From: catalyst@lantean.jmbsvicetto.name
To: jmbsvicetto@gmail.com,gentoo-releng-autobuilds@lists.gentoo.org
Subject: [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - stage3-x32.spec
Date: Mon, 16 Mar 2015 14:10:19 +0000 (UTC) [thread overview]
Message-ID: <20150316141019.A0FA410FE7B@lantean.jmbsvicetto.name> (raw)
Setting storedir to config file value "/home/release/buildroot/amd64-dev"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache preserve_libs seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Preserving libs during unmerge.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage3
Building natively for amd64
Source path set to /home/release/buildroot/amd64-dev/tmp/default/stage2-x32-20150316/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /home/release/buildroot/amd64-dev/builds/default/stage2-x32-20150316.tar.bz2
Caching snapshot to /home/release/tmp/snapshots/20150316/
The autoresume path is /home/release/buildroot/amd64-dev/tmp/default/.autoresume-stage3-x32-20150316/
Location of the package cache is /home/release/buildroot/amd64-dev/packages/default/stage3-x32-20150316/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /home/release/buildroot/amd64-dev/tmp/default/.autoresume-stage3-x32-20150316/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /home/release/buildroot/amd64-dev/tmp/default/.autoresume-stage3-x32-20150316/
clearing chroot ...
Emptying directory /home/release/buildroot/amd64-dev/tmp/default/stage3-x32-20150316/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Starting rsync from /home/release/buildroot/amd64-dev/tmp/default/stage2-x32-20150316/
to /home/release/buildroot/amd64-dev/tmp/default/stage3-x32-20150316/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
Copying stage3-chroot.sh to /tmp
copying stage3-chroot.sh to /home/release/buildroot/amd64-dev/tmp/default/stage3-x32-20150316//tmp
copying chroot-functions.sh to /home/release/buildroot/amd64-dev/tmp/default/stage3-x32-20150316//tmp
Ensure the file has the executable bit set
Running stage3-chroot.sh in chroot /home/release/buildroot/amd64-dev/tmp/default/stage3-x32-20150316/
>>> Regenerating /etc/ld.so.cache...
Updating portage with USE=''
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 9) sys-libs/zlib-1.2.8-r1::gentoo
>>> Installing (1 of 9) sys-libs/zlib-1.2.8-r1::gentoo
>>> Emerging (2 of 9) sys-libs/gdbm-1.11::gentoo
>>> Installing (2 of 9) sys-libs/gdbm-1.11::gentoo
>>> Emerging (3 of 9) app-misc/mime-types-9::gentoo
>>> Installing (3 of 9) app-misc/mime-types-9::gentoo
>>> Emerging (4 of 9) sys-apps/debianutils-4.4::gentoo
>>> Installing (4 of 9) sys-apps/debianutils-4.4::gentoo
>>> Emerging (5 of 9) dev-libs/openssl-1.0.1k::gentoo
>>> Installing (5 of 9) dev-libs/openssl-1.0.1k::gentoo
>>> Emerging (6 of 9) app-misc/ca-certificates-20130906-r1::gentoo
>>> Installing (6 of 9) app-misc/ca-certificates-20130906-r1::gentoo
>>> Emerging (7 of 9) dev-lang/python-3.3.5-r1::gentoo
>>> Installing (7 of 9) dev-lang/python-3.3.5-r1::gentoo
>>> Emerging (8 of 9) dev-lang/python-2.7.9-r1::gentoo
>>> Installing (8 of 9) dev-lang/python-2.7.9-r1::gentoo
>>> Emerging (9 of 9) sys-apps/portage-2.2.14::gentoo
>>> Installing (9 of 9) sys-apps/portage-2.2.14::gentoo
* Messages for package app-misc/ca-certificates-20130906-r1:
* You should run update-ca-certificates manually after etc-update
* Messages for package sys-apps/portage-2.2.14:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
emerge --quiet --usepkg --buildpkg --newuse -e @system
[nomerge ] virtual/dev-manager-0
[nomerge ] virtual/udev-215 USE="-systemd"
[nomerge ] sys-fs/udev-216 USE="acl firmware-loader kmod -doc -gudev -introspection (-selinux) -static-libs" ABI_X86="64 (x32) (-32)"
[nomerge ] virtual/pkgconfig-0-r1 ABI_X86="64* (x32) (-32)"
[nomerge ] dev-util/pkgconfig-0.28-r1 USE="-hardened -internal-glib*" ABI_X86="64* (x32) (-32)"
[nomerge ] dev-libs/glib-2.42.2:2 USE="mime -dbus -debug (-fam) (-selinux) -static-libs -systemtap {-test} -utils -xattr" ABI_X86="64 (x32) (-32)" PYTHON_TARGETS="python2_7"
[ebuild N ] x11-misc/shared-mime-info-1.2-r1 USE="{-test}" 0 KiB
[ebuild R ] dev-util/pkgconfig-0.28-r1 USE="-hardened -internal-glib*" ABI_X86="64* (x32) (-32)" 0 KiB
[ebuild N ] dev-libs/glib-2.42.2:2 USE="mime -dbus -debug (-fam) (-selinux) -static-libs -systemtap {-test} -utils -xattr" ABI_X86="64 (x32) (-32)" PYTHON_TARGETS="python2_7" 0 KiB
[ebuild R ] virtual/pkgconfig-0-r1 ABI_X86="64* (x32) (-32)" 0 KiB
[ebuild N ] sys-fs/e2fsprogs-1.42.12 USE="nls -static-libs" 0 KiB
[ebuild R ] sys-apps/grep-2.21-r1 USE="nls* pcre* -static" 0 KiB
[ebuild N ] sys-process/procps-3.3.9-r2 USE="ncurses nls unicode (-selinux) -static-libs -systemd {-test}" 0 KiB
[ebuild N ] sys-apps/iproute2-3.17.0 USE="berkdb iptables ipv6 -atm -minimal (-selinux)" 0 KiB
[ebuild R ] net-misc/wget-1.16 USE="ipv6* nls* pcre* ssl* zlib* -debug -gnutls -idn -ntlm -static {-test} -uuid" 0 KiB
[nomerge ] sys-fs/udev-216 USE="acl firmware-loader kmod -doc -gudev -introspection (-selinux) -static-libs" ABI_X86="64 (x32) (-32)"
[ebuild N ] sys-apps/hwids-20141010 USE="net pci udev usb" 0 KiB
[ebuild N ] sys-fs/udev-216 USE="acl firmware-loader kmod -doc -gudev -introspection (-selinux) -static-libs" ABI_X86="64 (x32) (-32)" 0 KiB
[ebuild N ] virtual/ssh-0 USE="-minimal" 0 KiB
[ebuild N ] net-misc/openssh-6.7_p1 USE="bindist hpn pam pie -X -X509 -kerberos -ldap -ldns -libedit -sctp (-selinux) -skey -static" 0 KiB
[nomerge ] virtual/editor-0
[ebuild R ] app-editors/nano-2.3.6 USE="magic* ncurses* nls* spell* unicode -debug -justify -minimal -slang" 0 KiB
[nomerge ] virtual/man-0-r1
[ebuild N ] sys-apps/man-db-2.6.6 USE="berkdb gdbm nls zlib (-selinux) -static-libs" 0 KiB
[nomerge ] sys-apps/openrc-0.13.11 USE="ncurses netifrc pam unicode -debug -newnet (-prefix) (-selinux) -static-libs -tools"
[ebuild N ] net-misc/netifrc-0.2.2 0 KiB
[ebuild R ] net-misc/rsync-3.1.1 USE="acl* iconv* ipv6* -static -xattr" 0 KiB
[ebuild N ] virtual/service-manager-0 USE="(-prefix)" 0 KiB
[ebuild N ] sys-apps/openrc-0.13.11 USE="ncurses netifrc pam unicode -debug -newnet (-prefix) (-selinux) -static-libs -tools" 0 KiB
[ebuild N ] sys-apps/man-pages-3.79 USE="nls" LINGUAS="-da -de -fr -it -ja -nl -pl -ro -ru -zh_CN" 0 KiB
[ebuild N ] sys-apps/man-pages-posix-2013a 0 KiB
[ebuild N ] virtual/man-0-r1 0 KiB
[ebuild N ] virtual/dev-manager-0 0 KiB
[nomerge ] sys-fs/udev-216 USE="acl firmware-loader kmod -doc -gudev -introspection (-selinux) -static-libs" ABI_X86="64 (x32) (-32)"
[ebuild N ] sys-fs/udev-init-scripts-27 0 KiB
[ebuild N ] virtual/udev-215 USE="-systemd" 0 KiB
[nomerge ] sys-apps/man-db-2.6.6 USE="berkdb gdbm nls zlib (-selinux) -static-libs"
[ebuild N ] app-text/po4a-0.45-r1 USE="{-test}" 0 KiB
[ebuild N ] app-text/docbook-xml-dtd-4.1.2-r6:4.1.2 0 KiB
[ebuild N ] app-text/docbook-xsl-stylesheets-1.78.0-r1 USE="-ruby" 0 KiB
[ebuild N ] app-text/build-docbook-catalog-1.19.1 0 KiB
[ebuild N ] sys-apps/util-linux-2.25.2-r2 USE="cramfs ncurses nls pam suid unicode -caps -fdformat -python (-selinux) -slang -static-libs -systemd {-test} -tty-helpers -udev" ABI_X86="64 (x32) (-32)" PYTHON_SINGLE_TARGET="python2_7 -python3_3 -python3_4" PYTHON_TARGETS="python2_7 python3_3 -python3_4" 0 KiB
[ebuild N ] sys-apps/busybox-1.23.1-r1 USE="ipv6 pam static -debug -livecd -make-symlinks -math -mdev -savedconfig (-selinux) -sep-usr -syslog -systemd" 0 KiB
[nomerge ] virtual/shadow-0
[ebuild R ] sys-apps/shadow-4.1.5.1-r1 USE="acl* cracklib* nls* pam* -audit (-selinux) -skey -xattr" 0 KiB
[ebuild N ] sys-auth/pambase-20120417-r3 USE="cracklib sha512 -consolekit -debug -gnome-keyring -minimal -mktemp -pam_krb5 -pam_ssh -passwdqc (-selinux) -systemd" 0 KiB
[ebuild N ] sys-libs/pam-1.1.8-r2 USE="berkdb cracklib nls -audit -debug -nis (-selinux) {-test} -vim-syntax" ABI_X86="64 (x32) (-32)" 0 KiB
[nomerge ] sys-fs/udev-216 USE="acl firmware-loader kmod -doc -gudev -introspection (-selinux) -static-libs" ABI_X86="64 (x32) (-32)"
[ebuild N ] sys-libs/libcap-2.22-r2 USE="pam" ABI_X86="64 (x32) (-32)" 0 KiB
[ebuild N ] sys-apps/kbd-1.15.5-r1 USE="nls pam" 0 KiB
[ebuild N ] virtual/pam-0-r1 ABI_X86="64 (x32) (-32)" 0 KiB
Total: 37 packages (30 new, 7 reinstalls), Size of downloads: 0 KiB
* Error: circular dependencies:
(virtual/pkgconfig-0-r1:0/0::gentoo, ebuild scheduled for merge) depends on
(dev-util/pkgconfig-0.28-r1:0/0::gentoo, ebuild scheduled for merge) (runtime)
(dev-libs/glib-2.42.2:2/2::gentoo, ebuild scheduled for merge) (buildtime)
(app-text/docbook-xml-dtd-4.1.2-r6:4.1.2/4.1.2::gentoo, ebuild scheduled for merge) (buildtime)
(app-text/build-docbook-catalog-1.19.1:0/0::gentoo, ebuild scheduled for merge) (runtime)
(sys-apps/util-linux-2.25.2-r2:0/0::gentoo, ebuild scheduled for merge) (runtime)
(sys-libs/pam-1.1.8-r2:0/0::gentoo, ebuild scheduled for merge) (buildtime)
(virtual/pkgconfig-0-r1:0/0::gentoo, ebuild scheduled for merge) (buildtime)
It might be possible to break this cycle
by applying any of the following changes:
- dev-util/pkgconfig-0.28-r1 (Change USE: +internal-glib)
- sys-apps/util-linux-2.25.2-r2 (Change USE: -pam)
Note that this change can be reverted, once the package has been installed.
Note that the dependency graph contains a lot of cycles.
Several changes might be required to resolve all cycles.
Temporarily changing some use flag for all packages might be the better option.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1253, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1333, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1258, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage3
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/amd64-dev/tmp/default/stage3-x32-20150316/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.2xRHyC/log/stage3-x32.log
next reply other threads:[~2015-03-20 11:35 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-16 14:10 catalyst [this message]
-- strict thread matches above, loose matches on Subject: below --
2020-12-24 6:15 [gentoo-releng-autobuilds] [amd64-auto] Catalyst fatal build error - stage3-x32.spec catalyst
2020-08-10 18:47 catalyst
2020-08-06 6:22 catalyst
2020-08-03 6:57 catalyst
2019-12-09 1:58 catalyst
2018-09-17 8:53 catalyst
2017-12-25 12:00 catalyst
2017-12-23 12:49 catalyst
2017-10-26 3:25 catalyst
2017-03-23 19:06 catalyst
2017-03-08 10:15 catalyst
2016-08-18 17:05 catalyst
2015-03-30 14:36 catalyst
2015-03-09 14:05 catalyst
2015-02-26 8:16 catalyst
2015-02-23 10:37 catalyst
2015-01-12 12:12 catalyst
2015-01-05 12:02 catalyst
2014-12-29 12:04 catalyst
2014-12-15 14:25 catalyst
2014-12-07 5:06 catalyst
2014-12-01 15:12 catalyst
2014-11-24 11:32 catalyst
2014-11-17 11:09 catalyst
2014-11-10 16:00 catalyst
2014-11-03 9:56 catalyst
2014-10-27 10:31 catalyst
2014-07-28 12:00 catalyst
2014-04-03 16:12 catalyst
2014-03-31 11:26 catalyst
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150316141019.A0FA410FE7B@lantean.jmbsvicetto.name \
--to=catalyst@lantean.jmbsvicetto.name \
--cc=gentoo-releng-autobuilds@lists.gentoo.org \
--cc=jmbsvicetto@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox