[gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - hppa1.1/stage1.spec

[catalyst@hake.hppa.dev.gentoo.org]

 * or equivalent before restarting any services or this host.

 * Messages for package sys-apps/util-linux-2.25.2-r2:

 * The mesg/wall/write tools have been disabled due to USE=-tty-helpers.

 * Messages for package sys-apps/busybox-1.23.1-r1:

 * Could not locate user configfile, so we will save a default one
 * You cannot have USE='static pam'.  Assuming static is more important.
 * Your configuration for sys-apps/busybox-1.23.1-r1 has been saved in 
 * /etc/portage/savedconfig/sys-apps/busybox-1.23.1-r1 for your editing pleasure.
 * You can edit these files by hand and remerge this package with
 * USE=savedconfig to customise the configuration.
 * You can rename this file/directory to one of the following for
 * its configuration to apply to multiple versions:
 * ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
 * [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]

 * Messages for package sys-fs/udev-216:

 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 *   CONFIG_IDE:	 should not be set. But it is.
 * Please check to make sure these options are set correctly.
 * Failure to do so may cause unexpected problems.
 * 
 * Starting from version >= 197 the new predictable network interface names are
 * used by default, see:
 * http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
 * http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
 * 
 * Example command to get the information for the new interface name before booting
 * (replace <ifname> with, for example, eth0):
 * # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
 * 
 * You can use either kernel parameter "net.ifnames=0", create empty
 * file /etc/systemd/network/99-default.link, or symlink it to /dev/null
 * to disable the feature.
 * 
 * You need to restart udev as soon as possible to make the upgrade go
 * into effect.
 * The method you use to do this depends on your init system.
 * For sys-apps/openrc users it is:
 * # /etc/init.d/udev --nodeps restart
 * 
 * For more information on udev on Gentoo, upgrading, writing udev rules, and
 * fixing known issues visit:
 * http://wiki.gentoo.org/wiki/Udev
 * http://wiki.gentoo.org/wiki/Udev/upgrade
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/

 * Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:

 * Initializing /tmp/stage1root/lib as a dir
 * Initializing /tmp/stage1root/usr/lib as a dir
 * Initializing /tmp/stage1root/usr/local/lib as a dir
 * Your system profile has SYMLINK_LIB=no, so that means you need to
 * have these paths configured as follows:
 * directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
 * The ebuild will attempt to fix these, but only for trivial conversions.
 * If things fail, you will need to manually create/move the directories.
 * Converting /tmp/stage1root/lib from a symlink to a dir
 * Converting /tmp/stage1root/usr/lib from a symlink to a dir
 * Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep virtual/shadow virtual/pkgconfig sys-devel/binutils app-shells/bash sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc 
[ebuild  N    ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild  N    ] sys-libs/ncurses-5.9-r3 to /tmp/stage1root/
[ebuild  N    ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild  N    ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild  N    ] sys-devel/gnuconfig-20150304 to /tmp/stage1root/
[ebuild  N    ] virtual/libintl-0-r1 to /tmp/stage1root/
[ebuild  N    ] app-arch/xz-utils-5.0.8 to /tmp/stage1root/
[ebuild  N    ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild  N    ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild  N    ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild  N    ] sys-libs/timezone-data-2015b to /tmp/stage1root/
[ebuild  N    ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild  N    ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild  N    ] sys-apps/gentoo-functions-0.8 to /tmp/stage1root/
[ebuild  N    ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild  N    ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild  N    ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild  N    ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild  N    ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild  N    ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild  N    ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild  N    ] sys-apps/findutils-4.4.2-r1 to /tmp/stage1root/
[ebuild  N    ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild  N    ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild   R   ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild  N    ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild  N    ] dev-libs/expat-2.1.0-r4 to /tmp/stage1root/
[ebuild  N    ] sys-devel/automake-wrapper-9 to /tmp/stage1root/
[ebuild  N    ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild  N    ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild  N    ] dev-libs/gmp-5.1.3-r1 to /tmp/stage1root/
[ebuild  N    ] sys-apps/coreutils-8.21 to /tmp/stage1root/
[ebuild  N    ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild  N    ] sys-devel/binutils-config-4-r2 to /tmp/stage1root/
[ebuild  N    ] sys-apps/sandbox-2.6-r1 to /tmp/stage1root/
[ebuild  N    ] app-misc/pax-utils-1.0.3 to /tmp/stage1root/
[ebuild  N    ] virtual/shadow-0 to /tmp/stage1root/
[ebuild  N    ] sys-apps/net-tools-1.60_p20130513023548 to /tmp/stage1root/
[ebuild  N    ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild  N    ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild  N    ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild  N    ] app-portage/portage-utils-0.53 to /tmp/stage1root/
[ebuild  N    ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild  N    ] dev-libs/mpfr-3.1.2_p10 to /tmp/stage1root/
[ebuild  N    ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild  N    ] sys-devel/bison-2.4.3 to /tmp/stage1root/
[ebuild  N    ] dev-libs/mpc-1.0.2-r1 to /tmp/stage1root/
[ebuild  N    ] sys-devel/binutils-2.24-r3 to /tmp/stage1root/
[ebuild  N    ] app-admin/eselect-1.4.4 to /tmp/stage1root/
[ebuild  N    ] app-eselect/eselect-python-20111108 to /tmp/stage1root/
[ebuild     U ] dev-lang/perl-5.20.2 [5.18.2-r2]
[ebuild  N    ] sys-kernel/linux-headers-3.18 to /tmp/stage1root/
[ebuild  N    ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild  N    ] dev-lang/perl-5.20.2 to /tmp/stage1root/
[ebuild  N    ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild  N    ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild  N    ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild  N    ] virtual/perl-File-Temp-0.230.400-r2 to /tmp/stage1root/
[ebuild  N    ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild  N    ] sys-libs/glibc-2.19-r1 to /tmp/stage1root/
[ebuild  N    ] dev-libs/libxml2-2.9.2-r1 to /tmp/stage1root/
[ebuild  N    ] dev-lang/python-2.7.9-r1 to /tmp/stage1root/
[ebuild  N    ] dev-lang/python-3.3.5-r1 to /tmp/stage1root/
[ebuild  N    ] sys-libs/readline-6.3_p8-r2 to /tmp/stage1root/
[ebuild  N    ] app-shells/bash-4.3_p33-r2 to /tmp/stage1root/
[ebuild  N    ] app-editors/nano-2.3.6 to /tmp/stage1root/
[ebuild  N    ] sys-devel/automake-1.14.1 to /tmp/stage1root/
[ebuild  N    ] sys-apps/portage-2.2.18 to /tmp/stage1root/
[ebuild  N    ] app-admin/perl-cleaner-2.19 to /tmp/stage1root/
[ebuild  N    ] app-admin/python-updater-0.11 to /tmp/stage1root/
[ebuild  N    ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild  N    ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild  N    ] net-misc/rsync-3.1.1 to /tmp/stage1root/
[ebuild  N    ] virtual/editor-0 to /tmp/stage1root/
[ebuild  N    ] net-misc/wget-1.16 to /tmp/stage1root/
[ebuild  N    ] sys-apps/less-458 to /tmp/stage1root/
[ebuild  N    ] virtual/libc-0 to /tmp/stage1root/
[ebuild  N    ] sys-devel/gcc-4.8.4 to /tmp/stage1root/
[ebuild  N    ] sys-devel/libtool-2.4.6 to /tmp/stage1root/
[ebuild  N    ] sys-devel/gettext-0.19.3 to /tmp/stage1root/

!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:

dev-lang/perl:0

  (dev-lang/perl-5.20.2:0/5.20::gentoo, ebuild scheduled for merge) pulled in by
    (no parents that aren't satisfied by other packages in this slot)

  (dev-lang/perl-5.18.2-r2:0/5.18::gentoo, installed) pulled in by
    dev-lang/perl:0/5.18=[-build(-)] required by (dev-perl/Locale-gettext-1.50.0-r1:0/0::gentoo, installed)
                 ^^^^^^^^                                                                                   
    (and 2 more with the same problem)



!!! The following installed packages are masked:
- dev-lang/perl-5.18.2-r2::gentoo (masked by: package.mask)
/usr/portage/profiles/package.mask:
# Andreas K. Huettel <dilfridge@gentoo.org> (29 Mar 2015)
# Mask Perl 5.18 for removal. Please upgrade to Perl 5.20
# Will be removed with the Perl 5.22 version bump.

For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.


!!! catalyst: run script failed.


Traceback (most recent call last):
  File "modules/generic_stage_target.py", line 1244, in run_local
    "run script failed.",env=self.env)
  File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
    raise CatalystError,myexc
CatalystError
None

!!! catalyst: Stage build aborting due to error.

Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
    mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
    apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
    raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/usr/local/catalyst/tmp/default/stage1-hppa1.1-20150529/.catalyst_lock'



Full build log at /tmp/catalyst-auto.bXzHzJ/log/hppa1.1_stage1.log