[gentoo-releng-autobuilds] [x86-auto] Catalyst non-fatal build error - hardened/admincd-stage1.spec

[catalyst@nightheron.gentoo.org]

 * Messages for package sys-apps/keyutils-1.5.9-r1:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Messages for package sys-apps/chname-1.0-r2:
 * Note: chname requires a or later kernel with CONFIG_UTS_NS=y.
 * Messages for package sys-block/tw_cli-10.2:
 * This binary supports should support ALL cards, including, but not
 * limited to the following series:
 * 
 * PATA: 6xxx, 72xx, 74xx, 78xx, 7000, 7500, 7506
 * SATA: 8006, 8500, 8506, 9500S, 9550SX, 9590SE,
 *       9550SXU, 9650SE, 9650SE-{24M8,4LPME},
 *       9690SA, 9750
 * 
 * Release notes for this version are available at:
 * http://www.lsi.com/DistributionSystem/AssetDocument/10.2_Release_Notes_Web.pdf
 * Upstream's 10.2 release is missing the tw_cli manpage.
 * Messages for package sys-apps/busybox-1.24.2:
 * Could not locate user configfile, so we will save a default one
 * You cannot have USE='static pam'.  Assuming static is more important.
 * Your configuration for sys-apps/busybox-1.24.2 has been saved in 
 * /etc/portage/savedconfig/sys-apps/busybox-1.24.2 for your editing pleasure.
 * You can edit these files by hand and remerge this package with
 * USE=savedconfig to customise the configuration.
 * You can rename this file/directory to one of the following for
 * its configuration to apply to multiple versions:
 * ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
 * [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
 * Messages for package net-dialup/ppp-2.4.7:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Pon, poff and plog scripts have been supplied for experienced users.
 * Users needing particular scripts (ssh,rsh,etc.) should check out the
 * /usr/share/doc/ppp-2.4.7/scripts directory.
 * Messages for package net-misc/bridge-utils-1.5:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Messages for package app-misc/screen-4.3.1-r1:
 * Some dangerous key bindings have been removed or changed to more safe values.
 * We enable some xterm hacks in our default screenrc, which might break some
 * applications. Please check /etc/screenrc for information on these changes.
 * This revision changes the screen socket location to /tmp/screen
 * Messages for package net-dialup/rp-pppoe-3.11-r3:
 * Use pppoe-setup to configure your dialup connection
 * 
 * (Note: Above message is only printed the first time package is
 * installed. Please look at /usr/share/doc/rp-pppoe-3.11-r3/README.gentoo*
 * for future reference)
 * Messages for package net-fs/cifs-utils-6.4:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * You must enable CIFS support in your kernel config, 
 * to be able to mount samba shares. You can find it at
 * 
 *   File systems
 * 	Network File Systems
 * 			CIFS support
 * 
 * and recompile your kernel ...
 * setuid use flag was dropped due to multiple security implications
 * such as CVE-2009-2948, CVE-2011-3585 and CVE-2012-1586
 * You are free to set setuid flags by yourself
 * Messages for package app-emacs/emacs-common-gentoo-1.5:
 * All site initialisation for Gentoo-installed packages is added to
 * /usr/share/emacs/site-lisp/site-gentoo.el. In order for this site
 * initialisation to be loaded for all users automatically, a default
 * site startup file /etc/emacs/site-start.el is installed. You are
 * responsible for maintenance of this file.
 * 
 * Alternatively, individual users can add the following command:
 * 
 * (require 'site-gentoo)
 * 
 * to their ~/.emacs initialisation files, or, for greater flexibility,
 * users may load single package-specific initialisation files from the
 * /usr/share/emacs/site-lisp/site-gentoo.d/ directory.
 * 
 * (Note: Above message is only printed the first time package is
 * installed. Please look at /usr/share/doc/emacs-common-gentoo-1.5/README.gentoo*
 * for future reference)
 * Messages for package dev-util/ctags-5.8:
 * You can set the version to be started by /usr/bin/ctags through
 * the ctags eselect module. "man ctags.eselect" for details.
 * Messages for package sys-apps/openrc-0.19.1:
 * In this version of OpenRC, the loopback interface no longer
 * satisfies the net virtual.
 * If you have services now which do not start because of this,
 * They can be fixed by adding rc_need="!net"
 * to the /etc/conf.d/<servicename> file.
 * You should also file a bug against the service asking that
 * need net be dropped from the dependencies.
 * The bug you file should block the following tracker:
 * https://bugs.gentoo.org/show_bug.cgi?id=439092
 * 
 * Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
 * fixed correctly in earlier versions of OpenRC.
 * The correct fix is implemented in this version, but that
 * means netmount needs to be added to the default runlevel if
 * you are using nfs file systems.
 * 
 * You should now update all files in /etc, using etc-update
 * or equivalent before restarting any services or this host.
 * Messages for package sys-fs/fuse-2.9.4:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Messages for package dev-python/jinja-2.8:
 * For i18n support, please emerge dev-python/Babel.
 * Messages for package dev-python/cryptography-1.1.2:
 * ERROR: dev-python/cryptography-1.1.2::gentoo failed (compile phase):
 *   (no error message)
 * 
 * Call stack:
 *     ebuild.sh, line  133:  Called src_compile
 *   environment, line 3664:  Called distutils-r1_src_compile
 *   environment, line  959:  Called _distutils-r1_run_foreach_impl 'distutils-r1_python_compile'
 *   environment, line  359:  Called python_foreach_impl 'distutils-r1_run_phase' 'distutils-r1_python_compile'
 *   environment, line 3199:  Called multibuild_foreach_variant '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'distutils-r1_python_compile'
 *   environment, line 2308:  Called _multibuild_run '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'distutils-r1_python_compile'
 *   environment, line 2306:  Called _python_multibuild_wrapper 'distutils-r1_run_phase' 'distutils-r1_python_compile'
 *   environment, line  626:  Called distutils-r1_run_phase 'distutils-r1_python_compile'
 *   environment, line  950:  Called distutils-r1_python_compile
 *   environment, line  825:  Called esetup.py 'build'
 *   environment, line 1452:  Called die
 * The specific snippet of code:
 *       "${@}" || die "${die_args[@]}";
 * 
 * If you need support, post the output of `emerge --info '=dev-python/cryptography-1.1.2::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=dev-python/cryptography-1.1.2::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/dev-python/cryptography-1.1.2/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/dev-python/cryptography-1.1.2/temp/environment'.
 * Working directory: '/var/tmp/portage/dev-python/cryptography-1.1.2/work/cryptography-1.1.2'
 * S: '/var/tmp/portage/dev-python/cryptography-1.1.2/work/cryptography-1.1.2'









































!!! catalyst: Error in attempt to build packages


Traceback (most recent call last):
  File "modules/generic_stage_target.py", line 1432, in build_packages
    "Error in attempt to build packages",env=self.env)
  File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
    raise CatalystError,myexc
CatalystError
None

!!! catalyst: livecdbuild aborting due to error.

Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
    mytarget.run()
File "modules/generic_stage_target.py", line 1333, in run
    apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1437, in build_packages
    "build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/hardened/livecd-stage1-x86-20160719/.catalyst_lock'
Command exited with non-zero status 1
6442.52user 1061.70system 1:18:41elapsed 158%CPU (0avgtext+0avgdata 2410416maxresident)k
92840inputs+11533384outputs (1major+299985200minor)pagefaults 0swaps



Full build log at /release/tmp/run/catalyst-auto.20160719.fCJGGv/log/hardened_admincd-stage1.log