public inbox for gentoo-releng-autobuilds@lists.gentoo.org
 help / color / mirror / Atom feed
From: catalyst@nightheron.gentoo.org
To: releng@gentoo.org,gentoo-releng-autobuilds@lists.gentoo.org
Subject: [gentoo-releng-autobuilds] [amd64-auto] Catalyst non-fatal build error - stage4-minimal.spec
Date: Wed,  3 Jan 2018 22:13:41 +0000 (UTC)	[thread overview]
Message-ID: <20180103221341.12890201D0@nightheron.gentoo.org> (raw)




29 Dec 2017 00:49:40 UTC: NOTICE  : Emptying directory: /release/buildroot/amd64-dev/tmp/default/.autoresume-stage4-amd64-minimal-20171228T214501Z
29 Dec 2017 00:49:40 UTC: NOTICE  : Clearing the chroot path ...
29 Dec 2017 00:49:40 UTC: NOTICE  : Emptying directory: /release/buildroot/amd64-dev/tmp/default/stage4-amd64-minimal-20171228T214501Z
29 Dec 2017 00:49:40 UTC: NOTICE  : Starting auto from /release/buildroot/amd64-dev/builds/default/stage3-amd64-latest.tar.xz
29 Dec 2017 00:49:40 UTC: NOTICE  : to /release/buildroot/amd64-dev/tmp/default/stage4-amd64-minimal-20171228T214501Z (this may take some time) ..
29 Dec 2017 00:49:45 UTC: NOTICE  : --- Running action sequence: unpack_snapshot
29 Dec 2017 00:49:45 UTC: NOTICE  : --- Running action sequence: config_profile_link
29 Dec 2017 00:49:45 UTC: NOTICE  : --- Running action sequence: setup_confdir
29 Dec 2017 00:49:45 UTC: NOTICE  : --- Running action sequence: portage_overlay
29 Dec 2017 00:49:45 UTC: NOTICE  : --- Running action sequence: bind
29 Dec 2017 00:49:45 UTC: NOTICE  : --- Running action sequence: chroot_setup
29 Dec 2017 00:49:45 UTC: NOTICE  : Setting up chroot...
29 Dec 2017 00:49:45 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
29 Dec 2017 00:49:45 UTC: WARNING : If your build fails look here first as the possible problem.
29 Dec 2017 00:49:45 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
29 Dec 2017 00:49:45 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
29 Dec 2017 00:49:45 UTC: WARNING : You have been warned.
29 Dec 2017 00:49:45 UTC: NOTICE  : Writing the stage make.conf to: /release/buildroot/amd64-dev/tmp/default/stage4-amd64-minimal-20171228T214501Z/etc/portage/make.conf
29 Dec 2017 00:49:45 UTC: NOTICE  : STICKY-CONFIG is enabled
29 Dec 2017 00:49:45 UTC: NOTICE  : --- Running action sequence: setup_environment
29 Dec 2017 00:49:45 UTC: NOTICE  : --- Running action sequence: build_packages
Copying stage4-chroot.sh to /tmp
copying stage4-chroot.sh to /release/buildroot/amd64-dev/tmp/default/stage4-amd64-minimal-20171228T214501Z/tmp
copying chroot-functions.sh to /release/buildroot/amd64-dev/tmp/default/stage4-amd64-minimal-20171228T214501Z/tmp
Ensure the file has the executable bit set
Running stage4-chroot.sh in chroot:
    chroot /release/buildroot/amd64-dev/tmp/default/stage4-amd64-minimal-20171228T214501Z /tmp/stage4-chroot.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
Bringing system up to date using profile specific use flags
emerge --quiet --usepkg --buildpkg --newuse -u @system
Emerging packages using stage4 use flags
emerge --quiet --usepkg --buildpkg --newuse app-admin/sudo net-misc/dhcp net-misc/iputils sys-boot/grub sys-apps/gptfdisk sys-apps/iproute2 sys-apps/lsb-release sys-devel/bc sys-power/acpid
>>> Running pre-merge checks for sys-power/acpid-2.0.28
 * Determining the location of the kernel source code
 * Unable to find kernel sources at /usr/src/linux
 * Please make sure that /usr/src/linux points at your running kernel, 
 * (or the kernel you wish to build against).
 * Alternatively, set the KERNEL_DIR environment variable to the kernel sources location
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Checking for suitable kernel configuration options...
 [ ok ]
>>> Emerging binary (1 of 20) dev-libs/libunistring-0.9.7::gentoo
>>> Installing (1 of 20) dev-libs/libunistring-0.9.7::gentoo
>>> Emerging binary (2 of 20) dev-libs/libtasn1-4.12-r1::gentoo
>>> Emerging binary (3 of 20) sys-apps/lsb-release-1.4::gentoo
>>> Emerging binary (4 of 20) sys-power/acpid-2.0.28::gentoo
>>> Emerging binary (5 of 20) sys-libs/efivar-31::gentoo
>>> Installing (2 of 20) dev-libs/libtasn1-4.12-r1::gentoo
>>> Emerging binary (6 of 20) dev-libs/nettle-3.3-r2::gentoo
>>> Installing (3 of 20) sys-apps/lsb-release-1.4::gentoo
>>> Emerging binary (7 of 20) net-dns/libidn2-2.0.4::gentoo
>>> Recording sys-apps/lsb-release in "world" favorites file...
>>> Installing (4 of 20) sys-power/acpid-2.0.28::gentoo
>>> Emerging binary (8 of 20) app-admin/metalog-3-r2::gentoo
>>> Recording sys-power/acpid in "world" favorites file...
>>> Installing (5 of 20) sys-libs/efivar-31::gentoo
>>> Emerging binary (9 of 20) virtual/libudev-232::gentoo
>>> Emerging binary (10 of 20) net-misc/dhcp-4.3.5::gentoo
>>> Installing (6 of 20) dev-libs/nettle-3.3-r2::gentoo
>>> Emerging binary (11 of 20) sys-apps/gptfdisk-1.0.1::gentoo
>>> Installing (7 of 20) net-dns/libidn2-2.0.4::gentoo
>>> Emerging binary (12 of 20) sys-devel/bc-1.06.95-r1::gentoo
>>> Installing (8 of 20) app-admin/metalog-3-r2::gentoo
>>> Emerging binary (13 of 20) net-libs/gnutls-3.5.15::gentoo
>>> Installing (9 of 20) virtual/libudev-232::gentoo
>>> Emerging binary (14 of 20) virtual/logger-0::gentoo
>>> Installing (10 of 20) net-misc/dhcp-4.3.5::gentoo
>>> Emerging binary (15 of 20) sys-apps/pciutils-3.4.1::gentoo
>>> Recording net-misc/dhcp in "world" favorites file...
>>> Installing (11 of 20) sys-apps/gptfdisk-1.0.1::gentoo
>>> Recording sys-apps/gptfdisk in "world" favorites file...
>>> Installing (12 of 20) sys-devel/bc-1.06.95-r1::gentoo
>>> Recording sys-devel/bc in "world" favorites file...
>>> Installing (13 of 20) net-libs/gnutls-3.5.15::gentoo
>>> Installing (14 of 20) virtual/logger-0::gentoo
>>> Installing (15 of 20) sys-apps/pciutils-3.4.1::gentoo
>>> Emerging binary (16 of 20) mail-mta/nullmailer-2.0-r1::gentoo
>>> Emerging binary (17 of 20) sys-boot/efibootmgr-15::gentoo
>>> Installing (16 of 20) mail-mta/nullmailer-2.0-r1::gentoo
>>> Installing (17 of 20) sys-boot/efibootmgr-15::gentoo
>>> Emerging binary (18 of 20) virtual/mta-1::gentoo
>>> Emerging binary (19 of 20) sys-boot/grub-2.02::gentoo
>>> Installing (18 of 20) virtual/mta-1::gentoo
>>> Installing (19 of 20) sys-boot/grub-2.02::gentoo
>>> Emerging binary (20 of 20) app-admin/sudo-1.8.20_p2::gentoo
>>> Recording sys-boot/grub in "world" favorites file...
>>> Installing (20 of 20) app-admin/sudo-1.8.20_p2::gentoo
>>> Recording app-admin/sudo in "world" favorites file...
 * Messages for package sys-power/acpid-2.0.28:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Messages for package sys-power/acpid-2.0.28:
 * 
 * You may wish to read the Gentoo Linux Power Management Guide,
 * which can be found online at:
 * https://wiki.gentoo.org/wiki/Power_management/Guide
 * 
 * You should reboot the system now to get /run mounted with tmpfs!
 * Messages for package mail-mta/nullmailer-2.0-r1:
 * To create an initial setup, please do:
 * emerge --config =mail-mta/nullmailer-2.0-r1
 * Messages for package sys-boot/grub-2.02:
 * For information on how to configure GRUB2 please refer to the guide:
 *     https://wiki.gentoo.org/wiki/GRUB2_Quick_Start
 * 
 * You may consider installing the following optional packages:
 *   sys-boot/os-prober for Detect other operating systems (grub-mkconfig)
 *   dev-libs/libisoburn for Create rescue media (grub-mkrescue)
 *   sys-fs/mdadm for Enable RAID device detection
 * Messages for package app-admin/sudo-1.8.20_p2:
 * To use the -A (askpass) option, you need to install a compatible
 * password program from the following list. Starred packages will
 * automatically register for the use with sudo (but will not force
 * the -A option):
 * 
 *  [*] net-misc/ssh-askpass-fullscreen
 *      net-misc/x11-ssh-askpass
 * 
 * You can override the choice by setting the SUDO_ASKPASS environmnent
 * variable to the program you want to use.










removing /release/buildroot/amd64-dev/tmp/default/stage4-amd64-minimal-20171228T214501Z/tmp/stage4-chroot.sh from the chroot
removing /release/buildroot/amd64-dev/tmp/default/stage4-amd64-minimal-20171228T214501Z/tmp/chroot-functions.sh from the chroot
29 Dec 2017 00:51:25 UTC: NOTICE  : --- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /release/buildroot/amd64-dev/tmp/default/stage4-amd64-minimal-20171228T214501Z/tmp
copying chroot-functions.sh to /release/buildroot/amd64-dev/tmp/default/stage4-amd64-minimal-20171228T214501Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
    chroot /release/buildroot/amd64-dev/tmp/default/stage4-amd64-minimal-20171228T214501Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/genkernel-3.4.52.4-r2
>>> Emerging binary (1 of 2) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 2) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 2) sys-kernel/genkernel-3.4.52.4-r2::gentoo
>>> Installing (2 of 2) sys-kernel/genkernel-3.4.52.4-r2::gentoo
 * Messages for package sys-kernel/genkernel-3.4.52.4-r2:
 * Documentation is available in the genkernel manual page
 * as well as the following URL:
 * https://wiki.gentoo.org/wiki/Genkernel
 * This package is known to not work with reiser4.  If you are running
 * reiser4 and have a problem, do not file a bug.  We know it does not
 * work and we don't plan on fixing it since reiser4 is the one that is
 * broken in this regard.  Try using a sane filesystem like ext4.
 * The LUKS support has changed from versions prior to 3.4.4.  Now,
 * you use crypt_root=/dev/blah instead of real_root=luks:/dev/blah.


removing /release/buildroot/amd64-dev/tmp/default/stage4-amd64-minimal-20171228T214501Z/tmp/pre-kmerge.sh from the chroot
removing /release/buildroot/amd64-dev/tmp/default/stage4-amd64-minimal-20171228T214501Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /release/buildroot/amd64-dev/tmp/default/stage4-amd64-minimal-20171228T214501Z/tmp
copying chroot-functions.sh to /release/buildroot/amd64-dev/tmp/default/stage4-amd64-minimal-20171228T214501Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
    chroot /release/buildroot/amd64-dev/tmp/default/stage4-amd64-minimal-20171228T214501Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
Genkernel version 3.4.52.4 found ... OK
emerge --quiet --usepkg --buildpkg --newuse gentoo-sources
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-kernel/gentoo-sources-4.14.8-r1::gentoo
>>> Installing (1 of 1) sys-kernel/gentoo-sources-4.14.8-r1::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
 * Messages for package sys-kernel/gentoo-sources-4.14.8-r1:
 * If you are upgrading from a previous kernel, you may be interested
 * in the following document:
 *   - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade


Adjusting /usr/src/linux to point to /usr/src/linux-4.14.8-gentoo-r1
Setting extraversion to openstack
^[[32;01m*^[[32;01m Gentoo Linux Genkernel; Version 3.4.52.4^[[0m
^[[32;01m*^[[0m Running with options: --all-ramdisk-modules --cachedir=/tmp/kerncache/gentoo-genkernel_cache-minimal-20171228T214501Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-minimal-20171228T214501Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-minimal-20171228T214501Z.tar.bz2 all --kernel-config=/var/tmp/gentoo.config

^[[32;01m*^[[0m Using genkernel.conf from /etc/genkernel.conf
^[[32;01m*^[[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh ..
^[[32;01m*^[[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load ..

^[[32;01m*^[[0;01m Linux Kernel ^[[0;01m4.14.8-gentoo-r1-openstack^[[0m for ^[[0;01mx86_64^[[0m...
^[[32;01m*^[[0m .. with config file /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: Using config from /var/tmp/gentoo.config
^[[32;01m*^[[0m kernel: >> Running mrproper...
^[[32;01m*^[[0m         >> Running oldconfig...
^[[32;01m*^[[0m kernel: >> Cleaning...
^[[32;01m*^[[0m         >> Compiling 4.14.8-gentoo-r1-openstack bzImage...

Command exited with non-zero status 1
94.31user 34.80system 141:24:02elapsed 0%CPU (0avgtext+0avgdata 1379936maxresident)k
81032inputs+2269104outputs (6major+3931582minor)pagefaults 0swaps



Full build log at /release/tmp/run/catalyst-auto.20171228T214501Z.EdJKmo/log/stage4-minimal.log


             reply	other threads:[~2018-01-03 22:13 UTC|newest]

Thread overview: 77+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-03 22:13 catalyst [this message]
  -- strict thread matches above, loose matches on Subject: below --
2020-09-28  3:00 [gentoo-releng-autobuilds] [amd64-auto] Catalyst non-fatal build error - stage4-minimal.spec catalyst
2020-09-21  3:00 catalyst
2020-09-14  3:00 catalyst
2020-09-07  3:00 catalyst
2020-08-31  3:00 catalyst
2020-08-24  3:00 catalyst
2020-08-17  3:00 catalyst
2020-08-10  3:01 catalyst
2020-08-03  3:00 catalyst
2020-07-27  3:00 catalyst
2020-07-20  3:00 catalyst
2020-07-13  3:00 catalyst
2020-07-06  3:00 catalyst
2020-06-29 15:22 catalyst
2020-06-29  3:00 catalyst
2020-06-28 23:08 catalyst
2020-06-22  3:00 catalyst
2020-06-17 22:11 catalyst
2020-06-15  3:00 catalyst
2020-06-14 22:13 catalyst
2020-06-08  3:00 catalyst
2020-06-01  3:00 catalyst
2020-05-25  3:00 catalyst
2020-05-18  3:00 catalyst
2020-05-11 22:35 catalyst
2020-05-11 16:26 catalyst
2020-05-11 11:31 catalyst
2020-05-11  3:01 catalyst
2020-05-04  3:12 catalyst
2020-04-27  3:00 catalyst
2020-04-13  4:00 catalyst
2020-04-06  3:58 catalyst
2020-03-30  3:59 catalyst
2020-03-23  3:57 catalyst
2020-03-16  3:56 catalyst
2020-03-09  3:57 catalyst
2020-03-02  3:54 catalyst
2020-02-24  3:43 catalyst
2020-02-17  3:42 catalyst
2020-02-10  3:37 catalyst
2020-02-03  3:38 catalyst
2020-01-27  3:38 catalyst
2020-01-20  3:39 catalyst
2020-01-13  3:39 catalyst
2019-07-16  3:04 catalyst
2019-07-16  3:00 catalyst
2019-07-16  2:55 catalyst
2019-07-16  2:51 catalyst
2019-05-31 11:23 catalyst
2019-05-30 11:25 catalyst
2019-05-30  2:20 catalyst
2019-05-29 12:29 catalyst
2019-05-27  5:52 catalyst
2018-08-14 16:27 catalyst
2018-08-11  9:51 catalyst
2018-08-11  9:48 catalyst
2018-07-17 11:05 catalyst
2018-07-16 22:32 catalyst
2018-07-04  2:15 catalyst
2018-07-02  5:54 catalyst
2018-06-28  1:18 catalyst
2018-06-25  6:29 catalyst
2018-06-25  3:21 catalyst
2018-06-18  2:36 catalyst
2018-06-15 22:16 catalyst
2018-05-30  2:37 catalyst
2018-02-03 13:57 catalyst
2018-01-05  1:42 catalyst
2018-01-04  7:11 catalyst
2017-12-26 21:58 catalyst
2017-12-24 21:59 catalyst
2017-12-23  3:45 catalyst
2017-12-21 21:58 catalyst
2017-12-19 21:54 catalyst
2017-12-17 22:45 catalyst
2017-12-15  7:26 catalyst

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180103221341.12890201D0@nightheron.gentoo.org \
    --to=catalyst@nightheron.gentoo.org \
    --cc=gentoo-releng-autobuilds@lists.gentoo.org \
    --cc=releng@gentoo.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox