* [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage2-selinux-nomultilib.spec
@ 2015-03-02 20:19 catalyst
0 siblings, 0 replies; 14+ messages in thread
From: catalyst @ 2015-03-02 20:19 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
checking assembler for hle prefixes... yes
checking assembler for swap suffix... yes
checking assembler for different section symbol subtraction... yes
checking assembler for GOTOFF in data... yes
checking assembler for rep and lock prefix... yes
checking assembler for ud2 mnemonic... yes
checking assembler for R_386_TLS_GD_PLT reloc... no
checking assembler for R_386_TLS_LDM_PLT reloc... no
checking assembler for dwarf2 debug_line support... yes
checking assembler for buggy dwarf2 .file directive... no
checking assembler for --gdwarf2 option... yes
checking assembler for --gstabs option... yes
checking assembler for --debug-prefix-map option... yes
checking assembler for .lcomm with alignment... no
checking assembler for gnu_unique_object... yes
ldd (Gentoo 2.19-r1 p3) 2.19
Copyright (C) 2014 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Written by Roland McGrath and Ulrich Drepper.
checking assembler for tolerance to line number 0... yes
checking linker PT_GNU_EH_FRAME support... yes
checking linker position independent executable support... yes
checking linker EH-compatible garbage collection of sections... yes
checking linker EH garbage collection of sections bug... no
checking linker --as-needed support... yes
checking linker --build-id support... yes
checking linker *_sol2 emulation support... no
checking linker --sysroot support... yes
checking __stack_chk_fail in target C library... (cached) yes
checking sys/sdt.h in the target C library... no
checking dl_iterate_phdr in target C library... unknown
checking whether to enable maintainer-specific portions of Makefiles... no
Links are now set up to build a native compiler for x86_64-pc-linux-gnu.
checking for exported symbols... yes
checking for -rdynamic... yes
checking for library containing dlopen... -ldl
checking for -fPIC -shared... yes
checking if x86_64-pc-linux-gnu support esp... yes
checking checking for crtbeginP.o support... yes
configure: updating cache ./config.cache
configure: creating ./config.status
config.status: creating as
config.status: creating collect-ld
config.status: creating nm
config.status: creating Makefile
config.status: creating ada/gcc-interface/Makefile
config.status: creating ada/Makefile
config.status: creating auto-host.h
config.status: executing default commands
make[3]: Entering directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/libcpp'
x86_64-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o charset.o -MT charset.o -MMD -MP -MF .deps/charset.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/charset.c
x86_64-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o lex.o -MT lex.o -MMD -MP -MF .deps/lex.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/lex.c
x86_64-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o line-map.o -MT line-map.o -MMD -MP -MF .deps/line-map.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/line-map.c
x86_64-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o macro.o -MT macro.o -MMD -MP -MF .deps/macro.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/macro.c
x86_64-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o mkdeps.o -MT mkdeps.o -MMD -MP -MF .deps/mkdeps.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/mkdeps.c
x86_64-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o pch.o -MT pch.o -MMD -MP -MF .deps/pch.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/pch.c
x86_64-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o symtab.o -MT symtab.o -MMD -MP -MF .deps/symtab.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/symtab.c
x86_64-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o traditional.o -MT traditional.o -MMD -MP -MF .deps/traditional.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/traditional.c
echo "#define LOCALEDIR \"/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.3/locale\"" > localedir.new
/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../move-if-change localedir.new localedir.h
echo timestamp > localedir.hs
x86_64-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o identifiers.o -MT identifiers.o -MMD -MP -MF .deps/identifiers.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/identifiers.c
x86_64-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o files.o -MT files.o -MMD -MP -MF .deps/files.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/files.c
x86_64-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o init.o -MT init.o -MMD -MP -MF .deps/init.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/init.c
x86_64-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o expr.o -MT expr.o -MMD -MP -MF .deps/expr.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/expr.c
x86_64-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o errors.o -MT errors.o -MMD -MP -MF .deps/errors.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/errors.c
x86_64-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o directives-only.o -MT directives-only.o -MMD -MP -MF .deps/directives-only.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/directives-only.c
x86_64-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o directives.o -MT directives.o -MMD -MP -MF .deps/directives.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/directives.c
rm -f libcpp.a
x86_64-pc-linux-gnu-ar cru libcpp.a charset.o directives.o directives-only.o errors.o expr.o files.o identifiers.o init.o lex.o line-map.o macro.o mkdeps.o pch.o symtab.o traditional.o
x86_64-pc-linux-gnu-ranlib libcpp.a
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/libcpp'
make[3]: Entering directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/gcc'
TARGET_CPU_DEFAULT="" \
HEADERS="auto-host.h ansidecl.h" DEFINES="" \
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/mkconfig.sh config.h
x86_64-pc-linux-gnu-g++ -c -DEFAULT_PIE_SSP -fno-PIE -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -DGENERATOR_FILE -I. -Ibuild -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/build -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include \
-DBASEVER="\"4.8.3\"" -DDATESTAMP="\"\"" \
-DREVISION="\"\"" \
-DDEVPHASE="\"\"" -DPKGVERSION="\"(Gentoo Hardened 4.8.3 p1.1, pie-0.5.9) \"" \
-DBUGURL="\"<https://bugs.gentoo.org/>\"" -o build/version.o /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/version.c
rm -f tmp-all-tree.def
echo '#include "tree.def"' > tmp-all-tree.def
echo 'END_OF_BASE_TREE_CODES' >> tmp-all-tree.def
echo '#include "c-family/c-common.def"' >> tmp-all-tree.def
ltf="/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/ada/gcc-interface/ada-tree.def /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/cp/cp-tree.def /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/java/java-tree.def /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/objc/objc-tree.def"; for f in $ltf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/||' >> tmp-all-tree.def
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-all-tree.def all-tree.def
echo timestamp > s-alltree
lsf="/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/cp/lang-specs.h /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/lto/lang-specs.h"; for f in $lsf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/||' > tmp-specs.h
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-specs.h specs.h
echo timestamp > s-specs
echo "x86_64-pc-linux-gnu-g++ -DEFAULT_PIE_SSP -fno-PIE -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -static-libstdc++ -static-libgcc -Wl,-O1 -Wl,--as-needed" > checksum-options.tmp \
&& /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change checksum-options.tmp checksum-options
gawk -f /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/config/i386/i386-builtin-types.awk /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/config/i386/i386-builtin-types.def > tmp-bt.inc
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-bt.inc i386-builtin-types.inc
echo timestamp > s-i386-bt
cp /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c gcc-nm.c
cp /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c gcc-ranlib.c
rm -f mm_malloc.h
cat /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/config/i386/pmm_malloc.h > mm_malloc.h
TARGET_CPU_DEFAULT="" \
HEADERS="auto-host.h ansidecl.h" DEFINES="USED_FOR_TARGET " \
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/mkconfig.sh tconfig.h
(echo "@set version-GCC 4.8.3"; \
if [ "" = "experimental" ]; \
then echo "@set DEVELOPMENT"; \
else echo "@clear DEVELOPMENT"; \
fi) > gcc-vers.texiT
echo @set srcdir /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc >> gcc-vers.texiT
if [ -n "(Gentoo Hardened 4.8.3 p1.1, pie-0.5.9) " ]; then \
echo "@set VERSION_PACKAGE (Gentoo Hardened 4.8.3 p1.1, pie-0.5.9) " >> gcc-vers.texiT; \
fi
echo "@set BUGURL @uref{https://bugs.gentoo.org/}" >> gcc-vers.texiT; \
mv -f gcc-vers.texiT gcc-vers.texi
echo timestamp > gpl.pod
perl /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../contrib/texi2pod.pl /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/doc/include/gpl_v3.texi > gpl.pod
x86_64-pc-linux-gnu-g++ -c -DEFAULT_PIE_SSP -fno-PIE -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\" -DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"x86_64-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/x86_64-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"x86_64-pc-linux-gnu\" -DPERSONALITY=\"ar\" -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sy
s-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c -o gcc-ar.o
x86_64-pc-linux-gnu-g++ -c -DEFAULT_PIE_SSP -fno-PIE -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\" -DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"x86_64-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/x86_64-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"x86_64-pc-linux-gnu\" -DPERSONALITY=\"nm\" -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sy
s-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace gcc-nm.c -o gcc-nm.o
x86_64-pc-linux-gnu-g++ -c -DEFAULT_PIE_SSP -fno-PIE -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\" -DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"x86_64-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/x86_64-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"x86_64-pc-linux-gnu\" -DPERSONALITY=\"ranlib\" -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portag
e/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace gcc-ranlib.c -o gcc-ranlib.o
x86_64-pc-linux-gnu-g++ -c -DEFAULT_PIE_SSP -fno-PIE -DGENERATOR_FILE -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gengtype.c -o gengtype.o
/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gengtype.c:21:21: fatal error: bconfig.h: No such file or directory
#include "bconfig.h"
^
compilation terminated.
Makefile:1070: recipe for target 'gengtype.o' failed
make[3]: *** [gengtype.o] Error 1
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/gcc'
Makefile:4152: recipe for target 'all-stage1-gcc' failed
make[2]: *** [all-stage1-gcc] Error 2
make[2]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
Makefile:16150: recipe for target 'stage1-bubble' failed
make[1]: *** [stage1-bubble] Error 2
make[1]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
Makefile:16465: recipe for target 'bootstrap-lean' failed
make: *** [bootstrap-lean] Error 2
* ERROR: sys-devel/gcc-4.8.3::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.3::gentoo'`.
* The complete build log is located at '/var/log/portage/sys-devel:gcc-4.8.3:20150302-201635.log'.
* For convenience, a symlink to the build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-build-logs.tar.bz2 in your bug report.
*
* Messages for package sys-apps/baselayout-2.2:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* Messages for package sys-devel/gcc-4.8.3:
* ERROR: sys-devel/gcc-4.8.3::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.3::gentoo'`.
* The complete build log is located at '/var/log/portage/sys-devel:gcc-4.8.3:20150302-201635.log'.
* For convenience, a symlink to the build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-build-logs.tar.bz2 in your bug report.
*
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1253, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1333, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1258, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage2
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/amd64-dev/tmp/hardened/stage2-amd64-hardened-selinux+nomultilib-20150302/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.NR0ygR/log/hardened_stage2-selinux-nomultilib.log
^ permalink raw reply [flat|nested] 14+ messages in thread
* [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage2-selinux-nomultilib.spec
@ 2015-10-23 12:39 catalyst
0 siblings, 0 replies; 14+ messages in thread
From: catalyst @ 2015-10-23 12:39 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
23 Oct 2015 12:39:30 UTC: NOTICE : Using command line specified Catalyst configuration file: /etc/catalyst/release/amd64-auto.conf
ContentsMap: __init__(), search_order = ['pixz', 'lbzip2', 'isoinfo_l', 'squashfs', 'gzip', 'xz', 'bzip2', 'tar', 'isoinfo_f']
23 Oct 2015 12:39:30 UTC: NOTICE : Using target: stage2
23 Oct 2015 12:39:30 UTC: NOTICE : Source path set to /home/release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-selinux+nomultilib-20151023/tmp/stage1root
23 Oct 2015 12:39:30 UTC: WARNING : If this is not desired, remove this directory or turn off seedcache in the
23 Oct 2015 12:39:30 UTC: WARNING : options of catalyst.conf. The source path will then be:
23 Oct 2015 12:39:30 UTC: WARNING : /home/release/buildroot/amd64-dev/builds/hardened/stage1-amd64-hardened-selinux+nomultilib-20151023
COMPRESS: __init__(), search_order = ['pixz_x', 'lbzip2_x', 'squashfs', 'gzip_x', 'xz_x', 'bzip2_x', 'tar_x']
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
23 Oct 2015 12:39:40 UTC: NOTICE : purge(); clearing autoresume ...
23 Oct 2015 12:39:40 UTC: NOTICE : purge(); clearing chroot ...
23 Oct 2015 12:39:40 UTC: NOTICE : Clearing the chroot path ...
23 Oct 2015 12:39:40 UTC: NOTICE : purge(); clearing package cache ...
23 Oct 2015 12:39:40 UTC: NOTICE : purging the pkgcache ...
23 Oct 2015 12:39:40 UTC: NOTICE : purge(); clearing kerncache ...
23 Oct 2015 12:39:40 UTC: NOTICE : --- Running action sequence: unpack
23 Oct 2015 12:39:40 UTC: NOTICE : Starting rsync from /home/release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-selinux+nomultilib-20151023/tmp/stage1root
23 Oct 2015 12:39:40 UTC: NOTICE : to /home/release/buildroot/amd64-dev/tmp/hardened/stage2-amd64-hardened-selinux+nomultilib-20151023 (this may take some time) ..
23 Oct 2015 12:39:42 UTC: NOTICE : --- Running action sequence: unpack_snapshot
COMPRESS: determine_mode(), source = /home/release/buildroot/amd64-dev/snapshots/portage-20151023.tar.bz2
COMPRESS: determine_mode(), mode = pixz_x ['pixz_x', 'lbzip2_x', 'squashfs', 'gzip_x', 'xz_x', 'bzip2_x', 'tar_x']
COMPRESS: determine_mode(), mode = lbzip2_x ['pixz_x', 'lbzip2_x', 'squashfs', 'gzip_x', 'xz_x', 'bzip2_x', 'tar_x']
23 Oct 2015 12:39:42 UTC: NOTICE : --- Running action sequence: setup_confdir
rsync: mkdir "/home/release/buildroot/amd64-dev/tmp/hardened/stage2-amd64-hardened-selinux+nomultilib-20151023/etc/portage" failed: No such file or directory (2)
rsync error: error in file IO (code 11) at main.c(656) [Receiver=3.1.1]
23 Oct 2015 12:39:42 UTC: ERROR : CatalystError: cmd() NON-zero return value from: Error copying /etc/portage
23 Oct 2015 12:39:42 UTC: ERROR : Exception running action sequence setup_confdir
Traceback (most recent call last):
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1405, in run
getattr(self, x)()
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 899, in setup_confdir
env=self.env)
File "/usr/lib64/python2.7/site-packages/catalyst/support.py", line 56, in cmd
print_traceback=False)
CatalystError
23 Oct 2015 12:39:42 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /home/release/tmp/run/catalyst-auto.QiFwh7/log/hardened_stage2-selinux-nomultilib.log
^ permalink raw reply [flat|nested] 14+ messages in thread
* [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage2-selinux-nomultilib.spec
@ 2015-10-24 9:28 catalyst
0 siblings, 0 replies; 14+ messages in thread
From: catalyst @ 2015-10-24 9:28 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
24 Oct 2015 09:28:11 UTC: NOTICE : Using command line specified Catalyst configuration file: /etc/catalyst/release/amd64-auto.conf
ContentsMap: __init__(), search_order = ['pixz', 'lbzip2', 'isoinfo_l', 'squashfs', 'gzip', 'xz', 'bzip2', 'tar', 'isoinfo_f']
24 Oct 2015 09:28:11 UTC: NOTICE : Using target: stage2
24 Oct 2015 09:28:11 UTC: NOTICE : Source path set to /home/release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-selinux+nomultilib-20151024/tmp/stage1root
24 Oct 2015 09:28:11 UTC: WARNING : If this is not desired, remove this directory or turn off seedcache in the
24 Oct 2015 09:28:11 UTC: WARNING : options of catalyst.conf. The source path will then be:
24 Oct 2015 09:28:11 UTC: WARNING : /home/release/buildroot/amd64-dev/builds/hardened/stage1-amd64-hardened-selinux+nomultilib-20151024
COMPRESS: __init__(), search_order = ['pixz_x', 'lbzip2_x', 'squashfs', 'gzip_x', 'xz_x', 'bzip2_x', 'tar_x']
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
24 Oct 2015 09:28:21 UTC: NOTICE : purge(); clearing autoresume ...
24 Oct 2015 09:28:21 UTC: NOTICE : purge(); clearing chroot ...
24 Oct 2015 09:28:21 UTC: NOTICE : Clearing the chroot path ...
24 Oct 2015 09:28:21 UTC: NOTICE : purge(); clearing package cache ...
24 Oct 2015 09:28:21 UTC: NOTICE : purging the pkgcache ...
24 Oct 2015 09:28:21 UTC: NOTICE : purge(); clearing kerncache ...
24 Oct 2015 09:28:21 UTC: NOTICE : --- Running action sequence: unpack
24 Oct 2015 09:28:21 UTC: NOTICE : Starting rsync from /home/release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-selinux+nomultilib-20151024/tmp/stage1root
24 Oct 2015 09:28:21 UTC: NOTICE : to /home/release/buildroot/amd64-dev/tmp/hardened/stage2-amd64-hardened-selinux+nomultilib-20151024 (this may take some time) ..
24 Oct 2015 09:28:23 UTC: NOTICE : --- Running action sequence: unpack_snapshot
COMPRESS: determine_mode(), source = /home/release/buildroot/amd64-dev/snapshots/portage-20151024.tar.bz2
COMPRESS: determine_mode(), mode = pixz_x ['pixz_x', 'lbzip2_x', 'squashfs', 'gzip_x', 'xz_x', 'bzip2_x', 'tar_x']
COMPRESS: determine_mode(), mode = lbzip2_x ['pixz_x', 'lbzip2_x', 'squashfs', 'gzip_x', 'xz_x', 'bzip2_x', 'tar_x']
24 Oct 2015 09:28:23 UTC: NOTICE : --- Running action sequence: setup_confdir
rsync: mkdir "/home/release/buildroot/amd64-dev/tmp/hardened/stage2-amd64-hardened-selinux+nomultilib-20151024/etc/portage" failed: No such file or directory (2)
rsync error: error in file IO (code 11) at main.c(656) [Receiver=3.1.1]
24 Oct 2015 09:28:23 UTC: ERROR : CatalystError: cmd() NON-zero return value from: Error copying /etc/portage
24 Oct 2015 09:28:23 UTC: ERROR : Exception running action sequence setup_confdir
Traceback (most recent call last):
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1405, in run
getattr(self, x)()
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 899, in setup_confdir
env=self.env)
File "/usr/lib64/python2.7/site-packages/catalyst/support.py", line 56, in cmd
print_traceback=False)
CatalystError
24 Oct 2015 09:28:23 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /home/release/tmp/run/catalyst-auto.hZ64EC/log/hardened_stage2-selinux-nomultilib.log
^ permalink raw reply [flat|nested] 14+ messages in thread
* [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage2-selinux-nomultilib.spec
@ 2015-10-26 11:49 catalyst
0 siblings, 0 replies; 14+ messages in thread
From: catalyst @ 2015-10-26 11:49 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
26 Oct 2015 11:48:59 UTC: NOTICE : Using command line specified Catalyst configuration file: /etc/catalyst/release/amd64-auto.conf
ContentsMap: __init__(), search_order = ['pixz', 'lbzip2', 'isoinfo_l', 'squashfs', 'gzip', 'xz', 'bzip2', 'tar', 'isoinfo_f']
26 Oct 2015 11:48:59 UTC: NOTICE : Using target: stage2
26 Oct 2015 11:48:59 UTC: NOTICE : Source path set to /home/release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-selinux+nomultilib-20151026/tmp/stage1root
26 Oct 2015 11:48:59 UTC: WARNING : If this is not desired, remove this directory or turn off seedcache in the
26 Oct 2015 11:48:59 UTC: WARNING : options of catalyst.conf. The source path will then be:
26 Oct 2015 11:48:59 UTC: WARNING : /home/release/buildroot/amd64-dev/builds/hardened/stage1-amd64-hardened-selinux+nomultilib-20151026
COMPRESS: __init__(), search_order = ['pixz_x', 'lbzip2_x', 'squashfs', 'gzip_x', 'xz_x', 'bzip2_x', 'tar_x']
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
26 Oct 2015 11:49:09 UTC: NOTICE : purge(); clearing autoresume ...
26 Oct 2015 11:49:09 UTC: NOTICE : purge(); clearing chroot ...
26 Oct 2015 11:49:09 UTC: NOTICE : Clearing the chroot path ...
26 Oct 2015 11:49:09 UTC: NOTICE : purge(); clearing package cache ...
26 Oct 2015 11:49:09 UTC: NOTICE : purging the pkgcache ...
26 Oct 2015 11:49:09 UTC: NOTICE : purge(); clearing kerncache ...
26 Oct 2015 11:49:09 UTC: NOTICE : --- Running action sequence: unpack
26 Oct 2015 11:49:09 UTC: NOTICE : Starting rsync from /home/release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-selinux+nomultilib-20151026/tmp/stage1root
26 Oct 2015 11:49:09 UTC: NOTICE : to /home/release/buildroot/amd64-dev/tmp/hardened/stage2-amd64-hardened-selinux+nomultilib-20151026 (this may take some time) ..
26 Oct 2015 11:49:11 UTC: NOTICE : --- Running action sequence: unpack_snapshot
COMPRESS: determine_mode(), source = /home/release/buildroot/amd64-dev/snapshots/portage-20151026.tar.bz2
COMPRESS: determine_mode(), mode = pixz_x ['pixz_x', 'lbzip2_x', 'squashfs', 'gzip_x', 'xz_x', 'bzip2_x', 'tar_x']
COMPRESS: determine_mode(), mode = lbzip2_x ['pixz_x', 'lbzip2_x', 'squashfs', 'gzip_x', 'xz_x', 'bzip2_x', 'tar_x']
26 Oct 2015 11:49:11 UTC: NOTICE : --- Running action sequence: setup_confdir
rsync: mkdir "/home/release/buildroot/amd64-dev/tmp/hardened/stage2-amd64-hardened-selinux+nomultilib-20151026/etc/portage" failed: No such file or directory (2)
rsync error: error in file IO (code 11) at main.c(656) [Receiver=3.1.1]
26 Oct 2015 11:49:11 UTC: ERROR : CatalystError: cmd() NON-zero return value from: Error copying /etc/portage
26 Oct 2015 11:49:11 UTC: ERROR : Exception running action sequence setup_confdir
Traceback (most recent call last):
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1405, in run
getattr(self, x)()
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 899, in setup_confdir
env=self.env)
File "/usr/lib64/python2.7/site-packages/catalyst/support.py", line 56, in cmd
print_traceback=False)
CatalystError
26 Oct 2015 11:49:11 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /home/release/tmp/run/catalyst-auto.9Wwtt6/log/hardened_stage2-selinux-nomultilib.log
^ permalink raw reply [flat|nested] 14+ messages in thread
* [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage2-selinux-nomultilib.spec
@ 2015-10-29 11:37 catalyst
0 siblings, 0 replies; 14+ messages in thread
From: catalyst @ 2015-10-29 11:37 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
29 Oct 2015 11:37:08 UTC: NOTICE : Using command line specified Catalyst configuration file: /etc/catalyst/release/amd64-auto.conf
ContentsMap: __init__(), search_order = ['pixz', 'lbzip2', 'isoinfo_l', 'squashfs', 'gzip', 'xz', 'bzip2', 'tar', 'isoinfo_f']
29 Oct 2015 11:37:08 UTC: NOTICE : Using target: stage2
29 Oct 2015 11:37:08 UTC: NOTICE : Source path set to /home/release/buildroot/amd64-dev/builds/hardened/stage1-amd64-hardened-selinux+nomultilib-20151029
29 Oct 2015 11:37:08 UTC: WARNING : If this is not desired, remove this directory or turn off seedcache in the
29 Oct 2015 11:37:08 UTC: WARNING : options of catalyst.conf. The source path will then be:
29 Oct 2015 11:37:08 UTC: WARNING : /home/release/buildroot/amd64-dev/builds/hardened/stage1-amd64-hardened-selinux+nomultilib-20151029
COMPRESS: __init__(), search_order = ['pixz_x', 'lbzip2_x', 'squashfs', 'gzip_x', 'xz_x', 'bzip2_x', 'tar_x']
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
29 Oct 2015 11:37:18 UTC: NOTICE : purge(); clearing autoresume ...
29 Oct 2015 11:37:18 UTC: NOTICE : purge(); clearing chroot ...
29 Oct 2015 11:37:18 UTC: NOTICE : Clearing the chroot path ...
29 Oct 2015 11:37:18 UTC: NOTICE : purge(); clearing package cache ...
29 Oct 2015 11:37:18 UTC: NOTICE : purging the pkgcache ...
29 Oct 2015 11:37:18 UTC: NOTICE : purge(); clearing kerncache ...
29 Oct 2015 11:37:18 UTC: NOTICE : --- Running action sequence: unpack
29 Oct 2015 11:37:18 UTC: ERROR : CatalystError: source path is a dir but seedcache is not enabled
29 Oct 2015 11:37:18 UTC: ERROR : Exception running action sequence unpack
Traceback (most recent call last):
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1405, in run
getattr(self, x)()
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 759, in unpack
"source path is a dir but seedcache is not enabled")
CatalystError
29 Oct 2015 11:37:18 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /home/release/tmp/run/catalyst-auto.ZbD62m/log/hardened_stage2-selinux-nomultilib.log
^ permalink raw reply [flat|nested] 14+ messages in thread
* [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage2-selinux-nomultilib.spec
@ 2015-10-30 13:08 catalyst
0 siblings, 0 replies; 14+ messages in thread
From: catalyst @ 2015-10-30 13:08 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
30 Oct 2015 13:07:57 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/amd64-auto.conf
ContentsMap: __init__(), search_order = ['pixz', 'lbzip2', 'isoinfo_l', 'squashfs', 'gzip', 'xz', 'bzip2', 'tar', 'isoinfo_f']
30 Oct 2015 13:07:57 UTC: NOTICE : Using target: stage2
30 Oct 2015 13:07:57 UTC: NOTICE : Source path set to /home/release/buildroot/amd64-dev/builds/hardened/stage1-amd64-hardened-selinux+nomultilib-2008.0.tar.xz
COMPRESS: __init__(), search_order = ['bzip2', 'tar', 'pixz', 'xz', 'gzip', 'lbzip2']
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
30 Oct 2015 13:08:08 UTC: NOTICE : purge(); clearing autoresume ...
30 Oct 2015 13:08:08 UTC: NOTICE : purge(); clearing chroot ...
30 Oct 2015 13:08:08 UTC: NOTICE : Clearing the chroot path ...
30 Oct 2015 13:08:08 UTC: NOTICE : purge(); clearing package cache ...
30 Oct 2015 13:08:08 UTC: NOTICE : purging the pkgcache ...
30 Oct 2015 13:08:08 UTC: NOTICE : purge(); clearing kerncache ...
30 Oct 2015 13:08:08 UTC: NOTICE : --- Running action sequence: unpack
30 Oct 2015 13:08:08 UTC: ERROR : CatalystError: File Not Found: /home/release/buildroot/amd64-dev/builds/hardened/stage1-amd64-hardened-selinux+nomultilib-2008.0.tar.xz
30 Oct 2015 13:08:08 UTC: ERROR : Exception running action sequence unpack
Traceback (most recent call last):
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1401, in run
getattr(self, x)()
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 701, in unpack
unpack_info['source'] = file_check(unpack_info['source'])
File "/usr/lib64/python2.7/site-packages/catalyst/support.py", line 74, in file_check
raise CatalystError("File Not Found: %s" % filepath)
CatalystError
30 Oct 2015 13:08:08 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /home/release/tmp/run/catalyst-auto.RxCoUK/log/hardened_stage2-selinux-nomultilib.log
^ permalink raw reply [flat|nested] 14+ messages in thread
* [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage2-selinux-nomultilib.spec
@ 2015-11-01 16:22 catalyst
0 siblings, 0 replies; 14+ messages in thread
From: catalyst @ 2015-11-01 16:22 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
01 Nov 2015 16:22:36 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/amd64-auto.conf
ContentsMap: __init__(), search_order = ['pixz', 'lbzip2', 'isoinfo_l', 'squashfs', 'gzip', 'xz', 'bzip2', 'tar', 'isoinfo_f']
01 Nov 2015 16:22:36 UTC: NOTICE : Using target: stage2
01 Nov 2015 16:22:37 UTC: NOTICE : Source path set to /home/release/buildroot/amd64-dev/builds/hardened/stage1-amd64-hardened-selinux+nomultilib-20151101
01 Nov 2015 16:22:37 UTC: WARNING : If this is not desired, remove this directory or turn off seedcache in the
01 Nov 2015 16:22:37 UTC: WARNING : options of catalyst.conf. The source path will then be:
01 Nov 2015 16:22:37 UTC: WARNING : /home/release/buildroot/amd64-dev/builds/hardened/stage1-amd64-hardened-selinux+nomultilib-20151101
COMPRESS: __init__(), search_order = ['bzip2', 'tar', 'pixz', 'xz', 'gzip', 'lbzip2']
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
01 Nov 2015 16:22:47 UTC: NOTICE : purge(); clearing autoresume ...
01 Nov 2015 16:22:47 UTC: NOTICE : purge(); clearing chroot ...
01 Nov 2015 16:22:47 UTC: NOTICE : Clearing the chroot path ...
01 Nov 2015 16:22:47 UTC: NOTICE : purge(); clearing package cache ...
01 Nov 2015 16:22:47 UTC: NOTICE : purging the pkgcache ...
01 Nov 2015 16:22:47 UTC: NOTICE : purge(); clearing kerncache ...
01 Nov 2015 16:22:47 UTC: NOTICE : --- Running action sequence: unpack
01 Nov 2015 16:22:47 UTC: ERROR : CatalystError: source path is a dir but seedcache is not enabled
01 Nov 2015 16:22:47 UTC: ERROR : Exception running action sequence unpack
Traceback (most recent call last):
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1401, in run
getattr(self, x)()
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 752, in unpack
"source path is a dir but seedcache is not enabled")
CatalystError
01 Nov 2015 16:22:47 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /home/release/tmp/run/catalyst-auto.0lqaLJ/log/hardened_stage2-selinux-nomultilib.log
^ permalink raw reply [flat|nested] 14+ messages in thread
* [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage2-selinux-nomultilib.spec
@ 2015-11-05 8:03 catalyst
0 siblings, 0 replies; 14+ messages in thread
From: catalyst @ 2015-11-05 8:03 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
05 Nov 2015 08:03:48 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/amd64-auto.conf
ContentsMap: __init__(), search_order = ['pixz', 'lbzip2', 'isoinfo_l', 'squashfs', 'gzip', 'xz', 'bzip2', 'tar', 'isoinfo_f']
05 Nov 2015 08:03:49 UTC: NOTICE : Using target: stage2
05 Nov 2015 08:03:49 UTC: NOTICE : Source path set to /home/release/buildroot/amd64-dev/builds/hardened/stage1-amd64-hardened-selinux+nomultilib-20151102
05 Nov 2015 08:03:49 UTC: WARNING : If this is not desired, remove this directory or turn off seedcache in the
05 Nov 2015 08:03:49 UTC: WARNING : options of catalyst.conf. The source path will then be:
05 Nov 2015 08:03:49 UTC: WARNING : /home/release/buildroot/amd64-dev/builds/hardened/stage1-amd64-hardened-selinux+nomultilib-20151102
COMPRESS: __init__(), search_order = ['bzip2', 'tar', 'pixz', 'xz', 'gzip', 'lbzip2']
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
05 Nov 2015 08:03:59 UTC: NOTICE : purge(); clearing autoresume ...
05 Nov 2015 08:03:59 UTC: NOTICE : purge(); clearing chroot ...
05 Nov 2015 08:03:59 UTC: NOTICE : Clearing the chroot path ...
05 Nov 2015 08:03:59 UTC: NOTICE : purge(); clearing package cache ...
05 Nov 2015 08:03:59 UTC: NOTICE : purging the pkgcache ...
05 Nov 2015 08:03:59 UTC: NOTICE : purge(); clearing kerncache ...
05 Nov 2015 08:03:59 UTC: NOTICE : --- Running action sequence: unpack
05 Nov 2015 08:03:59 UTC: ERROR : CatalystError: source path is a dir but seedcache is not enabled
05 Nov 2015 08:03:59 UTC: ERROR : Exception running action sequence unpack
Traceback (most recent call last):
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1401, in run
getattr(self, x)()
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 752, in unpack
"source path is a dir but seedcache is not enabled")
CatalystError
05 Nov 2015 08:03:59 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /home/release/tmp/run/catalyst-auto.CNNVNM/log/hardened_stage2-selinux-nomultilib.log
^ permalink raw reply [flat|nested] 14+ messages in thread
* [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage2-selinux-nomultilib.spec
@ 2015-11-09 16:10 catalyst
0 siblings, 0 replies; 14+ messages in thread
From: catalyst @ 2015-11-09 16:10 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
09 Nov 2015 16:10:10 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/amd64-auto.conf
ContentsMap: __init__(), search_order = ['pixz', 'lbzip2', 'isoinfo_l', 'squashfs', 'gzip', 'xz', 'bzip2', 'tar', 'isoinfo_f']
09 Nov 2015 16:10:10 UTC: NOTICE : Using target: stage2
09 Nov 2015 16:10:11 UTC: NOTICE : Source path set to /home/release/buildroot/amd64-dev/builds/hardened/stage1-amd64-hardened-selinux+nomultilib-20151109
09 Nov 2015 16:10:11 UTC: WARNING : If this is not desired, remove this directory or turn off seedcache in the
09 Nov 2015 16:10:11 UTC: WARNING : options of catalyst.conf. The source path will then be:
09 Nov 2015 16:10:11 UTC: WARNING : /home/release/buildroot/amd64-dev/builds/hardened/stage1-amd64-hardened-selinux+nomultilib-20151109
COMPRESS: __init__(), search_order = ['bzip2', 'tar', 'pixz', 'xz', 'gzip', 'lbzip2']
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
09 Nov 2015 16:10:21 UTC: NOTICE : purge(); clearing autoresume ...
09 Nov 2015 16:10:21 UTC: NOTICE : purge(); clearing chroot ...
09 Nov 2015 16:10:21 UTC: NOTICE : Clearing the chroot path ...
09 Nov 2015 16:10:21 UTC: NOTICE : purge(); clearing package cache ...
09 Nov 2015 16:10:21 UTC: NOTICE : purging the pkgcache ...
09 Nov 2015 16:10:21 UTC: NOTICE : purge(); clearing kerncache ...
09 Nov 2015 16:10:21 UTC: NOTICE : --- Running action sequence: unpack
09 Nov 2015 16:10:21 UTC: ERROR : CatalystError: source path is a dir but seedcache is not enabled
09 Nov 2015 16:10:21 UTC: ERROR : Exception running action sequence unpack
Traceback (most recent call last):
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1399, in run
getattr(self, x)()
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 752, in unpack
"source path is a dir but seedcache is not enabled")
CatalystError
09 Nov 2015 16:10:21 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /home/release/tmp/run/catalyst-auto.wVuCgs/log/hardened_stage2-selinux-nomultilib.log
^ permalink raw reply [flat|nested] 14+ messages in thread
* [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage2-selinux-nomultilib.spec
@ 2015-11-16 15:21 catalyst
0 siblings, 0 replies; 14+ messages in thread
From: catalyst @ 2015-11-16 15:21 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
16 Nov 2015 15:21:26 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/amd64-auto.conf
ContentsMap: __init__(), search_order = ['pixz', 'lbzip2', 'isoinfo_l', 'squashfs', 'gzip', 'xz', 'bzip2', 'tar', 'isoinfo_f']
16 Nov 2015 15:21:26 UTC: NOTICE : Using target: stage2
16 Nov 2015 15:21:26 UTC: NOTICE : Source path set to /home/release/buildroot/amd64-dev/builds/hardened/stage1-amd64-hardened-selinux+nomultilib-20151116
16 Nov 2015 15:21:26 UTC: WARNING : If this is not desired, remove this directory or turn off seedcache in the
16 Nov 2015 15:21:26 UTC: WARNING : options of catalyst.conf. The source path will then be:
16 Nov 2015 15:21:26 UTC: WARNING : /home/release/buildroot/amd64-dev/builds/hardened/stage1-amd64-hardened-selinux+nomultilib-20151116
COMPRESS: __init__(), search_order = ['bzip2', 'tar', 'pixz', 'xz', 'gzip', 'lbzip2']
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
16 Nov 2015 15:21:36 UTC: NOTICE : purge(); clearing autoresume ...
16 Nov 2015 15:21:36 UTC: NOTICE : purge(); clearing chroot ...
16 Nov 2015 15:21:36 UTC: NOTICE : Clearing the chroot path ...
16 Nov 2015 15:21:36 UTC: NOTICE : purge(); clearing package cache ...
16 Nov 2015 15:21:36 UTC: NOTICE : purging the pkgcache ...
16 Nov 2015 15:21:36 UTC: NOTICE : purge(); clearing kerncache ...
16 Nov 2015 15:21:36 UTC: NOTICE : --- Running action sequence: unpack
16 Nov 2015 15:21:36 UTC: ERROR : CatalystError: source path is a dir but seedcache is not enabled
16 Nov 2015 15:21:36 UTC: ERROR : Exception running action sequence unpack
Traceback (most recent call last):
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1399, in run
getattr(self, x)()
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 752, in unpack
"source path is a dir but seedcache is not enabled")
CatalystError
16 Nov 2015 15:21:36 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /home/release/tmp/run/catalyst-auto.pZuUIw/log/hardened_stage2-selinux-nomultilib.log
^ permalink raw reply [flat|nested] 14+ messages in thread
* [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage2-selinux-nomultilib.spec
@ 2018-09-17 19:56 catalyst
0 siblings, 0 replies; 14+ messages in thread
From: catalyst @ 2018-09-17 19:56 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 11: sed: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 11: sed: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
* /bin/bash: line 12: basename: command not found
* /bin/bash: line 16: dirname: command not found
[Errno 2] No such file or directory: b'/usr/bin/sandbox':
/usr/bin/sandbox /usr/lib/portage/python3.6/misc-functions.sh die_hooks
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/portage/process.py", line 347, in spawn
unshare_net, unshare_ipc, cgroup)
File "/usr/lib64/python3.6/site-packages/portage/process.py", line 555, in _exec
os.execve(binary, myargs, env)
File "/usr/lib64/python3.6/site-packages/portage/__init__.py", line 250, in __call__
rval = self._func(*wrapped_args, **wrapped_kwargs)
FileNotFoundError: [Errno 2] No such file or directory: b'/usr/bin/sandbox'
* The ebuild phase 'die_hooks' has exited unexpectedly. This type of
* behavior is known to be triggered by things such as failed variable
* assignments (bug #190128) or bad substitution errors (bug #200313).
* Normally, before exiting, bash should have displayed an error message
* above. If bash did not produce an error message above, it's possible
* that the ebuild has called `exit` when it should have called `die`
* instead. This behavior may also be triggered by a corrupt bash binary or
* a hardware problem such as memory or cpu malfunction. If the problem is
* not reproducible or it appears to occur randomly, then it is likely to
* be triggered by a hardware problem. If you suspect a hardware problem
* then you should try some basic hardware diagnostics such as memtest.
* Please do not report this as a bug unless it is consistently
* reproducible and you are sure that your bash binary and hardware are
* functioning properly.
* Messages for package sys-apps/baselayout-2.4.1-r2:
* The following users have non-existent shells!
* halt - /sbin/halt
* shutdown - /sbin/shutdown
* You should reboot now to get /run mounted with tmpfs!
* Messages for package sys-devel/gcc-7.3.0-r3:
* The ebuild phase 'install' has exited unexpectedly. This type of
* behavior is known to be triggered by things such as failed variable
* assignments (bug #190128) or bad substitution errors (bug #200313).
* Normally, before exiting, bash should have displayed an error message
* above. If bash did not produce an error message above, it's possible
* that the ebuild has called `exit` when it should have called `die`
* instead. This behavior may also be triggered by a corrupt bash binary or
* a hardware problem such as memory or cpu malfunction. If the problem is
* not reproducible or it appears to occur randomly, then it is likely to
* be triggered by a hardware problem. If you suspect a hardware problem
* then you should try some basic hardware diagnostics such as memtest.
* Please do not report this as a bug unless it is consistently
* reproducible and you are sure that your bash binary and hardware are
* functioning properly.
* ERROR: sys-devel/gcc-7.3.0-r3::gentoo failed (install phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-7.3.0-r3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-7.3.0-r3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-7.3.0-r3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-7.3.0-r3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-7.3.0-r3/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-7.3.0-r3/work/build'
17 Sep 2018 19:56:51 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1
17 Sep 2018 19:56:52 UTC: ERROR : CatalystError: Stage build aborting due to error.
17 Sep 2018 19:56:52 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1355, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1455, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1364, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
17 Sep 2018 19:56:52 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
4527.49user 218.24system 29:35.34elapsed 267%CPU (0avgtext+0avgdata 660040maxresident)k
0inputs+10551368outputs (0major+167655781minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20180917T030004Z.oG42j9/log/hardened_stage2-selinux-nomultilib.log
^ permalink raw reply [flat|nested] 14+ messages in thread
* [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage2-selinux-nomultilib.spec
@ 2019-07-16 9:40 catalyst
0 siblings, 0 replies; 14+ messages in thread
From: catalyst @ 2019-07-16 9:40 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/amd64-auto.conf -f hardened/stage2-selinux-nomultilib.spec
16 Jul 2019 09:39:40 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/amd64-auto.conf
16 Jul 2019 09:39:40 UTC: NOTICE : conf_values[options] = {'seedcache', 'preserve_libs', 'pkgcache', 'snapcache', 'clear-autoresume', 'bindist', 'autoresume'}
16 Jul 2019 09:39:40 UTC: NOTICE : Processing spec file: hardened/stage2-selinux-nomultilib.spec
16 Jul 2019 09:39:40 UTC: NOTICE : Using target: stage2
16 Jul 2019 09:39:40 UTC: NOTICE : Source file specification matching setting is: loose
16 Jul 2019 09:39:40 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
16 Jul 2019 09:39:40 UTC: NOTICE : Source path set to /release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-selinux+nomultilib-20190715T232030Z/
16 Jul 2019 09:39:40 UTC: NOTICE : Removing AutoResume Points ...
16 Jul 2019 09:39:40 UTC: NOTICE : Emptying directory: /release/buildroot/amd64-dev/tmp/hardened/.autoresume-stage2-amd64-hardened-selinux+nomultilib-20190715T232030Z
16 Jul 2019 09:39:40 UTC: NOTICE : --- Running action sequence: unpack
16 Jul 2019 09:39:40 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
16 Jul 2019 09:39:40 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
16 Jul 2019 09:39:40 UTC: NOTICE : Removing AutoResume Points ...
16 Jul 2019 09:39:40 UTC: NOTICE : Emptying directory: /release/buildroot/amd64-dev/tmp/hardened/.autoresume-stage2-amd64-hardened-selinux+nomultilib-20190715T232030Z
16 Jul 2019 09:39:40 UTC: NOTICE : Clearing the chroot path ...
16 Jul 2019 09:39:40 UTC: NOTICE : Emptying directory: /release/buildroot/amd64-dev/tmp/hardened/stage2-amd64-hardened-selinux+nomultilib-20190715T232030Z
16 Jul 2019 09:39:40 UTC: NOTICE : Starting rsync from /release/buildroot/amd64-dev/tmp/hardened/stage1-amd64-hardened-selinux+nomultilib-20190715T232030Z/
16 Jul 2019 09:39:40 UTC: NOTICE : to /release/buildroot/amd64-dev/tmp/hardened/stage2-amd64-hardened-selinux+nomultilib-20190715T232030Z (this may take some time) ..
16 Jul 2019 09:39:43 UTC: NOTICE : --- Running action sequence: unpack_snapshot
16 Jul 2019 09:39:43 UTC: NOTICE : --- Running action sequence: setup_confdir
16 Jul 2019 09:39:43 UTC: NOTICE : --- Running action sequence: portage_overlay
16 Jul 2019 09:39:43 UTC: NOTICE : --- Running action sequence: base_dirs
16 Jul 2019 09:39:43 UTC: NOTICE : --- Running action sequence: bind
16 Jul 2019 09:39:43 UTC: NOTICE : --- Running action sequence: chroot_setup
16 Jul 2019 09:39:43 UTC: NOTICE : Setting up chroot...
16 Jul 2019 09:39:43 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
16 Jul 2019 09:39:43 UTC: WARNING : If your build fails look here first as the possible problem.
16 Jul 2019 09:39:43 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
16 Jul 2019 09:39:43 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
16 Jul 2019 09:39:43 UTC: WARNING : You have been warned.
16 Jul 2019 09:39:43 UTC: NOTICE : Writing the stage make.conf to: /release/buildroot/amd64-dev/tmp/hardened/stage2-amd64-hardened-selinux+nomultilib-20190715T232030Z/etc/portage/make.conf
16 Jul 2019 09:39:43 UTC: NOTICE : STICKY-CONFIG is enabled
16 Jul 2019 09:39:43 UTC: NOTICE : --- Running action sequence: setup_environment
16 Jul 2019 09:39:43 UTC: NOTICE : --- Running action sequence: run_local
Copying stage2-chroot.sh to /tmp
copying stage2-chroot.sh to /release/buildroot/amd64-dev/tmp/hardened/stage2-amd64-hardened-selinux+nomultilib-20190715T232030Z/tmp
copying chroot-functions.sh to /release/buildroot/amd64-dev/tmp/hardened/stage2-amd64-hardened-selinux+nomultilib-20190715T232030Z/tmp
Ensure the file has the executable bit set
Running stage2-chroot.sh in chroot:
chroot /release/buildroot/amd64-dev/tmp/hardened/stage2-amd64-hardened-selinux+nomultilib-20190715T232030Z /tmp/stage2-chroot.sh
>>> Regenerating /etc/ld.so.cache...
^[(B^[[m^[[1m^[[32mGentoo Linux; ^[(B^[[m^[[1m^[[34mhttp://www.gentoo.org/^[(B^[[m
Copyright 1999-$ Gentoo Foundation; Distributed under the GPLv2
-------------------------------------------------------------------------------
[[ (0/3) Locating packages ]]
^[(B^[[m^[[1m^[[32m*^[(B^[[m Using baselayout : >=sys-apps/baselayout-2
^[(B^[[m^[[1m^[[32m*^[(B^[[m Using portage : portage
^[(B^[[m^[[1m^[[32m*^[(B^[[m Using os-headers : >=sys-kernel/linux-headers-4.14-r1
^[(B^[[m^[[1m^[[32m*^[(B^[[m Using binutils : sys-devel/binutils
^[(B^[[m^[[1m^[[32m*^[(B^[[m Using gcc : sys-devel/gcc
^[(B^[[m^[[1m^[[32m*^[(B^[[m Using gettext : gettext
^[(B^[[m^[[1m^[[32m*^[(B^[[m Using libc : virtual/libc
^[(B^[[m^[[1m^[[32m*^[(B^[[m Using texinfo : sys-apps/texinfo
^[(B^[[m^[[1m^[[32m*^[(B^[[m Using zlib : zlib
^[(B^[[m^[[1m^[[32m*^[(B^[[m Using ncurses : ncurses
-------------------------------------------------------------------------------
[[ (1/3) Configuring environment ]]
-------------------------------------------------------------------------------
[[ (2/3) Updating portage ]]
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Running pre-merge checks for sys-apps/portage-2.3.66-r1
* Determining the location of the kernel source code
* Unable to find kernel sources at /usr/src/linux
* Please make sure that /usr/src/linux points at your running kernel,
* (or the kernel you wish to build against).
* Alternatively, set the KERNEL_DIR environment variable to the kernel sources location
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Checking for suitable kernel configuration options...
[ ok ]
>>> Emerging binary (1 of 1) sys-apps/portage-2.3.66-r1::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.66-r1::gentoo
* Messages for package sys-apps/portage-2.3.66-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
-------------------------------------------------------------------------------
[[ (3/3) Emerging packages ]]
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-devel/gcc-8.3.0-r1
>>> Emerging binary (1 of 13) sys-libs/zlib-1.2.11-r2::gentoo
>>> Installing (1 of 13) sys-libs/zlib-1.2.11-r2::gentoo
>>> Emerging binary (2 of 13) sys-apps/baselayout-2.6-r1::gentoo
>>> Failed to emerge sys-apps/baselayout-2.6-r1
* Messages for package sys-apps/baselayout-2.6-r1:
* Converting /lib from a dir to a symlink
* ERROR: sys-apps/baselayout-2.6-r1::gentoo failed (setup phase):
* non-empty dir found where we needed a symlink: /lib
*
* Call stack:
* ebuild.sh, line 124: Called pkg_setup
* environment, line 1458: Called multilib_layout
* environment, line 1289: Called die
* The specific snippet of code:
* die "non-empty dir found where we needed a symlink: ${prefix}lib";
*
* If you need support, post the output of `emerge --info '=sys-apps/baselayout-2.6-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/baselayout-2.6-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/baselayout-2.6-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/baselayout-2.6-r1/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/baselayout-2.6-r1/homedir'
* S: '/var/tmp/portage/sys-apps/baselayout-2.6-r1/work/baselayout-2.6'
16 Jul 2019 09:40:20 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1
16 Jul 2019 09:40:20 UTC: ERROR : CatalystError: Stage build aborting due to error.
16 Jul 2019 09:40:20 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1360, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
16 Jul 2019 09:40:20 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
30.84user 7.53system 0:40.88elapsed 93%CPU (0avgtext+0avgdata 54952maxresident)k
200inputs+1140616outputs (1major+849621minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20190715T232030Z.3BPwpf/log/hardened_stage2-selinux-nomultilib.log
^ permalink raw reply [flat|nested] 14+ messages in thread
* [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage2-selinux-nomultilib.spec
@ 2019-07-16 19:25 catalyst
0 siblings, 0 replies; 14+ messages in thread
From: catalyst @ 2019-07-16 19:25 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/amd64-auto.conf -f hardened/stage2-selinux-nomultilib.spec
16 Jul 2019 19:24:26 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/amd64-auto.conf
16 Jul 2019 19:24:26 UTC: NOTICE : conf_values[options] = {'bindist', 'clear-autoresume', 'pkgcache', 'preserve_libs'}
16 Jul 2019 19:24:26 UTC: NOTICE : Processing spec file: hardened/stage2-selinux-nomultilib.spec
16 Jul 2019 19:24:27 UTC: NOTICE : Using target: stage2
16 Jul 2019 19:24:27 UTC: NOTICE : Source file specification matching setting is: loose
16 Jul 2019 19:24:27 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
16 Jul 2019 19:24:27 UTC: NOTICE : Source path set to /home/release/buildroot/amd64-dev/builds/hardened/stage1-amd64-hardened-selinux+nomultilib-20190716T102132Z.tar.xz
16 Jul 2019 19:24:27 UTC: NOTICE : --- Running action sequence: unpack
16 Jul 2019 19:24:27 UTC: NOTICE : Clearing the chroot path ...
16 Jul 2019 19:24:27 UTC: NOTICE : Emptying directory: /home/release/buildroot/amd64-dev/tmp/hardened/stage2-amd64-hardened-selinux+nomultilib-20190716T102132Z
16 Jul 2019 19:24:27 UTC: NOTICE : Starting auto from /home/release/buildroot/amd64-dev/builds/hardened/stage1-amd64-hardened-selinux+nomultilib-20190716T102132Z.tar.xz
16 Jul 2019 19:24:27 UTC: NOTICE : to /home/release/buildroot/amd64-dev/tmp/hardened/stage2-amd64-hardened-selinux+nomultilib-20190716T102132Z (this may take some time) ..
16 Jul 2019 19:24:29 UTC: NOTICE : --- Running action sequence: unpack_snapshot
16 Jul 2019 19:24:29 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
16 Jul 2019 19:24:38 UTC: NOTICE : --- Running action sequence: setup_confdir
16 Jul 2019 19:24:38 UTC: NOTICE : --- Running action sequence: portage_overlay
16 Jul 2019 19:24:38 UTC: NOTICE : --- Running action sequence: base_dirs
16 Jul 2019 19:24:38 UTC: NOTICE : --- Running action sequence: bind
16 Jul 2019 19:24:38 UTC: NOTICE : --- Running action sequence: chroot_setup
16 Jul 2019 19:24:38 UTC: NOTICE : Setting up chroot...
16 Jul 2019 19:24:38 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
16 Jul 2019 19:24:38 UTC: WARNING : If your build fails look here first as the possible problem.
16 Jul 2019 19:24:38 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
16 Jul 2019 19:24:38 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
16 Jul 2019 19:24:38 UTC: WARNING : You have been warned.
16 Jul 2019 19:24:38 UTC: NOTICE : Writing the stage make.conf to: /home/release/buildroot/amd64-dev/tmp/hardened/stage2-amd64-hardened-selinux+nomultilib-20190716T102132Z/etc/portage/make.conf
16 Jul 2019 19:24:38 UTC: NOTICE : STICKY-CONFIG is enabled
16 Jul 2019 19:24:38 UTC: NOTICE : --- Running action sequence: setup_environment
16 Jul 2019 19:24:38 UTC: NOTICE : --- Running action sequence: run_local
Copying stage2-chroot.sh to /tmp
copying stage2-chroot.sh to /home/release/buildroot/amd64-dev/tmp/hardened/stage2-amd64-hardened-selinux+nomultilib-20190716T102132Z/tmp
copying chroot-functions.sh to /home/release/buildroot/amd64-dev/tmp/hardened/stage2-amd64-hardened-selinux+nomultilib-20190716T102132Z/tmp
Ensure the file has the executable bit set
Running stage2-chroot.sh in chroot:
chroot /home/release/buildroot/amd64-dev/tmp/hardened/stage2-amd64-hardened-selinux+nomultilib-20190716T102132Z /tmp/stage2-chroot.sh
>>> Regenerating /etc/ld.so.cache...
^[(B^[[m^[[1m^[[32mGentoo Linux; ^[(B^[[m^[[1m^[[34mhttp://www.gentoo.org/^[(B^[[m
Copyright 1999-$ Gentoo Foundation; Distributed under the GPLv2
-------------------------------------------------------------------------------
[[ (0/3) Locating packages ]]
^[(B^[[m^[[1m^[[32m*^[(B^[[m Using baselayout : >=sys-apps/baselayout-2
^[(B^[[m^[[1m^[[32m*^[(B^[[m Using portage : portage
^[(B^[[m^[[1m^[[32m*^[(B^[[m Using os-headers : >=sys-kernel/linux-headers-4.14-r1
^[(B^[[m^[[1m^[[32m*^[(B^[[m Using binutils : sys-devel/binutils
^[(B^[[m^[[1m^[[32m*^[(B^[[m Using gcc : sys-devel/gcc
^[(B^[[m^[[1m^[[32m*^[(B^[[m Using gettext : gettext
^[(B^[[m^[[1m^[[32m*^[(B^[[m Using libc : virtual/libc
^[(B^[[m^[[1m^[[32m*^[(B^[[m Using texinfo : sys-apps/texinfo
^[(B^[[m^[[1m^[[32m*^[(B^[[m Using zlib : zlib
^[(B^[[m^[[1m^[[32m*^[(B^[[m Using ncurses : ncurses
-------------------------------------------------------------------------------
[[ (1/3) Configuring environment ]]
-------------------------------------------------------------------------------
[[ (2/3) Updating portage ]]
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Running pre-merge checks for sys-apps/portage-2.3.66-r1
* Determining the location of the kernel source code
* Unable to find kernel sources at /usr/src/linux
* Please make sure that /usr/src/linux points at your running kernel,
* (or the kernel you wish to build against).
* Alternatively, set the KERNEL_DIR environment variable to the kernel sources location
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Checking for suitable kernel configuration options...
[ ok ]
>>> Emerging binary (1 of 1) sys-apps/portage-2.3.66-r1::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.66-r1::gentoo
* Messages for package sys-apps/portage-2.3.66-r1:
* Log file: /home/release/tmp/logs/sys-apps:portage-2.3.66-r1:20190716-192443.log
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
-------------------------------------------------------------------------------
[[ (3/3) Emerging packages ]]
>>> Running pre-merge checks for sys-devel/gcc-8.3.0-r1
>>> Emerging binary (1 of 12) sys-libs/zlib-1.2.11-r2::gentoo
>>> Installing (1 of 12) sys-libs/zlib-1.2.11-r2::gentoo
>>> Emerging binary (2 of 12) sys-apps/baselayout-2.6-r1::gentoo
>>> Failed to emerge sys-apps/baselayout-2.6-r1, Log file:
>>> '/home/release/tmp/logs/sys-apps:baselayout-2.6-r1:20190716-192507.log'
>>> Extracting info
* Package: sys-apps/baselayout-2.6-r1
* Repository: gentoo
* USE: split-usr elibc_glibc abi_x86_64 kernel_linux userland_GNU amd64
* FEATURES: network-sandbox preserve-libs sandbox selinux sesandbox userpriv usersandbox
* Converting /lib from a dir to a symlink
* ERROR: sys-apps/baselayout-2.6-r1::gentoo failed (setup phase):
* non-empty dir found where we needed a symlink: /lib
*
* Call stack:
* ebuild.sh, line 124: Called pkg_setup
* environment, line 1455: Called multilib_layout
* environment, line 1286: Called die
* The specific snippet of code:
* die "non-empty dir found where we needed a symlink: ${prefix}lib";
*
* If you need support, post the output of `emerge --info '=sys-apps/baselayout-2.6-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/baselayout-2.6-r1::gentoo'`.
* The complete build log is located at '/home/release/tmp/logs/sys-apps:baselayout-2.6-r1:20190716-192507.log'.
* For convenience, a symlink to the build log is located at '/var/tmp/portage/sys-apps/baselayout-2.6-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/baselayout-2.6-r1/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/baselayout-2.6-r1/homedir'
* S: '/var/tmp/portage/sys-apps/baselayout-2.6-r1/work/baselayout-2.6'
* Messages for package sys-apps/baselayout-2.6-r1:
* Log file: /home/release/tmp/logs/sys-apps:baselayout-2.6-r1:20190716-192507.log
* Converting /lib from a dir to a symlink
* ERROR: sys-apps/baselayout-2.6-r1::gentoo failed (setup phase):
* non-empty dir found where we needed a symlink: /lib
*
* Call stack:
* ebuild.sh, line 124: Called pkg_setup
* environment, line 1455: Called multilib_layout
* environment, line 1286: Called die
* The specific snippet of code:
* die "non-empty dir found where we needed a symlink: ${prefix}lib";
*
* If you need support, post the output of `emerge --info '=sys-apps/baselayout-2.6-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/baselayout-2.6-r1::gentoo'`.
* The complete build log is located at '/home/release/tmp/logs/sys-apps:baselayout-2.6-r1:20190716-192507.log'.
* For convenience, a symlink to the build log is located at '/var/tmp/portage/sys-apps/baselayout-2.6-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/baselayout-2.6-r1/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/baselayout-2.6-r1/homedir'
* S: '/var/tmp/portage/sys-apps/baselayout-2.6-r1/work/baselayout-2.6'
16 Jul 2019 19:25:08 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1
16 Jul 2019 19:25:08 UTC: ERROR : CatalystError: Stage build aborting due to error.
16 Jul 2019 19:25:08 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1360, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
16 Jul 2019 19:25:08 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
29.48user 4.64system 0:41.68elapsed 81%CPU (0avgtext+0avgdata 328632maxresident)k
8inputs+2353600outputs (0major+977994minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20190716T102132Z.ae9vp0/log/hardened_stage2-selinux-nomultilib.log
^ permalink raw reply [flat|nested] 14+ messages in thread
* [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage2-selinux-nomultilib.spec
@ 2019-07-22 11:17 catalyst
0 siblings, 0 replies; 14+ messages in thread
From: catalyst @ 2019-07-22 11:17 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/amd64-auto.conf -f hardened/stage2-selinux-nomultilib.spec
22 Jul 2019 11:17:01 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/amd64-auto.conf
22 Jul 2019 11:17:01 UTC: NOTICE : conf_values[options] = {'pkgcache', 'preserve_libs', 'clear-autoresume', 'bindist'}
22 Jul 2019 11:17:01 UTC: NOTICE : Processing spec file: hardened/stage2-selinux-nomultilib.spec
22 Jul 2019 11:17:01 UTC: NOTICE : Using target: stage2
22 Jul 2019 11:17:01 UTC: NOTICE : Source file specification matching setting is: loose
22 Jul 2019 11:17:01 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
22 Jul 2019 11:17:02 UTC: NOTICE : Source path set to /home/release/buildroot/amd64-dev/builds/hardened/stage1-amd64-hardened-selinux+nomultilib-20190722T030003Z.tar.xz
22 Jul 2019 11:17:02 UTC: NOTICE : --- Running action sequence: unpack
22 Jul 2019 11:17:02 UTC: NOTICE : Clearing the chroot path ...
22 Jul 2019 11:17:02 UTC: NOTICE : Emptying directory: /home/release/buildroot/amd64-dev/tmp/hardened/stage2-amd64-hardened-selinux+nomultilib-20190722T030003Z
22 Jul 2019 11:17:02 UTC: NOTICE : Starting auto from /home/release/buildroot/amd64-dev/builds/hardened/stage1-amd64-hardened-selinux+nomultilib-20190722T030003Z.tar.xz
22 Jul 2019 11:17:02 UTC: NOTICE : to /home/release/buildroot/amd64-dev/tmp/hardened/stage2-amd64-hardened-selinux+nomultilib-20190722T030003Z (this may take some time) ..
22 Jul 2019 11:17:03 UTC: NOTICE : --- Running action sequence: unpack_snapshot
22 Jul 2019 11:17:03 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
22 Jul 2019 11:17:13 UTC: NOTICE : --- Running action sequence: setup_confdir
22 Jul 2019 11:17:13 UTC: NOTICE : --- Running action sequence: portage_overlay
22 Jul 2019 11:17:13 UTC: NOTICE : --- Running action sequence: base_dirs
22 Jul 2019 11:17:13 UTC: NOTICE : --- Running action sequence: bind
22 Jul 2019 11:17:13 UTC: NOTICE : --- Running action sequence: chroot_setup
22 Jul 2019 11:17:13 UTC: NOTICE : Setting up chroot...
22 Jul 2019 11:17:13 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
22 Jul 2019 11:17:13 UTC: WARNING : If your build fails look here first as the possible problem.
22 Jul 2019 11:17:13 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
22 Jul 2019 11:17:13 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
22 Jul 2019 11:17:13 UTC: WARNING : You have been warned.
22 Jul 2019 11:17:13 UTC: NOTICE : Writing the stage make.conf to: /home/release/buildroot/amd64-dev/tmp/hardened/stage2-amd64-hardened-selinux+nomultilib-20190722T030003Z/etc/portage/make.conf
22 Jul 2019 11:17:13 UTC: NOTICE : STICKY-CONFIG is enabled
22 Jul 2019 11:17:13 UTC: NOTICE : --- Running action sequence: setup_environment
22 Jul 2019 11:17:13 UTC: NOTICE : --- Running action sequence: run_local
Copying stage2-chroot.sh to /tmp
copying stage2-chroot.sh to /home/release/buildroot/amd64-dev/tmp/hardened/stage2-amd64-hardened-selinux+nomultilib-20190722T030003Z/tmp
copying chroot-functions.sh to /home/release/buildroot/amd64-dev/tmp/hardened/stage2-amd64-hardened-selinux+nomultilib-20190722T030003Z/tmp
Ensure the file has the executable bit set
Running stage2-chroot.sh in chroot:
chroot /home/release/buildroot/amd64-dev/tmp/hardened/stage2-amd64-hardened-selinux+nomultilib-20190722T030003Z /tmp/stage2-chroot.sh
>>> Regenerating /etc/ld.so.cache...
Gentoo Linux; http://www.gentoo.org/
Copyright 1999-$ Gentoo Foundation; Distributed under the GPLv2
-------------------------------------------------------------------------------
[[ (0/3) Locating packages ]]
* Using baselayout : >=sys-apps/baselayout-2
* Using portage : portage
* Using os-headers : >=sys-kernel/linux-headers-4.14-r1
* Using binutils : sys-devel/binutils
* Using gcc : sys-devel/gcc
* Using gettext : gettext
* Using libc : virtual/libc
* Using texinfo : sys-apps/texinfo
* Using zlib : zlib
* Using ncurses : ncurses
-------------------------------------------------------------------------------
[[ (1/3) Configuring environment ]]
-------------------------------------------------------------------------------
[[ (2/3) Updating portage ]]
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Running pre-merge checks for sys-apps/portage-2.3.66-r1
* Determining the location of the kernel source code
* Unable to find kernel sources at /usr/src/linux
* Please make sure that /usr/src/linux points at your running kernel,
* (or the kernel you wish to build against).
* Alternatively, set the KERNEL_DIR environment variable to the kernel sources location
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Checking for suitable kernel configuration options...
[ ok ]
>>> Emerging binary (1 of 1) sys-apps/portage-2.3.66-r1::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.66-r1::gentoo
* Messages for package sys-apps/portage-2.3.66-r1:
* Log file: /home/release/tmp/logs/sys-apps:portage-2.3.66-r1:20190722-111729.log
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
-------------------------------------------------------------------------------
[[ (3/3) Emerging packages ]]
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-devel/gcc-8.3.0-r1
>>> Emerging binary (1 of 13) sys-apps/baselayout-2.6-r1::gentoo
>>> Failed to emerge sys-apps/baselayout-2.6-r1, Log file:
>>> '/home/release/tmp/logs/sys-apps:baselayout-2.6-r1:20190722-111745.log'
>>> Extracting info
* Package: sys-apps/baselayout-2.6-r1
* Repository: gentoo
* USE: amd64 kernel_linux abi_x86_64 split-usr userland_GNU elibc_glibc
* FEATURES: network-sandbox preserve-libs sandbox selinux sesandbox userpriv usersandbox
* Converting /lib from a dir to a symlink
* ERROR: sys-apps/baselayout-2.6-r1::gentoo failed (setup phase):
* non-empty dir found where we needed a symlink: /lib
*
* Call stack:
* ebuild.sh, line 124: Called pkg_setup
* environment, line 1455: Called multilib_layout
* environment, line 1286: Called die
* The specific snippet of code:
* die "non-empty dir found where we needed a symlink: ${prefix}lib";
*
* If you need support, post the output of `emerge --info '=sys-apps/baselayout-2.6-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/baselayout-2.6-r1::gentoo'`.
* The complete build log is located at '/home/release/tmp/logs/sys-apps:baselayout-2.6-r1:20190722-111745.log'.
* For convenience, a symlink to the build log is located at '/var/tmp/portage/sys-apps/baselayout-2.6-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/baselayout-2.6-r1/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/baselayout-2.6-r1/homedir'
* S: '/var/tmp/portage/sys-apps/baselayout-2.6-r1/work/baselayout-2.6'
* Messages for package sys-apps/baselayout-2.6-r1:
* Log file: /home/release/tmp/logs/sys-apps:baselayout-2.6-r1:20190722-111745.log
* Converting /lib from a dir to a symlink
* ERROR: sys-apps/baselayout-2.6-r1::gentoo failed (setup phase):
* non-empty dir found where we needed a symlink: /lib
*
* Call stack:
* ebuild.sh, line 124: Called pkg_setup
* environment, line 1455: Called multilib_layout
* environment, line 1286: Called die
* The specific snippet of code:
* die "non-empty dir found where we needed a symlink: ${prefix}lib";
*
* If you need support, post the output of `emerge --info '=sys-apps/baselayout-2.6-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/baselayout-2.6-r1::gentoo'`.
* The complete build log is located at '/home/release/tmp/logs/sys-apps:baselayout-2.6-r1:20190722-111745.log'.
* For convenience, a symlink to the build log is located at '/var/tmp/portage/sys-apps/baselayout-2.6-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/baselayout-2.6-r1/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/baselayout-2.6-r1/homedir'
* S: '/var/tmp/portage/sys-apps/baselayout-2.6-r1/work/baselayout-2.6'
22 Jul 2019 11:17:46 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1
22 Jul 2019 11:17:46 UTC: ERROR : CatalystError: Stage build aborting due to error.
22 Jul 2019 11:17:46 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1360, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1369, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
22 Jul 2019 11:17:46 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
28.03user 3.72system 0:44.66elapsed 71%CPU (0avgtext+0avgdata 328596maxresident)k
8inputs+2349272outputs (0major+723330minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20190722T030003Z.lhgS1k/log/hardened_stage2-selinux-nomultilib.log
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2019-07-22 11:17 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-10-29 11:37 [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - hardened/stage2-selinux-nomultilib.spec catalyst
-- strict thread matches above, loose matches on Subject: below --
2019-07-22 11:17 catalyst
2019-07-16 19:25 catalyst
2019-07-16 9:40 catalyst
2018-09-17 19:56 catalyst
2015-11-16 15:21 catalyst
2015-11-09 16:10 catalyst
2015-11-05 8:03 catalyst
2015-11-01 16:22 catalyst
2015-10-30 13:08 catalyst
2015-10-26 11:49 catalyst
2015-10-24 9:28 catalyst
2015-10-23 12:39 catalyst
2015-03-02 20:19 catalyst
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox