* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - hardened/stage3.spec
@ 2017-12-20 11:09 catalyst
0 siblings, 0 replies; 24+ messages in thread
From: catalyst @ 2017-12-20 11:09 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
20 Dec 2017 10:59:10 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
20 Dec 2017 10:59:10 UTC: NOTICE : Processing spec file: hardened/stage3.spec
20 Dec 2017 10:59:10 UTC: NOTICE : Using target: stage3
20 Dec 2017 10:59:11 UTC: NOTICE : Source file specification matching setting is: loose
20 Dec 2017 10:59:11 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
20 Dec 2017 10:59:11 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/hardened/stage2-i686-hardened-20171220T030001Z.tar.xz
20 Dec 2017 10:59:11 UTC: NOTICE : --- Running action sequence: unpack
20 Dec 2017 10:59:11 UTC: NOTICE : Clearing the chroot path ...
20 Dec 2017 10:59:11 UTC: NOTICE : Emptying directory: /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20171220T030001Z
20 Dec 2017 10:59:11 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/hardened/stage2-i686-hardened-20171220T030001Z.tar.xz
20 Dec 2017 10:59:11 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20171220T030001Z (this may take some time) ..
20 Dec 2017 10:59:13 UTC: NOTICE : --- Running action sequence: unpack_snapshot
20 Dec 2017 10:59:13 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
20 Dec 2017 10:59:27 UTC: NOTICE : --- Running action sequence: setup_confdir
20 Dec 2017 10:59:27 UTC: NOTICE : --- Running action sequence: portage_overlay
20 Dec 2017 10:59:27 UTC: NOTICE : --- Running action sequence: base_dirs
20 Dec 2017 10:59:27 UTC: NOTICE : --- Running action sequence: bind
20 Dec 2017 10:59:27 UTC: NOTICE : --- Running action sequence: chroot_setup
20 Dec 2017 10:59:27 UTC: NOTICE : Setting up chroot...
20 Dec 2017 10:59:27 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
20 Dec 2017 10:59:27 UTC: WARNING : If your build fails look here first as the possible problem.
20 Dec 2017 10:59:27 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
20 Dec 2017 10:59:27 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
20 Dec 2017 10:59:27 UTC: WARNING : You have been warned.
20 Dec 2017 10:59:27 UTC: NOTICE : Writing the stage make.conf to: /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20171220T030001Z/etc/portage/make.conf
20 Dec 2017 10:59:27 UTC: NOTICE : STICKY-CONFIG is enabled
20 Dec 2017 10:59:27 UTC: NOTICE : --- Running action sequence: setup_environment
20 Dec 2017 10:59:27 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20171220T030001Z/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20171220T030001Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20171220T030001Z /tmp/stage3-chroot.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 10) app-misc/mime-types-9::gentoo
>>> Installing (1 of 10) app-misc/mime-types-9::gentoo
>>> Emerging (2 of 10) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (2 of 10) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging (3 of 10) sys-apps/debianutils-4.7::gentoo
>>> Installing (3 of 10) sys-apps/debianutils-4.7::gentoo
>>> Emerging (4 of 10) sys-libs/gdbm-1.11::gentoo
>>> Installing (4 of 10) sys-libs/gdbm-1.11::gentoo
>>> Emerging (5 of 10) dev-libs/openssl-1.0.2n::gentoo
>>> Installing (5 of 10) dev-libs/openssl-1.0.2n::gentoo
>>> Emerging (6 of 10) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Installing (6 of 10) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Emerging (7 of 10) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (7 of 10) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (8 of 10) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (8 of 10) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (9 of 10) dev-python/pyblake2-0.9.3-r1::gentoo
>>> Installing (9 of 10) dev-python/pyblake2-0.9.3-r1::gentoo
>>> Emerging (10 of 10) sys-apps/portage-2.3.13-r1::gentoo
>>> Installing (10 of 10) sys-apps/portage-2.3.13-r1::gentoo
* Messages for package app-misc/ca-certificates-20161130.3.30.2:
* You should run update-ca-certificates manually after etc-update
* To prevent applications relying on system's trusted root certificate store
* from using CAs where at least one major browser vendor Gentoo is following
* has decided to apply trust level restrictions, the following
* certificate(s) were removed:
* mozilla/StartCom_Certification_Authority.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign_China.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/Certification_Authority_of_WoSign_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/CA_WoSign_ECC_Root.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign.crt removed; see https://bugs.gentoo.org/598072 for details
* Messages for package dev-python/pyblake2-0.9.3-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-apps/portage-2.3.13-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
emerge --quiet --usepkg --buildpkg --newuse -e --update --deep --with-bdeps=y @system
[nomerge ] sys-fs/e2fsprogs-1.43.6::gentoo USE="nls -fuse -static-libs"
[nomerge ] sys-libs/e2fsprogs-libs-1.43.6::gentoo USE="nls -static-libs"
[nomerge ] virtual/pkgconfig-0-r1::gentoo
[nomerge ] dev-util/pkgconfig-0.29.2::gentoo USE="hardened -internal-glib*"
[nomerge ] dev-libs/glib-2.50.3-r1:2::gentoo USE="mime xattr -dbus -debug (-fam) (-selinux) -static-libs -systemtap {-test} -utils" PYTHON_TARGETS="python2_7"
[ebuild N ] x11-misc/shared-mime-info-1.8::gentoo USE="{-test}" 0 KiB
[ebuild R ] dev-util/pkgconfig-0.29.2::gentoo USE="hardened -internal-glib*" 0 KiB
[ebuild N ] dev-libs/glib-2.50.3-r1:2::gentoo USE="mime xattr -dbus -debug (-fam) (-selinux) -static-libs -systemtap {-test} -utils" PYTHON_TARGETS="python2_7" 0 KiB
[ebuild N ] virtual/service-manager-0::gentoo USE="(-prefix)" 0 KiB
[nomerge ] sys-apps/openrc-0.34.11::gentoo USE="ncurses netifrc pam unicode -audit -debug -newnet (-prefix) (-selinux) -static-libs"
[ebuild N ] net-misc/netifrc-0.5.1::gentoo 0 KiB
[ebuild N ] sys-apps/openrc-0.34.11::gentoo USE="ncurses netifrc pam unicode -audit -debug -newnet (-prefix) (-selinux) -static-libs" 0 KiB
[ebuild N ] virtual/dev-manager-0::gentoo 0 KiB
[nomerge ] sys-apps/hwids-20170328::gentoo USE="net pci udev usb"
[nomerge ] virtual/udev-217::gentoo USE="-systemd"
[ebuild N ] sys-fs/eudev-3.1.5::gentoo USE="hwdb kmod -introspection -rule-generator (-selinux) -static-libs {-test}" 0 KiB
[ebuild N ] sys-apps/hwids-20170328::gentoo USE="net pci udev usb" 0 KiB
[ebuild N ] sys-fs/udev-init-scripts-32::gentoo 0 KiB
[ebuild N ] virtual/udev-217::gentoo USE="-systemd" 0 KiB
[ebuild N ] virtual/ssh-0::gentoo USE="-minimal" 0 KiB
[ebuild N ] net-misc/openssh-7.5_p1-r3::gentoo USE="bindist hpn pam (pie) ssl -X -X509 -audit -debug -kerberos -ldap -ldns -libedit -libressl -livecd -sctp (-selinux) -skey -ssh1 -static {-test}" 0 KiB
[nomerge ] virtual/shadow-0::gentoo
[ebuild R ] sys-apps/shadow-4.5::gentoo USE="acl* cracklib* nls* pam* xattr* -audit (-selinux) -skey" LINGUAS="-cs -da -de -es -fi -fr -hu -id -it -ja -ko -pl -pt_BR -ru -sv -tr -zh_CN -zh_TW" 0 KiB
[nomerge ] sys-apps/util-linux-2.30.2::gentoo USE="cramfs ncurses nls pam readline suid unicode -build -caps -fdformat -kill -python (-selinux) -slang -static-libs -systemd {-test} -tty-helpers -udev" PYTHON_SINGLE_TARGET="python3_5 -python2_7 -python3_4 -python3_6" PYTHON_TARGETS="python2_7 python3_5 -python3_4 -python3_6"
[ebuild N ] sys-libs/pam-1.2.1-r2::gentoo USE="berkdb cracklib filecaps nls (pie) -audit -debug -nis (-selinux) {-test}" 0 KiB
[ebuild N ] sys-auth/pambase-20150213::gentoo USE="cracklib nullok sha512 -consolekit -debug -gnome-keyring -minimal -mktemp -pam_krb5 -pam_ssh -passwdqc -securetty (-selinux) -systemd" 0 KiB
[ebuild N ] sys-apps/man-pages-4.09::gentoo USE="nls" L10N="-da -de -fr -it -ja -nl -pl -ro -ru -zh-CN" 0 KiB
[ebuild N ] sys-apps/man-pages-posix-2013a::gentoo 0 KiB
[ebuild N ] virtual/man-0-r1::gentoo 0 KiB
[ebuild N ] sys-apps/man-db-2.7.6.1-r2::gentoo USE="berkdb gdbm manpager nls zlib (-selinux) -static-libs" 0 KiB
[ebuild N ] app-text/po4a-0.47-r1::gentoo USE="{-test}" LINGUAS="-af -ca -cs -da -de -eo -es -et -eu -fr -hr -id -it -ja -kn -ko -nb -nl -pl -pt -pt_BR -ru -sl -sv -uk -vi -zh_CN -zh_HK" 0 KiB
[ebuild N ] app-text/docbook-xml-dtd-4.1.2-r6:4.1.2::gentoo 0 KiB
[ebuild N ] app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo USE="-ruby" 0 KiB
[ebuild N ] app-text/build-docbook-catalog-1.19.1::gentoo 0 KiB
[ebuild N ] sys-fs/e2fsprogs-1.43.6::gentoo USE="nls -fuse -static-libs" 0 KiB
[ebuild N ] sys-apps/util-linux-2.30.2::gentoo USE="cramfs ncurses nls pam readline suid unicode -build -caps -fdformat -kill -python (-selinux) -slang -static-libs -systemd {-test} -tty-helpers -udev" PYTHON_SINGLE_TARGET="python3_5 -python2_7 -python3_4 -python3_6" PYTHON_TARGETS="python2_7 python3_5 -python3_4 -python3_6" 0 KiB
[nomerge ] sys-apps/shadow-4.5::gentoo USE="acl* cracklib* nls* pam* xattr* -audit (-selinux) -skey" LINGUAS="-cs -da -de -es -fi -fr -hu -id -it -ja -ko -pl -pt_BR -ru -sv -tr -zh_CN -zh_TW"
[nomerge ] virtual/pam-0-r1::gentoo
[nomerge ] sys-libs/pam-1.2.1-r2::gentoo USE="berkdb cracklib filecaps nls (pie) -audit -debug -nis (-selinux) {-test}"
[ebuild N ] sys-libs/libcap-2.24-r2::gentoo USE="pam -static-libs" 0 KiB
[ebuild N ] sys-apps/kbd-2.0.3::gentoo USE="nls pam {-test}" 0 KiB
[ebuild N ] virtual/pam-0-r1::gentoo 0 KiB
Total: 29 packages (27 new, 2 reinstalls), Size of downloads: 0 KiB
* Error: circular dependencies:
(sys-libs/pam-1.2.1-r2:0/0::gentoo, ebuild scheduled for merge) depends on
(sys-libs/libcap-2.24-r2:0/0::gentoo, ebuild scheduled for merge) (buildtime)
(virtual/pam-0-r1:0/0::gentoo, ebuild scheduled for merge) (buildtime)
(sys-libs/pam-1.2.1-r2:0/0::gentoo, ebuild scheduled for merge) (runtime)
It might be possible to break this cycle
by applying any of the following changes:
- sys-libs/pam-1.2.1-r2 (Change USE: -filecaps)
- sys-libs/libcap-2.24-r2 (Change USE: -pam)
Note that this change can be reverted, once the package has been installed.
20 Dec 2017 11:09:12 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
20 Dec 2017 11:09:12 UTC: ERROR : CatalystError: Stage build aborting due to error.
20 Dec 2017 11:09:12 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1437, in run
getattr(self, x)()
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1346, in run_local
print_traceback=False)
CatalystError
20 Dec 2017 11:09:12 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
499.94user 107.22system 10:01.61elapsed 100%CPU (0avgtext+0avgdata 323052maxresident)k
16inputs+4122592outputs (0major+40131097minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20171220T030001Z.0rdUl7/log/hardened_stage3.log
^ permalink raw reply [flat|nested] 24+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - hardened/stage3.spec
@ 2020-12-15 13:05 catalyst
0 siblings, 0 replies; 24+ messages in thread
From: catalyst @ 2020-12-15 13:05 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging binary (190 of 228) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Installing (190 of 228) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Emerging binary (191 of 228) app-text/docbook-xml-dtd-4.1.2-r7::gentoo
>>> Installing (191 of 228) app-text/docbook-xml-dtd-4.1.2-r7::gentoo
>>> Emerging binary (192 of 228) app-text/docbook-xml-dtd-4.2-r3::gentoo
>>> Installing (192 of 228) app-text/docbook-xml-dtd-4.2-r3::gentoo
>>> Emerging binary (193 of 228) app-text/docbook-xml-dtd-4.5-r2::gentoo
>>> Installing (193 of 228) app-text/docbook-xml-dtd-4.5-r2::gentoo
>>> Emerging (194 of 228) app-text/po4a-0.57::gentoo
>>> Emerging (195 of 228) dev-python/setuptools-50.3.0::gentoo
>>> Failed to emerge app-text/po4a-0.57
>>> Installing (195 of 228) dev-python/setuptools-50.3.0::gentoo
* Messages for package sys-apps/portage-3.0.9:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-fs/eudev-3.2.9:
*
* As of 2013-01-29, eudev-3.2.9 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package acct-group/man-0:
* Adding group 'man' to your system ...
* - Groupid: 15
* Messages for package sys-apps/baselayout-2.7:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package acct-user/man-1:
* Adding user 'man' to your system ...
* - Userid: 13
* - Shell: /sbin/nologin
* - Home: /dev/null
* - Groups: man
* - GECOS: added by portage for man
* Updating comment for user 'man' ...
* - Comment: System user; man
* Messages for package sys-libs/timezone-data-2020d:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-apps/sysvinit-2.97:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package sys-apps/coreutils-8.32-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/man-db-2.9.3:
* Defaulting to USE=gdbm due to ambiguous berkdb/gdbm USE flag settings
* Messages for package net-firewall/iptables-1.8.5:
* Current iptables implementation is unset, setting to xtables-legacy-multi
* Messages for package sys-libs/pam-1.5.1:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-auth/pambase-20201103:
* To amend the existing password policy please see the man 5
* passwdqc.conf page and then edit the /etc/security/passwdqc.conf file
*
* (Note: Above message is only printed the first time package is
* installed. Please look at /usr/share/doc/pambase-20201103/README.gentoo*
* for future reference)
* Messages for package sys-apps/shadow-4.8-r5:
* Running 'grpck' returned errors. Please run it by hand, and then
* run 'grpconv' afterwards!
* Messages for package net-misc/netifrc-0.7.1-r1:
* The network configuration scripts will use dhcp by
* default to set up your interfaces.
* If you need to set up something more complete, see
* /usr/share/doc/netifrc-0.7.1/README
* Messages for package sys-apps/util-linux-2.35.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/libxml2-2.9.10-r4:
* Skipping XML catalog creation for stage building (bug #208887).
* Messages for package app-text/po4a-0.57:
* ERROR: app-text/po4a-0.57::gentoo failed (compile phase):
* Compilation failed
*
* Call stack:
* ebuild.sh, line 125: Called src_compile
* environment, line 1155: Called perl-module_src_compile
* environment, line 684: Called die
* The specific snippet of code:
* ./Build build || die "Compilation failed";
*
* If you need support, post the output of `emerge --info '=app-text/po4a-0.57::gentoo'`,
* the complete build log and the output of `emerge -pqv '=app-text/po4a-0.57::gentoo'`.
* The complete build log is located at '/var/tmp/portage/app-text/po4a-0.57/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-text/po4a-0.57/temp/environment'.
* Working directory: '/var/tmp/portage/app-text/po4a-0.57/work/po4a-0.57'
* S: '/var/tmp/portage/app-text/po4a-0.57/work/po4a-0.57'
15 Dec 2020 13:05:12 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
15 Dec 2020 13:05:12 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20201214T214503Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20201214T214503Z/var/tmp/portage is not a mount point. Skipping
15 Dec 2020 13:05:13 UTC: ERROR : CatalystError: Stage build aborting due to error.
ERROR:catalyst:CatalystError: Stage build aborting due to error.
15 Dec 2020 13:05:13 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1409, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1514, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1418, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
ERROR:catalyst:Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1409, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1514, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1418, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
15 Dec 2020 13:05:13 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
15 Dec 2020 13:05:13 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20201214T214503Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20201214T214503Z/tmp/kerncache is not a mount point. Skipping
15 Dec 2020 13:05:13 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20201214T214503Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20201214T214503Z/var/cache/binpkgs is not a mount point. Skipping
15 Dec 2020 13:05:13 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20201214T214503Z/run is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20201214T214503Z/run is not a mount point. Skipping
15 Dec 2020 13:05:13 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20201214T214503Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20201214T214503Z/dev/shm does not exist. Skipping
15 Dec 2020 13:05:13 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20201214T214503Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20201214T214503Z/dev/pts does not exist. Skipping
15 Dec 2020 13:05:13 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20201214T214503Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20201214T214503Z/var/tmp/portage is not a mount point. Skipping
15 Dec 2020 13:05:13 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20201214T214503Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20201214T214503Z/var/cache/distfiles is not a mount point. Skipping
15 Dec 2020 13:05:13 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20201214T214503Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20201214T214503Z/var/db/repos/gentoo is not a mount point. Skipping
15 Dec 2020 13:05:13 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20201214T214503Z/dev is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20201214T214503Z/dev is not a mount point. Skipping
15 Dec 2020 13:05:13 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20201214T214503Z/proc is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20201214T214503Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
2174.02user 743.03system 30:46.68elapsed 157%CPU (0avgtext+0avgdata 122188maxresident)k
209216inputs+4349776outputs (0major+119009062minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20201214T214503Z.QTGX0s/log/hardened_stage3.log
^ permalink raw reply [flat|nested] 24+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - hardened/stage3.spec
@ 2020-05-13 16:30 catalyst
0 siblings, 0 replies; 24+ messages in thread
From: catalyst @ 2020-05-13 16:30 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Installing (170 of 216) net-misc/wget-1.20.3-r1::gentoo
>>> Installing (171 of 216) sys-apps/diffutils-3.6-r1::gentoo
>>> Installing (173 of 216) sys-apps/grep-3.3-r1::gentoo
>>> Installing (169 of 216) app-editors/nano-4.6-r1::gentoo
>>> Installing (181 of 216) dev-lang/python-3.7.7-r2::gentoo
>>> Installing (172 of 216) sys-apps/gawk-4.2.1-r1::gentoo
>>> Emerging binary (182 of 216) virtual/editor-0-r3::gentoo
>>> Installing (182 of 216) virtual/editor-0-r3::gentoo
>>> Emerging (183 of 216) dev-libs/libxml2-2.9.9-r3::gentoo
>>> Installing (183 of 216) dev-libs/libxml2-2.9.9-r3::gentoo
>>> Emerging (184 of 216) dev-python/pypax-0.9.5::gentoo
>>> Emerging (185 of 216) dev-util/meson-0.52.1::gentoo
>>> Emerging (186 of 216) dev-util/ninja-1.9.0::gentoo
>>> Emerging binary (187 of 216) dev-libs/libxslt-1.1.33-r1::gentoo
>>> Installing (187 of 216) dev-libs/libxslt-1.1.33-r1::gentoo
>>> Emerging binary (188 of 216) app-text/po4a-0.47-r1::gentoo
>>> Installing (188 of 216) app-text/po4a-0.47-r1::gentoo
>>> Emerging (189 of 216) sys-libs/pam-1.3.1-r2::gentoo
>>> Installing (185 of 216) dev-util/meson-0.52.1::gentoo
>>> Installing (186 of 216) dev-util/ninja-1.9.0::gentoo
>>> Installing (184 of 216) dev-python/pypax-0.9.5::gentoo
>>> Installing (189 of 216) sys-libs/pam-1.3.1-r2::gentoo
>>> Emerging (190 of 216) net-misc/iputils-20190709-r1::gentoo
>>> Installing (190 of 216) net-misc/iputils-20190709-r1::gentoo
>>> Emerging binary (191 of 216) sys-apps/elfix-0.9.5::gentoo
>>> Installing (191 of 216) sys-apps/elfix-0.9.5::gentoo
>>> Emerging (192 of 216) sys-apps/man-db-2.8.7::gentoo
>>> Failed to emerge sys-apps/man-db-2.8.7
* Messages for package sys-fs/eudev-3.2.9:
*
* As of 2013-01-29, eudev-3.2.9 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package acct-group/man-0:
* Adding group 'man' to your system ...
* - Groupid: 15
* Messages for package sys-apps/opentmpfiles-0.2:
* Auto-adding 'opentmpfiles-dev' service to your sysinit runlevel
* Auto-adding 'opentmpfiles-setup' service to your boot runlevel
* Messages for package sys-apps/baselayout-2.6-r1:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package sys-libs/timezone-data-2020a:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package acct-user/man-1:
* Adding user 'man' to your system ...
* - Userid: 13
* - Shell: /sbin/nologin
* - Home: /dev/null
* - Groups: man
* - GECOS: added by portage for man
* Updating comment for user 'man' ...
* - Comment: System user; man
* Messages for package sys-apps/coreutils-8.31-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/sysvinit-2.93:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package sys-fs/eudev-3.2.9:
*
* For more information on eudev on Gentoo, writing udev rules, and
* fixing known issues visit: https://wiki.gentoo.org/wiki/Eudev
* Messages for package sys-fs/udev-init-scripts-33:
* Adding udev to the sysinit runlevel
* Adding udev-trigger to the sysinit runlevel
* Messages for package app-crypt/gnupg-2.2.19:
* See https://wiki.gentoo.org/wiki/GnuPG for documentation on gnupg
*
* If you wish to use 'gpg-wks-client --send', you must install an MTA!
* Messages for package sys-apps/busybox-1.31.1-r2:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.31.1-r2 has been saved in
* "/etc/portage/savedconfig/sys-apps/busybox-1.31.1-r2" for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package sys-libs/pam-1.3.1-r2:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-apps/man-db-2.8.7:
* Defaulting to USE=gdbm due to ambiguous berkdb/gdbm USE flag settings
* ERROR: sys-apps/man-db-2.8.7::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-apps/man-db-2.8.7::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/man-db-2.8.7::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/man-db-2.8.7/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/man-db-2.8.7/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/man-db-2.8.7/work/man-db-2.8.7'
* S: '/var/tmp/portage/sys-apps/man-db-2.8.7/work/man-db-2.8.7'
13 May 2020 16:30:18 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
13 May 2020 16:30:18 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200512T222123Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200512T222123Z/var/tmp/portage is not a mount point. Skipping
13 May 2020 16:30:18 UTC: ERROR : CatalystError: Stage build aborting due to error.
ERROR:catalyst:CatalystError: Stage build aborting due to error.
13 May 2020 16:30:18 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1366, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1375, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
ERROR:catalyst:Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1366, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1375, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
13 May 2020 16:30:18 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
13 May 2020 16:30:18 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200512T222123Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200512T222123Z/var/cache/binpkgs is not a mount point. Skipping
13 May 2020 16:30:18 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200512T222123Z/run is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200512T222123Z/run is not a mount point. Skipping
13 May 2020 16:30:18 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200512T222123Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200512T222123Z/dev/shm does not exist. Skipping
13 May 2020 16:30:18 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200512T222123Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200512T222123Z/dev/pts does not exist. Skipping
13 May 2020 16:30:18 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200512T222123Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200512T222123Z/var/tmp/portage is not a mount point. Skipping
13 May 2020 16:30:18 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200512T222123Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200512T222123Z/var/cache/distfiles is not a mount point. Skipping
13 May 2020 16:30:18 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200512T222123Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200512T222123Z/var/db/repos/gentoo is not a mount point. Skipping
13 May 2020 16:30:18 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200512T222123Z/dev is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200512T222123Z/dev is not a mount point. Skipping
13 May 2020 16:30:18 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200512T222123Z/proc is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200512T222123Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
4214.54user 1484.64system 55:07.32elapsed 172%CPU (0avgtext+0avgdata 282472maxresident)k
133096inputs+9530592outputs (0major+215159391minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20200512T222123Z.DaSxfq/log/hardened_stage3.log
^ permalink raw reply [flat|nested] 24+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - hardened/stage3.spec
@ 2020-03-17 17:04 catalyst
0 siblings, 0 replies; 24+ messages in thread
From: catalyst @ 2020-03-17 17:04 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Installing (117 of 215) sys-apps/grep-3.3-r1::gentoo
>>> Installing (114 of 215) sys-apps/findutils-4.7.0::gentoo
>>> Emerging binary (145 of 215) net-misc/wget-1.20.3-r1::gentoo
>>> Installing (145 of 215) net-misc/wget-1.20.3-r1::gentoo
>>> Emerging binary (146 of 215) virtual/perl-JSON-PP-4.20.0::gentoo
>>> Installing (146 of 215) virtual/perl-JSON-PP-4.20.0::gentoo
>>> Emerging binary (147 of 215) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Installing (147 of 215) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Emerging binary (148 of 215) virtual/perl-File-Temp-0.230.900::gentoo
>>> Installing (148 of 215) virtual/perl-File-Temp-0.230.900::gentoo
>>> Emerging binary (149 of 215) dev-perl/TermReadKey-2.370.0::gentoo
>>> Installing (149 of 215) dev-perl/TermReadKey-2.370.0::gentoo
>>> Emerging binary (150 of 215) dev-perl/Text-WrapI18N-0.60.0-r1::gentoo
>>> Emerging binary (151 of 215) dev-perl/Unicode-EastAsianWidth-1.330.0-r1::gentoo
>>> Emerging binary (152 of 215) dev-perl/Text-Unidecode-1.300.0::gentoo
>>> Emerging binary (153 of 215) dev-perl/Class-Inspector-1.320.0::gentoo
>>> Installing (150 of 215) dev-perl/Text-WrapI18N-0.60.0-r1::gentoo
>>> Emerging binary (154 of 215) dev-perl/File-ShareDir-Install-0.110.0::gentoo
>>> Emerging binary (155 of 215) dev-util/intltool-0.51.0-r2::gentoo
>>> Installing (151 of 215) dev-perl/Unicode-EastAsianWidth-1.330.0-r1::gentoo
>>> Installing (152 of 215) dev-perl/Text-Unidecode-1.300.0::gentoo
>>> Emerging binary (156 of 215) virtual/perl-CPAN-Meta-2.150.10-r3::gentoo
>>> Emerging binary (157 of 215) sys-apps/help2man-1.47.10::gentoo
>>> Installing (153 of 215) dev-perl/Class-Inspector-1.320.0::gentoo
>>> Installing (154 of 215) dev-perl/File-ShareDir-Install-0.110.0::gentoo
>>> Installing (155 of 215) dev-util/intltool-0.51.0-r2::gentoo
>>> Installing (156 of 215) virtual/perl-CPAN-Meta-2.150.10-r3::gentoo
>>> Installing (157 of 215) sys-apps/help2man-1.47.10::gentoo
>>> Emerging binary (158 of 215) dev-perl/Module-Build-0.422.400::gentoo
>>> Installing (158 of 215) dev-perl/Module-Build-0.422.400::gentoo
>>> Emerging binary (159 of 215) dev-perl/File-ShareDir-1.104.0::gentoo
>>> Emerging binary (160 of 215) sys-devel/automake-1.16.1-r1::gentoo
>>> Installing (159 of 215) dev-perl/File-ShareDir-1.104.0::gentoo
>>> Installing (160 of 215) sys-devel/automake-1.16.1-r1::gentoo
>>> Emerging binary (161 of 215) dev-perl/SGMLSpm-1.1-r1::gentoo
>>> Installing (161 of 215) dev-perl/SGMLSpm-1.1-r1::gentoo
>>> Emerging binary (162 of 215) dev-perl/libintl-perl-1.310.0::gentoo
>>> Emerging binary (163 of 215) sys-devel/libtool-2.4.6-r6::gentoo
>>> Installing (162 of 215) dev-perl/libintl-perl-1.310.0::gentoo
>>> Installing (163 of 215) sys-devel/libtool-2.4.6-r6::gentoo
>>> Emerging binary (164 of 215) sys-apps/texinfo-6.6-r1::gentoo
>>> Installing (164 of 215) sys-apps/texinfo-6.6-r1::gentoo
>>> Emerging (165 of 215) net-libs/libtirpc-1.2.5::gentoo
>>> Emerging (166 of 215) virtual/libcrypt-1::gentoo
>>> Installing (165 of 215) net-libs/libtirpc-1.2.5::gentoo
>>> Installing (166 of 215) virtual/libcrypt-1::gentoo
>>> Emerging binary (167 of 215) net-libs/libnsl-1.2.0::gentoo
>>> Installing (167 of 215) net-libs/libnsl-1.2.0::gentoo
>>> Emerging binary (168 of 215) dev-lang/python-3.6.10::gentoo
>>> Installing (168 of 215) dev-lang/python-3.6.10::gentoo
>>> Emerging binary (169 of 215) app-text/opensp-1.5.2-r3::gentoo
>>> Installing (169 of 215) app-text/opensp-1.5.2-r3::gentoo
>>> Emerging binary (170 of 215) dev-lang/python-2.7.17-r1::gentoo
>>> Installing (170 of 215) dev-lang/python-2.7.17-r1::gentoo
>>> Emerging binary (171 of 215) app-text/openjade-1.3.2-r9::gentoo
>>> Installing (171 of 215) app-text/openjade-1.3.2-r9::gentoo
>>> Emerging binary (172 of 215) dev-python/bz2file-0.98::gentoo
>>> Installing (172 of 215) dev-python/bz2file-0.98::gentoo
>>> Emerging binary (173 of 215) app-text/po4a-0.47-r1::gentoo
>>> Installing (173 of 215) app-text/po4a-0.47-r1::gentoo
>>> Emerging binary (174 of 215) dev-python/certifi-2019.11.28::gentoo
>>> Installing (174 of 215) dev-python/certifi-2019.11.28::gentoo
>>> Emerging (175 of 215) sys-apps/man-db-2.8.7::gentoo
>>> Emerging binary (176 of 215) dev-python/setuptools-44.0.0::gentoo
>>> Failed to emerge sys-apps/man-db-2.8.7
>>> Installing (176 of 215) dev-python/setuptools-44.0.0::gentoo
* Messages for package sys-fs/eudev-3.2.9:
*
* As of 2013-01-29, eudev-3.2.9 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package acct-group/man-0:
* Adding group 'man' to your system ...
* - Groupid: 15
* Messages for package sys-apps/opentmpfiles-0.2:
* Auto-adding 'opentmpfiles-dev' service to your sysinit runlevel
* Auto-adding 'opentmpfiles-setup' service to your boot runlevel
* Messages for package sys-apps/baselayout-2.6-r1:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package sys-libs/timezone-data-2019c:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package acct-user/man-1:
* Adding user 'man' to your system ...
* - Userid: 13
* - Shell: /sbin/nologin
* - Home: /dev/null
* - Groups: man
* - GECOS: added by portage for man
* Updating comment for user 'man' ...
* - Comment: System user; man
* Messages for package sys-apps/sysvinit-2.93:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package sys-apps/coreutils-8.31-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package app-crypt/gnupg-2.2.17:
* See https://wiki.gentoo.org/wiki/GnuPG for documentation on gnupg
*
* If you wish to use 'gpg-wks-client --send', you must install an MTA!
* Messages for package sys-apps/man-db-2.8.7:
* Defaulting to USE=gdbm due to ambiguous berkdb/gdbm USE flag settings
* ERROR: sys-apps/man-db-2.8.7::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-apps/man-db-2.8.7::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/man-db-2.8.7::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/man-db-2.8.7/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/man-db-2.8.7/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/man-db-2.8.7/work/man-db-2.8.7'
* S: '/var/tmp/portage/sys-apps/man-db-2.8.7/work/man-db-2.8.7'
17 Mar 2020 17:04:55 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
17 Mar 2020 17:04:56 UTC: ERROR : CatalystError: Stage build aborting due to error.
ERROR:catalyst:CatalystError: Stage build aborting due to error.
17 Mar 2020 17:04:56 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1366, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1375, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
ERROR:catalyst:Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1366, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1375, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
17 Mar 2020 17:04:56 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
17 Mar 2020 17:04:56 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200317T123530Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200317T123530Z/var/cache/binpkgs is not a mount point. Skipping
17 Mar 2020 17:04:56 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200317T123530Z/run is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200317T123530Z/run is not a mount point. Skipping
17 Mar 2020 17:04:56 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200317T123530Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200317T123530Z/dev/shm does not exist. Skipping
17 Mar 2020 17:04:56 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200317T123530Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200317T123530Z/dev/pts does not exist. Skipping
17 Mar 2020 17:04:56 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200317T123530Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200317T123530Z/var/tmp/portage is not a mount point. Skipping
17 Mar 2020 17:04:56 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200317T123530Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200317T123530Z/var/cache/distfiles is not a mount point. Skipping
17 Mar 2020 17:04:56 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200317T123530Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200317T123530Z/var/db/repos/gentoo is not a mount point. Skipping
17 Mar 2020 17:04:56 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200317T123530Z/dev is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200317T123530Z/dev is not a mount point. Skipping
17 Mar 2020 17:04:56 UTC: NOTICE : /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200317T123530Z/proc is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20200317T123530Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
3026.10user 889.55system 41:39.31elapsed 156%CPU (0avgtext+0avgdata 444540maxresident)k
157768inputs+2747560outputs (1major+139662053minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20200317T123530Z.Wna1wU/log/hardened_stage3.log
^ permalink raw reply [flat|nested] 24+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - hardened/stage3.spec
@ 2018-04-18 6:32 catalyst
0 siblings, 0 replies; 24+ messages in thread
From: catalyst @ 2018-04-18 6:32 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f hardened/stage3.spec
18 Apr 2018 06:31:36 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
18 Apr 2018 06:31:36 UTC: NOTICE : conf_values[options] = {'pkgcache', 'clear-autoresume', 'preserve_libs', 'bindist'}
18 Apr 2018 06:31:36 UTC: NOTICE : Processing spec file: hardened/stage3.spec
18 Apr 2018 06:31:36 UTC: NOTICE : Using target: stage3
18 Apr 2018 06:31:36 UTC: NOTICE : Source file specification matching setting is: loose
18 Apr 2018 06:31:36 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
18 Apr 2018 06:31:36 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/hardened/stage2-i686-hardened-20180418T030004Z.tar.xz
18 Apr 2018 06:31:36 UTC: NOTICE : --- Running action sequence: unpack
18 Apr 2018 06:31:36 UTC: NOTICE : Clearing the chroot path ...
18 Apr 2018 06:31:36 UTC: NOTICE : Emptying directory: /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20180418T030004Z
18 Apr 2018 06:31:36 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/hardened/stage2-i686-hardened-20180418T030004Z.tar.xz
18 Apr 2018 06:31:36 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20180418T030004Z (this may take some time) ..
18 Apr 2018 06:31:37 UTC: NOTICE : --- Running action sequence: unpack_snapshot
18 Apr 2018 06:31:37 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
18 Apr 2018 06:31:50 UTC: NOTICE : --- Running action sequence: setup_confdir
18 Apr 2018 06:31:50 UTC: NOTICE : --- Running action sequence: portage_overlay
18 Apr 2018 06:31:50 UTC: NOTICE : --- Running action sequence: base_dirs
18 Apr 2018 06:31:50 UTC: NOTICE : --- Running action sequence: bind
18 Apr 2018 06:31:50 UTC: NOTICE : --- Running action sequence: chroot_setup
18 Apr 2018 06:31:50 UTC: NOTICE : Setting up chroot...
18 Apr 2018 06:31:50 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
18 Apr 2018 06:31:50 UTC: WARNING : If your build fails look here first as the possible problem.
18 Apr 2018 06:31:50 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
18 Apr 2018 06:31:50 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
18 Apr 2018 06:31:50 UTC: WARNING : You have been warned.
18 Apr 2018 06:31:50 UTC: NOTICE : Writing the stage make.conf to: /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20180418T030004Z/etc/portage/make.conf
18 Apr 2018 06:31:50 UTC: NOTICE : STICKY-CONFIG is enabled
18 Apr 2018 06:31:50 UTC: NOTICE : --- Running action sequence: setup_environment
18 Apr 2018 06:31:50 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20180418T030004Z/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20180418T030004Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20180418T030004Z /tmp/stage3-chroot.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Emerging binary (1 of 2) dev-python/pyblake2-1.1.0::gentoo
>>> Installing (1 of 2) dev-python/pyblake2-1.1.0::gentoo
>>> Emerging binary (2 of 2) sys-apps/portage-2.3.24-r1::gentoo
>>> Installing (2 of 2) sys-apps/portage-2.3.24-r1::gentoo
emerge --quiet --usepkg --buildpkg --newuse -e --update --deep --with-bdeps=y @system
[nomerge ] sys-apps/elfix-0.9.2::gentoo USE="ptpax xtpax"
[nomerge ] dev-python/pypax-0.9.2::gentoo USE="ptpax xtpax" PYTHON_TARGETS="python2_7 python3_5 (-pypy) -python3_4 -python3_6"
[nomerge ] dev-python/setuptools-34.0.2-r1::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6"
[binary N ] dev-python/packaging-16.8::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6" 0 KiB
[ebuild N ] dev-python/six-1.11.0::gentoo USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6" 0 KiB
[binary N ] dev-python/setuptools-34.0.2-r1::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6" 0 KiB
Total: 3 packages (3 new, 2 binaries), Size of downloads: 0 KiB
* Error: circular dependencies:
(dev-python/setuptools-34.0.2-r1:0/0::gentoo, binary scheduled for merge) depends on
(dev-python/six-1.11.0:0/0::gentoo, ebuild scheduled for merge) (runtime)
(dev-python/setuptools-34.0.2-r1:0/0::gentoo, binary scheduled for merge) (buildtime)
* Note that circular dependencies can often be avoided by temporarily
* disabling USE flags that trigger optional dependencies.
18 Apr 2018 06:32:28 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
18 Apr 2018 06:32:28 UTC: ERROR : CatalystError: Stage build aborting due to error.
18 Apr 2018 06:32:28 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.5/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
18 Apr 2018 06:32:28 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
30.73user 3.91system 0:52.78elapsed 65%CPU (0avgtext+0avgdata 322336maxresident)k
8inputs+2175504outputs (0major+478871minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20180418T030004Z.tK6pR6/log/hardened_stage3.log
^ permalink raw reply [flat|nested] 24+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - hardened/stage3.spec
@ 2018-04-11 6:33 catalyst
0 siblings, 0 replies; 24+ messages in thread
From: catalyst @ 2018-04-11 6:33 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f hardened/stage3.spec
11 Apr 2018 06:32:48 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
11 Apr 2018 06:32:48 UTC: NOTICE : conf_values[options] = {'preserve_libs', 'bindist', 'pkgcache', 'clear-autoresume'}
11 Apr 2018 06:32:48 UTC: NOTICE : Processing spec file: hardened/stage3.spec
11 Apr 2018 06:32:48 UTC: NOTICE : Using target: stage3
11 Apr 2018 06:32:48 UTC: NOTICE : Source file specification matching setting is: loose
11 Apr 2018 06:32:48 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
11 Apr 2018 06:32:48 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/hardened/stage2-i686-hardened-20180411T030004Z.tar.xz
11 Apr 2018 06:32:48 UTC: NOTICE : --- Running action sequence: unpack
11 Apr 2018 06:32:48 UTC: NOTICE : Clearing the chroot path ...
11 Apr 2018 06:32:48 UTC: NOTICE : Emptying directory: /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20180411T030004Z
11 Apr 2018 06:32:48 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/hardened/stage2-i686-hardened-20180411T030004Z.tar.xz
11 Apr 2018 06:32:48 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20180411T030004Z (this may take some time) ..
11 Apr 2018 06:32:49 UTC: NOTICE : --- Running action sequence: unpack_snapshot
11 Apr 2018 06:32:49 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
11 Apr 2018 06:33:05 UTC: NOTICE : --- Running action sequence: setup_confdir
11 Apr 2018 06:33:05 UTC: NOTICE : --- Running action sequence: portage_overlay
11 Apr 2018 06:33:05 UTC: NOTICE : --- Running action sequence: base_dirs
11 Apr 2018 06:33:05 UTC: NOTICE : --- Running action sequence: bind
11 Apr 2018 06:33:05 UTC: NOTICE : --- Running action sequence: chroot_setup
11 Apr 2018 06:33:05 UTC: NOTICE : Setting up chroot...
11 Apr 2018 06:33:05 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
11 Apr 2018 06:33:05 UTC: WARNING : If your build fails look here first as the possible problem.
11 Apr 2018 06:33:05 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
11 Apr 2018 06:33:05 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
11 Apr 2018 06:33:05 UTC: WARNING : You have been warned.
11 Apr 2018 06:33:05 UTC: NOTICE : Writing the stage make.conf to: /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20180411T030004Z/etc/portage/make.conf
11 Apr 2018 06:33:05 UTC: NOTICE : STICKY-CONFIG is enabled
11 Apr 2018 06:33:05 UTC: NOTICE : --- Running action sequence: setup_environment
11 Apr 2018 06:33:05 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20180411T030004Z/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20180411T030004Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20180411T030004Z /tmp/stage3-chroot.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Emerging binary (1 of 2) dev-python/pyblake2-1.1.0::gentoo
>>> Installing (1 of 2) dev-python/pyblake2-1.1.0::gentoo
>>> Emerging binary (2 of 2) sys-apps/portage-2.3.24-r1::gentoo
>>> Installing (2 of 2) sys-apps/portage-2.3.24-r1::gentoo
emerge --quiet --usepkg --buildpkg --newuse -e --update --deep --with-bdeps=y @system
[nomerge ] sys-apps/elfix-0.9.2::gentoo USE="ptpax xtpax"
[nomerge ] dev-python/pypax-0.9.2::gentoo USE="ptpax xtpax" PYTHON_TARGETS="python2_7 python3_5 (-pypy) -python3_4 -python3_6"
[nomerge ] dev-python/setuptools-34.0.2-r1::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6"
[binary N ] dev-python/packaging-16.8::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6" 0 KiB
[ebuild N ] dev-python/six-1.11.0::gentoo USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6" 0 KiB
[binary N ] dev-python/setuptools-34.0.2-r1::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6" 0 KiB
Total: 3 packages (3 new, 2 binaries), Size of downloads: 0 KiB
* Error: circular dependencies:
(dev-python/setuptools-34.0.2-r1:0/0::gentoo, binary scheduled for merge) depends on
(dev-python/six-1.11.0:0/0::gentoo, ebuild scheduled for merge) (runtime)
(dev-python/setuptools-34.0.2-r1:0/0::gentoo, binary scheduled for merge) (buildtime)
* Note that circular dependencies can often be avoided by temporarily
* disabling USE flags that trigger optional dependencies.
11 Apr 2018 06:33:46 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
11 Apr 2018 06:33:46 UTC: ERROR : CatalystError: Stage build aborting due to error.
11 Apr 2018 06:33:46 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.5/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
11 Apr 2018 06:33:46 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
30.18user 3.94system 0:58.73elapsed 58%CPU (0avgtext+0avgdata 322176maxresident)k
16inputs+2177424outputs (0major+490668minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20180411T030004Z.Rp7uVw/log/hardened_stage3.log
^ permalink raw reply [flat|nested] 24+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - hardened/stage3.spec
@ 2018-04-04 6:33 catalyst
0 siblings, 0 replies; 24+ messages in thread
From: catalyst @ 2018-04-04 6:33 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f hardened/stage3.spec
04 Apr 2018 06:32:41 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
04 Apr 2018 06:32:41 UTC: NOTICE : conf_values[options] = {'bindist', 'pkgcache', 'preserve_libs', 'clear-autoresume'}
04 Apr 2018 06:32:41 UTC: NOTICE : Processing spec file: hardened/stage3.spec
04 Apr 2018 06:32:41 UTC: NOTICE : Using target: stage3
04 Apr 2018 06:32:41 UTC: NOTICE : Source file specification matching setting is: loose
04 Apr 2018 06:32:41 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
04 Apr 2018 06:32:42 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/hardened/stage2-i686-hardened-20180404T030003Z.tar.xz
04 Apr 2018 06:32:42 UTC: NOTICE : --- Running action sequence: unpack
04 Apr 2018 06:32:42 UTC: NOTICE : Clearing the chroot path ...
04 Apr 2018 06:32:42 UTC: NOTICE : Emptying directory: /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20180404T030003Z
04 Apr 2018 06:32:42 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/hardened/stage2-i686-hardened-20180404T030003Z.tar.xz
04 Apr 2018 06:32:42 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20180404T030003Z (this may take some time) ..
04 Apr 2018 06:32:43 UTC: NOTICE : --- Running action sequence: unpack_snapshot
04 Apr 2018 06:32:43 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
04 Apr 2018 06:32:59 UTC: NOTICE : --- Running action sequence: setup_confdir
04 Apr 2018 06:32:59 UTC: NOTICE : --- Running action sequence: portage_overlay
04 Apr 2018 06:32:59 UTC: NOTICE : --- Running action sequence: base_dirs
04 Apr 2018 06:32:59 UTC: NOTICE : --- Running action sequence: bind
04 Apr 2018 06:32:59 UTC: NOTICE : --- Running action sequence: chroot_setup
04 Apr 2018 06:32:59 UTC: NOTICE : Setting up chroot...
04 Apr 2018 06:32:59 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
04 Apr 2018 06:32:59 UTC: WARNING : If your build fails look here first as the possible problem.
04 Apr 2018 06:32:59 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
04 Apr 2018 06:32:59 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
04 Apr 2018 06:32:59 UTC: WARNING : You have been warned.
04 Apr 2018 06:32:59 UTC: NOTICE : Writing the stage make.conf to: /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20180404T030003Z/etc/portage/make.conf
04 Apr 2018 06:32:59 UTC: NOTICE : STICKY-CONFIG is enabled
04 Apr 2018 06:32:59 UTC: NOTICE : --- Running action sequence: setup_environment
04 Apr 2018 06:32:59 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20180404T030003Z/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20180404T030003Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20180404T030003Z /tmp/stage3-chroot.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Emerging binary (1 of 2) dev-python/pyblake2-1.1.0::gentoo
>>> Installing (1 of 2) dev-python/pyblake2-1.1.0::gentoo
>>> Emerging binary (2 of 2) sys-apps/portage-2.3.24-r1::gentoo
>>> Installing (2 of 2) sys-apps/portage-2.3.24-r1::gentoo
emerge --quiet --usepkg --buildpkg --newuse -e --update --deep --with-bdeps=y @system
[nomerge ] virtual/package-manager-1::gentoo
[nomerge ] sys-apps/portage-2.3.24-r1::gentoo USE="(ipc) native-extensions (xattr) -build -doc -epydoc -gentoo-dev -rsync-verify (-selinux)" PYTHON_TARGETS="python2_7 python3_5 -pypy -python3_4 -python3_6"
[nomerge ] dev-python/pyxattr-0.5.5::gentoo USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) -python3_4"
[nomerge ] dev-python/setuptools-34.0.2-r1::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6"
[binary N ] dev-python/packaging-16.8::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6" 0 KiB
[ebuild N ] dev-python/six-1.11.0::gentoo USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6" 0 KiB
[binary N ] dev-python/setuptools-34.0.2-r1::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_5 (-pypy) (-pypy3) -python3_4 -python3_6" 0 KiB
Total: 3 packages (3 new, 2 binaries), Size of downloads: 0 KiB
* Error: circular dependencies:
(dev-python/six-1.11.0:0/0::gentoo, ebuild scheduled for merge) depends on
(dev-python/setuptools-34.0.2-r1:0/0::gentoo, binary scheduled for merge) (buildtime)
(dev-python/six-1.11.0:0/0::gentoo, ebuild scheduled for merge) (runtime)
* Note that circular dependencies can often be avoided by temporarily
* disabling USE flags that trigger optional dependencies.
04 Apr 2018 06:33:31 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
04 Apr 2018 06:33:32 UTC: ERROR : CatalystError: Stage build aborting due to error.
04 Apr 2018 06:33:32 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.5/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
04 Apr 2018 06:33:32 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
30.62user 3.90system 0:50.42elapsed 68%CPU (0avgtext+0avgdata 322228maxresident)k
0inputs+2184760outputs (0major+487977minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20180404T030003Z.ufjahC/log/hardened_stage3.log
^ permalink raw reply [flat|nested] 24+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - hardened/stage3.spec
@ 2017-12-28 4:11 catalyst
0 siblings, 0 replies; 24+ messages in thread
From: catalyst @ 2017-12-28 4:11 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
28 Dec 2017 04:00:09 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
28 Dec 2017 04:00:09 UTC: NOTICE : conf_values[options] = {'autoresume', 'bindist', 'snapcache', 'clear-autoresume', 'preserve_libs', 'pkgcache', 'seedcache'}
28 Dec 2017 04:00:09 UTC: NOTICE : Processing spec file: hardened/stage3.spec
28 Dec 2017 04:00:09 UTC: NOTICE : Using target: stage3
28 Dec 2017 04:00:09 UTC: NOTICE : Source file specification matching setting is: loose
28 Dec 2017 04:00:09 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
28 Dec 2017 04:00:09 UTC: NOTICE : Source path set to /release/buildroot/x86-dev/tmp/hardened/stage2-i686-hardened-20171227T214502Z/
28 Dec 2017 04:00:09 UTC: NOTICE : Removing AutoResume Points ...
28 Dec 2017 04:00:09 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/hardened/.autoresume-stage3-i686-hardened-20171227T214502Z
28 Dec 2017 04:00:09 UTC: NOTICE : --- Running action sequence: unpack
28 Dec 2017 04:00:09 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
28 Dec 2017 04:00:09 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
28 Dec 2017 04:00:09 UTC: NOTICE : Removing AutoResume Points ...
28 Dec 2017 04:00:09 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/hardened/.autoresume-stage3-i686-hardened-20171227T214502Z
28 Dec 2017 04:00:09 UTC: NOTICE : Clearing the chroot path ...
28 Dec 2017 04:00:09 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20171227T214502Z
28 Dec 2017 04:00:09 UTC: NOTICE : Starting rsync from /release/buildroot/x86-dev/tmp/hardened/stage2-i686-hardened-20171227T214502Z/
28 Dec 2017 04:00:09 UTC: NOTICE : to /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20171227T214502Z (this may take some time) ..
28 Dec 2017 04:00:12 UTC: NOTICE : --- Running action sequence: unpack_snapshot
28 Dec 2017 04:00:12 UTC: NOTICE : --- Running action sequence: setup_confdir
28 Dec 2017 04:00:12 UTC: NOTICE : --- Running action sequence: portage_overlay
28 Dec 2017 04:00:12 UTC: NOTICE : --- Running action sequence: base_dirs
28 Dec 2017 04:00:12 UTC: NOTICE : --- Running action sequence: bind
28 Dec 2017 04:00:12 UTC: NOTICE : --- Running action sequence: chroot_setup
28 Dec 2017 04:00:12 UTC: NOTICE : Setting up chroot...
28 Dec 2017 04:00:12 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
28 Dec 2017 04:00:12 UTC: WARNING : If your build fails look here first as the possible problem.
28 Dec 2017 04:00:12 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
28 Dec 2017 04:00:12 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
28 Dec 2017 04:00:12 UTC: WARNING : You have been warned.
28 Dec 2017 04:00:12 UTC: NOTICE : Writing the stage make.conf to: /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20171227T214502Z/etc/portage/make.conf
28 Dec 2017 04:00:12 UTC: NOTICE : STICKY-CONFIG is enabled
28 Dec 2017 04:00:12 UTC: NOTICE : --- Running action sequence: setup_environment
28 Dec 2017 04:00:12 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20171227T214502Z/tmp
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20171227T214502Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
setarch linux32 chroot /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20171227T214502Z /tmp/stage3-chroot.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 10) app-misc/mime-types-9::gentoo
>>> Installing (1 of 10) app-misc/mime-types-9::gentoo
>>> Emerging (2 of 10) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (2 of 10) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging (3 of 10) sys-apps/debianutils-4.7::gentoo
>>> Emerging (4 of 10) sys-libs/gdbm-1.11::gentoo
>>> Installing (3 of 10) sys-apps/debianutils-4.7::gentoo
>>> Installing (4 of 10) sys-libs/gdbm-1.11::gentoo
>>> Emerging (5 of 10) dev-libs/openssl-1.0.2n::gentoo
>>> Installing (5 of 10) dev-libs/openssl-1.0.2n::gentoo
>>> Emerging (6 of 10) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Installing (6 of 10) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Emerging (7 of 10) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (7 of 10) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (8 of 10) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (8 of 10) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (9 of 10) dev-python/pyblake2-0.9.3-r1::gentoo
>>> Installing (9 of 10) dev-python/pyblake2-0.9.3-r1::gentoo
>>> Emerging (10 of 10) sys-apps/portage-2.3.13-r1::gentoo
>>> Installing (10 of 10) sys-apps/portage-2.3.13-r1::gentoo
* Messages for package app-misc/ca-certificates-20161130.3.30.2:
* You should run update-ca-certificates manually after etc-update
* To prevent applications relying on system's trusted root certificate store
* from using CAs where at least one major browser vendor Gentoo is following
* has decided to apply trust level restrictions, the following
* certificate(s) were removed:
* mozilla/WoSign.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/CA_WoSign_ECC_Root.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign_China.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/Certification_Authority_of_WoSign_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_2.crt removed; see https://bugs.gentoo.org/598072 for details
* Messages for package dev-python/pyblake2-0.9.3-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-apps/portage-2.3.13-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
emerge --quiet --usepkg --buildpkg --newuse -e --update --deep --with-bdeps=y @system
[nomerge ] virtual/man-0-r1::gentoo
[nomerge ] sys-apps/man-db-2.7.6.1-r2::gentoo USE="berkdb gdbm manpager nls zlib (-selinux) -static-libs"
[nomerge ] dev-libs/libpipeline-1.4.0::gentoo USE="-static-libs {-test}"
[nomerge ] virtual/pkgconfig-0-r1::gentoo
[nomerge ] dev-util/pkgconfig-0.29.2::gentoo USE="hardened -internal-glib*"
[nomerge ] dev-libs/glib-2.50.3-r1:2::gentoo USE="mime xattr -dbus -debug (-fam) (-selinux) -static-libs -systemtap {-test} -utils" PYTHON_TARGETS="python2_7"
[ebuild N ] x11-misc/shared-mime-info-1.8::gentoo USE="{-test}" 0 KiB
[ebuild R ] dev-util/pkgconfig-0.29.2::gentoo USE="hardened -internal-glib*" 0 KiB
[ebuild N ] dev-libs/glib-2.50.3-r1:2::gentoo USE="mime xattr -dbus -debug (-fam) (-selinux) -static-libs -systemtap {-test} -utils" PYTHON_TARGETS="python2_7" 0 KiB
[ebuild N ] virtual/service-manager-0::gentoo USE="(-prefix)" 0 KiB
[nomerge ] sys-apps/openrc-0.34.11::gentoo USE="ncurses netifrc pam unicode -audit -debug -newnet (-prefix) (-selinux) -static-libs"
[ebuild N ] net-misc/netifrc-0.5.1::gentoo 0 KiB
[ebuild N ] sys-apps/openrc-0.34.11::gentoo USE="ncurses netifrc pam unicode -audit -debug -newnet (-prefix) (-selinux) -static-libs" 0 KiB
[ebuild N ] virtual/dev-manager-0::gentoo 0 KiB
[nomerge ] virtual/udev-217::gentoo USE="-systemd"
[ebuild N ] sys-fs/eudev-3.1.5::gentoo USE="hwdb kmod -introspection -rule-generator (-selinux) -static-libs {-test}" 0 KiB
[ebuild N ] sys-apps/hwids-20170328::gentoo USE="net pci udev usb" 0 KiB
[ebuild N ] sys-fs/udev-init-scripts-32::gentoo 0 KiB
[ebuild N ] virtual/udev-217::gentoo USE="-systemd" 0 KiB
[ebuild N ] virtual/ssh-0::gentoo USE="-minimal" 0 KiB
[ebuild N ] net-misc/openssh-7.5_p1-r3::gentoo USE="bindist hpn pam (pie) ssl -X -X509 -audit -debug -kerberos -ldap -ldns -libedit -libressl -livecd -sctp (-selinux) -skey -ssh1 -static {-test}" 0 KiB
[nomerge ] virtual/shadow-0::gentoo
[ebuild R ] sys-apps/shadow-4.5::gentoo USE="acl* nls* pam* xattr* -audit -cracklib (-selinux) -skey" LINGUAS="-cs -da -de -es -fi -fr -hu -id -it -ja -ko -pl -pt_BR -ru -sv -tr -zh_CN -zh_TW" 0 KiB
[nomerge ] sys-apps/kbd-2.0.3::gentoo USE="nls pam {-test}"
[nomerge ] virtual/pam-0-r1::gentoo
[ebuild N ] sys-libs/pam-1.2.1-r2::gentoo USE="berkdb filecaps nls (pie) -audit -cracklib -debug -nis (-selinux) {-test}" 0 KiB
[ebuild N ] sys-auth/pambase-20150213-r1::gentoo USE="nullok sha512 -consolekit -cracklib -debug (-elogind) -gnome-keyring -minimal -mktemp -pam_krb5 -pam_ssh -passwdqc -securetty (-selinux) -systemd" 0 KiB
[ebuild N ] sys-apps/man-pages-4.09::gentoo USE="nls" L10N="-da -de -fr -it -ja -nl -pl -ro -ru -zh-CN" 0 KiB
[ebuild N ] sys-apps/man-pages-posix-2013a::gentoo 0 KiB
[ebuild N ] virtual/man-0-r1::gentoo 0 KiB
[ebuild N ] sys-apps/man-db-2.7.6.1-r2::gentoo USE="berkdb gdbm manpager nls zlib (-selinux) -static-libs" 0 KiB
[ebuild N ] app-text/po4a-0.47-r1::gentoo USE="{-test}" LINGUAS="-af -ca -cs -da -de -eo -es -et -eu -fr -hr -id -it -ja -kn -ko -nb -nl -pl -pt -pt_BR -ru -sl -sv -uk -vi -zh_CN -zh_HK" 0 KiB
[ebuild N ] app-text/docbook-xml-dtd-4.1.2-r6:4.1.2::gentoo 0 KiB
[ebuild N ] app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo USE="-ruby" 0 KiB
[ebuild N ] app-text/build-docbook-catalog-1.19.1::gentoo 0 KiB
[ebuild N ] sys-fs/e2fsprogs-1.43.6::gentoo USE="nls -fuse -static-libs" 0 KiB
[ebuild N ] sys-apps/util-linux-2.30.2::gentoo USE="cramfs ncurses nls pam readline suid unicode -build -caps -fdformat -kill -python (-selinux) -slang -static-libs -systemd {-test} -tty-helpers -udev" PYTHON_SINGLE_TARGET="python3_5 -python2_7 -python3_4 -python3_6" PYTHON_TARGETS="python2_7 python3_5 -python3_4 -python3_6" 0 KiB
[nomerge ] sys-apps/util-linux-2.30.2::gentoo USE="cramfs ncurses nls pam readline suid unicode -build -caps -fdformat -kill -python (-selinux) -slang -static-libs -systemd {-test} -tty-helpers -udev" PYTHON_SINGLE_TARGET="python3_5 -python2_7 -python3_4 -python3_6" PYTHON_TARGETS="python2_7 python3_5 -python3_4 -python3_6"
[nomerge ] sys-libs/pam-1.2.1-r2::gentoo USE="berkdb filecaps nls (pie) -audit -cracklib -debug -nis (-selinux) {-test}"
[ebuild N ] sys-libs/libcap-2.24-r2::gentoo USE="pam -static-libs" 0 KiB
[ebuild N ] sys-apps/kbd-2.0.3::gentoo USE="nls pam {-test}" 0 KiB
[ebuild N ] virtual/pam-0-r1::gentoo 0 KiB
Total: 29 packages (27 new, 2 reinstalls), Size of downloads: 0 KiB
* Error: circular dependencies:
(sys-libs/libcap-2.24-r2:0/0::gentoo, ebuild scheduled for merge) depends on
(virtual/pam-0-r1:0/0::gentoo, ebuild scheduled for merge) (buildtime)
(sys-libs/pam-1.2.1-r2:0/0::gentoo, ebuild scheduled for merge) (runtime)
(sys-libs/libcap-2.24-r2:0/0::gentoo, ebuild scheduled for merge) (buildtime)
It might be possible to break this cycle
by applying any of the following changes:
- sys-libs/pam-1.2.1-r2 (Change USE: -filecaps)
- sys-libs/libcap-2.24-r2 (Change USE: -pam)
Note that this change can be reverted, once the package has been installed.
28 Dec 2017 04:11:34 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
28 Dec 2017 04:11:34 UTC: ERROR : CatalystError: Stage build aborting due to error.
28 Dec 2017 04:11:34 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1350, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1450, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1359, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
28 Dec 2017 04:11:34 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
745.09user 145.86system 11:25.99elapsed 129%CPU (0avgtext+0avgdata 788848maxresident)k
1136inputs+2863608outputs (0major+40173802minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20171227T214502Z.zS8C2F/log/hardened_stage3.log
^ permalink raw reply [flat|nested] 24+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - hardened/stage3.spec
@ 2017-12-27 11:15 catalyst
0 siblings, 0 replies; 24+ messages in thread
From: catalyst @ 2017-12-27 11:15 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
27 Dec 2017 11:05:42 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
27 Dec 2017 11:05:42 UTC: NOTICE : Processing spec file: hardened/stage3.spec
27 Dec 2017 11:05:42 UTC: NOTICE : Using target: stage3
27 Dec 2017 11:05:43 UTC: NOTICE : Source file specification matching setting is: loose
27 Dec 2017 11:05:43 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
27 Dec 2017 11:05:43 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/hardened/stage2-i686-hardened-20171227T030001Z.tar.xz
27 Dec 2017 11:05:43 UTC: NOTICE : --- Running action sequence: unpack
27 Dec 2017 11:05:43 UTC: NOTICE : Clearing the chroot path ...
27 Dec 2017 11:05:43 UTC: NOTICE : Emptying directory: /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20171227T030001Z
27 Dec 2017 11:05:43 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/hardened/stage2-i686-hardened-20171227T030001Z.tar.xz
27 Dec 2017 11:05:43 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20171227T030001Z (this may take some time) ..
27 Dec 2017 11:05:45 UTC: NOTICE : --- Running action sequence: unpack_snapshot
27 Dec 2017 11:05:45 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
27 Dec 2017 11:05:57 UTC: NOTICE : --- Running action sequence: setup_confdir
27 Dec 2017 11:05:57 UTC: NOTICE : --- Running action sequence: portage_overlay
27 Dec 2017 11:05:57 UTC: NOTICE : --- Running action sequence: base_dirs
27 Dec 2017 11:05:57 UTC: NOTICE : --- Running action sequence: bind
27 Dec 2017 11:05:57 UTC: NOTICE : --- Running action sequence: chroot_setup
27 Dec 2017 11:05:57 UTC: NOTICE : Setting up chroot...
27 Dec 2017 11:05:57 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
27 Dec 2017 11:05:57 UTC: WARNING : If your build fails look here first as the possible problem.
27 Dec 2017 11:05:57 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
27 Dec 2017 11:05:57 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
27 Dec 2017 11:05:57 UTC: WARNING : You have been warned.
27 Dec 2017 11:05:57 UTC: NOTICE : Writing the stage make.conf to: /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20171227T030001Z/etc/portage/make.conf
27 Dec 2017 11:05:57 UTC: NOTICE : STICKY-CONFIG is enabled
27 Dec 2017 11:05:57 UTC: NOTICE : --- Running action sequence: setup_environment
27 Dec 2017 11:05:57 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20171227T030001Z/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20171227T030001Z/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20171227T030001Z /tmp/stage3-chroot.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 10) app-misc/mime-types-9::gentoo
>>> Installing (1 of 10) app-misc/mime-types-9::gentoo
>>> Emerging (2 of 10) app-misc/c_rehash-1.7-r1::gentoo
>>> Installing (2 of 10) app-misc/c_rehash-1.7-r1::gentoo
>>> Emerging (3 of 10) sys-apps/debianutils-4.7::gentoo
>>> Installing (3 of 10) sys-apps/debianutils-4.7::gentoo
>>> Emerging (4 of 10) sys-libs/gdbm-1.11::gentoo
>>> Installing (4 of 10) sys-libs/gdbm-1.11::gentoo
>>> Emerging (5 of 10) dev-libs/openssl-1.0.2n::gentoo
>>> Installing (5 of 10) dev-libs/openssl-1.0.2n::gentoo
>>> Emerging (6 of 10) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Installing (6 of 10) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Emerging (7 of 10) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (7 of 10) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (8 of 10) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (8 of 10) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (9 of 10) dev-python/pyblake2-0.9.3-r1::gentoo
>>> Installing (9 of 10) dev-python/pyblake2-0.9.3-r1::gentoo
>>> Emerging (10 of 10) sys-apps/portage-2.3.13-r1::gentoo
>>> Installing (10 of 10) sys-apps/portage-2.3.13-r1::gentoo
* Messages for package app-misc/ca-certificates-20161130.3.30.2:
* You should run update-ca-certificates manually after etc-update
* To prevent applications relying on system's trusted root certificate store
* from using CAs where at least one major browser vendor Gentoo is following
* has decided to apply trust level restrictions, the following
* certificate(s) were removed:
* mozilla/StartCom_Certification_Authority.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign_China.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/Certification_Authority_of_WoSign_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/CA_WoSign_ECC_Root.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign.crt removed; see https://bugs.gentoo.org/598072 for details
* Messages for package dev-python/pyblake2-0.9.3-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-apps/portage-2.3.13-r1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
emerge --quiet --usepkg --buildpkg --newuse -e --update --deep --with-bdeps=y @system
[nomerge ] virtual/man-0-r1::gentoo
[nomerge ] sys-apps/man-db-2.7.6.1-r2::gentoo USE="berkdb gdbm manpager nls zlib (-selinux) -static-libs"
[nomerge ] virtual/pkgconfig-0-r1::gentoo
[nomerge ] dev-util/pkgconfig-0.29.2::gentoo USE="hardened -internal-glib*"
[nomerge ] dev-libs/glib-2.50.3-r1:2::gentoo USE="mime xattr -dbus -debug (-fam) (-selinux) -static-libs -systemtap {-test} -utils" PYTHON_TARGETS="python2_7"
[ebuild N ] x11-misc/shared-mime-info-1.8::gentoo USE="{-test}" 0 KiB
[ebuild R ] dev-util/pkgconfig-0.29.2::gentoo USE="hardened -internal-glib*" 0 KiB
[ebuild N ] dev-libs/glib-2.50.3-r1:2::gentoo USE="mime xattr -dbus -debug (-fam) (-selinux) -static-libs -systemtap {-test} -utils" PYTHON_TARGETS="python2_7" 0 KiB
[ebuild N ] virtual/service-manager-0::gentoo USE="(-prefix)" 0 KiB
[nomerge ] sys-apps/openrc-0.34.11::gentoo USE="ncurses netifrc pam unicode -audit -debug -newnet (-prefix) (-selinux) -static-libs"
[ebuild N ] net-misc/netifrc-0.5.1::gentoo 0 KiB
[ebuild N ] sys-apps/openrc-0.34.11::gentoo USE="ncurses netifrc pam unicode -audit -debug -newnet (-prefix) (-selinux) -static-libs" 0 KiB
[ebuild N ] virtual/dev-manager-0::gentoo 0 KiB
[nomerge ] sys-fs/udev-init-scripts-32::gentoo
[nomerge ] virtual/udev-217::gentoo USE="-systemd"
[ebuild N ] sys-fs/eudev-3.1.5::gentoo USE="hwdb kmod -introspection -rule-generator (-selinux) -static-libs {-test}" 0 KiB
[ebuild N ] sys-apps/hwids-20170328::gentoo USE="net pci udev usb" 0 KiB
[ebuild N ] sys-fs/udev-init-scripts-32::gentoo 0 KiB
[ebuild N ] virtual/udev-217::gentoo USE="-systemd" 0 KiB
[ebuild N ] virtual/ssh-0::gentoo USE="-minimal" 0 KiB
[ebuild N ] net-misc/openssh-7.5_p1-r3::gentoo USE="bindist hpn pam (pie) ssl -X -X509 -audit -debug -kerberos -ldap -ldns -libedit -libressl -livecd -sctp (-selinux) -skey -ssh1 -static {-test}" 0 KiB
[nomerge ] virtual/shadow-0::gentoo
[ebuild R ] sys-apps/shadow-4.5::gentoo USE="acl* nls* pam* xattr* -audit -cracklib (-selinux) -skey" LINGUAS="-cs -da -de -es -fi -fr -hu -id -it -ja -ko -pl -pt_BR -ru -sv -tr -zh_CN -zh_TW" 0 KiB
[nomerge ] sys-apps/openrc-0.34.11::gentoo USE="ncurses netifrc pam unicode -audit -debug -newnet (-prefix) (-selinux) -static-libs"
[nomerge ] virtual/pam-0-r1::gentoo
[ebuild N ] sys-libs/pam-1.2.1-r2::gentoo USE="berkdb filecaps nls (pie) -audit -cracklib -debug -nis (-selinux) {-test}" 0 KiB
[ebuild N ] sys-auth/pambase-20150213-r1::gentoo USE="nullok sha512 -consolekit -cracklib -debug (-elogind) -gnome-keyring -minimal -mktemp -pam_krb5 -pam_ssh -passwdqc -securetty (-selinux) -systemd" 0 KiB
[ebuild N ] sys-apps/man-pages-4.09::gentoo USE="nls" L10N="-da -de -fr -it -ja -nl -pl -ro -ru -zh-CN" 0 KiB
[ebuild N ] sys-apps/man-pages-posix-2013a::gentoo 0 KiB
[ebuild N ] virtual/man-0-r1::gentoo 0 KiB
[ebuild N ] sys-apps/man-db-2.7.6.1-r2::gentoo USE="berkdb gdbm manpager nls zlib (-selinux) -static-libs" 0 KiB
[ebuild N ] app-text/po4a-0.47-r1::gentoo USE="{-test}" LINGUAS="-af -ca -cs -da -de -eo -es -et -eu -fr -hr -id -it -ja -kn -ko -nb -nl -pl -pt -pt_BR -ru -sl -sv -uk -vi -zh_CN -zh_HK" 0 KiB
[ebuild N ] app-text/docbook-xml-dtd-4.1.2-r6:4.1.2::gentoo 0 KiB
[ebuild N ] app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo USE="-ruby" 0 KiB
[ebuild N ] app-text/build-docbook-catalog-1.19.1::gentoo 0 KiB
[ebuild N ] sys-fs/e2fsprogs-1.43.6::gentoo USE="nls -fuse -static-libs" 0 KiB
[ebuild N ] sys-apps/util-linux-2.30.2::gentoo USE="cramfs ncurses nls pam readline suid unicode -build -caps -fdformat -kill -python (-selinux) -slang -static-libs -systemd {-test} -tty-helpers -udev" PYTHON_SINGLE_TARGET="python3_5 -python2_7 -python3_4 -python3_6" PYTHON_TARGETS="python2_7 python3_5 -python3_4 -python3_6" 0 KiB
[nomerge ] sys-apps/util-linux-2.30.2::gentoo USE="cramfs ncurses nls pam readline suid unicode -build -caps -fdformat -kill -python (-selinux) -slang -static-libs -systemd {-test} -tty-helpers -udev" PYTHON_SINGLE_TARGET="python3_5 -python2_7 -python3_4 -python3_6" PYTHON_TARGETS="python2_7 python3_5 -python3_4 -python3_6"
[nomerge ] sys-libs/pam-1.2.1-r2::gentoo USE="berkdb filecaps nls (pie) -audit -cracklib -debug -nis (-selinux) {-test}"
[ebuild N ] sys-libs/libcap-2.24-r2::gentoo USE="pam -static-libs" 0 KiB
[ebuild N ] sys-apps/kbd-2.0.3::gentoo USE="nls pam {-test}" 0 KiB
[ebuild N ] virtual/pam-0-r1::gentoo 0 KiB
Total: 29 packages (27 new, 2 reinstalls), Size of downloads: 0 KiB
* Error: circular dependencies:
(sys-libs/pam-1.2.1-r2:0/0::gentoo, ebuild scheduled for merge) depends on
(sys-libs/libcap-2.24-r2:0/0::gentoo, ebuild scheduled for merge) (buildtime)
(virtual/pam-0-r1:0/0::gentoo, ebuild scheduled for merge) (buildtime)
(sys-libs/pam-1.2.1-r2:0/0::gentoo, ebuild scheduled for merge) (runtime)
It might be possible to break this cycle
by applying any of the following changes:
- sys-libs/pam-1.2.1-r2 (Change USE: -filecaps)
- sys-libs/libcap-2.24-r2 (Change USE: -pam)
Note that this change can be reverted, once the package has been installed.
27 Dec 2017 11:15:25 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage3/stage3-controller.sh', 'run']) exited 1
27 Dec 2017 11:15:25 UTC: ERROR : CatalystError: Stage build aborting due to error.
27 Dec 2017 11:15:25 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1437, in run
getattr(self, x)()
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1346, in run_local
print_traceback=False)
CatalystError
27 Dec 2017 11:15:25 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
503.34user 107.36system 9:43.01elapsed 104%CPU (0avgtext+0avgdata 323156maxresident)k
1264inputs+4121064outputs (0major+40158334minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20171227T030001Z.8P6Vha/log/hardened_stage3.log
^ permalink raw reply [flat|nested] 24+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - hardened/stage3.spec
@ 2015-11-25 11:11 catalyst
0 siblings, 0 replies; 24+ messages in thread
From: catalyst @ 2015-11-25 11:11 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
25 Nov 2015 11:02:26 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
25 Nov 2015 11:02:26 UTC: NOTICE : Using target: stage3
25 Nov 2015 11:02:26 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/hardened/stage2-i686-hardened-20151125.tar.xz
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
25 Nov 2015 11:02:36 UTC: NOTICE : purge(); clearing autoresume ...
25 Nov 2015 11:02:36 UTC: NOTICE : purge(); clearing chroot ...
25 Nov 2015 11:02:36 UTC: NOTICE : Clearing the chroot path ...
25 Nov 2015 11:02:36 UTC: NOTICE : purge(); clearing package cache ...
25 Nov 2015 11:02:36 UTC: NOTICE : purging the pkgcache ...
25 Nov 2015 11:02:36 UTC: NOTICE : purge(); clearing kerncache ...
25 Nov 2015 11:02:36 UTC: NOTICE : --- Running action sequence: unpack
25 Nov 2015 11:02:36 UTC: NOTICE : Clearing the chroot path ...
25 Nov 2015 11:02:36 UTC: NOTICE : Starting None from /home/release/buildroot/x86-dev/builds/hardened/stage2-i686-hardened-20151125.tar.xz
25 Nov 2015 11:02:36 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20151125 (this may take some time) ..
25 Nov 2015 11:02:38 UTC: NOTICE : --- Running action sequence: unpack_snapshot
25 Nov 2015 11:02:38 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
25 Nov 2015 11:02:53 UTC: NOTICE : --- Running action sequence: setup_confdir
25 Nov 2015 11:02:53 UTC: NOTICE : --- Running action sequence: portage_overlay
25 Nov 2015 11:02:53 UTC: NOTICE : --- Running action sequence: base_dirs
25 Nov 2015 11:02:53 UTC: NOTICE : --- Running action sequence: bind
25 Nov 2015 11:02:53 UTC: NOTICE : --- Running action sequence: chroot_setup
25 Nov 2015 11:02:53 UTC: NOTICE : Setting up chroot...
25 Nov 2015 11:02:53 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
25 Nov 2015 11:02:53 UTC: WARNING : If your build fails look here first as the possible problem.
25 Nov 2015 11:02:53 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
25 Nov 2015 11:02:53 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
25 Nov 2015 11:02:53 UTC: WARNING : You have been warned.
25 Nov 2015 11:02:53 UTC: NOTICE : --- Running action sequence: setup_environment
25 Nov 2015 11:02:53 UTC: NOTICE : --- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20151125/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20151125/tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20151125 /tmp/stage3-chroot.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 8) sys-libs/gdbm-1.11::gentoo
>>> Installing (1 of 8) sys-libs/gdbm-1.11::gentoo
>>> Emerging (2 of 8) app-misc/mime-types-9::gentoo
>>> Installing (2 of 8) app-misc/mime-types-9::gentoo
>>> Emerging (3 of 8) sys-apps/debianutils-4.4::gentoo
>>> Installing (3 of 8) sys-apps/debianutils-4.4::gentoo
>>> Emerging (4 of 8) dev-libs/openssl-1.0.2d::gentoo
>>> Installing (4 of 8) dev-libs/openssl-1.0.2d::gentoo
>>> Emerging (5 of 8) app-misc/ca-certificates-20140927.3.17.2::gentoo
>>> Installing (5 of 8) app-misc/ca-certificates-20140927.3.17.2::gentoo
>>> Emerging (6 of 8) dev-lang/python-2.7.10-r1::gentoo
>>> Installing (6 of 8) dev-lang/python-2.7.10-r1::gentoo
>>> Emerging (7 of 8) dev-lang/python-3.4.3::gentoo
>>> Installing (7 of 8) dev-lang/python-3.4.3::gentoo
>>> Emerging (8 of 8) sys-apps/portage-2.2.20.1::gentoo
>>> Installing (8 of 8) sys-apps/portage-2.2.20.1::gentoo
* Messages for package app-misc/ca-certificates-20140927.3.17.2:
* You should run update-ca-certificates manually after etc-update
* Messages for package sys-apps/portage-2.2.20.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
emerge --quiet --usepkg --buildpkg --newuse -e @system
[nomerge ] virtual/man-0-r1::gentoo
[nomerge ] sys-apps/man-db-2.7.2::gentoo USE="berkdb gdbm nls zlib (-selinux) -static-libs"
[nomerge ] virtual/pkgconfig-0-r1::gentoo
[nomerge ] dev-util/pkgconfig-0.28-r2::gentoo USE="hardened -internal-glib*"
[nomerge ] dev-libs/glib-2.44.1-r1:2::gentoo USE="mime xattr -dbus -debug (-fam) (-selinux) -static-libs -systemtap {-test} -utils" PYTHON_TARGETS="python2_7"
[ebuild N ] dev-util/desktop-file-utils-0.22::gentoo USE="-emacs" 0 KiB
[ebuild N ] x11-misc/shared-mime-info-1.4::gentoo USE="{-test}" 0 KiB
[ebuild R ] dev-util/pkgconfig-0.28-r2::gentoo USE="hardened -internal-glib*" 0 KiB
[ebuild N ] dev-libs/glib-2.44.1-r1:2::gentoo USE="mime xattr -dbus -debug (-fam) (-selinux) -static-libs -systemtap {-test} -utils" PYTHON_TARGETS="python2_7" 0 KiB
Total: 4 packages (3 new, 1 reinstall), Size of downloads: 0 KiB
* Error: circular dependencies:
(dev-libs/glib-2.44.1-r1:2/2::gentoo, ebuild scheduled for merge) depends on
(dev-util/desktop-file-utils-0.22:0/0::gentoo, ebuild scheduled for merge) (buildtime)
(dev-libs/glib-2.44.1-r1:2/2::gentoo, ebuild scheduled for merge) (buildtime)
* Note that circular dependencies can often be avoided by temporarily
* disabling USE flags that trigger optional dependencies.
25 Nov 2015 11:11:22 UTC: ERROR : CatalystError: cmd() NON-zero return value from: run script failed.
25 Nov 2015 11:11:22 UTC: ERROR : CatalystError: Stage build aborting due to error.
25 Nov 2015 11:11:22 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1397, in run
getattr(self, x)()
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1309, in run_local
print_traceback=False)
CatalystError
25 Nov 2015 11:11:22 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /home/release/tmp/run/catalyst-auto.XKqkF7/log/hardened_stage3.log
^ permalink raw reply [flat|nested] 24+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - hardened/stage3.spec
@ 2015-06-24 10:51 catalyst
0 siblings, 0 replies; 24+ messages in thread
From: catalyst @ 2015-06-24 10:51 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
ltf="/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/ada/gcc-interface/ada-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/cp/cp-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/java/java-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/objc/objc-tree.def"; for f in $ltf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/||' >> tmp-all-tree.def
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-all-tree.def all-tree.def
echo timestamp > s-alltree
if test no = yes \
|| test -n "m64=../lib64 m32=../lib mx32=../libx32"; then \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/genmultilib \
"m64/m32" \
" 64 32" \
"" \
"" \
"" \
"" \
"m64=../lib64 m32=../lib mx32=../libx32" \
"" \
"" \
"" \
"no" \
> tmp-mlib.h; \
else \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/genmultilib '' '' '' '' '' '' '' '' \
"" '' no \
> tmp-mlib.h; \
fi
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-mlib.h multilib.h
echo timestamp > s-mlib
lsf="/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/cp/lang-specs.h /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/lto/lang-specs.h"; for f in $lsf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/||' > tmp-specs.h
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-specs.h specs.h
echo timestamp > s-specs
echo "/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/ -B/usr/i686-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/i686-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -DEFAULT_PIE_SSP -fno-PIE -O2 -march=i686 -pipe -gtoggle -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narr
owing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -static-libstdc++ -static-libgcc " > checksum-options.tmp \
&& /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change checksum-options.tmp checksum-options
gawk -f /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386-builtin-types.awk /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386-builtin-types.def > tmp-bt.inc
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-bt.inc i386-builtin-types.inc
echo timestamp > s-i386-bt
cp /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gcc-ar.c gcc-nm.c
cp /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gcc-ar.c gcc-ranlib.c
/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/ -B/usr/i686-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/i686-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -c -DEFAULT_PIE_SSP -fno-PIE -DHOST_GENERATOR_FILE -O2 -march=i686 -pipe -gtoggle -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables
-W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c -o gengtype.o
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:0:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:500:34: error: declaration of C function 'const char* strsignal(int)' conflicts with
extern const char *strsignal (int);
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/cstring:42:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:205,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/usr/include/string.h:563:14: error: previous declaration 'char* strsignal(int)' here
extern char *strsignal (int __sig) __THROW;
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:645:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include/libiberty.h:110:36: error: new declaration 'char* basename(const char*)'
extern char *basename (const char *);
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/cstring:42:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:205,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/usr/include/string.h:600:26: error: ambiguates old declaration 'const char* basename(const char*)'
extern "C++" const char *basename (const char *__filename)
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:0:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:289:56: error: 'CHAR_BIT' was not declared in this scope
? ~ (t) 0 << (sizeof(t) * CHAR_BIT - 1) : (t) 0))
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:290:44: note: in expansion of macro 'INTTYPE_MINIMUM'
#define INTTYPE_MAXIMUM(t) ((t) (~ (t) 0 - INTTYPE_MINIMUM (t)))
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:294:20: note: in expansion of macro 'INTTYPE_MAXIMUM'
# define UCHAR_MAX INTTYPE_MAXIMUM (unsigned char)
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.h:455:23: note: in expansion of macro 'UCHAR_MAX'
CHAR_TOKEN_OFFSET = UCHAR_MAX + 1,
^
Makefile:1070: recipe for target 'gengtype.o' failed
make[3]: *** [gengtype.o] Error 1
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/gcc'
Makefile:4193: recipe for target 'all-stage2-gcc' failed
make[2]: *** [all-stage2-gcc] Error 2
make[2]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
Makefile:17046: recipe for target 'stage2-bubble' failed
make[1]: *** [stage2-bubble] Error 2
make[1]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
Makefile:17252: recipe for target 'bootstrap-lean' failed
make: *** [bootstrap-lean] Error 2
* ERROR: sys-devel/gcc-4.8.4::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.4::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-build-logs.tar.bz2 in your bug report.
*
* Messages for package sys-libs/timezone-data-2015b:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-apps/baselayout-2.2:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package sys-apps/sysvinit-2.88-r7:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package dev-python/setuptools-12.0.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyxattr-0.5.3:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-libs/glibc-2.20-r2:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package dev-perl/Module-Build-0.420.500:
* This package will overwrite one or more files that may belong to other
* packages (see list below).
*
* Detected file collision(s):
*
* /usr/bin/config_data
* /usr/share/man/man1/config_data.1.bz2
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'dev-perl/Module-Build-0.420.500' merged despite file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
* Messages for package sys-apps/coreutils-8.21:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/less-458:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package sys-devel/gcc-4.8.4:
* ERROR: sys-devel/gcc-4.8.4::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.4::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-build-logs.tar.bz2 in your bug report.
*
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1253, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1333, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1258, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20150624/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.r2V17E/log/hardened_stage3.log
^ permalink raw reply [flat|nested] 24+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - hardened/stage3.spec
@ 2015-03-18 11:03 catalyst
0 siblings, 0 replies; 24+ messages in thread
From: catalyst @ 2015-03-18 11:03 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
configure: creating ./config.status
config.status: creating as
config.status: creating collect-ld
config.status: creating nm
config.status: creating Makefile
config.status: creating ada/gcc-interface/Makefile
config.status: creating ada/Makefile
config.status: creating auto-host.h
config.status: executing default commands
make[3]: Entering directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/libcpp'
i686-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o charset.o -MT charset.o -MMD -MP -MF .deps/charset.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/charset.c
i686-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o lex.o -MT lex.o -MMD -MP -MF .deps/lex.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/lex.c
i686-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o line-map.o -MT line-map.o -MMD -MP -MF .deps/line-map.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/line-map.c
i686-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o macro.o -MT macro.o -MMD -MP -MF .deps/macro.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/macro.c
i686-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o mkdeps.o -MT mkdeps.o -MMD -MP -MF .deps/mkdeps.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/mkdeps.c
i686-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o pch.o -MT pch.o -MMD -MP -MF .deps/pch.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/pch.c
i686-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o symtab.o -MT symtab.o -MMD -MP -MF .deps/symtab.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/symtab.c
i686-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o traditional.o -MT traditional.o -MMD -MP -MF .deps/traditional.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/traditional.c
echo "#define LOCALEDIR \"/usr/share/gcc-data/i686-pc-linux-gnu/4.8.3/locale\"" > localedir.new
/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../move-if-change localedir.new localedir.h
echo timestamp > localedir.hs
i686-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o identifiers.o -MT identifiers.o -MMD -MP -MF .deps/identifiers.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/identifiers.c
i686-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o files.o -MT files.o -MMD -MP -MF .deps/files.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/files.c
i686-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o init.o -MT init.o -MMD -MP -MF .deps/init.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/init.c
i686-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o expr.o -MT expr.o -MMD -MP -MF .deps/expr.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/expr.c
i686-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o errors.o -MT errors.o -MMD -MP -MF .deps/errors.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/errors.c
i686-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o directives-only.o -MT directives-only.o -MMD -MP -MF .deps/directives-only.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/directives-only.c
i686-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o directives.o -MT directives.o -MMD -MP -MF .deps/directives.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/directives.c
rm -f libcpp.a
i686-pc-linux-gnu-ar cru libcpp.a charset.o directives.o directives-only.o errors.o expr.o files.o identifiers.o init.o lex.o line-map.o macro.o mkdeps.o pch.o symtab.o traditional.o
i686-pc-linux-gnu-ranlib libcpp.a
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/libcpp'
make[3]: Entering directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/gcc'
TARGET_CPU_DEFAULT="" \
HEADERS="auto-host.h ansidecl.h" DEFINES="" \
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/mkconfig.sh config.h
i686-pc-linux-gnu-g++ -c -DEFAULT_PIE_SSP -fno-PIE -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -DGENERATOR_FILE -I. -Ibuild -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/build -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include \
-DBASEVER="\"4.8.3\"" -DDATESTAMP="\"\"" \
-DREVISION="\"\"" \
-DDEVPHASE="\"\"" -DPKGVERSION="\"(Gentoo Hardened 4.8.3 p1.1, pie-0.5.9) \"" \
-DBUGURL="\"<https://bugs.gentoo.org/>\"" -o build/version.o /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/version.c
rm -f tmp-all-tree.def
echo '#include "tree.def"' > tmp-all-tree.def
echo 'END_OF_BASE_TREE_CODES' >> tmp-all-tree.def
echo '#include "c-family/c-common.def"' >> tmp-all-tree.def
ltf="/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/ada/gcc-interface/ada-tree.def /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/cp/cp-tree.def /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/java/java-tree.def /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/objc/objc-tree.def"; for f in $ltf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/||' >> tmp-all-tree.def
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-all-tree.def all-tree.def
echo timestamp > s-alltree
lsf="/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/cp/lang-specs.h /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/lto/lang-specs.h"; for f in $lsf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/||' > tmp-specs.h
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-specs.h specs.h
echo timestamp > s-specs
echo "i686-pc-linux-gnu-g++ -DEFAULT_PIE_SSP -fno-PIE -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -static-libstdc++ -static-libgcc -Wl,-O1 -Wl,--as-needed" > checksum-options.tmp \
&& /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change checksum-options.tmp checksum-options
gawk -f /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/config/i386/i386-builtin-types.awk /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/config/i386/i386-builtin-types.def > tmp-bt.inc
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-bt.inc i386-builtin-types.inc
echo timestamp > s-i386-bt
cp /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c gcc-nm.c
cp /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c gcc-ranlib.c
rm -f mm_malloc.h
cat /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/config/i386/pmm_malloc.h > mm_malloc.h
TARGET_CPU_DEFAULT="" \
HEADERS="auto-host.h ansidecl.h" DEFINES="USED_FOR_TARGET " \
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/mkconfig.sh tconfig.h
(echo "@set version-GCC 4.8.3"; \
if [ "" = "experimental" ]; \
then echo "@set DEVELOPMENT"; \
else echo "@clear DEVELOPMENT"; \
fi) > gcc-vers.texiT
echo @set srcdir /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc >> gcc-vers.texiT
if [ -n "(Gentoo Hardened 4.8.3 p1.1, pie-0.5.9) " ]; then \
echo "@set VERSION_PACKAGE (Gentoo Hardened 4.8.3 p1.1, pie-0.5.9) " >> gcc-vers.texiT; \
fi
echo "@set BUGURL @uref{https://bugs.gentoo.org/}" >> gcc-vers.texiT; \
mv -f gcc-vers.texiT gcc-vers.texi
echo timestamp > gpl.pod
perl /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../contrib/texi2pod.pl /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/doc/include/gpl_v3.texi > gpl.pod
i686-pc-linux-gnu-g++ -c -DEFAULT_PIE_SSP -fno-PIE -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\" -DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"i686-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/i686-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"i686-pc-linux-gnu\" -DPERSONALITY=\"ar\" -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/
gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c -o gcc-ar.o
i686-pc-linux-gnu-g++ -c -DEFAULT_PIE_SSP -fno-PIE -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\" -DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"i686-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/i686-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"i686-pc-linux-gnu\" -DPERSONALITY=\"nm\" -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/
gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace gcc-nm.c -o gcc-nm.o
i686-pc-linux-gnu-g++ -c -DEFAULT_PIE_SSP -fno-PIE -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\" -DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"i686-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/i686-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"i686-pc-linux-gnu\" -DPERSONALITY=\"ranlib\" -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-de
vel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace gcc-ranlib.c -o gcc-ranlib.o
i686-pc-linux-gnu-g++ -c -DEFAULT_PIE_SSP -fno-PIE -DGENERATOR_FILE -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gengtype.c -o gengtype.o
/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gengtype.c:21:21: fatal error: bconfig.h: No such file or directory
#include "bconfig.h"
^
compilation terminated.
Makefile:1070: recipe for target 'gengtype.o' failed
make[3]: *** [gengtype.o] Error 1
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/gcc'
Makefile:4153: recipe for target 'all-stage1-gcc' failed
make[2]: *** [all-stage1-gcc] Error 2
make[2]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
Makefile:16937: recipe for target 'stage1-bubble' failed
make[1]: *** [stage1-bubble] Error 2
make[1]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
Makefile:17252: recipe for target 'bootstrap-lean' failed
make: *** [bootstrap-lean] Error 2
* ERROR: sys-devel/gcc-4.8.3::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-build-logs.tar.bz2 in your bug report.
*
* Messages for package sys-libs/timezone-data-2014j:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-apps/baselayout-2.2:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package sys-apps/sysvinit-2.88-r7:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package dev-python/setuptools-12.0.1:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyxattr-0.5.3:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-libs/glibc-2.19-r1:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-apps/coreutils-8.21:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/less-458:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package dev-python/pypax-0.8.4:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-devel/gcc-4.8.3:
* ERROR: sys-devel/gcc-4.8.3::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-build-logs.tar.bz2 in your bug report.
*
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1253, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1333, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1258, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20150318/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.ic6LU1/log/hardened_stage3.log
^ permalink raw reply [flat|nested] 24+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - hardened/stage3.spec
@ 2015-01-07 9:30 catalyst
0 siblings, 0 replies; 24+ messages in thread
From: catalyst @ 2015-01-07 9:30 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
checking linker *_sol2 emulation support... no
checking linker --sysroot support... yes
checking __stack_chk_fail in target C library... (cached) yes
checking sys/sdt.h in the target C library... no
checking dl_iterate_phdr in target C library... unknown
checking whether to enable maintainer-specific portions of Makefiles... no
Links are now set up to build a native compiler for i686-pc-linux-gnu.
checking for exported symbols... yes
checking for -rdynamic... yes
checking for library containing dlopen... -ldl
checking for -fPIC -shared... yes
checking if i686-pc-linux-gnu support esp... yes
checking checking for crtbeginP.o support... yes
configure: updating cache ./config.cache
configure: creating ./config.status
config.status: creating as
config.status: creating collect-ld
config.status: creating nm
config.status: creating Makefile
config.status: creating ada/gcc-interface/Makefile
config.status: creating ada/Makefile
config.status: creating auto-host.h
config.status: executing default commands
make[3]: Entering directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/gcc'
TARGET_CPU_DEFAULT="" \
HEADERS="auto-host.h ansidecl.h" DEFINES="" \
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/mkconfig.sh config.h
i686-pc-linux-gnu-g++ -c -DEFAULT_PIE_SSP -fno-PIE -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -DGENERATOR_FILE -I. -Ibuild -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/build -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include \
-DBASEVER="\"4.8.3\"" -DDATESTAMP="\"\"" \
-DREVISION="\"\"" \
-DDEVPHASE="\"\"" -DPKGVERSION="\"(Gentoo Hardened 4.8.3 p1.1, pie-0.5.9) \"" \
-DBUGURL="\"<https://bugs.gentoo.org/>\"" -o build/version.o /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/version.c
rm -f tmp-all-tree.def
echo '#include "tree.def"' > tmp-all-tree.def
echo 'END_OF_BASE_TREE_CODES' >> tmp-all-tree.def
echo '#include "c-family/c-common.def"' >> tmp-all-tree.def
ltf="/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/ada/gcc-interface/ada-tree.def /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/cp/cp-tree.def /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/java/java-tree.def /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/objc/objc-tree.def"; for f in $ltf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/||' >> tmp-all-tree.def
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-all-tree.def all-tree.def
echo timestamp > s-alltree
lsf="/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/cp/lang-specs.h /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/lto/lang-specs.h"; for f in $lsf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/||' > tmp-specs.h
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-specs.h specs.h
echo timestamp > s-specs
echo "i686-pc-linux-gnu-g++ -DEFAULT_PIE_SSP -fno-PIE -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -static-libstdc++ -static-libgcc -Wl,-O1 -Wl,--as-needed" > checksum-options.tmp \
&& /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change checksum-options.tmp checksum-options
gawk -f /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/config/i386/i386-builtin-types.awk /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/config/i386/i386-builtin-types.def > tmp-bt.inc
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-bt.inc i386-builtin-types.inc
echo timestamp > s-i386-bt
cp /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c gcc-nm.c
cp /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c gcc-ranlib.c
rm -f mm_malloc.h
cat /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/config/i386/pmm_malloc.h > mm_malloc.h
TARGET_CPU_DEFAULT="" \
HEADERS="auto-host.h ansidecl.h" DEFINES="USED_FOR_TARGET " \
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/mkconfig.sh tconfig.h
(echo "@set version-GCC 4.8.3"; \
if [ "" = "experimental" ]; \
then echo "@set DEVELOPMENT"; \
else echo "@clear DEVELOPMENT"; \
fi) > gcc-vers.texiT
echo @set srcdir /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc >> gcc-vers.texiT
if [ -n "(Gentoo Hardened 4.8.3 p1.1, pie-0.5.9) " ]; then \
echo "@set VERSION_PACKAGE (Gentoo Hardened 4.8.3 p1.1, pie-0.5.9) " >> gcc-vers.texiT; \
fi
echo "@set BUGURL @uref{https://bugs.gentoo.org/}" >> gcc-vers.texiT; \
mv -f gcc-vers.texiT gcc-vers.texi
echo timestamp > gpl.pod
perl /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../contrib/texi2pod.pl /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/doc/include/gpl_v3.texi > gpl.pod
i686-pc-linux-gnu-g++ -c -DEFAULT_PIE_SSP -fno-PIE -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\" -DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"i686-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/i686-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"i686-pc-linux-gnu\" -DPERSONALITY=\"ar\" -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/
gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c -o gcc-ar.o
i686-pc-linux-gnu-g++ -c -DEFAULT_PIE_SSP -fno-PIE -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\" -DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"i686-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/i686-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"i686-pc-linux-gnu\" -DPERSONALITY=\"nm\" -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/
gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace gcc-nm.c -o gcc-nm.o
i686-pc-linux-gnu-g++ -c -DEFAULT_PIE_SSP -fno-PIE -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\" -DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"i686-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/i686-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"i686-pc-linux-gnu\" -DPERSONALITY=\"ranlib\" -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-de
vel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace gcc-ranlib.c -o gcc-ranlib.o
i686-pc-linux-gnu-g++ -c -DEFAULT_PIE_SSP -fno-PIE -DGENERATOR_FILE -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gengtype.c -o gengtype.o
/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gengtype.c:21:21: fatal error: bconfig.h: No such file or directory
#include "bconfig.h"
^
compilation terminated.
Makefile:1070: recipe for target 'gengtype.o' failed
make[3]: *** [gengtype.o] Error 1
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/gcc'
Makefile:4153: recipe for target 'all-stage1-gcc' failed
make[2]: *** [all-stage1-gcc] Error 2
make[2]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
Makefile:16937: recipe for target 'stage1-bubble' failed
make[1]: *** [stage1-bubble] Error 2
make[1]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
Makefile:17252: recipe for target 'bootstrap-lean' failed
make: *** [bootstrap-lean] Error 2
* ERROR: sys-devel/gcc-4.8.3::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-build-logs.tar.bz2 in your bug report.
*
* Messages for package sys-libs/timezone-data-2014i-r1:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-apps/baselayout-2.2:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package app-portage/portage-utils-0.53:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package sys-apps/sysvinit-2.88-r7:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package dev-python/setuptools-7.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyxattr-0.5.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-libs/glibc-2.19-r1:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-apps/coreutils-8.21:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/less-458:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package dev-python/pypax-0.8.4:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-devel/gcc-4.8.3:
* ERROR: sys-devel/gcc-4.8.3::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-build-logs.tar.bz2 in your bug report.
*
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20150107/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.d959mB/log/hardened_stage3.log
^ permalink raw reply [flat|nested] 24+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - hardened/stage3.spec
@ 2014-12-24 8:34 catalyst
0 siblings, 0 replies; 24+ messages in thread
From: catalyst @ 2014-12-24 8:34 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
checking linker *_sol2 emulation support... no
checking linker --sysroot support... yes
checking __stack_chk_fail in target C library... (cached) yes
checking sys/sdt.h in the target C library... no
checking dl_iterate_phdr in target C library... unknown
checking whether to enable maintainer-specific portions of Makefiles... no
Links are now set up to build a native compiler for i686-pc-linux-gnu.
checking for exported symbols... yes
checking for -rdynamic... yes
checking for library containing dlopen... -ldl
checking for -fPIC -shared... yes
checking if i686-pc-linux-gnu support esp... yes
checking checking for crtbeginP.o support... yes
configure: updating cache ./config.cache
configure: creating ./config.status
config.status: creating as
config.status: creating collect-ld
config.status: creating nm
config.status: creating Makefile
config.status: creating ada/gcc-interface/Makefile
config.status: creating ada/Makefile
config.status: creating auto-host.h
config.status: executing default commands
make[3]: Entering directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/gcc'
TARGET_CPU_DEFAULT="" \
HEADERS="auto-host.h ansidecl.h" DEFINES="" \
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/mkconfig.sh config.h
i686-pc-linux-gnu-g++ -c -DEFAULT_PIE_SSP -fno-PIE -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -DGENERATOR_FILE -I. -Ibuild -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/build -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include \
-DBASEVER="\"4.8.3\"" -DDATESTAMP="\"\"" \
-DREVISION="\"\"" \
-DDEVPHASE="\"\"" -DPKGVERSION="\"(Gentoo Hardened 4.8.3 p1.1, pie-0.5.9) \"" \
-DBUGURL="\"<https://bugs.gentoo.org/>\"" -o build/version.o /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/version.c
rm -f tmp-all-tree.def
echo '#include "tree.def"' > tmp-all-tree.def
echo 'END_OF_BASE_TREE_CODES' >> tmp-all-tree.def
echo '#include "c-family/c-common.def"' >> tmp-all-tree.def
ltf="/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/ada/gcc-interface/ada-tree.def /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/cp/cp-tree.def /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/java/java-tree.def /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/objc/objc-tree.def"; for f in $ltf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/||' >> tmp-all-tree.def
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-all-tree.def all-tree.def
echo timestamp > s-alltree
lsf="/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/cp/lang-specs.h /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/lto/lang-specs.h"; for f in $lsf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/||' > tmp-specs.h
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-specs.h specs.h
echo timestamp > s-specs
echo "i686-pc-linux-gnu-g++ -DEFAULT_PIE_SSP -fno-PIE -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -static-libstdc++ -static-libgcc -Wl,-O1 -Wl,--as-needed" > checksum-options.tmp \
&& /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change checksum-options.tmp checksum-options
gawk -f /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/config/i386/i386-builtin-types.awk /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/config/i386/i386-builtin-types.def > tmp-bt.inc
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-bt.inc i386-builtin-types.inc
echo timestamp > s-i386-bt
cp /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c gcc-nm.c
cp /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c gcc-ranlib.c
rm -f mm_malloc.h
cat /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/config/i386/pmm_malloc.h > mm_malloc.h
TARGET_CPU_DEFAULT="" \
HEADERS="auto-host.h ansidecl.h" DEFINES="USED_FOR_TARGET " \
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/mkconfig.sh tconfig.h
(echo "@set version-GCC 4.8.3"; \
if [ "" = "experimental" ]; \
then echo "@set DEVELOPMENT"; \
else echo "@clear DEVELOPMENT"; \
fi) > gcc-vers.texiT
echo @set srcdir /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc >> gcc-vers.texiT
if [ -n "(Gentoo Hardened 4.8.3 p1.1, pie-0.5.9) " ]; then \
echo "@set VERSION_PACKAGE (Gentoo Hardened 4.8.3 p1.1, pie-0.5.9) " >> gcc-vers.texiT; \
fi
echo "@set BUGURL @uref{https://bugs.gentoo.org/}" >> gcc-vers.texiT; \
mv -f gcc-vers.texiT gcc-vers.texi
echo timestamp > gpl.pod
perl /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../contrib/texi2pod.pl /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/doc/include/gpl_v3.texi > gpl.pod
i686-pc-linux-gnu-g++ -c -DEFAULT_PIE_SSP -fno-PIE -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\" -DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"i686-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/i686-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"i686-pc-linux-gnu\" -DPERSONALITY=\"ar\" -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/
gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c -o gcc-ar.o
i686-pc-linux-gnu-g++ -c -DEFAULT_PIE_SSP -fno-PIE -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\" -DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"i686-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/i686-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"i686-pc-linux-gnu\" -DPERSONALITY=\"nm\" -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/
gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace gcc-nm.c -o gcc-nm.o
i686-pc-linux-gnu-g++ -c -DEFAULT_PIE_SSP -fno-PIE -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\" -DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"i686-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/i686-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"i686-pc-linux-gnu\" -DPERSONALITY=\"ranlib\" -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-de
vel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace gcc-ranlib.c -o gcc-ranlib.o
i686-pc-linux-gnu-g++ -c -DEFAULT_PIE_SSP -fno-PIE -DGENERATOR_FILE -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gengtype.c -o gengtype.o
/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gengtype.c:21:21: fatal error: bconfig.h: No such file or directory
#include "bconfig.h"
^
compilation terminated.
Makefile:1070: recipe for target 'gengtype.o' failed
make[3]: *** [gengtype.o] Error 1
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/gcc'
Makefile:4153: recipe for target 'all-stage1-gcc' failed
make[2]: *** [all-stage1-gcc] Error 2
make[2]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
Makefile:16937: recipe for target 'stage1-bubble' failed
make[1]: *** [stage1-bubble] Error 2
make[1]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
Makefile:17252: recipe for target 'bootstrap-lean' failed
make: *** [bootstrap-lean] Error 2
* ERROR: sys-devel/gcc-4.8.3::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-build-logs.tar.bz2 in your bug report.
*
* Messages for package sys-libs/timezone-data-2014i-r1:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-apps/baselayout-2.2:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package app-portage/portage-utils-0.53:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package sys-apps/sysvinit-2.88-r7:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package dev-python/setuptools-7.0:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package dev-python/pyxattr-0.5.2:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-libs/glibc-2.19-r1:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-apps/coreutils-8.21:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/less-458:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package dev-python/pypax-0.8.4:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-devel/gcc-4.8.3:
* ERROR: sys-devel/gcc-4.8.3::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-build-logs.tar.bz2 in your bug report.
*
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20141224/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.6QKxUA/log/hardened_stage3.log
^ permalink raw reply [flat|nested] 24+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - hardened/stage3.spec
@ 2014-06-08 12:22 catalyst
0 siblings, 0 replies; 24+ messages in thread
From: catalyst @ 2014-06-08 12:22 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging (82 of 206) virtual/perl-Test-Harness-3.260.0
>>> Installing (82 of 206) virtual/perl-Test-Harness-3.260.0
>>> Emerging (83 of 206) virtual/perl-Compress-Raw-Bzip2-2.60.0
>>> Installing (83 of 206) virtual/perl-Compress-Raw-Bzip2-2.60.0
>>> Emerging (84 of 206) virtual/perl-Compress-Raw-Zlib-2.60.0
>>> Installing (84 of 206) virtual/perl-Compress-Raw-Zlib-2.60.0
>>> Emerging (85 of 206) virtual/perl-Module-CoreList-2.840.0
>>> Installing (85 of 206) virtual/perl-Module-CoreList-2.840.0
>>> Emerging (86 of 206) virtual/perl-Module-Load-0.240.0
>>> Installing (86 of 206) virtual/perl-Module-Load-0.240.0
>>> Emerging (87 of 206) virtual/perl-ExtUtils-Manifest-1.610.0
>>> Installing (87 of 206) virtual/perl-ExtUtils-Manifest-1.610.0
>>> Emerging (88 of 206) virtual/perl-ExtUtils-Install-1.540.0
>>> Installing (88 of 206) virtual/perl-ExtUtils-Install-1.540.0
>>> Emerging (89 of 206) virtual/perl-IO-1.25
>>> Installing (89 of 206) virtual/perl-IO-1.25
>>> Emerging (90 of 206) perl-core/IO-Compress-2.60.0
>>> Installing (90 of 206) perl-core/IO-Compress-2.60.0
>>> Emerging (91 of 206) perl-core/Module-Metadata-1.0.11
>>> Installing (91 of 206) perl-core/Module-Metadata-1.0.11
>>> Emerging (92 of 206) perl-core/Parse-CPAN-Meta-1.440.400
>>> Installing (92 of 206) perl-core/Parse-CPAN-Meta-1.440.400
>>> Emerging (93 of 206) perl-core/CPAN-Meta-Requirements-2.122.0
>>> Installing (93 of 206) perl-core/CPAN-Meta-Requirements-2.122.0
>>> Emerging (94 of 206) virtual/perl-Parse-CPAN-Meta-1.440.400
>>> Installing (94 of 206) virtual/perl-Parse-CPAN-Meta-1.440.400
>>> Emerging (95 of 206) virtual/perl-Module-Metadata-1.0.11
>>> Installing (95 of 206) virtual/perl-Module-Metadata-1.0.11
>>> Emerging (96 of 206) virtual/perl-IO-Compress-2.60.0
>>> Installing (96 of 206) virtual/perl-IO-Compress-2.60.0
>>> Emerging (97 of 206) virtual/perl-CPAN-Meta-Requirements-2.122.0
>>> Installing (97 of 206) virtual/perl-CPAN-Meta-Requirements-2.122.0
>>> Emerging (98 of 206) perl-core/Archive-Tar-1.900.0
>>> Installing (98 of 206) perl-core/Archive-Tar-1.900.0
>>> Emerging (99 of 206) perl-core/Module-Load-Conditional-0.540.0
>>> Installing (99 of 206) perl-core/Module-Load-Conditional-0.540.0
>>> Emerging (100 of 206) virtual/perl-Archive-Tar-1.900.0
>>> Installing (100 of 206) virtual/perl-Archive-Tar-1.900.0
>>> Emerging (101 of 206) virtual/perl-Module-Load-Conditional-0.540.0
>>> Installing (101 of 206) virtual/perl-Module-Load-Conditional-0.540.0
>>> Emerging (102 of 206) perl-core/IPC-Cmd-0.780.0
>>> Installing (102 of 206) perl-core/IPC-Cmd-0.780.0
>>> Emerging (103 of 206) virtual/perl-IPC-Cmd-0.780.0
>>> Installing (103 of 206) virtual/perl-IPC-Cmd-0.780.0
>>> Emerging (104 of 206) perl-core/ExtUtils-CBuilder-0.280.205
>>> Installing (104 of 206) perl-core/ExtUtils-CBuilder-0.280.205
>>> Emerging (105 of 206) virtual/perl-ExtUtils-CBuilder-0.280.205
>>> Installing (105 of 206) virtual/perl-ExtUtils-CBuilder-0.280.205
>>> Emerging (106 of 206) perl-core/ExtUtils-ParseXS-3.180.0
>>> Installing (106 of 206) perl-core/ExtUtils-ParseXS-3.180.0
>>> Emerging (107 of 206) virtual/perl-ExtUtils-ParseXS-3.180.0
>>> Installing (107 of 206) virtual/perl-ExtUtils-ParseXS-3.180.0
>>> Emerging (108 of 206) dev-util/gtk-doc-am-1.20
>>> Installing (108 of 206) dev-util/gtk-doc-am-1.20
>>> Emerging (109 of 206) perl-core/ExtUtils-MakeMaker-6.640.0
>>> Installing (109 of 206) perl-core/ExtUtils-MakeMaker-6.640.0
>>> Emerging (110 of 206) virtual/perl-ExtUtils-MakeMaker-6.640.0
>>> Installing (110 of 206) virtual/perl-ExtUtils-MakeMaker-6.640.0
>>> Emerging (111 of 206) perl-core/CPAN-Meta-2.120.921
>>> Installing (111 of 206) perl-core/CPAN-Meta-2.120.921
>>> Emerging (112 of 206) virtual/perl-CPAN-Meta-2.120.921
>>> Installing (112 of 206) virtual/perl-CPAN-Meta-2.120.921
>>> Emerging (113 of 206) perl-core/Module-Build-0.400.300
>>> Installing (113 of 206) perl-core/Module-Build-0.400.300
>>> Emerging (114 of 206) virtual/perl-Module-Build-0.400.300
>>> Installing (114 of 206) virtual/perl-Module-Build-0.400.300
>>> Emerging (115 of 206) dev-util/intltool-0.50.2-r1
>>> Installing (115 of 206) dev-util/intltool-0.50.2-r1
>>> Emerging (116 of 206) sys-libs/glibc-2.17
>>> Installing (116 of 206) sys-libs/glibc-2.17
>>> Emerging (117 of 206) virtual/libc-0
>>> Installing (117 of 206) virtual/libc-0
>>> Emerging (118 of 206) sys-apps/acl-2.2.51
>>> Installing (118 of 206) sys-apps/acl-2.2.51
>>> Emerging (119 of 206) sys-apps/coreutils-8.21
>>> Installing (119 of 206) sys-apps/coreutils-8.21
>>> Emerging (120 of 206) virtual/acl-0-r1
>>> Installing (120 of 206) virtual/acl-0-r1
>>> Emerging (121 of 206) sys-apps/sed-4.2.1-r1
>>> Installing (121 of 206) sys-apps/sed-4.2.1-r1
>>> Emerging (122 of 206) app-admin/eselect-1.4.1
>>> Installing (122 of 206) app-admin/eselect-1.4.1
>>> Emerging (123 of 206) dev-libs/elfutils-0.158
>>> Installing (123 of 206) dev-libs/elfutils-0.158
>>> Emerging (124 of 206) dev-libs/libpcre-8.33
>>> Installing (124 of 206) dev-libs/libpcre-8.33
>>> Emerging (125 of 206) sys-apps/less-457
>>> Installing (125 of 206) sys-apps/less-457
>>> Emerging (126 of 206) virtual/pager-0
>>> Installing (126 of 206) virtual/pager-0
>>> Emerging (127 of 206) sys-apps/texinfo-4.13-r2
>>> Installing (127 of 206) sys-apps/texinfo-4.13-r2
>>> Emerging (128 of 206) app-shells/bash-4.2_p45
>>> Installing (128 of 206) app-shells/bash-4.2_p45
>>> Emerging (129 of 206) app-admin/perl-cleaner-2.7
>>> Installing (129 of 206) app-admin/perl-cleaner-2.7
>>> Emerging (130 of 206) sys-devel/make-3.82-r4
>>> Installing (130 of 206) sys-devel/make-3.82-r4
>>> Emerging (131 of 206) sys-apps/kmod-17
>>> Installing (131 of 206) sys-apps/kmod-17
>>> Emerging (132 of 206) virtual/modutils-0
>>> Installing (132 of 206) virtual/modutils-0
>>> Emerging (133 of 206) sys-process/psmisc-22.20
>>> Installing (133 of 206) sys-process/psmisc-22.20
>>> Emerging (134 of 206) net-misc/rsync-3.0.9-r3
>>> Installing (134 of 206) net-misc/rsync-3.0.9-r3
>>> Emerging (135 of 206) sys-apps/diffutils-3.3
>>> Installing (135 of 206) sys-apps/diffutils-3.3
>>> Emerging (136 of 206) dev-libs/openssl-1.0.1g
>>> Installing (136 of 206) dev-libs/openssl-1.0.1g
>>> Emerging (137 of 206) app-misc/ca-certificates-20130906-r1
>>> Installing (137 of 206) app-misc/ca-certificates-20130906-r1
>>> Emerging (138 of 206) net-misc/iputils-20121221
>>> Installing (138 of 206) net-misc/iputils-20121221
>>> Emerging (139 of 206) dev-lang/python-3.3.3
* Messages for package sys-apps/baselayout-2.2:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package sys-libs/timezone-data-2014a:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package app-portage/portage-utils-0.53:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package sys-apps/sysvinit-2.88-r7:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package sys-libs/gdbm-1.8.3-r4:
* 32bit systems might have to rebuild all gdbm databases due to
* LFS changes in the gdbm format. You can either delete the db
* and regenerate it from scratch, or use the converter:
* http://bugs.gentoo.org/attachment.cgi?id=215326
*
* See this comment for information on how to use it:
* http://bugs.gentoo.org/299390#c15
*
* You should be able to locate most gdbm db's on your system with:
* find /etc /var -type f -exec file {} + | grep 'GNU dbm 1.x or ndbm database'
*
* You could also try using this helper script:
* http://bugs.gentoo.org/attachment.cgi?id=222581
* Messages for package sys-libs/glibc-2.17:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-apps/coreutils-8.21:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/less-457:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package app-misc/ca-certificates-20130906-r1:
* You should run update-ca-certificates manually after etc-update
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1243, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 539, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1303, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1248, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20140603/.catalyst_lock'
Full build log at /release/tmp/run/catalyst-auto.20222/log/hardened_stage3.log
^ permalink raw reply [flat|nested] 24+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - hardened/stage3.spec
@ 2012-04-18 12:53 catalyst
0 siblings, 0 replies; 24+ messages in thread
From: catalyst @ 2012-04-18 12:53 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* just delete the rules file
* rm /etc/udev/rules.d/70-persistent-net.rules
* and then reboot.
*
* This may however number your devices in a different way than they are now.
*
* If you build an initramfs including udev, then please
* make sure that the /sbin/udevadm binary gets included,
* and your scripts changed to use it,as it replaces the
* old helper apps udevinfo, udevtrigger, ...
*
* mount options for directory /dev are no longer
* set in /etc/udev/udev.conf, but in /etc/fstab
* as for other directories.
*
* If you use /dev/md/*, /dev/loop/* or /dev/rd/*,
* then please migrate over to using the device names
* /dev/md*, /dev/loop* and /dev/ram*.
* The devfs-compat rules have been removed.
* For reference see Bug #269359.
*
* Rules for /dev/hd* devices have been removed
* Please migrate to libata.
*
* For more information on udev on Gentoo, writing udev rules, and
* fixing known issues visit:
* http://www.gentoo.org/doc/en/udev-guide.xml
* Messages for package dev-vcs/git-1.7.3.4-r1:
* These additional scripts need some dependencies:
* git-quiltimport : dev-util/quilt
* git-instaweb : || ( www-servers/lighttpd www-servers/apache )
* Messages for package sys-apps/coreutils-8.14:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package net-misc/wget-1.12-r3:
* The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
* Messages for package sys-fs/e2fsprogs-1.42:
* No /etc/mtab file, creating one temporarily
* Messages for package sys-libs/pam-1.1.5:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-auth/pambase-20101024-r2:
* Starting from version 20080801, pambase optionally enables
* SHA512-hashed passwords. For this to work, you need sys-libs/pam-1.0.1
* built against sys-libs/glibc-2.7 or later.
* If you don't have support for this, it will automatically fallback
* to MD5-hashed passwords, just like before.
*
* Please note that the change only affects the newly-changed passwords
* and that SHA512-hashed passwords will not work on earlier versions
* of glibc or Linux-PAM.
* Messages for package sys-apps/openrc-0.9.8.4:
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
*
* Please read the migration guide available at:
* http://www.gentoo.org/doc/en/openrc-migration.xml
* Messages for package sys-apps/busybox-1.19.3-r1:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.19.3-r1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.19.3-r1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* This ebuild has support for user defined configs
* Please read this ebuild for more details and re-emerge as needed
* if you want to add or remove functionality for busybox
* Messages for package net-misc/openssh-5.9_p1-r4:
* Starting with openssh-5.8p1, the server will default to a newer key
* algorithm (ECDSA). You are encouraged to manually update your stored
* keys list as servers update theirs. See ssh-keyscan(1) for more info.
* Remember to merge your config files in /etc/ssh/ and then
* reload sshd: '/etc/init.d/sshd reload'.
* Please be aware users need a valid shell in /etc/passwd
* in order to be allowed to login.
removing /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120417/tmp/chroot-functions.sh from the chroot
--- Running action sequence: preclean
copying stage3-preclean-chroot.sh to /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120417/tmp/
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120417/tmp/
Running stage3-preclean-chroot.sh in chroot /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120417/
>>> Regenerating /etc/ld.so.cache...
emerge --depclean --with-bdeps=n
!!! CONFIG_PROTECT is empty
* Depclean may break link level dependencies. Thus, it is
* recommended to use a tool such as `revdep-rebuild` (from
* app-portage/gentoolkit) in order to detect such breakage.
*
* Always study the list of packages to be cleaned for any obvious
* mistakes. Packages that are part of the world set will always
* be kept. They can be manually added to this set with
* `emerge --noreplace <atom>`. Packages that are listed in
* package.provided (see portage(5)) will be removed by
* depclean, even if they are part of the world set.
*
* As a safety measure, depclean will not remove any packages
* unless *all* required dependencies have been resolved. As a
* consequence, it is often necessary to run `emerge --update
* --newuse --deep @world` prior to depclean.
!!! You have no world file.
!!! Proceeding is likely to break your installation.
Calculating dependencies \b\b... done!
* Dependencies could not be completely resolved due to
* the following required packages not being installed:
*
* >=sys-libs/ncurses-5.2[unicode] pulled in by:
* app-editors/nano-2.2.5
*
* Have you forgotten to do a complete update prior to depclean? The
* most comprehensive command for this purpose is as follows:
*
* emerge --update --newuse --deep --with-bdeps=y @world
*
* Note that the --with-bdeps=y option is not required in many
* situations. Refer to the emerge manual page (run `man emerge`)
* for more information about --with-bdeps.
*
* Also, note that it may be necessary to manually uninstall
* packages that no longer exist in the portage tree, since it may
* not be possible to satisfy their dependencies.
* IMPORTANT: 2 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
!!! catalyst: preclean script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1167, in preclean
" preclean","preclean script failed.",env=self.env)
File "/usr/lib64/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Build failed, could not execute preclean
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1172, in preclean
raise CatalystError, "Build failed, could not execute preclean"
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120417/.catalyst_lock'
Full build log at /tmp/catalyst-auto.28803/log/hardened_stage3.log
^ permalink raw reply [flat|nested] 24+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - hardened/stage3.spec
@ 2012-04-11 12:59 catalyst
0 siblings, 0 replies; 24+ messages in thread
From: catalyst @ 2012-04-11 12:59 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* just delete the rules file
* rm /etc/udev/rules.d/70-persistent-net.rules
* and then reboot.
*
* This may however number your devices in a different way than they are now.
*
* If you build an initramfs including udev, then please
* make sure that the /sbin/udevadm binary gets included,
* and your scripts changed to use it,as it replaces the
* old helper apps udevinfo, udevtrigger, ...
*
* mount options for directory /dev are no longer
* set in /etc/udev/udev.conf, but in /etc/fstab
* as for other directories.
*
* If you use /dev/md/*, /dev/loop/* or /dev/rd/*,
* then please migrate over to using the device names
* /dev/md*, /dev/loop* and /dev/ram*.
* The devfs-compat rules have been removed.
* For reference see Bug #269359.
*
* Rules for /dev/hd* devices have been removed
* Please migrate to libata.
*
* For more information on udev on Gentoo, writing udev rules, and
* fixing known issues visit:
* http://www.gentoo.org/doc/en/udev-guide.xml
* Messages for package dev-vcs/git-1.7.3.4-r1:
* These additional scripts need some dependencies:
* git-quiltimport : dev-util/quilt
* git-instaweb : || ( www-servers/lighttpd www-servers/apache )
* Messages for package sys-apps/coreutils-8.14:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package net-misc/wget-1.12-r3:
* The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
* Messages for package sys-fs/e2fsprogs-1.42:
* No /etc/mtab file, creating one temporarily
* Messages for package sys-libs/pam-1.1.5:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-auth/pambase-20101024-r2:
* Starting from version 20080801, pambase optionally enables
* SHA512-hashed passwords. For this to work, you need sys-libs/pam-1.0.1
* built against sys-libs/glibc-2.7 or later.
* If you don't have support for this, it will automatically fallback
* to MD5-hashed passwords, just like before.
*
* Please note that the change only affects the newly-changed passwords
* and that SHA512-hashed passwords will not work on earlier versions
* of glibc or Linux-PAM.
* Messages for package sys-apps/openrc-0.9.8.4:
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
*
* Please read the migration guide available at:
* http://www.gentoo.org/doc/en/openrc-migration.xml
* Messages for package sys-apps/busybox-1.19.3-r1:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.19.3-r1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.19.3-r1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* This ebuild has support for user defined configs
* Please read this ebuild for more details and re-emerge as needed
* if you want to add or remove functionality for busybox
* Messages for package net-misc/openssh-5.9_p1-r4:
* Starting with openssh-5.8p1, the server will default to a newer key
* algorithm (ECDSA). You are encouraged to manually update your stored
* keys list as servers update theirs. See ssh-keyscan(1) for more info.
* Remember to merge your config files in /etc/ssh/ and then
* reload sshd: '/etc/init.d/sshd reload'.
* Please be aware users need a valid shell in /etc/passwd
* in order to be allowed to login.
removing /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120410/tmp/chroot-functions.sh from the chroot
--- Running action sequence: preclean
copying stage3-preclean-chroot.sh to /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120410/tmp/
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120410/tmp/
Running stage3-preclean-chroot.sh in chroot /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120410/
>>> Regenerating /etc/ld.so.cache...
emerge --depclean --with-bdeps=n
!!! CONFIG_PROTECT is empty
* Depclean may break link level dependencies. Thus, it is
* recommended to use a tool such as `revdep-rebuild` (from
* app-portage/gentoolkit) in order to detect such breakage.
*
* Always study the list of packages to be cleaned for any obvious
* mistakes. Packages that are part of the world set will always
* be kept. They can be manually added to this set with
* `emerge --noreplace <atom>`. Packages that are listed in
* package.provided (see portage(5)) will be removed by
* depclean, even if they are part of the world set.
*
* As a safety measure, depclean will not remove any packages
* unless *all* required dependencies have been resolved. As a
* consequence, it is often necessary to run `emerge --update
* --newuse --deep @world` prior to depclean.
!!! You have no world file.
!!! Proceeding is likely to break your installation.
Calculating dependencies \b\b... done!
* Dependencies could not be completely resolved due to
* the following required packages not being installed:
*
* >=sys-libs/ncurses-5.2[unicode] pulled in by:
* app-editors/nano-2.2.5
*
* Have you forgotten to do a complete update prior to depclean? The
* most comprehensive command for this purpose is as follows:
*
* emerge --update --newuse --deep --with-bdeps=y @world
*
* Note that the --with-bdeps=y option is not required in many
* situations. Refer to the emerge manual page (run `man emerge`)
* for more information about --with-bdeps.
*
* Also, note that it may be necessary to manually uninstall
* packages that no longer exist in the portage tree, since it may
* not be possible to satisfy their dependencies.
* IMPORTANT: 2 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
!!! catalyst: preclean script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1167, in preclean
" preclean","preclean script failed.",env=self.env)
File "/usr/lib64/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Build failed, could not execute preclean
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1172, in preclean
raise CatalystError, "Build failed, could not execute preclean"
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120410/.catalyst_lock'
Full build log at /tmp/catalyst-auto.12049/log/hardened_stage3.log
^ permalink raw reply [flat|nested] 24+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - hardened/stage3.spec
@ 2012-04-04 12:53 catalyst
0 siblings, 0 replies; 24+ messages in thread
From: catalyst @ 2012-04-04 12:53 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* just delete the rules file
* rm /etc/udev/rules.d/70-persistent-net.rules
* and then reboot.
*
* This may however number your devices in a different way than they are now.
*
* If you build an initramfs including udev, then please
* make sure that the /sbin/udevadm binary gets included,
* and your scripts changed to use it,as it replaces the
* old helper apps udevinfo, udevtrigger, ...
*
* mount options for directory /dev are no longer
* set in /etc/udev/udev.conf, but in /etc/fstab
* as for other directories.
*
* If you use /dev/md/*, /dev/loop/* or /dev/rd/*,
* then please migrate over to using the device names
* /dev/md*, /dev/loop* and /dev/ram*.
* The devfs-compat rules have been removed.
* For reference see Bug #269359.
*
* Rules for /dev/hd* devices have been removed
* Please migrate to libata.
*
* For more information on udev on Gentoo, writing udev rules, and
* fixing known issues visit:
* http://www.gentoo.org/doc/en/udev-guide.xml
* Messages for package dev-vcs/git-1.7.3.4-r1:
* These additional scripts need some dependencies:
* git-quiltimport : dev-util/quilt
* git-instaweb : || ( www-servers/lighttpd www-servers/apache )
* Messages for package sys-apps/coreutils-8.14:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package net-misc/wget-1.12-r3:
* The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
* Messages for package sys-fs/e2fsprogs-1.42:
* No /etc/mtab file, creating one temporarily
* Messages for package sys-libs/pam-1.1.5:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-auth/pambase-20101024-r2:
* Starting from version 20080801, pambase optionally enables
* SHA512-hashed passwords. For this to work, you need sys-libs/pam-1.0.1
* built against sys-libs/glibc-2.7 or later.
* If you don't have support for this, it will automatically fallback
* to MD5-hashed passwords, just like before.
*
* Please note that the change only affects the newly-changed passwords
* and that SHA512-hashed passwords will not work on earlier versions
* of glibc or Linux-PAM.
* Messages for package sys-apps/openrc-0.9.8.4:
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
*
* Please read the migration guide available at:
* http://www.gentoo.org/doc/en/openrc-migration.xml
* Messages for package sys-apps/busybox-1.19.3-r1:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.19.3-r1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.19.3-r1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* This ebuild has support for user defined configs
* Please read this ebuild for more details and re-emerge as needed
* if you want to add or remove functionality for busybox
* Messages for package net-misc/openssh-5.8_p1-r1:
* Starting with openssh-5.8p1, the server will default to a newer key
* algorithm (ECDSA). You are encouraged to manually update your stored
* keys list as servers update theirs. See ssh-keyscan(1) for more info.
* Remember to merge your config files in /etc/ssh/ and then
* reload sshd: '/etc/init.d/sshd reload'.
* Please be aware users need a valid shell in /etc/passwd
* in order to be allowed to login.
removing /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120403/tmp/chroot-functions.sh from the chroot
--- Running action sequence: preclean
copying stage3-preclean-chroot.sh to /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120403/tmp/
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120403/tmp/
Running stage3-preclean-chroot.sh in chroot /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120403/
>>> Regenerating /etc/ld.so.cache...
emerge --depclean --with-bdeps=n
!!! CONFIG_PROTECT is empty
* Depclean may break link level dependencies. Thus, it is
* recommended to use a tool such as `revdep-rebuild` (from
* app-portage/gentoolkit) in order to detect such breakage.
*
* Always study the list of packages to be cleaned for any obvious
* mistakes. Packages that are part of the world set will always
* be kept. They can be manually added to this set with
* `emerge --noreplace <atom>`. Packages that are listed in
* package.provided (see portage(5)) will be removed by
* depclean, even if they are part of the world set.
*
* As a safety measure, depclean will not remove any packages
* unless *all* required dependencies have been resolved. As a
* consequence, it is often necessary to run `emerge --update
* --newuse --deep @world` prior to depclean.
!!! You have no world file.
!!! Proceeding is likely to break your installation.
Calculating dependencies \b\b... done!
* Dependencies could not be completely resolved due to
* the following required packages not being installed:
*
* >=sys-libs/ncurses-5.2[unicode] pulled in by:
* app-editors/nano-2.2.5
*
* Have you forgotten to do a complete update prior to depclean? The
* most comprehensive command for this purpose is as follows:
*
* emerge --update --newuse --deep --with-bdeps=y @world
*
* Note that the --with-bdeps=y option is not required in many
* situations. Refer to the emerge manual page (run `man emerge`)
* for more information about --with-bdeps.
*
* Also, note that it may be necessary to manually uninstall
* packages that no longer exist in the portage tree, since it may
* not be possible to satisfy their dependencies.
* IMPORTANT: 2 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
!!! catalyst: preclean script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1167, in preclean
" preclean","preclean script failed.",env=self.env)
File "/usr/lib64/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Build failed, could not execute preclean
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1172, in preclean
raise CatalystError, "Build failed, could not execute preclean"
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120403/.catalyst_lock'
Full build log at /tmp/catalyst-auto.13027/log/hardened_stage3.log
^ permalink raw reply [flat|nested] 24+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - hardened/stage3.spec
@ 2012-03-28 12:48 catalyst
0 siblings, 0 replies; 24+ messages in thread
From: catalyst @ 2012-03-28 12:48 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* just delete the rules file
* rm /etc/udev/rules.d/70-persistent-net.rules
* and then reboot.
*
* This may however number your devices in a different way than they are now.
*
* If you build an initramfs including udev, then please
* make sure that the /sbin/udevadm binary gets included,
* and your scripts changed to use it,as it replaces the
* old helper apps udevinfo, udevtrigger, ...
*
* mount options for directory /dev are no longer
* set in /etc/udev/udev.conf, but in /etc/fstab
* as for other directories.
*
* If you use /dev/md/*, /dev/loop/* or /dev/rd/*,
* then please migrate over to using the device names
* /dev/md*, /dev/loop* and /dev/ram*.
* The devfs-compat rules have been removed.
* For reference see Bug #269359.
*
* Rules for /dev/hd* devices have been removed
* Please migrate to libata.
*
* For more information on udev on Gentoo, writing udev rules, and
* fixing known issues visit:
* http://www.gentoo.org/doc/en/udev-guide.xml
* Messages for package sys-apps/coreutils-8.14:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package net-misc/wget-1.12-r3:
* The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
* Messages for package sys-fs/e2fsprogs-1.42:
* No /etc/mtab file, creating one temporarily
* Messages for package sys-apps/man-pages-3.35:
* If you don't have a makewhatis cronjob, then you
* should update the whatis database yourself:
* # makewhatis -u
* Messages for package sys-libs/pam-1.1.5:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-auth/pambase-20101024-r2:
* Starting from version 20080801, pambase optionally enables
* SHA512-hashed passwords. For this to work, you need sys-libs/pam-1.0.1
* built against sys-libs/glibc-2.7 or later.
* If you don't have support for this, it will automatically fallback
* to MD5-hashed passwords, just like before.
*
* Please note that the change only affects the newly-changed passwords
* and that SHA512-hashed passwords will not work on earlier versions
* of glibc or Linux-PAM.
* Messages for package sys-apps/busybox-1.19.3-r1:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.19.3-r1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.19.3-r1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* This ebuild has support for user defined configs
* Please read this ebuild for more details and re-emerge as needed
* if you want to add or remove functionality for busybox
* Messages for package net-misc/openssh-5.8_p1-r1:
* Starting with openssh-5.8p1, the server will default to a newer key
* algorithm (ECDSA). You are encouraged to manually update your stored
* keys list as servers update theirs. See ssh-keyscan(1) for more info.
* Remember to merge your config files in /etc/ssh/ and then
* reload sshd: '/etc/init.d/sshd reload'.
* Please be aware users need a valid shell in /etc/passwd
* in order to be allowed to login.
* Messages for package sys-apps/openrc-0.9.8.4:
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
*
* Please read the migration guide available at:
* http://www.gentoo.org/doc/en/openrc-migration.xml
removing /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120327/tmp/chroot-functions.sh from the chroot
--- Running action sequence: preclean
copying stage3-preclean-chroot.sh to /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120327/tmp/
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120327/tmp/
Running stage3-preclean-chroot.sh in chroot /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120327/
>>> Regenerating /etc/ld.so.cache...
emerge --depclean --with-bdeps=n
!!! CONFIG_PROTECT is empty
* Depclean may break link level dependencies. Thus, it is
* recommended to use a tool such as `revdep-rebuild` (from
* app-portage/gentoolkit) in order to detect such breakage.
*
* Always study the list of packages to be cleaned for any obvious
* mistakes. Packages that are part of the world set will always
* be kept. They can be manually added to this set with
* `emerge --noreplace <atom>`. Packages that are listed in
* package.provided (see portage(5)) will be removed by
* depclean, even if they are part of the world set.
*
* As a safety measure, depclean will not remove any packages
* unless *all* required dependencies have been resolved. As a
* consequence, it is often necessary to run `emerge --update
* --newuse --deep @world` prior to depclean.
!!! You have no world file.
!!! Proceeding is likely to break your installation.
Calculating dependencies \b\b... done!
* Dependencies could not be completely resolved due to
* the following required packages not being installed:
*
* >=sys-libs/ncurses-5.2[unicode] pulled in by:
* app-editors/nano-2.2.5
*
* Have you forgotten to do a complete update prior to depclean? The
* most comprehensive command for this purpose is as follows:
*
* emerge --update --newuse --deep --with-bdeps=y @world
*
* Note that the --with-bdeps=y option is not required in many
* situations. Refer to the emerge manual page (run `man emerge`)
* for more information about --with-bdeps.
*
* Also, note that it may be necessary to manually uninstall
* packages that no longer exist in the portage tree, since it may
* not be possible to satisfy their dependencies.
* IMPORTANT: 2 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
!!! catalyst: preclean script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1167, in preclean
" preclean","preclean script failed.",env=self.env)
File "/usr/lib64/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Build failed, could not execute preclean
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1172, in preclean
raise CatalystError, "Build failed, could not execute preclean"
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120327/.catalyst_lock'
Full build log at /tmp/catalyst-auto.22384/log/hardened_stage3.log
^ permalink raw reply [flat|nested] 24+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - hardened/stage3.spec
@ 2012-03-21 12:09 catalyst
0 siblings, 0 replies; 24+ messages in thread
From: catalyst @ 2012-03-21 12:09 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*
* mount options for directory /dev are no longer
* set in /etc/udev/udev.conf, but in /etc/fstab
* as for other directories.
*
* If you use /dev/md/*, /dev/loop/* or /dev/rd/*,
* then please migrate over to using the device names
* /dev/md*, /dev/loop* and /dev/ram*.
* The devfs-compat rules have been removed.
* For reference see Bug #269359.
*
* Rules for /dev/hd* devices have been removed
* Please migrate to libata.
*
* For more information on udev on Gentoo, writing udev rules, and
* fixing known issues visit:
* http://www.gentoo.org/doc/en/udev-guide.xml
* Messages for package sys-apps/coreutils-8.14:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package net-misc/wget-1.12-r3:
* The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
* Messages for package sys-fs/e2fsprogs-1.42:
* No /etc/mtab file, creating one temporarily
* Messages for package sys-devel/gcc-4.5.3-r2:
* PT PaX marking -r
* /var/tmp/portage/sys-devel/gcc-4.5.3-r2/image//usr/libexec/gcc/i686-pc-linux-gnu/4.5.3/cc1
* PT PaX marking -r
* /var/tmp/portage/sys-devel/gcc-4.5.3-r2/image//usr/libexec/gcc/i686-pc-linux-gnu/4.5.3/cc1plus
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* http://www.gentoo.org/doc/en/gcc-upgrading.xml
* Messages for package sys-apps/man-pages-3.35:
* If you don't have a makewhatis cronjob, then you
* should update the whatis database yourself:
* # makewhatis -u
* Messages for package sys-libs/pam-1.1.5:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-auth/pambase-20101024-r2:
* Starting from version 20080801, pambase optionally enables
* SHA512-hashed passwords. For this to work, you need sys-libs/pam-1.0.1
* built against sys-libs/glibc-2.7 or later.
* If you don't have support for this, it will automatically fallback
* to MD5-hashed passwords, just like before.
*
* Please note that the change only affects the newly-changed passwords
* and that SHA512-hashed passwords will not work on earlier versions
* of glibc or Linux-PAM.
* Messages for package sys-apps/busybox-1.19.3-r1:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.19.3-r1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.19.3-r1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* This ebuild has support for user defined configs
* Please read this ebuild for more details and re-emerge as needed
* if you want to add or remove functionality for busybox
* Messages for package net-misc/openssh-5.8_p1-r1:
* Starting with openssh-5.8p1, the server will default to a newer key
* algorithm (ECDSA). You are encouraged to manually update your stored
* keys list as servers update theirs. See ssh-keyscan(1) for more info.
* Remember to merge your config files in /etc/ssh/ and then
* reload sshd: '/etc/init.d/sshd reload'.
* Please be aware users need a valid shell in /etc/passwd
* in order to be allowed to login.
* Messages for package sys-apps/openrc-0.9.8.4:
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
*
* Please read the migration guide available at:
* http://www.gentoo.org/doc/en/openrc-migration.xml
removing /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120320/tmp/chroot-functions.sh from the chroot
--- Running action sequence: preclean
copying stage3-preclean-chroot.sh to /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120320/tmp/
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120320/tmp/
Running stage3-preclean-chroot.sh in chroot /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120320/
>>> Regenerating /etc/ld.so.cache...
emerge --depclean --with-bdeps=n
!!! CONFIG_PROTECT is empty
* Depclean may break link level dependencies. Thus, it is
* recommended to use a tool such as `revdep-rebuild` (from
* app-portage/gentoolkit) in order to detect such breakage.
*
* Always study the list of packages to be cleaned for any obvious
* mistakes. Packages that are part of the world set will always
* be kept. They can be manually added to this set with
* `emerge --noreplace <atom>`. Packages that are listed in
* package.provided (see portage(5)) will be removed by
* depclean, even if they are part of the world set.
*
* As a safety measure, depclean will not remove any packages
* unless *all* required dependencies have been resolved. As a
* consequence, it is often necessary to run `emerge --update
* --newuse --deep @world` prior to depclean.
!!! You have no world file.
!!! Proceeding is likely to break your installation.
Calculating dependencies \b\b... done!
* Dependencies could not be completely resolved due to
* the following required packages not being installed:
*
* >=sys-libs/ncurses-5.2[unicode] pulled in by:
* app-editors/nano-2.2.5
*
* Have you forgotten to do a complete update prior to depclean? The
* most comprehensive command for this purpose is as follows:
*
* emerge --update --newuse --deep --with-bdeps=y @world
*
* Note that the --with-bdeps=y option is not required in many
* situations. Refer to the emerge manual page (run `man emerge`)
* for more information about --with-bdeps.
*
* Also, note that it may be necessary to manually uninstall
* packages that no longer exist in the portage tree, since it may
* not be possible to satisfy their dependencies.
* IMPORTANT: 2 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
!!! catalyst: preclean script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1167, in preclean
" preclean","preclean script failed.",env=self.env)
File "/usr/lib64/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Build failed, could not execute preclean
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1172, in preclean
raise CatalystError, "Build failed, could not execute preclean"
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120320/.catalyst_lock'
Full build log at /tmp/catalyst-auto.1912/log/hardened_stage3.log
^ permalink raw reply [flat|nested] 24+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - hardened/stage3.spec
@ 2012-03-14 11:55 catalyst
0 siblings, 0 replies; 24+ messages in thread
From: catalyst @ 2012-03-14 11:55 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*
* mount options for directory /dev are no longer
* set in /etc/udev/udev.conf, but in /etc/fstab
* as for other directories.
*
* If you use /dev/md/*, /dev/loop/* or /dev/rd/*,
* then please migrate over to using the device names
* /dev/md*, /dev/loop* and /dev/ram*.
* The devfs-compat rules have been removed.
* For reference see Bug #269359.
*
* Rules for /dev/hd* devices have been removed
* Please migrate to libata.
*
* For more information on udev on Gentoo, writing udev rules, and
* fixing known issues visit:
* http://www.gentoo.org/doc/en/udev-guide.xml
* Messages for package sys-apps/coreutils-8.14:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package net-misc/wget-1.12-r3:
* The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
* Messages for package sys-fs/e2fsprogs-1.42:
* No /etc/mtab file, creating one temporarily
* Messages for package sys-devel/gcc-4.5.3-r2:
* PT PaX marking -r
* /var/tmp/portage/sys-devel/gcc-4.5.3-r2/image//usr/libexec/gcc/i686-pc-linux-gnu/4.5.3/cc1
* PT PaX marking -r
* /var/tmp/portage/sys-devel/gcc-4.5.3-r2/image//usr/libexec/gcc/i686-pc-linux-gnu/4.5.3/cc1plus
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* http://www.gentoo.org/doc/en/gcc-upgrading.xml
* Messages for package sys-apps/man-pages-3.35:
* If you don't have a makewhatis cronjob, then you
* should update the whatis database yourself:
* # makewhatis -u
* Messages for package sys-libs/pam-1.1.5:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-auth/pambase-20101024-r2:
* Starting from version 20080801, pambase optionally enables
* SHA512-hashed passwords. For this to work, you need sys-libs/pam-1.0.1
* built against sys-libs/glibc-2.7 or later.
* If you don't have support for this, it will automatically fallback
* to MD5-hashed passwords, just like before.
*
* Please note that the change only affects the newly-changed passwords
* and that SHA512-hashed passwords will not work on earlier versions
* of glibc or Linux-PAM.
* Messages for package sys-apps/busybox-1.19.3-r1:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.19.3-r1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.19.3-r1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* This ebuild has support for user defined configs
* Please read this ebuild for more details and re-emerge as needed
* if you want to add or remove functionality for busybox
* Messages for package net-misc/openssh-5.8_p1-r1:
* Starting with openssh-5.8p1, the server will default to a newer key
* algorithm (ECDSA). You are encouraged to manually update your stored
* keys list as servers update theirs. See ssh-keyscan(1) for more info.
* Remember to merge your config files in /etc/ssh/ and then
* reload sshd: '/etc/init.d/sshd reload'.
* Please be aware users need a valid shell in /etc/passwd
* in order to be allowed to login.
* Messages for package sys-apps/openrc-0.9.8.4:
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
*
* Please read the migration guide available at:
* http://www.gentoo.org/doc/en/openrc-migration.xml
removing /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120313/tmp/chroot-functions.sh from the chroot
--- Running action sequence: preclean
copying stage3-preclean-chroot.sh to /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120313/tmp/
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120313/tmp/
Running stage3-preclean-chroot.sh in chroot /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120313/
>>> Regenerating /etc/ld.so.cache...
emerge --depclean --with-bdeps=n
!!! CONFIG_PROTECT is empty
* Depclean may break link level dependencies. Thus, it is
* recommended to use a tool such as `revdep-rebuild` (from
* app-portage/gentoolkit) in order to detect such breakage.
*
* Always study the list of packages to be cleaned for any obvious
* mistakes. Packages that are part of the world set will always
* be kept. They can be manually added to this set with
* `emerge --noreplace <atom>`. Packages that are listed in
* package.provided (see portage(5)) will be removed by
* depclean, even if they are part of the world set.
*
* As a safety measure, depclean will not remove any packages
* unless *all* required dependencies have been resolved. As a
* consequence, it is often necessary to run `emerge --update
* --newuse --deep @world` prior to depclean.
!!! You have no world file.
!!! Proceeding is likely to break your installation.
Calculating dependencies \b\b... done!
* Dependencies could not be completely resolved due to
* the following required packages not being installed:
*
* >=sys-libs/ncurses-5.2[unicode] pulled in by:
* app-editors/nano-2.2.5
*
* Have you forgotten to do a complete update prior to depclean? The
* most comprehensive command for this purpose is as follows:
*
* emerge --update --newuse --deep --with-bdeps=y @world
*
* Note that the --with-bdeps=y option is not required in many
* situations. Refer to the emerge manual page (run `man emerge`)
* for more information about --with-bdeps.
*
* Also, note that it may be necessary to manually uninstall
* packages that no longer exist in the portage tree, since it may
* not be possible to satisfy their dependencies.
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
!!! catalyst: preclean script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1167, in preclean
" preclean","preclean script failed.",env=self.env)
File "/usr/lib64/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Build failed, could not execute preclean
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1172, in preclean
raise CatalystError, "Build failed, could not execute preclean"
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120313/.catalyst_lock'
Full build log at /tmp/catalyst-auto.21872/log/hardened_stage3.log
^ permalink raw reply [flat|nested] 24+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - hardened/stage3.spec
@ 2012-03-07 14:50 catalyst
0 siblings, 0 replies; 24+ messages in thread
From: catalyst @ 2012-03-07 14:50 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*
* mount options for directory /dev are no longer
* set in /etc/udev/udev.conf, but in /etc/fstab
* as for other directories.
*
* If you use /dev/md/*, /dev/loop/* or /dev/rd/*,
* then please migrate over to using the device names
* /dev/md*, /dev/loop* and /dev/ram*.
* The devfs-compat rules have been removed.
* For reference see Bug #269359.
*
* Rules for /dev/hd* devices have been removed
* Please migrate to libata.
*
* For more information on udev on Gentoo, writing udev rules, and
* fixing known issues visit:
* http://www.gentoo.org/doc/en/udev-guide.xml
* Messages for package sys-apps/coreutils-8.14:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package net-misc/wget-1.12-r3:
* The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
* Messages for package sys-fs/e2fsprogs-1.42:
* No /etc/mtab file, creating one temporarily
* Messages for package sys-devel/gcc-4.5.3-r2:
* PT PaX marking -r
* /var/tmp/portage/sys-devel/gcc-4.5.3-r2/image//usr/libexec/gcc/i686-pc-linux-gnu/4.5.3/cc1
* PT PaX marking -r
* /var/tmp/portage/sys-devel/gcc-4.5.3-r2/image//usr/libexec/gcc/i686-pc-linux-gnu/4.5.3/cc1plus
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* http://www.gentoo.org/doc/en/gcc-upgrading.xml
* Messages for package sys-apps/man-pages-3.35:
* If you don't have a makewhatis cronjob, then you
* should update the whatis database yourself:
* # makewhatis -u
* Messages for package sys-libs/pam-1.1.5:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-auth/pambase-20101024-r2:
* Starting from version 20080801, pambase optionally enables
* SHA512-hashed passwords. For this to work, you need sys-libs/pam-1.0.1
* built against sys-libs/glibc-2.7 or later.
* If you don't have support for this, it will automatically fallback
* to MD5-hashed passwords, just like before.
*
* Please note that the change only affects the newly-changed passwords
* and that SHA512-hashed passwords will not work on earlier versions
* of glibc or Linux-PAM.
* Messages for package sys-apps/busybox-1.19.3-r1:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.19.3-r1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.19.3-r1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* This ebuild has support for user defined configs
* Please read this ebuild for more details and re-emerge as needed
* if you want to add or remove functionality for busybox
* Messages for package net-misc/openssh-5.8_p1-r1:
* Starting with openssh-5.8p1, the server will default to a newer key
* algorithm (ECDSA). You are encouraged to manually update your stored
* keys list as servers update theirs. See ssh-keyscan(1) for more info.
* Remember to merge your config files in /etc/ssh/ and then
* reload sshd: '/etc/init.d/sshd reload'.
* Please be aware users need a valid shell in /etc/passwd
* in order to be allowed to login.
* Messages for package sys-apps/openrc-0.9.8.4:
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
*
* Please read the migration guide available at:
* http://www.gentoo.org/doc/en/openrc-migration.xml
removing /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120306/tmp/chroot-functions.sh from the chroot
--- Running action sequence: preclean
copying stage3-preclean-chroot.sh to /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120306/tmp/
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120306/tmp/
Running stage3-preclean-chroot.sh in chroot /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120306/
>>> Regenerating /etc/ld.so.cache...
emerge --depclean --with-bdeps=n
!!! CONFIG_PROTECT is empty
* Depclean may break link level dependencies. Thus, it is
* recommended to use a tool such as `revdep-rebuild` (from
* app-portage/gentoolkit) in order to detect such breakage.
*
* Always study the list of packages to be cleaned for any obvious
* mistakes. Packages that are part of the world set will always
* be kept. They can be manually added to this set with
* `emerge --noreplace <atom>`. Packages that are listed in
* package.provided (see portage(5)) will be removed by
* depclean, even if they are part of the world set.
*
* As a safety measure, depclean will not remove any packages
* unless *all* required dependencies have been resolved. As a
* consequence, it is often necessary to run `emerge --update
* --newuse --deep @world` prior to depclean.
!!! You have no world file.
!!! Proceeding is likely to break your installation.
Calculating dependencies \b\b... done!
* Dependencies could not be completely resolved due to
* the following required packages not being installed:
*
* >=sys-libs/ncurses-5.2[unicode] pulled in by:
* app-editors/nano-2.2.5
*
* Have you forgotten to do a complete update prior to depclean? The
* most comprehensive command for this purpose is as follows:
*
* emerge --update --newuse --deep --with-bdeps=y @world
*
* Note that the --with-bdeps=y option is not required in many
* situations. Refer to the emerge manual page (run `man emerge`)
* for more information about --with-bdeps.
*
* Also, note that it may be necessary to manually uninstall
* packages that no longer exist in the portage tree, since it may
* not be possible to satisfy their dependencies.
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
!!! catalyst: preclean script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1167, in preclean
" preclean","preclean script failed.",env=self.env)
File "/usr/lib64/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Build failed, could not execute preclean
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1172, in preclean
raise CatalystError, "Build failed, could not execute preclean"
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120306/.catalyst_lock'
Full build log at /tmp/catalyst-auto.20159/log/hardened_stage3.log
^ permalink raw reply [flat|nested] 24+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - hardened/stage3.spec
@ 2012-02-29 14:29 catalyst
0 siblings, 0 replies; 24+ messages in thread
From: catalyst @ 2012-02-29 14:29 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* This may however number your devices in a different way than they are now.
*
* If you build an initramfs including udev, then please
* make sure that the /sbin/udevadm binary gets included,
* and your scripts changed to use it,as it replaces the
* old helper apps udevinfo, udevtrigger, ...
*
* mount options for directory /dev are no longer
* set in /etc/udev/udev.conf, but in /etc/fstab
* as for other directories.
*
* If you use /dev/md/*, /dev/loop/* or /dev/rd/*,
* then please migrate over to using the device names
* /dev/md*, /dev/loop* and /dev/ram*.
* The devfs-compat rules have been removed.
* For reference see Bug #269359.
*
* Rules for /dev/hd* devices have been removed
* Please migrate to libata.
*
* For more information on udev on Gentoo, writing udev rules, and
* fixing known issues visit:
* http://www.gentoo.org/doc/en/udev-guide.xml
* Messages for package sys-apps/coreutils-8.14:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package net-misc/wget-1.12-r3:
* The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
* Messages for package sys-fs/e2fsprogs-1.42:
* No /etc/mtab file, creating one temporarily
* Messages for package sys-devel/gcc-4.5.3-r2:
* PT PaX marking -r
* /var/tmp/portage/sys-devel/gcc-4.5.3-r2/image//usr/libexec/gcc/i686-pc-linux-gnu/4.5.3/cc1
* PT PaX marking -r
* /var/tmp/portage/sys-devel/gcc-4.5.3-r2/image//usr/libexec/gcc/i686-pc-linux-gnu/4.5.3/cc1plus
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* http://www.gentoo.org/doc/en/gcc-upgrading.xml
* Messages for package sys-libs/pam-1.1.5:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-auth/pambase-20101024-r2:
* Starting from version 20080801, pambase optionally enables
* SHA512-hashed passwords. For this to work, you need sys-libs/pam-1.0.1
* built against sys-libs/glibc-2.7 or later.
* If you don't have support for this, it will automatically fallback
* to MD5-hashed passwords, just like before.
*
* Please note that the change only affects the newly-changed passwords
* and that SHA512-hashed passwords will not work on earlier versions
* of glibc or Linux-PAM.
* Messages for package sys-apps/busybox-1.19.3-r1:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.19.3-r1 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.19.3-r1 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* This ebuild has support for user defined configs
* Please read this ebuild for more details and re-emerge as needed
* if you want to add or remove functionality for busybox
* Messages for package net-misc/openssh-5.8_p1-r1:
* Starting with openssh-5.8p1, the server will default to a newer key
* algorithm (ECDSA). You are encouraged to manually update your stored
* keys list as servers update theirs. See ssh-keyscan(1) for more info.
* Remember to merge your config files in /etc/ssh/ and then
* reload sshd: '/etc/init.d/sshd reload'.
* Please be aware users need a valid shell in /etc/passwd
* in order to be allowed to login.
* Messages for package sys-apps/openrc-0.9.8.4:
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
*
* Please read the migration guide available at:
* http://www.gentoo.org/doc/en/openrc-migration.xml
removing /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120228/tmp/chroot-functions.sh from the chroot
--- Running action sequence: preclean
copying stage3-preclean-chroot.sh to /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120228/tmp/
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120228/tmp/
Running stage3-preclean-chroot.sh in chroot /release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120228/
>>> Regenerating /etc/ld.so.cache...
emerge --depclean --with-bdeps=n
!!! CONFIG_PROTECT is empty
* Depclean may break link level dependencies. Thus, it is
* recommended to use a tool such as `revdep-rebuild` (from
* app-portage/gentoolkit) in order to detect such breakage.
*
* Always study the list of packages to be cleaned for any obvious
* mistakes. Packages that are part of the world set will always
* be kept. They can be manually added to this set with
* `emerge --noreplace <atom>`. Packages that are listed in
* package.provided (see portage(5)) will be removed by
* depclean, even if they are part of the world set.
*
* As a safety measure, depclean will not remove any packages
* unless *all* required dependencies have been resolved. As a
* consequence, it is often necessary to run `emerge --update
* --newuse --deep @world` prior to depclean.
!!! You have no world file.
!!! Proceeding is likely to break your installation.
Calculating dependencies \b\b... done!
* Dependencies could not be completely resolved due to
* the following required packages not being installed:
*
* >=sys-libs/ncurses-5.2[unicode] pulled in by:
* app-editors/nano-2.2.5
*
* Have you forgotten to do a complete update prior to depclean? The
* most comprehensive command for this purpose is as follows:
*
* emerge --update --newuse --deep --with-bdeps=y @world
*
* Note that the --with-bdeps=y option is not required in many
* situations. Refer to the emerge manual page (run `man emerge`)
* for more information about --with-bdeps.
*
* Also, note that it may be necessary to manually uninstall
* packages that no longer exist in the portage tree, since it may
* not be possible to satisfy their dependencies.
* IMPORTANT: 2 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
!!! catalyst: preclean script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1167, in preclean
" preclean","preclean script failed.",env=self.env)
File "/usr/lib64/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Build failed, could not execute preclean
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1172, in preclean
raise CatalystError, "Build failed, could not execute preclean"
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20120228/.catalyst_lock'
Full build log at /tmp/catalyst-auto.4101/log/hardened_stage3.log
^ permalink raw reply [flat|nested] 24+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - hardened/stage3.spec
@ 2011-05-11 0:32 catalyst
0 siblings, 0 replies; 24+ messages in thread
From: catalyst @ 2011-05-11 0:32 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Installing (113 of 135) sys-devel/automake-1.11.1
>>> Emerging (114 of 135) sys-apps/groff-1.21
>>> Installing (114 of 135) sys-apps/groff-1.21
>>> Emerging (115 of 135) sys-apps/man-1.6f-r4
>>> Failed to emerge sys-apps/man-1.6f-r4, Log file:
>>> '/var/tmp/portage/sys-apps/man-1.6f-r4/temp/build.log'
* Package: sys-apps/man-1.6f-r4
* Repository: gentoo
* Maintainer: base-system@gentoo.org
* USE: elibc_glibc kernel_linux nls userland_GNU x86
* FEATURES: sandbox
* Adding group 'man' to your system ...
* - Groupid: 15
/usr/portage/eclass/eutils.eclass: line 860: groupadd: command not found
* ERROR: sys-apps/man-1.6f-r4 failed (setup phase):
* enewgroup failed
*
* Call stack:
* ebuild.sh, line 56: Called pkg_setup
* man-1.6f-r4.ebuild, line 24: Called enewgroup 'man' '15'
* eutils.eclass, line 860: Called die
* The specific snippet of code:
* groupadd -r ${opts} ${egroup} || die "enewgroup failed"
*
* If you need support, post the output of 'emerge --info =sys-apps/man-1.6f-r4',
* the complete build log and the output of 'emerge -pqv =sys-apps/man-1.6f-r4'.
* The complete build log is located at '/var/tmp/portage/sys-apps/man-1.6f-r4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/man-1.6f-r4/temp/die.env'.
* S: '/var/tmp/portage/sys-apps/man-1.6f-r4/work/man-1.6f'
* Messages for package sys-libs/timezone-data-2011e:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package app-portage/portage-utils-0.3.1:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package sys-libs/glibc-2.11.3:
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-libs/gdbm-1.8.3-r4:
* 32bit systems might have to rebuild all gdbm databases due to
* LFS changes in the gdbm format. You can either delete the db
* and regenerate it from scratch, or use the converter:
* http://bugs.gentoo.org/attachment.cgi?id=215326
*
* See this comment for information on how to use it:
* http://bugs.gentoo.org/299390#c15
*
* You should be able to locate most gdbm db's on your system with:
* find /etc /var -type f -exec file {} + | grep 'GNU dbm 1.x or ndbm database'
*
* You could also try using this helper script:
* http://bugs.gentoo.org/attachment.cgi?id=222581
* Messages for package sys-fs/udev-151-r4:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* CONFIG_SYSFS_DEPRECATED: should not be set. But it is.
* CONFIG_SYSFS_DEPRECATED_V2: should not be set. But it is.
* Please check to make sure these options are set correctly.
* Failure to do so may cause unexpected problems.
*
* udev-151 does not support Linux kernel before version 2.6.25!
* For a reliable udev, use at least kernel 2.6.27
*
* You need to add the udev init script to the runlevel sysinit,
* else your system will not be able to boot
* after updating to >=openrc-0.4.0
* Run this to enable udev for >=openrc-0.4.0:
* rc-update add udev sysinit
*
* Auto-adding 'udev-postmount' service to your default runlevel
*
* If after the udev update removable devices or CD/DVD drives
* stop working, try re-emerging HAL before filling a bug report
*
* persistent-net does assigning fixed names to network devices.
* If you have problems with the persistent-net rules,
* just delete the rules file
* rm /etc/udev/rules.d/70-persistent-net.rules
* and then reboot.
*
* This may however number your devices in a different way than they are now.
*
* If you build an initramfs including udev, then please
* make sure that the /sbin/udevadm binary gets included,
* and your scripts changed to use it,as it replaces the
* old helper apps udevinfo, udevtrigger, ...
*
* mount options for directory /dev are no longer
* set in /etc/udev/udev.conf, but in /etc/fstab
* as for other directories.
*
* This version of udev no longer has devfs-compat enabled
* If you use /dev/md/*, /dev/loop/* or /dev/rd/*,
* then please migrate over to using the device names
* /dev/md*, /dev/loop* and /dev/ram*.
* The devfs-compat rules will be removed on the next udev update.
* For reference see Bug #269359.
*
* This version of udev no longer has use flag old-hd-rules enabled
* So all special rules for /dev/hd* devices are missing
* Please migrate to the new libata if you need these rules.
* They will be completely removed on the next udev update.
*
* For more information on udev on Gentoo, writing udev rules, and
* fixing known issues visit:
* http://www.gentoo.org/doc/en/udev-guide.xml
* Messages for package sys-apps/portage-2.1.9.42:
* If you are an ebuild developer and you plan to commit ebuilds
* with this system then please install dev-python/pycrypto or
* enable the ssl USE flag for >=dev-lang/python-2.6 in order
* to enable RMD160 hash support.
* See bug #198398 for more information.
* Messages for package app-misc/ca-certificates-20090709:
* You should run update-ca-certificates manually after etc-update
* Messages for package dev-vcs/git-1.7.3.4-r1:
* These additional scripts need some dependencies:
* git-quiltimport : dev-util/quilt
* git-instaweb : || ( www-servers/lighttpd www-servers/apache )
* Messages for package sys-apps/coreutils-8.7:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package net-misc/wget-1.12-r3:
* The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
* Messages for package sys-fs/e2fsprogs-1.41.12:
* No /etc/mtab file, creating one temporarily
* Messages for package sys-apps/man-1.6f-r4:
* ERROR: sys-apps/man-1.6f-r4 failed (setup phase):
* enewgroup failed
*
* Call stack:
* ebuild.sh, line 56: Called pkg_setup
* man-1.6f-r4.ebuild, line 24: Called enewgroup 'man' '15'
* eutils.eclass, line 860: Called die
* The specific snippet of code:
* groupadd -r ${opts} ${egroup} || die "enewgroup failed"
*
* If you need support, post the output of 'emerge --info =sys-apps/man-1.6f-r4',
* the complete build log and the output of 'emerge -pqv =sys-apps/man-1.6f-r4'.
* The complete build log is located at '/var/tmp/portage/sys-apps/man-1.6f-r4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/man-1.6f-r4/temp/die.env'.
* S: '/var/tmp/portage/sys-apps/man-1.6f-r4/work/man-1.6f'
* Regenerating GNU info directory index...
* Processed 74 info files.
* IMPORTANT: 2 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1207, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1212, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/hardened/stage3-i686-hardened-20110510/.catalyst_lock'
Full build log at /tmp/catalyst-auto.4221/log/hardened_stage3.log
^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2020-12-15 13:05 UTC | newest]
Thread overview: 24+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-12-20 11:09 [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - hardened/stage3.spec catalyst
-- strict thread matches above, loose matches on Subject: below --
2020-12-15 13:05 catalyst
2020-05-13 16:30 catalyst
2020-03-17 17:04 catalyst
2018-04-18 6:32 catalyst
2018-04-11 6:33 catalyst
2018-04-04 6:33 catalyst
2017-12-28 4:11 catalyst
2017-12-27 11:15 catalyst
2015-11-25 11:11 catalyst
2015-06-24 10:51 catalyst
2015-03-18 11:03 catalyst
2015-01-07 9:30 catalyst
2014-12-24 8:34 catalyst
2014-06-08 12:22 catalyst
2012-04-18 12:53 catalyst
2012-04-11 12:59 catalyst
2012-04-04 12:53 catalyst
2012-03-28 12:48 catalyst
2012-03-21 12:09 catalyst
2012-03-14 11:55 catalyst
2012-03-07 14:50 catalyst
2012-02-29 14:29 catalyst
2011-05-11 0:32 catalyst
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox