From: catalyst@thor.jmbsvicetto.name
To: jmbsvicetto@gmail.com,gentoo-releng-autobuilds@lists.gentoo.org
Subject: [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - hardened/stage1.spec
Date: Wed, 11 Jan 2017 03:17:05 +0000 (UTC) [thread overview]
Message-ID: <20170111031705.AECFA636E9@thor.jmbsvicetto.name> (raw)
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/hardened/stage1-i686-hardened-20170111/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/hardened/stage1-i686-hardened-20170111/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/hardened/stage1-i686-hardened-20170111 /tmp/stage1-chroot.sh
>>> Regenerating /etc/ld.so.cache...
Adding USE="${USE} build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
The following packages are causing rebuilds:
(sys-libs/ncurses-6.0-r1:0/6::gentoo, ebuild scheduled for merge) causes rebuilds for:
(sys-apps/util-linux-2.26.2:0/0::gentoo, ebuild scheduled for merge)
(app-editors/nano-2.5.3:0/0::gentoo, ebuild scheduled for merge)
(sys-devel/gettext-0.19.7:0/0::gentoo, ebuild scheduled for merge)
(sys-apps/less-487:0/0::gentoo, ebuild scheduled for merge)
(sys-apps/openrc-0.22.4:0/0::gentoo, ebuild scheduled for merge)
>>> Verifying ebuild manifests
>>> Emerging (1 of 8) sys-libs/ncurses-6.0-r1::gentoo
>>> Installing (1 of 8) sys-libs/ncurses-6.0-r1::gentoo
>>> Emerging (2 of 8) sys-apps/less-487::gentoo
>>> Installing (2 of 8) sys-apps/less-487::gentoo
>>> Emerging (3 of 8) sys-devel/gettext-0.19.7::gentoo
>>> Installing (3 of 8) sys-devel/gettext-0.19.7::gentoo
>>> Emerging (4 of 8) sys-apps/portage-2.3.0::gentoo
>>> Installing (4 of 8) sys-apps/portage-2.3.0::gentoo
>>> Emerging (5 of 8) sys-apps/util-linux-2.26.2::gentoo
>>> Installing (5 of 8) sys-apps/util-linux-2.26.2::gentoo
>>> Emerging (6 of 8) sys-process/procps-3.3.12::gentoo
>>> Installing (6 of 8) sys-process/procps-3.3.12::gentoo
>>> Emerging (7 of 8) app-editors/nano-2.5.3::gentoo
>>> Installing (7 of 8) app-editors/nano-2.5.3::gentoo
>>> Emerging (8 of 8) sys-apps/openrc-0.22.4::gentoo
>>> Installing (8 of 8) sys-apps/openrc-0.22.4::gentoo
* Messages for package sys-apps/less-487:
* The lesspipe.sh symlink has been dropped. If you are still setting
* LESSOPEN to that, you will need to update it to '|lesspipe %s'.
* Colorization support has been dropped. If you want that, check out
* the new app-text/lesspipe package.
* Messages for package sys-apps/util-linux-2.26.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
!!! existing preserved libs found
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world
The following packages are causing rebuilds:
(dev-lang/perl-5.22.3_rc4:0/5.22::gentoo, ebuild scheduled for merge) causes rebuilds for:
(sys-apps/texinfo-6.1:0/0::gentoo, ebuild scheduled for merge)
(dev-perl/Text-Unidecode-1.270.0:0/0::gentoo, ebuild scheduled for merge)
(dev-perl/Text-WrapI18N-0.60.0-r1:0/0::gentoo, ebuild scheduled for merge)
(dev-perl/Module-Build-0.421.600:0/0::gentoo, ebuild scheduled for merge)
(dev-perl/Locale-gettext-1.50.0-r1:0/0::gentoo, ebuild scheduled for merge)
(dev-perl/TermReadKey-2.330.0:0/0::gentoo, ebuild scheduled for merge)
(app-text/po4a-0.45-r3:0/0::gentoo, ebuild scheduled for merge)
(perl-core/File-Temp-0.230.400-r1:0/0::gentoo, ebuild scheduled for merge)
(dev-perl/SGMLSpm-1.03-r7:0/0::gentoo, ebuild scheduled for merge)
(dev-perl/Unicode-EastAsianWidth-1.330.0-r1:0/0::gentoo, ebuild scheduled for merge)
(dev-perl/libintl-perl-1.240.0:0/0::gentoo, ebuild scheduled for merge)
(dev-perl/Text-CharWidth-0.40.0-r1:0/0::gentoo, ebuild scheduled for merge)
[ebuild U ] sys-devel/gnuconfig-20161104 [20151214]
[ebuild U ] sys-apps/baselayout-2.3 [2.2]
[ebuild U ] dev-libs/expat-2.2.0-r1 [2.1.1-r2]
[ebuild U ] net-libs/libmnl-1.0.4 [1.0.3-r1]
[ebuild U ] dev-libs/gmp-6.1.0 [6.0.0a]
[ebuild U ] sys-libs/cracklib-2.9.6-r1 [2.9.6]
[ebuild U ] sys-libs/timezone-data-2016h [2016e]
[ebuild U ] sys-apps/net-tools-1.60_p20160215155418 [1.60_p20141019041918-r1]
[ebuild U ] sys-apps/coreutils-8.25 [8.23]
[ebuild U ] virtual/libc-1 [0]
[ebuild r U ] dev-lang/perl-5.22.3_rc4 [5.20.2]
[ebuild U ] sys-kernel/linux-headers-4.4 [4.3]
[ebuild U ] virtual/perl-ExtUtils-MakeMaker-7.40.200_rc [6.980.0]
[ebuild U ] virtual/perl-Test-Harness-3.350.100_rc [3.330.0]
[ebuild U ] virtual/perl-File-Spec-3.560.200_rc [3.480.100-r1]
[ebuild U ] virtual/perl-Parse-CPAN-Meta-1.441.400.100_rc [1.441.400-r1]
[ebuild U ] virtual/perl-CPAN-Meta-YAML-0.12.0-r2 [0.12.0-r1]
[ebuild rR ] dev-perl/SGMLSpm-1.03-r7
[ebuild rR ] dev-perl/libintl-perl-1.240.0
[ebuild rR ] dev-perl/Text-CharWidth-0.40.0-r1
[ebuild rR ] perl-core/File-Temp-0.230.400-r1
[ebuild U ] virtual/perl-Text-ParseWords-3.300.0-r2 [3.290.0-r1]
[ebuild U ] virtual/perl-Perl-OSType-1.8.0-r1 [1.7.0]
[ebuild U ] virtual/perl-Module-Metadata-1.0.26-r1 [1.0.19]
[ebuild U ] virtual/perl-Getopt-Long-2.450.0-r1 [2.420.0-r1]
[ebuild U ] virtual/perl-ExtUtils-ParseXS-3.280.0-r1 [3.240.0]
[ebuild U ] virtual/perl-ExtUtils-Manifest-1.700.0-r3 [1.630.0-r2]
[ebuild U ] virtual/perl-ExtUtils-Install-2.40.0-r2 [1.670.0]
[ebuild U ] virtual/perl-ExtUtils-CBuilder-0.280.221-r1 [0.280.217-r2]
[ebuild U ] virtual/perl-version-0.990.900-r3 [0.990.900-r2]
[ebuild U ] sys-apps/busybox-1.25.1 [1.24.2]
[ebuild U ] virtual/perl-File-Temp-0.230.400-r5 [0.230.400-r4]
[ebuild rR ] dev-perl/Text-Unidecode-1.270.0
[ebuild rR ] dev-perl/TermReadKey-2.330.0
[ebuild rR ] dev-perl/Text-WrapI18N-0.60.0-r1
[ebuild rR ] dev-perl/Unicode-EastAsianWidth-1.330.0-r1
[ebuild U ] sys-devel/libtool-2.4.6-r2 [2.4.6]
[ebuild R ] dev-libs/openssl-1.0.2j
[ebuild U ] virtual/perl-Data-Dumper-2.158.0-r1 [2.154.0]
[uninstall ] perl-core/Data-Dumper-2.154.0
[blocks b ] <perl-core/Data-Dumper-2.158.0 ("<perl-core/Data-Dumper-2.158.0" is blocking virtual/perl-Data-Dumper-2.158.0-r1)
[ebuild U ] virtual/perl-JSON-PP-2.273.0.100_rc-r1 [2.273.0-r1]
[uninstall ] perl-core/JSON-PP-2.273.0
[blocks b ] <perl-core/JSON-PP-2.273.0.100_rc ("<perl-core/JSON-PP-2.273.0.100_rc" is blocking virtual/perl-JSON-PP-2.273.0.100_rc-r1)
[ebuild U ] virtual/perl-CPAN-Meta-2.150.1-r1 [2.150.1]
[ebuild rR ] dev-perl/Module-Build-0.421.600
[ebuild U ] dev-lang/python-exec-2.4.4 [2.0.2]
[ebuild U ] sys-apps/man-pages-4.08 [4.06]
[ebuild U ] sys-apps/sed-4.2.2 [4.2.1-r1]
[ebuild U ] app-arch/tar-1.29-r1 [1.28-r1]
[ebuild U ] sys-process/psmisc-22.21-r3 [22.21-r2]
[ebuild U ] sys-apps/shadow-4.2.1-r2 [4.1.5.1-r1]
[ebuild rR ] sys-apps/texinfo-6.1
[ebuild rR ] dev-perl/Locale-gettext-1.50.0-r1
[ebuild U ] dev-libs/libgpg-error-1.24 [1.19]
[ebuild U ] sys-devel/flex-2.6.1 [2.5.39-r1]
[ebuild NS ] sys-devel/gcc-4.9.4 [4.9.3]
[ebuild U ] dev-libs/libgcrypt-1.7.3 [1.6.5]
[ebuild U ] app-eselect/eselect-python-20160516 [20140125-r1]
[blocks b ] <app-eselect/eselect-python-20160206 ("<app-eselect/eselect-python-20160206" is blocking dev-lang/python-exec-2.4.4)
[ebuild U ] sys-libs/readline-6.3_p8-r3 [6.3_p8-r2]
[ebuild U ] net-misc/netifrc-0.5.1 [0.2.2]
[ebuild U ] sys-libs/e2fsprogs-libs-1.43.3 [1.42.13]
[ebuild U ] dev-util/gtk-doc-am-1.25-r1 [1.25]
[ebuild U ] net-misc/openssh-7.3_p1-r7 [7.2_p2]
[ebuild U ] app-shells/bash-4.3_p48-r1 [4.3_p42-r1]
[ebuild U ] sys-fs/e2fsprogs-1.43.3-r1 [1.42.13]
[ebuild U ] dev-libs/libxml2-2.9.4-r1 [2.9.4]
[ebuild U ] dev-lang/python-3.4.5 [3.4.3-r1]
[blocks b ] <dev-lang/python-3.4.3-r4:3.4 ("<dev-lang/python-3.4.3-r4:3.4" is blocking dev-lang/python-exec-2.4.4)
[ebuild U ] dev-lang/python-2.7.12 [2.7.10-r1]
[blocks b ] <dev-lang/python-2.7.10-r4:2.7 ("<dev-lang/python-2.7.10-r4:2.7" is blocking dev-lang/python-exec-2.4.4)
[ebuild U ] dev-libs/libpcre-8.39 [8.38-r1]
[ebuild U ] app-misc/ca-certificates-20161102.3.27.2-r2 [20151214.3.21]
[ebuild rR ] app-text/po4a-0.45-r3
[ebuild U ] sys-apps/man-db-2.7.6.1-r1 [2.7.5]
[ebuild U ] dev-libs/glib-2.48.2 [2.46.2-r3]
The following USE changes are necessary to proceed:
(see "package.use" in the portage(5) man page for more details)
# required by net-misc/openssh-7.3_p1-r7::gentoo[ssl,-static]
# required by virtual/ssh-0::gentoo[-minimal]
# required by @system
# required by @world (argument)
>=dev-libs/openssl-1.0.2j -bindist
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! All ebuilds that could satisfy ">=dev-libs/openssl-0.9.8f:0[bindist=]" have been masked.
!!! One of the following masked packages is required to complete your request:
- dev-libs/openssl-1.1.0c::gentoo (masked by: package.mask, ~x86 keyword)
/usr/portage/profiles/package.mask:
# Lars Wendler <polynomial-c@gentoo.org> (26 Aug 2016)
# Masked while being tested and reverse deps aren't fully compatible
- dev-libs/openssl-1.0.2j::gentoo (masked by: )
(dependency required by "net-misc/openssh-7.3_p1-r7::gentoo" [ebuild])
(dependency required by "virtual/ssh-0::gentoo[-minimal]" [installed])
(dependency required by "@system" [set])
(dependency required by "@world" [argument])
For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.
11 Jan 2017 03:17:05 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
11 Jan 2017 03:17:05 UTC: ERROR : CatalystError: Stage build aborting due to error.
11 Jan 2017 03:17:05 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1295, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1395, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1304, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
11 Jan 2017 03:17:05 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
433.33user 83.94system 8:15.71elapsed 104%CPU (0avgtext+0avgdata 353336maxresident)k
0inputs+4169608outputs (0major+69185065minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20170111.4y6bBd/log/hardened_stage1.log
next reply other threads:[~2017-01-11 3:17 UTC|newest]
Thread overview: 180+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-11 3:17 catalyst [this message]
-- strict thread matches above, loose matches on Subject: below --
2020-09-30 3:00 [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - hardened/stage1.spec catalyst
2020-09-23 3:00 catalyst
2020-09-16 3:00 catalyst
2020-09-09 3:00 catalyst
2020-09-02 3:00 catalyst
2020-08-26 3:00 catalyst
2020-08-19 3:00 catalyst
2020-08-12 3:00 catalyst
2020-08-05 3:00 catalyst
2020-07-29 3:00 catalyst
2020-07-22 3:00 catalyst
2020-07-15 3:00 catalyst
2020-07-08 3:00 catalyst
2020-07-01 3:00 catalyst
2020-06-24 3:00 catalyst
2020-06-17 3:00 catalyst
2020-06-10 3:00 catalyst
2020-06-03 3:00 catalyst
2020-05-27 3:00 catalyst
2020-05-20 3:00 catalyst
2020-05-16 11:18 catalyst
2020-05-13 3:00 catalyst
2020-05-06 3:01 catalyst
2020-04-29 3:00 catalyst
2020-01-08 4:04 catalyst
2019-09-04 3:00 catalyst
2019-04-20 12:54 catalyst
2019-01-09 7:13 catalyst
2019-01-03 13:28 catalyst
2019-01-03 13:17 catalyst
2019-01-02 21:48 catalyst
2019-01-02 18:44 catalyst
2019-01-02 8:06 catalyst
2018-12-26 6:52 catalyst
2018-12-19 6:54 catalyst
2018-10-18 21:45 catalyst
2018-09-07 12:37 catalyst
2018-09-07 12:36 catalyst
2018-04-13 22:00 catalyst
2018-04-11 22:01 catalyst
2018-04-09 22:01 catalyst
2018-04-06 22:01 catalyst
2018-04-02 21:59 catalyst
2018-02-17 2:36 catalyst
2018-02-15 2:36 catalyst
2018-02-13 2:33 catalyst
2018-02-10 2:04 catalyst
2018-02-03 1:57 catalyst
2018-02-01 3:19 catalyst
2018-01-31 7:20 catalyst
2018-01-31 3:02 catalyst
2018-01-30 1:54 catalyst
2018-01-27 1:46 catalyst
2018-01-25 1:44 catalyst
2018-01-24 6:07 catalyst
2018-01-23 1:42 catalyst
2018-01-20 1:45 catalyst
2017-12-25 22:12 catalyst
2017-12-22 22:11 catalyst
2017-12-20 22:11 catalyst
2017-12-18 23:07 catalyst
2017-10-26 3:26 catalyst
2017-10-26 3:26 catalyst
2017-10-26 3:25 catalyst
2017-10-26 3:25 catalyst
2017-09-27 3:16 catalyst
2017-09-20 3:15 catalyst
2017-09-13 3:14 catalyst
2017-09-05 1:19 catalyst
2017-03-08 3:01 catalyst
2017-03-01 3:00 catalyst
2017-02-22 3:22 catalyst
2017-02-15 3:23 catalyst
2017-02-08 3:22 catalyst
2017-02-01 3:22 catalyst
2017-01-25 3:22 catalyst
2017-01-18 3:21 catalyst
2017-01-04 3:18 catalyst
2016-12-28 3:17 catalyst
2016-12-21 3:17 catalyst
2016-12-14 3:16 catalyst
2016-12-07 3:17 catalyst
2016-11-30 3:02 catalyst
2016-11-23 3:02 catalyst
2016-11-16 3:02 catalyst
2016-11-09 3:02 catalyst
2016-11-02 3:02 catalyst
2016-10-26 3:03 catalyst
2016-10-19 3:03 catalyst
2016-10-12 3:02 catalyst
2016-10-05 3:03 catalyst
2016-09-14 3:01 catalyst
2016-09-07 3:01 catalyst
2016-08-31 3:01 catalyst
2016-08-24 3:01 catalyst
2016-08-17 3:01 catalyst
2016-08-10 3:01 catalyst
2016-08-03 3:01 catalyst
2016-07-27 3:04 catalyst
2016-07-20 3:01 catalyst
2016-05-18 3:04 catalyst
2016-05-11 3:04 catalyst
2015-12-23 3:07 catalyst
2015-12-01 3:10 catalyst
2015-08-19 6:21 catalyst
2015-08-12 10:18 catalyst
2015-07-29 8:24 catalyst
2015-06-19 5:18 catalyst
2015-06-17 3:09 catalyst
2015-06-03 3:06 catalyst
2015-06-01 1:26 catalyst
2015-05-20 3:08 catalyst
2015-05-13 3:08 catalyst
2015-05-06 3:07 catalyst
2015-04-29 3:07 catalyst
2015-04-22 5:23 catalyst
2015-02-22 2:38 catalyst
2015-02-17 1:19 catalyst
2015-02-11 3:08 catalyst
2015-02-10 1:21 catalyst
2015-02-04 3:08 catalyst
2015-02-03 1:20 catalyst
2015-01-28 3:08 catalyst
2015-01-27 1:18 catalyst
2015-01-20 1:19 catalyst
2015-01-13 1:20 catalyst
2015-01-06 1:20 catalyst
2014-12-30 1:20 catalyst
2014-12-23 1:21 catalyst
2014-12-16 1:21 catalyst
2014-12-09 8:24 catalyst
2014-12-02 8:29 catalyst
2014-11-25 8:25 catalyst
2014-11-18 9:48 catalyst
2014-11-12 8:35 catalyst
2014-11-11 8:26 catalyst
2014-11-04 10:14 catalyst
2014-10-28 8:14 catalyst
2014-10-21 8:42 catalyst
2014-10-14 8:15 catalyst
2014-10-07 8:09 catalyst
2014-09-30 8:05 catalyst
2014-09-23 8:06 catalyst
2014-09-16 8:15 catalyst
2014-09-09 7:44 catalyst
2014-09-02 8:05 catalyst
2014-08-26 8:07 catalyst
2014-08-19 8:13 catalyst
2014-08-12 10:32 catalyst
2014-08-12 9:22 catalyst
2014-08-05 8:39 catalyst
2014-08-05 5:01 catalyst
2014-07-29 9:04 catalyst
2014-07-29 8:16 catalyst
2014-07-22 9:03 catalyst
2014-07-22 8:18 catalyst
2014-07-08 9:09 catalyst
2014-07-01 5:14 catalyst
2012-09-18 1:15 catalyst
2012-09-11 1:38 catalyst
2012-09-04 1:38 catalyst
2012-02-22 5:04 catalyst
2012-02-15 4:45 catalyst
2012-02-08 4:49 catalyst
2012-02-01 4:44 catalyst
2012-01-25 4:44 catalyst
2012-01-17 11:49 catalyst
2012-01-11 5:06 catalyst
2012-01-04 5:07 catalyst
2011-12-27 19:04 catalyst
2011-12-20 19:04 catalyst
2011-12-14 4:46 catalyst
2011-11-22 6:09 catalyst
2011-11-15 6:40 catalyst
2011-08-23 1:33 catalyst
2011-08-16 3:31 catalyst
2011-05-17 3:07 catalyst
2011-02-01 22:02 catalyst
2011-01-25 19:54 catalyst
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170111031705.AECFA636E9@thor.jmbsvicetto.name \
--to=catalyst@thor.jmbsvicetto.name \
--cc=gentoo-releng-autobuilds@lists.gentoo.org \
--cc=jmbsvicetto@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox