27 Sep 2017 03:00:45 UTC: NOTICE : --- Running action sequence: setup_environment 27 Sep 2017 03:00:45 UTC: NOTICE : --- Running action sequence: run_local copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i486-20170927/tmp/stage1root/etc/portage Copying stage1-chroot.sh to /tmp copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i486-20170927/tmp copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i486-20170927/tmp Ensure the file has the executable bit set Running stage1-chroot.sh in chroot: setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i486-20170927 /tmp/stage1-chroot.sh >>> Regenerating /etc/ld.so.cache... Adding USE="${USE} build" to make.conf for portage build emerge --quiet --oneshot --update --newuse sys-apps/portage Performing Global Updates (Could take a couple of minutes if you have a lot of binary packages.) !!! The following installed packages are masked: - sys-devel/binutils-2.28-r2::gentoo (masked by: package.mask) /usr/portage/profiles/package.mask: # Michał Górny , Andreas K. Hüttel , # Matthias Maier (21 May 2017) # These old versions of toolchain packages (binutils, gcc, glibc) are no # longer officially supported and are not suitable for general use. Using # these packages can result in build failures (and possible breakage) for # many packages, and may leave your system vulnerable to known security # exploits. # If you still use one of these old toolchain packages, please upgrade (and # switch the compiler / the binutils) ASAP. If you need them for a specific # (isolated) use case, feel free to unmask them on your system. For more information, see the MASKED PACKAGES section in the emerge man page or refer to the Gentoo Handbook. >>> Verifying ebuild manifests >>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo >>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo Updating seed stage... emerge --quiet --buildpkg=n --update --deep @world >>> Verifying ebuild manifests >>> Emerging (1 of 8) sys-apps/file-5.32::gentoo >>> Installing (1 of 8) sys-apps/file-5.32::gentoo >>> Emerging (2 of 8) sys-devel/binutils-2.28.1::gentoo >>> Installing (2 of 8) sys-devel/binutils-2.28.1::gentoo >>> Emerging (3 of 8) virtual/perl-Test-Harness-3.360.100_rc-r2::gentoo >>> Installing (3 of 8) virtual/perl-Test-Harness-3.360.100_rc-r2::gentoo >>> Emerging (4 of 8) virtual/perl-File-Spec-3.630.100_rc-r2::gentoo >>> Installing (4 of 8) virtual/perl-File-Spec-3.630.100_rc-r2::gentoo >>> Emerging (5 of 8) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r2::gentoo >>> Installing (5 of 8) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r2::gentoo >>> Emerging (6 of 8) virtual/perl-JSON-PP-2.273.0.100_rc-r4::gentoo >>> Installing (6 of 8) virtual/perl-JSON-PP-2.273.0.100_rc-r4::gentoo >>> Emerging (7 of 8) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r2::gentoo >>> Installing (7 of 8) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r2::gentoo >>> Emerging (8 of 8) sys-apps/help2man-1.47.4::gentoo >>> Installing (8 of 8) sys-apps/help2man-1.47.4::gentoo emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout >>> Verifying ebuild manifests >>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/ >>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/ * Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/: * Initializing /tmp/stage1root/lib as a dir * Initializing /tmp/stage1root/usr/lib as a dir * Initializing /tmp/stage1root/usr/local/lib as a dir * You should reboot the system now to get /run mounted with tmpfs! emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/flex virtual/shadow sys-apps/diffutils sys-devel/gettext net-misc/wget sys-devel/gcc virtual/os-headers app-arch/gzip sys-devel/autoconf app-arch/bzip2 sys-apps/makedev sys-apps/less virtual/editor sys-apps/grep sys-devel/bison virtual/package-manager app-arch/tar sys-devel/make app-arch/xz-utils virtual/pkgconfig app-shells/bash:0 sys-apps/net-tools sys-apps/which sys-devel/patch sys-apps/findutils sys-devel/binutils sys-devel/libtool sys-apps/file sys-devel/automake sys-apps/coreutils virtual/libc net-misc/rsync sys-apps/gawk sys-devel/gnuconfig sys-apps/baselayout sys-apps/sed [ebuild rR ] app-arch/bzip2-1.0.6-r8 [1.0.6-r8] [ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/ [ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/ [ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/ [ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/ [ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/ [ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/ [ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/ [ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/ [ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/ [ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/ [ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/ [ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/ [ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/ [ebuild N ] sys-devel/make-4.2.1 to /tmp/stage1root/ [ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/ [ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/ [ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/ [ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/ [ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/ [ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/ [ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/ [ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/ [ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/ [ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/ [ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/ [ebuild N ] sys-apps/diffutils-3.5 to /tmp/stage1root/ [ebuild N ] sys-apps/less-487 to /tmp/stage1root/ [ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/ [ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/ [ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/ [ebuild rR ] sys-libs/zlib-1.2.11 [1.2.11] [ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/ [ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/ [ebuild N ] app-arch/xz-utils-5.2.3 to /tmp/stage1root/ [ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/ [ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/ [ebuild N ] sys-apps/shadow-4.5 to /tmp/stage1root/ [ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/ [ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/ [ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/ [ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/ [ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/ [ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/ [ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/ [ebuild N ] virtual/shadow-0 to /tmp/stage1root/ [ebuild N ] sys-devel/binutils-2.28.1 to /tmp/stage1root/ [ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/ [ebuild N ] dev-libs/mpc-1.0.2-r1 to /tmp/stage1root/ [ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/ [ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/ [ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/ [ebuild N ] virtual/os-headers-0 to /tmp/stage1root/ [ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/ [ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/ [ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/ [ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/ [ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/ [ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r2 to /tmp/stage1root/ [ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/ [ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/ [ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/ [ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/ [ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/ [ebuild N ] sys-devel/automake-1.15-r2 to /tmp/stage1root/ [ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/ [ebuild N ] sys-libs/glibc-2.23-r4 to /tmp/stage1root/ [ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/ [ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/ [ebuild N ] app-editors/nano-2.7.5 to /tmp/stage1root/ [ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/ [ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/ [ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/ [ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/ [ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/ [ebuild N ] sys-devel/gcc-5.4.0-r3 to /tmp/stage1root/ [ebuild N ] virtual/editor-0 to /tmp/stage1root/ [ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/ [ebuild N ] virtual/package-manager-0 to /tmp/stage1root/ [ebuild N ] virtual/libc-1 to /tmp/stage1root/ [ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/ [ebuild N ] dev-libs/libxml2-2.9.4-r3 to /tmp/stage1root/ [ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/ !!! Multiple package instances within a single package slot have been pulled !!! into the dependency graph, resulting in a slot conflict: sys-libs/zlib:0 (sys-libs/zlib-1.2.11:0/1::gentoo, ebuild scheduled for merge) pulled in by (no parents that aren't satisfied by other packages in this slot) (sys-libs/zlib-1.2.11:0/0::gentoo, installed) pulled in by >=sys-libs/zlib-1.1.3:0/0= required by (dev-lang/python-3.4.5:3.4/3.4m::gentoo, installed) ^^^^^ (and 3 more with the same problem) app-arch/bzip2:0 (app-arch/bzip2-1.0.6-r8:0/1::gentoo, ebuild scheduled for merge) pulled in by (no parents that aren't satisfied by other packages in this slot) (app-arch/bzip2-1.0.6-r8:0/0::gentoo, installed) pulled in by app-arch/bzip2:0/0= required by (dev-lang/python-3.4.5:3.4/3.4m::gentoo, installed) ^^^^^ (and 1 more with the same problem) NOTE: Use the '--verbose-conflicts' option to display parents omitted above 27 Sep 2017 03:05:53 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1 27 Sep 2017 03:05:54 UTC: ERROR : CatalystError: Stage build aborting due to error. 27 Sep 2017 03:05:54 UTC: ERROR : Exception running action sequence run_local Traceback (most recent call last): File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1312, in run_local env=self.env) File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd print_traceback=False) catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1 During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1412, in run getattr(self, x)() File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1321, in run_local print_traceback=False) catalyst.support.CatalystError: Stage build aborting due to error. 27 Sep 2017 03:05:54 UTC: NOTICE : Cleaning up... Running unbind() Command exited with non-zero status 2 388.85user 51.32system 5:28.79elapsed 133%CPU (0avgtext+0avgdata 345984maxresident)k 6280inputs+4377712outputs (0major+27875627minor)pagefaults 0swaps Full build log at /home/release/tmp/run/catalyst-auto.20170927.e8Ed0C/log/stage1.log