From: "root" <vapier@gentoo.org>
To: releng@gentoo.org,gentoo-releng-autobuilds@lists.gentoo.org
Subject: [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec
Date: Thu, 03 Aug 2017 03:15:19 -0400 [thread overview]
Message-ID: <20170803071520.7A1F2334B1@nightheron.gentoo.org> (raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 10865 bytes --]
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390-20170803//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390-20170803/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
!!! The following installed packages are masked:
- sys-libs/glibc-2.23-r3::gentoo (masked by: package.mask)
/usr/portage/profiles/package.mask:
# Michał Górny <mgorny@gentoo.org>, Andreas K. Hüttel <dilfridge@gentoo.org>,
# Matthias Maier <tamiko@gentoo.org> (21 May 2017)
# These old versions of toolchain packages (binutils, gcc, glibc) are no
# longer officially supported and are not suitable for general use. Using
# these packages can result in build failures (and possible breakage) for
# many packages, and may leave your system vulnerable to known security
# exploits.
#
# If you still use one of these old toolchain packages, please upgrade (and
# in case of gcc switch the compiler) ASAP. If you need them for a specific
# (isolated) use case, feel free to unmask them on your system.
For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot net-misc/wget sys-apps/coreutils sys-apps/grep net-misc/rsync sys-devel/libtool app-shells/bash:0 sys-devel/autoconf virtual/editor sys-devel/gnuconfig sys-apps/less sys-apps/makedev sys-devel/make app-arch/xz-utils app-arch/bzip2 sys-apps/net-tools sys-devel/bison sys-apps/which sys-devel/gcc app-arch/tar sys-apps/sed virtual/package-manager app-arch/gzip sys-devel/automake sys-devel/flex sys-apps/diffutils virtual/shadow sys-apps/baselayout sys-devel/patch virtual/pkgconfig sys-devel/gettext sys-apps/gawk sys-apps/file virtual/os-headers virtual/libc sys-devel/binutils sys-apps/findutils
[ebuild U ] sys-libs/glibc-2.24-r3 [2.23-r3]
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.24-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.6 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=app-admin/eselect-1.4.9 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-3.4.5::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python3_4]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-Test-Harness-3.360.100_rc-r1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by virtual/libc-1::gentoo
# required by virtual/libc (argument)
=sys-libs/glibc-2.24-r3 ~s390
# required by virtual/perl-Test-Harness-3.360.100_rc-r1::gentoo
=dev-lang/perl-5.24.2 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Temp-0.230.400-r5::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
# required by virtual/editor-0::gentoo
# required by virtual/editor (argument)
=app-editors/nano-2.8.6 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390-20170803/.catalyst_lock'
Command exited with non-zero status 1
33.96user 6.72system 0:49.79elapsed 81%CPU (0avgtext+0avgdata 169200maxresident)k
0inputs+0outputs (400major+1442758minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170803.2dYGpB/log/stage1.log
next reply other threads:[~2017-08-03 7:15 UTC|newest]
Thread overview: 233+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-03 7:15 root [this message]
-- strict thread matches above, loose matches on Subject: below --
2020-01-08 12:15 [gentoo-releng-autobuilds] [s390-auto] Catalyst fatal build error - stage1.spec root
2019-10-27 7:15 root
2019-10-26 7:15 root
2019-10-04 7:20 root
2019-10-03 7:15 root
2019-10-02 7:14 root
2019-06-03 7:14 root
2018-08-16 7:27 root
2018-08-15 7:27 root
2018-08-14 7:28 root
2018-08-13 7:27 root
2018-08-12 7:27 root
2018-08-11 7:27 root
2018-08-10 7:27 root
2018-08-09 7:54 root
2018-08-08 7:28 root
2018-08-07 7:27 root
2018-08-06 7:27 root
2018-08-05 7:32 root
2018-08-04 7:28 root
2018-08-03 7:27 root
2018-08-02 7:27 root
2018-08-01 7:27 root
2018-07-31 7:49 root
2018-07-30 7:27 root
2018-07-29 7:26 root
2018-07-28 7:28 root
2018-07-27 7:28 root
2018-07-26 7:27 root
2018-05-31 7:15 root
2018-05-30 7:17 root
2018-05-29 7:16 root
2018-05-28 7:15 root
2018-05-27 7:15 root
2018-05-26 7:15 root
2018-05-25 7:15 root
2018-05-22 7:15 root
2018-05-21 7:16 root
2018-05-20 7:23 root
2018-05-19 7:16 root
2018-05-18 7:15 root
2018-05-17 7:15 root
2018-05-16 7:16 root
2018-05-15 7:23 root
2018-05-14 7:16 root
2018-05-13 7:15 root
2018-05-12 7:15 root
2018-05-11 7:16 root
2018-05-10 7:15 root
2018-05-09 7:15 root
2018-05-08 7:15 root
2018-05-07 7:15 root
2018-05-06 7:15 root
2018-05-05 7:15 root
2018-05-04 7:15 root
2018-05-03 7:16 root
2018-05-02 7:15 root
2018-05-01 7:15 root
2018-04-30 8:17 root
2018-04-29 8:22 root
2018-04-28 8:24 root
2018-04-27 8:26 root
2018-04-26 8:25 root
2018-04-25 8:24 root
2018-04-24 8:24 root
2018-04-23 8:23 root
2018-04-22 8:23 root
2018-04-21 7:28 root
2018-04-20 7:28 root
2018-04-19 7:15 root
2018-04-18 7:28 root
2018-04-17 7:16 root
2018-04-16 7:16 root
2018-04-15 7:16 root
2018-04-14 7:16 root
2018-04-13 7:16 root
2018-04-12 7:16 root
2018-04-11 7:16 root
2018-04-10 7:16 root
2018-04-09 7:16 root
2018-04-08 7:16 root
2018-04-07 7:16 root
2018-04-06 7:16 root
2018-04-05 7:16 root
2018-04-04 7:16 root
2018-04-03 7:18 root
2018-04-02 7:16 root
2018-04-01 7:16 root
2018-03-31 7:16 root
2018-03-30 7:20 root
2018-03-29 7:16 root
2018-03-28 7:15 root
2018-03-27 7:15 root
2018-03-26 7:15 root
2018-03-25 7:15 root
2018-03-24 7:15 root
2018-03-23 7:15 root
2018-03-22 7:16 root
2018-03-21 7:15 root
2018-03-20 7:14 root
2018-03-19 7:15 root
2018-03-18 7:15 root
2018-03-17 7:15 root
2018-03-16 7:15 root
2018-03-15 7:15 root
2018-03-05 8:15 root
2018-03-04 8:14 root
2018-03-03 8:15 root
2018-01-14 19:56 root
2018-01-14 9:53 root
2018-01-14 9:39 root
2018-01-14 9:18 root
2018-01-14 8:20 root
2018-01-13 8:20 root
2018-01-12 8:20 root
2018-01-11 8:21 root
2018-01-10 8:20 root
2018-01-09 8:14 root
2018-01-08 8:14 root
2018-01-07 8:17 root
2018-01-07 5:45 root
2017-08-07 7:15 root
2017-08-06 7:15 root
2017-08-05 7:15 root
2017-08-04 7:15 root
2017-08-02 7:15 root
2017-08-01 7:15 root
2017-07-31 7:15 root
2017-07-30 7:15 root
2017-07-29 7:15 root
2017-07-28 7:15 root
2017-07-27 7:15 root
2017-07-26 7:15 root
2017-07-25 7:16 root
2017-07-24 7:15 root
2017-07-23 7:15 root
2017-07-22 7:15 root
2017-07-21 7:15 root
2017-07-20 7:15 root
2017-07-19 7:15 root
2017-07-18 7:15 root
2017-07-17 7:14 root
2017-07-16 7:15 root
2017-07-15 7:15 root
2017-07-14 7:15 root
2017-07-13 7:15 root
2017-07-12 7:15 root
2017-07-11 7:15 root
2017-07-10 7:15 root
2017-07-09 7:15 root
2017-07-08 7:15 root
2017-07-07 7:15 root
2017-07-06 7:15 root
2017-07-05 7:15 root
2017-07-04 7:15 root
2017-07-03 7:15 root
2017-07-02 7:14 root
2017-07-01 7:15 root
2017-06-30 7:15 root
2017-06-29 7:15 root
2017-06-28 7:15 root
2017-06-27 7:15 root
2017-06-26 7:15 root
2017-06-25 7:15 root
2017-06-24 7:15 root
2017-06-23 7:15 root
2017-06-22 7:15 root
2017-06-21 7:15 root
2017-06-20 7:15 root
2017-06-19 7:15 root
2017-06-18 7:14 root
2017-04-10 7:15 root
2017-04-09 7:17 root
2017-04-08 7:17 root
2017-04-07 7:16 root
2017-04-06 7:16 root
2017-04-05 7:15 root
2017-04-04 7:15 root
2017-04-03 7:15 root
2017-04-02 7:15 root
2017-04-01 7:15 root
2017-03-31 7:15 root
2017-01-20 9:08 root
2017-01-19 8:15 root
2017-01-18 8:15 root
2017-01-17 8:15 root
2017-01-16 8:15 root
2017-01-15 8:15 root
2017-01-14 8:15 root
2017-01-13 8:14 root
2016-12-08 8:43 root
2016-12-07 8:19 root
2016-11-24 8:27 root
2016-11-23 17:32 root
2016-11-23 8:21 root
2016-11-17 8:44 root
2016-11-10 8:57 root
2016-11-09 9:25 root
2016-11-08 9:13 root
2016-11-07 11:39 root
2016-11-06 9:29 root
2016-11-06 7:36 root
2016-11-05 8:34 root
2016-11-04 10:51 root
2016-11-03 7:37 root
2016-11-02 7:41 root
2016-11-01 7:35 root
2016-10-31 7:35 root
2016-10-30 9:20 root
2016-10-29 7:51 root
2016-10-28 8:20 root
2016-10-27 7:31 root
2016-10-26 7:52 root
2016-10-25 8:51 root
2016-10-22 7:21 root
2016-10-21 7:26 root
2016-10-20 7:50 root
2016-10-19 7:50 root
2016-10-18 7:47 root
2016-10-17 7:31 root
2016-10-16 7:51 root
2016-10-15 7:36 root
2016-10-14 8:26 root
2016-10-13 7:31 root
2016-10-12 7:33 root
2016-10-11 7:36 root
2016-10-10 7:25 root
2016-10-09 8:07 root
2016-08-03 7:21 root
2016-05-29 9:20 root
2016-05-28 7:18 root
2016-05-04 7:17 root
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170803071520.7A1F2334B1@nightheron.gentoo.org \
--to=vapier@gentoo.org \
--cc=gentoo-releng-autobuilds@lists.gentoo.org \
--cc=releng@gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox