From: "root" <vapier@gentoo.org>
To: releng@gentoo.org,gentoo-releng-autobuilds@lists.gentoo.org
Subject: [gentoo-releng-autobuilds] [s390x-auto] Catalyst fatal build error - stage1.spec
Date: Thu, 27 Jul 2017 05:15:44 -0400 [thread overview]
Message-ID: <20170727091544.AD69632223@nightheron.gentoo.org> (raw)
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20170727/.catalyst_lock'
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-s390x-20170727///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-s390x-20170727//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-s390x-20170727//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-s390x-20170727/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/make sys-apps/findutils sys-devel/gcc virtual/editor sys-devel/autoconf sys-devel/gnuconfig net-misc/wget virtual/pkgconfig virtual/libc sys-apps/diffutils virtual/os-headers sys-apps/gawk app-arch/bzip2 sys-devel/patch virtual/package-manager app-shells/bash:0 sys-devel/binutils virtual/shadow app-arch/gzip sys-apps/which sys-devel/flex app-arch/xz-utils sys-devel/bison sys-apps/sed sys-apps/grep sys-apps/file sys-devel/libtool sys-devel/automake sys-devel/gettext app-arch/tar sys-apps/less sys-apps/net-tools sys-apps/coreutils sys-apps/baselayout sys-apps/makedev net-misc/rsync
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r7 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.10 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.29 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.26.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.9 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.8.6 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.3 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.20 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.9.4 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by virtual/editor-0::gentoo
# required by @system
# required by @world (argument)
=app-editors/nano-2.8.6 ~s390
# required by virtual/perl-Data-Dumper-2.160.0-r1::gentoo
=dev-lang/perl-5.24.2 ~s390
# required by app-eselect/eselect-python-20160516::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=app-admin/eselect-1.4.9 ~s390
# required by virtual/libffi-3.0.13-r1::gentoo
# required by dev-lang/python-2.7.12::gentoo
# required by sys-apps/portage-2.3.3::gentoo[python_targets_python2_7]
# required by virtual/package-manager-0::gentoo
# required by virtual/package-manager (argument)
=dev-libs/libffi-3.2.1 ~s390
# required by sys-apps/grep (argument)
=sys-apps/grep-3.1 ~s390
# required by virtual/perl-File-Path-2.130.0::gentoo
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc-r1::gentoo
=perl-core/File-Path-2.130.0 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-File-Path-2.130.0::gentoo
=virtual/perl-Test-Harness-3.360.100_rc-r1 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc-r1::gentoo
=virtual/perl-File-Path-2.130.0 ~s390
# required by dev-lang/perl-5.24.2::gentoo
# required by virtual/perl-Test-Harness-3.360.100_rc-r1::gentoo
=virtual/perl-Data-Dumper-2.160.0-r1 ~s390
# required by sys-devel/gettext (argument)
=sys-devel/gettext-0.19.8.1 ~s390
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-s390x-20170727/.catalyst_lock'
Command exited with non-zero status 1
33.30user 5.07system 0:47.70elapsed 80%CPU (0avgtext+0avgdata 274464maxresident)k
0inputs+0outputs (409major+795789minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20170727.ApPMhT/log/stage1.log
next reply other threads:[~2017-07-27 9:15 UTC|newest]
Thread overview: 257+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-27 9:15 root [this message]
-- strict thread matches above, loose matches on Subject: below --
2020-01-06 6:47 [gentoo-releng-autobuilds] [s390x-auto] Catalyst fatal build error - stage1.spec root
2019-11-19 11:06 root
2019-11-19 9:04 root
2019-10-27 9:15 root
2019-10-27 7:37 root
2019-10-26 9:15 root
2019-10-26 7:32 root
2019-10-04 9:21 root
2019-10-03 9:21 root
2019-10-02 9:15 root
2019-09-10 10:46 root
2019-06-03 9:15 root
2018-11-26 11:45 root
2018-11-25 11:20 root
2018-11-24 11:28 root
2018-11-23 11:25 root
2018-11-22 11:30 root
2018-11-21 11:33 root
2018-11-20 11:28 root
2018-11-19 11:34 root
2018-11-18 11:55 root
2018-11-17 11:29 root
2018-11-16 11:27 root
2018-11-15 11:20 root
2018-11-14 11:20 root
2018-11-13 11:20 root
2018-11-12 11:20 root
2018-11-11 11:20 root
2018-11-10 11:20 root
2018-11-09 11:20 root
2018-11-08 11:20 root
2018-11-07 11:35 root
2018-11-06 12:04 root
2018-11-05 11:22 root
2018-10-24 10:23 root
2018-08-16 9:32 root
2018-08-15 9:23 root
2018-08-14 9:18 root
2018-08-13 9:27 root
2018-08-12 9:26 root
2018-08-11 9:27 root
2018-08-10 9:27 root
2018-08-09 9:29 root
2018-08-08 9:27 root
2018-08-07 9:27 root
2018-08-06 9:27 root
2018-08-05 9:27 root
2018-08-04 9:28 root
2018-08-03 9:46 root
2018-08-02 9:28 root
2018-08-01 9:29 root
2018-07-31 9:29 root
2018-07-30 9:33 root
2018-07-29 9:27 root
2018-07-28 9:27 root
2018-07-27 9:27 root
2018-07-26 9:42 root
2018-05-31 9:15 root
2018-05-30 9:19 root
2018-05-29 9:16 root
2018-05-28 9:17 root
2018-05-27 9:15 root
2018-05-26 9:15 root
2018-05-25 9:15 root
2018-05-23 9:19 root
2018-05-22 9:15 root
2018-05-21 9:15 root
2018-05-20 9:22 root
2018-05-19 9:23 root
2018-05-18 9:16 root
2018-05-17 9:17 root
2018-05-16 9:15 root
2018-05-15 9:21 root
2018-05-14 9:19 root
2018-05-13 9:20 root
2018-05-12 9:15 root
2018-05-11 9:17 root
2018-05-10 9:15 root
2018-05-09 9:17 root
2018-05-08 9:15 root
2018-05-07 9:15 root
2018-05-06 9:15 root
2018-05-05 9:15 root
2018-05-04 9:18 root
2018-05-03 9:18 root
2018-05-02 9:14 root
2018-05-01 9:15 root
2018-04-30 10:18 root
2018-04-29 10:15 root
2018-04-28 10:22 root
2018-04-27 10:24 root
2018-04-26 10:24 root
2018-04-25 10:21 root
2018-04-24 10:22 root
2018-04-23 10:23 root
2018-04-22 10:21 root
2018-04-21 9:27 root
2018-04-20 9:28 root
2018-04-19 9:29 root
2018-04-18 9:30 root
2018-04-17 9:16 root
2018-04-16 9:16 root
2018-04-15 9:15 root
2018-04-14 9:16 root
2018-04-13 9:16 root
2018-04-12 9:16 root
2018-04-11 9:16 root
2018-04-10 9:17 root
2018-04-09 9:19 root
2018-04-08 9:15 root
2018-04-07 9:16 root
2018-04-06 9:17 root
2018-04-05 9:16 root
2018-04-04 9:14 root
2018-04-03 9:16 root
2018-04-02 9:16 root
2018-04-01 9:15 root
2018-03-31 9:16 root
2018-03-30 9:16 root
2018-03-29 9:16 root
2018-03-28 9:15 root
2018-03-27 9:15 root
2018-03-26 9:15 root
2018-03-25 9:15 root
2018-03-24 9:15 root
2018-03-23 9:15 root
2018-03-22 9:15 root
2018-03-21 9:15 root
2018-03-20 9:15 root
2018-03-19 9:16 root
2018-03-18 9:14 root
2018-03-17 9:15 root
2018-03-16 9:15 root
2018-03-15 9:18 root
2018-03-05 10:15 root
2018-03-04 10:14 root
2018-03-03 10:15 root
2018-01-15 11:21 root
2018-01-14 20:24 root
2018-01-14 10:13 root
2018-01-14 9:51 root
2018-01-14 9:36 root
2018-01-14 9:33 root
2018-01-13 10:13 root
2018-01-12 10:20 root
2018-01-11 10:20 root
2018-01-10 10:20 root
2018-01-09 10:15 root
2018-01-08 10:14 root
2018-01-07 10:14 root
2018-01-07 5:45 root
2017-08-07 9:15 root
2017-08-06 9:15 root
2017-08-05 9:15 root
2017-08-04 9:15 root
2017-08-03 9:15 root
2017-08-02 9:15 root
2017-08-01 9:15 root
2017-07-31 9:15 root
2017-07-30 9:15 root
2017-07-29 9:14 root
2017-07-28 9:15 root
2017-07-26 9:14 root
2017-07-25 9:15 root
2017-07-24 9:15 root
2017-07-23 9:15 root
2017-07-22 9:16 root
2017-07-21 9:14 root
2017-07-20 9:15 root
2017-07-19 9:15 root
2017-07-18 9:14 root
2017-07-17 9:14 root
2017-07-16 9:15 root
2017-07-15 9:15 root
2017-07-14 9:15 root
2017-07-13 9:15 root
2017-07-12 9:15 root
2017-07-11 9:15 root
2017-07-10 9:15 root
2017-07-09 9:15 root
2017-07-08 9:15 root
2017-07-07 9:15 root
2017-07-06 9:15 root
2017-07-05 9:15 root
2017-07-04 9:15 root
2017-07-03 9:15 root
2017-07-02 9:15 root
2017-07-01 9:15 root
2017-06-30 9:15 root
2017-06-29 9:15 root
2017-06-28 9:15 root
2017-06-27 9:15 root
2017-06-26 9:15 root
2017-06-25 9:15 root
2017-06-24 9:15 root
2017-06-23 9:15 root
2017-06-22 9:15 root
2017-06-21 9:15 root
2017-06-20 9:15 root
2017-06-19 9:15 root
2017-06-18 9:14 root
2017-04-10 9:14 root
2017-04-10 3:05 root
2017-04-06 9:16 root
2017-04-05 9:15 root
2017-04-04 9:15 root
2017-04-03 9:15 root
2017-04-02 9:15 root
2017-04-01 9:15 root
2017-03-31 9:15 root
2017-01-20 11:08 root
2017-01-19 10:17 root
2017-01-18 10:15 root
2017-01-17 10:15 root
2017-01-16 10:14 root
2017-01-15 10:15 root
2017-01-14 10:15 root
2017-01-13 10:14 root
2016-12-08 10:47 root
2016-12-07 10:18 root
2016-11-10 10:43 root
2016-11-09 11:56 root
2016-11-08 11:28 root
2016-11-07 13:16 root
2016-11-06 10:55 root
2016-11-05 13:10 root
2016-11-04 11:45 root
2016-11-03 9:26 root
2016-11-02 10:11 root
2016-11-01 9:23 root
2016-10-31 9:28 root
2016-10-30 10:39 root
2016-10-29 10:17 root
2016-10-28 10:22 root
2016-10-27 9:27 root
2016-10-26 9:34 root
2016-10-25 10:01 root
2016-10-22 9:31 root
2016-10-21 9:24 root
2016-10-20 10:04 root
2016-10-19 10:11 root
2016-10-18 10:03 root
2016-10-17 9:20 root
2016-10-16 9:20 root
2016-10-15 9:26 root
2016-10-14 9:44 root
2016-10-13 9:24 root
2016-10-12 10:16 root
2016-10-11 9:25 root
2016-10-10 9:20 root
2016-10-09 9:29 root
2016-10-08 9:28 root
2016-08-03 9:17 root
2016-05-29 10:48 root
2016-05-28 9:24 root
2016-05-04 9:17 root
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170727091544.AD69632223@nightheron.gentoo.org \
--to=vapier@gentoo.org \
--cc=gentoo-releng-autobuilds@lists.gentoo.org \
--cc=releng@gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox