>>> Regenerating /etc/ld.so.cache... Adding USE=' build' to make.conf for portage build emerge --quiet --oneshot --update --newuse sys-apps/portage Performing Global Updates (Could take a couple of minutes if you have a lot of binary packages.) Updating seed stage... emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc !!! The following installed packages are masked: - sys-libs/glibc-2.23-r3::gentoo (masked by: package.mask) /usr/portage/profiles/package.mask: # Michał Górny , Andreas K. Hüttel , # Matthias Maier (21 May 2017) # These old versions of toolchain packages (binutils, gcc, glibc) are no # longer officially supported and are not suitable for general use. Using # these packages can result in build failures (and possible breakage) for # many packages, and may leave your system vulnerable to known security # exploits. # # If you still use one of these old toolchain packages, please upgrade (and # in case of gcc switch the compiler) ASAP. If you need them for a specific # (isolated) use case, feel free to unmask them on your system. For more information, see the MASKED PACKAGES section in the emerge man page or refer to the Gentoo Handbook. >>> Recording sys-devel/gcc in "world" favorites file... emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout >>> Verifying ebuild manifests >>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/ >>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/ * Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/: * Initializing /tmp/stage1root/lib as a dir * Initializing /tmp/stage1root/usr/lib as a dir * Initializing /tmp/stage1root/usr/local/lib as a dir * You should reboot the system now to get /run mounted with tmpfs! emerge --quiet --usepkg --buildpkg --newuse --oneshot virtual/editor app-arch/bzip2 sys-apps/diffutils sys-devel/gettext sys-devel/make sys-devel/patch sys-apps/sed virtual/shadow sys-devel/binutils net-misc/wget sys-devel/flex sys-apps/coreutils virtual/os-headers sys-apps/grep app-shells/bash:0 sys-apps/findutils sys-apps/baselayout sys-devel/gcc sys-apps/which sys-apps/net-tools sys-devel/gnuconfig app-arch/gzip sys-apps/makedev sys-apps/gawk net-misc/rsync virtual/package-manager virtual/pkgconfig virtual/libc sys-devel/automake sys-devel/bison sys-apps/file sys-apps/less app-arch/xz-utils sys-devel/autoconf sys-devel/libtool app-arch/tar [ebuild U ] sys-libs/glibc-2.24-r3 [2.23-r3] [ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/ [ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/ [ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/ [ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/ [ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/ [ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/ [ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/ [ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/ [ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/ [ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/ [ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/ [ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/ [ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/ [ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/ [ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/ [ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/ [ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/ [ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/ [ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/ [ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/ [ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/ [ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/ [ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/ [ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/ [ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/ [ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/ [ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/ [ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/ [ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/ [ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/ [ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/ [ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/ [ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/ [ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/ [ebuild N ] sys-apps/less-487 to /tmp/stage1root/ [ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/ [ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/ [ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/ [ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/ [ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/ [ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/ [ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/ [ebuild N ] virtual/shadow-0 to /tmp/stage1root/ [ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/ [ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/ [ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/ [ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/ [ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/ [ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/ [ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/ [ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/ [ebuild N ] virtual/os-headers-0 to /tmp/stage1root/ [ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/ [ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/ [ebuild N ] dev-lang/perl-5.24.2 to /tmp/stage1root/ [ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r1 to /tmp/stage1root/ [ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/ [ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/ [ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/ [ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/ [ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/ [ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/ [ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/ [ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/ [ebuild N ] sys-libs/glibc-2.24-r3 to /tmp/stage1root/ [ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/ [ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/ [ebuild N ] app-editors/nano-2.8.6 to /tmp/stage1root/ [ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/ [ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/ [ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/ [ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/ [ebuild N ] virtual/editor-0 to /tmp/stage1root/ [ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/ [ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/ [ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/ [ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/ [ebuild N ] virtual/package-manager-0 to /tmp/stage1root/ [ebuild N ] virtual/libc-1 to /tmp/stage1root/ [ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/ [ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/ The following keyword changes are necessary to proceed: (see "package.accept_keywords" in the portage(5) man page for more details) # required by virtual/perl-File-Path-2.130.0::gentoo # required by dev-lang/perl-5.24.2::gentoo # required by app-admin/perl-cleaner-2.20::gentoo =perl-core/File-Path-2.130.0 ~s390 # required by dev-lang/perl-5.24.2::gentoo # required by app-admin/perl-cleaner-2.20::gentoo =virtual/perl-Test-Harness-3.360.100_rc-r1 ~s390 # required by app-eselect/eselect-python-20160516::gentoo # required by dev-lang/python-2.7.12::gentoo # required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7] # required by app-admin/perl-cleaner-2.20::gentoo # required by dev-lang/perl-5.24.2::gentoo # required by virtual/perl-File-Temp-0.230.400-r5::gentoo =app-admin/eselect-1.4.9 ~s390 # required by virtual/libc-1::gentoo # required by @system # required by @world (argument) =sys-libs/glibc-2.24-r3 ~s390 # required by dev-lang/perl-5.24.2::gentoo # required by app-admin/perl-cleaner-2.20::gentoo =virtual/perl-File-Path-2.130.0 ~s390 # required by sys-apps/grep (argument) =sys-apps/grep-3.1 ~s390 # required by virtual/perl-Test-Harness-3.360.100_rc-r1::gentoo =dev-lang/perl-5.24.2 ~s390 # required by virtual/libffi-3.0.13-r1::gentoo # required by dev-lang/python-2.7.12::gentoo # required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7] # required by app-admin/perl-cleaner-2.20::gentoo # required by dev-lang/perl-5.24.2::gentoo # required by virtual/perl-File-Temp-0.230.400-r5::gentoo =dev-libs/libffi-3.2.1 ~s390 # required by dev-lang/perl-5.24.2::gentoo # required by app-admin/perl-cleaner-2.20::gentoo =virtual/perl-Data-Dumper-2.160.0-r1 ~s390 # required by sys-devel/gettext (argument) =sys-devel/gettext-0.19.8.1 ~s390 # required by virtual/editor-0::gentoo # required by virtual/editor (argument) =app-editors/nano-2.8.6 ~s390 Use --autounmask-write to write changes to config files (honoring CONFIG_PROTECT). Carefully examine the list of proposed changes, paying special attention to mask or keyword changes that may expose experimental or unstable packages. !!! catalyst: run script failed. Traceback (most recent call last): File "modules/generic_stage_target.py", line 1244, in run_local "run script failed.",env=self.env) File "/usr/lib64/catalyst/modules/catalyst_support.py", line 541, in cmd raise CatalystError,myexc CatalystError None !!! catalyst: Stage build aborting due to error. Traceback (most recent call last): File "/usr/lib64/catalyst/catalyst", line 218, in build_target mytarget.run() File "modules/generic_stage_target.py", line 1304, in run apply(getattr(self,x)) File "modules/generic_stage_target.py", line 1249, in run_local raise CatalystError,"Stage build aborting due to error." CatalystError !!! catalyst: Error encountered during run of target stage1 Catalyst aborting.... lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390x-20170803/.catalyst_lock' Command exited with non-zero status 1 33.86user 5.31system 0:48.38elapsed 80%CPU (0avgtext+0avgdata 276464maxresident)k 0inputs+0outputs (416major+800709minor)pagefaults 0swaps Full build log at /tmp/catalyst-auto.20170803.dszem5/log/stage1.log