wstrict-prototypes -Wredundant-decls -Wmissing-noreturn -Wshadow -Wendif-labels -Wstrict-aliasing=2 -Wwrite-strin
gs -Wno-unused-parameter -Wno-missing-field-initializers -Wno-unused-result -Werror=overflow -Wdate-time -Wn\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0
cc1: warning: ./src/shared: No such file or directory
cc1: warning: ./src/shared: No such file or directory
Makefile:13318: recipe for target 'src/libudev/libudev.lo' failed
make: *** [src/libudev/libudev.lo] Error 1
make: *** Waiting for unfinished jobs....
In file included from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/util.h:46:0,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev-private.h:29,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev-list.c:25:
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h: In function 'kcmp':
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: error: '__NR_kcmp' undeclared (first use in this function)
return syscall(__NR_kcmp, pid1, pid2, type, idx1, idx2);
^
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: note: each undeclared identifier is reported only once for each function it appears in
In file included from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/util.h:46:0,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libsystemd/sd-device/device-util.h:24,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev-device.c:38:
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h: In function 'kcmp':
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: error: '__NR_kcmp' undeclared (first use in this function)
return syscall(__NR_kcmp, pid1, pid2, type, idx1, idx2);
^
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: note: each undeclared identifier is reported only once for each function it appears in
Makefile:13318: recipe for target 'src/libudev/libudev-list.lo' failed
make: *** [src/libudev/libudev-list.lo] Error 1
In file included from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/util.h:46:0,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev-private.h:29,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev-util.c:29:
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h: In function 'kcmp':
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: error: '__NR_kcmp' undeclared (first use in this function)
return syscall(__NR_kcmp, pid1, pid2, type, idx1, idx2);
^
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: note: each undeclared identifier is reported only once for each function it appears in
Makefile:13318: recipe for target 'src/libudev/libudev-util.lo' failed
make: *** [src/libudev/libudev-util.lo] Error 1
Makefile:13318: recipe for target 'src/libudev/libudev-device.lo' failed
make: *** [src/libudev/libudev-device.lo] Error 1
* ERROR: sys-fs/udev-225::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/udev-225::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/udev-225::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/udev-225/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/udev-225/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/udev-225/work/systemd-225-.ia64'
* S: '/var/tmp/portage/sys-fs/udev-225/work/systemd-225'
* Messages for package sys-libs/timezone-data-2015g:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-apps/baselayout-2.2:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package sys-apps/sysvinit-2.88-r7:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package sys-apps/less-481:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package sys-apps/busybox-1.24.1:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.24.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.24.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package sys-apps/coreutils-8.23:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-libs/glibc-2.21-r1:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-devel/gcc-4.9.3:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package sys-libs/pam-1.2.1:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-apps/util-linux-2.26.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-apps/man-db-2.7.2:
* Defaulting to USE=gdbm due to ambiguous berkdb/gdbm USE flag settings
* Messages for package sys-apps/openrc-0.18.4:
* Auto-adding 'termencoding' service to your boot runlevel
* Auto-adding 'swapfiles' service to your boot runlevel
* Auto-adding 'sysfs' service to your sysinit runlevel
* Auto-adding 'tmpfiles.setup' service to your boot runlevel
* Auto-adding 'loopback' service to your boot runlevel
* Auto-adding 'tmpfiles.dev' service to your sysinit runlevel
* Auto-adding 'binfmt' service to your boot runlevel
* Auto-adding 'mtab' service to your boot runlevel
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package net-misc/netifrc-0.2.2:
* The network configuration scripts will use dhcp by
* default to set up your interfaces.
* If you need to set up something more complete, see
* //usr/share/doc/netifrc-0.2.2/README
* Messages for package sys-fs/udev-225:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* CONFIG_IDE: should not be set. But it is.
* CONFIG_FHANDLE: is not set when it should be.
* CONFIG_FW_LOADER_USER_HELPER: should not be set. But it is.
* Please check to make sure these options are set correctly.
* Failure to do so may cause unexpected problems.
* ERROR: sys-fs/udev-225::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/udev-225::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/udev-225::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/udev-225/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/udev-225/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/udev-225/work/systemd-225-.ia64'
* S: '/var/tmp/portage/sys-fs/udev-225/work/systemd-225'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage3-ia64-20160216/.catalyst_lock'
Full build log at /tmp/catalyst-auto.b6zbBu/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2016-02-23 13:33 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2016-02-23 13:33 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: error: '__NR_kcmp' undeclared (first use in this function)
return syscall(__NR_kcmp, pid1, pid2, type, idx1, idx2);
^
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: note: each undeclared identifier is reported only once for each function it appears in
Makefile:13318: recipe for target 'src/libudev/libudev.lo' failed
make: *** [src/libudev/libudev.lo] Error 1
make: *** Waiting for unfinished jobs....
In file included from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/util.h:46:0,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev-private.h:29,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev-list.c:25:
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h: In function 'kcmp':
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: error: '__NR_kcmp' undeclared (first use in this function)
return syscall(__NR_kcmp, pid1, pid2, type, idx1, idx2);
^
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: note: each undeclared identifier is reported only once for each function it appears in
Makefile:13318: recipe for target 'src/libudev/libudev-list.lo' failed
make: *** [src/libudev/libudev-list.lo] Error 1
In file included from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/util.h:46:0,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libsystemd/sd-device/device-util.h:24,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev-device.c:38:
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h: In function 'kcmp':
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: error: '__NR_kcmp' undeclared (first use in this function)
return syscall(__NR_kcmp, pid1, pid2, type, idx1, idx2);
^
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: note: each undeclared identifier is reported only once for each function it appears in
In file included from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/util.h:46:0,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev-private.h:29,
from /var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/libudev/libudev-util.c:29:
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h: In function 'kcmp':
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: error: '__NR_kcmp' undeclared (first use in this function)
return syscall(__NR_kcmp, pid1, pid2, type, idx1, idx2);
^
/var/tmp/portage/sys-fs/udev-225/work/systemd-225/src/basic/missing.h:1023:24: note: each undeclared identifier is reported only once for each function it appears in
Makefile:13318: recipe for target 'src/libudev/libudev-device.lo' failed
make: *** [src/libudev/libudev-device.lo] Error 1
Makefile:13318: recipe for target 'src/libudev/libudev-util.lo' failed
make: *** [src/libudev/libudev-util.lo] Error 1
* ERROR: sys-fs/udev-225::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/udev-225::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/udev-225::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/udev-225/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/udev-225/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/udev-225/work/systemd-225-.ia64'
* S: '/var/tmp/portage/sys-fs/udev-225/work/systemd-225'
* Messages for package sys-libs/timezone-data-2015g:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-apps/baselayout-2.2:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package sys-apps/sysvinit-2.88-r7:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package sys-apps/less-481:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package sys-apps/busybox-1.24.1:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.24.1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.24.1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package sys-apps/coreutils-8.23:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-libs/glibc-2.21-r2:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-devel/gcc-4.9.3:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package sys-libs/pam-1.2.1:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-apps/util-linux-2.26.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-apps/man-db-2.7.2:
* Defaulting to USE=gdbm due to ambiguous berkdb/gdbm USE flag settings
* Messages for package sys-apps/openrc-0.18.4:
* Auto-adding 'termencoding' service to your boot runlevel
* Auto-adding 'swapfiles' service to your boot runlevel
* Auto-adding 'sysfs' service to your sysinit runlevel
* Auto-adding 'tmpfiles.setup' service to your boot runlevel
* Auto-adding 'loopback' service to your boot runlevel
* Auto-adding 'tmpfiles.dev' service to your sysinit runlevel
* Auto-adding 'binfmt' service to your boot runlevel
* Auto-adding 'mtab' service to your boot runlevel
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
* Messages for package net-misc/netifrc-0.2.2:
* The network configuration scripts will use dhcp by
* default to set up your interfaces.
* If you need to set up something more complete, see
* //usr/share/doc/netifrc-0.2.2/README
* Messages for package sys-fs/udev-225:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* CONFIG_IDE: should not be set. But it is.
* CONFIG_FHANDLE: is not set when it should be.
* CONFIG_FW_LOADER_USER_HELPER: should not be set. But it is.
* Please check to make sure these options are set correctly.
* Failure to do so may cause unexpected problems.
* ERROR: sys-fs/udev-225::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/udev-225::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/udev-225::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/udev-225/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/udev-225/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/udev-225/work/systemd-225-.ia64'
* S: '/var/tmp/portage/sys-fs/udev-225/work/systemd-225'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage3-ia64-20160223/.catalyst_lock'
Full build log at /tmp/catalyst-auto.3fAobv/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2018-01-28 13:11 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2018-01-28 13:11 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /home/catalyst/builds/default/stage2-ia64-20180128T031003Z.tar.bz2
Caching snapshot to /home/catalyst/snapshot_cache/20180128T031003Z/
The autoresume path is /home/catalyst/tmp/default/.autoresume-stage3-ia64-20180128T031003Z/
Location of the package cache is /home/catalyst/packages/default/stage3-ia64-20180128T031003Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /home/catalyst/tmp/default/.autoresume-stage3-ia64-20180128T031003Z/
--- Running action sequence: unpack
Starting rsync from /home/catalyst/tmp/default/stage2-ia64-20180128T031003Z/
to /home/catalyst/tmp/default/stage3-ia64-20180128T031003Z/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /home/catalyst/tmp/default/stage3-ia64-20180128T031003Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/stage3-ia64-20180128T031003Z//tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot /home/catalyst/tmp/default/stage3-ia64-20180128T031003Z/
>>> Regenerating /etc/ld.so.cache...
Updating portage with USE=""
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 16) app-misc/mime-types-9::gentoo
>>> Installing (1 of 16) app-misc/mime-types-9::gentoo
>>> Emerging (2 of 16) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (2 of 16) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging (3 of 16) sys-apps/install-xattr-0.5::gentoo
>>> Installing (3 of 16) sys-apps/install-xattr-0.5::gentoo
>>> Emerging (4 of 16) sys-apps/debianutils-4.8.3::gentoo
>>> Installing (4 of 16) sys-apps/debianutils-4.8.3::gentoo
>>> Emerging (5 of 16) app-arch/unzip-6.0_p21-r2::gentoo
>>> Installing (5 of 16) app-arch/unzip-6.0_p21-r2::gentoo
>>> Emerging (6 of 16) sys-apps/attr-2.4.47-r2::gentoo
>>> Installing (6 of 16) sys-apps/attr-2.4.47-r2::gentoo
>>> Emerging (7 of 16) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (7 of 16) sys-libs/gdbm-1.13-r2::gentoo
>>> Emerging (8 of 16) dev-libs/openssl-1.0.2n::gentoo
>>> Installing (8 of 16) dev-libs/openssl-1.0.2n::gentoo
>>> Emerging (9 of 16) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Installing (9 of 16) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Emerging (10 of 16) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (10 of 16) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (11 of 16) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (11 of 16) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (12 of 16) dev-python/pyblake2-1.1.0::gentoo
>>> Installing (12 of 16) dev-python/pyblake2-1.1.0::gentoo
>>> Emerging (13 of 16) dev-python/setuptools-36.7.2::gentoo
>>> Installing (13 of 16) dev-python/setuptools-36.7.2::gentoo
>>> Emerging (14 of 16) dev-python/certifi-2017.4.17::gentoo
>>> Installing (14 of 16) dev-python/certifi-2017.4.17::gentoo
>>> Emerging (15 of 16) dev-python/pyxattr-0.5.5::gentoo
>>> Installing (15 of 16) dev-python/pyxattr-0.5.5::gentoo
>>> Emerging (16 of 16) sys-apps/portage-2.3.19-r1::gentoo
>>> Installing (16 of 16) sys-apps/portage-2.3.19-r1::gentoo
* Messages for package app-misc/ca-certificates-20161130.3.30.2:
* You should run update-ca-certificates manually after etc-update
* To prevent applications relying on system's trusted root certificate store
* from using CAs where at least one major browser vendor Gentoo is following
* has decided to apply trust level restrictions, the following
* certificate(s) were removed:
* mozilla/CA_WoSign_ECC_Root.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign_China.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/Certification_Authority_of_WoSign_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* Messages for package dev-python/pyblake2-1.1.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/setuptools-36.7.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/certifi-2017.4.17:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyxattr-0.5.5:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-apps/portage-2.3.19-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
emerge --quiet --usepkg --buildpkg --newuse -e @system
[nomerge ] net-misc/wget-1.19.1-r2::gentoo USE="ipv6* nls* pcre* ssl* zlib* -debug -gnutls -idn (-libressl) -ntlm -static {-test} -uuid"
[nomerge ] dev-libs/libpcre-8.41-r1:3::gentoo USE="bzip2 cxx readline recursion-limit (unicode) zlib (-jit) -libedit -pcre16 -pcre32 -static-libs"
[nomerge ] virtual/pkgconfig-0-r1::gentoo
[nomerge ] dev-util/pkgconfig-0.29.2::gentoo USE="-hardened -internal-glib*"
[nomerge ] dev-libs/glib-2.50.3-r1:2::gentoo USE="mime xattr -dbus -debug (-fam) (-selinux) -static-libs -systemtap {-test} -utils" PYTHON_TARGETS="python2_7"
[ebuild N ] x11-misc/shared-mime-info-1.9::gentoo USE="{-test}" 0 KiB
[ebuild R ] dev-util/pkgconfig-0.29.2::gentoo USE="-hardened -internal-glib*" 0 KiB
[ebuild N ] dev-libs/glib-2.50.3-r1:2::gentoo USE="mime xattr -dbus -debug (-fam) (-selinux) -static-libs -systemtap {-test} -utils" PYTHON_TARGETS="python2_7" 0 KiB
[ebuild N ] virtual/service-manager-0::gentoo USE="(-prefix)" 0 KiB
[nomerge ] sys-apps/openrc-0.34.11::gentoo USE="ncurses netifrc pam unicode -audit -debug -newnet (-prefix) (-selinux) -static-libs"
[ebuild N ] net-misc/netifrc-0.5.1::gentoo 0 KiB
[ebuild N ] sys-apps/openrc-0.34.11::gentoo USE="ncurses netifrc pam unicode -audit -debug -newnet (-prefix) (-selinux) -static-libs" 0 KiB
[ebuild N ] sys-apps/man-pages-4.13::gentoo USE="nls" L10N="-da -de -fr -it -ja -nl -pl -ru -zh-CN" 0 KiB
[ebuild N ] sys-apps/man-pages-posix-2013a::gentoo 0 KiB
[ebuild N ] virtual/man-0-r1::gentoo 0 KiB
[ebuild N ] sys-apps/man-db-2.7.6.1-r2::gentoo USE="berkdb gdbm manpager nls zlib (-selinux) -static-libs" 0 KiB
[ebuild N ] app-text/po4a-0.47-r1::gentoo USE="{-test}" 0 KiB
[ebuild N ] app-text/docbook-xml-dtd-4.1.2-r6:4.1.2::gentoo 0 KiB
[ebuild N ] app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo USE="-ruby" 0 KiB
[ebuild N ] app-text/build-docbook-catalog-1.19.1::gentoo 0 KiB
[ebuild N ] sys-fs/e2fsprogs-1.43.6::gentoo USE="nls -fuse -static-libs" 0 KiB
[ebuild N ] virtual/ssh-0::gentoo USE="-minimal" 0 KiB
[nomerge ] virtual/shadow-0::gentoo
[ebuild R ] sys-apps/shadow-4.5::gentoo USE="acl* cracklib* nls* pam* xattr* -audit (-selinux) -skey" 0 KiB
[nomerge ] virtual/ssh-0::gentoo USE="-minimal"
[ebuild N ] net-misc/openssh-7.5_p1-r4::gentoo USE="bindist hpn pam pie ssl -X -X509 -audit -debug -kerberos -ldap -ldns -libedit (-libressl) -livecd (-sctp) (-selinux) -skey -ssh1 -static {-test}" 0 KiB
[ebuild N ] sys-apps/util-linux-2.30.2::gentoo USE="cramfs ncurses nls pam readline suid unicode -build -caps -fdformat -kill -python (-selinux) -slang -static-libs -systemd {-test} -tty-helpers -udev" PYTHON_SINGLE_TARGET="python3_5 -python2_7 -python3_4 -python3_6" PYTHON_TARGETS="python2_7 python3_5 -python3_4 -python3_6" 0 KiB
[ebuild N ] sys-libs/pam-1.2.1-r2::gentoo USE="berkdb cracklib filecaps nls pie -audit -debug -nis (-selinux) {-test}" 0 KiB
[ebuild N ] sys-auth/pambase-20150213-r1::gentoo USE="cracklib nullok sha512 -consolekit -debug (-elogind) -gnome-keyring -minimal -mktemp -pam_krb5 -pam_ssh -passwdqc -securetty (-selinux) -systemd" 0 KiB
[ebuild N ] net-misc/iputils-20171016_pre::gentoo USE="arping filecaps ipv6 openssl ssl -SECURITY_HAZARD -caps -clockdiff -doc -gcrypt -idn (-libressl) -nettle -rarpd -rdisc -static -tftpd -tracepath -traceroute" 0 KiB
[ebuild N ] sys-libs/libcap-2.24-r2::gentoo USE="pam -static-libs" 0 KiB
[ebuild N ] sys-apps/kbd-2.0.4::gentoo USE="nls pam {-test}" 0 KiB
[ebuild N ] virtual/pam-0-r1::gentoo 0 KiB
Total: 25 packages (23 new, 2 reinstalls), Size of downloads: 0 KiB
* Error: circular dependencies:
(sys-libs/pam-1.2.1-r2:0/0::gentoo, ebuild scheduled for merge) depends on
(sys-libs/libcap-2.24-r2:0/0::gentoo, ebuild scheduled for merge) (buildtime)
(virtual/pam-0-r1:0/0::gentoo, ebuild scheduled for merge) (buildtime)
(sys-libs/pam-1.2.1-r2:0/0::gentoo, ebuild scheduled for merge) (runtime)
It might be possible to break this cycle
by applying any of the following changes:
- sys-libs/pam-1.2.1-r2 (Change USE: -filecaps)
- sys-libs/libcap-2.24-r2 (Change USE: -pam)
Note that this change can be reverted, once the package has been installed.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage3-ia64-20180128T031003Z/.catalyst_lock'
Command exited with non-zero status 1
1890.32user 186.78system 26:27.35elapsed 130%CPU (0avgtext+0avgdata 207552maxresident)k
0inputs+0outputs (0major+33983417minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180128T031003Z.WUqxPa/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2018-01-29 12:57 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2018-01-29 12:57 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Building natively for ia64
Source path set to /home/catalyst/tmp/default/stage2-ia64-20180129T031003Z/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /home/catalyst/builds/default/stage2-ia64-20180129T031003Z.tar.bz2
Caching snapshot to /home/catalyst/snapshot_cache/20180129T031003Z/
The autoresume path is /home/catalyst/tmp/default/.autoresume-stage3-ia64-20180129T031003Z/
Location of the package cache is /home/catalyst/packages/default/stage3-ia64-20180129T031003Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /home/catalyst/tmp/default/.autoresume-stage3-ia64-20180129T031003Z/
--- Running action sequence: unpack
Starting rsync from /home/catalyst/tmp/default/stage2-ia64-20180129T031003Z/
to /home/catalyst/tmp/default/stage3-ia64-20180129T031003Z/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /home/catalyst/tmp/default/stage3-ia64-20180129T031003Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/stage3-ia64-20180129T031003Z//tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot /home/catalyst/tmp/default/stage3-ia64-20180129T031003Z/
>>> Regenerating /etc/ld.so.cache...
Updating portage with USE=""
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 16) app-misc/mime-types-9::gentoo
>>> Installing (1 of 16) app-misc/mime-types-9::gentoo
>>> Emerging (2 of 16) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (2 of 16) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging (3 of 16) sys-apps/install-xattr-0.5::gentoo
>>> Installing (3 of 16) sys-apps/install-xattr-0.5::gentoo
>>> Emerging (4 of 16) sys-apps/debianutils-4.8.3::gentoo
>>> Installing (4 of 16) sys-apps/debianutils-4.8.3::gentoo
>>> Emerging (5 of 16) app-arch/unzip-6.0_p21-r2::gentoo
>>> Installing (5 of 16) app-arch/unzip-6.0_p21-r2::gentoo
>>> Emerging (6 of 16) sys-apps/attr-2.4.47-r2::gentoo
>>> Installing (6 of 16) sys-apps/attr-2.4.47-r2::gentoo
>>> Emerging (7 of 16) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (7 of 16) sys-libs/gdbm-1.13-r2::gentoo
>>> Emerging (8 of 16) dev-libs/openssl-1.0.2n::gentoo
>>> Installing (8 of 16) dev-libs/openssl-1.0.2n::gentoo
>>> Emerging (9 of 16) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Installing (9 of 16) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Emerging (10 of 16) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (10 of 16) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (11 of 16) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (11 of 16) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (12 of 16) dev-python/pyblake2-1.1.0::gentoo
>>> Installing (12 of 16) dev-python/pyblake2-1.1.0::gentoo
>>> Emerging (13 of 16) dev-python/setuptools-36.7.2::gentoo
>>> Installing (13 of 16) dev-python/setuptools-36.7.2::gentoo
>>> Emerging (14 of 16) dev-python/certifi-2017.4.17::gentoo
>>> Installing (14 of 16) dev-python/certifi-2017.4.17::gentoo
>>> Emerging (15 of 16) dev-python/pyxattr-0.5.5::gentoo
>>> Installing (15 of 16) dev-python/pyxattr-0.5.5::gentoo
>>> Emerging (16 of 16) sys-apps/portage-2.3.19-r1::gentoo
>>> Installing (16 of 16) sys-apps/portage-2.3.19-r1::gentoo
* Messages for package app-misc/ca-certificates-20161130.3.30.2:
* You should run update-ca-certificates manually after etc-update
* To prevent applications relying on system's trusted root certificate store
* from using CAs where at least one major browser vendor Gentoo is following
* has decided to apply trust level restrictions, the following
* certificate(s) were removed:
* mozilla/CA_WoSign_ECC_Root.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign_China.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/Certification_Authority_of_WoSign_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* Messages for package dev-python/pyblake2-1.1.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/setuptools-36.7.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/certifi-2017.4.17:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyxattr-0.5.5:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-apps/portage-2.3.19-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
emerge --quiet --usepkg --buildpkg --newuse -e @system
[nomerge ] sys-apps/kbd-2.0.4::gentoo USE="nls pam {-test}"
[nomerge ] virtual/pkgconfig-0-r1::gentoo
[nomerge ] dev-util/pkgconfig-0.29.2::gentoo USE="-hardened -internal-glib*"
[nomerge ] dev-libs/glib-2.50.3-r1:2::gentoo USE="mime xattr -dbus -debug (-fam) (-selinux) -static-libs -systemtap {-test} -utils" PYTHON_TARGETS="python2_7"
[ebuild N ] x11-misc/shared-mime-info-1.9::gentoo USE="{-test}" 0 KiB
[ebuild R ] dev-util/pkgconfig-0.29.2::gentoo USE="-hardened -internal-glib*" 0 KiB
[ebuild N ] dev-libs/glib-2.50.3-r1:2::gentoo USE="mime xattr -dbus -debug (-fam) (-selinux) -static-libs -systemtap {-test} -utils" PYTHON_TARGETS="python2_7" 0 KiB
[ebuild N ] virtual/service-manager-0::gentoo USE="(-prefix)" 0 KiB
[nomerge ] sys-apps/openrc-0.34.11::gentoo USE="ncurses netifrc pam unicode -audit -debug -newnet (-prefix) (-selinux) -static-libs"
[ebuild N ] net-misc/netifrc-0.5.1::gentoo 0 KiB
[ebuild N ] sys-apps/openrc-0.34.11::gentoo USE="ncurses netifrc pam unicode -audit -debug -newnet (-prefix) (-selinux) -static-libs" 0 KiB
[ebuild N ] sys-apps/man-pages-4.13::gentoo USE="nls" L10N="-da -de -fr -it -ja -nl -pl -ru -zh-CN" 0 KiB
[ebuild N ] sys-apps/man-pages-posix-2013a::gentoo 0 KiB
[ebuild N ] virtual/man-0-r1::gentoo 0 KiB
[ebuild N ] sys-apps/man-db-2.7.6.1-r2::gentoo USE="berkdb gdbm manpager nls zlib (-selinux) -static-libs" 0 KiB
[ebuild N ] app-text/po4a-0.47-r1::gentoo USE="{-test}" 0 KiB
[ebuild N ] app-text/docbook-xml-dtd-4.1.2-r6:4.1.2::gentoo 0 KiB
[ebuild N ] app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo USE="-ruby" 0 KiB
[ebuild N ] app-text/build-docbook-catalog-1.19.1::gentoo 0 KiB
[ebuild N ] sys-fs/e2fsprogs-1.43.6::gentoo USE="nls -fuse -static-libs" 0 KiB
[ebuild N ] virtual/ssh-0::gentoo USE="-minimal" 0 KiB
[nomerge ] virtual/shadow-0::gentoo
[ebuild R ] sys-apps/shadow-4.5::gentoo USE="acl* cracklib* nls* pam* xattr* -audit (-selinux) -skey" 0 KiB
[nomerge ] virtual/ssh-0::gentoo USE="-minimal"
[ebuild N ] net-misc/openssh-7.5_p1-r4::gentoo USE="bindist hpn pam pie ssl -X -X509 -audit -debug -kerberos -ldap -ldns -libedit (-libressl) -livecd (-sctp) (-selinux) -skey -ssh1 -static {-test}" 0 KiB
[ebuild N ] sys-apps/util-linux-2.30.2::gentoo USE="cramfs ncurses nls pam readline suid unicode -build -caps -fdformat -kill -python (-selinux) -slang -static-libs -systemd {-test} -tty-helpers -udev" PYTHON_SINGLE_TARGET="python3_5 -python2_7 -python3_4 -python3_6" PYTHON_TARGETS="python2_7 python3_5 -python3_4 -python3_6" 0 KiB
[ebuild N ] sys-libs/pam-1.2.1-r2::gentoo USE="berkdb cracklib filecaps nls pie -audit -debug -nis (-selinux) {-test}" 0 KiB
[ebuild N ] sys-auth/pambase-20150213-r1::gentoo USE="cracklib nullok sha512 -consolekit -debug (-elogind) -gnome-keyring -minimal -mktemp -pam_krb5 -pam_ssh -passwdqc -securetty (-selinux) -systemd" 0 KiB
[ebuild N ] net-misc/iputils-20171016_pre::gentoo USE="arping filecaps ipv6 openssl ssl -SECURITY_HAZARD -caps -clockdiff -doc -gcrypt -idn (-libressl) -nettle -rarpd -rdisc -static -tftpd -tracepath -traceroute" 0 KiB
[ebuild N ] sys-libs/libcap-2.24-r2::gentoo USE="pam -static-libs" 0 KiB
[ebuild N ] sys-apps/kbd-2.0.4::gentoo USE="nls pam {-test}" 0 KiB
[ebuild N ] virtual/pam-0-r1::gentoo 0 KiB
Total: 25 packages (23 new, 2 reinstalls), Size of downloads: 0 KiB
* Error: circular dependencies:
(sys-libs/pam-1.2.1-r2:0/0::gentoo, ebuild scheduled for merge) depends on
(sys-libs/libcap-2.24-r2:0/0::gentoo, ebuild scheduled for merge) (buildtime)
(virtual/pam-0-r1:0/0::gentoo, ebuild scheduled for merge) (buildtime)
(sys-libs/pam-1.2.1-r2:0/0::gentoo, ebuild scheduled for merge) (runtime)
It might be possible to break this cycle
by applying the following change:
- sys-libs/pam-1.2.1-r2 (Change USE: -filecaps)
Note that this change can be reverted, once the package has been installed.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage3-ia64-20180129T031003Z/.catalyst_lock'
Command exited with non-zero status 1
1892.03user 185.35system 25:47.63elapsed 134%CPU (0avgtext+0avgdata 207552maxresident)k
0inputs+0outputs (0major+33985931minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180129T031003Z.l5uenV/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2018-01-30 7:21 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2018-01-30 7:21 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Envscript support enabled.
Using target: stage3
Building natively for ia64
Source path set to /home/catalyst/tmp/default/stage2-ia64-20180129T213008Z/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /home/catalyst/builds/default/stage2-ia64-20180129T213008Z.tar.bz2
Caching snapshot to /home/catalyst/snapshot_cache/20180129T213008Z/
The autoresume path is /home/catalyst/tmp/default/.autoresume-stage3-ia64-20180129T213008Z/
Location of the package cache is /home/catalyst/packages/default/stage3-ia64-20180129T213008Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /home/catalyst/tmp/default/.autoresume-stage3-ia64-20180129T213008Z/
--- Running action sequence: unpack
Starting rsync from /home/catalyst/tmp/default/stage2-ia64-20180129T213008Z/
to /home/catalyst/tmp/default/stage3-ia64-20180129T213008Z/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /home/catalyst/tmp/default/stage3-ia64-20180129T213008Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/stage3-ia64-20180129T213008Z//tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot /home/catalyst/tmp/default/stage3-ia64-20180129T213008Z/
>>> Regenerating /etc/ld.so.cache...
Updating portage with USE=""
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 16) app-misc/mime-types-9::gentoo
>>> Installing (1 of 16) app-misc/mime-types-9::gentoo
>>> Emerging (2 of 16) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (2 of 16) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging (3 of 16) sys-apps/install-xattr-0.5::gentoo
>>> Installing (3 of 16) sys-apps/install-xattr-0.5::gentoo
>>> Emerging (4 of 16) sys-apps/debianutils-4.8.3::gentoo
>>> Installing (4 of 16) sys-apps/debianutils-4.8.3::gentoo
>>> Emerging (5 of 16) app-arch/unzip-6.0_p21-r2::gentoo
>>> Installing (5 of 16) app-arch/unzip-6.0_p21-r2::gentoo
>>> Emerging (6 of 16) sys-apps/attr-2.4.47-r2::gentoo
>>> Installing (6 of 16) sys-apps/attr-2.4.47-r2::gentoo
>>> Emerging (7 of 16) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (7 of 16) sys-libs/gdbm-1.13-r2::gentoo
>>> Emerging (8 of 16) dev-libs/openssl-1.0.2n::gentoo
>>> Installing (8 of 16) dev-libs/openssl-1.0.2n::gentoo
>>> Emerging (9 of 16) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Installing (9 of 16) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Emerging (10 of 16) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (10 of 16) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (11 of 16) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (11 of 16) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (12 of 16) dev-python/pyblake2-1.1.0::gentoo
>>> Installing (12 of 16) dev-python/pyblake2-1.1.0::gentoo
>>> Emerging (13 of 16) dev-python/setuptools-36.7.2::gentoo
>>> Installing (13 of 16) dev-python/setuptools-36.7.2::gentoo
>>> Emerging (14 of 16) dev-python/certifi-2017.4.17::gentoo
>>> Installing (14 of 16) dev-python/certifi-2017.4.17::gentoo
>>> Emerging (15 of 16) dev-python/pyxattr-0.5.5::gentoo
>>> Installing (15 of 16) dev-python/pyxattr-0.5.5::gentoo
>>> Emerging (16 of 16) sys-apps/portage-2.3.19-r1::gentoo
>>> Installing (16 of 16) sys-apps/portage-2.3.19-r1::gentoo
* Messages for package app-misc/ca-certificates-20161130.3.30.2:
* You should run update-ca-certificates manually after etc-update
* To prevent applications relying on system's trusted root certificate store
* from using CAs where at least one major browser vendor Gentoo is following
* has decided to apply trust level restrictions, the following
* certificate(s) were removed:
* mozilla/CA_WoSign_ECC_Root.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign_China.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/Certification_Authority_of_WoSign_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* Messages for package dev-python/pyblake2-1.1.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/setuptools-36.7.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/certifi-2017.4.17:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyxattr-0.5.5:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-apps/portage-2.3.19-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
emerge --quiet --usepkg --buildpkg --newuse -e @system
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-fs/static-dev-0.1
* We have detected that you currently use udev or devfs or devtmpfs
* and this ebuild cannot install to the same mount-point.
* ERROR: sys-fs/static-dev-0.1::gentoo failed (pretend phase):
* Cannot install on udev/devfs tmpfs.
*
* Call stack:
* ebuild.sh, line 124: Called pkg_pretend
* static-dev-0.1.ebuild, line 38: Called abort
* static-dev-0.1.ebuild, line 22: Called die
* The specific snippet of code:
* die "Cannot install on udev/devfs tmpfs."
*
* If you need support, post the output of `emerge --info '=sys-fs/static-dev-0.1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/static-dev-0.1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/die.env'.
* Working directory: '/var/tmp/portage/sys-fs/static-dev-0.1/homedir'
* S: '/var/tmp/portage/sys-fs/static-dev-0.1/work/static-dev-0.1'
>>> Running pre-merge checks for sys-libs/glibc-2.25-r9
>>> Running pre-merge checks for sys-devel/gcc-6.4.0-r1
>>> Running pre-merge checks for sys-libs/pam-1.2.1-r2
>>> Running pre-merge checks for net-misc/openssh-7.5_p1-r4
* Messages for package sys-fs/static-dev-0.1:
* We have detected that you currently use udev or devfs or devtmpfs
* and this ebuild cannot install to the same mount-point.
* ERROR: sys-fs/static-dev-0.1::gentoo failed (pretend phase):
* Cannot install on udev/devfs tmpfs.
*
* Call stack:
* ebuild.sh, line 124: Called pkg_pretend
* static-dev-0.1.ebuild, line 38: Called abort
* static-dev-0.1.ebuild, line 22: Called die
* The specific snippet of code:
* die "Cannot install on udev/devfs tmpfs."
*
* If you need support, post the output of `emerge --info '=sys-fs/static-dev-0.1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/static-dev-0.1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/die.env'.
* Working directory: '/var/tmp/portage/sys-fs/static-dev-0.1/homedir'
* S: '/var/tmp/portage/sys-fs/static-dev-0.1/work/static-dev-0.1'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage3-ia64-20180129T213008Z/.catalyst_lock'
Command exited with non-zero status 1
1900.72user 189.94system 26:48.61elapsed 129%CPU (0avgtext+0avgdata 207552maxresident)k
0inputs+0outputs (8major+34272159minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180129T213008Z.fj5VQq/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2018-02-12 9:22 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2018-02-12 9:22 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Envscript support enabled.
Using target: stage3
Building natively for ia64
Source path set to /home/catalyst/tmp/default/stage2-ia64-20180212T031002Z/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /home/catalyst/builds/default/stage2-ia64-20180212T031002Z.tar.bz2
Caching snapshot to /home/catalyst/snapshot_cache/20180212T031002Z/
The autoresume path is /home/catalyst/tmp/default/.autoresume-stage3-ia64-20180212T031002Z/
Location of the package cache is /home/catalyst/packages/default/stage3-ia64-20180212T031002Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /home/catalyst/tmp/default/.autoresume-stage3-ia64-20180212T031002Z/
--- Running action sequence: unpack
Starting rsync from /home/catalyst/tmp/default/stage2-ia64-20180212T031002Z/
to /home/catalyst/tmp/default/stage3-ia64-20180212T031002Z/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /home/catalyst/tmp/default/stage3-ia64-20180212T031002Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/stage3-ia64-20180212T031002Z//tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot /home/catalyst/tmp/default/stage3-ia64-20180212T031002Z/
>>> Regenerating /etc/ld.so.cache...
Updating portage with USE=""
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 16) app-misc/mime-types-9::gentoo
>>> Installing (1 of 16) app-misc/mime-types-9::gentoo
>>> Emerging (2 of 16) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (2 of 16) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging (3 of 16) sys-apps/install-xattr-0.5::gentoo
>>> Installing (3 of 16) sys-apps/install-xattr-0.5::gentoo
>>> Emerging (4 of 16) sys-apps/debianutils-4.8.3::gentoo
>>> Installing (4 of 16) sys-apps/debianutils-4.8.3::gentoo
>>> Emerging (5 of 16) app-arch/unzip-6.0_p21-r2::gentoo
>>> Installing (5 of 16) app-arch/unzip-6.0_p21-r2::gentoo
>>> Emerging (6 of 16) sys-apps/attr-2.4.47-r2::gentoo
>>> Installing (6 of 16) sys-apps/attr-2.4.47-r2::gentoo
>>> Emerging (7 of 16) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (7 of 16) sys-libs/gdbm-1.13-r2::gentoo
>>> Emerging (8 of 16) dev-libs/openssl-1.0.2n::gentoo
>>> Installing (8 of 16) dev-libs/openssl-1.0.2n::gentoo
>>> Emerging (9 of 16) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Installing (9 of 16) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Emerging (10 of 16) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (10 of 16) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (11 of 16) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (11 of 16) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (12 of 16) dev-python/pyblake2-1.1.0::gentoo
>>> Installing (12 of 16) dev-python/pyblake2-1.1.0::gentoo
>>> Emerging (13 of 16) dev-python/setuptools-36.7.2::gentoo
>>> Installing (13 of 16) dev-python/setuptools-36.7.2::gentoo
>>> Emerging (14 of 16) dev-python/certifi-2017.4.17::gentoo
>>> Installing (14 of 16) dev-python/certifi-2017.4.17::gentoo
>>> Emerging (15 of 16) dev-python/pyxattr-0.5.5::gentoo
>>> Installing (15 of 16) dev-python/pyxattr-0.5.5::gentoo
>>> Emerging (16 of 16) sys-apps/portage-2.3.19-r1::gentoo
>>> Installing (16 of 16) sys-apps/portage-2.3.19-r1::gentoo
* Messages for package app-misc/ca-certificates-20161130.3.30.2:
* You should run update-ca-certificates manually after etc-update
* To prevent applications relying on system's trusted root certificate store
* from using CAs where at least one major browser vendor Gentoo is following
* has decided to apply trust level restrictions, the following
* certificate(s) were removed:
* mozilla/CA_WoSign_ECC_Root.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign_China.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/Certification_Authority_of_WoSign_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* Messages for package dev-python/pyblake2-1.1.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/setuptools-36.7.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/certifi-2017.4.17:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyxattr-0.5.5:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-apps/portage-2.3.19-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
emerge --quiet --usepkg --buildpkg --newuse -e @system
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-fs/static-dev-0.1
* We have detected that you currently use udev or devfs or devtmpfs
* and this ebuild cannot install to the same mount-point.
* ERROR: sys-fs/static-dev-0.1::gentoo failed (pretend phase):
* Cannot install on udev/devfs tmpfs.
*
* Call stack:
* ebuild.sh, line 124: Called pkg_pretend
* static-dev-0.1.ebuild, line 38: Called abort
* static-dev-0.1.ebuild, line 22: Called die
* The specific snippet of code:
* die "Cannot install on udev/devfs tmpfs."
*
* If you need support, post the output of `emerge --info '=sys-fs/static-dev-0.1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/static-dev-0.1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/die.env'.
* Working directory: '/var/tmp/portage/sys-fs/static-dev-0.1/homedir'
* S: '/var/tmp/portage/sys-fs/static-dev-0.1/work/static-dev-0.1'
>>> Running pre-merge checks for sys-libs/glibc-2.25-r10
>>> Running pre-merge checks for sys-devel/gcc-6.4.0-r1
>>> Running pre-merge checks for sys-libs/pam-1.2.1-r2
>>> Running pre-merge checks for net-misc/openssh-7.5_p1-r4
* Messages for package sys-fs/static-dev-0.1:
* We have detected that you currently use udev or devfs or devtmpfs
* and this ebuild cannot install to the same mount-point.
* ERROR: sys-fs/static-dev-0.1::gentoo failed (pretend phase):
* Cannot install on udev/devfs tmpfs.
*
* Call stack:
* ebuild.sh, line 124: Called pkg_pretend
* static-dev-0.1.ebuild, line 38: Called abort
* static-dev-0.1.ebuild, line 22: Called die
* The specific snippet of code:
* die "Cannot install on udev/devfs tmpfs."
*
* If you need support, post the output of `emerge --info '=sys-fs/static-dev-0.1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/static-dev-0.1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/die.env'.
* Working directory: '/var/tmp/portage/sys-fs/static-dev-0.1/homedir'
* S: '/var/tmp/portage/sys-fs/static-dev-0.1/work/static-dev-0.1'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage3-ia64-20180212T031002Z/.catalyst_lock'
Command exited with non-zero status 1
1901.93user 184.82system 25:46.98elapsed 134%CPU (0avgtext+0avgdata 207552maxresident)k
0inputs+0outputs (0major+34213689minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180212T031002Z.bnJOAQ/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2018-02-13 9:36 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2018-02-13 9:36 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Envscript support enabled.
Using target: stage3
Building natively for ia64
Source path set to /home/catalyst/tmp/default/stage2-ia64-20180213T031004Z/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /home/catalyst/builds/default/stage2-ia64-20180213T031004Z.tar.bz2
Caching snapshot to /home/catalyst/snapshot_cache/20180213T031004Z/
The autoresume path is /home/catalyst/tmp/default/.autoresume-stage3-ia64-20180213T031004Z/
Location of the package cache is /home/catalyst/packages/default/stage3-ia64-20180213T031004Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /home/catalyst/tmp/default/.autoresume-stage3-ia64-20180213T031004Z/
--- Running action sequence: unpack
Starting rsync from /home/catalyst/tmp/default/stage2-ia64-20180213T031004Z/
to /home/catalyst/tmp/default/stage3-ia64-20180213T031004Z/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /home/catalyst/tmp/default/stage3-ia64-20180213T031004Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/stage3-ia64-20180213T031004Z//tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot /home/catalyst/tmp/default/stage3-ia64-20180213T031004Z/
>>> Regenerating /etc/ld.so.cache...
Updating portage with USE=""
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 16) app-misc/mime-types-9::gentoo
>>> Installing (1 of 16) app-misc/mime-types-9::gentoo
>>> Emerging (2 of 16) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (2 of 16) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging (3 of 16) sys-apps/install-xattr-0.5::gentoo
>>> Installing (3 of 16) sys-apps/install-xattr-0.5::gentoo
>>> Emerging (4 of 16) sys-apps/debianutils-4.8.3::gentoo
>>> Installing (4 of 16) sys-apps/debianutils-4.8.3::gentoo
>>> Emerging (5 of 16) app-arch/unzip-6.0_p21-r2::gentoo
>>> Installing (5 of 16) app-arch/unzip-6.0_p21-r2::gentoo
>>> Emerging (6 of 16) sys-apps/attr-2.4.47-r2::gentoo
>>> Installing (6 of 16) sys-apps/attr-2.4.47-r2::gentoo
>>> Emerging (7 of 16) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (7 of 16) sys-libs/gdbm-1.13-r2::gentoo
>>> Emerging (8 of 16) dev-libs/openssl-1.0.2n::gentoo
>>> Installing (8 of 16) dev-libs/openssl-1.0.2n::gentoo
>>> Emerging (9 of 16) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Installing (9 of 16) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Emerging (10 of 16) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (10 of 16) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (11 of 16) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (11 of 16) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (12 of 16) dev-python/pyblake2-1.1.0::gentoo
>>> Installing (12 of 16) dev-python/pyblake2-1.1.0::gentoo
>>> Emerging (13 of 16) dev-python/setuptools-36.7.2::gentoo
>>> Installing (13 of 16) dev-python/setuptools-36.7.2::gentoo
>>> Emerging (14 of 16) dev-python/certifi-2017.4.17::gentoo
>>> Installing (14 of 16) dev-python/certifi-2017.4.17::gentoo
>>> Emerging (15 of 16) dev-python/pyxattr-0.5.5::gentoo
>>> Installing (15 of 16) dev-python/pyxattr-0.5.5::gentoo
>>> Emerging (16 of 16) sys-apps/portage-2.3.19-r1::gentoo
>>> Installing (16 of 16) sys-apps/portage-2.3.19-r1::gentoo
* Messages for package app-misc/ca-certificates-20161130.3.30.2:
* You should run update-ca-certificates manually after etc-update
* To prevent applications relying on system's trusted root certificate store
* from using CAs where at least one major browser vendor Gentoo is following
* has decided to apply trust level restrictions, the following
* certificate(s) were removed:
* mozilla/CA_WoSign_ECC_Root.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign_China.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/Certification_Authority_of_WoSign_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* Messages for package dev-python/pyblake2-1.1.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/setuptools-36.7.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/certifi-2017.4.17:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyxattr-0.5.5:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-apps/portage-2.3.19-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
emerge --quiet --usepkg --buildpkg --newuse -e @system
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-fs/static-dev-0.1
* We have detected that you currently use udev or devfs or devtmpfs
* and this ebuild cannot install to the same mount-point.
* ERROR: sys-fs/static-dev-0.1::gentoo failed (pretend phase):
* Cannot install on udev/devfs tmpfs.
*
* Call stack:
* ebuild.sh, line 124: Called pkg_pretend
* static-dev-0.1.ebuild, line 38: Called abort
* static-dev-0.1.ebuild, line 22: Called die
* The specific snippet of code:
* die "Cannot install on udev/devfs tmpfs."
*
* If you need support, post the output of `emerge --info '=sys-fs/static-dev-0.1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/static-dev-0.1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/die.env'.
* Working directory: '/var/tmp/portage/sys-fs/static-dev-0.1/homedir'
* S: '/var/tmp/portage/sys-fs/static-dev-0.1/work/static-dev-0.1'
>>> Running pre-merge checks for sys-libs/glibc-2.25-r10
>>> Running pre-merge checks for sys-devel/gcc-6.4.0-r1
>>> Running pre-merge checks for sys-libs/pam-1.2.1-r2
>>> Running pre-merge checks for net-misc/openssh-7.5_p1-r4
* Messages for package sys-fs/static-dev-0.1:
* We have detected that you currently use udev or devfs or devtmpfs
* and this ebuild cannot install to the same mount-point.
* ERROR: sys-fs/static-dev-0.1::gentoo failed (pretend phase):
* Cannot install on udev/devfs tmpfs.
*
* Call stack:
* ebuild.sh, line 124: Called pkg_pretend
* static-dev-0.1.ebuild, line 38: Called abort
* static-dev-0.1.ebuild, line 22: Called die
* The specific snippet of code:
* die "Cannot install on udev/devfs tmpfs."
*
* If you need support, post the output of `emerge --info '=sys-fs/static-dev-0.1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/static-dev-0.1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/die.env'.
* Working directory: '/var/tmp/portage/sys-fs/static-dev-0.1/homedir'
* S: '/var/tmp/portage/sys-fs/static-dev-0.1/work/static-dev-0.1'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage3-ia64-20180213T031004Z/.catalyst_lock'
Command exited with non-zero status 1
1903.97user 184.18system 25:54.28elapsed 134%CPU (0avgtext+0avgdata 207552maxresident)k
0inputs+0outputs (0major+34209365minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180213T031004Z.9nmono/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2018-02-14 9:21 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2018-02-14 9:21 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Envscript support enabled.
Using target: stage3
Building natively for ia64
Source path set to /home/catalyst/tmp/default/stage2-ia64-20180214T031002Z/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /home/catalyst/builds/default/stage2-ia64-20180214T031002Z.tar.bz2
Caching snapshot to /home/catalyst/snapshot_cache/20180214T031002Z/
The autoresume path is /home/catalyst/tmp/default/.autoresume-stage3-ia64-20180214T031002Z/
Location of the package cache is /home/catalyst/packages/default/stage3-ia64-20180214T031002Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /home/catalyst/tmp/default/.autoresume-stage3-ia64-20180214T031002Z/
--- Running action sequence: unpack
Starting rsync from /home/catalyst/tmp/default/stage2-ia64-20180214T031002Z/
to /home/catalyst/tmp/default/stage3-ia64-20180214T031002Z/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /home/catalyst/tmp/default/stage3-ia64-20180214T031002Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/stage3-ia64-20180214T031002Z//tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot /home/catalyst/tmp/default/stage3-ia64-20180214T031002Z/
>>> Regenerating /etc/ld.so.cache...
Updating portage with USE=""
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 16) app-misc/mime-types-9::gentoo
>>> Installing (1 of 16) app-misc/mime-types-9::gentoo
>>> Emerging (2 of 16) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (2 of 16) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging (3 of 16) sys-apps/install-xattr-0.5::gentoo
>>> Installing (3 of 16) sys-apps/install-xattr-0.5::gentoo
>>> Emerging (4 of 16) sys-apps/debianutils-4.8.3::gentoo
>>> Installing (4 of 16) sys-apps/debianutils-4.8.3::gentoo
>>> Emerging (5 of 16) app-arch/unzip-6.0_p21-r2::gentoo
>>> Installing (5 of 16) app-arch/unzip-6.0_p21-r2::gentoo
>>> Emerging (6 of 16) sys-apps/attr-2.4.47-r2::gentoo
>>> Installing (6 of 16) sys-apps/attr-2.4.47-r2::gentoo
>>> Emerging (7 of 16) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (7 of 16) sys-libs/gdbm-1.13-r2::gentoo
>>> Emerging (8 of 16) dev-libs/openssl-1.0.2n::gentoo
>>> Installing (8 of 16) dev-libs/openssl-1.0.2n::gentoo
>>> Emerging (9 of 16) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Installing (9 of 16) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Emerging (10 of 16) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (10 of 16) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (11 of 16) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (11 of 16) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (12 of 16) dev-python/pyblake2-1.1.0::gentoo
>>> Installing (12 of 16) dev-python/pyblake2-1.1.0::gentoo
>>> Emerging (13 of 16) dev-python/setuptools-36.7.2::gentoo
>>> Installing (13 of 16) dev-python/setuptools-36.7.2::gentoo
>>> Emerging (14 of 16) dev-python/certifi-2017.4.17::gentoo
>>> Installing (14 of 16) dev-python/certifi-2017.4.17::gentoo
>>> Emerging (15 of 16) dev-python/pyxattr-0.5.5::gentoo
>>> Installing (15 of 16) dev-python/pyxattr-0.5.5::gentoo
>>> Emerging (16 of 16) sys-apps/portage-2.3.19-r1::gentoo
>>> Installing (16 of 16) sys-apps/portage-2.3.19-r1::gentoo
* Messages for package app-misc/ca-certificates-20161130.3.30.2:
* You should run update-ca-certificates manually after etc-update
* To prevent applications relying on system's trusted root certificate store
* from using CAs where at least one major browser vendor Gentoo is following
* has decided to apply trust level restrictions, the following
* certificate(s) were removed:
* mozilla/CA_WoSign_ECC_Root.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign_China.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/Certification_Authority_of_WoSign_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* Messages for package dev-python/pyblake2-1.1.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/setuptools-36.7.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/certifi-2017.4.17:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyxattr-0.5.5:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-apps/portage-2.3.19-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
emerge --quiet --usepkg --buildpkg --newuse -e @system
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-fs/static-dev-0.1
* We have detected that you currently use udev or devfs or devtmpfs
* and this ebuild cannot install to the same mount-point.
* ERROR: sys-fs/static-dev-0.1::gentoo failed (pretend phase):
* Cannot install on udev/devfs tmpfs.
*
* Call stack:
* ebuild.sh, line 124: Called pkg_pretend
* static-dev-0.1.ebuild, line 38: Called abort
* static-dev-0.1.ebuild, line 22: Called die
* The specific snippet of code:
* die "Cannot install on udev/devfs tmpfs."
*
* If you need support, post the output of `emerge --info '=sys-fs/static-dev-0.1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/static-dev-0.1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/die.env'.
* Working directory: '/var/tmp/portage/sys-fs/static-dev-0.1/homedir'
* S: '/var/tmp/portage/sys-fs/static-dev-0.1/work/static-dev-0.1'
>>> Running pre-merge checks for sys-libs/glibc-2.25-r10
>>> Running pre-merge checks for sys-devel/gcc-6.4.0-r1
>>> Running pre-merge checks for sys-libs/pam-1.2.1-r2
>>> Running pre-merge checks for net-misc/openssh-7.5_p1-r4
* Messages for package sys-fs/static-dev-0.1:
* We have detected that you currently use udev or devfs or devtmpfs
* and this ebuild cannot install to the same mount-point.
* ERROR: sys-fs/static-dev-0.1::gentoo failed (pretend phase):
* Cannot install on udev/devfs tmpfs.
*
* Call stack:
* ebuild.sh, line 124: Called pkg_pretend
* static-dev-0.1.ebuild, line 38: Called abort
* static-dev-0.1.ebuild, line 22: Called die
* The specific snippet of code:
* die "Cannot install on udev/devfs tmpfs."
*
* If you need support, post the output of `emerge --info '=sys-fs/static-dev-0.1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/static-dev-0.1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/die.env'.
* Working directory: '/var/tmp/portage/sys-fs/static-dev-0.1/homedir'
* S: '/var/tmp/portage/sys-fs/static-dev-0.1/work/static-dev-0.1'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage3-ia64-20180214T031002Z/.catalyst_lock'
Command exited with non-zero status 1
1903.03user 185.05system 25:55.65elapsed 134%CPU (0avgtext+0avgdata 207552maxresident)k
0inputs+0outputs (0major+34210655minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180214T031002Z.iZKowv/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2018-02-15 9:22 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2018-02-15 9:22 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Envscript support enabled.
Using target: stage3
Building natively for ia64
Source path set to /home/catalyst/tmp/default/stage2-ia64-20180215T031003Z/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /home/catalyst/builds/default/stage2-ia64-20180215T031003Z.tar.bz2
Caching snapshot to /home/catalyst/snapshot_cache/20180215T031003Z/
The autoresume path is /home/catalyst/tmp/default/.autoresume-stage3-ia64-20180215T031003Z/
Location of the package cache is /home/catalyst/packages/default/stage3-ia64-20180215T031003Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /home/catalyst/tmp/default/.autoresume-stage3-ia64-20180215T031003Z/
--- Running action sequence: unpack
Starting rsync from /home/catalyst/tmp/default/stage2-ia64-20180215T031003Z/
to /home/catalyst/tmp/default/stage3-ia64-20180215T031003Z/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /home/catalyst/tmp/default/stage3-ia64-20180215T031003Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/stage3-ia64-20180215T031003Z//tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot /home/catalyst/tmp/default/stage3-ia64-20180215T031003Z/
>>> Regenerating /etc/ld.so.cache...
Updating portage with USE=""
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 16) app-misc/mime-types-9::gentoo
>>> Installing (1 of 16) app-misc/mime-types-9::gentoo
>>> Emerging (2 of 16) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (2 of 16) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging (3 of 16) sys-apps/install-xattr-0.5::gentoo
>>> Installing (3 of 16) sys-apps/install-xattr-0.5::gentoo
>>> Emerging (4 of 16) sys-apps/debianutils-4.8.3::gentoo
>>> Installing (4 of 16) sys-apps/debianutils-4.8.3::gentoo
>>> Emerging (5 of 16) app-arch/unzip-6.0_p21-r2::gentoo
>>> Installing (5 of 16) app-arch/unzip-6.0_p21-r2::gentoo
>>> Emerging (6 of 16) sys-apps/attr-2.4.47-r2::gentoo
>>> Installing (6 of 16) sys-apps/attr-2.4.47-r2::gentoo
>>> Emerging (7 of 16) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (7 of 16) sys-libs/gdbm-1.13-r2::gentoo
>>> Emerging (8 of 16) dev-libs/openssl-1.0.2n::gentoo
>>> Installing (8 of 16) dev-libs/openssl-1.0.2n::gentoo
>>> Emerging (9 of 16) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Installing (9 of 16) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Emerging (10 of 16) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (10 of 16) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (11 of 16) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (11 of 16) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (12 of 16) dev-python/pyblake2-1.1.0::gentoo
>>> Installing (12 of 16) dev-python/pyblake2-1.1.0::gentoo
>>> Emerging (13 of 16) dev-python/setuptools-36.7.2::gentoo
>>> Installing (13 of 16) dev-python/setuptools-36.7.2::gentoo
>>> Emerging (14 of 16) dev-python/certifi-2017.4.17::gentoo
>>> Installing (14 of 16) dev-python/certifi-2017.4.17::gentoo
>>> Emerging (15 of 16) dev-python/pyxattr-0.5.5::gentoo
>>> Installing (15 of 16) dev-python/pyxattr-0.5.5::gentoo
>>> Emerging (16 of 16) sys-apps/portage-2.3.19-r1::gentoo
>>> Installing (16 of 16) sys-apps/portage-2.3.19-r1::gentoo
* Messages for package app-misc/ca-certificates-20161130.3.30.2:
* You should run update-ca-certificates manually after etc-update
* To prevent applications relying on system's trusted root certificate store
* from using CAs where at least one major browser vendor Gentoo is following
* has decided to apply trust level restrictions, the following
* certificate(s) were removed:
* mozilla/CA_WoSign_ECC_Root.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign_China.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/Certification_Authority_of_WoSign_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* Messages for package dev-python/pyblake2-1.1.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/setuptools-36.7.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/certifi-2017.4.17:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyxattr-0.5.5:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-apps/portage-2.3.19-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
emerge --quiet --usepkg --buildpkg --newuse -e @system
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-fs/static-dev-0.1
* We have detected that you currently use udev or devfs or devtmpfs
* and this ebuild cannot install to the same mount-point.
* ERROR: sys-fs/static-dev-0.1::gentoo failed (pretend phase):
* Cannot install on udev/devfs tmpfs.
*
* Call stack:
* ebuild.sh, line 124: Called pkg_pretend
* static-dev-0.1.ebuild, line 38: Called abort
* static-dev-0.1.ebuild, line 22: Called die
* The specific snippet of code:
* die "Cannot install on udev/devfs tmpfs."
*
* If you need support, post the output of `emerge --info '=sys-fs/static-dev-0.1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/static-dev-0.1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/die.env'.
* Working directory: '/var/tmp/portage/sys-fs/static-dev-0.1/homedir'
* S: '/var/tmp/portage/sys-fs/static-dev-0.1/work/static-dev-0.1'
>>> Running pre-merge checks for sys-libs/glibc-2.25-r10
>>> Running pre-merge checks for sys-devel/gcc-6.4.0-r1
>>> Running pre-merge checks for sys-libs/pam-1.2.1-r2
>>> Running pre-merge checks for net-misc/openssh-7.5_p1-r4
* Messages for package sys-fs/static-dev-0.1:
* We have detected that you currently use udev or devfs or devtmpfs
* and this ebuild cannot install to the same mount-point.
* ERROR: sys-fs/static-dev-0.1::gentoo failed (pretend phase):
* Cannot install on udev/devfs tmpfs.
*
* Call stack:
* ebuild.sh, line 124: Called pkg_pretend
* static-dev-0.1.ebuild, line 38: Called abort
* static-dev-0.1.ebuild, line 22: Called die
* The specific snippet of code:
* die "Cannot install on udev/devfs tmpfs."
*
* If you need support, post the output of `emerge --info '=sys-fs/static-dev-0.1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/static-dev-0.1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/die.env'.
* Working directory: '/var/tmp/portage/sys-fs/static-dev-0.1/homedir'
* S: '/var/tmp/portage/sys-fs/static-dev-0.1/work/static-dev-0.1'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage3-ia64-20180215T031003Z/.catalyst_lock'
Command exited with non-zero status 1
1904.84user 188.25system 25:59.12elapsed 134%CPU (0avgtext+0avgdata 207552maxresident)k
0inputs+0outputs (0major+34217921minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180215T031003Z.xEPV0Z/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2018-02-16 9:23 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2018-02-16 9:23 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Envscript support enabled.
Using target: stage3
Building natively for ia64
Source path set to /home/catalyst/tmp/default/stage2-ia64-20180216T031003Z/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /home/catalyst/builds/default/stage2-ia64-20180216T031003Z.tar.bz2
Caching snapshot to /home/catalyst/snapshot_cache/20180216T031003Z/
The autoresume path is /home/catalyst/tmp/default/.autoresume-stage3-ia64-20180216T031003Z/
Location of the package cache is /home/catalyst/packages/default/stage3-ia64-20180216T031003Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /home/catalyst/tmp/default/.autoresume-stage3-ia64-20180216T031003Z/
--- Running action sequence: unpack
Starting rsync from /home/catalyst/tmp/default/stage2-ia64-20180216T031003Z/
to /home/catalyst/tmp/default/stage3-ia64-20180216T031003Z/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /home/catalyst/tmp/default/stage3-ia64-20180216T031003Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/stage3-ia64-20180216T031003Z//tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot /home/catalyst/tmp/default/stage3-ia64-20180216T031003Z/
>>> Regenerating /etc/ld.so.cache...
Updating portage with USE=""
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 16) app-misc/mime-types-9::gentoo
>>> Installing (1 of 16) app-misc/mime-types-9::gentoo
>>> Emerging (2 of 16) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (2 of 16) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging (3 of 16) sys-apps/install-xattr-0.5::gentoo
>>> Installing (3 of 16) sys-apps/install-xattr-0.5::gentoo
>>> Emerging (4 of 16) sys-apps/debianutils-4.8.3::gentoo
>>> Installing (4 of 16) sys-apps/debianutils-4.8.3::gentoo
>>> Emerging (5 of 16) app-arch/unzip-6.0_p21-r2::gentoo
>>> Installing (5 of 16) app-arch/unzip-6.0_p21-r2::gentoo
>>> Emerging (6 of 16) sys-apps/attr-2.4.47-r2::gentoo
>>> Installing (6 of 16) sys-apps/attr-2.4.47-r2::gentoo
>>> Emerging (7 of 16) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (7 of 16) sys-libs/gdbm-1.13-r2::gentoo
>>> Emerging (8 of 16) dev-libs/openssl-1.0.2n::gentoo
>>> Installing (8 of 16) dev-libs/openssl-1.0.2n::gentoo
>>> Emerging (9 of 16) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Installing (9 of 16) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Emerging (10 of 16) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (10 of 16) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (11 of 16) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (11 of 16) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (12 of 16) dev-python/pyblake2-1.1.0::gentoo
>>> Installing (12 of 16) dev-python/pyblake2-1.1.0::gentoo
>>> Emerging (13 of 16) dev-python/setuptools-36.7.2::gentoo
>>> Installing (13 of 16) dev-python/setuptools-36.7.2::gentoo
>>> Emerging (14 of 16) dev-python/certifi-2017.4.17::gentoo
>>> Installing (14 of 16) dev-python/certifi-2017.4.17::gentoo
>>> Emerging (15 of 16) dev-python/pyxattr-0.5.5::gentoo
>>> Installing (15 of 16) dev-python/pyxattr-0.5.5::gentoo
>>> Emerging (16 of 16) sys-apps/portage-2.3.19-r1::gentoo
>>> Installing (16 of 16) sys-apps/portage-2.3.19-r1::gentoo
* Messages for package app-misc/ca-certificates-20161130.3.30.2:
* You should run update-ca-certificates manually after etc-update
* To prevent applications relying on system's trusted root certificate store
* from using CAs where at least one major browser vendor Gentoo is following
* has decided to apply trust level restrictions, the following
* certificate(s) were removed:
* mozilla/CA_WoSign_ECC_Root.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign_China.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/Certification_Authority_of_WoSign_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* Messages for package dev-python/pyblake2-1.1.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/setuptools-36.7.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/certifi-2017.4.17:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyxattr-0.5.5:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-apps/portage-2.3.19-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
emerge --quiet --usepkg --buildpkg --newuse -e @system
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-fs/static-dev-0.1
* We have detected that you currently use udev or devfs or devtmpfs
* and this ebuild cannot install to the same mount-point.
* ERROR: sys-fs/static-dev-0.1::gentoo failed (pretend phase):
* Cannot install on udev/devfs tmpfs.
*
* Call stack:
* ebuild.sh, line 124: Called pkg_pretend
* static-dev-0.1.ebuild, line 38: Called abort
* static-dev-0.1.ebuild, line 22: Called die
* The specific snippet of code:
* die "Cannot install on udev/devfs tmpfs."
*
* If you need support, post the output of `emerge --info '=sys-fs/static-dev-0.1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/static-dev-0.1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/die.env'.
* Working directory: '/var/tmp/portage/sys-fs/static-dev-0.1/homedir'
* S: '/var/tmp/portage/sys-fs/static-dev-0.1/work/static-dev-0.1'
>>> Running pre-merge checks for sys-libs/glibc-2.25-r10
>>> Running pre-merge checks for sys-devel/gcc-6.4.0-r1
>>> Running pre-merge checks for sys-libs/pam-1.2.1-r2
>>> Running pre-merge checks for net-misc/openssh-7.5_p1-r4
* Messages for package sys-fs/static-dev-0.1:
* We have detected that you currently use udev or devfs or devtmpfs
* and this ebuild cannot install to the same mount-point.
* ERROR: sys-fs/static-dev-0.1::gentoo failed (pretend phase):
* Cannot install on udev/devfs tmpfs.
*
* Call stack:
* ebuild.sh, line 124: Called pkg_pretend
* static-dev-0.1.ebuild, line 38: Called abort
* static-dev-0.1.ebuild, line 22: Called die
* The specific snippet of code:
* die "Cannot install on udev/devfs tmpfs."
*
* If you need support, post the output of `emerge --info '=sys-fs/static-dev-0.1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/static-dev-0.1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/die.env'.
* Working directory: '/var/tmp/portage/sys-fs/static-dev-0.1/homedir'
* S: '/var/tmp/portage/sys-fs/static-dev-0.1/work/static-dev-0.1'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage3-ia64-20180216T031003Z/.catalyst_lock'
Command exited with non-zero status 1
1907.30user 193.50system 26:11.39elapsed 133%CPU (0avgtext+0avgdata 207552maxresident)k
0inputs+0outputs (0major+34217070minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180216T031003Z.7s8icE/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2018-02-17 9:38 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2018-02-17 9:38 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Envscript support enabled.
Using target: stage3
Building natively for ia64
Source path set to /home/catalyst/tmp/default/stage2-ia64-20180217T031002Z/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /home/catalyst/builds/default/stage2-ia64-20180217T031002Z.tar.bz2
Caching snapshot to /home/catalyst/snapshot_cache/20180217T031002Z/
The autoresume path is /home/catalyst/tmp/default/.autoresume-stage3-ia64-20180217T031002Z/
Location of the package cache is /home/catalyst/packages/default/stage3-ia64-20180217T031002Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /home/catalyst/tmp/default/.autoresume-stage3-ia64-20180217T031002Z/
--- Running action sequence: unpack
Starting rsync from /home/catalyst/tmp/default/stage2-ia64-20180217T031002Z/
to /home/catalyst/tmp/default/stage3-ia64-20180217T031002Z/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /home/catalyst/tmp/default/stage3-ia64-20180217T031002Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/stage3-ia64-20180217T031002Z//tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot /home/catalyst/tmp/default/stage3-ia64-20180217T031002Z/
>>> Regenerating /etc/ld.so.cache...
Updating portage with USE=""
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 16) app-misc/mime-types-9::gentoo
>>> Installing (1 of 16) app-misc/mime-types-9::gentoo
>>> Emerging (2 of 16) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (2 of 16) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging (3 of 16) sys-apps/install-xattr-0.5::gentoo
>>> Installing (3 of 16) sys-apps/install-xattr-0.5::gentoo
>>> Emerging (4 of 16) sys-apps/debianutils-4.8.3::gentoo
>>> Installing (4 of 16) sys-apps/debianutils-4.8.3::gentoo
>>> Emerging (5 of 16) app-arch/unzip-6.0_p21-r2::gentoo
>>> Installing (5 of 16) app-arch/unzip-6.0_p21-r2::gentoo
>>> Emerging (6 of 16) sys-apps/attr-2.4.47-r2::gentoo
>>> Installing (6 of 16) sys-apps/attr-2.4.47-r2::gentoo
>>> Emerging (7 of 16) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (7 of 16) sys-libs/gdbm-1.13-r2::gentoo
>>> Emerging (8 of 16) dev-libs/openssl-1.0.2n::gentoo
>>> Installing (8 of 16) dev-libs/openssl-1.0.2n::gentoo
>>> Emerging (9 of 16) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Installing (9 of 16) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Emerging (10 of 16) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (10 of 16) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (11 of 16) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (11 of 16) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (12 of 16) dev-python/pyblake2-1.1.0::gentoo
>>> Installing (12 of 16) dev-python/pyblake2-1.1.0::gentoo
>>> Emerging (13 of 16) dev-python/setuptools-36.7.2::gentoo
>>> Installing (13 of 16) dev-python/setuptools-36.7.2::gentoo
>>> Emerging (14 of 16) dev-python/certifi-2017.4.17::gentoo
>>> Installing (14 of 16) dev-python/certifi-2017.4.17::gentoo
>>> Emerging (15 of 16) dev-python/pyxattr-0.5.5::gentoo
>>> Installing (15 of 16) dev-python/pyxattr-0.5.5::gentoo
>>> Emerging (16 of 16) sys-apps/portage-2.3.19-r1::gentoo
>>> Installing (16 of 16) sys-apps/portage-2.3.19-r1::gentoo
* Messages for package app-misc/ca-certificates-20161130.3.30.2:
* You should run update-ca-certificates manually after etc-update
* To prevent applications relying on system's trusted root certificate store
* from using CAs where at least one major browser vendor Gentoo is following
* has decided to apply trust level restrictions, the following
* certificate(s) were removed:
* mozilla/CA_WoSign_ECC_Root.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign_China.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/Certification_Authority_of_WoSign_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* Messages for package dev-python/pyblake2-1.1.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/setuptools-36.7.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/certifi-2017.4.17:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyxattr-0.5.5:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-apps/portage-2.3.19-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
emerge --quiet --usepkg --buildpkg --newuse -e @system
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-fs/static-dev-0.1
* We have detected that you currently use udev or devfs or devtmpfs
* and this ebuild cannot install to the same mount-point.
* ERROR: sys-fs/static-dev-0.1::gentoo failed (pretend phase):
* Cannot install on udev/devfs tmpfs.
*
* Call stack:
* ebuild.sh, line 124: Called pkg_pretend
* static-dev-0.1.ebuild, line 38: Called abort
* static-dev-0.1.ebuild, line 22: Called die
* The specific snippet of code:
* die "Cannot install on udev/devfs tmpfs."
*
* If you need support, post the output of `emerge --info '=sys-fs/static-dev-0.1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/static-dev-0.1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/die.env'.
* Working directory: '/var/tmp/portage/sys-fs/static-dev-0.1/homedir'
* S: '/var/tmp/portage/sys-fs/static-dev-0.1/work/static-dev-0.1'
>>> Running pre-merge checks for sys-libs/glibc-2.25-r10
>>> Running pre-merge checks for sys-devel/gcc-6.4.0-r1
>>> Running pre-merge checks for sys-libs/pam-1.2.1-r2
>>> Running pre-merge checks for net-misc/openssh-7.5_p1-r4
* Messages for package sys-fs/static-dev-0.1:
* We have detected that you currently use udev or devfs or devtmpfs
* and this ebuild cannot install to the same mount-point.
* ERROR: sys-fs/static-dev-0.1::gentoo failed (pretend phase):
* Cannot install on udev/devfs tmpfs.
*
* Call stack:
* ebuild.sh, line 124: Called pkg_pretend
* static-dev-0.1.ebuild, line 38: Called abort
* static-dev-0.1.ebuild, line 22: Called die
* The specific snippet of code:
* die "Cannot install on udev/devfs tmpfs."
*
* If you need support, post the output of `emerge --info '=sys-fs/static-dev-0.1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/static-dev-0.1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/die.env'.
* Working directory: '/var/tmp/portage/sys-fs/static-dev-0.1/homedir'
* S: '/var/tmp/portage/sys-fs/static-dev-0.1/work/static-dev-0.1'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage3-ia64-20180217T031002Z/.catalyst_lock'
Command exited with non-zero status 1
1905.41user 186.35system 25:56.51elapsed 134%CPU (0avgtext+0avgdata 207552maxresident)k
0inputs+0outputs (0major+34220172minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180217T031002Z.nVvQCI/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2018-02-18 10:50 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2018-02-18 10:50 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Envscript support enabled.
Using target: stage3
Building natively for ia64
Source path set to /home/catalyst/tmp/default/stage2-ia64-20180218T031002Z/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /home/catalyst/builds/default/stage2-ia64-20180218T031002Z.tar.bz2
Caching snapshot to /home/catalyst/snapshot_cache/20180218T031002Z/
The autoresume path is /home/catalyst/tmp/default/.autoresume-stage3-ia64-20180218T031002Z/
Location of the package cache is /home/catalyst/packages/default/stage3-ia64-20180218T031002Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /home/catalyst/tmp/default/.autoresume-stage3-ia64-20180218T031002Z/
--- Running action sequence: unpack
Starting rsync from /home/catalyst/tmp/default/stage2-ia64-20180218T031002Z/
to /home/catalyst/tmp/default/stage3-ia64-20180218T031002Z/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /home/catalyst/tmp/default/stage3-ia64-20180218T031002Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/stage3-ia64-20180218T031002Z//tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot /home/catalyst/tmp/default/stage3-ia64-20180218T031002Z/
>>> Regenerating /etc/ld.so.cache...
Updating portage with USE=""
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 16) app-misc/mime-types-9::gentoo
>>> Installing (1 of 16) app-misc/mime-types-9::gentoo
>>> Emerging (2 of 16) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (2 of 16) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging (3 of 16) sys-apps/install-xattr-0.5::gentoo
>>> Installing (3 of 16) sys-apps/install-xattr-0.5::gentoo
>>> Emerging (4 of 16) sys-apps/debianutils-4.8.3::gentoo
>>> Installing (4 of 16) sys-apps/debianutils-4.8.3::gentoo
>>> Emerging (5 of 16) app-arch/unzip-6.0_p21-r2::gentoo
>>> Installing (5 of 16) app-arch/unzip-6.0_p21-r2::gentoo
>>> Emerging (6 of 16) sys-apps/attr-2.4.47-r2::gentoo
>>> Installing (6 of 16) sys-apps/attr-2.4.47-r2::gentoo
>>> Emerging (7 of 16) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (7 of 16) sys-libs/gdbm-1.13-r2::gentoo
>>> Emerging (8 of 16) dev-libs/openssl-1.0.2n::gentoo
>>> Installing (8 of 16) dev-libs/openssl-1.0.2n::gentoo
>>> Emerging (9 of 16) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Installing (9 of 16) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Emerging (10 of 16) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (10 of 16) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (11 of 16) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (11 of 16) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (12 of 16) dev-python/pyblake2-1.1.0::gentoo
>>> Installing (12 of 16) dev-python/pyblake2-1.1.0::gentoo
>>> Emerging (13 of 16) dev-python/setuptools-36.7.2::gentoo
>>> Installing (13 of 16) dev-python/setuptools-36.7.2::gentoo
>>> Emerging (14 of 16) dev-python/certifi-2017.4.17::gentoo
>>> Installing (14 of 16) dev-python/certifi-2017.4.17::gentoo
>>> Emerging (15 of 16) dev-python/pyxattr-0.5.5::gentoo
>>> Installing (15 of 16) dev-python/pyxattr-0.5.5::gentoo
>>> Emerging (16 of 16) sys-apps/portage-2.3.19-r1::gentoo
>>> Installing (16 of 16) sys-apps/portage-2.3.19-r1::gentoo
* Messages for package app-misc/ca-certificates-20161130.3.30.2:
* You should run update-ca-certificates manually after etc-update
* To prevent applications relying on system's trusted root certificate store
* from using CAs where at least one major browser vendor Gentoo is following
* has decided to apply trust level restrictions, the following
* certificate(s) were removed:
* mozilla/CA_WoSign_ECC_Root.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign_China.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/Certification_Authority_of_WoSign_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* Messages for package dev-python/pyblake2-1.1.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/setuptools-36.7.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/certifi-2017.4.17:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyxattr-0.5.5:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-apps/portage-2.3.19-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
emerge --quiet --usepkg --buildpkg --newuse -e @system
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-fs/static-dev-0.1
* We have detected that you currently use udev or devfs or devtmpfs
* and this ebuild cannot install to the same mount-point.
* ERROR: sys-fs/static-dev-0.1::gentoo failed (pretend phase):
* Cannot install on udev/devfs tmpfs.
*
* Call stack:
* ebuild.sh, line 124: Called pkg_pretend
* static-dev-0.1.ebuild, line 38: Called abort
* static-dev-0.1.ebuild, line 22: Called die
* The specific snippet of code:
* die "Cannot install on udev/devfs tmpfs."
*
* If you need support, post the output of `emerge --info '=sys-fs/static-dev-0.1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/static-dev-0.1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/die.env'.
* Working directory: '/var/tmp/portage/sys-fs/static-dev-0.1/homedir'
* S: '/var/tmp/portage/sys-fs/static-dev-0.1/work/static-dev-0.1'
>>> Running pre-merge checks for sys-libs/glibc-2.25-r10
>>> Running pre-merge checks for sys-devel/gcc-6.4.0-r1
>>> Running pre-merge checks for sys-libs/pam-1.2.1-r2
>>> Running pre-merge checks for net-misc/openssh-7.5_p1-r4
* Messages for package sys-fs/static-dev-0.1:
* We have detected that you currently use udev or devfs or devtmpfs
* and this ebuild cannot install to the same mount-point.
* ERROR: sys-fs/static-dev-0.1::gentoo failed (pretend phase):
* Cannot install on udev/devfs tmpfs.
*
* Call stack:
* ebuild.sh, line 124: Called pkg_pretend
* static-dev-0.1.ebuild, line 38: Called abort
* static-dev-0.1.ebuild, line 22: Called die
* The specific snippet of code:
* die "Cannot install on udev/devfs tmpfs."
*
* If you need support, post the output of `emerge --info '=sys-fs/static-dev-0.1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/static-dev-0.1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/die.env'.
* Working directory: '/var/tmp/portage/sys-fs/static-dev-0.1/homedir'
* S: '/var/tmp/portage/sys-fs/static-dev-0.1/work/static-dev-0.1'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage3-ia64-20180218T031002Z/.catalyst_lock'
Command exited with non-zero status 1
1962.92user 197.93system 1:01:48elapsed 58%CPU (0avgtext+0avgdata 207552maxresident)k
0inputs+0outputs (23major+34220296minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180218T031002Z.eT81Em/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2018-02-19 9:47 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2018-02-19 9:47 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Envscript support enabled.
Using target: stage3
Building natively for ia64
Source path set to /home/catalyst/tmp/default/stage2-ia64-20180219T031005Z/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /home/catalyst/builds/default/stage2-ia64-20180219T031005Z.tar.bz2
Caching snapshot to /home/catalyst/snapshot_cache/20180219T031005Z/
The autoresume path is /home/catalyst/tmp/default/.autoresume-stage3-ia64-20180219T031005Z/
Location of the package cache is /home/catalyst/packages/default/stage3-ia64-20180219T031005Z/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /home/catalyst/tmp/default/.autoresume-stage3-ia64-20180219T031005Z/
--- Running action sequence: unpack
Starting rsync from /home/catalyst/tmp/default/stage2-ia64-20180219T031005Z/
to /home/catalyst/tmp/default/stage3-ia64-20180219T031005Z/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /home/catalyst/tmp/default/stage3-ia64-20180219T031005Z//tmp
copying chroot-functions.sh to /home/catalyst/tmp/default/stage3-ia64-20180219T031005Z//tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot /home/catalyst/tmp/default/stage3-ia64-20180219T031005Z/
>>> Regenerating /etc/ld.so.cache...
Updating portage with USE=""
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 16) app-misc/mime-types-9::gentoo
>>> Installing (1 of 16) app-misc/mime-types-9::gentoo
>>> Emerging (2 of 16) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (2 of 16) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging (3 of 16) sys-apps/install-xattr-0.5::gentoo
>>> Installing (3 of 16) sys-apps/install-xattr-0.5::gentoo
>>> Emerging (4 of 16) sys-apps/debianutils-4.8.3::gentoo
>>> Installing (4 of 16) sys-apps/debianutils-4.8.3::gentoo
>>> Emerging (5 of 16) app-arch/unzip-6.0_p21-r2::gentoo
>>> Installing (5 of 16) app-arch/unzip-6.0_p21-r2::gentoo
>>> Emerging (6 of 16) sys-apps/attr-2.4.47-r2::gentoo
>>> Installing (6 of 16) sys-apps/attr-2.4.47-r2::gentoo
>>> Emerging (7 of 16) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (7 of 16) sys-libs/gdbm-1.13-r2::gentoo
>>> Emerging (8 of 16) dev-libs/openssl-1.0.2n::gentoo
>>> Installing (8 of 16) dev-libs/openssl-1.0.2n::gentoo
>>> Emerging (9 of 16) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Installing (9 of 16) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Emerging (10 of 16) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (10 of 16) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (11 of 16) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (11 of 16) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (12 of 16) dev-python/pyblake2-1.1.0::gentoo
>>> Installing (12 of 16) dev-python/pyblake2-1.1.0::gentoo
>>> Emerging (13 of 16) dev-python/setuptools-36.7.2::gentoo
>>> Installing (13 of 16) dev-python/setuptools-36.7.2::gentoo
>>> Emerging (14 of 16) dev-python/certifi-2017.4.17::gentoo
>>> Installing (14 of 16) dev-python/certifi-2017.4.17::gentoo
>>> Emerging (15 of 16) dev-python/pyxattr-0.5.5::gentoo
>>> Installing (15 of 16) dev-python/pyxattr-0.5.5::gentoo
>>> Emerging (16 of 16) sys-apps/portage-2.3.19-r1::gentoo
>>> Installing (16 of 16) sys-apps/portage-2.3.19-r1::gentoo
* Messages for package app-misc/ca-certificates-20161130.3.30.2:
* You should run update-ca-certificates manually after etc-update
* To prevent applications relying on system's trusted root certificate store
* from using CAs where at least one major browser vendor Gentoo is following
* has decided to apply trust level restrictions, the following
* certificate(s) were removed:
* mozilla/CA_WoSign_ECC_Root.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign_China.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/Certification_Authority_of_WoSign_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* Messages for package dev-python/pyblake2-1.1.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/setuptools-36.7.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/certifi-2017.4.17:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyxattr-0.5.5:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-apps/portage-2.3.19-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
emerge --quiet --usepkg --buildpkg --newuse -e @system
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-fs/static-dev-0.1
* We have detected that you currently use udev or devfs or devtmpfs
* and this ebuild cannot install to the same mount-point.
* ERROR: sys-fs/static-dev-0.1::gentoo failed (pretend phase):
* Cannot install on udev/devfs tmpfs.
*
* Call stack:
* ebuild.sh, line 124: Called pkg_pretend
* static-dev-0.1.ebuild, line 38: Called abort
* static-dev-0.1.ebuild, line 22: Called die
* The specific snippet of code:
* die "Cannot install on udev/devfs tmpfs."
*
* If you need support, post the output of `emerge --info '=sys-fs/static-dev-0.1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/static-dev-0.1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/die.env'.
* Working directory: '/var/tmp/portage/sys-fs/static-dev-0.1/homedir'
* S: '/var/tmp/portage/sys-fs/static-dev-0.1/work/static-dev-0.1'
>>> Running pre-merge checks for sys-libs/glibc-2.25-r10
>>> Running pre-merge checks for sys-devel/gcc-6.4.0-r1
>>> Running pre-merge checks for sys-libs/pam-1.2.1-r2
>>> Running pre-merge checks for net-misc/openssh-7.5_p1-r4
* Messages for package sys-fs/static-dev-0.1:
* We have detected that you currently use udev or devfs or devtmpfs
* and this ebuild cannot install to the same mount-point.
* ERROR: sys-fs/static-dev-0.1::gentoo failed (pretend phase):
* Cannot install on udev/devfs tmpfs.
*
* Call stack:
* ebuild.sh, line 124: Called pkg_pretend
* static-dev-0.1.ebuild, line 38: Called abort
* static-dev-0.1.ebuild, line 22: Called die
* The specific snippet of code:
* die "Cannot install on udev/devfs tmpfs."
*
* If you need support, post the output of `emerge --info '=sys-fs/static-dev-0.1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/static-dev-0.1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/static-dev-0.1/temp/die.env'.
* Working directory: '/var/tmp/portage/sys-fs/static-dev-0.1/homedir'
* S: '/var/tmp/portage/sys-fs/static-dev-0.1/work/static-dev-0.1'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage3-ia64-20180219T031005Z/.catalyst_lock'
Command exited with non-zero status 1
1902.99user 186.43system 25:56.15elapsed 134%CPU (0avgtext+0avgdata 207552maxresident)k
0inputs+0outputs (0major+34214800minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180219T031005Z.WgXI9Z/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2018-05-22 13:11 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2018-05-22 13:11 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Installing (119 of 180) virtual/editor-0-r1::gentoo
>>> Emerging (120 of 180) sys-process/psmisc-22.21-r3::gentoo
>>> Installing (120 of 180) sys-process/psmisc-22.21-r3::gentoo
>>> Emerging (121 of 180) sys-devel/make-4.2.1::gentoo
>>> Installing (121 of 180) sys-devel/make-4.2.1::gentoo
>>> Emerging (122 of 180) sys-libs/e2fsprogs-libs-1.43.9::gentoo
>>> Installing (122 of 180) sys-libs/e2fsprogs-libs-1.43.9::gentoo
>>> Emerging (123 of 180) dev-libs/popt-1.16-r2::gentoo
>>> Installing (123 of 180) dev-libs/popt-1.16-r2::gentoo
>>> Emerging (124 of 180) net-misc/rsync-3.1.3::gentoo
>>> Installing (124 of 180) net-misc/rsync-3.1.3::gentoo
>>> Emerging (125 of 180) dev-libs/elfutils-0.170-r1::gentoo
>>> Installing (125 of 180) dev-libs/elfutils-0.170-r1::gentoo
>>> Emerging (126 of 180) virtual/libelf-3::gentoo
>>> Installing (126 of 180) virtual/libelf-3::gentoo
>>> Emerging (127 of 180) sys-apps/groff-1.22.2::gentoo
>>> Installing (127 of 180) sys-apps/groff-1.22.2::gentoo
>>> Emerging (128 of 180) sys-devel/libtool-2.4.6-r3::gentoo
>>> Installing (128 of 180) sys-devel/libtool-2.4.6-r3::gentoo
>>> Emerging (129 of 180) sys-devel/flex-2.6.4-r1::gentoo
>>> Installing (129 of 180) sys-devel/flex-2.6.4-r1::gentoo
>>> Emerging (130 of 180) dev-libs/libxml2-2.9.8::gentoo
>>> Installing (130 of 180) dev-libs/libxml2-2.9.8::gentoo
>>> Emerging (131 of 180) sys-devel/gettext-0.19.8.1::gentoo
>>> Installing (131 of 180) sys-devel/gettext-0.19.8.1::gentoo
>>> Emerging (132 of 180) app-arch/tar-1.29-r3::gentoo
>>> Installing (132 of 180) app-arch/tar-1.29-r3::gentoo
>>> Emerging (133 of 180) app-editors/nano-2.8.7::gentoo
>>> Installing (133 of 180) app-editors/nano-2.8.7::gentoo
>>> Emerging (134 of 180) sys-apps/grep-3.0::gentoo
>>> Installing (134 of 180) sys-apps/grep-3.0::gentoo
>>> Emerging (135 of 180) sys-apps/gawk-4.1.4::gentoo
>>> Installing (135 of 180) sys-apps/gawk-4.1.4::gentoo
>>> Emerging (136 of 180) net-misc/wget-1.19.5::gentoo
>>> Installing (136 of 180) net-misc/wget-1.19.5::gentoo
>>> Emerging (137 of 180) sys-apps/diffutils-3.5::gentoo
>>> Installing (137 of 180) sys-apps/diffutils-3.5::gentoo
>>> Emerging (138 of 180) sys-apps/findutils-4.6.0-r1::gentoo
>>> Installing (138 of 180) sys-apps/findutils-4.6.0-r1::gentoo
>>> Emerging (139 of 180) sys-devel/bison-3.0.4-r1::gentoo
>>> Installing (139 of 180) sys-devel/bison-3.0.4-r1::gentoo
>>> Emerging (140 of 180) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Installing (140 of 180) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Emerging (141 of 180) sys-apps/texinfo-6.3::gentoo
>>> Installing (141 of 180) sys-apps/texinfo-6.3::gentoo
>>> Emerging (142 of 180) dev-libs/libgpg-error-1.27-r1::gentoo
>>> Installing (142 of 180) dev-libs/libgpg-error-1.27-r1::gentoo
>>> Emerging (143 of 180) app-text/opensp-1.5.2-r3::gentoo
>>> Installing (143 of 180) app-text/opensp-1.5.2-r3::gentoo
>>> Emerging (144 of 180) sys-devel/gcc-6.4.0-r1::gentoo
>>> Installing (144 of 180) sys-devel/gcc-6.4.0-r1::gentoo
>>> Emerging (145 of 180) sys-apps/iproute2-4.14.1-r2::gentoo
>>> Installing (145 of 180) sys-apps/iproute2-4.14.1-r2::gentoo
>>> Emerging (146 of 180) sys-apps/help2man-1.47.4::gentoo
>>> Failed to emerge sys-apps/help2man-1.47.4, Log file:
>>> '/var/tmp/portage/sys-apps/help2man-1.47.4/temp/build.log'
* Package: sys-apps/help2man-1.47.4
* Repository: gentoo
* Maintainer: base-system@gentoo.org
* USE: elibc_glibc ia64 kernel_linux nls userland_GNU
* FEATURES: preserve-libs sandbox userpriv usersandbox
* Cannot find $EPATCH_SOURCE! Value for $EPATCH_SOURCE is:
*
* /var/tmp/portage/sys-apps/help2man-1.47.4/files/help2man-1.46.1-linguas.patch
* ( help2man-1.46.1-linguas.patch )
* ERROR: sys-apps/help2man-1.47.4::gentoo failed (prepare phase):
* Cannot find $EPATCH_SOURCE!
*
* Call stack:
* ebuild.sh, line 124: Called src_prepare
* environment, line 1855: Called epatch '/var/tmp/portage/sys-apps/help2man-1.47.4/files/help2man-1.46.1-linguas.patch'
* environment, line 500: Called die
* The specific snippet of code:
* die "Cannot find \$EPATCH_SOURCE!";
*
* If you need support, post the output of `emerge --info '=sys-apps/help2man-1.47.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/help2man-1.47.4::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/help2man-1.47.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/help2man-1.47.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/help2man-1.47.4/work/help2man-1.47.4'
* S: '/var/tmp/portage/sys-apps/help2man-1.47.4/work/help2man-1.47.4'
* Messages for package sys-fs/eudev-3.2.5:
*
* As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package sys-apps/opentmpfiles-0.1.3:
* Auto-adding 'opentmpfiles-dev' service to your sysinit runlevel
* Auto-adding 'opentmpfiles-setup' service to your boot runlevel
* Messages for package sys-apps/baselayout-2.4.1-r2:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* You should reboot now to get /run mounted with tmpfs!
* Messages for package sys-libs/timezone-data-2017c:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-apps/sysvinit-2.88-r9:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package sys-apps/busybox-1.28.0:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.28.0 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.28.0 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package sys-libs/glibc-2.25-r11:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-apps/coreutils-8.28-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-devel/gcc-6.4.0-r1:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package sys-apps/help2man-1.47.4:
* Cannot find $EPATCH_SOURCE! Value for $EPATCH_SOURCE is:
*
* /var/tmp/portage/sys-apps/help2man-1.47.4/files/help2man-1.46.1-linguas.patch
* ( help2man-1.46.1-linguas.patch )
* ERROR: sys-apps/help2man-1.47.4::gentoo failed (prepare phase):
* Cannot find $EPATCH_SOURCE!
*
* Call stack:
* ebuild.sh, line 124: Called src_prepare
* environment, line 1855: Called epatch '/var/tmp/portage/sys-apps/help2man-1.47.4/files/help2man-1.46.1-linguas.patch'
* environment, line 500: Called die
* The specific snippet of code:
* die "Cannot find \$EPATCH_SOURCE!";
*
* If you need support, post the output of `emerge --info '=sys-apps/help2man-1.47.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/help2man-1.47.4::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/help2man-1.47.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/help2man-1.47.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/help2man-1.47.4/work/help2man-1.47.4'
* S: '/var/tmp/portage/sys-apps/help2man-1.47.4/work/help2man-1.47.4'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/home/catalyst/tmp/default/stage3-ia64-20180522T031002Z/.catalyst_lock'
Command exited with non-zero status 1
33426.84user 2406.97system 4:37:19elapsed 215%CPU (0avgtext+0avgdata 518816maxresident)k
0inputs+0outputs (89123major+447986181minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180522T031002Z.zy14Q2/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2019-09-06 6:47 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2019-09-06 6:47 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: catalyst -a -c /etc/catalyst/catalyst.conf -f stage3.spec
06 Sep 2019 06:45:05 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
06 Sep 2019 06:45:05 UTC: NOTICE : conf_values[options] = {'snapcache', 'clear-autoresume', 'kerncache', 'autoresume', 'pkgcache', 'seedcache', 'bindist'}
06 Sep 2019 06:45:05 UTC: NOTICE : Processing spec file: stage3.spec
06 Sep 2019 06:45:05 UTC: NOTICE : Using target: stage3
06 Sep 2019 06:45:05 UTC: NOTICE : Source file specification matching setting is: strict
06 Sep 2019 06:45:05 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
06 Sep 2019 06:45:05 UTC: NOTICE : Source path set to /var/tmp/catalyst/tmp/default/stage1-ia64-20190906T031002Z/
06 Sep 2019 06:45:05 UTC: NOTICE : Removing AutoResume Points ...
06 Sep 2019 06:45:05 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190906T031002Z
06 Sep 2019 06:45:05 UTC: NOTICE : --- Running action sequence: unpack
06 Sep 2019 06:45:05 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
06 Sep 2019 06:45:05 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
06 Sep 2019 06:45:05 UTC: NOTICE : Removing AutoResume Points ...
06 Sep 2019 06:45:05 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190906T031002Z
06 Sep 2019 06:45:05 UTC: NOTICE : Clearing the chroot path ...
06 Sep 2019 06:45:05 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/stage3-ia64-20190906T031002Z
06 Sep 2019 06:45:05 UTC: NOTICE : Starting rsync from /var/tmp/catalyst/tmp/default/stage1-ia64-20190906T031002Z/
06 Sep 2019 06:45:05 UTC: NOTICE : to /var/tmp/catalyst/tmp/default/stage3-ia64-20190906T031002Z (this may take some time) ..
06 Sep 2019 06:47:53 UTC: NOTICE : --- Running action sequence: unpack_snapshot
06 Sep 2019 06:47:53 UTC: NOTICE : --- Running action sequence: setup_confdir
06 Sep 2019 06:47:53 UTC: NOTICE : --- Running action sequence: portage_overlay
06 Sep 2019 06:47:53 UTC: NOTICE : --- Running action sequence: base_dirs
06 Sep 2019 06:47:53 UTC: NOTICE : --- Running action sequence: bind
06 Sep 2019 06:47:53 UTC: NOTICE : --- Running action sequence: chroot_setup
06 Sep 2019 06:47:53 UTC: NOTICE : Setting up chroot...
06 Sep 2019 06:47:53 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
06 Sep 2019 06:47:53 UTC: WARNING : If your build fails look here first as the possible problem.
06 Sep 2019 06:47:53 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
06 Sep 2019 06:47:53 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
06 Sep 2019 06:47:53 UTC: WARNING : You have been warned.
06 Sep 2019 06:47:53 UTC: NOTICE : Writing the stage make.conf to: /var/tmp/catalyst/tmp/default/stage3-ia64-20190906T031002Z/etc/portage/make.conf
06 Sep 2019 06:47:53 UTC: NOTICE : STICKY-CONFIG is enabled
06 Sep 2019 06:47:53 UTC: NOTICE : --- Running action sequence: setup_environment
06 Sep 2019 06:47:53 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190906T031002Z/tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190906T031002Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
chroot /var/tmp/catalyst/tmp/default/stage3-ia64-20190906T031002Z /tmp/stage3-chroot.sh
chroot: failed to run command './tmp/stage3-chroot.sh': No such file or directory
06 Sep 2019 06:47:54 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
06 Sep 2019 06:47:54 UTC: ERROR : CatalystError: Stage build aborting due to error.
06 Sep 2019 06:47:54 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1360, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
06 Sep 2019 06:47:54 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /tmp/catalyst-auto.20190906T031002Z.MnxMlB/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2019-09-07 6:49 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2019-09-07 6:49 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: catalyst -a -c /etc/catalyst/catalyst.conf -f stage3.spec
07 Sep 2019 06:46:47 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
07 Sep 2019 06:46:47 UTC: NOTICE : conf_values[options] = {'clear-autoresume', 'bindist', 'autoresume', 'snapcache', 'seedcache', 'kerncache', 'pkgcache'}
07 Sep 2019 06:46:48 UTC: NOTICE : Processing spec file: stage3.spec
07 Sep 2019 06:46:48 UTC: NOTICE : Using target: stage3
07 Sep 2019 06:46:48 UTC: NOTICE : Source file specification matching setting is: strict
07 Sep 2019 06:46:48 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
07 Sep 2019 06:46:48 UTC: NOTICE : Source path set to /var/tmp/catalyst/tmp/default/stage1-ia64-20190907T031002Z/
07 Sep 2019 06:46:48 UTC: NOTICE : Removing AutoResume Points ...
07 Sep 2019 06:46:48 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190907T031002Z
07 Sep 2019 06:46:48 UTC: NOTICE : --- Running action sequence: unpack
07 Sep 2019 06:46:48 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
07 Sep 2019 06:46:48 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
07 Sep 2019 06:46:48 UTC: NOTICE : Removing AutoResume Points ...
07 Sep 2019 06:46:48 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190907T031002Z
07 Sep 2019 06:46:48 UTC: NOTICE : Clearing the chroot path ...
07 Sep 2019 06:46:48 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/stage3-ia64-20190907T031002Z
07 Sep 2019 06:46:48 UTC: NOTICE : Starting rsync from /var/tmp/catalyst/tmp/default/stage1-ia64-20190907T031002Z/
07 Sep 2019 06:46:48 UTC: NOTICE : to /var/tmp/catalyst/tmp/default/stage3-ia64-20190907T031002Z (this may take some time) ..
07 Sep 2019 06:49:23 UTC: NOTICE : --- Running action sequence: unpack_snapshot
07 Sep 2019 06:49:23 UTC: NOTICE : --- Running action sequence: setup_confdir
07 Sep 2019 06:49:23 UTC: NOTICE : --- Running action sequence: portage_overlay
07 Sep 2019 06:49:23 UTC: NOTICE : --- Running action sequence: base_dirs
07 Sep 2019 06:49:23 UTC: NOTICE : --- Running action sequence: bind
07 Sep 2019 06:49:23 UTC: NOTICE : --- Running action sequence: chroot_setup
07 Sep 2019 06:49:23 UTC: NOTICE : Setting up chroot...
07 Sep 2019 06:49:23 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
07 Sep 2019 06:49:23 UTC: WARNING : If your build fails look here first as the possible problem.
07 Sep 2019 06:49:23 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
07 Sep 2019 06:49:23 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
07 Sep 2019 06:49:23 UTC: WARNING : You have been warned.
07 Sep 2019 06:49:23 UTC: NOTICE : Writing the stage make.conf to: /var/tmp/catalyst/tmp/default/stage3-ia64-20190907T031002Z/etc/portage/make.conf
07 Sep 2019 06:49:23 UTC: NOTICE : STICKY-CONFIG is enabled
07 Sep 2019 06:49:23 UTC: NOTICE : --- Running action sequence: setup_environment
07 Sep 2019 06:49:23 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190907T031002Z/tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190907T031002Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
chroot /var/tmp/catalyst/tmp/default/stage3-ia64-20190907T031002Z /tmp/stage3-chroot.sh
chroot: failed to run command './tmp/stage3-chroot.sh': No such file or directory
07 Sep 2019 06:49:23 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
07 Sep 2019 06:49:24 UTC: ERROR : CatalystError: Stage build aborting due to error.
07 Sep 2019 06:49:24 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1360, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
07 Sep 2019 06:49:24 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /tmp/catalyst-auto.20190907T031002Z.TZutVv/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2019-09-08 6:52 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2019-09-08 6:52 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: catalyst -a -c /etc/catalyst/catalyst.conf -f stage3.spec
08 Sep 2019 06:50:05 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
08 Sep 2019 06:50:05 UTC: NOTICE : conf_values[options] = {'seedcache', 'pkgcache', 'kerncache', 'snapcache', 'autoresume', 'clear-autoresume', 'bindist'}
08 Sep 2019 06:50:05 UTC: NOTICE : Processing spec file: stage3.spec
08 Sep 2019 06:50:05 UTC: NOTICE : Using target: stage3
08 Sep 2019 06:50:05 UTC: NOTICE : Source file specification matching setting is: strict
08 Sep 2019 06:50:05 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
08 Sep 2019 06:50:05 UTC: NOTICE : Source path set to /var/tmp/catalyst/tmp/default/stage1-ia64-20190908T031002Z/
08 Sep 2019 06:50:05 UTC: NOTICE : Removing AutoResume Points ...
08 Sep 2019 06:50:05 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190908T031002Z
08 Sep 2019 06:50:05 UTC: NOTICE : --- Running action sequence: unpack
08 Sep 2019 06:50:05 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
08 Sep 2019 06:50:05 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
08 Sep 2019 06:50:05 UTC: NOTICE : Removing AutoResume Points ...
08 Sep 2019 06:50:05 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190908T031002Z
08 Sep 2019 06:50:05 UTC: NOTICE : Clearing the chroot path ...
08 Sep 2019 06:50:05 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/stage3-ia64-20190908T031002Z
08 Sep 2019 06:50:05 UTC: NOTICE : Starting rsync from /var/tmp/catalyst/tmp/default/stage1-ia64-20190908T031002Z/
08 Sep 2019 06:50:05 UTC: NOTICE : to /var/tmp/catalyst/tmp/default/stage3-ia64-20190908T031002Z (this may take some time) ..
08 Sep 2019 06:52:39 UTC: NOTICE : --- Running action sequence: unpack_snapshot
08 Sep 2019 06:52:39 UTC: NOTICE : --- Running action sequence: setup_confdir
08 Sep 2019 06:52:39 UTC: NOTICE : --- Running action sequence: portage_overlay
08 Sep 2019 06:52:39 UTC: NOTICE : --- Running action sequence: base_dirs
08 Sep 2019 06:52:39 UTC: NOTICE : --- Running action sequence: bind
08 Sep 2019 06:52:39 UTC: NOTICE : --- Running action sequence: chroot_setup
08 Sep 2019 06:52:39 UTC: NOTICE : Setting up chroot...
08 Sep 2019 06:52:39 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
08 Sep 2019 06:52:39 UTC: WARNING : If your build fails look here first as the possible problem.
08 Sep 2019 06:52:39 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
08 Sep 2019 06:52:39 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
08 Sep 2019 06:52:39 UTC: WARNING : You have been warned.
08 Sep 2019 06:52:40 UTC: NOTICE : Writing the stage make.conf to: /var/tmp/catalyst/tmp/default/stage3-ia64-20190908T031002Z/etc/portage/make.conf
08 Sep 2019 06:52:40 UTC: NOTICE : STICKY-CONFIG is enabled
08 Sep 2019 06:52:40 UTC: NOTICE : --- Running action sequence: setup_environment
08 Sep 2019 06:52:40 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190908T031002Z/tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190908T031002Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
chroot /var/tmp/catalyst/tmp/default/stage3-ia64-20190908T031002Z /tmp/stage3-chroot.sh
chroot: failed to run command './tmp/stage3-chroot.sh': No such file or directory
08 Sep 2019 06:52:40 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
08 Sep 2019 06:52:40 UTC: ERROR : CatalystError: Stage build aborting due to error.
08 Sep 2019 06:52:40 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1360, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
08 Sep 2019 06:52:40 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /tmp/catalyst-auto.20190908T031002Z.VVsMpz/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2019-09-09 7:15 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2019-09-09 7:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: catalyst -a -c /etc/catalyst/catalyst.conf -f stage3.spec
09 Sep 2019 07:12:19 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
09 Sep 2019 07:12:19 UTC: NOTICE : conf_values[options] = {'kerncache', 'seedcache', 'snapcache', 'pkgcache', 'clear-autoresume', 'autoresume', 'bindist'}
09 Sep 2019 07:12:19 UTC: NOTICE : Processing spec file: stage3.spec
09 Sep 2019 07:12:20 UTC: NOTICE : Using target: stage3
09 Sep 2019 07:12:20 UTC: NOTICE : Source file specification matching setting is: strict
09 Sep 2019 07:12:20 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
09 Sep 2019 07:12:20 UTC: NOTICE : Source path set to /var/tmp/catalyst/tmp/default/stage1-ia64-20190909T031005Z/
09 Sep 2019 07:12:20 UTC: NOTICE : Removing AutoResume Points ...
09 Sep 2019 07:12:20 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190909T031005Z
09 Sep 2019 07:12:20 UTC: NOTICE : --- Running action sequence: unpack
09 Sep 2019 07:12:20 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
09 Sep 2019 07:12:20 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
09 Sep 2019 07:12:20 UTC: NOTICE : Removing AutoResume Points ...
09 Sep 2019 07:12:20 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190909T031005Z
09 Sep 2019 07:12:20 UTC: NOTICE : Clearing the chroot path ...
09 Sep 2019 07:12:20 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/stage3-ia64-20190909T031005Z
09 Sep 2019 07:12:20 UTC: NOTICE : Starting rsync from /var/tmp/catalyst/tmp/default/stage1-ia64-20190909T031005Z/
09 Sep 2019 07:12:20 UTC: NOTICE : to /var/tmp/catalyst/tmp/default/stage3-ia64-20190909T031005Z (this may take some time) ..
09 Sep 2019 07:15:23 UTC: NOTICE : --- Running action sequence: unpack_snapshot
09 Sep 2019 07:15:23 UTC: NOTICE : --- Running action sequence: setup_confdir
09 Sep 2019 07:15:23 UTC: NOTICE : --- Running action sequence: portage_overlay
09 Sep 2019 07:15:23 UTC: NOTICE : --- Running action sequence: base_dirs
09 Sep 2019 07:15:23 UTC: NOTICE : --- Running action sequence: bind
09 Sep 2019 07:15:23 UTC: NOTICE : --- Running action sequence: chroot_setup
09 Sep 2019 07:15:23 UTC: NOTICE : Setting up chroot...
09 Sep 2019 07:15:23 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
09 Sep 2019 07:15:23 UTC: WARNING : If your build fails look here first as the possible problem.
09 Sep 2019 07:15:23 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
09 Sep 2019 07:15:23 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
09 Sep 2019 07:15:23 UTC: WARNING : You have been warned.
09 Sep 2019 07:15:24 UTC: NOTICE : Writing the stage make.conf to: /var/tmp/catalyst/tmp/default/stage3-ia64-20190909T031005Z/etc/portage/make.conf
09 Sep 2019 07:15:24 UTC: NOTICE : STICKY-CONFIG is enabled
09 Sep 2019 07:15:24 UTC: NOTICE : --- Running action sequence: setup_environment
09 Sep 2019 07:15:24 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190909T031005Z/tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190909T031005Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
chroot /var/tmp/catalyst/tmp/default/stage3-ia64-20190909T031005Z /tmp/stage3-chroot.sh
chroot: failed to run command './tmp/stage3-chroot.sh': No such file or directory
09 Sep 2019 07:15:24 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
09 Sep 2019 07:15:24 UTC: ERROR : CatalystError: Stage build aborting due to error.
09 Sep 2019 07:15:24 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1360, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
09 Sep 2019 07:15:24 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /tmp/catalyst-auto.20190909T031005Z.UCURfy/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2019-09-10 6:48 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2019-09-10 6:48 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: catalyst -a -c /etc/catalyst/catalyst.conf -f stage3.spec
10 Sep 2019 06:45:04 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
10 Sep 2019 06:45:04 UTC: NOTICE : conf_values[options] = {'bindist', 'clear-autoresume', 'autoresume', 'kerncache', 'pkgcache', 'snapcache', 'seedcache'}
10 Sep 2019 06:45:04 UTC: NOTICE : Processing spec file: stage3.spec
10 Sep 2019 06:45:04 UTC: NOTICE : Using target: stage3
10 Sep 2019 06:45:04 UTC: NOTICE : Source file specification matching setting is: strict
10 Sep 2019 06:45:04 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
10 Sep 2019 06:45:05 UTC: NOTICE : Source path set to /var/tmp/catalyst/tmp/default/stage1-ia64-20190910T031002Z/
10 Sep 2019 06:45:05 UTC: NOTICE : Removing AutoResume Points ...
10 Sep 2019 06:45:05 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190910T031002Z
10 Sep 2019 06:45:05 UTC: NOTICE : --- Running action sequence: unpack
10 Sep 2019 06:45:05 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
10 Sep 2019 06:45:05 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
10 Sep 2019 06:45:05 UTC: NOTICE : Removing AutoResume Points ...
10 Sep 2019 06:45:05 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190910T031002Z
10 Sep 2019 06:45:05 UTC: NOTICE : Clearing the chroot path ...
10 Sep 2019 06:45:05 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/stage3-ia64-20190910T031002Z
10 Sep 2019 06:45:05 UTC: NOTICE : Starting rsync from /var/tmp/catalyst/tmp/default/stage1-ia64-20190910T031002Z/
10 Sep 2019 06:45:05 UTC: NOTICE : to /var/tmp/catalyst/tmp/default/stage3-ia64-20190910T031002Z (this may take some time) ..
10 Sep 2019 06:48:14 UTC: NOTICE : --- Running action sequence: unpack_snapshot
10 Sep 2019 06:48:14 UTC: NOTICE : --- Running action sequence: setup_confdir
10 Sep 2019 06:48:14 UTC: NOTICE : --- Running action sequence: portage_overlay
10 Sep 2019 06:48:14 UTC: NOTICE : --- Running action sequence: base_dirs
10 Sep 2019 06:48:14 UTC: NOTICE : --- Running action sequence: bind
10 Sep 2019 06:48:14 UTC: NOTICE : --- Running action sequence: chroot_setup
10 Sep 2019 06:48:14 UTC: NOTICE : Setting up chroot...
10 Sep 2019 06:48:14 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
10 Sep 2019 06:48:14 UTC: WARNING : If your build fails look here first as the possible problem.
10 Sep 2019 06:48:14 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
10 Sep 2019 06:48:14 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
10 Sep 2019 06:48:14 UTC: WARNING : You have been warned.
10 Sep 2019 06:48:14 UTC: NOTICE : Writing the stage make.conf to: /var/tmp/catalyst/tmp/default/stage3-ia64-20190910T031002Z/etc/portage/make.conf
10 Sep 2019 06:48:14 UTC: NOTICE : STICKY-CONFIG is enabled
10 Sep 2019 06:48:14 UTC: NOTICE : --- Running action sequence: setup_environment
10 Sep 2019 06:48:14 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190910T031002Z/tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190910T031002Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
chroot /var/tmp/catalyst/tmp/default/stage3-ia64-20190910T031002Z /tmp/stage3-chroot.sh
chroot: failed to run command './tmp/stage3-chroot.sh': No such file or directory
10 Sep 2019 06:48:14 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
10 Sep 2019 06:48:14 UTC: ERROR : CatalystError: Stage build aborting due to error.
10 Sep 2019 06:48:14 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1360, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
10 Sep 2019 06:48:15 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /tmp/catalyst-auto.20190910T031002Z.jxEiwY/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2019-09-11 6:52 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2019-09-11 6:52 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: catalyst -a -c /etc/catalyst/catalyst.conf -f stage3.spec
11 Sep 2019 06:48:26 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
11 Sep 2019 06:48:26 UTC: NOTICE : conf_values[options] = {'clear-autoresume', 'autoresume', 'bindist', 'pkgcache', 'kerncache', 'seedcache', 'snapcache'}
11 Sep 2019 06:48:26 UTC: NOTICE : Processing spec file: stage3.spec
11 Sep 2019 06:48:26 UTC: NOTICE : Using target: stage3
11 Sep 2019 06:48:26 UTC: NOTICE : Source file specification matching setting is: strict
11 Sep 2019 06:48:26 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
11 Sep 2019 06:48:26 UTC: NOTICE : Source path set to /var/tmp/catalyst/tmp/default/stage1-ia64-20190911T031002Z/
11 Sep 2019 06:48:26 UTC: NOTICE : Removing AutoResume Points ...
11 Sep 2019 06:48:26 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190911T031002Z
11 Sep 2019 06:48:26 UTC: NOTICE : --- Running action sequence: unpack
11 Sep 2019 06:48:26 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
11 Sep 2019 06:48:26 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
11 Sep 2019 06:48:26 UTC: NOTICE : Removing AutoResume Points ...
11 Sep 2019 06:48:26 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190911T031002Z
11 Sep 2019 06:48:26 UTC: NOTICE : Clearing the chroot path ...
11 Sep 2019 06:48:26 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/stage3-ia64-20190911T031002Z
11 Sep 2019 06:48:26 UTC: NOTICE : Starting rsync from /var/tmp/catalyst/tmp/default/stage1-ia64-20190911T031002Z/
11 Sep 2019 06:48:26 UTC: NOTICE : to /var/tmp/catalyst/tmp/default/stage3-ia64-20190911T031002Z (this may take some time) ..
11 Sep 2019 06:51:50 UTC: NOTICE : --- Running action sequence: unpack_snapshot
11 Sep 2019 06:51:51 UTC: NOTICE : --- Running action sequence: setup_confdir
11 Sep 2019 06:51:51 UTC: NOTICE : --- Running action sequence: portage_overlay
11 Sep 2019 06:51:51 UTC: NOTICE : --- Running action sequence: base_dirs
11 Sep 2019 06:51:51 UTC: NOTICE : --- Running action sequence: bind
11 Sep 2019 06:52:12 UTC: NOTICE : --- Running action sequence: chroot_setup
11 Sep 2019 06:52:12 UTC: NOTICE : Setting up chroot...
11 Sep 2019 06:52:12 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
11 Sep 2019 06:52:12 UTC: WARNING : If your build fails look here first as the possible problem.
11 Sep 2019 06:52:12 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
11 Sep 2019 06:52:12 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
11 Sep 2019 06:52:12 UTC: WARNING : You have been warned.
11 Sep 2019 06:52:12 UTC: NOTICE : Writing the stage make.conf to: /var/tmp/catalyst/tmp/default/stage3-ia64-20190911T031002Z/etc/portage/make.conf
11 Sep 2019 06:52:12 UTC: NOTICE : STICKY-CONFIG is enabled
11 Sep 2019 06:52:12 UTC: NOTICE : --- Running action sequence: setup_environment
11 Sep 2019 06:52:12 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190911T031002Z/tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190911T031002Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
chroot /var/tmp/catalyst/tmp/default/stage3-ia64-20190911T031002Z /tmp/stage3-chroot.sh
chroot: failed to run command './tmp/stage3-chroot.sh': No such file or directory
11 Sep 2019 06:52:12 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
11 Sep 2019 06:52:12 UTC: ERROR : CatalystError: Stage build aborting due to error.
11 Sep 2019 06:52:12 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1360, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
11 Sep 2019 06:52:12 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /tmp/catalyst-auto.20190911T031002Z.xwrvLF/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2019-09-12 6:51 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2019-09-12 6:51 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: catalyst -a -c /etc/catalyst/catalyst.conf -f stage3.spec
12 Sep 2019 06:49:08 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
12 Sep 2019 06:49:08 UTC: NOTICE : conf_values[options] = {'snapcache', 'seedcache', 'kerncache', 'bindist', 'autoresume', 'clear-autoresume', 'pkgcache'}
12 Sep 2019 06:49:08 UTC: NOTICE : Processing spec file: stage3.spec
12 Sep 2019 06:49:08 UTC: NOTICE : Using target: stage3
12 Sep 2019 06:49:08 UTC: NOTICE : Source file specification matching setting is: strict
12 Sep 2019 06:49:08 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
12 Sep 2019 06:49:08 UTC: NOTICE : Source path set to /var/tmp/catalyst/tmp/default/stage1-ia64-20190912T031002Z/
12 Sep 2019 06:49:08 UTC: NOTICE : Removing AutoResume Points ...
12 Sep 2019 06:49:08 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190912T031002Z
12 Sep 2019 06:49:08 UTC: NOTICE : --- Running action sequence: unpack
12 Sep 2019 06:49:08 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
12 Sep 2019 06:49:08 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
12 Sep 2019 06:49:08 UTC: NOTICE : Removing AutoResume Points ...
12 Sep 2019 06:49:08 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190912T031002Z
12 Sep 2019 06:49:08 UTC: NOTICE : Clearing the chroot path ...
12 Sep 2019 06:49:08 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/stage3-ia64-20190912T031002Z
12 Sep 2019 06:49:08 UTC: NOTICE : Starting rsync from /var/tmp/catalyst/tmp/default/stage1-ia64-20190912T031002Z/
12 Sep 2019 06:49:08 UTC: NOTICE : to /var/tmp/catalyst/tmp/default/stage3-ia64-20190912T031002Z (this may take some time) ..
12 Sep 2019 06:51:51 UTC: NOTICE : --- Running action sequence: unpack_snapshot
12 Sep 2019 06:51:51 UTC: NOTICE : --- Running action sequence: setup_confdir
12 Sep 2019 06:51:51 UTC: NOTICE : --- Running action sequence: portage_overlay
12 Sep 2019 06:51:51 UTC: NOTICE : --- Running action sequence: base_dirs
12 Sep 2019 06:51:51 UTC: NOTICE : --- Running action sequence: bind
12 Sep 2019 06:51:51 UTC: NOTICE : --- Running action sequence: chroot_setup
12 Sep 2019 06:51:51 UTC: NOTICE : Setting up chroot...
12 Sep 2019 06:51:51 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
12 Sep 2019 06:51:51 UTC: WARNING : If your build fails look here first as the possible problem.
12 Sep 2019 06:51:51 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
12 Sep 2019 06:51:51 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
12 Sep 2019 06:51:51 UTC: WARNING : You have been warned.
12 Sep 2019 06:51:51 UTC: NOTICE : Writing the stage make.conf to: /var/tmp/catalyst/tmp/default/stage3-ia64-20190912T031002Z/etc/portage/make.conf
12 Sep 2019 06:51:51 UTC: NOTICE : STICKY-CONFIG is enabled
12 Sep 2019 06:51:51 UTC: NOTICE : --- Running action sequence: setup_environment
12 Sep 2019 06:51:51 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190912T031002Z/tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190912T031002Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
chroot /var/tmp/catalyst/tmp/default/stage3-ia64-20190912T031002Z /tmp/stage3-chroot.sh
chroot: failed to run command './tmp/stage3-chroot.sh': No such file or directory
12 Sep 2019 06:51:51 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
12 Sep 2019 06:51:51 UTC: ERROR : CatalystError: Stage build aborting due to error.
12 Sep 2019 06:51:51 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1360, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
12 Sep 2019 06:51:51 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /tmp/catalyst-auto.20190912T031002Z.1X7w8w/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2019-09-13 1:27 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2019-09-13 1:27 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: catalyst -a -c /etc/catalyst/catalyst.conf -f stage3.spec
13 Sep 2019 01:25:12 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
13 Sep 2019 01:25:12 UTC: NOTICE : conf_values[options] = {'clear-autoresume', 'bindist', 'pkgcache', 'autoresume', 'snapcache', 'kerncache', 'seedcache'}
13 Sep 2019 01:25:12 UTC: NOTICE : Processing spec file: stage3.spec
13 Sep 2019 01:25:12 UTC: NOTICE : Using target: stage3
13 Sep 2019 01:25:12 UTC: NOTICE : Source file specification matching setting is: strict
13 Sep 2019 01:25:12 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
13 Sep 2019 01:25:12 UTC: NOTICE : Source path set to /var/tmp/catalyst/tmp/default/stage1-ia64-20190912T214858Z/
13 Sep 2019 01:25:12 UTC: NOTICE : Removing AutoResume Points ...
13 Sep 2019 01:25:12 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190912T214858Z
13 Sep 2019 01:25:12 UTC: NOTICE : --- Running action sequence: unpack
13 Sep 2019 01:25:12 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
13 Sep 2019 01:25:12 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
13 Sep 2019 01:25:12 UTC: NOTICE : Removing AutoResume Points ...
13 Sep 2019 01:25:12 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190912T214858Z
13 Sep 2019 01:25:12 UTC: NOTICE : Clearing the chroot path ...
13 Sep 2019 01:25:12 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/stage3-ia64-20190912T214858Z
13 Sep 2019 01:25:12 UTC: NOTICE : Starting rsync from /var/tmp/catalyst/tmp/default/stage1-ia64-20190912T214858Z/
13 Sep 2019 01:25:12 UTC: NOTICE : to /var/tmp/catalyst/tmp/default/stage3-ia64-20190912T214858Z (this may take some time) ..
13 Sep 2019 01:27:11 UTC: NOTICE : --- Running action sequence: unpack_snapshot
13 Sep 2019 01:27:11 UTC: NOTICE : --- Running action sequence: setup_confdir
13 Sep 2019 01:27:11 UTC: NOTICE : --- Running action sequence: portage_overlay
13 Sep 2019 01:27:11 UTC: NOTICE : --- Running action sequence: base_dirs
13 Sep 2019 01:27:11 UTC: NOTICE : --- Running action sequence: bind
13 Sep 2019 01:27:12 UTC: NOTICE : --- Running action sequence: chroot_setup
13 Sep 2019 01:27:12 UTC: NOTICE : Setting up chroot...
13 Sep 2019 01:27:12 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
13 Sep 2019 01:27:12 UTC: WARNING : If your build fails look here first as the possible problem.
13 Sep 2019 01:27:12 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
13 Sep 2019 01:27:12 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
13 Sep 2019 01:27:12 UTC: WARNING : You have been warned.
13 Sep 2019 01:27:12 UTC: NOTICE : Writing the stage make.conf to: /var/tmp/catalyst/tmp/default/stage3-ia64-20190912T214858Z/etc/portage/make.conf
13 Sep 2019 01:27:12 UTC: NOTICE : STICKY-CONFIG is enabled
13 Sep 2019 01:27:12 UTC: NOTICE : --- Running action sequence: setup_environment
13 Sep 2019 01:27:12 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190912T214858Z/tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190912T214858Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
chroot /var/tmp/catalyst/tmp/default/stage3-ia64-20190912T214858Z /tmp/stage3-chroot.sh
chroot: failed to run command './tmp/stage3-chroot.sh': No such file or directory
13 Sep 2019 01:27:12 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
13 Sep 2019 01:27:12 UTC: ERROR : CatalystError: Stage build aborting due to error.
13 Sep 2019 01:27:12 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1360, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
13 Sep 2019 01:27:12 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /tmp/catalyst-auto.20190912T214858Z.rudxPB/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2019-09-13 6:46 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2019-09-13 6:46 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage3.spec
13 Sep 2019 06:45:11 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
13 Sep 2019 06:45:11 UTC: NOTICE : conf_values[options] = {'bindist', 'clear-autoresume', 'kerncache', 'seedcache', 'autoresume', 'pkgcache', 'snapcache'}
13 Sep 2019 06:45:11 UTC: NOTICE : Processing spec file: stage3.spec
13 Sep 2019 06:45:11 UTC: NOTICE : Using target: stage3
13 Sep 2019 06:45:11 UTC: NOTICE : Source file specification matching setting is: strict
13 Sep 2019 06:45:11 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
13 Sep 2019 06:45:11 UTC: NOTICE : Source path set to /var/tmp/catalyst/tmp/default/stage1-ia64-20190913T031002Z/
13 Sep 2019 06:45:11 UTC: NOTICE : Removing AutoResume Points ...
13 Sep 2019 06:45:11 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190913T031002Z
13 Sep 2019 06:45:11 UTC: NOTICE : --- Running action sequence: unpack
13 Sep 2019 06:45:11 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
13 Sep 2019 06:45:11 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
13 Sep 2019 06:45:11 UTC: NOTICE : Removing AutoResume Points ...
13 Sep 2019 06:45:11 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190913T031002Z
13 Sep 2019 06:45:11 UTC: NOTICE : Clearing the chroot path ...
13 Sep 2019 06:45:11 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/stage3-ia64-20190913T031002Z
13 Sep 2019 06:45:11 UTC: NOTICE : Starting rsync from /var/tmp/catalyst/tmp/default/stage1-ia64-20190913T031002Z/
13 Sep 2019 06:45:11 UTC: NOTICE : to /var/tmp/catalyst/tmp/default/stage3-ia64-20190913T031002Z (this may take some time) ..
13 Sep 2019 06:46:27 UTC: NOTICE : --- Running action sequence: unpack_snapshot
13 Sep 2019 06:46:27 UTC: NOTICE : --- Running action sequence: setup_confdir
13 Sep 2019 06:46:27 UTC: NOTICE : --- Running action sequence: portage_overlay
13 Sep 2019 06:46:27 UTC: NOTICE : --- Running action sequence: base_dirs
13 Sep 2019 06:46:27 UTC: NOTICE : --- Running action sequence: bind
13 Sep 2019 06:46:27 UTC: NOTICE : --- Running action sequence: chroot_setup
13 Sep 2019 06:46:27 UTC: NOTICE : Setting up chroot...
13 Sep 2019 06:46:27 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
13 Sep 2019 06:46:27 UTC: WARNING : If your build fails look here first as the possible problem.
13 Sep 2019 06:46:27 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
13 Sep 2019 06:46:27 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
13 Sep 2019 06:46:27 UTC: WARNING : You have been warned.
13 Sep 2019 06:46:28 UTC: NOTICE : Writing the stage make.conf to: /var/tmp/catalyst/tmp/default/stage3-ia64-20190913T031002Z/etc/portage/make.conf
13 Sep 2019 06:46:28 UTC: NOTICE : STICKY-CONFIG is enabled
13 Sep 2019 06:46:28 UTC: NOTICE : --- Running action sequence: setup_environment
13 Sep 2019 06:46:28 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190913T031002Z/tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190913T031002Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
chroot /var/tmp/catalyst/tmp/default/stage3-ia64-20190913T031002Z /tmp/stage3-chroot.sh
chroot: failed to run command './tmp/stage3-chroot.sh': No such file or directory
13 Sep 2019 06:46:28 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
13 Sep 2019 06:46:28 UTC: ERROR : CatalystError: Stage build aborting due to error.
13 Sep 2019 06:46:28 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1360, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
13 Sep 2019 06:46:28 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
18.27user 6.65system 1:17.44elapsed 32%CPU (0avgtext+0avgdata 29536maxresident)k
0inputs+0outputs (0major+20595minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190913T031002Z.QLJThc/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2019-09-14 6:48 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2019-09-14 6:48 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage3.spec
14 Sep 2019 06:47:49 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
14 Sep 2019 06:47:49 UTC: NOTICE : conf_values[options] = {'bindist', 'autoresume', 'pkgcache', 'kerncache', 'clear-autoresume', 'snapcache', 'seedcache'}
14 Sep 2019 06:47:49 UTC: NOTICE : Processing spec file: stage3.spec
14 Sep 2019 06:47:50 UTC: NOTICE : Using target: stage3
14 Sep 2019 06:47:50 UTC: NOTICE : Source file specification matching setting is: strict
14 Sep 2019 06:47:50 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
14 Sep 2019 06:47:50 UTC: NOTICE : Source path set to /var/tmp/catalyst/tmp/default/stage1-ia64-20190914T031003Z/
14 Sep 2019 06:47:50 UTC: NOTICE : Removing AutoResume Points ...
14 Sep 2019 06:47:50 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190914T031003Z
14 Sep 2019 06:47:50 UTC: NOTICE : --- Running action sequence: unpack
14 Sep 2019 06:47:50 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
14 Sep 2019 06:47:50 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
14 Sep 2019 06:47:50 UTC: NOTICE : Removing AutoResume Points ...
14 Sep 2019 06:47:50 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190914T031003Z
14 Sep 2019 06:47:50 UTC: NOTICE : Clearing the chroot path ...
14 Sep 2019 06:47:50 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/stage3-ia64-20190914T031003Z
14 Sep 2019 06:47:50 UTC: NOTICE : Starting rsync from /var/tmp/catalyst/tmp/default/stage1-ia64-20190914T031003Z/
14 Sep 2019 06:47:50 UTC: NOTICE : to /var/tmp/catalyst/tmp/default/stage3-ia64-20190914T031003Z (this may take some time) ..
14 Sep 2019 06:48:05 UTC: NOTICE : --- Running action sequence: unpack_snapshot
14 Sep 2019 06:48:05 UTC: NOTICE : --- Running action sequence: setup_confdir
14 Sep 2019 06:48:05 UTC: NOTICE : --- Running action sequence: portage_overlay
14 Sep 2019 06:48:05 UTC: NOTICE : --- Running action sequence: base_dirs
14 Sep 2019 06:48:05 UTC: NOTICE : --- Running action sequence: bind
14 Sep 2019 06:48:05 UTC: NOTICE : --- Running action sequence: chroot_setup
14 Sep 2019 06:48:05 UTC: NOTICE : Setting up chroot...
14 Sep 2019 06:48:05 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
14 Sep 2019 06:48:05 UTC: WARNING : If your build fails look here first as the possible problem.
14 Sep 2019 06:48:05 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
14 Sep 2019 06:48:05 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
14 Sep 2019 06:48:05 UTC: WARNING : You have been warned.
14 Sep 2019 06:48:06 UTC: NOTICE : Writing the stage make.conf to: /var/tmp/catalyst/tmp/default/stage3-ia64-20190914T031003Z/etc/portage/make.conf
14 Sep 2019 06:48:06 UTC: NOTICE : STICKY-CONFIG is enabled
14 Sep 2019 06:48:06 UTC: NOTICE : --- Running action sequence: setup_environment
14 Sep 2019 06:48:06 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190914T031003Z/tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190914T031003Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
chroot /var/tmp/catalyst/tmp/default/stage3-ia64-20190914T031003Z /tmp/stage3-chroot.sh
chroot: failed to run command './tmp/stage3-chroot.sh': No such file or directory
14 Sep 2019 06:48:06 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
14 Sep 2019 06:48:06 UTC: ERROR : CatalystError: Stage build aborting due to error.
14 Sep 2019 06:48:06 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1360, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
14 Sep 2019 06:48:07 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
15.86user 6.32system 0:18.21elapsed 121%CPU (0avgtext+0avgdata 30112maxresident)k
0inputs+0outputs (5major+20533minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190914T031003Z.9DqpBx/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2019-09-15 6:52 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2019-09-15 6:52 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage3.spec
15 Sep 2019 06:49:42 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
15 Sep 2019 06:49:42 UTC: NOTICE : conf_values[options] = {'seedcache', 'bindist', 'autoresume', 'clear-autoresume', 'pkgcache', 'snapcache', 'kerncache'}
15 Sep 2019 06:49:42 UTC: NOTICE : Processing spec file: stage3.spec
15 Sep 2019 06:49:42 UTC: NOTICE : Using target: stage3
15 Sep 2019 06:49:42 UTC: NOTICE : Source file specification matching setting is: strict
15 Sep 2019 06:49:42 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
15 Sep 2019 06:49:42 UTC: NOTICE : Source path set to /var/tmp/catalyst/tmp/default/stage1-ia64-20190915T031002Z/
15 Sep 2019 06:49:42 UTC: NOTICE : Removing AutoResume Points ...
15 Sep 2019 06:49:42 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190915T031002Z
15 Sep 2019 06:49:42 UTC: NOTICE : --- Running action sequence: unpack
15 Sep 2019 06:49:42 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
15 Sep 2019 06:49:42 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
15 Sep 2019 06:49:42 UTC: NOTICE : Removing AutoResume Points ...
15 Sep 2019 06:49:42 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190915T031002Z
15 Sep 2019 06:49:42 UTC: NOTICE : Clearing the chroot path ...
15 Sep 2019 06:49:42 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/stage3-ia64-20190915T031002Z
15 Sep 2019 06:49:42 UTC: NOTICE : Starting rsync from /var/tmp/catalyst/tmp/default/stage1-ia64-20190915T031002Z/
15 Sep 2019 06:49:42 UTC: NOTICE : to /var/tmp/catalyst/tmp/default/stage3-ia64-20190915T031002Z (this may take some time) ..
15 Sep 2019 06:52:36 UTC: NOTICE : --- Running action sequence: unpack_snapshot
15 Sep 2019 06:52:36 UTC: NOTICE : --- Running action sequence: setup_confdir
15 Sep 2019 06:52:36 UTC: NOTICE : --- Running action sequence: portage_overlay
15 Sep 2019 06:52:36 UTC: NOTICE : --- Running action sequence: base_dirs
15 Sep 2019 06:52:36 UTC: NOTICE : --- Running action sequence: bind
15 Sep 2019 06:52:36 UTC: NOTICE : --- Running action sequence: chroot_setup
15 Sep 2019 06:52:36 UTC: NOTICE : Setting up chroot...
15 Sep 2019 06:52:36 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
15 Sep 2019 06:52:36 UTC: WARNING : If your build fails look here first as the possible problem.
15 Sep 2019 06:52:36 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
15 Sep 2019 06:52:36 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
15 Sep 2019 06:52:36 UTC: WARNING : You have been warned.
15 Sep 2019 06:52:36 UTC: NOTICE : Writing the stage make.conf to: /var/tmp/catalyst/tmp/default/stage3-ia64-20190915T031002Z/etc/portage/make.conf
15 Sep 2019 06:52:36 UTC: NOTICE : STICKY-CONFIG is enabled
15 Sep 2019 06:52:36 UTC: NOTICE : --- Running action sequence: setup_environment
15 Sep 2019 06:52:36 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190915T031002Z/tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190915T031002Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
chroot /var/tmp/catalyst/tmp/default/stage3-ia64-20190915T031002Z /tmp/stage3-chroot.sh
chroot: failed to run command './tmp/stage3-chroot.sh': No such file or directory
15 Sep 2019 06:52:36 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
15 Sep 2019 06:52:36 UTC: ERROR : CatalystError: Stage build aborting due to error.
15 Sep 2019 06:52:36 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1360, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
15 Sep 2019 06:52:37 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
21.23user 7.90system 2:54.82elapsed 16%CPU (0avgtext+0avgdata 29024maxresident)k
0inputs+0outputs (0major+20628minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190915T031002Z.sYlyBC/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2019-09-16 7:39 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2019-09-16 7:39 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage3.spec
16 Sep 2019 07:36:03 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
16 Sep 2019 07:36:03 UTC: NOTICE : conf_values[options] = {'snapcache', 'pkgcache', 'kerncache', 'clear-autoresume', 'seedcache', 'autoresume', 'bindist'}
16 Sep 2019 07:36:03 UTC: NOTICE : Processing spec file: stage3.spec
16 Sep 2019 07:36:04 UTC: NOTICE : Using target: stage3
16 Sep 2019 07:36:04 UTC: NOTICE : Source file specification matching setting is: strict
16 Sep 2019 07:36:04 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
16 Sep 2019 07:36:04 UTC: NOTICE : Source path set to /var/tmp/catalyst/tmp/default/stage1-ia64-20190916T031004Z/
16 Sep 2019 07:36:04 UTC: NOTICE : Removing AutoResume Points ...
16 Sep 2019 07:36:04 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190916T031004Z
16 Sep 2019 07:36:04 UTC: NOTICE : --- Running action sequence: unpack
16 Sep 2019 07:36:04 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
16 Sep 2019 07:36:04 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
16 Sep 2019 07:36:04 UTC: NOTICE : Removing AutoResume Points ...
16 Sep 2019 07:36:04 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190916T031004Z
16 Sep 2019 07:36:04 UTC: NOTICE : Clearing the chroot path ...
16 Sep 2019 07:36:04 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/stage3-ia64-20190916T031004Z
16 Sep 2019 07:36:04 UTC: NOTICE : Starting rsync from /var/tmp/catalyst/tmp/default/stage1-ia64-20190916T031004Z/
16 Sep 2019 07:36:04 UTC: NOTICE : to /var/tmp/catalyst/tmp/default/stage3-ia64-20190916T031004Z (this may take some time) ..
16 Sep 2019 07:39:47 UTC: NOTICE : --- Running action sequence: unpack_snapshot
16 Sep 2019 07:39:48 UTC: NOTICE : --- Running action sequence: setup_confdir
16 Sep 2019 07:39:48 UTC: NOTICE : --- Running action sequence: portage_overlay
16 Sep 2019 07:39:48 UTC: NOTICE : --- Running action sequence: base_dirs
16 Sep 2019 07:39:48 UTC: NOTICE : --- Running action sequence: bind
16 Sep 2019 07:39:48 UTC: NOTICE : --- Running action sequence: chroot_setup
16 Sep 2019 07:39:48 UTC: NOTICE : Setting up chroot...
16 Sep 2019 07:39:48 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
16 Sep 2019 07:39:48 UTC: WARNING : If your build fails look here first as the possible problem.
16 Sep 2019 07:39:48 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
16 Sep 2019 07:39:48 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
16 Sep 2019 07:39:48 UTC: WARNING : You have been warned.
16 Sep 2019 07:39:48 UTC: NOTICE : Writing the stage make.conf to: /var/tmp/catalyst/tmp/default/stage3-ia64-20190916T031004Z/etc/portage/make.conf
16 Sep 2019 07:39:48 UTC: NOTICE : STICKY-CONFIG is enabled
16 Sep 2019 07:39:48 UTC: NOTICE : --- Running action sequence: setup_environment
16 Sep 2019 07:39:48 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190916T031004Z/tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190916T031004Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
chroot /var/tmp/catalyst/tmp/default/stage3-ia64-20190916T031004Z /tmp/stage3-chroot.sh
chroot: failed to run command './tmp/stage3-chroot.sh': No such file or directory
16 Sep 2019 07:39:48 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
16 Sep 2019 07:39:48 UTC: ERROR : CatalystError: Stage build aborting due to error.
16 Sep 2019 07:39:48 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1360, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
16 Sep 2019 07:39:48 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
18.92user 7.03system 3:47.43elapsed 11%CPU (0avgtext+0avgdata 30144maxresident)k
0inputs+0outputs (9major+20526minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190916T031004Z.Ypc6kB/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2019-09-17 6:52 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2019-09-17 6:52 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage3.spec
17 Sep 2019 06:49:25 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
17 Sep 2019 06:49:25 UTC: NOTICE : conf_values[options] = {'pkgcache', 'clear-autoresume', 'snapcache', 'kerncache', 'seedcache', 'bindist', 'autoresume'}
17 Sep 2019 06:49:25 UTC: NOTICE : Processing spec file: stage3.spec
17 Sep 2019 06:49:25 UTC: NOTICE : Using target: stage3
17 Sep 2019 06:49:25 UTC: NOTICE : Source file specification matching setting is: strict
17 Sep 2019 06:49:25 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
17 Sep 2019 06:49:25 UTC: NOTICE : Source path set to /var/tmp/catalyst/tmp/default/stage1-ia64-20190917T031004Z/
17 Sep 2019 06:49:25 UTC: NOTICE : Removing AutoResume Points ...
17 Sep 2019 06:49:25 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190917T031004Z
17 Sep 2019 06:49:25 UTC: NOTICE : --- Running action sequence: unpack
17 Sep 2019 06:49:25 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
17 Sep 2019 06:49:25 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
17 Sep 2019 06:49:25 UTC: NOTICE : Removing AutoResume Points ...
17 Sep 2019 06:49:25 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190917T031004Z
17 Sep 2019 06:49:25 UTC: NOTICE : Clearing the chroot path ...
17 Sep 2019 06:49:25 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/stage3-ia64-20190917T031004Z
17 Sep 2019 06:49:25 UTC: NOTICE : Starting rsync from /var/tmp/catalyst/tmp/default/stage1-ia64-20190917T031004Z/
17 Sep 2019 06:49:25 UTC: NOTICE : to /var/tmp/catalyst/tmp/default/stage3-ia64-20190917T031004Z (this may take some time) ..
17 Sep 2019 06:52:29 UTC: NOTICE : --- Running action sequence: unpack_snapshot
17 Sep 2019 06:52:29 UTC: NOTICE : --- Running action sequence: setup_confdir
17 Sep 2019 06:52:29 UTC: NOTICE : --- Running action sequence: portage_overlay
17 Sep 2019 06:52:29 UTC: NOTICE : --- Running action sequence: base_dirs
17 Sep 2019 06:52:29 UTC: NOTICE : --- Running action sequence: bind
17 Sep 2019 06:52:29 UTC: NOTICE : --- Running action sequence: chroot_setup
17 Sep 2019 06:52:29 UTC: NOTICE : Setting up chroot...
17 Sep 2019 06:52:29 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
17 Sep 2019 06:52:29 UTC: WARNING : If your build fails look here first as the possible problem.
17 Sep 2019 06:52:29 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
17 Sep 2019 06:52:29 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
17 Sep 2019 06:52:29 UTC: WARNING : You have been warned.
17 Sep 2019 06:52:30 UTC: NOTICE : Writing the stage make.conf to: /var/tmp/catalyst/tmp/default/stage3-ia64-20190917T031004Z/etc/portage/make.conf
17 Sep 2019 06:52:30 UTC: NOTICE : STICKY-CONFIG is enabled
17 Sep 2019 06:52:30 UTC: NOTICE : --- Running action sequence: setup_environment
17 Sep 2019 06:52:30 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190917T031004Z/tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190917T031004Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
chroot /var/tmp/catalyst/tmp/default/stage3-ia64-20190917T031004Z /tmp/stage3-chroot.sh
chroot: failed to run command './tmp/stage3-chroot.sh': No such file or directory
17 Sep 2019 06:52:30 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
17 Sep 2019 06:52:30 UTC: ERROR : CatalystError: Stage build aborting due to error.
17 Sep 2019 06:52:30 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1360, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
17 Sep 2019 06:52:30 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
19.18user 7.22system 3:05.32elapsed 14%CPU (0avgtext+0avgdata 29024maxresident)k
0inputs+0outputs (9major+20491minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190917T031004Z.C2hjgk/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2019-09-18 6:47 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2019-09-18 6:47 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage3.spec
18 Sep 2019 06:44:34 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
18 Sep 2019 06:44:34 UTC: NOTICE : conf_values[options] = {'autoresume', 'clear-autoresume', 'bindist', 'pkgcache', 'seedcache', 'kerncache', 'snapcache'}
18 Sep 2019 06:44:34 UTC: NOTICE : Processing spec file: stage3.spec
18 Sep 2019 06:44:34 UTC: NOTICE : Using target: stage3
18 Sep 2019 06:44:34 UTC: NOTICE : Source file specification matching setting is: strict
18 Sep 2019 06:44:34 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
18 Sep 2019 06:44:34 UTC: NOTICE : Source path set to /var/tmp/catalyst/tmp/default/stage1-ia64-20190918T031004Z/
18 Sep 2019 06:44:34 UTC: NOTICE : Removing AutoResume Points ...
18 Sep 2019 06:44:34 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190918T031004Z
18 Sep 2019 06:44:34 UTC: NOTICE : --- Running action sequence: unpack
18 Sep 2019 06:44:34 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
18 Sep 2019 06:44:34 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
18 Sep 2019 06:44:34 UTC: NOTICE : Removing AutoResume Points ...
18 Sep 2019 06:44:34 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190918T031004Z
18 Sep 2019 06:44:34 UTC: NOTICE : Clearing the chroot path ...
18 Sep 2019 06:44:34 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/stage3-ia64-20190918T031004Z
18 Sep 2019 06:44:34 UTC: NOTICE : Starting rsync from /var/tmp/catalyst/tmp/default/stage1-ia64-20190918T031004Z/
18 Sep 2019 06:44:34 UTC: NOTICE : to /var/tmp/catalyst/tmp/default/stage3-ia64-20190918T031004Z (this may take some time) ..
18 Sep 2019 06:47:35 UTC: NOTICE : --- Running action sequence: unpack_snapshot
18 Sep 2019 06:47:35 UTC: NOTICE : --- Running action sequence: setup_confdir
18 Sep 2019 06:47:35 UTC: NOTICE : --- Running action sequence: portage_overlay
18 Sep 2019 06:47:35 UTC: NOTICE : --- Running action sequence: base_dirs
18 Sep 2019 06:47:35 UTC: NOTICE : --- Running action sequence: bind
18 Sep 2019 06:47:35 UTC: NOTICE : --- Running action sequence: chroot_setup
18 Sep 2019 06:47:35 UTC: NOTICE : Setting up chroot...
18 Sep 2019 06:47:35 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
18 Sep 2019 06:47:35 UTC: WARNING : If your build fails look here first as the possible problem.
18 Sep 2019 06:47:35 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
18 Sep 2019 06:47:35 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
18 Sep 2019 06:47:35 UTC: WARNING : You have been warned.
18 Sep 2019 06:47:35 UTC: NOTICE : Writing the stage make.conf to: /var/tmp/catalyst/tmp/default/stage3-ia64-20190918T031004Z/etc/portage/make.conf
18 Sep 2019 06:47:35 UTC: NOTICE : STICKY-CONFIG is enabled
18 Sep 2019 06:47:35 UTC: NOTICE : --- Running action sequence: setup_environment
18 Sep 2019 06:47:35 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190918T031004Z/tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190918T031004Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
chroot /var/tmp/catalyst/tmp/default/stage3-ia64-20190918T031004Z /tmp/stage3-chroot.sh
chroot: failed to run command './tmp/stage3-chroot.sh': No such file or directory
18 Sep 2019 06:47:35 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
18 Sep 2019 06:47:35 UTC: ERROR : CatalystError: Stage build aborting due to error.
18 Sep 2019 06:47:35 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1360, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
18 Sep 2019 06:47:35 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
19.89user 7.42system 3:01.99elapsed 15%CPU (0avgtext+0avgdata 29024maxresident)k
0inputs+0outputs (0major+20480minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190918T031004Z.F0h2FQ/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2019-09-19 6:43 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2019-09-19 6:43 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage3.spec
19 Sep 2019 06:39:51 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
19 Sep 2019 06:39:51 UTC: NOTICE : conf_values[options] = {'seedcache', 'clear-autoresume', 'autoresume', 'bindist', 'kerncache', 'pkgcache', 'snapcache'}
19 Sep 2019 06:39:51 UTC: NOTICE : Processing spec file: stage3.spec
19 Sep 2019 06:39:51 UTC: NOTICE : Using target: stage3
19 Sep 2019 06:39:51 UTC: NOTICE : Source file specification matching setting is: strict
19 Sep 2019 06:39:51 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
19 Sep 2019 06:39:51 UTC: NOTICE : Source path set to /var/tmp/catalyst/tmp/default/stage1-ia64-20190919T031003Z/
19 Sep 2019 06:39:51 UTC: NOTICE : Removing AutoResume Points ...
19 Sep 2019 06:39:51 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190919T031003Z
19 Sep 2019 06:39:51 UTC: NOTICE : --- Running action sequence: unpack
19 Sep 2019 06:39:51 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
19 Sep 2019 06:39:51 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
19 Sep 2019 06:39:51 UTC: NOTICE : Removing AutoResume Points ...
19 Sep 2019 06:39:51 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190919T031003Z
19 Sep 2019 06:39:51 UTC: NOTICE : Clearing the chroot path ...
19 Sep 2019 06:39:51 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/stage3-ia64-20190919T031003Z
19 Sep 2019 06:39:51 UTC: NOTICE : Starting rsync from /var/tmp/catalyst/tmp/default/stage1-ia64-20190919T031003Z/
19 Sep 2019 06:39:51 UTC: NOTICE : to /var/tmp/catalyst/tmp/default/stage3-ia64-20190919T031003Z (this may take some time) ..
19 Sep 2019 06:43:00 UTC: NOTICE : --- Running action sequence: unpack_snapshot
19 Sep 2019 06:43:00 UTC: NOTICE : --- Running action sequence: setup_confdir
19 Sep 2019 06:43:00 UTC: NOTICE : --- Running action sequence: portage_overlay
19 Sep 2019 06:43:00 UTC: NOTICE : --- Running action sequence: base_dirs
19 Sep 2019 06:43:00 UTC: NOTICE : --- Running action sequence: bind
19 Sep 2019 06:43:00 UTC: NOTICE : --- Running action sequence: chroot_setup
19 Sep 2019 06:43:00 UTC: NOTICE : Setting up chroot...
19 Sep 2019 06:43:00 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
19 Sep 2019 06:43:00 UTC: WARNING : If your build fails look here first as the possible problem.
19 Sep 2019 06:43:00 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
19 Sep 2019 06:43:00 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
19 Sep 2019 06:43:00 UTC: WARNING : You have been warned.
19 Sep 2019 06:43:01 UTC: NOTICE : Writing the stage make.conf to: /var/tmp/catalyst/tmp/default/stage3-ia64-20190919T031003Z/etc/portage/make.conf
19 Sep 2019 06:43:01 UTC: NOTICE : STICKY-CONFIG is enabled
19 Sep 2019 06:43:01 UTC: NOTICE : --- Running action sequence: setup_environment
19 Sep 2019 06:43:01 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190919T031003Z/tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190919T031003Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
chroot /var/tmp/catalyst/tmp/default/stage3-ia64-20190919T031003Z /tmp/stage3-chroot.sh
chroot: failed to run command './tmp/stage3-chroot.sh': No such file or directory
19 Sep 2019 06:43:01 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
19 Sep 2019 06:43:01 UTC: ERROR : CatalystError: Stage build aborting due to error.
19 Sep 2019 06:43:01 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1360, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
19 Sep 2019 06:43:01 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
19.01user 7.10system 3:10.63elapsed 13%CPU (0avgtext+0avgdata 28816maxresident)k
0inputs+0outputs (0major+20527minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190919T031003Z.RdIhLa/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2019-09-20 6:53 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2019-09-20 6:53 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage3.spec
20 Sep 2019 06:49:51 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
20 Sep 2019 06:49:51 UTC: NOTICE : conf_values[options] = {'seedcache', 'bindist', 'pkgcache', 'clear-autoresume', 'autoresume', 'kerncache', 'snapcache'}
20 Sep 2019 06:49:51 UTC: NOTICE : Processing spec file: stage3.spec
20 Sep 2019 06:49:52 UTC: NOTICE : Using target: stage3
20 Sep 2019 06:49:52 UTC: NOTICE : Source file specification matching setting is: strict
20 Sep 2019 06:49:52 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
20 Sep 2019 06:49:52 UTC: NOTICE : Source path set to /var/tmp/catalyst/tmp/default/stage1-ia64-20190920T031004Z/
20 Sep 2019 06:49:52 UTC: NOTICE : Removing AutoResume Points ...
20 Sep 2019 06:49:52 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190920T031004Z
20 Sep 2019 06:49:52 UTC: NOTICE : --- Running action sequence: unpack
20 Sep 2019 06:49:52 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
20 Sep 2019 06:49:52 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
20 Sep 2019 06:49:52 UTC: NOTICE : Removing AutoResume Points ...
20 Sep 2019 06:49:52 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190920T031004Z
20 Sep 2019 06:49:52 UTC: NOTICE : Clearing the chroot path ...
20 Sep 2019 06:49:52 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/stage3-ia64-20190920T031004Z
20 Sep 2019 06:49:52 UTC: NOTICE : Starting rsync from /var/tmp/catalyst/tmp/default/stage1-ia64-20190920T031004Z/
20 Sep 2019 06:49:52 UTC: NOTICE : to /var/tmp/catalyst/tmp/default/stage3-ia64-20190920T031004Z (this may take some time) ..
20 Sep 2019 06:53:33 UTC: NOTICE : --- Running action sequence: unpack_snapshot
20 Sep 2019 06:53:33 UTC: NOTICE : --- Running action sequence: setup_confdir
20 Sep 2019 06:53:34 UTC: NOTICE : --- Running action sequence: portage_overlay
20 Sep 2019 06:53:34 UTC: NOTICE : --- Running action sequence: base_dirs
20 Sep 2019 06:53:34 UTC: NOTICE : --- Running action sequence: bind
20 Sep 2019 06:53:34 UTC: NOTICE : --- Running action sequence: chroot_setup
20 Sep 2019 06:53:34 UTC: NOTICE : Setting up chroot...
20 Sep 2019 06:53:34 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
20 Sep 2019 06:53:34 UTC: WARNING : If your build fails look here first as the possible problem.
20 Sep 2019 06:53:34 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
20 Sep 2019 06:53:34 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
20 Sep 2019 06:53:34 UTC: WARNING : You have been warned.
20 Sep 2019 06:53:34 UTC: NOTICE : Writing the stage make.conf to: /var/tmp/catalyst/tmp/default/stage3-ia64-20190920T031004Z/etc/portage/make.conf
20 Sep 2019 06:53:34 UTC: NOTICE : STICKY-CONFIG is enabled
20 Sep 2019 06:53:34 UTC: NOTICE : --- Running action sequence: setup_environment
20 Sep 2019 06:53:34 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190920T031004Z/tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190920T031004Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
chroot /var/tmp/catalyst/tmp/default/stage3-ia64-20190920T031004Z /tmp/stage3-chroot.sh
chroot: failed to run command './tmp/stage3-chroot.sh': No such file or directory
20 Sep 2019 06:53:34 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
20 Sep 2019 06:53:34 UTC: ERROR : CatalystError: Stage build aborting due to error.
20 Sep 2019 06:53:34 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1360, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
20 Sep 2019 06:53:34 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
18.68user 6.93system 3:43.48elapsed 11%CPU (0avgtext+0avgdata 29024maxresident)k
0inputs+0outputs (0major+20615minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190920T031004Z.IZUAQf/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2019-09-21 6:48 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2019-09-21 6:48 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage3.spec
21 Sep 2019 06:45:38 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
21 Sep 2019 06:45:38 UTC: NOTICE : conf_values[options] = {'seedcache', 'clear-autoresume', 'pkgcache', 'snapcache', 'bindist', 'kerncache', 'autoresume'}
21 Sep 2019 06:45:38 UTC: NOTICE : Processing spec file: stage3.spec
21 Sep 2019 06:45:38 UTC: NOTICE : Using target: stage3
21 Sep 2019 06:45:38 UTC: NOTICE : Source file specification matching setting is: strict
21 Sep 2019 06:45:38 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
21 Sep 2019 06:45:38 UTC: NOTICE : Source path set to /var/tmp/catalyst/tmp/default/stage1-ia64-20190921T031005Z/
21 Sep 2019 06:45:38 UTC: NOTICE : Removing AutoResume Points ...
21 Sep 2019 06:45:38 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190921T031005Z
21 Sep 2019 06:45:38 UTC: NOTICE : --- Running action sequence: unpack
21 Sep 2019 06:45:38 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
21 Sep 2019 06:45:38 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
21 Sep 2019 06:45:38 UTC: NOTICE : Removing AutoResume Points ...
21 Sep 2019 06:45:38 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190921T031005Z
21 Sep 2019 06:45:38 UTC: NOTICE : Clearing the chroot path ...
21 Sep 2019 06:45:38 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/stage3-ia64-20190921T031005Z
21 Sep 2019 06:45:38 UTC: NOTICE : Starting rsync from /var/tmp/catalyst/tmp/default/stage1-ia64-20190921T031005Z/
21 Sep 2019 06:45:38 UTC: NOTICE : to /var/tmp/catalyst/tmp/default/stage3-ia64-20190921T031005Z (this may take some time) ..
21 Sep 2019 06:48:40 UTC: NOTICE : --- Running action sequence: unpack_snapshot
21 Sep 2019 06:48:40 UTC: NOTICE : --- Running action sequence: setup_confdir
21 Sep 2019 06:48:41 UTC: NOTICE : --- Running action sequence: portage_overlay
21 Sep 2019 06:48:41 UTC: NOTICE : --- Running action sequence: base_dirs
21 Sep 2019 06:48:41 UTC: NOTICE : --- Running action sequence: bind
21 Sep 2019 06:48:41 UTC: NOTICE : --- Running action sequence: chroot_setup
21 Sep 2019 06:48:41 UTC: NOTICE : Setting up chroot...
21 Sep 2019 06:48:41 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
21 Sep 2019 06:48:41 UTC: WARNING : If your build fails look here first as the possible problem.
21 Sep 2019 06:48:41 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
21 Sep 2019 06:48:41 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
21 Sep 2019 06:48:41 UTC: WARNING : You have been warned.
21 Sep 2019 06:48:41 UTC: NOTICE : Writing the stage make.conf to: /var/tmp/catalyst/tmp/default/stage3-ia64-20190921T031005Z/etc/portage/make.conf
21 Sep 2019 06:48:41 UTC: NOTICE : STICKY-CONFIG is enabled
21 Sep 2019 06:48:41 UTC: NOTICE : --- Running action sequence: setup_environment
21 Sep 2019 06:48:41 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190921T031005Z/tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190921T031005Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
chroot /var/tmp/catalyst/tmp/default/stage3-ia64-20190921T031005Z /tmp/stage3-chroot.sh
chroot: failed to run command './tmp/stage3-chroot.sh': No such file or directory
21 Sep 2019 06:48:41 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
21 Sep 2019 06:48:41 UTC: ERROR : CatalystError: Stage build aborting due to error.
21 Sep 2019 06:48:41 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1360, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
21 Sep 2019 06:48:41 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
19.94user 7.65system 3:03.67elapsed 15%CPU (0avgtext+0avgdata 29024maxresident)k
0inputs+0outputs (0major+20544minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190921T031005Z.FbPKgd/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2019-09-29 7:35 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2019-09-29 7:35 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage3.spec
29 Sep 2019 07:32:29 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
29 Sep 2019 07:32:29 UTC: NOTICE : conf_values[options] = {'seedcache', 'autoresume', 'clear-autoresume', 'snapcache', 'bindist', 'kerncache', 'pkgcache'}
29 Sep 2019 07:32:29 UTC: NOTICE : Processing spec file: stage3.spec
29 Sep 2019 07:32:29 UTC: NOTICE : Using target: stage3
29 Sep 2019 07:32:29 UTC: NOTICE : Source file specification matching setting is: strict
29 Sep 2019 07:32:29 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
29 Sep 2019 07:32:29 UTC: NOTICE : Source path set to /var/tmp/catalyst/tmp/default/stage1-ia64-20190929T031003Z/
29 Sep 2019 07:32:29 UTC: NOTICE : Removing AutoResume Points ...
29 Sep 2019 07:32:29 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190929T031003Z
29 Sep 2019 07:32:29 UTC: NOTICE : --- Running action sequence: unpack
29 Sep 2019 07:32:29 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
29 Sep 2019 07:32:29 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
29 Sep 2019 07:32:29 UTC: NOTICE : Removing AutoResume Points ...
29 Sep 2019 07:32:29 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190929T031003Z
29 Sep 2019 07:32:29 UTC: NOTICE : Clearing the chroot path ...
29 Sep 2019 07:32:29 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/stage3-ia64-20190929T031003Z
29 Sep 2019 07:32:29 UTC: NOTICE : Starting rsync from /var/tmp/catalyst/tmp/default/stage1-ia64-20190929T031003Z/
29 Sep 2019 07:32:29 UTC: NOTICE : to /var/tmp/catalyst/tmp/default/stage3-ia64-20190929T031003Z (this may take some time) ..
29 Sep 2019 07:35:03 UTC: NOTICE : --- Running action sequence: unpack_snapshot
29 Sep 2019 07:35:03 UTC: NOTICE : --- Running action sequence: setup_confdir
29 Sep 2019 07:35:03 UTC: NOTICE : --- Running action sequence: portage_overlay
29 Sep 2019 07:35:03 UTC: NOTICE : --- Running action sequence: base_dirs
29 Sep 2019 07:35:03 UTC: NOTICE : --- Running action sequence: bind
29 Sep 2019 07:35:03 UTC: NOTICE : --- Running action sequence: chroot_setup
29 Sep 2019 07:35:03 UTC: NOTICE : Setting up chroot...
29 Sep 2019 07:35:03 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
29 Sep 2019 07:35:03 UTC: WARNING : If your build fails look here first as the possible problem.
29 Sep 2019 07:35:03 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
29 Sep 2019 07:35:03 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
29 Sep 2019 07:35:03 UTC: WARNING : You have been warned.
29 Sep 2019 07:35:04 UTC: NOTICE : Writing the stage make.conf to: /var/tmp/catalyst/tmp/default/stage3-ia64-20190929T031003Z/etc/portage/make.conf
29 Sep 2019 07:35:04 UTC: NOTICE : STICKY-CONFIG is enabled
29 Sep 2019 07:35:04 UTC: NOTICE : --- Running action sequence: setup_environment
29 Sep 2019 07:35:04 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190929T031003Z/tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190929T031003Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
chroot /var/tmp/catalyst/tmp/default/stage3-ia64-20190929T031003Z /tmp/stage3-chroot.sh
chroot: failed to run command './tmp/stage3-chroot.sh': No such file or directory
29 Sep 2019 07:35:04 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
29 Sep 2019 07:35:04 UTC: ERROR : CatalystError: Stage build aborting due to error.
29 Sep 2019 07:35:04 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1360, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
29 Sep 2019 07:35:04 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
19.21user 7.18system 2:35.76elapsed 16%CPU (0avgtext+0avgdata 30400maxresident)k
0inputs+0outputs (0major+20489minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190929T031003Z.zdbGPR/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
* [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec
@ 2019-09-30 7:20 catalyst
0 siblings, 0 replies; 41+ messages in thread
From: catalyst @ 2019-09-30 7:20 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f stage3.spec
30 Sep 2019 07:18:26 UTC: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
30 Sep 2019 07:18:26 UTC: NOTICE : conf_values[options] = {'autoresume', 'bindist', 'clear-autoresume', 'pkgcache', 'snapcache', 'kerncache', 'seedcache'}
30 Sep 2019 07:18:26 UTC: NOTICE : Processing spec file: stage3.spec
30 Sep 2019 07:18:26 UTC: NOTICE : Using target: stage3
30 Sep 2019 07:18:26 UTC: NOTICE : Source file specification matching setting is: strict
30 Sep 2019 07:18:26 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
30 Sep 2019 07:18:26 UTC: NOTICE : Source path set to /var/tmp/catalyst/tmp/default/stage1-ia64-20190930T031005Z/
30 Sep 2019 07:18:26 UTC: NOTICE : Removing AutoResume Points ...
30 Sep 2019 07:18:26 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190930T031005Z
30 Sep 2019 07:18:26 UTC: NOTICE : --- Running action sequence: unpack
30 Sep 2019 07:18:26 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
30 Sep 2019 07:18:26 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
30 Sep 2019 07:18:26 UTC: NOTICE : Removing AutoResume Points ...
30 Sep 2019 07:18:26 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/.autoresume-stage3-ia64-20190930T031005Z
30 Sep 2019 07:18:26 UTC: NOTICE : Clearing the chroot path ...
30 Sep 2019 07:18:26 UTC: NOTICE : Emptying directory: /var/tmp/catalyst/tmp/default/stage3-ia64-20190930T031005Z
30 Sep 2019 07:18:26 UTC: NOTICE : Starting rsync from /var/tmp/catalyst/tmp/default/stage1-ia64-20190930T031005Z/
30 Sep 2019 07:18:26 UTC: NOTICE : to /var/tmp/catalyst/tmp/default/stage3-ia64-20190930T031005Z (this may take some time) ..
30 Sep 2019 07:20:54 UTC: NOTICE : --- Running action sequence: unpack_snapshot
30 Sep 2019 07:20:54 UTC: NOTICE : --- Running action sequence: setup_confdir
30 Sep 2019 07:20:54 UTC: NOTICE : --- Running action sequence: portage_overlay
30 Sep 2019 07:20:54 UTC: NOTICE : --- Running action sequence: base_dirs
30 Sep 2019 07:20:54 UTC: NOTICE : --- Running action sequence: bind
30 Sep 2019 07:20:54 UTC: NOTICE : --- Running action sequence: chroot_setup
30 Sep 2019 07:20:54 UTC: NOTICE : Setting up chroot...
30 Sep 2019 07:20:54 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
30 Sep 2019 07:20:54 UTC: WARNING : If your build fails look here first as the possible problem.
30 Sep 2019 07:20:54 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
30 Sep 2019 07:20:54 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
30 Sep 2019 07:20:54 UTC: WARNING : You have been warned.
30 Sep 2019 07:20:55 UTC: NOTICE : Writing the stage make.conf to: /var/tmp/catalyst/tmp/default/stage3-ia64-20190930T031005Z/etc/portage/make.conf
30 Sep 2019 07:20:55 UTC: NOTICE : STICKY-CONFIG is enabled
30 Sep 2019 07:20:55 UTC: NOTICE : --- Running action sequence: setup_environment
30 Sep 2019 07:20:55 UTC: NOTICE : --- Running action sequence: run_local
clist_shdir = /usr/share/catalyst/targets
clst_target = stage3
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190930T031005Z/tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage3-ia64-20190930T031005Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
chroot /var/tmp/catalyst/tmp/default/stage3-ia64-20190930T031005Z /tmp/stage3-chroot.sh
chroot: failed to run command './tmp/stage3-chroot.sh': No such file or directory
30 Sep 2019 07:20:55 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
30 Sep 2019 07:20:55 UTC: ERROR : CatalystError: Stage build aborting due to error.
30 Sep 2019 07:20:55 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1360, in run_local
env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
30 Sep 2019 07:20:55 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
18.86user 7.03system 2:29.06elapsed 17%CPU (0avgtext+0avgdata 29456maxresident)k
0inputs+0outputs (0major+20488minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190930T031005Z.pPn3su/log/stage3.log
^ permalink raw reply [flat|nested] 41+ messages in thread
end of thread, other threads:[~2019-09-30 7:14 UTC | newest]
Thread overview: 41+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-02-14 9:21 [gentoo-releng-autobuilds] [ia64-auto] Catalyst fatal build error - stage3.spec catalyst
-- strict thread matches above, loose matches on Subject: below --
2019-09-30 7:20 catalyst
2019-09-29 7:35 catalyst
2019-09-21 6:48 catalyst
2019-09-20 6:53 catalyst
2019-09-19 6:43 catalyst
2019-09-18 6:47 catalyst
2019-09-17 6:52 catalyst
2019-09-16 7:39 catalyst
2019-09-15 6:52 catalyst
2019-09-14 6:48 catalyst
2019-09-13 6:46 catalyst
2019-09-13 1:27 catalyst
2019-09-12 6:51 catalyst
2019-09-11 6:52 catalyst
2019-09-10 6:48 catalyst
2019-09-09 7:15 catalyst
2019-09-08 6:52 catalyst
2019-09-07 6:49 catalyst
2019-09-06 6:47 catalyst
2018-05-22 13:11 catalyst
2018-02-19 9:47 catalyst
2018-02-18 10:50 catalyst
2018-02-17 9:38 catalyst
2018-02-16 9:23 catalyst
2018-02-15 9:22 catalyst
2018-02-13 9:36 catalyst
2018-02-12 9:22 catalyst
2018-01-30 7:21 catalyst
2018-01-29 12:57 catalyst
2018-01-28 13:11 catalyst
2016-02-23 13:33 catalyst
2016-02-16 12:59 catalyst
2016-02-09 13:05 catalyst
2016-02-02 13:01 catalyst
2016-01-26 12:48 catalyst
2016-01-12 12:19 catalyst
2015-02-24 7:28 catalyst
2013-08-28 1:09 catalyst
2012-07-17 15:11 catalyst
2011-05-17 18:58 catalyst
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox