* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - stage3.spec
@ 2011-05-10 9:04 catalyst
0 siblings, 0 replies; 25+ messages in thread
From: catalyst @ 2011-05-10 9:04 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Installing (113 of 135) sys-devel/automake-1.11.1
>>> Emerging (114 of 135) sys-apps/groff-1.21
>>> Installing (114 of 135) sys-apps/groff-1.21
>>> Emerging (115 of 135) sys-apps/man-1.6f-r4
>>> Failed to emerge sys-apps/man-1.6f-r4, Log file:
>>> '/var/tmp/portage/sys-apps/man-1.6f-r4/temp/build.log'
* Package: sys-apps/man-1.6f-r4
* Repository: gentoo
* Maintainer: base-system@gentoo.org
* USE: elibc_glibc kernel_linux nls userland_GNU x86
* FEATURES: sandbox
* Adding group 'man' to your system ...
* - Groupid: 15
/usr/portage/eclass/eutils.eclass: line 860: groupadd: command not found
* ERROR: sys-apps/man-1.6f-r4 failed (setup phase):
* enewgroup failed
*
* Call stack:
* ebuild.sh, line 56: Called pkg_setup
* man-1.6f-r4.ebuild, line 24: Called enewgroup 'man' '15'
* eutils.eclass, line 860: Called die
* The specific snippet of code:
* groupadd -r ${opts} ${egroup} || die "enewgroup failed"
*
* If you need support, post the output of 'emerge --info =sys-apps/man-1.6f-r4',
* the complete build log and the output of 'emerge -pqv =sys-apps/man-1.6f-r4'.
* The complete build log is located at '/var/tmp/portage/sys-apps/man-1.6f-r4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/man-1.6f-r4/temp/die.env'.
* S: '/var/tmp/portage/sys-apps/man-1.6f-r4/work/man-1.6f'
* Messages for package sys-libs/timezone-data-2011e:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package app-portage/portage-utils-0.3.1:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package sys-libs/glibc-2.11.3:
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-libs/gdbm-1.8.3-r4:
* 32bit systems might have to rebuild all gdbm databases due to
* LFS changes in the gdbm format. You can either delete the db
* and regenerate it from scratch, or use the converter:
* http://bugs.gentoo.org/attachment.cgi?id=215326
*
* See this comment for information on how to use it:
* http://bugs.gentoo.org/299390#c15
*
* You should be able to locate most gdbm db's on your system with:
* find /etc /var -type f -exec file {} + | grep 'GNU dbm 1.x or ndbm database'
*
* You could also try using this helper script:
* http://bugs.gentoo.org/attachment.cgi?id=222581
* Messages for package sys-fs/udev-151-r4:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* CONFIG_SYSFS_DEPRECATED: should not be set. But it is.
* CONFIG_SYSFS_DEPRECATED_V2: should not be set. But it is.
* Please check to make sure these options are set correctly.
* Failure to do so may cause unexpected problems.
*
* udev-151 does not support Linux kernel before version 2.6.25!
* For a reliable udev, use at least kernel 2.6.27
*
* You need to add the udev init script to the runlevel sysinit,
* else your system will not be able to boot
* after updating to >=openrc-0.4.0
* Run this to enable udev for >=openrc-0.4.0:
* rc-update add udev sysinit
*
* Auto-adding 'udev-postmount' service to your default runlevel
*
* If after the udev update removable devices or CD/DVD drives
* stop working, try re-emerging HAL before filling a bug report
*
* persistent-net does assigning fixed names to network devices.
* If you have problems with the persistent-net rules,
* just delete the rules file
* rm /etc/udev/rules.d/70-persistent-net.rules
* and then reboot.
*
* This may however number your devices in a different way than they are now.
*
* If you build an initramfs including udev, then please
* make sure that the /sbin/udevadm binary gets included,
* and your scripts changed to use it,as it replaces the
* old helper apps udevinfo, udevtrigger, ...
*
* mount options for directory /dev are no longer
* set in /etc/udev/udev.conf, but in /etc/fstab
* as for other directories.
*
* This version of udev no longer has devfs-compat enabled
* If you use /dev/md/*, /dev/loop/* or /dev/rd/*,
* then please migrate over to using the device names
* /dev/md*, /dev/loop* and /dev/ram*.
* The devfs-compat rules will be removed on the next udev update.
* For reference see Bug #269359.
*
* This version of udev no longer has use flag old-hd-rules enabled
* So all special rules for /dev/hd* devices are missing
* Please migrate to the new libata if you need these rules.
* They will be completely removed on the next udev update.
*
* For more information on udev on Gentoo, writing udev rules, and
* fixing known issues visit:
* http://www.gentoo.org/doc/en/udev-guide.xml
* Messages for package sys-apps/portage-2.1.9.42:
* If you are an ebuild developer and you plan to commit ebuilds
* with this system then please install dev-python/pycrypto or
* enable the ssl USE flag for >=dev-lang/python-2.6 in order
* to enable RMD160 hash support.
* See bug #198398 for more information.
* Messages for package app-misc/ca-certificates-20090709:
* You should run update-ca-certificates manually after etc-update
* Messages for package dev-vcs/git-1.7.3.4-r1:
* These additional scripts need some dependencies:
* git-quiltimport : dev-util/quilt
* git-instaweb : || ( www-servers/lighttpd www-servers/apache )
* Messages for package sys-apps/coreutils-8.7:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package net-misc/wget-1.12-r3:
* The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
* Messages for package sys-fs/e2fsprogs-1.41.12:
* No /etc/mtab file, creating one temporarily
* Messages for package sys-apps/man-1.6f-r4:
* ERROR: sys-apps/man-1.6f-r4 failed (setup phase):
* enewgroup failed
*
* Call stack:
* ebuild.sh, line 56: Called pkg_setup
* man-1.6f-r4.ebuild, line 24: Called enewgroup 'man' '15'
* eutils.eclass, line 860: Called die
* The specific snippet of code:
* groupadd -r ${opts} ${egroup} || die "enewgroup failed"
*
* If you need support, post the output of 'emerge --info =sys-apps/man-1.6f-r4',
* the complete build log and the output of 'emerge -pqv =sys-apps/man-1.6f-r4'.
* The complete build log is located at '/var/tmp/portage/sys-apps/man-1.6f-r4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/man-1.6f-r4/temp/die.env'.
* S: '/var/tmp/portage/sys-apps/man-1.6f-r4/work/man-1.6f'
* Regenerating GNU info directory index...
* Processed 74 info files.
* IMPORTANT: 2 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1207, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1212, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/default/stage3-i486-20110510/.catalyst_lock'
Full build log at /tmp/catalyst-auto.4221/log/stage3.log
^ permalink raw reply [flat|nested] 25+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - stage3.spec
@ 2011-12-20 9:06 catalyst
0 siblings, 0 replies; 25+ messages in thread
From: catalyst @ 2011-12-20 9:06 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
THIS PACKAGE SEEMS TO BE INCOMPLETE.
You have the option of continuing the configuration process, despite the
distinct possibility that your kit is damaged, by typing 'y'es. If you
do, don't blame me if something goes wrong. I advise you to type 'n'o
and contact the author (perlbug@perl.org).
Continue? [n] ABORTING...
* ERROR: dev-lang/perl-5.12.4-r1 failed (configure phase):
* Unable to configure
*
* Call stack:
* ebuild.sh, line 75: Called src_configure
* environment, line 2697: Called die
* The specific snippet of code:
* sh Configure -des -Duseshrplib -Darchname="${myarch}" -Dcc="$(tc-getCC)" -Doptimize="${CFLAGS}" -Dldflags="${LDFLAGS}" -Dprefix='/usr' -Dsiteprefix='/usr' -Dvendorprefix='/usr' -Dscriptdir='/usr/bin' -Dprivlib="${PRIV_LIB}" -Darchlib="${ARCH_LIB}" -Dsitelib="${SITE_LIB}" -Dsitearch="${SITE_ARCH}" -Dvendorlib="${VENDOR_LIB}" -Dvendorarch="${VENDOR_ARCH}" -Dman1dir=/usr/share/man/man1 -Dman3dir=/usr/share/man/man3 -Dsiteman1dir=/usr/share/man/man1 -Dsiteman3dir=/usr/share/man/man3 -Dvendorman1dir=/usr/share/man/man1 -Dvendorman3dir=/usr/share/man/man3 -Dman1ext='1' -Dman3ext='3pm' -Dlibperl="${LIBPERL}" -Dlocincpth=' ' -Duselargefiles -Dd_semctl_semun -Dcf_by='Gentoo' -Dmyhostname='localhost' -Dperladmin='root@localhost' -Dinstallusrbinperl='n' -Ud_csh -Uusenm "${myconf[@]}" || die "Unable to configure"
*
* If you need support, post the output of 'emerge --info =dev-lang/perl-5.12.4-r1',
* the complete build log and the output of 'emerge -pqv =dev-lang/perl-5.12.4-r1'.
* The complete build log is located at '/var/tmp/portage/dev-lang/perl-5.12.4-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/perl-5.12.4-r1/temp/environment'.
* S: '/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4'
* Messages for package sys-libs/timezone-data-2011l:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package app-portage/portage-utils-0.3.1:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package sys-libs/glibc-2.13-r4:
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-fs/udev-164-r2:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* udev-164 does not support Linux kernel before version 2.6.25!
* For a reliable udev, use at least kernel 2.6.27
*
* If after the udev update removable devices or CD/DVD drives
* stop working, try re-emerging HAL before filling a bug report
*
* persistent-net does assigning fixed names to network devices.
* If you have problems with the persistent-net rules,
* just delete the rules file
* rm /etc/udev/rules.d/70-persistent-net.rules
* and then reboot.
*
* This may however number your devices in a different way than they are now.
*
* If you build an initramfs including udev, then please
* make sure that the /sbin/udevadm binary gets included,
* and your scripts changed to use it,as it replaces the
* old helper apps udevinfo, udevtrigger, ...
*
* mount options for directory /dev are no longer
* set in /etc/udev/udev.conf, but in /etc/fstab
* as for other directories.
*
* If you use /dev/md/*, /dev/loop/* or /dev/rd/*,
* then please migrate over to using the device names
* /dev/md*, /dev/loop* and /dev/ram*.
* The devfs-compat rules have been removed.
* For reference see Bug #269359.
*
* Rules for /dev/hd* devices have been removed
* Please migrate to libata.
*
* For more information on udev on Gentoo, writing udev rules, and
* fixing known issues visit:
* http://www.gentoo.org/doc/en/udev-guide.xml
* Messages for package sys-libs/gdbm-1.8.3-r4:
* 32bit systems might have to rebuild all gdbm databases due to
* LFS changes in the gdbm format. You can either delete the db
* and regenerate it from scratch, or use the converter:
* http://bugs.gentoo.org/attachment.cgi?id=215326
*
* See this comment for information on how to use it:
* http://bugs.gentoo.org/299390#c15
*
* You should be able to locate most gdbm db's on your system with:
* find /etc /var -type f -exec file {} + | grep 'GNU dbm 1.x or ndbm database'
*
* You could also try using this helper script:
* http://bugs.gentoo.org/attachment.cgi?id=222581
* Messages for package dev-lang/perl-5.12.4-r1:
* ERROR: dev-lang/perl-5.12.4-r1 failed (configure phase):
* Unable to configure
*
* Call stack:
* ebuild.sh, line 75: Called src_configure
* environment, line 2697: Called die
* The specific snippet of code:
* sh Configure -des -Duseshrplib -Darchname="${myarch}" -Dcc="$(tc-getCC)" -Doptimize="${CFLAGS}" -Dldflags="${LDFLAGS}" -Dprefix='/usr' -Dsiteprefix='/usr' -Dvendorprefix='/usr' -Dscriptdir='/usr/bin' -Dprivlib="${PRIV_LIB}" -Darchlib="${ARCH_LIB}" -Dsitelib="${SITE_LIB}" -Dsitearch="${SITE_ARCH}" -Dvendorlib="${VENDOR_LIB}" -Dvendorarch="${VENDOR_ARCH}" -Dman1dir=/usr/share/man/man1 -Dman3dir=/usr/share/man/man3 -Dsiteman1dir=/usr/share/man/man1 -Dsiteman3dir=/usr/share/man/man3 -Dvendorman1dir=/usr/share/man/man1 -Dvendorman3dir=/usr/share/man/man3 -Dman1ext='1' -Dman3ext='3pm' -Dlibperl="${LIBPERL}" -Dlocincpth=' ' -Duselargefiles -Dd_semctl_semun -Dcf_by='Gentoo' -Dmyhostname='localhost' -Dperladmin='root@localhost' -Dinstallusrbinperl='n' -Ud_csh -Uusenm "${myconf[@]}" || die "Unable to configure"
*
* If you need support, post the output of 'emerge --info =dev-lang/perl-5.12.4-r1',
* the complete build log and the output of 'emerge -pqv =dev-lang/perl-5.12.4-r1'.
* The complete build log is located at '/var/tmp/portage/dev-lang/perl-5.12.4-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/perl-5.12.4-r1/temp/environment'.
* S: '/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1207, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1212, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/default/stage3-i486-20111220/.catalyst_lock'
Full build log at /tmp/catalyst-auto.32550/log/stage3.log
^ permalink raw reply [flat|nested] 25+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - stage3.spec
@ 2011-12-27 9:05 catalyst
0 siblings, 0 replies; 25+ messages in thread
From: catalyst @ 2011-12-27 9:05 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
ls: ignoring invalid width in environment variable COLUMNS: 0
THIS PACKAGE SEEMS TO BE INCOMPLETE.
You have the option of continuing the configuration process, despite the
distinct possibility that your kit is damaged, by typing 'y'es. If you
do, don't blame me if something goes wrong. I advise you to type 'n'o
and contact the author (perlbug@perl.org).
Continue? [n] ABORTING...
* ERROR: dev-lang/perl-5.12.4-r1 failed (configure phase):
* Unable to configure
*
* Call stack:
* ebuild.sh, line 75: Called src_configure
* environment, line 2697: Called die
* The specific snippet of code:
* sh Configure -des -Duseshrplib -Darchname="${myarch}" -Dcc="$(tc-getCC)" -Doptimize="${CFLAGS}" -Dldflags="${LDFLAGS}" -Dprefix='/usr' -Dsiteprefix='/usr' -Dvendorprefix='/usr' -Dscriptdir='/usr/bin' -Dprivlib="${PRIV_LIB}" -Darchlib="${ARCH_LIB}" -Dsitelib="${SITE_LIB}" -Dsitearch="${SITE_ARCH}" -Dvendorlib="${VENDOR_LIB}" -Dvendorarch="${VENDOR_ARCH}" -Dman1dir=/usr/share/man/man1 -Dman3dir=/usr/share/man/man3 -Dsiteman1dir=/usr/share/man/man1 -Dsiteman3dir=/usr/share/man/man3 -Dvendorman1dir=/usr/share/man/man1 -Dvendorman3dir=/usr/share/man/man3 -Dman1ext='1' -Dman3ext='3pm' -Dlibperl="${LIBPERL}" -Dlocincpth=' ' -Duselargefiles -Dd_semctl_semun -Dcf_by='Gentoo' -Dmyhostname='localhost' -Dperladmin='root@localhost' -Dinstallusrbinperl='n' -Ud_csh -Uusenm "${myconf[@]}" || die "Unable to configure"
*
* If you need support, post the output of 'emerge --info =dev-lang/perl-5.12.4-r1',
* the complete build log and the output of 'emerge -pqv =dev-lang/perl-5.12.4-r1'.
* The complete build log is located at '/var/tmp/portage/dev-lang/perl-5.12.4-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/perl-5.12.4-r1/temp/environment'.
* S: '/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4'
* Messages for package sys-libs/timezone-data-2011l:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package app-portage/portage-utils-0.3.1:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package sys-libs/glibc-2.13-r4:
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-fs/udev-164-r2:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* udev-164 does not support Linux kernel before version 2.6.25!
* For a reliable udev, use at least kernel 2.6.27
*
* If after the udev update removable devices or CD/DVD drives
* stop working, try re-emerging HAL before filling a bug report
*
* persistent-net does assigning fixed names to network devices.
* If you have problems with the persistent-net rules,
* just delete the rules file
* rm /etc/udev/rules.d/70-persistent-net.rules
* and then reboot.
*
* This may however number your devices in a different way than they are now.
*
* If you build an initramfs including udev, then please
* make sure that the /sbin/udevadm binary gets included,
* and your scripts changed to use it,as it replaces the
* old helper apps udevinfo, udevtrigger, ...
*
* mount options for directory /dev are no longer
* set in /etc/udev/udev.conf, but in /etc/fstab
* as for other directories.
*
* If you use /dev/md/*, /dev/loop/* or /dev/rd/*,
* then please migrate over to using the device names
* /dev/md*, /dev/loop* and /dev/ram*.
* The devfs-compat rules have been removed.
* For reference see Bug #269359.
*
* Rules for /dev/hd* devices have been removed
* Please migrate to libata.
*
* For more information on udev on Gentoo, writing udev rules, and
* fixing known issues visit:
* http://www.gentoo.org/doc/en/udev-guide.xml
* Messages for package sys-libs/gdbm-1.8.3-r4:
* 32bit systems might have to rebuild all gdbm databases due to
* LFS changes in the gdbm format. You can either delete the db
* and regenerate it from scratch, or use the converter:
* http://bugs.gentoo.org/attachment.cgi?id=215326
*
* See this comment for information on how to use it:
* http://bugs.gentoo.org/299390#c15
*
* You should be able to locate most gdbm db's on your system with:
* find /etc /var -type f -exec file {} + | grep 'GNU dbm 1.x or ndbm database'
*
* You could also try using this helper script:
* http://bugs.gentoo.org/attachment.cgi?id=222581
* Messages for package dev-lang/perl-5.12.4-r1:
* ERROR: dev-lang/perl-5.12.4-r1 failed (configure phase):
* Unable to configure
*
* Call stack:
* ebuild.sh, line 75: Called src_configure
* environment, line 2697: Called die
* The specific snippet of code:
* sh Configure -des -Duseshrplib -Darchname="${myarch}" -Dcc="$(tc-getCC)" -Doptimize="${CFLAGS}" -Dldflags="${LDFLAGS}" -Dprefix='/usr' -Dsiteprefix='/usr' -Dvendorprefix='/usr' -Dscriptdir='/usr/bin' -Dprivlib="${PRIV_LIB}" -Darchlib="${ARCH_LIB}" -Dsitelib="${SITE_LIB}" -Dsitearch="${SITE_ARCH}" -Dvendorlib="${VENDOR_LIB}" -Dvendorarch="${VENDOR_ARCH}" -Dman1dir=/usr/share/man/man1 -Dman3dir=/usr/share/man/man3 -Dsiteman1dir=/usr/share/man/man1 -Dsiteman3dir=/usr/share/man/man3 -Dvendorman1dir=/usr/share/man/man1 -Dvendorman3dir=/usr/share/man/man3 -Dman1ext='1' -Dman3ext='3pm' -Dlibperl="${LIBPERL}" -Dlocincpth=' ' -Duselargefiles -Dd_semctl_semun -Dcf_by='Gentoo' -Dmyhostname='localhost' -Dperladmin='root@localhost' -Dinstallusrbinperl='n' -Ud_csh -Uusenm "${myconf[@]}" || die "Unable to configure"
*
* If you need support, post the output of 'emerge --info =dev-lang/perl-5.12.4-r1',
* the complete build log and the output of 'emerge -pqv =dev-lang/perl-5.12.4-r1'.
* The complete build log is located at '/var/tmp/portage/dev-lang/perl-5.12.4-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/perl-5.12.4-r1/temp/environment'.
* S: '/var/tmp/portage/dev-lang/perl-5.12.4-r1/work/perl-5.12.4'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1207, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1212, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/default/stage3-i486-20111227/.catalyst_lock'
Full build log at /tmp/catalyst-auto.11109/log/stage3.log
^ permalink raw reply [flat|nested] 25+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - stage3.spec
@ 2012-01-17 11:08 catalyst
0 siblings, 0 replies; 25+ messages in thread
From: catalyst @ 2012-01-17 11:08 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
make[1]: Leaving directory `/var/tmp/portage/sys-devel/gcc-4.5.3-r1/work/build'
make: *** [bootstrap-lean] Error 2
emake failed
* ERROR: sys-devel/gcc-4.5.3-r1 failed (compile phase):
* emake failed with bootstrap-lean
*
* Call stack:
* ebuild.sh, line 75: Called src_compile
* environment, line 4058: Called toolchain_src_compile
* environment, line 4713: Called gcc_do_make
* environment, line 2391: Called die
* The specific snippet of code:
* emake LDFLAGS="${LDFLAGS}" STAGE1_CFLAGS="${STAGE1_CFLAGS}" LIBPATH="${LIBPATH}" BOOT_CFLAGS="${BOOT_CFLAGS}" ${GCC_MAKE_TARGET} || die "emake failed with ${GCC_MAKE_TARGET}";
*
* If you need support, post the output of 'emerge --info =sys-devel/gcc-4.5.3-r1',
* the complete build log and the output of 'emerge -pqv =sys-devel/gcc-4.5.3-r1'.
bzip2: I/O or other error, bailing out. Possible reason follows.
bzip2: No space left on device
Input file = (stdin), output file = (stdout)
tar: Child returned status 1
tar: Error is not recoverable: exiting now
*
* Please include /var/tmp/portage/sys-devel/gcc-4.5.3-r1/work/build/gcc-build-logs.tar.bz2 in your bug report
*
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/temp/environment'.
* S: '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/work/build'
* Messages for package sys-libs/timezone-data-2011n:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package app-portage/portage-utils-0.8:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package sys-libs/glibc-2.13-r4:
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-fs/udev-164-r2:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* udev-164 does not support Linux kernel before version 2.6.25!
* For a reliable udev, use at least kernel 2.6.27
*
* If after the udev update removable devices or CD/DVD drives
* stop working, try re-emerging HAL before filling a bug report
*
* persistent-net does assigning fixed names to network devices.
* If you have problems with the persistent-net rules,
* just delete the rules file
* rm /etc/udev/rules.d/70-persistent-net.rules
* and then reboot.
*
* This may however number your devices in a different way than they are now.
*
* If you build an initramfs including udev, then please
* make sure that the /sbin/udevadm binary gets included,
* and your scripts changed to use it,as it replaces the
* old helper apps udevinfo, udevtrigger, ...
*
* mount options for directory /dev are no longer
* set in /etc/udev/udev.conf, but in /etc/fstab
* as for other directories.
*
* If you use /dev/md/*, /dev/loop/* or /dev/rd/*,
* then please migrate over to using the device names
* /dev/md*, /dev/loop* and /dev/ram*.
* The devfs-compat rules have been removed.
* For reference see Bug #269359.
*
* Rules for /dev/hd* devices have been removed
* Please migrate to libata.
*
* For more information on udev on Gentoo, writing udev rules, and
* fixing known issues visit:
* http://www.gentoo.org/doc/en/udev-guide.xml
* Messages for package sys-libs/gdbm-1.8.3-r4:
* 32bit systems might have to rebuild all gdbm databases due to
* LFS changes in the gdbm format. You can either delete the db
* and regenerate it from scratch, or use the converter:
* http://bugs.gentoo.org/attachment.cgi?id=215326
*
* See this comment for information on how to use it:
* http://bugs.gentoo.org/299390#c15
*
* You should be able to locate most gdbm db's on your system with:
* find /etc /var -type f -exec file {} + | grep 'GNU dbm 1.x or ndbm database'
*
* You could also try using this helper script:
* http://bugs.gentoo.org/attachment.cgi?id=222581
* Messages for package sys-apps/portage-2.1.10.41:
* If you are an ebuild developer and you plan to commit ebuilds
* with this system then please install dev-python/pycrypto or
* enable the ssl USE flag for >=dev-lang/python-2.6 in order
* to enable RMD160 hash support.
* See bug #198398 for more information.
* Messages for package app-misc/ca-certificates-20111025:
* You should run update-ca-certificates manually after etc-update
* Messages for package dev-vcs/git-1.7.3.4-r1:
* These additional scripts need some dependencies:
* git-quiltimport : dev-util/quilt
* git-instaweb : || ( www-servers/lighttpd www-servers/apache )
* Messages for package sys-apps/coreutils-8.7:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package net-misc/wget-1.12-r3:
* The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
* Messages for package sys-fs/e2fsprogs-1.41.14:
* No /etc/mtab file, creating one temporarily
* Messages for package sys-devel/gcc-4.5.3-r1:
* ERROR: sys-devel/gcc-4.5.3-r1 failed (compile phase):
* emake failed with bootstrap-lean
*
* Call stack:
* ebuild.sh, line 75: Called src_compile
* environment, line 4058: Called toolchain_src_compile
* environment, line 4713: Called gcc_do_make
* environment, line 2391: Called die
* The specific snippet of code:
* emake LDFLAGS="${LDFLAGS}" STAGE1_CFLAGS="${STAGE1_CFLAGS}" LIBPATH="${LIBPATH}" BOOT_CFLAGS="${BOOT_CFLAGS}" ${GCC_MAKE_TARGET} || die "emake failed with ${GCC_MAKE_TARGET}";
*
* If you need support, post the output of 'emerge --info =sys-devel/gcc-4.5.3-r1',
* the complete build log and the output of 'emerge -pqv =sys-devel/gcc-4.5.3-r1'.
*
* Please include /var/tmp/portage/sys-devel/gcc-4.5.3-r1/work/build/gcc-build-logs.tar.bz2 in your bug report
*
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/temp/environment'.
* S: '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/work/build'
* Processed 75 info files; 5 errors.
install-info: No space left on device for /usr/share/binutils-data/i486-pc-linux-gnu/2.21.1/info/dir
install-info: /usr/share/binutils-data/i486-pc-linux-gnu/2.21.1/info/dir: empty file
install-info: /usr/share/binutils-data/i486-pc-linux-gnu/2.21.1/info/dir: empty file
install-info: /usr/share/binutils-data/i486-pc-linux-gnu/2.21.1/info/dir: empty file
install-info: /usr/share/binutils-data/i486-pc-linux-gnu/2.21.1/info/dir: empty file
Traceback (most recent call last):
File "/usr/bin/emerge", line 43, in <module>
retval = emerge_main()
File "/usr/lib/portage/pym/_emerge/main.py", line 2034, in emerge_main
trees, mtimedb, retval)
File "/usr/lib/portage/pym/_emerge/main.py", line 390, in post_emerge
mtimedb.commit()
File "/usr/lib/portage/pym/portage/util/mtimedb.py", line 82, in commit
f.close()
File "/usr/lib/portage/pym/portage/util/__init__.py", line 1163, in close
f.close()
IOError: [Errno 28] No space left on device
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1207, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1212, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/default/stage3-i486-20120117/.catalyst_lock'
Full build log at /tmp/catalyst-auto.26828/log/stage3.log
^ permalink raw reply [flat|nested] 25+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - stage3.spec
@ 2012-08-28 10:46 catalyst
0 siblings, 0 replies; 25+ messages in thread
From: catalyst @ 2012-08-28 10:46 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
(pod2man --center="GNU" --release="gcc-4.5.3" --section=7 gpl.pod > doc/gpl.7.T$$ && \
mv -f doc/gpl.7.T$$ doc/gpl.7) || \
(rm -f doc/gpl.7.T$$ && exit 1)
cp doc/gcc.1 doc/g++.1
perl /var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/gcc-4.5.3/gcc/../contrib/texi2pod.pl -DBUGURL="@uref{http://bugs.gentoo.org/}" \
< /var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/gcc-4.5.3/gcc/fortran/invoke.texi > gfortran.pod
echo timestamp > doc/gfortran.1
(pod2man --center="GNU" --release="gcc-4.5.3" --section=1 gfortran.pod > doc/gfortran.1.T$$ && \
mv -f doc/gfortran.1.T$$ doc/gfortran.1) || \
(rm -f doc/gfortran.1.T$$ && exit 1)
rm gcc.pod gfortran.pod
make[3]: Leaving directory `/var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/build/gcc'
mkdir -p -- i486-pc-linux-gnu/libgcc
Checking multilib configuration for libgcc...
Configuring stage 2 in i486-pc-linux-gnu/libgcc
configure: creating cache ./config.cache
checking for --enable-version-specific-runtime-libs... no
checking for a BSD-compatible install... /usr/bin/install -c
checking for gawk... gawk
checking build system type... i486-pc-linux-gnu
checking host system type... i486-pc-linux-gnu
checking for i486-pc-linux-gnu-ar... /usr/i486-pc-linux-gnu/bin/ar
checking for i486-pc-linux-gnu-lipo... lipo
checking for i486-pc-linux-gnu-nm... /var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/build/./gcc/nm
checking for i486-pc-linux-gnu-ranlib... /usr/i486-pc-linux-gnu/bin/ranlib
checking for i486-pc-linux-gnu-strip... /usr/i486-pc-linux-gnu/bin/strip
checking whether ln -s works... yes
checking for i486-pc-linux-gnu-gcc... /var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/build/./gcc/xgcc -B/var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/build/./gcc/ -B/usr/i486-pc-linux-gnu/bin/ -B/usr/i486-pc-linux-gnu/lib/ -isystem /usr/i486-pc-linux-gnu/include -isystem /usr/i486-pc-linux-gnu/sys-include
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/build/./gcc/xgcc -B/var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/build/./gcc/ -B/usr/i486-pc-linux-gnu/bin/ -B/usr/i486-pc-linux-gnu/lib/ -isystem /usr/i486-pc-linux-gnu/include -isystem /usr/i486-pc-linux-gnu/sys-include accepts -g... yes
checking for /var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/build/./gcc/xgcc -B/var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/build/./gcc/ -B/usr/i486-pc-linux-gnu/bin/ -B/usr/i486-pc-linux-gnu/lib/ -isystem /usr/i486-pc-linux-gnu/include -isystem /usr/i486-pc-linux-gnu/sys-include option to accept ISO C89... none needed
checking how to run the C preprocessor... /lib/cpp
checking whether decimal floating point is supported... yes
checking whether fixed-point is supported... no
checking for __attribute__((visibility("hidden")))... yes
checking whether the target assembler supports thread-local storage... yes
checking whether the thread-local storage support is from emutls... no
configure: updating cache ./config.cache
configure: creating ./config.status
config.status: creating Makefile
config.status: executing default commands
rm: cannot remove `./conf1hecYC/subs.awk': Bad file descriptor
rm: cannot remove `./conf1hecYC/subs1.awk': Bad file descriptor
make[3]: Entering directory `/var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/build/i486-pc-linux-gnu/libgcc'
# If this is the top-level multilib, build all the other
# multilibs.
/var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/build/./gcc/xgcc -B/var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/build/./gcc/ -B/usr/i486-pc-linux-gnu/bin/ -B/usr/i486-pc-linux-gnu/lib/ -isystem /usr/i486-pc-linux-gnu/include -isystem /usr/i486-pc-linux-gnu/sys-include -g -O2 -march=i486 -pipe -O2 -g -O2 -march=i486 -pipe -DIN_GCC -W -Wall -Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -isystem ./include -fPIC -g -DHAVE_GTHR_DEFAULT -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED -I. -I. -I../.././gcc -I/var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/gcc-4.5.3/libgcc -I/var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/gcc-4.5.3/libgcc/. -I/var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/gcc-4.5.3/libgcc/../gcc -I/var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/gcc-4.5.3/libgcc/../include -I/var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/gcc-4.5.3/libgcc/config/libbid -DENABLE_DECIMAL_BID_FORMAT -DHAVE_CC_TLS -DUSE_TLS -o _muldi3.o -MT _muldi3.o -MD -MP
-MF _muldi3.dep -DL_muldi3 -c /var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/gcc-4.5.3/libgcc/../gcc/libgcc2.c \
-fvisibility=hidden -DHIDE_EXPORTS
In file included from /var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/gcc-4.5.3/libgcc/../gcc/tsystem.h:105:0,
from /var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/gcc-4.5.3/libgcc/../gcc/libgcc2.c:29:
/var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/build/./gcc/include-fixed/limits.h:34:23: fatal error: syslimits.h: No such file or directory
compilation terminated.
make[3]: *** [_muldi3.o] Error 1
make[3]: Leaving directory `/var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/build/i486-pc-linux-gnu/libgcc'
make[2]: *** [all-stage2-target-libgcc] Error 2
make[2]: Leaving directory `/var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/build'
make[1]: *** [stage2-bubble] Error 2
make[1]: Leaving directory `/var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/build'
make: *** [bootstrap-lean] Error 2
emake failed
* ERROR: sys-devel/gcc-4.5.3-r2 failed (compile phase):
* emake failed with bootstrap-lean
*
* Call stack:
* ebuild.sh, line 85: Called src_compile
* environment, line 4043: Called toolchain_src_compile
* environment, line 4683: Called gcc_do_make
* environment, line 2373: Called die
* The specific snippet of code:
* emake LDFLAGS="${LDFLAGS}" STAGE1_CFLAGS="${STAGE1_CFLAGS}" LIBPATH="${LIBPATH}" BOOT_CFLAGS="${BOOT_CFLAGS}" ${GCC_MAKE_TARGET} || die "emake failed with ${GCC_MAKE_TARGET}";
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.5.3-r2'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.5.3-r2'`.
*
* Please include /var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/build/gcc-build-logs.tar.bz2 in your bug report
*
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.5.3-r2/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.5.3-r2/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/build'
[Errno 2] No such file or directory: '/proc/23435/fd':
/usr/bin/sandbox "/usr/lib/portage/bin/misc-functions.sh" die_hooks
Traceback (most recent call last):
File "/usr/lib/portage/pym/portage/process.py", line 264, in spawn
env, gid, groups, uid, umask, pre_exec)
File "/usr/lib/portage/pym/portage/process.py", line 386, in _exec
_setup_pipes(fd_pipes)
File "/usr/lib/portage/pym/portage/process.py", line 430, in _setup_pipes
for fd in get_open_fds():
File "/usr/lib/portage/pym/portage/process.py", line 35, in get_open_fds
return (int(fd) for fd in os.listdir("/proc/%i/fd" % os.getpid()) \
File "/usr/lib/portage/pym/portage/__init__.py", line 230, in __call__
rval = self._func(*wrapped_args, **wrapped_kwargs)
OSError: [Errno 2] No such file or directory: '/proc/23435/fd'
* The ebuild phase 'die_hooks' has exited unexpectedly. This type of
* behavior is known to be triggered by things such as failed variable
* assignments (bug #190128) or bad substitution errors (bug #200313).
* Normally, before exiting, bash should have displayed an error message
* above. If bash did not produce an error message above, it's possible
* that the ebuild has called `exit` when it should have called `die`
* instead. This behavior may also be triggered by a corrupt bash binary or
* a hardware problem such as memory or cpu malfunction. If the problem is
* not reproducible or it appears to occur randomly, then it is likely to
* be triggered by a hardware problem. If you suspect a hardware problem
* then you should try some basic hardware diagnostics such as memtest.
* Please do not report this as a bug unless it is consistently
* reproducible and you are sure that your bash binary and hardware are
* functioning properly.
* Messages for package sys-libs/timezone-data-2012c:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package app-portage/portage-utils-0.10:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package sys-apps/baselayout-2.1-r1:
* You should reboot the system now to get /run mounted with tmpfs!
* Messages for package sys-libs/glibc-2.15-r2:
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-libs/gdbm-1.8.3-r4:
* 32bit systems might have to rebuild all gdbm databases due to
* LFS changes in the gdbm format. You can either delete the db
* and regenerate it from scratch, or use the converter:
* http://bugs.gentoo.org/attachment.cgi?id=215326
*
* See this comment for information on how to use it:
* http://bugs.gentoo.org/299390#c15
*
* You should be able to locate most gdbm db's on your system with:
* find /etc /var -type f -exec file {} + | grep 'GNU dbm 1.x or ndbm database'
*
* You could also try using this helper script:
* http://bugs.gentoo.org/attachment.cgi?id=222581
* Messages for package sys-apps/util-linux-2.20.1-r2:
* The agetty util now clears the terminal by default. You
* might want to add --noclear to your /etc/inittab lines.
* Messages for package sys-devel/gcc-4.5.3-r2:
* ERROR: sys-devel/gcc-4.5.3-r2 failed (compile phase):
* emake failed with bootstrap-lean
*
* Call stack:
* ebuild.sh, line 85: Called src_compile
* environment, line 4043: Called toolchain_src_compile
* environment, line 4683: Called gcc_do_make
* environment, line 2373: Called die
* The specific snippet of code:
* emake LDFLAGS="${LDFLAGS}" STAGE1_CFLAGS="${STAGE1_CFLAGS}" LIBPATH="${LIBPATH}" BOOT_CFLAGS="${BOOT_CFLAGS}" ${GCC_MAKE_TARGET} || die "emake failed with ${GCC_MAKE_TARGET}";
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.5.3-r2'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.5.3-r2'`.
*
* Please include /var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/build/gcc-build-logs.tar.bz2 in your bug report
*
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.5.3-r2/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.5.3-r2/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/build'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1194, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 206, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1254, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1199, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/default/stage3-i486-20120828/.catalyst_lock'
Full build log at /tmp/catalyst-auto.7666/log/stage3.log
^ permalink raw reply [flat|nested] 25+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - stage3.spec
@ 2014-12-10 6:38 catalyst
0 siblings, 0 replies; 25+ messages in thread
From: catalyst @ 2014-12-10 6:38 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
checking assembler for R_386_TLS_LDM_PLT reloc... no
checking assembler for dwarf2 debug_line support... yes
checking assembler for buggy dwarf2 .file directive... no
checking assembler for --gdwarf2 option... yes
checking assembler for --gstabs option... yes
checking assembler for --debug-prefix-map option... yes
checking assembler for .lcomm with alignment... no
checking assembler for gnu_unique_object... yes
ldd (Gentoo 2.19-r1 p3) 2.19
Copyright (C) 2014 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Written by Roland McGrath and Ulrich Drepper.
checking assembler for tolerance to line number 0... yes
checking linker PT_GNU_EH_FRAME support... yes
checking linker position independent executable support... yes
checking linker EH-compatible garbage collection of sections... yes
checking linker EH garbage collection of sections bug... no
checking linker --as-needed support... yes
checking linker --build-id support... yes
checking linker *_sol2 emulation support... no
checking linker --sysroot support... yes
checking __stack_chk_fail in target C library... (cached) yes
checking sys/sdt.h in the target C library... no
checking dl_iterate_phdr in target C library... unknown
checking whether to enable maintainer-specific portions of Makefiles... no
Links are now set up to build a native compiler for i486-pc-linux-gnu.
checking for exported symbols... yes
checking for -rdynamic... yes
checking for library containing dlopen... -ldl
checking for -fPIC -shared... yes
configure: updating cache ./config.cache
configure: creating ./config.status
config.status: creating as
config.status: creating collect-ld
config.status: creating nm
config.status: creating Makefile
config.status: creating ada/gcc-interface/Makefile
config.status: creating ada/Makefile
config.status: creating auto-host.h
config.status: executing default commands
make[3]: Entering directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/gcc'
TARGET_CPU_DEFAULT="" \
HEADERS="auto-host.h ansidecl.h" DEFINES="" \
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/mkconfig.sh config.h
/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/ -B/usr/i486-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include/i486-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -c -DEFAULT_SSP -O2 -march=i486 -pipe -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -W
cast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -DGENERATOR_FILE -I. -Ibuild -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/build -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include \
-DBASEVER="\"4.8.3\"" -DDATESTAMP="\"\"" \
-DREVISION="\"\"" \
-DDEVPHASE="\"\"" -DPKGVERSION="\"(Gentoo 4.8.3 p1.1, pie-0.5.9) \"" \
-DBUGURL="\"<https://bugs.gentoo.org/>\"" -o build/version.o /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/version.c
rm -f tmp-all-tree.def
echo '#include "tree.def"' > tmp-all-tree.def
echo 'END_OF_BASE_TREE_CODES' >> tmp-all-tree.def
echo '#include "c-family/c-common.def"' >> tmp-all-tree.def
ltf="/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/ada/gcc-interface/ada-tree.def /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/cp/cp-tree.def /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/java/java-tree.def /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/objc/objc-tree.def"; for f in $ltf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/||' >> tmp-all-tree.def
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-all-tree.def all-tree.def
echo timestamp > s-alltree
lsf="/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/cp/lang-specs.h /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/fortran/lang-specs.h /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/lto/lang-specs.h"; for f in $lsf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/||' > tmp-specs.h
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-specs.h specs.h
echo timestamp > s-specs
echo "/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/ -B/usr/i486-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include/i486-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -DEFAULT_SSP -O2 -march=i486 -pipe -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings
-Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -static-libstdc++ -static-libgcc " > checksum-options.tmp \
&& /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change checksum-options.tmp checksum-options
gawk -f /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/config/i386/i386-builtin-types.awk /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/config/i386/i386-builtin-types.def > tmp-bt.inc
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-bt.inc i386-builtin-types.inc
echo timestamp > s-i386-bt
cp /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c gcc-nm.c
cp /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c gcc-ranlib.c
rm -f mm_malloc.h
cat /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/config/i386/pmm_malloc.h > mm_malloc.h
TARGET_CPU_DEFAULT="" \
HEADERS="auto-host.h ansidecl.h" DEFINES="USED_FOR_TARGET " \
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/mkconfig.sh tconfig.h
(echo "@set version-GCC 4.8.3"; \
if [ "" = "experimental" ]; \
then echo "@set DEVELOPMENT"; \
else echo "@clear DEVELOPMENT"; \
fi) > gcc-vers.texiT
echo @set srcdir /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc >> gcc-vers.texiT
if [ -n "(Gentoo 4.8.3 p1.1, pie-0.5.9) " ]; then \
echo "@set VERSION_PACKAGE (Gentoo 4.8.3 p1.1, pie-0.5.9) " >> gcc-vers.texiT; \
fi
echo "@set BUGURL @uref{https://bugs.gentoo.org/}" >> gcc-vers.texiT; \
mv -f gcc-vers.texiT gcc-vers.texi
echo timestamp > gpl.pod
perl /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../contrib/texi2pod.pl /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/doc/include/gpl_v3.texi > gpl.pod
/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/ -B/usr/i486-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include/i486-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -c -DEFAULT_SSP -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\"
-DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"i486-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/i486-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"i486-pc-linux-gnu\" -DPERSONALITY=\"ar\" -O2 -march=i486 -pipe -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/wo
rk/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c -o gcc-ar.o
/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/ -B/usr/i486-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include/i486-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -c -DEFAULT_SSP -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\"
-DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"i486-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/i486-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"i486-pc-linux-gnu\" -DPERSONALITY=\"nm\" -O2 -march=i486 -pipe -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/wo
rk/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace gcc-nm.c -o gcc-nm.o
/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/ -B/usr/i486-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include/i486-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -c -DEFAULT_SSP -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\"
-DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"i486-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/i486-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"i486-pc-linux-gnu\" -DPERSONALITY=\"ranlib\" -O2 -march=i486 -pipe -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.
3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace gcc-ranlib.c -o gcc-ranlib.o
/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/ -B/usr/i486-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include/i486-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -c -DEFAULT_SSP -DGENERATOR_FILE -O2 -march=i486 -pipe -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -W
write-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gengtype.c -o gengtype.o
/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gengtype.c:21:21: fatal error: bconfig.h: No such file or directory
#include "bconfig.h"
^
compilation terminated.
Makefile:1070: recipe for target 'gengtype.o' failed
make[3]: *** [gengtype.o] Error 1
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/gcc'
Makefile:4233: recipe for target 'all-stage3-gcc' failed
make[2]: *** [all-stage3-gcc] Error 2
make[2]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
Makefile:18655: recipe for target 'stage3-bubble' failed
make[1]: *** [stage3-bubble] Error 2
make[1]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
Makefile:18729: recipe for target 'bootstrap-lean' failed
make: *** [bootstrap-lean] Error 2
* ERROR: sys-devel/gcc-4.8.3::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-build-logs.tar.bz2 in your bug report.
*
* Messages for package sys-libs/timezone-data-2014i-r1:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-apps/baselayout-2.2:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package app-portage/portage-utils-0.53:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package sys-apps/sysvinit-2.88-r7:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package sys-libs/glibc-2.19-r1:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-apps/less-458:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package sys-apps/coreutils-8.21:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-devel/gcc-4.8.3:
* ERROR: sys-devel/gcc-4.8.3::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-build-logs.tar.bz2 in your bug report.
*
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/default/stage3-i486-20141210/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.1sZpGZ/log/stage3.log
^ permalink raw reply [flat|nested] 25+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - stage3.spec
@ 2015-03-18 5:28 catalyst
0 siblings, 0 replies; 25+ messages in thread
From: catalyst @ 2015-03-18 5:28 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
checking assembler for .quad directive... yes
checking assembler for sahf mnemonic... yes
checking assembler for hle prefixes... yes
checking assembler for swap suffix... yes
checking assembler for different section symbol subtraction... yes
checking assembler for GOTOFF in data... yes
checking assembler for rep and lock prefix... yes
checking assembler for ud2 mnemonic... yes
checking assembler for R_386_TLS_GD_PLT reloc... no
checking assembler for R_386_TLS_LDM_PLT reloc... no
checking assembler for dwarf2 debug_line support... yes
checking assembler for buggy dwarf2 .file directive... no
checking assembler for --gdwarf2 option... yes
checking assembler for --gstabs option... yes
checking assembler for --debug-prefix-map option... yes
checking assembler for .lcomm with alignment... no
checking assembler for gnu_unique_object... yes
ldd (Gentoo 2.19-r1 p3) 2.19
Copyright (C) 2014 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Written by Roland McGrath and Ulrich Drepper.
checking assembler for tolerance to line number 0... yes
checking linker PT_GNU_EH_FRAME support... yes
checking linker position independent executable support... yes
checking linker EH-compatible garbage collection of sections... yes
checking linker EH garbage collection of sections bug... no
checking linker --as-needed support... yes
checking linker --build-id support... yes
checking linker *_sol2 emulation support... no
checking linker --sysroot support... yes
checking __stack_chk_fail in target C library... (cached) yes
checking sys/sdt.h in the target C library... no
checking dl_iterate_phdr in target C library... unknown
checking whether to enable maintainer-specific portions of Makefiles... no
Links are now set up to build a native compiler for i486-pc-linux-gnu.
checking for exported symbols... yes
checking for -rdynamic... yes
checking for library containing dlopen... -ldl
checking for -fPIC -shared... yes
configure: updating cache ./config.cache
configure: creating ./config.status
config.status: creating as
config.status: creating collect-ld
config.status: creating nm
config.status: creating Makefile
config.status: creating ada/gcc-interface/Makefile
config.status: creating ada/Makefile
config.status: creating auto-host.h
config.status: executing default commands
make[3]: Entering directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/gcc'
TARGET_CPU_DEFAULT="" \
HEADERS="auto-host.h ansidecl.h" DEFINES="" \
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/mkconfig.sh config.h
/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/ -B/usr/i486-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include/i486-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -c -DEFAULT_SSP -O2 -march=i486 -pipe -gtoggle -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-s
trings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -DGENERATOR_FILE -I. -Ibuild -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/build -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include \
-DBASEVER="\"4.8.3\"" -DDATESTAMP="\"\"" \
-DREVISION="\"\"" \
-DDEVPHASE="\"\"" -DPKGVERSION="\"(Gentoo 4.8.3 p1.1, pie-0.5.9) \"" \
-DBUGURL="\"<https://bugs.gentoo.org/>\"" -o build/version.o /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/version.c
rm -f tmp-all-tree.def
echo '#include "tree.def"' > tmp-all-tree.def
echo 'END_OF_BASE_TREE_CODES' >> tmp-all-tree.def
echo '#include "c-family/c-common.def"' >> tmp-all-tree.def
ltf="/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/ada/gcc-interface/ada-tree.def /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/cp/cp-tree.def /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/java/java-tree.def /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/objc/objc-tree.def"; for f in $ltf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/||' >> tmp-all-tree.def
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-all-tree.def all-tree.def
echo timestamp > s-alltree
lsf="/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/cp/lang-specs.h /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/fortran/lang-specs.h /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/lto/lang-specs.h"; for f in $lsf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/||' > tmp-specs.h
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-specs.h specs.h
echo timestamp > s-specs
echo "/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/ -B/usr/i486-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include/i486-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -DEFAULT_SSP -O2 -march=i486 -pipe -gtoggle -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrit
e-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -static-libstdc++ -static-libgcc " > checksum-options.tmp \
&& /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change checksum-options.tmp checksum-options
gawk -f /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/config/i386/i386-builtin-types.awk /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/config/i386/i386-builtin-types.def > tmp-bt.inc
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-bt.inc i386-builtin-types.inc
echo timestamp > s-i386-bt
cp /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c gcc-nm.c
cp /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c gcc-ranlib.c
rm -f mm_malloc.h
cat /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/config/i386/pmm_malloc.h > mm_malloc.h
TARGET_CPU_DEFAULT="" \
HEADERS="auto-host.h ansidecl.h" DEFINES="USED_FOR_TARGET " \
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/mkconfig.sh tconfig.h
(echo "@set version-GCC 4.8.3"; \
if [ "" = "experimental" ]; \
then echo "@set DEVELOPMENT"; \
else echo "@clear DEVELOPMENT"; \
fi) > gcc-vers.texiT
echo @set srcdir /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc >> gcc-vers.texiT
if [ -n "(Gentoo 4.8.3 p1.1, pie-0.5.9) " ]; then \
echo "@set VERSION_PACKAGE (Gentoo 4.8.3 p1.1, pie-0.5.9) " >> gcc-vers.texiT; \
fi
echo "@set BUGURL @uref{https://bugs.gentoo.org/}" >> gcc-vers.texiT; \
mv -f gcc-vers.texiT gcc-vers.texi
echo timestamp > gpl.pod
perl /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../contrib/texi2pod.pl /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/doc/include/gpl_v3.texi > gpl.pod
/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/ -B/usr/i486-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include/i486-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -c -DEFAULT_SSP -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\"
-DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"i486-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/i486-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"i486-pc-linux-gnu\" -DPERSONALITY=\"ar\" -O2 -march=i486 -pipe -gtoggle -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc
-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c -o gcc-ar.o
/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/ -B/usr/i486-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include/i486-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -c -DEFAULT_SSP -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\"
-DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"i486-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/i486-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"i486-pc-linux-gnu\" -DPERSONALITY=\"nm\" -O2 -march=i486 -pipe -gtoggle -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc
-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace gcc-nm.c -o gcc-nm.o
/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/ -B/usr/i486-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include/i486-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -c -DEFAULT_SSP -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\"
-DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"i486-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/i486-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"i486-pc-linux-gnu\" -DPERSONALITY=\"ranlib\" -O2 -march=i486 -pipe -gtoggle -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel
/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace gcc-ranlib.c -o gcc-ranlib.o
/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/ -B/usr/i486-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include/i486-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -c -DEFAULT_SSP -DGENERATOR_FILE -O2 -march=i486 -pipe -gtoggle -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-nar
rowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gengtype.c -o gengtype.o
/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gengtype.c:21:21: fatal error: bconfig.h: No such file or directory
#include "bconfig.h"
^
compilation terminated.
Makefile:1070: recipe for target 'gengtype.o' failed
make[3]: *** [gengtype.o] Error 1
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/gcc'
Makefile:4194: recipe for target 'all-stage2-gcc' failed
make[2]: *** [all-stage2-gcc] Error 2
make[2]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
Makefile:18523: recipe for target 'stage2-bubble' failed
make[1]: *** [stage2-bubble] Error 2
make[1]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
Makefile:18729: recipe for target 'bootstrap-lean' failed
make: *** [bootstrap-lean] Error 2
* ERROR: sys-devel/gcc-4.8.3::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-build-logs.tar.bz2 in your bug report.
*
* Messages for package sys-libs/timezone-data-2014j:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-apps/baselayout-2.2:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package sys-apps/sysvinit-2.88-r7:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package sys-libs/glibc-2.19-r1:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-apps/less-458:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package sys-apps/coreutils-8.21:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-devel/gcc-4.8.3:
* ERROR: sys-devel/gcc-4.8.3::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-build-logs.tar.bz2 in your bug report.
*
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1253, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1333, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1258, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/default/stage3-i486-20150318/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.ic6LU1/log/stage3.log
^ permalink raw reply [flat|nested] 25+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - stage3.spec
@ 2015-07-29 6:05 catalyst
0 siblings, 0 replies; 25+ messages in thread
From: catalyst @ 2015-07-29 6:05 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
TARGET_CPU_DEFAULT="" \
HEADERS="options.h insn-constants.h config/vxworks-dummy.h config/i386/i386.h config/linux-android.h config/i386/unix.h config/i386/att.h config/dbxelf.h config/elfos.h config/gnu-user.h config/glibc-stdint.h config/linux.h config/i386/x86-64.h config/i386/gnu-user-common.h config/i386/gnu-user64.h config/i386/linux-common.h config/i386/linux64.h config/initfini-array.h defaults.h" DEFINES="LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3 DEFAULT_LIBC=LIBC_GLIBC ANDROID_DEFAULT=0 TARGET_BI_ARCH=1" \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/mkconfig.sh tm.h
/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/ -B/usr/i486-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include/i486-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -c -DEFAULT_SSP -O2 -march=i486 -pipe -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -W
cast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -DGENERATOR_FILE -I. -Ibuild -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/build -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libcpp/include \
-DBASEVER="\"4.8.4\"" -DDATESTAMP="\"\"" \
-DREVISION="\"\"" \
-DDEVPHASE="\"\"" -DPKGVERSION="\"(Gentoo 4.8.4 p1.6, pie-0.6.1) \"" \
-DBUGURL="\"<https://bugs.gentoo.org/>\"" -o build/version.o /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/version.c
rm -f tmp-all-tree.def
echo '#include "tree.def"' > tmp-all-tree.def
echo 'END_OF_BASE_TREE_CODES' >> tmp-all-tree.def
echo '#include "c-family/c-common.def"' >> tmp-all-tree.def
ltf="/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/ada/gcc-interface/ada-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/cp/cp-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/java/java-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/objc/objc-tree.def"; for f in $ltf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/||' >> tmp-all-tree.def
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-all-tree.def all-tree.def
echo timestamp > s-alltree
if test no = yes \
|| test -n "m64=../lib64 m32=../lib mx32=../libx32"; then \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/genmultilib \
"m64/m32" \
" 64 32" \
"" \
"" \
"" \
"" \
"m64=../lib64 m32=../lib mx32=../libx32" \
"" \
"" \
"" \
"no" \
> tmp-mlib.h; \
else \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/genmultilib '' '' '' '' '' '' '' '' \
"" '' no \
> tmp-mlib.h; \
fi
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-mlib.h multilib.h
echo timestamp > s-mlib
lsf="/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/cp/lang-specs.h /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/fortran/lang-specs.h /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/lto/lang-specs.h"; for f in $lsf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/||' > tmp-specs.h
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-specs.h specs.h
echo timestamp > s-specs
echo "/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/ -B/usr/i486-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include/i486-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -DEFAULT_SSP -O2 -march=i486 -pipe -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings
-Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -static-libstdc++ -static-libgcc " > checksum-options.tmp \
&& /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change checksum-options.tmp checksum-options
gawk -f /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386-builtin-types.awk /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386-builtin-types.def > tmp-bt.inc
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-bt.inc i386-builtin-types.inc
echo timestamp > s-i386-bt
cp /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gcc-ar.c gcc-nm.c
cp /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gcc-ar.c gcc-ranlib.c
/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/ -B/usr/i486-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include/i486-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -c -DEFAULT_SSP -DHOST_GENERATOR_FILE -O2 -march=i486 -pipe -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowi
ng -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c -o gengtype.o
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:0:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:500:34: error: declaration of C function 'const char* strsignal(int)' conflicts with
extern const char *strsignal (int);
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include/cstring:42:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:205,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/usr/include/string.h:563:14: error: previous declaration 'char* strsignal(int)' here
extern char *strsignal (int __sig) __THROW;
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:645:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include/libiberty.h:110:36: error: new declaration 'char* basename(const char*)'
extern char *basename (const char *);
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i486-pc-linux-gnu/libstdc++-v3/include/cstring:42:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:205,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/usr/include/string.h:600:26: error: ambiguates old declaration 'const char* basename(const char*)'
extern "C++" const char *basename (const char *__filename)
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:0:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:289:56: error: 'CHAR_BIT' was not declared in this scope
? ~ (t) 0 << (sizeof(t) * CHAR_BIT - 1) : (t) 0))
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:290:44: note: in expansion of macro 'INTTYPE_MINIMUM'
#define INTTYPE_MAXIMUM(t) ((t) (~ (t) 0 - INTTYPE_MINIMUM (t)))
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:294:20: note: in expansion of macro 'INTTYPE_MAXIMUM'
# define UCHAR_MAX INTTYPE_MAXIMUM (unsigned char)
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.h:455:23: note: in expansion of macro 'UCHAR_MAX'
CHAR_TOKEN_OFFSET = UCHAR_MAX + 1,
^
Makefile:1070: recipe for target 'gengtype.o' failed
make[3]: *** [gengtype.o] Error 1
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/gcc'
Makefile:4233: recipe for target 'all-stage3-gcc' failed
make[2]: *** [all-stage3-gcc] Error 2
make[2]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
Makefile:18655: recipe for target 'stage3-bubble' failed
make[1]: *** [stage3-bubble] Error 2
make[1]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
Makefile:18729: recipe for target 'bootstrap-lean' failed
make: *** [bootstrap-lean] Error 2
* ERROR: sys-devel/gcc-4.8.4::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.4::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-build-logs.tar.bz2 in your bug report.
*
* Messages for package sys-libs/timezone-data-2015b:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-apps/baselayout-2.2:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package sys-apps/sysvinit-2.88-r7:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package dev-perl/Module-Build-0.420.500:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /usr/bin/config_data
* /usr/share/man/man1/config_data.1.bz2
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'dev-perl/Module-Build-0.420.500' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* Messages for package sys-libs/glibc-2.20-r2:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-apps/less-478:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package sys-apps/coreutils-8.23:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-devel/gcc-4.8.4:
* ERROR: sys-devel/gcc-4.8.4::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.4::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-build-logs.tar.bz2 in your bug report.
*
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1253, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1333, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1258, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/default/stage3-i486-20150729/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.rR35es/log/stage3.log
^ permalink raw reply [flat|nested] 25+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - stage3.spec
@ 2015-11-25 5:49 catalyst
0 siblings, 0 replies; 25+ messages in thread
From: catalyst @ 2015-11-25 5:49 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
25 Nov 2015 05:40:58 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
25 Nov 2015 05:40:58 UTC: NOTICE : Using target: stage3
25 Nov 2015 05:40:59 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage2-i486-20151125.tar.xz
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
25 Nov 2015 05:41:09 UTC: NOTICE : purge(); clearing autoresume ...
25 Nov 2015 05:41:09 UTC: NOTICE : purge(); clearing chroot ...
25 Nov 2015 05:41:09 UTC: NOTICE : Clearing the chroot path ...
25 Nov 2015 05:41:09 UTC: NOTICE : purge(); clearing package cache ...
25 Nov 2015 05:41:09 UTC: NOTICE : purging the pkgcache ...
25 Nov 2015 05:41:09 UTC: NOTICE : purge(); clearing kerncache ...
25 Nov 2015 05:41:09 UTC: NOTICE : --- Running action sequence: unpack
25 Nov 2015 05:41:09 UTC: NOTICE : Clearing the chroot path ...
25 Nov 2015 05:41:09 UTC: NOTICE : Starting None from /home/release/buildroot/x86-dev/builds/default/stage2-i486-20151125.tar.xz
25 Nov 2015 05:41:09 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20151125 (this may take some time) ..
25 Nov 2015 05:41:11 UTC: NOTICE : --- Running action sequence: unpack_snapshot
25 Nov 2015 05:41:11 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
25 Nov 2015 05:41:26 UTC: NOTICE : --- Running action sequence: setup_confdir
25 Nov 2015 05:41:26 UTC: NOTICE : --- Running action sequence: portage_overlay
25 Nov 2015 05:41:26 UTC: NOTICE : --- Running action sequence: base_dirs
25 Nov 2015 05:41:26 UTC: NOTICE : --- Running action sequence: bind
25 Nov 2015 05:41:26 UTC: NOTICE : --- Running action sequence: chroot_setup
25 Nov 2015 05:41:26 UTC: NOTICE : Setting up chroot...
25 Nov 2015 05:41:26 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
25 Nov 2015 05:41:26 UTC: WARNING : If your build fails look here first as the possible problem.
25 Nov 2015 05:41:26 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
25 Nov 2015 05:41:26 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
25 Nov 2015 05:41:26 UTC: WARNING : You have been warned.
25 Nov 2015 05:41:26 UTC: NOTICE : --- Running action sequence: setup_environment
25 Nov 2015 05:41:26 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20151125/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20151125/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20151125 /tmp/stage3-chroot.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 14) sys-libs/gdbm-1.11::gentoo
>>> Installing (1 of 14) sys-libs/gdbm-1.11::gentoo
>>> Emerging (2 of 14) app-misc/mime-types-9::gentoo
>>> Installing (2 of 14) app-misc/mime-types-9::gentoo
>>> Emerging (3 of 14) sys-apps/install-xattr-0.5::gentoo
>>> Installing (3 of 14) sys-apps/install-xattr-0.5::gentoo
>>> Emerging (4 of 14) sys-apps/debianutils-4.4::gentoo
>>> Installing (4 of 14) sys-apps/debianutils-4.4::gentoo
>>> Emerging (5 of 14) sys-apps/attr-2.4.47-r2::gentoo
>>> Installing (5 of 14) sys-apps/attr-2.4.47-r2::gentoo
>>> Emerging (6 of 14) dev-libs/openssl-1.0.2d::gentoo
>>> Installing (6 of 14) dev-libs/openssl-1.0.2d::gentoo
>>> Emerging (7 of 14) app-misc/ca-certificates-20140927.3.17.2::gentoo
>>> Installing (7 of 14) app-misc/ca-certificates-20140927.3.17.2::gentoo
>>> Emerging (8 of 14) dev-lang/python-2.7.10-r1::gentoo
>>> Installing (8 of 14) dev-lang/python-2.7.10-r1::gentoo
>>> Emerging (9 of 14) dev-lang/python-3.4.3::gentoo
>>> Installing (9 of 14) dev-lang/python-3.4.3::gentoo
>>> Emerging (10 of 14) dev-python/packaging-15.3-r2::gentoo
>>> Installing (10 of 14) dev-python/packaging-15.3-r2::gentoo
>>> Emerging (11 of 14) dev-python/setuptools-18.4::gentoo
>>> Installing (11 of 14) dev-python/setuptools-18.4::gentoo
>>> Emerging (12 of 14) dev-python/certifi-2015.9.6.2::gentoo
>>> Installing (12 of 14) dev-python/certifi-2015.9.6.2::gentoo
>>> Emerging (13 of 14) dev-python/pyxattr-0.5.3::gentoo
>>> Installing (13 of 14) dev-python/pyxattr-0.5.3::gentoo
>>> Emerging (14 of 14) sys-apps/portage-2.2.20.1::gentoo
>>> Installing (14 of 14) sys-apps/portage-2.2.20.1::gentoo
* Messages for package app-misc/ca-certificates-20140927.3.17.2:
* You should run update-ca-certificates manually after etc-update
* Messages for package dev-python/packaging-15.3-r2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/setuptools-18.4:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/certifi-2015.9.6.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyxattr-0.5.3:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-apps/portage-2.2.20.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
emerge --quiet --usepkg --buildpkg --newuse -e @system
[nomerge ] sys-apps/openrc-0.17::gentoo USE="ncurses netifrc pam unicode -audit -debug -newnet (-prefix) (-selinux) -static-libs -tools"
[nomerge ] virtual/pkgconfig-0-r1::gentoo
[nomerge ] dev-util/pkgconfig-0.28-r2::gentoo USE="-hardened -internal-glib*"
[nomerge ] dev-libs/glib-2.44.1-r1:2::gentoo USE="mime xattr -dbus -debug (-fam) (-selinux) -static-libs -systemtap {-test} -utils" PYTHON_TARGETS="python2_7"
[ebuild N ] dev-util/desktop-file-utils-0.22::gentoo USE="-emacs" 0 KiB
[ebuild N ] x11-misc/shared-mime-info-1.4::gentoo USE="{-test}" 0 KiB
[ebuild R ] dev-util/pkgconfig-0.28-r2::gentoo USE="-hardened -internal-glib*" 0 KiB
[ebuild N ] dev-libs/glib-2.44.1-r1:2::gentoo USE="mime xattr -dbus -debug (-fam) (-selinux) -static-libs -systemtap {-test} -utils" PYTHON_TARGETS="python2_7" 0 KiB
Total: 4 packages (3 new, 1 reinstall), Size of downloads: 0 KiB
* Error: circular dependencies:
(dev-util/desktop-file-utils-0.22:0/0::gentoo, ebuild scheduled for merge) depends on
(dev-libs/glib-2.44.1-r1:2/2::gentoo, ebuild scheduled for merge) (buildtime)
(dev-util/desktop-file-utils-0.22:0/0::gentoo, ebuild scheduled for merge) (buildtime)
* Note that circular dependencies can often be avoided by temporarily
* disabling USE flags that trigger optional dependencies.
25 Nov 2015 05:49:43 UTC: ERROR : CatalystError: cmd() NON-zero return value from: run script failed.
25 Nov 2015 05:49:43 UTC: ERROR : CatalystError: Stage build aborting due to error.
25 Nov 2015 05:49:43 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1397, in run
getattr(self, x)()
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1309, in run_local
print_traceback=False)
CatalystError
25 Nov 2015 05:49:43 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /home/release/tmp/run/catalyst-auto.XKqkF7/log/stage3.log
^ permalink raw reply [flat|nested] 25+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - stage3.spec
@ 2017-12-20 5:40 catalyst
0 siblings, 0 replies; 25+ messages in thread
From: catalyst @ 2017-12-20 5:40 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
20 Dec 2017 05:30:21 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
20 Dec 2017 05:30:21 UTC: WARNING : If your build fails look here first as the possible problem.
20 Dec 2017 05:30:21 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
20 Dec 2017 05:30:21 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
20 Dec 2017 05:30:21 UTC: WARNING : You have been warned.
20 Dec 2017 05:30:21 UTC: NOTICE : Writing the stage make.conf to: /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20171220T030001Z/etc/portage/make.conf
20 Dec 2017 05:30:21 UTC: NOTICE : STICKY-CONFIG is enabled
20 Dec 2017 05:30:21 UTC: NOTICE : --- Running action sequence: setup_environment
20 Dec 2017 05:30:21 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20171220T030001Z/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20171220T030001Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20171220T030001Z /tmp/stage3-chroot.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 20) app-misc/mime-types-9::gentoo
>>> Installing (1 of 20) app-misc/mime-types-9::gentoo
>>> Emerging (2 of 20) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (2 of 20) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging (3 of 20) sys-apps/install-xattr-0.5::gentoo
>>> Installing (3 of 20) sys-apps/install-xattr-0.5::gentoo
>>> Emerging (4 of 20) sys-apps/debianutils-4.7::gentoo
>>> Installing (4 of 20) sys-apps/debianutils-4.7::gentoo
>>> Emerging (5 of 20) app-arch/unzip-6.0_p20::gentoo
>>> Installing (5 of 20) app-arch/unzip-6.0_p20::gentoo
>>> Emerging (6 of 20) sys-libs/gdbm-1.11::gentoo
>>> Installing (6 of 20) sys-libs/gdbm-1.11::gentoo
>>> Emerging (7 of 20) sys-apps/attr-2.4.47-r2::gentoo
>>> Installing (7 of 20) sys-apps/attr-2.4.47-r2::gentoo
>>> Emerging (8 of 20) dev-libs/openssl-1.0.2n::gentoo
>>> Installing (8 of 20) dev-libs/openssl-1.0.2n::gentoo
>>> Emerging (9 of 20) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Installing (9 of 20) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Emerging (10 of 20) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (10 of 20) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (11 of 20) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (11 of 20) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (12 of 20) dev-python/six-1.10.0::gentoo
>>> Installing (12 of 20) dev-python/six-1.10.0::gentoo
>>> Emerging (13 of 20) dev-python/pyblake2-0.9.3-r1::gentoo
>>> Installing (13 of 20) dev-python/pyblake2-0.9.3-r1::gentoo
>>> Emerging (14 of 20) dev-python/appdirs-1.4.3::gentoo
>>> Installing (14 of 20) dev-python/appdirs-1.4.3::gentoo
>>> Emerging (15 of 20) dev-python/pyparsing-2.2.0::gentoo
>>> Installing (15 of 20) dev-python/pyparsing-2.2.0::gentoo
>>> Emerging (16 of 20) dev-python/packaging-16.8::gentoo
>>> Installing (16 of 20) dev-python/packaging-16.8::gentoo
>>> Emerging (17 of 20) dev-python/setuptools-34.0.2-r1::gentoo
>>> Installing (17 of 20) dev-python/setuptools-34.0.2-r1::gentoo
>>> Emerging (18 of 20) dev-python/certifi-2017.4.17::gentoo
>>> Installing (18 of 20) dev-python/certifi-2017.4.17::gentoo
>>> Emerging (19 of 20) dev-python/pyxattr-0.5.5::gentoo
>>> Installing (19 of 20) dev-python/pyxattr-0.5.5::gentoo
>>> Emerging (20 of 20) sys-apps/portage-2.3.13-r1::gentoo
>>> Installing (20 of 20) sys-apps/portage-2.3.13-r1::gentoo
* Messages for package app-misc/ca-certificates-20161130.3.30.2:
* You should run update-ca-certificates manually after etc-update
* To prevent applications relying on system's trusted root certificate store
* from using CAs where at least one major browser vendor Gentoo is following
* has decided to apply trust level restrictions, the following
* certificate(s) were removed:
* mozilla/StartCom_Certification_Authority.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign_China.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/Certification_Authority_of_WoSign_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/CA_WoSign_ECC_Root.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign.crt removed; see https://bugs.gentoo.org/598072 for details
* Messages for package dev-python/six-1.10.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyblake2-0.9.3-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/appdirs-1.4.3:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyparsing-2.2.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/packaging-16.8:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/setuptools-34.0.2-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/certifi-2017.4.17:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyxattr-0.5.5:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-apps/portage-2.3.13-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
emerge --quiet --usepkg --buildpkg --newuse -e --update --deep --with-bdeps=y @system
[nomerge ] net-misc/wget-1.19.1-r2::gentoo USE="ipv6* nls* pcre* ssl* zlib* -debug -gnutls -idn -libressl -ntlm -static {-test} -uuid"
[nomerge ] virtual/pkgconfig-0-r1::gentoo
[nomerge ] dev-util/pkgconfig-0.29.2::gentoo USE="-hardened -internal-glib*"
[nomerge ] dev-libs/glib-2.50.3-r1:2::gentoo USE="mime xattr -dbus -debug (-fam) (-selinux) -static-libs -systemtap {-test} -utils" PYTHON_TARGETS="python2_7"
[ebuild N ] x11-misc/shared-mime-info-1.8::gentoo USE="{-test}" 0 KiB
[ebuild R ] dev-util/pkgconfig-0.29.2::gentoo USE="-hardened -internal-glib*" 0 KiB
[ebuild N ] dev-libs/glib-2.50.3-r1:2::gentoo USE="mime xattr -dbus -debug (-fam) (-selinux) -static-libs -systemtap {-test} -utils" PYTHON_TARGETS="python2_7" 0 KiB
[ebuild N ] virtual/service-manager-0::gentoo USE="(-prefix)" 0 KiB
[nomerge ] sys-apps/openrc-0.34.11::gentoo USE="ncurses netifrc pam unicode -audit -debug -newnet (-prefix) (-selinux) -static-libs"
[ebuild N ] net-misc/netifrc-0.5.1::gentoo 0 KiB
[ebuild N ] sys-apps/openrc-0.34.11::gentoo USE="ncurses netifrc pam unicode -audit -debug -newnet (-prefix) (-selinux) -static-libs" 0 KiB
[ebuild N ] virtual/dev-manager-0::gentoo 0 KiB
[nomerge ] sys-apps/hwids-20170328::gentoo USE="net pci udev usb"
[nomerge ] virtual/udev-217::gentoo USE="-systemd"
[ebuild N ] sys-fs/eudev-3.1.5::gentoo USE="hwdb kmod -introspection -rule-generator (-selinux) -static-libs {-test}" 0 KiB
[ebuild N ] sys-fs/udev-init-scripts-32::gentoo 0 KiB
[ebuild N ] sys-apps/hwids-20170328::gentoo USE="net pci udev usb" 0 KiB
[ebuild N ] virtual/udev-217::gentoo USE="-systemd" 0 KiB
[ebuild N ] virtual/ssh-0::gentoo USE="-minimal" 0 KiB
[ebuild N ] net-misc/openssh-7.5_p1-r3::gentoo USE="bindist hpn pam pie ssl -X -X509 -audit -debug -kerberos -ldap -ldns -libedit -libressl -livecd -sctp (-selinux) -skey -ssh1 -static {-test}" 0 KiB
[nomerge ] virtual/shadow-0::gentoo
[ebuild R ] sys-apps/shadow-4.5::gentoo USE="acl* cracklib* nls* pam* xattr* -audit (-selinux) -skey" LINGUAS="-cs -da -de -es -fi -fr -hu -id -it -ja -ko -pl -pt_BR -ru -sv -tr -zh_CN -zh_TW" 0 KiB
[nomerge ] sys-apps/util-linux-2.30.2::gentoo USE="cramfs ncurses nls pam readline suid unicode -build -caps -fdformat -kill -python (-selinux) -slang -static-libs -systemd {-test} -tty-helpers -udev" PYTHON_SINGLE_TARGET="python3_5 -python2_7 -python3_4 -python3_6" PYTHON_TARGETS="python2_7 python3_5 -python3_4 -python3_6"
[ebuild N ] sys-libs/pam-1.2.1-r2::gentoo USE="berkdb cracklib filecaps nls pie -audit -debug -nis (-selinux) {-test}" 0 KiB
[ebuild N ] sys-auth/pambase-20150213::gentoo USE="cracklib nullok sha512 -consolekit -debug -gnome-keyring -minimal -mktemp -pam_krb5 -pam_ssh -passwdqc -securetty (-selinux) -systemd" 0 KiB
[ebuild N ] sys-apps/man-pages-4.09::gentoo USE="nls" L10N="-da -de -fr -it -ja -nl -pl -ro -ru -zh-CN" 0 KiB
[ebuild N ] sys-apps/man-pages-posix-2013a::gentoo 0 KiB
[ebuild N ] virtual/man-0-r1::gentoo 0 KiB
[ebuild N ] sys-apps/man-db-2.7.6.1-r2::gentoo USE="berkdb gdbm manpager nls zlib (-selinux) -static-libs" 0 KiB
[ebuild N ] app-text/po4a-0.47-r1::gentoo USE="{-test}" LINGUAS="-af -ca -cs -da -de -eo -es -et -eu -fr -hr -id -it -ja -kn -ko -nb -nl -pl -pt -pt_BR -ru -sl -sv -uk -vi -zh_CN -zh_HK" 0 KiB
[ebuild N ] app-text/docbook-xml-dtd-4.1.2-r6:4.1.2::gentoo 0 KiB
[ebuild N ] app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo USE="-ruby" 0 KiB
[ebuild N ] app-text/build-docbook-catalog-1.19.1::gentoo 0 KiB
[ebuild N ] sys-fs/e2fsprogs-1.43.6::gentoo USE="nls -fuse -static-libs" 0 KiB
[ebuild N ] sys-apps/util-linux-2.30.2::gentoo USE="cramfs ncurses nls pam readline suid unicode -build -caps -fdformat -kill -python (-selinux) -slang -static-libs -systemd {-test} -tty-helpers -udev" PYTHON_SINGLE_TARGET="python3_5 -python2_7 -python3_4 -python3_6" PYTHON_TARGETS="python2_7 python3_5 -python3_4 -python3_6" 0 KiB
[nomerge ] sys-apps/kbd-2.0.3::gentoo USE="nls pam {-test}"
[nomerge ] virtual/pam-0-r1::gentoo
[nomerge ] sys-libs/pam-1.2.1-r2::gentoo USE="berkdb cracklib filecaps nls pie -audit -debug -nis (-selinux) {-test}"
[ebuild N ] sys-libs/libcap-2.24-r2::gentoo USE="pam -static-libs" 0 KiB
[ebuild N ] sys-apps/kbd-2.0.3::gentoo USE="nls pam {-test}" 0 KiB
[ebuild N ] virtual/pam-0-r1::gentoo 0 KiB
Total: 29 packages (27 new, 2 reinstalls), Size of downloads: 0 KiB
* Error: circular dependencies:
(sys-libs/libcap-2.24-r2:0/0::gentoo, ebuild scheduled for merge) depends on
(virtual/pam-0-r1:0/0::gentoo, ebuild scheduled for merge) (buildtime)
(sys-libs/pam-1.2.1-r2:0/0::gentoo, ebuild scheduled for merge) (runtime)
(sys-libs/libcap-2.24-r2:0/0::gentoo, ebuild scheduled for merge) (buildtime)
It might be possible to break this cycle
by applying any of the following changes:
- sys-libs/pam-1.2.1-r2 (Change USE: -filecaps)
- sys-libs/libcap-2.24-r2 (Change USE: -pam)
Note that this change can be reverted, once the package has been installed.
20 Dec 2017 05:40:48 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
20 Dec 2017 05:40:48 UTC: ERROR : CatalystError: Stage build aborting due to error.
20 Dec 2017 05:40:48 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1437, in run
getattr(self, x)()
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1346, in run_local
print_traceback=False)
CatalystError
20 Dec 2017 05:40:48 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
513.90user 113.83system 10:39.93elapsed 98%CPU (0avgtext+0avgdata 321908maxresident)k
8inputs+4283728outputs (0major+43163109minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20171220T030001Z.0rdUl7/log/stage3.log
^ permalink raw reply [flat|nested] 25+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - stage3.spec
@ 2017-12-27 5:42 catalyst
0 siblings, 0 replies; 25+ messages in thread
From: catalyst @ 2017-12-27 5:42 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
27 Dec 2017 05:32:17 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
27 Dec 2017 05:32:17 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
27 Dec 2017 05:32:17 UTC: WARNING : You have been warned.
27 Dec 2017 05:32:17 UTC: NOTICE : Writing the stage make.conf to: /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20171227T030001Z/etc/portage/make.conf
27 Dec 2017 05:32:17 UTC: NOTICE : STICKY-CONFIG is enabled
27 Dec 2017 05:32:17 UTC: NOTICE : --- Running action sequence: setup_environment
27 Dec 2017 05:32:17 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20171227T030001Z/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20171227T030001Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20171227T030001Z /tmp/stage3-chroot.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 20) app-misc/mime-types-9::gentoo
>>> Installing (1 of 20) app-misc/mime-types-9::gentoo
>>> Emerging (2 of 20) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (2 of 20) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging (3 of 20) sys-apps/install-xattr-0.5::gentoo
>>> Installing (3 of 20) sys-apps/install-xattr-0.5::gentoo
>>> Emerging (4 of 20) sys-apps/debianutils-4.7::gentoo
>>> Installing (4 of 20) sys-apps/debianutils-4.7::gentoo
>>> Emerging (5 of 20) app-arch/unzip-6.0_p20::gentoo
>>> Installing (5 of 20) app-arch/unzip-6.0_p20::gentoo
>>> Emerging (6 of 20) sys-libs/gdbm-1.11::gentoo
>>> Installing (6 of 20) sys-libs/gdbm-1.11::gentoo
>>> Emerging (7 of 20) sys-apps/attr-2.4.47-r2::gentoo
>>> Installing (7 of 20) sys-apps/attr-2.4.47-r2::gentoo
>>> Emerging (8 of 20) dev-libs/openssl-1.0.2n::gentoo
>>> Installing (8 of 20) dev-libs/openssl-1.0.2n::gentoo
>>> Emerging (9 of 20) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Installing (9 of 20) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Emerging (10 of 20) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (10 of 20) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (11 of 20) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (11 of 20) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (12 of 20) dev-python/six-1.10.0::gentoo
>>> Installing (12 of 20) dev-python/six-1.10.0::gentoo
>>> Emerging (13 of 20) dev-python/pyblake2-0.9.3-r1::gentoo
>>> Installing (13 of 20) dev-python/pyblake2-0.9.3-r1::gentoo
>>> Emerging (14 of 20) dev-python/appdirs-1.4.3::gentoo
>>> Installing (14 of 20) dev-python/appdirs-1.4.3::gentoo
>>> Emerging (15 of 20) dev-python/pyparsing-2.2.0::gentoo
>>> Installing (15 of 20) dev-python/pyparsing-2.2.0::gentoo
>>> Emerging (16 of 20) dev-python/packaging-16.8::gentoo
>>> Installing (16 of 20) dev-python/packaging-16.8::gentoo
>>> Emerging (17 of 20) dev-python/setuptools-34.0.2-r1::gentoo
>>> Installing (17 of 20) dev-python/setuptools-34.0.2-r1::gentoo
>>> Emerging (18 of 20) dev-python/certifi-2017.4.17::gentoo
>>> Installing (18 of 20) dev-python/certifi-2017.4.17::gentoo
>>> Emerging (19 of 20) dev-python/pyxattr-0.5.5::gentoo
>>> Installing (19 of 20) dev-python/pyxattr-0.5.5::gentoo
>>> Emerging (20 of 20) sys-apps/portage-2.3.13-r1::gentoo
>>> Installing (20 of 20) sys-apps/portage-2.3.13-r1::gentoo
* Messages for package app-misc/ca-certificates-20161130.3.30.2:
* You should run update-ca-certificates manually after etc-update
* To prevent applications relying on system's trusted root certificate store
* from using CAs where at least one major browser vendor Gentoo is following
* has decided to apply trust level restrictions, the following
* certificate(s) were removed:
* mozilla/StartCom_Certification_Authority.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign_China.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/Certification_Authority_of_WoSign_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/CA_WoSign_ECC_Root.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign.crt removed; see https://bugs.gentoo.org/598072 for details
* Messages for package dev-python/six-1.10.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyblake2-0.9.3-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/appdirs-1.4.3:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyparsing-2.2.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/packaging-16.8:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/setuptools-34.0.2-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/certifi-2017.4.17:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyxattr-0.5.5:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-apps/portage-2.3.13-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
emerge --quiet --usepkg --buildpkg --newuse -e --update --deep --with-bdeps=y @system
[nomerge ] virtual/service-manager-0::gentoo USE="(-prefix)"
[nomerge ] sys-apps/openrc-0.34.11::gentoo USE="ncurses netifrc pam unicode -audit -debug -newnet (-prefix) (-selinux) -static-libs"
[nomerge ] net-misc/netifrc-0.5.1::gentoo
[nomerge ] virtual/pkgconfig-0-r1::gentoo
[nomerge ] dev-util/pkgconfig-0.29.2::gentoo USE="-hardened -internal-glib*"
[nomerge ] dev-libs/glib-2.50.3-r1:2::gentoo USE="mime xattr -dbus -debug (-fam) (-selinux) -static-libs -systemtap {-test} -utils" PYTHON_TARGETS="python2_7"
[ebuild N ] x11-misc/shared-mime-info-1.8::gentoo USE="{-test}" 0 KiB
[ebuild R ] dev-util/pkgconfig-0.29.2::gentoo USE="-hardened -internal-glib*" 0 KiB
[ebuild N ] dev-libs/glib-2.50.3-r1:2::gentoo USE="mime xattr -dbus -debug (-fam) (-selinux) -static-libs -systemtap {-test} -utils" PYTHON_TARGETS="python2_7" 0 KiB
[ebuild N ] virtual/service-manager-0::gentoo USE="(-prefix)" 0 KiB
[ebuild N ] net-misc/netifrc-0.5.1::gentoo 0 KiB
[ebuild N ] sys-apps/openrc-0.34.11::gentoo USE="ncurses netifrc pam unicode -audit -debug -newnet (-prefix) (-selinux) -static-libs" 0 KiB
[ebuild N ] virtual/dev-manager-0::gentoo 0 KiB
[nomerge ] sys-fs/udev-init-scripts-32::gentoo
[nomerge ] virtual/udev-217::gentoo USE="-systemd"
[ebuild N ] sys-fs/eudev-3.1.5::gentoo USE="hwdb kmod -introspection -rule-generator (-selinux) -static-libs {-test}" 0 KiB
[ebuild N ] sys-fs/udev-init-scripts-32::gentoo 0 KiB
[ebuild N ] sys-apps/hwids-20170328::gentoo USE="net pci udev usb" 0 KiB
[ebuild N ] virtual/udev-217::gentoo USE="-systemd" 0 KiB
[ebuild N ] virtual/ssh-0::gentoo USE="-minimal" 0 KiB
[nomerge ] virtual/shadow-0::gentoo
[ebuild R ] sys-apps/shadow-4.5::gentoo USE="acl* nls* pam* xattr* -audit -cracklib (-selinux) -skey" LINGUAS="-cs -da -de -es -fi -fr -hu -id -it -ja -ko -pl -pt_BR -ru -sv -tr -zh_CN -zh_TW" 0 KiB
[nomerge ] virtual/ssh-0::gentoo USE="-minimal"
[ebuild N ] net-misc/openssh-7.5_p1-r3::gentoo USE="bindist hpn pam pie ssl -X -X509 -audit -debug -kerberos -ldap -ldns -libedit -libressl -livecd -sctp (-selinux) -skey -ssh1 -static {-test}" 0 KiB
[nomerge ] sys-apps/kbd-2.0.3::gentoo USE="nls pam {-test}"
[nomerge ] virtual/pam-0-r1::gentoo
[ebuild N ] sys-libs/pam-1.2.1-r2::gentoo USE="berkdb filecaps nls pie -audit -cracklib -debug -nis (-selinux) {-test}" 0 KiB
[ebuild N ] sys-auth/pambase-20150213-r1::gentoo USE="nullok sha512 -consolekit -cracklib -debug (-elogind) -gnome-keyring -minimal -mktemp -pam_krb5 -pam_ssh -passwdqc -securetty (-selinux) -systemd" 0 KiB
[ebuild N ] sys-apps/man-pages-4.09::gentoo USE="nls" L10N="-da -de -fr -it -ja -nl -pl -ro -ru -zh-CN" 0 KiB
[ebuild N ] sys-apps/man-pages-posix-2013a::gentoo 0 KiB
[ebuild N ] virtual/man-0-r1::gentoo 0 KiB
[ebuild N ] sys-apps/man-db-2.7.6.1-r2::gentoo USE="berkdb gdbm manpager nls zlib (-selinux) -static-libs" 0 KiB
[ebuild N ] app-text/po4a-0.47-r1::gentoo USE="{-test}" LINGUAS="-af -ca -cs -da -de -eo -es -et -eu -fr -hr -id -it -ja -kn -ko -nb -nl -pl -pt -pt_BR -ru -sl -sv -uk -vi -zh_CN -zh_HK" 0 KiB
[ebuild N ] app-text/docbook-xml-dtd-4.1.2-r6:4.1.2::gentoo 0 KiB
[ebuild N ] app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo USE="-ruby" 0 KiB
[ebuild N ] app-text/build-docbook-catalog-1.19.1::gentoo 0 KiB
[ebuild N ] sys-fs/e2fsprogs-1.43.6::gentoo USE="nls -fuse -static-libs" 0 KiB
[ebuild N ] sys-apps/util-linux-2.30.2::gentoo USE="cramfs ncurses nls pam readline suid unicode -build -caps -fdformat -kill -python (-selinux) -slang -static-libs -systemd {-test} -tty-helpers -udev" PYTHON_SINGLE_TARGET="python3_5 -python2_7 -python3_4 -python3_6" PYTHON_TARGETS="python2_7 python3_5 -python3_4 -python3_6" 0 KiB
[nomerge ] sys-apps/util-linux-2.30.2::gentoo USE="cramfs ncurses nls pam readline suid unicode -build -caps -fdformat -kill -python (-selinux) -slang -static-libs -systemd {-test} -tty-helpers -udev" PYTHON_SINGLE_TARGET="python3_5 -python2_7 -python3_4 -python3_6" PYTHON_TARGETS="python2_7 python3_5 -python3_4 -python3_6"
[nomerge ] sys-libs/pam-1.2.1-r2::gentoo USE="berkdb filecaps nls pie -audit -cracklib -debug -nis (-selinux) {-test}"
[ebuild N ] sys-libs/libcap-2.24-r2::gentoo USE="pam -static-libs" 0 KiB
[ebuild N ] sys-apps/kbd-2.0.3::gentoo USE="nls pam {-test}" 0 KiB
[ebuild N ] virtual/pam-0-r1::gentoo 0 KiB
Total: 29 packages (27 new, 2 reinstalls), Size of downloads: 0 KiB
* Error: circular dependencies:
(sys-libs/libcap-2.24-r2:0/0::gentoo, ebuild scheduled for merge) depends on
(virtual/pam-0-r1:0/0::gentoo, ebuild scheduled for merge) (buildtime)
(sys-libs/pam-1.2.1-r2:0/0::gentoo, ebuild scheduled for merge) (runtime)
(sys-libs/libcap-2.24-r2:0/0::gentoo, ebuild scheduled for merge) (buildtime)
It might be possible to break this cycle
by applying any of the following changes:
- sys-libs/pam-1.2.1-r2 (Change USE: -filecaps)
- sys-libs/libcap-2.24-r2 (Change USE: -pam)
Note that this change can be reverted, once the package has been installed.
27 Dec 2017 05:42:27 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
27 Dec 2017 05:42:28 UTC: ERROR : CatalystError: Stage build aborting due to error.
27 Dec 2017 05:42:28 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1437, in run
getattr(self, x)()
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1346, in run_local
print_traceback=False)
CatalystError
27 Dec 2017 05:42:28 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
518.53user 118.78system 10:24.35elapsed 102%CPU (0avgtext+0avgdata 321824maxresident)k
2112inputs+4281872outputs (0major+43186410minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20171227T030001Z.8P6Vha/log/stage3.log
^ permalink raw reply [flat|nested] 25+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - stage3.spec
@ 2017-12-27 23:08 catalyst
0 siblings, 0 replies; 25+ messages in thread
From: catalyst @ 2017-12-27 23:08 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /release/buildroot/x86-dev/tmp/default/stage3-i486-20171227T214502Z/tmp
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/default/stage3-i486-20171227T214502Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
setarch linux32 chroot /release/buildroot/x86-dev/tmp/default/stage3-i486-20171227T214502Z /tmp/stage3-chroot.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 20) app-misc/mime-types-9::gentoo
>>> Installing (1 of 20) app-misc/mime-types-9::gentoo
>>> Emerging (2 of 20) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (2 of 20) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging (3 of 20) sys-apps/install-xattr-0.5::gentoo
>>> Emerging (4 of 20) sys-apps/debianutils-4.7::gentoo
>>> Emerging (5 of 20) app-arch/unzip-6.0_p20::gentoo
>>> Emerging (6 of 20) sys-libs/gdbm-1.11::gentoo
>>> Installing (5 of 20) app-arch/unzip-6.0_p20::gentoo
>>> Installing (3 of 20) sys-apps/install-xattr-0.5::gentoo
>>> Installing (4 of 20) sys-apps/debianutils-4.7::gentoo
>>> Installing (6 of 20) sys-libs/gdbm-1.11::gentoo
>>> Emerging (7 of 20) sys-apps/attr-2.4.47-r2::gentoo
>>> Installing (7 of 20) sys-apps/attr-2.4.47-r2::gentoo
>>> Emerging (8 of 20) dev-libs/openssl-1.0.2n::gentoo
>>> Installing (8 of 20) dev-libs/openssl-1.0.2n::gentoo
>>> Emerging (9 of 20) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Installing (9 of 20) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Emerging (10 of 20) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (10 of 20) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (11 of 20) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (11 of 20) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (12 of 20) dev-python/six-1.10.0::gentoo
>>> Installing (12 of 20) dev-python/six-1.10.0::gentoo
>>> Emerging (13 of 20) dev-python/pyblake2-0.9.3-r1::gentoo
>>> Installing (13 of 20) dev-python/pyblake2-0.9.3-r1::gentoo
>>> Emerging (14 of 20) dev-python/appdirs-1.4.3::gentoo
>>> Installing (14 of 20) dev-python/appdirs-1.4.3::gentoo
>>> Emerging (15 of 20) dev-python/pyparsing-2.2.0::gentoo
>>> Installing (15 of 20) dev-python/pyparsing-2.2.0::gentoo
>>> Emerging (16 of 20) dev-python/packaging-16.8::gentoo
>>> Installing (16 of 20) dev-python/packaging-16.8::gentoo
>>> Emerging (17 of 20) dev-python/setuptools-34.0.2-r1::gentoo
>>> Installing (17 of 20) dev-python/setuptools-34.0.2-r1::gentoo
>>> Emerging (18 of 20) dev-python/certifi-2017.4.17::gentoo
>>> Installing (18 of 20) dev-python/certifi-2017.4.17::gentoo
>>> Emerging (19 of 20) dev-python/pyxattr-0.5.5::gentoo
>>> Installing (19 of 20) dev-python/pyxattr-0.5.5::gentoo
>>> Emerging (20 of 20) sys-apps/portage-2.3.13-r1::gentoo
>>> Installing (20 of 20) sys-apps/portage-2.3.13-r1::gentoo
* Messages for package app-misc/ca-certificates-20161130.3.30.2:
* You should run update-ca-certificates manually after etc-update
* To prevent applications relying on system's trusted root certificate store
* from using CAs where at least one major browser vendor Gentoo is following
* has decided to apply trust level restrictions, the following
* certificate(s) were removed:
* mozilla/WoSign.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/CA_WoSign_ECC_Root.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign_China.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/Certification_Authority_of_WoSign_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_2.crt removed; see https://bugs.gentoo.org/598072 for details
* Messages for package dev-python/six-1.10.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyblake2-0.9.3-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/appdirs-1.4.3:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyparsing-2.2.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/packaging-16.8:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/setuptools-34.0.2-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/certifi-2017.4.17:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyxattr-0.5.5:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-apps/portage-2.3.13-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
emerge --quiet --usepkg --buildpkg --newuse -e --update --deep --with-bdeps=y @system
[nomerge ] sys-apps/grep-3.0::gentoo USE="nls* pcre* -static"
[nomerge ] dev-libs/libpcre-8.41-r1:3::gentoo USE="bzip2 cxx jit readline recursion-limit (unicode) zlib -libedit -pcre16 -pcre32 -static-libs"
[nomerge ] virtual/pkgconfig-0-r1::gentoo
[nomerge ] dev-util/pkgconfig-0.29.2::gentoo USE="-hardened -internal-glib*"
[nomerge ] dev-libs/glib-2.50.3-r1:2::gentoo USE="mime xattr -dbus -debug (-fam) (-selinux) -static-libs -systemtap {-test} -utils" PYTHON_TARGETS="python2_7"
[ebuild N ] x11-misc/shared-mime-info-1.8::gentoo USE="{-test}" 0 KiB
[ebuild R ] dev-util/pkgconfig-0.29.2::gentoo USE="-hardened -internal-glib*" 0 KiB
[ebuild N ] dev-libs/glib-2.50.3-r1:2::gentoo USE="mime xattr -dbus -debug (-fam) (-selinux) -static-libs -systemtap {-test} -utils" PYTHON_TARGETS="python2_7" 0 KiB
[ebuild N ] virtual/service-manager-0::gentoo USE="(-prefix)" 0 KiB
[nomerge ] sys-apps/openrc-0.34.11::gentoo USE="ncurses netifrc pam unicode -audit -debug -newnet (-prefix) (-selinux) -static-libs"
[ebuild N ] net-misc/netifrc-0.5.1::gentoo 0 KiB
[ebuild N ] sys-apps/openrc-0.34.11::gentoo USE="ncurses netifrc pam unicode -audit -debug -newnet (-prefix) (-selinux) -static-libs" 0 KiB
[ebuild N ] virtual/dev-manager-0::gentoo 0 KiB
[nomerge ] virtual/udev-217::gentoo USE="-systemd"
[ebuild N ] sys-fs/eudev-3.1.5::gentoo USE="hwdb kmod -introspection -rule-generator (-selinux) -static-libs {-test}" 0 KiB
[ebuild N ] sys-fs/udev-init-scripts-32::gentoo 0 KiB
[ebuild N ] sys-apps/hwids-20170328::gentoo USE="net pci udev usb" 0 KiB
[ebuild N ] virtual/udev-217::gentoo USE="-systemd" 0 KiB
[ebuild N ] virtual/ssh-0::gentoo USE="-minimal" 0 KiB
[ebuild N ] net-misc/openssh-7.5_p1-r3::gentoo USE="bindist hpn pam pie ssl -X -X509 -audit -debug -kerberos -ldap -ldns -libedit -libressl -livecd -sctp (-selinux) -skey -ssh1 -static {-test}" 0 KiB
[nomerge ] virtual/shadow-0::gentoo
[ebuild R ] sys-apps/shadow-4.5::gentoo USE="acl* nls* pam* xattr* -audit -cracklib (-selinux) -skey" LINGUAS="-cs -da -de -es -fi -fr -hu -id -it -ja -ko -pl -pt_BR -ru -sv -tr -zh_CN -zh_TW" 0 KiB
[nomerge ] sys-apps/util-linux-2.30.2::gentoo USE="cramfs ncurses nls pam readline suid unicode -build -caps -fdformat -kill -python (-selinux) -slang -static-libs -systemd {-test} -tty-helpers -udev" PYTHON_SINGLE_TARGET="python3_5 -python2_7 -python3_4 -python3_6" PYTHON_TARGETS="python2_7 python3_5 -python3_4 -python3_6"
[ebuild N ] sys-libs/pam-1.2.1-r2::gentoo USE="berkdb filecaps nls pie -audit -cracklib -debug -nis (-selinux) {-test}" 0 KiB
[ebuild N ] sys-auth/pambase-20150213-r1::gentoo USE="nullok sha512 -consolekit -cracklib -debug (-elogind) -gnome-keyring -minimal -mktemp -pam_krb5 -pam_ssh -passwdqc -securetty (-selinux) -systemd" 0 KiB
[ebuild N ] sys-apps/man-pages-4.09::gentoo USE="nls" L10N="-da -de -fr -it -ja -nl -pl -ro -ru -zh-CN" 0 KiB
[ebuild N ] sys-apps/man-pages-posix-2013a::gentoo 0 KiB
[ebuild N ] virtual/man-0-r1::gentoo 0 KiB
[ebuild N ] sys-apps/man-db-2.7.6.1-r2::gentoo USE="berkdb gdbm manpager nls zlib (-selinux) -static-libs" 0 KiB
[ebuild N ] app-text/po4a-0.47-r1::gentoo USE="{-test}" LINGUAS="-af -ca -cs -da -de -eo -es -et -eu -fr -hr -id -it -ja -kn -ko -nb -nl -pl -pt -pt_BR -ru -sl -sv -uk -vi -zh_CN -zh_HK" 0 KiB
[ebuild N ] app-text/docbook-xml-dtd-4.1.2-r6:4.1.2::gentoo 0 KiB
[ebuild N ] app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo USE="-ruby" 0 KiB
[ebuild N ] app-text/build-docbook-catalog-1.19.1::gentoo 0 KiB
[ebuild N ] sys-fs/e2fsprogs-1.43.6::gentoo USE="nls -fuse -static-libs" 0 KiB
[ebuild N ] sys-apps/util-linux-2.30.2::gentoo USE="cramfs ncurses nls pam readline suid unicode -build -caps -fdformat -kill -python (-selinux) -slang -static-libs -systemd {-test} -tty-helpers -udev" PYTHON_SINGLE_TARGET="python3_5 -python2_7 -python3_4 -python3_6" PYTHON_TARGETS="python2_7 python3_5 -python3_4 -python3_6" 0 KiB
[nomerge ] sys-apps/openrc-0.34.11::gentoo USE="ncurses netifrc pam unicode -audit -debug -newnet (-prefix) (-selinux) -static-libs"
[nomerge ] virtual/pam-0-r1::gentoo
[nomerge ] sys-libs/pam-1.2.1-r2::gentoo USE="berkdb filecaps nls pie -audit -cracklib -debug -nis (-selinux) {-test}"
[ebuild N ] sys-libs/libcap-2.24-r2::gentoo USE="pam -static-libs" 0 KiB
[ebuild N ] sys-apps/kbd-2.0.3::gentoo USE="nls pam {-test}" 0 KiB
[ebuild N ] virtual/pam-0-r1::gentoo 0 KiB
Total: 29 packages (27 new, 2 reinstalls), Size of downloads: 0 KiB
* Error: circular dependencies:
(sys-libs/pam-1.2.1-r2:0/0::gentoo, ebuild scheduled for merge) depends on
(sys-libs/libcap-2.24-r2:0/0::gentoo, ebuild scheduled for merge) (buildtime)
(virtual/pam-0-r1:0/0::gentoo, ebuild scheduled for merge) (buildtime)
(sys-libs/pam-1.2.1-r2:0/0::gentoo, ebuild scheduled for merge) (runtime)
It might be possible to break this cycle
by applying any of the following changes:
- sys-libs/pam-1.2.1-r2 (Change USE: -filecaps)
- sys-libs/libcap-2.24-r2 (Change USE: -pam)
Note that this change can be reverted, once the package has been installed.
27 Dec 2017 23:08:23 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
27 Dec 2017 23:08:23 UTC: ERROR : CatalystError: Stage build aborting due to error.
27 Dec 2017 23:08:23 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1350, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1450, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1359, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
27 Dec 2017 23:08:23 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
734.56user 153.42system 12:12.27elapsed 121%CPU (0avgtext+0avgdata 770960maxresident)k
37416inputs+3024888outputs (0major+43081162minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20171227T214502Z.zS8C2F/log/stage3.log
^ permalink raw reply [flat|nested] 25+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - stage3.spec
@ 2018-01-03 5:23 catalyst
0 siblings, 0 replies; 25+ messages in thread
From: catalyst @ 2018-01-03 5:23 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
* mozilla/WoSign_China.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/Certification_Authority_of_WoSign_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/CA_WoSign_ECC_Root.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign.crt removed; see https://bugs.gentoo.org/598072 for details
* Messages for package dev-python/six-1.10.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyblake2-0.9.3-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/appdirs-1.4.3:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyparsing-2.2.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/packaging-16.8:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/setuptools-34.0.2-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/certifi-2017.4.17:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyxattr-0.5.5:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-apps/portage-2.3.13-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
emerge --quiet --usepkg --buildpkg --newuse -e --update --deep --with-bdeps=y @system
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-libs/glibc-2.25-r9
>>> Running pre-merge checks for sys-devel/gcc-6.4.0
>>> Running pre-merge checks for sys-libs/pam-1.2.1-r2
>>> Running pre-merge checks for net-misc/openssh-7.5_p1-r3
>>> Running pre-merge checks for sys-fs/eudev-3.1.5
*
* As of 2013-01-29, eudev-3.1.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
>>> Emerging (1 of 187) virtual/libintl-0-r2::gentoo
>>> Installing (1 of 187) virtual/libintl-0-r2::gentoo
>>> Emerging (2 of 187) sys-libs/ncurses-6.0-r1::gentoo
>>> Installing (2 of 187) sys-libs/ncurses-6.0-r1::gentoo
>>> Emerging (3 of 187) dev-lang/python-exec-2.4.5::gentoo
>>> Installing (3 of 187) dev-lang/python-exec-2.4.5::gentoo
>>> Emerging (4 of 187) app-arch/bzip2-1.0.6-r8::gentoo
>>> Installing (4 of 187) app-arch/bzip2-1.0.6-r8::gentoo
>>> Emerging (5 of 187) sys-devel/gnuconfig-20161104::gentoo
>>> Installing (5 of 187) sys-devel/gnuconfig-20161104::gentoo
>>> Emerging (6 of 187) sys-apps/gentoo-functions-0.12::gentoo
>>> Installing (6 of 187) sys-apps/gentoo-functions-0.12::gentoo
>>> Emerging (7 of 187) virtual/libiconv-0-r2::gentoo
>>> Installing (7 of 187) virtual/libiconv-0-r2::gentoo
>>> Emerging binary (8 of 187) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (8 of 187) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging binary (9 of 187) app-misc/mime-types-9::gentoo
>>> Installing (9 of 187) app-misc/mime-types-9::gentoo
>>> Emerging (10 of 187) app-arch/gzip-1.8::gentoo
>>> Installing (10 of 187) app-arch/gzip-1.8::gentoo
>>> Emerging binary (11 of 187) sys-apps/debianutils-4.7::gentoo
>>> Installing (11 of 187) sys-apps/debianutils-4.7::gentoo
>>> Emerging (12 of 187) net-libs/libmnl-1.0.4::gentoo
>>> Installing (12 of 187) net-libs/libmnl-1.0.4::gentoo
>>> Emerging (13 of 187) app-misc/editor-wrapper-4::gentoo
>>> Installing (13 of 187) app-misc/editor-wrapper-4::gentoo
>>> Emerging (14 of 187) app-text/manpager-1::gentoo
>>> Installing (14 of 187) app-text/manpager-1::gentoo
>>> Emerging (15 of 187) sys-apps/opentmpfiles-0.1.3::gentoo
>>> Failed to emerge sys-apps/opentmpfiles-0.1.3, Log file:
>>> '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/build.log'
* Package: sys-apps/opentmpfiles-0.1.3
* Repository: gentoo
* Maintainer: williamh@gentoo.org openrc@gentoo.org
* USE: abi_x86_32 elibc_glibc kernel_linux userland_GNU x86
* FEATURES: preserve-libs sandbox userpriv usersandbox
gzip: error while loading shared libraries: cannot make segment writable for relocation: Permission denied
tar: This does not look like a tar archive
tar: Exiting with failure status due to previous errors
* ERROR: sys-apps/opentmpfiles-0.1.3::gentoo failed (unpack phase):
* unpack: failure unpacking opentmpfiles-0.1.3.tar.gz
*
* Call stack:
* ebuild.sh, line 124: Called src_unpack
* environment, line 396: Called default
* phase-functions.sh, line 853: Called default_src_unpack
* phase-functions.sh, line 880: Called __eapi0_src_unpack
* phase-helpers.sh, line 739: Called unpack 'opentmpfiles-0.1.3.tar.gz'
* phase-helpers.sh, line 386: Called __unpack_tar 'gzip -d'
* phase-helpers.sh, line 317: Called __assert_sigpipe_ok 'unpack: failure unpacking opentmpfiles-0.1.3.tar.gz'
* isolated-functions.sh, line 41: Called __helpers_die 'unpack: failure unpacking opentmpfiles-0.1.3.tar.gz'
* isolated-functions.sh, line 117: Called die
* The specific snippet of code:
* die "$@"
*
* If you need support, post the output of `emerge --info '=sys-apps/opentmpfiles-0.1.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/opentmpfiles-0.1.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/work'
* S: '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/work/opentmpfiles-0.1.3'
* Messages for package sys-fs/eudev-3.1.5:
*
* As of 2013-01-29, eudev-3.1.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package sys-apps/opentmpfiles-0.1.3:
* ERROR: sys-apps/opentmpfiles-0.1.3::gentoo failed (unpack phase):
* unpack: failure unpacking opentmpfiles-0.1.3.tar.gz
*
* Call stack:
* ebuild.sh, line 124: Called src_unpack
* environment, line 396: Called default
* phase-functions.sh, line 853: Called default_src_unpack
* phase-functions.sh, line 880: Called __eapi0_src_unpack
* phase-helpers.sh, line 739: Called unpack 'opentmpfiles-0.1.3.tar.gz'
* phase-helpers.sh, line 386: Called __unpack_tar 'gzip -d'
* phase-helpers.sh, line 317: Called __assert_sigpipe_ok 'unpack: failure unpacking opentmpfiles-0.1.3.tar.gz'
* isolated-functions.sh, line 41: Called __helpers_die 'unpack: failure unpacking opentmpfiles-0.1.3.tar.gz'
* isolated-functions.sh, line 117: Called die
* The specific snippet of code:
* die "$@"
*
* If you need support, post the output of `emerge --info '=sys-apps/opentmpfiles-0.1.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/opentmpfiles-0.1.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/work'
* S: '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/work/opentmpfiles-0.1.3'
03 Jan 2018 05:23:13 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
03 Jan 2018 05:23:14 UTC: ERROR : CatalystError: Stage build aborting due to error.
03 Jan 2018 05:23:14 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.5/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
03 Jan 2018 05:23:14 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
675.04user 164.25system 14:13.50elapsed 98%CPU (0avgtext+0avgdata 322316maxresident)k
664inputs+4600632outputs (0major+65921603minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20180103T030001Z.ZmsWDZ/log/stage3.log
^ permalink raw reply [flat|nested] 25+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - stage3.spec
@ 2018-01-10 3:43 catalyst
0 siblings, 0 replies; 25+ messages in thread
From: catalyst @ 2018-01-10 3:43 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
copying stage3-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180110T030001Z/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180110T030001Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180110T030001Z /tmp/stage3-chroot.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
[binary N ] app-misc/mime-types-9
[binary N ] app-misc/c_rehash-1.7-r1
[binary N ] sys-apps/install-xattr-0.5
[binary N ] sys-apps/attr-2.4.47-r2
[ebuild N ] sys-apps/debianutils-4.8.3
[ebuild N ] app-portage/elt-patches-20170815
[binary N ] app-misc/ca-certificates-20161130.3.30.2
[binary N ] dev-libs/openssl-1.0.2n
[ebuild N ] sys-libs/gdbm-1.13-r2
[ebuild R ] dev-lang/python-2.7.14-r1
[ebuild R ] dev-lang/python-3.5.4-r1
[binary N ] dev-python/pyxattr-0.5.5
[binary N ] dev-python/pyblake2-0.9.3-r1
[ebuild R ] sys-apps/portage-2.3.13-r1
>>> Verifying ebuild manifests
>>> Emerging binary (1 of 14) app-misc/mime-types-9::gentoo
>>> Installing (1 of 14) app-misc/mime-types-9::gentoo
>>> Emerging binary (2 of 14) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (2 of 14) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging binary (3 of 14) sys-apps/install-xattr-0.5::gentoo
>>> Installing (3 of 14) sys-apps/install-xattr-0.5::gentoo
>>> Emerging binary (4 of 14) sys-apps/attr-2.4.47-r2::gentoo
>>> Installing (4 of 14) sys-apps/attr-2.4.47-r2::gentoo
>>> Emerging (5 of 14) sys-apps/debianutils-4.8.3::gentoo
>>> Installing (5 of 14) sys-apps/debianutils-4.8.3::gentoo
>>> Emerging (6 of 14) app-portage/elt-patches-20170815::gentoo
>>> Installing (6 of 14) app-portage/elt-patches-20170815::gentoo
>>> Emerging binary (7 of 14) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Installing (7 of 14) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Emerging binary (8 of 14) dev-libs/openssl-1.0.2n::gentoo
>>> Installing (8 of 14) dev-libs/openssl-1.0.2n::gentoo
>>> Emerging (9 of 14) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (9 of 14) sys-libs/gdbm-1.13-r2::gentoo
>>> Emerging (10 of 14) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (10 of 14) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (11 of 14) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (11 of 14) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging binary (12 of 14) dev-python/pyxattr-0.5.5::gentoo
>>> Installing (12 of 14) dev-python/pyxattr-0.5.5::gentoo
>>> Emerging binary (13 of 14) dev-python/pyblake2-0.9.3-r1::gentoo
>>> Installing (13 of 14) dev-python/pyblake2-0.9.3-r1::gentoo
>>> Emerging (14 of 14) sys-apps/portage-2.3.13-r1::gentoo
>>> Installing (14 of 14) sys-apps/portage-2.3.13-r1::gentoo
* Messages for package app-misc/ca-certificates-20161130.3.30.2:
* You should run update-ca-certificates manually after etc-update
* Messages for package sys-apps/portage-2.3.13-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
emerge --quiet --usepkg --buildpkg --newuse -e --update --deep --with-bdeps=y @system
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-libs/glibc-2.25-r9
>>> Running pre-merge checks for sys-devel/gcc-6.4.0
>>> Running pre-merge checks for sys-libs/pam-1.2.1-r2
>>> Running pre-merge checks for net-misc/openssh-7.5_p1-r3
>>> Running pre-merge checks for sys-fs/eudev-3.1.5
*
* As of 2013-01-29, eudev-3.1.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
>>> Emerging binary (1 of 187) virtual/libintl-0-r2::gentoo
>>> Installing (1 of 187) virtual/libintl-0-r2::gentoo
>>> Emerging binary (2 of 187) sys-libs/ncurses-6.0-r1::gentoo
>>> Installing (2 of 187) sys-libs/ncurses-6.0-r1::gentoo
>>> Emerging binary (3 of 187) dev-lang/python-exec-2.4.5::gentoo
>>> Installing (3 of 187) dev-lang/python-exec-2.4.5::gentoo
>>> Emerging binary (4 of 187) app-arch/bzip2-1.0.6-r8::gentoo
>>> Installing (4 of 187) app-arch/bzip2-1.0.6-r8::gentoo
>>> Emerging binary (5 of 187) sys-devel/gnuconfig-20161104::gentoo
>>> Installing (5 of 187) sys-devel/gnuconfig-20161104::gentoo
>>> Emerging binary (6 of 187) sys-apps/gentoo-functions-0.12::gentoo
>>> Installing (6 of 187) sys-apps/gentoo-functions-0.12::gentoo
>>> Emerging binary (7 of 187) virtual/libiconv-0-r2::gentoo
>>> Installing (7 of 187) virtual/libiconv-0-r2::gentoo
>>> Emerging binary (8 of 187) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (8 of 187) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging binary (9 of 187) app-misc/mime-types-9::gentoo
>>> Installing (9 of 187) app-misc/mime-types-9::gentoo
>>> Emerging binary (10 of 187) app-arch/gzip-1.8::gentoo
>>> Installing (10 of 187) app-arch/gzip-1.8::gentoo
>>> Emerging binary (11 of 187) app-misc/editor-wrapper-4::gentoo
>>> Installing (11 of 187) app-misc/editor-wrapper-4::gentoo
>>> Emerging binary (12 of 187) net-libs/libmnl-1.0.4::gentoo
>>> Installing (12 of 187) net-libs/libmnl-1.0.4::gentoo
>>> Emerging binary (13 of 187) sys-apps/debianutils-4.8.3::gentoo
>>> Installing (13 of 187) sys-apps/debianutils-4.8.3::gentoo
>>> Emerging binary (14 of 187) app-text/manpager-1::gentoo
>>> Installing (14 of 187) app-text/manpager-1::gentoo
>>> Emerging binary (15 of 187) sys-apps/install-xattr-0.5::gentoo
>>> Installing (15 of 187) sys-apps/install-xattr-0.5::gentoo
>>> Emerging (16 of 187) sys-apps/opentmpfiles-0.1.3::gentoo
>>> Failed to emerge sys-apps/opentmpfiles-0.1.3, Log file:
>>> '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/build.log'
* Package: sys-apps/opentmpfiles-0.1.3
* Repository: gentoo
* Maintainer: williamh@gentoo.org openrc@gentoo.org
* USE: abi_x86_32 elibc_glibc kernel_linux userland_GNU x86
* FEATURES: preserve-libs sandbox userpriv usersandbox
gzip: error while loading shared libraries: cannot make segment writable for relocation: Permission denied
tar: This does not look like a tar archive
tar: Exiting with failure status due to previous errors
* ERROR: sys-apps/opentmpfiles-0.1.3::gentoo failed (unpack phase):
* unpack: failure unpacking opentmpfiles-0.1.3.tar.gz
*
* Call stack:
* ebuild.sh, line 124: Called src_unpack
* environment, line 396: Called default
* phase-functions.sh, line 853: Called default_src_unpack
* phase-functions.sh, line 880: Called __eapi0_src_unpack
* phase-helpers.sh, line 739: Called unpack 'opentmpfiles-0.1.3.tar.gz'
* phase-helpers.sh, line 386: Called __unpack_tar 'gzip -d'
* phase-helpers.sh, line 317: Called __assert_sigpipe_ok 'unpack: failure unpacking opentmpfiles-0.1.3.tar.gz'
* isolated-functions.sh, line 41: Called __helpers_die 'unpack: failure unpacking opentmpfiles-0.1.3.tar.gz'
* isolated-functions.sh, line 117: Called die
* The specific snippet of code:
* die "$@"
*
* If you need support, post the output of `emerge --info '=sys-apps/opentmpfiles-0.1.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/opentmpfiles-0.1.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/work'
* S: '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/work/opentmpfiles-0.1.3'
* Messages for package sys-fs/eudev-3.1.5:
*
* As of 2013-01-29, eudev-3.1.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package sys-apps/opentmpfiles-0.1.3:
* ERROR: sys-apps/opentmpfiles-0.1.3::gentoo failed (unpack phase):
* unpack: failure unpacking opentmpfiles-0.1.3.tar.gz
*
* Call stack:
* ebuild.sh, line 124: Called src_unpack
* environment, line 396: Called default
* phase-functions.sh, line 853: Called default_src_unpack
* phase-functions.sh, line 880: Called __eapi0_src_unpack
* phase-helpers.sh, line 739: Called unpack 'opentmpfiles-0.1.3.tar.gz'
* phase-helpers.sh, line 386: Called __unpack_tar 'gzip -d'
* phase-helpers.sh, line 317: Called __assert_sigpipe_ok 'unpack: failure unpacking opentmpfiles-0.1.3.tar.gz'
* isolated-functions.sh, line 41: Called __helpers_die 'unpack: failure unpacking opentmpfiles-0.1.3.tar.gz'
* isolated-functions.sh, line 117: Called die
* The specific snippet of code:
* die "$@"
*
* If you need support, post the output of `emerge --info '=sys-apps/opentmpfiles-0.1.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/opentmpfiles-0.1.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/work'
* S: '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/work/opentmpfiles-0.1.3'
10 Jan 2018 03:43:54 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
10 Jan 2018 03:43:54 UTC: ERROR : CatalystError: Stage build aborting due to error.
10 Jan 2018 03:43:54 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.5/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
10 Jan 2018 03:43:54 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
354.53user 76.97system 6:59.26elapsed 102%CPU (0avgtext+0avgdata 322168maxresident)k
176inputs+3633432outputs (0major+24587017minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20180110T030001Z.fhFJnt/log/stage3.log
^ permalink raw reply [flat|nested] 25+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - stage3.spec
@ 2018-01-17 5:14 catalyst
0 siblings, 0 replies; 25+ messages in thread
From: catalyst @ 2018-01-17 5:14 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
17 Jan 2018 05:12:09 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
17 Jan 2018 05:12:09 UTC: NOTICE : conf_values[options] = {'pkgcache', 'bindist', 'clear-autoresume', 'preserve_libs'}
17 Jan 2018 05:12:09 UTC: NOTICE : Processing spec file: stage3.spec
17 Jan 2018 05:12:09 UTC: NOTICE : Using target: stage3
17 Jan 2018 05:12:09 UTC: NOTICE : Source file specification matching setting is: loose
17 Jan 2018 05:12:09 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
17 Jan 2018 05:12:10 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage2-i486-20180117T030002Z.tar.xz
17 Jan 2018 05:12:10 UTC: NOTICE : --- Running action sequence: unpack
17 Jan 2018 05:12:10 UTC: NOTICE : Clearing the chroot path ...
17 Jan 2018 05:12:10 UTC: NOTICE : Emptying directory: /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180117T030002Z
17 Jan 2018 05:12:10 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage2-i486-20180117T030002Z.tar.xz
17 Jan 2018 05:12:10 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180117T030002Z (this may take some time) ..
17 Jan 2018 05:12:11 UTC: NOTICE : --- Running action sequence: unpack_snapshot
17 Jan 2018 05:12:11 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
17 Jan 2018 05:12:24 UTC: NOTICE : --- Running action sequence: setup_confdir
17 Jan 2018 05:12:24 UTC: NOTICE : --- Running action sequence: portage_overlay
17 Jan 2018 05:12:24 UTC: NOTICE : --- Running action sequence: base_dirs
17 Jan 2018 05:12:24 UTC: NOTICE : --- Running action sequence: bind
17 Jan 2018 05:12:24 UTC: NOTICE : --- Running action sequence: chroot_setup
17 Jan 2018 05:12:24 UTC: NOTICE : Setting up chroot...
17 Jan 2018 05:12:24 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
17 Jan 2018 05:12:24 UTC: WARNING : If your build fails look here first as the possible problem.
17 Jan 2018 05:12:24 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
17 Jan 2018 05:12:24 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
17 Jan 2018 05:12:24 UTC: WARNING : You have been warned.
17 Jan 2018 05:12:24 UTC: NOTICE : Writing the stage make.conf to: /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180117T030002Z/etc/portage/make.conf
17 Jan 2018 05:12:24 UTC: NOTICE : STICKY-CONFIG is enabled
17 Jan 2018 05:12:24 UTC: NOTICE : --- Running action sequence: setup_environment
17 Jan 2018 05:12:24 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180117T030002Z/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180117T030002Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180117T030002Z /tmp/stage3-chroot.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Emerging binary (1 of 5) sys-apps/install-xattr-0.5::gentoo
>>> Installing (1 of 5) sys-apps/install-xattr-0.5::gentoo
>>> Emerging binary (2 of 5) sys-apps/attr-2.4.47-r2::gentoo
>>> Installing (2 of 5) sys-apps/attr-2.4.47-r2::gentoo
>>> Emerging binary (3 of 5) dev-python/pyblake2-0.9.3-r1::gentoo
>>> Installing (3 of 5) dev-python/pyblake2-0.9.3-r1::gentoo
>>> Emerging binary (4 of 5) dev-python/pyxattr-0.5.5::gentoo
>>> Installing (4 of 5) dev-python/pyxattr-0.5.5::gentoo
>>> Emerging binary (5 of 5) sys-apps/portage-2.3.13-r1::gentoo
>>> Installing (5 of 5) sys-apps/portage-2.3.13-r1::gentoo
emerge --quiet --usepkg --buildpkg --newuse -e --update --deep --with-bdeps=y @system
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-libs/glibc-2.25-r9
>>> Running pre-merge checks for sys-devel/gcc-6.4.0-r1
>>> Running pre-merge checks for sys-libs/pam-1.2.1-r2
>>> Running pre-merge checks for net-misc/openssh-7.5_p1-r3
>>> Running pre-merge checks for sys-fs/eudev-3.1.5
*
* As of 2013-01-29, eudev-3.1.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
>>> Emerging binary (1 of 187) virtual/libintl-0-r2::gentoo
>>> Installing (1 of 187) virtual/libintl-0-r2::gentoo
>>> Emerging binary (2 of 187) sys-libs/ncurses-6.0-r1::gentoo
>>> Installing (2 of 187) sys-libs/ncurses-6.0-r1::gentoo
>>> Emerging binary (3 of 187) dev-lang/python-exec-2.4.5::gentoo
>>> Installing (3 of 187) dev-lang/python-exec-2.4.5::gentoo
>>> Emerging binary (4 of 187) app-arch/bzip2-1.0.6-r8::gentoo
>>> Installing (4 of 187) app-arch/bzip2-1.0.6-r8::gentoo
>>> Emerging (5 of 187) sys-devel/gnuconfig-20170101::gentoo
>>> Installing (5 of 187) sys-devel/gnuconfig-20170101::gentoo
>>> Emerging binary (6 of 187) sys-apps/gentoo-functions-0.12::gentoo
>>> Installing (6 of 187) sys-apps/gentoo-functions-0.12::gentoo
>>> Emerging binary (7 of 187) virtual/libiconv-0-r2::gentoo
>>> Installing (7 of 187) virtual/libiconv-0-r2::gentoo
>>> Emerging binary (8 of 187) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (8 of 187) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging binary (9 of 187) app-misc/mime-types-9::gentoo
>>> Installing (9 of 187) app-misc/mime-types-9::gentoo
>>> Emerging binary (10 of 187) app-arch/gzip-1.8::gentoo
>>> Installing (10 of 187) app-arch/gzip-1.8::gentoo
>>> Emerging binary (11 of 187) sys-apps/debianutils-4.8.3::gentoo
>>> Installing (11 of 187) sys-apps/debianutils-4.8.3::gentoo
>>> Emerging binary (12 of 187) app-misc/editor-wrapper-4::gentoo
>>> Installing (12 of 187) app-misc/editor-wrapper-4::gentoo
>>> Emerging binary (13 of 187) net-libs/libmnl-1.0.4::gentoo
>>> Installing (13 of 187) net-libs/libmnl-1.0.4::gentoo
>>> Emerging (14 of 187) sys-apps/opentmpfiles-0.1.3::gentoo
>>> Failed to emerge sys-apps/opentmpfiles-0.1.3, Log file:
>>> '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/build.log'
* Package: sys-apps/opentmpfiles-0.1.3
* Repository: gentoo
* USE: abi_x86_32 elibc_glibc kernel_linux userland_GNU x86
* FEATURES: preserve-libs sandbox userpriv usersandbox
gzip: error while loading shared libraries: cannot make segment writable for relocation: Permission denied
tar: This does not look like a tar archive
tar: Exiting with failure status due to previous errors
* ERROR: sys-apps/opentmpfiles-0.1.3::gentoo failed (unpack phase):
* unpack: failure unpacking opentmpfiles-0.1.3.tar.gz
*
* Call stack:
* ebuild.sh, line 124: Called src_unpack
* environment, line 395: Called default
* phase-functions.sh, line 853: Called default_src_unpack
* phase-functions.sh, line 880: Called __eapi0_src_unpack
* phase-helpers.sh, line 739: Called unpack 'opentmpfiles-0.1.3.tar.gz'
* phase-helpers.sh, line 386: Called __unpack_tar 'gzip -d'
* phase-helpers.sh, line 317: Called __assert_sigpipe_ok 'unpack: failure unpacking opentmpfiles-0.1.3.tar.gz'
* isolated-functions.sh, line 41: Called __helpers_die 'unpack: failure unpacking opentmpfiles-0.1.3.tar.gz'
* isolated-functions.sh, line 117: Called die
* The specific snippet of code:
* die "$@"
*
* If you need support, post the output of `emerge --info '=sys-apps/opentmpfiles-0.1.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/opentmpfiles-0.1.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/work'
* S: '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/work/opentmpfiles-0.1.3'
* Messages for package sys-fs/eudev-3.1.5:
*
* As of 2013-01-29, eudev-3.1.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package sys-apps/opentmpfiles-0.1.3:
* ERROR: sys-apps/opentmpfiles-0.1.3::gentoo failed (unpack phase):
* unpack: failure unpacking opentmpfiles-0.1.3.tar.gz
*
* Call stack:
* ebuild.sh, line 124: Called src_unpack
* environment, line 395: Called default
* phase-functions.sh, line 853: Called default_src_unpack
* phase-functions.sh, line 880: Called __eapi0_src_unpack
* phase-helpers.sh, line 739: Called unpack 'opentmpfiles-0.1.3.tar.gz'
* phase-helpers.sh, line 386: Called __unpack_tar 'gzip -d'
* phase-helpers.sh, line 317: Called __assert_sigpipe_ok 'unpack: failure unpacking opentmpfiles-0.1.3.tar.gz'
* isolated-functions.sh, line 41: Called __helpers_die 'unpack: failure unpacking opentmpfiles-0.1.3.tar.gz'
* isolated-functions.sh, line 117: Called die
* The specific snippet of code:
* die "$@"
*
* If you need support, post the output of `emerge --info '=sys-apps/opentmpfiles-0.1.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/opentmpfiles-0.1.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/work'
* S: '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/work/opentmpfiles-0.1.3'
17 Jan 2018 05:14:09 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
17 Jan 2018 05:14:09 UTC: ERROR : CatalystError: Stage build aborting due to error.
17 Jan 2018 05:14:09 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.5/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
17 Jan 2018 05:14:09 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
65.17user 24.09system 2:00.09elapsed 74%CPU (0avgtext+0avgdata 317824maxresident)k
40inputs+2288440outputs (0major+3167156minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20180117T030002Z.b0Bo3R/log/stage3.log
^ permalink raw reply [flat|nested] 25+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - stage3.spec
@ 2018-01-31 5:39 catalyst
0 siblings, 0 replies; 25+ messages in thread
From: catalyst @ 2018-01-31 5:39 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
31 Jan 2018 05:36:27 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
31 Jan 2018 05:36:27 UTC: WARNING : If your build fails look here first as the possible problem.
31 Jan 2018 05:36:27 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
31 Jan 2018 05:36:27 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
31 Jan 2018 05:36:27 UTC: WARNING : You have been warned.
31 Jan 2018 05:36:27 UTC: NOTICE : Writing the stage make.conf to: /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180131T042040Z/etc/portage/make.conf
31 Jan 2018 05:36:27 UTC: NOTICE : STICKY-CONFIG is enabled
31 Jan 2018 05:36:27 UTC: NOTICE : --- Running action sequence: setup_environment
31 Jan 2018 05:36:27 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180131T042040Z/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180131T042040Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180131T042040Z /tmp/stage3-chroot.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging binary (1 of 13) app-misc/mime-types-9::gentoo
>>> Installing (1 of 13) app-misc/mime-types-9::gentoo
>>> Emerging binary (2 of 13) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (2 of 13) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging binary (3 of 13) sys-apps/install-xattr-0.5::gentoo
>>> Installing (3 of 13) sys-apps/install-xattr-0.5::gentoo
>>> Emerging binary (4 of 13) sys-apps/debianutils-4.8.3::gentoo
>>> Installing (4 of 13) sys-apps/debianutils-4.8.3::gentoo
>>> Emerging binary (5 of 13) sys-apps/attr-2.4.47-r2::gentoo
>>> Installing (5 of 13) sys-apps/attr-2.4.47-r2::gentoo
>>> Emerging binary (6 of 13) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Installing (6 of 13) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Emerging binary (7 of 13) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (7 of 13) sys-libs/gdbm-1.13-r2::gentoo
>>> Emerging binary (8 of 13) dev-libs/openssl-1.0.2n::gentoo
>>> Installing (8 of 13) dev-libs/openssl-1.0.2n::gentoo
>>> Emerging binary (9 of 13) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (9 of 13) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging binary (10 of 13) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (10 of 13) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging binary (11 of 13) dev-python/pyxattr-0.5.5::gentoo
>>> Installing (11 of 13) dev-python/pyxattr-0.5.5::gentoo
>>> Emerging (12 of 13) dev-python/pyblake2-1.1.0::gentoo
>>> Installing (12 of 13) dev-python/pyblake2-1.1.0::gentoo
>>> Emerging (13 of 13) sys-apps/portage-2.3.21::gentoo
>>> Installing (13 of 13) sys-apps/portage-2.3.21::gentoo
* Messages for package app-misc/ca-certificates-20161130.3.30.2:
* You should run update-ca-certificates manually after etc-update
* Messages for package dev-python/pyblake2-1.1.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-apps/portage-2.3.21:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
emerge --quiet --usepkg --buildpkg --newuse -e --update --deep --with-bdeps=y @system
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-libs/glibc-2.25-r9
>>> Running pre-merge checks for sys-devel/gcc-6.4.0-r1
>>> Running pre-merge checks for sys-libs/pam-1.2.1-r2
>>> Running pre-merge checks for net-misc/openssh-7.5_p1-r4
>>> Running pre-merge checks for sys-fs/eudev-3.2.5
*
* As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
>>> Emerging binary (1 of 187) virtual/libintl-0-r2::gentoo
>>> Installing (1 of 187) virtual/libintl-0-r2::gentoo
>>> Emerging binary (2 of 187) sys-libs/ncurses-6.0-r1::gentoo
>>> Installing (2 of 187) sys-libs/ncurses-6.0-r1::gentoo
>>> Emerging binary (3 of 187) dev-lang/python-exec-2.4.5::gentoo
>>> Installing (3 of 187) dev-lang/python-exec-2.4.5::gentoo
>>> Emerging binary (4 of 187) app-arch/bzip2-1.0.6-r8::gentoo
>>> Installing (4 of 187) app-arch/bzip2-1.0.6-r8::gentoo
>>> Emerging binary (5 of 187) sys-devel/gnuconfig-20170101::gentoo
>>> Installing (5 of 187) sys-devel/gnuconfig-20170101::gentoo
>>> Emerging binary (6 of 187) sys-apps/gentoo-functions-0.12::gentoo
>>> Installing (6 of 187) sys-apps/gentoo-functions-0.12::gentoo
>>> Emerging binary (7 of 187) virtual/libiconv-0-r2::gentoo
>>> Installing (7 of 187) virtual/libiconv-0-r2::gentoo
>>> Emerging binary (8 of 187) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (8 of 187) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging binary (9 of 187) app-misc/mime-types-9::gentoo
>>> Installing (9 of 187) app-misc/mime-types-9::gentoo
>>> Emerging binary (10 of 187) app-arch/gzip-1.8::gentoo
>>> Installing (10 of 187) app-arch/gzip-1.8::gentoo
>>> Emerging binary (11 of 187) sys-apps/debianutils-4.8.3::gentoo
>>> Installing (11 of 187) sys-apps/debianutils-4.8.3::gentoo
>>> Emerging binary (12 of 187) net-libs/libmnl-1.0.4::gentoo
>>> Installing (12 of 187) net-libs/libmnl-1.0.4::gentoo
>>> Emerging binary (13 of 187) app-misc/editor-wrapper-4::gentoo
>>> Installing (13 of 187) app-misc/editor-wrapper-4::gentoo
>>> Emerging binary (14 of 187) sys-apps/install-xattr-0.5::gentoo
>>> Installing (14 of 187) sys-apps/install-xattr-0.5::gentoo
>>> Emerging binary (15 of 187) app-text/manpager-1::gentoo
>>> Installing (15 of 187) app-text/manpager-1::gentoo
>>> Emerging (16 of 187) sys-apps/opentmpfiles-0.1.3::gentoo
>>> Failed to emerge sys-apps/opentmpfiles-0.1.3, Log file:
>>> '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/build.log'
* Package: sys-apps/opentmpfiles-0.1.3
* Repository: gentoo
* Maintainer: williamh@gentoo.org openrc@gentoo.org
* USE: abi_x86_32 elibc_glibc kernel_linux userland_GNU x86
* FEATURES: preserve-libs sandbox userpriv usersandbox
gzip: error while loading shared libraries: cannot make segment writable for relocation: Permission denied
tar: This does not look like a tar archive
tar: Exiting with failure status due to previous errors
* ERROR: sys-apps/opentmpfiles-0.1.3::gentoo failed (unpack phase):
* unpack: failure unpacking opentmpfiles-0.1.3.tar.gz
*
* Call stack:
* ebuild.sh, line 124: Called src_unpack
* environment, line 396: Called default
* phase-functions.sh, line 853: Called default_src_unpack
* phase-functions.sh, line 880: Called __eapi0_src_unpack
* phase-helpers.sh, line 740: Called unpack 'opentmpfiles-0.1.3.tar.gz'
* phase-helpers.sh, line 387: Called __unpack_tar 'gzip -d'
* phase-helpers.sh, line 318: Called __assert_sigpipe_ok 'unpack: failure unpacking opentmpfiles-0.1.3.tar.gz'
* isolated-functions.sh, line 41: Called __helpers_die 'unpack: failure unpacking opentmpfiles-0.1.3.tar.gz'
* isolated-functions.sh, line 117: Called die
* The specific snippet of code:
* die "$@"
*
* If you need support, post the output of `emerge --info '=sys-apps/opentmpfiles-0.1.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/opentmpfiles-0.1.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/work'
* S: '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/work/opentmpfiles-0.1.3'
* Messages for package sys-fs/eudev-3.2.5:
*
* As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package sys-apps/opentmpfiles-0.1.3:
* ERROR: sys-apps/opentmpfiles-0.1.3::gentoo failed (unpack phase):
* unpack: failure unpacking opentmpfiles-0.1.3.tar.gz
*
* Call stack:
* ebuild.sh, line 124: Called src_unpack
* environment, line 396: Called default
* phase-functions.sh, line 853: Called default_src_unpack
* phase-functions.sh, line 880: Called __eapi0_src_unpack
* phase-helpers.sh, line 740: Called unpack 'opentmpfiles-0.1.3.tar.gz'
* phase-helpers.sh, line 387: Called __unpack_tar 'gzip -d'
* phase-helpers.sh, line 318: Called __assert_sigpipe_ok 'unpack: failure unpacking opentmpfiles-0.1.3.tar.gz'
* isolated-functions.sh, line 41: Called __helpers_die 'unpack: failure unpacking opentmpfiles-0.1.3.tar.gz'
* isolated-functions.sh, line 117: Called die
* The specific snippet of code:
* die "$@"
*
* If you need support, post the output of `emerge --info '=sys-apps/opentmpfiles-0.1.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/opentmpfiles-0.1.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/work'
* S: '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/work/opentmpfiles-0.1.3'
31 Jan 2018 05:39:34 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
31 Jan 2018 05:39:34 UTC: ERROR : CatalystError: Stage build aborting due to error.
31 Jan 2018 05:39:34 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.5/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
31 Jan 2018 05:39:34 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
106.58user 46.20system 3:24.44elapsed 74%CPU (0avgtext+0avgdata 322356maxresident)k
5792inputs+2818288outputs (0major+6096325minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20180131T042040Z.xelFr2/log/stage3.log
^ permalink raw reply [flat|nested] 25+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - stage3.spec
@ 2018-02-07 5:21 catalyst
0 siblings, 0 replies; 25+ messages in thread
From: catalyst @ 2018-02-07 5:21 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
07 Feb 2018 05:17:40 UTC: NOTICE : --- Running action sequence: unpack_snapshot
07 Feb 2018 05:17:40 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
07 Feb 2018 05:17:49 UTC: NOTICE : --- Running action sequence: setup_confdir
07 Feb 2018 05:17:49 UTC: NOTICE : --- Running action sequence: portage_overlay
07 Feb 2018 05:17:49 UTC: NOTICE : --- Running action sequence: base_dirs
07 Feb 2018 05:17:49 UTC: NOTICE : --- Running action sequence: bind
07 Feb 2018 05:17:49 UTC: NOTICE : --- Running action sequence: chroot_setup
07 Feb 2018 05:17:49 UTC: NOTICE : Setting up chroot...
07 Feb 2018 05:17:49 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
07 Feb 2018 05:17:49 UTC: WARNING : If your build fails look here first as the possible problem.
07 Feb 2018 05:17:49 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
07 Feb 2018 05:17:49 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
07 Feb 2018 05:17:49 UTC: WARNING : You have been warned.
07 Feb 2018 05:17:49 UTC: NOTICE : Writing the stage make.conf to: /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180207T030003Z/etc/portage/make.conf
07 Feb 2018 05:17:49 UTC: NOTICE : STICKY-CONFIG is enabled
07 Feb 2018 05:17:49 UTC: NOTICE : --- Running action sequence: setup_environment
07 Feb 2018 05:17:49 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180207T030003Z/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180207T030003Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180207T030003Z /tmp/stage3-chroot.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging binary (1 of 13) app-misc/mime-types-9::gentoo
>>> Installing (1 of 13) app-misc/mime-types-9::gentoo
>>> Emerging binary (2 of 13) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (2 of 13) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging binary (3 of 13) sys-apps/install-xattr-0.5::gentoo
>>> Installing (3 of 13) sys-apps/install-xattr-0.5::gentoo
>>> Emerging binary (4 of 13) sys-apps/debianutils-4.8.3::gentoo
>>> Installing (4 of 13) sys-apps/debianutils-4.8.3::gentoo
>>> Emerging binary (5 of 13) sys-apps/attr-2.4.47-r2::gentoo
>>> Installing (5 of 13) sys-apps/attr-2.4.47-r2::gentoo
>>> Emerging binary (6 of 13) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Installing (6 of 13) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Emerging binary (7 of 13) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (7 of 13) sys-libs/gdbm-1.13-r2::gentoo
>>> Emerging binary (8 of 13) dev-libs/openssl-1.0.2n::gentoo
>>> Installing (8 of 13) dev-libs/openssl-1.0.2n::gentoo
>>> Emerging binary (9 of 13) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (9 of 13) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging binary (10 of 13) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (10 of 13) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging binary (11 of 13) dev-python/pyblake2-1.1.0::gentoo
>>> Installing (11 of 13) dev-python/pyblake2-1.1.0::gentoo
>>> Emerging binary (12 of 13) dev-python/pyxattr-0.5.5::gentoo
>>> Installing (12 of 13) dev-python/pyxattr-0.5.5::gentoo
>>> Emerging (13 of 13) sys-apps/portage-2.3.24::gentoo
>>> Installing (13 of 13) sys-apps/portage-2.3.24::gentoo
* Messages for package app-misc/ca-certificates-20161130.3.30.2:
* You should run update-ca-certificates manually after etc-update
* Messages for package sys-apps/portage-2.3.24:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
emerge --quiet --usepkg --buildpkg --newuse -e --update --deep --with-bdeps=y @system
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-libs/glibc-2.25-r9
>>> Running pre-merge checks for sys-devel/gcc-6.4.0-r1
>>> Running pre-merge checks for sys-libs/pam-1.2.1-r2
>>> Running pre-merge checks for net-misc/openssh-7.5_p1-r4
>>> Running pre-merge checks for sys-fs/eudev-3.2.5
*
* As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
>>> Emerging binary (1 of 187) virtual/libintl-0-r2::gentoo
>>> Installing (1 of 187) virtual/libintl-0-r2::gentoo
>>> Emerging binary (2 of 187) sys-libs/ncurses-6.0-r1::gentoo
>>> Installing (2 of 187) sys-libs/ncurses-6.0-r1::gentoo
>>> Emerging binary (3 of 187) dev-lang/python-exec-2.4.5::gentoo
>>> Installing (3 of 187) dev-lang/python-exec-2.4.5::gentoo
>>> Emerging binary (4 of 187) app-arch/bzip2-1.0.6-r8::gentoo
>>> Installing (4 of 187) app-arch/bzip2-1.0.6-r8::gentoo
>>> Emerging binary (5 of 187) sys-devel/gnuconfig-20170101::gentoo
>>> Installing (5 of 187) sys-devel/gnuconfig-20170101::gentoo
>>> Emerging binary (6 of 187) sys-apps/gentoo-functions-0.12::gentoo
>>> Installing (6 of 187) sys-apps/gentoo-functions-0.12::gentoo
>>> Emerging binary (7 of 187) virtual/libiconv-0-r2::gentoo
>>> Installing (7 of 187) virtual/libiconv-0-r2::gentoo
>>> Emerging binary (8 of 187) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (8 of 187) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging binary (9 of 187) app-misc/mime-types-9::gentoo
>>> Installing (9 of 187) app-misc/mime-types-9::gentoo
>>> Emerging binary (10 of 187) app-arch/gzip-1.8::gentoo
>>> Installing (10 of 187) app-arch/gzip-1.8::gentoo
>>> Emerging binary (11 of 187) net-libs/libmnl-1.0.4::gentoo
>>> Installing (11 of 187) net-libs/libmnl-1.0.4::gentoo
>>> Emerging binary (12 of 187) sys-apps/debianutils-4.8.3::gentoo
>>> Installing (12 of 187) sys-apps/debianutils-4.8.3::gentoo
>>> Emerging binary (13 of 187) app-misc/editor-wrapper-4::gentoo
>>> Installing (13 of 187) app-misc/editor-wrapper-4::gentoo
>>> Emerging binary (14 of 187) sys-apps/install-xattr-0.5::gentoo
>>> Installing (14 of 187) sys-apps/install-xattr-0.5::gentoo
>>> Emerging (15 of 187) sys-apps/opentmpfiles-0.1.3::gentoo
>>> Failed to emerge sys-apps/opentmpfiles-0.1.3, Log file:
>>> '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/build.log'
* Package: sys-apps/opentmpfiles-0.1.3
* Repository: gentoo
* Maintainer: williamh@gentoo.org openrc@gentoo.org
* USE: abi_x86_32 elibc_glibc kernel_linux userland_GNU x86
* FEATURES: preserve-libs sandbox userpriv usersandbox
gzip: error while loading shared libraries: cannot make segment writable for relocation: Permission denied
tar: This does not look like a tar archive
tar: Exiting with failure status due to previous errors
* ERROR: sys-apps/opentmpfiles-0.1.3::gentoo failed (unpack phase):
* unpack: failure unpacking opentmpfiles-0.1.3.tar.gz
*
* Call stack:
* ebuild.sh, line 124: Called src_unpack
* environment, line 395: Called default
* phase-functions.sh, line 853: Called default_src_unpack
* phase-functions.sh, line 880: Called __eapi0_src_unpack
* phase-helpers.sh, line 740: Called unpack 'opentmpfiles-0.1.3.tar.gz'
* phase-helpers.sh, line 387: Called __unpack_tar 'gzip -d'
* phase-helpers.sh, line 318: Called __assert_sigpipe_ok 'unpack: failure unpacking opentmpfiles-0.1.3.tar.gz'
* isolated-functions.sh, line 41: Called __helpers_die 'unpack: failure unpacking opentmpfiles-0.1.3.tar.gz'
* isolated-functions.sh, line 117: Called die
* The specific snippet of code:
* die "$@"
*
* If you need support, post the output of `emerge --info '=sys-apps/opentmpfiles-0.1.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/opentmpfiles-0.1.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/work'
* S: '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/work/opentmpfiles-0.1.3'
* Messages for package sys-fs/eudev-3.2.5:
*
* As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package sys-apps/opentmpfiles-0.1.3:
* ERROR: sys-apps/opentmpfiles-0.1.3::gentoo failed (unpack phase):
* unpack: failure unpacking opentmpfiles-0.1.3.tar.gz
*
* Call stack:
* ebuild.sh, line 124: Called src_unpack
* environment, line 395: Called default
* phase-functions.sh, line 853: Called default_src_unpack
* phase-functions.sh, line 880: Called __eapi0_src_unpack
* phase-helpers.sh, line 740: Called unpack 'opentmpfiles-0.1.3.tar.gz'
* phase-helpers.sh, line 387: Called __unpack_tar 'gzip -d'
* phase-helpers.sh, line 318: Called __assert_sigpipe_ok 'unpack: failure unpacking opentmpfiles-0.1.3.tar.gz'
* isolated-functions.sh, line 41: Called __helpers_die 'unpack: failure unpacking opentmpfiles-0.1.3.tar.gz'
* isolated-functions.sh, line 117: Called die
* The specific snippet of code:
* die "$@"
*
* If you need support, post the output of `emerge --info '=sys-apps/opentmpfiles-0.1.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/opentmpfiles-0.1.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/work'
* S: '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/work/opentmpfiles-0.1.3'
07 Feb 2018 05:21:00 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
07 Feb 2018 05:21:00 UTC: ERROR : CatalystError: Stage build aborting due to error.
07 Feb 2018 05:21:00 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.5/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
07 Feb 2018 05:21:00 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
112.96user 44.14system 3:21.66elapsed 77%CPU (0avgtext+0avgdata 322520maxresident)k
11888inputs+2815080outputs (0major+5443277minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20180207T030003Z.M7wO66/log/stage3.log
^ permalink raw reply [flat|nested] 25+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - stage3.spec
@ 2018-02-14 4:33 catalyst
0 siblings, 0 replies; 25+ messages in thread
From: catalyst @ 2018-02-14 4:33 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
14 Feb 2018 04:30:51 UTC: NOTICE : --- Running action sequence: setup_confdir
14 Feb 2018 04:30:51 UTC: NOTICE : --- Running action sequence: portage_overlay
14 Feb 2018 04:30:51 UTC: NOTICE : --- Running action sequence: base_dirs
14 Feb 2018 04:30:51 UTC: NOTICE : --- Running action sequence: bind
14 Feb 2018 04:30:51 UTC: NOTICE : --- Running action sequence: chroot_setup
14 Feb 2018 04:30:51 UTC: NOTICE : Setting up chroot...
14 Feb 2018 04:30:51 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
14 Feb 2018 04:30:51 UTC: WARNING : If your build fails look here first as the possible problem.
14 Feb 2018 04:30:51 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
14 Feb 2018 04:30:51 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
14 Feb 2018 04:30:51 UTC: WARNING : You have been warned.
14 Feb 2018 04:30:51 UTC: NOTICE : Writing the stage make.conf to: /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180214T030003Z/etc/portage/make.conf
14 Feb 2018 04:30:51 UTC: NOTICE : STICKY-CONFIG is enabled
14 Feb 2018 04:30:51 UTC: NOTICE : --- Running action sequence: setup_environment
14 Feb 2018 04:30:51 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180214T030003Z/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180214T030003Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180214T030003Z /tmp/stage3-chroot.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging binary (1 of 13) app-misc/mime-types-9::gentoo
>>> Installing (1 of 13) app-misc/mime-types-9::gentoo
>>> Emerging binary (2 of 13) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (2 of 13) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging binary (3 of 13) sys-apps/install-xattr-0.5::gentoo
>>> Installing (3 of 13) sys-apps/install-xattr-0.5::gentoo
>>> Emerging binary (4 of 13) sys-apps/debianutils-4.8.3::gentoo
>>> Installing (4 of 13) sys-apps/debianutils-4.8.3::gentoo
>>> Emerging binary (5 of 13) sys-apps/attr-2.4.47-r2::gentoo
>>> Installing (5 of 13) sys-apps/attr-2.4.47-r2::gentoo
>>> Emerging binary (6 of 13) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Installing (6 of 13) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Emerging binary (7 of 13) dev-libs/openssl-1.0.2n::gentoo
>>> Installing (7 of 13) dev-libs/openssl-1.0.2n::gentoo
>>> Emerging binary (8 of 13) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (8 of 13) sys-libs/gdbm-1.13-r2::gentoo
>>> Emerging binary (9 of 13) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (9 of 13) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging binary (10 of 13) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (10 of 13) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging binary (11 of 13) dev-python/pyxattr-0.5.5::gentoo
>>> Installing (11 of 13) dev-python/pyxattr-0.5.5::gentoo
>>> Emerging binary (12 of 13) dev-python/pyblake2-1.1.0::gentoo
>>> Installing (12 of 13) dev-python/pyblake2-1.1.0::gentoo
>>> Emerging (13 of 13) sys-apps/portage-2.3.24-r1::gentoo
>>> Installing (13 of 13) sys-apps/portage-2.3.24-r1::gentoo
* Messages for package app-misc/ca-certificates-20161130.3.30.2:
* You should run update-ca-certificates manually after etc-update
* Messages for package sys-apps/portage-2.3.24-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
emerge --quiet --usepkg --buildpkg --newuse -e --update --deep --with-bdeps=y @system
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-libs/glibc-2.25-r10
>>> Running pre-merge checks for sys-devel/gcc-6.4.0-r1
>>> Running pre-merge checks for sys-libs/pam-1.2.1-r2
>>> Running pre-merge checks for net-misc/openssh-7.5_p1-r4
>>> Running pre-merge checks for sys-fs/eudev-3.2.5
*
* As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
>>> Emerging binary (1 of 187) virtual/libintl-0-r2::gentoo
>>> Installing (1 of 187) virtual/libintl-0-r2::gentoo
>>> Emerging binary (2 of 187) sys-libs/ncurses-6.0-r1::gentoo
>>> Installing (2 of 187) sys-libs/ncurses-6.0-r1::gentoo
>>> Emerging binary (3 of 187) dev-lang/python-exec-2.4.5::gentoo
>>> Installing (3 of 187) dev-lang/python-exec-2.4.5::gentoo
>>> Emerging binary (4 of 187) app-arch/bzip2-1.0.6-r8::gentoo
>>> Installing (4 of 187) app-arch/bzip2-1.0.6-r8::gentoo
>>> Emerging binary (5 of 187) sys-devel/gnuconfig-20170101::gentoo
>>> Installing (5 of 187) sys-devel/gnuconfig-20170101::gentoo
>>> Emerging binary (6 of 187) sys-apps/gentoo-functions-0.12::gentoo
>>> Installing (6 of 187) sys-apps/gentoo-functions-0.12::gentoo
>>> Emerging binary (7 of 187) virtual/libiconv-0-r2::gentoo
>>> Installing (7 of 187) virtual/libiconv-0-r2::gentoo
>>> Emerging binary (8 of 187) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (8 of 187) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging binary (9 of 187) app-misc/mime-types-9::gentoo
>>> Installing (9 of 187) app-misc/mime-types-9::gentoo
>>> Emerging binary (10 of 187) app-arch/gzip-1.8::gentoo
>>> Installing (10 of 187) app-arch/gzip-1.8::gentoo
>>> Emerging binary (11 of 187) sys-apps/debianutils-4.8.3::gentoo
>>> Installing (11 of 187) sys-apps/debianutils-4.8.3::gentoo
>>> Emerging binary (12 of 187) net-libs/libmnl-1.0.4::gentoo
>>> Installing (12 of 187) net-libs/libmnl-1.0.4::gentoo
>>> Emerging binary (13 of 187) app-misc/editor-wrapper-4::gentoo
>>> Installing (13 of 187) app-misc/editor-wrapper-4::gentoo
>>> Emerging binary (14 of 187) sys-apps/install-xattr-0.5::gentoo
>>> Installing (14 of 187) sys-apps/install-xattr-0.5::gentoo
>>> Emerging binary (15 of 187) app-text/manpager-1::gentoo
>>> Installing (15 of 187) app-text/manpager-1::gentoo
>>> Emerging (16 of 187) sys-apps/opentmpfiles-0.1.3::gentoo
>>> Failed to emerge sys-apps/opentmpfiles-0.1.3, Log file:
>>> '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/build.log'
* Package: sys-apps/opentmpfiles-0.1.3
* Repository: gentoo
* Maintainer: williamh@gentoo.org openrc@gentoo.org
* USE: abi_x86_32 elibc_glibc kernel_linux userland_GNU x86
* FEATURES: preserve-libs sandbox userpriv usersandbox
gzip: error while loading shared libraries: cannot make segment writable for relocation: Permission denied
tar: This does not look like a tar archive
tar: Exiting with failure status due to previous errors
* ERROR: sys-apps/opentmpfiles-0.1.3::gentoo failed (unpack phase):
* unpack: failure unpacking opentmpfiles-0.1.3.tar.gz
*
* Call stack:
* ebuild.sh, line 124: Called src_unpack
* environment, line 396: Called default
* phase-functions.sh, line 853: Called default_src_unpack
* phase-functions.sh, line 880: Called __eapi0_src_unpack
* phase-helpers.sh, line 740: Called unpack 'opentmpfiles-0.1.3.tar.gz'
* phase-helpers.sh, line 387: Called __unpack_tar 'gzip -d'
* phase-helpers.sh, line 318: Called __assert_sigpipe_ok 'unpack: failure unpacking opentmpfiles-0.1.3.tar.gz'
* isolated-functions.sh, line 41: Called __helpers_die 'unpack: failure unpacking opentmpfiles-0.1.3.tar.gz'
* isolated-functions.sh, line 117: Called die
* The specific snippet of code:
* die "$@"
*
* If you need support, post the output of `emerge --info '=sys-apps/opentmpfiles-0.1.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/opentmpfiles-0.1.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/work'
* S: '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/work/opentmpfiles-0.1.3'
* Messages for package sys-fs/eudev-3.2.5:
*
* As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package sys-apps/opentmpfiles-0.1.3:
* ERROR: sys-apps/opentmpfiles-0.1.3::gentoo failed (unpack phase):
* unpack: failure unpacking opentmpfiles-0.1.3.tar.gz
*
* Call stack:
* ebuild.sh, line 124: Called src_unpack
* environment, line 396: Called default
* phase-functions.sh, line 853: Called default_src_unpack
* phase-functions.sh, line 880: Called __eapi0_src_unpack
* phase-helpers.sh, line 740: Called unpack 'opentmpfiles-0.1.3.tar.gz'
* phase-helpers.sh, line 387: Called __unpack_tar 'gzip -d'
* phase-helpers.sh, line 318: Called __assert_sigpipe_ok 'unpack: failure unpacking opentmpfiles-0.1.3.tar.gz'
* isolated-functions.sh, line 41: Called __helpers_die 'unpack: failure unpacking opentmpfiles-0.1.3.tar.gz'
* isolated-functions.sh, line 117: Called die
* The specific snippet of code:
* die "$@"
*
* If you need support, post the output of `emerge --info '=sys-apps/opentmpfiles-0.1.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/opentmpfiles-0.1.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/work'
* S: '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/work/opentmpfiles-0.1.3'
14 Feb 2018 04:33:44 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
14 Feb 2018 04:33:44 UTC: ERROR : CatalystError: Stage build aborting due to error.
14 Feb 2018 04:33:44 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.5/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
14 Feb 2018 04:33:44 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
102.02user 42.45system 3:06.29elapsed 77%CPU (0avgtext+0avgdata 322284maxresident)k
72264inputs+2816968outputs (0major+5558279minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20180214T030003Z.vn9XbJ/log/stage3.log
^ permalink raw reply [flat|nested] 25+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - stage3.spec
@ 2018-02-21 4:27 catalyst
0 siblings, 0 replies; 25+ messages in thread
From: catalyst @ 2018-02-21 4:27 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f stage3.spec
21 Feb 2018 04:25:28 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
21 Feb 2018 04:25:28 UTC: NOTICE : conf_values[options] = {'preserve_libs', 'pkgcache', 'bindist', 'clear-autoresume'}
21 Feb 2018 04:25:28 UTC: NOTICE : Processing spec file: stage3.spec
21 Feb 2018 04:25:29 UTC: NOTICE : Using target: stage3
21 Feb 2018 04:25:29 UTC: NOTICE : Source file specification matching setting is: loose
21 Feb 2018 04:25:29 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
21 Feb 2018 04:25:29 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage2-i486-20180221T030003Z.tar.xz
21 Feb 2018 04:25:29 UTC: NOTICE : --- Running action sequence: unpack
21 Feb 2018 04:25:29 UTC: NOTICE : Clearing the chroot path ...
21 Feb 2018 04:25:29 UTC: NOTICE : Emptying directory: /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180221T030003Z
21 Feb 2018 04:25:29 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage2-i486-20180221T030003Z.tar.xz
21 Feb 2018 04:25:29 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180221T030003Z (this may take some time) ..
21 Feb 2018 04:25:31 UTC: NOTICE : --- Running action sequence: unpack_snapshot
21 Feb 2018 04:25:31 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
21 Feb 2018 04:25:38 UTC: NOTICE : --- Running action sequence: setup_confdir
21 Feb 2018 04:25:38 UTC: NOTICE : --- Running action sequence: portage_overlay
21 Feb 2018 04:25:38 UTC: NOTICE : --- Running action sequence: base_dirs
21 Feb 2018 04:25:38 UTC: NOTICE : --- Running action sequence: bind
21 Feb 2018 04:25:38 UTC: NOTICE : --- Running action sequence: chroot_setup
21 Feb 2018 04:25:38 UTC: NOTICE : Setting up chroot...
21 Feb 2018 04:25:38 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
21 Feb 2018 04:25:38 UTC: WARNING : If your build fails look here first as the possible problem.
21 Feb 2018 04:25:38 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
21 Feb 2018 04:25:38 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
21 Feb 2018 04:25:38 UTC: WARNING : You have been warned.
21 Feb 2018 04:25:38 UTC: NOTICE : Writing the stage make.conf to: /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180221T030003Z/etc/portage/make.conf
21 Feb 2018 04:25:38 UTC: NOTICE : STICKY-CONFIG is enabled
21 Feb 2018 04:25:38 UTC: NOTICE : --- Running action sequence: setup_environment
21 Feb 2018 04:25:38 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180221T030003Z/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180221T030003Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180221T030003Z /tmp/stage3-chroot.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Emerging binary (1 of 5) sys-apps/install-xattr-0.5::gentoo
>>> Installing (1 of 5) sys-apps/install-xattr-0.5::gentoo
>>> Emerging binary (2 of 5) sys-apps/attr-2.4.47-r2::gentoo
>>> Installing (2 of 5) sys-apps/attr-2.4.47-r2::gentoo
>>> Emerging binary (3 of 5) dev-python/pyxattr-0.5.5::gentoo
>>> Installing (3 of 5) dev-python/pyxattr-0.5.5::gentoo
>>> Emerging binary (4 of 5) dev-python/pyblake2-1.1.0::gentoo
>>> Installing (4 of 5) dev-python/pyblake2-1.1.0::gentoo
>>> Emerging binary (5 of 5) sys-apps/portage-2.3.24-r1::gentoo
>>> Installing (5 of 5) sys-apps/portage-2.3.24-r1::gentoo
emerge --quiet --usepkg --buildpkg --newuse -e --update --deep --with-bdeps=y @system
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-libs/glibc-2.25-r10
>>> Running pre-merge checks for sys-devel/gcc-6.4.0-r1
>>> Running pre-merge checks for sys-libs/pam-1.2.1-r2
>>> Running pre-merge checks for net-misc/openssh-7.5_p1-r4
>>> Running pre-merge checks for sys-fs/eudev-3.2.5
*
* As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
>>> Emerging binary (1 of 187) virtual/libintl-0-r2::gentoo
>>> Installing (1 of 187) virtual/libintl-0-r2::gentoo
>>> Emerging binary (2 of 187) sys-libs/ncurses-6.0-r1::gentoo
>>> Installing (2 of 187) sys-libs/ncurses-6.0-r1::gentoo
>>> Emerging binary (3 of 187) dev-lang/python-exec-2.4.5::gentoo
>>> Installing (3 of 187) dev-lang/python-exec-2.4.5::gentoo
>>> Emerging binary (4 of 187) app-arch/bzip2-1.0.6-r8::gentoo
>>> Installing (4 of 187) app-arch/bzip2-1.0.6-r8::gentoo
>>> Emerging binary (5 of 187) sys-devel/gnuconfig-20170101::gentoo
>>> Installing (5 of 187) sys-devel/gnuconfig-20170101::gentoo
>>> Emerging binary (6 of 187) sys-apps/gentoo-functions-0.12::gentoo
>>> Installing (6 of 187) sys-apps/gentoo-functions-0.12::gentoo
>>> Emerging binary (7 of 187) virtual/libiconv-0-r2::gentoo
>>> Installing (7 of 187) virtual/libiconv-0-r2::gentoo
>>> Emerging binary (8 of 187) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (8 of 187) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging binary (9 of 187) app-misc/mime-types-9::gentoo
>>> Installing (9 of 187) app-misc/mime-types-9::gentoo
>>> Emerging binary (10 of 187) app-arch/gzip-1.8::gentoo
>>> Installing (10 of 187) app-arch/gzip-1.8::gentoo
>>> Emerging binary (11 of 187) app-misc/editor-wrapper-4::gentoo
>>> Installing (11 of 187) app-misc/editor-wrapper-4::gentoo
>>> Emerging binary (12 of 187) net-libs/libmnl-1.0.4::gentoo
>>> Installing (12 of 187) net-libs/libmnl-1.0.4::gentoo
>>> Emerging binary (13 of 187) sys-apps/debianutils-4.8.3::gentoo
>>> Installing (13 of 187) sys-apps/debianutils-4.8.3::gentoo
>>> Emerging binary (14 of 187) app-text/manpager-1::gentoo
>>> Installing (14 of 187) app-text/manpager-1::gentoo
>>> Emerging (15 of 187) sys-apps/opentmpfiles-0.1.3::gentoo
>>> Failed to emerge sys-apps/opentmpfiles-0.1.3, Log file:
>>> '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/build.log'
* Package: sys-apps/opentmpfiles-0.1.3
* Repository: gentoo
* USE: abi_x86_32 elibc_glibc kernel_linux userland_GNU x86
* FEATURES: preserve-libs sandbox userpriv usersandbox
gzip: error while loading shared libraries: cannot make segment writable for relocation: Permission denied
tar: This does not look like a tar archive
tar: Exiting with failure status due to previous errors
* ERROR: sys-apps/opentmpfiles-0.1.3::gentoo failed (unpack phase):
* unpack: failure unpacking opentmpfiles-0.1.3.tar.gz
*
* Call stack:
* ebuild.sh, line 124: Called src_unpack
* environment, line 396: Called default
* phase-functions.sh, line 853: Called default_src_unpack
* phase-functions.sh, line 880: Called __eapi0_src_unpack
* phase-helpers.sh, line 740: Called unpack 'opentmpfiles-0.1.3.tar.gz'
* phase-helpers.sh, line 387: Called __unpack_tar 'gzip -d'
* phase-helpers.sh, line 318: Called __assert_sigpipe_ok 'unpack: failure unpacking opentmpfiles-0.1.3.tar.gz'
* isolated-functions.sh, line 41: Called __helpers_die 'unpack: failure unpacking opentmpfiles-0.1.3.tar.gz'
* isolated-functions.sh, line 117: Called die
* The specific snippet of code:
* die "$@"
*
* If you need support, post the output of `emerge --info '=sys-apps/opentmpfiles-0.1.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/opentmpfiles-0.1.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/work'
* S: '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/work/opentmpfiles-0.1.3'
* Messages for package sys-fs/eudev-3.2.5:
*
* As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package sys-apps/opentmpfiles-0.1.3:
* ERROR: sys-apps/opentmpfiles-0.1.3::gentoo failed (unpack phase):
* unpack: failure unpacking opentmpfiles-0.1.3.tar.gz
*
* Call stack:
* ebuild.sh, line 124: Called src_unpack
* environment, line 396: Called default
* phase-functions.sh, line 853: Called default_src_unpack
* phase-functions.sh, line 880: Called __eapi0_src_unpack
* phase-helpers.sh, line 740: Called unpack 'opentmpfiles-0.1.3.tar.gz'
* phase-helpers.sh, line 387: Called __unpack_tar 'gzip -d'
* phase-helpers.sh, line 318: Called __assert_sigpipe_ok 'unpack: failure unpacking opentmpfiles-0.1.3.tar.gz'
* isolated-functions.sh, line 41: Called __helpers_die 'unpack: failure unpacking opentmpfiles-0.1.3.tar.gz'
* isolated-functions.sh, line 117: Called die
* The specific snippet of code:
* die "$@"
*
* If you need support, post the output of `emerge --info '=sys-apps/opentmpfiles-0.1.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/opentmpfiles-0.1.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/work'
* S: '/var/tmp/portage/sys-apps/opentmpfiles-0.1.3/work/opentmpfiles-0.1.3'
21 Feb 2018 04:27:18 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
21 Feb 2018 04:27:18 UTC: ERROR : CatalystError: Stage build aborting due to error.
21 Feb 2018 04:27:18 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.5/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
21 Feb 2018 04:27:18 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
65.52user 22.77system 1:49.89elapsed 80%CPU (0avgtext+0avgdata 317500maxresident)k
16inputs+2285752outputs (0major+3000755minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20180221T030003Z.Pb6BBV/log/stage3.log
^ permalink raw reply [flat|nested] 25+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - stage3.spec
@ 2018-04-04 4:11 catalyst
0 siblings, 0 replies; 25+ messages in thread
From: catalyst @ 2018-04-04 4:11 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f stage3.spec
04 Apr 2018 04:10:49 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
04 Apr 2018 04:10:49 UTC: NOTICE : conf_values[options] = {'preserve_libs', 'pkgcache', 'clear-autoresume', 'bindist'}
04 Apr 2018 04:10:49 UTC: NOTICE : Processing spec file: stage3.spec
04 Apr 2018 04:10:49 UTC: NOTICE : Using target: stage3
04 Apr 2018 04:10:49 UTC: NOTICE : Source file specification matching setting is: loose
04 Apr 2018 04:10:49 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
04 Apr 2018 04:10:49 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage2-i486-20180404T030003Z.tar.xz
04 Apr 2018 04:10:49 UTC: NOTICE : --- Running action sequence: unpack
04 Apr 2018 04:10:49 UTC: NOTICE : Clearing the chroot path ...
04 Apr 2018 04:10:49 UTC: NOTICE : Emptying directory: /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180404T030003Z
04 Apr 2018 04:10:49 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage2-i486-20180404T030003Z.tar.xz
04 Apr 2018 04:10:49 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180404T030003Z (this may take some time) ..
04 Apr 2018 04:10:50 UTC: NOTICE : --- Running action sequence: unpack_snapshot
04 Apr 2018 04:10:50 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
04 Apr 2018 04:10:59 UTC: NOTICE : --- Running action sequence: setup_confdir
04 Apr 2018 04:10:59 UTC: NOTICE : --- Running action sequence: portage_overlay
04 Apr 2018 04:10:59 UTC: NOTICE : --- Running action sequence: base_dirs
04 Apr 2018 04:10:59 UTC: NOTICE : --- Running action sequence: bind
04 Apr 2018 04:10:59 UTC: NOTICE : --- Running action sequence: chroot_setup
04 Apr 2018 04:10:59 UTC: NOTICE : Setting up chroot...
04 Apr 2018 04:10:59 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
04 Apr 2018 04:10:59 UTC: WARNING : If your build fails look here first as the possible problem.
04 Apr 2018 04:10:59 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
04 Apr 2018 04:10:59 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
04 Apr 2018 04:10:59 UTC: WARNING : You have been warned.
04 Apr 2018 04:10:59 UTC: NOTICE : Writing the stage make.conf to: /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180404T030003Z/etc/portage/make.conf
04 Apr 2018 04:10:59 UTC: NOTICE : STICKY-CONFIG is enabled
04 Apr 2018 04:10:59 UTC: NOTICE : --- Running action sequence: setup_environment
04 Apr 2018 04:10:59 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180404T030003Z/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180404T030003Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180404T030003Z /tmp/stage3-chroot.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Emerging binary (1 of 5) sys-apps/install-xattr-0.5::gentoo
>>> Installing (1 of 5) sys-apps/install-xattr-0.5::gentoo
>>> Emerging binary (2 of 5) sys-apps/attr-2.4.47-r2::gentoo
>>> Installing (2 of 5) sys-apps/attr-2.4.47-r2::gentoo
>>> Emerging binary (3 of 5) dev-python/pyxattr-0.5.5::gentoo
>>> Installing (3 of 5) dev-python/pyxattr-0.5.5::gentoo
>>> Emerging binary (4 of 5) dev-python/pyblake2-1.1.0::gentoo
>>> Installing (4 of 5) dev-python/pyblake2-1.1.0::gentoo
>>> Emerging binary (5 of 5) sys-apps/portage-2.3.24-r1::gentoo
>>> Installing (5 of 5) sys-apps/portage-2.3.24-r1::gentoo
emerge --quiet --usepkg --buildpkg --newuse -e --update --deep --with-bdeps=y @system
[nomerge ] virtual/package-manager-1::gentoo
[nomerge ] sys-apps/portage-2.3.24-r1::gentoo USE="(ipc) native-extensions xattr -build -doc -epydoc -gentoo-dev -rsync-verify (-selinux)" PYTHON_TARGETS="python2_7 python3_5 -pypy -python3_4 -python3_6"
[nomerge ] dev-python/pyxattr-0.5.5::gentoo USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) -python3_4"
[nomerge ] dev-python/setuptools-34.0.2-r1::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6"
[binary N ] dev-python/packaging-16.8::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6" 0 KiB
[ebuild N ] dev-python/six-1.11.0::gentoo USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6" 0 KiB
[binary N ] dev-python/setuptools-34.0.2-r1::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6" 0 KiB
Total: 3 packages (3 new, 2 binaries), Size of downloads: 0 KiB
* Error: circular dependencies:
(dev-python/six-1.11.0:0/0::gentoo, ebuild scheduled for merge) depends on
(dev-python/setuptools-34.0.2-r1:0/0::gentoo, binary scheduled for merge) (buildtime)
(dev-python/six-1.11.0:0/0::gentoo, ebuild scheduled for merge) (runtime)
* Note that circular dependencies can often be avoided by temporarily
* disabling USE flags that trigger optional dependencies.
04 Apr 2018 04:11:41 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
04 Apr 2018 04:11:42 UTC: ERROR : CatalystError: Stage build aborting due to error.
04 Apr 2018 04:11:42 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.5/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
04 Apr 2018 04:11:42 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
34.88user 4.79system 0:53.29elapsed 74%CPU (0avgtext+0avgdata 321452maxresident)k
0inputs+2185736outputs (0major+766015minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20180404T030003Z.ufjahC/log/stage3.log
^ permalink raw reply [flat|nested] 25+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - stage3.spec
@ 2018-04-11 4:12 catalyst
0 siblings, 0 replies; 25+ messages in thread
From: catalyst @ 2018-04-11 4:12 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f stage3.spec
11 Apr 2018 04:11:01 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
11 Apr 2018 04:11:01 UTC: NOTICE : conf_values[options] = {'preserve_libs', 'clear-autoresume', 'pkgcache', 'bindist'}
11 Apr 2018 04:11:01 UTC: NOTICE : Processing spec file: stage3.spec
11 Apr 2018 04:11:01 UTC: NOTICE : Using target: stage3
11 Apr 2018 04:11:01 UTC: NOTICE : Source file specification matching setting is: loose
11 Apr 2018 04:11:01 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
11 Apr 2018 04:11:01 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage2-i486-20180411T030004Z.tar.xz
11 Apr 2018 04:11:01 UTC: NOTICE : --- Running action sequence: unpack
11 Apr 2018 04:11:01 UTC: NOTICE : Clearing the chroot path ...
11 Apr 2018 04:11:01 UTC: NOTICE : Emptying directory: /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180411T030004Z
11 Apr 2018 04:11:01 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage2-i486-20180411T030004Z.tar.xz
11 Apr 2018 04:11:01 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180411T030004Z (this may take some time) ..
11 Apr 2018 04:11:02 UTC: NOTICE : --- Running action sequence: unpack_snapshot
11 Apr 2018 04:11:02 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
11 Apr 2018 04:11:19 UTC: NOTICE : --- Running action sequence: setup_confdir
11 Apr 2018 04:11:19 UTC: NOTICE : --- Running action sequence: portage_overlay
11 Apr 2018 04:11:19 UTC: NOTICE : --- Running action sequence: base_dirs
11 Apr 2018 04:11:19 UTC: NOTICE : --- Running action sequence: bind
11 Apr 2018 04:11:19 UTC: NOTICE : --- Running action sequence: chroot_setup
11 Apr 2018 04:11:19 UTC: NOTICE : Setting up chroot...
11 Apr 2018 04:11:19 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
11 Apr 2018 04:11:19 UTC: WARNING : If your build fails look here first as the possible problem.
11 Apr 2018 04:11:19 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
11 Apr 2018 04:11:19 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
11 Apr 2018 04:11:19 UTC: WARNING : You have been warned.
11 Apr 2018 04:11:19 UTC: NOTICE : Writing the stage make.conf to: /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180411T030004Z/etc/portage/make.conf
11 Apr 2018 04:11:19 UTC: NOTICE : STICKY-CONFIG is enabled
11 Apr 2018 04:11:19 UTC: NOTICE : --- Running action sequence: setup_environment
11 Apr 2018 04:11:19 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180411T030004Z/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180411T030004Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180411T030004Z /tmp/stage3-chroot.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Emerging binary (1 of 5) sys-apps/install-xattr-0.5::gentoo
>>> Installing (1 of 5) sys-apps/install-xattr-0.5::gentoo
>>> Emerging binary (2 of 5) sys-apps/attr-2.4.47-r2::gentoo
>>> Installing (2 of 5) sys-apps/attr-2.4.47-r2::gentoo
>>> Emerging binary (3 of 5) dev-python/pyblake2-1.1.0::gentoo
>>> Installing (3 of 5) dev-python/pyblake2-1.1.0::gentoo
>>> Emerging binary (4 of 5) dev-python/pyxattr-0.5.5::gentoo
>>> Installing (4 of 5) dev-python/pyxattr-0.5.5::gentoo
>>> Emerging binary (5 of 5) sys-apps/portage-2.3.24-r1::gentoo
>>> Installing (5 of 5) sys-apps/portage-2.3.24-r1::gentoo
emerge --quiet --usepkg --buildpkg --newuse -e --update --deep --with-bdeps=y @system
[nomerge ] virtual/service-manager-0::gentoo USE="(-prefix)"
[nomerge ] sys-apps/openrc-0.34.11::gentoo USE="ncurses netifrc pam unicode -audit -debug -newnet (-prefix) (-selinux) -static-libs"
[nomerge ] sys-auth/pambase-20150213-r1::gentoo USE="cracklib nullok sha512 -consolekit -debug -elogind -gnome-keyring -minimal -mktemp -pam_krb5 -pam_ssh -passwdqc -securetty (-selinux) -systemd"
[nomerge ] app-portage/portage-utils-0.64::gentoo USE="nls* -static"
[nomerge ] dev-libs/iniparser-3.1-r1::gentoo USE="-doc -examples -static-libs"
[nomerge ] sys-devel/autoconf-2.69-r4:2.69::gentoo USE="-emacs"
[nomerge ] dev-lang/perl-5.24.3-r1:0/5.24::gentoo USE="berkdb* gdbm* -debug -doc -ithreads"
[nomerge ] app-admin/perl-cleaner-2.25::gentoo
[nomerge ] sys-apps/portage-2.3.24-r1::gentoo USE="(ipc) native-extensions xattr -build -doc -epydoc -gentoo-dev -rsync-verify (-selinux)" PYTHON_TARGETS="python2_7 python3_5 -pypy -python3_4 -python3_6"
[nomerge ] dev-python/pyxattr-0.5.5::gentoo USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) -python3_4"
[nomerge ] dev-python/setuptools-34.0.2-r1::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6"
[binary N ] dev-python/packaging-16.8::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6" 0 KiB
[ebuild N ] dev-python/six-1.11.0::gentoo USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6" 0 KiB
[binary N ] dev-python/setuptools-34.0.2-r1::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6" 0 KiB
Total: 3 packages (3 new, 2 binaries), Size of downloads: 0 KiB
* Error: circular dependencies:
(dev-python/six-1.11.0:0/0::gentoo, ebuild scheduled for merge) depends on
(dev-python/setuptools-34.0.2-r1:0/0::gentoo, binary scheduled for merge) (buildtime)
(dev-python/six-1.11.0:0/0::gentoo, ebuild scheduled for merge) (runtime)
* Note that circular dependencies can often be avoided by temporarily
* disabling USE flags that trigger optional dependencies.
11 Apr 2018 04:12:06 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
11 Apr 2018 04:12:06 UTC: ERROR : CatalystError: Stage build aborting due to error.
11 Apr 2018 04:12:06 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.5/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
11 Apr 2018 04:12:06 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
34.30user 5.08system 1:05.31elapsed 60%CPU (0avgtext+0avgdata 321292maxresident)k
0inputs+2178408outputs (0major+756986minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20180411T030004Z.Rp7uVw/log/stage3.log
^ permalink raw reply [flat|nested] 25+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - stage3.spec
@ 2018-04-18 4:11 catalyst
0 siblings, 0 replies; 25+ messages in thread
From: catalyst @ 2018-04-18 4:11 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f stage3.spec
18 Apr 2018 04:10:48 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
18 Apr 2018 04:10:48 UTC: NOTICE : conf_values[options] = {'preserve_libs', 'bindist', 'pkgcache', 'clear-autoresume'}
18 Apr 2018 04:10:48 UTC: NOTICE : Processing spec file: stage3.spec
18 Apr 2018 04:10:48 UTC: NOTICE : Using target: stage3
18 Apr 2018 04:10:48 UTC: NOTICE : Source file specification matching setting is: loose
18 Apr 2018 04:10:48 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
18 Apr 2018 04:10:48 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage2-i486-20180418T030004Z.tar.xz
18 Apr 2018 04:10:48 UTC: NOTICE : --- Running action sequence: unpack
18 Apr 2018 04:10:48 UTC: NOTICE : Clearing the chroot path ...
18 Apr 2018 04:10:48 UTC: NOTICE : Emptying directory: /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180418T030004Z
18 Apr 2018 04:10:48 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage2-i486-20180418T030004Z.tar.xz
18 Apr 2018 04:10:48 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180418T030004Z (this may take some time) ..
18 Apr 2018 04:10:49 UTC: NOTICE : --- Running action sequence: unpack_snapshot
18 Apr 2018 04:10:49 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
18 Apr 2018 04:11:02 UTC: NOTICE : --- Running action sequence: setup_confdir
18 Apr 2018 04:11:02 UTC: NOTICE : --- Running action sequence: portage_overlay
18 Apr 2018 04:11:02 UTC: NOTICE : --- Running action sequence: base_dirs
18 Apr 2018 04:11:02 UTC: NOTICE : --- Running action sequence: bind
18 Apr 2018 04:11:02 UTC: NOTICE : --- Running action sequence: chroot_setup
18 Apr 2018 04:11:02 UTC: NOTICE : Setting up chroot...
18 Apr 2018 04:11:02 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
18 Apr 2018 04:11:02 UTC: WARNING : If your build fails look here first as the possible problem.
18 Apr 2018 04:11:02 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
18 Apr 2018 04:11:02 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
18 Apr 2018 04:11:02 UTC: WARNING : You have been warned.
18 Apr 2018 04:11:02 UTC: NOTICE : Writing the stage make.conf to: /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180418T030004Z/etc/portage/make.conf
18 Apr 2018 04:11:02 UTC: NOTICE : STICKY-CONFIG is enabled
18 Apr 2018 04:11:02 UTC: NOTICE : --- Running action sequence: setup_environment
18 Apr 2018 04:11:02 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180418T030004Z/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180418T030004Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage3-i486-20180418T030004Z /tmp/stage3-chroot.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Emerging binary (1 of 5) sys-apps/install-xattr-0.5::gentoo
>>> Installing (1 of 5) sys-apps/install-xattr-0.5::gentoo
>>> Emerging binary (2 of 5) sys-apps/attr-2.4.47-r2::gentoo
>>> Installing (2 of 5) sys-apps/attr-2.4.47-r2::gentoo
>>> Emerging binary (3 of 5) dev-python/pyxattr-0.5.5::gentoo
>>> Installing (3 of 5) dev-python/pyxattr-0.5.5::gentoo
>>> Emerging binary (4 of 5) dev-python/pyblake2-1.1.0::gentoo
>>> Installing (4 of 5) dev-python/pyblake2-1.1.0::gentoo
>>> Emerging binary (5 of 5) sys-apps/portage-2.3.24-r1::gentoo
>>> Installing (5 of 5) sys-apps/portage-2.3.24-r1::gentoo
emerge --quiet --usepkg --buildpkg --newuse -e --update --deep --with-bdeps=y @system
[nomerge ] virtual/ssh-0::gentoo USE="-minimal"
[nomerge ] net-misc/openssh-7.5_p1-r4::gentoo USE="bindist hpn pam pie ssl -X -X509 -audit -debug -kerberos -ldap -ldns -libedit -libressl -livecd -sctp (-selinux) -skey -ssh1 -static {-test}"
[nomerge ] dev-libs/openssl-1.0.2o::gentoo USE="asm bindist sslv3 tls-heartbeat zlib -gmp -kerberos -rfc3779 -sctp -sslv2 -static-libs {-test} -vanilla" CPU_FLAGS_X86="-sse2"
[nomerge ] dev-lang/perl-5.24.3-r1:0/5.24::gentoo USE="berkdb* gdbm* -debug -doc -ithreads"
[nomerge ] app-admin/perl-cleaner-2.25::gentoo
[nomerge ] sys-apps/portage-2.3.24-r1::gentoo USE="(ipc) native-extensions xattr -build -doc -epydoc -gentoo-dev -rsync-verify (-selinux)" PYTHON_TARGETS="python2_7 python3_5 -pypy -python3_4 -python3_6"
[nomerge ] dev-python/pyxattr-0.5.5::gentoo USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) -python3_4"
[nomerge ] dev-python/setuptools-34.0.2-r1::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6"
[binary N ] dev-python/packaging-16.8::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6" 0 KiB
[ebuild N ] dev-python/six-1.11.0::gentoo USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6" 0 KiB
[binary N ] dev-python/setuptools-34.0.2-r1::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6" 0 KiB
Total: 3 packages (3 new, 2 binaries), Size of downloads: 0 KiB
* Error: circular dependencies:
(dev-python/six-1.11.0:0/0::gentoo, ebuild scheduled for merge) depends on
(dev-python/setuptools-34.0.2-r1:0/0::gentoo, binary scheduled for merge) (buildtime)
(dev-python/six-1.11.0:0/0::gentoo, ebuild scheduled for merge) (runtime)
* Note that circular dependencies can often be avoided by temporarily
* disabling USE flags that trigger optional dependencies.
18 Apr 2018 04:11:38 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
18 Apr 2018 04:11:39 UTC: ERROR : CatalystError: Stage build aborting due to error.
18 Apr 2018 04:11:39 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.5/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
18 Apr 2018 04:11:39 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
34.37user 5.00system 0:51.17elapsed 76%CPU (0avgtext+0avgdata 320992maxresident)k
0inputs+2176608outputs (0major+761457minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20180418T030004Z.tK6pR6/log/stage3.log
^ permalink raw reply [flat|nested] 25+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - stage3.spec
@ 2020-03-17 14:07 catalyst
0 siblings, 0 replies; 25+ messages in thread
From: catalyst @ 2020-03-17 14:07 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging binary (147 of 214) virtual/perl-JSON-PP-4.20.0::gentoo
>>> Installing (147 of 214) virtual/perl-JSON-PP-4.20.0::gentoo
>>> Emerging binary (148 of 214) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Installing (148 of 214) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Emerging binary (149 of 214) virtual/perl-File-Temp-0.230.900::gentoo
>>> Installing (149 of 214) virtual/perl-File-Temp-0.230.900::gentoo
>>> Emerging binary (150 of 214) dev-perl/TermReadKey-2.370.0::gentoo
>>> Installing (150 of 214) dev-perl/TermReadKey-2.370.0::gentoo
>>> Emerging binary (151 of 214) dev-perl/Text-WrapI18N-0.60.0-r1::gentoo
>>> Emerging binary (152 of 214) dev-perl/Unicode-EastAsianWidth-1.330.0-r1::gentoo
>>> Emerging binary (153 of 214) dev-perl/Text-Unidecode-1.300.0::gentoo
>>> Installing (151 of 214) dev-perl/Text-WrapI18N-0.60.0-r1::gentoo
>>> Emerging binary (154 of 214) dev-perl/Class-Inspector-1.320.0::gentoo
>>> Emerging binary (155 of 214) dev-perl/File-ShareDir-Install-0.110.0::gentoo
>>> Installing (152 of 214) dev-perl/Unicode-EastAsianWidth-1.330.0-r1::gentoo
>>> Emerging binary (156 of 214) dev-util/intltool-0.51.0-r2::gentoo
>>> Emerging binary (157 of 214) virtual/perl-CPAN-Meta-2.150.10-r3::gentoo
>>> Installing (153 of 214) dev-perl/Text-Unidecode-1.300.0::gentoo
>>> Emerging binary (158 of 214) sys-apps/help2man-1.47.10::gentoo
>>> Installing (154 of 214) dev-perl/Class-Inspector-1.320.0::gentoo
>>> Installing (155 of 214) dev-perl/File-ShareDir-Install-0.110.0::gentoo
>>> Installing (156 of 214) dev-util/intltool-0.51.0-r2::gentoo
>>> Installing (157 of 214) virtual/perl-CPAN-Meta-2.150.10-r3::gentoo
>>> Installing (158 of 214) sys-apps/help2man-1.47.10::gentoo
>>> Emerging binary (159 of 214) dev-perl/Module-Build-0.422.400::gentoo
>>> Installing (159 of 214) dev-perl/Module-Build-0.422.400::gentoo
>>> Emerging binary (160 of 214) dev-perl/File-ShareDir-1.104.0::gentoo
>>> Emerging binary (161 of 214) sys-devel/automake-1.16.1-r1::gentoo
>>> Installing (160 of 214) dev-perl/File-ShareDir-1.104.0::gentoo
>>> Installing (161 of 214) sys-devel/automake-1.16.1-r1::gentoo
>>> Emerging binary (162 of 214) dev-perl/SGMLSpm-1.1-r1::gentoo
>>> Installing (162 of 214) dev-perl/SGMLSpm-1.1-r1::gentoo
>>> Emerging binary (163 of 214) dev-perl/libintl-perl-1.310.0::gentoo
>>> Emerging binary (164 of 214) sys-devel/libtool-2.4.6-r6::gentoo
>>> Installing (163 of 214) dev-perl/libintl-perl-1.310.0::gentoo
>>> Installing (164 of 214) sys-devel/libtool-2.4.6-r6::gentoo
>>> Emerging binary (165 of 214) sys-apps/texinfo-6.6-r1::gentoo
>>> Installing (165 of 214) sys-apps/texinfo-6.6-r1::gentoo
>>> Emerging (166 of 214) net-libs/libtirpc-1.2.5::gentoo
>>> Emerging binary (167 of 214) dev-python/setuptools-44.0.0::gentoo
>>> Installing (166 of 214) net-libs/libtirpc-1.2.5::gentoo
>>> Installing (167 of 214) dev-python/setuptools-44.0.0::gentoo
>>> Emerging binary (168 of 214) net-libs/libnsl-1.2.0::gentoo
>>> Installing (168 of 214) net-libs/libnsl-1.2.0::gentoo
>>> Emerging binary (169 of 214) app-text/build-docbook-catalog-1.21::gentoo
>>> Installing (169 of 214) app-text/build-docbook-catalog-1.21::gentoo
>>> Emerging binary (170 of 214) app-text/opensp-1.5.2-r3::gentoo
>>> Installing (170 of 214) app-text/opensp-1.5.2-r3::gentoo
>>> Emerging binary (171 of 214) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Installing (171 of 214) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Emerging binary (172 of 214) app-text/openjade-1.3.2-r9::gentoo
>>> Installing (172 of 214) app-text/openjade-1.3.2-r9::gentoo
>>> Emerging binary (173 of 214) app-text/docbook-xml-dtd-4.1.2-r7::gentoo
>>> Installing (173 of 214) app-text/docbook-xml-dtd-4.1.2-r7::gentoo
>>> Emerging binary (174 of 214) app-text/po4a-0.47-r1::gentoo
>>> Installing (174 of 214) app-text/po4a-0.47-r1::gentoo
>>> Emerging binary (175 of 214) app-text/docbook-xml-dtd-4.5-r2::gentoo
>>> Installing (175 of 214) app-text/docbook-xml-dtd-4.5-r2::gentoo
>>> Emerging (176 of 214) sys-apps/man-db-2.8.7::gentoo
>>> Emerging binary (177 of 214) app-text/docbook-xml-dtd-4.4-r3::gentoo
>>> Installing (177 of 214) app-text/docbook-xml-dtd-4.4-r3::gentoo
>>> Emerging binary (178 of 214) app-text/docbook-xml-dtd-4.3-r2::gentoo
>>> Installing (178 of 214) app-text/docbook-xml-dtd-4.3-r2::gentoo
>>> Emerging binary (179 of 214) dev-python/bz2file-0.98::gentoo
>>> Failed to emerge sys-apps/man-db-2.8.7
>>> Installing (179 of 214) dev-python/bz2file-0.98::gentoo
* Messages for package sys-fs/eudev-3.2.9:
*
* As of 2013-01-29, eudev-3.2.9 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package acct-group/man-0:
* Adding group 'man' to your system ...
* - Groupid: 15
* Messages for package sys-apps/opentmpfiles-0.2:
* Auto-adding 'opentmpfiles-dev' service to your sysinit runlevel
* Auto-adding 'opentmpfiles-setup' service to your boot runlevel
* Messages for package sys-apps/baselayout-2.6-r1:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package sys-libs/timezone-data-2019c:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package acct-user/man-1:
* Adding user 'man' to your system ...
* - Userid: 13
* - Shell: /sbin/nologin
* - Home: /dev/null
* - Groups: man
* - GECOS: added by portage for man
* Updating comment for user 'man' ...
* - Comment: System user; man
* Messages for package sys-apps/sysvinit-2.93:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package sys-apps/coreutils-8.31-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package app-crypt/gnupg-2.2.17:
* See https://wiki.gentoo.org/wiki/GnuPG for documentation on gnupg
*
* If you wish to use 'gpg-wks-client --send', you must install an MTA!
* Messages for package sys-apps/man-db-2.8.7:
* Defaulting to USE=gdbm due to ambiguous berkdb/gdbm USE flag settings
* ERROR: sys-apps/man-db-2.8.7::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-apps/man-db-2.8.7::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/man-db-2.8.7::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/man-db-2.8.7/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/man-db-2.8.7/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/man-db-2.8.7/work/man-db-2.8.7'
* S: '/var/tmp/portage/sys-apps/man-db-2.8.7/work/man-db-2.8.7'
17 Mar 2020 14:07:41 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
17 Mar 2020 14:07:42 UTC: ERROR : CatalystError: Stage build aborting due to error.
ERROR:catalyst:CatalystError: Stage build aborting due to error.
17 Mar 2020 14:07:42 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1366, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1375, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
ERROR:catalyst:Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1366, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1375, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
17 Mar 2020 14:07:42 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
17 Mar 2020 14:07:42 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20200317T123530Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20200317T123530Z/var/cache/binpkgs is not a mount point. Skipping
17 Mar 2020 14:07:42 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20200317T123530Z/run is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20200317T123530Z/run is not a mount point. Skipping
17 Mar 2020 14:07:42 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20200317T123530Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20200317T123530Z/dev/shm does not exist. Skipping
17 Mar 2020 14:07:42 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20200317T123530Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20200317T123530Z/dev/pts does not exist. Skipping
17 Mar 2020 14:07:42 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20200317T123530Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20200317T123530Z/var/tmp/portage is not a mount point. Skipping
17 Mar 2020 14:07:42 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20200317T123530Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20200317T123530Z/var/cache/distfiles is not a mount point. Skipping
17 Mar 2020 14:07:42 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20200317T123530Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20200317T123530Z/var/db/repos/gentoo is not a mount point. Skipping
17 Mar 2020 14:07:42 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20200317T123530Z/dev is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20200317T123530Z/dev is not a mount point. Skipping
17 Mar 2020 14:07:42 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20200317T123530Z/proc is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20200317T123530Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
2905.16user 908.64system 40:18.67elapsed 157%CPU (0avgtext+0avgdata 441884maxresident)k
187064inputs+2513896outputs (0major+135405720minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20200317T123530Z.Wna1wU/log/stage3.log
^ permalink raw reply [flat|nested] 25+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - stage3.spec
@ 2020-05-13 4:40 catalyst
0 siblings, 0 replies; 25+ messages in thread
From: catalyst @ 2020-05-13 4:40 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Installing (177 of 215) virtual/dev-manager-0-r2::gentoo
>>> Installing (178 of 215) dev-lang/python-3.7.7-r2::gentoo
>>> Emerging (179 of 215) dev-libs/libxml2-2.9.9-r3::gentoo
>>> Installing (179 of 215) dev-libs/libxml2-2.9.9-r3::gentoo
>>> Emerging (180 of 215) dev-util/meson-0.52.1::gentoo
>>> Emerging (181 of 215) dev-util/ninja-1.9.0::gentoo
>>> Emerging binary (182 of 215) dev-libs/libxslt-1.1.33-r1::gentoo
>>> Installing (182 of 215) dev-libs/libxslt-1.1.33-r1::gentoo
>>> Emerging binary (183 of 215) app-text/po4a-0.47-r1::gentoo
>>> Installing (183 of 215) app-text/po4a-0.47-r1::gentoo
>>> Emerging binary (184 of 215) app-text/build-docbook-catalog-1.21::gentoo
>>> Installing (184 of 215) app-text/build-docbook-catalog-1.21::gentoo
>>> Installing (180 of 215) dev-util/meson-0.52.1::gentoo
>>> Emerging (185 of 215) sys-apps/man-db-2.8.7::gentoo
>>> Emerging binary (186 of 215) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Installing (186 of 215) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Emerging binary (187 of 215) app-text/docbook-xml-dtd-4.1.2-r7::gentoo
>>> Installing (187 of 215) app-text/docbook-xml-dtd-4.1.2-r7::gentoo
>>> Emerging binary (188 of 215) app-text/docbook-xml-dtd-4.5-r2::gentoo
>>> Installing (188 of 215) app-text/docbook-xml-dtd-4.5-r2::gentoo
>>> Emerging binary (189 of 215) app-text/docbook-xml-dtd-4.3-r2::gentoo
>>> Installing (189 of 215) app-text/docbook-xml-dtd-4.3-r2::gentoo
>>> Emerging binary (190 of 215) app-text/docbook-xml-dtd-4.4-r3::gentoo
>>> Installing (190 of 215) app-text/docbook-xml-dtd-4.4-r3::gentoo
>>> Emerging (191 of 215) sys-libs/pam-1.3.1-r2::gentoo
>>> Installing (181 of 215) dev-util/ninja-1.9.0::gentoo
>>> Failed to emerge sys-apps/man-db-2.8.7
>>> Installing (191 of 215) sys-libs/pam-1.3.1-r2::gentoo
* Messages for package sys-fs/eudev-3.2.9:
*
* As of 2013-01-29, eudev-3.2.9 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package acct-group/man-0:
* Adding group 'man' to your system ...
* - Groupid: 15
* Messages for package sys-apps/opentmpfiles-0.2:
* Auto-adding 'opentmpfiles-dev' service to your sysinit runlevel
* Auto-adding 'opentmpfiles-setup' service to your boot runlevel
* Messages for package sys-apps/baselayout-2.6-r1:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package sys-libs/timezone-data-2020a:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package acct-user/man-1:
* Adding user 'man' to your system ...
* - Userid: 13
* - Shell: /sbin/nologin
* - Home: /dev/null
* - Groups: man
* - GECOS: added by portage for man
* Updating comment for user 'man' ...
* - Comment: System user; man
* Messages for package sys-apps/coreutils-8.31-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/sysvinit-2.93:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package sys-apps/busybox-1.31.1-r2:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.31.1-r2 has been saved in
* "/etc/portage/savedconfig/sys-apps/busybox-1.31.1-r2" for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package app-crypt/gnupg-2.2.19:
* See https://wiki.gentoo.org/wiki/GnuPG for documentation on gnupg
*
* If you wish to use 'gpg-wks-client --send', you must install an MTA!
* Messages for package sys-fs/eudev-3.2.9:
*
* For more information on eudev on Gentoo, writing udev rules, and
* fixing known issues visit: https://wiki.gentoo.org/wiki/Eudev
* Messages for package sys-fs/udev-init-scripts-33:
* Adding udev to the sysinit runlevel
* Adding udev-trigger to the sysinit runlevel
* Messages for package sys-apps/man-db-2.8.7:
* Defaulting to USE=gdbm due to ambiguous berkdb/gdbm USE flag settings
* ERROR: sys-apps/man-db-2.8.7::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-apps/man-db-2.8.7::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/man-db-2.8.7::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/man-db-2.8.7/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/man-db-2.8.7/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/man-db-2.8.7/work/man-db-2.8.7'
* S: '/var/tmp/portage/sys-apps/man-db-2.8.7/work/man-db-2.8.7'
* Messages for package sys-libs/pam-1.3.1-r2:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
13 May 2020 04:40:15 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
13 May 2020 04:40:15 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20200512T222123Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20200512T222123Z/var/tmp/portage is not a mount point. Skipping
13 May 2020 04:40:15 UTC: ERROR : CatalystError: Stage build aborting due to error.
ERROR:catalyst:CatalystError: Stage build aborting due to error.
13 May 2020 04:40:15 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1366, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1375, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
ERROR:catalyst:Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1366, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1375, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
13 May 2020 04:40:15 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
13 May 2020 04:40:15 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20200512T222123Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20200512T222123Z/var/cache/binpkgs is not a mount point. Skipping
13 May 2020 04:40:15 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20200512T222123Z/run is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20200512T222123Z/run is not a mount point. Skipping
13 May 2020 04:40:15 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20200512T222123Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20200512T222123Z/dev/shm does not exist. Skipping
13 May 2020 04:40:15 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20200512T222123Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20200512T222123Z/dev/pts does not exist. Skipping
13 May 2020 04:40:15 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20200512T222123Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20200512T222123Z/var/tmp/portage is not a mount point. Skipping
13 May 2020 04:40:15 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20200512T222123Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20200512T222123Z/var/cache/distfiles is not a mount point. Skipping
13 May 2020 04:40:15 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20200512T222123Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20200512T222123Z/var/db/repos/gentoo is not a mount point. Skipping
13 May 2020 04:40:15 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20200512T222123Z/dev is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20200512T222123Z/dev is not a mount point. Skipping
13 May 2020 04:40:15 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20200512T222123Z/proc is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20200512T222123Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4377.47user 1510.55system 53:39.98elapsed 182%CPU (0avgtext+0avgdata 260976maxresident)k
149656inputs+10377296outputs (1major+218777787minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20200512T222123Z.DaSxfq/log/stage3.log
^ permalink raw reply [flat|nested] 25+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - stage3.spec
@ 2020-12-15 2:57 catalyst
0 siblings, 0 replies; 25+ messages in thread
From: catalyst @ 2020-12-15 2:57 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Installing (201 of 227) dev-python/setuptools-50.3.0::gentoo
* Messages for package sys-fs/eudev-3.2.9:
*
* As of 2013-01-29, eudev-3.2.9 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package sys-apps/portage-3.0.9:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package acct-group/man-0:
* Adding group 'man' to your system ...
* - Groupid: 15
* Messages for package sys-apps/baselayout-2.7:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package acct-user/man-1:
* Adding user 'man' to your system ...
* - Userid: 13
* - Shell: /sbin/nologin
* - Home: /dev/null
* - Groups: man
* - GECOS: added by portage for man
* Updating comment for user 'man' ...
* - Comment: System user; man
* Messages for package sys-libs/timezone-data-2020d:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-apps/sysvinit-2.97:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package sys-apps/coreutils-8.32-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package net-firewall/iptables-1.8.5:
* Current iptables implementation is unset, setting to xtables-legacy-multi
* Messages for package sys-apps/man-db-2.9.3:
* Defaulting to USE=gdbm due to ambiguous berkdb/gdbm USE flag settings
* Messages for package sys-libs/pam-1.5.1:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-auth/pambase-20201103:
* To amend the existing password policy please see the man 5
* passwdqc.conf page and then edit the /etc/security/passwdqc.conf file
*
* (Note: Above message is only printed the first time package is
* installed. Please look at /usr/share/doc/pambase-20201103/README.gentoo*
* for future reference)
* Messages for package sys-apps/shadow-4.8-r5:
* Running 'grpck' returned errors. Please run it by hand, and then
* run 'grpconv' afterwards!
* Messages for package net-misc/netifrc-0.7.1-r1:
* The network configuration scripts will use dhcp by
* default to set up your interfaces.
* If you need to set up something more complete, see
* /usr/share/doc/netifrc-0.7.1/README
* Messages for package sys-fs/eudev-3.2.9:
*
* For more information on eudev on Gentoo, writing udev rules, and
* fixing known issues visit: https://wiki.gentoo.org/wiki/Eudev
* Messages for package sys-fs/udev-init-scripts-34:
* Adding udev to the sysinit runlevel
* Adding udev-trigger to the sysinit runlevel
* Messages for package sys-apps/util-linux-2.35.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/libxml2-2.9.10-r4:
* Skipping XML catalog creation for stage building (bug #208887).
* Messages for package app-text/po4a-0.57:
* ERROR: app-text/po4a-0.57::gentoo failed (compile phase):
* Compilation failed
*
* Call stack:
* ebuild.sh, line 125: Called src_compile
* environment, line 1153: Called perl-module_src_compile
* environment, line 682: Called die
* The specific snippet of code:
* ./Build build || die "Compilation failed";
*
* If you need support, post the output of `emerge --info '=app-text/po4a-0.57::gentoo'`,
* the complete build log and the output of `emerge -pqv '=app-text/po4a-0.57::gentoo'`.
* The complete build log is located at '/var/tmp/portage/app-text/po4a-0.57/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-text/po4a-0.57/temp/environment'.
* Working directory: '/var/tmp/portage/app-text/po4a-0.57/work/po4a-0.57'
* S: '/var/tmp/portage/app-text/po4a-0.57/work/po4a-0.57'
15 Dec 2020 02:57:41 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
15 Dec 2020 02:57:41 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20201214T214503Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20201214T214503Z/var/tmp/portage is not a mount point. Skipping
15 Dec 2020 02:57:41 UTC: ERROR : CatalystError: Stage build aborting due to error.
ERROR:catalyst:CatalystError: Stage build aborting due to error.
15 Dec 2020 02:57:41 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1409, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1514, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1418, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
ERROR:catalyst:Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1409, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1514, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1418, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
15 Dec 2020 02:57:41 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
15 Dec 2020 02:57:41 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20201214T214503Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20201214T214503Z/tmp/kerncache is not a mount point. Skipping
15 Dec 2020 02:57:41 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20201214T214503Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20201214T214503Z/var/cache/binpkgs is not a mount point. Skipping
15 Dec 2020 02:57:41 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20201214T214503Z/run is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20201214T214503Z/run is not a mount point. Skipping
15 Dec 2020 02:57:41 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20201214T214503Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20201214T214503Z/dev/shm does not exist. Skipping
15 Dec 2020 02:57:41 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20201214T214503Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20201214T214503Z/dev/pts does not exist. Skipping
15 Dec 2020 02:57:41 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20201214T214503Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20201214T214503Z/var/tmp/portage is not a mount point. Skipping
15 Dec 2020 02:57:41 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20201214T214503Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20201214T214503Z/var/cache/distfiles is not a mount point. Skipping
15 Dec 2020 02:57:41 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20201214T214503Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20201214T214503Z/var/db/repos/gentoo is not a mount point. Skipping
15 Dec 2020 02:57:41 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20201214T214503Z/dev is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20201214T214503Z/dev is not a mount point. Skipping
15 Dec 2020 02:57:41 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage3-i486-20201214T214503Z/proc is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage3-i486-20201214T214503Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
2166.21user 758.64system 30:45.55elapsed 158%CPU (0avgtext+0avgdata 122832maxresident)k
247832inputs+4516760outputs (3major+115583017minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20201214T214503Z.QTGX0s/log/stage3.log
^ permalink raw reply [flat|nested] 25+ messages in thread
end of thread, other threads:[~2020-12-15 2:57 UTC | newest]
Thread overview: 25+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-01-03 5:23 [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - stage3.spec catalyst
-- strict thread matches above, loose matches on Subject: below --
2020-12-15 2:57 catalyst
2020-05-13 4:40 catalyst
2020-03-17 14:07 catalyst
2018-04-18 4:11 catalyst
2018-04-11 4:12 catalyst
2018-04-04 4:11 catalyst
2018-02-21 4:27 catalyst
2018-02-14 4:33 catalyst
2018-02-07 5:21 catalyst
2018-01-31 5:39 catalyst
2018-01-17 5:14 catalyst
2018-01-10 3:43 catalyst
2017-12-27 23:08 catalyst
2017-12-27 5:42 catalyst
2017-12-20 5:40 catalyst
2015-11-25 5:49 catalyst
2015-07-29 6:05 catalyst
2015-03-18 5:28 catalyst
2014-12-10 6:38 catalyst
2012-08-28 10:46 catalyst
2012-01-17 11:08 catalyst
2011-12-27 9:05 catalyst
2011-12-20 9:06 catalyst
2011-05-10 9:04 catalyst
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox