From: catalyst@timberdoodle.ppc64.dev.gentoo.org
To: releng@gentoo.org,gentoo-releng-autobuilds@lists.gentoo.org
Subject: [gentoo-releng-autobuilds] [ppc64-auto] Catalyst fatal build error - stage1-32ul.spec
Date: Sun, 21 Jun 2015 07:32:06 -0700 [thread overview]
Message-ID: <20150621143946.1D04114017@pigeon.gentoo.org> (raw)
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-ppc64-32ul-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-ppc64-32ul-20150621/ (This may take some time) ...
tar: XATTR support is not available
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20150621/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: XATTR support is not available
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20150621/.catalyst_lock'
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-ppc64-32ul-20150621///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-ppc64-32ul-20150621//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-ppc64-32ul-20150621//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-ppc64-32ul-20150621/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
@
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) dev-lang/python-exec-2.0.1-r1
>>> Installing (1 of 2) dev-lang/python-exec-2.0.1-r1
>>> Emerging (2 of 2) sys-apps/portage-2.2.18
>>> Installing (2 of 2) sys-apps/portage-2.2.18
* Messages for package sys-apps/portage-2.2.18:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
Skipping seed stage update...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/binutils sys-apps/file sys-apps/findutils sys-devel/automake sys-devel/gcc app-arch/bzip2 sys-devel/make virtual/shadow virtual/package-manager virtual/libc app-shells/bash net-misc/rsync sys-devel/bison sys-apps/which sys-devel/gnuconfig sys-apps/coreutils sys-devel/patch virtual/os-headers virtual/editor app-arch/tar app-arch/xz-utils sys-apps/diffutils sys-apps/net-tools sys-apps/sed sys-apps/less sys-devel/flex sys-apps/makedev net-misc/wget sys-apps/grep virtual/pkgconfig app-arch/gzip sys-devel/autoconf sys-apps/baselayout sys-apps/gawk sys-devel/libtool sys-devel/gettext
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r3 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20150304 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.8 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.0.8 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2015b to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[binary N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.4.2-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.0-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-9 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-5.1.3-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.21 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-4-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.6-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20130513023548 to /tmp/stage1root/
[ebuild N ] sys-apps/less-458 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.2_p10 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.4.3 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.2-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.24-r3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.4 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-3.18 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r3 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild U ] sys-libs/readline-6.3_p8-r2 [6.2_p5-r1]
[ebuild N ] sys-libs/glibc-2.20-r2 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r2 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p33-r2 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.3.6 to /tmp/stage1root/
[ebuild NS ] sys-devel/automake-1.14.1 [1.13.4]
[ebuild N ] sys-devel/automake-1.14.1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.56 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.9-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.3.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.18 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.19 to /tmp/stage1root/
[ebuild N ] app-admin/python-updater-0.11 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.8.4 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] virtual/libc-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.16 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.3 to /tmp/stage1root/
[blocks B ] <sys-devel/libtool-2.4.3-r2:2 ("<sys-devel/libtool-2.4.3-r2:2" is blocking dev-libs/libltdl-2.4.6)
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
(dev-libs/libltdl-2.4.6:0/0::gentoo, ebuild scheduled for merge) pulled in by
dev-libs/libltdl:0 required by (sys-devel/libtool-2.4.6:2/2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
(sys-devel/libtool-2.4.2-r1:2/2::gentoo, installed) pulled in by
>=sys-devel/libtool-2.4 required by (dev-libs/iniparser-3.1-r1:0/0::gentoo, ebuild scheduled for merge)
sys-devel/libtool required by (dev-libs/iniparser-3.1-r1:0/0::gentoo, ebuild scheduled for merge)
sys-devel/libtool required by (dev-libs/iniparser-3.1-r1:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
>=sys-devel/libtool-2.4 required by (dev-libs/libxml2-2.9.2-r1:2/2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
>=sys-devel/libtool-2.4 required by (dev-libs/iniparser-3.1-r1:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
>=sys-devel/libtool-2.4 required by (net-misc/wget-1.16:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ppc64-32ul-20150621/.catalyst_lock'
Full build log at /tmp/catalyst-auto.gxMNIn/log/stage1-32ul.log
next reply other threads:[~2015-06-21 14:39 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-21 14:32 catalyst [this message]
-- strict thread matches above, loose matches on Subject: below --
2016-03-17 0:49 [gentoo-releng-autobuilds] [ppc64-auto] Catalyst fatal build error - stage1-32ul.spec catalyst
2016-03-17 0:44 catalyst
2016-03-17 0:14 catalyst
2016-03-13 15:31 catalyst
2016-03-06 16:26 catalyst
2016-02-28 16:28 catalyst
2016-02-21 16:46 catalyst
2016-02-14 16:34 catalyst
2016-02-07 16:21 catalyst
2016-01-31 16:39 catalyst
2016-01-24 16:48 catalyst
2016-01-17 16:15 catalyst
2016-01-10 16:10 catalyst
2016-01-03 15:58 catalyst
2015-12-27 16:10 catalyst
2015-12-20 15:59 catalyst
2015-12-13 16:10 catalyst
2015-12-06 16:16 catalyst
2015-11-22 16:01 catalyst
2015-11-08 16:17 catalyst
2015-11-01 17:09 catalyst
2015-10-25 15:10 catalyst
2015-10-18 14:59 catalyst
2015-10-11 15:01 catalyst
2015-10-04 16:35 catalyst
2015-09-27 14:57 catalyst
2015-09-20 14:57 catalyst
2015-09-13 14:53 catalyst
2015-09-06 15:39 catalyst
2015-08-30 15:42 catalyst
2015-08-23 14:38 catalyst
2015-08-16 14:44 catalyst
2015-08-09 14:41 catalyst
2015-08-02 14:45 catalyst
2015-07-26 14:51 catalyst
2015-07-19 14:32 catalyst
2015-07-12 14:28 catalyst
2015-07-05 14:28 catalyst
2015-06-28 14:35 catalyst
2015-06-07 15:00 catalyst
2015-05-31 14:25 catalyst
2015-05-24 15:12 catalyst
2015-05-10 14:26 catalyst
2015-05-03 14:25 catalyst
2015-04-26 15:35 catalyst
2015-04-19 14:40 catalyst
2015-04-12 14:13 catalyst
2015-04-05 15:03 catalyst
2015-03-29 14:13 catalyst
2015-03-22 14:40 catalyst
2015-03-15 14:26 catalyst
2015-03-08 16:04 catalyst
2011-02-13 19:52 catalyst
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150621143946.1D04114017@pigeon.gentoo.org \
--to=catalyst@timberdoodle.ppc64.dev.gentoo.org \
--cc=gentoo-releng-autobuilds@lists.gentoo.org \
--cc=releng@gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox