[gentoo-releng-autobuilds] [ppc64-auto] Catalyst fatal build error - stage1-32ul.spec

[catalyst@timberdoodle.ppc64.dev.gentoo.org]

purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ppc64-32ul-20150315/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ppc64-32ul-20150315/

Starting tar extract from /var/tmp/catalyst/builds/default/stage3-ppc64-32ul-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-ppc64-32ul-20150315/ (This may take some time) ...

tar: XATTR support is not available
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at 
	/var/tmp/catalyst/snapshot_cache/20150315/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: XATTR support is not available
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20150315/.catalyst_lock'
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...

Warning!!!!
	Overriding certain env variables may cause catastrophic failure.
	If your build fails look here first as the possible problem.
	Catalyst assumes you know what you are doing when setting
		these variables.
	Catalyst Maintainers use VERY minimal envscripts if used at all
	You have been warned

--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-ppc64-32ul-20150315///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-ppc64-32ul-20150315//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-ppc64-32ul-20150315//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-ppc64-32ul-20150315/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --usepkg --buildpkg --newuse --oneshot --update --newuse sys-apps/portage

Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)


>>> Verifying ebuild manifests
>>> Emerging (1 of 2) dev-lang/python-exec-2.0.1-r1
>>> Installing (1 of 2) dev-lang/python-exec-2.0.1-r1
>>> Emerging (2 of 2) sys-apps/portage-2.2.14
>>> Installing (2 of 2) sys-apps/portage-2.2.14
 * Messages for package sys-apps/portage-2.2.14:
 * Could not find a UTF-8 locale. This may trigger build failures in
 * some python packages. Please ensure that a UTF-8 locale is listed in
 * /etc/locale.gen and run locale-gen.


Skipping seed stage update...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
 * Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
 * Initializing /tmp/stage1root/lib as a dir
 * Initializing /tmp/stage1root/usr/lib as a dir
 * Initializing /tmp/stage1root/usr/local/lib as a dir
 * Your system profile has SYMLINK_LIB=no, so that means you need to
 * have these paths configured as follows:
 * directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
 * The ebuild will attempt to fix these, but only for trivial conversions.
 * If things fail, you will need to manually create/move the directories.
 * Converting /tmp/stage1root/lib from a symlink to a dir
 * Converting /tmp/stage1root/usr/lib from a symlink to a dir
 * Converting /tmp/stage1root/usr/local/lib from a symlink to a dir


emerge --quiet --usepkg --buildpkg --newuse --oneshot virtual/libc sys-devel/binutils sys-devel/autoconf app-arch/xz-utils virtual/package-manager sys-devel/flex virtual/editor sys-apps/gawk virtual/os-headers app-arch/tar sys-devel/gettext sys-devel/automake net-misc/wget sys-apps/grep sys-devel/bison sys-apps/makedev sys-apps/diffutils virtual/shadow sys-apps/sed virtual/pkgconfig net-misc/rsync sys-devel/gcc sys-devel/make app-arch/gzip sys-devel/gnuconfig sys-apps/coreutils sys-devel/patch app-arch/bzip2 app-shells/bash sys-apps/which sys-apps/less sys-apps/net-tools sys-apps/baselayout sys-apps/file sys-devel/libtool sys-apps/findutils 
[ebuild  N    ] sys-libs/ncurses-5.9-r3 to /tmp/stage1root/
[ebuild  N    ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild  N    ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild  N    ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild  N    ] sys-devel/gnuconfig-20140728 to /tmp/stage1root/
[ebuild  N    ] virtual/libintl-0-r1 to /tmp/stage1root/
[ebuild  N    ] app-arch/xz-utils-5.0.8 to /tmp/stage1root/
[ebuild  N    ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild  N    ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild  N    ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild  N    ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild  N    ] sys-libs/timezone-data-2014j to /tmp/stage1root/
[ebuild  N    ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild  N    ] sys-devel/binutils-config-3-r3 to /tmp/stage1root/
[binary  N    ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild  N    ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild  N    ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild  N    ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild  N    ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild  N    ] sys-devel/make-4.1-r1 to /tmp/stage1root/
[ebuild  N    ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild  N    ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild  N    ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild   R   ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild  N    ] sys-apps/findutils-4.4.2-r1 to /tmp/stage1root/
[ebuild  N    ] sys-devel/automake-wrapper-9 to /tmp/stage1root/
[ebuild  N    ] dev-libs/expat-2.1.0-r3 to /tmp/stage1root/
[ebuild  N    ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild  N    ] dev-util/pkgconfig-0.28-r1 to /tmp/stage1root/
[ebuild  N    ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild  N    ] dev-libs/gmp-5.1.3-r1 to /tmp/stage1root/
[ebuild  N    ] sys-apps/coreutils-8.21 to /tmp/stage1root/
[ebuild  N    ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild  N    ] sys-apps/sandbox-2.6-r1 to /tmp/stage1root/
[ebuild  N    ] app-misc/pax-utils-0.8.1 to /tmp/stage1root/
[ebuild  N    ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild  N    ] virtual/shadow-0 to /tmp/stage1root/
[ebuild  N    ] sys-apps/less-458 to /tmp/stage1root/
[ebuild  N    ] sys-apps/net-tools-1.60_p20130513023548 to /tmp/stage1root/
[ebuild  N    ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild  N    ] dev-libs/libltdl-2.4.4 
[ebuild  N    ] dev-libs/libltdl-2.4.4 to /tmp/stage1root/
[ebuild  N    ] app-portage/portage-utils-0.53 to /tmp/stage1root/
[ebuild  N    ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild  N    ] dev-libs/mpfr-3.1.2-r1 to /tmp/stage1root/
[ebuild  N    ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild  N    ] sys-devel/bison-2.4.3 to /tmp/stage1root/
[ebuild  N    ] dev-libs/mpc-1.0.2-r1 to /tmp/stage1root/
[ebuild  N    ] sys-devel/binutils-2.24-r3 to /tmp/stage1root/
[ebuild  N    ] app-admin/eselect-1.4.4 to /tmp/stage1root/
[ebuild  N    ] app-admin/eselect-python-20111108 to /tmp/stage1root/
[ebuild  N    ] sys-kernel/linux-headers-3.16 to /tmp/stage1root/
[ebuild  N    ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild  N    ] dev-lang/perl-5.20.1-r4 to /tmp/stage1root/
[ebuild  N    ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild  N    ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild  N    ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild  N    ] virtual/perl-File-Temp-0.230.400-r2 to /tmp/stage1root/
[ebuild  N    ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild  N    ] sys-devel/automake-1.13.4 to /tmp/stage1root/
[ebuild  N    ] sys-devel/libtool-2.4.4 to /tmp/stage1root/
[ebuild  N    ] sys-libs/glibc-2.19-r1 to /tmp/stage1root/
[ebuild  N    ] sys-libs/readline-6.2_p5-r1 to /tmp/stage1root/
[ebuild  N    ] app-shells/bash-4.2_p53 to /tmp/stage1root/
[ebuild  N    ] app-editors/nano-2.3.6 to /tmp/stage1root/
[ebuild  N    ] dev-libs/libxml2-2.9.2 to /tmp/stage1root/
[ebuild  N    ] dev-lang/python-3.3.5-r1 to /tmp/stage1root/
[ebuild  N    ] dev-lang/python-2.7.9-r1 to /tmp/stage1root/
[ebuild  N    ] sys-apps/portage-2.2.14 to /tmp/stage1root/
[ebuild  N    ] app-admin/perl-cleaner-2.19 to /tmp/stage1root/
[ebuild  N    ] app-admin/python-updater-0.11 to /tmp/stage1root/
[ebuild  N    ] virtual/libc-0 to /tmp/stage1root/
[ebuild  N    ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild  N    ] virtual/editor-0 to /tmp/stage1root/
[ebuild  N    ] net-misc/wget-1.16 to /tmp/stage1root/
[ebuild  N    ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild  N    ] net-misc/rsync-3.0.9-r3 to /tmp/stage1root/
[ebuild  N    ] sys-devel/gcc-4.8.3 to /tmp/stage1root/
[ebuild  N    ] sys-devel/gettext-0.19.3 to /tmp/stage1root/
[blocks B     ] <sys-devel/libtool-2.4.3-r2:2 ("<sys-devel/libtool-2.4.3-r2:2" is blocking dev-libs/libltdl-2.4.4)

 * Error: The above package list contains packages which cannot be
 * installed at the same time on the same system.

  (dev-libs/libltdl-2.4.4:0/0::gentoo, ebuild scheduled for merge) pulled in by
    dev-libs/libltdl:0 required by (sys-devel/libtool-2.4.4:2/2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')

  (sys-devel/libtool-2.4.2-r1:2/2::gentoo, installed) pulled in by
    >=sys-devel/libtool-2.4 required by (dev-libs/libxml2-2.9.2:2/2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
    >=sys-devel/libtool-2.4 required by (net-misc/wget-1.16:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')


!!! catalyst: run script failed.


Traceback (most recent call last):
  File "modules/generic_stage_target.py", line 1244, in run_local
    "run script failed.",env=self.env)
  File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
    raise CatalystError,myexc
CatalystError
None

!!! catalyst: Stage build aborting due to error.

Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
    mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
    apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
    raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ppc64-32ul-20150315/.catalyst_lock'



Full build log at /tmp/catalyst-auto.1sercU/log/stage1-32ul.log